Synthetic mononuclear nonheme iron-oxygen intermediates

Regiospecific arene C-H self-hydroxylation in pentadentate ligand via activation of atmospheric dioxygen utilizing Co(II) precursors under ambient reaction conditions: experimental and DFT optimized studies

The activation of dioxygen on redox-active metal centres is an important area of study in bioinorganic chemistry. One of the key challenges in this field is the activation of atmospheric dioxygen under ambient conditions. In this study, we report the ligand-induced activation of atmospheric dioxygen using cobalt(II) precursors and the oxygenation of arene C-H bonds within a pentadentate ligand under ambient conditions. Herein, a novel pentadentate ligand (BPMAP-H = (E)-2-(bis(pyridin-2-ylmethyl)amino)-N-(2-(phenyldiazenyl)phenyl)acetamide) having carboxamide and azo donor groups was synthesized and utilized for dioxygen activation. A number of cobalt(II) precursors, with BPMAP-H, provide [Co(III)BPMAP-O]ClO4 complex Co-1 with oxidation at the metal centre and phenyl ring oxygenation in the ligand backbone. Both the ligand BPMAP-H and complex Co-1 were well characterized by UV-visible spectroscopy, IR spectroscopy, 1H NMR, 13C NMR, 13C DEPT-135, HRMS, and single-crystal XRD. Several controlled experiments and DFT calculations were performed for mechanistic investigation and the in situ formed cobalt(III)-superoxide was characterized as a key intermediate with the help of EPR studies.

Debate of Nucleophilic versus Electrophilic Oxidative Aldehyde Deformylation by Mononuclear Nonheme Iron(III)-Peroxo and Iron(IV)-Oxo Complexes

High-valent iron(IV)-oxo species are fleeting intermediates that perform vital reactions in enzymatic catalysis. In contrast, heme and nonheme iron(III)-peroxo intermediates usually act as nucleophiles and are converted to high-valent iron-oxo intermediates for electrophilic oxidation reactions. Herein, we report a study on aldehyde deformylation reactions of 2-phenylpropionaldehyde (2-PPA) and its derivatives by iron(III)-peroxo complexes bearing tetramethylated cyclam (TMC) analogues, including [FeIII(O2)(12-TMC)]+ (1), [FeIII(O2)(13-TMC)]+ (2), and [FeIII(O2)(14-TMC)]+ (3). Reactivity studies by employing deuterated substrates, such as α-[D1]-2-phenylpropionaldehyde and aldehyde-[D]-2-phenylpropionaldehyde, demonstrate that deformylation of 2-PPA by the nonheme iron(III)-peroxo complexes occurs via abstraction of the stronger aldehyde C-H atom, rather than the expected nucleophilic attack or weaker α-C-H atom abstraction reactions. Interestingly, the preference for aldehyde C-H atom abstraction is retained during the deformylation of 2-PPA by iron(IV)-oxo complexes, i.e., [FeIV(O)(13-TMC)]2+ (4) and [FeIV(O)(N4Py)]2+ (5). DFT calculations reproduce the experimental trends in reactivity and reveal that the peroxide O-O bond is cleaved to form an iron(III)-dioxyl species that conducts aldehyde C-H bond abstraction; this chemoselectivity is achieved through stabilizing noncovalent interactions between the oxidants and the aromatic ring of the substrate that positions the aldehyde in close proximity to the FeIII-O2/FeIV═O cores. These new experimental and theoretical findings together with the previous demonstrations of the ability of 1-3 in hydrogen atom transfer, oxygen atom transfer, and cis-dihydroxylation reactions highlight that iron(III)-peroxo cores are not inherently nucleophiles and can have more important functions in chemical and biological oxidation reactions, rather than acting as transient species en route to high-valent metal-oxo intermediates.

Influence of a 2nd Sphere Hydrogen-Bond Donor on the Reactivity of Non-heme Fe(II) Complexes in Alkane, Alkene and Aromatic Oxidation with H2O2

Two iron(II) complexes of the pentadentate aminopyridine ligand L5 2(OH), bearing a 2nd sphere OH group in ortho position of one pyridine, were studied in the oxidation of various substrates using H2O2. While the addition of the OH group lowers the yields of alkane and aromatic oxidation, it improves the yield in alkene epoxidation. Spectroscopic analyses suggest that the pyridine-OH group stabilizes an Fe(III)OOH intermediate by hydrogen-bonding with the proximal O atom of hydroperoxo, but also eventually drives the system towards a dimeric structure, which competes with the oxidation process. The improvement in epoxidation yields is proposed to result from the fast reaction of cyclooctene with the active species, together with an enhanced oxidizing power induced by the hydrogen-bonding pattern.

Bispidine coordination chemistry

Bispidines are extremely rigid ligands, easy to prepare in a large variety, with denticities of four to ten, various donor sets and charges, for mono- and oligonuclear transition metal, main group and rare earth complexes. In the last approx. 20 years significantly more than 50 new bispidine based ligands were prepared and their coordination chemistry studied. Biological probes and medicinal applications is one main area in bispidine coordination chemistry, where fast complex formation, high stability, metal ion selectivity and inertness are of utmost importance. Oxygen activation and oxidation catalysis is another main focus in bispidine coordination chemistry, with catalyst efficiency and stability as well as product selectivity as important requirements. Particularly successful applications in these areas are presented and discussed in detail, in addition to fundamental principles that show the importance of ligand rigidity, cavity size and shape as overarching fundamental properties.

Experimental electronic structures of the FeIV=O bond in S=1 heme vs. nonheme sites: Effect of the porphyrin ligand

High-valent FeIV=O species are common intermediates in biological and artificial catalysts. Heme and nonheme S=1 FeIV=O sites have been synthesized and studied for decades but little quantitative experimental comparison of their electronic structures has been available, due to the lack of direct methods focused on the iron. This study allows a rigorous determination of the electronic structure of a nonheme FeIV=O center and its comparison to an FeIV=O heme site using 1s2p resonant inelastic X-ray scattering (RIXS) and Fe L-edge X-ray absorption spectroscopy (XAS). Further, variable temperature magnetic circular dichroism (VT-MCD) of the ligand field transitions, combined with nuclear resonance vibrational spectroscopy of the two S=1 FeIV=O systems show that the equatorial ligand field decreases from a nonheme to a heme FeIV=O site. Alternatively, RIXS and Fe L-edge XAS combined with MCD show that the Fe dπ orbitals are unperturbed in the FeIV=O heme relative to the nonheme site because the strong axial Fe-O bond uncouples the Fe dπ orbitals from the porphyrin π-system. As a consequence, the thermodynamics and kinetics of the H-atom abstraction reactions are actually very similar for heme compound II and nonheme FeIV=O active sites.

Amphoteric reactivity of iron(III)-hydroperoxo complex generated from proton- and salicylate-assisted dioxygen activation

We report the synthesis and characterization of an iron(III)-hydroperoxo complex generated from salicylate-assisted dioxygen activation by a cation-liganded iron(II) complex. Spectroscopic and theoretical data revealed stabilization of the end-on hydroperoxo ligand, and mechanistic insights, including a "V-shaped" Hammett plot, were confirmed by conducting oxygen atom transfer and proton-coupled electron transfer reactions.

