Recent advances and future trends on molecularly imprinted polymer-based fluorescence sensors with luminescent carbon dots

An organic-inorganic polyacrylamide-based surface imprinted quantum dots for the impedimetric and voltammetric detection of diazepam in saliva with smartphone readout

Diazepam (DZP) is a muscle-relaxing, anxiety-relieving sedative drug; nonetheless, it is also an addictive drug that may be abused. This work reports on the development of a novel electrochemical nanosensor for diazepam using SiO2-encapsulated-3-mercaptopropionic acid-capped AuZnCeSeS quantum dots (QDs) overcoated with a molecularly imprinted polymer (MIP) on screen-printed carbon electrodes (SPCEs). Electrochemical, spectroscopic and electron microscopic characterization of the nanomaterial and modified electrode surface was carried out and is reported herein. Specifically, electrochemical characterization of the QDs/SPCE using cyclic voltammetry (CV) revealed that the QDs exhibit a higher electrode surface area whilst electrochemical impedance spectroscopy (EIS) characterization demonstrated a lower charge transfer resistance (Rct). To fabricate the electrochemical nanosensor, firstly, alloyed AuZnCeSeS QDs were synthesized in the organic phase and thereafter capped with 3-mercaptopropionic acid (MPA) via a ligand exchange reaction. The MPA-AuZnCeSeS QDs were encapsulated in a SiO2 layer to form a SiO2-MPA AuZnCeSeS QDs system. The QDs were drop-casted onto SPCEs to form a SiO2-MPA AuZnCeSeS QDs/SPCE transducer interface. Organic based acrylamide, used as a functional monomer, was electropolymerized via CV on the QDs/SPCE in the presence of the diazepam template with ethylene glycol dimethacrylate as a crosslinker and 2,2'-azobis(2-methylpropionitrile) as an initiator. Under optimum experimental conditions, DZP was detected using EIS and square wave voltammetry (SWV). Using a portable potentiostat and a hand-held smartphone-based potentiostat, DZP was quantitatively detected in saliva using the MIP@QDs/SPCE with a limit of detection (LOD) of 2.3 μM and 2.7 μM, respectively. The LOD for DZP from SWV analysis was 1.0 μM.

Structure-based design and screening of hydrogel copolymer/Fe3O4 composite microspheres for magnetic solid phase extraction of bisphenol A from aqueous samples

It is of great significance to monitor bisphenol A (BPA) in the environment because of its potential environmental and health risks. However, the detection of trace or ultratrace BPA in complicated environmental samples is challenging due to the relatively low affinity and poor selectivity of existing adsorbents used in sample pretreatment. Herein, we report a high-affinity, low environment-dependent and strong interference-resistant abiotic affinity ligand, a N-methacryloyl-l-lysine-NH2 (MLys)-based hydrogel copolymer (HP 17) screened from a small focused polymer library engineered by incorporating various combinations and ratios of candidate functional monomers. The selection of these monomers was guided by molecular mechanism between BPA and the ligand-binding pocket of its estrogen receptors. The BPA-HP17 binding is mainly a synergistic effect of π-cation and hydrophobic interactions. The screened HP 17 has high adsorption capacity (349.4 mg/g) for BPA under wide pH (3.0-10.0) and ionic strength (0-150 mM) range. To improve its practicability, a hydrogel copolymer/Fe3O4 composite microspheres (Fe3O4@HP 17) was synthesized and applied for magnetic solid phase extraction-high-performance liquid chromatography (MSPE-HPLC) analysis of BPA in tap water, lake water and industrial effluents. The method shows wide linear range (2.5⁓100 ng/mL), high sensitivity (detection limit of 0.22 ng/mL even without further concentration after desorption), high accuracies (92.6⁓103.0 %) and good precisions (0.57⁓4.53 %), indicating a great potential of this material and method in the detection of trace or ultratrace BPA in complex environmental water samples.

Biowaste-Derived Carbon Dots-Based Molecularly Imprinted Fluorescent Nanosensor for Selective Detection of Rutin

In this work, Waste pine nut shells were used as organic carbon source of biomass to synthesize carbon quantum dots. A highly responsive and selective fluorescent nanosensor (Si-doped biomass-derived carbon dots with molecular imprinted polymers, Si-CDs@MIPs) was designed for determination of Rutin (RT) in Chinese herbal substances like Sophora japonica L.. Not only was the synthesis method simple, environmentally friendly but also can selectively capture and specifically recognize the target compound RT, which was accomplished by a single-step hydrothermal process. The RT content in the real sample is 21%, with a recovery rate ranging from 89.7 to 106.3%, demonstrating excellent reproducibility. The nanosensor can selectively detect RT at a detection limit of 12.5 nmol/L. Therefore, it is showed that Si-CDs@MIPs will be feasible as a sensor for the rapid measurement of RT.

Preparation of molecular imprinted fluorescence sensor based on Er3+/ZnS QDs and its selective detection of ciprofloxacin in various matrices

BACKGROUND

Ciprofloxacin is a widely used antibiotic in medicine and agriculture. It can cause pollution to the environment and food, thereby affecting human health.

OBJECTIVE

This study proposes the preparation of molecular imprinted fluorescent sensors and their selective detection of ciprofloxacin, with the aim of achieving specific recognition and accurate detection of ciprofloxacin.

METHODS

Rare earth metal Er3+ is added to ZnS quantum dots to prepare a molecularly imprinted fluorescence sensor (MIP/Er3+/ZnS QDs). The effects of substance concentration, pH value, and time on the fluorescence detection intensity are analyzed to determine the optimal fluorescence detection conditions.

RESULTS

Experimental results showed that the sensor accurately detected ciprofloxacin with a detection limit of 31 nmol/L and the linear range of 0.1-10 μmol/L. The sensor had a recovery rate of 99.7% to 103.5% for ciprofloxacin in milk samples, with a relative standard deviation of less than 5%, indicating accurate determination of ciprofloxacin content.

CONCLUSION

Molecularly imprinted fluorescent sensors have enormous application potential in the monitoring and control of ciprofloxacin, and are of great significance for ensuring environmental and food safety.

Oriented surface imprinted 96-well microplate-based fluorescent biosensor for glycoprotein detection by boronate affinity sandwich assay

Glycoproteins perform vital functions in numerous biological processes and have important clinical implications. Many glycoproteins have been used as biomarkers and therapeutic targets for disease diagnosis. Due to low concentration of glycoprotein biomarkers and the presence of high-abundance interfering species in biological samples, a selective and sensitive detection method for glycoprotein is essential for real-world applications. In this study, we develop an oriented surface imprinted microplate-based fluorescent biosensor by boronate-affinity sandwich assay (BASA) for the specific, sensitive and high throughput determination of glycoproteins in complex samples. The structure of the BASA is based on sandwich formation between boronate affinity-oriented surface-imprinted microplates, target glycoproteins, and boronate affinity fluorescence probes. The imprinted microplates ensure the high specificity, high affinity and high throughput, while the fluorescence probes, consisting of boronic acid-modified CdTe QDs, provide high sensitivity. The proposed approach could exhibit a wide linear range of 1 ng/mL-105 ng/mL, with a low LOD of 0.528 ng/mL using horseradish peroxidase (HRP) as a model glycoprotein. As compared with traditional "turn off" fluorescent sensor, the developed "turn on" fluorescent sensor provided three orders of magnitude higher sensitivity at least. The fluorescent biosensor achieved average recoveries ranging from 96.8 % to 106.0 % in urine samples.

