The monitoring of pesticides in water matrices and the analytical criticalities: A review

Application of L-leucine-based natural deep eutectic solvent and ferroferric oxide magnetic nanoparticles modified with silica and zeolitic imidazolate framework-8 (Fe3O4@SiO2@ZIF-8) for extracting organophosphorus pesticides from cucumber

An amino acid-based natural deep eutectic solvent (AABNADES) consisting of L-leucine, thymol, and lactic acid developed as a media for removing interfering agents, along with a magnetic adsorbent called ferroferric oxide modified with silica and zeolitic imidazolate framework-8 (Fe3O4@SiO2@ZIF-8) to determine the residue of four organophosphorus (OPs) pesticides in cucumber samples. The AABNADES was characterized using fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) spectroscopy. Magnetic adsorbents were characterized via field emission scanning electron microscopy (FESEM) and FTIR. Extraction conditions were optimized using response surface methodology (RSM) with a Box-Behnken design (BBD). The method was linear, accurate, and in the range of 10-50 μg/l. The detection and quantification limits ranged from 2.88-5.95 and 8.73-18.05 μg/l, respectively. The recovery for pesticide residues ranged from 97.1-143.2 % with a relative standard deviation of 3.97-12.24 %. The method is cost-effective, suitable for analyzing OPs in cucumber, and minimizes the use of harmful solvents.

Development of a UPLC-MS/MS method for pesticide analysis in paddy water and evaluation of anodic TiO2 nanostructured films for pesticide photodegradation and antimicrobial applications

Pesticide contamination in agricultural water poses serious environmental and public health risks, particularly due to the accumulation of harmful residues that threaten aquatic ecosystems and human health. This study investigated the levels of five pesticides-carbaryl (CBR), methiocarb (MTC), diazinon (DZN), chlorpyrifos (CLO), and cypermethrin (CYPER)-in agricultural water samples from Can Tho City and Hau Giang Province, Vietnam. Ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was employed for their detection and quantification. Chlorpyrifos was the most frequently detected pesticide (32.5%), with concentrations ranging from 1.7 to 10.9 ng mL-1. The concentrations of cypermethrin, carbaryl, methiocarb, and diazinon were 2.6-9.4 ng mL-1, 1.3-14.3 ng mL-1, 4.1-7.7 ng mL-1, and 2.8-10.5 ng mL-1, respectively. The persistence of pesticide residues in the water samples highlights the significant contamination concerns in the region. To address this issue, two types of TiO2 nanophotocatalysts-TiO2 nanotube arrays (TNAs) and TiO2 nanowires on nanotube arrays (TNWs/TNAs)-were synthesized for the photocatalytic degradation of the identified pesticides. Under UV-vis irradiation (∼96 mW cm-2), both nanostructures achieved rapid pesticide degradation, with removal efficiencies of up to 99% within 25 minutes. TNWs/TNAs exhibited superior photocatalytic performance, attributed to their increased surface area compared to TNAs. In addition to pesticide degradation, their antibacterial activity was assessed. Under weak UV-vis light (6.3 mW cm-2), both TNAs and TNWs/TNAs achieved 100% antibacterial efficacy against Escherichia coli, significantly higher than the 68% efficacy of UV light treatment alone. Even under dark conditions, TNWs/TNAs demonstrated enhanced antibacterial activity, achieving 63% efficacy compared to 12% for TNAs. These results underscore the dual functionality of TNWs/TNAs as effective photocatalysts for both pesticide degradation and bacterial inactivation, presenting a promising approach for agricultural water treatment.

Two functionalized metal-organic frameworks with multiple hydrogen-bond donors as SALDI-TOF-MS matrix for sensitive and rapid determination of pesticides

Surface-assisted laser desorption/ionization-time of flight-mass spectrometry (SALDI-TOF-MS) generally possess difficulties for analysis of small-molecules. The development of novel matrices as alternatives to conventional matrices has shown to be an effective strategy for mitigating the interference in low molecular weight. In this study, two functionalized metal-organic frameworks with multiple hydrogen-bond donors (UIO-66(Zr)-MHD and MIL-100(Fe)-MHD) were synthesized and used as matrices in the laser desorption/ionization (LDI) process. The introduction of amino, oxhydryl and carboxyl groups not only significantly enhanced the adsorption capacity for different targets but also narrowed the band gap, thereby facilitating the efficient transfer of laser energy from the matrices to the analytes. On this basis, a sensitive SALDI-TOF-MS method based on the functionalized MOFs was successfully employed for simultaneous analysis of 16 pesticides in tobacco and water samples. The results demonstrated that the developed functionalized MOFs showed compelling application prospects for the sensitive analysis of low-concentration and low-mass molecule compounds in complex sample matrices.

Stir bar sorptive extraction TDU-GC-QToF-HRMS for screening 230 pesticides in waters surrounding banana plantations in Costa Rica through community engagement

"The Gems of Water" citizens' engagement activity united the Joint Research Centre (JRC) of the European Commission with the Costa Rican based NGO Coral Conservation to screen for pesticides in local rivers using wide-screening technology. Citizens used stir bar sorptive extraction to collect and extract samples from three rivers and two wells in the south Caribbean region of Costa Rica, an area known for export-based banana agriculture. The advanced wide-screening method provided by the JRC Water Laboratory enabled the assessment of 230 agrochemicals. While the JRC supplied the technical equipment and protocols, the pesticide screening to be investigated and the monitoring scheme were co-designed with Coral Conservation group members, a local NGO. The pilot study collected new data on pesticide occurrence and their toxicity in the local tropical environment, complementing on-going studies in the region. The study found 23 pesticides, the majority of which are fungicides registered for use in banana cultivation (azoxystrobin, difenoconazole, fluopyram, thiabendazole). Cumulative pesticide concentrations ranged from 5.3 ng/L in the upper catchment of the Estrella River (E-a) to 954.9 ng/L in the lower catchment of the Sixaola River (S-c), where the highest individual compound concentration was also recorded for fungicide azoxystrobin (425.0 ng/L). At the sampling sites along the Carbon River and in the lower catchment of the Sixaola River, compounds fenamiphos, fenpropathrin and azoxystrobin were the main responsible for the elevated toxic units (Toxic Units >0.01) for crustacean daphnia magna. Beyond highlighting the link between agrochemical occurrences in surface waters and surrounding land use, the citizens' engagement aspect promotes alternative water quality monitoring methods, raising awareness and scientific literacy in local communities and underscoring the value of bottom-up approaches.

Harnessing the power of biosensors for environmental monitoring of pesticides in water

The current strong reliance on synthetic chemicals, namely pesticides, is far from environmentally sustainable. These xenobiotics contribute significantly to global change and to the current biodiversity crisis, but have been overlooked when compared to other agents (e.g., climate change). Aquatic ecosystems are particularly vulnerable to pesticides, making monitoring programs essential to preserve ecosystem health, safeguard biodiversity, ensure water quality, and mitigate potential human health risks associated with contaminated water sources. Biosensors show great potential as time/cost-effective and disposable systems for the high-throughput detection (and quantification) of these pollutants. In this mini-review, we provide an overview of biosensors specifically developed for environmental water monitoring, covering different pesticide classes (and active ingredients), and types of biosensors (according to the bio-recognition element) and transducers, as well as the nature of sample matrices analyzed. We highlight the variety of biosensors that have been developed and successfully applied to detection of pesticides in aqueous samples, including enzymatic biosensors, immunosensors, aptasensors, and whole cell-based biosensors. While most biosensors have been designed to detect insecticides, expanding their compound target range could significantly streamline monitoring of environmental contaminants. Despite limitations related to stability, reproducibility, and interference from environmental factors, biosensors represent a promising and sustainable technology for pesticide monitoring in the aquatic environments, offering sensitivity and specificity, as well as portability and real-time results. We propose that biosensors would be most effective as an initial screening step in a tiered assessment, complementing conventional methods. KEY POINTS: • Pesticides harm aquatic ecosystems and biodiversity, requiring better monitoring • Biosensors offer cost-effective solutions to detect pesticides in water samples • Biosensors complement conventional methods as a sustainable tool for initial screens.

