Two-Dimensional Colloidal Nanocrystals

Preparation of Colloidal Cadmium Sulfoselenide Nanoplatelets from Alloyed Quantum Dots

We report a novel approach for synthesizing cadmium sulfoselenide nanoplatelets from alloyed quantum dots. The resulting nanoplatelets, with a zinc-blende crystal structure, display uniform morphology, sharp photoluminescence, and spatially homogeneous elemental distributions. Correlated analyses corroborate the evolution of cadmium sulfoselenide nanoplatelets derived from alloyed quantum dots prepared with selenium sulfide.

Structural diversity dependent cation incorporation into magnetic Cr-Se nanocrystals

Chromium selenide (Cr-Se)-based low-dimensional materials have attracted significant attention in spintronics because of their diverse structure- and composition-dependent magnetic properties. While significant progress has been made in fabricating the Cr-Se family of nanomaterials through techniques like chemical vapor deposition, the synthesis of Cr-Se nanocrystals (NCs) via colloidal methods remains underexplored. In this work, we demonstrate the robust colloidal synthesis approach for producing Cr2Se3 and Cr3Se4 NCs with distinct morphologies by varying the Cr precursors and ligands. Cr-Se NCs can serve as templates for cation exchange (CE) reactions involving monovalent Cu+ and Ag+, divalent Zn2+ and Cd2+, and trivalent In3+, facilitating the creation of a diverse library of metal selenide NCs and nanoheterostructures. Our findings highlight how the outcomes of CE reactions are influenced by the structure of various Cr-Se phases. Furthermore, the magnetic properties of the as-synthesized Cr-Se NCs and their derivative CuCrSe2 were investigated. Our work provides a robust synthesis route for the Cr-Se class of magnetic nanomaterials and a platform for creating a diverse range of functional metal selenide NCs via CE reactions.

Strong Coupling between Mn2+ Dopants and CdSe Nanoplatelets Enables Charge-Transfer Transition and Dual Emission

Doping transitional metals into colloidal nanocrystals can significantly modify their excited-state dynamics and enrich their optical and magneto-optical functionalities. Here we synthesize Mn-doped CdSe nanoplatelets and investigate their excited-state dynamics and light-emission mechanisms. Extensive characterizations suggest that Mn2+ ions are situated near the surface-region of the nanoplatelets. The atomic thinness of nanoplatelets allows for a strong host-dopant coupling, manifested as broadband charge-transfer absorption and emission (near 575 nm) between the host valence band and the dopant d-orbitals. Photoexcitation of the host leads to rapid (a few ps) electron transfer from the conduction band to the d-orbitals, and the resultant charge-transfer state decays within a few ns not only through charge-transfer emission but also generating an excited-state species (likely Mn-Mn dimer) with a characteristic near-infrared emission. These novel photophysics and photochemistry uncovered for quasi-two-dimensional Mn-doped nanocrystals form the basis for optical, magneto-optical, and energy conversion applications using such materials.

High-Performance Green and Blue Light-Emitting Diodes Enabled by CdZnSe/ZnS Core/Shell Colloidal Quantum Wells

The unique anisotropic properties of colloidal quantum wells (CQWs) make them highly promising as components in nanocrystal-based devices. However, the limited performance of green and blue light-emitting diodes (LEDs) based on CQWs has impeded their practical applications. In this study, alloy CdZnSe core CQWs with precise compositions are tailored via direct cation exchange (CE) from CdSe CQWs with specific size, shape, and crystal structure and utilized hot-injection shell (HIS) growth to synthesize CdZnSe/ZnS core/shell CQWs exhibiting exceptional optoelectronic characteristics. This approach enabled the successful fabrication green and blue LEDs manifesting superior performance compared to previously reported solution-processed CQW-LEDs. The devices demonstrated a remarkable peak external quantum efficiency (20.4% for green and 10.6% for blue), accompanied by a maximum brightness 347,683 cd m-2 for green and 38,063 cd m-2 for blue. The high-performance represents a significant advancement for nanocrystal-based light-emitting diodes (Nc-LEDs) incorporating anisotropic nanocrystals. This work provides a comprehensive synthesis strategy for enhancing the efficiency of Nc-LEDs utilizing anisotropic nanocrystals.

Triangular-shaped Cu-Zn-In-Se-based nanocrystals with narrow near infrared photoluminescence

Tunable optical properties exhibited by semiconductor nanocrystals (NCs) in the near infrared (NIR) spectral region are of particular interest in various applications, such as telecommunications, bioimaging, photodetection, photovoltaics, etc. While lead and mercury chalcogenide NCs do exhibit exemplary optical properties in the NIR, Cu-In-Se (CISe)-based NCs are a suitable environment-friendly alternative to these toxic materials. Several reports of NIR-emitting (quasi)spherical CISe NCs have been published, but their more complex-shaped counterparts remain rather less explored. The emerging anisotropic nanomaterials have gained significant interest owing to their unique optical properties arising due to their specific shape. While several examples of non-spherical Cu-In-S-based NCs have been reported, examples of CISe-based anisotropic NCs are rather scarce, and those with intensive photoluminescence (PL) are not yet developed. In this work, we present a one-pot approach to synthesize quaternary Cu-Zn-In-Se (CZISe) triangular NCs with intensive PL in the NIR region. The NCs synthesized exhibit tetragonal crystal structure and, depending on the reaction conditions, are single triangular particles or stacks of triangular blocks of varied lateral sizes but rather uniform thickness. The synthesis involves the formation of In2Se3 seeds with subsequent incorporation of copper and growth of triangular CISe NCs, followed by the incorporation of zinc and the growth of a ZnS shell. Importantly, the PL band widths of the final core/shell heterostructured NCs are narrow, down to 102 meV, which is a rarely observed characteristic for this class of materials and can be attributed to their anisotropic shape and the absence of thickness and compositional inhomogeneities of their building blocks. The PL of the CZISe/ZnS NCs can be tuned in the range of 1082-1218 nm reaching a quantum yield of up to 40% by varying their size and composition. To the best of our knowledge, this is the farthest and the narrowest PL achieved for CISe-based NCs so far, which widens application perspectives of this material in NIR LEDs, bioimaging, and photovoltaics.

High-Density and Well-Aligned Hierarchical Structures of Colloids Assembled under Orthogonal Magnetic and Electric Fields

Colloids can be used either as model systems for directed assembly or as the necessary building blocks for making functional materials. Previous work primarily focused on assembling colloids under a single external field, where controlling particle-particle interactions is limited. This work presents results under a combination of electric and magnetic fields. When these two fields are orthogonally applied, we can independently tune the magnitude and direction of the dipolar attraction and repulsion between the particles. As a result, we obtain well-aligned, highly dense, but individually separated linear chains at intermediate particle concentrations. Both the inter- and intrachain spacings can be tuned by adjusting the particle concentration and relative strengths of both fields. At high particle concentrations and by tuning the electric field frequency, the individual microspheres can assemble into colloidal oligomers such as trimers, tetramers, heptamers, and nonamers in response to the electric field due to the synergy between dipolar and electrohydrodynamic interactions. These oligomers, in turn, serve as building blocks for making hierarchical structures with finer architectures upon superimposing a one-dimensional (1D) magnetic field. In addition to experiments, Monte Carlo (MC) simulations have been performed on colloids confined near the electrode, interacting through a Stockmayer-like potential. They faithfully reproduce key observations in the experiments. Our work demonstrates the potential of using orthogonal electric and magnetic fields to assemble diversified types of highly aligned structures for applications in high-strength composites, optical materials, or structured battery electrodes.

