Sustained Release Strategy Designed for Lixisenatide Delivery to Synchronously Treat Diabetes and Associated Complications

Prevented Cell Clusters' Migration Via Microdot Biomaterials for Inhibiting Scar Adhesion

Cluster-like collective cell migration of fibroblasts is one of the main factors of adhesion in injured tissues. In this research, a microdot biomaterial system is constructed using α-helical polypeptide nanoparticles and anti-inflammatory micelles, which are prepared by ring-opening polymerization of α-amino acids-N-carboxylic anhydrides (NCAs) and lactide, respectively. The microdot biomaterial system slowly releases functionalized polypeptides targeting mitochondria and promoting the influx of extracellular calcium ions under the inflammatory environment, thus inhibiting the expression of N-cadherin mediating cell-cell interaction, and promoting apoptosis of cluster fibroblasts, synergistically inhibiting the migration of fibroblast clusters at the site of tendon injury. Meanwhile, the anti-inflammatory micelles are celecoxib (Cex) solubilized by PEG/polyester, which can improve the inflammatory microenvironment at the injury site for a long time. In vitro, the microdot biomaterial system can effectively inhibit the migration of the cluster fibroblasts by inhibiting the expression of N-cadherin between cell-cell and promoting apoptosis. In vivo, the microdot biomaterial system can promote apoptosis while achieving long-acting anti-inflammation effects, and reduce the expression of vimentin and α-smooth muscle actin (α-SMA) in fibroblasts. Thus, this microdot biomaterial system provides new ideas for the prevention and treatment of tendon adhesion by inhibiting the cluster migration of fibroblasts.

Development of 1 Month Sustained-Release Microspheres Containing Liraglutide for Type 2 Diabetes Treatment

Liraglutide has been extensively applied in the treatment of type 2 diabetes mellitus (T2DM), but its 11-15 h half-life resulted in daily administration, which led to poor patient compliance. This study aimed to solve this problem by developing liraglutide-loaded microspheres with a 1 month sustained release prepared by the W1/O/W2 method combined with the premix membrane emulsification technique to improve therapeutic efficacy. Remarkably, we found that the amphiphilic properties of liraglutide successfully reduced the oil-water interfacial tension, resulting in a stable primary emulsion and decreasing the level of drug leakage into the external water phase. As a result, exceptional drug loading (>8%) and encapsulation efficiency (>85%) of microspheres were achieved. Furthermore, the uniformity in microsphere size facilitated an in-depth exploration of the structural characteristics of liraglutide-loaded microspheres. The results indicated that the dimensions of the internal cavities of the microspheres were significantly influenced by the size of the inner water droplets in the primary emulsion. A denser and more uniform cavity structure decreased the initial burst release, improving the release process of liraglutide from the microspheres. To evaluate the release behavior of liraglutide from microspheres, a set of in vitro release assays and in vivo pharmacodynamics were performed. The liraglutide-loaded microspheres effectively decreased fasting blood glucose (FBG) levels and hemoglobin A1c (HbA1c) levels while enhancing the pancreatic and hepatic functions in db/db mice. In conclusion, liraglutide sustained-release microspheres showed the potential for future clinical applications in the management of T2DM and provided an effective therapeutic approach to overcoming patient compliance issues.

Metal-polyphenol microgels for oral delivery of puerarin to alleviate the onset of diabetes

Puerarin (Pue) is a naturally bioactive compound with many potential functions in regulating blood glucose and lipid metabolism. However, the low bioavailability and rapid elimination in vivo limit the application of Pue in diabetic treatment. Here, we developed a metal-polyphenol-functionalized microgel to effectively deliver Pue in vivo and eventually alleviate the onset of diabetes. Pue was initially encapsulated in alginate beads through electrospray technology, and further immersed in Fe3+ and tannic acid solution from tannic acid (TA)-iron (Fe) coatings (TF). These constructed Pue@SA-TF microgels exhibited uniform spheres with an average size of 367.89 ± 18.74 µm and high encapsulation efficiency of Pue with 61.16 ± 1.39%. In vivo experiments proved that compared with free Pue and microgels without TF coatings, the biological distribution of Pue@SA-TF microgels specifically accumulated in the small intestine, prolonged the retention time of Pue, and achieved a high effectiveness in vivo. Anti-diabetic experimental results showed that Pue@SA-TF microgels significantly improved the levels of blood glucose, blood lipid, and oxidative stress in diabetic mice. Meanwhile, histopathological observations indicated that Pue@SA-TF microgels could significantly alleviate the damage to the liver, kidney, and pancreas in diabetic mice. Our study provided an effective strategy for oral delivery of Pue and achieved high anti-diabetic efficacy.

