Affinity improvement of a VEGF aptamer by in silico maturation for a sensitive VEGF-detection system

Development of DNA aptamers universally bound to single-chain fragment variables and their applications in bioprocess monitoring

Single-chain fragment variables (scFvs), composed of variable heavy and light chains joined together by a peptide linker, can be produced using a cost-effective bacterial expression system, making them promising candidates for pharmaceutical applications. However, a versatile method for monitoring recombinant-protein production has not yet been developed. Herein, we report a novel anti-scFv aptamer-based biosensing system with high specificity and versatility. First, anti-scFv aptamers were screened using the competitive systematic evolution of ligands by exponential enrichment, focusing on a unique scFv-specific peptide linker. We selected two aptamers, P1-12 and P2-63, with KD = 2.1 μM or KD = 1.6 μM toward anti-human epidermal growth factor receptor (EGFR) scFv, respectively. These two aptamers can selectively bind to scFv but not to anti-EGFR Fv. Furthermore, the selected aptamers recognized various scFvs with different CDRs, such as anti-4-1BB and anti-hemoglobin scFv, indicating that they recognized a unique peptide linker region. An electrochemical sensor for anti-EGFR scFv was developed using anti-scFv aptamers based on square wave voltammetry. Thus, the constructed sensor could monitor anti-EGFR scFv concentrations in the range of 10-500 nM in a diluted medium for bacterial cultivation, which covered the expected concentration range for the recombinant production of scFvs. These achievements promise the realization of continuous monitoring sensors for pharmaceutical scFv, which will enable the real-time and versatile monitoring of large-scale scFv production.

Plug-and-play protein biosensors using aptamer-regulated in vitro transcription

Molecular biosensors that accurately measure protein concentrations without external equipment are critical for solving numerous problems in diagnostics and therapeutics. Modularly transducing the binding of protein antibodies, protein switches or aptamers into a useful output remains challenging. Here, we develop a biosensing platform based on aptamer-regulated transcription in which aptamers integrated into transcription templates serve as inputs to molecular circuits that can be programmed to a produce a variety of responses. We modularly design molecular biosensors using this platform by swapping aptamer domains for specific proteins and downstream domains that encode different RNA transcripts. By coupling aptamer-regulated transcription with diverse transduction circuits, we rapidly construct analog protein biosensors and digital protein biosensors with detection ranges that can be tuned over two orders of magnitude and can exceed the binding affinity of the aptamer. Aptamer-regulated transcription is a straightforward and inexpensive approach for constructing programmable protein biosensors that could have diverse applications in research and biotechnology.

DNA-modified Prussian blue nanozymes for enhanced electrochemical biosensing

Prussian blue nanoparticles exhibit the potential to be employed in bioanalytical applications due to their robust stability, peroxidase-like catalytic functionality, straightforward synthesis, and biocompatibility. An efficient approach is presented for the synthesis of nucleic acid-modified Prussian blue nanoparticles (DNA-PBNPs), utilizing nanoparticle porosity to adsorb nucleic acids (polyT). This strategic adsorption leads to the exposure of nucleic acid sequences on the particle surface while retaining catalytic activity. DNA-PBNPs further couple with functional nucleic acid sequences and aptamers through complementary base pairing to act as transducers in biosensors and amplify signal acquisition. Subsequently, we integrated a copper ion-dependent DNAzyme (Cu2+-DNAzyme) and a vascular endothelial growth factor aptamer (VEGF aptamer) onto screen-printed electrodes to serve as recognition elements for analytes. Significantly, our approach leverages DNA-PBNPs as a superior alternative to traditional enzyme-linked antibodies in electrochemical biosensors, thereby enhancing both the efficiency and adaptability of these devices. Our study conclusively demonstrates the application of DNA-PBNPs in two different biosensing paradigms: the sensitive detection of copper ions and vascular endothelial growth factor (VEGF). These results indicate the promising potential of DNA-modified Prussian blue nanoparticles in advancing bioanalytical sensing technologies.

An Ensemble Docking Approach for Analyzing and Designing Aptamer Heterodimers Targeting VEGF165

Vascular endothelial growth factor 165 (VEGF165) is a prominent isoform of the VEGF-A protein that plays a crucial role in various angiogenesis-related diseases. It is homodimeric, and each of its monomers is composed of two domains connected by a flexible linker. DNA aptamers, which have emerged as potent therapeutic molecules for many proteins with high specificity and affinity, can also work for VEGF165. A DNA aptamer heterodimer composed of monomers of V7t1 and del5-1 connected by a flexible linker (V7t1:del5-1) exhibits a greater binding affinity with VEGF165 compared to either of the two monomers alone. Although the structure of the complex formed between the aptamer heterodimer and VEGF165 is unknown due to the highly flexible linkers, gaining structural information will still be valuable for future developments. Toward this end of accessing structural information, we adopt an ensemble docking approach here. We first obtain an ensemble of structures for both VEGF165 and the aptamer heterodimer by considering both small- and large-scale motions. We then proceed through an extraction process based on ensemble docking, molecular dynamics simulations, and binding free energy calculations to predict the structures of the VEGF165/V7t1:del5-1 complex. Through the same procedures, we reach a new aptamer heterodimer that bears a locked nucleic acid-modified counterpart of V7t1, namely RNV66:del5-1, which also binds well with VEGF165. We apply the same protocol to the monomeric units V7t1, RNV66, and del5-1 to target VEGF165. We observe that V7t1:del5-1 and RNV66:del5-1 show higher binding affinities with VEGF165 than any of the monomers, consistent with experiments that support the notion that aptamer heterodimers are more effective anti-VEGF165 aptamers than monomeric aptamers. Among the five different aptamers studied here, the newly designed RNV66:del5-1 shows the highest binding affinity with VEGF165. We expect that our ensemble docking approach can help in de novo designs of homo/heterodimeric anti-angiogenic drugs to target the homodimeric VEGF165.

