Potential-Resolved Electrochemiluminescence Nanoprobes for Visual Apoptosis Evaluation at Single-Cell Level

Electrochemiluminescent evaluation of GLUT4 expression in rat adipocytes induced by Ganoderma lucidum polysaccharides

Glucose transporter 4 (GLUT4) directly facilitates cellular uptake of glucose and plays a crucial role in mammalian adipose tissue glucose metabolism. In this work, we constructed a cytosensor for sensitive electrochemiluminescence (ECL) detection of GLUT4 in rat adipocytes (RA cells). A carbon nanotube sponge (CNTSP) was selected to fabricate a permeable electrode to overcome the steric hindrance of cells on the electrode. The expression of GLUT4 after treatment with Ganoderma lucidum polysaccharide (GLP) was assessed by analyzing the luminescence emitted from cell-surface ECL probes. Our preliminary results suggest that GLP promote the expression of GLUT4, thereby enhancing the uptake of the fluorescent glucose 2-NBDG. Treatment with GLP affected GLUT4 expression in RA cells in a dose-dependent manner. Additionally, the ECL cytosensor contributes to the development of ECL imaging of receptors on the cell surface for clinical drug evaluation.

Controllable synthesis of flower-like hierarchical porous TiO2 at room temperature and its affinity application

Flower-like particles have attracted much attention due to their efficient surface accessible sites and unique hierarchical porous structure. However, their synthesis is usually challenging and requires complex procedures. Herein, we present a simple method for rapid preparation of flower-like hierarchical porous TiO2 (FHP-TiO2) at room temperature for the first time. This method can accurately control the size of FHP-TiO2 from 150 nm to 400 nm by combining co-assembly and Stober reaction. The formation mechanism and influencing factors of FHP-TiO2 were systematically investigated, and its excellent metal oxide affinity was confirmed by theoretical calculations. Due to its hierarchical porous structure, large surface area and high specificity performance, FHP-TiO2 served as an appealing restricted-access adsorbent for specific and efficient enrichment of molecules with phosphate groups in a complex sample matrix, thereby realizing the quantitative analysis of these important biomolecules by coupling with high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). Moreover, compared with other morphologies (rough surface, and hollow dendritic and mesoporous structure) of TiO2 and flower-like SiO2, FHP-TiO2 showed the best affinity binding ability. This research not only presents a novel approach for tunable room-temperature synthesis of FHP-TiO2 with different sizes, but also expands the application of FHP-TiO2 as an appealing sample-enricher for food safety monitoring and early disease diagnosis.

Electrochemiluminescence Analysis of Multiple Glycans on Single Living Cell with a Closed Bipolar Electrode Array Chip

The profiling of multiple glycans on a single cell is important for elucidating glycosylation mechanisms and accurately identifying disease states. Herein, we developed a closed bipolar electrode (BPE) array chip for live single-cell trapping and in situ galactose and sialic acid detection with the electrochemiluminescence (ECL) method. Methylene blue-DNA (MB-DNA) as well as biotin-DNA (Bio-DNA) codecorated AuNPs were prepared as nanoprobes, which were selectively labeled on the cell surface through chemoselective labeling techniques. The individual cell was captured and labeled in the microtrap of the cathodic chamber, under an appropriate potential, MB molecules on the cellular membrane underwent oxidation, triggering the reduction of [Ru(bpy)3]2+/TPA and consequently generating ECL signals in the anodic chamber. The abundance of MB groups on the single cell enabled selective monitoring of both sialic acid and galactosyl groups with high sensitivity using ECL. The sialic acid and galactosyl content per HepG2 cell were detected to be 0.66 and 0.82 fmol, respectively. Through comprehensive evaluation of these two types of glycans on a single cell, tumor cells, and normal cells could be effectively discriminated and the accuracy of single-cell heterogeneous analysis was improved. Additionally, dynamic monitoring of variations in galactosyl groups on the surface of the single cell was also achieved. This work introduced a straightforward and convenient approach for heterogeneity analysis among single cells.