A review of recent research and development on GLP-1 receptor agonists-sustained-release microspheres

Glucagon-like peptide-1 receptor agonists (GLP-1 RAs) are increasingly used in treating type 2 diabetes (T2D). However, owing to their limited oral bioavailability, most commercially available GLP-1 RAs are administered through frequent subcutaneous injections, which may result in poor patient compliance during clinical treatment. To improve patients' compliance, sustained-release GLP-1 RA-loaded microspheres have been explored. This review is an overview of recent progress and research in GLP-1 RA-loaded microspheres. First, the fabrication methods of GLP-1 RA-loaded microspheres including the coacervation method, emulsion-solvent evaporation method based on agitation, premix membrane emulsification technology, spray drying, microfluidic droplet technology, and supercritical fluid technology are summarized. Next, the strategies for maintaining GLP-1 RAs' stability and activity in microspheres by adding additives and PEGylation are reviewed. Finally, the effect of particle size, drug distribution, the internal structure of microspheres, and the hydrogel/microsphere composite strategy on improved release behavior is summarized.

Layer-by-layer reinforced-mediated sustained-release nanoantioxidants for long-lasting prevention against drug-induced liver injury

Drug-induced liver injury (DILI) is a commonly encountered and diagnostically complex etiology of acute liver failure, characterized by early indications of hepatic oxidative stress. The most economical approach for DILI treatment is effective and durable oxidative stress prevention. Herein, we propose a long-lasting nanoantioxidant called PDA-Zn-BAI NPs characterized by sustained-release of baicalein (a natural antioxidant) for the long-lasting prevention of DILI. It is constructed using dopamine as an intermediate and layer-by-layer reinforcement strategy based on Zn2+-mediated coordination bonding, π-π stacking, and steric hindrance made of polydopamine network. Optimized PDA-Zn-BAI NPs performed a satisfactory sustained-release effect (36.67% ± 6.67 in normal condition and 60.32% ± 3.19 in acid condition of cumulative release within 5 days). Furthermore, it's been found that PDA-Zn-BAI NPs could continuously be accumulated in the liver with negligible hepatotoxicity and were activated to effectively scavenge reactive oxygen species to break off the damage of acetaminophen to the liver within 5 days (ALT as an indicator, > 70% prevention effect lasts for 5 days), which was vital for the long-lasting prevention of DILI. The long-lasting detoxification by PDA-Zn-BAI NPs in patients with DILI suggested a potential clinical application, especially for those patients who need prolonged administration of hepatotoxic drugs.

Current Role and Potential of Polymeric Biomaterials in Clinical Obesity Treatment

The rise of obesity and associated fatal diseases has taken a massive toll worldwide. Despite the existing pharmaceuticals and bariatric surgeries, these approaches manifest limited efficacy or accompany various side effects. Therefore, researchers seek to facilitate the prolonged and specific delivery of therapeutics. Or else, to mimic the essential part of "gastric bypass" by physically blocking excessive absorption via less invasive methods. To achieve these goals, polymeric biomaterials have gained tremendous interest recently. They are known for synthesizing hydrogels, microneedle patches, mucoadhesive coatings, polymer conjugates, and so forth. In this Review, we provide insights into the current studies of polymeric biomaterials in the prevention and treatment of obesity, inspiring future improvements in this regime of study.

Self-assembly of chlorogenic acid into hydrogel for accelerating wound healing

Wound healing remains a considerable challenge due to its complex inflammatory microenvironment. Developing novel wound dressing materials with superior wound repair capabilities is highly required. However, conventional dressing hydrogels for wound healing are often limited by their complex cross-linking, high treatment costs, and drug-related side effects. In this study, we report a novel dressing hydrogel constructed only by the self-assembly of chlorogenic acid (CA). Molecular dynamic simulation studies revealed the formation of CA hydrogel was mainly through non-covalent interactions, such as π-π and hydrogen bond. Meanwhile, CA hydrogel exhibited superior self-healing, injectability, and biocompatibility properties, making it a promising candidate for wound treatment. As expected, in vitro experiments demonstrated that CA hydrogel possessed remarkable anti-inflammatory activity, and its ability to promote the generation of microvessels in HUVEC cells, as well as the promotion of microvessel formation in HUVEC cells and proliferation of HaCAT cells. Subsequent in vivo investigation further demonstrated that CA hydrogel accelerated wound healing in rats through regulating macrophage polarization. Mechanistically, the CA hydrogel treatment enhanced the closure rate, collagen deposition, and re-epithelialization while simultaneously suppressing the secretion of pro-inflammatory cytokines and increasing the production of CD31 and VEGF during the wound healing process. Our findings indicate that this multifunctional CA hydrogel is a promising candidate for wound healing, particularly in cases of impaired angiogenesis and inflammatory responses.