Fabrication of Anthocyanidin-Encapsulated Polyvinyl Alcohol Nanofibrous Membrane for Smart Packaging

Smart colorimetric packaging has been an important method to protect human health from external hazardous agents. However, the currently available colorimetric detectors use synthetic dye probes, which are costly, toxic, difficult to prepare, and non-biodegradable. Herein, an environmentally friendly cellulose nanocrystal (CNC)-supported polyvinyl alcohol (PVA) nanofibrous membrane was developed for the colorimetric monitoring of food spoilage. Anthocyanidin (ACY) is a naturally occurring spectroscopic probe that was isolated from pomegranate (Punica granatum L.). By encapsulating the anthocyanin probe in electrospun polyvinyl alcohol fibers in the presence of a mordant (M), M/ACY nanoparticles were generated. After exposure to rotten shrimp, an investigation on the colorimetric changes from purple to green for the smart nanofibrous fabric was conducted using the coloration parameters and absorbance spectra. In response to increasing the length of exposure to rotten shrimp, the absorption spectra of the anthocyanin-encapsulated nanofibrous membrane showed a wavelength blueshift from 580 nm to 412 nm. CNC displayed a diameter of 12-17 nm. The nanoparticle diameter of M/ACY was monitored in the range of 8-13 nm, and the nanofiber diameter was shown in the range of 70-135 nm. Slight changes in comfort properties were monitored after encapsulating M/ACY in the nanofibrous fabric.

Current Challenges in Monitoring Low Contaminant Levels of Per- and Polyfluoroalkyl Substances in Water Matrices in the Field

The Environmental Protection Agency (EPA) of the United States recently released the first-ever federal regulation on per- and polyfluoroalkyl substances (PFASs) for drinking water. While this represents an important landmark, it also brings about compliance challenges to the stakeholders in the drinking water industry as well as concerns to the general public. In this work, we address some of the most important challenges associated with measuring low concentrations of PFASs in drinking water in the field in real drinking water matrices. First, we review the "continuous monitoring for compliance" process laid out by the EPA and some of the associated hurdles. The process requires measuring, with some frequency, low concentrations (e.g., below 2 ppt or 2 ng/L) of targeted PFASs, in the presence of many other co-contaminants and in various conditions. Currently, this task can only (and it is expected to) be accomplished using specific protocols that rely on expensive, specialized, and laboratory-scale instrumentation, which adds time and increases cost. To potentially reduce the burden, portable, high-fidelity, low-cost, real-time PFAS sensors are desirable; however, the path to commercialization of some of the most promising technologies is confronted with many challenges, as well, and they are still at infant stages. Here, we provide insights related to those challenges based on results from ab initio and machine learning studies. These challenges are mainly due to the large amount and diversity of PFAS molecules and their multifunctional behaviors that depend strongly on the conditions of the media. The impetus of this work is to present relevant and timely insights to researchers and developers to accelerate the development of suitable PFAS monitoring systems. In addition, this work attempts to provide water system stakeholders, technicians, and even regulators guidelines to improve their strategies, which could ultimately translate in better services to the public.

One-Pot Preparation of Ratiometric Fluorescent Molecularly Imprinted Polymer Nanosensor for Sensitive and Selective Detection of 2,4-Dichlorophenoxyacetic Acid

The development of fluorescent molecular imprinting sensors for direct, rapid, and sensitive detection of small organic molecules in aqueous systems has always presented a significant challenge in the field of detection. In this study, we successfully prepared a hydrophilic colloidal molecular imprinted polymer (MIP) with 2,4-dichlorophenoxyacetic acid (2,4-D) using a one-pot approach that incorporated polyglycerol methacrylate (PGMMA-TTC), a hydrophilic macromolecular chain transfer agent, to mediate reversible addition-fragmentation chain transfer precipitation polymerization (RAFTPP). To simplify the polymerization process while achieving ratiometric fluorescence detection, red fluorescent CdTe quantum dots (QDs) and green fluorescent nitrobenzodiazole (NBD) were introduced as fluorophores (with NBD serving as an enhancer to the template and QDs being inert). This strategy effectively eliminated background noise and significantly improved detection accuracy. Uniform-sized MIP microspheres with high surface hydrophilicity and incorporated ratiometric fluorescent labels were successfully synthesized. In aqueous systems, the hydrophilic ratio fluorescent MIP exhibited a linear response range from 0 to 25 μM for the template molecule 2,4-D with a detection limit of 0.13 μM. These results demonstrate that the ratiometric fluorescent MIP possesses excellent recognition characteristics and selectivity towards 2,4-D, thus, making it suitable for selective detection of trace amounts of pesticide 2,4-D in aqueous systems.

A new PdMOF-loaded molecularly imprinted polyaniline nanocatalytic probe for ultratrace oxytetracycline with SERS technique

In this paper, a new Pd metal organic framework (PdMOF) surface molecularly imprinted polyaniline nanocatalytic probe (PdMOF@MIP) with dual functions of recognition and catalysis was synthesized. It is found that the PdMOF@MIP nanoprobe can not only identify OTC but also catalyze the new nanoreaction of NaH2PO2-HAuCl4 to generate gold nanoparticles (AuNPs), and the generated AuNPs could be traced by surface-enhanced Raman scattering (SERS). When OTC specifically binds to PdMOF@MIP to generate PdMOF@MIP-OTC conjugate, its catalytic effect is weakened and the analytical signal is reduced linaerly. Accordingly, a new, highly sensitive, selective and simple SERS/RRS/Abs trimode detection platform for OTC was constructed. The linear range of SERS was 0.0625 ng/mL ∼ 1.75 ng/mL and the limit of detection was 0.015 ng/mL. This new nanocatalytic probe detection strategy can also be used for the selective detection of other antibiotics such as tetracycline and doxycycline, respectively. In addition, the nanocatalytic mechanism has been investigated.

Fundamentals, Synthetic Strategies and Applications of Non-Covalently Imprinted Polymers

Molecular imprinting has emerged as an important and practical technology to create economical and stable synthetic mimics of antibodies and enzymes. It has already found a variety of important applications, such as affinity separation, chemical/biological sensing, disease diagnostics, proteomics, bioimaging, controlled drug release, and catalysis. In the past decade, significant breakthroughs have been made in non-covalently imprinted polymers, from their synthesis through to their applications. In terms of synthesis, quite a few versatile and facile imprinting approaches for preparing MIPs have been invented, which have effectively solved some key issues in molecular imprinting. Additionally, important applications in several areas, such as sensors, proteomics and bioimaging, have been well demonstrated. In this review, we critically and comprehensively survey key recent advances made in the preparation of non-covalently imprinted polymers and their important applications. We focus on the state-of-art of this technology from three different perspectives: fundamentals, synthetic strategies, and applications. We first provide a fundamental basis for molecular imprinting technologies that have been developed, which is extremely helpful for establishing a sound understanding of the challenges in molecular imprinting. Then, we discuss in particular the major breakthroughs within the last ten years (2014-2024), with emphasis on new imprinting approaches, what strengths the breakthroughs can provide, and which new applications the properties of the prepared non-covalently imprinted polymers are fit for.

