Activation of Peroxymonosulfate by Oxygen Vacancies-Enriched Cobalt-Doped Black TiO2 Nanotubes for the Removal of Organic Pollutants

High-efficiency Ti/TiO2-NTA/PbO2-Nd anode electrochemical oxidation of coking reverse osmosis concentrated (ROC)

In this study, a Ti/TiO2-NTA/PbO2-Nd anode was fabricated for the treatment of coking reverse osmosis concentrate (ROC). The TiO2-NTA interlayer reduced β-PbO2 grain size and increased the PbO2 surface area. Compared to the conventional Ti/PbO2 electrode, the Ti/TiO2-NTA/PbO2-Nd anode demonstrated enhanced electrochemical performance, including higher oxygen evolution potential (OEP), improved hydroxyl radical (•OH) generation, reduced charge transfer resistance, and longer service life. Under optimal conditions (20 mA/cm2, pH 6), COD and TOC removal efficiencies reached 88.0 % and 70.8 %, respectively, with high degradation efficiency, current efficiency, and low energy consumption (0.23 kWh/g COD). The degradation followed pseudo-first-order kinetics. Reactive oxygen species contributions to ROC degradation were identified through quenching experiments. Recyclability tests (6 and 80 cycles) and accelerated service life tests confirmed the anode's excellent performance and stability. 3D EEM and GC-MS analysis further demonstrated the effective removal of refractory organics from ROC. These results highlight its potential for long-term wastewater treatment applications.

Robust titanium suboxide anodes doped by sintering enhance PFOS degradation in water

Per- and Polyfluoroalkyl Substances (PFAS) are a class of persistent organic pollutants that are ubiquitous in the environment, while PFOS is one most representative PFAS of extraordinary persistence. Electrochemical oxidation (EO) is promising for destructive treatment of PFAS in water, and Magnéli phase titanium suboxide (TSO) is regarded as one of only few suitable anode materials for this application. We herein conducted an in-silico survey with Density Functional Theory (DFT) simulations to identify possible beneficial dopant elements, and then prepared TSO anodes doped with Niobium (Nb-TSO) or Cerium (Ce-TSO) by sintering. The doped TSO thus prepared exhibited great robustness, having service lifetimes longer than the pristine Ti4O7 anode, making them useful for EO applications in PFAS treatment. PFOS degradation by EO using Nb-TSO anode was faster than that on the pristine Ti4O7 anode, with energy consumption approximately 1.8 times lower. Further characterizations and DFT simulations reveal that the enhanced efficiency of Nb-TSO anode is attributed to its reduced charge transfer resistance and increased effective electroactive surface area (EESA). The EESA of the Ce-TSO anode was reduced in comparison to the pristine Ti4O7, but PFOS degradation rates normalized by EESA were increased significantly for EO with Ce-TSO anode, due to its increased oxygen evolution potential (OEP) and hydroxyl radical production. The doped TSO anodes prepared in this study by sintering will be useful in EO treatment of PFAS-contaminated waters, with improved service life and performance, and the study provides understandings to guide further improvements of the TSO anodes via doping.

Comparative mechanisms of PDS-activated antibiotic remediation in groundwater via controlled-release materials with different mesoporous catalysts

In situ chemical oxidation (ISCO) using controlled-release oxidants materials (CRMs) is an effective method for the long-term removal of organic pollutants from groundwater. However, the complex hydrodynamic characteristics of groundwater make it extremely challenging to elucidate the mechanisms of pollutant degradation through CRMs. This study aims to construct persulfate-based CRMs using mesoporous MnO2 (Mn-CRMs) and TiO2 (Ti-CRMs) as catalysts to degrade tetracycline (TC) under static and dynamic groundwater. The types and contributions of active species, stoichiometric efficiency of the reactions, TC degradation pathways of the CRMs were compared in the static and dynamic groundwater. The results revealed the active species in the CRMs-based TC degradation depending on the structures of the powder catalysts. In the static and dynamic groundwater, the contribution rate of ·OH and SO4·- in the Mn-CRMs-based TC degradation was nearly 100 %, indicating a complete radical-based degradation pathway. TiO2 with abundant oxygen vacancies produced abundant 1O2 during the PDS activation process. Ti-CRMs showed a contribution rate of 1O2 to the TC degradation of up to 32.05 %, which indicated the co-action of ·OH and 1O2 for degrading TC. The RSE values of the CRMs-based TC degradation were similar to those of TC degradation using powder catalysts. Since the groundwater flow and PDS release, lower PDS concentrations were maintained around the CRMs in the dynamic groundwater, resulting in a higher RSE value. The results in this study provide insights into the removal mechanisms of pollutants in different groundwater and expand the application of ISCO to groundwater remediation.

Electric field-confined synthesis of single atomic TiOxCy electrocatalytic membranes

Electrocatalysis exhibits certain benefits for water purification, but the low performance of electrodes severely hampers its utility. Here, we report a general strategy for fabricating high-performance three-dimensional (3D) porous electrodes with ultrahigh electrochemical active surface area and single-atom catalysts from earth-abundant elements. We demonstrate a binder-free dual electrospinning-electrospraying (DESP) strategy to densely distribute single atomic Ti and titanium oxycarbide (TiOxCy) sub-3-nm clusters throughout interconnected carbon nanofibers (CNs). The composite offers ultrahigh conductivity and mechanical robustness (ultrasonication resistant). The resulting TiOxCy filtration membrane exhibits record-high water purification capability with excellent permeability (~8370 liter m-2 hour-1 bar-1), energy efficiency (e.g., >99% removal of toxins within 1.25 s at 0.022 kWh·m-3 per order), and erosion resistance. The hierarchical design of the TiOxCy membrane facilitates rapid and energy-efficient electrocatalysis through both direct electron transfer and indirect reactive oxygen species (1O2, ·OH, and O2·-, etc.) oxidations. The electric field-confined DESP strategy provides a general platform for making high-performance 3D electrodes.

Novel heterogeneous Fenton catalysts prepared using electrolytic manganese residue for efficient degradation of acetaminophen

Electrolytic manganese residue (EMR) was used as a support to prepare novel EMR-supported catalysts for the heterogeneous Fenton degradation of acetaminophen. Among the five supported catalysts, Co/EMR showed the highest catalytic activity. Several important factors influencing the decay of acetaminophen, including Co loading content, catalyst dosage, H2O2 concentration and initial solution pH, were investigated. Under optimal experimental conditions, acetaminophen degradation rate and the TOC removal efficiency reached 63.8% and 35.7% within 480 min, respectively. Free radical quenching and EPR analysis showed that the high catalytic degradation rate of acetaminophen could be ascribed to the presence of ˙OH and O2˙-. Based on the XPS analysis, the superior catalytic performance of Co/EMR was attributed to the Fe, Mn and Co active sites and oxygen vacancies (Ov) on the surface. Additionally, the potential for degradation of other pollutants and the applicability in real water matrices as well as the reusability of Co/EMR were investigated. This heterogeneous Fenton system could expand possibilities for high-value utilization of the EMR and showed potential for treating PPCPs in wastewater.

Carbonaceous materials in structural dimensions for advanced oxidation processes

Carbonaceous materials have attracted extensive research and application interests in water treatment owing to their advantageous structural and physicochemical properties. Despite the significant interest and ongoing debates on the mechanisms through which carbonaceous materials facilitate advanced oxidation processes (AOPs), a systematic summary of carbon materials across all dimensions (0D-3D nanocarbon to bulk carbon) in various AOP systems remains absent. Addressing this gap, the current review presents a comprehensive analysis of various carbon/oxidant systems, exploring carbon quantum dots (0D), nanodiamonds (0D), carbon nanotubes (1D), graphene derivatives (2D), nanoporous carbon (3D), and biochar (bulk 3D), across different oxidant systems: persulfates (peroxymonosulfate/peroxydisulfate), ozone, hydrogen peroxide, and high-valent metals (Mn(VII)/Fe(VI)). Our discussion is anchored on the identification of active sites and elucidation of catalytic mechanisms, spanning both radical and nonradical pathways. By dissecting catalysis-related factors such as sp2/sp3 C, defects, and surface functional groups that include heteroatoms and oxygen groups in different carbon configurations, this review aims to provide a holistic understanding of the catalytic nature of different dimensional carbonaceous materials in AOPs. Furthermore, we address current challenges and underscore the potential for optimizing and innovating water treatment methodologies through the strategic application of carbon-based catalysts. Finally, prospects for future investigations and the associated bottlenecks are proposed.