Injectable hydrogel imbibed with camptothecin-loaded mesoporous silica nanoparticles as an implantable sustained delivery depot for cancer therapy

In recent years, injectable stimuli-sensitive hydrogels are employed as suitable drug delivery carriers for the release of various anti-cancer drugs. However, large pore size of the microporous hydrogel trigger release of small molecular anticancer drug that limits hydrogel application in cancer therapy. Therefore, introducing reinforcing fillers such as mesoporous silica nanoparticles (MSNs) can not only load different type of anticancer drugs but also prevent the premature release of drugs due to the strengthening of the networks. Furthermore, high specific surface area, suitable size, large pore volume, and stable physicochemical properties of MSNs can improve the therapeutic efficacy. In this study, to sustain the release of hydrophobic anticancer drug, camptothecin (CPT) was loaded into MSNs, and then imbibed into the physiological stimuli-sensitive poly(ethylene glycol)-poly(β-aminoester urethane) (PAEU) hydrogels. MSN-imbibed PAEU hydrogels exhibited prolonged release of CPT than MSNs and PAEU hydrogel alone. Furthermore, MSN-imbibed PAEU copolymers form stable viscoelastic gel depot into the subcutaneous layers of Sprague-Dawley rats and found to be safe and not induced toxicity to healthy organs, implying biodegradability and safety of the hydrogels. Interestingly, CPT-loaded hydrogels shown dose-dependent toxicity to A549 and B16F10 cells. These results demonstrated that MSN-imbibed PAEU hydrogel with biocompatible, biodegradable, and in situ gel forming property could be a useful drug delivery depot for sustained release of anticancer drugs.

Regulated extravascular microenvironment via reversible thermosensitive hydrogel for inhibiting calcium influx and vasospasm

Arterial vasospasm after microsurgery can cause severe obstruction of blood flow manifested as low tissue temperature, leading to tissue necrosis. The timely discovery and synchronized treatment become pivotal. In this study, a reversible, intelligent, responsive thermosensitive hydrogel system is constructed employing both the gel–sol transition and the sol–gel transition. The “reversible thermosensitive (RTS)” hydrogel loaded with verapamil hydrochloride is designed to dynamically and continuously regulate the extravascular microenvironment by inhibiting extracellular calcium influx. After accurate implantation and following in situ gelation, the RTS hydrogel reverses to the sol state causing massive drug release to inhibit vasospasm when the tissue temperature drops to the predetermined transition temperature. Subsequent restoration of the blood supply alleviates further tissue injury. Before the temperature drops, the RTS hydrogel maintains the gel state as a sustained-release reservoir to prevent vasospasm. The inhibition of calcium influx and vasospasm in vitro and in vivo is demonstrated using vascular smooth muscle cells, mice mesenteric arterial rings, and vascular ultrasonic Doppler detection. Subsequent animal experiments demonstrate that RTS hydrogel can promote tissue survival and alleviate tissue injury responding to temperature change. Therefore, this RTS hydrogel holds therapeutic potential for diseases requiring timely detection of temperature change.

•

Proposing a new strategy for the discovery and treatment for diseases requiring timely detection of temperature change.

•

Applying both the gel–sol transition and the sol–gel transition of PEG/PLGA triblock polymers.

•

Realizing the dynamical and continuous regulation of the extravascular microenvironment.

Motion lubrication suppressed mechanical activation via hydrated fibrous gene patch for tendon healing

Mechanical activation of fibroblasts, caused by friction and transforming growth factor-β1 recognition, is one of the main causes of tissue adhesions. In this study, we developed a lubricated gene-hydrogel patch, which provides both a motion lubrication microenvironment and gene therapy. The patch's outer layer is composed of polyethylene glycol polyester hydrogel. The hydrogel forms hydrogen bonds with water molecules to create the motion lubrication layer, and it also serves as a gene delivery library for long-term gene silencing. Under the motion lubricated microenvironment, extracellular signal-regulated kinase-small interfering RNA can silence fibroblasts and enhance the blocking effect against fibroblast activation. In vitro, the proposed patch effectively inhibits fibroblast activation and reduces the coefficient of friction. In vivo, this patch reduces the expression of vimentin and α-smooth muscle actin in fibroblasts. Therefore, the lubricated gene-hydrogel patch can inhibit the mechanical activation of fibroblasts to promote tendon healing.

The recent advancement in the PLGA-based thermo-sensitive hydrogel for smart drug delivery

To date, hydrogels have opened new prospects for potential applications for drug delivery. The thermo-sensitive hydrogels have the great potential to provide more effective and controllable release of therapeutic/bioactive agents in response to changes in temperature. PLGA is a safe FDA-approved copolymer with good biocompatibility and biodegradability. Recently, PLGA-based formulation have attracted a lot of interest for thermo-sensitive hydrogels. Thermo-sensitive PLGA-based hydrogels provide the delivery system with good spatial and temporal control, and have been widely applied in drug delivery. This review is focused on the recent progression of the thermo-sensitive and biodegradable PLGA-based hydrogels that have been reported for smart drug delivery to the different organs. Eventually, future perspectives and challenges of thermo-sensitive PLGA-based hydrogels are discussed briefly.