Aptamer-enhanced particle aggregation inhibition assay for simple homogeneous protein detection using DNA aptamer and thermo-responsive magnetic nanoparticles

A simple and sensitive homogeneous protein detection system is required for the early detection of biomarkers. Thermo-responsive magnetic particles (TM) have already been developed to achieve easy bound/free separation at the homogeneous protein detection system, but they are still limited owing to the requirement of secondary antibodies and negatively charged polymers, and it is challenging to control the TM aggregation behavior because of the size of the TM. Therefore, at new method to control TM aggregation behavior that is simple, easy, and highly sensitive is required. In this study, we developed a DNA aptamer-based TM assay as a simple protein detection system without additional secondary molecular recognition elements or negatively charged polymer. In the first attempt, a DNA aptamer was modified on the TM surface, and its aggregation behavior was monitored depending on the target molecule concentration. The TM aggregation rate during the heating process decreased depending on the amount of the DNA aptamer and increased depending on the target protein level. This suggests that the DNA aptamer prevented TM aggregation owing to its negative charge and achieved target protein detection owing to the cancellation of repulsion. Capturable aptamers were used in the TM assay to improve the sensitivity and limit of detection. The designed Capture DNA was modified on the TM surface, and the aptamer was captured in the presence of the target protein through a conformational change. Eventually, Capturable aptamer-based TM assay achieved a sub-nanomolar limit of detection and higher sensitivity than that of our initial investigation. Through this study and the ease of the DNA aptamer design, it was shown that the DNA aptamer-modified TM assay enabled the development of a simple and sensitive homogeneous protein detection system.

Plug-and-play protein biosensors using aptamer-regulated in vitro transcription

Molecular biosensors that accurately measure protein concentrations without external equipment are critical for solving numerous problems in diagnostics and therapeutics. Modularly transducing the binding of protein antibodies, protein switches or aptamers into a useful output remains challenging. Here, we develop a biosensing platform based on aptamer-regulated transcription in which aptamers integrated into transcription templates serve as inputs to molecular circuits that can be programmed to a produce a variety of responses. We modularly design molecular biosensors using this platform by swapping aptamer domains for specific proteins and downstream domains that encode different RNA transcripts. By coupling aptamer-regulated transcription with diverse transduction circuits, we rapidly construct analog protein biosensors or digital protein biosensors with detection ranges that can be tuned over two orders of magnitude. Aptamer-regulated transcription is a straightforward and inexpensive approach for constructing programmable protein biosensors suitable for diverse research and diagnostic applications.

Improving aptamer performance: key factors and strategies

Aptamers are functional single-stranded oligonucleotide fragments isolated from randomized libraries by Systematic Evolution of Ligands by Exponential Enrichment (SELEX), exhibiting excellent affinity and specificity toward targets. Compared with traditional antibody reagents, aptamers display many desirable properties, such as low variation and high flexibility, and they are suitable for artificial and large-scale synthesis. These advantages make aptamers have a broad application potential ranging from biosensors, bioimaging to therapeutics and other areas of application. However, the overall performance of aptamer pre-selected by SELEX screening is far from being satisfactory. To improve aptamer performance and applicability, various post-SELEX optimization methods have been developed in the last decade. In this review, we first discuss the key factors that influence the performance or properties of aptamers, and then we summarize the key strategies of post-SELEX optimization which have been successfully used to improve aptamer performance, such as truncation, extension, mutagenesis and modification, splitting, and multivalent integration. This review shall provide a comprehensive summary and discussion of post-SELEX optimization methods developed in recent years. Moreover, by discussing the mechanism of each approach, we highlight the importance of choosing the proper method to perform post-SELEX optimization.

Aptamers Versus Vascular Endothelial Growth Factor (VEGF): A New Battle against Ovarian Cancer

Cancer is one of the diseases that causes a high mortality as it involves unregulated and abnormal cell growth proliferation that can manifest in any body region. One of the typical ovarian cancer symptoms is damage to the female reproductive system. The death rate can be reduced through early detection of the ovarian cancer. Promising probes that can detect ovarian cancer are suitable aptamers. Aptamers, i.e., so-called chemical antibodies, have a strong affinity for the target biomarker and can typically be identified starting from a random library of oligonucleotides. Compared with other probes, ovarian cancer targeting using aptamers has demonstrated superior detection effectiveness. Various aptamers have been selected to detect the ovarian tumor biomarker, vascular endothelial growth factor (VEGF). The present review highlights the development of particular aptamers that target VEGF and detect ovarian cancer at its earliest stages. The therapeutic efficacy of aptamers in ovarian cancer treatment is also discussed.

Optimization of an aptamer against Prorocentrum minimum - A common harmful algae by truncation and G-quadruplex-forming mutation

Harmful algal blooms (HABs) caused by Prorocentrum minimum have seriously posed economic losses and ecological disasters. To reduce these losses, aptamers are used as a new molecular probe to establish rapid methods. Herein, to improve the affinity and application of aptamers in the detection of harmful algae, the optimization was performed on the previously reported aptamers against P. minimum. First, a total of seven candidate aptamers, including three truncated aptamers (TA1, TA2 and TA3) and four mutant aptamers (MA1, MA2, MA3 and MA4), were obtained by truncation and G-quadruplex (GQ)-forming mutation. Next, the specificity and affinity test by flow cytometry revealed that except for TA1 and TA2, all of the candidate aptamers are specific with the equilibrium dissociation constant of (40.4 ± 5.5) nM for TA3, (63.3 ± 24.0) nM for MA1, (71.7 ± 14.6) nM for MA2, (365.9 ± 74.4) nM for MA3, and (21.1 ± 0.5) nM for MA4, respectively. The circular dichroism analysis of the mutant aptamers demonstrated that the GQ structures formed by MA1/MA2, MA3 and MA4 were antiparallel, mixed parallel and parallel, respectively. The affinity of aptamers with various GQ is in the order of parallel structure > antiparallel structure > mixed parallel structure. In addition, to further improve binding ability, the binding conditions of MA4 were optimized as follows: binding time, 60 min; binding temperature, 37 °C; pH of the binding buffer, 7.5; and Na⁺/Mg²⁺ concentration in the binding buffer, 100 mM/0.5 mM. The binding examination by fluorescence microscopy showed that MA4 had a stronger binding ability to P. minimum than the original aptamer. Taken together, this study not only obtained an aptamer with higher affinity than the original aptamer, which laid a good foundation for subsequent application, but also may provide a feasible reference method for aptamer optimization.

Design and Prediction of Aptamers Assisted by In Silico Methods

An aptamer is a single-stranded DNA or RNA that binds to a specific target with high binding affinity. Aptamers are developed through the process of systematic evolution of ligands by exponential enrichment (SELEX), which is repeated to increase the binding power and specificity. However, the SELEX process is time-consuming, and the characterization of aptamer candidates selected through it requires additional effort. Here, we describe in silico methods in order to suggest the most efficient way to develop aptamers and minimize the laborious effort required to screen and optimise aptamers. We investigated several methods for the estimation of aptamer-target molecule binding through conformational structure prediction, molecular docking, and molecular dynamic simulation. In addition, examples of machine learning and deep learning technologies used to predict the binding of targets and ligands in the development of new drugs are introduced. This review will be helpful in the development and application of in silico aptamer screening and characterization.

