Indoor Chemistry

A model of the spatiotemporal distribution of ozone-squalene reaction and ozonolysis by-products from human body

Emissions of ozone and its by-products from ozonolysis on human surfaces lead to indoor air pollution. However, the spatiotemporal distribution of such emissions in indoor environments remains unclear, which may introduce bias when assessing human exposure to ozone and ozonolysis byproducts. This study developed a computational fluid dynamics model to describe the physical and chemical processes involved in the emission of ozone-dependent volatile organic compounds from the human body. The results showed that the reaction probability of ozone in the human body depends on the ozone concentration in the bulk air. For ozone concentrations ranging from 28 ppb to 200 ppb, the reaction probabilities ranged from 5.9 × 10-5 to 1.5 × 10-4. The concentrations of ozone and ozonolysis byproducts obtained from the experimental measurements were used for model validation. The ozonolysis by-products were found to be uniformly distributed in the chamber, whereas the ozone distribution showed less uniformity. The ozone concentration near the human surface was approximately 30 %∼50 % of that in the ambient air. Overall, a model was developed to understand the effect of ozone-surface interactions on indoor air quality. This model can be applied to analyze human exposure to ozone and ozonolysis byproducts and for health risk assessment in built environments.

A Near-Explicit Reaction Mechanism of Chlorine-Initiated Limonene: Implications for Health Risks Associated with the Concurrent Use of Cleaning Agents and Disinfectants

Limonene, a key volatile chemical product (VCP) commonly found in personal care and cleaning agents, is emerging as a major indoor air pollutant. Recently, elevated levels of reactive chlorine species during bleach cleaning and disinfection have been reported to increase indoor oxidative capacity. However, incomplete knowledge of the indoor transformation of limonene, especially the missing chlorine chemistry, poses a barrier to evaluating the environmental implications associated with the concurrent use of cleaning agents and disinfectants. Here, we investigated the reaction mechanisms of chlorinated limonene peroxy radicals (Cl-lim-RO2•), key intermediates in determining the chlorine chemistry of limonene, and toxicity of transformation products (TPs) using quantum chemical calculations and toxicology modeling. The results indicate that Cl-lim-RO2• undergoes a concerted autoxidation process modulated by RO2• and alkoxy radicals (RO•), particularly emphasizing the importance of RO• isomerization. Following this generalized autoxidation mechanism, Cl-lim-RO2• can produce low-volatility precursors of secondary organic aerosols. Toxicological findings further indicate that the majority of TPs exhibit increased respiratory toxicity, mutagenicity, and eye/skin irritation compared to limonene, presenting an occupational hazard for indoor occupants. The proposed near-explicit reaction mechanism of chlorine-initiated limonene significantly enhances our current understanding of both RO2• and RO• chemistry while also highlighting the health risks associated with the concurrent use of cleaning agents and disinfectants.

Oxidation Mechanism and Toxicity Evolution of Linalool, a Typical Indoor Volatile Chemical Product

Linalool, a high-reactivity volatile chemical product (VCP) commonly found in cleaning products and disinfectants, is increasingly recognized as an emerging contaminant, especially in indoor air. Understanding the gas-phase oxidation mechanism of linalool is crucial for assessing its impact on atmospheric chemistry and human health. Using quantum chemical calculations and computational toxicology simulations, we investigated the atmospheric transformation and toxicity evolution of linalool under low and high NO/HO2· levels, representing indoor and outdoor environments. Our findings reveal that linalool can undergo the novel mechanisms involving concerted peroxy (RO2·) and alkoxy radical (RO·) modulated autoxidation, particularly emphasizing the importance of cyclization reactions indoors. This expands the widely known RO2·-dominated H-shift-driven autoxidation and proposes a generalized autoxidation mechanism that leads to the formation of low-volatility secondary organic aerosol (SOA) precursors. Toxicological analysis shows that over half of transformation products (TPs) exhibited higher carcinogenicity and respiratory toxicity compared to linalool. We also propose time-dependent toxic effects of TPs to assess their long-term toxicity. Our results indicate that the strong indoor emission coupled with slow consumption rates lead to significant health risks under an indoor environment. The results highlight complex indoor air chemistry and health concerns regarding persistent toxic products during indoor cleaning, which involves the use of linalool or other VCPs.

Ozone Loss on Painted Surfaces: Dependence on Relative Humidity, Aging, and Exposure to Reactive SVOCs

Ozone and its oxidation products result in negative health effects when inhaled. Despite painted surfaces being the most abundant surface in indoor spaces, surface loss remains one of the largest uncertainties in the indoor ozone budget. Here, ozone uptake coefficients (γO3) on painted surfaces were measured in a flow-through reactor where 79% of the inner surfaces were removable painted glass sheets. Flat white paint initially had a high uptake coefficient (8.3 × 10-6) at 20% RH which plateaued to 1.1 × 10-6 as the paint aged in an indoor office over weeks. Increasing the RH from 0 to 75% increased γO3 by a factor of 3.0, and exposure to 134 ppb of α-terpineol for 1 h increased γO3 by a factor of 1.6 at 20% RH. RH also increases α-terpineol partitioning to paint, further increasing ozone loss, but the type of paint (flat, eggshell, satin, semigloss) had no significant effect. A kinetic multilayer model captures the dependence of γO3 on RH and the presence of α-terpineol, indicating the reacto-diffusive depth for O3 is 1 to 2 μm. Given the similarity of the kinetics on aged surfaces across many paint types and the sustained reactivity during aging, these results suggest a mechanism for catalytic loss.

A review of phyto- and microbial-remediation of indoor volatile organic compounds

Volatile organic compounds (VOCs) are crucial air pollutants in indoor environments, emitted from building materials, furniture, consumer products, cleaning products, smoking, fuel combustion, cooking, and other sources. VOCs are also emitted from human beings via breath and whole-body skin. Some VOCs cause dermal/ocular irritation as well as gastrointestinal, neurological, cardiovascular, and/or carcinogenic damage to human health. Because people spend most of their time indoors, active control of indoor VOCs has garnered attention. Phytoremediation and microbial remediation, based on plant and microorganism activities, are deemed sustainable, cost-effective, and public-friendly technologies for mitigating indoor VOCs. This study presents the major sources of VOCs in indoor environments and their compositions. Various herbaceous and woody plants used to mitigate indoor VOCs are summarized and their VOCs removal performance is compared. Moreover, this paper reviews the current state of active phytoremediation and microbial remediation for the control of indoor VOCs, and discusses future directions.

Organic Emissions of Volatile Chemical Products in Canada: Emission Inventories, Indoor-to-Outdoor Transfer, and Regional Impacts

The contribution of volatile chemical products (VCPs) to ambient air pollution has increased following decades of regulating combustion sources. There is a research gap concerning the impact of indoor physicochemical phenomena on VCP emissions. In this work, a bottom-up speciated VCP emission inventory with indoor-outdoor resolution was developed for Canada, an industrialized country with low air pollution levels, whose major cities are among the largest urban areas in North America. VCPs were estimated to account for about 290 kilotons of gaseous organic emissions for a typical year in the 2010s, with more than 60% of emissions occurring indoors. Coatings and cleaners were the most emissive VCP categories. Oxygenated species and saturated aliphatics dominated the chemical profiles of most emissions. Less than 5% of VCP emissions were impacted by indoor physicochemical phenomena. VCP emissions were predicted to account for 0.8-3.2 s-1 of OH reactivity and 0.22-0.52 μg/m3 of secondary organic aerosol formation potential in major urban areas in Canada. Our predictions aligned with previous measurements concerning indoor and outdoor organic pollutant levels, underscoring the important air quality impacts of VCPs relative to other sources. Our results provide helpful insights for future research regarding VCP emissions, especially from indoor spaces.

