Crosslinking biopolymers for biomedical applications

Advanced microbiome therapeutics for oral delivery of peptides and proteins: Advances, challenges, and opportunities

Peptide and protein medicines have changed the therapeutic landscape for many diseases, yet oral delivery remains a significant challenge due to enzymatic degradation, instability, and poor permeability in the gastrointestinal tract. Advanced Microbiome Therapeutics (AMTs) could overcome some of these barriers by producing and releasing therapeutic peptides directly in the gastrointestinal tract. AMTs can localize peptide production at the site of absorption, providing either sustained or controlled release while potentially reducing side effects associated with systemic administration. Here, this review assesses the status of AMTs for oral peptide delivery and discusses the potential integration of enzyme inhibitors, permeation enhancers, and mucoadhesive to improve oral bioavailability further. Combining these approaches could pave the way for more widespread oral delivery strategies for peptide and protein medicines.

Multifunctional applications of silk fibroin in biomedical engineering: A comprehensive review on innovations and impact

Silk fibroin (SF) is a biomaterial naturally produced by certain insects (notably silkworms), animals such as spiders, or through recombinant methods in genetically modified organisms. Its exceptional mechanical properties, biocompatibility, degradability, and bioactivity have inspired extensive research. In biomedicine, SF has been utilized in various forms, including gels, membranes, microspheres, and more. It also demonstrates versatility for applications across medical devices, regenerative medicine, tissue engineering, and related fields. This review explores the current research status, advantages, limitations, and potential application pathways of SF in biomedical engineering. The objective is to stimulate innovative ideas and perspectives for research and applications involving silk.

Homobifunctional Photocaged 2-Butene-1,4-dials (bis-PBDAs) as Amino-Reactive Photo-Crosslinkers for Biomaterial Fabrication and Cell Fixation

Crosslinking amine-rich biomolecules with aldehydes, such as paraformaldehyde (PFA) and glutaraldehyde (GA), is a widely used method for biomaterial fabrication and cell fixation. In this study, we introduce homobifunctional photocaged 2-butene-1,4-dials (bis-PBDAs) as novel amine-reactive photo-crosslinkers. Compared to PFA and GA, bis-PBDAs are inherently less toxic. Upon photo-deprotection, bis-PBDAs efficiently react with the amino groups of biomolecules, such as carboxymethyl chitosan and histone H3, forming stable, well-defined crosslinks. Even at low concentrations (~100 μM), bis-PBDAs facilitate effective cell fixation without significantly altering cellular morphology or interfering with biochemical analyses, including protein/mRNA extraction and immunofluorescence imaging. Therefore, bis-PBDAs are promising reagents for crosslinking amine-rich biopolymers and hold great potential in biomaterial fabrication and the fixation of living cells and tissues.

Protein-based nanocarriers for paclitaxel (PTX) delivery in cancer treatment: A review

Paclitaxel (PTX) is recognized as one of the most potent chemotherapy agents and is widely used to treat various cancers, including ovarian, lung, breast, head, and neck cancer. Due to the limited solubility and high toxicity of PTX, its use in cancer treatment is challenging and limited. Hence, strategies have been devised to improve the solubility and bioavailability of paclitaxel. In recent years, biocompatible nanocarriers have garnered attention due to their desirable properties, including increased permeability, targeted delivery, extended circulatory half-life, and biological drug delivery for the delivery of chemotherapeutic drugs. Protein nanostructures have been widely studied for the delivery of paclitaxel due to their significant advantages, such as safety, low toxicity, availability, and relatively easy preparation. This review article reviews recent advances in the development of protein-based drug delivery systems for loading and releasing paclitaxel. These nanocarriers have great potential to improve paclitaxel's antitumor properties and efficacy. Therefore, in the future, the integration of the pharmaceutical industry and artificial intelligence techniques will provide more opportunities for research and development in the pharmaceutical field.

Chain entanglement enhanced strong and tough wool keratin/albumin fibers for bioabsorbable and immunocompatible surgical sutures

High-performance fibers derived from non-silk proteins have garnered significant interest in biomedical applications because of their high accessibility and biocompatibility. Nonetheless, considerable challenges persist in addressing their structural defects to fabricate fibers with an optimal balance of strength and toughness. Herein, an entanglement-reinforced strategy is proposed to reconstruct high-performance non-silk protein fibers. Regenerated keratin and bovine serum albumin (BSA) are unfolded by denaturant and complementarily composited, leveraging their intrinsic cysteine re-oxidation to generate a robust mechanical cross-linking network without the requirement of an external crosslinker. The resulting drawn keratin/BSA composite fiber (DKBF) exhibits balanced mechanical performances with a breaking strength of approximately 250 MPa and a toughness of around 70 MJ m-3, outperforming that of reported regenerated keratin fibers and comparable to many natural or artificial silk fibers. Additionally, DKBFs demonstrate redox-responsive mechanical behavior and hydration-induced reversible shape memory. The DKBFs show good suturing capability for wound repair in female animal models due to their excellent bioabsorbability and immunocompatibility. This work offers valuable insights into addressing the current challenges in manufacturing mechanically robust and tough non-silk protein fibers, bringing hope for the development of more sustainable and versatile materials.

Injectable in situ forming hydrogel based on carboxymethyl chitosan for sustained release of hyaluronic acid: A viscosupplement for biomedical applications

The reduction in hyaluronic acid concentration and viscosity in the synovial fluid of patients struggling with osteoarthritis increases the abrasion of articular cartilage. The aim of this study was to design a semi-IPN hydrogel based on genipin-crosslinked carboxymethyl chitosan (CMCh) and glycerol to achieve long-term release of hyaluronic acid. The results showed that hydrogel comprising CMCh (3 % wt.), HA (0.3 % wt.), and glycerol (1.25 % wt.), with high structural sustainability (over 45 % within 30 days of exposure to PBS/lysozyme medium), swelling ratio of 368.6 %, compression modulus of 8.4 kPa, elongation at break of 64.4 %, and cell viability of >90 % (in 48 h exposure), provides a long retention time and release of HA, which leads to gradual absorption, minimizes pain, and maintains joint mobility, as well as preventing multiple injections. The non-Newtonian behavior of the hydrogel (before crosslinking) along with the favorable gelation time help the viscosupplement to be easily injected and then maintain its position till the end of the crosslinking process within 18min. Considering all the data obtained, it is hypothesized that the optimum sample, namely CHG4Gly1.25, resulting in excellent injectability and moldability, can serve as a novel and promising substrate for biomaterial applications.

A Macrocycle-Assisted Platform Approach to Protein Cross-Linking Via Chemically Inactive Residues

Cross-linking proteins using cross-linkers that chemically target primary amine and/or carboxyl residues has been a technically mature and robust method in protein engineering. However, depletion of chemically active residues over cross-linking presents a significant challenge to the ability of the resulting bioassemblies to be further engineered and/or maintain specific biological functions. Here, we report a platform approach to cross-link natural proteins via the otherwise chemically inactive residues. This method exploits noncovalent and selective binding of molecularly engineered cucurbit[7]uril macrocycle to aromatic residues that endows the parent protein with additional unique handles for cross-linking. Various proteins are amenable to this approach, yielding bioassemblies with mechanical strength and thermal and enzymatic stability comparable to or exceeding counterparts prepared by some "gold-standard" chemical cross-linkers. This macrocycle-assisted platform approach offers a new paradigm for fabricating valuable bioassemblies that overcome the intrinsic limitations of existing methodologies.

