Tunable Nitric Oxide Release from S-Nitroso-N-acetylpenicillamine via Catalytic Copper Nanoparticles for Biomedical Applications

On-Demand Nitric Oxide Generation via Thermal Decomposition of N-Trityl Dihydro-1,2-Oxazines

Inhaled nitric oxide (iNO) is a promising therapy for a variety of pulmonary conditions but is limited by the cost, portability, and safety limitations of the compressed gas cylinders used in conventional iNO delivery systems. On-demand generation of iNO via thermally controlled decomposition of an NO-genic precursor is an attractive alternative to systems based on compressed gas cylinders. However, most NO-releasing materials, which would form the basis of such a system, are designed for in vivo applications, but not for gas flow release at elevated temperatures. Novel NO donors with tunable kinetics suited for simple thermal generation are needed to realize such iNO delivery systems. Here we report the development of a new class of NO donors based on N-trityl 3,6-dihydro-1,2-oxazines. We show that amorphous solid dispersions of these molecules in porous polymers exhibit consistent, thermoresponsive NO release in good yields when heated above 90 °C in the presence of a carrier gas. We further demonstrate that these donors undergo NO release in aqueous media at 37 °C. Collectively, this work adds a new class of NO donor to the basis set of known NO-genic molecules and establishes a potential chemical basis for a low-power, small-footprint iNO delivery system.

Investigation of the susceptibility of clinical infection loads to nitric oxide antibacterial treatment

The persistent infection of medical devices by opportunistic pathogens has led to the development of antimicrobial medical device polymers. Nitric oxide (NO) is an endogenous antimicrobial molecule that is released through the degradation of synthetic donor molecules such as S-nitroso-N-acetylpenicillamine (SNAP) embedded into polymer membranes. It is hypothesized that the clinical success of these polymers is enhanced by the physiological release of NO and the consequent prevention of infection. However, such NO-releasing materials have never been evaluated against microbial loads that are commensurate with clinical infection levels. This study aimed to develop a standardized polymer film impregnated with SNAP that consistently releases NO and evaluates its efficacy against bacterial loads that represent clinical infection parameters. Microbial loads of 103, 105, and 108 (colony-forming units) CFU mL-1 were exposed to the NO-releasing polymer, corresponding to bloodstream infections, catheter-associated urinary tract infections, and standard laboratory exposure levels that have been reported in the scientific literature. By 24 h, SNAP films led to >1 log reduction of adhered and viable E. coli at all tested microbial loads compared to control polydimethylsiloxane (PDMS). Further, SNAP films displayed no viable adhered S. aureus at the 103 microbial level for the entire study and showed total planktonic killing by 8 h. NO localization within bacterial cells adhering to the films was evaluated, revealing higher NO uptake and consequent bacterial killing by SNAP samples. This unique study shows that NO-releasing polymers not only kill bacteria adhered to the polymer surface, but localized delivery leads to environmental planktonic bacterial killing that prevents adhesion from occurring. Furthermore, the promising findings of NO-releasing polymers in scientific research indicate their potential for successful application in clinical settings to prevent infections.

Instant clot forming and antibacterial wound dressings: Achieving hemostasis in trauma injuries with S-nitroso-N-acetylpenicillamine-tranexamic acid-propolis formulation

Wound infection and excessive blood loss are the two major challenges associated with trauma injuries that account for 10% of annual deaths in the United States. Nitric oxide (NO) is a gasotransmitter cell signaling molecule that plays a crucial role in the natural wound healing process due to its antibacterial, anti-inflammatory, cell proliferation, and tissue remodeling abilities. Tranexamic acid (TXA), a prothrombotic agent, has been used topically and systemically to control blood loss in reported cases of epistaxis and combat-related trauma injuries. Its properties could be incorporated in wound dressings to induce immediate clot formation, which is a key factor in controlling excessive blood loss. This study introduces a novel, instant clot-forming NO-releasing dressing, and fabricated using a strategic bi-layer configuration. The layer adjacent to the wound was designed with TXA suspended on a resinous bed of propolis, which is a natural bioadhesive possessing antibacterial and anti-inflammatory properties. The base layer, located furthest away from the wound, has an NO donor, S-nitroso-N-acetylpenicillamine (SNAP), embedded in a polymeric bed of Carbosil®, a copolymer of polycarbonate urethane and silicone. Propolis was integrated with a uniform layer of TXA in variable concentrations: 2.5, 5.0, and 7.5 vol % of propolis. This design of the TXA-SNAP-propolis (T-SP) wound dressing allows TXA to form a more stable clot by preventing the lysis of fibrin. The lactate dehydrogenase-based platelet adhesion assay showed an increase in fibrin activation with 7.5% T-SP as compared with control within the first 15 min of its application. A scanning electron microscope (SEM) confirmed the presence of a dense fibrin network stabilizing the clot for fabricated dressing. The antibacterial activity of NO and propolis resulted in a 98.9 ± 1% and 99.4 ± 1% reduction in the colony-forming unit of Staphylococcus aureus and multidrug-resistant Acinetobacter baumannii, respectively, which puts forward the fabricated dressing as an emergency first aid for traumatic injuries, preventing excessive blood loss and soil-borne infections.

Burden of Chronic Nonhealing Wounds: An Overview of the Worldwide Humanistic and Economic Burden to the Healthcare System

Chronic wounds have long been a significant public health concern, but the true impact of these wounds is unknown since research designs and measuring techniques vary, leading to inconsistent estimates. The definition of a wound is a loss of epithelial continuity caused by damage to the tissue. The following conditions can cause chronic wounds: panniculitis, pyoderma gangrenosum, traumatic, neurological, metabolic, hematologic, neoplastic, or infection-related. The growing global incidence of diabetes and the aging population necessitate greater attention to chronic wounds. Regrettably, it is sad that significant healthcare institutions have overlooked wound research. The study of health-related illnesses and occurrences in particular populations, including their distribution, frequency, and determinants, and the application of this research to control health problems.

Copper-Cystine Biohybrid-Embedded Nanofiber Aerogels Show Antibacterial and Angiogenic Properties

Copper-cystine-based high aspect ratio structures (CuHARS) possess exceptional physical and chemical properties and exhibit remarkable biodegradability in human physiological conditions. Extensive testing has confirmed the biocompatibility and biodegradability of CuHARS under diverse biological conditions, making them a viable source of essential Cu2+. These ions are vital for catalyzing the production of nitric oxide (NO) from the decomposition of S-nitrosothiols (RSNOs) found in human blood. The ability of CuHARS to act as a Cu2+ donor under specific concentrations has been demonstrated in this study, resulting in the generation of elevated levels of NO. Consequently, this dual function makes CuHARS effective as both a bactericidal agent and a promoter of angiogenesis. In vitro experiments have shown that CuHARS actively promotes the migration and formation of complete lumens by redirecting microvascular endothelial cells. To maximize the benefits of CuHARS, they have been incorporated into biomimetic electrospun poly(ε-caprolactone)/gelatin nanofiber aerogels. Through the regulated release of Cu2+ and NO production, these channeled aerogels not only provide antibacterial support but also promote angiogenesis. Taken together, the inclusion of CuHARS in biomimetic scaffolds could hold great promise in revolutionizing tissue regeneration and wound healing.