Fluorescence sensor based on Methionine-Modified silver nanoparticles located on Fe-BTC metal-organic framework (Meth-AgNPs@Fe-BTC) for trace detection of fenitrothion pesticide in aqueous samples

This research introduces a new "turn-on mode" fluorescence sensor for the detection of fenitrothion (FNT) pesticide in various samples. The sensor is constructed using a porous metal-organic framework (Fe-BTC) as a template to locate silver nanoparticles (AgNPs) and methionine amino acid (Meth). Methionine acts as a bridge, facilitating the interaction between FNT and AgNPs, which subsequently results in the release of AgNPs from the composite structure. The physicochemical properties of the synthesized Meth-AgNPs@Fe-BTC composite were analyzed by Fourier-transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), Energy-dispersive X-ray spectroscopy (EDAX), Transmission electron microscopy (TEM), and elemental mapping (MAP) analysis. The sensing system is based on tracking the fluorescence of the synthetic composite in such a way that the intensity of the fluorescence of the composite increases in the presence of different concentrations of fenitrothion (FNT). The effective parameters on the sensor signal, including composite dosage, pH, sonication and reaction time were investigated and optimized. The calibration graph, under optimal conditions, exhibited linearity in the concentration range of 2-95 nM for FNT, with a limit of detection of 1.9 nM. The suggested sensor was successfully validated by analyzing FNT in several real water samples and fruit juices. This research presents a significant technical achievement in the development of a fluorescence sensor for the detection of FNT, offering a sensitive and reliable method for environmental monitoring and public health preservation.

Characterizing environmental contamination by plant protection products along the land-to-sea continuum:a focus on France and French overseas territories

Environmental compartments are contaminated by a broad spectrum of plant protection products (PPPs) that are currently widely used in agriculture or, for some of them, whose use was banned many years ago. The aim of this study is to draw up an overview of the levels of contamination of soils, continental aquatic environments, seawaters and atmosphere by organic PPPs in France and the French overseas territories, based on data from the scientific publications and the grey literature. It is difficult to establish an exhaustive picture of the overall contamination of the environment because the various compartments monitored, the monitoring frequencies, the duration of the studies and the lists of substances are not the same. Of the 33 PPPs most often recorded at high concentration levels in at least one compartment, 5 are insecticides, 9 are fungicides, 15 are herbicides and 4 are transformation products. The PPP contamination of the environment shows generally a seasonal variation according to crop cycles. On a pluriannual scale, the contamination trends are linked to the level of use driven by the pest pressure, and especially to the ban of PPP. Overall, the quality of the data acquired has been improved thanks to new, more integrative sampling strategies and broad-spectrum analysis methods that make it possible to incorporate the search for emerging contaminants such as PPP transformation products. Taking into account additional information (such as the quantities applied, agricultural practices, meteorological conditions, the properties of PPPs and environmental conditions) combined with modelling tools will make it possible to better assess and understand the fate and transport of PPPs in the environment, inter-compartment transfers and to identify their potential impacts. Simultaneous monitoring of all environmental compartments as well as biota in selected and limited relevant areas would also help in this assessment.

Discovery of multiple bee-hazardous pesticides in ornamental plants via the Bee-Plex multi-target microsphere screening method

Exposure to pesticides is one of the main drivers of global bee decline. However, the occurrence of pesticides in bee-attracting crops remains underexposed due to the lack of efficient on-site screening approaches for multi-analyte monitoring. Utilizing color-encoded superparamagnetic microspheres, we constructed a portable 8-plex indirect competitive microsphere-based immunoassay for the simultaneous determination of multiple bee-hazardous residues (Bee-Plex). Through a single measurement within 40 min, Bee-Plex exhibited high sensitivities with IC50values of 0.04, 0.08, 0.14, 0.15, 0.78, 0.86, 7.72, and 8.79 ng/mL for imidacloprid, parathion, fipronil, emamectin, carbofuran, chlorpyrifos, fenpropathrin and carbaryl, respectively. Moreover, the implementation of multiple broad-specific antibodies enables a wide-range screening profile for 30 pesticides and pesticide metabolites, detecting 6 neonicotinoids, 6 N-methyl carbamates 6 organophosphates, 5 avermectins, 5 pyrethroids and 2 phenylpyrazoles. The combination of Bee-Plex screening (93 % accuracy) and LC-MS/MS confirmatory analysis revealed contaminations of neonicotinoids (100 %) and avermectins (70 %) in roses, with occurrence frequencies of 79 %, 79 %, 21 %, 21 %, 7 %, and 7 % for imidacloprid, acetamiprid, clothianidin, thiacloprid, imidaclothiz, and nitenpyram, respectively. Above all, this study offers a powerful analytical tool for rapid screening of multiple bee-hazardous pesticides, offering new insights in the occurrence of multi-pesticide contamination in ornamental plants.

Cathodic poised potential stimulated the electron-sensitive C-P lyase pathway in glyphosate biodegradation

Glyphosate, the most widely used herbicide globally, is accumulating in the environment and poses significant potential eco- and bio-toxicity risks. While natural attenuation of glyphosate has been reported, the efficacy varies considerably and the dominant metabolite, aminomethylphosphonic acid (AMPA), is potentially more persistent and toxic. This study investigated the bioelectrochemical system (BES) for glyphosate degradation under anaerobic, reductive conditions. Atomistic simulations using density functional theory (DFT) predicted increased thermodynamic favorability for the non-dominant C-P lyase degradation pathway under external charge, which suppressed AMPA production. Experimental results confirmed that cathodic poised potential (-0.4 V vs. Ag/AgCl) enhanced glyphosate degradation (75 % in BES vs. ∼40 % in the control conditions after 37 days), and lowered the AMPA yield (0.52 mol AMPA yield per mol glyphosate removed in BES vs. 0.77-0.86 mol mol-1 in the control conditions). Geobacter lovleyi was likely the active species driving the C-P lyase pathway, as evidenced by the increase of its relative abundance, the upregulation of its extracellular electron transfer genes (most notably mtr) and the up-regulation of its phnJ and hcp genes (encoding C-P layse and hydroxylamine reductase respectively).

Development and testing of an efficient micropollutant monitoring strategy across a large watershed

In recent decades, extensive monitoring programmes have been conducted at the national, international, and project levels with the objective of expanding our understanding of the contamination of surface waters with micropollutants, which are often referred to as hazardous substances (HS). It has been demonstrated that HS enter surface waters via a number of pathways, including groundwater, atmospheric deposition, soil erosion, and urban systems. Given the ever-growing list of substances and the high resource demand associated with laboratory analysis, it is common practice to quantify the listed pathways based on emission factors derived from temporally and spatially constrained monitoring programmes. The derivation calculations are subject to high uncertainties, and substantial knowledge gaps remain regarding the relative importance of the unique pathways, territories, and periods. This publication presents a monitoring method designed to quantify the unique emission pathways of HS in large geographical areas characterized by differences in land use, population, and economic development. The method will be tested for a wide range of HS (ubiquitous organic and inorganic pollutants, pesticides, pharmaceuticals) throughout small sub-catchments located on tributaries. The results of the test application demonstrate a high diversity of both emission loads and instream concentrations throughout different regions for numerous substances. Riverine concentrations are found to be highly dependent on the flow status. Soil concentration levels of polycyclic aromatic hydrocarbons (PAH) and perfluoroalkyl substances (PFAS) are found to be in proportion, whereas that of potentially toxic elements (PTE) in a reverse relationship with economic development. In many instances, concentration levels are also contingent upon land use. The findings of this study reinforce the necessity for the implementation of harmonised and concerted HS monitoring programmes, which should encompass a diverse range of substances, emission sources, pathways and geographical areas. This is essential for the reliable development of emission factors.