Chitosan fabricated silver nitroprusside nanocomposites prepared for enhanced antibacterial and cytocompatibility applications through controlled release of metal ions and nitric oxide

Silver nitroprusside complex nanoparticles (AgN NPs) have garnered significant attention for their antimicrobial properties. However, challenges such as toxicity and limited biocompatibility often hinder their practical applications. Therefore, this study introduces a combined approach to fabricating AgN NPs with chitosan (CS), resulting in CS-AgN nanocomposites (CS-AgN NCs) with cytocompatibility. AgN NPs exhibited a distinct cubic morphology with a mean size of 52.88 ± 15.45 nm, while CS-AgN NCs showed a smaller, spherical, and elongated structure. The incorporation of CS led to significant changes in AgN NPs, including a reduction in the zeta potential from -46.63 ± 1.25 mV to -13.0 ± 2.12 mV and alterations in crystallinity. A key finding was that nitric oxide (NO) release was highly pH-dependent, which could offer targeted therapeutic potential. Both nano systems demonstrated potent antibacterial effects, with minimum inhibitory concentrations (MICs) as low as 6.25 μg/mL against E. coli, alongside strong biofilm inhibition (≥80 % at 12.5-25 μg/mL). The CS-AgN NCs also exhibited superior antioxidant activity compared to AgN NPs without compromising cell viability or causing hemolysis, and low toxicity to Artemia salina, making them promising candidates for biomedical applications. This work highlights the unique interplay between AgN NPs and CS, offering insights into their potential for next-generation antimicrobial therapies.

Structural Insights into Ratite Birds and Crocodile Eggshells for Advanced Biomaterials Design

Detailed analysis of particle size, morphology, elemental composition, crystalline structure, and thermal degradation behavior reveals significant differences between ratite and crocodile eggshells, showing their unique environmental adaptations and biological functions. Ratite eggshells, characterized by smaller particle sizes, present lower thermal degradation and are more suitable for applications requiring flexibility and resilience. In contrast, crocodilian eggshells have more extensive and denser particles, giving them a more uniform structure and therefore contributing to their higher thermal stability and mechanical strength. The variation in activation energy profiles between different parts of the eggshells indicates the complexity of their degradation processes. In this regard, ostrich eggshell presents more complicated, multistage thermal degradation patterns, and may be suitable for layered thermal stability applications. In contrast, the uniform degradation behavior of emu eggshells suggests its utility in systems where consistent thermal performance is essential. Similarly, the stable and predictable degradation profiles of river and swamp crocodile eggshells make them ideal candidates for environments requiring high durability and resistance to thermal cycling. This research highlights the natural design of eggshells and provides valuable guidance for the development of biomimetic materials. By mimicking the structural and thermal properties of these eggshells, it would be useful to create thermally stable and mechanical materials suitable for a wide range of industrial and biomedical applications.

Enhanced rare earth element recovery with cross-linked glutaraldehyde-lanthanide binding peptides in foam-based separations

HYPOTHESIS

Lanthanide Binding Tag (LBT) peptides that coordinate selectively with lanthanide ions can be used to replace the energy intensive processes used for the separation of rare earth elements (REEs). These surface-active biomolecules, once selectively complexed with the trivalent REE cations, can adsorb to air/aqueous interfaces of bubbles for foam-based REEs recovery. Glutaraldehyde, an organic compound that is a homobifunctional crosslinker for proteins and peptides, can be used to enhance the adsorption and interfacial stabilization of lanthanide-bound peptides films.

EXPERIMENTS

The stability of the interfacial cross-linked films was tested by measuring their dilational and shear surface rheological properties. Surface activity of the adsorbed species was analyzed using pendant drop tensiometry, while surface density and molecular arrangement were determined using x-ray reflectivity and x-ray fluorescence near total reflection.

FINDINGS

Glutaraldehyde cross-linked REE-peptide complexes enhance the adsorption of lanthanides to air-water interfaces, resulting in thicker interfacial structures. Subsequently, these thicker layers enhance the dilational and shear interfacial rheological properties. The interfacial film stabilization and REEs extraction promoted by the cross-linker presented in this work provides an approach to integrate glutaraldehyde as a substitute of common foam stabilizers such as polymers, surfactants, and particles to optimize the recovery of REEs when using biomolecules as extractants.

Empowering canonical biochemicals with cross-linked novelty: Recursions in applications of protein cross-links

Diversity in the biochemical workhorses of the cell-that is, proteins-is achieved by the innumerable permutations offered primarily by the 20 canonical L-amino acids prevalent in all biological systems. Yet, proteins are known to additionally undergo unusual modifications for specialized functions. Of the various post-translational modifications known to occur in proteins, the recently identified non-disulfide cross-links are unique, residue-specific covalent modifications that confer additional structural stability and unique functional characteristics to these biomolecules. We review an exclusive class of amino acid cross-links encompassing aromatic and sulfur-containing side chains, which not only confer superior biochemical characteristics to the protein but also possess additional spectroscopic features that can be exploited as novel chromophores. Studies of their in vivo reaction mechanism have facilitated their specialized in vitro applications in hydrogels and protein anchoring in monolayer chips. Furthering the discovery of unique canonical cross-links through new chemical, structural, and bioinformatics tools will catalyze the development of protein-specific hyperstable nanostructures, superfoods, and biotherapeutics.

Role of crosslinkers in advancing chitosan-based biocomposite scaffolds for bone tissue engineering: A comprehensive review

Bone tissue engineering (BTE) aims to repair and regenerate damaged bone tissue by combining cells, scaffolds, and signaling molecules. Various macromolecules, including natural polymers like chitosan (CS), collagen, hyaluronic acid, and alginate, as well as synthetic polymers such as polyethylene glycol and polylactic acid, are used in scaffold fabrication. Among these, CS holds significant potential in BTE due to its biocompatibility, biodegradability, and other features. The inherent mechanical weaknesses of CS-based scaffolds require the implementation of crosslinking strategies to improve their stability and overall performance. Physical crosslinkers like ultra-violet irradiation and freeze-thaw cycles are biocompatible but offer limited mechanical strength. Chemical crosslinkers like glutaraldehyde significantly improve mechanical strength, but they may induce cytotoxicity. We briefly outline here the critical role of physical and chemical crosslinkers in improving the physicochemical properties, mechanical strength, biocompatibility, and biological functions of CS-based scaffolds, including effective bone regeneration. The influence of crosslinking on the CS-based scaffolds' bioactivity, including the controlled release of bioactive molecules, is also discussed. A thorough understanding of crosslinker chemistry and application in CS-based scaffolds is essential for advancing bone regeneration therapies.

Recent opportunities and application of gellan gum based drug delivery system for intranasal route

OBJECTIVES

In the recent years, in-situ hydrogel based on gellan gum has been investigated for delivery of various drug molecules particularly to treat neurological disorders via intranasal route. The major objective of the present manuscript is to review the recent research studies exploring gellan gum as ionic triggered in-situ gel for intranasal administration to enhance absorption of drugs and to increase their therapeutic efficacy.

METHODS

This review include literature from 1982 to 2023 and were collected from various scientific electronic databases like Scopus, PubMed and Google Scholar to review source, chemistry, ionotropic gelation mechanism, and recent research studies for gellan gum based in-situ hydrogel for intransasl administration.Keywords such as gellan gum, in-situ hydrogel, intranasal administration and brain targeting were used to search literature. The present review included the research studies which explored gellan gum based in-situ gel for intranasal drug delivery.

RESULTS

The findings have shown enhanced biavailability of various drugs upon intranasal administration using gellan-gum based in-situ hydrogel.Moreover, the review indicated that intranasal administration of in-situ hydrogel facilitate to overcome blood brain barrier effectively. Hence, significantly higher drug concentration was found to be achieved in brain tissues upon intranasal administration than that of other routes like oral and intravenous.

CONCLUSION

The present work conducted a comprehensive review for gellan gum based in-situ hydrogel particularly for intransal administration to overcome BBB. The study concluded that gellan gum based in-situ hydrogel could be potential promising delivery system for intranasal administration to improve bioavailability and efficacy of drugs specifically to treat neurological disorders.