Application and outlook of electrochemical technology in single-cell analysis

Cellular heterogeneity, especially in some important diseased cells like tumor cells, acts as an invisible driver for disease development like cancer progression in the tumor ecosystem, contributing to differences in the macroscopic and microscopic detection of disease lesions like tumors. Traditional analysis techniques choose group information masked by the mean as the analysis sample, making it difficult to achieve precise diagnosis and target treatment, on which could be shed light via the single-cell level determination/bioanalysis. Hence, in this article we have reviewed the special characteristic differences among various kinds of typical single-cell bioanalysis strategies and electrochemical techniques, and then focused on the recent advance and special bio-applications of electrochemiluminescence and micro-nano electrochemical sensing mediated in single-cell bioimaging & bioanalysis. Especially, we have summarized the relevant research exploration of the possibility to establish the in-situ single-cell electrochemical methods to detect cell heterogeneity through determination of specific biomolecules and bioimaging of some important biological processes. Eventually, this review has explored some important advances of electrochemical single-cell detection techniques for the real-time cellular bioimaging and diagnostics of some disease lesions like tumors. It raises the possibility to provide the specific in-situ platform to exploit the versatile, sensitive, and high-resolution electrochemical single-cell analysis for the promising biomedical applications like rapid tracing of some disease lesions or in vivo bioimaging for precise cancer theranostics.

Potential-Resolved Electrochemiluminescence Multiplex Immunoassay for Florfenicol and Chloramphenicol in a Single Sample

The simultaneous detection of multiple antibiotic residues in food is of great significance for food safety. In this work, a novel dual-potential electrochemiluminescence (ECL) immunoassay was designed for the simultaneous detection of chloramphenicol and fluorfenicol residues in food. Ru@MOF was used as an anodic probe, and SnS2 QDs-PEI-Au-MoS2 was used as a cathodic probe. Notably, the coreactant for both luminophores was K2S2O8, avoiding interactions caused by different kinds of coreactants. Au nanoparticles functionalized with a nitrogen- and sulfur-doped graphene oxide-modified glassy carbon electrode to improve the electron transfer efficiency and provide a larger surface area for immobilization of antigen. The linear range for the detection of florfenicol was determined to be 0.1-1000 ng mL-1 with a detection limit of 0.03 ng mL-1, and the linear range for the detection of chloramphenicol was 0.01-1000 ng mL-1 with a detection limit of 3.2 pg mL-1 by recording the ECL responses at two different excitation potentials. The proposed immunoassay achieved a more stable recovery in the detection of actual samples and provided a new analytical method for the simultaneous detection of florfenicol and chloramphenicol residues with high sensitivity and specificity.

An In Situ Investigation of the Protein Corona Formation Kinetics of Single Nanomedicine Carriers by Self-Regulated Electrochemiluminescence Microscopy

Protein coronas are present extensively at the bio-nano interface due to the natural adsorption of proteins onto nanomaterials in biological fluids. Aside from the robust property of nanoparticles, the dynamics of the protein corona shell largely define their chemical identity by altering interface properties. However, the soft coronas are normally complex and rapidly changing. To real-time monitor the entire formation, we report here a self-regulated electrochemiluminescence (ECL) microscopy based on the interaction of the Ru(bpy)3 3+ with the nanoparticle surface. Thus, the heterogeneity of the protein corona is in situ observed in single nanoparticle "cores" before and after loading drugs in nanomedicine carriers. The label-free, optical stable and dynamic ECL microscopy minimize misinterpretations caused by the variation of nanoparticle size and polydispersity. Accordingly, the synergetic actions of proteins and nanoparticles properties are uncovered by chemically engineered protein corona. After comparing the protein corona formation kinetics in different complex systems and different nanomedicine carriers, the universality and accuracy of this technique were well demonstrated via the protein corona formation kinetics curves regulated by competitive adsorption of Ru(bpy)3 3+ and multiple proteins on surface of various carriers. The work is of great significance for studying bio-nano interface in drug delivery and targeted cancer treatment.

Dual-potential electrochemiluminescence cytosensor based on a metal-organic framework and ABEI-PEI-Au@AgNPs for the simultaneous determination of phosphatidylserine and epidermal growth factor receptors on an apoptotic cell surface

A new electrochemiluminescence (ECL) cytosensor is proposed for the simultaneous determination of phosphatidylserine (PS) and epidermal growth factor receptor (EGFR) based on the ECL signals of metal-organic framework-5 (MOF-5) loaded CdS quantum dots and N-(aminobutyl)-N-(ethylisoluminol)-polyethylenimine capped Au and Ag nanoparticles. Apoptosis promotes the exposure of PS and reduces the expression of EGFR in cell membranes. Two spatially resolved areas on dual-disk glassy carbon electrodes were designed to eliminate the interference from different ECL probes. Using HepG2 cells treated with resveratrol to induce apoptosis, the cytosensor exhibited high sensitivity, simplicity, and high reproducibility, demonstrating its potential in drug screening and rapid apoptotic cell detection. The strategy reported provides a promising platform for the highly sensitive cytosensing and convenient screening of clinically relevant anticancer drugs.