10-Fold Increase in Hydrogen Atom Transfer Reactivity for a Series of S = 1 FeIV═O Complexes Over the S = 2 [(TQA)FeIV═O]2+ Complex via Entropic Lowering of Reaction Barriers by Secondary Sphere Cycloalkyl Substitution

Nonheme iron enzymes utilize S = 2 iron(IV)-oxo intermediates as oxidants in biological oxygenations. In contrast, corresponding synthetic nonheme FeIV═O complexes characterized to date favor the S = 1 ground state that generally shows much poorer oxidative reactivity than their S = 2 counterparts. However, one intriguing exception found by Nam a decade ago is the S = 1 [FeIV(O)(Me3NTB)]2+ complex (Me3NTB = [tris((N-methyl-benzimidazol-2-yl)methyl)amine], 1O) with a hydrogen atom transfer (HAT) reactivity that is 70% that of the S = 2 [FeIV(O)(TQA)]2+ complex (TQA = tris(2-quinolylmethyl)amine, 3O). In our efforts to further explore this direction, we have unexpectedly uncovered a family of new S = 1 complexes with HAT reaction rates beyond the currently reported limits in the tripodal ligand family, surpassing oxidation rates found for the S = 2 [FeIV(O)(TQA)]2+ complex by as much as an order of magnitude. This is achieved simply by replacing the secondary sphere methyl groups of the Me3NTB ligand with larger cycloalkyl-CH2 (R groups in 2OR) moieties ranging from c-propylmethyl to c-hexylmethyl. These 2OR complexes show Mössbauer data at 4 K and 1H NMR spectra at 193 and 233 K that reveal S = 1 ground states, in line with DFT calculations. Nevertheless, they give rise to the most reactive synthetic nonheme oxoiron(IV) complexes found to date within the tripodal ligand family. Our DFT study indicates transition state stabilization through entropy effects, similar to enzymatic catalysis.

Structural and reactivity insights into high-valent Co(III)-(μ-peroxo)-Co(IV) and its electromer Co(III)-(μ-superoxo)-Co(III)

Various metalloenzymes employ O2 for oxidative reactions, which is crucial in catalysis and biological processes involving high-valent metal-oxygen species. This study introduces novel high-valent Co(III)-(μ-1,2-O2)-Co(IV) and Co(III)-(μ-1,2-O2˙-)-Co(III) complexes, stabilized by an electron-donating TPA* ligand. This study advances our understanding of Co-oxygen intermediates, which are key for water oxidation catalysis.

Quantum effects in CH activation with [Cu2O2]2+ complexes

We investigate the mechanism of primary alkane CH bond activation with dioxo-dicopper ([Cu2O2]2+) complexes, which serve as model catalysts for enzymes capable of activating CH bonds under mild conditions. As large H/D kinetic isotope effects (KIEs) are observed in enzymes and their synthetic mimics, we employ density functional theory along with variational transition-state theory with multidimensional tunneling to estimate reaction rate coefficients. By systematically varying ligand electrophilicity and substrate chain length, we examine trends in rate coefficients and kinetic isotope effects for the two proposed CH activation pathways - one-step oxo-insertion and two-step radical recombination. Although larger tunneling transmission coefficients are obtained for the radical pathway, the oxo-insertion mechanism yields higher rate coefficients on account of lower activation barriers. The question of the preferred CH activation mechanism, however, remains open: excellent agreement is observed between the predicted and known experimental KIE results for the radical pathway, while calculated Hammett slopes for the oxo-insertion pathway closely mirror experiments.

cis-Dihydroxylation by Synthetic Iron(III)-Peroxo Intermediates and Rieske Dioxygenases: Experimental and Theoretical Approaches Reveal the Key O-O Bond Activation Step

Dioxygen (O2) activation by iron-containing enzymes and biomimetic compounds generates iron-oxygen intermediates, such as iron-superoxo, -peroxo, -hydroperoxo, and -oxo, that mediate oxidative reactions in biological and abiological systems. Among the iron-oxygen intermediates, iron(III)-peroxo species are less frequently implicated as active intermediates in oxidation reactions. In this study, we present the combined experimental and theoretical investigations on cis-dihydroxylation reactions mediated by synthetic mononuclear nonheme iron-peroxo intermediates, demonstrating the importance of supporting ligands and metal centers in activating the peroxo ligand toward the O-O bond homolysis for the cis-dihydroxylation reactions. We found a significant ring size effect of the TMC ligand in [FeIII(O2)(n-TMC)]+ (TMC = tetramethylated tetraazacycloalkane; n = 12, 13, and 14) on the cis-dihydroxylation reactivity order: [FeIII(O2)(12-TMC)]+ > [FeIII(O2)(13-TMC)]+ > [FeIII(O2)(14-TMC)]+. Additionally, we found that only [FeIII(O2)(n-TMC)]+, but not other metal-peroxo complexes such as [MIII(O2)(n-TMC)]+ (M = Mn, Co, and Ni), is reactive for the cis-dihydroxylation of olefins. Using density functional theory (DFT) calculations, we revealed that electron transfer from the Fe dxz orbital to the peroxo σ*(O-O) orbital facilitates the O-O bond homolysis, with the O-O bond cleavage barrier well correlated with the energy gap between the frontier molecular orbitals of dxz and σ*(O-O). Further computational studies showed that the reactivity of the synthetic [FeIII(O2)(12-TMC)]+ complex is comparable to that of Rieske dioxygenases in cis-dihydroxylation, providing compelling evidence of the potential involvement of Fe(III)-peroxo species in Rieske dioxygenases. Thus, the present results significantly advance our understanding of the cis-dihydroxylation mechanisms by Rieske dioxygenases and synthetic nonheme iron-peroxo models.

Stereoelectronic Tuning of Bioinspired Nonheme Iron(IV)-Oxo Species by Amide Groups in Primary and Secondary Coordination Spheres for Selective Oxygenation Reactions

Two mononuclear iron(II) complexes, [(6-amide2-BPMEN)FeII](OTf)2 (1) and [(6-amide-Me-BPMEN)FeII(OTf)](OTf) (2), supported by two BPMEN-derived (BPMEN = N1,N2-dimethyl-N1,N2-bis(pyridine-2-yl-methyl)ethane-1,2-diamine) ligands bearing one or two amide functionalities have been isolated to study their reactivity in the oxygenation of C-H and C═C bonds using isopropyl 2-iodoxybenzoate (iPr-IBX ester) as the oxidant. Both 1 and 2 contain six-coordinate high-spin iron(II) centers in the solid state and in solution. The 6-amide2-BPMEN ligand stabilizes an S = 1 iron(IV)-oxo intermediate, [(6-amide2-BPMEN)FeIV(O)]2+ (1A). The oxidant (1A) oxygenates the C-H and C═C bonds with a high selectivity. Oxidant 1A, upon treatment with 2,6-lutidine, is transformed into another oxidant [{(6-amide2-BPMEN)-(H)}FeIV(O)]+ (1B) through deprotonation of an amide group, resulting in a stronger equatorial ligand field and subsequent stabilization of the triplet ground state. In contrast, no iron-oxo species could be observed from complex 2 and [(6-Me2-BPMEN)FeII(OTf)2] (3) under similar experimental conditions. The iron(IV)-oxo oxidant 1A shows the highest A/K selectivity in cyclohexane oxidation and 3°/2° selectivity in adamantane oxidation reported for any synthetic nonheme iron(IV)-oxo complexes. Theoretical investigation reveals that the hydrogen bonding interaction between the -NH group of the noncoordinating amide group and Fe═O core smears out the equatorial charge density, reducing the triplet-quintet splitting, and thus helping complex 1A to achieve better reactivity.