Two Novel Membranes Based on Collagen and Polyphenols for Enhanced Wound Healing

Two novel membranes based on collagen and two polyphenols, taxifolin pentaglutarate (TfG5) and a conjugate of taxifolin with glyoxylic acid (DfTf), were prepared. Fourier transform infrared spectroscopy examination confirmed the preservation of the triple helical structure of collagen. A scanning electron microscopy study showed that both materials had a porous structure. The incorporation of DfTf into the freeze-dried collagen matrix increased the aggregation of collagen fibers to a higher extent than the incorporation of TfG5, resulting in a more compact structure of the material containing DfTf. It was found that NIH/3T3 mouse fibroblasts were attached to, and relatively evenly spread out on, the surface of both newly obtained membranes. In addition, it was shown that the membranes enhanced skin wound healing in rats with a chemical burn induced by acetic acid. The treatment with the materials led to a faster reepithelization and granulation tissue formation compared with the use of other agents (collagen without polyphenols and buffer saline). It was also found that, in the wound tissue, the level of thiobarbituric acid reactive substances (TBARS) was significantly higher and the level of low-molecular-weight SH-containing compounds (RSH) was significantly lower than those in healthy skin, indicating a rise in oxidative stress at the site of injury. The treatment with collagen membranes containing polyphenols significantly decreased the TBARS level and increased the RSH level, suggesting the antioxidant/anti-inflammatory effect of the materials. The membrane containing TfG5 was more effective than other ones (the collagen membrane containing DfTf and collagen without polyphenols). On the whole, the data obtained indicate that collagen materials containing DfTf and TfG5 have potential as powerful therapeutic agents for the treatment of burn wounds.

Synthesis and Comprehensive Characterization of Amino Acid-Derived Vinyl Monomer Gels

In this study, we report an easy synthetic pathway to vinyl monomers derivatized with amino acids. Tyrosine-, phenylalanine-, tryptophan-, leucine-, and methionine-based monomers were synthesized, and their polymerization in the presence of cross-linking agents led to the formation of amino acid-based gels. The nature of cross-linker, the time of polymerization, and the type of initiation (photopolymerization or thermopolymerization) were investigated. The obtained gels were characterized using a combination of thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), rheology, scanning electron microscopy (SEM), and solid-state nuclear magnetic resonance (NMR) spectroscopy. These novel amino acid-based gels could find applications in various areas such as drug delivery, biosensing, and biotechnology.

Bioinspired injectable hydrogels for bone regeneration

The effective regeneration of bone/cartilage defects remains a significant clinical challenge, causing irreversible damage to millions annually.Conventional therapies such as autologous or artificial bone grafting often yield unsatisfactory outcomes, emphasizing the urgent need for innovative treatment methods. Biomaterial-based strategies, including hydrogels and active scaffolds, have shown potential in promoting bone/cartilage regeneration. Among them, injectable hydrogels have garnered substantial attention in recent years on account of their minimal invasiveness, shape adaptation, and controlled spatiotemporal release. This review systematically discusses the synthesis of injectable hydrogels, bioinspired approaches-covering microenvironment, structural, compositional, and bioactive component-inspired strategies-and their applications in various bone/cartilage disease models, highlighting bone/cartilage regeneration from an innovative perspective of bioinspired design. Taken together, bioinspired injectable hydrogels offer promising and feasible solutions for promoting bone/cartilage regeneration, ultimately laying the foundations for clinical applications. Furthermore, insights into further prospective directions for AI in injectable hydrogels screening and organoid construction are provided.

Tragacanth gum hydrogels with cellulose nanocrystals: A study on optimizing properties and printability

This study investigates a novel all-polysaccharide hydrogel composed of tragacanth gum (TG) and cellulose nanocrystals (CNCs), eliminating the need for toxic crosslinkers. Designed for potential tissue engineering applications, these hydrogels were fabricated using 3D printing and freeze-drying techniques to create scaffolds with interconnected macropores, facilitating nutrient transport. SEM images revealed that the hydrogels contained macropores with a diameter of 100-115 μm. Notably, increasing the CNC content within the TG matrix (30-50 %) resulted in a decrease in porosity from 83 % to 76 %, attributed to enhanced polymer-nanocrystal interactions that produced denser networks. Despite the reduced porosity, the hydrogels demonstrated high swelling ratios (890-1090 %) due to the high water binding capacity of the hydrogel. Mechanical testing showed that higher CNC concentrations significantly improved compressive strength (27.7-49.5 kPa) and toughness (362-707 kJ/m3), highlighting the enhanced mechanical properties of the hydrogels. Thermal analysis confirmed stability up to 400 °C and verified ionic crosslinking with CaCl₂. Additionally, hemolysis tests indicated minimal hemolytic activity, affirming the biocompatibility of the TG/CNC hydrogels. These findings highlight the potential of these hydrogels as advanced materials for 3D-printed scaffolds and injectable hydrogels, offering customizable porosity, superior mechanical strength, thermal stability, and biocompatibility.

Biobased hydrogel bioinks of pectin, nanocellulose and lysozyme nanofibrils for the bioprinting of A375 melanoma cell-laden 3D in vitro platforms

Melanoma is one of the most aggressive types of skin cancer, and the need for advanced platforms to study this disease and to develop new treatments is rising. 3D bioprinted tumor models are emerging as advanced tools to tackle these needs, with the design of adequate bioinks being a fundamental step to address this challenging process. Thus, this work explores the synergy between two biobased nanofibers, nanofibrillated cellulose (NFC) and lysozyme amyloid nanofibrils (LNFs), to create pectin nanocomposite hydrogel bioinks for the 3D bioprinting of A375 melanoma cell-laden living constructs. The incorporation of LNFs (5, 10 or 15 wt%) on a pectin-NFC suspension originates inks with enhanced rheological properties (shear viscosity and yield point) and proper shear-thinning behavior. The crosslinked hydrogels mimic the stiffness of melanoma tissues, being stable under physiological and cell-culture conditions, and non-cytotoxic towards A375 melanoma cells. P-NFC-LNFs (10 %) reveals good printability (Pr = 0.89) and printing accuracy (51 ± 2 %), and when loaded with A375 cells (3 × 106 cells mL-1) the bioink originates 3D-constructs with high cell viability (92 ± 1 %) after 14 days. The potential of the constructs as 3D in vitro platforms is corroborated by a drug-screening test with doxorubicin, where cells within the model displayed high sensitivity to the drug.

A Nontoxic and Biocompatible Method for Augmenting Mechanical Strength of Acellular Matrix by Silk Fibroin Impregnation

Biological scaffolds are plagued by poor biomechanical properties and untimely degradation. These limitations have yet to be addressed without compromising their biocompatibility. It is desirable to avoid inflammation and have degradation with concomitant host collagen deposition or even site-appropriate in situ regeneration for the successful outcome of an implanted biological scaffold. This work aims to achieve this by utilizing a biocompatible method to modify acellular scaffolds by impregnating alkaline-catalyzed citric acid (CA) cross-linking between the extracellular matrix proteins and silk fibroin (SF)/SF-gelatin (SFG) blends. Combinatorial detergent decellularization was employed to prepare a decellularized porcine liver scaffold (DPL). After proving the decellularization efficiency, the scaffold underwent modification by vacuum impregnation with CA containing SF (SF100DPL) and SFG blends (SFG5050DPL and SFG3070DPL) following pre-cross-linking, drying, and post-cross-linking. The subsequent strength augmentation was demonstrated by significant improvement in tensile strength from 2.4 ± 0.4 MPa (DPL) to, 3.8 ± 0.7 MPa (SF100DPL), 3.4 ± 0.7 MPa (SFG5050DPL), and 3.5 ± 0.2 MPa (SFG3070DPL); Young's modulus from 8.7 ± 1.8 MPa (DPL) to 20 ± 1.9 MPa (SF100DPL), 13.3 ± 2.6 MPa (SFG5050DPL), and 16 ± 1.2 MPa (SFG3070DPL); and suture retention strength from 0.9 ± 0.08 MPa (DPL) to 2.3 ± 0.2 MPa (SF100DPL), 2.8 ± 1.2 MPa (SFG5050DPL), and 2.6 ± 0.9 MPa (SFG3070DPL). The degradation resistance of the modified scaffolds was also markedly improved. Being cytocompatible, its ability to incite tolerable inflammatory and immune responses was confirmed by rat subcutaneous implantation for 14, 30, and 90 days, in terms of inflammatory cell infiltration, neoangiogenesis, and in vitro cytokine release to assess B-cell and T-cell activation. Such ECM composite scaffolds with appropriate strength and biocompatibility offer great promise in soft tissue repair applications such as skin grafting.

