Enzymatic Fuel Cell-Based Self-Powered Homogeneous Immunosensing Platform via Target-Induced Glucose Release: An Appealing Alternative Strategy for Turn-On Melamine Assay

Nanolabels Prepared by the Entrapment or Self-Assembly of Signaling Molecules for Colorimetric and Fluorescent Immunoassays

Nanomaterials have attracted significant attention as signal reporters for immunoassays. They can directly generate detectable signals or release a large number of signaling elements for readout. Among various nanolabels, nanomaterials composed of multiple signaling molecules have shown great potential in immunoassays. Generally, signaling molecules can be entrapped in nanocontainers or self-assemble into nanostructures for signal amplification. In this review, we summarize the advances of signaling molecules-entrapped or assembled nanomaterials for colorimetric and fluorescence immunoassays. The nanocontainers cover liposomes, polymers, mesoporous silica, metal-organic frameworks (MOFs), various nanosheets, nanoflowers or nanocages, etc. Signaling molecules mainly refer to visible and/or fluorescent organic dyes. The design and application of immunoassays are emphasized from the perspective of nanocontainers, analytes, and analytical performances. In addition, the future challenges and research trends for the preparation of signaling molecules-entrapped or assembled nanolabels are briefly discussed.

CRISPR/Cas12a-triggered ordered concatemeric DNA probes signal-on/off multifunctional analytical sensing system for ultrasensitive detection of thalassemia

Based on CRISPR/Cas12a triggered ordered concatemeric DNA probes, a "on/off" self-powered biosensor is developed to achieve highly sensitive detection of thalassemia gene CD142 through open-circuit potential-assisted visual signal output. The ingeniously constructed glucose oxidase (GOD)-functionalized ordered concatemeric DNA probe structure can significantly amplify signal output, while the coupled CRISPR/Cas12a system is served as a "signal switch" with excellent signal-transducing capabilities. When the ordered concatemeric DNA probe structure is anchored on electrode, the response signal of the sensing system is in the "signal on" mode. While, the presence of the target activates the non-specific cleavage activity of the CRISPR/Cas12a system, causing the sensing system to switch to the "signal off" mode. In the detection system, GOD catalyzes the oxidation of glucose to produce hydrogen peroxide, which further catalyzes the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to form a color product, enabling visual signal of the target through naked-eye color contrast. By employing a multifunctional analytical mode combining electrochemical and visual signal outputs, accurate determination of the target is achieved, with linear ranges of 0.0001-100 pM, and detection limits of 48.1 aM (S/N = 3). This work provides a reference method for sensitive detection of thalassemia genes and holds great diagnostic potential in biomedical applications.

Biofuel cell-based self-powered immunosensor for detection of 17β-estradiol by integrating the target-induced biofuel release and biogate immunoassay

A novel biofuel cell (BFC)-based self-powered electrochemical immunosensing platform was developed by integrating the target-induced biofuel release and biogate immunoassay for ultrasensitive 17β-estradiol (E2) detection. The carbon nanocages/gold nanoparticle composite was employed in the BFCs device as the electrode material, through which bilirubin oxidase and glucose oxidase were wired to form the biocathode and bioanode, respectively. Positively charged mesoporous silica nanoparticles (PMSN) were encapsulated with glucose molecules as biofuel and subsequently coated by the negatively charged AuNPs-labelled anti-E2 antibody (AuNPs-Ab) serving as a biogate. The biogate could be opened efficiently and the trapped glucose released once the target E2 was recognized and captured by AuNPs-Ab due to the decreased adhesion between the antigen-antibody complex and PMSN. Then, glucose oxidase oxidized the glucose to produce a large number of electrons, resulting in significantly increased open-circuit voltage (EOCV). Promisingly, the proposed BFC-based self-powered immunosensor demonstrated exceptional sensitivity for the detection of E2 in the concentration range from 1.0 pg mL-1 to 10.0 ng mL -1, with a detection limit of 0.32 pg mL-1 (S/N = 3). Furthermore, the prepared BFC-based self-powered homogeneous immunosensor showed significant potential for implementation as a viable prototype for a mobile and an on-site bioassay system in food and environmental safety applications.

Distinguishable Magnetic Reporter Coordination with Buoyancy-Magnetism Separation for Immobilization-Free Dual-Target Electrochemical Immunosensing

