Origin of the Excellent Activity and Selectivity of a Single-Atom Copper Catalyst with Unsaturated Cu-N2 Sites via Peroxydisulfate Activation: Cu(III) as a Dominant Oxidizing Species

Selective glyphosate degradation via oxygen activation using Fe-N-C: Critical role of size exclusion

Selective elimination of glyphosate (PMG) from complex water matrices remains a significant challenge. Metal-nitrogen-carbon (M-N-C) materials derived from metal-organic frameworks (MOFs) offer a promising platform due to their tunable porosity and abundant active sites. In this study, three Fe-N-C-x (x = 5, 10, 20) catalysts with varying pore sizes (2-4 nm) and no surface-active sites were synthesized for PMG degradation under interference with contaminants of different sizes. The results showed Fe-N-C-5 exhibited superior catalytic and anti-interference performance for PMG degradation compared to Fe-N-C-10 and Fe-N-C-20. This was attributed to the greater accessibility of smaller-sized PMG (molecular size 0.9 nm) to the internal active sites through the pore channels, while larger-sized pollutants were effectively excluded. Zeta potential measurements and in situ ATR-FTIR spectroscopy revealed that the entrance of PMG was driven by both electrostatic interaction and coordination bonding between phosphate and Fe in Fe-N-C-5. Quenching experiments combined with electron spin resonance (ESR) analysis confirmed that singlet oxygen (1O2) was the primary reactive oxygen species responsible for PMG degradation in the Fe-N-C-5/O2(Vis) system. This study highlights the robust anti-interference capability of Fe-N-C-5 and provides new insights into its potential applications in advanced water treatment technologies.

State-Of-The-Art Structural Regulation Methods and Quantum Chemistry for Carbon-Based Single-Atom Catalysts in Advanced Oxidation Process: Critical Perspectives into Molecular Level

Advanced oxidation processes (AOPs) by carbon-based single-atom catalysts (SACs) are recognized as an attractive scientific frontier for water treatment, with the outstanding benefits of ultra-effective and anti-interference capability. However, most of the research has paid more attention to the performance of SACs, while the in-depth understanding of catalytic regulation by molecular interaction is relatively deficient. This critical review delves into deciphering the catalytic mechanism through a micro-level, which makes it more convenient to interpret apparent catalytic phenomena. It first summarizes basic theories of quantum chemistry, which provide mechanism interpretation and prediction for molecular-oxidation systems. Additionally, corresponding oxidation pathways of common oxidants are underscored. Following the oxidants, state-of-the-art regulation methods are discussed with special attention to involved molecular interactions and pollutants. Particularly, the preliminary insights into the "oxidant-catalyst-pollutants" internal relationships are provided to help construct the SAC-AOP system from a molecular standpoint. Meanwhile, some cutting-edge laboratory devices and pilot-scale engineering are presented to illustrate the ultimate purpose of scientific molecular exploration. Eventually, relative challenges of SACs-AOPs upon the design of catalytic systems and investigation methods are provided. This review aims to promote the large-scale potential of SACs-based AOPs in practical water treatment by emphasizing the pivotal role of micro-insights.

Step-scheme/Mott-Schottky integrated heteroiunctions in BiFeO3/ZnIn2S4/Ag hollow nanospheres: Facilitating efficient piezo-photocatalytic activation of peroxydisulfate to enhance nizatidine degradation and antibacterial activity

The piezo-photocatalysis enhanced by piezoelectric nanogenerators is considered one of the most effective methods for treating emerging contaminants (ECs) in environmental water. In this study, BiFeO3/ZnIn2S4/Ag (BFO/ZIS/Ag) with boosting piezo-photocatalytic performance was synthesized by modulating the interaction between the step-scheme (S-scheme) heterojunction and the Mott-Schottky barrier. The catalytic rate of the optimized BFO/ZIS/Ag-0.01 catalyst is 4.85 × 10-2 min-1 for the degradation of niazitidine (NZT) under both ultrasonic and visible light radiation, which is respectively 4.3 and 4.8 times higher than that of pure BFO and ZIS. Furthermore, the total organic carbon (TOC) test revealed that NZT degradation reached 98.4 % after 120 min of continuous reaction. This enhanced piezo-photocatalytic performance is mainly due to the synergistic effect of integrated heterojunction and piezoelectric field. DFT calculations revealed that the charge transfer enhancement at the heterogeneous interface resulted from directional electron transfer to ZIS via Zn-O and S-Ag channels, following the introduction of Ag nanoparticles, which shortened the carrier separation path. Additionally, BFO bent the band of the composite catalyst, promoting carrier separation. These resulted in the generation of abundant highly active 1O2, which specifically targeted and disrupted stable NZT molecules. Moreover, BFO/ZIS/Ag-0.01 exhibited strong inhibitory and antibacterial effects against Escherichia coli and Staphylococcus aureus via electrostatic adsorption and ionization. This study offers new insights into the restoration of aquatic environments and bacterial disinfection through the use of piezoelectric catalytic materials.

Self-replenishing neutral Fenton-like treatment for emerging contaminants through single Fe atom electron configuration regulation

Fenton technology is promising for removing recalcitrant and toxic organic contaminants for wastewater purification. Neutral Fenton technology is preferred for its reduced acid usage and improved operational convenience. However, the challenges are the low production of reactive species and the limited conversion of high-valent iron (Fe) to low-valent Fe. This study introduced a new cycle employing high-valent iron-oxo species [Fe(IV)=O], which directly participates in degradation, facilitating Fe regeneration. To achieve it, we developed an O-doped single Fe atom catalyst (SACs, Fe-N3O1) to promote the efficient Fe(IV)=O generation. The O-doping improved the acetaminophen degradation rate constant and turnover frequency of Fe-N3O1 by approximately tenfold, and elevated the steady-state concentration of Fe(IV)=O 65 times over. The normalized degradation rate constant of Fe-N3O1/H2O2 was superior to other reported catalysts. Density functional theory calculations indicated that O-doping decreased the charge density of Fe site, enhanced the metal-oxygen bond strength, and reduced the energy barrier for the key reaction intermediate (*O + *H2O), facilitating the efficient and selective formation of Fe(IV)=O. Fe-N3O1/H2O2 demonstrated wide pH tolerance, high resistance to complex water matrices, and excellent stability, making it promising for practical applications. This study provides a new perspective on controlling the selective generation of reactive species to achieve sustainable neutral Fenton-like reactions.

The Role of Cu3+ in the Oxygen Evolution Activity of Copper Oxides

Cu-based oxides and hydroxides represent an important class of materials from a catalytic and corrosion perspective. In this study, we investigate the formation of bulk and surface Cu3+ species that are stable under water oxidation catalysis in alkaline media. So far, no direct evidence existed for the presence of hydroxides (CuOOH) or oxides, which were primarily proposed by theory. This work directly places CuOOH in the oxygen evolution reaction (OER) Pourbaix stability region with a calculated free energy of -208.68 kJ/mol, necessitating a revision of known Cu-H2O phase diagrams. We also predict that the active sites of CuOOH for the OER are consistent with a bridge O* site between the two Cu3+ atoms with onset at ≥1.6 V vs the reversible hydrogen electrode (RHE), aligning with experimentally observed Cu2+/3+ oxidation waves in cyclic voltammetry of Fe-free and Fe-spiked copper in alkaline media. Trace amounts of Fe (2 μg/mL (ppm) to 5 μg/mL) in the solution measurably enhance the catalytic activity of the OER, likely due to the adsorption of Fe species that serve as the active sites . Importantly, modulation excitation X-ray absorption spectroscopy (ME-XAS) of a Cu thin-film electrode shows a distinct Cu3+ fingerprint under OER conditions at 1.8 V vs RHE. Additionally, in situ Raman spectroscopy of polycrystalline Cu in 0.1 mol/L (M) KOH revealed features consistent with those calculated for CuOOH in addition to CuO. Overall, this work provides direct evidence of bulk electrochemical Cu3+ species under OER conditions and expands our longstanding understanding of the oxidation mechanism and catalytic activity of copper.