Gene therapy to enhance angiogenesis in chronic wounds

Skin injuries and chronic non-healing wounds are one of the major global burdens on the healthcare systems worldwide due to their difficult-to-treat nature, associated co-morbidities, and high health care costs. Angiogenesis has a pivotal role in the wound-healing process, which becomes impaired in many chronic non-healing wounds, leading to several healing disorders and complications. Therefore, induction or promotion of angiogenesis can be considered a promising approach for healing of chronic wounds. Gene therapy is one of the most promising upcoming strategies for the treatment of chronic wounds. It can be classified into three main approaches: gene augmentation, gene silencing, and gene editing. Despite the increasing number of encouraging results obtained using nucleic acids (NAs) as active pharmaceutical ingredients of gene therapy, efficient delivery of NAs to their site of action (cytoplasm or nucleus) remains a key challenge. Selection of the right therapeutic cargo and delivery methods is crucial for a favorable prognosis of the healing process. This article presents an overview of gene therapy and non-viral delivery methods for angiogenesis induction in chronic wounds.

Biological aspects in controlling angiogenesis: current progress

All living beings continue their life by receiving energy and by excreting waste products. In animals, the arteries are the pathways of these transfers to the cells. Angiogenesis, the formation of the arteries by the development of pre-existed parental blood vessels, is a phenomenon that occurs naturally during puberty due to certain physiological processes such as menstruation, wound healing, or the adaptation of athletes' bodies during exercise. Nonetheless, the same life-giving process also occurs frequently in some patients and, conversely, occurs slowly in some physiological problems, such as cancer and diabetes, so inhibiting angiogenesis has been considered to be one of the important strategies to fight these diseases. Accordingly, in tissue engineering and regenerative medicine, the highly controlled process of angiogenesis is very important in tissue repairing. Excessive angiogenesis can promote tumor progression and lack of enough angiogensis can hinder tissue repair. Thereby, both excessive and deficient angiogenesis can be problematic, this review article introduces and describes the types of factors involved in controlling angiogenesis. Considering all of the existing strategies, we will try to lay out the latest knowledge that deals with stimulating/inhibiting the angiogenesis. At the end of the article, owing to the early-reviewed mechanical aspects that overshadow angiogenesis, the strategies of angiogenesis in tissue engineering will be discussed.

Angiogenic Aptamer-Modified Tetrahedral Framework Nucleic Acid Promotes Angiogenesis In Vitro and In Vivo

In a search for a solution to large-area soft and hard tissue defects, whether or not tissue regeneration or tissue-substitutes transplantation is used, the problems with angiogenesis need to be solved urgently. Thus, a new and efficient proangiogenic approach is needed. Nanoengineering systems have been considered one of the most promising approaches. In this study, we modify the tetrahedral framework nucleic acid (tFNA) for the first time with two different angiogenic DNA aptamers to form aptamer-tFNA nanostructures, tFNA-Apt02 and tFNA-AptVEGF, and the effects of them on angiogenesis both in vitro and in vivo are investigated. We develop new nanomaterials for enhancing angiogenesis to solve the problem of tissue engineering vascularization and ischemic diseases. The results of our study confirm that tFNA-Apt02 and tFNA-AptVEGF has a stronger ability to accelerate endothelial cell proliferation and migration, tubule formation, spheroid sprouting, and angiogenesis in vivo. We first demonstrate that the engineered novel tFNA-Apt02 and tFNA-AptVEGF have promoting effects on angiogenesis both in vitro and in vivo and provide a theoretical basis and opportunity for their application in tissues engineering vascularization and ischemic diseases.

Single-Round DNA Aptamer Selection by Combined Use of Capillary Electrophoresis and Next Generation Sequencing: An Aptaomics Approach for Identifying Unique Functional Protein-Binding DNA Aptamers

In DNA aptamer selection, existing methods do not discriminate aptamer sequences based on their binding affinity and function and the reproducibility of the selection is often poor, even for the selection of well-known aptamers like those that bind the commonly used model protein thrombin. In the present study, a novel single-round selection method (SR-CE selection) was developed by combining capillary electrophoresis (CE) with next generation sequencing. Using SR-CE selection, a successful semi-quantitative and semi-comprehensive aptamer selection for thrombin was demonstrated with high reproducibility for the first time. Selection rules based on dissociation equilibria and kinetics were devised to obtain families of analogous sequences. Selected sequences of the same family were shown to bind thrombin with high affinity. Furthermore, data acquired from SR-CE selection was mined by creating sub-libraries that were categorized by the functionality of the aptamers (e. g., pre-organized aptamers versus structure-induced aptamers). Using this approach, a novel fluorescent molecular recognition sensor for thrombin with nanomolar detection limits was discovered. Thus, in this proof-of-concept report, we have demonstrated the potential of a "DNA Aptaomics" approach to systematically design functional aptamers as well as to obtain high affinity aptamers.

Accelerating Post-SELEX Aptamer Engineering Using Exonuclease Digestion

The systematic evolution of ligands by exponential enrichment (SELEX) process enables the isolation of aptamers from random oligonucleotide libraries. However, it is generally difficult to identify the best aptamer from the resulting sequences, and the selected aptamers often exhibit suboptimal affinity and specificity. Post-SELEX aptamer engineering can improve aptamer performance, but current methods exhibit inherent bias and variable rates of success or require specialized instruments. Here, we describe a generalizable method that utilizes exonuclease III and exonuclease I to interrogate the binding properties of small-molecule-binding aptamers in a rapid, label-free assay. By analyzing an ochratoxin-binding DNA aptamer and six of its mutants, we determined that ligand binding alters the exonuclease digestion kinetics to an extent that closely correlates with the aptamer's ligand affinity. We then utilized this assay to enhance the binding characteristics of a DNA aptamer which binds indiscriminately to ATP, ADP, AMP, and adenosine. We screened 13 mutants derived from this aptamer against all these analogues and identified two new high-affinity aptamers that solely bind to adenosine. We incorporated these two aptamers directly into an electrochemical aptamer-based sensor, which achieved a detection limit of 1 μM adenosine in 50% serum. We also confirmed the generality of our method to characterize target-binding affinities of protein-binding aptamers. We believe our approach is generalizable for DNA aptamers regardless of sequence, structure, and length and could be readily adapted into an automated format for high-throughput engineering of small-molecule-binding aptamers to acquire those with improved binding properties suitable for various applications.