Blue CdSe/CdS core/crown nanoplatelet light-emitting diodes obtained via a design-of-experiments approach

Obtaining efficient blue emission from CdSe nanoplatelets (NPLs) remains challenging due to charge trapping and sub-bandgap emission. Thanks to a design-of-experiments (DoE) approach, we significantly improved the NPL synthesis, obtaining precise control over the lateral aspect ratio (length/width). We raised the photoluminescence quantum efficiency up to 66% after growth of a CdS crown, with complete elimination of trap-state emission. Using these 3.5 monolayer, blue-emitting CdSe/CdS core/crown NPLs (λ = 460 nm), we fabricated light-emitting diodes (LEDs) with narrowband (16 nm) blue electroluminescence, an external quantum efficiency of 1.3% and low turn-on voltage of 2.9 V after DoE optimization. Our findings show that NPLs are a promising system to obtain LEDs that emit a saturated blue color.

The Growth and Shape Evolution of Indium Nanoplates Studied by In Situ Liquid Cell TEM

Understanding the growth mechanisms of nanomaterials is crucial for effectively controlling their morphology which may affect their properties. Here, the growth process of indium nanoplates is studied using in situ liquid cell transmission electron microscopy. Quantitative analysis shows that the growth of indium nanoplate is limited by surface reaction. Besides, the growth process has two stages, which is different from that of other metal nanoplates reported previously. At the first stage, indium particles transform gradually from face-centered cubic to body-centered tetragonal (bct) structure as the seeds grow. At the second stage, the seeds grow faster than at the first stage and form indium triangular nanoplates. Indium triangular nanoplates have a bct structure with {011}-twin, which is found to form through kinetic reactions. In addition, the shape evolution of truncated triangle nanoplate with multiple twin planes is studied. The growth rate of truncated edge changes with the varied number of re-entrant grooves. The present work provides valuable insights into the growth mechanism of metal nanoplates with low-symmetric structure and the role of twin planes in the shape evolution of plate-like metal nanomaterials.

Atomic-Level Structure of the Organic-Inorganic Interface of Colloidal ZnO Nanoplatelets from Dynamic Nuclear Polarization-Enhanced NMR

Colloidal semiconductor nanoplatelets (NPLs) have emerged as a new class of nanomaterials that can exhibit substantially distinct optical properties compared to those of isotropic quantum dots, which makes them prime candidates for new-generation optoelectronic devices. Insights into the structure and anisotropic growth of NPLs can offer a blueprint for their controlled fabrication. Here, we present an atomic-level investigation of the organic-inorganic interface structure in ultrathin and stable benzamidine (bza)-supported ZnO NPLs prepared by the modified one-pot self-supporting organometallic approach. High-resolution transmission electron microscopy analysis showed a well-faceted hexagonal shape of ZnO NPLs with lateral surfaces terminated by nonpolar (101̅0) facets. The basal surfaces are flat and well-formed on one side and corrugated on the other side, which indicates that the layer-by-layer growth in the thickness of the NPLs likely occurs only in one direction via the expansion of 2D islands on the surface. The ligand coordination modes were elucidated using state-of-the-art dynamic nuclear polarization (DNP)-enhanced solid-state NMR spectroscopy supported by density functional theory chemical shift calculations. Specifically, it was found that (101̅0) nonpolar facets are stabilized by neutral L-type bza-H ligands with hydrogen bond-supported η1-coordination mode, while polar (0001) and (0001̅) facets are covered by μ2-coordinated X-type anionic bza ligands with different conformations of aromatic rings. Moreover, the ligand packing on (101̅0) lateral facets was determined using 13C natural abundance (∼1.1%) homonuclear dipolar correlation experiments. Overall, an in-depth understanding of the growth mechanism and the unique bimodal X-type/L-type ligand coordination shell of ZnO NPLs is provided, which will facilitate further design of anisotropic nano-objects.

Demystifying Trion Emission in CdSe Nanoplatelets

At cryogenic temperatures, the photoluminescence spectrum of CdSe nanoplatelets (NPLs) usually consists of multiple emission lines, the origin of which is still under debate. While there seems to be consensus that both neutral excitons and trions contribute to the NPL emission, the prominent role of trions is rather puzzling. In this work, we demonstrate that Förster resonant energy transfer in stacks of NPLs combined with hole trap states in specific NPLs within the stack trigger trion formation, while single NPL spectra are dominated by neutral excitonic emission. This interpretation is verified by implementing copper (Cu+) dopants into the lattice as intentional hole traps. Trion emission gets strongly enhanced, and due to the large amount of hole trapping Cu+ states in each single NPL, trion formation does not necessarily require stacking of NPLs. Thus, the ratio between trion and neutral exciton emission can be controlled by either changing the amount of stacked NPLs during sample preparation or implementing copper dopants into the lattice which act as additional hole traps.

Introducing Ag Dopants into CdSe Nanoplatelets (NPLs) Leads to Effective Charge Separation for Better Photodetector Performance

Solution-processed colloidal cadmium chalcogenide nanoplatelets (NPLs)-based photodetectors (PD) are promising materials for next-generation optoelectronic devices due to their excellent optical properties. Here, we report on ultrafast carrier relaxation dynamics of four monolayer (4 ML) Ag-doped CdSe (Ag: CdSe) NPLs using ultrafast transient absorption spectroscopy and their photodetectors applications. A broad dopant emission is observed at around 650 nm with a large FWHM of ~431 meV and band edge emission at 515 nm. The intragap dopant state acts as a hole acceptor, which leads to better charge separation. The ultrafast transient absorption spectroscopy study shows faster carrier recombination dynamics with a hole transfer time scale of ~10 ps in Ag-doped CdSe NPLs. This supports the excited hole capture phenomenon at the dopant state. Ag-doped CdSe NPLs-based PD performed better than undoped CdSe NPLs with detectivity and responsivity values of 1.3×1010 Jones and 2.4 mA/W, respectively.

Colloidal synthesis of two-dimensional nanocrystals by the polyol route

The field of 2D nanomaterials is ever-growing with a myriad of synthetic advancements that have been used to obtain such materials. There are top-down, as well as bottom-up, fabrication methods for obtaining 2D nanomaterials; however, synthesis of 2D nanomaterials from solution offers a simple scalable way to control size, shape, and surface. This review outlines the recent advances in colloidal polyol synthesis of 2D nanomaterials and provides perspectives on the similarities and differences in various syntheses. Various materials classes are presented and discussed, including metals, oxides, chalcogenides, and halides, that can be synthesized as 2D nanomaterials via a polyol process. Throughout the literature, polyol media is demonstrated to be versatile not only as a solvent and reducing agent for metal precursors but also as a binding and shape-directing agent for many 2D nanomaterials. Polyols also offer the ability to dissolve various surfactants and additives that can further control the morphology and composition of various nanomaterials. In this review, we outline the various 2D materials that have been realized via the solution polyol route.

Solution Synthesis of NdTe3 Magnetic Nanosheets

Neodymium tritelluride is a layered van der Waals material, with correlated electronic properties including high electronic mobility, charge density waves, and antiferromagnetism. We developed a solution synthesis method to form free-standing nanosheets of NdTe3, with nanosheet lateral dimensions of 200-400 nm. The morphology of the nanosheet was influenced by the neodymium precursor. When Nd[(N(SiMe3)2]3 was used as the metal source the nanosheet thickness average was 12 ± 2.5 nm, alternatively the combination of NdCl3 and Li(N(SiMe3)2) led to thicker nanosheets, approximately 19 ± 2.4 nm. We believe that the difference in thickness and changes in surface chemistry point to the role of chloride in accelerating nanocrystal growth for the synthesis with NdCl3 (and Li(N(SiMe3)2). Both types of nanosheets exhibit charge density wave (CDW) distortions as measured using electron diffraction and investigated using variable temperature Raman scattering. Interestingly, the magnetic studies suggest a distinct change in properties between 12 and 19 nm thickness in antiferromagnetic NdTe3.

