Technical Challenges of Molecular-Imprinting-Based Optical Sensors for Environmental Pollutants

Chitosan-stabilized copper oxide nanoparticles: A novel colorimetric approach for ascorbic acid sensing

Ascorbic acid is implicated in various diseases such as scurvy, oxidative stress, cardiovascular diseases, etc. Herein, for the first time, a simple and efficient strategy was used to synthesize cross-linked chitosan-stabilized copper oxide nanoparticles (CuO@C-CS) as a non-toxic and biodegradable-based approach. Various spectroscopic techniques, including FTIR, XRD, SEM, EDX, TGA, and elemental mapping, confirmed the synthesis of the material. The synthesized nanozyme (CuO@C-CS) was used as a peroxidase mimic for the detection of ascorbic acid, through the chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB) with the assistance of hydrogen peroxide. The synthesized mimic enzyme transforms colorless TMB into oxTMB. The sensing of ascorbic acid was achieved through the peroxidase-like inhibitory activity of the mimic enzyme along with the reduction of oxTMB. The sensor system was fine-tuned, and it showed a limit of detection, a limit of quantification, a linear range, and regression coefficient values of 0.24 μM, 0.80 μM, 1-96 μM, and 0.999, respectively. The fabricated sensor was very selective in the presence of various potential interferents. The proposed sensor was successfully applied to commercially available orange juices for the qualitative and quantitative determination of ascorbic acid. The sensor can be used for the determination of ascorbic acid in biomedical and food samples.

Specific and sensitive detection of capsaicin for edible oils authentication using fluorescent molecularly imprinted silica particles

In this study, we developed two fluorescent molecularly imprinted polymers (FMIPs) for sensitive detection of capsaicin to distinguish the recycled edible oils. Utilizing a catalyst-free molecular imprinting approach and N-vanillylnonanamide (capsaicin analog) as the template, two types of FMIPs were synthesized utilizing fluorescent monomers coupled with fluorescein isothiocyanate (FFMIP) and rhodamine B isothiocyanate (RFMIP). Both FFMIP and RFMIP showed high selectivity (imprinting factors of 2.9 and 10.6, respectively) and specificity (cross-reactivity factors ranging from of 2.4-3.8 and 1.9-16.4, respectively) to capsaicin, which were superior to their positive control polymers of FFMIP-N and RFMIP-N synthesized using an ammonia catalyst. The FMIP-based detection systems could quantitatively analyze spiked capsaicin in edible oil with detection limits of 22-38 nM and a detection time less than 10 min. Besides, these FMIPs are easy to be produced in mass and cost-effective, offering a powerful tool for rapid detection of capsaicin in food authentication.

Sensing technology empowering food safety: research progress of SERS-assisted multimodal biosensing toward food hazard factors

Food is the main source of human energy and nutrition, but once it is contaminated with hazardous factors, such as biotoxins, pesticide residues, etc., it will seriously damage health. This paper reviews the research progress of biosensors based on surface-enhanced Raman scattering (SERS) in the detection of food hazard factors. First, the basic principle, substrate and assay mode of SERS technology, as well as related design and sensing strategy mechanisms, are introduced. Then, the design idea of multimodal biosensors combining SERS with microfluidic, fluorescence, colorimetric, electrochemical (EC), molecular imprinting and other technologies is expounded to improve the analysis accuracy and specificity. Then the application results of multimodal biosensors based on SERS sensing toward food hazard factors are discussed, and the necessity of its development is illustrated. Finally, the future development direction of this field is prospected, which provides a reference for promoting the research and application of multimodal biosensors based on SERS.

A ratiometric fluorescence sensor based on molecular imprinting technology for rapid and visual detection of norfloxacin

The problem of excessive use and abuse of antibiotics in the environment and food biology is becoming increasingly prominent, and norfloxacin (NOR) is widely used as an inexpensive and broad-spectrum antibiotic drug. Therefore, rapid and effective detection of antibiotics and residues in biological samples has become a demand of the times. This article describes a ratiometric fluorescence sensor based on molecular imprinting technology for the rapid and visual detection of NOR. A linear relationship (R2 = 0.9977) was established between the ratio of self-fluorescence of NOR to the reference fluorescence from rhodamine B and NOR concentration (0-400 μg/L), with a detection limit as low as 0.38 ng/mL, the detection time is as short as 8 min, and a high imprinting factor of 4.5. Visual detection of NOR was achieved through the change of fluorescence color from red to blue-purple. Satisfactory detection accuracy (RSD < 3.5 %) and recovery rate (90.03-102.10 %) were obtained through real sample spiking experiments and were highly consistent with HPLC-UV results. This ratiometric fluorescent sensor based on molecularly imprinting technology with high selectivity, sensitivity, rapidity, and visualization for detecting NOR in complex matrices has broad application prospects in the fields of rapid screening and on-site detection.

pH-regulated CQDs@Eu/GMP ICP sensor array and its fingerprinting on 96-well plates: Toward point-of-use/specific identification and quantitation of six tetracyclines in animal farm wastewater, milks and milk-derivative products

Herein, a "lab-on-an-AIE@Ln/ICP" sensor array was constructed by employing aggregation-induced emission carbon quantum dots (AIE-CQDs) as the guest and Eu/GMP ICP as the host. Based on the antenna effect (AE) and reductive photo-induced electron transfer (r-PET) between CQDs@Eu/GMP ICPs and tetracyclines (TCs), the as-constructed sensor produced satisfactorily dual-emitting fluorescence. By combining pH regulation with principal component analysis (PCA), the underlying fingerprinting patterns realized the specific identification and quantitation of six TCs in animal farm wastewater, milks and milk-derivative products. Through the aggregation-induced quenching of CQDs@Eu/GMP ICPs on test strips, the discernible fluorescence alterations were successfully utilized for developing smartphone-based visual assay. To sum up, the prominent novelty of this study lies in that based on the comprehensive principles of AE and r-PET along with combination of pH-adjustment and PCA, the pioneered sensor assay achieves specifically identifying and sensing individual TCs for their rapid and on-site detection in animal-derived matrices.

Facile Synthesis of Silsesquioxane-Based Hybrid Crosslinked Polymers via One-Step Amine-Ene Reaction for Efficient Adsorption of Various Pollutants

The rapid advancement of industrial production has led to an increase in water pollutants, posing a significant threat to public health. With the deepening of research on pollutant adsorbents. The application of silsesquioxane-based cross-linked polymer networks in water pollution treatment has gradually attracted people's attention. This study introduces two new crosslinked hybrid network, PCS-OB and PCS-OP, which were created through one-step amine-ene reaction between octa(aminophenyl) silsesquioxane (OAPS) and bismaleimide or N, N'-1,3-phenylenedimaleimide. The synthesized hybrid networks were characterized using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area analysis, thermogravimetric analysis (TGA), and solid-state nuclear magnetic resonance (NMR) spectroscopy. The successful synthesis of the material is proved. PCS-OB and PCS-OP exhibited remarkable efficiency in the adsorption and removal of contaminants such as antibiotics, dyes, and iodine from wastewater. The maximum adsorbents for Rhodamine B (RhB), iodine vapor and berberine hydrochloride (BCH) were 1069 mg g-1, 1590 mg g-1 and 294 mg g-1, respectively. In conclusion, this work proves that PCS-OB and PCS-OP have broad application prospects in pollutant treatment.

