Plasmon-Driven Photocatalysis Leads to Products Known from E-beam and X-ray-Induced Surface Chemistry

Plasmon-enhanced fluorescence combined with aptamer sensor based on Ag nanocubes for signal-amplified detection of berberine hydrochloride

Plasmon enhanced fluorescent (PEF) with more "hot spots" play a critical role in signal amplified technology to avoid the intrinsic limitation of fluorophore which ascribed to a strong electromagnetic field at the tip structure. However, application of PEF technique to obtain a highly sensitive analysis of medicine was still at a very early stage. Herein, a simple but versatile Ag nanocubes (Agcubes)-based PEF sensor combined with aptamer (Agcubes@SiO2-QDs-Apt) was proposed for highly sensitive detection of berberine hydrochloride (BH). The distance between the plasma Agcubes and the red-emitted CdTe quantum dots (QDs) were regulated by the thickness of silica spacer. The three-dimensional finite-difference time-domain (3D-FDTD) simulation further revealed that Agcubes have a higher electromagnetic field than Ag nanospheres. Compared with PEF sensor, signal QDs-modified aptamer without Agcubes (QDs-Apt) showed a 10-fold higher detection limit. The linear range and detection limit of the Agcubes@SiO2-QDs-Apt were 0.1-100 μM, 87.3 nM, respectively. Furthermore, the PEF sensor was applied to analysis BH in the berberine hydrochloride tablets, compound berberine tablet and urine with good recoveries of 98.25-102.05%. These results demonstrated that the prepared PEF sensor has great potential for drug quality control and clinical analysis.

Classical vs. quantum plasmon-induced molecular transformations at metallic nanojunctions

Chemical transformations near plasmonic metals have attracted increasing attention in the past few years. Specifically, reactions occurring within plasmonic nanojunctions that can be detected via surface and tip-enhanced Raman (SER and TER) scattering were the focus of numerous reports. In this context, even though the transition between localized and nonlocal (quantum) plasmons at nanojunctions is documented, its implications on plasmonic chemistry remain poorly understood. We explore the latter through AFM-TER-current measurements. We use two molecules: i) 4-mercaptobenzonitrile (MBN) that reports on the (non)local fields and ii) 4-nitrothiophenol (NTP) that features defined signatures of its neutral/anionic forms and dimer product, 4,4'-dimercaptoazobenzene (DMAB). The transition from classical to quantum plasmons is established through our optical measurements: It is marked by molecular charging and optical rectification. Simultaneously recorded force and current measurements support our assignments. In the case of NTP, we observe the parent and DMAB product beneath the probe in the classical regime. Further reducing the gap leads to the collapse of DMAB to form NTP anions. The process is reversible: Anions subsequently recombine into DMAB. Our results have significant implications for AFM-based TER measurements and their analysis, beyond the scope of this work. In effect, when precise control over the junction is not possible (e.g., in SER and ambient TER), both classical and quantum plasmons need to be considered in the analysis of plasmonic reactions.

Experimental and Theoretical Investigations of the Fragmentation of Ethylenediamine Induced by Low-Energy (<10 eV) Electrons

Ethylenediamine is industrially used as an intermediate for the fabrication of many products. The development of new methodologies for synthesis compatible with the environment and sustainability, such as cold plasma processes, implicates reactions induced by nonthermal electrons. In this contribution, we study the interaction of low-energy (<10 eV) electrons with ethylenediamine. We show that electrons induce the fragmentation of the molecule into various anion fragments and associated neutral counterparts via dissociative electron attachment. The fragmentation mechanisms and energetics are discussed in the frame of DFT calculations. The fragmentation processes are quantified by the estimation of the cross sections and the branching ratios for competitive accessible dissociation routes.

Accessible hotspots for single-protein SERS in DNA-origami assembled gold nanorod dimers with tip-to-tip alignment

The label-free identification of individual proteins from liquid samples by surface-enhanced Raman scattering (SERS) spectroscopy is a highly desirable goal in biomedical diagnostics. However, the small Raman scattering cross-section of most (bio-)molecules requires a means to strongly amplify their Raman signal for successful measurement, especially for single molecules. This amplification can be achieved in a plasmonic hotspot that forms between two adjacent gold nanospheres. However, the small (≈1-2 nm) gaps typically required for single-molecule measurements are not accessible for most proteins. A useful strategy would thus involve dimer structures with gaps large enough to accommodate single proteins, whilst providing sufficient field enhancement for single-molecule SERS. Here, we report on using a DNA origami scaffold for tip-to-tip alignment of gold nanorods with an average gap size of 8 nm. The gaps are accessible to streptavidin and thrombin, which are captured at the plasmonic hotspot by specific anchoring sites on the origami template. The field enhancement achieved for the nanorod dimers is sufficient for single-protein SERS spectroscopy with sub-second integration times. This design for SERS probes composed of DNA origami with accessible hotspots promotes future use for single-molecule biodiagnostics in the near-infrared range.

Optoplasmonic Effects in Highly Curved Surfaces for Catalysis, Photothermal Heating, and SERS

Surface curvature can be used to focus light and alter optical processes. Here, we show that curved surfaces (spheres, cylinders, and cones) with a radius of around 5 μm lead to maximal optoplasmonic properties including surface-enhanced Raman scattering (SERS), photocatalysis, and photothermal processes. Glass microspheres, microfibers, pulled fibers, and control flat substrates were functionalized with well-dispersed and dense arrays of 45 nm Au NP using polystyrene-block-poly-4-vinylpyridine (PS-b-P4VP) and chemically modified with 4-mercaptobenzoic acid (4-MBA, SERS reporter), 4-nitrobenzenethiol (4-NBT, reactive to plasmonic catalysis), or 4-fluorophenyl isocyanide (FPIC, photothermal reporter). The various curved substrates enhanced the plasmonic properties by focusing the light in a photonic nanojet and providing a directional antenna to increase the collection efficacy of SERS photons. The optoplasmonic effects led to an increase of up to 1 order of magnitude of the SERS response, up to 5 times the photocatalytic conversion of 4-NBT to 4,4'-dimercaptoazobenzene when the diameter of the curved surfaces was about 5 μm and a small increase in photothermal effects. Taken together, the results provide evidence that curvature enhances plasmonic properties and that its effect is maximal for spherical objects around a few micrometers in diameter, in agreement with a theoretical framework based on geometrical optics. These enhanced plasmonic effects and the stationary-phase-like plasmonic substrates pave the way to the next generation of sensors, plasmonic photocatalysts, and photothermal devices.