Injectable heat-sensitive nanocomposite hydrogel for regulating gene expression in the treatment of alcohol-induced osteonecrosis of the femoral head

For repairing lesions, it is important to recover physiological and cellular activities. Gene therapy can restore these activities by regulating the expression of genes in lesion cells; however, in chronic diseases, such as alcohol-induced osteonecrosis of the femoral head (ONFH), gene therapy has failed to provide long-term effects. In this study, we developed a heat-sensitive nanocomposite hydrogel system with a secondary nanostructure that can regulate gene expression and achieve long-term gene regulation in lesion cells. This nanocomposite hydrogel exists in a liquid state at 25 °C and is injectable. Once injected into the body, the hydrogel can undergo solidification induced by body heat, thereby gaining the ability to be retained in the body for a prolonged time period. With the gradual degradation of the hydrogel in vivo, the internal secondary nanostructures are continuously released. These nanoparticles carry plasmids and siRNA into lesion stem cells to promote the expression of B-cell lymphoma 2 (inhibiting the apoptosis of stem cells) and inhibit the secretion of peroxisome proliferators-activated receptors γ (PPARγ, inhibiting the adipogenic differentiation of stem cells). Finally, the physiological activity of the stem cells in the ONFH area was restored and ONFH repair was promoted. In vivo experiments demonstrated that this nanocomposite hydrogel can be indwelled for a long time, thereby providing long-term treatment effects. As a result, bone reconstruction occurs in the ONFH area, thus enabling the treatment of alcohol-induced ONFH. Our nanocomposite hydrogel provides a novel treatment option for alcohol-related diseases and may serve as a useful biomaterial for other gene therapy applications.

An antioxidant and antibacterial polydopamine-modified thermo-sensitive hydrogel dressing for Staphylococcus aureus-infected wound healing

Bacteria-infected wound healing is a complex and chronic process that poses a great threat to human health. A thermo-sensitive hydrogel that undergoes a sol-gel transition at body temperature is an attractive wound dressing for healing acceleration and infection prevention. In this paper, we present a thermo-sensitive and reactive oxygen species (ROS)-scavenging hydrogel based on polydopamine modified poly(ε-caprolactone-co-glycolide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-glycolide) (PDA/P2) triblock copolymer. The PDA/P2 solution at a concentration of 30 wt% could form a gel at 34-38 °C. The ROS-scavenging ability of PDA/P2 was demonstrated by DPPH and ABTS assays and intracellular ROS downregulation in RAW264.7 cells. Furthermore, silver nanoparticles were encapsulated in the hydrogel (PDA/P2-4@Ag gel) to provide antibacterial activity against E. coli and S. aureus. An in vivo S. aureus-infected rat model demonstrated that the PDA/P2-4@Ag hydrogel dressing could promote wound healing via inhibiting bacterial growth, alleviating the inflammatory response, and inducing angiogenesis and collagen deposition. This study provides a new strategy to prepare temperature-sensitive hydrogel-based multifunctional wound dressings.

Uncovering the gene regulatory network of type 2 diabetes through multi-omic data integration

BACKGROUND

Type 2 diabetes (T2D) onset is a complex, organized biological process with multilevel regulation, and its physiopathological mechanisms are yet to be elucidated. This study aims to find out the key drivers and pathways involved in the pathogenesis of T2D through multi-omics analysis.

METHODS

The datasets used in the experiments comprise three groups: (1) genomic (2) transcriptomic, and (3) epigenomic categories. Then, a series of bioinformatics technologies including Marker set enrichment analysis (MSEA), weighted key driver analysis (wKDA) was performed to identify key drivers. The hub genes were further verified by the Receiver Operator Characteristic (ROC) Curve analysis, proteomic analysis, and Real-time quantitative polymerase chain reaction (RT-qPCR). The multi-omics network was applied to the Pharmomics pipeline in Mergeomics to identify drug candidates for T2D treatment. Then, we used the drug-gene interaction network to conduct network pharmacological analysis. Besides, molecular docking was performed using AutoDock/Vina, a computational docking program.

RESULTS

Module-gene interaction network was constructed using MSEA, which revealed a significant enrichment of immune-related activities and glucose metabolism. Top 10 key drivers (PSMB9, COL1A1, COL4A1, HLA-DQB1, COL3A1, IRF7, COL5A1, CD74, HLA-DQA1, and HLA-DRB1) were selected by wKDA analysis. Among these, COL5A1, IRF7, CD74, and HLA-DRB1 were verified to have the capability to diagnose T2D, and expression levels of PSMB9 and CD74 had significantly higher in T2D patients. We further predict the co-expression network and transcription factor (TF) binding specificity of the key driver. Besides, based on module interaction networks and key driver networks, 17 compounds are considered to possess T2D-control potential, such as sunitinib.

CONCLUSIONS

We identified signature genes, biomolecular processes, and pathways using multi-omics networks. Moreover, our computational network analysis revealed potential novel strategies for pharmacologic interventions of T2D.