SELEX-based DNA Aptamer Selection: A Perspective from the Advancement of Separation Techniques

DNA aptamers, which are short, single-stranded DNA sequences that selectively bind to target substances (proteins, cells, small molecules, metal ions), can be acquired by means of the systematic evolution of ligands by exponential enrichment (SELEX) methodology. In the SELEX procedure, one of the keys for the effective acquisition of high-affinity and functional aptamer sequences is the separation stage to isolate target-bound DNA from unbound DNA in a randomized DNA library. In this review, various remarkable advancements in separation techniques for SELEX-based aptamer selection developed in this decade, are described and discussed, including CE-, microfluidic chip-, solid phase-, and FACS-based SELEX along with other methods.

Dimeric and Multimeric DNA Aptamers for Highly Effective Protein Recognition

Multivalent interactions frequently occur in biological systems and typically provide higher binding affinity and selectivity in target recognition than when only monovalent interactions are operative. Thus, taking inspiration by nature, bivalent or multivalent nucleic acid aptamers recognizing a specific biological target have been extensively studied in the last decades. Indeed, oligonucleotide-based aptamers are suitable building blocks for the development of highly efficient multivalent systems since they can be easily modified and assembled exploiting proper connecting linkers of different nature. Thus, substantial research efforts have been put in the construction of dimeric/multimeric versions of effective aptamers with various degrees of success in target binding affinity or therapeutic activity enhancement. The present review summarizes recent advances in the design and development of dimeric and multimeric DNA-based aptamers, including those forming G-quadruplex (G4) structures, recognizing different key proteins in relevant pathological processes. Most of the designed constructs have shown improved performance in terms of binding affinity or therapeutic activity as anti-inflammatory, antiviral, anticoagulant, and anticancer agents and their number is certainly bound to grow in the next future.

In silico molecular docking in DNA aptamer development

Aptamers are single-stranded DNA or RNA oligonucleotides generated by SELEX that exhibit binding affinity and specificity against a wide variety of target molecules. Compared to RNA aptamers, DNA aptamers are much more stable and therefore are widely adopted in a number of applications especially in diagnostics. The tediousness and rigor associated with certain steps of the SELEX intensify the efforts to adopt in silico molecular docking approaches together with in vitro SELEX procedures in developing DNA aptamers. Inspired by these endeavors, we carry out an overview of the in silico molecular docking approaches in DNA aptamer generation, by detailing the stepwise procedures as well as shedding some light on the various softwares used. The in silico maturation strategy and the limitations of the in silico approaches are also underscored.

Anti-VEGF DNA-based aptamers in cancer therapeutics and diagnostics

The vascular endothelial growth factor (VEGF) family and its receptors play fundamental roles not only in physiological but also in pathological angiogenesis, characteristic of cancer progression. Aiming at finding putative treatments for several malignancies, various small molecules, antibodies, or protein-based drugs have been evaluated in vitro and in vivo as VEGF inhibitors, providing efficient agents approved for clinical use. Due to the high clinical importance of VEGF, also a great number of anti-VEGF nucleic acid-based aptamers-that is, oligonucleotides able to bind with high affinity and specificity a selected biological target-have been developed as promising agents in anticancer strategies. Notable research efforts have been made in optimization processes of the identified aptamers, searching for increased target affinity and/or bioactivity by exploring structural analogues of the lead compounds. This review is focused on recent studies devoted to the development of DNA-based aptamers designed to target VEGF. Their therapeutic potential as well as their significance in the construction of highly selective biosensors is here discussed.

Modular protein-oligonucleotide signal exchange

While many methods are available to measure the concentrations of proteins in solution, the development of a method to quantitatively report both increases and decreases in different protein concentrations in real-time using changes in the concentrations of other molecules, such as DNA outputs, has remained a challenge. Here, we present a biomolecular reaction process that reports the concentration of an input protein in situ as the concentration of an output DNA oligonucleotide strand. This method uses DNA oligonucleotide aptamers that bind either to a specific protein selectively or to a complementary DNA oligonucleotide reversibly using toehold-mediated DNA strand-displacement. It is possible to choose the sequence of output strand almost independent of the sensing protein. Using this strategy, we implemented four different exchange processes to report the concentrations of clinically relevant human α-thrombin and vascular endothelial growth factor using changes in concentrations of DNA oligonucleotide outputs. These exchange processes can operate in tandem such that the same or different output signals can indicate changes in concentration of distinct or identical input proteins. The simplicity of our approach suggests a pathway to build devices that can direct diverse output responses in response to changes in concentrations of specific proteins.

Recent advances in aptamer-based sensors for breast cancer diagnosis: special cases for nanomaterial-based VEGF, HER2, and MUC1 aptasensors

Cancer is one of the most common and important diseases with a high mortality rate. Breast cancer is among the three most common types of cancer in women, and the mortality rate has reached 0.024% in some countries. For early-stage preclinical diagnosis of breast cancer, sensitive and reliable tools are needed. Today, there are many types of biomarkers that have been identified for cancer diagnosis. A wide variety of detection strategies have also been developed for the detection of these biomarkers from serum or other body fluids at physiological concentrations. Aptamers are single-stranded DNA or RNA oligonucleotides and promising in the production of more sensitive and reliable biosensor platforms in combination with a wide range of nanomaterials. Conformational changes triggered by the target analyte have been successfully applied in fluorometric, colorimetric, plasmonic, and electrochemical-based detection strategies. This review article presents aptasensor approaches used in the detection of vascular endothelial growth factor (VEGF), human epidermal growth factor receptor 2 (HER2), and mucin-1 glycoprotein (MUC1) biomarkers, which are frequently studied in the diagnosis of breast cancer. The focus of this review article is on developments of the last decade for detecting these biomarkers using various sensitivity enhancement techniques and nanomaterials.

Enhanced sensitivity of VEGF detection using catalase-mediated chemiluminescence immunoassay based on CdTe QD/H2O2 system

Background

Since vascular endothelial growth factor (VEGF) is a significant regulator of cancer angiogenesis, it is essential to develop a technology for its sensitive detection. Herein, we sensitized a chemiluminescence (CL) immunoassay through the combination of H₂O₂-sensitive TGA-CdTe quantum dot (QD) as signal transduction, dextran as a cross-linker to prepare enzyme-labeled antigen and the ultrahigh bioactivity of catalase (CAT) as reporter enzyme.

Results

Under the optimized experimental conditions, the chemiluminescence enzyme-linked immunosorbent assay (CL-ELISA) method can detect VEGF in the excellent linear range of 2–35,000 pg mL⁻¹, with a detection limit (S/N = 3) of 0.5 pg mL⁻¹ which was approximately ten times lower than the commercial colorimetric immunoassay. This proposed method has been successfully applied to the clinical determination of VEGF in the human serum samples, and the results illustrated an excellent correlation with the conventional ELISA method (R² = 0.997). The suitable recovery rate of the method in the serum ranged from 97 to 107%, with a relative standard deviation of 1.2% to 13.4%.