Direct Synthesis of Zinc-Blende ZnSe Nanoplatelets

The distinct optical properties and electronic structures of two-dimensional colloidal nanoplatelets (NPLs) have garnered significant scientific and practical interest. However, concerns regarding the toxicity of cadmium-based NPLs and their limited spectral coverage show the importance of developing nontoxic alternatives. In this study, we devised a new synthetic approach for the direct synthesis of zinc-blende (ZB) ZnSe NPLs. By introducing two different zinc precursors, short-chain metal carboxylate- zinc acetate, and metal halide-zinc chloride, we successfully synthesized two-dimensional ZB ZnSe NPLs. By modifying the reaction parameters, we obtained two different populations of ZnSe NPLs, characterized by the first absorption peak at "343" and "367 nm". Ostwald ripening experiments further confirmed the formation of 2D ZnSe NPLs by the observed discrete growth mechanism. Lastly, we investigated the impact of surface ligands on the excitonic properties of ZB ZnSe NPLs by treating their initially carboxylic acid-capped surface with oleylamine. Remarkably, we observed significant red-shifting in the first excitonic peaks, up to 130 meV, in a reversible manner, demonstrating further tunability of excitonic features in ZnSe NPLs. We anticipate that our findings will serve as a catalyst for further exploration of nontoxic two-dimensional materials, fostering their investigation and application in various fields.

Synthesis of Au@Ag core-shell nanocubes with finely tuned shell thicknesses for surface-enhanced Raman spectroscopic detection

In this work, we describe a facile method for generating monodisperse Au@Ag core-shell nanocubes with well-controlled size and fine-tuned Ag shell thicknesses. In this synthesis method, Au nanocubes were prepared via the seed-mediated growth method. Then, Au@Ag nanocubes with the core-shell structure were prepared separately by reducing AgNO3 with AA using as-prepared Au nanocubes as seeds. The thickness of Ag shells could be finely tuned from 3.6 nm to 10.0 nm by varying the concentration of the AgNO3 precursor. By investigating the localized surface plasmon resonance (LSPR) properties of Au@Ag nanocubes in relation to the thickness of the Ag shell, we found that the intensity of the characteristic peak of Ag gradually increases and that of Au gradually decreases as the thickness of the Ag shell increases. Additionally, surface-enhanced Raman scattering (SERS) properties of Au@Ag core-shell nanocubes were evaluated using rhodamine 6G (R6G) as the probe molecule. Interestingly, Au@Ag nanocubes exhibit efficient SERS intensities compared to the Au nanocubes, and Ag shell with a thickness of about 8.4 nm exhibits the optimal SERS activity. In addition, our results also demonstrated that Au@Ag nanocubes with an Ag shell thickness of 8.4 nm exhibited high SERS sensitivity and are capable of probing the analyte down to 10-12 M. The results obtained here suggest that Au@Ag core-shell nanocubes might serve as a nanoprobe for SERS-based analytical and biosensing applications.

Colloidal 2D Mo1-xWxS2 nanosheets: an atomic- to ensemble-level spectroscopic study

Composition dependent tuning of electronic and optical properties in semiconducting two-dimensional (2D) transition metal dichalcogenide (TMDC) alloys is promising for tailoring the materials for optoelectronics. Here, we report a solution-based synthesis suitable to obtain predominantly monolayered 2D semiconducting Mo1-xWxS2 nanosheets (NSs) with controlled composition as substrate-free colloidal inks. Atomic-level structural analysis by high-angle annular dark-field (HAADF) scanning transmission electron microscopy (STEM) coupled with energy dispersive X-ray spectroscopy (EDXS) depicts the distribution of individual atoms within the Mo1-xWxS2 NSs and reveals the tendency for domain formation, especially at low molar tungsten fractions. These domains cause a broadening in the associated ensemble-level Raman spectra, confirming the extrapolation of the structural information from the microscopic scale to the properties of the entire sample. A characterization of the Mo1-xWxS2 NSs by steady-state optical spectroscopy shows that a band gap tuning in the range of 1.89-2.02 eV (614-655 nm) and a spin-orbit coupling-related exciton splitting of 0.16-0.38 eV can be achieved, which renders colloidal methods viable for upscaling low cost synthetic approaches toward application-taylored colloidal TMDCs.

Anisotropic Growth of Covalent Inorganic Complexes to Nanoplatelets

Colloidal II-VI semiconductor nanoplatelets (NPLs) provide a new platform in material science due to their unique growth mode and advanced optical properties. However, in contrast to the rapid development of zinc blend structured NPLs, studies on the formation of wurtzite (WZ) NPLs have been limited to the lamellar assembly of specific magic-sized nanoclusters (MSCs). Therefore, the study of new precursors is important for enriching the synthesis strategy, improving the study of two-dimensional (2D) nanocrystal growth mechanisms, and constructing complex nanostructures. Here, we demonstrated that covalent inorganic complexes (CICs), as novel functional intermediates, can be directly used to form NPLs without involving MSCs. Using in situ absorption spectra, we demonstrated that the evolution followed a pseudo-first-order kinetics (kobs = 0.02 min-1 (t1/2 = 34.7 min)). Several types of binary WZ NPLs, including CdSe, CdS, CdTe, and ZnS, have been directly prepared based on this mechanism through the anisotropic growth of CICs. In addition, CICs can also be used to prepare Mn-doped CdSe NPLs. The present study not only affords new precursors for the synthesis of WZ NPLs but also advances our understanding of the synthesis mechanism of nanocrystals.

High-Throughput Computational Screening of Solid-Binding Peptides

Inspired by biomineralization, a naturally occurring, protein-facilitated process, solid-binding peptides (SBPs) have gained much attention for their potential to fabricate various shaped nanocrystals and hierarchical nanostructures. The advantage of SBPs over other traditionally used synthetic polymers or short ligands is their tunable interaction with the solid material surface via carefully programmed sequence and being solution-dependent simultaneously. However, designing a sequence with targeted binding affinity or selectivity often involves intensive processes such as phage display, and only a limited number of sequences can be identified. Other computational efforts have also been introduced, but the validation process remains prohibitively expensive once a suitable sequence has been identified. In this paper, we present a new model to rapidly estimate the binding free energy of any given sequence to a solid surface. We show how the overall binding of a polypeptide can be estimated from the free energy contribution of each residue based on the statistics of the thermodynamically stable structure ensemble. We validated our model using five silica-binding peptides of different binding affinities and lengths and showed that the model is accurate and robust across a wider range of chemistries and binding strengths. The computational cost of this method can be as low as 3% of the commonly used enhanced sampling scheme for similar studies and has a great potential to be used in high-throughput algorithms to obtain larger training data sets for machine learning SBP screening.

Tuning the Inter-Nanoplatelet Distance and Coupling Strength by Thermally Induced Ligand Decomposition

CdSe nanoplatelets (NPLs) are promising 2D semiconductors for optoelectronic applications, in which efficient charge transport properties are desirable. It is reported that thermal annealing constitutes an effective strategy to control the optical absorption and electrical properties of CdSe NPLs by tuning the inter-NPL distance. Combining optical absorption, transmission electron microscopy, and thermogravimetric analysis, it is revealed that the thermal decomposition of ligands (e.g., cadmium myristate) governs the inter-NPL distance and thus the inter-NPL electronic coupling strength. Employing ultrafast terahertz spectroscopy, it is shown that this enhanced electronic coupling increases both the free carrier generation efficiency and the short-range mobility in NPL solids. The results show a straightforward method of controlling the interfacial electronic coupling strength for developing functional optoelectronic devices through thermal treatments.