Dual-potential encoded electrochemiluminescence for multiplexed gene assay with one luminophore as tag

Multiplexed gene assay for simultaneously detecting the multi-targets of nucleic acids is strongly anticipated for the accurate diseases diagnosis and prediction, and all commercial available gene assays for IVD are a kind of single-target assay. Herein, a dual-potential encoded and coreactant-free electrochemiluminescence (ECL) strategy is proposed for the multiplexed gene assay, which can be conveniently carried out by directly oxidizing the same luminescent tag of dual-stabilizers-capped CdTe nanocrystals (NCs). The CdTe NCs linked with sulfhydryl-RNA via Cd-S bond merely exhibits one ECL process around 0.32 V with a narrow triggering-potential-window of 0.35 V, while CdTe NCs linked with amino-RNA via amide linkage solely gives off one ECL process around 0.82 V with a narrow triggering-potential-window of 0.30 V. Multiplexing ECL of both sulfhydryl-RNA-functionalized CdTe NCs and amino-RNA-functionalized CdTe NCs can be utilized to simultaneously detect the open reading frame 1ab (ORF1ab) and the nucleoprotein (N) genes without crosstalk, in which ECL of sulfhydryl-RNA-functionalized CdTe NCs can dynamically determine ORF1ab from 200 aM to 10 fM with a limit of detection (LOD) of 100 aM, while ECL of amino-RNA-functionalized CdTe NCs can linearly detect N gene from 5 fM to 1 pM with a LOD of 2 fM. Post-engineering CdTe NCs with RNA in a labeling-bond engineering way would provide a potential-selective and encoded ECL strategy for multiplexed gene assay with one luminophore.

Electrochemiluminescence immunoassay strategies based on a hexagonal Ru-MOF and MoS2@GO nanosheets: detection of 5-fluorouracil in serum samples

Herein, a competitive-type electrochemiluminescence immunosensor for ultrasensitive detection of 5-fluorouracil (5-FU) was fabricated. Ruthenium(II)-metal-organic framework (Ru-MOF) nanosheets were selected to act a promising ECL luminophore using tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) dichloride (Ru(dcbpy)₃²⁺) as the organic ligand. The two-dimensional (2D) Ru-MOF nanosheets achieved an increased loading of Ru(dcbpy)₃²⁺ and effectively prevented leakage of the ECL emitter during application, which exhibited satisfactory ECL performance. Thin two-dimensional MoS₂@GO was used to modify the electrode as the sensing platform for improving the electron transfer rate and loading more 5-FU coating antigens due to its large specific surface area and piezoelectric catalytic efficiency. Under the optimized conditions, the proposed immunosensor presented high sensitivity, a wide detection range (0.0001 ng-100 ng mL^-1), a low limit of detection (0.031 pg mL^-1, S/N = 3), good specificity and stability. Furthermore, the immunosensor was successfully applied for the detection of 5-FU in human serum samples with satisfactory results, proving this strategy has potential applications in bioanalysis and clinical diagnosis.

Quantitative Single-Molecule Electrochemiluminescence Bioassay

A single-molecule electrochemiluminescence bioassay is developed here which allows imaging and direct quantification of single biomolecules. Imaging single biomolecules is realized by localizing the electrochemiluminescence events of the labeled molecules. Such an imaging system allows mapping the spatial distribution of biomolecules with electrochemiluminescence and contains quantitative single-molecule insights. We further quantify biomolecules by spatiotemporally merging the repeated reactions at one molecule site and then counting the clustered molecules. The proposed single-molecule electrochemiluminescence bioassay is used to detect carcinoembryonic antigen, showing a limit of detection of 67 attomole concentration which is 10 000 times better than conventional electrochemiluminescence bioassays. This spatial resolution and sensitivity enable single-molecule electrochemiluminescence bioassay a new toolbox for both specific bioimaging and ultrasensitive quantitative analysis.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