Detection and adsorption of florfenicol in milk using bifunctional carbon dot-doped molecularly imprinted polymers

Detection of florfenicol (FF) residues in animal-derived foods, as one of the most widely used antibiotics, is critically important to food safety. The fluorescent molecularly imprinted polymer (MIP) was synthesized by surface-initiated atom transfer radical polymerization technique with poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) microspheres, 4-vinylpyridine, ethylene glycol dimethacrylate, and FF as the matrix, functional monomer, crosslinker, and template molecule, respectively. Meanwhile, N-S co-doped carbon dot (CD) was synthesized with triammonium citrate and thiourea as precursors under microwave irradiation at 400 W for 2.5 min and then integrated into FF-MIP to obtain CD@FF-MIP. For comparison, non-imprinted polymer (NIP) without FF was also prepared. The adsorption capacity of CD@FF-MIP to FF reached 53.1 mg g-1, which was higher than that of FF-MIP (34.7 mg g-1), whereas the adsorption capacity of NIP was only 17.3 mg g-1. The adsorption equilibrium of three materials was reached within 50 min. Particularly, CD@FF-MIP exhibited an excellent fluorescence quenching response to FF in the concentration range of 3-50 µmol L-1. As a result, CD@FF-MIP was successfully utilized to extract FF in milk samples, which were analyzed by high-performance liquid chromatography. The standard recoveries were 95.8%-98.2%, and the relative standard deviation was 1.6%-4.2%. The method showed the advantages of simple operation, high sensitivity, excellent selectivity, and low cost, and also demonstrated a great application prospect in food detection.

Biomass-derived carbon dots as emerging visual platforms for fluorescent sensing

Biomass-derived carbon dots (CDs) are non-toxic and fluorescently stable, making them suitable for extensive application in fluorescence sensing. The use of cheap and renewable materials not only improves the utilization rate of waste resources, but it is also drawing increasing attention to and interest in the production of biomass-derived CDs. Visual fluorescence detection based on CDs is the focus of current research. This method offers high sensitivity and accuracy and can be used for rapid and accurate determination under complex conditions. This paper describes the biomass precursors of CDs, including plants, animal remains and microorganisms. The factors affecting the use of CDs as fluorescent probes are also discussed, and a brief overview of enhancements made to the preparation process of CDs is provided. In addition, the application prospects and challenges related to biomass-derived CDs are demonstrated.

Sensory Polymers: Trends, Challenges, and Prospects Ahead

In recent years, sensory polymers have evolved significantly, emerging as versatile and cost-effective materials valued for their flexibility and lightweight nature. These polymers have transformed into sophisticated, active systems capable of precise detection and interaction, driving innovation across various domains, including smart materials, biomedical diagnostics, environmental monitoring, and industrial safety. Their unique responsiveness to specific stimuli has sparked considerable interest and exploration in numerous applications. However, along with these advancements, notable challenges need to be addressed. Issues such as wearable technology integration, biocompatibility, selectivity and sensitivity enhancement, stability and reliability improvement, signal processing optimization, IoT integration, and data analysis pose significant hurdles. When considered collectively, these challenges present formidable barriers to the commercial viability of sensory polymer-based technologies. Addressing these challenges requires a multifaceted approach encompassing technological innovation, regulatory compliance, market analysis, and commercialization strategies. Successfully navigating these complexities is essential for unlocking the full potential of sensory polymers and ensuring their widespread adoption and impact across industries, while also providing guidance to the scientific community to focus their research on the challenges of polymeric sensors and to understand the future prospects where research efforts need to be directed.

Bifunctional fluorescent molecularly imprinted resin based on carbon dot for selective detection and enrichment of 2,4-dichlorophenoxyacetic acid in lettuce

The work provided a method for synthesizing a simple fluorescent molecularly imprinted polymer by surface-initiated atom transfer radical polymerization (SI-ATRP) and its application in real sample. Poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) microspheres were selected as a matrix, 4-vinylpyridine, ethylene glycol dimethacrylate, 2,4-dichlorophenoxyacetic acid (2,4-D) as functional monomer, cross-linker and template molecule, respectively, to fabricate MAR@MIP with core-shell structure. For comparison, carbon dot (CD) as a fluorescence source was synthesized with o-phenylenediamine and tryptophan as precursors via hydrothermal method and integrated into MIP to acquire MAR@CD-MIP. MAR@CD-NIP was also prepared without adding the template molecule. The adsorption capacity of MAR@CD-MIP reached 104 mg g-1 for 2,4-D, which was higher than that of MAR@MIP (60 mg g-1). However, the adsorption capacity of MAR@CD-NIP was only 13.2 mg g-1. The linear range of fluorescence detection for 2,4-D was 18-72 μmol/L, and the limit of detection (LOD) was 0.35 μmol/L. The fluorescent MAR@CD-MIP was successfully applied in enrichment of lettuce samples. The recoveries of the three spiked concentrations of 2,4-D in lettuce were tested by fluorescence spectrophotometry and ranged in 97.3-101.7 %. Meanwhile, the results were also verified by HPLC. As a result, bi-functional molecularly imprinted resin was successfully fabricated to detect and enrich 2,4-D in real samples, and exhibited good selectivity, sensitivity and great application prospect in food detection.

Wavelength-dependent photoelectrochemical response demonstrated by the determination of acetaminophen and rutin in differential molecularly imprinted polymers strategy

Herein, the excitation wavelength-dependent responses of the molecularly imprinted polymer (MIP) photoelectrochemical (PEC) sensors were investigated, using acetaminophen (AP), rutin (RT) and perfluorooctanoate (PFOA) as the model templates, pyrrole as functional monomer, CuInS2@ZnS/TiO2 NTs as the basic photoelectrode. With wavelength λ > 240 nm, the photocurrent of MIPPFOA enhanced at higher concentrations of PFOA. With increasing AP concentration, the photocurrents of MIPAP could decline with λ < 271 nm, not change at λ = 270 nm, or increase with λ > 270 nm. As RT concentration increased, the photocurrents of MIPRT could decrease (λ < 431 nm), not change (λ = 431 nm) or increase (λ > 431 nm). The PEC responses depend on the comprehensive interaction of two contrary mechanisms from the template molecules within the MIP membrane. The photocurrent is enhanced by the role of the electron donor for photo-generated holes but attenuated due to the steric hindrance effect and the excitation light intensity loss via absorption or scattering. The apparent molar absorption coefficient of AP and RT within MIP membranes are 9.1-19.4 folds of those measured from dilute solutions. By using a routine UV lamp as the light source, the photocurrents of MIPRT at 254 nm and MIPAP at 365 nm were used to determine RT and AP, with the detection limits of 5.3 and 16 nM, respectively. The interference from the non-specific adsorption of interferents on the surfaces of MIPAP and MIPRT was reduced by one order of magnitude via a differential strategy.