Efficient and stable copper tungstate catalyst for water treatment with peroxymonosulfate: Effect of synthetic pH, primary oxidant, and practical feasibility

In this study, copper tungstate (CuWO4) nanoparticles, which are highly efficient and stable catalysts for water treatment, were synthesized via a hydrothermal method under various pH conditions. CuWO4 synthesized at pH 10 (CuWO4@10) exhibited the highest degradation efficiency and the lowest metal ion leaching. In the presence of CuWO4@10 (0.5 g/L) and peroxymonosulfate (PMS, 1 mM), 4-chlorophenol (4-CP, 100 μM) was completely degraded within 5 min, and the total metal ion leaching concentration after 4 h was only 10.2 μM. The catalytic activity of CuWO4 for 4-CP degradation was 4.7-99.0 times greater than that of CuO catalysts. This enhanced performance is attributed to the presence of W, which increases the surface area and reduces charge transfer resistance. Based on the results of radical-quenching experiments, solvent exchange experiments, PMS decomposition measurements, electron paramagnetic resonance spectroscopy, and Raman spectroscopy, high-valent copper (Cu(III)) was identified as the primary oxidant responsible for degradation in the CuWO4/PMS system. The CuWO4/PMS system rapidly degraded various phenolic compounds, and its degradation efficiency remained consistent across repeated uses of the CuWO4 catalyst. Degradation in groundwater also occurred efficiently in the CuWO4/PMS system. This study provides valuable insights into the development of practical PMS-based water treatment processes.

Exploring the reactivity of high-valent copper species with emerging contaminants using predictive QSAR modelling

High-valent metal species (HVMS) exhibited exceptional oxidative capabilities and selectivity in advanced oxidation processes (AOPs), making them promising oxidants for environmental remediation. However, their inherent instability has hindered kinetic assessments and limited further applications. This study developed a quantitative structure-activity relationship (QSAR) model for predicting the pseudo-first order rate constants (kobs) of high-valent copper species Cu(III) with typical emerging contaminants (ECs). The optimal model was logkobs = 0.002×PSA - 10.1465 × q(C-)X - 4.5896 × ELUMO - 2.0116. R2adj (0.822), Q2LOO (0.784), and Q2ext (0.951) shown the model's robust and great predictive ability. Polar surface area (PSA), Hirshfeld charge on carbon atoms (q(C-)X), and the energy of the lowest unoccupied molecular orbital (ELUMO) synergistically controlled the reactivity of Cu(III). A larger PSA was conducive to the diffusion of ECs in aquatic environments. Additionally, Density functional theory (DFT) calculations revealed that a smaller q(C-)X could increase the nucleophilic sites of ECs, thereby enhancing the electrophilic reaction of Cu(III). And a lower ELUMO was beneficial for adjusting the energy gap (EGAP) to enhance the reactivity of ECs. This study filled the gap in the prediction of kobs for Cu(III) and provided a reliable reference for the selective treatment of different ECs by HVMS.

Simultaneous modulation of double-coordination shells at cobalt atomic site towards superior oxygen electrocatalysis

Engineering the coordination microenvironment surrounding the single atom sites (SA) presents a great opportunity to enhance their catalytic performance. In this work, we report the rational design of the cobalt SA sites with simultaneous modifications to the double coordination shells of the Co atom. In the first coordination shell, a vacancy is introduced to create the asymmetric Co-N3-V configuration, where V denotes the vacancy. Meanwhile, phosphorus (P) atoms are doped into the carbon substrate to regulate the local environment of the second shell surrounding the Co site. These simultaneous modifications to the double-shell coordination influence the charge density of the active centers, and ultimately improve their activities. Additionally, the one-dimensional (1D) carbon substrate, that is composed of connected bubbles (BCF), provides a conductive and porous framework that facilitates fast kinetics. Taking these advantages, the Co-N-V/P@BCF catalyst demonstrates exceptional bifunctional oxygen catalytic behavior. Furthermore, the robust mechanical properties of Co-N-V/P@BCF, as evidenced by finite element analysis (FEA), endow the full Zn-air battery (ZAB) with remarkable reliability, flexibility, and stable high-rate long-term performance under diverse operating conditions. Therefore, this work not only offers new insights into regulating the electronic structure of single-atomic sites, but also promotes the development of ZAB for various applications.

Redox potentials of sulfonamide antibiotics mediating the electron transfer process in single-atom Cu catalyst/peroxymonosulfate system: Selective removal mechanisms for sulfonamides

The oxidative behaviors of target pollutants in single-atom catalysts-activated peroxymonosulfate (SACs/PMS) system has mostly been studied from the loaded metal and coordination structure of SACs. However, the origin of the altered degradation behavior caused by the specific properties of pollutants has been neglected. Herein, Cu atoms coordinated with four N atoms embedded in biochar (CuSA30@C) was prepared to establish the relationship between the selective degradation behavior of sulfonamide antibiotics in CuSA30@C/PMS system and their own properties. Four representative sulfonamide pollutants (SAs) were selected and their redox potentials were determined by measuring half-wave potentials (φ1/2). Results showed that a good correlation (R2=0.916) between the φ1/2 values of different SAs and their corresponding degradation rate constants (kobs) in CuSA30@C/PMS system was established. Additionally, the φ1/2 values of SAs correlate well with the energy gap between SAs and the CuSA30@C/PMS complexes, further proving that the redox potential of SAs played a crucial role for electron-transfer oxidation in CuSA30@C/PMS system. This work contributes to the understanding of the selective degradation activity of sulfonamide antibiotics in Fenton-like systems from the perspective of pollutants properties, and provides new ideas for the efficient treatment of sulfonamide antibiotic wastewater.

Non-metallic iodine single-atom catalysts with optimized electronic structures for efficient Fenton-like reactions

In this study, we introduce a highly effective non-metallic iodine single-atom catalyst (SAC), referred to as I-NC, which is strategically confined within a nitrogen-doped carbon (NC) scaffold. This configuration features a distinctive C-I coordination that optimizes the electronic structure of the nitrogen-adjacent carbon sites. As a result, this arrangement enhances electron transfer from peroxymonosulfate (PMS) to the active sites, particularly the electron-deficient carbon. This electron transfer is followed by a deprotonation process that generates the peroxymonosulfate radical (SO5•-). Subsequently, the SO5•- radical undergoes a disproportionation reaction, leading to the production of singlet oxygen (1O2). Furthermore, the energy barrier for the rate-limiting step of SO5•- generation in I-NC is significantly lower at 1.45 eV, compared to 1.65 eV in the NC scaffold. This reduction in energy barrier effectively overcomes kinetic obstacles, thereby facilitating an enhanced generation of 1O2. Consequently, the I-NC catalyst exhibits remarkable catalytic efficiency and unmatched reactivity for PMS activation. This leads to a significantly accelerated degradation of pollutants, evidenced by a relatively high observed kinetic rate constant (kobs ~ 0.436 min-1) compared to other metallic SACs. This study offers valuable insights into the rational design of effective non-metallic SACs, showcasing their promising potential for Fenton-like reactions in water treatment applications.

Advancements on Single-Atom Catalysts-Mediated Persulfate Activation: Generating Reactive Species for Contaminants Elimination in Water

The single-atom catalyst (SAC) activated persulfate process has emerged as a highly efficient technology for eliminating refractory organic compounds in aqueous environments. This review delves into the intricacies of utilizing SACs for the effective removal of various contaminants in water. The common supports and the preparation procedures of SACs are summarized at first. The synthesis methods of SACs (i.e., wet chemical method, one-pot hydrothermal method, and high-temperature pyrolysis method) are also described. Then, a comprehensive overview of the diverse reaction mechanisms in SAC-activated persulfate systems is presented, including a radical oxidation process via sulfate or hydroxyl radicals and superoxide radicals, or a nonradical process via single oxygen, surface active complex, and high-valent metal-oxo species oxidation. The impact of key factors such as peroxides concentration, SAC dosage, reaction pH, inorganic anions, organic matter, operando stability, and real water is also delved. The removal of various pollutants (i.e., azo dyes, phenolic compounds, pharmaceuticals, and bacteria) by this process is further summarized. Finally, the challenges and perspectives in the field of water treatment utilizing SACs are discussed.

Insight into efficient degradation of pentacyclic and hexacyclic sulfonamide antibiotics by synthetic trivalent copper: Performance and mechanism

High valent metal species, including Mn(III), Fe(IV) and Cu(III), have been identified as key intermediates in the degradation of pollutants in many advanced oxidation processes. However, unlike Mn(III) and Fe(IV), the current exploration of the reaction activity and selective oxidation mechanism of Cu(III) towards pollutants with different structures is still quite limited. Herein, the copper(III) periodate was synthesized to investigate the reactivity towards six sulfonamide antibiotics (SAs) including typical two pentacyclic structures (sulfamethoxazole (SMX) and sulfathiazole (STZ)) and four hexacyclic structures (sulfadiazine (SDZ), sulfamerazine (SMR), sulfamonomethoxine (SMM) and sulfapyridine (SPD)). The results indicated that all SAs almost completely removed by Cu(III) system after 10 min with the molar ratio of approximately 3:1 (Cu(III):SAs) and Cu(III) direct oxidation played the most important role. SAs with 6-ring substituents were more readily degraded by Cu(III) than SAs with 5-ring substituents, and the presence of electron-rich group such as -CH3 and -S in ring substituent increased the reactivity towards Cu(III). The introduction of coexisting anions (Cl-, SO42- and HCO3-) hardly affected the degradation of SAs by Cu(III) oxidation, while the addition of HA to some extent inhibited SAs degradation. The solution pH greatly affected the degradation of SAs by Cu(III) and the removal efficiencies of SAs roughly followed the rule of neutral > acidic > alkaline. The degradation mechanism of SAs with 5-ring and 6-ring substituents in Cu(III) system mainly included amino nitration, self-coupling, hydroxylation, S-N cleavage in SAs with 5-ring substituents and SO2 extrusion in SAs with 6-ring substituents. Although the real water matrix inhibited the degradation of SAs to varying degrees, Cu(III) still played a satisfactory performance on SAs degradation especially for electron-rich structure.