Advances in electrochemiluminescence for single-cell analysis

Recent years have witnessed the emergence of innovative analytical methods with high sensitivity and spatiotemporal resolution that allowed qualitative and quantitative analysis to be carried out at single-cell and subcellular levels. Electrochemiluminescence (ECL) is a unique chemiluminescence of high-energy electron transfer triggered by electrical excitation. The ingenious combination of electrochemistry and chemiluminescence results in the distinct advantages of high sensitivity, a wide dynamic range and good reproducibility. Specifically, single-cell ECL (SCECL) analysis with excellent spatiotemporal resolution has emerged as a promising toolbox in bioanalysis for revealing individual cells' heterogeneity and stochastic processes. This review focuses on advances in SCECL analysis and bioimaging. The history and recent advances in ECL probes and strategies for system design are briefly reviewed. Subsequently, the latest advances in representative SCECL analysis techniques for bioassays, bioimaging and therapeutics are also highlighted. Then, the current challenges and future perspectives are discussed.

Recent Advances in Single Cell Analysis by Electrochemiluminescence

Understanding biological mechanisms operating in cells is one of the major goals of biology. Since heterogeneity is the fundamental property of cellular systems, single cell measurements can provide more accurate information about the composition, dynamics, and regulatory circuits of cells than population-averaged assays. Electrochemiluminescence (ECL), the light emission triggered by electrochemical reactions, is an emerging approach for single cell analysis. Numerous analytes, ranging from small biomolecules such as glucose and cholesterol, proteins and nucleic acids to subcellular structures, have been determined in single cells by ECL, which yields new insights into cellular functions. This review aims to provide an overview of research progress on ECL principles and systems for single cell analysis in recent years. The ECL reaction mechanisms are briefly introduced, and then the advances and representative works in ECL single cell analysis are summarized. Finally, outlooks and challenges in this field are addressed.

An Iron(III)-Based Metal-Organic Gel-Catalyzed Dual Electrochemiluminescence System for Cytosensing and In Situ Evaluation of the VEGF165 Subtype

The recent surge of interest in metal-organic gels (MOGs) has emerged for their soft porous structure, large surface area, and abundant active metal sites, making them a promising candidate for building catalyst matrices. In this work, facilely synthesized Fe(III)-organic gel was directly used as a robust electrode matrix. Detailed studies illustrated that their Fe(III) centers can speed up the electro-oxidation/reduction of the H₂O₂ coreactant to produce reactive oxygen species for enhancing a potential-resolved dual electrochemiluminescence (ECL) emission. Among them, the anodic signal of luminol varied with the cell concentration based on the impedance ECL mechanism, while the cathodic signal of CdS quantum dots traced the VEGF₁₆₅ subtype at cell surface by specific aptamer recognition. Based on this, a ratiometric strategy was proposed for accurate cytosensing by eliminating environmental interference. Moreover, by cooperating these two signals, a novel strategy was developed for direct evaluation of the VEGF₁₆₅ subtype, further realizing rapid drug screening and subtype assessment on different cell lines. This work not only opens up the promising application of MOGs as an effective catalyst matrix but also develops reliable cell assays and protein subtype identification for clinical diagnosis and research.

Recent progress in electrochemiluminescence microscopy analysis of single cells

An overview of recent progress in electrochemiluminescence microscopy analysis of single cells classified according to different ECL routes, namely the oxidative-reduction, low oxidation potential, catalytic and direct oxidation routes.

Visualization analysis of lecithin in drugs based on electrochemiluminescent single gold microbeads

Fast and high-throughput determination of drugs is a key trend in clinical medicine. Single particles have increasingly been adopted in a variety of photoanalytical and electroanalytical applications, and microscopic analysis has been a hot topic in recent years, especially for electrochemiluminescence (ECL). This paper describes a simple ECL method based on single gold microbeads to image lecithin. Lecithin reacts to produce hydrogen peroxide under the successive enzymatic reaction of phospholipase D and choline oxidase. ECL was generated by the electrochemical reaction between a luminol analog and hydrogen peroxide, and ECL signals were imaged by a camera. Despite the heterogeneity of single gold microbeads, their luminescence obeyed statistical regularity. The average luminescence of 30 gold microbeads is correlated with the lecithin concentration, and thus, a visualization method for analyzing lecithin was established. Calibration curves were constructed for ECL intensity and lecithin concentration, achieving detection limits of 0.05 mM lecithin. This ECL imaging platform based on single gold microbeads exhibits outstanding advantages, such as high throughput, versatility and low cost, and holds great potential in disease diagnostics, environmental monitoring and food safety.