Carbon Dots and Their Polymeric Nanocomposites: Insight into Their Synthesis, Photoluminescence Mechanisms, and Recent Trends in Sensing Applications

Carbon dots (CDs), a novel class of carbon-based nanoparticles, have received a lot of interest recently due to their exceptional mechanical, chemical, and fluorescent properties, as well as their excellent photostability and biocompatibility. CDs' emission properties have already found a variety of potential applications, in which bioimaging and sensing are major highlights. It is widely acknowledged that CDs' fluorescence and surface conditions are closely linked. However, due to the structural complexity of CDs, the specific underlying process of their fluorescence is uncertain and yet to be explained. Because of their low toxicity, robust and wide optical absorption, high chemical stability, rapid transfer characteristics, and ease of modification, CDs have been recognized as promising carbon nanomaterials for a variety of sensing applications. Thus, following such outstanding properties of CDs, they have been mixed and imprinted onto different polymeric components to achieve a highly efficient nanocomposite with improved functional groups and properties. Here, in this review, various approaches and techniques for the preparation of polymer/CDs nanocomposites have been elaborated along with the individual characteristics of CDs. CDs/polymer nanocomposites recently have been highly demanded for sensor applications. The insights from this review are detailed sensor applications of polymer/CDs nanocomposites especially for detection of different chemical and biological analytes such as metal ions, small organic molecules, and several contaminants.

T790M mutation upconversion fluorescence biosensor via mild ATRP strategy and site-specific DNA cleavage of restriction endonuclease

A unique combination of a specific nucleic acid restriction endonuclease (REase) and atom transfer radical polymerization (ATRP) signal amplification strategy was employed for the detection of T790M mutations prevalent in the adjuvant diagnosis of lung cancer. REase selectively recognizes and cleaves T790M mutation sites on double-stranded DNA formed by hybridization of a capture sequence and a target sequence. At the same time, the ATRP strategy resulted in the massive aggregation of upconverted nanoparticles (UCNPs), which significantly improved the sensitivity of the biosensor. In addition, the UCNPs have excellent optical properties and can eliminate the interference of autofluorescence in the samples, thus further improving the detection sensitivity. The proposed upconversion fluorescent biosensor is characterized by high specificity, high sensitivity, mild reaction conditions, fast response time, and a detection limit as low as 0.14 fM. The performance of the proposed biosensor is comparable to that of clinical PCR methods when applied to clinical samples. This work presents a new perspective for assisted diagnosis in the pre-intervention stage of tumor diagnostics in the early stage of precision oncology treatments.

Research progress on preparation methods and sensing applications of molecularly imprinted polymer-aptamer dual recognition elements

The aptamer (Apt) and the molecularly imprinted polymer (MIP), as effective substitutes for antibodies, have received widespread attention from researchers because of their creation. However, the low stability of Apt in harsh detection environment and the poor specificity of MIP have hindered their development. Therefore, some researchers have attempted to combine MIP with Apt to explore whether the effect of "1 + 1 > 2" can be achieved. Since its first report in 2013, MIP-Apt dual recognition elements have become a highly focused research direction in the fields of biology and chemistry. MIP-Apt dual recognition elements not only possess the high specificity of Apt and the high stability of MIP in harsh detection environment, but also have high sensitivity and affinity. They have been successfully applied in medical diagnosis, food safety, and environmental monitoring fields. This article provides a systematic overview of three preparation methods for MIP-Apt dual recognition elements and their application in eight different types of sensors. It also provides effective insights into the problems and development directions faced by MIP-Apt dual recognition elements.

Ultrasensitive fluorescence detection of gonyautoxins in seawater using a novel molecularly imprinted nanoprobe

Gonyautoxins (GTXs), a group of potent neurotoxins belonging to paralytic shellfish toxins (PSTs), are often associated with harmful algal blooms of toxic dinoflagellates in the sea and represent serious health and ecological concerns worldwide. In the study, a highly selective and sensitive fluorescence nanoprobe was constructed based on photoinduced electron transfer recognition mechanism to rapidly detect GTXs in seawater, using specific entrapment of molecularly imprinted polymers (MIPs) combined with fluorescence analyses. The green emissive fluorescein isothiocyanate was grafted in a silicate matrix as a signal transducer and fluorescence intensity of the nanoprobe with a core-shell structure exhibited a strong enhancement due to efficient analyte blockage in a short response time. Under optimal conditions, the developed MIPs nanoprobe presented an excellent analytical performance for spiked seawater samples including a recovery from 94.44 % to 98.23 %, a linear range between 0.018 nmol L-1 and 0.36 nmol L-1, as well as good accuracy. Furthermore, the method had extremely high sensitivity, with limit of detection obtained as 0.005 nmol L-1 for GTXs and GTX2/3. Finally, the nanoprobe was applied for the determination of GTXs in seven natural seawater samples with GTXs mixture (0.035-0.058 nmol L-1) or single GTX2/3 (0.033-0.050 nmol L-1), and the results agreed well with those of a UPLC-MS/MS method. The findings of our study suggest that the constructed MIPs-based fluorescence enhancement nanoprobe was suitable for rapid, selective and ultrasensitive detection of GTXs, particular GTX2/3, in natural seawater samples.

Emerging trends in sensors based on molecular imprinting technology: Harnessing smartphones for portable detection and recognition

Molecular imprinting technology (MIT) has become a promising recognition technology in various fields due to its specificity, high efficiency, stability and eco-friendliness in the recognition of target. Molecularly imprinted polymers (MIPs), known as 'artificial receptors', are shown similar properties to natural receptors as a biomimetic material. The selectivity of recognition for targets can be greatly improved when MIPs are introduced into sensors, as known that MIPs, are suitable for the pretreatment and analysis of trace substances in complex matrix samples. At present, various sensors has been developed by the combination with MIPs for detecting and identifying trace compounds, biological macromolecules or other substances, such as optical, electrochemical and piezoelectric sensors. Smart phones, with their built-in sensors and powerful digital imaging capabilities, provide a unique platform for the needs of portability and instant detection. MIP sensors based on smart phones are expected to become a new research direction in the future. This review discusses the latest applications of MIP sensors in the field of detection and recognition in recent years, summarizes the frontier progress of MIP sensor research based on smart phones in the past two years, and points out the challenges, limitations and future development prospects.

Tailoring molecular recognition in predesigned multifunctional enzyme mimicking porphyrin imprinted interface for high affinity and differential selectivity; sensing etoposide in lung cancer patients

Nanozymes are cost-effective and robust but they lack specificity and selectivity, limiting their potential practical applications. Herein, molecularly imprinted polymers (MIPs) were grown in combination with multifunctional 5,10,15,20-tetrakis(4-hydroxyphenyl)-21H,23H-porphyrin (THPP) oxidase-like nanozyme to engineer THPP@MIP interface with high affinities and differential selectivity for structurally related target analytes. THPP nanozyme displayed a high level of predefined binding affinity for etoposide (ETO), and served as a predesigned functional monomer to rationally tailor the selectivity of THPP@MIP surface in the presence of different guest molecules. THPP nanozyme in combination with conventional monomers was imprinted on a portable and disposable cellulose paper matrix under UV light to create a UV-cured imprinted interface for optical detection of ETO. The THPP@MIP enzyme mimicking interface, having ETO specific and selective target recognition pockets, catalyzed the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to generate visible blue oxidized TMB (oxTMB) without exogenous hydrogen peroxide (H2O2). The ETO binding on the THPP@MIP surface blocked the channels for TMB access to THPP cavities. The THPP@MIP sensor permitted to detect ETO in the linear range of 0.005-10 μg mL-1, with a limit of detection (LoD) of 0.002 μg mL-1, and showed a remarkable specificity and selectivity against other drug molecules. Furthermore, the THPP@MIP sensor successfully differentiated the serum samples of lung cancer patients and healthy volunteers. The obtained results were validated with standard High performance liquid chromatography-mass spectrometry (HPLC/MS) analysis of the serum samples. Additionally, ETO injection/infusion solutions and ETO-free serum samples were used to perform the matrix effect and recovery studies. This work demonstrates that molecular imprinting with predesigned, enzyme mimicking, high-affinity functional monomer can serve as a highly selective and specific universal interface for broad spectrum sensing applications in various analytical domains.