Randomly Layered Superstructure of In2O3 Truncated Nano-Octahedra and Its High-Pressure Behavior

This study outlines the preparation and characterization of a unique superlattice composed of indium oxide (In2O3) vertex-truncated nano-octahedra, along with an exploration of its response to high-pressure conditions. Transmission electron microscopy and scanning transmission electron microscopy were employed to determine the average circumradius (15.2 nm) of these vertex-truncated building blocks and their planar superstructure. The resilience and response of the superlattice to pressure variations, peaking at 18.01 GPa, were examined using synchrotron-based wide-angle X-ray scattering (WAXS) and small-angle X-ray scattering (SAXS) techniques. The WAXS data revealed no phase transitions, reinforcing the stability of the 2D superlattice composed of random layers in alignment with a p31m planar symmetry as discerned by SAXS. Notably, the SAXS data also unveiled a pressure-induced, irreversible translation of octahedra and ligand interaction occurring within the random layer. Through our examination of these pressure-sensitive behaviors, we identified a distinctive translation model inherent to octahedra and observed modulation of the superlattice cell parameter induced by pressure. This research signifies a noteworthy advancement in deciphering the intricate behaviors of 2D superlattices under a high pressure.

A tight-binding model for illustrating exciton confinement in semiconductor nanocrystals

The Brus equation describes the relation between the lowest energy of an electron-hole pair and the size of a semiconductor crystallite. However, taking the strong confinement regime as a starting point, the equation does not cover the transition from weak to strong confinement, the accompanying phenomenon of charge-carrier delocalization, or the change in the transition dipole moment of the electron-hole pair state. Here, we use a one-dimensional, two-particle Hubbard model for interacting electron-hole pairs that extends the well-known tight-binding approach through a point-like electron-hole interaction. On infinite chains, the resulting exciton states exhibit the known relation between the Bohr radius, the exciton binding energy, and the effective mass of the charge carriers. Moreover, by introducing infinite-well boundary conditions, the model enables the transition of the exciton states from weak to strong confinement to be tracked, while straightforward adaptations provide insights into the relation between defects, exciton localization, and confinement. In addition, by introducing the dipole operator, the variation of the transition dipole moment can be mapped when shifting from electron-hole pairs in strong confinement to delocalized and localized excitons in weak confinement. The proposed model system can be readily implemented and extended to different multi-carrier states, thus providing researchers a tool for exploring, understanding, and teaching confinement effects in semiconductor nanocrystals under different conditions.

Selenium reduction pathways in the colloidal synthesis of CdSe nanoplatelets

Several established procedures are now available to prepare zinc blende CdSe nanoplatelets. While these protocols allow for detailed control over both thickness and lateral dimensions, the chemistry behind their formation is yet to be unraveled. In this work, we discuss the influence of the solvent on the synthesis of nanoplatelets. We confirmed that the presence of double bonds, as is the case for 1-octadecene, plays a key role in the evolution of nanoplatelets, through the isomerization of the alkene, as confirmed by nuclear magnetic resonance spectroscopy and mass spectrometry. Consequently, 1-octadecene can be replaced as a solvent (or solvent mixture), however, only by one that also contains α protons to CC double bonds. We confirm this via synthesis of nanoplatelets in hexadecane spiked with a small amount of 1-octadecene, and in the aromatic solvent 1,2,3,4-tetrahydronaphthalene (tetralin). At the same time, the chemical reaction leading to the formation of nanoplatelets occurs to some extent in saturated solvents. A closer examination revealed that an alternative formation pathway is possible, through interaction of carboxylic acids, such as octanoic acid, with selenium. Next to shedding more light on the synthesis of CdSe nanoplatelets, fundamental understanding of the precursor chemistry paves the way to use optimized solvent admixtures as an additional handle to control the nanoplatelet synthesis, as well as to reduce potential self-polymerization hurdles observed with 1-octadecene.

Customized Synthesis of MOF Nanoplates via Molecular Scalpel Strategy for Efficient Oxygen Reduction in Zn-Air Batteries

The production of metal-organic framework (MOF) nanoplates with well-defined geometric morphology is remarkable for expanding their applications. Herein, the cobalt-based MOF nanoplates with hexagonal channels from a layer-pillared MOF are accomplished, via a molecular scalpel strategy, utilizing monodentate pyridine to replace the bidentate 4,4'-bipyridine. The morphology can be modified from nanorods to nanoplates with controllable thickness tuned by the amounts of pyridine. Succeeding carbonization treatment transforms the MOF nanoplates into Co particles homogeneously encapsulated in the nitrogen-doped carbon layers. The prepared catalyst with a unique platelike morphology displays a high half-wave potential of 0.88 V in oxygen reduction reaction. When used in primary Zn-air batteries, it delivers a high peak power density of 280 mW cm-2 . This work clarifies the structure-morphology-reactivity connection of MOF nanoplates.

Prolate spheroidal polystyrene nanoparticles: matrix assisted synthesis, interface properties, and scattering analysis

Shape-anisotropic colloids are increasingly attracting attention for the fabrication of nano- and mesostructured materials. Polymer-based prolate spheroids are typically accessible through a two-step fabrication procedure comprising the synthesis of monodisperse particles of initially spherical shape and their stretching into elongated, ellipsoidal-like objects. The particle stretching is conducted within a matrix polymer, most commonly polyvinylalcohol, which allows heating beyond the glass transition temperature of the polymer particles, e.g. polystyrene. Here, we investigate various aspects of the synthesis and their consequences for the resulting colloids. Loading the stretching matrix with a high amount of polymer particles results in small particle clusters, which are separated during the mechanical stretching step. At the same time, the matrix polymer physisorbs at the particle surface which can be removed via a rigorous work-up procedure. Overall, this process allows for a precise adjustment of the aspect ratio of the prolate spheroids with a small size distribution and retained electrostatic stabilization. We analyse these particles with a range of microscopic and scattering techniques, including depolarized dynamic light scattering that gives access to the rotational diffusion coefficients.

Covalent inorganic complexes enabled zinc blende to wurtzite phase changes in CdSe nanoplatelets

Phase changes in colloidal semiconductor nanocrystals (NCs) are essential in material design and device applications. However, the transition pathways have yet to be sufficiently studied, and a better understanding of the underlying mechanisms is needed. In this work, a complete ligand-assisted phase transition from zinc blende (ZB) to wurtzite (WZ) is observed in CdSe nanoplatelets (NPLs). By monitoring with in situ absorption spectra along with electrospray ionization mass spectrometry (ESI-MS), we demonstrated that the transition process is a ligand-assisted covalent inorganic complex (CIC)-mediated phase transition pathway, which involves three steps, ligand exchange on ZB CdSe NPLs (Step 1), dissolution of NPLs to form CICs (Step 2), and conversion of CdSe-CIC assemblies to WZ CdSe NPLs (Step 3). In particular, CICs can be directly anisotropically grown to WZ CdSe NPL without other intermediates, following pseudo-first-order kinetics (kobs = 9.17 × 10-5 s-1). Furthermore, we demonstrated that CICs are also present and play an essential role in the phase transition of ZnS NPLs from WZ to ZB structure. This study proposes a new crystal transformation pathway and elucidates a general phase-transition mechanism, facilitating precise functional nanomaterial design.