•

The ECL imaging strategy reflected the advantage of spatial resolution and high-throughput analysis of lecithin in drugs.

•

Micrometer-scale gold microbeads were easily synthesized by adding H₂SO₄ in Na₃Au(SO₃)₂ solution.

•

The ECL spots exhibited the heterogeneity of single gold microbeads in ECL reaction.

•

ECL microscopic quantitative analysis for lecithin was established via single gold microbeads with PLD and COD.

Enhanced electrochemiluminescence ratiometric cytosensing based on surface plasmon resonance of Au nanoparticles and nanosucculent films

Ramos cells are human Burkitt's lymphoma cells, which are a kind of cancer cells to facilitate the monitoring of the relevant biological processes of cancers. Sensitive and accurate detection of Ramos cells using emerging ratiometric ECL biosensing technology shows increasing importance, however, the target analytes of current ratiometric ECL biosensors are mainly limited to DNA/RNA or proteins. In this study, we proposed a dual-potential ratiometric sensing strategy for the electrochemiluminescence detection of Ramos cells based on two types of electrochemiluminescence (ECL)-responding molecular. Au nanosucculent films (AuNFs) were electrodeposited on the fluorine doped tin oxide (FTO) electrode to increase the effective area of the electrode for more efficient assembly of DNA and effectively improving the conductivity of the sensing interfaces. In the presence of Ramos cells, aptamers capped with Au@luminol would conjugate with Ramos cells and then remove from AuNFs, accompanying the decrease of ECL signal from Au@luminol. Then, Au-DNA was captured and alternately hybridized with DNA-modified CdS nanocrystals (NCs) on the surface of AuNFs with the formation of a super reticulate structure. The reticulate structure not only raised another identified ECL signal from CdS NCs but also greatly promoted its ECL intensity from the surface plasmon resonance originating from Au NPs. The value of log (ECL_CdS/ECL_luminol) and the logarithm of the number of cells exhibit considerable linear relation ranging from 80 to 8 × 10⁵ cells mL^-1 with a low detection limit of 20 cells mL^-1 (S/N = 3). The selectivity and specificity of this dual-potential ECL sensor showed good performance and indicated considerable promise in avoiding false-positive results in detection.

A Synergistic Coreactant for Single-Cell Electrochemiluminescence Imaging: Guanine-Rich ssDNA-Loaded High-Index Faceted Gold Nanoflowers

Developing an electrochemiluminescence (ECL) coreactant to minimize the biotoxicity and to maximize the enhancement factor is critical to single-cell ECL microscopy. Here, we reported a guanine-rich single-stranded DNA (G-ssDNA)-loaded high-index faceted gold nanoflower (Hi-AuNF) as a synergistic coreactant of Ru(bpy)₃²⁺ for single-cell ECL imaging. Because of the excellent catalytic performance and huge specific surface area, Hi-AuNF serves as not only an ECL enhancer but also a carrier for G-ssDNA. Guanine in G-ssDNA specifically reacts with Ru(bpy)₃²⁺ through a so-called "catalytic route" and thus significantly enhances the ECL signal of Ru(bpy)₃²⁺. To endow targeting ability to the synergistic coreactant, an aptamer of carcinoembryonic antigen (CEA) is incorporated into the G-ssDNA to form G-ssDNA-Apt for the recognition of human breast adenocarcinoma cells, which overexpress CEA on the cytomembrane. Accordingly, the ECL imaging of CEA on the cytomembrane was realized by using the highly selective Hi-AuNF@G-ssDNA-Apt as the probe as well as the luminophore of Ru(bpy)₃²⁺. Compared with the common coreactant tripropylamine with high toxicity and volatility, the Hi-AuNF@G-ssDNA-Apt is considered as a high-performance and biocompatible coreactant, providing exciting opportunities in single-cell imaging and detection.