Catalytic degradation of Rhodamine B through peroxymonosulfate activation by the Co-doped hydroxyapatite

Supported Co-based catalysts have shown attractive prospects for peroxymonosulfate (PMS) activation. In this work, Co-doped hydroxyapatite (H-Co/HAP) composites were prepared by a simple hydrothermal method. The Co content in H-Co/HAP could reach 71.2 mg/g, while the Co leaching rate remained relatively low. By right of the excellent catalytic performance, the as-prepared H-Co/HAP could achieve 99.02% degradation of Rhodamine B (RhB) within 10 min in the presence of 0.5 mM PMS and a first-order kinetic rate constant of 0.876 min-1. Even after 8 cycles, the RhB degradation efficiency remained at 81.96%. In addition, the effects of vital reaction parameters, including catalyst dosage, PMS dosage, initial pH, humic acid, and coexisting anions, on the catalytic performance in the H-Co/HAP10/PMS system were systematically investigated and discussed. The degradation mechanism of a non-radical (1O2) as the dominant active specie and a radical (•O2- and SO4•-) as the minor active specie was identified through quenching experiments and electron paramagnetic resonance testing. Moreover, possible degradation pathways of RhB were proposed in the H-Co/HAP10/PMS system. Overall, this study offers a meaningful strategy for designing high-content Co-based catalysts to degrade dye molecules in wastewater.

Scalable Ir-Doped NiFe2O4/TiO2 Heterojunction Anode for Decentralized Saline Wastewater Treatment and H2 Production

Wastewater electrolysis cells (WECs) for decentralized wastewater treatment/reuse coupled with H2 production can reduce the carbon footprint associated with transportation of water, waste, and energy carrier. This study reports Ir-doped NiFe2O4 (NFI, ~ 5 at% Ir) spinel layer with TiO2 overlayer (NFI/TiO2), as a scalable heterojunction anode for direct electrolysis of wastewater with circumneutral pH in a single-compartment cell. In dilute (0.1 M) NaCl solutions, the NFI/TiO2 marks superior activity and selectivity for chlorine evolution reaction, outperforming the benchmark IrO2. Robust operation in near-neutral pH was confirmed. Electroanalyses including operando X-ray absorption spectroscopy unveiled crucial roles of TiO2 which serves both as the primary site for Cl- chemisorption and a protective layer for NFI as an ohmic contact. Galvanostatic electrolysis of NH4+-laden synthetic wastewater demonstrated that NFI/TiO2 not only achieves quasi-stoichiometric NH4+-to-N2 conversion, but also enhances H2 generation efficiency with minimal competing reactions such as reduction of dissolved oxygen and reactive chlorine. The scaled-up WEC with NFI/TiO2 was demonstrated for electrolysis of toilet wastewater.

Black titanium oxide: synthesis, modification, characterization, physiochemical properties, and emerging applications for energy conversion and storage, and environmental sustainability

Since its advent in 2011, black titanium oxide (B-TiOx) has garnered significant attention due to its exceptional optical characteristics, notably its enhanced absorption spectrum ranging from 200 to 2000 nm, in stark contrast to its unmodified counterpart. The escalating urgency to address global climate change has spurred intensified research into this material for sustainable hydrogen production through thermal, photocatalytic, electrocatalytic, or hybrid water-splitting techniques. The rapid advancements in this dynamic field necessitate a comprehensive update. In this review, we endeavor to provide a detailed examination and forward-looking insights into the captivating attributes, synthesis methods, modifications, and characterizations of B-TiOx, as well as a nuanced understanding of its physicochemical properties. We place particular emphasis on the potential integration of B-TiOx into solar and electrochemical energy systems, highlighting its applications in green hydrogen generation, CO2 reduction, and supercapacitor technology, among others. Recent breakthroughs in the structure-property relationship of B-TiOx and its applications, grounded in both theoretical and empirical studies, are underscored. Additionally, we will address the challenges of scaling up B-TiOx production, its long-term stability, and economic viability to align with ambitious future objectives.

Advances in the Removal of Organic Pollutants from Water by Photocatalytic Activation of Persulfate: Photocatalyst Modification Strategy and Reaction Mechanism

Environmental pollution caused by persistent organic pollutants has imposed big threats to the health of human and ecological systems. The development of efficient methods to effectively degrade and remove these persistent organic pollutants is therefore of paramount importance. Photocatalytic persulfate-based advanced oxidation technologies (PS-AOTs), which depend on the highly reactive SO4 - radicals generated by the activation of PS to degrade persistent organic pollutants, have shown great promise. This work discusses the application and modification strategies of common photocatalysts in photocatalytic PS-AOTs, and compares the degradation performance of different catalysts for pollutants. Furthermore, essential elements impacting photocatalytic PS-AOTs are discussed, including the water matrix, reaction process mechanism, pollutant degradation pathway, singlet oxygen generation, and potential PS hazards. Finally, the existing issues and future challenges of photocatalytic PS-AOTs are summarized and prospected to encourage their practical application. In particular, by providing new insights into the PS-AOTs, this review sheds light on the opportunities and challenges for the development of photocatalysts with advanced features for the PS-AOTs, which will be of great interests to promote better fundamental understanding of the PS-AOTs and their practical applications.

Co single atom coupled oxygen vacancy on W18O49 nanowires surface to construct asymmetric active site enhanced peroxymonosulfate activation

Enhancing the activation of peroxymonosulfate (PMS) is essential for generating more reactive oxygen species in advanced oxidation process (AOPs). Nevertheless, improving PMS adsorption and expediting interfacial electron transfer to enhance reaction kinetics pose significant challenges. Herein, we construct confined W18O49 nanowires with asymmetric active centers containing Co-Vo-W (Vo: oxygen vacancy). The design incorporates surface-rich Vo and single-atom Co, and the resulting material is employed for PMS activation in water purification. By coupling unsaturated coordinated electrons in Vo with low-valence Co single atoms to construct an the "electron fountainhead", the adsorption and activation of PMS are enhanced. This results in the generation of more active free radicals (SO4•-, •OH, •O2-) and non-free radicals (1O2) for the decomposition of micropollutants. Thereinto, the degradation rate of bisphenol A (BPA) by Co-W18O49 is 32.6 times faster that of W18O49 monomer, which is also much higher than those of other transition-metal-doped W18O49 composites. This work is expected to help to elucidate the rational design and efficient PMS activation of catalysts with asymmetric active centers.

Co-Ti Bimetallic Complex-Induced Phase Modulation of Co@Black TiO2 for Catalytic Hydrogenation of Cinnamaldehyde

Transition-metal-doped black titania, primarily in the anatase phase, shows promise for redox reactions, water splitting, hydrogen generation, and organic pollutant removal, but exploring other titania phases for broader catalytic applications is underexplored. This study introduces a synthetic approach using a Co-Ti bimetallic complex bridged by a 1,10-phenanthroline-5,6-dione ligand as a precursor for the synthesis of cobalt-doped black titania [Co@L2N@b-TiO2]. The synthesis involves precise control of pyrolysis conditions, yielding a distinct structure dominated by the rutile phase over anatase, with active cobalt encapsulated within a nitrogen-doped graphitic layer, primarily as Co0 rather than CoII and CoIII. The synthesized material is employed for the selective hydrogenation of cinnamaldehyde (CAL) to cinnamyl alcohol (COL) under industrially viable conditions. The efficiency and selectivity of Co@L2N@b-TiO2 was compared with other catalysts, including cobalt-doped rutile TiO2 (Co@r-TiO2), anatase TiO2 (Co@a-TiO2), and black titania (Co@b-TiO2) as well as materials pyrolyzed under different atmospheres and temperatures, materials with phenanthroline ligands, and materials lacking any ligands. The superior performance of Co@L2N@b-TiO2 is attributed to its high surface area, stable Co0 within the nitrogen-doped graphitic layer, and composition of rutile and anatase phases of TiO2 and Ti2O3 (referred to as RAT), along with the synergistic interaction between RAT and Co0. These factors significantly influence the efficiency and selectivity of COL over hydrocinnamaldehyde (HCAL) and hydrocinnamyl alcohol (HCOL), indicating potential for broader applications beyond catalysis, particularly in designing of black titania-based materials.