Roles of BOCu sites and graphite nitrogen on persulfate non-radical activation for tetracycline degradation

The activation of peroxymonosulfate (PMS) by carbon-based catalysts is deemed to be a promising method for the degradation of refractory organic contaminants in wastewater. Herein, a Cu-doping strategy in B and N co-doped carbon nanotubes with highly dispersed BOCu sites and graphite nitrogen were successfully synthesized for activating PMS to degradate tetracycline. The best removal rate of tetracycline within 60 min (97.63 %) was obtained by the 1.5 % Cu-BNC and the degradation rate was increased by 17.9 times. The enhanced catalyst activity was attributed to the promoting the cycle of the Cu(I)/Cu(II) redox pair by the formed BOCu sites, and the accelerating the electron transfer process by the adsorption of graphitic N for PMS. The non-free radical pathway including 1O2 and electron transfer played a dominant role in the 1.5 % Cu-BNC/PMS system. The degradation intermediates of TC were identified and three possible degradation pathways were proposed. Further toxicity analysis of the intermediates showed that the 1.5 % Cu-BNC/PMS system had a significant effect on weakening and reducing the biological toxicity and mutagenicity of TC. Moreover, it presented an excellent degradation performance in raw natural water. In general, the proposed regulation of carbon-based catalysts via the coordination-driven effect provides ideas for efficient wastewater treatment.

Low-coordinated Mn-N2 sites in graphene oxide induce peroxydisulfate activation for tetracycline degradation: Process optimization and theoretical calculation

Atom-dispersed low-coordinated transition metal-Nx catalysts exhibit excellent efficiency in activating peroxydisulfate (PDS) for environmental remediation. However, their catalytic performance is limited due to metal-N coordination number and single-atom loading amount. In this study, low-coordinated nitrogen-doped graphene oxide (GO) confined single-atom Mn catalyst (Mn-SA/NGO) was synthesized by molten salt-assisted pyrolysis and coupled to PDS for degradation of tetracycline (TC) in water. Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (AC-HAADF-STEM) and X-ray absorption fine structure spectroscopy (XAFS) analysis showed the successful doping of single-atom Mn (weight percentage 1.6%) onto GO and the formation of low-coordinated Mn-N2 sites. The optimized parameters obtained by Box-Behnken Design achieved 100% TC removal in both prediction and experimental results. The Mn-SA/NGO + PDS system had strong anti-interference ability for TC removal in the presence of anions. Besides, Mn-SA/NGO possessed good reusability and stability. O2•-, •OH, and 1O2 were the main active species for TC degradation, and the TC mineralization reached 85.1%. Density functional theory (DFT) calculations confirmed that the introduction of single atoms Mn could effectively enhance adsorption and activation of PDS. The findings provide a reference for the synthesis of high-performance single-atom catalysts for effective removal of antibiotics.

Microenvironment Engineering of Heterogeneous Catalysts for Liquid-Phase Environmental Catalysis

Environmental catalysis has emerged as a scientific frontier in mitigating water pollution and advancing circular chemistry and reaction microenvironment significantly influences the catalytic performance and efficiency. This review delves into microenvironment engineering within liquid-phase environmental catalysis, categorizing microenvironments into four scales: atom/molecule-level modulation, nano/microscale-confined structures, interface and surface regulation, and external field effects. Each category is analyzed for its unique characteristics and merits, emphasizing its potential to significantly enhance catalytic efficiency and selectivity. Following this overview, we introduced recent advancements in advanced material and system design to promote liquid-phase environmental catalysis (e.g., water purification, transformation to value-added products, and green synthesis), leveraging state-of-the-art microenvironment engineering technologies. These discussions showcase microenvironment engineering was applied in different reactions to fine-tune catalytic regimes and improve the efficiency from both thermodynamics and kinetics perspectives. Lastly, we discussed the challenges and future directions in microenvironment engineering. This review underscores the potential of microenvironment engineering in intelligent materials and system design to drive the development of more effective and sustainable catalytic solutions to environmental decontamination.

Optimal Oxophilicity at the Fe-Nx Interface Enhances the Generation of Singlet Oxygen for Efficient Fenton-Like Catalysis

In the pursuit of efficient singlet oxygen generation in Fenton-like catalysis, the utilization of single-atom catalysts (SACs) emerges as a highly desired strategy. Here, a discovery is reported that the single-atom Fe coordinated with five N-atoms on N-doped porous carbon, denoted as Fe-N5/NC, outperform its counterparts, those coordinated with four (Fe-N4/NC) or six N-atoms (Fe-N6/NC), as well as state-of-the-art SACs comprising other transition metals. Thus, Fe-N5/NC exhibits exceptional efficacy in activating peroxymonosulfate for the degradation of organic pollutants. The coordination number of N-atoms can be readily adjusted by pyrolysis of pre-assembly structures consisting of Fe3+ and various isomers of phenylenediamine. Fe-N5/NC displayed outstanding tolerance to environmental disturbances and minimal iron leaching when incorporated into a membrane reactor. A mechanistic study reveals that the axial ligand N reduces the contribution of Fe-3d orbitals in LUMO and increases the LUMO energy of Fe-N5/NC. This, in turn, reduces the oxophilicity of the Fe center, promoting the reactivity of *OO intermediate-a pivotal step for yielding singlet oxygen and the rate-determining step. These findings unveil the significance of manipulating the oxophilicity of metal atoms in single-atom catalysis and highlight the potential to augment Fenton-like catalysis performance using Fe-SACs.

Single-atom catalysts activate persulfate to degrade emerging organic contaminants in aqueous environments

Single-atom catalysts (SACs) exhibit outstanding catalytic activity due to their highly dispersed metal centers. Activating persulfates (PS) with SACs can generate various reactive oxygen species (ROS) to efficiently degrade emerging organic contaminants (EOCs) in aqueous environments, offering unique advantages such as high reaction rates and excellent stability. This technique has been extensively researched and holds enormous potential applications. In this paper, we comprehensively elaborated on the synthesis methods of SACs and their limitations, and factors influencing the catalytic performance of SACs, including metal center characteristics, coordination environment, and types of substrates. We also analyzed practical considerations for application. Subsequently, we discussed the mechanism of SACs activating PS for EOCs degradation, encompassing adsorption processes, radical pathways, and non-radical pathways. Finally, we provide prospects and outline our vision for future research, aiming to guide advancements in applying this technique.

Correlating active sites and oxidative species in single-atom catalyzed Fenton-like reactions

Single-atom catalysts (SACs) have gained widespread popularity in heterogeneous catalysis-based advanced oxidation processes (AOPs), owing to their optimal metal atom utilization efficiency and excellent recyclability by triggering reactive oxidative species (ROS) for target pollutant oxidation in water. Systematic summaries regarding the correlation between the active sites, catalytic activity, and reactive species of SACs have rarely been reported. This review provides an overview of the catalytic performance of carbon- and metal oxide-supported SACs in Fenton-like reactions, as well as the different oxidation pathways induced by the metal and non-metal active sites, including radical-based pathways (e.g., ·OH and SO4˙-) and nonradical-based pathways (e.g. 1O2, high-valent metal-oxo species, and direct electron transfer). Thereafter, we discuss the effects of metal types, coordination environments, and spin states on the overall catalytic performance and the generated ROS in Fenton-like reactions. Additionally, we provide a perspective on the future challenges and prospects for SACs in water purification.