Conclusions

The novel immunoassay proposes a highly sensitive, specific, and stable method for very low levels detection of VEGF that can be used in the primary diagnosis of tumors. With the well-designed sensing platform, this approach has a broad potential to be applied for quantitative analysis of numerous disease-related protein biomarkers for which antibodies are available.

In Vitro Selection of New DNA Aptamers for Human Vascular Endothelial Growth Factor 165

Two DNA aptamers that bind the heparin-binding domain (HBD) of the human vascular endothelial growth factor 165 (VEGF-165) have been previously reported. Although VEGF-165 is a homodimeric protein and the two aptamers have different sequences and secondary structures, the aptamers appear to occupy the same binding site and cannot form a 2 : 1 aptamer/protein complex, thus making them unsuitable for creating a higher-affinity dimeric DNA aptamer. This has motivated us to conduct a new in vitro selection experiment to search for new VEGF-165-binding DNA aptamers with different properties. We undertook a multistream selection strategy in which the concentration of VEGF-165 was varied significantly. We carried out 11 rounds of selection, and next-generation sequencing was conducted for every round in each stream. From comprehensive sequence analysis, we identified four classes of DNA aptamers, of which two were reported before, but two are new DNA aptamers. One of the new aptamers exhibits a unique property that has never been observed before: it is capable of forming the 2 : 1 aptamer/protein complex with VEGF-165. This work has expanded the repertoire of VEGF-165-binding DNA aptamers and creates a possibility to engineer a higher affinity homodimeric aptamer for VEGF-165.

Tuning the Polymorphism of the Anti-VEGF G-rich V7t1 Aptamer by Covalent Dimeric Constructs

In the optimization process of nucleic acid aptamers, increased affinity and/or activity are generally searched by exploring structural analogues of the lead compound. In many cases, promising results have been obtained by dimerization of the starting aptamer. Here we studied a focused set of covalent dimers of the G-quadruplex (G4) forming anti-Vascular Endothelial Growth Factor (VEGF) V7t1 aptamer with the aim of identifying derivatives with improved properties. In the design of these covalent dimers, connecting linkers of different chemical nature, maintaining the same polarity along the strand or inverting it, have been introduced. These dimeric aptamers have been investigated using several biophysical techniques to disclose the conformational behavior, molecularity and thermal stability of the structures formed in different buffers. This in-depth biophysical characterization revealed the formation of stable G4 structures, however in some cases accompanied by alternative tridimensional arrangements. When tested for their VEGF₁₆₅ binding and antiproliferative activity in comparison with V7t1, these covalent dimers showed slightly lower binding ability to the target protein but similar if not slightly higher antiproliferative activity on human breast adenocarcinoma MCF-7 cells. These results provide useful information for the design of improved dimeric aptamers based on further optimization of the linker joining the two consecutive V7t1 sequences.

A highly sensitive colorimetric aptasensor for the detection of the vascular endothelial growth factor in human serum

Early detection of cancer is of great significance for disease prevention and diagnosis. However, the levels of most cancer markers are quite low in the early stages of disease, so it is urgent to develop a highly sensitive detection method. In this study, a label-free and highly sensitive colorimetric strategy was developed for the detection of the vascular endothelial growth factor₁₆₅ (VEGF₁₆₅) in human serum. First, a convenient biosensor was constructed by immobilizing VEGF₁₆₅ on a microplate, where aptamers bound with VEGF₁₆₅ to form a complex. Then, streptavidin labeled-horseradish peroxidase (HRP-SA) combined with the complex via the interaction between streptavidin and biotin, thus catalyzing the 3,3',5,5'-tetramethylbenzidine (TMB) and H₂O₂ system to produce colored products. In the presence of target, immobilized VEGF₁₆₅ and target competitively bound with the aptamers, resulting in a reduction of the colorimetric signal. Moreover, the optical density (OD) signal decreased with the increase of target concentration. The strategy showed a broad linear range (0.1-100 ng/mL) and a rather low detection limit of 10 pg/mL with good precision and selectivity. Further, the proposed method was successfully applied in detecting VEGF₁₆₅ in human serum. The detection results of serum samples showed that the proposed assay had a high correlation with CLEIA kits (r = 0.971, P = 0.001). It has potential for application in clinical research and diagnosis.

In Situ Visualization and SERS Monitoring of the Interaction between Tumor and Endothelial Cells Using 3D Microfluidic Networks

A multifunctional microfluidic platform was demonstrated to monitor the interaction between tumor cells and endothelial cells by integrating a three-dimensional (3D) cell culture unit with a protein detection unit. In such a chip, breast cancer cells MCF7 were seeded into the collagen to form a 3D tumor environment while human umbilical vein endothelial cells (HUVECs) are seeded in the channel next to the collagen matrix. Thus, an in situ growth of angiogenic sprouting can be visualized through fluorescence in the 3D collagen matrix after a coculture of MCF7 and HUVEC after 4 days, which cannot be observed in the 2D culture environment. On the other hand, gold@silver core-shell nanorods were used as surface-enhanced Raman scattering (SERS) immunoprobes for the detection of the secretion of cytokine (vascular endothelial growth factor, VEGF). The limit of detection of the VEGF is 100 pg/mL. Further, as LiCl and bevacizumab can act as a promoter and an inhibitor of VEGF, the dynamic change of the concentration of VEGF under the stimulation of them was monitored by SERS signals. Thus, this integrated SERS microfluidic platform creates opportunity for the fundamental research of interaction between tumors and endothelial cells.

Unraveling Determinants of Affinity Enhancement in Dimeric Aptamers for a Dimeric Protein

High-affinity aptamers can be derived de novo by using stringent conditions in SELEX (Systematic Evolution of Ligands by EXponential enrichment) experiments or can be engineered post SELEX via dimerization of selected aptamers. Using electrophoretic mobility shift assays, we studied a series of heterodimeric and homodimeric aptamers, constructed from two DNA aptamers with distinct primary sequences and secondary structures, previously isolated for VEGF-165, a homodimeric protein. We investigated four factors envisaged to impact the affinity of a dimeric aptamer to a dimeric protein: (1) length of the linker between two aptamer domains, (2) linking orientation, (3) binding-site compatibility of two component aptamers in a heterodimeric aptamer, and (4) steric acceptability of the two identical aptamers in a homodimeric aptamer. All heterodimeric aptamers for VEGF-165 were found to exhibit monomeric aptamer-like affinity and the lack of affinity enhancement was attributed to binding-site overlap by the constituent aptamers. The best homodimeric aptamer showed 2.8-fold better affinity than its monomeric unit (K_d = 13.6 ± 2.7 nM compared to 37.9 ± 14 nM), however the barrier to further affinity enhancement was ascribed to steric interference of the constituent aptamers. Our findings point to the need to consider the issues of binding-site compatibility and spatial requirement of aptamers for the development of dimeric aptamers capable of bivalent recognition. Thus, determinants highlighted herein should be assessed in future multimerization efforts.