Recent advances in regenerative biomaterials

Nowadays, biomaterials have evolved from the inert supports or functional substitutes to the bioactive materials able to trigger or promote the regenerative potential of tissues. The interdisciplinary progress has broadened the definition of 'biomaterials', and a typical new insight is the concept of tissue induction biomaterials. The term 'regenerative biomaterials' and thus the contents of this article are relevant to yet beyond tissue induction biomaterials. This review summarizes the recent progress of medical materials including metals, ceramics, hydrogels, other polymers and bio-derived materials. As the application aspects are concerned, this article introduces regenerative biomaterials for bone and cartilage regeneration, cardiovascular repair, 3D bioprinting, wound healing and medical cosmetology. Cell-biomaterial interactions are highlighted. Since the global pandemic of coronavirus disease 2019, the review particularly mentions biomaterials for public health emergency. In the last section, perspectives are suggested: (i) creation of new materials is the source of innovation; (ii) modification of existing materials is an effective strategy for performance improvement; (iii) biomaterial degradation and tissue regeneration are required to be harmonious with each other; (iv) host responses can significantly influence the clinical outcomes; (v) the long-term outcomes should be paid more attention to; (vi) the noninvasive approaches for monitoring in vivo dynamic evolution are required to be developed; (vii) public health emergencies call for more research and development of biomaterials; and (viii) clinical translation needs to be pushed forward in a full-chain way. In the future, more new insights are expected to be shed into the brilliant field-regenerative biomaterials.

Intracranial In Situ Thermosensitive Hydrogel Delivery of Temozolomide Accomplished by PLGA–PEG–PLGA Triblock Copolymer Blending for GBM Treatment

Glioblastoma (GBM) recurrence after surgical excision has grown to be a formidable obstacle to conquer. In this research, biodegradable thermosensitive triblock copolymer, poly(D, L–lactic acid–co–glycolic acid)–b–poly(ethylene glycol)–b–poly(D, L–lactic acid–co–glycolic acid (PLGA–PEG–PLGA) was utilized as the drug delivery system, loading with micronized temozolomide(micro-TMZ) to form an in situ drug–gel depot inside the resection cavity. The rheology studies revealed the viscoelastic profile of hydrogel under various conditions. To examine the molecular characteristics that affect gelation temperature, ¹H–NMR, inverse gated decoupling ¹³C–NMR, and GPC were utilized. Cryo-SEM and XRD were intended to disclose the appearance of the hydrogel and the micro-TMZ existence state. We worked out how to blend polymers to modify the gelation point (T_gel) and fit the correlation between T_gel and other dependent variables using linear regression. To simulate hydrogel dissolution in cerebrospinal fluid, a membraneless dissolution approach was used. In vitro, micro-TMZ@PLGA–PEG–PLGA hydrogel exhibited Korsmeyer–Peppas and zero–order release kinetics in response to varying drug loading, and in vivo, it suppressed GBM recurrence at an astoundingly high rate. Micro-TMZ@PLGA–PEG–PLGA demonstrates a safer and more effective form of chemotherapy than intraperitoneal TMZ injection, resulting in a spectacular survival rate (40%, n = 10) that is much more than intraperitoneal TMZ injection (22%, n = 9). By proving the viability and efficacy of micro-TMZ@PLGA–PEG–PLGA hydrogel, our research established a novel chemotherapeutic strategy for treating GBM recurrence.

An injectable hemostatic PEG-based hydrogel with on-demand dissolution features for emergency care

Uncontrolled bleeding from internal noncompressible wounds is a major cause of prehospital death in military personnel and civilian populations. An ideal hemostatic sealant for emergency care should quickly control blood loss and be removed without debridement for the follow-up treatment in the operating room, yet the lack of suitable materials to meet both requirements is the bottleneck. Herein, we suggest an injectable and dissolvable hydrogel sealant for hemorrhage management of noncompressible wounds. To this end, a 4-arm poly(ethylene glycol) (PEG) crosslinker modified with thioester linkages and terminated with aldehyde groups is designed and synthesized, and to modulate the gel properties and make it suitable as a hemostatic sealant, a mixed amino component composed of poly(ethylene imine) and adipic dihydrazide is employed to react with the PEG crosslinker to form the adhesive and elastic sealant for the first time. The aldehyde groups provide the adhesion to the tissues, and the amino component affords the procoagulant ability. More importantly, the thioester moieties allow the on-demand dissolution of sealant via a thiol-thioester exchange reaction upon exposure to an exogenous thiolate solution. In the rat femoral artery puncture and liver injury models, the administration of the hydrogel sealant dramatically reduces blood loss, and its subsequent removal does not induce rebleeding. Consequently, this hydrogel sealant with the unique feature of on-demand dissolution can not only efficiently control bleeding in emergent scenarios, but also allow non-traumatic re-exposure of wounds during subsequent surgical care. STATEMENT OF SIGNIFICANCE: Sealants, adhesives or hemostatic dressings currently used in emergency situations not only require manual pressure to control bleeding, but also face removal by cutting and mechanical debridement to enable eventual surgical treatment. In this study, we design and develop an injectable and adhesive hydrogel sealant with good procoagulant capacity and on-demand dissolution feature. The application of the hydrogel sealant substantially reduces bleeding from internal noncompressible wounds without the need for direct pressure, and demonstrates for the first time that its controlled removal without debridement does not cause rebleeding. Considering that there are currently no commercial wound sealant systems with the feature of on-demand dissolution, the hydrogel sealant developed by us is expected to address an unmet clinical need.