Activation of peroxymonosulfate with natural pyrite-biochar composite for sulfamethoxazole degradation in soil: Organic matter effects and free radical conversion

Peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs) represent an effective method for the remediation of antibiotic-contaminated soils. In this study, a natural pyrite-biochar composite material (FBCx) was developed, demonstrating superior activation performance and achieving a 76% removal rate of SMX from soil within 120 min. There existed different degradation mechanisms for SMX in aqueous and soil solutions, respectively. The production of 1O2 and inherent active species produced by soil slurry played an important role in the degradation process. The combination of electron paramagnetic resonance (EPR) and free radical probe experiments confirmed the presence of free radical transformation processes in soil. Wherein, the·OH and SO4·- generated in soil slurry did not directly involve in the degradation process, but rather preferentially reacted with soil organic matter (SOM) to form alkyl-like radicals (R·), thereby maintaining a high concentration of reactive species in the system. Furthermore, germination and growth promotion of mung bean seeds observed in the toxicity test indicated the environmental compatibility of this remediation method. This study revealed the influence mechanism of SOM in the remediation process of contaminated soil comprehensively, which possessed enormous potential for application in practical environments.

Fenton-like membrane reactor assembled by electron polarization and defect engineering modifying Co3O4 spinel for flow-through removal of organic contaminants

The application of Fenton-like membrane reactors for water purification offers a promising solution to overcome technical challenges associated with catalyst recovery, reaction efficiency, and mass transfer typically encountered in heterogeneous batch reaction modes. This study presents a dual-modification strategy encompassing electron polarization and defect engineering to synthesize Al-doped and oxygen vacancies (OV)-enriched Co3O4 spinel catalysts (ACO-OV). This modification empowered ACO-OV with exceptional performance in activating peroxymonosulfate (PMS) for the removal of organic contaminants. Moreover, the ACO-OV@polyethersulfone (PES) membrane/PMS system achieved organic contaminant removal through filtration (with a reaction kinetic constant of 0.085 ms-1), demonstrating outstanding resistance to environmental interference and high operational stability. Mechanistic investigations revealed that the exceptional catalytic performance of this Fenton-like membrane reactor stemmed from the enrichment of reactants, exposure of reactive sites, and enhanced mass transfer within the confined space, leading to a higher availability of reactive species. Theoretical calculations were conducted to validate the beneficial intrinsic effects of electron polarization, defect engineering, and the confined space within the membrane reactor on PMS activation and organic contaminant removal. Notably, the ACO-OV@PES membrane/PMS system not only mineralized the targeted organic contaminants but also effectively mitigated their potential environmental risks. Overall, this work underscores the significant potential of the dual-modification strategy in designing spinel catalysts and Fenton-like membrane reactors for efficient organic contaminant removal.

Preparation of Ti/SnO2-Sb2O4-La Electrode with TiO2 Nanotubes Intermediate Layer and the Electrochemical Oxidation Performance of Rhodamine B

A La-doped Ti/SnO2-Sb2O4 electrode with TiO2-NTs intermediate layer (Ti/TiO2-NTs/SnO2-Sb2O4-La) was created via the electrodeposition technique. The physicochemical and electrochemical properties of the electrode were analyzed through FESEM, XRD, XPS, CV, and LSV electrochemical tests. The results showed that TiO2-NTs were tightly packed on the surface of Ti substrate, thus improving the binding force of the SnO2-Sb2O4-La coating, offering greater specific surface area, more active spots, higher current response, and longer lifespan for the degradation of rhodamine B. The lifespan of the Ti/TiO2-NTs/SnO2-Sb2O4-La electrode reached 200 min (1000 mA cm-2, 1 M H2SO4), while the actual service life was up to 3699 h. Under the conditions of initial pH 3.0, Na2SO4 concentration of 0.1 M, current density of 30 mA cm-2, and initial rhodamine B concentration of 20 mg L-1, the color and TOC removal rate of rhodamine B reached 100% and 86.13% within 15 and 30 min, respectively. Rhodamine B was decomposed into acids, esters, and other molecular compounds under the action of •OH and SO4•- free radicals and electrocatalysis, and finally completely mineralized into CO2 and H2O. It is anticipated that this work will yield a novel research concept for producing DSA electrodes with superior catalytic efficacy and elevated stability.

Application of valence-variable transition-metal-oxide-based nanomaterials in electrochemical analysis: A review

The construction of materials with rapid electron transfer is considered an effective method for enhancing electrochemical activity in electroanalysis. It has been widely demonstrated that valence changes in transition metal ions can promote electron transfer and thus increase electrochemical activity. Recently, valence-variable transition metal oxides (TMOs) have shown popular application in electrochemical analysis by using their abundant valence state changes to accelerate electron transfer during electrochemical detection. In this review, we summarize recent research advances in valence changes of TMOs and their application in electrochemical analysis. This includes the definition and mechanism of valence change, the association of valence changes with electronic structure, and their applications in electrochemical detection, along with the use of density functional theory (DFT) to simulate the process of electron transfer during valence changes. Finally, the challenges and opportunities for developing and applying valence changes in electrochemical analysis are also identified.

Iron-Based Catalysts with Oxygen Vacancies Obtained by Facile Pyrolysis for Selective Hydrogenation of Nitrobenzene

The development of preparation strategies for iron-based catalysts with prominent catalytic activity, stability, and cost effectiveness is greatly significant for the field of catalytic hydrogenation but still remains challenging. Herein, a method for the preparation of iron-based catalysts by the simple pyrolysis of organometallic coordination polymers is described. The catalyst Fe@C-2 with sufficient oxygen vacancies obtained in specific coordination environment exhibited superior nitro hydrogenation performance, acid resistance, and reaction stability. Through solvent effect experiments, toxicity experiments, TPSR, and DFT calculations, it was determined that the superior activity of the catalyst was derived from the contribution of sufficient oxygen vacancies to hydrogen activation and the good adsorption ability of FeO on substrate molecules.

Enhancing dye degradation using a novel cobalt metal-organic framework as a peroxymonosulfate activator

Among transition metals, cobalt ions exhibit superior catalytic activity in the peroxymonosulfate (PMS) degradation of pollutants. However, practical application is hindered by their high rate of ion leaching and the propensity for particle reunion issues. In this study, a novel cobalt metal-organic framework catalyst, denoted as CUST-565 ([Co3(BTB)2(BIPY)2]·4.5H2O·DMA), was synthesized via a one-step solvothermal method. The obtained crystal was employed as a catalyst to activate PMS for degrading two pollutants, methyl orange (MO) and rhodamine B (RhB), in wastewater. The catalyst demonstrated efficacy in PMS, achieving 97% degradation of MO and 98% degradation of RhB within 30 min at an initial concentration of 20.0 mg L-1. Additionally, various factors affecting dye degradation, including PMS dosage, catalyst dosage, temperature, initial pH, and coexisting anions, were investigated. Radical quenching experiments confirmed the presence of sulfate radicals (SO4˙-), hydroxyl radicals (HO˙), superoxide radicals (O2˙-), and singlet oxygen (1O2) in the system. After four cycles, CUST-565 retained its ability to catalytically degrade approximately 80% of the pollutants. These observed stability and reusability properties, corroborated by a series of characterization analyses before and after use, suggest that CUST-565 exhibits reliable performance. This work contributes to the development of cobalt-PMS catalysts for efficiently degrading dyes in wastewater.