Superoxide to Peroxide Interconversion in Ni-TMC Complexes: The Significance of Structure and Spin States

A deeper comprehension of the characteristics of metal-superoxide and metal-peroxide chemical species is imperative, considering their pivotal functions in oxygen transport, enzymatic activation, and catalytic oxygenations. O2 activation is mediated by the interconversion of superoxide and peroxide species. Even though there are multiple studies on metal-superoxide and -peroxide intermediates, robust examples of their interconversion processes are scarce synthetically. For example, Ni-superoxide/peroxide complexes have been characterized with N-Tetramethylated Cyclam (TMC) ligands with different ring sizes, i.e., Nickel(II)-superoxide complex is characterized with 14-TMC while Nickel(III)-peroxide complex with 12-TMC. Later, both complexes were obtained with 13-TMC ligand by employing different bases; interestingly, no evidence of interconversion between them was identified. What are the factors influencing these processes and why is this preference? We attempt a computational analysis of this issue and provide arguments based on our conclusions. 2-dimensional potential energy scan is performed on the 12-TMC, 13-TMC, and 14-TMC systems to identify the reaction path connecting superoxide and peroxide species. Analyses indicate that structure and spin states play a significant role in determining the probability of interconversion. The superoxide-peroxide interconversion process appears to be bound by their propensity for distinct structural features and spin states.

Trapping an Elusive Fe(IV)-Superoxo Intermediate Inside a Self-Assembled Nanocage in Water at Room Temperature

Molecular cavities that mimic natural metalloenzymes have shown the potential to trap elusive reaction intermediates. Here, we demonstrate the formation of a rare yet stable Fe(IV)-superoxo intermediate at room temperature subsequent to dioxygen binding at the Fe(III) site of a (Et4N)2[FeIII(Cl)(bTAML)] complex confined inside the hydrophobic interior of a water-soluble Pd6L412+ nanocage. Using a combination of electron paramagnetic resonance, Mössbauer, Raman/IR vibrational, X-ray absorption, and emission spectroscopies, we demonstrate that the cage-encapsulated complex has a Fe(IV) oxidation state characterized by a stable S = 1/2 spin state and a short Fe-O bond distance of ∼1.70 Å. We find that the O2 reaction in confinement is reversible, while the formed Fe(IV)-superoxo complex readily reacts when presented with substrates having weak C-H bonds, highlighting the lability of the O-O bond. We envision that such optimally trapped high-valent superoxos can show new classes of reactivities catalyzing both oxygen atom transfer and C-H bond activation reactions.

Unraveling the Geometry-Driven C═C Epoxidation and C-H Hydroxylation Reactivity of Tetra-Coordinated Nonheme Iron(IV)-Oxo Complexes

The electronic structure and reactivity of tetra-coordinated nonheme iron(IV)-oxo complexes have remained unexplored for years. The recent synthesis of a closed-shell iron(IV)-oxo complex [(quinisox)FeIV(O)]+ (1) has set up a platform to understand how such complexes compare with the celebrated open-shell iron-oxo chemistry. Herein, using density functional theory and ab initio calculations, we present an in-depth electronic structure investigation of the C═C epoxidation [oxygen atom transfer (OAT)] and C-H hydroxylation [hydrogen atom transfer (HAT)] reactivity of 1. Using a solvent-coordinated geometry of 1 (1') and other potential tetra-coordinated iron(IV)-oxo complexes bearing rigid ligands (2 and 3), we established the geometric origin of spin-state energetics and reactivity of 1. Complex 1 featuring a strong Fe-O bond exhibits OAT and HAT reactivity in its quintet state. The lowest quintet OAT pathway has a lower barrier by ∼4 kcal/mol than the quintet HAT pathway, corroborating the experimentally observed gas-phase OAT reactivity preference. A conventional HAT reactivity preference for 2 and a comparable OAT and HAT reactivity for 3 are observed. This further supports the geometry-driven reactivity preference for 1. Noncovalent interaction analyses reveal a pronounced π-π interaction between the substrate and ligand in the OAT transition state, rationalizing the origin of the observed reactivity preference for 1.

Protocatechuic acid enhanced the selective degradation of sulfonamide antibiotics in Fe(III)/peracetic acid process under actually neutral pH conditions

The practical application of the Fe-catalyzed peracetic acid (PAA) processes is seriously restricted due to the need for narrow pH working range and poor anti-interference capacity. This study demonstrates that protocatechuic acid (PCA), a natural and eco-environmental phenolic acid, significantly enhanced the removal of sulfonamide antibiotics in Fe(III)/PAA process under actually neutral pH conditions (6.0-8.0) by complexing Fe(III). With sulfamethoxazole (SMX) as the model contaminant, the pseudo-first-order rate constant of SMX elimination in PCA/Fe(III)/PAA process was 63.5 times higher than that in Fe(III)/PAA process at pH 7.0, surpassing most of the previously reported strategies-enhanced Fe-catalyzed PAA processes (i.e., picolinic acid and hydroxylamine etc.). Excluding the primary contribution of reactive species commonly found in Fe-catalyzed PAA processes (e.g., •OH, R-O•, Fe(IV)/Fe(V) and 1O2) to SMX removal, the Fe(III)-peroxy complex intermediate (CH3C(O)OO-Fe(III)-PCA) was proposed as the primary reactive species in PCA/Fe(III)/PAA process. DFT theoretical calculations indicate that CH3C(O)OO-Fe(III)-PCA exhibited stronger oxidation potential than CH3C(O)OO-Fe(III), thereby enhancing SMX removal. Four potential removal pathways of SMX were proposed and the toxicity of reaction solution decreased with the removal of SMX. Furthermore, PCA/Fe(III)/PAA process exhibited strong anti-interference capacity to common natural anions (HCO3-, Cl-and NO3-) and humic acid. More importantly, the PCA/Fe(III)/PAA process demonstrated high efficiency for SMX elimination in actual samples, even at a trace Fe(III) dosage (i.e., 5 μM). Overall, this study provided a highly-efficient and eco-environmental strategy to remove sulfonamide antibiotics in Fe(III)/PAA process under actually neutral pH conditions and to strengthen its anti-interference capacity, underscoring its potential application in water treatment.

Proton-assisted activation of a MnIII-OOH for aromatic C-H hydroxylation through a putative [MnVO] species

Adding HClO4 to [(BnTPEN)MnIII-OO]+ in MeOH generates a short-lived MnIII-OOH species, which converts to a putative MnVO species. The potent MnVO species in MeCN oxidizes the pendant phenyl ring of the ligand in an intramolecular fashion. The addition of benzene causes the formation of (BnTPEN)MnIII-phenolate. These findings suggest that high valent Mn species have the potential to catalyze challenging aromatic hydroxylation reactions.

Proximity Effects on the Reactivity of a Nonheme Iron (IV) Oxo Complex in C-H Oxidation

Precise control of substrate positioning and orientation (its proximity to the reactive unit) is often invoked to rationalize the superior enzymatic reaction rates and selectivities when compared to synthetic models. Artificial nonheme iron (IV) oxo (Fe(IV)=O) complexes react with C(sp3)-H bonds via a biomimetic Hydrogen Atom Transfer/Hydroxyl Rebound mechanism, but rates, site-selectivity and even hydroxyl rebound efficiency (ligand rebound versus substrate radical diffusion) are smaller than in oxygenases. Herein, we quantitatively analyze how substrate binding modulates nonheme Fe(IV)=O reactivity by comparing rates and outcomes of C-H oxidation by a pair of Fe(IV)=O complexes that share the same first coordination sphere but only one contains a crown ether receptor that recognizes the substrate. Substrate binding makes the reaction intramolecular, exhibiting Michaelis-Menten kinetics and increased reaction rates. In addition, C-H oxidation occurs with high site selectivity for remote sites. Analysis of Effective Molarity reveals that the system operates at its maximal theoretical capability for the oxidation of these remote sites. Remarkably, substrate positioning also affects Hydroxyl Rebound, whose efficiency only increases on the sites placed in proximity by recognition. Overall, these observations provide evidence that supramolecular control of substrate positioning can effectively modulate the reactivity of oxygenases and its models.