Plasmon-Determined Selectivity in Photocatalytic Transformations on Gold and Gold-Palladium Nanostructures

Noble metal nanostructures absorb light producing coherent oscillations of the metal's electrons, so-called localized surface plasmon resonances (LSPRs). LSPRs can decay generating hot carriers, highly energetic species that trigger chemical transformations in the molecules located on the metal surfaces. The number of chemical reactions can be expanded by coupling noble and catalytically active metals. However, it remains unclear whether such mono- and bimetallic nanostructures possess any sensitivity toward one or another chemical reaction if both of them can take place in one molecular analyte. In this study, we utilize tip-enhanced Raman spectroscopy (TERS), an emerging analytical technique that has single-molecule sensitivity and sub-nanometer spatial resolution, to investigate plasmon-driven reactivity of 2-nitro-5-thiolobenzoic acid (2-N-5TBA) on gold and gold@palladium nanoplates (AuNPs and Au@PdNPs). This molecular analyte possesses both nitro and carboxyl groups, which can be reduced or removed by hot carriers. We found that on AuNPs, 2-N-5TBA dimerized forming 4,4'-dimethylazobenzene (DMAB), the bicarbonyl derivative of DMAB, as well as 4-nitrobenzenethiol (4-NBT). Our accompanying theoretical investigation based on density functional theory (DFT) and time-dependent density functional theory (TDDFT) confirmed these findings. The theoretical analysis shows that 2-N-5TBA first dimerized forming the bicarbonyl derivative of DMAB, which then decarboxylated forming DMAB. Finally, DMAB can be further reduced leading to 4-NBT. This reaction mechanism is supported by TERS-determined yields on these three molecules on AuNPs. We also found that on Au@PdNPs, 2-N-5TBA first formed the bicarbonyl derivative of DMAB, which is then reduced to both bihydroxyl-DMAB and 4-amino-3-mercaptobenzoic acid. The yield of these reaction products on Au@PdNPs strictly follows the free-energy potential of these molecules on the metallic surfaces.

Tip-enhanced Raman imaging of plasmon-driven dimerization of 4-bromothiophenol on nickel-decorated gold nanoplate bimetallic nanostructures

We used tip-enhanced Raman spectroscopy (TERS) to examine plasmon-driven dimerization of 4-bromothiophenol (4-BTP) into thiophenol (TP) and 4,4'-biphenyldithiol (4,4'-BPDT) on Au and Ni@AuNPs. TERS revealed that cross-coupling of these molecular reactants into 4,4'-BPDT occurred primarily on Ni nano islands rather than the surrounding Au on the surface of Ni@AuNPs.

Optimally Configured Optical Fiber Near-Field Enhanced Plasmonic Resonance Immunoprobe for the Detection of Alpha-Fetoprotein

The detection of trace biomarkers is an important supplementary approach for early screening and diagnoses of tumors. An optical fiber near-field enhanced plasmonic resonance immunoprobe is developed for the detection of the hepatocellular carcinoma biomarker, i.e., the alpha-fetoprotein. Generic principles based on dispersion models and finite element analysis (FEA) models are developed to realize the optimized configuration of spectral characteristics of the immunoprobe. Dispersion models provide theoretical guidance for the design of the multilayer sensing structure from the perspective of the ray optics theory. FEA models provide theoretical guidance for the selection of coating materials from the perspective of the self-defined dielectric constant ratio, i.e., the ratio of the real part to the imaginary part. The optimized configuration of the antibody coupling further improves the biosensing performance of the immunoprobe. The limit of detection (LOD) can reach down to 0.01 ng mL^-1 , which is one order of magnitude lower than those relevant reported works. Such a low LOD can more effectively avoid the accuracy degradation of detection results due to measurement errors. Human serum samples have also been detected, with the good precision achieved. This work shows promising prospects in applications of label-free, low-cost, rapid, and convenient early screening of tumors.

Learning and Predicting Photonic Responses of Plasmonic Nanoparticle Assemblies via Dual Variational Autoencoders

The application of machine learning is demonstrated for rapid and accurate extraction of plasmonic particles cluster geometries from hyperspectral image data via a dual variational autoencoder (dual-VAE). In this approach, the information is shared between the latent spaces of two VAEs acting on the particle shape data and spectral data, respectively, but enforcing a common encoding on the shape-spectra pairs. It is shown that this approach can establish the relationship between the geometric characteristics of nanoparticles and their far-field photonic responses, demonstrating that hyperspectral darkfield microscopy can be used to accurately predict the geometry (number of particles, arrangement) of a multiparticle assemblies below the diffraction limit in an automated fashion with high fidelity (for monomers (0.96), dimers (0.86), and trimers (0.58). This approach of building structure-property relationships via shared encoding is universal and should have applications to a broader range of materials science and physics problems in imaging of both molecular and nanomaterial systems.

Toward a New Era of SERS and TERS at the Nanometer Scale: From Fundamentals to Innovative Applications

Surface-enhanced Raman scattering (SERS) and tip-enhanced Raman scattering (TERS) have opened a variety of exciting research fields. However, although a vast number of applications have been proposed since the two techniques were first reported, none has been applied to real practical use. This calls for an update in the recent fundamental and application studies of SERS and TERS. Thus, the goals and scope of this review are to report new directions and perspectives of SERS and TERS, mainly from the viewpoint of combining their mechanism and application studies. Regarding the recent progress in SERS and TERS, this review discusses four main topics: (1) nanometer to subnanometer plasmonic hotspots for SERS; (2) Ångström resolved TERS; (3) chemical mechanisms, i.e., charge-transfer mechanism of SERS and semiconductor-enhanced Raman scattering; and (4) the creation of a strong bridge between the mechanism studies and applications.