Effect of structure on sensing performance of nitro explosives with high sensitivity and mechanism of two Tb(III) coordination polymers

The use of a conjugate N-containing ligand resulted in the decreasing of structural dimensions from 2D network of [Tb(2-pyia)(Ac)(H2O)] (CP1) to 1D chain [Tb(2-pyia)(Ac)(IDP)] (CP2) (2-H2pyia = 5-(pyridin-2-ylmethoxy) isophthalic acid and IDP=imidazo[4,5-f]-[1,10] phenanthroline). Both of them exhibit the characteristic luminescence of Tb ions and could have high fluorescence sensing properties for cefixime and fluridine. The different sensing properties for nitro explosives are manifested as CP1 for nitrobenzene and CP2 for 4-nitrophenol due to the difference in structure. Furthermore, CP2 exhibits the ratiometric fluorescence sensing for Fe3+ ion with a low detection limit of 0.405 μM. The fluorescence sensing mechanism of the two Tb complexes for different analytes was investigated using experimental methods and theoretical calculations. CP1 was used for the detection of Flu residues in the actual system and better results were obtained. The work shows the introduction of the chelated ligand might affect the structural and sensing performance changes of coordination polymers.

Ratiometric surface-enhanced Raman spectroscopy detection of 5-hydroxyindole-3-acetic acid based on Au@MIL-125@MIPs substrates

5-Hydroxyindole-3-acetic acid (5-HIAA) is a molecular marker that can be used in the early diagnosis of carcinoid tumors, and the development of sophisticated 5-HIAA assays is therefore of great importance. Surface-enhanced Raman spectroscopy (SERS) has been widely used for the rapid and sensitive detection of disease biomarkers. Insufficient specificity for tumor markers and poor spectral reproducibility are the bottlenecks in the practical use of SERS technology. In this study, based on MIL-125 surface-loaded gold nanoparticles (Au@MIL-125), a novel strategy was proposed to obtain Au@MIL-125@molecularly imprinted polymers (MIPs) as functional SERS substrates by wrapping a thin MIP shell around the Au@MIL-125 surface for selective separation followed by a 5-HIAA assay. The Raman peak intensity ratio (I865/I1078) was used to quantify 5-HIAA after a SERS spectral calibration with an embedded internal standard (i.e., 4-aminobenzenethiol) to improve the quantitative accuracy. The linear range was from 10-11 to 10-7 M, and the limit of detection (LOD) was 5.45 × 10-13 M. The method of integrating the MIPs with the metal MOF-based nanocomposites was shown to be useful in the analysis of real samples using SERS. The application of SERS for the selective and quantitative detection of analytes in real sample analysis, therefore, has great potential.

Metallic nanoparticles unveiled: Synthesis, characterization, and their environmental, medicinal, and agricultural applications

Metallic nanoparticles (MNPs) have attracted great interest among scientists and researchers for years due to their unique optical, physiochemical, biological, and magnetic properties. As a result, MNPs have been widely utilized across a variety of scientific fields, including biomedicine, agriculture, electronics, food, cosmetics, and the environment. In this regard, the current review article offers a comprehensive overview of recent studies on the synthesis of MNPs (metal and metal oxide nanoparticles), outlining the benefits and drawbacks of chemical, physical, and biological methods. However, the biological synthesis of MNPs is of great importance considering the biocompatibility and biological activity of certain MNPs. A variety of characterization techniques, including X-ray diffraction, transmission electron microscopy, UV-visible spectroscopy, scanning electron microscopy, dynamic light scattering, atomic force microscopy, Fourier transform infrared spectroscopy, and others, have been discussed in depth to gain deeper insights into the unique structural and spectroscopic properties of MNPs. Furthermore, their unique properties and applications in the fields of medicine, agriculture, and the environment are summarized and deeply discussed. Finally, the main challenges and limitations of MNPs synthesis and applications, as well as their future prospects have also been discussed.

Rapid assessment of acetophenone using an anti-interfering triple-emission Ln3+-functionalized HOF@MOF sensor

The development of high-performance sensors for rapidly detecting acetylacetone (AP) in water samples is necessary because its release into the environment can result in many vital problems for human health and environment. Herein, we first designed a hybrid by integrating HOF with ZIF-8 through a sequential growth strategy. By separately introducing blue-emitting SiQDs and green- and red-emitting Tb3+ and Eu3+ into ZIF-8 and HOF, the resultant ZIF-8@SiQDs@HOF@Eu3+@Tb3+ comprised three emission peaks at 484, 545 and 620 nm, all of which could be employed as switch-off responsive peaks to low concentrations of AP with a detection limit of 0.79 ppm. However, in environments with high concentrations of AP, a turn-on signal at 484 nm was observed. Thereupon, the ratiometric fluorescence intensity of the ternary emission varied within different concentration ranges, accompanied by the fluorescence color evolution from red to salmon to plum to purple to final blue. Moreover, a portable sensing film was fabricated for rapid warning, sensitive and visual determination of AP in complicated environments. Therefore, this triple-emission sensor with wide color variations and strong anti-interference advantages could promote further research to improve the selectivity, sensitivity and inherent self-correction of multimodal fluorescence detection and the ease of sensing operation.

Rapid redox-response featured visual ascorbic acid sensor based on simple-assembled europium metal-organic framework

A facile, fast and visible sensing platform for ascorbic acid (AA) detection has been developed based on self-assembled hydrangea-like europium metal-organic framework (HL-EuMOF). HL-EuMOF was synthesized through a simple one-step mixing process with Eu3+ and 1, 10-phenanthroline-2, 9-dicarboxylic acid at room temperature, which exhibited excellent properties including strong red fluorescence, long decay lifetime (548.623 μs) and good luminescent stability. Based on the specific redox reaction between Fe3+ and AA, the HL-EuMOF@Fe3+ was fabricated with "turn-off" response for AA, where the resulting Fe2+ displayed effective fluorescence quenching ability toward HL-EuMOF. The sensor demonstrated low detection limit (31.94 nM), rapid response time (30 s) and high selectivity. Integration of smartphone-assisted RGB analysis with HL-EuMOF@Fe3+ permitted convenient and visible quantitative determination of AA level. This approach also presented good detection performances in complex human serum and beverage samples, which could provide a valuable tool for AA detection in biomedical research and food industry.

An ultrasensitive paper-based SERS sensor for detection of nucleolin using silver-nanostars, plastic antibodies and natural antibodies

A state-of-the-art, ultrasensitive, paper-based SERS sensor has been developed using silver nanostars (AgNSs) in combination with synthetic and natural antibodies. A key component of this innovative sensor is the plastic antibody, which was synthesized using molecularly imprinted polymer (MIP) technology. This ground-breaking combination of paper substrates/MIPs with AgNSs, which is similar to a sandwich immunoassay, is used for the first time with the aim of SERS detection and specifically targets nucleolin (NCL), a cancer biomarker. The sensor device was carefully fabricated by synthesizing a polyacrylamide-based MIP on cellulose paper (Whatman Grade 1 filter) by photopolymerization. The binding of NCL to the MIP was then confirmed by natural antibody binding using a sandwich assay for quantitative SERS analysis. To facilitate the detection of NCL, antibodies were pre-bound to AgNSs with a Raman tag so that the SERS signal could indicate the presence of NCL. The composition of the sensory layers/materials was meticulously optimized. The intensity of the Raman signal at ∼1078 cm-1 showed a linear trend that correlated with increasing concentrations of NCL, ranging from 0.1 to 1000 nmol L-1, with a limit of detection down to 0.068 nmol L-1 in human serum. The selectivity of the sensor was confirmed by testing its analytical response in the presence of cystatin C and lysozyme. The paper-based SERS detection system for NCL is characterized by its simplicity, sustainability, high sensitivity and stability and thus embodies essential properties for point-of-care applications. This approach is promising for expansion to other biomarkers in various fields, depending on the availability of synthetic and natural antibodies.