Catalytic Oxidation of Methanol to Formaldehyde Catalyzed by Iron Complex with N3S3-type Tripodal Ligand

A Fe3+ complex with N3S3-type tripod ligand, 1, reacts with O2 in CH3OH to generate formaldehyde, which has been studied structurally, spectroscopically, and electrochemically. Complex 1 crystallizes as an octahedral structure with crystallographic C3 symmetry around the metal, with Fe-N=2.2917(17) Å and Fe-S=2.3574(6) Å. UV-vis spectrum of 1 in CH3OH under Ar shows an intense band at 572 nm (ϵ 4,100 M-1cm-1), which shifts to 590 nm (ϵ 2,860 M-1cm-1) by the addition of O2, and a new peak appeared at 781 nm (ϵ 790 M-1cm-1). Such a spectral change is not observed in CH2Cl2. Cyclic voltammogram (CV) of 1 in CH2Cl2 under Ar gives reversible redox waves assigned to Fe2+/Fe3+ and Fe3+/Fe4+ couples at -1.60 V (ΔE=69 mV) and -0.53 V (ΔE=71 mV) vs Fc/Fc+, respectively. In contrast, in CH3OH, the reversible redox waves, albeit accompanied by a positive shift of the Fe2+/Fe3+ couple, are observed at -1.20 V (ΔE=85 mV) and -0.53 V (ΔE=64 mV) vs Fc/Fc+ under Ar. Interestingly, a catalytic current was observed for the CV of 1 in CH3OH in the presence of CH3ONa under Ar, when the sweep rate was slowed down.

Catalytic reduction of oxygen to water by non-heme iron complexes: exploring the effect of the secondary coordination sphere proton exchanging site

In this study, we prepared non-heme FeIII complexes (1, 2, and 3) of an N4 donor set of ligands (H2L, Me2L, and BPh2L). 1 is supported by a monoanionic bispyridine-dioxime ligand (HL). In 2 and 3, the primary coordination sphere of Fe remained similar to that in 1, except that the oxime protons of the ligand were replaced with two methyl groups and a bridging -BPh2 moiety, respectively. X-ray structures of the FeII complexes (1a and 3a) revealed similar Fe-N distances; however, they were slightly elongated in 2a. The FeIII/FeII potential of 1, 2, and 3 appeared at -0.31 V, -0.25 V, and 0.07 V vs. Fc+/Fc, respectively, implying that HL and Me2L have comparable donor properties. However, BPh2L is more electron deficient than HL or Me2L. 1 showed electrocatalytic oxygen reduction reaction (ORR) activity in acetonitrile in the presence of trifluoroacetic acid (TFAH) as the proton source at Ecat/2 = -0.45 V and revealed selective 4e-/4H+ reduction of O2 to H2O. 1 showed an effective overpotential (ηeff) of 0.98 V and turnover frequency (TOFmax) of 1.02 × 103 s-1. Kinetic studies revealed a kcat of 2.7 × 107 M-2 s-1. Strikingly, 2 and 3 remained inactive for electrocatalytic ORR, which established the essential role of the oxime scaffolds in the electrocatalytic ORR of 1. Furthermore, a chemical ORR of 1 has been investigated using decamethylferrocene as the electron source. For 1, a similar rate equation was noted to that of the electrocatalytic pathway. A kcat of 6.07 × 104 M-2 s-1 was found chemically. Complex 2, however, underwent a very slow chemical ORR. Complex 3 chemically enhances the 4e-/4H+ reduction of O2 and exhibits a TOF of 0.24 s-1 and a kcat value of 2.47 × 102 M-1 s-1. Based on the experimental observations, we demonstrate that the oxime backbone of the ligand in 1 works as a proton exchanging site in the 4e-/4H+ reduction of O2. The study describes how the ORR is affected by the tuning of the ligand scaffold in a family of non-heme Fe complexes.

Redox Processes Involving Oxygen: The Surprising Influence of Redox-Inactive Lewis Acids

Metalloenzymes with heteromultimetallic active sites perform chemical reactions that control several biogeochemical cycles. Transformations catalyzed by such enzymes include dioxygen generation and reduction, dinitrogen reduction, and carbon dioxide reduction-instrumental transformations for progress in the context of artificial photosynthesis and sustainable fertilizer production. While the roles of the respective metals are of interest in all these enzymatic transformations, they share a common factor in the transfer of one or multiple redox equivalents. In light of this feature, it is surprising to find that incorporation of redox-inactive metals into the active site of such an enzyme is critical to its function. To illustrate, the presence of a redox-inactive Ca2+ center is crucial in the Oxygen Evolving Complex, and yet particularly intriguing given that the transformation catalyzed by this cluster is a redox process involving four electrons. Therefore, the effects of redox inactive metals on redox processes-electron transfer, oxygen- and hydrogen-atom transfer, and O-O bond cleavage and formation reactions-mediated by transition metals have been studied extensively. Significant effects of redox inactive metals have been observed on these redox transformations; linear free energy correlations between Lewis acidity and the redox properties of synthetic model complexes are observed for several reactions. In this Perspective, these effects and their relevance to multielectron processes will be discussed.

Electronic Structure and Reactivity of Mononuclear Nonheme Iron-Peroxo Complexes as a Biomimetic Model of Rieske Oxygenases: Ring Size Effects of Macrocyclic Ligands

We report the macrocyclic ring size-electronic structure-electrophilic reactivity correlation of mononuclear nonheme iron(III)-peroxo complexes bearing N-tetramethylated cyclam analogues (n-TMC), [FeIII(O2)(12-TMC)]+ (1), [FeIII(O2)(13-TMC)]+ (2), and [FeIII(O2)(14-TMC)]+ (3), as a model study of Rieske oxygenases. The Fe(III)-peroxo complexes show the same δ and pseudo-σ bonds between iron and the peroxo ligand. However, the strength of these interactions varies depending on the ring size of the n-TMC ligands; the overall Fe-O bond strength and the strength of the Fe-O2 δ bond increase gradually as the ring size of the n-TMC ligands becomes smaller, such as from 14-TMC to 13-TMC to 12-TMC. MCD spectroscopy plays a key role in assigning the characteristic low-energy δ → δ* LMCT band, which provides direct insight into the strength of the Fe-O2 δ bond and which, in turn, is correlated with the superoxo character of the iron-peroxo group. In oxidation reactions, reactivities of 1-3 toward hydrocarbon C-H bond activation are compared, revealing the reactivity order of 1 > 2 > 3; the [FeIII(O2)(n-TMC)]+ complex with a smaller n-TMC ring size, 12-TMC, is much more reactive than that with a larger n-TMC ring size, 14-TMC. DFT analysis shows that the Fe(III)-peroxo complex is not reactive toward C-H bonds, but it is the end-on Fe(II)-superoxo valence tautomer that is responsible for the observed reactivity. The hydrogen atom abstraction (HAA) reactivity of these intermediates is correlated with the overall donicity of the n-TMC ligand, which modulates the energy of the singly occupied π* superoxo frontier orbital that serves as the electron acceptor in the HAA reaction. The implications of these results for the mechanism of Rieske oxygenases are further discussed.