Machine learning for nanoplasmonics

Plasmonic nanomaterials have outstanding optoelectronic properties potentially enabling the next generation of catalysts, sensors, lasers and photothermal devices. Owing to optical and electron techniques, modern nanoplasmonics research generates large datasets characterizing features across length scales. Furthermore, optimizing syntheses leading to specific nanostructures requires time-consuming multiparametric approaches. These complex datasets and trial-and-error practices make nanoplasmonics research ripe for the application of machine learning (ML) and advanced data processing methods. ML algorithms capture relationships between synthesis, structure and performance in a way that far exceeds conventional simulation and theory approaches, enabling effective performance optimization. For example, neural networks can tailor the nanostructure morphology to target desired properties, identify synthetic conditions and extract quantitative information from complex data. Here we discuss the nascent field of ML for nanoplasmonics, describe the opportunities and limitations of ML in nanoplasmonic research, and conclude that ML is potentially transformative, especially if the community curates and shares its big data.

High-sensitivity hyperspectral vibrational imaging of heart tissues by mid-infrared photothermal microscopy

Visualizing the spatial distribution of chemical compositions in biological tissues is of great importance to study fundamental biological processes and origin of diseases. Raman microscopy, one of the label-free vibrational imaging techniques, has been employed for chemical characterization of tissues. However, the low sensitivity of Raman spectroscopy often requires a long acquisition time of Raman measurement or a high laser power, or both, which prevents one from investigating large-area tissues in a nondestructive manner. In this work, we demonstrated chemical imaging of heart tissues using mid-infrared photothermal (MIP) microscopy that simultaneously achieves the high sensitivity benefited from IR absorption of molecules and the high spatial resolution down to a few micrometers. We successfully visualized the distributions of different biomolecules, including proteins, phosphate-including proteins, and lipids/carbohydrates/amino acids. Further, we experimentally compared MIP microscopy with Raman microscopy to evaluate the sensitivity and photodamage to tissues. We proved that MIP microscopy is a highly sensitive technique for obtaining vibrational information of molecules in a broad fingerprint region, thereby it could be employed for biological and diagnostic applications, such as live-tissue imaging.

Investigation of SERS Frequency Fluctuations Relevant to Sensing and Catalysis

The excitation of plasmon resonances on nanoparticles generates locally enhanced electric fields commonly used for sensing applications and energetic charge carriers can drive chemical transformations as photocatalysts. The surface-enhanced Raman scattering (SERS) spectra from mercaptobenzoic acid (MBA) adsorbed to gold nanoparticles (AuNP) and silica encapsulated gold nanoparticles (AuNP@silica) can be used to assess the impact of energetic charge carriers on the observed signal. Measurements were recorded using a traditional point focused Raman spectroscopy and a wide-field spectral imaging approach to assess changes in the spectra of the different particles at increasing power density. The wide-field approach provides an increase in sampling statistics and shows evidence of SERS frequency fluctuations from MBA at low power densities, where it is commonly difficult to record spectra from a point focused spot. The increased spectral resolution of the point spectroscopy measurement provides improved peak identification and the ability to correlate the frequency fluctuations to charged intermediate species. Interestingly, our work suggests that isolated nanoparticles may undergo frequency fluctuations more readily than aggregates.

A Wide-Field Imaging Approach for Simultaneous Super-Resolution Surface-Enhanced Raman Scattering Bioimaging and Spectroscopy

High spatial resolution imaging and chemical-specific detection in living organisms is important in a wide range of fields from medicine to catalysis. In this work, we characterize a wide-field surface-enhanced Raman scattering (SERS) imaging approach capable of simultaneously capturing images and SERS spectra from nanoparticle SERS tags in cancer cells. By passing the image through a transmission diffraction grating before it reaches an array detector, we record the image and wavelength dispersed signal simultaneously on the camera sensor. Optimization of the experiment provides an approach with better spectral resolution and more rapid acquisition than liquid crystal tunable filters commonly used for wide-field SERS imaging. Intensity fluctuations inherent to SERS enabled localization algorithms to be applied to both the spatial and spectral domain, providing super-resolution SERS images that are correlated with improved peak positions identified in the spectrum of the SERS tag. The detected Raman signal is shown to be sensitive to the focal plane, providing three-dimensional (3D) sectioning abilities for the detected nanoparticles. Our work demonstrates spectrally resolved super-resolution SERS imaging that has the potential to be applied to complex physical and biological imaging applications.

Plasmonic reactivity of halogen thiophenols on gold nanoparticles studied by SERS and XPS

Localized surface plasmon resonances on noble metal nanoparticles (NPs) can efficiently drive reactions of adsorbed ligand molecules and provide versatile opportunities in chemical synthesis. The driving forces of these reactions are typically elevated temperatures, hot charge carriers or enhanced electric fields. In the present work the dehalogenation of halogenated thiophenols on the surface of AuNPs has been studied by surface enhanced Raman scattering (SERS) as a function of the photon energy to track the kinetics and identify reaction products. Reaction rates are found to be surprisingly similar for the different halothiophenols studied here, although the bond dissociation energies of the C-X bonds differ significantly. Complementary information about the electronic properties at the AuNP surface, namely work-function and valence band states, have been determined by X-ray photoelectron spectroscopy (XPS) of isolated AuNPs in the gas-phase. In this way, it is revealed how the electronic properties are altered by the adsorption of the ligand molecules, and we conclude that the reaction rates are mainly determined by the plasmonic properties of the AuNPs. SERS spectra reveal differences in the reaction product formation for the different halogen species and on this basis the possible reaction mechanisms are discussed to approach an understanding of opportunities and limitations in the design of catalytical systems with plasmonic NPs.

Radical-Mediated C-C Coupling of Alcohols Induced by Plasmonic Hot Carriers

The C-C coupling reactions of aliphatic alcohols to aromatics and larger-mass compounds have large endothermicities and activation energies, calling for catalysts operating at high temperatures. Here, we demonstrate that plasmon-excited nanoparticles catalyze the C-C coupling of aliphatic alcohols at room temperature to produce polyaromatic hydrocarbons and graphene oxide. The conversion is quenched by radical and electron scavengers and by the surface passivation of metals, suggesting that the reaction proceeds through alkoxy, peroxyl, hydroxyalkyl, and alkyl radical intermediates created by the metal to molecule transfer of plasmonic hot carriers. Besides being the first realization of C-C coupling of aliphatic alcohols at room temperature, the result constitutes a rare example of an endothermic plasmon-induced reaction producing new bonds and a new method for photogenerating graphene derivatives. More importantly, the result demonstrates the facile generation of organic radicals directly from alcohols, which may be used as precursors for radical-based organic reactions.