Novel ultrasound assisted extraction and d-SPE clean-up for the analysis of multiple legacy and emerging organic contaminants in edible fish

Polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), novel brominated flame retardants (NBFRs), phthalate esters (PAEs) are pervasive environmental pollutants, posing threats to both ecosystems and human health. Although several analytical methods were developed for these compounds, they are not performed simultaneously. This study addresses the need for a sustainable, novel, analytical approach capable of simultaneously determining these diverse chemical classes in edible fish muscles. Employing ultrasound extraction coupled with dispersive solid-phase extraction (d-SPE) as a cleanup procedure, the method was compared to conventional techniques, revealing significant improvements. Analytical parameters were thoroughly assessed, and the innovative method demonstrated notable advantages, reducing extraction and purification times by approximately 74-80 % and solvent consumption by around 94-97 %. Applied to Mediterranean Sea fish samples, the results underscore the method's potential as a viable, sustainable alternative to traditional approaches, promising enhanced efficiency and reduced environmental impact.

Supramolecular Materials as Solid-Phase Microextraction Coatings in Environmental Analysis

Solid-phase microextraction (SPME) has been widely proposed for the extraction, clean-up, and preconcentration of analytes of environmental concern. Enrichment capabilities, preconcentration efficiency, sample throughput, and selectivity in extracting target compounds greatly depend on the materials used as SPME coatings. Supramolecular materials have emerged as promising porous coatings to be used for the extraction of target compounds due to their unique selectivity, three-dimensional framework, flexible design, and possibility to promote the interaction between the analytes and the coating by means of multiple oriented functional groups. The present review will cover the state of the art of the last 5 years related to SPME coatings based on metal organic frameworks (MOFs), covalent organic frameworks (COFs), and supramolecular macrocycles used for environmental applications.

Biopolymer-based beads for the adsorptive removal of organic pollutants from wastewater: Current state and future perspectives

Among biopolymer-based adsorbents, composites in the form of beads have shown promising results in terms of high adsorption capacity and ease of separation from the effluents. This review addresses the potential of biopolymer-based beads to remediate wastewaters polluted with emerging organic contaminants, for instance dyes, active pharmaceutical ingredients, pesticides, phenols, oils, polyaromatic hydrocarbons, and polychlorinated biphenyls. High adsorption capacities up to 2541.76 mg g-1 for dyes, 392 mg g-1 for pesticides and phenols, 1890.3 mg g-1 for pharmaceuticals, and 537 g g-1 for oils and organic solvents have been reported. The review also attempted to convey to its readers the significance of wastewater treatment through adsorption by providing an overview on decontamination technologies of organic water contaminants. Various preparation methods of biopolymer-based gel beads and adsorption mechanisms involved in the process of decontamination have been summarized and analyzed. Therefore, we believe there is an urge to discuss the current state of the application of biopolymer-based gel beads for the adsorption of organic pollutants from wastewater and future perspectives in this regard since it is imperative to treat wastewater before releasing into freshwater bodies.

Analytical methods for determining environmental contaminants of concern in water and wastewater

Control and prevention of environmental pollution have emerged as paramount global concerns. Anthropogenic activities, such as industrial discharges, agricultural runoff, and improper waste disposal, introduce a wide range of contaminants into various ecosystems. These pollutants encompass organic and inorganic compounds, particulates, microorganisms, and disinfection by-products, posing severe threats to human health, ecosystems, and the environment. Effective monitoring methods are indispensable for assessing environmental quality, identifying pollution sources, and implementing remedial measures. This paper suggests that the development and utilization of highly advanced analytical tools are both essential for the analysis of contaminants in water samples, presenting a foundational hypothesis for the review. This paper comprehensively reviews the development and utilization of highly advanced analytical tools which is mandatory for the analysis of contaminants in water samples. Depending on the specific pollutants being studied, the choice of analytical methods widely varies. It also reveals insights into the diverse applications and effectiveness of these methods in assessing water quality and contaminant levels. By emphasizing the critical role of the reviewed monitoring methods, this review seeks to deepen the understanding of pollution challenges and inspire innovative monitoring solutions that contribute to a cleaner and more sustainable global environment.•Urgent global concerns: control and prevention of pollution from diverse sources.•Varied contaminants, diverse methods: comprehensive review of analytical tools.•Inspiring a sustainable future: innovative monitoring for a cleaner environment.

Solid-phase microextraction - a future technique in pharmacology and coating trends

Traditional sample preparation techniques based on liquid-liquid extraction (LLE) or solid-phase extraction (SPE) often suffer from a major error due to the matrix effects caused by significant co-extraction of matrix components. The implementation of a modern extraction technique such as solid-phase microextraction (SPME) was aimed at reducing analysis time and the use of organic solvents, as well as eliminating pre-analytical and analytical errors. Solid-phase microextraction (SPME) is an innovative technique for extracting low molecular weight compounds (less than 1500 Da) from highly complex matrices, including biological matrices. It has a wide range of applications in various types of analysis including pharmaceutical, clinical, metabolomics and proteomics. SPME has a number of advantages over other extraction techniques. Among the most important are low environmental impact, the ability to sample and preconcentrate analytes in one step, simple automation, and the ability to extract multiple analytes simultaneously. It is expected to become, in the future, another method for cell cycle research. Numerous available literature sources prove that solid-phase microextraction can be a future technique in many scientific fields, including pharmaceutical sciences. This paper provides a literature review of trends in SPME coatings and pharmacological applications.

Integrating Wireless Remote Sensing and Sensors for Monitoring Pesticide Pollution in Surface and Groundwater

Water constitutes an indispensable resource crucial for the sustenance of humanity, as it plays an integral role in various sectors such as agriculture, industrial processes, and domestic consumption. Even though water covers 71% of the global land surface, governments have been grappling with the challenge of ensuring the provision of safe water for domestic use. A contributing factor to this situation is the persistent contamination of available water sources rendering them unfit for human consumption. A common contaminant, pesticides are not frequently tested for despite their serious effects on biodiversity. Pesticide determination in water quality assessment is a challenging task because the procedures involved in the extraction and detection are complex. This reduces their popularity in many monitoring campaigns despite their harmful effects. If the existing methods of pesticide analysis are adapted by leveraging new technologies, then information concerning their presence in water ecosystems can be exposed. Furthermore, beyond the advantages conferred by the integration of wireless sensor networks (WSNs), the Internet of Things (IoT), Machine Learning (ML), and big data analytics, a notable outcome is the attainment of a heightened degree of granularity in the information of water ecosystems. This paper discusses methods of pesticide detection in water, emphasizing the possible use of electrochemical sensors, biosensors, and paper-based sensors in wireless sensing. It also explores the application of WSNs in water, the IoT, computing models, ML, and big data analytics, and their potential for integration as technologies useful for pesticide monitoring in water.

Assessing glyphosate and AMPA pesticides in the Ofanto River waters and sediments

In the present study, we determined glyphosate (GPS) and aminomethylphosphonic acid (AMPA) in the water and sediments of the Ofanto River (Italy), evaluating their transport from the mouth to the sea. Sediments were collected twice in 2021 during low and high tide; waters were sampled on a seasonal basis. The results showed the prevalence of GPS and AMPA in the water with concentrations equal to 190 and 3053 ng/l, respectively. We also found GPS and AMPA in the sediments with values of 0.95 and 11.34 ng/g. In water, pesticides were detected in all seasons with peaks in concentrations during summer and spring. A significant positive correlation between the pesticides in the sediments and the water pH and a negative correlation with salinity was observed. An estimation of the average loads revealed a discharge of 64.11 kg/yr. of GPS and 958.37 kg/yr. of AMPA from the river to the marine environment.