A dual-channel sensing platform for the cross-interference-free detection of tetracycline and copper ion

Tetracycline (TC) and copper ion (Cu2+), as important additives in animal feed, play a crucial role in disease prevention and growth regulation. However, the abuse leads to concentration accumulation, which seriously threatens human health and the ecological environment. There is an urgent need to develop a detection method to achieve fast and synchronous detection of these pollutants without cross-interference. Here, a carbon dots-doped lanthanide-based fluorescent nanosensor (CDs@Tb-MOFs@SiO2-NH2-Eu) was synthesized, which can detect TC in the 380 nm channel by "antenna effect" and internal filtering effects (IFE), and identify Cu2+ in the 320 nm channel. The sensor was highly sensitive to TC within 0-4 μM with a detection limit as low as 3.64 nM, and Cu2+ could be detected within 0-40 μM with a detection limit of 38 nM. A portable dual-channel visual fluorescence sensor was obtained by loading the probes onto test paper and cotton swabs in food samples, which indicates the practicability of this sensing strategy.

Recent Advances in Developing Optical and Electrochemical Sensors for Monitoring Thiram and Future Perspectives

Thiram, as one widely used dithiocarbamate pesticide, has been considered seriously detrimental to food safety and human health because of poor efficiency, nonstandard/superfluous usage, and lack of a targeting effect. Developing high-performance sensors for thirams is strongly needed. With the rapid development of chemistry, biology, and materials science, many sensors have been constructed for thiram with high sensitivity and selectivity. Regarding the energy form of the signal, recognition mode, and detection principle, recent advances in the design and construction of optical and electrochemical sensors for thiram are summarized in this review, including colorimetric, luminescent, chemiluminescent, and electrochemical sensors. The advantages and disadvantages of the sensors for thiram including sensitivity, ability to avoid interference, recognition mechanism, signal output mode, and practicability are clarified in detail. Furthermore, the challenges faced, effective restrictions, and next direction of development are proposed for achieving more sensitive and selective analysis of thiram with less interference. We desire that this review will supply a solid theoretical basis and inspiration to generate innovative thinking for achieving new progress on thiram assays and the commercialization of the developed sensors in the future.

Novel hydrogel pillar array based ratiometric multicolor fluorescence biosensor for visual detection of alkaline phosphatase activity

Enzyme-induced in-situ fluorescence is crucial for the development of biosensing mechanisms and correlative spectroscopic analysis. Inspired by simple p-aminophenol (AP)-controlled synthesis and the specific catalytic reaction of 4-aminophenyl phosphate (APP) triggered by alkaline phosphatase (ALP), our research proposed a strategy to prepare carbon dots (CDs) as fluorescent signals for ALP detection using AP and 3-aminopropyltrimethoxysilane (APTMS) as the precursors. The further constructed ratiometric fluorescence sensor reduced the detection limit of ALP to 0.075 μU/mL by a significant margin. Considering the need for point-of-care testing (POCT), we chose agarose for the preparation of portable hydrogel sensors so that even untrained personnel can quickly achieve semi-quantitative visual detection of ALP using colorimetric cards. These results demonstrate the practical applicability of ratiometric fluorescence sensing hydrogel pillar arrays, which are important for high-sensitivity, visualization, and portable rapid enzyme activity assays.

A smartphone-combined ratiometric fluorescence molecularly imprinted probe based on biomass-derived carbon dots for determination of tyramine in fermented meat products

A ratiometric fluorescence molecularly imprinted probe employing two distinct emission wavelengths of biomass carbon dots was developed for highly selective and visual quantitative detection of tyramine in fermented meat products. The red emission biomass carbon dots were employed as responsive elements, and the blue ones were utilized as the reference elements. The molecularly imprinted polymers were incorporated in the ratiometric sensing to distinguish and adsorb tyramine. With the linear range of 1-60 μg/L, the ratiometric fluorescence molecularly imprinted probe was successfully applied to detect tyramine in real samples with the satisfactory recoveries of 79.74-112.12% and the detect limitation of 1.3 μg/kg, indicating that this probe has great potential applications for the detection of tyramine in real samples. Moreover, smartphone-based fluorescence signal recognition analysis on hand has been developed for the quantitative analysis of tyramine, providing a portable visual optical analysis terminal for rapid on-site determination of tyramine.

Stimuli-Responsive Molecularly Imprinted Polymers: Mechanism and Applications

Molecularly imprinted polymers (MIPs) are very suitable for extraction, drug delivery systems, and sensors due to their good selective adsorption ability, but the difficulty of eluting templates during synthesis and the limitation of application scenarios put higher demands on MIPs. Stimuli-responsive MIPs (SR-MIPs) can actively respond to changes in external conditions to realize various functions, which provides new ideas for the further development of MIPs. This paper reviews the multiple response modes of MIPs, including the common temperature, pH, photo, magnetic, redox-responsive and rare gas, biomolecule, ion, and solvent-responsive MIPs, and explains the mechanism, composition, and applications of such SR-MIPs. These SR-MIPs and the resulting dual/multiple-responsive MIPs have good selectivity, and controllability, and are very promising for isolation and extraction, targeted drug delivery, and electro-sensor.

Preparation and application of a pseudo-templated multi-monomer aflatoxins imprinted polymer

A functional material was developed with specific recognition properties for aflatoxins for pre-processing enrichment and separation in the detection of aflatoxins in Chinese herbal medicines. In the experiment, ethyl coumarin-3-carboxylate, which has a highly similar structure to the oxonaphthalene o-ketone of aflatoxin, was selected as a pseudo-template, zinc acrylate, neutral red derivative, and methacrylic acid, which have complementary functions, were selected as co-monomers to prepare a pseudo-template multifunctional monomer molecularly imprinted polymer (MIP). The MIP obtained under the optimal preparation conditions has a maximum adsorption capacity of 0.036 mg/mg and an imprinting factor of 3.67. The physical property evaluation of the polymers by Fourier infrared spectrometer, scanning electron microscopy, pore size analyzer, thermogravimetric analyzer, and diffuse reflectance spectroscopy showed that the MIP were successfully prepared and porous spherical-like particles were obtained. The synthesized polymer was used as a solid-phase extraction agent for the separation of aflatoxins from the extract of spina date seed. The linear range of the developed method was 10-1000 ng/mL, the limit of detection was 0.36 ng/mL, the limit of quantification was 1.19 ng/mL, and the recoveries of the extracts at the concentration level of 0.2 μg/mL were in the range 88.0-93.4%, with relative standard deviations (RSDs) of 1.97% (n). The results showed that the preparation of MIPs using ethyl coumarin-3-carboxylate as a template was simple, economical, and convenient. It is expected to become a promising functional material for the enrichment and separation aflatoxins from complex matrices.