Experimental characterization techniques for plasmon-assisted chemistry

Plasmon-assisted chemistry is the result of a complex interplay between electromagnetic near fields, heat and charge transfer on the nanoscale. The disentanglement of their roles is non-trivial. Therefore, a thorough knowledge of the chemical, structural and spectral properties of the plasmonic/molecular system being used is required. Specific techniques are needed to fully characterize optical near fields, temperature and hot carriers with spatial, energetic and/or temporal resolution. The timescales for all relevant physical and chemical processes can range from a few femtoseconds to milliseconds, which necessitates the use of time-resolved techniques for monitoring the underlying dynamics. In this Review, we focus on experimental techniques to tackle these challenges. We further outline the difficulties when going from the ensemble level to single-particle measurements. Finally, a thorough understanding of plasmon-assisted chemistry also requires a substantial joint experimental and theoretical effort.

Microscopic Understanding of Reaction Rates Observed in Plasmon Chemistry of Nanoparticle-Ligand Systems

Surface-enhanced Raman scattering (SERS) is an effective and widely used technique to study chemical reactions induced or catalyzed by plasmonic substrates, since the experimental setup allows us to trigger and track the reaction simultaneously and identify the products. However, on substrates with plasmonic hotspots, the total signal mainly originates from these nanoscopic volumes with high reactivity and the information about the overall consumption remains obscure in SERS measurements. This has important implications; for example, the apparent reaction order in SERS measurements does not correlate with the real reaction order, whereas the apparent reaction rates are proportional to the real reaction rates as demonstrated by finite-difference time-domain (FDTD) simulations. We determined the electric field enhancement distribution of a gold nanoparticle (AuNP) monolayer and calculated the SERS intensities in light-driven reactions in an adsorbed self-assembled molecular monolayer on the AuNP surface. Accordingly, even if a high conversion is observed in SERS due to the high reactivity in the hotspots, most of the adsorbed molecules on the AuNP surface remain unreacted. The theoretical findings are compared with the hot-electron-induced dehalogenation of 4-bromothiophenol, indicating a time dependency of the hot-carrier concentration in plasmon-mediated reactions. To fit the kinetics of plasmon-mediated reactions in plasmonic hotspots, fractal-like kinetics are well suited to account for the inhomogeneity of reactive sites on the substrates, whereas also modified standard kinetics model allows equally well fits. The outcomes of this study are on the one hand essential to derive a mechanistic understanding of reactions on plasmonic substrates by SERS measurements and on the other hand to drive plasmonic reactions with high local precision and facilitate the engineering of chemistry on a nanoscale.

Controlling Localized Plasmons via an Atomistic Approach: Attainment of Site-Selective Activation inside a Single Molecule

Chemical reactions such as bond dissociation and formation assisted by localized surface plasmons (LSPs) of noble metal nanostructures hold promise in solar-to-chemical energy conversion. However, the precise control of localized plasmons to activate a specific moiety of a molecule, in the presence of multiple chemically equivalent parts within a single molecule, is scarce due to the relatively large lateral distribution of the plasmonic field. Herein, we report the plasmon-assisted dissociation of a specific molecular site (C-Si bond) within a polyfunctional molecule adsorbed on a Cu(100) surface in the scanning tunneling microscope (STM) junction. The molecular site to be activated can be selected by carefully positioning the tip and bringing the tip extremely close to the molecule (atomistic approach), thereby achieving plasmonic nanoconfinement at the tip apex. Furthermore, multiple reactive sites are activated in a sequential manner at the sub-molecular scale, and different sets of products are created and visualized by STM topography and density functional theory (DFT) modeling. The illustration of site-selective activation achieved by localized surface plasmons implies the realization of molecular-scale resolution for bond-selected plasmon-induced chemistry.

Spatial Separation of Plasmonic Hot-Electron Generation and a Hydrodehalogenation Reaction Center Using a DNA Wire

Using hot charge carriers far from a plasmonic nanoparticle surface is very attractive for many applications in catalysis and nanomedicine and will lead to a better understanding of plasmon-induced processes, such as hot-charge-carrier- or heat-driven chemical reactions. Herein we show that DNA is able to transfer hot electrons generated by a silver nanoparticle over several nanometers to drive a chemical reaction in a molecule nonadsorbed on the surface. For this we use 8-bromo-adenosine introduced in different positions within a double-stranded DNA oligonucleotide. The DNA is also used to assemble the nanoparticles into nanoparticles ensembles enabling the use of surface-enhanced Raman scattering to track the decomposition reaction. To prove the DNA-mediated transfer, the probe molecule was insulated from the source of charge carriers, which hindered the reaction. The results indicate that DNA can be used to study the transfer of hot electrons and the mechanisms of advanced plasmonic catalysts.

Spectrally Resolved Surface-Enhanced Raman Scattering Imaging Reveals Plasmon-Mediated Chemical Transformations

Challenges investigating molecules on plasmonic nanostructures have limited understanding of these interactions. However, the chemically specific information in the surface-enhanced Raman scattering (SERS) spectrum can identify perturbations in the adsorbed molecules to provide insight relevant to applications in sensing, catalysis, and energy conversion. Here, we demonstrate spectrally resolved SERS imaging, to simultaneously image and collect the SERS spectra from molecules adsorbed on individual nanoparticles. We observe intensity and frequency fluctuations in the SERS signal on the time scale of tens of milliseconds from n-mercaptobenzoic acid (MBA) adsorbed to gold nanoparticles. The SERS signal fluctuations correlate with density functional theory calculations of radicals generated by the interaction between MBA and plasmon-generated hot electrons. Applying localization microscopy to the data provides a super-resolution spectrally resolved map that indicates the plasmonic-induced molecular charging occurs on the extremities of the nanoparticles, where the localized electromagnetic field is reported to be most intense.

Spectroscopic evidence on the acetonitrile cleavage at mild condition

Among the present numerous chemical libraries, acetonitrile is the one of famous common organic solvents widely used in modern science and industry. Since it has been known as very stable and inert solvent, there has been little doubt on its catalytic decomposition to cyanide in mild condition. In this report, I provide new evidence on the catalytic decomposition of acetonitrile at conventional gold surfaces without any electrochemical treatment. Various surface enhanced Raman spectroscopic (SERS) measurements on high-purity acetonitrile reveal that the observed anomalous peak originates from the plasmonically cleaved cyanide group on SERS-active gold surface, which is also supported by the results of time of flight-secondary ion mass spectrometry (TOF-SIMS). This work sheds light on the plasmonic induced unprecedented reaction of the small chemical species that have been known intact.