Organosilicon-Based Carbon Dots and Their Versatile Applications

Carbon dots (CDs) are a newly discovered type of fluorescent material that has gained significant attention due to their exceptional optical properties, biocompatibility, and other remarkable characteristics. However, single CDs have some drawbacks such as self-quenching, low quantum yield (QY), and poor stability. To address these issues, researchers have turned to organosilicon, which is known for its green, economical, and abundant properties. Organosilicon is widely used in various fields including optics, electronics, and biology. By utilizing organosilicon as a synthetic precursor, the biocompatibility, QY, and resistance to self-quenching of CDs can be improved. Meanwhile, the combination of organosilicon with CDs enables the functionalization of CDs, which significantly expands their original application scenarios. This paper comprehensively analyzes organosilicon in two main categories: precursors for CD synthesis and matrix materials for compounding with CDs. The role of organosilicon in these categories is thoroughly reviewed. In addition, the paper presents various applications of organosilicon compounded CDs, including detection and sensing, anti-counterfeiting, optoelectronic applications, and biological applications. Finally, the paper briefly discusses current development challenges and future directions in the field.

Advances in Non-Electrochemical Sensing of Human Sweat Biomarkers: From Sweat Sampling to Signal Reading

Sweat, commonly referred to as the ultrafiltrate of blood plasma, is an essential physiological fluid in the human body. It contains a wide range of metabolites, electrolytes, and other biologically significant markers that are closely linked to human health. Compared to other bodily fluids, such as blood, sweat offers distinct advantages in terms of ease of collection and non-invasive detection. In recent years, considerable attention has been focused on wearable sweat sensors due to their potential for continuous monitoring of biomarkers. Electrochemical methods have been extensively used for in situ sweat biomarker analysis, as thoroughly reviewed by various researchers. This comprehensive review aims to provide an overview of recent advances in non-electrochemical methods for analyzing sweat, including colorimetric methods, fluorescence techniques, surface-enhanced Raman spectroscopy, and more. The review covers multiple aspects of non-electrochemical sweat analysis, encompassing sweat sampling methodologies, detection techniques, signal processing, and diverse applications. Furthermore, it highlights the current bottlenecks and challenges faced by non-electrochemical sensors, such as limitations and interference issues. Finally, the review concludes by offering insights into the prospects for non-electrochemical sensing technologies. By providing a valuable reference and inspiring researchers engaged in the field of sweat sensor development, this paper aspires to foster the creation of innovative and practical advancements in this domain.

A magnetic molecular imprinting-based fluorescence probe for sensitive and selective detection of 2,4-D herbicide

A new magnetic molecular imprinting-based turn-on fluorescence probe (Fe3 O4 NPs@SiO2 @NBD@MIPs) has been synthesized via a facile sol-gel polymerization for the detection of 2,4-dichlorophenoxyacetic acid (2,4-D). Based on the photoinduced electron transfer (PET) of nitrobenzoxadiazole (NBD), 2,4-D can be recognized by enhancement of NBD fluorescence. With the presence of Fe3 O4 in the core of the probe, this sensor can also be reused many times using magnetic aggregation methods. After the addition of various concentrations of 2,4-D, the fluorescence peak at 530 nm (excitation of 468 nm) increased linearly ranging from 0.1 to 3 μM with a detection limit of 0.023 μM. This sensing system is believed to be available for detecting 2,4-D in real samples, with high recovery rates ranging from 94% to 108% for three spike levels of 2,4-D with precisions below 5%.

Research progress of sensors based on molecularly imprinted polymers in analytical and biomedical analysis

Molecularly imprinted polymers (MIPs) have had tremendous impact on biomimetic recognition due to their precise specificity and high affinity comparable to that of antibodies, which has shown the great advantages of easy preparation, good stability and low cost. The combination of MIPs with other analytical technologies can not only achieve rapid extraction and sensitive detection of target compounds, improving the level of analysis, but also achieve precise targeted delivery, in-vivo imaging and other applications. Among them, the recognition mechanism plays a vital role in chemical and biological sensing, while the improvement of the recognition element, such as the addition of new nanomaterials, can greatly improve the analytical performance of the sensor, especially in terms of selectivity. Currently, due to the need for rapid diagnosis and improved sensing properties (such as selectivity, stability, and cost-effectiveness), researchers are investigating new recognition elements and their combinations to improve the recognition capabilities of chemical sensing and bio-sensing. Therefore, this review mainly discusses the design strategies of optical sensors, electrochemical sensors and photoelectric sensors with molecular imprinting technology and their applications in environmental systems, food fields, drug detection and biology including bacteria and viruses.

Carbon Dots-Types, Obtaining and Application in Biotechnology and Food Technology

Materials with a "nano" structure are increasingly used in medicine and biotechnology as drug delivery systems, bioimaging agents or biosensors in the monitoring of toxic substances, heavy metals and environmental variations. Furthermore, in the food industry, they have found applications as detectors of food adulteration, microbial contamination and even in packaging for monitoring product freshness. Carbon dots (CDs) as materials with broad as well as unprecedented possibilities could revolutionize the economy, if only their synthesis was based on low-cost natural sources. So far, a number of studies point to the positive possibilities of obtaining CDs from natural sources. This review describes the types of carbon dots and the most important methods of obtaining them. It also focuses on presenting the potential application of carbon dots in biotechnology and food technology.

Zero-Dimensional Carbon Nanomaterials for Fluorescent Sensing and Imaging

Advances in nanotechnology and nanomaterials have attracted considerable interest and play key roles in scientific innovations in diverse fields. In particular, increased attention has been focused on carbon-based nanomaterials exhibiting diverse extended structures and unique properties. Among these materials, zero-dimensional structures, including fullerenes, carbon nano-onions, carbon nanodiamonds, and carbon dots, possess excellent bioaffinities and superior fluorescence properties that make these structures suitable for application to environmental and biological sensing, imaging, and therapeutics. This review provides a systematic overview of the classification and structural properties, design principles and preparation methods, and optical properties and sensing applications of zero-dimensional carbon nanomaterials. Recent interesting breakthroughs in the sensitive and selective sensing and imaging of heavy metal pollutants, hazardous substances, and bioactive molecules as well as applications in information encryption, super-resolution and photoacoustic imaging, and phototherapy and nanomedicine delivery are the main focus of this review. Finally, future challenges and prospects of these materials are highlighted and envisaged. This review presents a comprehensive basis and directions for designing, developing, and applying fascinating fluorescent sensors fabricated based on zero-dimensional carbon nanomaterials for specific requirements in numerous research fields.