Metal-organic framework-based platforms for implantation applications: recent advances and challenges

The development of minimally invasive technology has promoted the widespread use of implant interventional materials, which play an important role in alleviating patients' pain during and after surgery. Metal-organic frameworks (MOFs) and their related hybrids formed by bridging ligands and metal nodes via covalent bonds represent one of the smart platforms in implant interventional fields due to their large surface area, adjustable compositions and structures, biodegradability, etc. Significant progresses in the implantation application of MOF-based materials have been achieved recently, but these studies are still in the initial stage. This review highlights the recent advances of MOFs and their related hybrids in orthopedic implantation, cardio-vascular implantation, neural tissue engineering, and biochemical sensing. Each correction between the structural features of MOFs and their corresponding implanted works is highlighted. Finally, the confronting challenges and future perspectives in the implant interventional field are discussed.

Unravelling Surface Modification Strategies for Preventing Medical Device-Induced Thrombosis

The use of biomaterials in implanted medical devices remains hampered by platelet adhesion and blood coagulation. Thrombus formation is a prevalent cause of failure of these blood-contacting devices. Although systemic anticoagulant can be used to support materials and devices with poor blood compatibility, its negative effects such as an increased chance of bleeding, make materials with superior hemocompatibility extremely attractive, especially for long-term applications. This review examines blood-surface interactions, the pathogenesis of clotting on blood-contacting medical devices, popular surface modification techniques, mechanisms of action of anticoagulant coatings, and discusses future directions in biomaterial research for preventing thrombosis. In addition, this paper comprehensively reviews several novel methods that either entirely prevent interaction between material surfaces and blood components or regulate the reaction of the coagulation cascade, thrombocytes, and leukocytes.

Biomimetic catheter surface with dual action NO-releasing and generating properties for enhanced antimicrobial efficacy

Infection of indwelling catheters is a common healthcare problem, resulting in higher morbidity and mortality. The vulnerable population reliant on catheters post-surgery for food and fluid intake, blood transfusion, or urinary incontinence or retention is susceptible to hospital-acquired infection originating from the very catheter. Bacterial adhesion on catheters can take place during the insertion or over time when catheters are used for an extended period. Nitric oxide-releasing materials have shown promise in exhibiting antibacterial properties without the risk of antibacterial resistance which can be an issue with conventional antibiotics. In this study, 1, 5, and 10 wt % selenium (Se) and 10 wt % S-nitrosoglutathione (GSNO)-incorporated catheters were prepared through a layer-by-layer dip-coating method to demonstrate NO-releasing and NO-generating capability of the catheters. The presence of Se on the catheter interface resulted in a 5 times higher NO flux in 10% Se-GSNO catheter through catalytic NO generation. A physiological level of NO release was observed from 10% Se-GSNO catheters for 5 d, along with an enhanced NO generation via the catalytic activity as Se was able to increase NO availability. The catheters were also found to be compatible and stable when subjected to sterilization and storage, even at room temperature. Additionally, the catheters showed a 97.02% and 93.24% reduction in the adhesion of clinically relevant strains of Escherichia coli and Staphylococcus aureus, respectively. Cytocompatibility testing of the catheter with 3T3 mouse fibroblast cells supports the material's biocompatibility. These findings from the study establish the proposed catheter as a prospective antibacterial material that can be translated into a clinical setting to combat catheter-related infections.

Phase-transited lysozyme nanofilm with co-immobilized copper ion and heparin as cardiovascular stent multifunctional coating

Cardiovascular metal stents have shown potential in the treatment of coronary artery disease using percutaneous coronary intervention. However, thrombosis, endothelialization, and new atherosclerosis after stent implantation remain unsolved problems. Herein, a multifunctional coating material based on phase-transited lysozyme was developed to promote stent endothelialization and simultaneously reduce thrombus events by embedding moieties of heparin and co-immobilized copper ions for in-situ catalyzing nitric oxide (NO) generation. The lysozyme-based biomimetic coating is compatible with blood and enables facile loading and sustainable release of copper ions to produce NO with donors via catalytic reaction. The novel coating strategy displayed several bio-effects of anti-thrombosis; it synergistically promoted endothelial cell growth and inhibited smooth muscle cell growth. Thus, this systemic in vitro study will provide a foundation for developing multifunctional cardiovascular stents in clinical settings.

Catalytic effect of transition metal-doped medical grade polymer on S-nitrosothiol decomposition and its biological response

Nitric oxide (NO)-release from polymer metal composites is achieved through the incorporation of NO donors such as S-nitrosothiols (RSNO). Several studies have shown that metal nanoparticles catalytically decompose RSNO to release NO. In polymer composites, the NO surface flux from the surface can be modulated by the application of metal nanoparticles with a varying degree of catalytic activity. In this study, we compare the NO-releasing polymer composite design strategy - demonstrating how different ways of incorporating RSNO and metal nanoparticles can affect NO flux, donor leaching, or biological activity of the films. The first approach included blending both the RSNO and metal nanoparticle in the matrix (non-layered), while the second approach involved dip-coating metal nanoparticle/polymer layer on the RSNO-containing polymer composite (layered). Secondly, we compare both designs with respect to metal nanoparticles, including iron (Fe), copper (Cu), nickel (Ni), zinc (Zn), and silver (Ag). Differential NO surface flux is observed for each metal nanoparticle, with the Cu-containing polymer composites showing the highest flux for layered composites, whereas Fe demonstrated the highest NO flux for non-layered composites in 24 h. Additionally, a comparative study on NO flux modulation via the choice of metal nanoparticles is shown. Furthermore, mouse fibroblast cell viability when exposed to leachates from the polymer metal composites was dependent on (1) the design of the polymer composite where the layered approach performed better than non-layered composites (2) diffusion of metal nanoparticles from the composites plays a key role. Antibacterial activity on methicillin-resistant Staphylococcus aureus was also dependent on individual metal nanoparticles and flux levels in a 24 h in vitro CDC bioreactor study. Therefore, the study establishes the need for a layered polymer metal composite strategy that synergizes NO flux without negatively affecting biocompatibility.

Advances of plant and biomass extracted zirconium nanoparticles in dental implant application

Nanoparticles are minimal materials with unique physicochemical features that set them apart from bulk materials of the same composition. These properties make nanoparticles highly desirable for use in commercial and medical research. The primary intention for the development of nanotechnology is to achieve overarching social objectives like bettering our understanding of nature, boosting productivity, improving healthcare, and extending the bounds of sustainable development and human potential. Keeping this as a motivation, Zirconia nanoparticles are becoming the preferred nanostructure for modern biomedical applications. This nanotechnology is exceptionally versatile and has several potential uses in dental research. This review paper concentrated on the various benefits of zirconium nanoparticles in dentistry and how they provide superior strength and flexibility compared to their counterparts. Moreover, the popularity of zirconium nanoparticles is also growing as it has strong biocompatibility potency. Zirconium nanoparticles can be used to develop or address the major difficulty in dentistry. Therefore, this review paper aims to provide a summary of the fundamental research and applications of zirconium nanoparticles in dental implants.

Recent Advances in Functional Nanomaterials for Catalytic Generation of Nitric Oxide: A Mini Review

As a gaseous second messenger, nitric oxide (NO) plays an important role in a series of signal pathways. Research on the NO regulation for various disease treatments has aroused wide concern. However, the lack of accurate, controllable, and persistent release of NO has significantly limited the application of NO therapy. Profiting from the booming development of advanced nanotechnology, a mass of nanomaterials with the properties of controllable release have been developed to seek new and effective NO nano-delivery approaches. Nano-delivery systems that generate NO through catalytic reactions exhibit unique superiority in terms of precise and persistent release of NO. Although certain achievements have been made in the catalytically active NO delivery nanomaterials, some basic but critical issues, such as the concept of design, are of low attention. Herein, an overview of the generation of NO through catalytic reactions and the design principles of related nanomaterials are summarized. Then, the nanomaterials that generate NO through catalytic reactions are classified. Finally, the bottlenecks and perspectives are also discussed in depth for the future development of catalytical NO generation nanomaterials.