Synthesis of graded CdS1-xSex nanoplatelet alloys and heterostructures from pairs of chalcogenoureas with tailored conversion reactivity

A mixture of N,N,N'-trisubstituted thiourea and cyclic N,N,N',N'-tetrasubstituted selenourea precursors were used to synthesize three monolayer thick CdS1-xSex nanoplatelets in a single synthetic step. The microstructure of the nanoplatelets could be tuned from homogeneous alloys, to graded alloys to core/crown heterostructures depending on the relative conversion reactivity of the sulfur and selenium precursors. UV-visible absorption and photoluminescence spectroscopy and scanning transmission electron microscopy electron energy loss spectroscopy (STEM-EELS) images demonstrate that the elemental distribution is governed by the relative precursor conversion kinetics. Slow conversion kinetics produced nanoplatelets with larger lateral dimensions, behavior that is characteristic of precursor conversion limited growth kinetics. Across a 10-fold range of reactivity, CdS nanoplatelets have 4× smaller lateral dimensions than CdSe nanoplatelets grown under identical conversion kinetics. The difference in size is consistent with a rate of CdSe growth that is 4× greater than the rate of CdS. The influence of the relative sulfide and selenide growth rates, the duration of the nucleation phase, and the solute composition on the nanoplatelet microstructure are discussed.

Selective Formation of Monodisperse Right Trigonal-Bipyramidal and Cube-Shaped CdSe Nanocrystals: Stacking Faults and Facet-Ligand Pairing

Formation of monodisperse right trigonal-bipyramidal (rTriBP) and cube-shaped CdSe nanocrystals─both being encased with six (100) facets─is found to be dictated by type of stacking faults along the (111) direction of the zinc-blende structure and an ideal facet-ligand pairing for the (100) facets. During growth with little kinetic overdriving, seeds with single twin boundary (TB) and single intrinsic stacking fault (ISF) grow into rTriBP and cube-shaped nanocrystals, respectively, through two consecutive stages. During the facet-formation stage, each seed would grow rapidly into the smallest faceted one to contain the ∼3 nm seed, with cube-shaped ones growing much faster than rTriBP ones because of the stacking-fault-dependent seed location in the final faceted nanocrystals. In the following facet-growth stage, cube-shaped nanocrystals also grow faster, presumably due to the highly reactive stacking fault edges. Consistent with this hypothesis, growth of rTriBP nanocrystals can become faster than that of cube-shaped ones by intentionally introducing additional intrinsic stacking fault(s) in the seeds. Cube-shaped and rTriBP CdSe nanocrystals exhibit distinctive optical properties, representing two classes of optical materials.

Transition Metal Ions Influence the Performance of Photodetector of Two-Dimensional CdS Nanoplatelets

Transition metal-doped two-dimensional (2D) semiconductor nanoplatelets (NPLs) with atomically precise thickness have attracted much research interest due to their inherent photo-physical properties. In this work, we have synthesized 2D Cu-doped CdS NPLs, investigated the charge transfer dynamics using ultrafast transient absorption spectroscopy, and fabricated an efficient photodetector device. A large Stoke's shifted emission at ~685 nm with an average lifetime of about ~1.45 μs is observed in Cu-doped CdS NPLs. Slower bleach recovery kinetics leads to large charge carrier separation in Cu-doped NPLs which is beneficial for photodetector applications. Cu-doped NPLs-based photodetectors exhibit high photocurrent, fast response (~120 ms), ~600 times higher photoresponsivity, and ~300 times higher detectivity (~4.1×1013 Jones) than undoped CdS NPLs. These excellent properties of Cu-doped CdS NPLs make this material an efficient alternative for next-generation optoelectronic devices.

Possibility of Exciton Bose-Einstein Condensation in CdSe Nanoplatelets

The quasi-two-dimensional exciton subsystem in CdSe nanoplatelets is considered. It is theoretically shown that Bose-Einstein condensation (BEC) of excitons is possible at a nonzero temperature in the approximation of an ideal Bose gas and in the presence of an "energy gap" between the ground and the first excited states of the two-dimensional exciton center of inertia of the translational motion. The condensation temperature (Tc) increases with the width of the "gap" between the ground and the first excited levels of size quantization. It is shown that when the screening effect of free electrons and holes on bound excitons is considered, the BEC temperature of the exciton subsystem increases as compared to the case where this effect is absent. The energy spectrum of the exciton condensate in a CdSe nanoplate is calculated within the framework of the weakly nonideal Bose gas approximation, considering the specifics of two-dimensional Born scattering.

Controlled Assembly of CdSe Nanoplatelet Thin Films and Nanowires

We assemble semiconductor CdSe nanoplatelets (NPs) at the air/liquid interface into 2D monolayers several micrometers wide, distinctly displaying nematic order. We show that this configuration is the most favorable energetically and that the edge-to-edge distance between neighboring NPs can be tuned by ligand exchange without disrupting film topology and nanoparticle orientation. We explore the rich assembly phase space by using depletion interactions to direct the formation of 1D nanowires from stacks of NPs. The improved control and understanding of the assembly of semiconductor NPs offers opportunities for the development of cheaper optoelectronic devices that rely on 1D or 2D charge delocalization throughout the assembled monolayers and nanowires.

Optical properties of NIR photoluminescent PbS nanocrystal-based three-dimensional networks

The assembly of nanocrystals (NCs) into three-dimensional network structures is a recently established strategy to produce macroscopic materials with nanoscopic properties. These networks can be formed by the controlled destabilization of NC colloids and subsequent supercritical drying to obtain NC-based aerogels. Even though this strategy has been used for many different semiconductor NCs, the emission of NC-based aerogels is limited to the ultraviolet and visible and no near-infrared (NIR) emitting NC-based aerogels have been investigated in literature until now. In the present work we have optimized a gelation route of NIR emitting PbS and PbS/CdS quantum dots (QDs) by means of a recently established gel formation method using trivalent ions to induce the network formation. Thereby, depending on the surface ligands and QDs used the resulting network structure is different. We propose, that the ligand affinity to the nanocrystal surface plays an essential role during network formation, which is supported by theoretical calculations. The optical properties were investigated with a focus on their steady-state and time resolved photoluminescence (PL). Unlike in PbS/CdS aerogels, the absorption of PbS aerogels and their PL shift strongly. For all aerogels the PL lifetimes are reduced in comparison to those of the building blocks with this reduction being especially pronounced in the PbS aerogels.

Optical Alignment and Optical Orientation of Excitons in CdSe/CdS Colloidal Nanoplatelets

Optical alignment and optical orientation of excitons are studied experimentally on an ensemble of core/shell CdSe/CdS colloidal nanoplatelets. Linear and circular polarization of photoluminescence during resonant excitation of excitons is measured at cryogenic temperatures and with magnetic fields applied in the Faraday geometry. The developed theory addresses the optical alignment and optical orientation of excitons in colloidal nanocrystals, taking into account both bright and dark exciton states in the presence of strong electron-hole exchange interaction and the random in-plane orientation of nanoplatelets within the ensemble. Our theoretical analysis of the obtained experimental data allows us to evaluate the exciton fine structure parameters, the g-factors, and the spin lifetimes of the bright and dark excitons. The optical alignment effect enables the identification of the exciton and trion contributions to the emission spectrum, even in the absence of their clear separation in the spectra.

Surfactant assisted exfoliation of near infrared fluorescent silicate nanosheets

Fluorophores that emit light in the near infrared (NIR) are advantageous in photonics and imaging due to minimal light scattering, absorption, phototoxicity and autofluorescence in this spectral region. The layered silicate Egyptian blue (CaCuSi₄O₁₀) emits as a bulk material bright and stable fluorescence in the NIR and is a promising NIR fluorescent material for (bio)photonics. Here, we demonstrate a surfactant-based (mild) exfoliation procedure to produce nanosheets (EB-NS) of high monodispersity, heights down to 1 nm and diameters <20 nm in large quantities. The approach combines planetary ball milling, surfactant assisted bath sonication and centrifugation steps. It avoids the impurities that are typical for the harsh conditions of tip-sonication. Several solvents and surfactants were tested and we found the highest yield for sodium dodecyl benzyl sulfate (SDBS) and water. The NIR fluorescence emission (λ_em ≈ 930-940 nm) is not affected by this procedure, is extremely stable and is not affected by quenchers. This enables the use of EB-NS for macroscopic patterning/barcoding of materials in the NIR. In summary, we present a simple and mild route to NIR fluorescent nanosheets that promise high potential as NIR fluorophores for optical applications.