Indoor cooking and cleaning as a source of outdoor air pollution in urban environments

Indoor sources of air pollution, such as from cooking and cleaning, play a key role in indoor gas-phase chemistry. The focus of the impact of these activities on air quality tends to be indoors, with less attention given to the impact on air quality outside buildings. This study uses the INdoor CHEmical Model in Python (INCHEM-Py) and the Advanced Dispersion Modelling System (ADMS) to quantify the impact cooking and cleaning have on indoor and outdoor air quality for an idealised street of houses. INCHEM-Py has been developed to determine the concentrations of 106 indoor volatile organic compounds at the point they leave a building (defined as near-field concentrations). For a simulated 140 m long street with 10 equi-distant houses undertaking cooking and cleaning activities, the maximum downwind concentration of acetaldehyde increases from a background value of 0.1 ppb to 0.9 ppb post-cooking, whilst the maximum downwind chloroform concentrations increase from 1.2 to 6.2 ppt after cleaning. Although emissions to outdoors are higher when cooking and cleaning happen indoors, the contribution of these activities to total UK emissions of volatile organic compounds is low (less than 1%), and comprise about a quarter of those emitted from traffic across the UK. It is important to quantify these emissions, particularly as continued vehicle technology improvements lead to lower direct emissions outdoors, making indoor emissions relatively more important. Understanding how indoor pollution can affect outdoor environments, will allow better mitigation measures to be designed in the future that can take into account all sources of pollution that contribute to human exposure.

A review of indoor nitrous acid (HONO) pollution: Measurement techniques, pollution characteristics, sources, and sinks

Indoor air quality is of major concern for human health and well-being. Nitrous acid (HONO) is an emerging indoor pollutant, and its indoor mixing ratios are usually higher than outdoor levels, ranging from a few to tens of parts per billion (ppb). HONO exhibits adverse effects to human health due to its respiratory toxicity and mutagenicity. Additionally, HONO can easily undergo photodissociation by ultraviolet light to produce hydroxyl radicals (OH•), which in turn trigger a series of further photochemical oxidation reactions of primary or secondary pollutants. The accumulation of indoor HONO can be attributed to both direct emissions from combustion sources, such as cooking, and secondary formation resulting from enhanced heterogeneous reactions of NOx on indoor surfaces. During the day, the primary sink of indoor HONO is photolysis to OH• and NO. Moreover, adsorption and/or reaction on indoor surfaces, and diffusion to the outside atmosphere contribute to HONO loss both during the day and at night. The level of indoor HONO is also affected by human occupancy, which can influence household factors such as temperature, humidity, light irradiation, and indoor surfaces. This comprehensive review article summarized the research progress on indoor HONO pollution based on indoor air measurements, laboratory studies, and model simulations. The environmental and health effects were highlighted, measurement techniques were summarized, pollution levels, sources and sinks, and household influencing factors were discussed, and the prospects in the future were proposed.

Influence of Ventilation on Formation and Growth of 1-20 nm Particles via Ozone-Human Chemistry

Ozone reaction with human surfaces is an important source of ultrafine particles indoors. However, 1-20 nm particles generated from ozone-human chemistry, which mark the first step of particle formation and growth, remain understudied. Ventilation and indoor air movement could have important implications for these processes. Therefore, in a controlled-climate chamber, we measured ultrafine particles initiated from ozone-human chemistry and their dependence on the air change rate (ACR, 0.5, 1.5, and 3 h-1) and operation of mixing fans (on and off). Concurrently, we measured volatile organic compounds (VOCs) and explored the correlation between particles and gas-phase products. At 25-30 ppb ozone levels, humans generated 0.2-7.7 × 1012 of 1-3 nm, 0-7.2 × 1012 of 3-10 nm, and 0-1.3 × 1012 of 10-20 nm particles per person per hour depending on the ACR and mixing fan operation. Size-dependent particle growth and formation rates increased with higher ACR. The operation of mixing fans suppressed the particle formation and growth, owing to enhanced surface deposition of the newly formed particles and their precursors. Correlation analyses revealed complex interactions between the particles and VOCs initiated by ozone-human chemistry. The results imply that ventilation and indoor air movement may have a more significant influence on particle dynamics and fate relative to indoor chemistry.

Physiology or Psychology: What Drives Human Emissions of Carbon Dioxide and Ammonia?

Humans are the primary sources of CO2 and NH3 indoors. Their emission rates may be influenced by human physiological and psychological status. This study investigated the impact of physiological and psychological engagements on the human emissions of CO2 and NH3. In a climate chamber, we measured CO2 and NH3 emissions from participants performing physical activities (walking and running at metabolic rates of 2.5 and 5 met, respectively) and psychological stimuli (meditation and cognitive tasks). Participants' physiological responses were recorded, including the skin temperature, electrodermal activity (EDA), and heart rate, and then analyzed for their relationship with CO2 and NH3 emissions. The results showed that physiological engagement considerably elevated per-person CO2 emission rates from 19.6 (seated) to 46.9 (2.5 met) and 115.4 L/h (5 met) and NH3 emission rates from 2.7 to 5.1 and 8.3 mg/h, respectively. CO2 emissions reduced when participants stopped running, whereas NH3 emissions continued to increase owing to their distinct emission mechanisms. Psychological engagement did not significantly alter participants' emissions of CO2 and NH3. Regression analysis revealed that CO2 emissions were predominantly correlated with heart rate, whereas NH3 emissions were mainly associated with skin temperature and EDA. These findings contribute to a deeper understanding of human metabolic emissions of CO2 and NH3.

Direct generation of DBPs from city dust during chlorine-based disinfection

Chlorine-based disinfectants, such as sodium hypochlorite, are extensively used in our daily lives. In particular, during the recent Covid-19 pandemic and post-pandemic period, excessive amounts of chlorine-based disinfectants were used both indoors and outdoors to interrupt virus transmission. However, the interaction between disinfectants and city dust during the disinfection process has not been sufficiently evaluated. In this study, we conducted a comprehensive investigation into the intrinsic characteristics (e.g. morphology, size, elemental composition, and organic content, etc.) of dust collected from various indoor and outdoor areas. The results showed that the organic carbon content of indoor dust reached 6.14 %, with a corresponding measured dissolved organic carbon value of 4.17 ± 0.23 mg/g (normalized to the dust weight). Concentrations of regulated DBPs, resulting from the interaction between dust and NaClO, ranged from 57.78 ± 2.72 to 102.80 ± 22.63 µg/g for THMs and from 119.18 ± 6.50 to 285.14 ± 36.95 µg/g for HAAs (normalized to the dust weight). More significantly, using non-target analysis through gas chromatography quadrupole time-of-flight mass spectrometry (GC-qTOF-MS), we identified a total of 68, 89, and 87 types of halogenated DBPs from three typical indoor and outdoor sites (R-QH, C-JS, and W-BR, respectively). These unknown DBPs included compounds with higher toxicity compared to regulated DBPs. These findings highlight that city dust is a significant source of DBP generation during chlorine-based disinfection, posing potential harm to both the ecological environment and human health.

Assessing residential PM2.5 concentrations and infiltration factors with high spatiotemporal resolution using crowdsourced sensors

Building conditions, outdoor climate, and human behavior influence residential concentrations of fine particulate matter (PM2.5). To study PM2.5 spatiotemporal variability in residences, we acquired paired indoor and outdoor PM2.5 measurements at 3,977 residences across the United States totaling >10,000 monitor-years of time-resolved data (10-min resolution) from the PurpleAir network. Time-series analysis and statistical modeling apportioned residential PM2.5 concentrations to outdoor sources (median residential contribution = 52% of total, coefficient of variation = 69%), episodic indoor emission events such as cooking (28%, CV = 210%) and persistent indoor sources (20%, CV = 112%). Residences in the temperate marine climate zone experienced higher infiltration factors, consistent with expectations for more time with open windows in milder climates. Likewise, for all climate zones, infiltration factors were highest in summer and lowest in winter, decreasing by approximately half in most climate zones. Large outdoor-indoor temperature differences were associated with lower infiltration factors, suggesting particle losses from active filtration occurred during heating and cooling. Absolute contributions from both outdoor and indoor sources increased during wildfire events. Infiltration factors decreased during periods of high outdoor PM2.5, such as during wildfires, reducing potential exposures from outdoor-origin particles but increasing potential exposures to indoor-origin particles. Time-of-day analysis reveals that episodic emission events are most frequent during mealtimes as well as on holidays (Thanksgiving and Christmas), indicating that cooking-related activities are a strong episodic emission source of indoor PM2.5 in monitored residences.