Peroxymonosulfate Activation by Fe(III)-Picolinate Complexes for Efficient Water Treatment at Circumneutral pH: Fe(III)/Fe(IV) Cycle and Generation of Oxyl Radicals

Improving the reactivity of Fe(III) for activating peroxymonosulfate (PMS) at circumneutral pH is critical to propel the iron-activated PMS processes toward practical wastewater treatment but is yet challenging. Here we employed the complexes of Fe(III) with the biodegradable picolinic acid (PICA) to activate PMS for degradation of selected chlorinated phenols, antibiotics, pharmaceuticals, herbicides, and industrial compounds at pH 4.0-6.0. The FeIII-PICA complexes greatly outperformed the ligand-free Fe(III) and other Fe(III) complexes of common aminopolycarboxylate ligands. In the main activation pathway, the key intermediate is a peroxymonosulfate complex, tentatively identified as PICA-FeIII-OOSO3-, which undergoes O-O homolysis or reacts with FeIII-PICA and PMS to yield FeIV=O and SO4•- without the involvement of commonly invoked Fe(II). PICA-FeIII-OOSO3- can also react directly with certain compounds (chlorophenols and sulfamethoxazole). The relative contributions of PICA-FeIII-OOSO3-, FeIV=O, and SO4•- depend on the structure of target compounds. This work sets an eligible example to enhance the reactivity of Fe(III) toward PMS activation by ligands and sheds light on the previously unrecognized role of the metal-PMS complexes in directing the catalytic cycle and decontamination as well.

Challenges Relating to the Quantification of Ferryl(IV) Ion and Hydroxyl Radical Generation Rates Using Methyl Phenyl Sulfoxide (PMSO), Phthalhydrazide, and Benzoic Acid as Probe Compounds in the Homogeneous Fenton Reaction

Ferryl ion ([FeIVO]2+) has often been suggested to play a role in iron-based advanced oxidation processes (AOPs) with its presence commonly determined using the unique oxidation pathway from methyl phenyl sulfoxide (PMSO) to methyl phenyl sulfone (PMSO2). However, we show here that the oxidation products of PMSO, formed on reaction with hydroxyl radical, enhance PMSO2 formation as a result of their complexation with Fe(III) leading to the changes in the reactivity of Fe(III) species in the homogeneous Fenton reaction. As such, PMSO should be used with caution to investigate the role of [FeIVO]2+ in iron-based AOPs with these insights suggesting the need to reassess the findings of many previous studies in which this reagent was used. The other common target compounds, phthalhydrazide and hydroxybenzoic acids, were also found to modify the rate and extent of iron cycling as a result of complexation and/or redox reactions, either by the probe compound itself and/or oxidation products formed. Overall, this study highlights that these confounding effects of the aromatic probe compounds on the reactivity of iron species should be recognized if reliable mechanistic insights into iron-based AOPs are to be obtained.

Mechanistic Insights into Nitrile Activation by Cobalt(III)-Hydroperoxo Intermediates: The Influence of Ligand Basicity

The versatile applications of nitrile have led to the widespread use of nitrile activation in the synthesis of pharmacologically and industrially valuable compounds. We reported the activation of nitriles using mononuclear cobalt(III)-hydroperoxo complexes, [CoIII(Me3-TPADP)(O2H)(RCN)]2+ [R = Me (2) and Ph (2Ph)], to form cobalt(III)-peroxyimidato complexes, [CoIII(Me3-TPADP)(R-C(=NH)O2)]2+ [R = Me (3) and Ph (3Ph)]. The independence of the rate on the nitrile concentration and the positive Hammett value of 3.2(2) indicated that the reactions occur via an intramolecular nucleophilic attack of the hydroperoxide ligand to the coordinated nitrile carbon atom. In contrast, the previously reported cobalt(III)-hydroperoxo complex, [CoIII(TBDAP)(O2H)(CH3CN)]2+ (2TBDAP), exhibited the deficiency of reactivity toward nitrile. The comparison of pKa values and redox potentials of 2 and 2TBDAP showed that Me3-TPADP had a stronger ligand field strength than that of TBDAP. The density functional theory calculations for 2 and 2TBDAP support that the strengthened ligand field in 2 is mainly due to the replacement of two tert-butyl amine donors in TBDAP with methyl groups in Me3-TPADP, resulting in the compression of the Co-Nax bond lengths. These results provide mechanistic evidence of nitrile activation by the cobalt(III)-hydroperoxo complex and indicate that the basicity dependent on the ligand framework contributes to the ability of nitrile activation.

Computational Discovery of Stable Metal-Organic Frameworks for Methane-to-Methanol Catalysis

The challenge of direct partial oxidation of methane to methanol has motivated the targeted search of metal-organic frameworks (MOFs) as a promising class of materials for this transformation because of their site-isolated metals with tunable ligand environments. Thousands of MOFs have been synthesized, yet relatively few have been screened for their promise in methane conversion. We developed a high-throughput virtual screening workflow that identifies MOFs from a diverse space of experimental MOFs that have not been studied for catalysis, yet are thermally stable, synthesizable, and have promising unsaturated metal sites for C-H activation via a terminal metal-oxo species. We carried out density functional theory calculations of the radical rebound mechanism for methane-to-methanol conversion on models of the secondary building units (SBUs) from 87 selected MOFs. While we showed that oxo formation favorability decreases with increasing 3d filling, consistent with prior work, previously observed scaling relations between oxo formation and hydrogen atom transfer (HAT) are disrupted by the greater diversity in our MOF set. Accordingly, we focused on Mn MOFs, which favor oxo intermediates without disfavoring HAT or leading to high methanol release energies─a key feature for methane hydroxylation activity. We identified three Mn MOFs comprising unsaturated Mn centers bound to weak-field carboxylate ligands in planar or bent geometries with promising methane-to-methanol kinetics and thermodynamics. The energetic spans of these MOFs are indicative of promising turnover frequencies for methane to methanol that warrant further experimental catalytic studies.

Organoantimony Dihydroperoxides: Synthesis, Crystal Structures, and Hydrogen Bonding Networks

Despite growing interest in the potential applications of p-block hydroperoxo complexes, the chemistry of inorganic hydroperoxides remains largely unexplored. For instance, single-crystal structures of antimony hydroperoxo complexes have not been reported to date. Herein, we present the synthesis of six triaryl and trialkylantimony dihydroperoxides [Me₃Sb(OOH)₂, Me₃Sb(OOH)₂·H₂O, Ph₃Sb(OOH)₂·0.75(C₄H₈O), Ph₃Sb(OOH)₂·2CH₃OH, pTol₃Sb(OOH)₂, pTol₃Sb(OOH)₂·2(C₄H₈O)], obtained by the reaction of the corresponding dibromide antimony(V) complexes with an excess of highly concentrated hydrogen peroxide in the presence of ammonia. The obtained compounds were characterized by single-crystal and powder X-ray diffraction, Fourier transform infrared and Raman spectroscopies, and thermal analysis. The crystal structures of all six compounds reveal hydrogen-bonded networks formed by hydroperoxo ligands. In addition to the previously reported double hydrogen bonding, new types of hydrogen-bonded motifs formed by hydroperoxo ligands were found, including infinite hydroperoxo chains. Solid-state density functional theory calculation of Me₃Sb(OOH)₂ revealed reasonably strong hydrogen bonding between OOH ligands with an energy of 35 kJ/mol. Additionally, the potential application of Ph₃Sb(OOH)₂·0.75(C₄H₈O) as a two-electron oxidant for the enantioselective epoxidation of olefins was investigated in comparison with Ph₃SiOOH, Ph₃PbOOH, t-BuOOH, and H₂O₂.