Advances in Bioreceptor Layer Engineering in Nanomaterial-based Sensing of Pseudomonas Aeruginosa and its Metabolites

Pseudomonas aeruginosa is a pathogen that infects wounds and burns and causes severe infections in immunocompromised humans. The high virulence, the rise of antibiotic-resistant strains, and the easy transmissibility of P. aeruginosa necessitate its fast detection and control. The gold standard for detecting P. aeruginosa, the plate culture method, though reliable, takes several days to complete. Therefore, developing accurate, rapid, and easy-to-use diagnostic tools for P. aeruginosa is highly desirable. Nanomaterial-based biosensors are at the forefront of detecting P. aeruginosa and its secondary metabolites. This review summarises the biorecognition elements, biomarkers, immobilisation strategies, and current state-of-the-art biosensors for P. aeruginosa. The review highlights the underlying principles of bioreceptor layer engineering and the design of optical, electrochemical, mass-based, and thermal biosensors based on nanomaterials. The advantages and disadvantages of these biosensors and their future point-of-care applications are also discussed. This review outlines significant advancements in biosensors and sensors for detecting P. aeruginosa and its metabolites. Research efforts have identified biorecognition elements specific and selective towards P. aeruginosa. The stability, ease of preparation, cost-effectiveness, and integration of these biorecognition elements onto transducers are pivotal for their application in biosensors and sensors. At the same time, when developing sensors for clinically significant analytes such as P. aeruginosa, virulence factors need to be addressed, such as the sensor's sensitivity, reliability, and response time in samples obtained from patients. The point-of-care applicability of the developed sensor may be an added advantage since it enables onsite determination. In this context, optical methods developed for P. aeruginosa offer promising potential.

Bio(sensors) based on molecularly imprinted polymers and silica materials used for food safety and biomedical analysis: Recent trends and future prospects

In recent decades, analytical techniques have increasingly focused on the precise quantification. Achieving this goal has been accomplished with conventional analytical approaches that typically require extensive pretreatment methods, significant reagent usage, and expensive instruments. The need for rapid, simple, and highly selective identification platforms has become increasingly pronounced. Molecularly imprinted polymer (MIP) has emerged as a promising avenue for developing advanced sensors that can potentially surpass the limitations of conventional detection methods. In recent years, the application of MIP-silica materials-based sensors has garnered significant attention owing to their distinctive characteristics. These types of probes hold a distinct advantage in their remarkable stability and durability, all of which provide a suitable sensing platform in severe environments. Moreover, the substrate composed of silica materials offers a vast surface area for binding, thereby facilitating the efficient detection of even minuscule concentrations of targets. As a result, sensors based on MIP-silica materials have the potential to be widely applied in various industries, including medical diagnosis, and food safety. In the present review, we have conducted an in-depth analysis of the latest research developments in the field of MIPs-silica materials based sensors, with a focus on succinctly summarizing and elucidating the most crucial findings. This is the first comprehensive review of integration MIPs with silica materials in electrochemical (EC) and optical probes for biomedical analysis and food safety.

Aptamer-modified paper-based analytical devices for the detection of food hazards: Emerging applications and future perspective

Food analysis plays a critical role in assessing human health risks and monitoring food quality and safety. Currently, there is a pressing need for a reliable, portable, and quick recognition element for point-of-care testing (POCT) to better serve the demands of on-site food analysis. Aptamer-modified paper-based analytical devices (Apt-PADs) have excellent characteristics of high portability, high sensitivity, high specificity, and on-site detection, which have been widely used and concerned in the field of food safety. The article reviews the basic components and working principles of Apt-PADs, and introduces their representative applications detecting food hazards. Finally, the advantages, challenges, and future directions of Apt-PADs-based sensing performance are discussed, to provide new directions and insights for researchers to select appropriate Apt-PADs according to specific applications.

Fabrication of fluorescence probe based on molecularly imprinted polymers on red emissive biomass-derived carbon dots coupled with smartphone readout for tyramine determination in fermented meat products

A fluorescence probe based on molecularly imprinted polymers on red emissive biomass-derived carbon dots (r-BCDs@MIPs) was developed to detect tyramine in fermented meat products. The red emissive biomass-derived carbon dots (r-BCDs) were synthesized by the one-step solvothermal method using discarded passion fruit shells as raw materials. The fluorescence emission peak of r-BCDs was at 670 nm, and the relative quantum yield (QY) was about 2.44%. Molecularly imprinted sensing materials were prepared with r-BCDs as fluorescent centers for the detection of trace tyramine, which showed a good linear response in the concentration range of tyramine from 1 to 40 µg L-1. The linear correlation coefficient was 0.9837, and the limit of detection was 0.77 µg L-1. The method was successfully applied to the determination of tyramine in fermented meat products, and the recovery was 87.17-106.02%. The reliability of the results was verified through high-performance liquid chromatography (HPLC). Furthermore, we combined the r-BCDs@MIPs with smartphone-assisted signal readout to achieve real-time detection of tyramine in real samples. Considering its simplicity and convenience, the method could be used as a rapid and low-cost promising platform with broad application prospects for on-site detection of trace tyramine with smartphone-assisted signal readout.

Ratio-fluorescence detection of tert-butylhydroquinone based on non-conjugated polymer dots and gold nanoclusters

A novel ratiometric fluorescent probe based on non-conjugated polymer dots (NCPDs) and gold nanocluster (AuNCs) was constructed to determine tert-butylhydroquinone (TBHQ). The probe exhibited dual emission peaks at 480 nm and 630 nm under 370 nm excitation. The fluorescence of AuNCs was quenched by TBHQ due to strong electrostatic interactions, whereas the emission of NCPDs increased. The ratio of fluorescence intensity at 480 nm to 630 nm (F480 / F630) was monitored as analytical signal response. The probe have been utilized for the detection of TBHQ with good linear relationship in the range of 0.2 to 60 μg/mL. The limit of detection (LOD) and the limit of quantitation (LOQ) were 0.048 μg/mL and 0.159 μg/L, respectively. Three levels of spiked-in TBHQ concentrations were obtained with recovery rates from 80 % to 102 %. The present study provided an effective ratiometric fluorescence method for selective screening of TBHQ in food samples.

A competitive-type photoelectrochemical aptasensor for 17 beta-estradiol detection in microfluidic devices based on a novel Au@Cd:SnO2/SnS2 nanocomposite

A competitive-type photoelectrochemical (PEC) aptasensor coupled with a novel Au@Cd:SnO2/SnS2 nanocomposite was designed for the detection of 17β-estradiol (E2) in microfluidic devices. The designed Au@Cd:SnO2/SnS2 nanocomposites exhibit high photoelectrochemical activity owing to the good matching of cascade band-edge and the efficient separation of photo-generated e-/h+ pairs derived from the Cd-doped defects in the energy level. The Au@Cd:SnO2/SnS2 nanocomposites were loaded into carbon paste electrodes (CPEs) to immobilize complementary DNA (cDNA) and estradiol aptamer probe DNA (E2-Apt), forming a double-strand DNA structure on the CPE surface. As the target E2 interacts with the double-strand DNA, E2-Apt is sensitively released from the CPE, subsequently increasing the photocurrent intensity due to the reduced steric hindrance of the electrode surface. The competitive-type sensing mechanism, combined with high PEC activity of the Au@Cd:SnO2/SnS2 nanocomposites, contributed to the rapid and sensitive detection of E2 in a "signal on" manner. Under the optimized conditions, the PEC aptasensor exhibited a linear range from 1.0 × 10-13 mol L-1 to 3.2 × 10-6 mol L-1 and a detection limit of 1.2 × 10-14 mol L-1 (S/N = 3). Moreover, the integration of microfluidic device with smartphone controlled portable electrochemical workstation enables the on-site detection of E2. The small sample volume (10 µL) and short analysis time (40 min) demonstrated the great potential of this strategy for E2 detection in rat serum and river water. With these advantages, the PEC aptasensor can be utilized for point-of-care testing (POCT) in both clinical and environmental applications.