DNA aptamer immobilized hydroxyapatite for enhancing angiogenesis and bone regeneration

In this study, we developed aptamer-conjugated hydroxyapatite (Apt-HA) that promotes bone regeneration and angiogenesis. The 3R02 bivalent aptamer specific to vascular endothelial growth factor (VEGF) was grafted to the hydroxyapatite (HA) surface. Apt-HA was tested for its VEGF protein capture ability to determine the optimal aptamer concentration immobilized on the HA. Apt-HA showed higher VEGF protein capture ability, and faster growth of human umbilical vein endothelial cell (HUVEC) compared to a neat HA with no cytotoxic effects on human osteoblasts. To examine in vivo angiogenesis and bone regeneration, Apt-HA and HA were bilaterally implanted into rabbit tibial metaphyseal defects and analyzed after eight weeks using micro-CT, histology, and histomorphometry. Apt-HA showed significantly increased the volume of new bones, the percentage of bone, and the density of bone mineral in cortical bone. Apt-HA also exhibited the enhanced bone formation at the cortical region in a histomorphometric analysis. Finally, Apt-HA showed significantly increased blood vessel number compared to a neat HA. In summary, the engineered Apt-HA has potential as a bone graft material that may simultaneously promote bone regeneration and angiogenesis. STATEMENT OF SIGNIFICANCE: This work presents a functional hydroxyapatite bone graft using a DNA-based aptamer which overcomes the limitations of existing bone graft materials, which use bound signaling peptides. DNA aptamer immobilized hydroxyapatite enhances the in vitro proliferation of human umbilical vascular endothelial cells as well as in vivo angiogenesis and bone regeneration. DNA aptamer immobilized hydroxyapatite shows no cytotoxic effect on human osteoblasts.

G-Quadruplex-Forming Aptamers-Characteristics, Applications, and Perspectives

G-quadruplexes constitute a unique class of nucleic acid structures formed by G-rich oligonucleotides of DNA- or RNA-type. Depending on their chemical nature, loops length, and localization in the sequence or structure molecularity, G-quadruplexes are highly polymorphic structures showing various folding topologies. They may be formed in the human genome where they are believed to play a pivotal role in the regulation of multiple biological processes such as replication, transcription, and translation. Thus, natural G-quadruplex structures became prospective targets for disease treatment. The fast development of systematic evolution of ligands by exponential enrichment (SELEX) technologies provided a number of G-rich aptamers revealing the potential of G-quadruplex structures as a promising molecular tool targeted toward various biologically important ligands. Because of their high stability, increased cellular uptake, ease of chemical modification, minor production costs, and convenient storage, G-rich aptamers became interesting therapeutic and diagnostic alternatives to antibodies. In this review, we describe the recent advances in the development of G-quadruplex based aptamers by focusing on the therapeutic and diagnostic potential of this exceptional class of nucleic acid structures.

Innovative engineering and sensing strategies for aptamer-based small-molecule detection

Aptamers are nucleic acid-based affinity reagents that have gained widespread attention as biorecognition elements for the detection of targets such as ions, small molecules, and proteins. Over the past three decades, the field of aptamer-based sensing has grown considerably. However, the advancement of aptamer-based small-molecule detection has fallen short of the high demand for such sensors in applications such as diagnostics, environmental monitoring, and forensics. This is due to two challenges: the complexity of developing generalized sensing platforms and the poor sensitivities of assays targeting small molecules. This paper will review new approaches for the streamlined development of high-performance aptamer-based sensors for small-molecule detection. We here provide historical context, explore the current state-of-the art, and offer future directions-with emphasis placed on new aptamer engineering methods, the use of cooperative binding, and label-free approaches using fully-folded, high-affinity aptamers for small-molecule sensing.

Development of Aptamer-Based TID Assays Using Thermophoresis and Microarrays

Aptamers are single-stranded oligonucleotides which can be used as alternative recognition elements for protein detection, because aptamers bind their targets with a high affinity similar to antibodies. Due to the targetinduced conformational changes of aptamers, these oligonucleotides can be applied in various biosensing platforms. In this work, aptamers directed against the vascular endothelial growth factor (VEGF) were used as a model system. VEGF plays a key role in physiological angiogenesis and vasculogenesis. Furthermore, VEGF is involved in the development and growth of cancer and other diseases like agerelated macular degeneration, rheumatoid arthritis, diabetes mellitus, and neurodegenerative disorders. Detecting the protein biomarker VEGF is therefore of great importance for medical research and diagnostics. In this research, VEGFbinding aptamers were investigated for the systematic development of a targetinduced dissociation (TID) assay utilizing thermophoresis and microarrays. The established aptamer-microarray allowed for the detection of 0.1 nM of VEGF. Furthermore, the systematic development of the TID method using the VEGF model protein could help to develop further TID assays for the detection of various protein biomarkers.

Recent Advances in Identifying Biomarkers and High-Affinity Aptamers for Gynecologic Cancers Diagnosis and Therapy

Cancer is the uncontrollable abnormal division of cell growth, caused due to the varied reasons. Cancer can be expressed in any part of the body, and it is one of the death-causing diseases. Human reproductive organs are commonly damaged by cancer. In particular, the women reproductive system is affected by various cancers including ovarian, cervical, endometrial, vaginal, fallopian tube, and vulvar cancers. Identifying these cancers at earlier stages prevents the damage to the organs. Aptamer is the potential probe that can identify these cancers. Aptamer is an artificial antibody selected from the randomized library of molecules and has a high binding affinity to the target biomarker. Targeting cancers in the reproductive organs using aptamers showed an excellent efficiency of detection compared to other probes. Different aptamers have been generated against the gynaecological cancer biomarkers, which include HE4, CA125, VEGF, OCCA (for ovarian cancer), EGFR, FGFR1, K-ras (for endometrial cancer), HPV E-16, HPV E-7, HPV E-6, tyrosine, and kinase (for cervical cancer), which help to identify the cancers in woman reproductive organs. In this overview, the biomarkers for gynecologic cancers and the relevant diagnosing systems generated using the specific aptamers are discussed. Furthermore, the therapeutic applications of aptamer with gynaecological cancers are narrated.