Source apportionment for indoor air pollution: Current challenges and future directions

Source apportionment (SA) for indoor air pollution is challenging due to the multiplicity and high variability of indoor sources, the complex physical and chemical processes that act as primary sources, sinks and sources of precursors that lead to secondary formation, and the interconnection with the outdoor environment. While the major indoor sources have been recognized, there is still a need for understanding the contribution of indoor versus outdoor-generated pollutants penetrating indoors, and how SA is influenced by the complex processes that occur in indoor environments. This paper reviews our current understanding of SA, through reviewing information on the SA techniques used, the targeted pollutants that have been studied to date, and their source apportionment, along with limitations or knowledge gaps in this research field. The majority (78 %) of SA studies to date focused on PM chemical composition/size distribution, with fewer studies covering organic compounds such as ketones, carbonyls and aldehydes. Regarding the SA method used, the majority of studies have used Positive Matrix Factorization (31 %), Principal Component Analysis (26 %) and Chemical Mass Balance (7 %) receptor models. The indoor PM sources identified to date include building materials and furniture emissions, indoor combustion-related sources, cooking-related sources, resuspension, cleaning and consumer products emissions, secondary-generated pollutants indoors and other products and activity-related emissions. The outdoor environment contribution to the measured pollutant indoors varies considerably (<10 %- 90 %) among the studies. Future challenges for this research area include the need for optimization of indoor air quality monitoring and data selection as well as the incorporation of physical and chemical processes in indoor air into source apportionment methodology.

Photochemical renoxification on commercial indoor photoactive paint

Surface chemistry plays an important role in the indoor environment owing to the large indoor surface to volume ratio. This study explores the photoreactivity of surfaces painted with a photoactive paint in the presence of NOx. Two types of experiments are performed; illumination of painted surfaces with a nitrate deposit and illumination of painted surfaces in the presence of gaseous NO. For both types of experiments, illumination with a fluorescent bulb causes the greatest change in measured gaseous NOx concentrations. Results show that relative humidity and paint composition play an important role in the photoreactivity of indoor painted surfaces. Painted surfaces could contribute to gas-phase oxidant concentrations indoors.

Impact of Air Pollution on Atopic Dermatitis: A Comprehensive Review

Air pollution is associated with multiple health problems worldwide, contributing to increased morbidity and mortality. Atopic dermatitis (AD) is a common allergic disease, and increasing evidence has revealed a role of air pollution in the development of atopic dermatitis. Air pollutants are derived from several sources, including harmful gases such as nitrogen dioxide (NO2), sulfur dioxide (SO2), and carbon monoxide (CO), as well as particulate matter (PM) of various sizes, and bioaerosols. Possible mechanisms linking air pollution to atopic dermatitis include damage to the skin barrier through oxidative stress, increased water loss, physicochemical injury, and an effect on skin microflora. Furthermore, oxidative stress triggers immune dysregulation, leading to enhanced sensitization to allergens. There have been multiple studies focusing on the association between various types of air pollutants and atopic dermatitis. Since there are many confounders in the current research, such as climate, synergistic effects of mixed pollutants, and diversity of study population, it is not surprising that inconsistencies exist between different studies regarding AD and air pollution. Still, it is generally accepted that air pollution is a risk factor for AD. Future studies should focus on how air pollution leads to AD as well as effective intervention measures.

VOC transport in an occupied residence: Measurements and predictions via deep learning

Monitoring and prediction of volatile organic compounds (VOCs) in realistic indoor settings are essential for source characterization, apportionment, and exposure assessment, while it has seldom been examined previously. In this study, we conducted a field campaign on ten typical VOCs in an occupied residence, and obtained the time-resolved VOC dynamics. Feature importance analysis illustrated that air change rate (ACR) has the greatest impact on the VOC concentration levels. We applied three multi-feature (temperature, relative humidity, ACR) deep learning models to predict the VOC concentrations over ten days in the residence, indicating that the long short-term memory (LSTM) model owns the best performance, with predictions the closest to the observed data, compared with the other two models, i.e., recurrent neural network (RNN) model and gated recurrent unit (GRU) model. We also found that human activities could significantly affect VOC emissions in some observed erupted peaks. Our study provides a promising pathway of estimating long-term transport characteristics and exposures of VOCs under varied conditions in realistic indoor environments via deep learning.

Ozone Loss: A Surrogate for the Indoor Concentration of Ozone-Derived Products

Ozone concentrations tend to be substantially lower indoors than outdoors, largely because of ozone reactions with indoor surfaces. When there are no indoor sources of ozone, a common condition, the net concentration of gaseous products derived from indoor ozone chemistry scales linearly with the difference between outdoor and indoor ozone concentrations, termed "ozone loss." As such, ozone loss is a metric that might be used by epidemiologists to disentangle the adverse health effects of ozone's oxidation products from those of exposure to ozone itself. The present paper examines the characteristics, potential utility, and limitations of the ozone loss concept. We show that for commonly occurring indoor conditions, the ozone loss concentration is directly proportional to the total rate constant for ozone removal on surfaces (ksum) and inversely proportional to the net removal of ozone by air exchange (λ) plus surface reactions (ksum). It follows that the ratio of indoor ozone to ozone loss is equal to the ratio of λ to ksum. Ozone loss is a promising metric for probing potential adverse health effects resulting from exposures to products of indoor ozone chemistry. Notwithstanding its virtues, practitioners using it should be mindful of the limitations discussed in this paper.

Quantifying Ozone-Dependent Emissions of Volatile Organic Compounds from the Human Body

Ozone reactions on human body surfaces produce volatile organic compounds (VOCs) that influence indoor air quality. However, the dependence of VOC emissions on the ozone concentration has received limited attention. In this study, we conducted 36 sets of single-person chamber experiments with three volunteers exposed to ozone concentrations ranging from 0 to 32 ppb. Emission fluxes from human body surfaces were measured for 11 targeted skin-oil oxidation products. For the majority of these products, the emission fluxes linearly correlated with ozone concentration, indicating a constant surface yield (moles of VOC emitted per mole of ozone deposited). However, for the second-generation oxidation product 4-oxopentanal, a higher surface yield was observed at higher ozone concentrations. Furthermore, many VOCs have substantial emissions in the absence of ozone. Overall, these results suggest that the complex surface reactions and mass transfer processes involved in ozone-dependent VOC emissions from the human body can be represented using a simplified parametrization based on surface yield and baseline emission flux. Values of these two parameters were quantified for targeted products and estimated for other semiquantified VOC signals, facilitating the inclusion of ozone/skin oil chemistry in indoor air quality models and providing new insights on skin oil chemistry.