Polymeric Amines Induce Nitric Oxide Release from S-Nitrosothiols

Catalytic generation of nitric oxide (NO) from NO donors by nanomaterials has enabled prolonged NO delivery for various biomedical applications, but this approach requires laborious synthesis routes. In this study, a new class of materials, that is, polymeric amines including polyethyleneimine (PEI), poly-L-lysine, and poly(allylamine hydrochloride), is discovered to induce NO generation from S-nitrosothiols (RSNOs) at physiological conditions. Controlled NO generation can be readily achieved by tuning the concentration of the NO donors (RSNOs) and polymers, and the type and molecular weight of the polymers. Importantly, the mechanism of NO generation by these polymers is deciphered to be attributed to the nucleophilic reaction between primary amines on polymers and the SNO groups of RSNOs. The NO-releasing feature of the polymers can be integrated into a suite of materials, for example, simply by embedding PEI into poly(vinyl alcohol) (PVA) hydrogels. The functionality of the PVA/PEI hydrogels is demonstrated for Pseudomonas aeruginosa biofilm prevention with a ≈4 log reduction within 6 h. As NO has potential therapeutic implications in various diseases, the identification of polymeric amines to induce NO release will open new opportunities in NO-generating biomaterials for antibacterial, antiviral, anticancer, antithrombotic, and wound healing applications.

Silk fibroin/chitosan coating with tunable catalytic nitric oxide generation for surface functionalization of cardiovascular stents

Developing a functional coating for vascular stents with sustainable and tunable NO release remains challenging. In this work, we report a silk fibroin/chitosan-based biopolymer coating incorporating copper ions as a catalyst for NO generation and demonstrate its potential for the surface functionalization of cardiovascular stents. Based on the differences in silk fibroin and chitosan coordinating with copper ions, the loading, bonding, and release of copper ions could be precisely regulated over a wide range by controlling the ratio of silk fibroin and chitosan. This system shows good cytocompatibility for endothelial cells and tunable catalytic activity to decompose S-nitroso-N-acetyl-D-penicillamine (SNAP) for NO generation. Consequently, a functionalized coating with sustainable and tunable NO catalysis generation was developed on the metallic stent. Based on good biocompatibility, tunable NO release, and simple processing, the coating is expected to have great promise in the field of intervention therapy of cardiovascular disease.

Prevention and treatment of atherothrombosis: Potential impact of nanotechnology

Complications with atherosclerosis can often lead to fatal clot formation and blood vessel occlusion - also known as atherothrombosis. A key component to the development of atherosclerosis and atherothrombosis is the endothelium and its ability to regulate the balance between prothrombotic and antithrombotic activities. Endothelial surface glycocalyx has a critical role in maintenance of vascular integrity. The endothelial glycocalyx, nitric oxide, prostacyclins, heparan sulfate, thrombomodulin, and tissue factor pathway inhibitor all prevent thrombosis, while P-selectin, among many other factors, favors thrombosis. However, endothelial dysfunction gives rise to the acceleration of thrombotic development and eventually the requirement of antithrombotic therapy. Most FDA-approved anticoagulant and antiplatelet therapies today carry a side effect profile of major bleed. Within the past five years, several preclinical studies using different endothelial targets and nanotechnology as a drug delivery method have emerged to target the endothelium and to enhance current antithrombosis without increasing bleed risk. While clinical studies are required, this review illustrates the proof-of-concept of nanotechnology in promoting a greater safety and efficacy profile through multiple in vitro and in vivo studies.

Effects of Coupled-/soluble-Copper, Generating from Copper-doped Titanium Dioxide Nanotubes on Cell Response

BACKGROUND

Endothelialization in vitro is a very common method for surface modification of cardiovascular materials. However, mature endothelial cells are not suitable because of the difficulty in obtaining and immunogenicity.

METHODS

In this patent work, we determined the appropriate amount of copper by constructing a copper- loaded titanium dioxide nanotube array that can catalyze the release of nitric oxide, compared the effects of coupled-/soluble-copper on stem cells, and then induced stem cells to differentiate into endothelial cells.

RESULTS

The results showed that it had a strong promotion effect on the differentiation of stem cells into endothelial cells, which might be used for endothelialization in vitro.

CONCLUSION

SEM and EDS results prove that a high content of copper ions are indeed doped onto the surface of nanotubes with small amounts of Cu release. The release of NO confirms that the release of several samples within a period of time is within the physiological concentration.

Utility of NO and H2S donating platforms in managing COVID-19: Rationale and promise

Viral infections are a continuing global burden on the human population, underscored by the ramifications of the COVID-19 pandemic. Current treatment options and supportive therapies for many viral infections are relatively limited, indicating a need for alternative therapeutic approaches. Virus-induced damage occurs through direct infection of host cells and inflammation-related changes. Severe cases of certain viral infections, including COVID-19, can lead to a hyperinflammatory response termed cytokine storm, resulting in extensive endothelial damage, thrombosis, respiratory failure, and death. Therapies targeting these complications are crucial in addition to antiviral therapies. Nitric oxide and hydrogen sulfide are two endogenous gasotransmitters that have emerged as key signaling molecules with a broad range of antiviral actions in addition to having anti-inflammatory properties and protective functions in the vasculature and respiratory system. The enhancement of endogenous nitric oxide and hydrogen sulfide levels thus holds promise for managing both early-stage and later-stage viral infections, including SARS-CoV-2. Using SARS-CoV-2 as a model for similar viral infections, here we explore the current evidence regarding nitric oxide and hydrogen sulfide's use to limit viral infection, resolve inflammation, and reduce vascular and pulmonary damage.

Bio-inspired hemocompatible surface modifications for biomedical applications

When blood first encounters the artificial surface of a medical device, a complex series of biochemical reactions is triggered, potentially resulting in clinical complications such as embolism/occlusion, inflammation, or device failure. Preventing thrombus formation on the surface of blood-contacting devices is crucial for maintaining device functionality and patient safety. As the number of patients reliant on blood-contacting devices continues to grow, minimizing the risk associated with these devices is vital towards lowering healthcare-associated morbidity and mortality. The current standard clinical practice primarily requires the systemic administration of anticoagulants such as heparin, which can result in serious complications such as post-operative bleeding and heparin-induced thrombocytopenia (HIT). Due to these complications, the administration of antithrombotic agents remains one of the leading causes of clinical drug-related deaths. To reduce the side effects spurred by systemic anticoagulation, researchers have been inspired by the hemocompatibility exhibited by natural phenomena, and thus have begun developing medical-grade surfaces which aim to exhibit total hemocompatibility via biomimicry. This review paper aims to address different bio-inspired surface modifications that increase hemocompatibility, discuss the limitations of each method, and explore the future direction for hemocompatible surface research.