Amine Switchable Hydrophilic Solvent Vortex-Assisted Homogeneous Liquid-Liquid Microextraction and GC-MS for the Enrichment and Determination of 2, 6-DIPA Additive in Biodegradable Film

2, 6-diisopropylaniline (2, 6-DIPA) is a crucial non-intentionally organic additive that allows the assessment of the production processes, formulation qualities, and performance variations in biodegradable mulching film. Moreover, its release into the environment may have certain effects on human health. Hence, this study developed simultaneous heating hydrolysis-extraction and amine switchable hydrophilic solvent vortex-assisted homogeneous liquid-liquid microextraction for the gas chromatography-mass spectrometry analysis of the 2, 6-DIPA additive and its corresponding isocyanates in poly(butylene adipate-co-terephthalate) (PBAT) biodegradable agricultural mulching films. The heating hydrolysis-extraction conditions and factors influencing the efficiency of homogeneous liquid-liquid microextraction, such as the type and volume of amine, homogeneous-phase and phase separation transition pH, and extraction time were investigated and optimized. The optimum heating hydrolysis-extraction conditions were found to be a H2SO4 concentration of 2.5 M, heating temperature of 87.8 °C, and hydrolysis-extraction time of 3.0 h. As a switchable hydrophilic solvent, dipropylamine does not require a dispersant. Vortex assistance is helpful to speed up the extraction. Under the optimum experimental conditions, this method exhibits a better linearity (0.0144~7.200 μg mL-1 with R = 0.9986), low limit of detection and quantification (0.0033 μg g-1 and 0.0103 μg g-1), high extraction recovery (92.5~105.4%), desirable intra- and inter-day precision (relative standard deviation less than 4.1% and 4.7%), and high enrichment factor (90.9). Finally, this method was successfully applied to detect the content of the additive 2, 6-DIPA in PBAT biodegradable agricultural mulching films, thus facilitating production process monitoring or safety assessments.

Construction of a Conductive Polymer/AuNP/Cyanobacteria-Based Biophotovoltaic Cell Harnessing Solar Energy to Generate Electricity via Photosynthesis and Its Usage as a Photoelectrochemical Pesticide Biosensor: Atrazine as a Case Study

In this research, a cyanobacteria (Leptolyngbia sp.)-based biological photovoltaic cell (BPV) was designed. This clean energy-friendly BPV produced a photocurrent as a result of illuminating the photoanode and cathode electrodes immersed in the aqueous medium with solar energy. For this purpose, both electrodes were first coated with conductive polymers with aniline functional groups on the gold electrodes. In the cell, the photoanode was first coated with a gold-modified poly 4-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)benzamine polymer, P(SNS-Aniline). Thioaniline-functionalized gold nanoparticles were used to provide a cross-link formation with bis-aniline conductive bonds with the conductive polymer using electrochemical techniques. Leptolyngbia sp., one of the cyanobacteria that can convert light energy into chemical energy, was attached to this layered electrode surface. The cathode of the cell was attached to the gold electrode surface with P(SNS-Aniline). Then, the bilirubin oxidase (BOx) enzyme was immobilized on this film surface with glutaraldehyde activation. This cell, which can use light, thanks to cyanobacteria, oxidized and split water, and oxygen was obtained at the photoanode electrode. At the cathode electrode, the oxygen gas was reduced to water by the bioelectrocatalytic method. To obtain a high photocurrent from the BPV, necessary optimizations were made during the design of the system to increase electron transport and strengthen its transfer. While the photocurrent value obtained with the designed BPV in optimum conditions and in the pseudosteady state was 10 mA/m2, the maximum power value obtained was 46.5 mW/m2. In addition to storing the light energy of the system, studies have been carried out on this system as a pesticide biosensor. Atrazine biosensing via the BPV system was analytically characterized between 0.1 and 1.2 μM concentrations for atrazine, and a very low detection limit was found as 0.024 μM. In addition, response time and recovery studies related to pesticide biosensor properties of the BPV were also investigated.

Pesticide water variability and prioritization: The first steps towards improving water management strategies in irrigation hydro-agriculture areas

The presence of pesticides in aquatic ecosystems poses significant risks to non-target organisms, necessitating monitoring and environmental risk assessment. This study aimed to evaluate the dynamics and environmental risk of pesticides in a hydro-agricultural area with intensive agricultural practices, in the Mediterranean region (South of Portugal). Seasonality and location influenced pesticide numbers and concentrations, with the highest levels observed during the dry season. Triazines, phenylureas, and organophosphates were the predominant pesticide classes, with terbuthylazine, bentazone, terbutryn, diazinon, and metolachlor exhibiting the highest detection frequencies (68 % to 72 %). Notably, 44 % of the quantified pesticides are no longer authorized in Portugal, with 33 % posing a high environmental risk. Some insecticides, including imidacloprid, methiocarb, and malathion, were occasionally detected at concentrations that posed high risks to the aquatic ecosystem (RQ ≥ 1). Irgarol, an algicide used in irrigation canals, presented a high risk in 91 % of the analysed samples. The study's distribution profile of pesticides revealed a significant transportation of these compounds from reservoirs to irrigation hydrants, establishing them as a secondary source of crop and environmental contamination. Additionally, the assessment of spatial distribution and environmental risk allowed for the identification of specific pollutants in different locations, prioritizing them based on their ecotoxicological risk to aquatic ecosystems. These findings reinforce the importance of implementing management measures at the level of hydro-agricultural areas, helping to stop the cycle of pesticide contamination. Only this type of strategy will make it possible to protect water quality, biodiversity and the health of citizens, contributing to the European Union's objectives of improving the condition of freshwater bodies and promoting the sustainable use of pesticides.

Extremozyme-Based Biosensors for Environmental Pollution Monitoring: Recent Developments

Extremozymes combine high specificity and sensitivity with the ability to withstand extreme operational conditions. This work presents an overview of extremozymes that show potential for environmental monitoring devices and outlines the latest advances in biosensors utilizing these unique molecules. The characteristics of various extremozymes described so far are presented, underlining their stability and operational conditions that make them attractive for biosensing. The biosensor design is discussed based on the detection of photosynthesis-inhibiting herbicides as a case study. Several biosensors for the detection of pesticides, heavy metals, and phenols are presented in more detail to highlight interesting substrate specificity, applications or immobilization methods. Compared to mesophilic enzymes, the integration of extremozymes in biosensors faces additional challenges related to lower availability and high production costs. The use of extremozymes in biosensing does not parallel their success in industrial applications. In recent years, the "collection" of recognition elements was enriched by extremozymes with interesting selectivity and by thermostable chimeras. The perspectives for biosensor development are exciting, considering also the progress in genetic editing for the oriented immobilization of enzymes, efficient folding, and better electron transport. Stability, production costs and immobilization at sensing interfaces must be improved to encourage wider applications of extremozymes in biosensors.