Numerical Simulations of Synthetic Ester Hydrolysis in the Indoor Environment

The hydrolysis of synthetic esters (SEs), including phthalates and adipates, in damp indoor environments can lead to the release of volatile organic compounds implicated in poor air quality and acute health impacts, known as "sick building syndrome" (SBS). We have adapted the multiphase atmospheric chemistry box model, GAMMA, to simulate SE hydrolysis occurring in surface films in the indoor environment, along with multilayer boundary layer mass transfer and ventilation, in order to investigate this phenomenon on a process level. We then applied the model to analyze three scenarios in which hydrolysis has been hypothesized to have a significant impact on indoor air quality. Simulation results suggest that (1) alkaline hydrolysis of bis(2-ethylhexyl) adipate (DEHA) and bis(2-ethylhexyl) phthalate (DEHP) from PVC flooring on damp surfaces alone is not sufficient to explain the levels of 2-ethylhexanol reported in indoor air during episodes of SBS; (2) acute exposure to 2,2,4-trimethyl-1,3-pentanediol (TMPD) may be of concern during and shortly after the application of latex paint on an alkaline surface; and (3) alkaline hydrolysis of SEs following their airborne uptake in aqueous films is not expected to generate considerable amounts of alcohols associated with SBS.

The global burden of schizophrenia and the impact of urbanization during 1990-2019: An analysis of the global burden of disease study 2019

BACKGROUND AND HYPOTHESIS

The burden of schizophrenia is increasing. Assessing the global distribution of schizophrenia and understanding the association between urbanization factors and schizophrenia are crucial.

STUDY DESIGN

We conducted a two-stage analysis utilizing public data from GBD (global burden of disease) 2019 and the World Bank. First, the distribution of schizophrenia burden at the global, regional, and national levels as well as temporal trends was analyzed. Then, four composite indicators of urbanization (including demographic, spatial, economic, and eco-environment urbanization) were constructed from ten basic indicators. Panel data models were used to explore the relationship between urbanization indicators and the burden of schizophrenia.

RESULTS

In 2019, there were 23.6 million people with schizophrenia, an increase of 65.85% from 1990, and the country with the largest ASDR (age-standardized disability adjusted life years rate) was the United States of America, followed by Australia, and New Zealand. Globally, the ASDR of schizophrenia rose with the sociodemographic index (SDI). In addition, six basic urbanization indicators including urban population proportion, employment in industry/services proportion, urban population density, the population proportion in the largest city, GDP, and PM_2.5 concentration were positively associated with ASDR of schizophrenia, with the largest coefficients being urban population density. Overall, demographic, spatial, economic, and eco-environment urbanization all had positive effects on schizophrenia, and the estimated coefficients indicated that demographic urbanization was the most significant influence.

CONCLUSIONS

This study provided a comprehensive description of the global burden of schizophrenia and explored urbanization as a factor contributing to the variation in the burden of schizophrenia, and highlighted policy priorities for schizophrenia prevention in the context of urbanization.

Hydrogen peroxide emissions from surface cleaning in a single-family residence

High levels of reactive chemicals may be emitted to the indoor air during household surface cleaning, leading to poorer air quality and potential health hazards. Hydrogen peroxide (H₂O₂)-based cleaners have gained popularity in recent years, especially in times of COVID-19. Still, little is known regarding the effects of H₂O₂ cleaning on indoor air composition. In this work we monitored time-resolved H₂O₂ concentrations during a cleaning campaign in an occupied single-family residence using a cavity ring-down spectroscopy (CRDS) H₂O₂ analyzer. During the cleaning experiments, we investigated how unconstrained (i.e., "real-life") surface cleaning with a hydrogen peroxide solution influenced the indoor air quality of the house, and performed controlled experiments to investigate factors that could influence H₂O₂ levels including surface area and surface material, ventilation, and dwell time of the cleaning solution. Mean peak H₂O₂ concentrations observed following all surface cleaning events were 135 ppbv. The factors with the greatest effect on H₂O₂ levels were distance of the cleaned surface from the detector inlet, type of surface cleaned, and solution dwell time.

Emerging investigator series: an instrument to measure and speciate the total reactive nitrogen budget indoors: description and field measurements

Reactive nitrogen species (N_r), defined here as all N-containing compounds except N₂ and N₂O, have been shown to be important drivers for indoor air quality. Key N_r species include NO_x (NO + NO₂), HONO and NH₃, which are known to have detrimental health effects. In addition, other N_r species that are not traditionally measured may be important chemical actors for indoor transformations (e.g. amines). Cooking and cleaning are significant sources of N_r, whose emission will vary depending on the type of activity and materials used. Here we present a novel instrument that measures the total gas-phase reactive nitrogen (tN_r) budget and key species NO_x, HONO, and NH₃ to demonstrate its suitability for indoor air quality applications. The tN_r levels were measured using a custom-built heated platinum (Pt) catalytic furnace to convert all N_r species to NO_x, called the tN_r oven. The measurement approach was validated through a series of control experiments, such that quantitative measurement and speciation of the total N_r budget are demonstrated. The optimum operating conditions of the tN_r oven were found to be 800 °C with a sampling flow rate of 630 cubic centimetres per minute (ccm). Oxidized nitrogen species are known to be quantitatively converted under these conditions. Here, the efficiency of the tN_r oven to convert reduced N_r species to NO_x was found to reach a maximum at 800 °C, with 103 ± 13% conversion for NH₃ and 79-106% for selected relevant amines. The observed variability in the conversion efficiency of reduced N_r species demonstrates the importance of catalyst temperature characterization for the tN_r oven. The instrument was deployed successfully in a commercial kitchen, a complex indoor environment with periods of rapidly changing levels, and shown to be able to reliably measure the tN_r budget during periods of longer-lived oscillations (>20 min), typical of indoor spaces. The measured NO_x, HONO and basic N_r (NH₃ and amines) were unable to account for all the measured tN_r, pointing to a substantial missing fraction (on average 18%) in the kitchen. Overall, the tN_r instrument will allow for detailed survey(s) of the key gaseous N_r species across multiple locations and may also identify missing N_r fractions, making this platform capable of stimulating more in-depth analysis in indoor atmospheres.

Different Sources, Fractionation, and Migration of Legacy and Novel Per- and Polyfluoroalkyl Substances between Greenhouse and Open-Field Soils

Perfluoroalkyl substances (PFASs) are widely present in agricultural soils, but their sources and fate in greenhouse soils remain unclear. In this study, the sources, fractionation, and migration of PFASs were compared in the greenhouse and open-field soils of the Fen-Wei Plain, China. The total concentrations of PFASs (Σ₁₇PFAS) were comparable in the greenhouse and open-field soils but with different profiles. Detrended correspondence and correlation analyses indicated that dry deposition was an important source of PFASs in the open-field soils, whereas surface water had a notable contribution to the greenhouse soils due to more frequent irrigation. The PFASs in the soils were mainly present in water-soluble fraction (F1). The F1 proportions of short-chain and long-chain PFASs were negatively correlated with the anion exchange capacity (AEC) and organic carbon content (f_oc) in soil, respectively, with that of short-chain PFASs being higher than long-chain ones. The AEC was significantly higher while f_oc was lower in the greenhouse soil than the open-field soil, leading to lower proportions of F1 for short-chain PFASs while higher for long-chain ones in the greenhouse soil. Frequent irrigation and elevated temperatures promoted the migration of PFASs in greenhouse soil; thus, the Σ₁₇PFAS and F1 exhibited an increasing trend with soil depth.

Measurements of Hydroxyl Radical Concentrations during Indoor Cooking Events: Evidence of an Unmeasured Photolytic Source of Radicals

The hydroxyl radical (OH) is the dominant oxidant in the outdoor environment, controlling the lifetimes of volatile organic compounds (VOCs) and contributing to the growth of secondary organic aerosols. Despite its importance outdoors, there have been relatively few measurements of the OH radical in indoor environments. During the House Observations of Microbial and Environmental Chemistry (HOMEChem) campaign, elevated concentrations of OH were observed near a window during cooking events, in addition to elevated mixing ratios of nitrous acid (HONO), VOCs, and nitrogen oxides (NOX). Particularly high concentrations were measured during the preparation of a traditional American Thanksgiving dinner, which required the use of a gas stove and oven almost continually for 6 h. A zero-dimensional chemical model underpredicted the measured OH concentrations even during periods when direct sunlight illuminated the area near the window, which increases the rate of OH production by photolysis of HONO. Interferences with measurements of nitrogen dioxide (NO2) and ozone (O3) suggest that unmeasured photolytic VOCs were emitted during cooking events. The addition of a VOC that photolyzes to produce peroxy radicals (RO2), similar to pyruvic acid, into the model results in better agreement with the OH measurements. These results highlight our incomplete understanding of the nature of oxidation in indoor environments.