Spatially Selective Imaging of Cell-Matrix and Cell-Cell Junctions by Electrochemiluminescence

Cell junctions are protein structures located at specific cell membrane domains that determine key processes in multicellular development. Here we report spatially selective imaging of cell junctions by electrochemiluminescence (ECL) microscopy. By regulating the concentrations of luminophore and/or co-reactant, the thickness of ECL layer can be controlled to match with the spatial location of different cell junctions. At a low concentration of luminophore, ECL generation is confined to the electrode surface, thus revealing only cell-matrix adhesions at the bottom of cells. While at a high concentration of luminophore, the ECL layer can be remarkably extended by decreasing the co-reactant concentration, thus allowing the sequential imaging of cell-matrix and cell-cell junctions at the bottom and near the apical surface of cells, respectively. This strategy not only provides new insights into the ECL mechanisms but also promises wide applications of ECL microscopy in bioimaging.

Electrogenerated chemiluminescence detection of single entities

Electrogenerated chemiluminescence, also known as electrochemiluminescence (ECL), is an electrochemically induced production of light by excited luminophores generated during redox reactions. It can be used to sense the charge transfer and related processes at electrodes via a simple visual readout; hence, ECL is an outstanding tool in analytical sensing. The traditional ECL approach measures averaged electrochemical quantities of a large ensemble of individual entities, including molecules, microstructures and ions. However, as a real system is usually heterogeneous, the study of single entities holds great potential in elucidating new truths of nature which are averaged out in ensemble assays or hidden in complex systems. We would like to review the development of ECL intensity and imaging based single entity detection and place emphasis on the assays of small entities including single molecules, micro/nanoparticles and cells. The current challenges for and perspectives on ECL detection of single entities are also discussed.

A potential-resolved electrochemiluminescence resonance energy transfer strategy for the simultaneous detection of neuron-specific enolase and the cytokeratin 19 fragment

An electrochemiluminescence resonance energy transfer (ECL-RET) immunosensor was developed based on the potential-resolved technology for the simultaneous detection of neuron-specific enolase (NSE) and the cytokeratin 19 fragment (CYFRA21-1). The absorption spectrum of gold nanorods (AuNRs) perfectly overlapped with the ECL spectra of SnS2@Pt and Ru(bpy)32+/Zn-MOF, so they exhibited an excellent ECL-RET effect with high efficiency. Zn-MOF possesses a large surface area, which allows for the loading of Ru(bpy)32+. This results in a signal probe of Ru(bpy)32+/Zn-MOF/Ab1 showing a strong ECL emission. Simultaneously, owing to the excellent electronic conductivity of PtNPs, they can increase the electron transfer rate between S2O82- and tin disulfide nanoflowers (SnS2NFs). Hence, the ECL signal of SnS2NFs can be enhanced. Under the optimal conditions, the linear range for NSE is 0.2 pg mL-1-20 ng mL-1 with a detection limit of 79 fg mL-1. The linear range for CYFRA21-1 is 1.25 pg mL-1-12.5 ng mL-1 with a detection limit of 0.43 pg mL-1. The proposed immunosensor can be used for the sensitive simultaneous detection of NSE and CYFRA21-1 in human serum and has promise for clinical diagnostics.

An electrochemiluminescence energy resonance transfer system for highly sensitive detection of brombuterol

In this work, an electrochemiluminescence resonance energy transfer (ECL-RET) system was established based on the modified graphite phase carbon nitride to detect brombuterol residues in food. The ultrasonic-assisted acidification exfoliation modification improved the conductivity and specific surface area of the graphite phase carbon nitride (g-C₃N₄). In addition, the carboxylated g-C₃N₄ nanosheets as ECL donors and the Au-Ag alloy nanoparticles as ECL acceptors could respectively directly carry antigen and antibody. Therefore, the trouble of introducing additional bridge molecules was avoided. A competitive immunoassay strategy was used for the detection of brombuterol, where brombuterol in the sample would compete with the coating antigen for the limited binding sites on antibody. The proposed ECL immunosensor for brombuterol detection exhibited high sensitivity with a wide linear range from 0.001 ng mL^-1 to 1000 ng mL^-1 and a low detection limit at 0.31 pg mL^-1. This work adopts a very simple way to design the sensor without losing its sensitivity, bringing convenience to its possible future applications.

Progress in electrochemiluminescence of nanoclusters: how to improve the quantum yield of nanoclusters

Classification of nanoclusters and methods to improve their quantum yield and applications.

Catalytic route electrochemiluminescence microscopy of cell membranes with nitrogen-doped carbon dots as nano-coreactants

Catalytic route electrochemiluminescence microscopy enables us to image upper cell membranes with a vertical resolution mode by using nitrogen-doped carbon dots as nano-coreactants and labels.