Electrochemically enhanced activation of Co3O4/TiO2 nanotube array anode for persulfate toward high catalytic activity, low energy consumption, and long lifespan performance

Advanced oxidation processes (AOPs) can directly degrade and mineralize organic pollutants (OPs) in water by generating reactive oxygen species with strong oxidizing ability. The development of advanced electrode materials with high catalytic performance, low energy consumption, no secondary pollution, and long lifespan has become a challenge that must be addressed in this field. A heterojunction catalyst loaded with Co3O4 on TDNAs (Co3O4/RTDNAs) was designed and constructed by a simple and efficient pyrolysis (Co3O4/TDNAs) and electrochemical reduction. Co3O4 can be uniformly distributed on the inner wall and surface of the TiO2 nanotubes, enhancing the specific surface area while forming a tight conductive interface with TiO2. This facilitates rapid transmission of electrons, thereby assisting Co3O4 in quickly activating PS to form reactive oxygen species. The Ti3+ and Ov generated in Co3O4/RTDNAs can significantly improve the electrocatalytic degradation of OPs. Also, the interface formed by Co3O4 and RTDNAs will effectively suppress Co2+ leakage, thereby reducing the risk of secondary pollution. When the reaction conditions were 1 mM PMS (PDS) and a current density of 5 mA/cm2 in the EA-PMS (PDS)/Co3O4/RTDNA system, 30 mg/L TC can achieve 83.24 % (81.89 %) removal in 120 min, with very low cobalt ion leaching, while the energy consumption was reduced significantly. Therefore, EA-PS/Co3O4/RTDNA system has strong stability and a high potential for treating the OPs in AOPs.

Boosted Electrocatalytic Degradation of Levofloxacin by Chloride Ions: Performances Evaluation and Mechanism Insight with Different Anodes

As chloride (Cl-) is a commonly found anion in natural water, it has a significant impact on electrocatalytic oxidation processes; yet, the mechanism of radical transformation on different types of anodes remains unexplored. Therefore, this study aims to investigate the influence of chlorine-containing environments on the electrocatalytic degradation performance of levofloxacin using BDD, Ti4O7, and Ru-Ti electrodes. The comparative analysis of the electrode performance demonstrated that the presence of Cl- improved the removal and mineralization efficiency of levofloxacin on all the electrodes. The enhancement was the most pronounced on the Ti4O7 electrode and the least significant on the Ru-Ti electrode. The evaluation experiments and EPR characterization revealed that the increased generation of hydroxyl radicals and active chlorine played a major role in the degradation process, particularly on the Ti4O7 anode. The electrochemical performance tests indicated that the concentration of Cl- affected the oxygen evolution potentials of the electrode and consequently influenced the formation of hydroxyl radicals. This study elucidates the mechanism of Cl- participation in the electrocatalytic degradation of chlorine-containing organic wastewater. Therefore, the highly chlorine-resistant electrocatalytic anode materials hold great potential for the promotion of the practical application of the electrocatalytic treatment of antibiotic wastewater.

The Underlying Catalytic Role of Oxygen Vacancies in Fatty Acid Methyl Esters Ketonization over TiOx Catalysts

Recently, interest in converting bio-derived fatty acid methyl esters (FAMEs) into added-value products has significantly increased. The selectivity of ketonization reaction in the conversion of the FAMEs has significantly hampered the efficiency of this process. Herein, this work reports the preparation of catalysts with different levels of oxygen vacancies while the crystal phase remained unchanged. The catalyst with the highest level of oxygen vacancy exhibited the maximum selectivity. The density functional theory (DFT) simulation showed an increase in interatomic distances leading to the formation of frustrated Lewis pairs (FLPs) upon the creation of oxygen vacancies. The surface measurements, type and density of acid sites of the catalysts, showed that the Lewis acid sites enhanced the selectivity for ketone production; while Bronsted acid sites increased the formation of by-products. Moreover, the ketone formation rate was directly proportional to acid density. The findings of this research provide a different approach for catalyst design, based on defects engineering and their effect on the surface activity, which could be used for enhancing the catalytic performance of novel metal oxides.

Activation of peroxymonosulfate by Cu-Ni-Fe layered double oxides for degradation of butyl 4-hydroxybenzoate: Synergistic effect of oxygen vacancy and Cu(I)

In this study, Cu hybridization coupling oxygen defect engineering was adopted to synthesis of CuNiFe layered double oxides (CuNiFe-LDOs) in peroxymonosulfate (PMS) activation for degradation of methyl 4-hydroxybenzoate. The morphology and crystal structure of CuNiFe-LDOs was characterized in detail, which exhibited regular layered-structure at a Cu:Ni doping ratio of 1:1 and annealing temperature of 400 °C, and presented the crystal of CuxO@Fe3O4-NiO. Besides, the X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR) results demonstrated that abundant oxygen vacancies (OVs) and low oxidation state Cu species were composed in CuNiFe-LDOs400. The Cu1·5Ni1·5Fe1-LDOs400/PMS system showed excellent catalytic performance toward the degradation of butyl 4-hydroxybenzoate (BuP), and resistant to the effect of pH value and background inorganic anions. Based on quenching experiments and EPR measurements, singlet oxygen (1O2) was identified as the dominant active species during the heterogeneous catalytic process, which was generated by the synergistic interaction between OVs-Cu(I) site and PMS. In this process, the electron-drawing property of OVs promoted the adsorption of PMS molecule on Cu(I) site, followed by the accumulation of electron and cleavage of O-O bond to generate intermediate oxygen radical species, which donated one electron to eventually generate singlet oxygen.

A novel copper oxide/titanium membrane integrated with peroxymonosulfate activation for efficient phenolic pollutants degradation

Herein, a novel CuO catalyst functionalized Ti-based catalytic membrane (FCTM) was prepared via the regulated electro-deposition technique followed with low-temperature calcination. The morphology of CuO catalyst and oxygen vacancy (OV) content can be controlled by adjusting the preparation conditions, under optimal condition (400 °C, electrolyte as sulfuric acid), the fern-shaped CuO catalyst was formed and the OV content was up to its highest level. Under the optimal treatment condition, the 4-chlorophenol (4-CP) removal of the membrane filtration combined with peroxymonosulfate (PMS) activation (MFPA) process was up to 98.2% (TOC removal of 88.2%). Mechanism studying showed that the enhanced performance in this system was mainly due to the increased production of singlet oxygen (1O2) via the co-effect of fern-shaped CuO (increased specific surface area) and its fine-tuned OV (precursor of 1O2), which not only synergistically enhanced adsorption ability but also offered more active sites for PMS activation. Theoretical calculations showed that the OV-rich CuO displayed high adsorption energy for PMS molecule, leading to the change in OO and OH bond (tend to 1O2) of the PMS molecule. Finally, the possible three degradation pathways of 4-CP were formed by the electrophilic attacking of 1O2.

Constructing Hollow Multishelled Microreactors with a Nanoconfined Microenvironment for Ofloxacin Degradation through Peroxymonosulfate Activation: Evolution of High-Valence Cobalt-Oxo Species

This study constructed hollow multishelled microreactors with a nanoconfined microenvironment for degrading ofloxacin (OFX) through peroxymonosulfate (PMS) activation in Fenton-like advanced oxidation processes (AOPs), resulting in adequate contaminant mineralization. Among the microreactors, a triple-shelled Co-based hollow microsphere (TS-Co/HM) exhibited optimal performance; its OFX degradation rate was 0.598 min-1, which was higher than that of Co3O4 nanoparticles by 8.97-fold. The structural tuning of Co/HM promoted the formation of oxygen vacancies (VO), which then facilitated the evolution of high-valence cobalt-oxo (Co(IV)═O) and shifted the entire t2g orbital of the Co atom upward, promoting catalytic reactions. Co(IV)═O was identified using a phenylmethyl sulfoxide (PMSO) probe and in situ Raman spectroscopy, and theoretical calculations were conducted to identify the lower energy barrier for Co(IV)═O formation on the defect-rich catalyst. Furthermore, the TS-Co/HM catalyst exhibited remarkable stability in inorganic (Cl-, H2PO4-, and NO3-), organic (humic acid), real water samples (tap water, river water, and hospital water), and in a continuous flow system in a microreactor. The nanoconfined microenvironment could enrich reactants in the catalyst cavities, prolong the residence time of molecules, and increase the utilization efficiency of Co(IV)═O. This work describes an activation process involving Co(IV)═O for organic contaminants elimination. Our results may encourage the use of multishelled structures and inform the design of nanoconfined catalysts in AOPs.