Systematic Electronic Tuning on the Property and Reactivity of Cobalt-(Hydro)peroxo Intermediates

A series of cobalt(III)-peroxo complexes, [Co^III(R₂-TBDAP)(O₂)]⁺ (1^R2; R₂ = Cl, H, and OMe), and cobalt(III)-hydroperoxo complexes, [Co^III(R₂-TBDAP)(O₂H)(CH₃CN)]²⁺ (2^R2), bearing electronically tuned tetraazamacrocyclic ligands (R₂-TBDAP = N,N'-di-tert-butyl-2,11-diaza[3.3](2,6)-p-R₂-pyridinophane) were prepared from their cobalt(II) precursors and characterized by various physicochemical methods. The X-ray diffraction and spectroscopic analyses unambiguously showed that all 1^R2 compounds have similar octahedral geometry with a side-on peroxocobalt(III) moiety, but the O-O bond lengths of 1^Cl [1.398(3) Å] and 1^OMe [1.401(4) Å] were shorter than that of 1^H [1.456(3) Å] due to the different spin states. For 2^R2, the O-O bond vibration energies of 2^Cl and 2^OMe were identical at 853 cm^-1 (856 cm^-1 for 2^H), but their Co-O bond vibration frequencies were observed at 572 cm^-1 for 2^Cl and 550 cm^-1 for 2^OMe, respectively, by resonance Raman spectroscopy (560 cm^-1 for 2^H). Interestingly, the redox potentials (E_1/2) of 2^R2 increased in the order of 2^OMe (0.19 V) < 2^H (0.24 V) < 2^Cl (0.34 V) according to the electron richness of the R₂-TBDAP ligands, but the oxygen-atom-transfer reactivities of 2^R2 showed a reverse trend (k₂: 2^Cl < 2^H < 2^OMe) with a 13-fold rate enhancement at 2^OMe over 2^Cl in a sulfoxidation reaction with thioanisole. Although the reactivity trend contradicts the general consideration that electron-rich metal-oxygen species with low E_1/2 values have sluggish electrophilic reactivity, this could be explained by a weak Co-O bond vibration of 2^OMe in the unusual reaction pathway. These results provide considerable insight into the electronic nature-reactivity relationship of metal-oxygen species.

Use of Singlet Oxygen in the Generation of a Mononuclear Nonheme Iron(IV)-Oxo Complex

Nonheme iron(III)-superoxo intermediates are generated in the activation of dioxygen (O₂) by nonheme iron(II) complexes and then converted to iron(IV)-oxo species by reacting with hydrogen donor substrates with relatively weak C-H bonds. If singlet oxygen (¹O₂) with ca. 1 eV higher energy than the ground state triplet oxygen (³O₂) is employed, iron(IV)-oxo complexes can be synthesized using hydrogen donor substrates with much stronger C-H bonds. However, ¹O₂ has never been used in generating iron(IV)-oxo complexes. Herein, we report that a nonheme iron(IV)-oxo species, [Fe^IV(O)(TMC)]²⁺ (TMC = tetramethylcyclam), is generated using ¹O₂, which is produced with boron subphthalocyanine chloride (SubPc) as a photosensitizer, and hydrogen donor substrates with relatively strong C-H bonds, such as toluene (BDE = 89.5 kcal mol^-1), via electron transfer from [Fe^II(TMC)]²⁺ to ¹O₂, which is energetically more favorable by 0.98 eV, as compared with electron transfer from [Fe^II(TMC)]²⁺ to ³O₂. Electron transfer from [Fe^II(TMC)]²⁺ to ¹O₂ produces an iron(III)-superoxo complex, [Fe^III(O₂)(TMC)]²⁺, followed by abstracting a hydrogen atom from toluene by [Fe^III(O₂)(TMC)]²⁺ to form an iron(III)-hydroperoxo complex, [Fe^III(OOH)(TMC)]²⁺, that is further converted to the [Fe^IV(O)(TMC)]²⁺ species. Thus, the present study reports the first example of generating a mononuclear nonheme iron(IV)-oxo complex with the use of singlet oxygen, instead of triplet oxygen, and a hydrogen atom donor with relatively strong C-H bonds. Detailed mechanistic aspects, such as the detection of ¹O₂ emission, the quenching by [Fe^II(TMC)]²⁺, and the quantum yields, have also been discussed to provide valuable mechanistic insights into understanding nonheme iron-oxo chemistry.

Active Learning Exploration of Transition-Metal Complexes to Discover Method-Insensitive and Synthetically Accessible Chromophores

Transition-metal chromophores with earth-abundant transition metals are an important design target for their applications in lighting and nontoxic bioimaging, but their design is challenged by the scarcity of complexes that simultaneously have well-defined ground states and optimal target absorption energies in the visible region. Machine learning (ML) accelerated discovery could overcome such challenges by enabling the screening of a larger space but is limited by the fidelity of the data used in ML model training, which is typically from a single approximate density functional. To address this limitation, we search for consensus in predictions among 23 density functional approximations across multiple rungs of "Jacob's ladder". To accelerate the discovery of complexes with absorption energies in the visible region while minimizing the effect of low-lying excited states, we use two-dimensional (2D)efficient global optimization to sample candidate low-spin chromophores from multimillion complex spaces. Despite the scarcity (i.e., ∼0.01%) of potential chromophores in this large chemical space, we identify candidates with high likelihood (i.e., >10%) of computational validation as the ML models improve during active learning, representing a 1000-fold acceleration in discovery. Absorption spectra of promising chromophores from time-dependent density functional theory verify that 2/3 of candidates have the desired excited-state properties. The observation that constituent ligands from our leads have demonstrated interesting optical properties in the literature exemplifies the effectiveness of our construction of a realistic design space and active learning approach.

Lewis acid improved dioxygen activation by a non-heme iron(II) complex towards tryptophan 2,3-dioxygenase activity for olefin oxygenation

Dioxygen activation and catalysis around ambient temperature is a long-standing challenge in chemistry. Inspired by the significant roles of the hydrogen bond network in dioxygen activation and catalysis by redox enzymes, this work presents a Lewis acid improved dioxygen activation by an Fe^II(BPMEN)(OTf)₂ complex towards tryptophan 2,3-dioxygenase (TDO) activity for 3-methylindole and common olefinic CC  bond oxygenation and cleavage (enzymatic Brønsted acid vs. chemical Lewis acid). It was found that the presence of a Lewis acid such as Sc³⁺ could substantially improve olefinic CC  bond oxygenation and cleavage activity through Fe^II(BPMEN)(OTf)₂ catalyzed dioxygen activation. Notably, a more negative ρ value in the Hammett plot of para-substituted styrene oxygenations was observed in the presence of a stronger Lewis acid, disclosing the enhanced electrophilic oxygenation capability of the putative iron(III) superoxo species through its electrostatic interaction with a stronger Lewis acid. Thereof, this work has demonstrated a new strategy in catalyst design for dioxygen activation and catalysis for olefin oxygenation, a significant process in the chemical industry.