Simultaneous sensitive and precise determination of multibiomarkers is of great significance for improving detection efficiency, reducing diagnosis and treatment expenses, and elevating survival rates. However, the development of simple and portable biosensors for simultaneous determination of multiplexed targets in biological fluids still faces challenges. Herein, a unique and versatile immobilization-free dual-target electrochemical biosensing platform, which combines distinguishable magnetic signal reporters with buoyancy-magnetism separation, was designed and constructed for simultaneous detection of carcinoembryonic (CEA) and α-fetoprotein (AFP) in intricate biological fluids. To construct such distinguishable magnetic signal reporters with signal transduction, amplification, and output, secondary antibodies of CEA and AFP were respectively functionalized on methylene blue (MB) and 6-(ferrocenyl)hexanethiol (FeC) modified Fe3O4@Au magnetic nanocomposites. Meanwhile, a multifunctional flotation probe with dual target recognition, capture, and isolation capability was prepared by conjugating primary antibodies (Ab1-CEA, Ab1-AFP) to hollow buoyant microspheres. The target antigens of CEA and AFP can trigger a flotation-mediated sandwich-type immunoreaction and capture a certain amount of the distinguishable magnetic signal reporter, which enables the conversion of the target CEA and AFP quantities to the signal of the potential-resolved MB and FeC. Thus, the MB and FeC currents of magnetically adsorbed distinguishable magnetic reporters can be used to determine the CEA and AFP targets simultaneously and precisely. Accordingly, the proposed strategy exhibited a delightful linear response for CEA and AFP in the range of 100 fg·mL-1-100 ng·mL-1 with detection limits of 33.34 and 17.02 fg·mL-1 (S/N = 3), respectively. Meanwhile, no significant nonspecific adsorption and cross-talk were observed. The biosensing platform has shown satisfactory performance in the determination of real clinical samples. More importantly, the proposed approach can be conveniently extended to universal detection just by simply substituting biorecognition events. Thus, this work opens up a new promising perspective for dual and even multiple targets and offers promising potential applications in clinical diagnosis.

A self-powered electrochemical aptasensor for the detection of 17β-estradiol based on carbon nanocages/gold nanoparticles and DNA bioconjugate mediated biofuel cells

17β-Estradiol (E2) is an important endogenous estrogen, which disturbs the endocrine system and poses a threat to human health because of its accumulation in the human body. Herein, a biofuel cell (BFC)-based self-powered electrochemical aptasensor was developed for E2 detection. Porous carbon nanocage/gold nanoparticle composite modified indium tin oxide (CNC/AuNP/ITO) and glucose oxidase modified CNC/AuNP/ITO were used as the biocathode and bioanode of BFCs, respectively. [Fe(CN)6]3- was selected as an electroactive probe, which was entrapped in the pores of positively charged magnetic Fe3O4 nanoparticles (PMNPs) and then capped with a negatively charged E2 aptamer to form a DNA bioconjugate. The presence of the target E2 triggered the entrapped [Fe(CN)6]3- probe release due to the removal of the aptamer via specific recognition, which resulted in the transfer of electrons produced by glucose oxidation at the bioanode to the biocathode and produced a high open-circuit voltage (EOCV). Consequently, a "signal-on" homogeneous self-powered aptasensor for E2 assay was realized. Promisingly, the BFC-based self-powered aptasensor has particularly high sensitivity for E2 detection in the concentration range of 0.5 pg mL-1 to 15 ng mL-1 with a detection limit of 0.16 pg mL-1 (S/N = 3). Therefore, the proposed BFC-based self-powered electrochemical aptasensor has great promise to be applied as a successful prototype of a portable and on-site bioassay in the field of environment monitoring and food safety.

Magnetically-assisted electrochemical immunoplatform for simultaneous detection of active and total prostate-specific antigen based on proteolytic reaction and sandwich affinity analysis

Simultaneous detection of active and inactive proteases is clinically meaningful for improving diagnostic specificity. In this work, we reported an electrochemical method for simultaneous immunoassays of active and total proteases. Magnetic beads (MBs) were used as the solid supports for immobilization of capture antibodies and enrichment of targets. For the detection of active protease, the proteolytic-reaction-based analysis was carried out by the generation of Cu2+-binding peptide, in which a label-free peptide was used as the proteolytic substrate. The redox potential of the resulting peptide-Cu2+ complex was intrinsically distinguished from that of free Cu2+, thus allowing the "signal-on" detection of active protease. For the immunoassay of total protease in a sandwich-like format, electroactive metal-organic frameworks (Cu-MOFs) were used as the signal tags. The captured Cu-MOFs could directly produce a well-defined electrochemical signal from the reduction of Cu2+ ions. The analytical performances of the immunoplatform were evaluated by determining the model analytes of free and total prostate-specific antigen (fPSA and tPSA) in buffer and serum. The detection limits were found to be 0.3 pM for fPSA and 2 pM for tPSA. This work proposed a new strategy for simultaneous detection of active and total proteases, which should be evaluable for clinical diagnosis and treatment of protease-relative diseases.

Advancements in Bio-inspired Self-Powered Wireless Sensors: Materials, Mechanisms, and Biomedical Applications

The rapid maturation of smart city ecosystems is intimately linked to advances in the Internet of Things (IoT) and self-powered sensing technologies. Central to this evolution are battery-less sensors that are critical for applications such as continuous health monitoring through blood metabolites and vital signs, the recognition of human activity for behavioral analysis, and the operational enhancement of humanoid robots. The focus on biosensors that exploit the human body for energy-spanning wearable, attachable, and implantable variants has intensified, driven by their broad applicability in areas from underwater exploration to biomedical assays and earthquake monitoring. The heart of these sensors lies in their diverse energy harvesting mechanisms, including biofuel cells, and piezoelectric, triboelectric, and pyroelectric nanogenerators. Notwithstanding the wealth of research, the literature still lacks a holistic review that integrates the design challenges and implementation intricacies of such sensors. Our review seeks to fill this gap by thoroughly evaluating energy harvesting strategies from both material and structural perspectives and assessing their roles in powering an array of sensors for myriad uses. This exploration offers a comprehensive outlook on the state of self-powered sensing devices, tackling the nuances of their deployment and highlighting their potential to revolutionize data gathering in autonomous systems. The intent of this review is to chart the current landscape and future prospects, providing a pivotal reference point for ongoing research and innovation in self-powered wireless sensing technologies.