Energy-resolved plasmonic chemistry in individual nanoreactors

Plasmonic resonances can concentrate light into exceptionally small volumes, which approach the molecular scale. The extreme light confinement provides an advantageous pathway to probe molecules at the surface of plasmonic nanostructures with highly sensitive spectroscopies, such as surface-enhanced Raman scattering. Unavoidable energy losses associated with metals, which are usually seen as a nuisance, carry invaluable information on energy transfer to the adsorbed molecules through the resonance linewidth. We measured a thousand single nanocavities with sharp gap plasmon resonances spanning the red to near-infrared spectral range and used changes in their linewidth, peak energy and surface-enhanced Raman scattering spectra to monitor energy transfer and plasmon-driven chemical reactions at their surface. Using methylene blue as a model system, we measured shifts in the absorption spectrum of molecules following surface adsorption and revealed a rich plasmon-driven reactivity landscape that consists of distinct reaction pathways that occur in separate resonance energy windows.

Damage Induced to DNA and Its Constituents by 0-3 eV UV Photoelectrons†

The complex physical and chemical interactions between DNA and 0-3 eV electrons released by UV photoionization can lead to the formation of various lesions such as base modifications and cleavage, crosslinks and single strand breaks. Furthermore, in the presence of platinum chemotherapeutic agents, these electrons can cause clustered lesions, including double strand breaks. We explain the mechanisms responsible for these damages via the production 0-3 eV electrons by UVC radiation, and by UV photons of any wavelengths, when they are produced by photoemission from nanoparticles lying within about 10 nm from DNA. We review experimental evidence showing that a single 0-3 eV electron can produce these damages. The foreseen benefits UV-irradiation of nanoparticles targeted to the cell nucleus are mentioned in the context of cancer therapy, as well as the potential hazards to human health when they are present in cells.

Revealing DNA Structure at Liquid/Solid Interfaces by AFM-Based High-Resolution Imaging and Molecular Spectroscopy

DNA covers the genetic information in all living organisms. Numerous intrinsic and extrinsic factors may influence the local structure of the DNA molecule or compromise its integrity. Detailed understanding of structural modifications of DNA resulting from interactions with other molecules and surrounding environment is of central importance for the future development of medicine and pharmacology. In this paper, we review the recent achievements in research on DNA structure at nanoscale. In particular, we focused on the molecular structure of DNA revealed by high-resolution AFM (Atomic Force Microscopy) imaging at liquid/solid interfaces. Such detailed structural studies were driven by the technical developments made in SPM (Scanning Probe Microscopy) techniques. Therefore, we describe here the working principles of AFM modes allowing high-resolution visualization of DNA structure under native (liquid) environment. While AFM provides well-resolved structure of molecules at nanoscale, it does not reveal the chemical structure and composition of studied samples. The simultaneous information combining the structural and chemical details of studied analyte allows achieve a comprehensive picture of investigated phenomenon. Therefore, we also summarize recent molecular spectroscopy studies, including Tip-Enhanced Raman Spectroscopy (TERS), on the DNA structure and its structural rearrangements.

Advancing Plasmon-Induced Selectivity in Chemical Transformations with Optically Coupled Transmission Electron Microscopy

Nanoparticle photocatalysts are essential to processes ranging from chemical production and water purification to air filtration and surgical instrument sterilization. Photochemical reactions are generally mediated by the illumination of metallic and/or semiconducting nanomaterials, which provide the necessary optical absorption, electronic band structure, and surface faceting to drive molecular reactions. However, with reaction efficiency and selectivity dictated by atomic and molecular interactions, imaging and controlling photochemistry at the atomic scale are necessary to both understand reaction mechanisms and to improve nanomaterials for next-generation catalysts. Here, we describe how advances in plasmonics, combined with advances in electron microscopy, particularly optically coupled transmission electron microscopy (OTEM), can be used to image and control light-induced chemical transformations at the nanoscale. We focus on our group's research investigating the interaction between hydrogen gas and Pd nanoparticles, which presents an important model system for understanding both hydrogenation catalysis and hydrogen storage. The studies described in this Account primarily rely on an environmental transmission electron microscope, a tool capable of circumventing traditional TEM's high-vacuum requirements, outfitted with optical sources and detectors to couple light into and out of the microscope. First, we describe the H₂ loading kinetics of individual Pd nanoparticles. When confined to sizes of less than ∼100 nm, single-crystalline Pd nanoparticles exhibit coherent phase transformations between the hydrogen-poor α-phase and hydrogen-rich β-phase, as revealed through monitoring the bulk plasmon resonance with electron energy loss spectroscopy. Next, we describe how contrast imaging techniques, such as phase contrast STEM and displaced-aperture dark field, can be employed as real-time techniques to image phase transformations with 100 ms temporal resolution. Studies of multiply twinned Pd nanoparticles and high aspect ratio Pd nanorods demonstrate that internal strain and grain boundaries can lead to partial hydrogenation within individual nanoparticles. Finally, we describe how OTEM can be used to locally probe nanoparticle dynamics under optical excitation and in reactive chemical environments. Under illumination, multicomponent plasmonic photocatalysts consisting of a gold nanoparticle "antenna" and a Pd "reactor" show clear α-phase nucleation in regions close to electromagnetic "hot spots" when near plasmonic antennas. Importantly, these hot spots need not correspond to the traditionally active, energetically preferred sites of catalytic nanoparticles. Nonthermal effects imparted by plasmonic nanoparticles, including electromagnetic field enhancement and plasmon-derived hot carriers, are crucial to explaining the site selectivity observed in PdH_x phase transformations under illumination. This Account demonstrates how light can contribute to selective chemical phenomena in plasmonic heterostructures, en route to sustainable, solar-driven chemical production.