The non-edible and disposable parts of oyster mushroom, as novel adsorbent for quantitative removal of atrazine and its degradation products from synthetic wastewater

In this study, the non-edible part of oyster mushroom was utilized for quantitative removal of the most commonly used s-triazine herbicide; atrazine and its breakdown products including deethylatrazine (DEA), hydroxyatrazine (ATOH) and deisopropylatrazine (DIA) from aqueous samples. The functional groups available on the oyster mushroom were studied applying FTIR before and after adsorption. Experimental parameters influencing the uptake process including acidity, sorbent mass, sorption time, initial analyte quantities, and agitation speed were analysed and the maximum removal was found at 4, 0.3 g, 120 min, 0.5 mg L-1, and 150 rpm, respectively. Accordingly, the adsorption capacities of 0.994, 1.113, 0.991 and 1.016 mg g-1 were obtained for DIA, DEA, ATOH and atrazine, respectively. The adsorption characteristics were discussed utilizing Langmuir and Freundlich isotherm models. The fundamental characteristic of the Langmuir isotherm, which can be elaborated using separation factor or equilibrium parameter, RL, and coefficient of variation, R2, were (0.761, 0.996), (0.884, 0.975), (0.908, 0.983) and (0.799, 0.984) for DIA, DEA, ATOH and Atrazine, respectively. These findings showed that all analytes' adsorption processes were fitted well to the Langmuir adsorption isotherm, indicating that the adsorbent surface was covered in a monolayer. The kinetics was also evaluated using the pseudo-first and pseudo-second order models. The coefficient of determination, r2, were found to be 0.09703, 0.9989, 0.9967 and 0.9998 for DIA DEA, ATOH and atrazine, respectively, for pseudo-second order, signifying that, all analytes were found to follow the pseudo-second order rate model showing that the rate limiting step is chemisorption in the sorption process. Based on these findings, the non-edible and disposable part of the oyster mushrooms can be utilized as a preferred alternative biosorbent for the uptake of the target compounds analysed and other pollutants possessing comparable physicochemical characteristics occurring in various water bodies.

Advanced micro-extraction techniques (SPME, HiSorb) for the determination of goat cheese whey wastewater VOCs

HiSorb and solid-phase microextraction (SPME), two environmentally friendly micro-extraction techniques based on the same fundamental principles, were evaluated for their extraction efficiency of volatile organic compounds (VOCs) from goat cheese whey wastewater. For this purpose, a sample preparation method based on the headspace-HiSorb technique was developed and evaluated for its efficiency in terms of the amount of extracted compounds and reproducibility of results. Thermal desorption-gas chromatography/mass spectrometry (TD-GC/MS) and GC/MS analytical methods were used to perform the wastewater analysis, respectively. The experimental parameters of HiSorb were evaluated in terms of probe coating, extraction time, stirring speed, sample volume, extraction temperature and salt addition. Under optimal extraction conditions, it was observed that the use of the divinylbenzene/carbon wide range/polydimethylsiloxane (DVB/CWR/PDMS) triple coating for HiSorb and DVB/Carboxen (CAR)/PDMS for SPME, was best suited to extract a broader range of VOCs with higher peak intensities. A total of 34 VOCs were extracted and determined with the DVB/CWR/PDMS HiSorb probe, while only 23 VOCs were determined with the conventional DVB/CAR/PDMS SPME fiber. The DVB/CWR/PDMS HiSorb probe has a higher adsorbent capacity which results in a higher sensitivity for VOCs compared to the DVB/CAR/PDMS SPME fiber. Furthermore, the HiSorb technique exhibits better reproducibility, as indicated by the lower relative standard deviation (RSD) of 3.7% compared to 7.1% for SPME. Therefore, the HiSorb technique is an effective method for detecting VOCs in complex matrices, such as wastewater.

A solar evaporator fabricated from corncob waste for the desalination of seawater and removal of oil/herbicides from contaminated water

Corncob (CC) based solar evaporators were employed to desalinize seawater brought from the Vallarta coast in Mexico. The pure CC produced an evaporation-rate and evaporation-efficiency of 0.63 kg m-2 h-1 and 38.4%, respectively, under natural solar light. Later, the CC was coated with carbonized CC (CCCE evaporator) or was coated with graphene (CCGE evaporator). Those evaporators were used for the desalination of seawater and obtained higher evaporation rates of 1.59-1.67 kg m-2 h-1, and higher evaporation efficiencies of 92-94% (under natural solar light). The desalination experiments were repeated under artificial solar light and the evaporation-rates/evaporation-efficiencies slightly decreased to 1.43-1.52 kg m-2 h-1/88-92%. The surface analysis of the evaporators by FTIR, XPS and Raman revealed that the CCGE evaporator had on its surface a lower content of defects and a higher amount of OH groups than the CCCE evaporator. Therefore, the CCGE evaporator had higher evaporation-rates/evaporation-efficiencies in comparison with the CCCE evaporator. Furthermore, we purified water contaminated with three different herbicides (fomesafen, 2-6 dichlorobenzamide and 4-chlorophenol at 30 ppm) by evaporation and using natural solar light. Interestingly, the CCCE and CCGE evaporators also removed the herbicides by physical adsorption with efficiencies of 12-22.5%. Moreover, the CCGE evaporator removed vegetable oil from contaminated water by adsorption and its maximum adsorption capacity was 1.72 g/g. Overall, our results demonstrated that the corncob-based evaporators studied here are a low-cost alternative to obtain clean water under natural solar light and this one was more effective for the desalination of seawater than the artificial sunlight (Xe lamp).

Dithiocarbamates: Properties, Methodological Approaches and Challenges to Their Control

Dithiocarbamates (DTCs) are a group of chemicals used primarily as fungicides, although they are exploited for various other applications. DTCs represent one of the oldest classes of broad-spectrum fungicides employed worldwide to control fungal diseases on many crops. Due to their ease of synthesis, low production costs (cheap and readily available starting materials) and a fungicidal activity with a multi-site mode of action, they are still among modern agriculture's most extensively used pesticides. Although the environmental degradation in air, water, and soil is relatively rapid due to photolysis and/or hydrolysis, they are among the most frequently detected pesticides in the European Union (EU), also with a high frequency of maximum residue level (MRL) exceedances. The current review aims to comprehensively survey all aspects of DTCs, including the environmental fate, toxicity and analytical methods for determining parental compounds and degradation products in environmental and food samples. Furthermore, the accumulation of carbamate and dithiocarbamate pesticides in vegetables, fruits, bioindicator organisms and human biological samples, as well as their health effects on humans, are also considered in this study.

Simultaneous Screening of 322 Residual Pesticides in Fruits and Vegetables Using GC-MS/MS and Deterministic Health Risk Assessments

The development of efficient methods for evaluating pesticide residues is essential in order to ensure the safety and quality of agricultural products since the Republic of Korea implemented the Positive List System (PLS). The objective of this research was to establish a method for the simultaneous analysis of 322 pesticide residues in fruits and vegetables (such as coffee, potato, corn, and chili pepper), using the quick, easy, cheap, effective, rugged, and safe (QuEChERS) approach in combination with gas chromatography-tandem mass spectrometry (GC-MS/MS). This study introduces a robust, high-throughput GC-MS/MS method for screening the target pesticide residues in agricultural products, achieving the PLS criterion of 0.01 mg/kg LOQ. Despite some compounds not aligning with the CODEX recovery guideline, sufficient reproducibility was confirmed, attesting to the method's applicability in qualitative analyses. A health risk assessment conducted using estimated daily intake/acceptable daily intake ratios indicated low risks associated with product consumption (<0.035391%), thereby confirming their safety. This efficient method holds significant implications for the safe distribution of agricultural products, including during import inspections.