Recent Developments in the Detection of Organic Contaminants Using Molecularly Imprinted Polymers Combined with Various Analytical Techniques

Molecularly imprinted polymers (MIPs) encompass a diverse array of polymeric matrices that exhibit the unique capacity to selectively identify a designated template molecule through specific chemical moieties. Thanks to their pivotal attributes, including exceptional selectivity, extended shelf stability, and other distinct characteristics, this class of compounds has garnered interest in the development of highly responsive sensor systems. As a result, the incorporation of MIPs in crafting distinctive sensors and analytical procedures tailored for specific analytes across various domains has increasingly become a common practice within contemporary analytical chemistry. Furthermore, the range of polymers amenable to MIP formulation significantly influences the potential utilization of both conventional and innovative analytical methodologies. This versatility expands the array of possibilities in which MIP-based sensing can be employed in recognition systems. The following review summarizes the notable progress achieved within the preceding seven-year period in employing MIP-based sensing techniques for analyte determination.

Ultrasensitive Fluorescence Platform Based on AgNPs In Situ-Incorporated Zr-MOFs for the Detection of Organophosphorus Pesticides

Organophosphorus pesticides (OPPs) are extensively used in agricultural production, and the contamination caused by their residues has raised significant concerns regarding potential threats to human health. Herein, a novel fluorescence nanoprobe based on an enzyme-mediated silver nanoparticle-modified metal organic framework (AgNPs@PCN-224) was successfully prepared for the rapid detection of OPPs. Initially, AgNPs@PCN-224 were synthesized by reducing silver nitrate (AgNO3) using sodium borohydride (NaBH4) embedded into luminescent PCN-224. This triggered the inner filter effect, leading to fluorescence quenching. Meanwhile, under the catalysis of acetylcholinesterase (AChE) and choline oxidase (CHO), acetylcholine (ATCh) was decomposed to hydrogen peroxide (H2O2), which could destroy AgNPs to form Ag+ released from PCN-224 for fluorescence recovery. Instead, fenitrothion, an OPP, inhibited AChE activity, allowing the quenched fluorescence to be reactivated. Under the current optimum conditions, the fluorescence intensity had a good correlation (Y = -728.5370X + 2178.4248, R2 = 0.9869) over a dynamic range of fenitrothion concentrations from 0.1 to 500 ng/mL, with an LOD of 0.037 ng/mL. In addition, the anti-interference ability and robustness of the proposed sensor was verified for the monitoring of fenitrothion in tea with recoveries of 87.67-103.72% and the relative standard deviations (RSD) < 5.43%, indicating that the system has excellent prospects for OPP determination in practical applications. Furthermore, this work provides a universal platform for screening other enzyme inhibitors to detect OPPs.

A Review of Sensing Applications of Molecularly Imprinted Fluorescent Carbon Dots for Food and Biological Sample Analysis

Molecularly imprinted fluorescent carbon dots (MI-FCDs) find numerous applications in analytical chemistry due to their outstanding photoluminescent properties and having specific pockets for the recognition of target molecules. Despite significant advances, practical applications of MI-FCDs-based fluorescent sensors are still in their initial stages. Therefore, the topical developments in the synthesis, working, and application of MI-FCDs for sensing various target species (e.g., pharmaceuticals, biomolecules, pesticides, food additives, and miscellaneous species) in food and biological media have been highlighted. Moreover, a careful evaluation has been made to select the best methods based on their performance in terms of analytical parameters. To expand the horizons of this field, important challenges and future directions for developing MI-FCDs for practical use are also presented. This review will highlight important aspects of MI-FCDs-based fluorescent sensors for their applicability in food science, material science, environmental science, nanoscience, and biotechnology.

Prospects of Microfluidic Technology in Nucleic Acid Detection Approaches

Conventional diagnostic techniques are based on the utilization of analyte sampling, sensing and signaling on separate platforms for detection purposes, which must be integrated to a single step procedure in point of care (POC) testing devices. Due to the expeditious nature of microfluidic platforms, the trend has been shifted toward the implementation of these systems for the detection of analytes in biochemical, clinical and food technology. Microfluidic systems molded with substances such as polymers or glass offer the specific and sensitive detection of infectious and noninfectious diseases by providing innumerable benefits, including less cost, good biological affinity, strong capillary action and simple process of fabrication. In the case of nanosensors for nucleic acid detection, some challenges need to be addressed, such as cellular lysis, isolation and amplification of nucleic acid before its detection. To avoid the utilization of laborious steps for executing these processes, advances have been deployed in this perspective for on-chip sample preparation, amplification and detection by the introduction of an emerging field of modular microfluidics that has multiple advantages over integrated microfluidics. This review emphasizes the significance of microfluidic technology for the nucleic acid detection of infectious and non-infectious diseases. The implementation of isothermal amplification in conjunction with the lateral flow assay greatly increases the binding efficiency of nanoparticles and biomolecules and improves the limit of detection and sensitivity. Most importantly, the deployment of paper-based material made of cellulose reduces the overall cost. Microfluidic technology in nucleic acid testing has been discussed by explicating its applications in different fields. Next-generation diagnostic methods can be improved by using CRISPR/Cas technology in microfluidic systems. This review concludes with the comparison and future prospects of various microfluidic systems, detection methods and plasma separation techniques used in microfluidic devices.

Preparation and Application Progress of Imprinted Polymers

Due to the specific recognition performance, imprinted polymers have been widely investigated and applied in the field of separation and detection. Based on the introduction of the imprinting principles, the classification of imprinted polymers (bulk imprinting, surface imprinting, and epitope imprinting) are summarized according to their structure first. Secondly, the preparation methods of imprinted polymers are summarized in detail, including traditional thermal polymerization, novel radiation polymerization, and green polymerization. Then, the practical applications of imprinted polymers for the selective recognition of different substrates, such as metal ions, organic molecules, and biological macromolecules, are systematically summarized. Finally, the existing problems in its preparation and application are summarized, and its prospects have been prospected.

Background-free and signal-amplified upconversion fluorescent biosensing platform for sensitive detection of CYFRA21-1

Accurate and ultrasensitive detection of cytokeratin 19 fragment (CYFRA21-1) is of vital importance for screening and diagnosis of potential lung cancer patient. In this paper, surface-modified upconversion nanomaterials (UCNPs) capable of aggregation by atom transfer radical polymerization (ATRP) were used as luminescent materials for the first time to achieve signal-stable, low-biological background, and sensitive detection of CYFRA21-1. Upconversion nanomaterials (UCNPs) feature extremely low biological background signals and narrow emission peaks, making them ideal sensor luminescent materials. The combination of UCNPs and ATRP not only improves sensitivity, but also reduces biological background interference for detecting CYFRA21-1. The target CYFRA21-1 was captured by specific binding of the antigen and the antibody. Subsequently, the end of the sandwich structure with the initiator reacts with monomers modified on UCNPs. Then, massive UCNPs are aggregated by ATRP that amplify the detection signal exponentially. Under optimal conditions, a linear calibration plot of the logarithm of CYFRA21-1 concentration versus the upconversion fluorescence intensity was obtained in the range of 1 pg/mL to 100 μg/mL with a detection limit of 38.7 fg/mL. The proposed upconversion fluorescent platform can distinguish the analogues of the target with excellent selectivity. Besides, the precision and accuracy of the developed upconversion fluorescent platform were verified by clinical methods. As an enhanced upconversion fluorescent platform of CYFRA21-1, it is expected to be useful in screening potential patients with NSCLC and provides a promising solution for the high-performance detection of other tumor markers.