Bioinspired axial S-coordinated single-atom cobalt catalyst to efficient activate peroxymonosulfate for selective high-valent Co-Oxo species generation

The efficient activation and selective high-valent metal-oxo (HVMO) species generation remain challenging for peroxymonosulfate (PMS)-based advanced oxidation processes (PMS-AOPs) in water purification. The underlying mechanism of the activation pathway is ambiguous, leading to a massive dilemma in the control and regulation of HVMO species generation. Herein, bioinspired by the bio-oxidase structure of cytochrome P450, the axial coordination strategy was adopted to tailor a single-atom cobalt catalyst (CoN4S-CB) with an axial S coordination. CoN4S-CB high-selectively generated high-valent Co-Oxo species (Co(IV)=O) via PMS activation. Co(IV)=O demonstrated an ingenious oxygen atom transfer (OAT) reaction to achieve the efficient degradation of sulfamethoxazole (SMX), and this allowed robust operation in various complex environments. The axial S coordination modulated the 3d orbital electron distribution of the Co atom. Density functional theory (DFT) calculation revealed that the axial S coordination decreased the energy barrier for PMS desorption and lowered the free energy change (ΔG) for Co(IV)=O generation. CoN4S-PMS* had a narrow d-band close to the Fermi level, which enhanced charge transfer to accelerate the cleavage of O-O and O-H bonds in PMS. This work provides a broader perspective on the activator design with natural enzyme structure-like active sites to efficient activate PMS for selective HVMO species generation.

Single Atom Catalyst in Persulfate Oxidation Reaction: From Atom Species to Substance

With maximum utilization of active metal sites, more and more researchers have reported using single atom catalysts (SACs) to activate persulfate (PS) for organic pollutants removal. In SACs, single metal atoms (Fe, Co, Cu, Mn, etc.) and different substrates (porous carbon, biochar, graphene oxide, carbon nitride, MOF, MoS2, and others) are the basic structural. Metal single atoms, substances, and connected chemical bonds all have a great influence on the electronic structures that directly affect the activation process of PS and degradation efficiency to organic pollutants. However, there are few relevant reviews about the interaction between metal single atoms and substances during PS activation process. In this review, the SACs with different metal species and substrates are summarized to investigate the metal-support interaction and evaluate their effects on PS oxidation reaction process. Furthermore, how metal atoms and substrates affect the reactive species and degradation pathways are also discussed. Finally, the challenges and prospects of SACs in PS-AOPs are proposed.

Size-Dependent Catalysis in Fenton-like Chemistry: From Nanoparticles to Single Atoms

State-of-the-art Fenton-like reactions are crucial in advanced oxidation processes (AOPs) for water purification. This review explores the latest advancements in heterogeneous metal-based catalysts within AOPs, covering nanoparticles (NPs), single-atom catalysts (SACs), and ultra-small atom clusters. A distinct connection between the physical properties of these catalysts, such as size, degree of unsaturation, electronic structure, and oxidation state, and their impacts on catalytic behavior and efficacy in Fenton-like reactions. In-depth comparative analysis of metal NPs and SACs is conducted focusing on how particle size variations and metal-support interactions affect oxidation species and pathways. The review highlights the cutting-edge characterization techniques and theoretical calculations, indispensable for deciphering the complex electronic and structural characteristics of active sites in downsized metal particles. Additionally, the review underscores innovative strategies for immobilizing these catalysts onto membrane surfaces, offering a solution to the inherent challenges of powdered catalysts. Recent advances in pilot-scale or engineering applications of Fenton-like-based devices are also summarized for the first time. The paper concludes by charting new research directions, emphasizing advanced catalyst design, precise identification of reactive oxygen species, and in-depth mechanistic studies. These efforts aim to enhance the application potential of nanotechnology-based AOPs in real-world wastewater treatment.

Water self-purification via electron donation effect of emerging contaminants arousing oxygen activation over ordered carbon-enhanced CoFe quantum dots

The release of emerging contaminants (ECs) into aquatic environments poses a significant risk to global water security. Advanced oxidation processes (AOPs), while effective in removing ECs, are often resource and energy-intensive. Here, we introduce a novel catalyst, CoFe quantum dots embedded in graphene nanowires (CoFeQds@GN-Nws), synthesized through anaerobic polymerization. It uniquely features electron-rich and electron-poor micro-regions on its surface, enabling a self-purification mechanism in wastewater. This is achieved by harnessing the internal energy of wastewater, particularly the bonding energy of pollutants and dissolved oxygen (DO). It demonstrates exceptional efficiency in removing ECs at ambient temperature and pressure without the need for external oxidants, achieving a removal rate of nearly 100.0%. The catalyst's structure-activity relationship reveals that CoFe quantum dots facilitate an unbalanced electron distribution, forming these micro-regions. This leads to a continuous electron-donation effect, where pollutants are effectively cleaved or oxidized. Concurrently, DO is activated into superoxide anions (O2•-), synergistically aiding in pollutant removal. This approach reduces resource and energy demands typically associated with AOPs, marking a sustainable advancement in wastewater treatment technologies.

Precise Modulation of the Coordination Environment of Single Cu Site Catalysts to Regulate the Peroxymonosulfate Activation Pathway for Water Remediation

Single atom site catalysts (SACs) with atomically dispersed active sites can be expected to be potential ideal catalysts for accurately modulating the persulfate activation pathway during the water remediation process because of their well-defined structure and the maximum metallic atom utilization. In this paper, a series of Cu SACs with different coordination environments were synthesized to elaborately regulate the peroxymonosulfate activation pathway in AOPs to clarify active species generation and transformation in water remediation. The degradation rate constants (kobs) of Cu-N2, Cu-N3, and Cu-N4 were 0.028, 0.021, and 0.015 min-1, respectively. Cu-N2 SACs exhibited a noticeable enhanced performance for bisphenol A (BPA) removal from water compared to that of the Cu-Nx SACs (x = 3, 4), accompanied by peroxymonosulfate (PMS) activation pathway variation. As shown by experimental and theoretical results, the PMS activation pathway was transformed from ROS to electron transfer with nitrogen coordination numbers decreasing from 4 to 2, which can be ascribed to the uneven charge distribution of Cu sites as well as upshifts in the d-band center, and thereby optimized electron transfer for PMS activation. Furthermore, the increasing nitrogen vacancies of single Cu site catalysts can also result in more unoccupied 3d orbitals of Cu atoms in SACs, thereby improving the intermediates' (PMS and BPA) adsorption-desorption process and BPA removal performance. These findings provided a beneficial approach for the coordination number regulation of SACs in water remediation.

Advances in Atomically Dispersed Metal and Nitrogen Co-Doped Carbon Catalysts for Advanced Oxidation Technologies and Water Remediation: From Microenvironment Modulation to Non-Radical Mechanisms

Atomically dispersed metal and nitrogen co-doped carbon catalysts (M-N-C) have been attracting tremendous attentions thanks to their unique MNx active sites and fantastic catalytic activities in advanced oxidation technologies (AOTs) for water remediation. However, precisely tailoring the microenvironment of active sites at atomic level is still an intricate challenge so far, and understanding of the non-radical mechanisms in persulfate activation exists many uncertainties. In this review, latest developments on the microenvironment modulation strategies of atomically dispersed M-N-C catalysts including regulation of central metal atoms, regulation of coordination numbers, regulation of coordination heteroatoms, and synergy between single-atom catalysts (SACs) with metal species are systematically highlighted and discussed. Afterwards, progress and underlying limitations about the typical non-radical pathways from production of singlet oxygen, electron transfer mechanism to generation of high-valent metal species are well demonstrated to inspire intrinsic insights about the mechanisms of M-N-C/persulfate systems. Lastly, perspectives for the remaining challenges and opportunities about the further development of carbon-based SACs in environment remediation are also pointed out. It is believed that this review will be much valuable for the further design of active sites in M-N-C/persulfate catalytic systems and promote the wide application of SACs in various fields.

Sustainable and Rapid Water Purification at the Confined Hydrogel Interface

Emerging organic contaminants in water matrices have challenged ecosystems and human health safety. Persulfate-based advanced oxidation processes (PS-AOPs) have attracted much attention as they address potential water purification challenges. However, overcoming the mass transfer constraint and the catalyst's inherent site agglomeration in the heterogeneous system remains urgent. Herein, the abundant metal-anchored loading (≈6-8 g m-2) of alginate hydrogel membranes coupled with cross-flow mode as an efficient strategy for water purification applications is proposed. The organic flux of the confined hydrogel interfaces sharply enlarges with the reduction of the thickness of the boundary layer via the pressure field. The normalized property of the system displays a remarkable organic (sulfonamides) elimination rate of 4.87 × 104 mg min-1 mol-1. Furthermore, due to the fast reaction time (<1 min), cross-flow mode only reaches a meager energy cost (≈2.21 Wh m-3) under the pressure drive field. It is anticipated that this finding provides insight into the novel design with ultrafast organic removal performance and low techno-economic cost (i.e., energy operation cost, material, and reagent cost) for the field of water purification under various PS-AOPs challenging scenarios.