Unveiling the spatially confined oxidation processes in reactive electrochemical membranes

Electrocatalytic oxidation offers opportunities for sustainable environmental remediation, but it is often hampered by the slow mass transfer and short lives of electro-generated radicals. Here, we achieve a four times higher kinetic constant (18.9 min-1) for the oxidation of 4-chlorophenol on the reactive electrochemical membrane by reducing the pore size from 105 to 7 μm, with the predominate mechanism shifting from hydroxyl radical oxidation to direct electron transfer. More interestingly, such an enhancement effect is largely dependent on the molecular structure and its sensitivity to the direct electron transfer process. The spatial distributions of reactant and hydroxyl radicals are visualized via multiphysics simulation, revealing the compressed diffusion layer and restricted hydroxyl radical generation in the microchannels. This study demonstrates that both the reaction kinetics and the electron transfer pathway can be effectively regulated by the spatial confinement effect, which sheds light on the design of cost-effective electrochemical platforms for water purification and chemical synthesis.

Prussian blue analogues derived magnetic FeCo@GC material as high-performance metallic peroxymonosulfate activators to degrade tetrabromobisphenol A over a wide pH range

Metal-organic frame (MOF) materials can effectively degrade organic pollutants, whereas the MOF is rapidly hydrolysed in water and has poor stability and low reusability. However, in the current advanced oxidation process (AOP) system, the removal effect of pollutants under alkaline condition is not ideal. In this study, a magnetic composite material derived from MOF was synthesised and used as a new catalyst for rapid degradation of tetrabromobisphenol A (TBBPA). Compared to precarbonisation, FeCo@GC formed a conductive graphite carbon skeleton, retained the complete rhombododecahedron structure, had a larger specific surface area and provided more active sites for peroxymonosulfate (PMS) activation. The target pollutant TBBPA (20 mg/L) was completely degraded within 30 min, and the mineralisation rate reached 40.98% in the FeCo@GC (150 mg/L) and PMS (1 mM) systems, owing to the synergistic interaction between Fe, Co and graphite carbon. The reactive oxygen species (ROS) involved in the reaction were determined to be SO4•-, ·OH, 1O2 and O2•- by electron paramagnetic resonance and free radical scavenging experiments, and the 1O2 played a dominant role. Based on the results of LC-MS analysis results, the main degradation pathways of TBBPA involve three mechanisms: the debromination reaction, hydroxylation and cleavage of the benzene ring. In addition, compared with previous AOP systems, FeCo@GC/PMS overcomes the disadvantage of poor degradation effect of TBPPA under alkaline conditions, has a wide range pH (3-11) application and has the best effect on TBBPA degradation under alkaline conditions. FeCo@GC has an excellent cycle performance, with a removal rate of re-calcined material of 88.52% after five cycles. Therefore, FeCo@GC can be used as a promising and efficient catalyst for removing environmental organic pollutants.

Visible-light-driven peroxymonosulfate activation by robust TiO2-base nanoparticles for efficient removal of sulfamethoxazole

In this study, a novel bimetallic Co-Mo-TiO2 nanomaterial was fabricated through a simple two-step method, and applied as photocatalyst to activate peroxymonosulfate (PMS) with high efficiency for sulfamethoxazole (SMX) removal under visible light. Nearly 100% of SMX was degraded within 30 min in Vis/Co-Mo-TiO2/PMS system, and its kinetic reaction rate constant (0.099 min-1) was 24.8 times higher compare with the Vis/TiO2/PMS system (0.014 min-1). Moreover, the quenching experiments and the electronic spin resonance analysis results confirmed that both 1O2 and SO4•- were the dominant active species in the optimal system, and the redox cycles of Co3+/Co2+ and Mo6+/Mo4+ promoted the generation of the radicals during the PMS activation process. Additionally, the Vis/Co-Mo-TiO2/PMS system exhibited a wide working pH range, superior catalytic performance toward different pollutants and excellent stability with 92.8% SMX removal capacity retention after three consecutive cycles. The result of density functional theory (DFT) suggested that Co-Mo-TiO2 exhibited a high affinity for PMS adsorption, as indicated by the length O-O bond from PMS and the Eads of the catalysts. Finally, the possible degradation pathway of SMX in optimal system was proposed through intermediate identification and DFT calculation, and a toxicity assessment of the by-products was also conducted.

The Role of Lattice Defects on the Optical Properties of TiO2 Nanotube Arrays for Synergistic Water Splitting

In this study, we report a facile one-step chemical method to synthesize reduced titanium dioxide (TiO2) nanotube arrays (NTAs) with point defects. Treatment with NaBH4 introduces oxygen vacancies (OVs) in the TiO2 lattice. Chemical analysis and optical studies indicate that the OV density can be significantly increased by changing reduction time treatment, leading to higher optical transmission of the TiO2 NTAs and retarded carrier recombination in the photoelectrochemical process. A cathodoluminescence (CL) study of reduced TiO2 (TiO2-x) NTAs revealed that OVs contribute significantly to the emission bands in the visible range. It was found that the TiO2 NTAs reduced for a longer duration exhibited a higher concentration of OVs. A typical CL spectrum of TiO2 was deconvoluted to four Gaussian components, assigned to F, F+, and Ti3+ centers. X-ray photoelectron spectroscopy measurements were used to support the change in the surface chemical bonding and electronic valence band position in TiO2. Electron paramagnetic resonance spectra confirmed the presence of OVs in the TiO2-x sample. The prepared TiO2-x NTAs show an enhanced photocurrent for water splitting due to pronounced light absorption in the visible region, enhanced electrical conductivity, and improved charge transportation.

Dynamic active-site induced by host-guest interactions boost the Fenton-like reaction for organic wastewater treatment

In heterogeneous catalysis, uncovering the dynamic evolution of active sites in the working conditions is crucial to realizing increased activity and enhanced stability of catalyst in Fenton-like activation. Herein, we capture the dynamic changes in the unit cell of Co/La-SrTiO₃ catalyst during the exemplary peroxymonosulfate activation process using X-ray absorption spectroscopy and in situ Raman spectroscopy, revealing the substrate tuned its structural evolution, which is the reversible stretching vibration of O-Sr-O and Co/Ti-O bonds in different orientations. This process effectively promotes the generation of key SO₅* intermediates, which is beneficial to the formation of ¹O₂ and SO₄^•- from persulfate on the Co active site. Density functional theory and X-ray absorption spectroscopy show that the optimized structural distortion enhanced the metal-oxygen bond strength by tuning the e_g orbitals and increased the number of transferred electrons to peroxymonosulfate by about 3-fold, achieving excellent efficiency and stability in removing organic pollutants.

Oxygen vacancies-dominated reactive species generation from peroxymonosulfate activated by MoO3-x for pollutant degradation

Interface oxygen vacancies (OVs) are commonly used to improve the catalytic performance of activators in persulfate-based advanced oxidation processes, but the underlying mechanism was not fully explored. This work reports a facile heat treatment method to regulate OVs in MoO_3-x to elucidate the mechanism of peroxymonosulfate (PMS) activated by OVs to degrade 2,4,4-Trichlorobiphenyl (PCB28). Electron spin resonance, free radical quenching, X-ray photoelectron spectroscopy, and Raman spectroscopy confirmed that both reducing Mo species and OVs of MoO_3-x surface were responsible for PMS activation. Further experiments and Density Function Theory (DFT) calculation suggest that OVs in MoO_3-x induced the formation of superoxide radical (O₂^•-), and then O₂^•- was transformed into singlet oxygen (¹O₂) or mediated PMS activation to generate radicals, which contritbued to 70.2% of PCB28 degradation. The steady-state concentrations of free radical calculated with the kinetics model show that OVs were more favorable to mediate PMS to generate hydroxyl radicals (^•OH) under oxic conditions, while reducing Mo species would like to induce PMS to produce sulfate radicals (SO₄^•-). Overall, this study is dedicated to a new insight into the in-depth mechanism of PMS activation by OVs-rich catalysts and provides a novel strategy for reactive species regulation in PMS based oxidation process.