Recent Developments in Multifunctional Antimicrobial Surfaces and Applications toward Advanced Nitric Oxide-Based Biomaterials

Implant-associated infections arising from biofilm development are known to have detrimental effects with compromised quality of life for the patients, implying a progressing issue in healthcare. It has been a struggle for more than 50 years for the biomaterials field to achieve long-term success of medical implants by discouraging bacterial and protein adhesion without adversely affecting the surrounding tissue and cell functions. However, the rate of infections associated with medical devices is continuously escalating because of the intricate nature of bacterial biofilms, antibiotic resistance, and the lack of ability of monofunctional antibacterial materials to prevent the colonization of bacteria on the device surface. For this reason, many current strategies are focused on the development of novel antibacterial surfaces with dual antimicrobial functionality. These surfaces are based on the combination of two components into one system that can eradicate attached bacteria (antibiotics, peptides, nitric oxide, ammonium salts, light, etc.) and also resist or release adhesion of bacteria (hydrophilic polymers, zwitterionic, antiadhesive, topography, bioinspired surfaces, etc.). This review aims to outline the progress made in the field of biomedical engineering and biomaterials for the development of multifunctional antibacterial biomedical devices. Additionally, principles for material design and fabrication are highlighted using characteristic examples, with a special focus on combinational nitric oxide-releasing biomedical interfaces. A brief perspective on future research directions for engineering of dual-function antibacterial surfaces is also presented.

Smartphone compatible nitric oxide releasing insert to prevent catheter-associated infections

A large fraction of nosocomial infections is associated with medical devices that are deemed life-threatening in immunocompromised patients. Medical device-related infections are a result of bacterial colonization and biofilm formation on the device surface that affects >1 million people annually in the US alone. Over the past few years, light-based antimicrobial therapy has made substantial advances in tackling microbial colonization. Taking the advantage of light and antibacterial properties of nitric oxide (NO), for the first time, a robust, biocompatible, anti-infective approach to design a universal disposable catheter disinfection insert (DCDI) that can both prevent bacterial adhesion and disinfect indwelling catheters in situ is reported. The DCDI is engineered using a photo-initiated NO donor molecule, incorporated in polymer tubing that is mounted on a side glow fiber optic connected to an LED light source. Using a smartphone application, the NO release from DCDI is photoactivated via white light resulting in tunable physiological levels of NO for up to 24 h. When challenged with microorganisms S. aureus and E. coli, the NO-releasing DCDI statistically reduced microbial attachment by >99% versus the controls with just 4 h of exposure. The DCDI also eradicated ∼97% of pre-colonized bacteria on the CVC catheter model demonstrating the ability to exterminate an established catheter infection. The smart, mobile-operated novel universal antibacterial device can be used to both prevent catheter infections or can be inserted within an infected catheter to eradicate the bacteria without complex surgical interventions. The therapeutic levels of NO generated via illuminating fiber optics can be the next-generation biocompatible solution for catheter-related bloodstream infections.

In situ synthesis of ultrafine Cu2O on layered double hydroxide for electrochemical detection of S-nitrosothiols

The identification and quantitation of S-nitrosothiols (RSNO) has aroused enormous levels of attention, due to RSNO have many roles in vivo. Here, we synthesized the nanocomposites of ultrafine Cu₂O/layered double hydroxide (u-Cu₂O/LDH) by the in situ topotactic reduction of a Cu²⁺-containing LDH with ascorbic acid under gentle conditions and applied these u-Cu₂O/LDH to detect and monitor RSNO. Electrochemical signals of u-Cu₂O/LDH exhibited a wide N-acetyl-S-nitrosopenicillamine detection range from 5.0 nM-4.0 μM and 4.0 μM-400 μM, with a low detection limit of 1.58 nM. The sensor also exhibited good performance for other RSNO, such as S-nitrosoglutathione, S-nitrosocysteine, and S-nitrosohomocysteine with corresponding limits of detection at 1.94 nM, 1.23 nM and 1.62 nM, respectively. The high levels of selectivity and sensitivity to RSNO in complex biological environments can be attributed to the abundance of exposed active sites, and the underlying support structure. In addition, u-Cu₂O/LDH also exhibited dynamic nitric oxide (NO) monitoring ability from living cells. Collectively, these results reveal that u-Cu₂O/LDH exhibit a remarkable ability to quantify RSNO levels in complex samples, and could therefore provide new tools for exploring ultrafine nanomaterials as a potential biosensor to investigate biological events.

Long-Term Storage Stability and Nitric Oxide Release Behavior of (N-Acetyl-S-nitrosopenicillaminyl)-S-nitrosopenicillamine-Incorporated Silicone Rubber Coatings

Physical incorporation of nitric oxide (NO) releasing materials in biomedical grade polymer matrices to fabricate antimicrobial coatings and devices is an economically viable process. However, achieving long-term NO release with a minimum or no leaching of the NO donor from the polymer matrix is still a challenging task. Herein, (N-acetyl-S-nitrosopenicillaminyl)-S-nitrosopenicillamine (SNAP-SNAP), a penicillamine dipeptide NO-releasing molecule, is incorporated into a commercially available biomedical grade silicone rubber (SR) to fabricate a NO-releasing coating (SNAP-SNAP/SR). The storage stabilities of the SNAP-SNAP powder and SNAP-SNAP/SR coating were analyzed at different temperatures. The SNAP-SNAP/SR coatings with varying wt % of SNAP-SNAP showed a tunable and sustained NO release for up to 6 weeks. Further, S-nitroso-N-acetylpenicillamine (SNAP), a well-explored NO-releasing molecule, was incorporated into a biomedical grade silicone polymer to fabricate a NO-releasing coating (SNAP/SR) and a comparative analysis of the NO release and S-nitrosothiol (RSNO) leaching behavior of 10 wt % SNAP-SNAP/SR and 10 wt % SNAP/SR was studied. Interestingly, the 10 wt % SNAP-SNAP/SR coatings exhibited ∼36% higher NO release and 4 times less leaching of NO donors than the 10 wt % SNAP/SR coatings. Further, the 10 wt % SNAP-SNAP/SR coatings exhibited promising antibacterial properties against Staphylococcus aureus and Escherichia coli due to the persistent release of NO. The 10 wt % SNAP-SNAP/SR coatings were also found to be biocompatible against NIH 3T3 mouse fibroblast cells. These results corroborate the sustained stability and NO-releasing properties of the SNAP-SNAP in a silicone polymer matrix and demonstrate the potential for the SNAP-SNAP/SR polymer in the fabrication of long-term indwelling biomedical devices and implants to enhance biocompatibility and resist device-related infections.

Nitric Oxide-Releasing Nanofibrous Scaffolds Based on Silk Fibroin and Zein with Enhanced Biodegradability and Antibacterial Properties

Clinical applications of scaffolds and implants have been associated with bacterial infection resulting in impaired tissue regeneration. Nanofibers provide a versatile structure for both antimicrobial molecule delivery and tissue engineering. In this study, the nitric oxide (NO) donor molecule S-nitrosoglutathione (GSNO) and the natural biodegradable polymer zein (ZN) were combined with silk fibroin (SF) to develop antibacterial and biodegradable nanofibrous scaffolds for tissue engineering applications. The compatibility and intermolecular interactions of SF and ZN were studied using differential scanning calorimetry and Fourier transform infrared spectroscopy. The incorporation of ZN increased the hydrophobicity of the fibers and resulted in a more controlled and prolonged NO release profile lasting for 48 h. Moreover, the degradation kinetics of the fibers was significantly improved after blending with ZN. The results of tensile testing indicated that the addition of ZN and GSNO had a positive effect on the strength and stretchability of SF fibers and did not adversely affect their mechanical properties. Finally, due to the antibacterial properties of both NO and ZN, the SF-ZN-GSNO fibers showed a synergistically high antibacterial efficacy with 91.6 ± 2.5% and 77.5 ± 3.1% reduction in viability of adhered Staphylococcus aureus and Escherichia coli after 24 h exposure, respectively. The developed NO-releasing fibers were not only antibacterial but also non-cytotoxic and successfully enhanced the proliferation and growth of fibroblast cells, which was quantitatively studied by a CCK-8 assay and visually observed through fluorescent staining. Overall, SF-ZN-GSNO fibers developed in this study were biodegradable and highly antibacterial and showed great cytocompatibility with fibroblasts, indicating their promising potential for a range of tissue engineering and medical device applications.