Heteroatom substitution enhances generation and reactivity of surface-activated peroxydisulfate complexes for catalytic fenton-like reactions

Peroxydisulfate (PDS)-based Fenton-like reactions are promising advanced oxidation processes (AOPs) to degrade recalcitrant organic water pollutants. Current research predominantly focuses on augmenting the generation of reactive species (e.g., surface-activated PDS complexes (PDS*) to improve treatment efficiency, but overlooks the potential benefits of enhancing the reactivity of these species. Here, we enhanced PDS* generation and reactivity by incorporating Zn into CuO catalyst lattice, which resulted in 99% degradation of 4-chlorophenol within only 10 min. Zn increased PDS* generation by nearly doubling PDS adsorption while maintaining similar PDS to PDS* conversion efficiency, and induced higher PDS* reactivity than the common catalyst CuO, as indicated by a 4.1-fold larger slope between adsorbed PDS and open circuit potential of a catalytic electrode. Cu-O-Zn formation upshifts the d-band center of Cu sites and lowers the energy barrier for PDS adsorption and sulfate desorption, resulting in enhanced PDS* generation and reactivity. Overall, this study informs strategies to enhance PDS* reactivity and design highly active catalysts for efficient AOPs.

Paint sludge derived activated carbon encapsulating with cobalt nanoparticles for non-radical activation of peroxymonosulfate

Industrial solid waste management and recycling are important to environmental sustainability. In this study, cobalt (Co) nanoparticles encapsulated in paint sludge-derived activated carbon (AC) were fabricated. The Co-AC possessed high conductivity, magnetic properties and abundant metal oxide impurities (TiAlSiOx), which was applied as multifunctional catalyst for peroxymonosulfate (PMS) activation. Compared to pure AC, the Co-AC exhibited significant enhanced performance for degradation of tetracycline hydrochloride (TCH) via PMS activation. Mechanism studies by in situ Raman spectroscopy, Fourier infrared spectroscopy, electrochemical analysis and electron paramagnetic resonance suggested that surface-bonded PMS (PMS*) and singlet oxygen (1O2) are the dominant reactive species for TCH oxidation. The non-radical species can efficiently oxidize electron-rich pollutants with high efficiency, which minimized the consumption of PMS and the catalyst. The removal percentages of TCH reached 97 % within 5 min and ∼ 99 % within 15 min in the Co-AC/PMS system. The Co active sites facilitated PMS adsorption to form the PMS* and the TiAlSiOx impurities provided abundant oxygen vacancy for generation of the 1O2. In addition, the Co-AC/PMS system achieved high efficiency and stability for oxidation of the target pollutants over a long-term continuous operation. This work not only offers a cost-effective approach for recycling industrial waste but also provides new insights into the application of waste-derived catalyst for environmental remediation.

Tailoring d-band center of high-valent metal-oxo species for pollutant removal via complete polymerization

Polymerization-driven removal of pollutants in advanced oxidation processes (AOPs) offers a sustainable way for the simultaneous achievement of contamination abatement and resource recovery, supporting a low-carbon water purification approach. However, regulating such a process remains a great challenge due to the insufficient microscopic understanding of electronic structure-dependent reaction mechanisms. Herein, this work probes the origin of catalytic pollutant polymerization using a series of transition metal (Cu, Ni, Co, and Fe) single-atom catalysts and identifies the d-band center of active site as the key driver for polymerization transfer of pollutants. The high-valent metal-oxo species, produced via peroxymonosulfate activation, are found to trigger the pollutant removal via polymerization transfer. Phenoxyl radicals, identified by the innovative spin-trapping and quenching approaches, act as the key intermediate in the polymerization reactions. More importantly, the oxidation capacity of high-valent metal-oxo species can be facilely tuned by regulating their binding strength for peroxymonosulfate through d-band center modulation. A 100% polymerization transfer ratio is achieved by lowering the d-band center. This work presents a paradigm to dynamically modulate the electronic structure of high-valent metal-oxo species and optimize pollutant removal from wastewater via polymerization.

Selective electrophilic attack towards organic micropollutants with superior Fenton-like activity by biochar-supported cobalt single-atom catalyst

The global shortage of freshwater and inadequate supply of clean water have necessitated the implementation of robust technologies for wastewater purification, and Fenton-like chemistry is a highly-promising approach. However, realizing the rapid Fenton-like chemistry for high-efficiency degradation of organic micropollutants (OMs) remains challenging. Herein, one novel system was constructed by a Co single-atom catalyst activating peroxymonosulfate (PMS), and the optimal system (SA-Co-NBC-0.2/PMS) achieved unprecedented catalytic performance towards a model OM [Iohexol (IOH)], i.e., almost 100% decay ratio in only 10 min (the observed rate constant: 0.444 min-1) with high electrophilic species 1O2 (singlet oxygen) generation. Theoretical calculations unveiled that Co-N4 sites preferred to adsorb the terminal-O of PMS (more negative adsorption energy than other O sites: -32.67 kcal/mol), promoting the oxidation of PMS to generate 1O2. Iodine (I)23 (0.1097), I24 (0.1154) and I25 (0.0898) on IOH with higher f- electrophilic values were thus identified as the main attack sites. Furthermore, 16S ribosomal RNA high-throughput sequencing and quantitative structure-activity relationship analysis illustrated the environmentally-benign property of the SA-Co-NBC-0.2 and the tapering ecological risk during IOH degradation process. Significantly, this work comprehensively checked the competence of the SA-Co-NBC-0.2/PMS system for organics abatement in practical wastewater.

Understanding the Distance Effect of the Single-Atom Active Sites in Fenton-Like Reactions for Efficient Water Remediation

Emerging single-atom catalysts (SACs) are promising in water remediation through Fenton-like reactions. Despite the notable enhancement of catalytic activity through increasing the density of single-atom active sites, the performance improvement is not solely attributed to the increase in the number of active sites. The variation of catalytic behaviors stemming from the increased atomic density is particularly elusive and deserves an in-depth study. Herein, single-atom Fe catalysts (FeSA-CN) with different distances (dsite) between the adjacent single-atom Fe sites are constructed by controlling Fe loading. With the decrease in dsite value, remarkably enhanced catalytic activity of FeSA-CN is realized via the electron transfer regime with peroxymonosulfate (PMS) activation. The decrease in dsite value promotes electronic communication and further alters the electronic structure in favor of PMS activation. Moreover, the two adjacent single-atom Fe sites collectively adsorb PMS and achieve single-site desorption of the PMS decomposition products, maintaining continuous PMS activation and contaminant removal. Moreover, the FeSA-CN/PMS system exhibits excellent anti-interference performance for various aquatic systems and good durability in continuous-flow experiments, indicating its great potential for water treatment applications. This study provides an in-depth understanding of the distance effect of single-atom active sites on water remediation by designing densely populated SACs.

Overlooked role of void-nanoconfined effect in emerging pollutant degradation: Modulating the electronic structure of active sites to accelerate catalytic oxidation

The efficient removal of emerging pollutant from water is the ultimate frontiers of advanced oxidation processes (AOPs), yet it is challenging to obtain higher catalytic activity and oxidation rate. Herein, a sustainable solution was proposed by optimizing the curvature of confined structure to modulate the electronic state of the active sites in nanochannels for improving the catalytic activity. In addition, the confined effect can enhance the oxidation rate by shorting the mass transfer of active species and pollutants. A void-nanoconfined nanoreactor was prepared by loading Fe2O3 into the nanochannels (<5 nm) of the hollow carbon sphere. An enhancement of 3 orders of magnitude was obtained in the degradation rate constant of void-nanoconfined catalytic system toward sulfamethoxazole (SMX) (6.25 min-1) compared with the non-confined system. The kinetics enhancement was attributed to the larger electron potential difference between the outer and inner nanochannel caused by the curvature increase of carbon sphere, accelerating the electron transfer, so that the energy barrier of SMX degradation reaction was reduced by 31 kcal/mol with the assistance of confinement energy. Importantly, the NC-IN/PDS system exhibited outstanding removal efficiency for the actual river water using a continuous flow reactor. This work provides a new insight into designing an efficient and stable catalytic nanoreactor, enriching the domain of advanced wastewater treatment strategies.

Atomic-Level Regulation of Cu-Based Electrocatalyst for Enhancing Oxygen Reduction Reaction: From Single Atoms to Polymetallic Active Sites

The slow kinetics of cathodic oxygen reduction reactions (ORR) in fuel cells and the high cost of commercial Pt-based catalysts limit their large-scale application. Cu-based single-atom catalysts (SACs) have received increasing attention as a promising ORR catalyst due to their high atom utilization, high thermodynamic activity, adjustable electronic structure, and low cost. Herein, the recent research progress of Cu-based catalysts is reviewed from single atom to polymetallic active sites for ORR. First, the design and synthesis method of Cu-based SACs are summarized. Then the atomic-level structure regulation strategy of Cu-based catalyst is proposed to improve the ORR performance. The different ORR catalytic mechanism based on the different Cu active sites is further revealed. Finally, the design principle of high-performance Cu-based SACs is proposed for ORR and the opportunities and challenges are further prospected.