Indoor air pollution and human ocular diseases: Associated contaminants and underlying pathological mechanisms

People spend a long time indoors, especially young children. The risk of indoor pollution on human health is one of the current hotspots in environmental and public health. The human ocular surface is highly susceptible to indoor environment quality. Epidemiological data have linked human ophthalmological disorders with exposure to indoor pollution. In this review, we summarized the adverse impacts of indoor pollution on the human ocular surface. Several studies demonstrated that indoor contaminants including particulate matter, volatile/semi-volatile organic compounds, heavy metals, and fuel combustion and cigarette smoke exposure were associated with the incidence of human dry eye, conjunctivitis, glaucoma, cataracts, age-related macular degeneration, and keratitis. In addition, toxicological investigations revealed that indoor pollution-induced induced chronic inflammation, oxidative damage, and disruption of tight junctions are the main underlying pathological mechanisms for ocular surface diseases. Taken together, this review may expand the understanding of pollution-induced eye disorder and highlight the importance of reducing associated contaminants to decrease their detrimental effects on human eyes.

Real-time measurements of product compounds formed through the reaction of ozone with breath exhaled VOCs

Human presence can affect indoor air quality because of secondary organic compounds formed upon reactions between gaseous oxidant species, e.g., ozone (O₃), hydroxyl radicals (OH), and chemical compounds from skin, exhaled breath, hair and clothes. We assess the gas-phase product compounds generated by reactions of gaseous O₃ with volatile organic compounds (VOCs) from exhaled human breath by real time analysis using a high-resolution quadrupole-orbitrap mass spectrometer (HRMS) coupled to a secondary electrospray ionization (SESI) source. Based on the product compounds identified we propose a reaction mechanism initiated by O₃ oxidation of the most common breath constituents, isoprene, α-terpinene and ammonia (NH₃). The reaction of O₃ with isoprene and α-terpinene generates ketones and aldehydes such as 3,4-dihydroxy-2-butanone, methyl vinyl ketone, 3-carbonyl butyraldehyde, formaldehyde and toxic compounds such as 3-methyl furan. Formation of compounds with reduced nitrogen containing functional groups such as amines, imines and imides is highly plausible through NH₃ initiated cleavage of the C-O bond. The detected gas-phase product compounds suggest that human breath can additionally affect indoor air quality through the formation of harmful secondary products and future epidemiological studies should evaluate the potential health effects of these compounds.

Widespread formation of toxic nitrated bisphenols indoors by heterogeneous reactions with HONO

With numerous structurally diverse indoor contaminants, indoor transformation chemistry has been largely unexplored. Here, by integrating protein affinity purification and nontargeted mass spectrometry analysis (PUCA), we identified a substantial class of previously unrecognized indoor transformation products formed through gas-surface reactions with nitrous acid (HONO). Through the PUCA, we identified a noncommercial compound, nitrated bisphenol A (BPA), from house dust extracts strongly binding to estrogen-related receptor γ. The compound was detected in 28 of 31 house dust samples with comparable concentrations (ND to 0.30 μg/g) to BPA. Via exposing gaseous HONO to surface-bound BPA, we demonstrated it likely forms via a heterogeneous indoor chemical transformation that is highly selective toward bisphenols with electron-rich aromatic rings. We used 15N-nitrite for in situ labeling and found 110 nitration products formed from indoor contaminants with distinct aromatic moieties. This study demonstrates a previously unidentified class of chemical reactions involving indoor HONO, which should be incorporated into the risk evaluation of indoor contaminants, particularly bisphenols.

A review of indoor Gaseous organic compounds and human chemical Exposure: Insights from Real-time measurements

Gaseous organic compounds, mainly volatile organic compounds (VOCs), have become a wide concern in various indoor environments where we spend the majority of our daily time. The sources, compositions, variations, and sinks of indoor VOCs are extremely complex, and their potential impacts on human health are less understood. Owing to the deployment of the state-of-the-art real-time mass spectrometry during the last two decades, our understanding of the sources, dynamic changes and chemical transformations of VOCs indoors has been significantly improved. This review aims to summarize the key findings from mass spectrometry measurements in recent indoor studies including residence, classroom, office, sports center, etc. The sources and sinks, compositions and distributions of indoor VOCs, and the factors (e.g., human activities, air exchange rate, temperature and humidity) driving the changes in indoor VOCs are discussed. The physical and chemical processes of gas-particle partitioning and secondary oxidation processes of VOCs, and their impacts on human health are summarized. Finally, the recommendations for future research directions on indoor VOCs measurements and indoor chemistry are proposed.

Harnessing Waste Heat from Indoor lamps for Sustainable Thermocatalytic Mineralization of Acetaldehyde using Platinized TiO2

This study demonstrates the first reported thermocatalytic oxidation of an indoor volatile organic compound (VOC), acetaldehyde, by harnessing the waste-heat energy from indoor light sources (e.g., halogen lamps) without additional energy inputs. With an optimal Pt-TiO₂ catalyst, the designed catalyst-coated lampshade was successfully activated under waste-heat energy (∼120 °C) and achieved the complete mineralization of CH₃CHO into CO₂ (k = 0.02 min^-1). The catalytic activity of Pt-TiO₂ was extremely dependent on its preparation method which greatly influenced the characteristics (e.g., oxidation state and size) of Pt. The thermocatalytic oxidation mechanism of CH₃CHO over Pt-TiO₂ was investigated, which revealed that O₂ and H₂O sources play vital roles. Although Pt is an expensive noble metal, the thermocatalytic process on the Pt-TiO₂-coated lampshade without additional energy, along with its outstanding activity, can offset the high material cost. The proposed strategy offers a sustainable and feasible method for the degradation of indoor VOCs.

Assessment of indoor air quality and risk of COVID-19 infection in Spanish secondary school and university classrooms

Despite the risk of transmission of SARS-CoV-2, Spanish educational centers were reopened after six months of lockdown. Ventilation was mostly adopted as a preventive measure to reduce the transmission risk of the virus. However, it could also affect indoor air quality (IAQ). Therefore, here we evaluate the ventilation conditions, COVID-19 risk, and IAQ in secondary school and university classrooms in Toledo (central Spain) from November 2020 to June 2021. Ventilation was examined by monitoring outdoor and indoor CO2 levels. CO2, occupancy and hygrothermal parameters, allowed estimating the relative transmission risk of SARS-CoV-2 (Alpha and Omicron BA.1), H r, under different scenarios, using the web app COVID Risk airborne . Additionally, the effect of ventilation on IAQ was evaluated by measuring indoor/outdoor (I/O) concentration ratios of O3, NO2, and suspended particulate matter (PM). University classrooms, particularly the mechanically ventilated one, presented better ventilation conditions than the secondary school classrooms, as well as better thermal comfort conditions. The estimated H r for COVID-19 ranged from intermediate (with surgical masks) to high (no masks, teacher infected). IAQ was generally good in all classrooms, particularly at the university ones, with I/O below unity, implying an outdoor origin of gaseous pollutants, while the source of PM was heterogeneous. Consequently, controlled mechanical ventilation systems are essential in educational spaces, as well as wearing well-fitting FFP2-N95 masks indoors is also highly recommended to minimize the transmission risk of COVID-19 and other airborne infectious diseases.