Tip-Enhanced Raman Analysis of Plasmonic and Photocatalytic Properties of Copper Nanomaterials

Theoretical predictions suggest that, in addition to gold (Au) and silver (Ag), several other metals such as copper (Cu) and aluminum (Al) can be used as plasmonic materials. However, their plasmonic and photocatalytic properties remain poorly understood. In this contribution, we employed tip-enhanced Raman spectroscopy to examine photocatalytic properties of Cu nanowires and nanocubes (CuNWs and CuNCs). Our results show that both CuNWs and CuNCs demonstrate a far more efficient photocatalytic dimerization of 4-nitrobenzenethiol to 4,4'-dimercaptoazobenzene than Au nano and microplates. We also found that CuNWs and CuNCs can neither reduce 4-mercaptobenzoic acid (4-MBA) to the corresponding aromatic alcohol nor dearboxylate it forming benzenethiol. We infer that this is due to a unique coordination of 4-MBA on Cu surfaces that was only rarely observed on Au and Ag nanomaterials. Finally, we found that Cu nanostructures can oxidize 4-mercapto-phenyl-methanol to 4-MBA, which was previously only observed on gold-platinum nanoplates.

In-situ nanospectroscopic imaging of plasmon-induced two-dimensional [4+4]-cycloaddition polymerization on Au(111)

Plasmon-induced chemical reactions (PICRs) have recently become promising approaches for highly efficient light-chemical energy conversion. However, an in-depth understanding of their mechanisms at the nanoscale still remains challenging. Here, we present an in-situ investigation by tip-enhanced Raman spectroscopy (TERS) imaging of the plasmon-induced [4+4]-cycloaddition polymerization within anthracene-based monomer monolayers physisorbed on Au(111), and complement the experimental results with density functional theory (DFT) calculations. This two-dimensional (2D) polymerization can be flexibly triggered and manipulated by the hot carriers, and be monitored simultaneously by TERS in real time and space. TERS imaging provides direct evidence for covalent bond formation with ca. 3.7 nm spatial resolution under ambient conditions. Combined with DFT calculations, the TERS results demonstrate that the lateral polymerization on Au(111) occurs by a hot electron tunneling mechanism, and crosslinks form via a self-stimulating growth mechanism. We show that TERS is promising to be plasmon-induced nanolithography for organic 2D materials.

Low-Energy Electron Damage to Condensed-Phase DNA and Its Constituents

The complex physical and chemical reactions between the large number of low-energy (0-30 eV) electrons (LEEs) released by high energy radiation interacting with genetic material can lead to the formation of various DNA lesions such as crosslinks, single strand breaks, base modifications, and cleavage, as well as double strand breaks and other cluster damages. When crosslinks and cluster damages cannot be repaired by the cell, they can cause genetic loss of information, mutations, apoptosis, and promote genomic instability. Through the efforts of many research groups in the past two decades, the study of the interaction between LEEs and DNA under different experimental conditions has unveiled some of the main mechanisms responsible for these damages. In the present review, we focus on experimental investigations in the condensed phase that range from fundamental DNA constituents to oligonucleotides, synthetic duplex DNA, and bacterial (i.e., plasmid) DNA. These targets were irradiated either with LEEs from a monoenergetic-electron or photoelectron source, as sub-monolayer, monolayer, or multilayer films and within clusters or water solutions. Each type of experiment is briefly described, and the observed DNA damages are reported, along with the proposed mechanisms. Defining the role of LEEs within the sequence of events leading to radiobiological lesions contributes to our understanding of the action of radiation on living organisms, over a wide range of initial radiation energies. Applications of the interaction of LEEs with DNA to radiotherapy are briefly summarized.

Theory of "Hot" Photoluminescence from Drude Metals

We provide a complete quantitative theory for light emission from Drude metals under continuous wave illumination, based on our recently derived steady-state nonequilibrium electron distribution. We show that the electronic contribution to the emission exhibits a dependence on the emission frequency which is very similar to the energy dependence of the nonequilibrium distribution, and characterize different scenarios determining the measurable emission line shape. This enables the identification of experimentally relevant situations, where the emission lineshapes deviate significantly from predictions based on the standard theory (namely, on the photonic density of states), and enables the differentiation between cases where the emission scales with the metal object surface or with its volume. We also provide an analytic description (which is absent from the literature) of the (polynomial) dependence of the metal emission on the electric field, its dependence on the pump laser frequency, and its nontrivial exponential dependence on the electron temperature, both for the Stokes and anti-Stokes regimes. Our results imply that the emission does not originate from either Fermion statistics (due to e-e interactions), and even though one could have expected the emission to follow boson statistics due to involvement of photons (as in Planck's Black Body emission), it turns out that it deviates from that form as well. Finally, we resolve the arguments associated with the effects of electron and lattice temperatures on the emission, and which of them can be extracted from the anti-Stokes emission.

Plasmon-Driven Chemistry on Mono- and Bimetallic Nanostructures

ConspectusHot carriers are highly energetic species that can perform a large spectrum of chemical reactions. They are generated on the surfaces of nanostructures via direct interband, phonon-assisted intraband, and geometry-assisted decay of localized surface plasmon resonances (LSPRs), which are coherent oscillations of conductive electrons. LSPRs can be induced on the surface of noble metal (Ag or Au) nanostructures by illuminating the surfaces with electromagnetic irradiation. These noble metals can be coupled with catalytic metals, such as Pt, Pd, and Ru, to develop bimetallic nanostructures with unique catalytic activities. The plasmon-driven catalysis on bimetallic nanostructures is light-driven, which essentially enables green chemistry in organic synthesis. During the past decade, surface-enhanced Raman spectroscopy (SERS) has been actively utilized to study the mechanisms of plasmon-driven reactions on mono- and bimetallic nanostructures. SERS has provided a wealth of knowledge about the mechanisms of numerous plasmon-driven redox, coupling, and scissoring reactions. However, the nanoscale catalytic properties of both mono- and bimetallic nanostructures as well as the underlying physical cause of their catalytic reactivity and selectivity remained unclear for decades.In this Account, we focus on the most recent findings reported by our and other research groups that shed light on the nanoscale properties of mono- and bimetallic nanostructures. This information was revealed by tip-enhanced Raman spectroscopy (TERS), a modern analytical technique that has single-molecule sensitivity and subnanometer spatial resolution. TERS findings have shown that plasmonic reactivity and the selectivity of bimetallic nanostructures are governed by the nature of the catalytic metal and the strength of the rectified electric field on their surfaces. TERS has also revealed that the catalytic properties of bimetallic nanostructures directly depend on the interplay between the catalytic and plasmonic metals. We anticipate that these findings will be used to tailor synthetic approaches that are used to fabricate novel nanostructures with desired catalytic properties. The experimental and theoretical results discussed in this Account will facilitate a better understanding of TERS and explain artifacts that could be encountered upon TERS imaging of a large variety of samples. Consequently, plasmon-driven chemistry should be considered as an essential part of near-field microscopy.