Activation of peroxymonosulfate with cobalt embedded in layered δ-MnO2 for degradation of dimethyl phthalate: Mechanisms, degradation pathway, and DFT calculation

The sulfate radical-based advanced oxidation processes (SR-AOPs) offer huge potential for the removal of organic pollutants. In this study, Co(II)-intercalated δ-MnO₂ (Co-δ-MnO₂) catalyst was successfully prepared by a simple cation exchange reaction. The obtained Co-δ-MnO₂ exhibited high catalytic performance for the removal of dimethyl phthalate (DMP) under the activation of peroxymonosulfate (PMS), with the degradation efficiency reaching 100% within 6 h. Experiments and theoretical calculations revealed that interlayer Co(II) provided unique active sites in Co-δ-MnO₂. In addition, radical and non-radical pathways were confirmed to play a role in Co-δ-MnO₂/PMS system. ^•OH, SO₄^{• ̶}, and ¹O₂ were identified to be the dominating reactive species in Co-δ-MnO₂/PMS system. This study provided new insights into the design of catalysts and laid a foundation for developing modifiable layered heterogeneous catalysts.

Waste self-heating bag derived iron-based composite with abundant oxygen vacancies for highly efficient Fenton-like degradation of micropollutants

In this study, iron-rich waste self-heating bag was reutilized as the raw material to prepare oxygen vacancies (OV) functionalized iron-based composite (iron oxide (Fe₃O₄)-carbon-vermiculite, viz. OV-ICV), which exhibited excellent performance in the Fenton-like degradation of micropollutants via peroxydisulfate (PDS) activation. Above 95% of 1.0 mg/L carbaryl (CB) was efficiently eliminated in the presence of 0.1 g/L of OV-ICV and 0.5 mmol/L of PDS over a wide pH range of 3-10 within 30 min. Besides, OV-ICV also showed acceptable adaptability, stability, and renewability. Imbedding OV into Fe₃O₄ structure significantly generated more active iron sites and localized electrons, promoted the charge transfer ability, and assisted the redox cycle of ≡Fe(III)/≡Fe(II) for PDS activation. Mechanism investigation demonstrated that superoxide radicals (O₂^•-) derived from the activation of molecular oxygen mediated the generation of H₂O₂, and both of them further enhanced the formation of more sulfate radicals (SO₄^•-) and hydroxyl radicals (^•OH), which led to the efficient degradation and mineralization of CB. Furthermore, the degradation pathways of CB were proposed based on the intermediates identification. This work lays a foundation for the rational reutilization of iron-containing wastes modified with defect engineering in heterogeneous Fenton-like catalysis for the remediation of micropollutants wastewater.

Fabrication of a SnO2-Sb electrode with TiO2 nanotube array as the middle layer for efficient electrochemical oxidation of amaranth dye

Efficient, stable, and easily producible electrodes are useful for treating dye wastewater through electrochemical oxidation. In this study, an Sb-doped SnO₂ electrode with TiO₂ nanotubes as the middle layer (TiO₂-NTs/SnO₂-Sb) was prepared through an optimized electrodeposition process. Analyses of the coating morphology, crystal structure, chemical state, and electrochemical properties revealed that tightly packed TiO₂ clusters provided a larger surface area and more contact points, which is conducive to reinforcing the binding of SnO₂-Sb coatings. Compared with a Ti/SnO₂-Sb electrode without a TiO₂-NT interlayer, the catalytic activity and stability of the TiO₂-NTs/SnO₂-Sb electrode significantly improved (P < 0.05), as reflected by the 21.8% increase in the amaranth dye decolorization efficiency and 200% increase in the service life. The effects of current density, pH, electrolyte concentration, initial amaranth concentration, and the interaction between various combinations of parameters on the electrolysis performance were investigated. Based on response surface optimization, the maximum decolorization efficiency of the amaranth dye could reach 96.2% within 120 min under the following set of optimized parameter values: 50 mg L^-1 amaranth concentration, 20 mA cm^-2 current density, and 5.0 pH. A potential degradation mechanism of the amaranth dye was proposed based on the experimental results of a quenching test, ultraviolet-visible spectroscopy, and high-performance liquid chromatography-mass spectrometry. This study provides a more sustainable method for fabricating SnO₂-Sb electrodes with TiO₂-NT interlayers to treat refractory dye wastewater.

Photosensitive Dye as an Ideal Peroxymonosulfate Activator for Efficient Self-Degradation: A Novel Idea of Using Waste to Treat Waste

Commonly used peroxydisulfate (PS) or peroxymonosulfate (PMS) activation methods have been limited in their practical application due to certain drawbacks, such as high cost, high energy consumption and secondary pollution. In this study, a catalyst-free alizarin green (AG) self-activating PMS catalytic system was constructed based on photosensitization properties of dye, which ultimately achieved efficient degradation of the dye activator, also the target pollutant. Here, 52.5% of the 100 mL mixture of 10 mg/L AG decomposed within 60 min with 1 mM PMS under visible-light irradiation, thereby showing a strong pH adaptation. Mechanism of AG self-activating PMS was revealed that the photo-excited AG can effectively transfer photo-induced electrons to PMS for its activation, which generates reactive oxidizing species dominated by singlet oxygen (¹O₂), and supplemented by hydroxyl radical (•OH), superoxide radical (O₂^•-) and sulfate radical (SO₄^•-) to realize the efficient self-degradation of the dye pollutants. Moreover, such self-catalytic system operated well under natural sunlight irradiation, indicating the great application potential in the actual wastewater treatment. Herein, photosensitive dye acted as an ideal PMS activator realizing its efficient self-degradation, which provides a novel idea of "using waste to treat waste" for developing wastewater treatment process in a high-efficiency and low-consumption way.

Mechanisms and degradation pathways of doxycycline hydrochloride by Fe3O4 nanoparticles anchored nitrogen-doped porous carbon microspheres activated peroxymonosulfate

Peroxymonosulfate (PMS) based advanced oxidation processes have gained widespread attention in refractory antibiotics treatment. In this study, Fe₃O₄ nanoparticles anchored nitrogen-doped porous carbon microspheres (Fe₃O₄/NCMS) were synthesized and applied to PMS heterogeneous activation for doxycycline hydrochloride (DOX-H) degradation. Benefitting from synergy effects of porous carbon structure, nitrogen doping, and fine dispersion of Fe₃O₄ nanoparticles, Fe₃O₄/NCMS showed excellent DOX-H degradation efficiency within 20 min via PMS activation. Further reaction mechanisms revealed that the reactive oxygen species including hydroxyl radicals (•OH) and singlet oxygen (¹O₂) played the dominant role for DOX-H degradation. Moreover, Fe(II)/Fe(III) redox cycle also participated in the radical generation, and nitrogen-doped carbonaceous structures served as the highly active centers for non-radical pathways. The possible degradation pathways and intermediate products accompanying DOX-H degradation were also analyzed in detail. This study provides key insights into the further development of heterogeneous metallic oxides-carbon catalysts for antibiotic-containing wastewater treatment.

Experimental Studies on TiO2 NT with Metal Dopants through Co-Precipitation, Sol-Gel, Hydrothermal Scheme and Corresponding Computational Molecular Evaluations

In the last decade, TiO₂ nanotubes have attracted the attention of the scientific community and industry due to their exceptional photocatalytic properties, opening a wide range of additional applications in the fields of renewable energy, sensors, supercapacitors, and the pharmaceutical industry. However, their use is limited because their band gap is tied to the visible light spectrum. Therefore, it is essential to dope them with metals to extend their physicochemical advantages. In this review, we provide a brief overview of the preparation of metal-doped TiO₂ nanotubes. We address hydrothermal and alteration methods that have been used to study the effects of different metal dopants on the structural, morphological, and optoelectrical properties of anatase and rutile nanotubes. The progress of DFT studies on the metal doping of TiO₂ nanoparticles is discussed. In addition, the traditional models and their confirmation of the results of the experiment with TiO₂ nanotubes are reviewed, as well as the use of TNT in various applications and the future prospects for its development in other fields. We focus on the comprehensive analysis and practical significance of the development of TiO₂ hybrid materials and the need for a better understanding of the structural-chemical properties of anatase TiO₂ nanotubes with metal doping for ion storage devices such as batteries.