A two-dimensional iron-doped carbon-based nanoenzyme with catalase-like activity for the detection of alkaline phosphatase and ascorbate oxidase

Herein, we successfully synthesized two-dimensional iron-doped carbon-based nanosheets (Fe-N800 CS) with catalase-like activity through doping Fe into Zn MOF and introducing graphitic C3N4 (g-C3N4). The interaction of the Fe-N800 CS with hydrogen peroxide could generated abundant reactive oxygen species (ROS) and further oxidize o-Phenylenediamine (OPD) to 2,3-diaminophenazine (DAP) which has constant fluorescence at 560 nm. Ascorbic acid (AA) could be generated via the hydrolysis reaction between alkaline phosphatase (ALP) and ascorbic acid 2-phosphate (AAP). AA can be oxidized to dehy-droascorbic acid (DHA) by ROS, and then combined with OPD to generate 3-(1,2-dihydroxyethyl)furo[3,4b]-quinoxaline (QXD) with fluorescence at 440 nm, which could increase as the concentration of AA enhanced. DHA could also be generated through oxidation of AA by ascorbate oxidase (AAO). Thus, by monitoring the fluorescence ratio (I560/I440), a ratiometric fluorescence biosensing platform for ALP and AAO was established with the linear ranges in 0.2-10 U/L and 1-60 U/L, respectively. The limit of detection for ALP and AAO were 0.12 U/L and 0.59 U/L. Furthermore, the biosensing platform was successfully applied for the detection of ALP and AAO activity in human serum samples. This work provides a potential tool for future biomedical diagnostics.

A sensitive fluorometric-colorimetric dual-mode intelligent sensing platform for the detection of formaldehyde

Excess formaldehyde (FA) is a strong carcinogen, so the development of a rapid visualized and portable formaldehyde detection platform is of great research importance. A multi-color fluorescence sensing system constituted of model compound (NAHN) and red-emitting InP/ZnS QDs was constructed herein, which can simultaneously realize fluorometric-colorimetric dual-mode sensing when exposed to FA environment. Its preparation process was simplified, the detection process was green, and the limits of detection (LOD) were 0.623 μM and 0.791 μM, respectively. The high recoveries of FA in actual water samples indicated that the sensor had broad application prospects. The prepared fluorescent film can be utilized for rapid visual simulation analysis of FA on the surface of various fruits and vegetables. In addition, a serial logic gate was designed to quickly semi-quantitatively assess FA concentration, which promoted the realization of on-site intelligent evaluation of FA.

Molecular Imprinting-Based SERS Detection Strategy for the Large-Size Protein Quantitation and Curbing Non-Specific Recognition

Molecular imprinting-based surface-enhanced Raman scattering (MI-SERS) sensors have shown remarkable potential from an academic standpoint. However, their practical applications, especially in the detection of large-size protein (≥10 nm), face challenges due to the lack of versatile sensing strategies and nonspecific fouling of matrix species. Herein, we propose a Raman reporter inspector mechanism (RRIM) implemented on a protein-imprinted polydopamine (PDA) layer coated on the SERS active substrate. In the RRIM, after large-size protein recognition, the permeability of the PDA imprinted cavities undergoes changes that are scrutinized by Raman reporter molecules. Target proteins can specifically bind and fully occupy the imprinted cavities, whereas matrix species cannot. Then, Raman reporter molecules with suitable size are introduced to serve as both inspectors of the recognition status and inducers of the SERS signal, which can only penetrate through the vacant and nonspecifically filled cavities. Consequently, changes in the SERS signal exclusively originate from the specific binding of target proteins, while the nonspecific recognition of matrix species is curbed. The RRIM enables reproducible quantitation of the large-size cyanobacteria-specific protein model (≥10 nm), phycocyanin, at the level down to 2.6 × 10-3 μg L-1. Finally, the practical applicability of the RRIM is confirmed by accurately analyzing crude urban waterway samples over 21 min without any pretreatment.

Enzyme-free ratiometric fluorescence and colorimetric dual-signal determination of glyphosate based on copper nanoclusters (ZIF/CuNCs) combined with blue carbon dots (bCDs)

A novel ratio fluorescent and colorimetric dual-signal sensing platform for detecting glyphosate based on blue carbon dots (bCDs) combined with ZIF/CuNCs nanomaterials that encapsulate copper nanoclusters (CuNCs) in a metal-organic framework (MOF). In principle, the immobilization of Cu2+ in ZIF/CuNCs results in complexation with imidazole in ZIF, leading to fluorescence quenching of ZIF/CuNCs, while the reference fluorophore bCDs remains unaffected. In addition, the colorimetric sensing strategy was based on the efficient peroxidase-like activity of bCDs binding to Cu2+, catalyzing H2O2 to generate OH. Under this condition, TMB could be oxidized to form blue oxTMB. However, when glyphosate was involved in the system, the fluorescence of ZIF/CuNCs was restored upon due to the strong chelation between Cu2+ and glyphosate, while the peroxidase-like activity of bCDs/Cu2+ decreased and resulted in the generation of fewer oxTMB, accompanied by a lighter blue color. The sensing platform was successfully applied to the determination of glyphosate in real samples of lake water and cabbage, demonstrating reliable and sensitive performance in practical applications.

Gold nanoparticle-based selective and efficient spectrophotometric assay for the insecticide methamidophos

A reliable, rapid, and inexpensive nano-sized chemosensor is presented for methamidophos (MET) - an insecticide. Poly(lactic acid) (PLA)-stabilized gold nanoparticles (AuNPs) were synthesized by a simple one-pot, two-phase chemical reduction method. The synthesized PLA-AuNPs were subsequently employed for selective, efficient, and quantitative detection of MET. MET is one of the highly toxic pesticides used for eradication of agricultural and urban insects. Upon the addition of MET, the wine-red color of PLA-AuNPs swiftly transformed into greyish-blue, further corroborated by a significant bathochromic and hyperchromic shift in the SPR band. The presence of other interfering insecticides, metal salts, and drugs did not have any pronounced effect on quantitative MET detection. The detection limit, the quantification limit, and linear dynamic range of MET utilizing PLA-AuNPs were  0.0027 µM, 0.005 µM, and 0.005-1000 µM, respectively. The PLA-AuNP-based assay renders an efficient, rapid, accurate, and selective quantification of MET in food, biological, and environmental samples. The proposed sensor provides an appropriate platform for fast and on-the-spot determination of MET without requiring a well-equipped lab setup.

Emerging trends in sensors based on molecular imprinting technology: Harnessing smartphones for portable detection and recognition

Molecular imprinting technology (MIT) has become a promising recognition technology in various fields due to its specificity, high efficiency, stability and eco-friendliness in the recognition of target. Molecularly imprinted polymers (MIPs), known as 'artificial receptors', are shown similar properties to natural receptors as a biomimetic material. The selectivity of recognition for targets can be greatly improved when MIPs are introduced into sensors, as known that MIPs, are suitable for the pretreatment and analysis of trace substances in complex matrix samples. At present, various sensors has been developed by the combination with MIPs for detecting and identifying trace compounds, biological macromolecules or other substances, such as optical, electrochemical and piezoelectric sensors. Smart phones, with their built-in sensors and powerful digital imaging capabilities, provide a unique platform for the needs of portability and instant detection. MIP sensors based on smart phones are expected to become a new research direction in the future. This review discusses the latest applications of MIP sensors in the field of detection and recognition in recent years, summarizes the frontier progress of MIP sensor research based on smart phones in the past two years, and points out the challenges, limitations and future development prospects.