Preparation and characterization of amidated pectin-gelatin-oxidized tannic acid hydrogel films supplemented with in-situ reduced silver nanoparticles for wound-dressing applications

Wound dressings play a crucial role in protecting injured tissues and promoting the healing process. Traditional fabrication of antibacterial wound dressings can be complex and may involve toxic components. In this study, we developed an innovative hydrogel film (AP:GE@OTA/Ag) composed of amidated pectin (AP), gelatin (GE), oxidized tannic acid (OTA) at varying concentrations, and in-situ reduced silver nanoparticles (AgNPs). FTIR and XRD analyses confirmed that crosslinking occurs via interactions between OTA quinone groups and free amino groups in AP and GE. TEM imaging demonstrated the well-dispersed AgNPs with an average particle size of 58.64 nm, while the TG measurements indicated the enhancement of the thermal stability compared to AP:GE films. The AP:GE@OTA/Ag films exhibited superior fluid uptake ability (90.96 % at 2 h), water retention capacity (91.69 % at 2 h), and water vapor transmission rate (1903.29 g/m2/day), alongside improved tensile strength (38 MPa). Additionally, these films showed excellent cytocompatibility and sustained potent antimicrobial activity against S. aureus and E. coli with low AgNPs loadings of 1.02 ± 0.13 μg/cm2. NIT-1 mouse insulinoma cells demonstrated robust proliferation when cultured with the prepared dressings. These films significantly accelerated wound repair in a skin excision model, indicating their potential clinical applications for wound healing.

Cross-Linking Agents in Three-Component Materials Dedicated to Biomedical Applications: A Review

In biomaterials research, using one or two components to prepare materials is common. However, there is a growing interest in developing materials composed of three components, as these can offer enhanced physicochemical properties compared to those consisting of one or two components. The introduction of a third component can significantly improve the mechanical strength, biocompatibility, and functionality of the resulting materials. Cross-linking is often employed to further enhance these properties, with chemical cross-linking agents being the most widely used method. This article provides an overview of the chemical agents utilized in the cross-linking of three-component biomaterials. The literature review focused on cases where the material was composed of three components and a chemical substance was employed as the cross-linking agent. The most commonly used cross-linking agents identified in the literature include glyoxal, glutaraldehyde, dialdehyde starch, dialdehyde chitosan, and the EDC/NHS mixture. Additionally, the review briefly discusses materials cross-linked with the MES/EDC mixture, caffeic acid, tannic acid, and genipin. Through a critical analysis of current research, this work aims to guide the development of more effective and safer biopolymeric materials tailored for biomedical applications, highlighting potential areas for further investigation and optimization.

Development of Biocompatible Coatings with PVA/Gelatin Hydrogel Films on Vancomycin-Loaded Titania Nanotubes for Controllable Drug Release

This study investigates the utilization of poly(vinyl alcohol) (PVA)/gelatin hydrogel films cross-linked with glutaraldehyde as a novel material to coat the surface of vancomycin-loaded titania nanotubes (TNTs), with a focus on enhancing biocompatibility and achieving controlled vancomycin release. Hydrogel films have emerged as promising candidates in tissue engineering and drug-delivery systems due to their versatile properties. The development of these hydrogel films involved varying the proportions of PVA, gelatin, and glutaraldehyde to achieve the desired properties, including the gel fraction, swelling behavior, biocompatibility, and biodegradation. Among the formulations tested, the hydrogel with a PVA-to-gelatin ratio of 25:75 and 0.2% glutaraldehyde was selected to coat vancomycin-loaded TNTs. The coated TNTs demonstrated slower release of vancomycin compared with the uncoated TNTs. In addition, the coated TNTs demonstrated the ability to promote osteogenesis, as evidenced by increased alkaline phosphatase activity and calcium accumulation. The vancomycin-loaded TNTs coated with hydrogel film demonstrated effectiveness against both E. coli and S. aureus. These findings highlight the potential benefits and therapeutic applications of using hydrogel films to coat implant materials, offering efficient drug delivery and controlled release. This study contributes valuable insights into the development of alternative materials for medical applications, thereby advancing the field of biomaterials and drug delivery systems.

Photo-crosslinked chitosan-gelatin xerogel-like coating onto "cold" plasma functionalized poly(lactic acid) film as cell culture support

This paper reports on biofunctionalisation of a poly(lactic acid) (PLA) film by surface activation through cold plasma treatment followed by coating with a chitosan-gelatin xerogel. The UV cross-linking of the xerogel precursor was simultaneously performed with the fixation onto the PLA support. This has a strong effect on surface properties, in terms of wettability, surface free energy, morphology and micromechanical features. The hydrophilic - hydrophobic character of the surface, determined by contact angle measurements, was tuned along the process, passing from moderate hydrophobic PLA to enhanced hydrophilic plasma activated surface, which favors coating adhesion, then to moderate hydrophobic chitosan-gelatin coating. The coating has a Lewis amphoteric surface, with a porous xerogel-like morphology, as revealed by scanning electron microscopy images. By riboflavin mediated UV cross-linking the chitosan-gelatin coating becomes high adhesive and with a more pronounced plasticity, as shown by AFM force-distance spectroscopy. Thus prepared surface-coated PLA supports were successfully tested for growth of dermal fibroblasts, which are known for their induction potential of chondrogenic cells, which is very important in cartilage tissue engineering.

Controlled Stiffness of Direct-Write, Near-Field Electrospun Gelatin Fibers Generates Differences in Tenocyte Morphology and Gene Expression

Tendinopathy is a leading cause of mobility issues. Currently, the cell-matrix interactions involved in the development of tendinopathy are not fully understood. In vitro tendon models provide a unique tool for addressing this knowledge gap as they permit fine control over biochemical, micromechanical, and structural aspects of the local environment to explore cell-matrix interactions. In this study, direct-write, near-field electrospinning of gelatin solution was implemented to fabricate micron-scale fibrous scaffolds that mimic native collagen fiber size and orientation. The stiffness of these fibrous scaffolds was found to be controllable between 1 MPa and 8 MPa using different crosslinking methods (EDC, DHT, DHT+EDC) or through altering the duration of crosslinking with EDC (1 h to 24 h). EDC crosslinking provided the greatest fiber stability, surviving up to 3 weeks in vitro. Differences in stiffness resulted in phenotypic changes for equine tenocytes with low stiffness fibers (∼1 MPa) promoting an elongated nuclear aspect ratio while those on high stiffness fibers (∼8 MPa) were rounded. High stiffness fibers resulted in the upregulation of matrix metalloproteinase (MMPs) and proteoglycans (possible indicators for tendinopathy) relative to low stiffness fibers. These results demonstrate the feasibility of direct-written gelatin scaffolds as tendon in vitro models and provide evidence that matrix mechanical properties may be crucial factors in cell-matrix interactions during tendinopathy formation.

Trends in Injectable Biomaterials for Vocal Fold Regeneration and Long-Term Augmentation

Human vocal folds (VF), a pair of small, soft tissues in the larynx, have a layered mucosal structure with unique mechanical strength to support high-level tissue deformation by phonation. Severe pathological changes to VF have causes including surgery, trauma, age-related atrophy, and radiation, and lead to partial or complete communication loss and difficulty in breathing and swallowing. VF glottal insufficiency requires injectable VF biomaterials such as hyaluronan, calcium hydroxyapatite, and autologous fat to augment VF functions. Although these biomaterials provide an effective short-term solution, significant variations in patient response and requirements of repeat reinjection remain notable challenges in clinical practice. Tissue engineering strategies have been actively explored in the search of an injectable biomaterial that possesses the capacity to match native tissue's material properties while promoting permanent tissue regeneration. This review aims to assess the current status of biomaterial development in VF tissue engineering. The focus will be on examining state-of-the-art techniques including modification with bioactive molecules, cell encapsulation, composite materials, as well as, in situ crosslinking with click chemistry. We will discuss potential opportunities that can further leverage these engineering techniques in the advancement of VF injectable biomaterials.