A review of advanced oxidation process towards organic pollutants and its potential application in fracturing flowback fluid

Fracturing flowback fluid (FFF) including various kinds of organic pollutants that do harms to people and new treatments are urgently needed. Advanced oxidation processes (AOPs) are suitable methods in consideration with molecular weight, removal cost and efficiency. Here, we summarize the recent studies about AOP treatments towards organic pollutants and discuss the application prospects in treatment of FFF. Immobilization and loading methods of catalysts, evaluation method of degradation of FFF, and continuous treatment process flow are discussed in this review. In conclusion, further studies are urgently needed in aspects of catalyst loading methods, macromolecule organic evaluation methods, industrial process, and pathways of macromolecule organics' decomposition.

3D variable Co species carbon foam enhanced reactive oxygen species generation and ensured long-term stability for water purification

Cobalt (Co) and oxides are the most common catalysts for activating peroxymonosulfate (PMS). However, practical applications of Co-based PMS-advanced oxidation processes are difficult to realize the degradation of the targeted pollutants due to poor yield of reactive oxygen species (ROS) and inaccessible active sites. Here, we designed 3D oxygen vacancy-rich (V_o-rich) variable Co species@carbon foam (Co_xO_y@CF) via coupling solvent-free and pyrolysis strategies for degrading tetracycline by PMS activation. The kinetic rate of optimized (Co@CoO) Co_xO_y@CF-1.0 (1.0 presented the molar ratio of Co²⁺ and 2-methylimidazole) enhanced by an order of magnitude compared to that of ZIFs derivatives (ZIFs-500) (0.073 vs 0.155 min^-1) due to the special structure. The flow-through unit maintained over 90% removal within 12 h, which was far better than that of ZIFs-500/PMS system. We used electrochemical analysis, quenching experiment, in-situ FTIR and Raman spectra to further investigate the possible mechanism of the 3D Co_xO_y@CF-1.0/PMS system. 3D Co_xO_y@CF-1.0 stimulated the production of the metastable catalyst-PMS* complex obtained O₂^- as intermediates accompanied by the redox cycling of Co²⁺/Co³⁺, which created the dominant ROS (more ¹O₂) in the presence of V_o, which was completely different for ZIFs-500/PMS with coordinated and dominant radical and non-radical pathways. This study could large-scale generate variable cobalt-based catalysts for enhanced ROS generation, leading the new insight for boosting practical applications.

Catalytic Degradation of Ciprofloxacin in Aqueous Solution by Peroxymonosulfate Activated with a Magnetic CuFe2O4@Biochar Composite

A magnetic copper ferrite and biochar composite (CuFe2O4@BC) catalyst was prepared by an improved sol-gel calcination method and initially used for the removal of antibiotics ciprofloxacin (CIP) by activated peroxymonosulfate (PMS). Using CuFe2O4@BC as the activator, 97.8% CIP removal efficiency could be achieved in 30 min. After a continuous degradation cycle, CuFe2O4@BC catalyst still exhibited great stability and repeatability and could also be quickly recovered by an external magnetic field. Meanwhile, the CuFe2O4@BC/PMS system presented good stability for metal ion leaching, which was far less than the leaching of metal ions in the CuFe2O4/PMS system. Moreover, the effects of various influencing factors, such as initial solution pH, activator loading, PMS dosage, reaction temperature, humic acid (HA), and the inorganic anions were explored. The quenching experiments and the electron paramagnetic resonance (EPR) analysis manifested that hydroxyl radical (•OH), sulfate radical (SO4•−), superoxide radical (O2•−), and singlet oxygen (1O2) were generated in the CuFe2O4@BC/PMS system, while 1O2 and O2•− are mainly involved in the degradation process. The synergistic effect between CuFe2O4 and BC enhanced the structural stability and electrical conductivity of the material, which promoted the bonding between the catalyst and PMS, resulting in the enhanced catalytic activity of CuFe2O4@BC. This indicates that CuFe2O4@BC activating PMS is a promising remediation technique for CIP-contaminated water.

Electrochemical activation of persulfate by Al-doped blue TiO2 nanotubes for the multipath degradation of atrazine

The combination of electrolysis and persulfate activation (E/PDS) is a cost-effective method for the treatment of refractory organics. However, persulfate is difficult to be activated into radicals at the anode, resulting in insufficient electro-activation efficiency. Herein, Al doped blue TiO₂ nanotube electrodes (Al-bTNT) were first employed as cost-effective anode materials to fully activate PDS to radicals. In E/PDS, the kinetic constant of atrazine removal by Al-bTNT (0.048 min^-1) substantially outperformed the other anodes, including the blue TiO₂ nanotube electrodes (bTNT) (0.024 min^-1), Ti₄O₇ (0.02 min^-1), and B doped diamond (BDD) anodes (0.023 min^-1). The Al-bTNT-E/PDS exhibited a low energy consumption (E_EO = 0.72 kWh m^-3) and a high mineralization rate. Based on the results of electron paramagnetic resonance, quenching experiments, and probe experiments, we propose that atrazine degrades in the Al-bTNT-E/PDS system mainly via a novel radical pathway that involves both·OH and SO₄·^- and the generated SO₄·^- is responsible for the enhanced removal rate. The oxygen vacancies (V_O) generated from interstitial Al may serve as the active sites to adsorb and dissociate the persulfate molecules based on extensive characterizations. The attempt at soil-washing wastewater disposal indicated the synergistic system possessed good potential for future practical application.

Zinc-doped and biochar support strategies to enhance the catalytic activity of CuFe2O4 to persulfate for crystal violet degradation

Sulfate radicals-based Fenton-like technology has placed more emphasis on effectively dealing with the threat of dye wastewater. In this work, the Zn-doped CuFe₂O₄@biochar composite (Cu_0.9Zn_0.1Fe₂O₄@BC) was prepared through the convenient sol-gel pyrolysis process and applied as heterogeneous persulfate (PS) activator for crystal violet (CV) degradation. The crystal morphology and physicochemical properties of Cu_0.9Zn_0.1Fe₂O₄@BC were investigated by scanning electron microscope (SEM), X-ray diffractometer (XRD), vibrating sample magnetometer (VSM), Brunauer-Emmett-Teller method (BET), and X-ray photoelectron spectroscopy (XPS). The morphology of the catalyst changed before and after Zn doping. The crystallite size, lattice constant, saturation magnetization, and oxygen vacancy content increased after doping Zn. Compared with CuFe₂O₄@BC, the CV degradation efficiency of Cu_0.9Zn_0.1Fe₂O₄@BC activating PS increased from 87.7 to 96.9%, and the corresponding reaction rate constant increased by about 3.69 times. The effect of experimental conditions was systematically studied on the degradation progress. The degradation efficiency of CV was 91% after five times cycle experiments. Multiple experiments indicated that SO₄^•-, •OH and O₂^•- predominated for CV degradation. The degradation mechanism of CV in the Cu_0.9Zn_0.1Fe₂O₄@BC/PS system involved both free radical (SO₄^•-, •OH and O₂^•-) and non-free radical pathways (electron transfer). The possible degradation pathways were investigated according to the ultra-performance liquid chromatography mass spectrometry (UPLC-MS) analysis of degradation intermediates. The result showed that Cu_0.9Zn_0.1Fe₂O₄@BC have an excellent catalyst performance, which provides a new strategy for improving catalytic activity.

Fabrication of a SnO2-Sb nano-pin array anode for efficient electrocatalytic oxidation of bisphenol A in wastewater

Electrocatalytic oxidation is a promising technology for eliminating bio-recalcitrant organic pollutants; however, the low efficiency and poor durability of the anodes hinder its practical application. Herein, a SnO₂-Sb nano-pin array (NPA) was fabricated on a RuO₂-based dimensionally stable anode (DSA) via a new hydrothermal-electrodeposition route to prepare a novel anode (SnO₂-Sb NPA). Compared with the conventional SnO₂-Sb/DSA and SnO₂-Sb/Ti anodes, the new SnO₂-Sb NPA anode possessed twice the electroactive surface area and a higher electron transfer efficiency for electrocatalytic reactions. The SnO₂-Sb NPA anode exhibited more than twice the rate constant of bisphenol A (BPA) degradation (0.026 min^-1) and a 120 times prolonged service life in comparison to the conventional SnO₂-Sb/Ti anode. Moreover, the SnO₂-Sb NPA anode performed well in removing BPA from actual wastewater. The mechanism of electrocatalytic degradation involves direct oxidation via electron transfer through the nano-pin surface and oxidation by in situ generated •OH radicals.