Long-term anti-inflammatory effects of injectable celecoxib nanoparticle hydrogels for Achilles tendon regeneration

The treatment of chronic Achilles tendonitis (AT) often requires prolonged therapy and invasive therapeutic methods such as surgery or therapeutic endoscopy. To prevent the progression of chronic AT, excessive inflammation must be alleviated at an early stage. Corticosteroids or nonsteroidal anti-inflammatory drugs are generally prescribed to control inflammation; however, the high doses and long therapeutic periods required may lead to serious side effects. Herein, a local injectable poly(organophosphazene) (PPZ) - celecoxib (CXB) nanoparticle (PCNP) hydrogel system with long-term anti-inflammatory effects was developed for the treatment of tendonitis. The amphiphilic structure and thermosensitive mechanical properties of PPZ means that the hydrophobic CXB can be easily incorporated into the hydrophobic core to form PCNP at 4 °C. Following the injection of PCNP into the AT, PCNP hydrogel formed at body temperature and induced long-term local anti-inflammatory effects via sustained release of the PCNP. The therapeutic effects of the injectable PCNP system can alleviate excessive inflammation during the early stages of tissue damage and boost tissue regeneration. This study suggests that PCNP has significant potential as a long-term anti-inflammatory agent through sustained nonsteroidal anti-inflammatory drugs (NSAIDs) delivery and tissue regeneration boosting. STATEMENT OF SIGNIFICANCE: In the treatment of Achilles tendinitis, a long-term anti-inflammatory effect is needed to alleviate excessive inflammation and induce regeneration of the damaged Achilles tendon. Injectable poly(organophosphazene)(PPZ)-celecoxib(CXB) nanoparticles (PCNP) generated a long-term, localized-anti-inflammatory effect in the injected region, which successfully induced the expression of anti-inflammatory cytokines and suppressed pro-inflammatory cytokines, while the PCNPs degraded completely. Accordingly, regeneration of the damaged Achilles tendon was achieved through the long-term anti-inflammatory effect induced by a single PCNP injection. The PCNP system therefore has great potential in long-term NSAIDs delivery for various tissue engineering applications.

Drug Delivery Strategies and Biomedical Significance of Hydrogels: Translational Considerations

Hydrogels are a promising and attractive option as polymeric gel networks, which have immensely fascinated researchers across the globe because of their outstanding characteristics such as elevated swellability, the permeability of oxygen at a high rate, good biocompatibility, easy loading, and drug release. Hydrogels have been extensively used for several purposes in the biomedical sector using versatile polymers of synthetic and natural origin. This review focuses on functional polymeric materials for the fabrication of hydrogels, evaluation of different parameters of biocompatibility and stability, and their application as carriers for drugs delivery, tissue engineering and other therapeutic purposes. The outcome of various studies on the use of hydrogels in different segments and how they have been appropriately altered in numerous ways to attain the desired targeted delivery of therapeutic agents is summarized. Patents and clinical trials conducted on hydrogel-based products, along with scale-up translation, are also mentioned in detail. Finally, the potential of the hydrogel in the biomedical sector is discussed, along with its further possibilities for improvement for the development of sophisticated smart hydrogels with pivotal biomedical functions.

Sustained Delivery of SARS-CoV-2 RBD Subunit Vaccine Using a High Affinity Injectable Hydrogel Scaffold

The receptor binding domain (RBD) of severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) spike protein that mediates viral entry into host cells is a good candidate immunogen for vaccine development against coronavirus disease 2019 (COVID‐19). Because of its small size, most preclinical and early clinical efforts have focused on multimerizing RBD on various formats of nanoparticles to increase its immunogenicity. Using an easily administered injectable hydrogel scaffold that is rationally designed for enhanced retainment of RBD, an alternative and facile approach for boosting RBD immunogenicity in mice is demonstrated. Prolonged delivery of poly (I:C) adjuvanted RBD by the hydrogel scaffold results in sustained exposure to lymphoid tissues, which elicits serum IgG titers comparable to those induced by three bolus injections, but more long‐lasting and polarized toward T_H1‐mediated IgG2b. The hydrogel scaffold induces potent germinal center (GC) reactions, correlating with RBD‐specific antibody generation and robust type 1 T cell responses. Besides being an enduring RBD reservoir, the hydrogel scaffold becomes a local inflammatory niche for innate immune cell activation. Collectively, the injectable hydrogel scaffold provides a simple, practical, and inexpensive means to enhance the efficacy of RBD‐based subunit vaccines against COVID‐19 and may be applicable to other circulating and emerging pathogens.