Strategies for Making High-Performance Artificial Spider Silk Fibers

Artificial spider silk is an attractive material for many technical applications since it is a biobased fiber that can be produced under ambient conditions but still outcompetes synthetic fibers (e.g., Kevlar) in terms of toughness. Industrial use of this material requires bulk-scale production of recombinant spider silk proteins in heterologous host and replication of the pristine fiber's mechanical properties. High molecular weight spider silk proteins can be spun into fibers with impressive mechanical properties, but the production levels are too low to allow commercialization of the material. Small spider silk proteins, on the other hand, can be produced at yields that are compatible with industrial use, but the mechanical properties of such fibers need to be improved. Here, the literature on wet-spinning of artificial spider silk fibers is summarized and analyzed with a focus on mechanical performance. Furthermore, several strategies for how to improve the properties of such fibers, including optimized protein composition, smarter spinning setups, innovative protein engineering, chemical and physical crosslinking as well as the incorporation of nanomaterials in composite fibers, are outlined and discussed.

Study of the Preparation and Properties of Chemically Modified Materials Based on Rapeseed Meal

In recent years, there has been increasing interest in developing novel materials based on natural biopolymers as a renewable alternative to petroleum-based plastics. The availability of proteins derived from agricultural by-products, along with their favourable properties, has fostered a renewed interest in protein-based materials, promoting research in innovative technologies. In this study, we propose the use of rapeseed protein-rich meal as the main ingredient for the preparation of novel sustainable materials combining excellent environmental properties such as biodegradability and renewability. The application of sustainable products in the present high-tech society requires the modification of the basic native properties of these natural compounds. The original route proposed in this paper consists of preparation via the compression moulding of flexible biomaterials stabilized by crosslinkers/chain extenders. An investigation of the effects of different denaturing and disulfide bond reducing agents, crosslinkers, and preparation conditions on the material mechanical behaviour demonstrated that the novel materials have appreciable strength and stiffness. The results show the potential of utilizing full meal from vegetable by-products to prepare protein-based materials with guaranteed ecofriendly characteristics and mechanical properties adequate for specific structural applications.

Kinetics of Calcite Nucleation onto Sulfated Chitosan Derivatives and Implications for Water-Polysaccharide Interactions during Crystallization of Sparingly Soluble Salts

Anionic macromolecules are found at sites of CaCO3 biomineralization in diverse organisms, but their roles in crystallization are not well-understood. We prepared a series of sulfated chitosan derivatives with varied positions and degrees of sulfation, DS(SO3 -), and measured calcite nucleation rate onto these materials. Fitting the classical nucleation theory model to the kinetic data reveals the interfacial free energy of the calcite-polysaccharide-solution system, γnet, is lowest for nonsulfated controls and increases with DS(SO3 -). The kinetic prefactor also increases with DS(SO3 -). Simulations of Ca2+-H2O-chitosan systems show greater water structuring around sulfate groups compared to uncharged substituents, independent of sulfate location. Ca2+-SO3 - interactions are solvent-separated by distances that are inversely correlated with DS(SO3 -) of the polysaccharide. The simulations also predict SO3 - and NH3 + groups affect the solvation waters and HCO3 - ions associated with Ca2+. Integrating the experimental and computational evidence suggests sulfate groups influence nucleation by increasing the difficulty of displacing near-surface water, thereby increasing γnet. By correlating γnet and net charge per monosaccharide for diverse polysaccharides, we suggest the solvent-separated interactions of functional groups with Ca2+ influence thermodynamic and kinetic components to crystallization by similar solvent-dominated processes. The findings reiterate the importance of establishing water structure and properties at macromolecule-solution interfaces.

A Comprehensive Review of Nanoparticles: From Classification to Application and Toxicity

Nanoparticles are structures that possess unique properties with high surface area-to-volume ratio. Their small size, up to 100 nm, and potential for surface modifications have enabled their use in a wide range of applications. Various factors influence the properties and applications of NPs, including the synthesis method and physical attributes such as size and shape. Additionally, the materials used in the synthesis of NPs are primary determinants of their application. Based on the chosen material, NPs are generally classified into three categories: organic, inorganic, and carbon-based. These categories include a variety of materials, such as proteins, polymers, metal ions, lipids and derivatives, magnetic minerals, and so on. Each material possesses unique attributes that influence the activity and application of the NPs. Consequently, certain NPs are typically used in particular areas because they possess higher efficiency along with tenable toxicity. Therefore, the classification and the base material in the NP synthesis hold significant importance in both NP research and application. In this paper, we discuss these classifications, exemplify most of the major materials, and categorize them according to their preferred area of application. This review provides an overall review of the materials, including their application, and toxicity.

Hydrogels Based on Proteins Cross-Linked with Carbonyl Derivatives of Polysaccharides, with Biomedical Applications

Adding carbonyl groups into the hydrogel matrix improves the stability and biocompatibility of the hydrogels, making them suitable for different biomedical applications. In this review article, we will discuss the use of hydrogels based on polysaccharides modified by oxidation, with particular attention paid to the introduction of carbonyl groups. These hydrogels have been developed for several applications in tissue engineering, drug delivery, and wound healing. The review article discusses the mechanism by which oxidized polysaccharides can introduce carbonyl groups, leading to the development of hydrogels through cross-linking with proteins. These hydrogels have tunable mechanical properties and improved biocompatibility. Hydrogels have dynamic properties that make them promising biomaterials for various biomedical applications. This paper comprehensively analyzes hydrogels based on cross-linked proteins with carbonyl groups derived from oxidized polysaccharides, including microparticles, nanoparticles, and films. The applications of these hydrogels in tissue engineering, drug delivery, and wound healing are also discussed.

Antibacterial polylysine-containing hydrogels for hemostatic and wound healing applications: preparation methods, current advances and future perspectives

The treatment of various types of wounds such as dermal wounds, multidrug resistant bacteria-infected wounds, and chronic diabetic wounds is one of the critical challenges facing healthcare systems. Delayed wound healing can impose a remarkable burden on patients and health care professionals. In this case, given their unique three-dimensional porous structure, biocompatibility, high hydrophilicity, capability to provide a moist environment while absorbing wound exudate, permeability to both gas and oxygen, and tunable mechanical properties, hydrogels with antibacterial function are one of the most promising candidates for wound healing applications. Polylysine is a cationic polymer with the advantages of inherent antibacterial properties, biodegradability, and biocompatibility. Therefore, its utilization to engineer antibacterial hydrogels for accelerating wound healing is of great interest. In this review, we initially discuss polylysine properties, and then focus on the most recent advances in polylysine-containing hydrogels (since 2016) prepared using various chemical and physical crosslinking methods for hemostasis and wound healing applications. Finally, the challenges and future directions in the engineering of these antibacterial hydrogels for wound healing are discussed.

Design of Chitin Cell Culture Matrices for 3D Tissue Engineering: The Importance of Chitin Types, Solvents, Cross-Linkers, and Fabrication Techniques

This review focuses on factors and the fabrication techniques affecting the microarchitecture of tissue engineering scaffolds from the second most abundant biopolymer, chitin. It emphasizes the unique potentiality of this polymer in tissue engineering (TE) applications and highlights the variables important to achieve tailored scaffold properties. First, we describe aspects of scaffolds' design, and the complex interplay between chitin types, solvent systems, additives, and fabrication techniques to incorporate porosity, with regard to best practices. In the following section, we provide examples of scaffolds' use, with a focus on in vitro cell studies. Finally, an analysis of their biodegradability is presented. Our review emphasizes the potentiality of chitin and the pressing need for further research to overcome existing challenges and fully harness its capabilities in tissue engineering.

Insect cuticle-inspired design of sustainably sourced composite bioplastics with enhanced strength, toughness and stretch-strengthening behavior

Insect cuticles that are mainly made of chitin, chitosan and proteins provide insects with rigid, stretchable and robust skins to defend harsh external environment. The insect cuticle therefore provides inspiration for engineering biomaterials with outstanding mechanical properties but also sustainability and biocompatibility. We herein propose a design of high-performance and sustainable bioplastics via introducing CPAP3-A1, a major structural protein in insect cuticles, to specifically bind to chitosan. Simply mixing 10w/w% bioengineered CPAP3-A1 protein with chitosan enables the formation of plastics-like, sustainably sourced chitosan/CPAP3-A1 composites with significantly enhanced strength (∼90 MPa) and toughness (∼20 MJ m -3), outperforming previous chitosan-based composites and most synthetic petroleum-based plastics. Remarkably, these bioplastics exhibit a stretch-strengthening behavior similar to the training living muscles. Mechanistic investigation reveals that the introduction of CPAP3-A1 induce chitosan chains to assemble into a more coarsened fibrous network with increased crystallinity and reinforcement effect, but also enable energy dissipation via reversible chitosan-protein interactions. Further uniaxial stretch facilitates network re-orientation and increases chitosan crystallinity and mechanical anisotropy, thereby resulting in stretch-strengthening behavior. In general, this study provides an insect-cuticle inspired design of high-performance bioplastics that may serve as sustainable and bio-friendly materials for a wide range of engineering and biomedical application potentials.