The Elusive Mononitrosylated [Fe4 S4 ] Cluster in Three Redox States

Iron-sulfur clusters are well-established targets in biological nitric oxide (NO) chemistry, but the key intermediate in these processes-a mononitrosylated [Fe4 S4 ] cluster-has not been fully characterized in a protein or a synthetic model thereof. Here, we report the synthesis of a three-member redox series of isostructural mononitrosylated [Fe4 S4 ] clusters. Mononitrosylation was achieved by binding NO to a 3 : 1 site-differentiated [Fe4 S4 ]+ cluster; subsequent oxidation and reduction afforded the other members of the series. All three clusters feature a local high-spin Fe3+ center antiferromagnetically coupled to 3 [NO]- . The observation of an anionic NO ligand suggests that NO binding is accompanied by formal electron transfer from the cluster to NO. Preliminary reactivity studies with the monocationic cluster demonstrate that exposure to excess NO degrades the cluster, supporting the intermediacy of mononitrosylated intermediates in NO sensing/signaling.

Non-heme oxoiron complexes as active intermediates in the water oxidation process with hydrogen/oxygen atom transfer reactions

In this study, we explore the water oxidation process with the help of density functional theory. The formation of an oxygen-oxygen bond is crucial in the water oxidation process. Here, we report the formation of the oxygen-oxygen bond by the N5-coordinate oxoiron species with a higher oxidation state of Fe^IV and Fe^V. This bond formation is studied through the nucleophilic addition of water molecules and the transfer of the oxygen atom from meta-chloroperbenzoic acid (mCPBA). Our study reveals that the oxygen-oxygen bond formation by reacting mCPBA with Fe^VO requires less activation barrier (13.7 kcal mol^-1) than the other three pathways. This bond formation by the oxygen atom transfer (OAT) pathway is more favorable than that achieved by the hydrogen atom transfer (HAT) pathway. In both cases, the oxygen-oxygen bond formation occurs by interacting the σ*d_z²-2p_z molecular orbital of the iron-oxo intermediate with the 2p_x orbital of the oxygen atom. From this study, we understand that the oxygen-oxygen bond formation by Fe^IVO with the OAT process is also feasible (16 kcal mol^-1), suggesting that Fe^VO may not always be required for the water oxidation process by non-heme N5-oxoiron. After the oxygen-oxygen bond formation, the release of the dioxygen molecule occurs with the addition of the water molecule. The release of dioxygen requires a barrier of 7.0 kcal mol^-1. The oxygen-oxygen bond formation is found to be the rate-determining step.

Isolating Fe-O2 Intermediates in Dioxygen Activation by Iron Porphyrin Complexes

Dioxygen (O2) is an environmentally benign and abundant oxidant whose utilization is of great interest in the design of bioinspired synthetic catalytic oxidation systems to reduce energy consumption. However, it is unfortunate that utilization of O2 is a significant challenge because of the thermodynamic stability of O2 in its triplet ground state. Nevertheless, nature is able to overcome the spin state barrier using enzymes, which contain transition metals with unpaired d-electrons facilitating the activation of O2 by metal coordination. This inspires bioinorganic chemists to synthesize biomimetic small-molecule iron porphyrin complexes to carry out the O2 activation, wherein Fe-O2 species have been implicated as the key reactive intermediates. In recent years, a number of Fe-O2 intermediates have been synthesized by activating O2 at iron centers supported on porphyrin ligands. In this review, we focus on a few examples of these advances with emphasis in each case on the particular design of iron porphyrin complexes and particular reaction environments to stabilize and isolate metal-O2 intermediates in dioxygen activation, which will provide clues to elucidate structures of reactive intermediates and mechanistic insights in biological processes.

New Strategies for Direct Methane-to-Methanol Conversion from Active Learning Exploration of 16 Million Catalysts

Despite decades of effort, no earth-abundant homogeneous catalysts have been discovered that can selectively oxidize methane to methanol. We exploit active learning to simultaneously optimize methane activation and methanol release calculated with machine learning-accelerated density functional theory in a space of 16 M candidate catalysts including novel macrocycles. By constructing macrocycles from fragments inspired by synthesized compounds, we ensure synthetic realism in our computational search. Our large-scale search reveals that low-spin Fe(II) compounds paired with strong-field (e.g., P or S-coordinating) ligands have among the best energetic tradeoffs between hydrogen atom transfer (HAT) and methanol release. This observation contrasts with prior efforts that have focused on high-spin Fe(II) with weak-field ligands. By decoupling equatorial and axial ligand effects, we determine that negatively charged axial ligands are critical for more rapid release of methanol and that higher-valency metals [i.e., M(III) vs M(II)] are likely to be rate-limited by slow methanol release. With full characterization of barrier heights, we confirm that optimizing for HAT does not lead to large oxo formation barriers. Energetic span analysis reveals designs for an intermediate-spin Mn(II) catalyst and a low-spin Fe(II) catalyst that are predicted to have good turnover frequencies. Our active learning approach to optimize two distinct reaction energies with efficient global optimization is expected to be beneficial for the search of large catalyst spaces where no prior designs have been identified and where linear scaling relationships between reaction energies or barriers may be limited or unknown.

Heme compound II models in chemoselectivity and disproportionation reactions

Heme compound II models bearing electron-deficient and -rich porphyrins, [FeIV(O)(TPFPP)(Cl)]- (1a) and [FeIV(O)(TMP)(Cl)]- (2a), respectively, are synthesized, spectroscopically characterized, and investigated in chemoselectivity and disproportionation reactions using cyclohexene as a mechanistic probe. Interestingly, cyclohexene oxidation by 1a occurs at the allylic C-H bonds with a high kinetic isotope effect (KIE) of 41, yielding 2-cyclohexen-1-ol product; this chemoselectivity is the same as that of nonheme iron(iv)-oxo intermediates. In contrast, as observed in heme compound I models, 2a yields cyclohexene oxide product with a KIE of 1, demonstrating a preference for C[double bond, length as m-dash]C epoxidation. The latter result is interpreted as 2a disproportionating to form [FeIV(O)(TMP+˙)]+ (2b) and FeIII(OH)(TMP), and 2b becoming the active oxidant to conduct the cyclohexene epoxidation. In contrast to 2a, 1a does not disproportionate under the present reaction conditions. DFT calculations confirm that compound II models prefer C-H bond hydroxylation and that disproportionation of compound II models is controlled thermodynamically by the porphyrin ligands. Other aspects, such as acid and base effects on the disproportionation of compound II models, have been discussed as well.

Triphenyllead Hydroperoxide: A 1D Coordination Peroxo Polymer, Single-Crystal-to-Single-Crystal Disproportionation to a Superoxo/Hydroxo Complex, and Application in Catalysis

The synthesis, transformation, and application in catalysis of triphenyllead hydroperoxide, the first dioxygen lead complex, are described. Triphenyllead hydroperoxide is characterized by ²⁰⁷Pb nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and single-crystal X-ray diffraction, revealing the first one-dimensional (1D) coordination peroxo polymer. Photolytic isomorphous transformation of Ph₃PbOOH yields a mixed hydroxo/superoxo crystalline structure, the first nonalkali superoxo crystalline metal salt, which is stable up to 100 °C. Upon further photolysis, another isomorphous transformation of the superoxide to hydroxide is observed. These are the first single-crystal-to-single-crystal hydroperoxide-to-superoxide and then to hydroxide transformations reported to date. Photolysis of triphenyllead hydroperoxide yields two forms of superoxide-doped crystalline structures that are distinguished by widely different characteristic relaxation times. The use of Ph₃PbOOH as an easy-to-handle solid two-electron oxidant for the highly enantioselective epoxidation of olefins is described.