Recent developments in electrochemiluminescence nanosensors for cancer diagnosis applications

In recent years, electrochemiluminescence (ECL) nanosensing systems have undergone rapid development and made significant progress in ultrasensitive analysis and cell imaging. Because of the unique advantages of high selectivity, ultra-sensitivity, and good reproducibility, ECL nanosensors can open new paths for cancer diagnosis. With the development of ECL nanosensors, high-throughput analysis, visual detection and spatially resolved ECL imaging of single cells are being realized. The innovations of ECL nanosensors consist of electrochemical excitation, coreactant catalysis, light radiation and luminescence signal amplification, which involve several fields such as nanotechnology, catalysis, optics, and electrochemistry. The developments of ECL instruments also relate to imaging technology. Herein, we review the construction modes, sensing strategies and cancer diagnosis applications of ECL nanosenors. Firstly, the nano-components of the ECL sensing system are discussed. The construction and signal amplification methods of the nanosensing system are emphasized. Secondly, the high-efficiency cancer identification strategies are presented, including protein tumor marker detection, nucleic acid assay, cancer cell identification and exosome detection. The recent advances in representative examples of ECL nanosenors in cancer diagnosis are highlighted, including high-throughput ECL analysis, in situ assay, visual ECL detection, single-cell imaging diagnosis, and so on. Finally, the challenges are featured based on the recent development of the ECL nanosensing system in the clinical diagnosis. The ECL nanosensors provide effective and reliable analytical methods and open new paths for cancer diagnosis. It is noteworthy that the prospects of the ECL nanosensing system in clinical diagnosis are instructive to the developments of other nanosensor research.

Recent Advances in Electrochemiluminescence-Based Systems for Mammalian Cell Analysis

Mammalian cell analysis is essential in the context of both fundamental studies and clinical applications. Among the various techniques available for cell analysis, electrochemiluminescence (ECL) has attracted significant attention due to its integration of both electrochemical and spectroscopic methods. In this review, we summarize recent advances in the ECL-based systems developed for mammalian cell analysis. The review begins with a summary of the developments in luminophores that opened the door to ECL applications for biological samples. Secondly, ECL-based imaging systems are introduced as an emerging technique to visualize single-cell morphologies and intracellular molecules. In the subsequent section, the ECL sensors developed in the past decade are summarized, the use of which made the highly sensitive detection of cell-derived molecules possible. Although ECL immunoassays are well developed in terms of commercial use, the sensing of biomolecules at a single-cell level remains a challenge. Emphasis is therefore placed on ECL sensors that directly detect cellular molecules from small portions of cells or even single cells. Finally, the development of bipolar electrode devices for ECL cell assays is introduced. To conclude, the direction of research in this field and its application prospects are described.

Dual-Wavelength Electrochemiluminescence Ratiometric Biosensor for NF-κB p50 Detection with Dimethylthiodiaminoterephthalate Fluorophore and Self-Assembled DNA Tetrahedron Nanostructures Probe

In this work, we fabricated a dual-wavelength electrochemiluminescence ratiometric biosensor based on electrochemiluminescent resonance energy transfer (ECL-RET). In this biosensor, Au nanoparticle-loaded graphitic phase carbon nitride (Au-g-C₃N₄) as a donor and Au-modified dimethylthiodiaminoterephthalate (TAT) analogue (Au@TAT) as an acceptor were investigated for the first time. Besides, tetrahedron DNA probe was immobilized onto Au-g-C₃N₄ to improve the binding efficiency of the transcription factor and ECL ratiometric changes on the basis of the ratio of ECL intensities at 595 and 460 nm, which were obtained through the formation of a sandwich structure of DNA probe-antigen-antibody. Our biosensor achieved the assay of NF-κB p50 with a detection limit of 5.8 pM as well as high stability and specificity.

Electrogenerated Chemiluminescence Biosensing

This Feature simply introduces the history and mechanism of classical electrogenerated chemiluminescence (ECL) systems for the detection of biomolecules, highlights new advances and emerging fields of the ECL biosensing with recent illustrative examples, and presents the challenges and perspectives of ECL biosensing.

Synergistic bio-recognition/spatial-confinement for effective capture and sensitive photoelectrochemical detection of MCF-7 cells

A synergistic bio-recognition/spatial-confinement strategy is proposed for the effective capture of cancer cells and sensitive photoelectrochemical detection with the lowest limit of detection of 2 cells per mL.