Hydrogels in Gene Delivery Techniques for Regenerative Medicine and Tissue Engineering

Hydrogels are 3D networks swollen with water. They are biocompatible, strong, and moldable and are emerging as a promising biomedical material for regenerative medicine and tissue engineering to deliver therapeutic genes. The excellent natural extracellular matrix simulation properties of hydrogels enable them to be co-cultured with cells or enhance the expression of viral or non-viral vectors. Its biocompatibility, high strength, and degradation performance also make the action process of carriers in tissues more ideal, making it an ideal biomedical material. It has been shown that hydrogel-based gene delivery technologies have the potential to play therapy-relevant roles in organs such as bone, cartilage, nerve, skin, reproductive organs, and liver in animal experiments and preclinical trials. This paper reviews recent articles on hydrogels in gene delivery and explains the manufacture, applications, developmental timeline, limitations, and future directions of hydrogel-based gene delivery techniques.

Exploring the Formulation and Approaches of Injectable Hydrogels Utilizing Hyaluronic Acid in Biomedical Uses

The characteristics of injectable hydrogels make them a prime contender for various biomedical applications. Hyaluronic acid is an essential component of the matrix surrounding the cells; moreover, hyaluronic acid's structural and biochemical characteristics entice researchers to develop injectable hydrogels for various applications. However, due to its poor mechanical properties, several strategies are used to produce injectable hyaluronic acid hydrogel. This review summarizes published studies on the production of injectable hydrogels based on hyaluronic acid polysaccharide polymers and the biomedical field's applications for these hydrogel systems. Hyaluronic acid-based hydrogels are divided into two categories based on their injectability mechanisms: in situ-forming injectable hydrogels and shear-thinning injectable hydrogels. Many crosslinking methods are used to create injectable hydrogels; chemical crosslinking techniques are the most frequently investigated technique. Hybrid injectable hydrogel systems are widely investigated by blending hyaluronic acid with other polymers or nanoparticulate systems. Injectable hyaluronic acid hydrogels were thoroughly investigated and proven to demonstrate potential in various medical fields, including delivering drugs and cells, tissue repair, and wound dressings.

Development of an alginate-chitosan biopolymer composite with dECM bioink additive for organ-on-a-chip articular cartilage

In vitro use of articular cartilage on an organ-on-a-chip (OOAC) via microfluidics is challenging owing to the dense extracellular matrix (ECM) composed of numerous protein moieties and few chondrocytes, which has limited proliferation potential and microscale translation. Hence, this study proposes a novel approach for using a combination of biopolymers and decellularised ECM (dECM) as a bioink additive in the development of scalable OOAC using a microfluidic platform. The bioink was tested with native chondrocytes and mesenchymal stem cell-induced chondrocytes using biopolymers of alginate and chitosan composite hydrogels. Two-dimensional (2D) and three-dimensional (3D) biomimetic tissue construction approaches have been used to characterise the morphology and cellular marker expression (by histology and confocal laser scanning microscopy), viability (cell viability dye using flow cytometry), and genotypic expression of ECM-specific markers (by quantitative PCR). The results demonstrated that the bioink had a significant impact on the increase in phenotypic and genotypic expression, with a statistical significance level of p < 0.05 according to Student's t-test. The use of a cell-laden biopolymer as a bioink optimised the niche conditions for obtaining hyaline-type cartilage under culture conditions, paving the way for testing mechano-responsive properties and translating these findings to a cartilage-on-a-chip microfluidics system.

Genipin crosslinking promotes biomechanical reinforcement and pro-regenerative macrophage polarization in bioartificial tubular substitutes

Traumatic nerve injuries are nowadays a significant clinical challenge and new substitutes with adequate biological and mechanical properties are in need. In this context, fibrin-agarose hydrogels (FA) have shown the possibility to generate tubular scaffolds with promising results for nerve repair. However, to be clinically viable, these scaffolds need to possess enhanced mechanical properties. In this line, genipin (GP) crosslinking has demonstrated to improve biomechanical properties with good biological properties compared to other crosslinkers. In this study, we evaluated the impact of different GP concentrations (0.05, 0.1 and 0.2% (m/v)) and reaction times (6, 12, 24, 72 h) on bioartificial nerve substitutes (BNS) consisting of nanostructured FA scaffolds. First, crosslinked BNS were studied histologically, ultrastructurally and biomechanically and then, its biocompatibility and immunomodulatory effects were ex vivo assessed with a macrophage cell line. Results showed that GP was able to improve the biomechanical resistance of BNS, which were dependent on both the GP treatment time and concentration without altering the structure. Moreover, biocompatibility analyses on macrophages confirmed high cell viability and a minimal reduction of their metabolic activity by WST-1. In addition, GP-crosslinked BNS effectively directed macrophage polarization from a pro-inflammatory (M1) towards a pro-regenerative (M2) phenotype, which was in line with the cytokines release profile. In conclusion, this study considers time and dose-dependent effects of GP in FA substitutes which exhibited increased biomechanical properties while reducing immunogenicity and promoting pro-regenerative macrophage shift. These tubular substitutes could be useful for nerve application or even other tissue engineering applications such as urethra.

Cytotoxicity and Degradation Resistance of Cryo- and Hydrogels Based on Carboxyethylchitosan at Different pH Values

Background: The use of chitosan-based gels is still limited due to their restricted solubility in acid solutions, where the molecules have a positive charge. The functionalization of chitosan makes it possible to significantly expand the possibilities of using both the polymer itself and hydrogels based on its derivatives. Objective: To evaluate the effect of the conditions for the production of cryo- and hydrogels based on carboxyethylchitosan (CEC) crosslinked with glutaraldehyde on gel swelling and its resistance to degradation depending on pH and cytotoxic effects and to test the hypothesis that the amount of crosslinking agent during synthesis may affect the cytotoxicity of the gel. Methods: Gels' swelling values and degradation resistance were determined using the gravimetric method. The cytotoxic effect was evaluated during the co-cultivation of gels in the presence of human fibroblasts using light optical microscopy and flow cytometry. Results: All CEC-based cryogels had a higher equilibrium swelling value and degradation time than the CEC hydrogel in the pH range from 4.6 to 8.0. This demonstrates the superiority of cryogels relative to CEC-based hydrogels in terms of swelling potential and degradation resistance, while an increase in the number of crosslinks with glutaraldehyde contributes to longer swelling of the cryogel. The positive control (intact fibroblasts) and all gel samples were statistically identical in the number of viable cells. On the third day, the viability of the fibroblast cells was consistently high (above 95%) and did not differ between all tested CEC-based gels. And in general, the cell morphology analysis results corresponded with the results obtained in the flow cytometry-based cytotoxicity test. We also did not find proof in our experiment to support our hypothesis that the amount of crosslinking agent during synthesis may affect the cytotoxicity of the material.