Copper Single-Atom Catalysts-A Rising Star for Energy Conversion and Environmental Purification: Synthesis, Modification, and Advanced Applications

Future renewable energy supply and green, sustainable environmental development rely on various types of catalytic reactions. Copper single-atom catalysts (Cu SACs) are attractive due to their distinctive electronic structure (3d orbitals are not filled with valence electrons), high atomic utilization, and excellent catalytic performance and selectivity. Despite numerous optimization studies are conducted on Cu SACs in terms of energy conversion and environmental purification, the coupling among Cu atoms-support interactions, active sites, and catalytic performance remains unclear, and a systematic review of Cu SACs is lacking. To this end, this work summarizes the recent advances of Cu SACs. The synthesis strategies of Cu SACs, metal-support interactions between Cu single atoms and different supports, modification methods including modification for carriers, coordination environment regulating, site distance effect utilizing, and dual metal active center catalysts constructing, as well as their applications in energy conversion and environmental purification are emphatically introduced. Finally, the opportunities and challenges for the future Cu SACs development are discussed. This review aims to provide insight into Cu SACs and a reference for their optimal design and wide application.

Contribution of 1O2 in the efficient degradation of organic pollutants with Cu0/Cu2O/CuO@N-C activated peroxymonosulfate: A Case study with tetracycline

Peroxymonosulfate-mediated advanced oxidation processes (PMS-AOPs) degrading organic pollutants (Tetracycline (TC) as an example) in water with singlet oxygen (1O2) as the main reactive oxygen has received more and more attention. However, the generation mechanism of 1O2 is still unclear. Consequently, this study investigates the 1O2 formation mechanism during the activated PMS process using a nitrogen-copper-loaded carbon-based material (Cu0/Cu2O/CuO@N-C), synthesized by thermally decomposing organobase-modified HKUST-1 via a one-pot method. It was discovered that incorporating an organobase (Benzylamine) into the metal organic framework (MOF) precursor directs the MOF's self-assembly process and supplements its nitrogen content. This modification modulates the Nx-Cu-Oy active site formation in the material, selectively producing 1O2. Additionally, 1O2 was identified as the dominant reactive oxygen species in the Cu0/Cu2O/CuO@N-C-PMS system, contributing to TC degradation with a rate of 70.82%. The TC degradation efficiency remained high in the pH range of 3-11 and sustained its efficacy after five consecutive uses. Finally, based on the intermediates of TC degradation, three possible degradation pathways were postulated, and a reduction in the ecotoxicity of the degradation products was predicted. This work presents a novel and general strategy for constructing nitrogen-copper-loaded carbon-based materials for use in PMS-AOPs.

Electron Delocalization Realizes Speedy Fenton-Like Catalysis over a High-Loading and Low-Valence Zinc Single-Atom Catalyst

A zinc (Zn)-based single-atom catalyst (SAC) is recently reported as an active Fenton-like catalyst; however, the low Zn loading greatly restricts its catalytic activity. Herein, a molecule-confined pyrolysis method is demonstrated to evidently increase the Zn loading to 11.54 wt.% for a Zn SAC (ZnSA -N-C) containing a mixture of Zn-N4 and Zn-N3 coordination structures. The latter unsaturated Zn-N3 sites promote electron delocalization to lower the average valence state of Zn in the mix-coordinated Zn-Nx moiety conducive to interaction of ZnSA -N-C with peroxydisulfate (PDS). A speedy Fenton-like catalysis is thus realized by the high-loading and low-valence ZnSA -N-C for PDS activation with a specific activity up to 0.11 min L-1 m-2 , outstripping most Fenton-like SACs. Experimental results reveal that the formation of ZnSA -N-C-PDS* complex owing to the strong affinity of ZnSA -N-C to PDS empowers intense direct electron transfer from the electron-rich pollutant toward this complex, dominating the rapid bisphenol A (BPA) elimination. The electron transfer pathway benefits the desirable environmental robustness of the ZnSA -N-C/PDS system for actual water decontamination. This work represents a new class of efficient and durable Fenton-like SACs for potential practical environmental applications.

Ozone Micronano-bubble-Enhanced Selective Degradation of Oxytetracycline from Production Wastewater: The Overlooked Singlet Oxygen Oxidation

The efficient and selective removal of refractory antibiotics from high-strength antibiotic production wastewater is crucial but remains a substantial challenge. In this study, a novel ozone micronano-bubble (MNB)-enhanced treatment system was constructed for antibiotic production wastewater treatment. Compared with conventional ozone, ozone MNBs exhibit excellent treatment efficiency for oxytetracycline (OTC) degradation and toxicity decrease. Notably, this study identifies the overlooked singlet oxygen (1O2) for the first time as a crucial active species in the ozone MNB system through probe and electron paramagnetic resonance methods. Subsequently, the oxidation mechanisms of OTC by ozone MNBs are systematically investigated. Owing to the high reactivity of OTC toward 1O2, ozone MNBs enhance the selective and anti-interference performance of OTC degradation in raw OTC production wastewater with complex matrixes. This study provides insights into the mechanism of ozone MNB-enhanced pollutant degradation and a new perspective for the efficient treatment of high-concentration industrial wastewater using ozone MNBs. In addition, this study presents a promising technology with scientific guidance for the treatment of antibiotic production wastewater.

Single atom catalyst-mediated generation of reactive species in water treatment

Water is one of the most essential components in the sustainable development goals (SDGs) of the United Nations. With worsening global water scarcity, especially in some developing countries, water reuse is gaining increasing acceptance. A key challenge in water treatment by conventional treatment processes is the difficulty of treating low concentrations of pollutants (micromolar to nanomolar) in the presence of much higher levels of inorganic ions and natural organic matter (NOM) in water (or real water matrices). Advanced oxidation processes (AOPs) have emerged as an attractive treatment technology that generates reactive species with high redox potentials (E0) (e.g., hydroxyl radical (HO˙), singlet oxygen (1O2), sulfate radical (SO4˙-), and high-valent metals like iron(IV) (Fe(IV)), copper(III) (Cu(III)), and cobalt(IV) (Co(IV))). The use of single atom catalysts (SACs) in AOPs and water treatment technologies has appeared only recently. This review introduces the application of SACs in the activation of hydrogen peroxide and persulfate to produce reactive species in treatment processes. A significant part of the review is devoted to the mechanistic aspects of traditional AOPs and their comparison with those triggered by SACs. The radical species, SO4˙- and HO˙, which are produced in both traditional and SACs-activated AOPs, have higher redox potentials than non-radical species, 1O2 and high-valent metal species. However, SO4˙- and HO˙ radicals are non-selective and easily affected by components of water while non-radicals resist the impact of such constituents in water. Significantly, SACs with varying coordination environments and structures can be tuned to exclusively generate non-radical species to treat water with a complex matrix. Almost no influence of chloride, carbonate, phosphate, and NOM was observed on the performance of SACs in treating pollutants in water when nonradical species dominate. Therefore, the appropriately designed SACs represent game-changers in purifying water vs. AOPs with high efficiency and minimal interference from constituents of polluted water to meet the goals of water sustainability.

Highly selective synthesis of surface FeIV=O with nanoscale zero-valent iron and chlorite for efficient oxygen transfer reactions

High-valent iron-oxo species (FeIV=O) has been a long-sought-after oxygen transfer reagent in biological and catalytic chemistry but suffers from a giant challenge in its gentle and selective synthesis. Herein, we propose a new strategy to synthesize surface FeIV=O (≡FeIV=O) on nanoscale zero-valent iron (nZVI) using chlorite (ClO2-) as the oxidant, which possesses an impressive ≡FeIV=O selectivity of 99%. ≡FeIV=O can be energetically formed from the ferrous (FeII) sites on nZVI through heterolytic Cl-O bond dissociation of ClO2- via a synergistic effect between electron-donating surface ≡FeII and proximal electron-withdrawing H2O, where H2O serves as a hydrogen-bond donor to the terminal O atom of the adsorbed ClO2- thereby prompting the polarization and cleavage of Cl-O bond for the oxidation of ≡FeII toward the final formation of ≡FeIV=O. With methyl phenyl sulfoxide (PMS16O) as the probe molecule, the isotopic labeling experiment manifests an exclusive 18O transfer from Cl18O2- to PMS16O18O mediated by ≡FeIV=18O. We then showcase the versatility of ≡FeIV=O as the oxygen transfer reagent in activating the C-H bond of methane for methanol production and facilitating selective triphenylphosphine oxide synthesis with triphenylphosphine. We believe that this new ≡FeIV=O synthesis strategy possesses great potential to drive oxygen transfer for efficient high-value-added chemical synthesis.