Toward Surface Chemistry of Semiconductor Nanocrystals at an Atomic-Molecular Level

ConspectusProperties of colloidal semiconductor nanocrystals with a single-crystalline structure are largely dominated by their surface structure at an atomic-molecular level, which is not well understood and controlled, due to a lack of experimental tools. However, if viewing the nanocrystal surface as three relatively independent spatial zones (i.e., crystal facets, inorganic-ligands interface, and ligands monolayer), we may approach an atomic-molecular level by coupling advanced experimental techniques and theoretical calculations.Semiconductor nanocrystals of interest are mainly based on compound semiconductors and mostly in two (or related) crystal structures, namely zinc-blende and wurtzite, which results in a small group of common low-index crystal facets. These low-index facets, from a surface-chemistry perspective, can be further classified into polar and nonpolar ones. Albeit far from being successful, the controlled formation of either polar or nonpolar facets is available for cadmium chalcogenide nanocrystals. Such facet-controlled systems offer a reliable basis for studying the inorganic-ligands interface. For convenience, here facet-controlled nanocrystals refer to a special class of shape-controlled ones, in which shape control is at an atomic level, instead of those with poorly defined facets (e.g., typical spheroids, nanorods, etc).Experimental and theoretical results reveal that type and bonding mode of surface ligands on nanocrystals is facet-specific and often beyond Green's classification (X-type, Z-type, and L-type). For instance, alkylamines bond strongly to the anion-terminated (0001) wurtzite facet in the form of ammonium ions, with three hydrogens of an ammonium ion bonding to three adjacent surface anion sites. With theoretically assessable experimental data, facet-ligands pairing can be identified using density functional theory (DFT) calculations. To make the pairing meaningful, possible forms of all potential ligands in the system need to be examined systematically, revealing the advantage of simple solution systems.Unlike the other two spatial zones, the ligands monolayer is disordered and dynamic at an atomic level. Thus, an understanding of the ligands monolayer on a molecular scale is sufficient for many cases. For colloidal nanocrystals stably coordinated with surface ligands, their solution properties are dictated by the ligands monolayer. Experimental and theoretical results reveal that solubility of a nanocrystal-ligands complex is an interplay between the intramolecular entropy of the ligands monolayer and intermolecular interactions of the ligands/nanocrystals. By introducing entropic ligands, solubility of nanocrystal-ligands complexes can be universally boosted by several orders of magnitude, i.e., up to >1 g/mL in typical organic solvents. Molecular environment in the pseudophase surrounding each nanocrystal plays a critical role in its chemical, photochemical, and photophysical properties.For some cases, such as the synthesis of high-quality nanocrystals, all three spatial zones of the nanocrystal surface must be taken into account. By optimizing nanocrystal surface at an atomic-molecular level, semiconductor nanocrystals with monodisperse size and facet structure become available recently through either direct synthesis or afterward facet reconstruction, implying full realization of their size-dependent properties.

Direct Optical Patterning of Quantum Dots: One Strategy, Different Chemical Processes

Patterning, stability, and dispersion of the semiconductor quantum dots (scQDs) are three issues strictly interconnected for successful device manufacturing. Recently, several authors adopted direct optical patterning (DOP) as a step forward in photolithography to position the scQDs in a selected area. However, the chemistry behind the stability, dispersion, and patterning has to be carefully integrated to obtain a functional commercial device. This review describes different chemical strategies suitable to stabilize the scQDs both at a single level and as an ensemble. Special attention is paid to those strategies compatible with direct optical patterning (DOP). With the same purpose, the scQDs' dispersion in a matrix was described in terms of the scQD surface ligands' interactions with the matrix itself. The chemical processes behind the DOP are illustrated and discussed for five different approaches, all together considering stability, dispersion, and the patterning itself of the scQDs.

Efficient carbamazepine degradation with Fe3+ doped 1T/2H hybrid molybdenum disulfide as peroxymonosulfate activator under high salinity wastewater

Drawing on the robust activation activity and affinity that transition metal ions and MoS₂ exhibit towards peroxymonosulfate (PMS), 1T/2H hybrid molybdenum disulfide doped with Fe³⁺ (Fe³⁺/N-MoS₂) was synthesized to activate PMS for the treatment of organic wastewater. The ultrathin sheet morphology and 1T/2H hybrid nature of Fe³⁺/N-MoS₂ were confirmed by characterization. The (Fe³⁺/N-MoS₂ + PMS) system demonstrated excellent performance in the degradation of carbamazepine (CBZ) above 90% within 10 min even under high salinity conditions. By electron paramagnetic resonance and active species scavenging experiments, it was inferred that SO₄^•─ palyed a dominant role in the treatment process. The strong synergistic interactions between 1T/2H MoS₂ and Fe³⁺ efficiently promoted PMS activation and generated active species. Additionally, the (Fe³⁺/N-MoS₂ + PMS) system was found to be capable of high activity for CBZ removal in high salinity natural water, and Fe³⁺/N-MoS₂ exhibited high stability during recycle tests. This new strategy of Fe³⁺ doped 1T/2H hybrid MoS₂ for more efficient PMS activation provides valuable insights for the removal of pollutants from high salinity wastewater.

Cu-Doped Heterointerfaced Ru/RuSe2 Nanosheets with Optimized H and H2 O Adsorption Boost Hydrogen Evolution Catalysis

Ruthenium chalcogenide is a highly promising catalytic system as a Pt alternative for hydrogen evolution reaction (HER). However, well-studied ruthenium selenide (RuSe₂ ) still exhibits sluggish HER kinetics in alkaline media due to the inappropriate adsorption strength of H and H₂ O. Herein, xx report a new design of Cu-doped Ru/RuSe₂ heterogeneous nanosheets (NSs) with optimized H and H₂ O adsorption strength for highly efficient HER catalysis in alkaline media. Theoretical calculations reveal that the superior HER performance is attributed to a synergistic effect of the unique heterointerfaced structure and Cu doping, which not only optimizes the electronic structure with a suitable d-band center to suppress proton overbinding but also alleviates the energy barrier with enhanced H₂ O adsorption. As a result, Cu-doped heterogeneous Ru/RuSe₂ NSs exhibit a small overpotential of 23 mV at 10 mA cm^-2 , a low Tafel slope of 58.5 mV dec^-1 and a high turnover frequency (TOF) value of 0.88 s^-1 at 100 mV for HER in alkaline media, which is among the best catalysts in noble metal-based electrocatalysts toward HER. The present Cu-doped Ru/RuSe₂ NSs interface catalyst is very stable for HER by showing no activity decay after 5000-cycle potential sweeps. This work heralds that heterogeneous interface modulation opens up a new strategy for the designing of more efficient electrocatalysts.