Versatile metal-organic frameworks as a catalyst and an indicator of nitric oxide

The imaging of nitric oxide (NO) and its donors is crucial to explore NO-related physiological and pathological processes. In this work, we demonstrate the use of Cu-based metal-organic frameworks (Cu-MOFs) as nanoprobes for NO detection and as a catalyst for the generation of NO from the biologically occurring substrate, S-nitrosothiols (RSNOs). The paramagnetic Cu²⁺ in the MOFs could quench the luminescence of triphenylamine; Cu-MOFs only exhibited weak emission at 450 nm. Upon the addition of NO, the paramagnetic Cu²⁺ was reduced to diamagnetic Cu⁺, and thus the luminescence was recovered directly. Cu-MOFs exhibited high selectivity for other species in the reaction system, including NO₂^-, H₂O₂, AA, NO₃^- and ¹O₂. More significantly, the Cu⁺ can react with s-nitrosoglutathione (GSNO), s-nitrosocysteine (CysNO), and s-nitrosocysteamine (CysamNO) to generate NO and then oxidize to Cu²⁺-MOFs with quenched luminescence, respectively, and thus the catalysis is inhibited, noted as a self-controlled process. The Cu-MOFs catalyst was confirmed by powder X-ray diffraction to remain structurally intact in aqueous environments. The Cu-MOFs have been successfully employed in the biological imaging of NO in living cells. The bifunctional MOFs could offer a novel platform for the real-time monitoring of NO species, provide potential for exploiting NO in cancer therapy and improve the methodologies to elucidate the NO-related biological processes.

Nitric Oxide Delivering Surfaces: An Overview of Functionalization Strategies and Efficiency Progress

An overview on the design of nitric oxide (NO) delivering surfaces for biomedical purposes is provided, with a focus on the advances of the past 5 years. A localized supply of NO is of a particular interest due to the pleiotropic biological effects of this diatomic compound. Depending on the generated NO flux, the surface can mimic a physiological release profile to provide an activity on the vascular endothelium or an antibacterial activity. Three requirements are considered to describe the various strategies leading to a surface delivering NO. Firstly, the coating must be selected in accordance with the properties of the substrate (nature, shape, dimensions…). Secondly, the releasing and/or generating kinetics of NO should match the targeted biological application. Currently, the most promising structures are developed to provide an adaptable NO supply driven by pathophysiological needs. Finally, the biocompatibility and the stability of the surface must also be considered regarding the expected residence time of the device. A critical point of view is proposed to help readers in the design of the NO delivering surface according to its expected requirement and therapeutic purpose.

Bioinspired ultra-low fouling coatings on medical devices to prevent device-associated infections and thrombosis

Addressing thrombosis and biofouling of indwelling medical devices within healthcare institutions is an ongoing problem. In this work, two types of ultra-low fouling surfaces (i.e., superhydrophobic and lubricant-infused slippery surfaces) were fabricated to enhance the biocompatibility of commercial medical grade silicone rubber (SR) tubes that are widely used in clinical care. The superhydrophobic (SH) coatings on the tubing substrates were successfully created by dip-coating in superhydrophobic paints consisting of polydimethylsiloxane (PDMS), perfluorosilane-coated hydrophobic zinc oxide (ZnO) and copper (Cu) nanoparticles (NPs) in tetrahydrofuran (THF). The SH surfaces were converted to lubricant-infused slippery (LIS) surfaces through the infusion of silicone oil. The anti-biofouling properties of the coatings were investigated by adsorption of platelets, whole blood coagulation, and biofilm formation in vitro. The results revealed that the LIS tubes possess superior resistance to clot formation and platelet adhesion than uncoated and SH tubes. In addition, bacterial adhesion was investigated over 7 days in a drip-flow bioreactor, where the SH-ZnO-Cu tube and its slippery counterpart significantly reduced bacterial adhesion and biofilm formation of Escherichia coli relative to control tubes (>5 log10 and >3 log10 reduction, respectively). The coatings also demonstrated good compatibility with fibroblast cells. Therefore, the proposed coatings may find potential applications in high-efficiency on-demand prevention of biofilm and thrombosis formation on medical devices to improve their biocompatibility and reduce the risk of complications from medical devices.

SMA-BmobaSNO: an intelligent photoresponsive nitric oxide releasing polymer for drug nanoencapsulation and targeted delivery

Nitric oxide (NO) is an important biological signalling molecule that acts to vasodilate blood vessels and change the permeability of the blood vessel wall. Due to these cardiovascular actions, co-administering NO with a therapeutic could enhance drug uptake. However current NO donors are not suitable for targeted drug delivery as they systemically release NO. To overcome this limitation we report the development of a smart polymer, SMA-BmobaSNO, designed to release NO in response to a photostimulus. The polymer's NO releasing functionality is an S-nitrosothiol group that, at 10 mg ml^-1, is highly resistant to both thermal (t_1/216 d) and metabolic (t_1/232 h) decomposition, but rapidly brakes down under photoactivation (2700 W m^-2, halogen source) to release NO (t_1/225 min). Photoresponsive NO release from SMA-BmobaSNO was confirmed in a cardiovascular preparation, where irradiation resulted in a 12-fold decrease in vasorelaxation EC₅₀(from 5.2μM to 420 nM). To demonstrate the polymer's utility for drug delivery we then used SMA-BmobaSNO to fabricate a nanoparticle containing the probe Nile Red (NR). The resulting SMA-BmobaSNO-NR nanoparticle exhibited spherical morphology (180 nm diameter) and sustained NR release (≈20% over 5 d). Targeted delivery was characterised in an abdominal preparation, where photoactivation (450 W m^-2) caused localized increases in vasodilation and blood vessel permeability, resulting in a 3-fold increase in NR uptake into photoactivated tissue. Nanoparticles fabricated from SMA-BmobaSNO therefore display highly photoresponsive NO release and can apply the Trojan Horse paradigm by using endogenous NO signalling pathways to smuggle a therapeutic cargo into target tissue.

Nitric oxide-releasing polyurethane/S-nitrosated keratin mats for accelerating wound healing

Nitric oxide (NO) plays an important role in wound healing, due to its ability to contract wound surfaces, dilate blood vessels, participate in inflammation as well as promote collagen synthesis, angiogenesis and fibroblast proliferation. Herein, keratin was first nitrosated to afford S-nitrosated keratin (KSNO). As a NO donor, KSNO was then co-electrospun with polyurethane (PU). These as-spun PU/KSNO biocomposite mats could release NO sustainably for 72 h, matching the renewal time of the wound dressing. Moreover, these mats exhibited excellent cytocompatibility with good cell adhesion and cell migration. Further, the biocomposite mats exhibited antibacterial properties without inducing severe inflammatory responses. The wound repair in vivo demonstrated that these mats accelerated wound healing by promoting tissue formation, collagen deposition, cell migration, re-epithelialization and angiogenesis. Overall, PU/KSNO mats may be promising candidates for wound dressing.