Research Progress in Enzyme Biofuel Cells Modified Using Nanomaterials and Their Implementation as Self-Powered Sensors

Enzyme biofuel cells (EBFCs) can convert chemical or biochemical energy in fuel into electrical energy, and therefore have received widespread attention. EBFCs have advantages that traditional fuel cells cannot match, such as a wide range of fuel sources, environmental friendliness, and mild reaction conditions. At present, research on EBFCs mainly focuses on two aspects: one is the use of nanomaterials with excellent properties to construct high-performance EBFCs, and the other is self-powered sensors based on EBFCs. This article reviews the applied nanomaterials based on the working principle of EBFCs, analyzes the design ideas of self-powered sensors based on enzyme biofuel cells, and looks forward to their future research directions and application prospects. This article also points out the key properties of nanomaterials in EBFCs, such as electronic conductivity, biocompatibility, and catalytic activity. And the research on EBFCs is classified according to different research goals, such as improving battery efficiency, expanding the fuel range, and achieving self-powered sensors.

Glucose oxidation induced pH stimuli response controlled release electrochemiluminescence biosensor for ultrasensitive detection of CYFRA 21-1

Herein, a self on electrochemiluminescence (ECL) biosensor was constructed by pH stimuli response controlled release strategy, in which SiO2-PEI as the carrier, BSA/luminol-Ab2 as the encapsulated substance, gold nanoparticles (Au NPs) as the blocking cap, glucose as the inducer. In addition, CeO2-Au was used as catalyst, which generated more O2•- to increase the ECL signal. Under the action of voltage, the glucose was oxidized to gluconic acid, which induced the pH to decrease accordingly. Therefore, Au NPs were stimulated to fall from the surface of SiO2-PEI, releasing the BSA/luminol-Ab2 to realize self on mode. With such design, the constructed self on ECL biosensor owned an ultrasensitive detection capacity of CYFRA 21-1, showing an excellent linear relationship in the range of 0.001-100000 ng/L and 0.4 fg/mL low limit of detection (LOD). It provided an innovative idea for the biosensor construction to clinical detection of lung cancer.

Faraday cage-type self-powered immunosensor based on hybrid enzymatic biofuel cell

Self-powered immunosensors (SPIs) based on enzymatic biofuel cell (EBFC) have low sensitivity and poor stability due to the high impedance of the immune sandwich and the vulnerability of enzymes to environmental factors. Here, we applied the Faraday cage-type sensing mode on a hybrid biofuel cell (HBFC)-based SPI for the first time, which exhibited high sensitivity and stability. Cytokeratin 19 fragment (CYFRA 21-1) was used as a model analyte. Au nanoparticle-reduced graphene oxide (Au-rGO) composite was used as the supporting matrix for immunoprobe immobilized with detection antibody and glucose dehydrogenase (GDH), also the builder for Faraday cage structure on the bioanode in the presence of antigen. After the combination of immunoprobe, antigen, and the antibody on the bioanode, the Faraday cage was constructed in case the AuNP-rGO was applied as a conductive cage for electron transfer from GDH to the bioanode without passing through the poorly conductive protein. With the assistance of the Faraday cage structure, the impedance of the bioanode decreased significantly from 4000 to 300 Ω, representing a decline of over 90%. The sensitivity of the SPI, defined as the changes of open circuit voltage (OCV) per unit concentration of the CYFRA 21-1, was 68 mV [log (ng mL-1)]-1. In addition, Fe-N-C was used as an inorganic cathode material to replace enzyme for oxygen reduction reaction (ORR), which endowed the sensor with 4-week long-term stability. This work demonstrates a novel sensing platform with high sensitivity and stability, bringing the concept of hybrid biofuel cell-based self-powered sensor.

Progress in Electrochemical Immunosensors with Alkaline Phosphatase as the Signal Label

Electrochemical immunosensors have shown great potential in clinical diagnosis, food safety, environmental protection, and other fields. The feasible and innovative combination of enzyme catalysis and other signal-amplified elements has yielded exciting progress in the development of electrochemical immunosensors. Alkaline phosphatase (ALP) is one of the most popularly used enzyme reporters in bioassays. It has been widely utilized to design electrochemical immunosensors owing to its significant advantages (e.g., high catalytic activity, high turnover number, and excellent substrate specificity). In this work, we summarized the achievements of electrochemical immunosensors with ALP as the signal reporter. We mainly focused on detection principles and signal amplification strategies and briefly discussed the challenges regarding how to further improve the performance of ALP-based immunoassays.

Recent advances in enzymatic biofuel cells enabled by innovative materials and techniques

The past few decades have seen increasingly rapid advances in the field of sustainable energy technologies. As a new bio- and eco-friendly energy source, enzymatic biofuel cells (EBFCs) have garnered significant research interest due to their capacity to power implantable bioelectronics, portable devices, and biosensors by utilizing biomass as fuel under mild circumstances. Nonetheless, numerous obstacles impeded the commercialization of EBFCs, including their relatively modest power output and poor long-term stability of enzymes. To depict the current progress of EBFC and address the challenges it faces, this review traces back the evolution of EBFC and focuses on contemporary advances such as newly emerged multi or single enzyme systems, various porous framework-enzyme composites techniques, and innovative applications. Besides emphasizing current achievements in this field, from our perspective part we also introduced novel electrode and cell design for highly effective EBFC fabrication. We believe this review will assist readers in comprehending the basic research and applications of EBFCs as well as potentially spark interdisciplinary collaboration for addressing the pressing issues in this field.