Recent advances on SOA formation in indoor air, fate and strategies for SOA characterization in indoor air - A review

Recent studies proves that indoor air chemistry differs in many aspects from atmospheric one. People send up to 90 % of their life indoors being exposed to pollutants present in gas, particle and solid phase. Particle phase indoor is composed of particles emitted from various sources, among which there is an indoor source - secondary chemical reactions leading to formation of secondary organic aerosol (SOA). Lately, researchers' attentions turned towards the ultrafine particles, for there are still a lot of gaps in knowledge concerning this field of study, while there is evidence of negative influence of ultrafine particles on human health. Presented review sums up current knowledge about secondary particle formation in indoor environment and development of analytical techniques applied to study those processes. The biggest concern today is studying ROS, for their lifetime in indoor air is very short due to reactions at the very beginning of terpene oxidation process. Another interesting aspect that is recently discovered is monoterpene autooxidation process that leads to HOMs formation that in turn can influence SOA formation yield. A complex studies covering gas phase and particle phase characterization, but also toxicological studies are crucial to fully understand indoor air chemistry leading to ultrafine particle formation.

Interactions of limonene and carvone on titanium dioxide surfaces

Limonene, a monoterpene, found in cleaning products and air fresheners can interact with a variety of surfaces in indoor environments. An oxidation product of limonene, carvone, has been reported to cause contact allergens. In this study, we have investigated the interactions of limonene and carvone with TiO₂, a component of paint and self-cleaning surfaces, at 297 ± 1 K with FTIR spectroscopy and force field-based molecular dynamics and ab initio simulations. The IR absorption spectra and computational methods show that limonene forms π-hydrogen bonds with the surface O-H groups on the TiO₂ surface and that carvone adsorbs on the TiO₂ surface through a variety of molecular interactions including through carbonyl oxygen atoms with Ti⁴⁺ surface atoms, O-H hydrogen bonding (carbonyl O⋯HO) and π-hydrogen bonds with surface O-H groups. Furthermore, we investigated the effects of relative humidity (RH) on the adsorption of limonene and carvone on the TiO₂ surface. The spectroscopic results show that the adsorbed limonene can be completely displaced by water at a relative humidity of ca. 50% RH (∼2 MLs of water) and that 25% of carvone is displaced at ca. 67% RH, which agrees with the calculated free energies of adsorption which show carvone more strongly adsorbs on the surface relative to limonene and thus would be harder to displace from the surface. Overall, this study shows how a monoterpene and its oxidation product interact with TiO₂ and the impact of relative humidity on these interactions.

Gas-Phase Nitrous Acid (HONO) Is Controlled by Surface Interactions of Adsorbed Nitrite (NO2-) on Common Indoor Material Surfaces

Nitrous acid (HONO) is a household pollutant exhibiting adverse health effects and a major source of indoor OH radicals under a variety of lighting conditions. The present study focuses on gas-phase HONO and condensed-phase nitrite and nitrate formation on indoor surface thin films following heterogeneous hydrolysis of NO₂, in the presence and absence of light, and nitrate (NO₃^-) photochemistry. These thin films are composed of common building materials including zeolite, kaolinite, painted walls, and cement. Gas-phase HONO is measured using an incoherent broadband cavity-enhanced ultraviolet absorption spectrometer (IBBCEAS), whereby condensed-phase products, adsorbed nitrite and nitrate, are quantified using ion chromatography. All of the surface materials used in this study can store nitrogen oxides as nitrate, but only thin films of zeolite and cement can act as condensed-phase nitrite reservoirs. For both the photo-enhanced heterogeneous hydrolysis of NO₂ and nitrate photochemistry, the amount of HONO produced depends on the material surface. For zeolite and cement, little HONO is produced, whereas HONO is the major product from kaolinite and painted wall surfaces. An important result of this study is that surface interactions of adsorbed nitrite are key to HONO formation, and the stronger the interaction of nitrite with the surface, the less gas-phase HONO produced.

Detailed Investigation of the Contribution of Gas-Phase Air Contaminants to Exposure Risk during Indoor Activities

Analytical capabilities in atmospheric chemistry provide new opportunities to investigate indoor air. HOMEChem was a chemically comprehensive indoor field campaign designed to investigate how common activities, such as cooking and cleaning, impacted indoor air in a test home. We combined gas-phase chemical data of all compounds, excluding those with concentrations <1 ppt, with established databases of health effect thresholds to evaluate potential risks associated with gas-phase air contaminants and indoor activities. The chemical composition of indoor air is distinct from outdoor air, with gaseous compounds present at higher levels and greater diversity─and thus greater predicted hazard quotients─indoors than outdoors. Common household activities like cooking and cleaning induce rapid changes in indoor air composition, raising levels of multiple compounds with high risk quotients. The HOMEChem data highlight how strongly human activities influence the air we breathe in the built environment, increasing the health risk associated with exposure to air contaminants.

The human oxidation field

Hydroxyl (OH) radicals are highly reactive species that can oxidize most pollutant gases. In this study, high concentrations of OH radicals were found when people were exposed to ozone in a climate-controlled chamber. OH concentrations calculated by two methods using measurements of total OH reactivity, speciated alkenes, and oxidation products were consistent with those obtained from a chemically explicit model. Key to establishing this human-induced oxidation field is 6-methyl-5-hepten-2-one (6-MHO), which forms when ozone reacts with the skin-oil squalene and subsequently generates OH efficiently through gas-phase reaction with ozone. A dynamic model was used to show the spatial extent of the human-generated OH oxidation field and its dependency on ozone influx through ventilation. This finding has implications for the oxidation, lifetime, and perception of chemicals indoors and, ultimately, human health.

Impact of glycol-based solvents on indoor air quality-Artificial fog and exposure pathways of formaldehyde and various carbonyls

Artificial fog is commonly employed in the entertainment industry and indoor household celebrations. The fog is generated from glycol-based solvents, which can also be found in e-cigarettes and personal care products. Although potential health impacts of glycol inhalation are frequently cited by studies of e-cigarette smoking, the dynamics and the chemical composition of glycol-based aerosols have never been studied systematically. The objective of this work is to investigate the impact of glycol-based aerosol on indoor air quality. Specifically, we targeted artificial fogs generated with common glycols, including propylene glycol (PG) and triethylene glycol (TEG). With the aid of a novel aerosol collecting and monitoring instrument setup, we obtained time-resolved aerosol profiles and their chemical compositions in an experimental room. Artificial fog has given rise to a significant amount of ultra-fine particulate matter, demonstrating its negative impact on indoor air quality. Additionally, we found a high concentration (9.75 mM) of formaldehyde and other carbonyls in fog machine fluids stored for months. These compounds are introduced to the indoor air upon artificial fog application. We propose that carbonyls have accumulated from the oxidative decomposition of glycols, initiated by OH radicals and singlet oxygens (¹ O₂ ) and likely sustained by autooxidation. Oxidation of glycols by indoor oxidants has never been reported previously. Such chemical processes can represent an unrecognized source of toxic carbonyl compounds which is also applicable to other glycol-based solvents.

Non-targeted screening of volatile organic compounds in a museum in China Using GC-Orbitrap mass spectrometry

Non-targeted analysis (NTA) was used in identifying volatile organic compounds (VOCs) in a museum in China with the gas chromatograph (GC)-Orbitrap-mass spectrometer (MS). Approximately 230 VOCs were detected, of which 117 were observed at 100% frequency across all sampling sites. Although some were common in indoor environments, most of the detected VOCs were rarely reported in previous studies on museum environments. Some of the detected VOCs were found to be associated with the materials used in furnishings and the chemicals applied in conservation treatment. Spearman's correlation analysis showed that several classes of VOCs were well correlated, suggesting their common sources. Compared with compounds in outdoor air, indoor VOCs had a lower level of unsaturation and more portions of chemically reduced compounds. Hierarchical cluster analysis (HCA) were performed. The results suggested that the sampling adsorbents chosen may have a large impact and that a single type of adsorbent may not be sufficient to cover a wide range of compounds in NTA studies. The MonoTrap adsorbent containing octadecylsilane (ODS) and activated carbon (AC) is suitable for aliphatic polar compounds that contain low levels of oxygen, whereas the MonoTrap ODS and silica gel are good at sampling aliphatic and aromatic hydrocarbons with limited polarity. Principle component analysis (PCA) showed that the indoor VOCs changed significantly at different times in the museum; this may have been caused by the removal of artifacts and refurbishment of the gallery between sampling events. A comparison with compounds identified by chamber emission tests showed that decorative materials may have been one of the main sources of indoor VOCs in the museum. The VOCs identified in the present study are likely to be present in other similar museums; therefore, further examination may be warranted of their potential impacts on cultural heritage artifacts, museum personnel, and visitors.