Waste leather derived porous carbon boosted Fenton oxidation towards removal of diethyl phthalate: Mechanism and long-lasting performance

The acceleration of Fe(III)/Fe(II) conversion in Fenton systems is the critical route to achieve the long-lasting generation of reactive oxygen species towards the oxidation of refractory contaminants. Here, we found that waste leather derived porous carbon materials (LPC), as a simple and readily available metal-free biochar material, can promote the Fe(III)/H2O2 system to generate hydroxyl radicals (•OH) for oxidizing a broad spectrum of contaminants. Results of characterizations, theoretical calculations, and electrochemical tests show that the surface carbonyl groups of LPC can provide electron for direct Fe(III) reduction. More importantly, the graphitic-N on surface of LPC can enhance the reactivity of Fe(III) for accelerating H2O2 induced Fe(III) reduction. The presence of LPC accelerates the Fe(III)/Fe(II) redox cycle in the Fe(III)/H2O2 system, sustainable Fenton chain reactions is thus initiated for long-lasting generation of hydroxyl radicals without adding Fe(II). The continuous flow mode that couples in-situ Fenton-like oxidation and LPC with excellent adsorption catalytic properties, anti-coexisting substances interference and reusability performance enables efficient, green and sustainable degradation of trace organic pollutants. Therefore, the application of metal-free carbon materials in Fenton-like system can solve its rate-limiting problem, reduce the production of iron sludge, achieve green Fenton chemistry, and facilitate the actual engineering application of economic and ecological methods to efficiently remove trace organic contaminants from actual water sources.

Iron Single-Atom Catalyst-Enabled Peroxydisulfate Activation Enhances Cathodic Electrochemiluminescence of Tris(bipyridine)ruthenium(II)

The tris(bipyridine)ruthenium(II) (Ru(bpy)₃²⁺)-tripropylamine anodic electrochemiluminescence (ECL) system has been widely applied in commercial bioanalysis. However, the presence of amine compounds in the biological environment results in unavoidable anodic interference signals, which hinder further extensive use of the system. In contrast, the cathodic Ru(bpy)₃²⁺ ECL system can overcome these limitations. The Ru(bpy)₃²⁺/peroxydisulfate (S₂O₈^2-, PDS) ECL system has been extensively employed due to its ability to produce a sulfate radical anion (SO₄^•-) with strong oxidation ability, which enhances the ECL signal. However, the symmetrical molecular structure of PDS makes it challenging to be activated and causes low luminescence efficiency. To address this issue, we propose an efficient Ru(bpy)₃²⁺-based ternary ECL system that uses the iron-nitrogen-carbon single-atom catalyst (Fe-N-C SAC) as an advanced accelerator. Fe-N-C SAC can efficiently activate PDS into reactive oxygen species at a lower voltage, which significantly boosts the cathodic ECL emission of Ru(bpy)₃²⁺. Benefiting from the outstanding catalytic activity of Fe-N-C SAC, we successfully established an ECL biosensor that detects alkaline phosphatase activity with high sensitivity, demonstrating the feasibility of practical application.

Selective degradation of antibiotic in a novel Cu7S4/peroxydisulfate system via heterogeneous Cu(III) formation: Performance, mechanism and toxicity evaluation

Efficient degradation of antibiotic by peroxydisulfate (PDS)-based advanced oxidation processes in complex water environment is challenging due to the interference of impurities and the low activation efficiency of PDS caused by its symmetric structure. Herein, a novel Cu₇S₄/PDS system was developed, which can selectively remove tetracycline hydrochloride (TC) without interference of inorganic ions (e.g., Cl^- and HCO₃^-) and natural organic matter (e.g., humic acid). The results of quenching and probe experiments demonstrated that surface high-valent copper species (Cu(III)), rather than radicals and ¹O₂, are main active species for TC degradation. Cu(III) can be generated via Cu(I)/O₂ and Cu(II)/Cu(I)/PDS systems and the S species on the surface of Cu₇S₄ promotes the cycle of Cu(II)/Cu(I) and Cu(III)/Cu(II), resulting in continuous generation of Cu(III). In addition, the degradation pathways of TC were proposed based on product analysis and DFT theory calculations. The acute toxicity, developmental toxicity and mutagenicity of treated TC were significantly reduced according to the results of toxicity estimation software tool. This study shows a promising Cu₇S₄/PDS system for the degradation and detoxication of antibiotic in complex water environment, while also providing a comprehensive understanding of PDS activation by Cu₇S₄ to generate active Cu(III) species.

Selective activation of peroxymonosulfate govern by B-site metal in delafossite for efficient pollutants degradation: Pivotal role of d orbital electronic configuration

Radical and non-radical oxidation pathways have been universally validated in transition metals (TMs) oxides activated peroxymonosulfate (PMS) processes. However, achieving high efficiency and selectivity of PMS activation remains challenging due to the ambiguous tuning mechanism of TMs sites on PMS activation in thermodynamic scope. Herein, we demonstrated that the exclusive PMS oxidation pathways were regulated by d orbital electronic configuration of B-sites in delafossites (CuBO₂) for Orange I degradation (Co^III 3d⁶ for reactive oxygen species (ROSs) vs. Cr^III 3d³ for electron transfer pathway). The d orbital electronic configuration was identified to affect the orbital overlap extent between 3d of B-sites and O 2p of PMS, which induced B-sites offering different types of hybrid orbital to coordinate with O 2p of PMS, thereby forming the high-spin complex (CuCoO₂@PMS) or the low-spin complex (CuCrO₂@PMS), on which basis PMS was selectively dissociated to form ROSs or achieve electron transfer pathway. As indicated by thermodynamic analysis, a general rule was proposed that B-sites of less than half-filled 3d orbital tended to act as electron shuttle, i.e., Cr^III (3d³), Mn^III (3d⁴), interacting with PMS to execute an electron transfer pathway for degrading Orange I, while B-sites of between half-filled and full-filled 3d orbital preferred to be electron donator, i.e., Co^III (3d⁶), Fe^III (3d⁵), activating PMS to generate ROSs. These findings lay a foundation for the oriented design of TMs-based catalysts from the atomic level according to d orbital electronic configuration optimization, as so to facilitate the achievement of PMS-AOPs with highly selective and efficient remediation of contaminants in water purification practice.

Asymmetrically Coordinated CoB1 N3 Moieties for Selective Generation of High-Valence Co-Oxo Species via Coupled Electron-Proton Transfer in Fenton-like Reactions

High-valence metal species generated in peroxymonosulfate (PMS)-based Fenton-like processes are promising candidates for selective degradation of contaminants in water, the formation of which necessitates the cleavage of OH and OO bonds as well as efficient electron transfer. However, the high dissociation energy of OH bond makes its cleavage quite challenging, largely hampering the selective generation of reactive oxygen species. Herein, an asymmetrical configuration characterized by a single cobalt atom coordinated with boron and nitrogen (CoB₁ N₃ ) is established to offer a strong local electric field, upon which the cleavage of OH bond is thermodynamically favored via a promoted coupled electron-proton transfer process, which serves an essential step to further allow OO bond cleavage and efficient electron transfer. Accordingly, the selective formation of Co(IV)O in a single-atom Co/PMS system enables highly efficient removal performance toward various organic pollutants. The proposed strategy also holds true in other heteroatom doping systems to configure asymmetric coordination, thus paving alternative pathways for specific reactive species conversion by rationalized design of catalysts at atomic level toward environmental applications and more.

Low-coordinated Co-N3 sites induce peroxymonosulfate activation for norfloxacin degradation via high-valent cobalt-oxo species and electron transfer

The identification of reactive species in peroxymonosulfate (PMS) activation triggered by carbon-based single atom catalysts is the key to reveal the pollutant degradation mechanism. Herein, carbon-based single atom catalyst with low-coordinated Co-N₃ sites (Co_SA-N₃-C) was synthesized to active PMS for norfloxacin (NOR) degradation. The Co_SA-N₃-C/PMS system exhibited consistent high performance for oxidizing NOR over a wide pH range (3.0-11.0). The system also achieved complete NOR degradation in different water matrixes, high cycle stability and excellent degradation performance for other pollutants. Theoretical calculations confirmed that the catalytic activity was derived from the favorable electron density of low-coordinated Co-N₃ configuration, which was more conductive to PMS activation than other configurations. Electron paramagnetic resonance spectra, in-situ Raman analysis, solvent exchange (H₂O to D₂O), salt bridge and quenching experiments concluded that high-valent cobalt(IV)-oxo species (56.75%) and electron transfer (41.22%) contributed dominantly to NOR degradation. Moreover, ¹O₂ was generated in the activation process while not involved in pollutant degradation. This research demonstrates the specific contributions of nonradicals in PMS activation over Co-N₃ sites for pollutant degradation. It also offers updated perceptions for rational design of carbon-based single atom catalysts with appropriate coordination structure.