Enzymatic biofuel cell-powered iontophoretic facial mask for enhanced transdermal drug delivery

Recent advances in enzymatic biofuel cells (EBFCs) have resulted in great progress in health monitoring and supplying power to medical applications, such as drug delivery. On the other hand, to enhance the electric field-assisted transdermal permeation for facial mask application, an external power source is usually required. Herein, we attempted to combine an EBFC with a facial mask so that the microcurrent generated can boost the transdermal permeability of target molecules in the facial mask essence. When screen-printed onto a polypropylene-based non-woven fabric, the three-layered flexible EBFC could produce a voltage of ∼0.4 V and a maximum power density of 23.3 μW cm^-2, leading to an approximately 2-3-fold increase in permeated nicotinamide, arbutin, and aspirin levels within 15 min compared to non-iontophoretic transdermal drug delivery. Both cell viability and animal experiments further demonstrated that the EBFC-powered iontophoresis worked well in living animals with good biocompatibility. These results suggest that the EBFC-powered iontophoretic facial mask can effectively improve the permeation of drugs and holds a promise for the possible cosmetic application.

Superior graphdiyne self-powered biosensing platform with highly sensitivity and reliability for dual-mode detection of MicroRNA by integrating T7 Exonuclease and 3D DNA walker induced rolling circle amplification

A highly sensitivity self-powered biosensor is developed based on T7 exonuclease (T7 Exo) and 3D DNA walker induced rolling circle amplification (RCA) for electrochemical/colorimetric dual-mode detection of microRNA-21 (miRNA-21) with improved reliability. Taking its advantage of fascinating properties, such as high structure defects and good conductivity, graphdiyne is prepared and used to prepare high-performance enzyme biofuel cell. T7 Exo-assisted 3D DNA walker target recognition triggers RCA reaction to obtain a significantly amplified signal response. A capacitor is integrated to the enzyme biofuel cell to further amplify the electrochemical output signal of the self-powered biosensor. In detection system, glucose oxidase catalyzes glucose oxidation to produce hydrogen peroxide, and 3,3',5,5'-tetramethylbenzidine (TMB) is then catalyzed to generate colored products, so as to achieve the colorimetric detection of the target. Analysis signals of diverse modes are recorded independently. Consequently, detection of microRNA with improved reliability and wider signal response range are achieved by electrochemical/colorimetric dual-mode with detection limits of 0.15 and 33 fM (S/N = 3) respectively. In addition, the proposed self-powered biosensor successfully applied for the detection of miRNA-21 in human serum samples, confirming its practical applicability in clinical diagnosis. It is powerfully anticipated the proposed self-powered biosensor possesses great potential to be applied to other biomedical domains.

Engineering Self-Powered Electrochemical Sensors Using Analyzed Liquid Sample as the Sole Energy Source

Many healthcare and environmental monitoring devices use electrochemical techniques to detect and quantify analytes. With sensors progressively becoming smaller-particularly in point-of-care (POC) devices and wearable platforms-it creates the opportunity to operate them using less energy than their predecessors. In fact, they may require so little power that can be extracted from the analyzed fluids themselves, for example, blood or sweat in case of physiological sensors and sources like river water in the case of environmental monitoring. Self-powered electrochemical sensors (SPES) can generate a response by utilizing the available chemical species in the analyzed liquid sample. Though SPESs generate relatively low power, capable devices can be engineered by combining suitable reactions, miniaturized cell designs, and effective sensing approaches for deciphering analyte information. This review details various such sensing and engineering approaches adopted in different categories of SPES systems that solely use the power available in liquid sample for their operation. Specifically, the categories discussed in this review cover enzyme-based systems, battery-based systems, and ion-selective electrode-based systems. The review details the benefits and drawbacks with these approaches, as well as prospects of and challenges to accomplishing them.

Nanobody/NanoBiT system-mediated bioluminescence immunosensor for one-step homogeneous detection of trace ochratoxin A in food

Hazardous small molecules in food and environment seriously threatens human health, which requires sensitive and rapid tools for monitoring. Using a previously identified nanobody against ochratoxin A (OTA), we herein proposed a homogeneous sensing platform "nanobody/NanoLuc Binary Technology (NanoBiT) system" and developed a nanobody/NanoBiT system-mediated bioluminescence immunosensor (NBL-Immunosens) for OTA using LgBiT (Lg) and SmBiT (Sm), two subunits of the split nanoluciferase (NanoLuc). The core elements of NBL-Immunosens include Lg-nanobody fusion (NLg) and Sm-labeled OTA-bovine serum albumin conjugate (OSm). The antigen-antibody interaction between NLg and OSm triggers the reconstitution of NanoLuc for generating luminescence signals. Moreover, free OTA can compete with OSm for binding to NLg, resulting the decrease of dose-dependent signals. NBL-Immunosens can detect OTA in a one-step assay of 5 min without washing and exhibit a limit of detection of 0.01 ng/mL with a linear range of 0.04-2.23 ng/mL. It shows high selectivity for OTA and has good accuracy and precision in the spiking-and-recovery experiments. Furthermore, its effectiveness was evaluated with real cereal samples and confirmed by liquid chromatography tandem mass spectrometry and commercial ELISA kits. Hence, the NBL-Immunosens is a very promising tool for rapid, accurate, and selective detection of trace OTA in food.