An oxygen-enriched thermosensitive hydrogel for the relief of a hypoxic tumor microenvironment and enhancement of radiotherapy

The rapid proliferation of tumor cells and tortuous vasculature in solid tumors often bring about a hypoxic tumor microenvironment, which renders tumor cells more resistant to many cancer treatments, including radiotherapy. In this study, an injectable and thermosensitive composite hydrogel composed of perfluorooctanoic acid (PFOA) modified monomethoxy poly(ethylene glycol)-poly(D,L-lactide-co-glycolide) (mPEG-PLGA-PFOA) and perfluorooctyl bromide (PFOB) that presented a thermoreversible sol-gel transition upon heating was developed to deliver exogenous oxygen for the relief of tumor hypoxia and enhancement of radiotherapy. The fluorinated modification of copolymers significantly increased the stability of PFOB in the mPEG-PLGA-PFOA aqueous solution owing to the fluorophilic interaction between PFOB and PFOA-modified copolymers. The introduction of PFOB not only efficiently heightened the oxygen loading capacity of the composite hydrogel, but also endowed it with excellent X-ray opacity, allowing the visual observation of the hydrogel via micro-CT imaging. After peritumoral injection of the oxygen-enriched composite hydrogel, the continuous supply of oxygen effectively relieved tumor hypoxia and down-regulated the expression of hypoxia-inducible factor-1α. Profiting from this, the hyposensitivity of tumor cells to radiation was successfully reversed, and the tumor growth in mice was significantly suppressed and the survival of mice was prolonged when combined with multiple X-ray exposure. As a result, the oxygen-enriched composite hydrogel shows a great potential for radiosensitization to improve the radiotherapeutic efficacy.

PEG-based thermosensitive and biodegradable hydrogels

Injectable thermosensitive hydrogels are free-flowing polymer solutions at low or room temperature, making them easy to encapsulate the therapeutic payload or cells via simply mixing. Upon injection into the body, in situ forming hydrogels triggered by body temperature can act as drug-releasing reservoirs or cell-growing scaffolds. Finally, the hydrogels are eliminated from the administration sites after they accomplish their missions as depots or scaffolds. This review outlines the recent progress of poly(ethylene glycol) (PEG)-based biodegradable thermosensitive hydrogels, especially those composed of PEG-polyester copolymers, PEG-polypeptide copolymers and poly(organophosphazene)s. The material design, performance regulation, thermogelation and degradation mechanisms, and corresponding applications in the biomedical field are summarized and discussed. A perspective on the future thermosensitive hydrogels is also highlighted. STATEMENT OF SIGNIFICANCE: Thermosensitive hydrogels undergoing reversible sol-to-gel phase transitions in response to temperature variations are a class of promising biomaterials that can serve as minimally invasive injectable systems for various biomedical applications. Hydrophilic PEG is a main component in the design and fabrication of thermoresponsive hydrogels due to its excellent biocompatibility. By incorporating hydrophobic segments, such as polyesters and polypeptides, into PEG-based systems, biodegradable and thermosensitive hydrogels with adjustable properties in vitro and in vivo have been developed and have recently become a research hotspot of biomaterials. The summary and discussion on molecular design, performance regulation, thermogelation and degradation mechanisms, and biomedical applications of PEG-based thermosensitive hydrogels may offer a demonstration of blueprint for designing new thermogelling systems and expanding their application scope.

Injectable and thermosensitive hydrogels mediating a universal macromolecular contrast agent with radiopacity for noninvasive imaging of deep tissues

It is very challenging to visualize implantable medical devices made of biodegradable polymers in deep tissues. Herein, we designed a novel macromolecular contrast agent with ultrahigh radiopacity (iodinate content > 50%) via polymerizing an iodinated trimethylene carbonate monomer into the two ends of poly(ethylene glycol) (PEG). A set of thermosensitive and biodegradable polyester-PEG-polyester triblock copolymers with varied polyester compositions synthesized by us, which were soluble in water at room temperature and could spontaneously form hydrogels at body temperature, were selected as the demonstration materials. The addition of macromolecular contrast agent did not obviously compromise the injectability and thermogelation properties of polymeric hydrogels, but conferred them with excellent X-ray opacity, enabling visualization of the hydrogels at clinically relevant depths through X-ray fluoroscopy or Micro-CT. In a mouse model, the 3D morphology of the radiopaque hydrogels after injection into different target sites was visible using Micro-CT imaging, and their injection volume could be accurately obtained. Furthermore, the subcutaneous degradation process of a radiopaque hydrogel could be non-invasively monitored in a real-time and quantitative manner. In particular, the corrected degradation curve based on Micro-CT imaging well matched with the degradation profile of virgin polymer hydrogel determined by the gravimetric method. These findings indicate that the macromolecular contrast agent has good universality for the construction of various radiopaque polymer hydrogels, and can nondestructively trace and quantify their degradation in vivo. Meanwhile, the present methodology developed by us affords a platform technology for deep tissue imaging of polymeric materials.