Co3O4 with upshifted d-band center and enlarged specific surface area by single-atom Zr doping for enhanced PMS activation

In this work, single-atom Zr doping is demonstrated to be an effective strategy to enhance the catalytic performance of Co₃O₄ toward peroxymonosulfate (PMS) by modulating electronic structure and enlarging specific surface simultaneously. The d-band center of Co sites upshifts owing to different electronegativity of Co and Zr in the bonds of Co-O-Zr confirmed by density functional theory calculations, leading to enhanced adsorption energy of PMS and strengthened electron transfer from Co^(II) to PMS. The specific surface area of Zr-doped Co₃O₄ increases by 6 times due to the decrease of crystalline size. Consequently, the kinetic constant of phenol degradation with Zr-Co₃O₄ is 10 times higher than that with Co₃O₄ (0.31 vs. 0.029 min^-1). The relative surface specific kinetic constant of Zr-Co₃O₄ for phenol degradation is still 2.29 times higher than that of Co₃O₄ (0.00660 vs. 0.00286 g m^-2 min^-1). In addition, the potential practical applicability of 8Zr-Co₃O₄ was also confirmed by practical wastewater treatment. This study provides deep insights into modifying electronic structure and enlarging specific surface area to enhance the catalytic performance.

Selective and efficient removal of emerging contaminants by sponge-like manganese ferrite synthesized using a solvent-free method: Crucial role of the three-dimensional porous structure

Ubiquitous macromolecular natural organic matter (NOM) in wastewater seriously influences the removal of emerging small-molecule contaminants via heterogeneous advanced oxidation processes because this material covers active sites and quenches reactive oxygen species. Here, sponge-like magnetic manganese ferrite (MnFe₂O₄-S) with a three-dimensional hierarchical porous structure was prepared via a facile solvent-free molten method. Compared with the particle-like structure of MnFe₂O₄-P, the sponge-like structure of MnFe₂O₄-S presents an enlarged specific surface area (112.14 m²·g^-1 vs. 58.73 m²·g^-1) and a smaller macropore diameter (68.2-77.2 nm vs. 946.5 nm). Enlarging the specific surface area increases the exposure of active sites, and adjusting the pore size helps sieve NOM and emerging contaminants. These changes are expected to effectively improve the degradation activity and overcome interference. To confirm the superiority of the sponge-like structure, MnFe₂O₄-S was used to activate peroxymonosulfate (PMS) for the degradation of multiple emerging contaminants, and its ability to degrade bisphenol A with and without humic acid (HA) was compared with that of MnFe₂O₄-P. The degradation activity of MnFe₂O₄-S was 1.6 times greater than that of MnFe₂O₄-P. Moreover, 20 mg·L^-1 HA inhibited the degradation activity of MnFe₂O₄-S by only 7.1%, which was much lower than that obtained for MnFe₂O₄-P (53.4%). In addition, the excellent performance was maintained in multiple water matrices. Notably, under lake water matrices, the degradation activity of MnFe₂O₄-P was inhibited by 35.6% while that of MnFe₂O₄-S was hardly inhibited. More importantly, the MnFe₂O₄-S/PMS system was also applicable to the treatment of actual wastewater and 73.0% and 90.1% of total organic carbon and chemical oxygen demand was removed from bio-treated coking wastewater containing non-biodegradable contaminants and NOM. This study provides an alternative route for the green production of high-activity porous spinel ferrites with environmental anti-interference properties.

Spontaneous Formation of Low Valence Copper on Red Phosphorus to Effectively Activate Molecular Oxygen for Advanced Oxidation Process

Efficient spontaneous molecular oxygen (O₂) activation is an important technology in advanced oxidation processes. Its activation under ambient conditions without using solar energy or electricity is a very interesting topic. Low valence copper (LVC) exhibits theoretical ultrahigh activity toward O₂. However, LVC is difficult to prepare and suffers from poor stability. Here, we first report a novel method for the fabrication of LVC material (P-Cu) via the spontaneous reaction of red phosphorus (P) and Cu²⁺. Red P, a material with excellent electron donating ability and can directly reduce Cu²⁺ in solution to LVC via forming Cu-P bonds. With the aid of the Cu-P bond, LVC maintains an electron-rich state and can rapidly activate O₂ to produce ·OH. By using air, the ·OH yield reaches a high value of 423 μmol g^-1 h^-1, which is higher than traditional photocatalytic and Fenton-like systems. Moreover, the property of P-Cu is superior to that of classical nano-zero-valent copper. This work first reports the concept of spontaneous formation of LVC and develops a novel avenue for efficient O₂ activation under ambient conditions.

Single-Atom MnN5 Catalytic Sites Enable Efficient Peroxymonosulfate Activation by Forming Highly Reactive Mn(IV)-Oxo Species

Four-nitrogen-coordinated transitional metal (MN₄) configurations in single-atom catalysts (SACs) are broadly recognized as the most efficient active sites in peroxymonosulfate (PMS)-based advanced oxidation processes. However, SACs with a coordination number higher than four are rarely explored, which represents a fundamental missed opportunity for coordination chemistry to boost PMS activation and degradation of recalcitrant organic pollutants. We experimentally and theoretically demonstrate here that five-nitrogen-coordinated Mn (MnN₅) sites more effectively activate PMS than MnN₄ sites, by facilitating the cleavage of the O-O bond into high-valent Mn(IV)-oxo species with nearly 100% selectivity. The high activity of MnN₅ was discerned to be due to the formation of higher-spin-state N₅Mn(IV)═O species, which enable efficient two-electron transfer from organics to Mn sites through a lower-energy-barrier pathway. Overall, this work demonstrates the importance of high coordination numbers in SACs for efficient PMS activation and informs the design of next-generation environmental catalysts.

Enhanced Interfacial Electron Transfer by Asymmetric Cu-Ov -In Sites on In2 O3 for Efficient Peroxymonosulfate Activation

Enhancing the peroxymonosulfate (PMS) activation efficiency to generate more radicals is vital to promote the Fenton-like reaction activity, however, how to promote the PMS adsorption and accelerate the interfacial electron transfer to boost its activation kinetics remains a great challenge. Herein, we prepared Cu-doped defect-rich In₂ O₃ (Cu-In₂ O₃ /O_v ) catalysts containing asymmetric Cu-O_v -In sites for PMS activation in water purification. The intrinsic catalytic activity is that the side-on adsorption configuration of the O-O bond (Cu-O-O-In) at the Cu-O_v -In sites significantly stretches the O-O bond length. Meanwhile, the Cu-O_v -In sites increase the electron density near the Fermi energy level, promoting more and faster electron transfer to the O-O bond for generating more SO₄ ⋅^- and ⋅OH. The degradation rate constant of tetracycline achieved by Cu-In₂ O₃ /O_v is 31.8 times faster than In₂ O₃ /O_v , and it shows the possibility of membrane reactor for practical wastewater treatment.

Modified birnessite MnO2 as efficient Fenton-like catalysts through electron transfer process between the simultaneously surface-activated peroxymonosulfate and pollutants

The development of efficient and eco-friendly Mn-based hybrids for the degradation of biorefractory organic pollutants via peroxymonosulfate (PMS) activation is highly desired. In this study, a novel graphite nanosheet (GNs)-based Fe-Mn bimetallic oxide (Fe doped birnessite MnO₂, FeMn/GNs) was synthesized under mild conditions. Compared with monometallic Fe or Mn oxide on GNs, FeMn/GNs exhibited a higher surface area, decreased Mn oxidation states, stronger interaction with GNs, and more active sites for PMS adsorption. Among different Fe/Mn ratios, Fe₂Mn₁/GNs showed the optimum performance for bisphenol A (BPA) degradation with the first-order rate constant of 0.22 min^-1, which was about 8.5 and 12.9 times higher than that of Mn/GNs and Fe/GNs, respectively. Different from the pollutant-catalyst-PMS electron transfer mechanism for Mn/GNs, the direct two-electron transfer in FeMn/GNs+PMS system, was mainly processed between the simultaneously activated BPA and PMS. This was probably based on the double adsorption sites of Fe and Mn species on the same catalyst: PMS was adsorbed by Fe species through hydroxyl groups, while BPA was mainly coordinated with Mn species due to the layered structure and hydrophobicity of the Mn oxide. This study is expected to provide the rational design of efficient Mn-based hybrids for PMS activation.