Rational design of an allosteric G-quadruplex aptamer probe for ultra-sensitive detection of melamine in milk

Efficient and accurate detection of melamine in dairy products remains a crucial yet challenging task. Herein, an allosterically modulated G-quadruplex-integrated aptamer is rationally designed with thymine-rich recognition termini for melamine binding. The detection process is facile by simply introducing the analyte into the mixture consisting of G-quadruplex aptamer probes, exonuclease III, and thioflavin T (ThT). The detection feasibility is confirmed by the polyacrylamide gel electrophoresis and fluorescence measurement results. This exonuclease III-assisted signal amplifiable approach works well in a linear range from 0.1 nM to 0.1 μM. Moreover, a detection limit as low as 83 pM is easily achieved, which is almost five orders of magnitude smaller than the maximum allowable melamine levels (about 8 μM) defined by many countries all over the world. The whole assay time for each test is no longer than 1 h. Additionally, the scheme is highly specific and satisfactory recovery rates (from 91% to 104%) are readily obtained when challenged with melamine-spiked milk samples. Therefore, the label-free, turn-on, low-cost, and time-efficient method can be used for reliable detection of melamine in an easily manipulated and ultra-sensitive manner, which may find its utilization in the field of food safety, biomedical engineering, and clinical diagnosis.

The creation of selective imprinted cavities on quartz crystal microbalance electrode for the detection of melamine in milk sample

Molecularly imprinted polymer based nanofilms specific to melamine were synthesized on quartz crystal microbalance (QCM) electrode surface. Contact angle measurements, atomic force microscopy, ellipsometry and scanning electron microscopy were used for characterizations process. Some of the findings of the study are as follows: pH 6.0 was found as optimal working pH for melamine detection. Prepared MIP QCM electrode showed a linearity of 99.53% in the concentration range of 50-1000 ng/mL. Langmuir-Freundlich hybrid model was the best fitted isotherm for whole concentration range. The performance of MIP QCM electrode was also confirmed by determining of melamine in melamine spiked milk samples. As a conclusion, the results figured out that not only QCM nanosensor for specific melamine detection but also polymerization strategy were classified as an intriguing alternative for developing new melamine sensing platforms. Limit of detection (LOD) and limit of quantification (LOQ) were calculated as 2.3 ng/mL and 7.8 ng/mL, respectively.

A novel aptamer RRS assay platform for ultratrace melamine based on COF-loaded Pd nanocluster catalytic amplification

Two COFs of BzBD and BzBD loaded Pd nanoclusters (BzBD_Pd) were prepared using 1,3,5-benzenetricarboxaldehyde (Bz), benzidine (BD) and CO reducing agent, and were characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRD), infrared spectroscopy (IR) and other techniques. BzBD_Pd can strongly catalyze the new and stable Au@NiP nanoreaction that exhibit a strong resonance Rayleigh scattering (RRS) peak at 538 nm and a surface plasmon resonance (SPR) absorption peak at 395 nm, and the sensitive and facile RRS technique was used to study the indicator reaction. Combining the nanocatalytic amplification reaction with specific aptamer (Apt) of some target molecules such as melamine (ML), urea (UR) and bisphenol A (BPA), a simple, sensitive and selective Apt RRS assay platform was established. The linear range of the RRS detection platform for melamine is 0.0025-0.04 nmol/L, and the detection limit (DL) is 1.96 × 10^-4 nmol/L. In addition, ML in real sample was analyzed, the stability of BzBD, BzBD_Pd, PdNPs and the catalytic mechanism of COF_Pd were also considered.

Electrochemiluminescence biosensor for cardiac troponin I with signal amplification based on a MoS2@Cu2O–Ag-modified electrode and Ce:ZnO-NGQDs

A sensitive sandwiched electrochemiluminescence (ECL) immunosensor was built for the detection of cTnI. The ECL immunosensor had a low detection limit (2.90 fg mL−1) and wide detection range (10 pg mL−1 to 100 ng mL−1).

Biofuel Cell-Driven Robust Electrochemiluminescence Biosensing Platform

Electrochemiluminescence (ECL) is one powerful tool in the sensing field, in which the electrochemical workstation is necessary to achieve the electrical/optical signal conversion in the presence of luminescent agents. By contrast, biofuel cells (BFCs) can also provide electricity from renewable biofuels under moderate conditions. More importantly, BFCs with the features of adjustable voltage output and excellent compatibility would well meet the requirement of working voltages for different ECL devices. However, to the best of our knowledge, the BFC-driven luminous system has not been reported. In this work, we constructed, for the first time, a BFC-driven ECL system with fast and stable signal outputs. To demonstrate the proof-of-concept of the BFC-ECL system, the sensitive and selective detection of histidine was achieved, exhibiting great potential among point-of-care diagnoses in remote regions. Overall, this work not only paves a new way for the conversion of chemical energy, electrical energy, and luminous system but also explores the new application of BFC.