Hollow CoZnSe@CN nanocage with enzymatic activity for determination of tetracycline using smartphone platforms and virtual reality revealing

Antibiotic residues in the environment pose a serious threat to ecosystems and human health. Therefore, it is important to develop sensitive and rapid in situ detection methods. In this work, the designed nanozymes, with excellent four enzyme activities, were proved to be constituted of unique hollow nanocage structures (CoZnSe@CN HCs). Based on the peroxidase-like enzymes, a portable colorimetric sensor was constructed for the on-site determination of tetracycline (TC) in real samples. The linear range of TC detection was 0.1-100 μM, and the detection limit was 0.02 μM. At the same time, colorimetric detection and smartphones have also been combined for on-site colorimetric detection of TC. In-depth exploration of the detection mechanism showed that TC could be bound with the material, inhibiting the production of oxidized 3,3',5,5'-tetramethylbenzidine. The sensor was also used for the detection of TC in environmental soil and water samples. This study can provide an intelligent detection method for environmental monitoring.

Paper-based analytical device for sensitive colorimetric determination of sulfonamides in pharmaceutical samples

Sulfa drugs are frequently used to treat infections, particularly in antibiotic resistant people. There are several techniques available to determine sulfa drugs, however, they are laborious operation, reagent consumption, expensive, and need specialized types of equipment. Here, a new, very simple and inexpensive paper-based analytical device described for the determination of five sulfa drugs: sulfacetamide, sulfadiazine, sulfamerazine, sulfamethoxazole, and sulfathiazole in pharmaceutical preparations. The method is a one-step reaction, based on the colorimetric reaction between acid-hydrolyzed sulfa drugs and 4-dimethylaminobenzaldehyde. Using a smartphone, the RGB value of color intensity was used as an analytical signal. The paper-based device displayed linear ranges of 0.10-5.00 µg mL-1, linear correlations ranging from 0.9903 to 0.9972, limits of detection 0.0030 to 0.0082 µg mL-1, and RSD of ≤0.258 under optimal conditions. The suggested approach was applied for determining five sulfa drugs in pharmaceutical formulations. This approach is appropriate for pharmaceutical applications since it is inexpensive, simple to utilize, sensitive, and selective.

A symmetric bis(salamo)-like fluorescent chemosensor for identifying HCO3- and CO32- and its application

In this work, we successfully designed and synthesized a methoxydisubstituted bis(salamo)-type fluorescent chemical sensor BS, which can be applied as a highly sensitive and selective fluorescence probe for HCO3- and CO32- detection. The LODs of HCO3- and CO32- were experimentally calculated to be 5.4068 × 10-8 M and 4.4517 × 10-8 M, respectively. After relevant experiments, the sensing mechanism was investigated. Moreover, the application of the sensor in practice is explored, and the sensor BS can be loaded on portable test strips for ion detection. In the field of ion detection, salamo-like chemical sensors have been less studied compared to other sensor molecules, especially for the recognition and detection of anions. Therefore, this study will to some extent contribute to expanding the application of salamo-like compounds.

A ratiometric fluorescence sensor based on the inner filtration effect of gold nanoparticles on quantum dots for monitoring dopamine

In this study, a smart phone assisted ratiometric fluorescence sensor was designed for detecting dopamine (DA). The ratiometric fluorescence sensor was prepared by simple physical mixing green quantum dots (GQDS) and red quantum dots (RQDS). DA could induce gold nanoparticles (AuNPs) aggregate via hydrogen-bonding interactions, and further changed the absorption spectrum of gold nanoparticles to overlap with a certain emission spectrum of ratiometric fluorescence sensor. AuNPs had inner filtration effect (IFE) on the ratiometric fluorescence sensor. Due to the IFE, the dispersive AuNPs could quench GQDS, whereas the clustered AuNPs could quench RQDS. With the addition of DA, the color of ratiometric fluorescence changed from orange red to green. To simplify the detection process, a smartphone was employed to detecting DA in human urine by measuring RGB value of fluorescence color changes with a detection limit of 86 nM. This proposed method has the advantages of low cost, easy prevalence and simple operation, thus provides a great promise for rapid detection of biomarker in biological samples.

Assessing the greenification potential of cyclodextrin-based molecularly imprinted polymers for pesticides detection

Cyclodextrins, with their unparalleled attributes of eco-friendliness, natural abundance, versatile utility, and facile functionalization, make a paramount contribution to the field of molecular imprinting. Leveraging the unique properties of cyclodextrins in molecularly imprinted polymers synthesis has revolutionized the performance of molecularly imprinted polymers, resulting in enhanced adsorption selectivity, capacity, and rapid extraction of pesticides, while also circumventing conventional limitations. As the concern for food quality and safety continues to grow, the need for standard analytical methods to detect pesticides in food and environmental samples has become paramount. Cyclodextrins, being non-toxic and biodegradable, present an attractive option for greener reagents in imprinting polymers that can also ensure environmental safety post-application. This review provides a comprehensive summary of the significance of cyclodextrins in molecular imprinting for pesticide detection in food and environmental samples. The recent advancements in the synthesis and application of molecularly imprinted polymers using cyclodextrins have been critically analyzed. Furthermore, the current limitations have been meticulously examined, and potential opportunities for greenification with cyclodextrin applications in this field have been discussed. By harnessing the advantages of cyclodextrins in molecular imprinting, it is possible to develop highly selective and efficient methods for detecting pesticides in food and environmental samples while also addressing the challenges of sustainability and environmental impact.

Preparation of lysozyme-imprinted mesoporous Zr-based metal-organic frameworks with remarkable specific recognition

The development of high-performance protein-imprinted materials remains challenging due to defects concerning high mass transfer resistance and non-specific binding, which are crucial for protein purification and enrichment. In this paper, lysozyme-imprinted mesoporous Zr-based MOF (mesoUiO-66-NH2@MIPs) with specific and selective recognition of lysozyme (Lyz) were prepared by surface imprinting technology. In particular, the excellent hydrophilicity mesoporous MOFs (mesoUiO-66-NH2) with a pore size of 10 nm was prepared as a carrier for Lyz immobilization by an auxiliary modulation strategy to regulate the microporous structure of UiO-66-NH2 with the propionic acid solution, enabling massive loading of the macromolecular protein Lyz. The mesoUiO-66-NH2@MIPs reached a maximum saturation adsorption of 206.54 mg g-1 on Lyz in 20 min at 25 °C with an imprinting factor of 2.57 and selection factors of 2.02, 2.34, and 2.45 for cytochrome c (Cyt c), bovine serum albumin (BSA) and bovine hemoglobin (BHb), respectively. More importantly, the mesoUiO-66-NH2@MIPs could specifically recognize Lyz from the mixed protein system. The adsorption capacity of Lyz could still reach 78.55% after 5 cycles with good cyclic regeneration performance. This provides a new research option for developing and applying novel porous MOF in biomolecule imprinting technology and the specific separation of biomolecules.