Carbon nanomaterial-based molecularly imprinted polymer sensors for detection of hazardous substances in food: recent progress and future trends

The presence of various harmful substances in food is significantly risky to human health. Therefore, simple, rapid, and selective food hazard analysis tools have become a focus of sensing research. At present, molecularly imprinted polymers (MIPs) have attracted more and more attention because of their easy preparation and high selectivity. Due to their simple preparation, low cost, large specific surface area, and high conductivity, carbon nanomaterial can be used as sensing substrate carriers. Therefore, the combination of carbon nanomaterial with MIPs has attracted great attention. This paper summarizes the development, composition, and preparation methods of MIPs, as well as the latest research progress in carbon nanomaterials for the detection of various food hazards using sensors. In addition, the practical applications of carbon nanomaterial-based MIP sensors, their current challenges and future trends, and the ongoing efforts devoted to developing new and efficient carbon nanomaterial-based MIP sensing platforms are also introduced.

A color-change fluorescence sensor for oleanolic acid based on chiral camphanic decorated bis-cyanostilbene

Although various fluorescent sensors for biomolecules had been extensively reported, the effective fluorescent sensor was seldom reported for detecting oleanolic acid up to now. This work reports the first color-change fluorescence sensor for oleanolic acid based on a bridging bis-cyanostilbene derivative with chiral camphanic groups (C-BCS). C-BCS possessed the chartreuse fluorescence in aqueous media, which transferred to strong blue fluorescence in the presence of oleanolic acid. This sensing ability of C-BCS for oleanolic acid exhibited the high selectivity among all kinds of biomolecules and ions. The good linearity between the fluorescence intensity and concentration of oleanolic acid was acquired in the range of 0.2 × 10^-6 to 8.0 × 10^-6 M with the detecting limitation of 0.0582 μM. The 1:1 binding process was clarified as oleanolic acid located in the opening cavity composed of two bridging cyanostilbene units and two chiral camphanic groups based on multiple hydrogen bonds and hydrophobic interaction. The detecting ability of C-BCS was applied on sensing oleanolic acid in thin-layer chromatography analysis, imprinting experiment, tap water, and tea samples, suggesting the effective on-site sensing abilities of C-BCS for oleanolic acid in real samples and daily life.

Smart green CQD@SiO2 hybrid coated optical fiber manifesting dual versatile absorptive and MIP features towards epinephrine detection

For the first time, in this study, a novel optical fiber biosensor is proposed and developed via coating only one smart functional layer of silica-supported carbon dots realizing the concepts of both lossy mode resonance (LMR) and molecularly imprinted polymer (MIP) for epinephrine detection. The carbon quantum dots (CQDs) are prepared using a green synthesis method and then treated with a molecularly imprinted polymer (MIP) strategy. Under ultrasonic irradiation, a SiO2 shell was stabilized on the surface of the CQDs to graft and to provide the LMR/MIP functional layer onto the curved optical fiber surface. Accurate structural and morphological characterization confirmed the carbon quantum dot agents and also the SiO2 supporting shells on the optical fiber, while spectroscopic analysis confirms the formation of the imprinted polymer and desirable absorbance characteristics. The experimental and numerical sensing studies revealed that the proposed sensing probe allows the rapid adsorption/desorption of epinephrine to the sensing films and highly permeable coating for studying the influence of effective parameters. Under the optimal experimental conditions, the sensitivity of the proposed LMR-based optical fiber sensor is reported to be 0.37 nm μM-1 with a correlation coefficient of 0.99. So, sensitive detection of epinephrine at a low concentration can be guaranteed with a 0.72 mM LOD.

Sialyl-Tn Antigen-Imprinted Dual Fluorescent Core-Shell Nanoparticles for Ratiometric Sialyl-Tn Antigen Detection and Dual-Color Labeling of Cancer Cells

Sialyl-Tn (STn or sialyl-Thomsen-nouveau) is a carbohydrate antigen expressed by more than 80% of human carcinomas. We here report a strategy for ratiometric STn detection and dual-color cancer cell labeling, particularly, by molecularly imprinted polymers (MIPs). Imprinting was based on spectroscopic studies of a urea-containing green-fluorescent monomer 1 and STn-Thr-Na (sodium salt of Neu5Acα2-6GalNAcα-O-Thr). A few-nanometer-thin green-fluorescent polymer shell, in which STn-Thr-Na was imprinted with 1, other comonomers, and a cross-linker, was synthesized from the surface of red-emissive carbon nanodot (R-CND)-doped silica nanoparticles, resulting in dual fluorescent STn-MIPs. Dual-color labeling of cancer cells was achieved since both red and green emissions were detected in two separate channels of the microscope and an improved accuracy was obtained in comparison with single-signal MIPs. The flow cytometric cell analysis showed that the binding of STn-MIPs was significantly higher (p < 0.001) than that of non-imprinted polymer (NIP) control particles within the same cell line, allowing to distinguish populations. Based on the modularity of the luminescent core-fluorescent MIP shell architecture, the concept can be transferred in a straightforward manner to other target analytes.

Modification of Cotton Fabric with Molecularly Imprinted Polymer-Coated Carbon Dots as a Sensor for 17 α-methyltestosterone

Molecularly imprinted polymers@ethylenediamine-modified carbon dots grafted on cotton fabrics (MIPs@EDA-CDs/CF) and smartphone-based fluorescence image analysis were proposed and used for the first time for the detection of 17 α-methyltestosterone (MT). The EDA-CDs were synthesized and grafted on cotton fabric before coating with the MIPs. The MIPs were synthesized using the MT as a template molecule, methacrylic acid (MAA) as a functional monomer, ethylene glycol dimethacrylate (EGDMA) as a cross-linker, and azobisisobutyronitrile (AIBN) as an initiator. The MIPs@EDA-CDs/CF were characterized using FTIR, SEM-EDS, and RGB fluorescence imaging. The fluorescence images were also taken using a smartphone and the ImageJ program was used for RGB measurement. The Δ red intensity was linearly proportional to MT concentration in the range of 100 to 1000 μg/L (R2 = 0.999) with a detection limit of 44.4 μg/L and quantification limit of 134 μg/L. The MIPs@EDA-CDs/CF could be stored at 4 °C for a few weeks and could be reused twice. The proposed method could apply for the specific determination of MT in water and sediment samples along with satisfactory recoveries of 96-104% and an acceptable relative standard deviation of 1-6% at the ppb level.