Metalloporphyrins as Catalytic Models for Studying Hydrogen and Oxygen Evolution and Oxygen Reduction Reactions

The hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) are involved in biological and artificial energy conversions. H-H and O-O bond formation/cleavage are essential steps in these reactions. In nature, intermediates involved in the H-H and O-O bond formation/cleavage are highly reactive and short-lived, making their identification and investigation difficult. In artificial catalysis, the realization of these reactions at considerable rates and close to their thermodynamic reaction equilibria remains a challenge. Therefore, the elucidation of the reaction mechanisms and structure-function relationships is of fundamental significance to understand these reactions and to develop catalysts.This Account describes our recent investigations on catalytic HER, OER, and ORR with metalloporphyrins and derivatives. Metalloporphyrins are used in nature for light harvesting, energy conversion, electron transfer, O₂ activation, and peroxide degradation. Synthetic metal porphyrin complexes are shown to be active for these reactions. We focused on exploring metalloporphyrins to study reaction mechanisms and structure-function relationships because they have stable and tunable structures and characteristic spectroscopic properties.For HER, we identified three H-H bond formation mechanisms and established the correlation between these processes and metal hydride electronic structures. Importantly, we provided direct experimental evidence for the bimetallic homolytic H-H bond formation mechanism by using sterically bulky porphyrins. Homolytic HER has been long proposed but rarely verified because the coupling of active hydride intermediates occurs spontaneously and quickly, making their detection challenging. By blocking the bimolecular mechanism through steric effects, we stabilized and characterized the Ni^III-H intermediate and verified homolytic HER by comparing the reaction behaviors of Ni porphyrins with and without steric effects. We therefore provided an unprecedented example to control homolytic versus heterolytic HER mechanisms through tuning steric effects of molecular catalysts.For the OER, the water nucleophilic attack (WNA) on high-valent terminal Mn-oxo has been proposed for the O-O bond formation in natural and artificial water oxidation. By using Mn tris(pentafluorophenyl)corrole, we identified Mn^V(O) and Mn^IV-peroxo intermediates in chemical and electrochemical OER and provided direct experimental evidence for the Mn-based WNA mechanism. Moreover, we demonstrated several catalyst design strategies to enhance the WNA rate, including the pioneering use of protective axial ligands. By studying Cu porphyrins, we proposed a bimolecular coupling mechanism between two metal-hydroxide radicals to form O-O bonds. Note that late-transition metals do not likely form terminal metal-oxo/oxyl.For the ORR, we presented several strategies to improve activity and selectivity, including providing rapid electron transfer, using electron-donating axial ligands, introducing hydrogen-bonding interactions, constructing dinuclear cooperation, and employing porphyrin-support domino catalysis. Importantly, we used Co porphyrin atropisomers to realize both two-electron and four-electron ORR, representing an unparalleled example to control ORR selectivity by tuning only steric effects without modifying molecular and/or electronic structures.Lastly, we developed several strategies to graft metalloporphyrins on various electrode materials through different covalent bonds. The molecular-engineered materials exhibit boosted electrocatalytic performance, highlighting promising applications of molecular electrocatalysis. Taken together, this Account demonstrates the benefits of exploring metalloporphyrins for the HER, OER, and ORR. The knowledge learned herein is valuable for the development of porphyrin-based catalysts and also other molecular and material catalysts for small molecule activation reactions.

Intermediate-spin iron(IV)-oxido species with record reactivity

The nonheme iron(IV)-oxido complex trans-N3-[(L¹)Fe^IVO(Cl)]⁺, where L¹ is a derivative of the tetradentate bispidine 2,4-di(pyridine-2-yl)-3,7-diazabicyclo[3.3.1]nonane-1-one, has an S = 1 electronic ground state and is the most reactive nonheme iron model system known so far, of a similar order of reactivity as nonheme iron enzymes (C-H abstraction of cyclohexane, -90 °C (propionitrile), t_1/2 = 3.5 s). The reaction with cyclohexane selectively leads to chlorocyclohexane, but "cage escape" at the [(L¹)Fe^III(OH)(Cl)]⁺/cyclohexyl radical intermediate lowers the productivity. Ligand field theory is used herein to analyze the d-d transitions of [(L¹)Fe^IVO(X)]ⁿ⁺ (X = Cl^-, Br^-, MeCN) in comparison with the thoroughly characterized ferryl complex of tetramethylcyclam (TMC = L²; [(L²)Fe^IVO(MeCN)]²⁺). The ligand field parameters and d-d transition energies are shown to provide important information on the triplet-quintet gap and its correlation with oxidation reactivity.

A new hexanuclear Fe(III) nanocluster: Synthesis, structure, magnetic properties, and efficient activity as a precatalyst in water oxidation

The oxo-bridged hexanuclear iron cluster formulated, [Fe6III(µ4-O)2(edteH)2(piv)4(SCN)4]∙2MeCN∙2H2O (1) (where, edteH = N,N,N′,N′-tetrakis(2-hydroxyethyl)ethylenediamine; piv = pivalic acid) is synthesized by the reaction of FeCl2∙4H2O with edteH4 and piv in the presence...

Catalytic properties of the ferryl ion in the solid state: a computational review

This review summarises the last findings in the emerging field of heterogeneous catalytic oxidation of light alkanes by ferryl species supported on solid-state systems such as the conversion of methane into methanol by FeO-MOF74.

Which is the real oxidant in the competitive ligand self-hydroxylation and substrate oxidation, a biomimetic iron(II)-hydroperoxo species or an oxo-iron(IV)-hydroxy one?

Nonheme iron(II)-hydroperoxo species (FeII-(η2-OOH)) 1 and the concomitant oxo-iron(IV)-hydroxyl one 2 are proposed as the key intermediates of a large class of 2-oxoglutarate dependent dioxygenases (e.g., isopenicillin N synthase). Extensive...

Effect of Substituent on C-H Activation Catalysed by a nonheme Fe(IV)O Complex: A Computational Investigation of Reactivity and Hydrogen Tunneling

A density functional theory investigation has been presented here to address the C-H activation reactivity and the influence of quantum mechanical tunneling catalyzed by a non-heme iron(IV)-Oxo complex viz. [FeIVOdpaq-X]+...

Recent progresses in the chemistry of 12-membered pyridine-containing tetraazamacrocycles: From synthesis to catalysis

This article provides an overview (non-comprehensive) on recent developments regarding pyridine-containing 12-membered tetraazamacrocycles with pyclen or Py2N2 backbones and their metal complexes from 2017 to the present. Firstly, the synthesis...

A Reactive, Photogenerated High-Spin (S = 2) FeIV(O) Complex via O2 Activation

Addition of dioxygen at low temperature to the non-heme ferrous complex Fe^II(Me₃TACN)((OSi^Ph2)₂O) (1) in 2-MeTHF produces a peroxo-bridged diferric complex Fe₂^III(μ-O₂)(Me₃TACN)₂((OSi^Ph2)₂O)₂ (2), which was characterized by UV-vis, resonance Raman, and variable field Mössbauer spectroscopies. Illumination of a frozen solution of 2 in THF with white light leads to homolytic O-O bond cleavage and generation of a Fe^IV(O) complex 4 (ν(Fe=O) = 818 cm^-1; δ = 0.22 mm s^-1, ΔE_Q = 0.23 mm s^-1). Variable field Mössbauer spectroscopy measurements show that 4 is a rare example of a high-spin S = 2 Fe^IV(O) complex and the first synthetic example to be generated directly from O₂. Complex 4 is highly reactive, as expected for a high-spin ferryl, and decays rapidly in fluid solution at cryogenic temperatures. This decay process in 2-MeTHF involves C-H cleavage of the solvent. However, the controlled photolysis of 2 in situ with visible light and excess phenol substrate leads to competitive phenol oxidation, via the proposed transient generation of 4 as the active oxidant.