Development of a Screening Method for Fluoroquinolones in Meat Samples Using Molecularly Imprinted Carbon Dots

An accurate and simple screening method has been developed for the determination of fluoroquinolone antibiotics. Carbon dots were synthesized by simple hydrothermal treatment as highly fluorescent nano-sensors. They were subsequently used in the synthesis of organic-based molecularly imprinted polymers to develop fluorescence-based polymeric composites using enoxacin as a representative dummy template molecule of fluoroquinolones. The method was optimized concerning the pH of the medium and composite concentration. The normalized fluorescence intensity showed efficient quenching under optimized conditions upon successive addition of the template, with an excellent correlation coefficient. The proposed method was applied to eight other fluoroquinolones, exhibiting, in all cases, good correlation coefficients (0.65-0.992) within the same linearity range (0.03-2.60 mg mL-1). Excellent detection and quantification limits were been obtained for the target analytes down to 0.062 and 0.186 mg L-1, respectively. All studied analytes showed no interference with enrofloxacin, the most commonly used veterinary fluoroquinolone, with a percentage of cross-reactivity varying from 89.00 to 540.00%. This method was applied successfully for the determination of enrofloxacin in three different types of meat samples: beef, pork, and chicken, with good recoveries varying from 70 to 100% at three levels. This new procedure is an easy analytical method that can be useful as a screening method for monitoring the environmental hazard of fluoroquinolones in quality control laboratories.

A white-light-emitting sensor array based on cucurbit[8]uril for quantitative detection of multicomponent nitroaniline isomers

A white-light-emitting supramolecular complex through supramolecular interactions has been assembled; the white luminescent supramolecular complex exhibits two emission spectra. Based on this, a dual-channel white-light array sensor was constructed. The results show that it can quickly identify and detect nitroaniline isomer pollutants (p-nitroaniline, m-nitroaniline, o-nitroaniline). When these three nitroaniline isomers were added to the supramolecular white-light array sensor, the fluorescence intensity of the white-light complex decreased to varying degrees. Linear discriminant analysis (LDA) showed that the supramolecular white-light array sensor could recognize and distinguish three nitroaniline isomers and could classify mixtures containing different concentrations. Factor 1 of the array had a good linear relationship with the concentration of pollutants, and the detection limit (LOD) was as low as 0.7 μM. The method has good reproducibility and stability. In addition, it can also qualitatively detect the nitroaniline isomers in river water and contaminated rice seedling extract. It provides an ideal platform for constructing multiresponse sensors.

A cellulose-based intelligent temperature-sensitive molecularly imprinted aerogel reactor for specific recognition and enrichment of ursolic acid

In this article, thermosensitive molecularly imprinted polymer and composite aerogel were combined for the first time to create an intelligent temperature-responsive aerogel reactor to effectively enrich ursolic acid (UA). Because aerogel carrier had a higher specific surface area and higher porosity compared to other carriers, the ursolic acid molecularly imprinted intelligent temperature responsive aerogel reactor (ITR&AR(G570)&UA-MIP) demonstrated a higher adsorption capacity for UA. More notably, ITR&AR(G570)&UA-MIP have the extraordinary capacity to spontaneously adsorb-desorb target molecule UA by regulating the reaction temperature. The ratio of the target molecule UA to the functional monomer and crosslinker in the grafting process and external influences had a major impact on how ITR&AR(G570)&UA-MIP were prepared overall. When the molar ratio of UA to 4-VP was 1:8, the weight ratio between ITR&AR(G570)&UA-MIP and EGDMA/DVB was 1:2:10, the reaction temperature was 60 °C, and the ambient pH = 6, the material showed the best adsorption capacity, reaching a peak of about 70 mg g-1. After researching the appropriate synthesis conditions, ITR&AR(G570)&UA-MIP were applied to lingonberry (Vaccinium Vitis-Idaea L.) berry extracts in this work. The outcomes show that this technique provides a new, intelligent, temperature-controlled adsorption material for the solid-phase extraction of triterpenoid acids in natural products, with good specific adsorption performance for the target molecule UA.

Health Monitoring System from Pyralux Copper-Clad Laminate Film and Random Forest Algorithm

Sensor technologies have been core features for various wearable electronic products for decades. Their functions are expected to continue to play an essential role in future generations of wearable products. For example, trends in industrial, military, and security applications include smartwatches used for monitoring medical indicators, hearing devices with integrated sensor options, and electronic skins. However, many studies have focused on a specific area of the system, such as manufacturing processes, data analysis, or actual testing. This has led to challenges regarding the reliability, accuracy, or connectivity of components in the same wearable system. There is an urgent need for studies that consider the whole system to maximize the efficiency of soft sensors. This study proposes a method to fabricate a resistive pressure sensor with high sensitivity, resilience, and good strain tolerance for recognizing human motion or body signals. Herein, the sensor electrodes are shaped on a thin Pyralux film. A layer of microfiber polyesters, coated with carbon nanotubes, is used as the bearing and pressure sensing layer. Our sensor shows superior capabilities in respiratory monitoring. More specifically, the sensor can work in high-humidity environments, even when immersed in water-this is always a big challenge for conventional sensors. In addition, the embedded random forest model, built for the application to recognize restoration signals with high accuracy (up to 92%), helps to provide a better overview when placing flexible sensors in a practical system.

Hollow porphyrin-based porous organic polymer with dual enzyme-like activities for ultra-fast colorimetric detection of Cr (VI) in wastewater

A hollow porphyrin-based porous organic polymer (H-Fe-POP) was prepared for rapid and sensitive colorimetric determination of Cr(VI), which exhibited excellent dual enzyme-like activities, including oxidase-like and peroxidase-like activities. Due to the specific binding of 8-hydroxyquinoline (8-HQ) to Cr(VI), 3,3',5,5'-tetramethylbenzidine (TMB) was liberated, and TMB was oxidized to blue ox-TMB catalyzed by H-Fe-POP. Based on the excellent oxidase-like activity of H-Fe-POP, an ultra-fast colorimetric platform for the detection of Cr(VI) was constructed, allowing the quantification of Cr(VI) in the range 2-130 μM within 30 s with a detection limit of 0.23 μM. Importantly, the sensor can accurately determine Cr(VI) in industrial wastewater, indicating its high potential for environmental monitoring.

Fluorescent detection of tartrazine based on the supramolecular self-assembly of cationic perylene diimide

A cationic perylene probe was designed and synthesized for sensitive determination of tartrazine. In the presence of tartrazine, the fluorescence of the perylene probe was quenched by efficient supramolecular self-assembly of the perylene derivate. The quenching is caused by the synergistic effect of noncovalent interactions including static electricity, π-π stacking, and hydrophobic interaction. Benefiting from these advantages, the probe exhibited excellent sensing performance to tartrazine within 2 min. The detection and quantification limit of tartrazine are as low as 2.42 and 8.07 nmol L-1, respectively, with a wide linear operation range from 15 to 500 nmol L-1. Most importantly, due to the high binding affinity (3.22 × 107 mol L-1) between the perylene probe and tartrazine, the sensing system shows great anti-interference capacity. Subsequently, the visualization application of the approach was evaluated by portable device, and the limits of detection for visual detection for test strip, membrane, and hydrogel were 0.5, 0.5, and 5 μmol L-1, respectively. The approach has been applied to monitor tartrazine in various food condiments with recoveries in the range 91.29-108.83%. As far as we know, this is the first report of using perylene-based probe for tartrazine determination, offering a promising strategy for the construction of perylene-based detection system in the field of food safety.