Impedimetric and Plasmonic Sensing of Collagen I Using a Half-Antibody-Supported, Au-Modified, Self-Assembled Monolayer System

This research presents an electrochemical immunosensor for collagen I detection using a self-assembled monolayer (SAM) of gold nanoparticles (AuNPs) and covalently immobilized half-reduced monoclonal antibody as a receptor; this allowed for the validation of the collagen I concentration through two different independent methods: electrochemically by Electrochemical Impedance Spectroscopy (EIS), and optically by Surface Plasmon Resonance (SPR). The high unique advantage of the proposed sensor is based on the performance of the stable covalent immobilization of the AuNPs and enzymatically reduced half-IgG collagen I antibodies, which ensured their appropriate orientation onto the sensor's surface, good stability, and sensitivity properties. The detection of collagen type I was performed in a concentration range from 1 to 5 pg/mL. Moreover, SPR was utilized to confirm the immobilization of the monoclonal half-antibodies and sensing of collagen I versus time. Furthermore, EIS experiments revealed a limit of detection (LOD) of 0.38 pg/mL. The selectivity of the performed immunosensor was confirmed by negligible responses for BSA. The performed approach of the immunosensor is a novel, innovative attempt that enables the detection of collagen I with very high sensitivity in the range of pg/mL, which is significantly lower than the commonly used enzyme-linked immunosorbent assay (ELISA).

Hybridization chain reaction and its applications in biosensing

To pursue the sensitive and efficient detection of informative biomolecules for bioanalysis and disease diagnosis, a series of signal amplification techniques have been put forward. Among them, hybridization chain reaction (HCR) is an isothermal and enzyme-free process where the cascade reaction of hybridization events is initiated by a target analyte, yielding a long nicked dsDNA molecule analogous to alternating copolymers. Compared with conventional polymerase chain reaction (PCR) that can proceed only with the aid of polymerases and complicated thermal cycling, HCR has attracted increasing attention because it can occur under mild conditions without using enzymes. As a powerful signal amplification tool, HCR has been employed to construct various simple, sensitive and economic biosensors for detecting nucleic acids, small molecules, cells, and proteins. Moreover, HCR has also been applied to assemble complex nanostructures, some of which even act as the carriers to execute the targeted delivery of anticancer drugs. Recently, HCR has engendered tremendous progress in RNA imaging applications, which can not only achieve endogenous RNA imaging in living cells or even living animals but also implement imaging-guided photodynamic therapy, paving a promising path to promote the development of theranostics. In this review, we begin with the fundamentals of HCR and then focus on summarizing the recent advances in HCR-based biosensors for biosensing and RNA imaging strategies. Further, the challenges and future perspective of HCR-based signal amplification in biosensing and theranostic application are discussed.

Photo-driven self-powered biosensors for ultrasensitive microRNA detection based on metal-organic framework-controlled release behavior

We developed a "signal-on" self-powered biosensing strategy by taking full advantage of both photoelectrochemical biofuel cells (PBFCs) and metal-organic framework (MOF)-controlled release behavior for ultrasensitive microRNA assay. PBFC-based self-powered sensors have the unique characteristics of non-requirement of external power sources, simple fabrication process, miniature size, good anti-interference ability and low cost. Furthermore, based on the target microRNA-induced release of the electron donor ascorbic acid and the high catalytic ability of the biocathode to catalyse the oxygen reduction reaction, photo-driven self-powered biosensors for ultrasensitive microRNA detection were successfully realized. The as-proposed signal-on biosensor not only provides a simple and effective strategy, but also possesses the merits of a wide dynamic concentration response range and high sensitivity for microRNA detection, with a limit of detection down to 0.16 fM.

A photoelectrochemical biofuel cell based on a TiO2 nanotube array fluorine-doped tin oxide photoanode

Photoelectrochemical biofuel cells can convert light and chemical energy into electrical energy using a dye-sensitized titania (TiO2) fluorine-doped tin oxide photoanode and a platinum-coated fluorine-doped tin oxide cathode. TiO2 of the photoanode serves both as a support for dyes and as an electron-transporting medium, the structure of which can limit electron trapping and charge transporting and then affect the performance of the photoelectrochemical biofuel cells. TiO2 nanotube array films have been shown to enhance the efficiencies of both charge collection and electron injection, and hence a vertically aligned TiO2 nanotube array is investigated as a conductor for the tetrakis(4-carboxyphenyl)porphyrin dye to construct a new two-compartment photoelectrochemical biofuel cell. The photoelectrochemical biofuel cell containing the TiO2 nanotube array photoanode yields a short-circuit (Isc) current of 110 μA and an open-circuit (Voc) potential of 1010 mV. In contrast, the photovoltaic parameters, Isc and Voc of the photoelectrochemical biofuel cell with the mesoporous TiO2 nanocrystal fluorine-doped tin oxide photoanode, are 96.96 μA and 740 mV, respectively. Photovoltaic measurements show that the maximum incident photon-to-collected electron conversion efficiency was 58% at 430 nm through the spectral range (400–800 nm) for the photoelectrochemical biofuel cell with the TiO2 nanotube array fluorine-doped tin oxide photoanode. These results revealed that the TiO2 nanotube array had great potential for the photoelectrochemical biofuel cells.