Source apportionment of children daily exposure to particulate matter

The present study aims to investigate the sources of particulate pollution in indoor and outdoor environments, with focus on determining their contribution to the exposure of children to airborne particulate matter (PM). To this end, parallel indoor and outdoor measurements were carried out for a selection of 40 homes and 5 schools between September 2017 and October 2018. PM2.5 and PM2.5-10 samples were collected during five days in each microenvironment (ME) and analysed by X-Ray Fluorescence (XRF), for the determination of elements, and by a thermal-optical technique, for the measurement of organic and elemental carbon. The source apportionment analysis of the PM composition data, by means of the receptor model SoFi (Source Finder) 8 Pro, resulted in the identification of nine sources: exhaust and non-exhaust emissions from traffic, secondary particles, heavy oil combustion, industry, sea salt, soil, city dust, and an indoor source characterized by high levels of organic carbon. Integrated daily exposure to PM2.5 was on average 21 μg/m³. The organic matter, resulting from cleaning, cooking, smoking and biological material, was the major source contributing by 31% to the PM2.5 exposure. The source city dust, which was highly influenced by the resuspension of dust in classrooms, was the second main source (26%), followed by traffic (24%). The major sources affecting the integrated exposure to PM10, which was on average 33 μg/m³, were the city dust (39%), indoor organics (24%) and traffic (16%). This study provides important information for the design of measures to reduce the exposure of children to PM.

Polyurethane Foam Face Masks as a Dosimeter for Quantifying Personal Exposure to Airborne Volatile and Semi-Volatile Organic Compounds

Airborne volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs) are commonly quantitated by collecting the analytes on solid sorbent tubes or passive air samplers, followed by solvent extraction and instrumental analysis, or by grab bag/canister measurements. We report herein a user-friendly sampling method by breathing through polyurethane foam (PUF) face masks to collect airborne VOCs and SVOCs for chemical analysis. Specifically, dibasic esters, phthalate esters, polycyclic aromatic hydrocarbons, linalool, and nicotine trapped on PUF masks were quantitated by gas chromatography-mass spectrometry analysis as model VOCs and SVOCs. Results showed that the amount of these model VOCs and SVOCs trapped on PUF masks is proportional to the exposure duration. After cross-validation by parallel sampling using XAD-2 packed sorbent tubes, the method was used to quantitate VOCs and SVOCs in a variety of indoor and outdoor environments with varying air concentrations of analytes, temperature, humidity, and wind speed. Because air pollution is considered a major cause of many human diseases and premature deaths and the developed PUF mask sampling method showed high trapping efficiencies for both VOCs and SVOCs, it is believed that the developed sampling method will find wide application in assessing air pollution-associated disease risks with possible extension to more classes of VOCs and SVOCs when coupled with suitable instrumental detection methods.

Indoor Air Pollution and Decision-Making Behavior: An Interdisciplinary Review

The human brain is constantly exposed to air pollutants, some of which might be disruptive or even lethal to certain neurons implicated in abstract features of cognitive function. In this review, we present new evidence from behavioral and neural studies in humans, suggesting a link between indoor fine particulate matter and decision-making behavior. To illustrate this relationship, we use qualitative sources, such as historical documents of the Vietnam War to develop hypotheses of how aerial transmission of pollutants might obstruct alternative choices during the evaluation of policy decisions. We first describe the neural circuits driving decision-making processes by addressing how neurons and their cognate receptors directly evaluate and transduce physical phenomena into sensory perceptions that allow us to decide the best course of action among competing alternatives. We then raise the possibility that indoor air pollutants might also impact cell-signaling systems outside the brain parenchyma to further obstruct the computational analysis of the social environment. We also highlight how particulate matter might be pathologically integrated into the brain to override control of sensory decisions, and thereby perturb selection of choice. These lines of research aim to extend our understanding of how inhalation of airborne particulates and toxicants in smoke, for example, might contribute to cognitive impairment and negative health outcomes.

Reactive uptake of ozone to azo dyes in a coated-wall flow tube

Azo dyes are the most common colorants in consumer products, including clothing and cosmetics. Some azo dyes and their products from reductive degradation are known to be mutagenic, so dermal exposure to these species has been studied extensively. In contrast, oxidative degradation of azo dyes in consumer products has not been studied so thoroughly. In the indoor environment, ozone is ubiquitous, so reactive uptake of ozone to azo dyes could lead to dermal exposure to other classes of degradation products. Here, we report the first measurements of the reactive uptake of ozone to thin films of three widely used commercial azo dyes: sunset yellow, amaranth, and tartrazine. Steady-state uptake was observed for all three dyes, under all conditions investigated, even at the lowest relative humidity (RH) of 0%. The uptake coefficients increased with RH. For sunset yellow at 100 ppb of ozone, the value at 80% RH, (2.0 ± 0.5) × 10^-7, was 2.5 times greater than that at 0% RH, (8 ± 1) × 10^-8, consistent with plasticization of the thin film due to absorption of water. The uptake coefficient of sunset yellow at 80% RH exhibited an inverse dependence on the ozone mixing ratio, approaching an asymptote of 1 × 10^-7 above 250 ppb. At 80% RH and 100 ppb of ozone, the uptake coefficients for the three dyes were similar, (2.0 ± 0.5) × 10^-7 for sunset yellow, (2.7 ± 0.6) × 10^-7 for amaranth, and (3.2 ± 0.3) × 10^-7 for tartrazine, despite differences in structural parameters related to the number of reactive sites at the surface. Together, these results are consistent with ozone diffusing into the thin film and the dye molecules mixing between the layers, such that reaction is not restricted to the surface of the film. Finally, the results are suggestive of a role for azo dyes, including the occurrence of their oxidation products, in indoor chemistry.

Understanding Ozone Transport and Deposition within Indoor Surface Boundary Layers

Ozone-initiated oxidation reactions on indoor surfaces meaningfully alter the chemical composition of indoor air and human exposure to air toxins. Ozone mass transport within the indoor surface boundary layer plays a key role in ozone-surface reaction kinetics. However, limited information is available on detailed ozone transport dynamics near realistic, irregular indoor surfaces. This paper presents a research framework to study the underlying mechanisms of ozone reactions with realistic indoor surfaces based on microscope scanning of surface material and detailed Computational Fluid Dynamics (CFD) simulation. The study results show that indoor surface topography can meaningfully affect ozone mass transport within a surface boundary layer, thereby modulating near-surface ozone concentration gradient and surface uptake. The results also reveal that the effective indoor surface area available for ozone reaction varies with indoor air speed and turbulent air mixing within the boundary layer. The detailed dynamic behaviors of ozone reactions with realistic indoor surfaces provide insights into the implications of pollutant-surface interactions on indoor chemistry and air quality.