Pesticide pestilence: Global scenario and recent advances in detection and degradation methods

Increased anthropogenic activities are confronted as the main cause for rising environmental and health concerns globally, presenting an indisputable threat to both environment and human well-being. Modern-day industrialization has given rise to a cascade of concurrent environmental and health challenges. The global human population is growing at an alarming rate, posing tremendous pressure on future food security, and healthy and environmentally sustainable diets for all. To feed all, the global food production needs to increase by 50% by 2050, but this increase has to occur from the limited arable land, and under the present-day climate variabilities. Pesticides have become an integral component of contemporary agricultural system, safeguarding crops from pests and diseases and their use must be reduce to fulfill the SDG (Sustainable Development Goals) agenda . However, their indiscriminate use, lengthy half-lives, and high persistence in soil and aquatic ecosystems have impacted global sustainability, overshot the planetary boundaries and damaged the pure sources of life with severe and negative impacts on environmental and human health. Here in this review, we have provided an overview of the background of pesticide use and pollution status and action strategies of top pesticide-using nations. Additionally, we have summarized biosensor-based methodologies for the rapid detection of pesticide residue. Finally, omics-based approaches and their role in pesticide mitigation and sustainable development have been discussed qualitatively. The main aim of this review is to provide the scientific facts for pesticide management and application and to provide a clean, green, and sustainable environment for future generations.

MOF-based composites as photoluminescence sensing platforms for pesticides: Applications and mechanisms

Metal-organic frameworks (MOFs) have recently garnered considerable attention among reticular compounds due to their unique physicochemical properties and applications in sensing toxic compounds. On the other hand, fluorometric sensing has been widely studied for food safety and environmental protection among the various sensing methods. Thus, designing MOF-based fluorescence sensors for specific detection of hazardous compounds, especially pesticides, are incessantly needed to keep up with the continuous demands for monitoring these environmental pollution. Herein, recent MOF-based platforms for pesticide fluorescence detection are deliberated owing to sensors' emission origins and in terms of their structural properties. The influences of different guest incorporation in MOFs on pesticide fluorescence detection are summarized, and the future developments of novel MOF composites such as polyoxometalate@MOFs (POMOF), carbon quantum dots@MOFs (CDs@MOF), and organic dye@MOF are prospected for fluorescence sensing of assorted pesticides with a focus on mechanistic insights of specific detection techniques in food safety and environmental protection.

Recent Advancements in Liquid Chromatographic Techniques to Estimate Pesticide Residues Found in Medicinal Plants around the Globe

In the present review article, different advanced liquid chromatographic techniques and the advanced techniques other than liquid chromatography that are used to estimate the pesticide residues from different plant-based samples are presented. In the beginning of the article, details of pesticides, their health effects and various cell lines used for the related study has been outlined. Afterward, detailed descriptions regarding pesticides classification are inscribed. In the end, recent advancements in the area of analysis of pesticides for herbal drugs are explained. Solid phase micro extraction (SPME) and solid-phase extraction (SPE) are considered as most common method of sample preparation for pesticides and its residual analysis. The most commonly used analytical separation technique for pesticide analysis is liquid chromatography (LC) integrated with mass spectrometry (MS) and MS/MS as Triple Quadrupole Mass Spectrometer (QqQ) for the samples analysis where high level of sensitivity and accuracy is required in quantification.

Toxicity assessment of polyethylene microplastics in combination with a mix of emerging pollutants on Physalaemus cuvieri tadpoles

Studies in recent years have shown that aquatic pollution by microplastics (MPs) can be considered to pose additional stress to amphibian populations. However, our knowledge of how MPs affect amphibians is very rudimentary, and even more limited is our understanding of their effects in combination with other emerging pollutants. Thus, we aimed to evaluate the possible toxicity of polyethylene MPs (PE-MPs) (alone or in combination with a mix of pollutants) on the health of Physalaemus cuvieri tadpoles. After 30 days of exposure, multiple biomarkers were measured, including morphological, biometric, and developmental indices, behavioral parameters, mutagenicity, cytotoxicity, antioxidant and cholinesterase responses, as well as the uptake and accumulation of PE-MPs in animals. Based on the results, there was no significant change in any of the parameters measured in tadpoles exposed to treatments, but induced stress was observed in tadpoles exposed to PE-MPs combined with the mixture of pollutants, reflecting significant changes in physiological and biochemical responses. Through principal component analysis (PCA) and integrated biomarker response (IBR) assessment, effects induced by pollutants in each test group were distinguished, confirming that the exposure of P. cuvieri tadpoles to the PE-MPs in combination with a mix of emerging pollutants induces an enhanced stress response, although the uptake and accumulation of PE-MPs in these animals was reduced. Thus, our study provides new insight into the danger to amphibians of MPs coexisting with other pollutants in aquatic environments.

Glyphosate and Aminomethylphosphonic Acid (AMPA) Modulate Glutathione S-Transferase in Non-Tumorigenic Prostate Cells

Glyphosate (GLY) was developed in the early 1970s and has become the most used broad-spectrum herbicide in the world so far. Its main metabolite is aminomethylphosphonic acid (AMPA), and the accumulation of GLY and its derivative compounds raises some concerns regarding possible health outcomes. In this study, we aimed to evaluate the effects of GLY and AMPA on prostate cell lines by evaluating cell viability, proliferation, gene and protein expression, and cellular pathways involved in the response to oxidative stress. Our results indicated that GLY and AMPA reduced the cell viability of tumorigenic and non-tumorigenic prostate cell lines only at higher concentrations (10 mM GLY and 20 mM AMPA). In contrast, both compounds increased the clonogenicity of non-tumorigenic PNT2 cells, mainly at concentrations below the IC50 (5 mM GLY and 10 mM AMPA). Moreover, treatment of non-tumorigenic cells with low concentrations of GLY or AMPA for 48 h increased GSTM3 expression at both mRNA and protein levels. In contrast, the treatments decrease the GST activity and induced an increase in oxidative stress, mainly at lower concentrations. Therefore, both compounds can cause cellular damage even at lower concentrations in non-tumorigenic PNT2 cells, mainly affecting cell proliferation and oxidative stress.

Passive sampling of diverse pesticides in water by hydrophilic-lipophilic balance sorbent-embedded cellulose acetate membrane: Kinetics, equilibrium partitioning and field application

Pesticides are useful products for agriculture and human life, but they are often released into surface waters and are hazardous to aquatic ecosystems. Pesticides monitoring in surface waters is challenging due to the great variety, ultratrace levels and nonpoint source pollution of pesticides; however, continuous passive sampling may be conducive to solving these problems. This work evaluated the performance of a newly developed passive sampler (hydrophilic-lipophilic balance sorbent-embedded cellulose acetate membrane, HECAM) for six types of currently used/present pesticides. The uptake kinetics and equilibrium partitioning of nineteen pesticides in different dissolved concentrations were studied by dynamic accumulation and equilibrium partitioning experiments, respectively. In the dynamic accumulation experiments, pesticides gradually accumulated in the HECAM and followed a first-order kinetic model. The same type of pesticides had roughly comparable accumulation concentrations. The estimated uptake rate constants ranged from 1.04 to 13.5 L g^-1 d^-1, and sampling rates ranged from 0.02 to 0.31 L d^-1 for the pesticides in the HECAM (size of 2 cm × 3 cm). Pesticide accumulation concentrations in the HECAM increased linearly with increasing dissolved concentrations, which means that varying concentrations can also be monitored by the HECAM. In the equilibrium partitioning experiments, the pesticide partitioning behavior at varying dissolved concentrations can be described by the Freundlich model. The calculated equilibrium partition coefficients (log K_D) for pesticides ranged from 3.32 to 4.54, and different pesticide types showed different changes with log K_ow. Comparable results were found when estimating chemical equilibrium partition coefficients by the dynamic accumulation and equilibrium partitioning methods. Field deployment of the HECAM in river waters resulted in the detection of four pesticides, and the measured results were comparable to those of active sampling coupled with liquid-liquid extraction. These results suggest that the HECAM would be a promising strategy for simultaneously monitoring diverse pesticides in waters.