In situ deposition of MOF-74(Cu) nanosheet arrays onto carbon cloth to fabricate a sensitive and selective electrocatalytic biosensor and its application for the determination of glucose in human serum

A new electrocatalytic biosensor (MOF-74(Cu) NS-CC) based on the in situ deposition of MOF-74(Cu) nanosheet on carbon cloth via a bottom-up synthetic approach in a glass tube was developed. The electrocatalytic activity of the deposited MOF-74(Cu) NS was demonstrated in the oxidation of glucose to gluconate under alkaline conditions. The results revealed that the proposed method of in situ formation of MOF-74(Cu) NS onto a carbon cloth surface in a multi-layer solution is capable to generate a stable MOF-74(Cu) NS-CC electrode with excellent sensing performance. When the as-synthesized MOF-74(Cu) NS-CC was applied directly as the working electrode for glucose sensing, it showed much higher conductivity and redox activity than MOF-74(Cu) NS-GCE. With the potential applied at 0.55 V (vs. Ag/AgCl), this new electrocatalytic biosensor exhibits an excellent linear relationship between current density and concentration of glucose. Moreover, a wide linear range of detection (1.0 to 1000 μM) was observed. The limit of detection was found to be 0.41 μM (S/N = 3). The response sensitivity is 3.35 mA mM^-1 cm^-2 when the concentration of glucose is in the range 1-100 μM and 3.81 mA mM^-1 cm^-2 for the 100-1000 μM concentration range. This study provides a low-cost, easy to prepare, and reproducible methodology for the synthesis of highly redox-active nanomaterials based on the in situ formation of two-dimensional MOF-74(Cu) NS for the development of new electrocatalytic biosensors. Graphical abstract.

Recent development of biofuel cell based self-powered biosensors

BFC-based SPBs have been used as power sources for other devices and as sensors for detecting toxicity and BOM.

A high-energy sandwich-type self-powered biosensor based on DNA bioconjugates and a nitrogen doped ultra-thin carbon shell

A high-energy self-powered sensing platform for the ultrasensitive detection of proteins is developed based on enzymatic biofuel cells (EBFCs) by using DNA bioconjugate assisted signal amplification.

Photo-driven self-powered biosensor for ultrasensitive microRNA detection via DNA conformation-controlled co-sensitization behavior

We developed a photoelectrochemical enzymatic fuel cell-based self-powered biosensing platform for microRNA detection via DNA conformation change-controlled co-sensitization behavior.

Light-driven ultrasensitive self-powered cytosensing of circulating tumor cells via integration of biofuel cells and a photoelectrochemical strategy

Herein, a light-driven, membrane-less and mediator-less self-powered cytosensing platform via integration of biofuel cells (BFCs) and a photoelectrochemical strategy was developed for ultrasensitive detection of circulating tumor cells (CTCs). To construct cytosensors, an elaborately designed SH-Sgc8c aptamer/AuNP/g-C₃N₄ photoelectrode was used as an alternative anode for glucose oxidation, avoiding the introduction of anodic enzymes. Initially, glucose could favorably reach the photoanode surface and be easily oxidized by the photogenerated holes, while the photogenerated electrons would transfer to the biocathode and achieve biocatalytic reduction of O₂, leading to a high E^OCV. However, in the presence of CTCs, they could preferentially interact with the Sgc8c aptamer via specific recognition, and then complexes with large steric hindrance were immobilized on the photoanode surface, which could greatly affect the electron transfer between glucose and the photoanode surface. In this case, the E^OCV decreased sharply. Encouragingly, this self-powered cytosensor exhibited an ultrasensitive response to the target CTCs in a wide concentration range from 20 to 2 × 10⁵ cells mL^-1 with a low detection limit of 10 cells mL^-1 (S/N = 3), being superior to those of the reported methods. Moreover, this as-proposed self-powered cytosensor integrated with a photoelectrochemical strategy possessed unique advantages of not requiring an external power source, being anodic enzyme-free, having a simple construction process, facile miniaturization, and high selectivity and sensitivity, providing a promising and powerful tool for fundamental biochemical research and clinical diagnosis.

Paper-Supported Self-Powered System Based on a Glucose/O2 Biofuel Cell for Visual MicroRNA-21 Sensing

The exploitation of self-powered devices that get rid of the power source restriction represents the development tendency of sensing systems. Herein, a paper-supported glucose/O₂ biofuel cell (BFC)-based self-powered sensing platform for visual analysis was developed. The BFC device utilized gold nanoparticle-modified paper fibers as the electrode to wire glucose oxidase (GOx) and bilirubin oxidase for the fabrication of bioanodes and biocathodes. To implement an assay protocol, a target-responsive cargo release system based on mesoporous silica nanocarriers controlled by microRNA-21 (miRNA-21) was designed. During the BFC operation, undesired H₂O₂, the side product of glucose oxidation which would be deleterious for GOx, was generated, leading to inevitable degeneration of BFC performance. On the basis of the H₂O₂-mediated iodide oxidation reaction to form iodine that further modulated the starch chromogenic reaction, undesired H₂O₂ could be effectively removed, resulting in remarkably improved BFC performance as well as providing a means for visual signal readout. Thanks to the dual output signals (maximum power output density or length of blue bar), enhanced analysis reliability and sensitive detection of miRNA-21 over a range of 5 fM to 100 pM were achieved. Moreover, this study demonstrates a proof of concept in visualized BFC-based self-powered systems for sensing applications and provides a blueprint to advance future sensors and analysis devices powered by BFCs in a wide variety of in vitro applications.