Reactions and Products of Squalene and Ozone: A Review

This critical review describes the squalene-ozone (SqOz) reaction, or squalene ozonolysis. Ambient ozone penetrates indoors and drives indoor air chemistry. Squalene, a component of human skin oil, contains six carbon-carbon double bonds and is very reactive with ozone. Bioeffluents from people contribute to indoor air chemistry and affect the indoor air quality, resulting in exposures because people spend the majority of their time indoors. The SqOz reaction proceeds through various formation pathways and produces compounds that include aldehydes, ketones, carboxylic acids, and dicarbonyl species, which have a range of volatilities. In this critical review of SqOz chemistry, information on the mechanism of reaction, reaction probability, rate constants, and reaction kinetics are compiled. Characterizations of SqOz reaction products have been done in laboratory experiments and real-world settings. The effect of multiple environmental parameters (ozone concentration, air exchange rate (AER), temperature, and relative humidity (RH)) in indoor settings are summarized. This critical review concludes by identifying the paucity of available exposure, health, and toxicological data for known reaction products. Key knowledge gaps about SqOz reactions leading to indoor exposures and adverse health outcomes are provided as well as an outlook on where the field is headed.

Atmospheric Autoxidation of Organophosphate Esters

Organophosphate esters (OPEs), widely used as flame retardants and plasticizers, have frequently been identified in the atmosphere. However, their atmospheric fate and toxicity associated with atmospheric transformations are unclear. Here, we performed quantum chemical calculations and computational toxicology to investigate the reaction mechanism of peroxy radicals of OPEs (OPEs-RO₂^•), key intermediates in determining the atmospheric chemistry of OPEs, and the toxicity of the reaction products. TMP-RO₂^• (R₁) and TCPP-RO₂^• (R₂) derived from trimethyl phosphate and tris(2-chloroisopropyl) phosphate, respectively, are selected as model systems. The results indicate that R₁ and R₂ can follow an H-shift-driven autoxidation mechanism under low NO concentration ([NO]) conditions, clarifying that RO₂^• from esters can follow an autoxidation mechanism. The unexpected autoxidation mechanism can be attributed to the distinct role of the ─(O)₃P(═O) phosphate-ester group in facilitating the H-shift of OPEs-RO₂^• from commonly encountered ─OC(═O)─ and ─ONO₂ ester groups in the atmosphere. Under high [NO] conditions, NO can mediate the autoxidation mechanism to form organonitrates and alkoxy radical-related products. The products from the autoxidation mechanism have low volatility and aquatic toxicity compared to their corresponding parent compounds. The proposed autoxidation mechanism advances our current understanding of the atmospheric RO₂^• chemistry and the environmental risk of OPEs.

COVID-19 and Lockdown: The Potential Impact of Residential Indoor Air Quality on the Health of Teleworkers

In addition to outdoor atmospheric contamination, indoor exposure to pollutants is a prime contributor to the overall human exposure, and may condition the expressiveness and severity of respiratory, cardiovascular, and allergic diseases. This situation has worsened due to COVID-19, as people have spent more time indoors to comply with social isolation and mandatory telework. The primary purpose of this study was to assess and compare indoor air quality (IAQ) in a significant sample of dwellings of workers from a Higher Education Institution (HEI) in Portugal who were teleworking and their usual workplace. The levels of carbon dioxide, carbon monoxide, and formaldehyde, particles with equivalent diameters of less than 10 μm, 5 μm, 2.5 μm, 1 μm, 0.5 μm, and 0.3 μm, and ultrafine particles, as well as the level of thermal comfort, were measured at both of the sites assessed. It was found that most of the houses studied, as well as the HEI, had good IAQ, although there were places where the concentrations of some pollutants were above the legal standards. On the other hand, a link was identified between the IAQ and the symptoms and diseases observed in the workers who participated in the study. These results offer the opportunity to make corrective interventions, thereby controlling the sources of pollutants and promoting better ventilation in order to reduce the risk for workers.

Effects of long-term and low-concentration exposures of benzene and formaldehyde on mortality of Drosophila melanogaster

Single-chemical thresholds cannot comprehensively evaluate the risk of chemical mixture exposure in indoor air. Moreover, a large number of researches have focused on short-term and high-concentration co-exposure scenarios related to different species, based on diverse endpoints, which hampers the application and improvement of existing risk evaluation models of chemical mixture exposures. More importantly, current risk evaluation models are not user-friendly for construction practitioners who do not have sufficient toxicological knowledge. Therefore, in this study, an inhalation experiment system and a hazard index (HI) were developed to investigate the risks associated with low-concentration and long-term inhalation exposure scenarios of formaldehyde and benzene, individually and combined, based on Drosophila melanogaster mortality. The results showed that the system exhibited good reproducibility in providing stable exposure concentrations during D. melanogaster life cycle. Furthermore, in a range of experimental concentrations, the interaction between formaldehyde and benzene was additive or synergistic, which was concentration- and ratio-dependent. This study is of great significance in harmonising and providing toxicity data under long-term and low-concentration exposure scenarios, which is beneficial for establishing a new user-friendly risk evaluation model for indoor chemical mixture exposures. It should be noted that the proposed HI value could indicate the hazard degrees of long-term inhalation exposures of formaldehyde and benzene, individually and combined, to D. melanogaster. However, the applicability of this index requires further experiments to evaluate the exposure risks of other volatile organic compounds (VOCs) to D. melanogaster.

Characterization of the off-body squalene ozonolysis on indoor surfaces

Chemical reaction and physical transport characteristics of indoor surfaces play an important role in indoor air quality. This study presents a kinetic model to describe the reaction of ozone with squalene on indoor surfaces in a family house, by incorporating external and internal mass transfer, surface partitioning, and chemical reaction on indoor surfaces. Field experiments were performed in the family house. The first 3-days of data, collected when the house was unoccupied, are used to derive the key parameters in the model, which are then used for predicting the concentrations in other unoccupied days. Comparison of squalene oxidation products during the occupied and unoccupied periods shows that even if the house is unoccupied for several days, the indoor concentrations of 6-methyl-5-hepten-2-one (6-MHO) and 4-oxopentanal (4-OPA) remain substantial, demonstrating that surface reaction of ozone with off-body squalene can significantly impact the composition of indoor air. Model predictions of the three compounds (ozone, 6-MHO, and 4-OPA) agree well with the experimental observations for all test days. Furthermore, we make the first attempt to estimate the duration of typical polyunsaturated aldehydes (TOP, TOT, and TTT), which indicated that these compounds, as well as off-body squalene, can persist on indoor surfaces for a relatively long period in the examined residence.

Viral outbreaks detection and surveillance using wastewater-based epidemiology, viral air sampling, and machine learning techniques: A comprehensive review and outlook

A viral outbreak is a global challenge that affects public health and safety. The coronavirus disease 2019 (COVID-19) has been spreading globally, affecting millions of people worldwide, and led to significant loss of lives and deterioration of the global economy. The current adverse effects caused by the COVID-19 pandemic demands finding new detection methods for future viral outbreaks. The environment's transmission pathways include and are not limited to air, surface water, and wastewater environments. The wastewater surveillance, known as wastewater-based epidemiology (WBE), can potentially monitor viral outbreaks and provide a complementary clinical testing method. Another investigated outbreak surveillance technique that has not been yet implemented in a sufficient number of studies is the surveillance of Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) in the air. Artificial intelligence (AI) and its related machine learning (ML) and deep learning (DL) technologies are currently emerging techniques for detecting viral outbreaks using global data. To date, there are no reports that illustrate the potential of using WBE with AI to detect viral outbreaks. This study investigates the transmission pathways of SARS-CoV-2 in the environment and provides current updates on the surveillance of viral outbreaks using WBE, viral air sampling, and AI. It also proposes a novel framework based on an ensemble of ML and DL algorithms to provide a beneficial supportive tool for decision-makers. The framework exploits available data from reliable sources to discover meaningful insights and knowledge that allows researchers and practitioners to build efficient methods and protocols that accurately monitor and detect viral outbreaks. The proposed framework could provide early detection of viruses, forecast risk maps and vulnerable areas, and estimate the number of infected citizens.