Updates on Aptamer Research

For many years, different probing techniques have mainly relied on antibodies for molecular recognition. However, with the discovery of aptamers, this has changed. The science community is currently considering using aptamers in molecular targeting studies because of the many potential advantages they have over traditional antibodies. Some of these possible advantages are their specificity, higher binding affinity, better target discrimination, minimized batch-to-batch variation, and reduced side effects. Overall, these characteristics of aptamers have attracted scholars to use them as molecular probes in place of antibodies, with some aptamer-based targeting products being now available in the market. The present review is aimed at discussing the potential of aptamers as probes in molecular biology and in super-resolution microscopy.

Rapidly Neutralizable and Highly Anticoagulant Thrombin-Binding DNA Aptamer Discovered by MACE SELEX

We present a rapidly neutralizable and highly anticoagulant thrombin-binding aptamer with a short toehold sequence, originally discovered by systematic evolution of ligands by exponential enrichment (SELEX) with microbead-assisted capillary electrophoresis (MACE). MACE is a novel CE-partitioning method for SELEX and able to separate aptamers from a library of unbound nucleic acids, where the aptamer and target complexes can be detected reliably and partitioned with high purity even in the first selection cycle. Three selection rounds of MACE-SELEX discovered several TBAs with a nanomolar affinity (K_d = 4.5-8.2 nM) that surpasses previously reported TBAs such as HD1, HD22, and NU172 (K_d = 118, 13, and 12 nM, respectively). One of the obtained aptamers, M08, showed a 10- to 20-fold longer prolonged clotting time than other anticoagulant TBAs, such as HD1, NU172, RE31, and RA36. Analyses of the aptamer and thrombin complexes using both bare and coated capillaries suggested that a large number of efficient aptamers are missed in conventional CE-SELEX because of increased interaction between the complex and the capillary. In addition, the toehold-mediated rapid antidote was designed for safe administration. The efficient aptamer and antidote system developed in the present study could serve as a new candidate for anticoagulant therapy.

Three decades of nucleic acid aptamer technologies: Lessons learned, progress and opportunities on aptamer development

Aptamers are short single-stranded nucleic acid sequences capable of binding to target molecules in a way similar to antibodies. Due to various advantages such as prolonged shelf life, low batch to batch variation, low/no immunogenicity, freedom to incorporate chemical modification for enhanced stability and targeting capacity, aptamers quickly found their potential in diverse applications ranging from therapy, drug delivery, diagnosis, and functional genomics to bio-sensing. Aptamers are generated by a process called SELEX. However, the current overall success rate of SELEX is far from being satisfactory, and still presents a major obstacle for aptamer-based research and application. The need for an efficient selection strategy consisting of defined procedures to deal with a wide variety of targets is significantly important. In this work, by analyzing key aspects of SELEX including initial library design, target preparation, PCR optimization, and single strand DNA separation, we provide a comprehensive analysis of individual steps to facilitate researchers intending to develop personalized protocols to address many of the obstacles in SELEX. In addition, this review provides suggestions and opinions for future aptamer development procedures to address the concerns on key SELEX steps, and post-SELEX modifications.

Aptamer-Based Biosensors to Detect Aquatic Phycotoxins and Cyanotoxins

Aptasensors have a great potential for environmental monitoring, particularly for real-time on-site detection of aquatic toxins produced by marine and freshwater microorganisms (cyanobacteria, dinoflagellates, and diatoms), with several advantages over other biosensors that are worth considering. Freshwater monitoring is of vital importance for public health, in numerous human activities, and animal welfare, since these toxins may cause fatal intoxications. Similarly, in marine waters, very effective monitoring programs have been put in place in many countries to detect when toxins exceed established regulatory levels and accordingly enforce shellfish harvesting closures. Recent advances in the fields of aptamer selection, nanomaterials and communication technologies, offer a vast array of possibilities to develop new imaginative strategies to create improved, ultrasensitive, reliable and real-time devices, featuring unique characteristics to produce and amplify the signal. So far, not many strategies have been used to detect aquatic toxins, mostly limited to the optic and electrochemical sensors, the majority applied to detect microcystin-LR using a target-induced switching mode. The limits of detection of these aptasensors have been decreasing from the nM to the fM order of magnitude in the past 20 years. Aspects related to sensor components, performance, aptamers sequences, matrices analyzed and future perspectives, are considered and discussed.

Simple Methods and Rational Design for Enhancing Aptamer Sensitivity and Specificity

Aptamers are structured nucleic acid molecules that can bind to their targets with high affinity and specificity. However, conventional SELEX (Systematic Evolution of Ligands by EXponential enrichment) methods may not necessarily produce aptamers of desired affinity and specificity. Thus, to address these questions, this perspective is intended to suggest some approaches and tips along with novel selection methods to enhance evolution of aptamers. This perspective covers latest novel innovations as well as a broad range of well-established approaches to improve the individual binding parameters (aptamer affinity, avidity, specificity and/or selectivity) of aptamers during and/or post-SELEX. The advantages and limitations of individual aptamer selection methods and post-SELEX optimizations, along with rational approaches to overcome these limitations are elucidated in each case. Further the impact of chosen selection milieus, linker-systems, aptamer cocktails and detection modules utilized in conjunction with target-specific aptamers, on the overall assay performance are discussed in detail, each with its own advantages and limitations. The simple variations suggested are easily available for facile implementation during and/or post-SELEX to develop ultrasensitive and specific assays. Finally, success studies of established aptamer-based assays are discussed, highlighting how they utilized some of the suggested methodologies to develop commercially successful point-of-care diagnostic assays.

Applications of Cancer Cell-Specific Aptamers in Targeted Delivery of Anticancer Therapeutic Agents

Aptamers are single-stranded oligonucleotides that specifically bind and interact with their corresponding targets, including proteins and cells, through unique three-dimensional structures. Numerous aptamers have been developed to target cancer biomarkers with high specificity and affinity, and some are employed as versatile guiding ligands for cancer-specific drug delivery and anti-cancer therapeutics. In this review, we list the aptamers that target tumor surface biomarkers and summarize the representative applications of aptamers as agonists and antagonists that activate anti-cancer and inactivate pro-cancer biomarkers, respectively. In addition, we describe applications of aptamer-drug or aptamer-oligonucleotide conjugates that can deliver therapeutic agents, including small interfering RNAs, micro RNAs, short hairpin RNAs, and chemotherapeutic molecules, to cancer cells. Moreover, we provide examples of aptamer- conjugated nano-vehicles, in which cancer-targeting oligonucleotide aptamers are conjugated with nano-vehicles such as liposomes, micelles, polymeric nanoparticles, and quantum dots. Conjugation of aptamers with anti-cancer drugs and nano-vehicles will facilitate innovative applications of aptamer-based cancer therapeutics.