Investigation of the Photocatalytic Hydrogen Production of Semiconductor Nanocrystal-Based Hydrogels

Destabilization of a ligand-stabilized semiconductor nanocrystal solution with an oxidizing agent can lead to a macroscopic highly porous self-supporting nanocrystal network entitled hydrogel, with good accessibility to the surface. The previously reported charge carrier delocalization beyond a single nanocrystal building block in such gels can extend the charge carrier mobility and make a photocatalytic reaction more probable. The synthesis of ligand-stabilized nanocrystals with specific physicochemical properties is possible, thanks to the advances in colloid chemistry made in the last decades. Combining the properties of these nanocrystals with the advantages of nanocrystal-based hydrogels will lead to novel materials with optimized photocatalytic properties. This work demonstrates that CdSe quantum dots, CdS nanorods, and CdSe/CdS dot-in-rod-shaped nanorods as nanocrystal-based hydrogels can exhibit a much higher hydrogen production rate compared to their ligand-stabilized nanocrystal solutions. The gel synthesis through controlled destabilization by ligand oxidation preserves the high surface-to-volume ratio, ensures the accessible surface area even in hole-trapping solutions and facilitates photocatalytic hydrogen production without a co-catalyst. Especially with such self-supporting networks of nanocrystals, the problem of colloidal (in)stability in photocatalysis is circumvented. X-ray photoelectron spectroscopy and photoelectrochemical measurements reveal the advantageous properties of the 3D networks for application in photocatalytic hydrogen production.

Colloidal CdSe/CdS Core/Crown Nanoplatelets for Efficient Blue Light Emission and Optical Amplification

The application of CdSe nanoplatelets (NPLs) in the ultraviolet/blue region remains an open challenge due to charge trapping typically leading to limited photoluminescence quantum efficiency (PL QE) and sub-bandgap emission in core-only NPLs. Here, we synthesized 3.5 monolayer core/crown CdSe/CdS NPLs with various crown dimensions, exhibiting saturated blue emission and PL QE up to 55%. Compared to core-only NPLs, the PL intensity decays monoexponentially over two decades due to suppressed deep trapping and delayed emission. In both core-only and core/crown NPLs we observe biexciton-mediated optical gain between 470 and 510 nm, with material gain coefficients up to 7900 cm^-1 and consistently lower gain thresholds in crowned NPLs. Gain lifetimes are limited to 40 ps, due to residual ultrafast trapping and higher exciton densities at threshold. Our results provide guidelines for rational optimization of thin CdSe NPLs toward lighting and light-amplification applications.

Synthesis, Assembly, and Applications of Magic-Sized Semiconductor (CdSe)13 Cluster

ConspectusAtomically precise metal chalcogenide clusters (MCCs) are model molecular compounds of scientifically and technologically important semiconductor nanocrystals, which are known as quantum dots (QDs). The significantly high ambient stability of MCCs of particular sizes, as compared to that of slightly smaller or larger sizes, made them be termed "magic-sized clusters" (MSCs). In other words, MSCs with specific sizes between sizes of precursors (typically, metal-ligand complexes) and nanocrystals (typically, QDs) appear sequentially during the colloidal synthesis of nanocrystals, while the other cluster species decompose to precursor monomers or are consumed during the growth of the nanocrystals. Unlike nanocrystals with an ambiguous atomic-level structure and a substantial size distribution, MSCs possess atomically monodisperse size, composition, and distinct atomic arrangement. Chemical synthesis and exploration of properties of MSCs are of great significance since they help systematically understand the evolution of fundamental properties as well as build structure-activity relationships at distinct molecular levels. Furthermore, MSCs are anticipated to offer atomic-level insights into the growth mechanism of the semiconductor nanocrystals, which is highly desirable in the design of advanced materials with new functions. In this Account, we cover our recent efforts in the advancement of one of the most important stoichiometric CdSe MSCs, (CdSe)₁₃. In particular, we present its molecular structure derived from a single crystal X-ray crystallographic study of the closest MSC, Cd₁₄Se₁₃. The crystal structure of MSC enables not only the understanding of the electronic structure and prediction of the potential sites for heteroatom dopants (e.g., Mn²⁺ and Co²⁺) but also the identification of favorable synthetic conditions for the selective synthesis of desired MSCs. Next, we focus on enhancing the photoluminescence quantum yield and stability of Mn²⁺ doped (CdSe)₁₃ MSCs through their self-assembly, which is facilitated by the rigid diamines. In addition, we show how atomic-level synergistic effects and functional groups of the assemblies of alloy MSCs can be utilized for a highly enhanced catalytic CO₂ fixation with epoxides. Benefiting from the intermediate stability, the MSCs are explored as single-source precursors to low-dimensional nanostructures, such as nanoribbons and nanoplatelets, through the controlled transformation. Distinct differences in the outcome of the solid-state and colloidal-state conversion of MSCs suggest the need for careful consideration of the phase and reactivity of MSCs as well as the type of dopant to achieve novel structured multicomponent semiconductors. Finally, we summarize the Account and provide future perspectives on the fundamental and applied scientific research of MSCs.

Layer-Structured Anisotropic Metal Chalcogenides: Recent Advances in Synthesis, Modulation, and Applications

The unique electronic and catalytic properties emerging from low symmetry anisotropic (1D and 2D) metal chalcogenides (MCs) have generated tremendous interest for use in next generation electronics, optoelectronics, electrochemical energy storage devices, and chemical sensing devices. Despite many proof-of-concept demonstrations so far, the full potential of anisotropic chalcogenides has yet to be investigated. This article provides a comprehensive overview of the recent progress made in the synthesis, mechanistic understanding, property modulation strategies, and applications of the anisotropic chalcogenides. It begins with an introduction to the basic crystal structures, and then the unique physical and chemical properties of 1D and 2D MCs. Controlled synthetic routes for anisotropic MC crystals are summarized with example advances in the solution-phase synthesis, vapor-phase synthesis, and exfoliation. Several important approaches to modulate dimensions, phases, compositions, defects, and heterostructures of anisotropic MCs are discussed. Recent significant advances in applications are highlighted for electronics, optoelectronic devices, catalysts, batteries, supercapacitors, sensing platforms, and thermoelectric devices. The article ends with prospects for future opportunities and challenges to be addressed in the academic research and practical engineering of anisotropic MCs.

Study of the Mechanism and Increasing Crystallinity in the Self-Templated Growth of Ultrathin PbS Nanosheets

Colloidal 2D semiconductor nanocrystals, the analogue of solid-state quantum wells, have attracted strong interest in material science and physics. Molar quantities of suspended quantum objects with spectrally pure absorption and emission can be synthesized. For the visible region, CdSe nanoplatelets with atomically precise thickness and tailorable emission have been (almost) perfected. For the near-infrared region, PbS nanosheets (NSs) hold strong promise, but the photoluminescence quantum yield is low and many questions on the crystallinity, atomic structure, intriguing rectangular shape, and formation mechanism remain to be answered. Here, we report on a detailed investigation of the PbS NSs prepared with a lead thiocyanate single source precursor. Atomically resolved HAADF-STEM imaging reveals the presence of defects and small cubic domains in the deformed orthorhombic PbS crystal lattice. Moreover, variations in thickness are observed in the NSs, but only in steps of 2 PbS monolayers. To study the reaction mechanism, a synthesis at a lower temperature allowed for the study of reaction intermediates. Specifically, we studied the evolution of pseudo-crystalline templates toward mature, crystalline PbS NSs. We propose a self-induced templating mechanism based on an oleylamine-lead-thiocyanate (OLAM-Pb-SCN) complex with two Pb-SCN units as a building block; the interactions between the long-chain ligands regulate the crystal structure and possibly the lateral dimensions.