Ex vivo evaluation of blood coagulation on endothelial glycocalyx-inspired surfaces using thromboelastography

Purpose

Present blood-contacting materials have not yet demonstrated to be effective in reducing blood coagulation without causing additional side effects clinically. We have developed an endothelial glycocalyx-inspired biomimetic surface that combines nanotopography, heparin presentation, and nitric oxide (NO)-releasing features. The resulting modified surfaces have already shown promise in reducing unfavorable blood-material interactions using platelet-rich plasma. In this study, the efficacy of modified surfaces for reducing coagulation of human whole blood was measured. In addition, the effects of leached polysaccharides and chemical modification of the modified surfaces were evaluated.

Methods

Leached polysaccharides in the incubation solution were detected by a refractive index method to determine the potential influences of these modified surfaces on the blood coagulation observation. Chemical modifications by the nitrosation process on the polysaccharides in the modified surfaces were detected using attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). Clot formation parameters were measured using thromboelastography (TEG), a clinically relevant technique to evaluate whole blood coagulation.

Results

No polysaccharides were detected in the heparinized polyelectrolyte multilayer-coated titania nanotube array surface (TiO2NT + PEM) incubation solution; however, polysaccharides were detected from NO-releasing TiO2NT + PEM surface (TiO2NT + PEM + NO) incubation solution both after the nitrosation process and after all NO was released. The structures of thiolated chitosan and heparin were altered by t-butyl nitrite. All heparin-containing surfaces were shown to slow or inhibit clot formation.

Conclusion

This study is the first to evaluate these endothelial glycocalyx-inspired surfaces using clinically relevant parameters, as well as proposing potential influences of these modified surfaces on the inhibition of clot formation.

Supplementary Information

The online version contains supplementary material available at 10.1007/s44164-021-00001-w.

The Biologically Relevant Coordination Chemistry of Iron and Nitric Oxide: Electronic Structure and Reactivity

Nitric oxide (NO) is an important signaling molecule that is involved in a wide range of physiological and pathological events in biology. Metal coordination chemistry, especially with iron, is at the heart of many biological transformations involving NO. A series of heme proteins, nitric oxide synthases (NOS), soluble guanylate cyclase (sGC), and nitrophorins, are responsible for the biosynthesis, sensing, and transport of NO. Alternatively, NO can be generated from nitrite by heme- and copper-containing nitrite reductases (NIRs). The NO-bearing small molecules such as nitrosothiols and dinitrosyl iron complexes (DNICs) can serve as an alternative vehicle for NO storage and transport. Once NO is formed, the rich reaction chemistry of NO leads to a wide variety of biological activities including reduction of NO by heme or non-heme iron-containing NO reductases and protein post-translational modifications by DNICs. Much of our understanding of the reactivity of metal sites in biology with NO and the mechanisms of these transformations has come from the elucidation of the geometric and electronic structures and chemical reactivity of synthetic model systems, in synergy with biochemical and biophysical studies on the relevant proteins themselves. This review focuses on recent advancements from studies on proteins and model complexes that not only have improved our understanding of the biological roles of NO but also have provided foundations for biomedical research and for bio-inspired catalyst design in energy science.

Nitric Oxide-Releasing Gelatin Methacryloyl/Silk Fibroin Interpenetrating Polymer Network Hydrogels for Tissue Engineering Applications

Bacterial infection is one of the principal reasons for the failure of tissue engineering scaffolds. Therefore, the development of multifunctional scaffolds that not only are able to guide tissue regeneration but also can inhibit bacterial colonization is of great importance for tissue engineering applications. In this study, a highly antibacterial, biocompatible, and biodegradable scaffold based on silk fibroin (SF) and gelatin methacryloyl (GelMA) was prepared. Sequential cross-linking of GelMA and SF under UV irradiation and methanol treatment, respectively, resulted in the formation of interpenetrating network (IPN) hydrogels with a porous structure. In addition, impregnation of the hydrogels with a nitric oxide (NO) donor molecule, S-nitroso-N-acetylpenicillamine (SNAP), led to the development of NO-releasing scaffolds with strong antibacterial properties. According to the obtained results, the addition of SF to GelMA hydrogels caused an enhancement in the mechanical properties and NO release kinetics and prevented their rapid enzymatic degradation in aqueous media. Furthermore, swelling the GelMA-SF scaffolds with SNAP resulted in a bacteria reduction efficiency of >99.9% against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. The scaffolds also showed great cytocompatibility in vitro by increasing the proliferation and supporting the adhesion of 3T3 mouse fibroblast cells. Overall, GelMA-SF-SNAP showed great promise to be used as a scaffold for tissue engineering and wound healing applications.

Surface-Catalyzed Nitric Oxide Release via a Metal Organic Framework Enhances Antibacterial Surface Effects

It has been previously demonstrated that metal nanoparticles embedded into polymeric materials doped with nitric oxide (NO) donor compounds can accelerate the release rate of NO for therapeutic applications. Despite the advantages of elevated NO surface flux for eradicating opportunistic bacteria in the initial hours of application, metal nanoparticles can often trigger a secondary biocidal effect through leaching that can lead to unfavorable cytotoxic responses from host cells. Alternatively, copper-based metal organic frameworks (MOFs) have been shown to stabilize Cu2+/1+ via coordination while demonstrating longer-term catalytic performance compared to their salt counterparts. Herein, the practical application of MOFs in NO-releasing polymeric substrates with an embedded NO donor compound was investigated for the first time. By developing composite thermoplastic silicon polycarbonate polyurethane (TSPCU) scaffolds, the catalytic effects achievable via intrapolymeric interactions between an MOF and NO donor compound were investigated using the water-stable copper-based MOF H3[(Cu4Cl)3(BTTri)8-(H2O)12]·72H2O (CuBTTri) and the NO donor S-nitroso-N-acetyl-penicillamine (SNAP). By creating a multifunctional triple-layered composite scaffold with CuBTTri and SNAP, the surface flux of NO from catalyzed SNAP decomposition was found tunable based on the variable weight percent CuBTTri incorporation. The tunable NO surface fluxes were found to elicit different cytotoxic responses in human cell lines, enabling application-specific tailoring. Challenging the TSPCU-NO-MOF composites against 24 h bacterial growth models, the enhanced NO release was found to elicit over 99% reduction in adhered and over 95% reduction in planktonic methicillin-resistant Staphylococcus aureus, with similar results observed for Escherichia coli. These results indicate that the combination of embedded MOFs and NO donors can be used as a highly efficacious tool for the early prevention of biofilm formation on medical devices.

Reduction in Foreign Body Response and Improved Antimicrobial Efficacy via Silicone-Oil-Infused Nitric-Oxide-Releasing Medical-Grade Cannulas

Foreign body response and infection are two universal complications that occur with indwelling medical devices. In response, researchers have developed different antimicrobial and antifouling surface strategies to minimize bacterial colonization and fibrous encapsulation. In this study, the nitric oxide (NO) donor S-nitroso-N-acetylpenicillamine (SNAP) and silicone oil were impregnated into silicone rubber cannulas (SR-SNAP-Si) using a solvent swelling method to improve the antimicrobial properties and decrease the foreign body response. The fabricated SR-SNAP-Si cannulas demonstrated a stable, prolonged NO release, exhibited minimal SNAP leaching, and maintained sliding angles < 15° for 21 days. SR-SNAP-Si cannulas displayed enhanced antimicrobial efficacy against Staphylococcus aureus in a 7-day biofilm bioreactor study, reducing the viability of adhered bacteria by 99.2 ± 0.2% compared to unmodified cannulas while remaining noncytotoxic toward human fibroblast cells. Finally, SR-SNAP-Si cannulas were evaluated for the first time in a 14- and 21-day subcutaneous mouse model, showing significantly enhanced biocompatibility compared to control cannulas by reducing the thickness of fibrous encapsulation by 60.9 ± 6.1 and a 60.8 ± 10.5% reduction in cell density around the implant site after 3 weeks. Thus, this work demonstrates that antifouling, NO-releasing surfaces can improve the lifetime and safety of indwelling medical devices.