Linking peptide-oriented surface imprinting magnetic nanoparticle with carbon nanotube-based fluorescence signal output device for ultrasensitive detection of glycoprotein

Determination of trace glycoprotein has important guiding significance in clinical diagnosis and is usually achieved by immunoaffinity. However, immunoaffinity possesses inherent drawbacks, such as poor probability of high-quality antibodies, instability of biological reagents, and harmfulness of chemical labels to the body. Herein, we propose an innovative method of peptide-oriented surface imprinting to fabricate artificial antibody for recognition of glycoprotein. By integrating peptide-oriented surface imprinting and PEGylation, an innovative hydrophilic peptide-oriented surface imprinting magnetic nanoparticle (HPIMN) was successfully fabricated with human epidermal growth factor receptor-2 (HER2) as a model glycoprotein template. In addition, we further prepared a novel boronic acid-modified/fluorescein isothiocyanate-loaded/polyethylene glycol-covered carbon nanotube (BFPCN) as fluorescence signal output device, which was loaded with numerous fluorescent molecules could specifically label the cis-diol of glycoprotein at physiological pH via boronate-affinity interaction. To prove the practicability, we proposed a HPIMN-BFPCN strategy, in which the HPIMN first selectively captured the HER2 due to the molecular imprinted recognition and then the BFPCN specific labeled the exposed cis-diol of HER2 based on the boronate-affinity reaction. The HPIMN-BFPCN strategy exhibited ultrahigh sensitivity with limit of detection of 14 fg mL^-1 and was successfully used in the determination of HER2 in spiked sample with recovery and relative standard deviation in the range of 99.0%-103.0% and 3.1%-5.6%, respectively. Therefore, we believe that the novel peptide-oriented surface imprinting has great potential to become an universal strategy for fabrication of recognition units for other protein biomarkers, and the synergy sandwich assay could become a powerful tool in prognosis evaluation and clinical diagnosis of glycoprotein-related diseases.

Mn3O4 nanoparticles decorated porous reduced graphene oxide with excellent oxidase-like activity for fast colorimetric detection of ascorbic acid

Mn₃O₄ nanoparticles composed of porous reduced graphene oxide nanosheets (Mn₃O₄@p-rGO) with enhanced oxidase-like activity were successfully fabricated through an in-situ approach for fast colorimetric detection of ascorbic acid (AA). The residual Mn²⁺ in the GO suspension of Hummers method was directly reused as the manganese source, improving the atom utilization efficiency. Benefiting from the uniform distribution of Mn₃O₄ nanoparticles on the surface of p-rGO nanosheets, the nanocomposite exhibited larger surface area, more active sites, and accelerated electron transfer efficiency, which enhanced the oxidase-like activity. Mn₃O₄@p-rGO nanocomposite efficiently activate dissolved O₂ to generate singlet oxygen (¹O₂), leading to high oxidation capacity toward the substrate 3,3',5,5'-tetramethylbenzidine (TMB) without the extra addition of H₂O₂. Furthermore, the prominent absorption peak of the blue ox-TMB at 652 nm gradually decreased in the presence of AA, and a facile and fast colorimetric sensor was constructed with a good linear relationship (0.5-80 μM) and low LOD (0.278 μM) toward AA. Owing to the simplicity and excellent stability of the sensing platform, its practical application for AA detection in juices has shown good feasibility and reliability compared with HPLC and the 2, 4-dinitrophenylhydrazine colorimetric method. The oxidase-like Mn₃O₄@p-rGO provides a versatile platform for applications in food testing and disease diagnosis.

An autofocusing method for dynamic surface-enhanced Raman spectroscopy detection realized by optimized hill-climbing algorithm with long time stable hotspots

In the manual dynamic surface-enhanced Raman spectroscopy (D-SERS) detection process, it is difficult to focus on sample drop due to the constantly changing hotspot and easy judgment method. In this paper, we proposed an automatic focusing method based on long time stable hotspot with aid of optimization of hill-climbing algorithm and achieved on a designed device. First, set up a high temperature accelerating evaporation process to obtain hotspot and then cool to a low temperature rapidly to maintain it. Then, the spectral intensity was used as a focus of feedback signal in optimized hill-climbing algorithm to drive the sample stage to move up and down to adjust the depth of the laser on the samples to realize automatic focusing. As a result, the hotspot can be maintained for 5 min, and the autofocusing result can be achieved within 9 s, while the sensitivity was improved with two orders of magnitude in D-SERS detection of crystal violet (CV) compared with manual focusing.

Determination of lead in Gentiana rigescens and evaluation of the effect of lead exposure on the liver protection of the natural medicine

In this work, ultrasound-assisted rapidly synergistic cloud point extraction (UARS-CPE) and inductively coupled plasma optical emission spectrometry (ICP-OES) were combined to determine trace Pb in Gentiana rigescens Franch. ex Hemsl. (G. rigescens) samples. Under the optimal conditions, the enhancement factor (EF), limit of detection (LOD), limit of quantitation (LOQ) and precision were 33, 0.11 μg L^-1, 0.37 μg L^-1 and 1.3%, respectively. This method was applied to the analysis of G. rigescens samples, and the outcomes were in good agreement with the results determined by inductively coupled plasma mass spectrometry (ICP-MS). A mice model of immune liver injury induced by concanavalin A (ConA) was established, and the liver protection of G. rigescens and gentiopicroside (GPS) on it and the effects of various dosages of Pb exposure on its liver protection were studied. Pb at a dosage of 5 mg kg^-1 had little effect on the liver protection of G. rigescens and GPS, while 25, 125 mg kg^-1 dosages of Pb could significantly attenuate the liver protection of both. In addition, it aggravated the necrosis of hepatocytes and inflammatory cell infiltration, and these effects were dose-dependent.

Carbon nanomaterial-based molecularly imprinted polymer sensors for detection of hazardous substances in food: recent progress and future trends

The presence of various harmful substances in food is significantly risky to human health. Therefore, simple, rapid, and selective food hazard analysis tools have become a focus of sensing research. At present, molecularly imprinted polymers (MIPs) have attracted more and more attention because of their easy preparation and high selectivity. Due to their simple preparation, low cost, large specific surface area, and high conductivity, carbon nanomaterial can be used as sensing substrate carriers. Therefore, the combination of carbon nanomaterial with MIPs has attracted great attention. This paper summarizes the development, composition, and preparation methods of MIPs, as well as the latest research progress in carbon nanomaterials for the detection of various food hazards using sensors. In addition, the practical applications of carbon nanomaterial-based MIP sensors, their current challenges and future trends, and the ongoing efforts devoted to developing new and efficient carbon nanomaterial-based MIP sensing platforms are also introduced.

Dummy-template Pickering emulsion imprinted microspheres online pretreatment and analysis for the estrogens in cosmetics

Estrogens are a class of steroid hormone with strong physiological activity. Due to the pronounced beauty effect, such drugs are highly susceptible to illegal addition and cause other adverse effects. To avoid template leakage and the negative impacts on the environment caused by the estrogens, diosgenin was selected as the dummy template due to its similar skeleton structure. The Pickering emulsion polymerization was used to obtain the dummy-template molecularly imprinted polymers (dt-MIPs). Scanning electron microscopy, optical microscopy, specific surface area testing, Fourier transform infrared spectroscopy and adsorption experiments were used to characterize the apparent morphology and the recognition performance of the microspheres. Then, the prepared microspheres and commercial fillers were used to construct an on-line solid phase extraction (on-line SPE) analytical system coupled with HPLC via a two-position switching valve. On-line solid phase extraction-HPLC analytical methods were established and verified, for the simultaneous determination of four estrogens in cosmetic samples. The accuracy and precision RSDs for the established methods using the imprinted sorbents were 92.00-104.02% and less than 9.12%, respectively. All four estrogens exhibited good linearity in the range of 0.05 to 5 µg/mL with a coefficient of determination R² greater than 0.9810. The method comparison results suggest that the established analytical method is simple in pre-treatment, easy to automate, and has excellent sensitivity to meet the analytical requirements of complex samples.