Mercury chalcogenide colloidal quantum dots for infrared photodetection: from synthesis to device applications

Commercial infrared (IR) photodetectors based on epitaxial growth inorganic semiconductors, e.g. InGaAs and HgCdTe, suffer from high fabrication cost, poor compatibility with silicon integrated circuits, rigid substrates and bulky cooling systems, which leaves a large development window for the emerging solution-processable semiconductor-based photo-sensing devices. Among the solution-processable semiconductors, mercury (Hg) chalcogenide colloidal quantum dots (QDs) exhibit unique ultra-broad and tuneable photo-responses in the short-wave infrared to far-wave infrared range, and have demonstrated photo-sensing abilities comparable to the commercial products, especially with advances in high operation temperature. Here, we provide a focused review on photodetectors employing Hg chalcogenide colloidal QDs, with a comprehensive summary of the essential progress in the areas of synthesis methods of QDs, property control, device engineering, focus plane array integration, etc. Besides imaging demonstrations, a series of Hg chalcogenide QD photodetector based flexible, integrated, multi-functional applications are also summarized. This review shows prospects for the next-generation low-cost highly-sensitive and compact IR photodetectors based on solution-processable Hg chalcogenide colloidal QDs.

Plate-Like Colloidal Metal Nanoparticles

The pseudo-two-dimensional (2D) morphology of plate-like metal nanoparticles makes them one of the most anisotropic, mechanistically understood, and tunable structures available. Although well-known for their superior plasmonic properties, recent progress in the 2D growth of various other materials has led to an increasingly diverse family of plate-like metal nanoparticles, giving rise to numerous appealing properties and applications. In this review, we summarize recent progress on the solution-phase growth of colloidal plate-like metal nanoparticles, including plasmonic and other metals, with an emphasis on mechanistic insights for different synthetic strategies, the crystallographic habits of different metals, and the use of nanoplates as scaffolds for the synthesis of other derivative structures. We additionally highlight representative self-assembly techniques and provide a brief overview on the attractive properties and unique versatility benefiting from the 2D morphology. Finally, we share our opinions on the existing challenges and future perspectives for plate-like metal nanomaterials.

Reversible Facet Reconstruction of CdSe/CdS Core/Shell Nanocrystals by Facet-Ligand Pairing

Synthesis of colloidal semiconductor nanocrystals with defined facet structures is challenging, though such nanocrystals are essential for fully realizing their size-dependent optical and optoelectronic properties. Here, for the mostly developed colloidal wurtzite CdSe/CdS core/shell nanocrystals, facet reconstruction is investigated under typical synthetic conditions, excluding nucleation, growth, and interparticle ripening. Within the reaction time window, two reproducible sets of facets─each with a specific group of low-index facets─can be reversibly reconstructed by switching the ligand system, indicating thermodynamic stability of each set. With a unique <0001> axis, atomic structures of the low-index facets of wurtzite nanocrystals are diverse. Experimental and theoretical studies reveal that each facet in a given set is paired with a common ligand in the solution, namely, either fatty amine and/or cadmium alkanoate. The robust bonding modes of ligands are found to be strongly facet-dependent and often unconventional, instead of following Green's classification. Results suggest that facet-controlled nanocrystals can be synthesized by optimal facet-ligand pairing either in synthesis or after-synthesis reconstruction, implying semiconductor nanocrystal formation with size-dependent properties down to an atomic level.

Charge Carrier Dynamics in Colloidally Synthesized Monolayer MoX2 Nanosheets

Transition metal dichalcogenides (TMDs) are nanostructured semiconductors with prospects in optoelectronics and photocatalysis. Several bottom-up procedures to synthesize such materials have been developed yielding colloidal transition metal dichalcogenides (c-TMDs). Where such methods initially yielded multilayered sheets with indirect band gaps, recently, also the formation of monolayered c-TMDs became possible. Despite these advances, no clear picture on the charge carrier dynamics in monolayer c-TMDs exists to date. Here, we show through broadband and multiresonant pump-probe spectroscopy, that the carrier dynamics in monolayer c-TMDs are dominated by a fast electron trapping mechanism, universal to both MoS₂ and MoSe₂, contrasting hole-dominated trapping in their multilayered counterparts. Through a detailed hyperspectral fitting procedure, sizable exciton red shifts are found and assigned to static shifts originating from both interactions with the trapped electron population and lattice heating. Our results pave the way to optimizing monolayer c-TMDs via passivation of predominantly the electron-trap sites.

2D II-VI Semiconductor Nanoplatelets: From Material Synthesis to Optoelectronic Integration

The field of colloidal synthesis of semiconductors emerged 40 years ago and has reached a certain level of maturity thanks to the use of nanocrystals as phosphors in commercial displays. In particular, II-VI semiconductors based on cadmium, zinc, or mercury chalcogenides can now be synthesized with tailored shapes, composition by alloying, and even as nanocrystal heterostructures. Fifteen years ago, II-VI semiconductor nanoplatelets injected new ideas into this field. Indeed, despite the emergence of other promising semiconductors such as halide perovskites or 2D transition metal dichalcogenides, colloidal II-VI semiconductor nanoplatelets remain among the narrowest room-temperature emitters that can be synthesized over a wide spectral range, and they exhibit good material stability over time. Such nanoplatelets are scientifically and technologically interesting because they exhibit optical features and production advantages at the intersection of those expected from colloidal quantum dots and epitaxial quantum wells. In organic solvents, gram-scale syntheses can produce nanoparticles with the same thicknesses and optical properties without inhomogeneous broadening. In such nanoplatelets, quantum confinement is limited to one dimension, defined at the atomic scale, which allows them to be treated as quantum wells. In this review, we discuss the synthetic developments, spectroscopic properties, and applications of such nanoplatelets. Covering growth mechanisms, we explain how a thorough understanding of nanoplatelet growth has enabled the development of nanoplatelets and heterostructured nanoplatelets with multiple emission colors, spatially localized excitations, narrow emission, and high quantum yields over a wide spectral range. Moreover, nanoplatelets, with their large lateral extension and their thin short axis and low dielectric surroundings, can support one or several electron-hole pairs with large exciton binding energies. Thus, we also discuss how the relaxation processes and lifetime of the carriers and excitons are modified in nanoplatelets compared to both spherical quantum dots and epitaxial quantum wells. Finally, we explore how nanoplatelets, with their strong and narrow emission, can be considered as ideal candidates for pure-color light emitting diodes (LEDs), strong gain media for lasers, or for use in luminescent light concentrators.

Carrier confinement and interband optical transitions in lead chalcogenide quantum wells, nanosheets, and nanoplatelets

Analytic equation for energy dispersion of electronic states in lead chalcogenide nanosheets is derived within an effective mass model. Selection rules for interband optical transitions are analyzed and expressions for interband optical matrix elements are obtained. It is shown that the main effect of the lateral confinement in nanoplatelets can be accounted for in terms of the quantized in-plane wave vector.

Simple and Tailorable Synthesis of Silver Nanoplates in Gram Quantities

Due to plasmonic and catalytic properties, silver nanoplates are of significant interest; therefore, their simple preparation in gram quantities is required. Preferably, the method is seedless, consists of few reagents, enables preparation of silver nanoplates with desired optical properties in high concentration, is scalable, and allows their long-term storage. The developed method is based on silver nitrate, sodium borohydride, polyvinylpyrrolidone, and H2O2 as the main reagents, while antifoam A204 is implemented to achieve better product quality on a larger scale. The effect of each component was evaluated and optimized. Solution volumes from 3 to 450 mL and concentrations of silver nanoplates from 0.88 to 4.8 g/L were tested. Their size was tailored from 25 nm to 8 μm simply by H2O2 addition, covering the entire visible plasmon spectra and beyond. They can be dried and spontaneously dispersed after at least one month of storage in the dark without any change in plasmonic properties. Their potential use in modern art was demonstrated by drying silver colloids on different surfaces in the presence of reagents or purified, resulting in a variety of colors but, more importantly, patterns of varying complexity, from simple multi-coffee-rings structures to dendritic forms and complex multilevel Sierpiński triangle fractals.