Activation of chloride by oxygen vacancies-enriched TiO2 photoanode for efficient photoelectrochemical treatment of persistent organic pollutants and simultaneous H2 generation

Photoelectrochemical (PEC) activation of chloride ions (Cl^-) to degrade persistent organic pollutants (POPs) is a promising strategy for the treatment of industrial saline organic wastewater. However, the wide application of this technology is greatly restricted due to the general photoanode activation of Cl^- with poor capability, the propensity to produce toxic by-products chlorates, and the narrow pH range. Herein, oxygen vacancies-enriched titanium dioxide (O_v-TiO₂) photoanode is explored to strongly activate Cl^- to drive the deep mineralization of POPs wastewater in a wide pH range (2-12) with simultaneous production of H₂. More importantly, nearly no toxic by-product of chlorates was produced during such PEC-Cl system. The degradation efficiency of 4-CP and H₂ generation rate by O_v-TiO₂ were 99.9% within 60 min and 198.2 μmol h^-1 cm^-2, respectively, which are far superior to that on the TiO₂ (33.1% within 60 min, 27.5 μmol h^-1 cm^-2) working electrode. DFT calculation and capture experiments revealed that O_v-TiO₂ with abundant oxygen vacancies is conducive to the activation of Cl^- to produce more reactive chlorine species, evidenced by its high production of free chlorine (48.7 mg L^-1 vs 7.5 mg L^-1 of TiO₂). The as-designed PEC-Cl system in this work is expected to realize the purification of industrial saline organic wastewater coupling with green energy H₂ evolution.

Embedding Co in perovskite MoO3 for superior catalytic oxidation of refractory organic pollutants with peroxymonosulfate

A cobalt (Co)-doped perovskite molybdenum trioxide (α-MoO₃) catalyst (Co-MO) was synthesized by a facile pyrolysis strategy and used for degrading various organic contaminants via peroxymonosulfate (PMS) activation. The doped Co was inserted in the inter space between the octahedron [MoO₆], facilitating the growth of the α-MoO₃ crystal on the [010] direction. This unique structure accelerated the activation of PMS as the Co-MO could function as a carrier for electron transfer to facilitate the Co(II)/Co(III) cycle in the Co-MO/PMS system. As a result, the Co-MO/PMS system showed noticeable activity for removing 100% bisphenol A (BPA) under a broad conditions within 30 min. The radical quenching test and electron paramagnetic resonance analysis revealed that singlet oxygen (¹O₂) was the main active species for BPA degradation in the Co-MO/PMS system, while free radicals, such as O₂^•-, SO₄^•- and •OH, were also produced as the intermediate species. Furthermore, the carrier mechanism may enable the Co-MO/PMS system maintain relatively high performance during repeat use, and also excellent adaptability was revealed by the well function in various water matrices and high activity in degrading various refractory organic pollutants. Our findings pave a useful avenue for the rational design of novel cobalt-doped catalysts with high catalytic performance toward wide environmental applications.

Recent Advances in Black TiO2 Nanomaterials for Solar Energy Conversion

Titanium dioxide (TiO₂) nanomaterials have been widely used in photocatalytic energy conversion and environmental remediation due to their advantages of low cost, chemical stability, and relatively high photo-activity. However, applications of TiO₂ have been restricted in the ultraviolet range because of the wide band gap. Broadening the light absorption of TiO₂ nanomaterials is an efficient way to improve the photocatalytic activity. Thus, black TiO₂ with extended light response range in the visible light and even near infrared light has been extensively exploited as efficient photocatalysts in the last decade. This review represents an attempt to conclude the recent developments in black TiO₂ nanomaterials synthesized by modified treatment, which presented different structure, morphological features, reduced band gap, and enhanced solar energy harvesting efficiency. Special emphasis has been given to the newly developed synthetic methods, porous black TiO₂, and the approaches for further improving the photocatalytic activity of black TiO₂. Various black TiO₂, doped black TiO₂, metal-loaded black TiO₂ and black TiO₂ heterojunction photocatalysts, and their photocatalytic applications and mechanisms in the field of energy and environment are summarized in this review, to provide useful insights and new ideas in the related field.

Mechanistic insights into efficient peroxymonosulfate activation by NiCo layered double hydroxides

The efficient removal of organic refractory pollutants such as dyes and antibiotics in wastewater is crucial for protecting the environment and human health. In this work, a NiCo-layered double hydroxide (NiCo-LDH) with a uniform microspherical, hierarchical structure and a high surface area was successfully synthesized as an effective peroxymonosulfate (PMS) activator for the degradation of various organic dyes and antibiotics. The influence of various parameters on the catalytic activity of the NiCo-LDH was determined. Radical scavenger studies unveiled the major reactive oxygen species (ROSs) generated in the NiCo-LDH/PSM system to be ¹O₂, SO₄^•-, and O₂^•-. Ex-situ X-ray photoelectron spectroscopy (XPS) analysis uncovered the role of Co sites and oxygen vacancy as active sites and revealed the reversible redox properties of NiCo-LDH based on Co²⁺/Co³⁺ cycles. The activation mechanism and Rhodamine B (RhB) degradation pathways were experimentally studied and proposed. The NiCo-LDH is highly versatile, reusable and stable as shown by post-catalysis characterizations. This work shows the excellent catalysis performances and provides insights into the activation mechanism of PMS by NiCo-LDH for organic pollutant remediation.

Oxygen vacancy-mediated peroxydisulfate activation and singlet oxygen generation toward 2,4-dichlorophenol degradation on specific CuO1-x nanosheets

Durable and stable removal of 2,4-dichlorophenpl (2,4-DCP) by CuO_1-x nanosheets is reported. CuO_1-x nanosheets were fabricated by a simple defect engineering strategy and greatly increased the efficiency of peroxydisulfate (PDS) activation to improve 2,4-DCP removal by introducing abundant oxygen vacancy (V_o) to produce an electron-rich surface. Results showed that CuO_1-x nanosheets exposed more V_o as active sites for PDS activation as compared with that of CuO nanoparticles, giving rise to dramatic enhancement of catalytic performance with ultrahigh reaction rate that is qualified for serving in flow filtration system, completely degrading 100 mg L^-1 of 2,4-DCP within 3 s of residence time. Besides, experimental studies confirmed that ¹O₂ generated by V_o - mediated PDS activation plays the dominate role in the degradation of contaminants. Relative to the previously reported CuO/PDS systems, the obtained CuO_1-x nanosheets demonstrated 2.7 times higher specific PDS activity and 67 times higher specific CuO activity for 2,4-DCP removal. Our study not only improves the fundamental understanding of active sites in morphologically tunable metal oxides but also proposes a guideline for future research and engineering application of persulfate.

Single cobalt atom anchored on carbon nitride with cobalt nitrogen/oxygen active sites for efficient Fenton-like catalysis

As one of the tactics to produce reactive oxygen radicals, the Fenton-like process has been widely developed to solve the increasingly severe problem of environmental pollution. However, establishing advanced mediators with sufficient stability and activity for practical application is still a long-term objective. Herein, we proposed a facile strategy through polymeric carbon nitride (pCN) in-situ growth single cobalt atom for efficient degradation of antibiotics by peroxymonosulfate (PMS) activation. X-ray absorption spectroscopy and high-angle annular dark field-scanning transmission electron microscopy prove the single cobalt atoms are successfully anchored on pCN. Moreover, extended X-ray absorption fine structure analysis shows that the embedded cobalt atoms are constructed by covalently forming the Co-N bond and Co-O bond, which endow the single-atom cobalt catalyst with high stability. Experiment results indicate that the prepared single-atom cobalt catalyst can be used for efficient PMS activation catalytic degradation of tetracycline with a high degradation rate of 98.7 % in 60 min. And the CoN/O sites with single cobalt atoms serve as the active site for generating active radical species (singlet oxygen) from PMS activation. This work may expand the strategy for constructing single-atom catalysts and extend its application for the advanced oxidation process.