Ultrasensitive and highly selective "turn-on" fluorescent sensor for the detection and measurement of melatonin in juice samples

Melatonin (MLT), a hormone related to the regulation of brain functions, is directly related to sleep quality and is considered to be a possible adjuvant therapy for patients needing hospitalization for coronavirus disease 2019 pneumonia, and accurate measurement of MLT is crucial. Herein, a new, highly sensitive, and easy operation fluorescent probe was provided based on Zr metal-organic framework encapsulation into the molecularly imprinted polymer (MOF@MIP). By combining unique properties of MIP and fluorescent MOF, selectivity and operation of the applied method were significantly improved. Different characterization methods, such as XRD, FT-IR, and FE-SEM, were used to confirm the synthesis reliability. MOF@MIP was successfully used for the precise identification and ultrasensitive detection for trace amounts of MLT. The detection mechanism for the analytical system is based on the ''turn-on'' fluorescence (FL) signal in 404 nm. The findings proved that it is possible to detect trace amounts of MLT in real samples including grape, cherry, and sour cherry juice. The linear range and the limit of detection (LOD) for trace amounts of MLT were obtained as 1-100 ng/mL and 0.18 ng/mL, respectively.

Fluorescent-based nanosensors for selective detection of a wide range of biological macromolecules: A comprehensive review

Thanks to their unique attributes, such as good sensitivity, selectivity, high surface-to-volume ratio, and versatile optical and electronic properties, fluorescent-based bioprobes have been used to create highly sensitive nanobiosensors to detect various biological and chemical agents. These sensors are superior to other analytical instrumentation techniques like gas chromatography, high-performance liquid chromatography, and capillary electrophoresis for being biodegradable, eco-friendly, and more economical, operational, and cost-effective. Moreover, several reports have also highlighted their application in the early detection of biomarkers associated with drug-induced organ damage such as liver, kidney, or lungs. In the present work, we comprehensively overviewed the electrochemical sensors that employ nanomaterials (nanoparticles/colloids or quantum dots, carbon dots, or nanoscaled metal-organic frameworks, etc.) to detect a variety of biological macromolecules based on fluorescent emission spectra. In addition, the most important mechanisms and methods to sense amino acids, protein, peptides, enzymes, carbohydrates, neurotransmitters, nucleic acids, vitamins, ions, metals, and electrolytes, blood gases, drugs (i.e., anti-inflammatory agents and antibiotics), toxins, alkaloids, antioxidants, cancer biomarkers, urinary metabolites (i.e., urea, uric acid, and creatinine), and pathogenic microorganisms were outlined and compared in terms of their selectivity and sensitivity. Altogether, the small dimensions and capability of these nanosensors for sensitive, label-free, real-time sensing of chemical, biological, and pharmaceutical agents could be used in array-based screening and in-vitro or in-vivo diagnostics. Although fluorescent nanoprobes are widely applied in determining biological macromolecules, unfortunately, they present many challenges and limitations. Efforts must be made to minimize such limitations in utilizing such nanobiosensors with an emphasis on their commercial developments. We believe that the current review can foster the wider incorporation of nanomedicine and will be of particular interest to researchers working on fluorescence technology, material chemistry, coordination polymers, and related research areas.

Use of molecular imprinted polymers as sensitive/selective luminescent sensing probes for pesticides/herbicides in water and food samples

As non-biological molecules, molecular imprinted polymers (MIPs) can be made as antibody mimics for the development of luminescence sensors for various targets. The combination of MIPs with nanomaterials is further recognized as a useful option to improve the sensitivity of luminescence sensors. In this work, the recent progresses made in the fabrication of fluorescence, phosphorescence, chemiluminescence, and electrochemiluminescence sensors based on such combination have been reviewed with emphasis on the detection of pesticides/herbicides. Accordingly, the materials that are most feasible for the detection of such targets are recommended based on the MIP technologies.

Tunable multiplexed fluorescence biosensing platform for simultaneous and selective detection of paraquat and carbendazim pesticides

The monitoring of multiple pesticides commonly used in food is a prerequisite for public health safety. Herein, a multiplexed biosensor based on fluorescence resonance energy transfer (FRET) from multicolor upconversion nanoparticles (UCNPs)to single black phosphorus nanosheets (BPNSs) was successfully developed for simultaneous and selective detection of paraquat and carbendazim pesticides. Due to the strong π-π stacking interactions, aptamers functionalized UCNPs may adsorb on the BPNSs surface, allowing strong upconversion fluorescence quenching. In the presence of paraquat and carbendazim, the aptamers preferentially integrated with their corresponding targets and altered the aptamer's conformation, restoring the fluorescence. An excellent linear correlation was observed from 1.0 to 1.0 × 10⁵ ng/mL, with a limit of detection of 0.18 ng/mL for paraquat and 0.45 ng/mL for carbendazim. The developed aptasensor was further validated by commercial enzyme-linked immunoassays without significant differences in practical detection. Additionally, this work offers new insights into monitoring multiple targets simultaneously.

Application progress of magnetic molecularly imprinted polymers chemical sensors in the detection of biomarkers

Specific recognition and highly sensitive detection of biomarkers play an essential role in identification, early diagnosis and prevention of many diseases. Magnetic molecularly imprinted polymers (MMIPs) have been widely used to capture biomimetic receptors for targets in various complex matrices due to their superior recognition ability, structural stability, and rapid separation characteristics, which overcome the existing deficiencies of traditional recognition elements such as antibodies, aptamers. The integration of MMIPs as recognition elements with chemical sensors opens new opportunities for the development of advanced analytical devices with improved selectivity and sensitivity, shorter analysis time, and lower cost. Recently, MMIPs-chemical sensors (MMIPs-CS) have made significant progress in detection, but many challenges and development spaces remain. Therefore, this review focuses on the research progress of the sensor based on biomarker detection and introduces the surface modification of the magnetic support material used to prepare high selective MMIPs, as well as the selective extraction of target biomarkers by MMIPs from the complex biological sample matrix. Based on the understanding of optical sensors and electrochemical sensors, the applications of MMIPs-optical sensors (MMIPs-OS) and MMIPs-electrochemical sensors (MMIPs-ECS) for biomarker detection were reviewed and discussed in detail. Moreover, it provides an overview of the challenges in this research area and the potential strategies for the rational design of high-performance MMIPs-CS, accelerating the development of multifunctional MMIPs-CS.

Intrinsic Blue Fluorescence of 2.0G PAMAM-DCM Polymer Dots and Its Applications for Fe3+ Sensing

A typical and environment-friendly fluorescent polyamine-amine (PAMAM) features good compatibility and unique surface modification, while it is restricted by a low fluorescence property performance and an unclear fluorescence mechanism. In this work, we prepared blue fluorescent PAMAM polymer dots (PDs) via a simple hydrothermal method based on dichloromethane (DCM) and 2.0G PAMAM. The quantum yield achieved was 32.1%, which was 25 times stronger than that of 2.0G PAMAM due to the lone-pair electron leap of the amine groups, the aggregation of carbonyl groups, as well as the crosslinking induced by DCM inside the PAMAM. In addition, the fluorescent 2.0G PAMAM-DCM PDs show a great Fe3+ sensing property with the detection limit of 56.6 nM, which is much lower than the safety limits (5.36 μM) in drinking water, indicating its great potential for Fe3+ detection in aqueous media.