Paper based modification-free photoelectrochemical sensing platform with single-crystalline aloe like TiO2 as electron transporting material for cTnI detection

By controlling target-induced signal quencher release, a label-free and modification-free microfluidic paper based photoelectrochemical analytical device (μ-PAD) for cardiac troponin-I (cTnI) detection was designed for the first time. To achieve it, cellulose paper based single-crystalline three-dimensional aloe like TiO₂ arrays (PSATs) were firstly fabricated as the electron transporting material, providing direct pathways for the charge carriers transfer, and subsequently coupled with CdS to form PSATs/CdS heterojunction for extending the solar spectrum response. Meanwhile, positive charged mesoporous silica nanoparticles (PMSNs) were prepared as the nanocarrier to efficient entrap the Cu²⁺ which could be regarded as signal quencher due to their reaction with CdS to form Cu_xS. Single stranded DNAs (ssDNAs), which could bind specifically with the target of cTnI, were then introduced to couple with the PMSNs and used as the bio-gate to encapsulate the signal quencher of Cu²⁺, endowing the functional PMSNs with responsiveness to cTnI. When the cTnI existed, the ssDNAs were dissociated from PMSNs due to the formation of cTnI-ssDNAs complexes, triggering controllable release of the trapped Cu²⁺, and further decreasing the photocurrent signal caused by the formation of Cu_xS. Accordingly, the concentration of cTnI could be accurately quantified via the photocurrent, realizing the target-induced modification-free μ-PAD assay. We believe this work could provide an ingenious idea to construct the easy-to-use novel modification-free μ-PAD.

Flexible Electronics Based on Micro/Nanostructured Paper

Over the past several years, a new surge of interest in paper electronics has arisen due to the numerous merits of simple micro/nanostructured substrates. Herein, the latest advances and principal issues in the design and fabrication of paper-based flexible electronics are highlighted. Following an introduction of the fascinating properties of paper matrixes, the construction of paper substrates from diverse functional materials for flexible electronics and their underlying principles are described. Then, notable progress related to the development of versatile electronic devices is discussed. Finally, future opportunities and the remaining challenges are examined. It is envisioned that more design concepts, working principles, and advanced papermaking techniques will be developed in the near future for the advanced functionalization of paper, paving the way for the mass production and commercial applications of flexible paper-based electronic devices.

Efficient Biomass Fuel Cell Powered by Sugar with Photo- and Thermal-Catalysis by Solar Irradiation

The utilization of biomass sugars has received great interesting recently. Herein, we present a highly efficient hybrid solar biomass fuel cell that utilizes thermal- and photocatalysis of solar irradiation and converts biomass sugars into electricity with high power output. The fuel cell uses polyoxometalates (POMs) as photocatalyst to decompose sugars and capture their electrons. The reduced POMs have strong visible and near-infrared light adsorption, which can significantly increase the temperature of the reaction system and largely promotes the thermal oxidation of sugars by the POM. In addition, the reduced POM functions as charge carrier that can release electrons at the anode in the fuel cell to generate electricity. The electron-transfer rates from glucose to POM under thermal and light-irradiation conditions were investigated in detail. The power outputs of this solar biomass fuel cell are investigated by using different types of sugars as fuels, with the highest power density reaching 45 mW cm^-2 .

Electrochemical detection of NGF using a reduced graphene oxide- titanium nitride nanocomposite

There is a correlation between the severity of neurological impairment in patients that have suffered a cerebrovascular accident and the nerve growth factor (NGF) level. This study addressed the fabrication of a titanium nitride (TiN) and reduced graphene oxide (RGO)-based composite with remarkable electrocatalytic activity towards NGF oxidation in a phosphate buffer solution (PB, 0.1 M). The proposed electrochemical sensor was linearly related to the NGF concentration in the range of 10 nM-5 μM with a detection limit of 2.6 nM.

Integration of Biofuel Cell-Based Self-Powered Biosensing and Homogeneous Electrochemical Strategy for Ultrasensitive and Easy-To-Use Bioassays of MicroRNA

Biofuel cell (BFC)-based self-powered biosensors have attracted substantial attentions because of their unique merits such as having no need for power sources (only two electrodes are needed). More importantly, in case it can also work in a homogeneous system, more efficient and easy-to-use bioassays could come true. Thus, herein, we proposed a novel homogeneous self-powered biosensing strategy via the integration of BFCs and a homogeneous electrochemical method, which was further utilized for ultrasensitive microRNA (miRNA) detection. To construct such an assay protocol, the cathodic electron acceptor [Fe(CN)₆]^3- was entrapped in the pores of positively charged mesoporous silica nanoparticles and capped by the biogate DNAs. Once the target miRNA existed, it would trigger the controlled release of [Fe(CN)₆]^3-, leading to the dramatic increase of the open circuit voltage. Consequently, the "signal-on" homogeneous self-powered biosensor for the ultrasensitive miRNA assay was realized. Encouragingly, the limit of detection for the miRNA-21 assay was down to 2.7 aM (S/N = 3), obviously superior to those of other analogous reported approaches. This work not only provides an ingenious idea to construct the ultrasensitive and easy-to-use bioassays of miRNA but also exhibits a successful prototype of a portable and on-site biomedical sensor.