MicroRNA-200c Release from Gelatin-Coated 3D-Printed PCL Scaffolds Enhances Bone Regeneration

The fabrication of clinically relevant synthetic bone grafts relies on combining multiple biodegradable biomaterials to create a structure that supports the regeneration of defects while delivering osteogenic biomolecules that enhance regeneration. MicroRNA-200c (miR-200c) functions as a potent osteoinductive biomolecule to enhance osteogenic differentiation and bone formation; however, synthetic tissue-engineered bone grafts that sustain the delivery of miR-200c for bone regeneration have not yet been evaluated. In this study, we created novel, multimaterial, synthetic bone grafts from gelatin-coated 3D-printed polycaprolactone (PCL) scaffolds. We attempted to optimize the release of pDNA encoding miR-200c by varying gelatin types, concentrations, and polymer crosslinking materials to improve its functions for bone regeneration. We revealed that by modulating gelatin type, coating material concentration, and polymer crosslinking, we effectively altered the release rates of pDNA encoding miR-200c, which promoted osteogenic differentiation in vitro and bone regeneration in a critical-sized calvarial bone defect animal model. We also demonstrated that crosslinking the gelatin coatings on the PCL scaffolds with low-concentration glutaraldehyde was biocompatible and increased cell attachment. These results strongly indicate the potential use of gelatin-based systems for pDNA encoding microRNA delivery in gene therapy and further demonstrate the effectiveness of miR-200c for enhancing bone regeneration from synthetic bone grafts.

Dual cross-linked COL1/HAp bionic gradient scaffolds containing human amniotic mesenchymal stem cells promote rotator cuff tendon-bone interface healing

The tendon-bone interface heals through scar tissue, while the lack of a natural interface gradient structure and collagen fibre alignment leads to the occurrence of retearing. Therefore, the promotion of tendon healing has become the focus of regenerative medicine. The purpose of this study was to develop a gradient COL1/ hydroxyapatite (HAp) biomaterial loaded with human amniotic mesenchymal stem cells (hAMSCs). The performance of common cross-linking agents, Genipin, 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS), and dual cross-linked materials were compared to select the best cross-linking mechanism to optimize the biological and mechanical properties of the scaffold. The optimal COL1/HAp-loaded with hAMSCs were implanted into the tendon-bone rotator cuff interfaces in rats and the effect on the tendon-bone healing was assessed by micro-CT, histological analysis, and biomechanical properties. The results showed that Genipin and EDC/NHS dual cross-linked COL1/HAp had good biological activity and mechanical properties and promoted the proliferation and differentiation of hAMSCs. Animal experiments showed that the group using a scaffold loaded with hAMSCs had excellent continuity and orientation of collagen fibers, increased fibrocartilage and bone formation, and significantly higher biomechanical functions than the control group at the interface at 12 weeks post operation. This study demonstrated that dual cross-linked gradient COL1/HAp-loaded hAMSCs could promote interface healing, thereby providing a feasible strategy for tendon-bone interface regeneration.

Evaluation of the Swelling Properties and Sorption Capacity of Maltodextrin-Based Cross-Linked Polymers

The development of polymers obtained from renewable sources such as polysaccharides has gained scientific and industrial attention. Cross-linked bio-derived cationic polymers were synthesized via a sustainable approach exploiting a commercial maltodextrin product, namely, Glucidex 2®, as the building block, while diglycidyl ethers and triglycidyl ethers were used as the cross-linking agents. The polymer products were characterized via FTIR-ATR, TGA, DSC, XRD, SEM, elemental analysis, and zeta-potential measurements, to investigate their composition, structure, and properties. Polydispersed amorphous granules displaying thermal stabilities higher than 250 °C, nitrogen contents ranging from 0.8 wt % and 1.1 wt %, and zeta potential values between 10 mV and 15 mV were observed. Subsequently, water absorption capacity measurements ranging from 800% to 1500%, cross-linking density determination, and rheological evaluations demonstrated the promising gel-forming properties of the studied systems. Finally, nitrate, sulfate, and phosphate removal tests were performed to assess the possibility of employing the studied polymer products as suitable sorbents for water remediation. The results obtained from the ion chromatography technique showed high sorption rates, with 80% of nitrates, over 90% of sulfates, and total phosphates removal.

Advances in 3D bioprinting for regenerative medicine applications

Biofabrication techniques allow for the construction of biocompatible and biofunctional structures composed from biomaterials, cells and biomolecules. Bioprinting is an emerging 3D printing method which utilizes biomaterial-based mixtures with cells and other biological constituents into printable suspensions known as bioinks. Coupled with automated design protocols and based on different modes for droplet deposition, 3D bioprinters are able to fabricate hydrogel-based objects with specific architecture and geometrical properties, providing the necessary environment that promotes cell growth and directs cell differentiation towards application-related lineages. For the preparation of such bioinks, various water-soluble biomaterials have been employed, including natural and synthetic biopolymers, and inorganic materials. Bioprinted constructs are considered to be one of the most promising avenues in regenerative medicine due to their native organ biomimicry. For a successful application, the bioprinted constructs should meet particular criteria such as optimal biological response, mechanical properties similar to the target tissue, high levels of reproducibility and printing fidelity, but also increased upscaling capability. In this review, we highlight the most recent advances in bioprinting, focusing on the regeneration of various tissues including bone, cartilage, cardiovascular, neural, skin and other organs such as liver, kidney, pancreas and lungs. We discuss the rapidly developing co-culture bioprinting systems used to resemble the complexity of tissues and organs and the crosstalk between various cell populations towards regeneration. Moreover, we report on the basic physical principles governing 3D bioprinting, and the ideal bioink properties based on the biomaterials' regenerative potential. We examine and critically discuss the present status of 3D bioprinting regarding its applicability and current limitations that need to be overcome to establish it at the forefront of artificial organ production and transplantation.

Polydopamine-Coated Polymer Nanofibers for In Situ Protein Loading and Controlled Release

Nanofibrous polymeric materials, combined with protein therapeutics, play a significant role in biomedical and pharmaceutical applications. However, the upload of proteins into nanofibers with a high yield and controlled release has been a challenging issue. Here, we report the in situ loading of a model protein (bovine serum albumin) into hydrophilic poly(vinyl alcohol) nanofibers via ice-templating, with a 100% protein drug loading efficiency. These protein-loaded nanofibers were further coated by polydopamine in order to improve the nanofiber stability and achieve a controlled protein release. The mass ratio between poly(vinyl alcohol) and bovine serum albumin influenced the percentage of proteins in composite nanofibers and fiber morphology. More particles and less nanofibers were formed with an increasing percentage of bovine serum albumin. By varying the coating conditions, it was possible to produce a uniform polydopamine coating with tunable thickness, which acted as an additional barrier to reduce burst release and achieve a more sustained release profile.

Cyanophycin modifications for applications in tissue scaffolding

Cyanophycin (CGP) is a polypeptide consisting of amino acids-aspartic acid in the backbone and arginine in the side chain. Owing to its resemblance to cell adhesive motifs in the body, it can be considered suitable for use in biomedical applications as a novel component to facilitate cell attachment and tissue regeneration. Although it has vast potential applications, starting with nutrition, through drug delivery and tissue engineering to the production of value-added chemicals and biomaterials, CGP has not been brought to the industry yet. To develop scaffolds using CGP powder produced by bacteria, its properties (e.g., biocompatibility, morphology, biodegradability, and mechanical strength) should be tailored in terms of the requirements of the targeted tissue. Crosslinking commonly stands for a primary modification method for renovating biomaterial features to these extents. Herein, we aimed to crosslink CGP for the first time and present a comparative study of different methods of CGP crosslinking including chemical, physical, and enzymatic methods by utilizing glutaraldehyde (GTA), UV exposure, genipin, 1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochloride/N-hydroxysuccinimide (EDC/NHS), and monoamine oxidase (MAO). Crosslinking efficacy varied among the samples crosslinked via the different crosslinking methods. All crosslinked CGP were non-cytotoxic to L929 cells, except for the groups with higher GTA concentrations. We conclude that CGP is a promising candidate for scaffolding purposes to be used as part of a composite with other biomaterials to maintain the integrity of scaffolds. The initiative study demonstrated the unknown characteristics of crosslinked CGP, even though its feasibility for biomedical applications should be confirmed by further examinations. KEY POINTS: • Cyanophycin was crosslinked by 5 different methods • Crosslinked cyanophycin is non-cytotoxic to L929 cells • Crosslinked cyanophycin is a promising new material for scaffolding purposes.