Anti-Stokes Thermometry in Nanoplasmonics

Whereas heating nanoparticles with light is straightforward, measuring the resulting nanoscale temperature increase is intricate and still a matter of active research in plasmonics, with envisioned applications in nanochemistry, biomedicine, and solar light harvesting, among others. Interestingly, this research line mostly belongs to the optics community today because light is not only used for heating but also often for probing temperature. In this Perspective, I present and discuss recent advances in the search for efficient and reliable thermometry techniques for nanoplasmonic systems by the nano-optics community. I focus on the recently proposed approach based on the spectral measurement of anti-Stokes emission from the plasmonic nanoparticles themselves.

Plasmon-assisted click chemistry at low temperature: an inverse temperature effect on the reaction rate

Plasmon assistance promotes a range of chemical transformations by decreasing their activation energies. In a common case, thermal and plasmon assistance work synergistically: higher temperature results in higher plasmon-enhanced catalysis efficiency. Herein, we report an unexpected tenfold increase in the reaction efficiency of surface plasmon-assisted Huisgen dipolar azide-alkyne cycloaddition (AAC) when the reaction mixture is cooled from room temperature to -35 °C. We attribute the observed increase in the reaction efficiency to complete plasmon-induced annihilation of the reaction barrier, prolongation of plasmon lifetime, and decreased relaxation of plasmon-excited-states under cooling. Furthermore, control quenching experiments supported by theoretical calculations indicate that plasmon-mediated substrate excitation to an electronic triplet state may play the key role in plasmon-assisted chemical transformation. Last but not least, we demonstrated the possible applicability of plasmon assistance to biological systems by AAC coupling of biotin to gold nanoparticles performed at -35 °C.

Toward rapid infectious disease diagnosis with advances in surface-enhanced Raman spectroscopy

In a pandemic era, rapid infectious disease diagnosis is essential. Surface-enhanced Raman spectroscopy (SERS) promises sensitive and specific diagnosis including rapid point-of-care detection and drug susceptibility testing. SERS utilizes inelastic light scattering arising from the interaction of incident photons with molecular vibrations, enhanced by orders of magnitude with resonant metallic or dielectric nanostructures. While SERS provides a spectral fingerprint of the sample, clinical translation is lagged due to challenges in consistency of spectral enhancement, complexity in spectral interpretation, insufficient specificity and sensitivity, and inefficient workflow from patient sample collection to spectral acquisition. Here, we highlight the recent, complementary advances that address these shortcomings, including (1) design of label-free SERS substrates and data processing algorithms that improve spectral signal and interpretability, essential for broad pathogen screening assays; (2) development of new capture and affinity agents, such as aptamers and polymers, critical for determining the presence or absence of particular pathogens; and (3) microfluidic and bioprinting platforms for efficient clinical sample processing. We also describe the development of low-cost, point-of-care, optical SERS hardware. Our paper focuses on SERS for viral and bacterial detection, in hopes of accelerating infectious disease diagnosis, monitoring, and vaccine development. With advances in SERS substrates, machine learning, and microfluidics and bioprinting, the specificity, sensitivity, and speed of SERS can be readily translated from laboratory bench to patient bedside, accelerating point-of-care diagnosis, personalized medicine, and precision health.

From SERS to TERS and Beyond: Molecules as Probes of Nanoscopic Optical Fields

A detailed understanding of the interaction between molecules and plasmonic nanostructures is important for several exciting developments in (bio)molecular sensing and imaging, catalysis, as well as energy conversion. While much of the focus has been on the nanostructures that generate enhanced and nano-confined optical fields, we herein highlight recent work from our groups that uses the molecular response in surface and tip enhanced Raman scattering (SERS and TERS, respectively) to investigate different aspects of the local fields. TERS provides access to ultra-confined volumes, and as a result can further explore and explain ensemble-averaged SERS measurements. Exciting and distinct molecular behaviors are observed in the quantum limit of plasmons, including molecular charging, chemical conversion, and optical rectification. Evidence of multipolar Raman scattering from molecules additionally provides insights into the inhomogeneous electric fields that drive SERS and TERS and their spatial and temporal gradients. The time scales of these processes show evidence of cooperative nanoscale phenomena that altogether contribute to SERS and TERS.

The Expanding Frontiers of Tip-Enhanced Raman Spectroscopy

Fundamental understanding of chemistry and physical properties at the nanoscale enables the rational design of interface-based systems. Surface interactions underlie numerous technologies ranging from catalysis to organic thin films to biological systems. Since surface environments are especially prone to heterogeneity, it becomes crucial to characterize these systems with spatial resolution sufficient to localize individual active sites or defects. Spectroscopy presents as a powerful means to understand these interactions, but typical light-based techniques lack sufficient spatial resolution. This review describes the growing number of applications for the nanoscale spectroscopic technique, tip-enhanced Raman spectroscopy (TERS), with a focus on developments in areas that involve measurements in new environmental conditions, such as liquid, electrochemical, and ultrahigh vacuum. The expansion into unique environments enables the ability to spectroscopically define chemistry at the spatial limit. Through the confinement and enhancement of light at the apex of a plasmonic scanning probe microscopy tip, TERS is able to yield vibrational fingerprint information of molecules and materials with nanoscale resolution, providing insight into highly localized chemical effects.

Optical scanning tunneling microscopy based chemical imaging and spectroscopy

Through coupling optical processes with the scanning tunneling microscope (STM), single-molecule chemistry and physics have been investigated at the ultimate spatial and temporal limit. Electrons and photons can be used to drive interactions and reactions in chemical systems and simultaneously probe their characteristics and consequences. In this review we introduce and review methods to couple optical imaging and spectroscopy with scanning tunneling microscopy. The integration of the STM and optical spectroscopy provides new insights into individual molecular adsorbates, surface-supported molecular assemblies, and two-dimensional materials with subnanoscale resolution, enabling the fundamental study of chemistry at the spatial and temporal limit. The inelastic scattering of photons by molecules and materials, that results in unique and sensitive vibrational fingerprints, will be considered with tip-enhanced Raman spectroscopy. STM-induced luminescence examines the intrinsic luminescence of organic adsorbates and their energy transfer and charge transfer processes with their surroundings. We also provide a survey of recent efforts to probe the dynamics of optical excitation at the molecular level with scanning tunneling microscopy in the context of light-induced photophysical and photochemical transformations.