The Application of Polymer Inclusion Membranes for the Removal of Emerging Contaminants and Synthetic Dyes from Aqueous Solutions-A Mini Review

Pollution of the environment, including water resources, is currently one of the greatest challenges due to emerging new contaminants of anthropogenic origin. Of particular concern are emerging organic pollutants such as pharmaceuticals, endocrine disruptors, and pesticides, but also other industrial pollutants, for example, synthetic dyes. The growing demand for environmentally friendly and economical methods of removing emerging contaminants and synthetic dyes from wastewater resulted in increased interest in the possibility of using techniques based on the application of polymer inclusion membranes (PIMs) for this purpose. PIM-based techniques are promising methods for eliminating emerging contaminants and synthetic dyes from aqueous solutions, including wastewater, due to high efficiency, membranes versatility, ease/low cost of preparation, and high selectivity. This review describes the latest developments related to the removal of various emerging contaminants and synthetic dyes from aqueous solutions using PIMs over the past few years, with particular emphasis on research aimed at increasing the effectiveness and selectivity of PIMs, which may contribute to wider use of these methods in the future.

A new on-line SPE LC-HRMS method for simultaneous analysis of selected emerging contaminants in surface waters

In recent years emerging contaminants (ECs) have received significant attention due to their widespread detection in surface waters and concerns that these compounds can cause adverse ecological and/or human health effects. Therefore, accurate methods for determining and quantifying ECs in surface water are essential for estimating their environmental impact. This work describes the development, validation and application of a sensitive multiclass method for simultaneous determination of 22 per and polyfluorinated alkyl substances (PFASs), 3 pharmaceuticals, 15 pesticides, and 2 bisphenols in surface water using on-line solid phase extraction (SPE) coupled with ultra-performance liquid chromatography-high-resolution mass spectrometry (UPLC-HRMS). The method allows simultaneous sample clean-up from interfering matrices and lower limits of detection (LODs) by injecting a large sample volume into the LC system without compromising chromatographic efficiency and resolution. Linearity of response over several orders of magnitude was demonstrated for all tested compounds (R2 > 0.99), with the LODs ranging from 0.8 and 33.7 pg mL-1, allowing detection of ECs at trace levels in surface water. The method showed acceptable accuracy and precision (CV, % and RE below 20%) for all tested ECs. It also provided recoveries between 60% and 130% for all tested ECs. The validated method was successfully applied for analysis of surface water samples from three rivers (Cam, Ouse and Thames) in England. Several ECs, including perfluorooctanesulfonic acid (PFOS), perfluorobutanesulfonic acid (PFBS), perfluorohexanoic acid (PFHxA), perfluorohexane sulfonic acid (PFHxS), dimethyl-metatoluamide (DEET) and ibuprofen were observed in analysed surface water above the method's limit of quantitation (LOQ), with concentrations ranging between 3.5 and 460 pg mL-1.

Utilization of a Novel Immunofluorescence Instrument Prototype for the Determination of the Herbicide Glyphosate

An enzyme-linked fluorescent immunoassay (ELFIA) method has been developed for the quantitative analytical determination of the herbicide active ingredient glyphosate in environmental matrices (surface water, soil, and plant tissues). Glyphosate, as a ubiquitous agricultural pollutant, is a xenobiotic substance with exposure in aquatic and terrestrial ecosystems due its extremely high worldwide application rate. The immunoassay developed in Project Aquafluosense is part of a fluorescence-based instrumentation setup for the in situ determination of several characteristic water quality parameters. The 96-well microplate-based competitive immunoassay method applies fluorescence signal detection in the concentration range of 0–100 ng/mL glyphosate. Application of the fluorescent signal provides a limit of detection of 0.09 ng/mL, which is 2.5-fold lower than that obtained with a visual absorbance signal. Beside the improved limit of detection, determination by fluorescence provided a wider and steeper dynamic range for glyphosate detection. No matrix effect appeared for the undiluted surface water samples, while plant tissues and soil samples required dilution rates of 1:10 and 1:100, respectively. No cross-reaction was determined with the main metabolite of glyphosate, N-aminomethylphosphonic acid, and related compounds.

Insecticide Resistance in Alabama Populations of the Mosquito Aedes albopictus

The insecticide sensitivity and resistance status of both adults and larvae from six Aedes albopictus samples collected in Tuskegee, Tuscaloosa, Birmingham, Dothan, Mobile, and Montgomery, Alabama, were evaluated for the levels of sensitivity and resistance to eight insecticides: β-cyfluthrin, chlorpyrifos, deltamethrin, etofenprox, fenitrothion, permethrin, resmethrin, and malathion. Adult Ae. albopictus from all locations showed similar results for the difference between the time to 100% mortality and the diagnostic time in the CDC bottle bioassay, although Ae. albopictus survive longer than the diagnostic time to permethrin, fenitrothion, and resmethrin treatments. The larval bioassay indicated that malathion was the least toxic to Ae. albopictus from all locations (LC50: ranging from 0.1 ppm to 1.2 ppm), followed by resmethrin and etofenprox (LC50: 0.05 ppm-0.4 ppm), and deltamethrin and fenitrothion (LC50: 0.01 ppm-0.06 ppm). Chlorpyrifos exhibited the highest larval toxicity (LC50: 0.003 ppm-0.05 ppm). The resistance status of Ae. albopictus from all six locations was similar to the resistance levels found in a previous survey in 2004, indicating that in Alabama the development of resistance is slow in this strain, although comparing the resistance of Ae. albopictus from Tuskegee to that of a susceptible strain showed that it is resistant to chlorpyrifos. The slopes of the dose-response curves to most of the insecticides tested for these field populations of Ae. albopictus were generally similar to or slightly higher than those measured eighteen years previously, indicating that these populations are relatively homozygous in response to all the insecticides tested.

Toxicity evaluation of the combination of emerging pollutants with polyethylene microplastics in zebrafish: Perspective study of genotoxicity, mutagenicity, and redox unbalance

Despite the toxicity of microplastics (MPs) in freshwater fish has been demonstrated in previous studies, their effects when mixed with other pollutants (organic and inorganic) are poorly understood. Thus, we aimed to test the hypothesis that the association of polyethylene MPs (PE-MPs) to a mix of emerging pollutants induces more adverse genotoxic, mutagenic, and redox unbalance effects in adult zebrafish (Danio rerio), after 15 days of exposure. Although the accumulation of MPs in animals was greater in animals exposed to PE-MPs alone, erythrocyte DNA damage (comet assay) and the frequency of erythrocytic nuclear abnormalities (ENAs) evidenced in zebrafish exposed to PE-MPs alone were as pronounced as those observed in animals exposed to the mix of pollutant (alone or in combination with MPs), which constitutes the big picture of the current study. Moreover, we noticed that such effects were associated with an imbalance between pro-and antioxidant metabolism in animals, whose activity of superoxide dismutase (SOD) and catalase (CAT) was assessed in different organs which were not sufficient to counterbalance the production of reactive oxygen species [hydrogen peroxide (H₂O₂)] and nitrogen [nitric oxide (NO)] evaluated. The principal component analysis (PCA) also revealed that while the antioxidant activity was more pronounced in the brain and liver of animals, the highest production of H₂O₂ was perceived in the gills and muscles, suggesting that the biochemical response of the animals was organ-dependent. Thus, the present study did not demonstrate antagonistic, synergistic, or additive effects on animals exposed to the combination between PE-MPs and a mix of pollutants in the zebrafish, which reinforces the theory that interactions between pollutants in aquatic ecosystems may be as complex as their effects on freshwater ichthyofauna.