Gallic acid: design of a pyrogallol-containing hydrogel and its biomedical applications

Polyphenol hydrogels have garnered widespread attention due to their excellent adhesion, antioxidant, and antibacterial properties. Gallic acid (GA) is a typical derivative of pyrogallol that is used as a hydrogel crosslinker or bioactive additive and can be used to make multifunctional hydrogels with properties superior to those of widely studied catechol hydrogels. Furthermore, compared to polymeric tannic acid, gallic acid is more suitable for chemical modification, thus broadening its range of applications. This review focuses on multifunctional hydrogels containing GA, aiming to inspire researchers in future biomaterial design. We first revealed the interaction mechanisms between GA molecules and between GA and polymers, analyzed the characteristics GA imparts to hydrogels and compared GA hydrogels with hydrogels containing catechol. Subsequently, in this paper, various methods of integrating GA into hydrogels and the applications of GA in biomedicine are discussed, finally assessing the current limitations and future development potential of GA. In summary, GA, a natural small molecule polyphenol with excellent functionality and diverse interaction modes, has great potential in the field of biomedical hydrogels.

Citric acid cross-linking of a hydrogel from Aloe vera (Aloe barbadensis M.) engenders a pH-responsive, superporous, and smart material for drug delivery

The current research work is based on the evaluation of a citric acid (CA) cross-linked Aloe vera (Aloe barbadensis M.) leaf hydrogel (CL-ALH) for pH-dependent and sustained drug release application. The CA was used in different concentrations (1.25, 2.5, 5.0, and 10.0%) to cross-link the ALH using homogenous reaction conditions. The synthesis of CL-ALH was confirmed through Fourier transform and nuclear magnetic resonance spectroscopic studies. The thermal analysis indicated that the ALH and CL-ALH were stable and decomposed in two steps. The scanning electron microscopic images of CL-ALH confirmed its porous nature due to the presence of interconnected channeling. The swelling of CL-ALH was evaluated at pH 1.2, 6.8, and 7.4 as well as in deionized water (DW). High swelling of CL-ALH was observed in DW, and at pH 7.4 and 6.8 whereas, less swelling of CL-ALH was witnessed at pH 1.2. CL-ALH also exhibited swelling/deswelling behavior in DW and ethanol, DW and normal saline, and at pH 7.4 and 1.2. Tablets were prepared from CL-ALH as a release retarding agent demonstrating the sustained release of venlafaxine hydrochloride (VFX) for 8 h. Whereas, VFX was released within 4 h from the ALH-based tablet formulation (un-cross-linked material) indicating the prolonged and sustained release behavior of CL-ALH. The VFX was released from CL-ALH tablets and followed zero-order kinetics. The mechanism followed by VFX release from CL-ALH tablets was non-Fickian diffusion. The in vivo fate of the tablet formulation was observed through an X-ray study. The CL-ALH-based tablet safely passed through the stomach of a stray dog without any significant erosion and then disintegrated in the small intestine and colon. These findings confirmed that the CL-ALH is an effective excipient for designing a sustained-release drug delivery system for the small intestine and colon.

Plant-Derived Zein as an Alternative to Animal-Derived Gelatin for Use as a Tissue Engineering Scaffold

Natural biomaterials are commonly used as tissue engineering scaffolds due to their biocompatibility and biodegradability. Plant-derived materials have also gained significant interest due to their abundance and as a sustainable resource. This study evaluates the corn-derived protein zein as a plant-derived substitute for animal-derived gelatin, which is widely used for its favorable cell adhesion properties. Limited studies exist evaluating pure zein for tissue engineering. Herein, fibrous zein scaffolds are evaluated in vitro for cell adhesion, growth, and infiltration into the scaffold in comparison to gelatin scaffolds and are further studied in a subcutaneous model in vivo. Human mesenchymal stem cells (MSCs) on zein scaffolds express focal adhesion kinase and integrins such as αvβ3, α4, and β1 similar to gelatin scaffolds. MSCs also infiltrate zein scaffolds with a greater penetration depth than cells on gelatin scaffolds. Cells loaded onto zein scaffolds in vivo show higher cell proliferation and CD31 expression, as an indicator of blood vessel formation. Findings also demonstrate the capability of zein scaffolds to maintain the multipotent capability of MSCs. Overall, findings demonstrate plant-derived zein may be a suitable alternative to the animalderived gelatin and demonstrates zein's potential as a scaffold for tissue engineering.

Enhancement of mechanical and barrier properties of chitosan-based bionanocomposites films reinforced with eggshell-derived hydroxyapatite nanoparticles

In this study, Hydroxyapatite nanoparticles (HANPs), derived from eggshell waste, were employed to reinforce chitosan biopolymer-based films through the solvent-casting method. The impact of varying HANPs content (1%, 3%, 5%, and 10 wt %) in bionanocomposites was investigated. The influence of HANPs addition on the final film properties was comprehensively analyzed using Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA), mechanical (tensile) testing, and Water Vapor Permeability (WVP). The morphological aspects of bionanocomposites and the dispersion of nanoparticles within the matrix were studied using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and X-ray Diffraction (XRD). The structural changes in the films were probed using Fourier-Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS) techniques. Results indicated that the addition of 1% and 3% of HANPs exhibited a higher glass transition temperature and improved thermal stability in bionanocomposites. Films with 3% HANPs content exhibited a notable increase in tensile strength, showing a 61.54% increase, while films with 1% HANPs content displayed a 52% reduction in WVP compared to pristine chitosan films. These findings underscore the significant potential of chitosan-hydroxyapatite bionanocomposite films for applications in food packaging applications.

Collagen Networks under Indentation and Compression Behave Like Cellular Solids

Simple synthetic and natural hydrogels can be formulated to have elastic moduli that match biological tissues, leading to their widespread application as model systems for tissue engineering, medical device development, and drug delivery vehicles. However, two different hydrogels having the same elastic modulus but differing in microstructure or nanostructure can exhibit drastically different mechanical responses, including their poroelasticity, lubricity, and load bearing capabilities. Here, we investigate the mechanical response of collagen-1 networks to local and bulk compressive loads. We compare these results to the behavior of polyacrylamide, a fundamentally different class of hydrogel network consisting of flexible polymer chains. We find that the high bending rigidity of collagen fibers, which suppresses entropic bending fluctuations and osmotic pressure, facilitates the bulk compression of collagen networks under infinitesimal applied stress. These results are fundamentally different from the behavior of flexible polymer networks in which the entropic thermal fluctuations of the polymer chains result in an osmotic pressure that must first be overcome before bulk compression can occur. Furthermore, we observe minimal transverse strain during the axial loading of collagen networks, a behavior reminiscent of open-celled cellular solids. Inspired by these results, we applied mechanical models of cellular solids to predict the elastic moduli of the collagen networks and found agreement with the moduli values measured through contact indentation. Collectively, these results suggest that unlike flexible polymer networks that are often considered incompressible, collagen hydrogels behave like rigid porous solids that volumetrically compress and expel water rather than spreading laterally under applied normal loads.

Functional Hydrogels for Delivery of the Proteolytic Enzyme Serratiopeptidase

Hydrogels are superior wound dressings because they can provide protection and hydration of the wound, as well as the controlled release of therapeutic substances to aid tissue regeneration and the healing process. Hydrogels obtained from natural precursors are preferred because of their low cost, biocompatibility, and biodegradability. We describe the synthesis of novel functional hydrogels based on two natural products-citric acid (CA) and pentane-1,2,5-triol (PT, a product from lignocellulose processing) and poly(ethylene glycol) (PEG-600)-via an environment friendly approach. The hydrogels were prepared via monomer crosslinking through a polycondensation reaction at an elevated temperature in the absence of any solvent. The reagents were blended at three different compositions with molar ratios of hydroxyl (from PT and PEG) to carboxyl (from CA) groups of 1:1, 1:1.4, and 1.4:1, respectively. The effect of the composition on the physicomechanical properties of materials was investigated. All hydrogels exhibited pH-sensitive behavior, while the swelling degree and elastic modulus were dependent on the composition of the polymer network. The proteolytic enzyme serratiopeptidase (SER) was loaded into a hydrogel via physical absorption as a model drug. The release profile of SER and the effects of the enzyme on healthy skin cells were assessed. The results showed that the hydrogel carrier could provide the complete release of the loaded enzyme.