Delivery of Nitric Oxide in the Cardiovascular System: Implications for Clinical Diagnosis and Therapy

Nitric oxide (NO) is a key molecule in cardiovascular homeostasis and its abnormal delivery is highly associated with the occurrence and development of cardiovascular disease (CVD). The assessment and manipulation of NO delivery is crucial to the diagnosis and therapy of CVD, such as endothelial dysfunction, atherosclerotic progression, pulmonary hypertension, and cardiovascular manifestations of coronavirus (COVID-19). However, due to the low concentration and fast reaction characteristics of NO in the cardiovascular system, clinical applications centered on NO delivery are challenging. In this tutorial review, we first summarized the methods to estimate the in vivo NO delivery process, based on computational modeling and flow-mediated dilation, to assess endothelial function and vulnerability of atherosclerotic plaque. Then, emerging bioimaging technologies that have the potential to experimentally measure arterial NO concentration were discussed, including Raman spectroscopy and electrochemical sensors. In addition to diagnostic methods, therapies aimed at controlling NO delivery to regulate CVD were reviewed, including the NO release platform to treat endothelial dysfunction and atherosclerosis and inhaled NO therapy to treat pulmonary hypertension and COVID-19. Two potential methods to improve the effectiveness of existing NO therapy were also discussed, including the combination of NO release platform and computational modeling, and stem cell therapy, which currently remains at the laboratory stage but has clinical potential for the treatment of CVD.

Red-Light-Mediated Photoredox Catalysis Enables Self-Reporting Nitric Oxide Release for Efficient Antibacterial Treatment

Nitric oxide (NO) serves as a key regulator of many physiological processes and as a potent therapeutic agent. The local delivery of NO is important to achieve target therapeutic outcomes due to the toxicity of NO at high concentrations. Although light stimulus represents a non-invasive tool with spatiotemporal precision to mediate NO release, many photoresponsive NO-releasing molecules can only respond to ultraviolet (UV) or near-UV visible light with low penetration and high phototoxicity. We report that coumarin-based NO donors with maximal absorbances at 328 nm can be activated under (deep) red-light (630 or 700 nm) irradiation in the presence of palladium(II) tetraphenyltetrabenzoporphyrin, enabling stoichiometric and self-reporting NO release with a photolysis quantum yield of 8 % via photoredox catalysis. This NO-releasing platform with ciprofloxacin loading can eradicate Pseudomonas aeruginosa biofilm in vitro and treat cutaneous abscesses in vivo.

Polydopamine/poly(sulfobetaine methacrylate) Co-deposition coatings triggered by CuSO4/H2O2 on implants for improved surface hemocompatibility and antibacterial activity

Implanted biomaterials such as medical catheters are prone to be adhered by proteins, platelets and bacteria due to their surface hydrophobicity characteristics, and then induce related infections and thrombosis. Hence, the development of a versatile strategy to endow surfaces with antibacterial and antifouling functions is particularly significant for blood-contacting materials. In this work, CuSO4/H2O2 was used to trigger polydopamine (PDA) and poly-(sulfobetaine methacrylate) (PSBMA) co-deposition process to endow polyurethane (PU) antibacterial and antifouling surface (PU/PDA(Cu)/PSBMA). The zwitterions contained in the PU/PDA(Cu)/PSBMA coating can significantly improve surface wettability to reduce protein adsorption, thereby improving its blood compatibility. In addition, the copper ions released from the metal-phenolic networks (MPNs) imparted them more than 90% antibacterial activity against E. coli and S. aureus. Notably, PU/PDA(Cu)/PSBMA also exhibits excellent performance in vivo mouse catheter-related infections models. Thus, the PU/PDA(Cu)/PSBMA has great application potential for developing multifunctional surface coatings for blood-contacting materials so as to improve antibacterial and anticoagulant properties.

Nitric oxide releasing halloysite nanotubes for biomedical applications

Halloysite nanotubes (HNTs) are natural aluminosilicate clay that have been extensivelyexplored fordelivery of bioactive agents in biomedical applications because of their desirable features including unique hollow tubular structure, good biocompatibility, high mechanical strength, and extensive functionality. For the first time, in this work, functionalized HNTs are developed as a delivery platform for nitric oxide (NO), a gaseous molecule, known for its important roles in the regulation of various physiological processes. HNTs were first hydroxylated and modified with an aminosilane crosslinker, (3-aminopropyl) trimethoxysilane (APTMS), to enable the covalent attachment of a NO donor precursor, N-acetyl-d-penicillamine (NAP). HNT-NAP particles were then converted to NO-releasing S-nitroso-N-acetyl-penicillamine HNT-SNAP by nitrosation. The total NO loading on the resulting nanotubes was 0.10 ± 0.07 μmol/mg which could be released using different stimuli such as heat and light. Qualitative (Fourier-transform infrared spectroscopy and Nuclear magnetic resonance) and quantitative (Ninhydrin and Ellman) analyses were performed to confirm successful functionalization of HNTs at each step. Field emission scanning electron microscopy (FE-SEM) showed that the hollow tubular morphology of the HNTs was preserved after modification. HNT-SNAP showed concentration-dependent antibacterial effects against Gram-positive Staphylococcus aureus (S. aureus), resulting in up to 99.6% killing efficiency at a concentration of 10 mg/mL as compared to the control. Moreover, no significant cytotoxicity toward 3T3 mouse fibroblast cells was observed at concentrations equal or below 2 mg/mL of HNT-SNAP according to a WST-8-based cytotoxicity assay. The SNAP-functionalized HNTs represent a novel and efficient NO delivery system that holds the potential to be used, either alone or in combination with polymers for different biomedical applications.

Development of Novel Amphotericin B-Immobilized Nitric Oxide-Releasing Platform for the Prevention of Broad-Spectrum Infections and Thrombosis

Indwelling medical devices currently used to diagnose, monitor, and treat patients invariably suffer from two common clinical complications: broad-spectrum infections and device-induced thrombosis. Currently, infections are managed through antibiotic or antifungal treatment, but the emergence of antibiotic resistance, the formation of recalcitrant biofilms, and difficulty identifying culprit pathogens have made treatment increasingly challenging. Additionally, systemic anticoagulation has been used to manage device-induced thrombosis, but subsequent life-threatening bleeding events associated with all available therapies necessitates alternative solutions. In this study, a broad-spectrum antimicrobial, antithrombotic surface combining the incorporation of the nitric oxide (NO) donor S-nitroso-N-acetylpenicillamine (SNAP) with the immobilization of the antifungal Amphotericin B (AmB) on polydimethylsiloxane (PDMS) was developed in a two-step process. This novel strategy combines the key advantages of NO, a bactericidal agent and platelet inhibitor, with AmB, a potent antifungal agent. We demonstrated that SNAP-AmB surfaces significantly reduced the viability of adhered Staphylococcus aureus (99.0 ± 0.2%), Escherichia coli (89.7 ± 1.0%), and Candida albicans (93.5 ± 4.2%) compared to controls after 24 h of in vitro exposure. Moreover, SNAP-AmB surfaces reduced the number of platelets adhered by 74.6 ± 3.9% compared to controls after 2 h of in vitro porcine plasma exposure. Finally, a cytotoxicity assay validated that the materials did not present any cytotoxic side effects toward human fibroblast cells. This novel approach is the first to combine antifungal surface functionalization with NO-releasing technology, providing a promising step toward reducing the rate of broad-spectrum infection and thrombosis associated with indwelling medical devices.