Fluorescence Sensing Using DNA Aptamers in Cancer Research and Clinical Diagnostics

Among the various advantages of aptamers over antibodies, remarkable is their ability to tolerate a large number of chemical modifications within their backbone or at the termini without losing significant activity. Indeed, aptamers can be easily equipped with a wide variety of reporter groups or coupled to different carriers, nanoparticles, or other biomolecules, thus producing valuable molecular recognition tools effective for diagnostic and therapeutic purposes. This review reports an updated overview on fluorescent DNA aptamers, designed to recognize significant cancer biomarkers both in soluble or membrane-bound form. In many examples, the aptamer secondary structure switches induced by target recognition are suitably translated in a detectable fluorescent signal using either fluorescently-labelled or label-free aptamers. The fluorescence emission changes, producing an enhancement (“signal-on”) or a quenching (“signal-off”) effect, directly reflect the extent of the binding, thereby allowing for quantitative determination of the target in bioanalytical assays. Furthermore, several aptamers conjugated to fluorescent probes proved to be effective for applications in tumour diagnosis and intraoperative surgery, producing tumour-type specific, non-invasive in vivo imaging tools for cancer pre- and post-treatment assessment.

Aptamer Bioinformatics

Aptamers are short nucleic acid sequences capable of specific, high-affinity molecular binding. They are isolated via SELEX (Systematic Evolution of Ligands by Exponential Enrichment), an evolutionary process that involves iterative rounds of selection and amplification before sequencing and aptamer characterization. As aptamers are genetic in nature, bioinformatic approaches have been used to improve both aptamers and their selection. This review will discuss the advancements made in several enclaves of aptamer bioinformatics, including simulation of aptamer selection, fragment-based aptamer design, patterning of libraries, identification of lead aptamers from high-throughput sequencing (HTS) data and in silico aptamer optimization.

Identification of Aptamers That Bind to Sickle Hemoglobin and Inhibit Its Polymerization

The pathophysiology of sickle cell disease (SCD) is dependent on the polymerization of deoxygenated sickle hemoglobin (HbS), leading to erythrocyte deformation (sickling) and vaso-occlusion within the microvasculature. Following deoxygenation, there is a delay time before polymerization is initiated, during which nucleation of HbS monomers occurs. An agent with the ability to extend this delay time or slow polymerization would therefore hold a therapeutic, possibly curative, potential. We used the Systematic Evolution of Ligands by Exponential Enrichment (SELEX) method to screen for HbS-binding RNA aptamers modified with nuclease-resistant 2'-fluoropyrimidines. Polymerization assays were employed to identify aptamers with polymerization-inhibitory properties. Two noncompeting aptamers, DE3A and OX3B, were found to bind hemoglobin, significantly increase the delay time, and reduce the rate of polymerization of HbS. These modifiable, nuclease-resistant aptamers are potential new therapeutic agents for SCD.

G-Quadruplexes: Prediction, Characterization, and Biological Application

Guanine (G)-rich sequences in nucleic acids can assemble into G-quadruplex structures that involve G-quartets linked by loop nucleotides. The structural and topological diversity of G-quadruplexes have attracted great attention for decades. Recent methodological advances have advanced the identification and characterization of G-quadruplexes in vivo as well as in vitro, and at a much higher resolution and throughput, which has greatly expanded our current understanding of G-quadruplex structure and function. Accumulating knowledge about the structural properties of G-quadruplexes has helped to design and develop a repertoire of molecular and chemical tools for biological applications. This review highlights how these exciting methods and findings have opened new doors to investigate the potential functions and applications of G-quadruplexes in basic and applied biosciences.

Development of HGF-binding aptamers with the combination of G4 promoter-derived aptamer selection and in silico maturation

We describe the selection of aptamers based on bioinformatics-based approaches without Systematic Evolution of Ligands by EXponential enrichment (SELEX). SELEX is a potent method; however, it is time intensive and the PCR-amplification step, which is essential step for SELEX, leads to the loss of good aptamers. We have developed an aptamer-screening method, G4 promoter-derived aptamer selection (G4PAS), and an aptamer-improving method, in silico maturation (ISM). They are based on in silico sequence selection and computer assisted directed evolution, respectively. In this study, we succeeded in identifying new aptamers against hepatocyte growth factor (HGF) by G4PAS as well as improving the specificity of the HGF aptamers by ISM. Using ISM improved the specificity of the aptamer for HGF by up to 45-fold in comparison with the original aptamer. These methods enable easy and efficient identification of good aptamers, and the combination of G4PAS with ISM can thus serve as a potent approach for aptamer identification. Biotechnol. Bioeng. 2017;114: 2196-2203. © 2017 Wiley Periodicals, Inc.

Stepping Library-Based Post-SELEX Strategy Approaching to the Minimized Aptamer in SPR

When evolved from SELEX (systematic evolution of ligands by exponential enrichment), aptamers are generally about 70-130 nucleotides in length and needed to be effectively truncated for further diagnosis or therapeutic uses. Post-SELEX optimization is then aroused to simplify the aptamer sequence and improve the affinity property. In this work, we report a new post-SELEX strategy based on a stepping library for the first time. With a hypothesis that one nucleobase can influence the whole binding affinity through its adjacent base stacking and potential steric hydrogen bonding interaction, we designed a stepping library composed of all probable nucleotide truncation directions. We employed an aptamer 807-39nt toward EPO-α as a model, and surface plasmon resonance (SPR) as an efficient screening and evaluation method to optimize all label-free sequences in the library. We have successfully picked out In27 as the minimized aptamer from a mini library of only 35 sequences. Aptamer In27 has a sole loop, without the original stem portion of the initial aptamer, but retains the whole binding affinity. We have also defined the key nucleotide contribution by site mutagenesis with natural bases, and finally produced a degenerated sequence with higher or the same good affinities. Furthermore, we explored different binding behaviors between aptamer In27 and other recognition molecule such as agglutinin, monoclonal antibody, or receptor by competition or binding assays. Our work provides a new and efficient post-SELEX optimization strategy, as well as a minimized aptamer In27 with an explicit degenerated sequence and a defined binding behavior. That would enhance their great potential in future diagnosis and therapy.