Development of a UHPLC-MS/MS method to enhance the detection of Glyphosate, AMPA and Glufosinate at sub-microgram / L levels in water samples

Glyphosate is the best-selling herbicide worldwide. The toxicity on ecosystems and the possible effects on human health have long been at the centre of a complex controversy concerning the authorisation for its use. The peculiar chemical-physical properties of glyphosate, AMPA and glufosinate make their determination at trace levels in the water a real analytical challenge. All three compounds can be derivatised to less polar ones and FMOC-Cl (9-fluorenylmethyl chloroformate) is the most common pre-column derivatisation reagent used for this analysis. It can be successfully combined with Ultra-High-Performance Liquid Chromatography with Mass Spectrometry (UHPLC-MS/MS) to determine all three analytes in one method as part of water monitoring programs. The developed method aims to determine glyphosate with AMPA and glufosinate at sub-micrograms/L levels in groundwater, surface and water by UHPLC-MS/MS after derivatisation with FMOC-Cl. The novelty of this method is its high simplicity, robustness and sensitivity allowing the identification and quantification of the compounds at the detection limits required by the European regulations (0.1 µg /L). No pre-concentration or purification steps (by using Solid Phase Extraction cartridges) are necessary for our method saving time and consumables costs. The method demonstrated an excellent linear relationship (R2 ≥ 0.999) in the concentration range from 0.025 to 10 µg /L for glyphosate and AMPA and 0.025 to 5 µg /L for glufosinate. The method Limit Of Quantification (LOQ) is 0.025 µg/L, the lowest among all previously published studies, and it was demonstrated according to the European SANTE guidelines.

Use of Passive and Grab Sampling and High-Resolution Mass Spectrometry for Non-Targeted Analysis of Emerging Contaminants and Their Semi-Quantification in Water

Different groups of organic micropollutants including pharmaceuticals and pesticides have emerged in the environment in the last years, resulting in a rise in environmental and human health risks. In order to face up and evaluate these risks, there is an increasing need to assess their occurrence in the environment. Therefore, many studies in the past couple of decades were focused on the improvements in organic micropollutants’ extraction efficiency from the different environmental matrices, as well as their mass spectrometry detection parameters and acquisition modes. This paper presents different sampling methodologies and high-resolution mass spectrometry-based non-target screening workflows for the identification of pharmaceuticals, pesticides, and their transformation products in different kinds of water (domestic wastewater and river water). Identification confidence was increased including retention time prediction in the workflow. The applied methodology, using a passive sampling technique, allowed for the identification of 85 and 47 contaminants in the wastewater effluent and river water, respectively. Finally, contaminants’ prioritization was performed through semi-quantification in grab samples as a fundamental step for monitoring schemes.

Biomonitoring of Soil Contaminated with Herbicides

The state of environmental pollution is of random character, and it depends on climatic conditions, landforms, development and industrialization. It is estimated that in the last decade as many pollutants have been released into the environment as in the previous 70 years, and the pollution rate still increases. Many scientific reports indicate that, in addition to metals, pesticides are the most commonly detected compounds in the environment. This situation is mainly due to the irrational use of these chemicals by humans. Mostly, soil environment changes caused by the influence of pesticides can be determined by various chemical analyses, which require the use of sophisticated and expensive equipment. However, biological methods, such as those using microbiological activity and an abundance of microorganisms, e.g., organisms responsible for the cycle of organic matter and nutrients, tend to be neglected. For this reason, the aim of the present study is not only to assess the validity of other research studies that were performed based on the available literature but to compile methods and compare them, which allows for an in depth understanding of the complexity of soil processes following herbicide application by conducting comprehensive soil biomonitoring.

An Alternative Strategy for Screening and Confirmation of 330 Pesticides in Ground- and Surface Water Using Liquid Chromatography Tandem Mass Spectrometry

The presence of pesticide residues in water is a huge worldwide concern. In this paper we described the development and validation of a new liquid chromatography tandem mass spectrometric (LC-MS/MS) method for both screening and quantification of pesticides in water samples. In the sample preparation stage, the samples were buffered to pH 7.0 and pre-concentrated on polymeric-based cartridges via solid-phase extraction (SPE). Highly sensitive detection was carried out with mobile phases containing only 5 mM ammonium formate (pH of 6.8) as an eluent additive and using only positive ionization mode in MS/MS instrument. Hence, only 200-fold sample enrichment was required to set a screening detection limit (SDL) and reporting limit (RL) of 10 ng/L. The confirmatory method was validated at 10 and 100 ng/L spiking levels. The apparent recoveries obtained from the matrix-matched calibration (5–500 ng/L) were within the acceptable range (60–120%), also the precision (relative standard deviation, RSD) was not higher than 20%. During the development, 480 pesticides were tested and 330 compounds fulfilled the requirements of validation. The method was successfully applied to proficiency test samples to evaluate its accuracy. Moreover, the method robustness test was carried out using higher sample volume (500 mL) followed by automated SPE enrichment. Finally, the method was used to analyze 20 real samples, in which some compounds were detected around 10 ng/L, but never exceeded the assay maximum level.

Method development, validation, monitoring, seasonal effect and risk assessment of multiclass multi pesticide residues in surface and ground water of new alluvial zone in eastern India

A liquid-liquid extraction (LLE) method was validated as per SANTE/12682/2019 guidelines for gas chromatography-mass spectrometric (GC-MS) determination of thirty-six multiclass pesticides in environmental waters. Seasonal (summer, monsoon, and winter) effects on the magnitude of pesticide residues in environmental water (river, pond, and tube well) of six different urban areas of Nadia and North 24 Parganas districts (New alluvial zone, Eastern India) was monitored for subsequent risk assessment. Total 288 water samples (96 each of river, pond, and tube-well) irrespective of locations and seasons were monitored for multiclass multi pesticide residues during the experiment. Each sample (750 mL) was extracted with ethyl acetate/dichloromethane (8:2) liquid-liquid partitioning and filtration (0.22 μm nylon filter paper) and total residue was reconstituted in acetone (1 mL) for GC-MS analysis with developed and validated method resulting satisfactory recovery percentages (77.84-118.15%). The maximum no. of organochlorine (OC) and organophosphorus (OP) pesticide residues were dominated in river and pond water irrespective of seasons and monitoring sites. About 74% of river water samples were found to be contaminated with concerned pesticides in variable magnitudes. Monsoon (July to October) season was highly alarming with the highest presence of total pesticide residues in different types of environmental waters. Risk quotient (RQ) [acute and chronic] was also evaluated in pond and river water as sometimes used for drinking purposes. RQ value (5900) of total endosulfan indicates the highest risk of chronic toxicity to river fishes. Seven water samples from tube-wells were also monitored and found to be contaminated with butachlor and chlorpyriphos in non-significant amounts (< 0.1 ng mL^-1), irrespective of seasons and sites, thus safe for consumption.

Occurrence of Pharmaceutical and Pesticide Transformation Products in Freshwater: Update on Environmental Levels, Toxicological Information and Future Challenges

Pharmaceuticals and pesticides are recognized micropollutants in freshwater systems. Their ever-increasing frequency of detection, levels found and little information available about their effects on non-target organisms, make them emerging contaminants. However, parental compounds are not the only substances of concern. Their metabolites and degradation products, hereby referred to as transformation products, are increasingly detected in freshwater samples and wastewater effluents. In the past years, a wealth of publications provided concentration levels detected in freshwater and some toxicological data, which required critical systematization. This review identified concentrations for 190 transformation products (92 from pesticides and 98 from pharmaceuticals) in water bodies and wastewater effluents. A concentration heatmap was produced to easily spot the substances found at higher levels and plan future research. The very limited available toxicological data link exposure to transformation products to adverse outcomes in humans (genotoxicity and alteration in detoxification processes) and aquatic species (mostly related to apical endpoints). Overall, environmental levels of these transformation products may pose a severe threat to aquatic organisms and need to be further investigated in sound experimental designs, testing for the effects of the single substances as well as of their mixtures. Such toxicological information is highly needed to improve both water treatment technologies and monitoring programmes.