Electrochemically deposition of catechol-chitosan hydrogel coating on coronary stent with robust copper ions immobilization capability and improved interfacial biological activity

Establishing a facile and versatile strategy to confer coronary stent with improved interfacial biological activity is crucial for novel cardiovascular implants. Developing a coating with NO release ability catalyzed by metal ions, such as copper, will be highly advantageous for the functionalized surface modification of metal stents. However, most available strategies involve drawbacks of low efficiency, complex processes, and toxic chemicals. Therefore, in this study, we report a green and facile electrobiofabrication method to construct the bioactive hydrogel coating by combining chitosan, catechol groups and copper ions on coronary stent and titanium surfaces. Experimental results demonstrated that the chitosan hydrogel coating can be precisely controlled synthesis via electrochemical deposition and serves as a versatile platform for copper ions immobilization. Additionally, mussel-inspired catechol groups could be chemically grafted on chitosan chains to further enhance the film mechanical properties and binding abilities of copper ions. Moreover, in vitro cell biocompatibility and catalyzed NO-generation activity have also been accessed and which suggesting great possibilities for biomedical applications. Therefore, by coupling the electrobiofabrication approach and multi-functionalities of the hybrid film, this report would advance the development of biomimetic hydrogel coating for vascular engineering (e.g., coronary stent) and other biomedical devices.

Highly hydrophobic polytetrafluoroethylene particle immobilization via polydopamine anchor layer on nitric oxide releasing polymer for biomedical applications

Biomedical surface-associated infections and thrombus formation are two major clinical issues that challenge patient safety and patient the fate of a medical device in the body . Single platform multifunctional surfaces are critical to address both these indwelling medical device-related problems. In this work, bio-inspired approaches are employed to fabricate a polymer composite with a versatile surface that can reduce bacterial infections and platelet adhesion in vitro. In the first bio-inspired approach, the functionality of nitric oxide (NO) produced by endothelial cell lining of blood vessels is mimicked through incorporation of S-nitroso-N-acetylpenicillamine (SNAP) within a CarboSil-2080A™ (CarboSil) polymer composite matrix. The second approach involves utilizing mussel adhesive chemistry, via polydopamine (PDA) to immobilize polytetrafluoroethylene (PTFE) particles on the polymer composite surface. The PTFE coating facilitates a decrease in wettability by making the polymer composite surface highly hydrophobic (contact angle ca. 120°). The surface of the fabricated polymer composite , CarboSil SNAP-PTFE, had a cobblestone-like structured appearance as characterized through scanning electron microscopy (SEM). Water contact angle (WCA) and surface tension measurements indicated no significant coating losses after 24 h under physiological conditions. NO surface flux was measured and analyzed for 5 days using a chemiluminescence-based nitric oxide analyzer and was found to be within the physiological range. CarboSil SNAP-PTFE reduced adhered bacteria (99.3 ± 0.5% for Gram-positive S. aureus and 99.1 ± 0.4% for Gram-negative E. coli) in a 24 h in vitro study. SEM analysis showed the absence of biofilm formation on CarboSil SNAP-PTFE polymer composites, while present on CarboSil in 24 h exposure to S. aureus. Platelet adhesion was reduced by 83.3 ± 4.5%. Overall, the results of this study suggest that a combination of NO-releasing CarboSil with PTFE coating can drastically reduce infection and platelet adhesion.

Antimicrobial Properties of the Ag, Cu Nanoparticle System

Microbes, including bacteria and fungi, easily form stable biofilms on many surfaces. Such biofilms have high resistance to antibiotics, and cause nosocomial and postoperative infections. The antimicrobial and antiviral behaviors of Ag and Cu nanoparticles (NPs) are well known, and possible mechanisms for their actions, such as released ions, reactive oxygen species (ROS), contact killing, the immunostimulatory effect, and others have been proposed. Ag and Cu NPs, and their derivative NPs, have different antimicrobial capacities and cytotoxicities. Factors, such as size, shape and surface treatment, influence their antimicrobial activities. The biomedical application of antimicrobial Ag and Cu NPs involves coating onto substrates, including textiles, polymers, ceramics, and metals. Because Ag and Cu are immiscible, synthetic AgCu nanoalloys have different microstructures, which impact their antimicrobial effects. When mixed, the combination of Ag and Cu NPs act synergistically, offering substantially enhanced antimicrobial behavior. However, when alloyed in Ag-Cu NPs, the antimicrobial behavior is even more enhanced. The reason for this enhancement is unclear. Here, we discuss these results and the possible behavior mechanisms that underlie them.

Nitric oxide (NO) and nanoparticles - Potential small tools for the war against COVID-19 and other human coronavirus infections

The endogenous free radical nitric oxide (NO) plays a pivotal role in the immunological system. NO has already been reported as a potential candidate for use in the treatment of human coronavirus infections, including COVID-19. In fact, inhaled NO has been used in clinical settings for its antiviral respiratory action, and in the regulation of blood pressure to avoid clot formation. In this mini-review, we discuss recent progress concerning the antivirus activity of NO in clinical, pre-clinical and research settings, and its beneficial effects in the treatment of clinical complications in patients infected with coronaviruses and other respiratory viral diseases, including COVID-19. We also highlight promising therapeutic effects of NO donors allied to nanomaterials to combat COVID-19 and other human coronavirus infections. Nanomaterials can be designed to deliver sustained, localized NO release directly at the desired application site, enhancing the beneficial effects of NO and minimizing the side effects. Challenges and perspectives are presented to open new fields of research.

S-Nitrosoglutathione-Based Nitric Oxide-Releasing Nanofibers Exhibit Dual Antimicrobial and Antithrombotic Activity for Biomedical Applications

The novel use of nanofibers as a physical barrier between blood and medical devices has allowed for modifiable, innovative surface coatings on devices ordinarily plagued by thrombosis, delayed healing, and chronic infection. In this study, the nitric oxide (NO) donor S-nitrosoglutathione (GSNO) is blended with the biodegradable polymers polyhydroxybutyrate (PHB) and polylactic acid (PLA) for the fabrication of hemocompatible, antibacterial nanofibers tailored for blood-contacting applications. Stress/strain behavior of different concentrations of PHB and PLA is recorded to optimize the mechanical properties of the nanofibers. Nanofibers incorporated with different concentrations of GSNO (10, 15, 20 wt%) are evaluated based on their NO-releasing kinetics. PLA/PHB + 20 wt% GSNO nanofibers display the greatest NO release over 72 h (0.4-1.5 × 10-10  mol mg-1 min-1 ). NO-releasing fibers successfully reduce viable adhered bacterial counts by ≈80% after 24 h of exposure to Staphylococcus aureus. NO-releasing nanofibers exposed to porcine plasma reduce platelet adhesion by 64.6% compared to control nanofibers. The nanofibers are found noncytotoxic (>95% viability) toward NIH/3T3 mouse fibroblasts, and 4',6-diamidino-2-phenylindole and phalloidin staining shows that fibroblasts cultured on NO-releasing fibers have improved cellular adhesion and functionality. Therefore, these novel NO-releasing nanofibers provide a safe antimicrobial and hemocompatible coating for blood-contacting medical devices.