Electrically Driven Hot-Carrier Generation and Above-Threshold Light Emission in Plasmonic Tunnel Junctions

Above-threshold light emission from plasmonic tunnel junctions, when emitted photons have energies significantly higher than the energy scale of incident electrons, has attracted much recent interest in nano-optics, while the underlying physics remains elusive. We examine above-threshold light emission in electromigrated tunnel junctions. Our measurements over a large ensemble of devices demonstrate a giant (∼10⁴) material-dependent photon yield (emitted photons per incident electrons). This dramatic effect cannot be explained only by the radiative field enhancement due to localized plasmons in the tunneling gap. Emission is well described by a Boltzmann spectrum with an effective temperature exceeding 2000 K, coupled to a plasmon-modified photonic density of states. The effective temperature is approximately linear in the applied bias, consistent with a suggested theoretical model describing hot-carrier dynamics driven by nonradiative decay of electrically excited localized plasmons. Electrically generated hot carriers and nontraditional light emission could open avenues for active photochemistry, optoelectronics, and quantum optics.

Infrared and Raman chemical imaging and spectroscopy at the nanoscale

The advent of nanotechnology, and the need to understand the chemical composition at the nanoscale, has stimulated the convergence of IR and Raman spectroscopy with scanning probe methods, resulting in new nanospectroscopy paradigms. Here we review two such methods, namely photothermal induced resonance (PTIR), also known as AFM-IR and tip-enhanced Raman spectroscopy (TERS). AFM-IR and TERS fundamentals will be reviewed in detail together with their recent crucial advances. The most recent applications, now spanning across materials science, nanotechnology, biology, medicine, geology, optics, catalysis, art conservation and other fields are also discussed. Even though AFM-IR and TERS have developed independently and have initially targeted different applications, rapid innovation in the last 5 years has pushed the performance of these, in principle spectroscopically complimentary, techniques well beyond initial expectations, thus opening new opportunities for their convergence. Therefore, subtle differences and complementarity will be highlighted together with emerging trends and opportunities.

Surface Enhanced Raman Scattering Selectivity in Proteins Arises from Electron Capture and Resonant Enhancement of Radical Species

Plasmon-enhanced Raman scattering is a powerful approach to detecting and characterizing proteins in live and dynamic biological systems. However, the selective detection/enhancement of specific residues as well as spectral diffusion and fluctuations have complicated the interpretation of enhanced Raman spectra and images of biological matter. In this work, we demonstrate that the amino acid tryptophan (Trp) can capture an electron from an excited plasmon, which generates a radical anion that is resonantly enhanced: a visible excited electronic state slides into resonance upon charging. This surface enhanced resonance Raman scattering (SERRS) mechanism explains the persistence of Trp signatures in the SERS and TERS spectra of proteins. Evidence for this picture includes the observation of visible resonances in the UV-Vis extinction spectrum, changes in the ground state vibrational spectrum, and plasmon-resonance dependent behavior. DFT calculations support the experimental observations. The behavior observed from the free Trp molecule is shown to explain the SERS spectrum of the Trp-cage protein. In effect, resonant Raman scattering from radicals formed through plasmonic excitation represents an under-investigated mechanism that may be exploited for chemical sensing applications.

Comparing steady state photothermalization dynamics in copper and gold nanostructures

Metal nanostructures have been the focus of several recent studies due to their ability to generate high energy, non-equilibrium "hot" electrons for use in photochemical and photocatalytic applications. In particular, there is growing interest to understand how differences in the electronic structure and optical response of different metals may impact the behavior and utility of their hot electrons in chemical reactions. Using a continuous wave anti-Stokes Raman spectroscopy technique recently developed in our laboratory, in this study, we measured the temperature and lifetime of hot electrons in gold and copper nanostructures in order to understand how the choice of metal impacts hot electron dynamics during steady state illumination. We found that hot electrons in copper are more abundant and more reactive than those in gold, suggesting that copper nanostructures may be a more promising platform for performing hot electron photochemistry.

Present and Future of Surface-Enhanced Raman Scattering

The discovery of the enhancement of Raman scattering by molecules adsorbed on nanostructured metal surfaces is a landmark in the history of spectroscopic and analytical techniques. Significant experimental and theoretical effort has been directed toward understanding the surface-enhanced Raman scattering (SERS) effect and demonstrating its potential in various types of ultrasensitive sensing applications in a wide variety of fields. In the 45 years since its discovery, SERS has blossomed into a rich area of research and technology, but additional efforts are still needed before it can be routinely used analytically and in commercial products. In this Review, prominent authors from around the world joined together to summarize the state of the art in understanding and using SERS and to predict what can be expected in the near future in terms of research, applications, and technological development. This Review is dedicated to SERS pioneer and our coauthor, the late Prof. Richard Van Duyne, whom we lost during the preparation of this article.

How Peptides Dissociate in Plasmonic Hot Spots

Plasmon-induced hot carriers enable dissociation of strong chemical bonds by visible light. This unusual chemistry has been demonstrated for several diatomic and small organic molecules. Here, the scope of plasmon-driven photochemistry is extended to biomolecules and the reactivity of proteins and peptides in plasmonic hot spots is described. Tip-enhanced Raman spectroscopy (TERS) is used to both drive the reactions and to monitor their products. Peptide backbone bonds are found to dissociate in the hot spot, which is reflected in the disappearance of the amide I band in the TER spectra. The observed fragmentation pathway involves nonthermal activation, presumably by dissociative capture of a plasmon-induced hot electron. This fragmentation pathway is known from electron transfer dissociation (ETD) of peptides in gas-phase mass spectrometry (MS), which suggests a general similarity between plasmon-induced photochemistry and nonergodic reactions triggered by electron capture. This analogy may serve as a design principle for plasmon-induced reactions of biomolecules.

Investigation of copper oxidation states in plasmonic nanomaterials by XAS and Raman spectroscopy

A shell-isolated nanoparticle enhanced surface Raman technique and XANES for detection of copper(ii) or copper(i) plasmonic-nanocatalysts.