Sustained Release Systems for Delivery of Therapeutic Peptide/Protein

Peptide/protein therapeutics have been significantly applied in the clinical treatment of various diseases such as cancer, diabetes, etc. owing to their high biocompatibility, specificity, and therapeutic efficacy. However, due to their immunogenicity, instability stemming from its complex tertiary and quaternary structure, vulnerability to enzyme degradation, and rapid renal clearance, the clinical application of protein/peptide therapeutics is significantly confined. Though nanotechnology has been demonstrated to prevent enzyme degradation of the protein therapeutics and thus enhance the half-life, issues such as initial burst release and uncontrollable release kinetics are still unsolved. Moreover, the traditional administration method results in poor patient compliance, limiting the clinical application of protein/peptide therapeutics. Exploiting the sustained-release formulations for more controllable delivery of protein/peptide therapeutics to decrease the frequency of injection and enhance patient compliance is thus greatly meaningful. In this review, we comprehensively summarize the substantial advancements of protein/peptide sustained-release systems in the past decades. In addition, the advantages and disadvantages of all these sustained-release systems in clinical application together with their future challenges are also discussed in this review.

Exploration of possible cell chirality using material techniques of surface patterning

Consistent left-right (LR) asymmetry or chirality is critical for embryonic development and function maintenance. While chirality on either molecular or organism level has been well established, that on the cellular level has remained an open question for a long time. Although it remains unclear whether chirality exists universally on the cellular level, valuable efforts have recently been made to explore this fundamental topic pertinent to both cell biology and biomaterial science. The development of material fabrication techniques, surface patterning, in particular, has afforded a unique platform to study cell-material interactions. By using patterning techniques, chirality on the cellular level has been examined for cell clusters and single cells in vitro in well-designed experiments. In this review, we first introduce typical fabrication techniques of surface patterning suitable for cell studies and then summarize the main aspects of preliminary evidence of cell chirality on patterned surfaces to date. We finally indicate the limitations of the studies conducted thus far and describe the perspectives of future research in this challenging field. STATEMENT OF SIGNIFICANCE: While both biomacromolecules and organisms can exhibit chirality, it is not yet conclusive whether a cell has left-right (LR) asymmetry. It is important yet challenging to study and reveal the possible existence of cell chirality. By using the technique of surface patterning, the recent decade has witnessed progress in the exploration of possible cell chirality within cell clusters and single cells. Herein, some important preliminary evidence of cell chirality is collected and analyzed. The open questions and perspectives are also described to promote further investigations of cell chirality in biomaterials.

Regulation of Blood Glucose Using Islets Encapsulated in a Melanin-Modified Immune-Shielding Hydrogel

Islet transplantation is currently a promising treatment for type 1 diabetes mellitus. However, the foreign body reaction and retrieval difficulty often lead to transplantation failure and hinder the clinical application. To address these two challenges, we propose a balanced charged sodium alginate-polyethyleneimine-melanin (SA-PEI-Melanin) threadlike hydrogel with immune shielding and retrievable properties. The attractiveness of this study lies in that the introduction of melanin can stimulate insulin secretion, especially under near-infrared (NIR) irradiation. After demonstrating a good immune-shielding effect, we performed an in vivo transplantation experiment. The results showed that the blood glucose level in the SA-PEI-Melanin group was stably controlled below the diabetic blood glucose criterion, and this blood glucose level could be further adjusted after NIR irradiation. In addition, the evaluation after retrieving the SA-PEI-Melanin hydrogel indicated that the islets still maintained a normal physiological function, further proving its excellent immunological protection. This study provides a new approach for the accurate regulation of blood glucose in patients with type 1 diabetes mellitus and contributes to developing a promising transplant system to reconcile real-time and precise light-defined insulin secretion regulation.

Poly ethylene glycol (PEG)-Related controllable and sustainable antidiabetic drug delivery systems

Diabetes mellitus is one of the most challenging threats to global public health. To improve the therapy efficacy of antidiabetic drugs, numerous drug delivery systems have been developed. Polyethylene glycol (PEG) is a polymeric family sharing the same skeleton but with different molecular weights which is considered as a promising material for drug delivery. In the delivery of antidiabetic drugs, PEG captures much attention in the designing and preparation of sustainable and controllable release systems due to its unique features including hydrophilicity, biocompatibility and biodegradability. Due to the unique architecture, PEG molecules are also able to shelter delivery systems to decrease their immunogenicity and avoid undesirable enzymolysis. PEG has been applied in plenty of delivery systems such as micelles, vesicles, nanoparticles and hydrogels. In this review, we summarized several commonly used PEG-contained antidiabetic drug delivery systems and emphasized the advantages of stimuli-responsive function in these sustainable and controllable formations.

Sustained intrathecal delivery of amphotericin B using an injectable and biodegradable thermogel

Cryptococcal meningitis is a fungal infectious disease with a poor prognosis and high mortality. Amphotericin B (AMB) is the first choice for the treatment of cryptococcal meninges. The blood-brain barrier (BBB) is the major barrier for the effective delivery of drugs to the brain. In this study, AMB was incorporated in a thermosensitive gel for intrathecal injection. We first synthesized AMB-loaded thermogel, investigated its in vitro cumulative release, and in vivo neurotoxicity, and therapeutic effect. The thermosensitive gel was comprised of 25 wt% poly (lactic acid-co-glycolic acid)-poly (ethylene glycol)-poly (lactic acid-co-glycolic acid) (PLGA-PEG-PLGA) triblock polymer aqueous solution. The AMB loaded in the thermosensitive gel (AMB in gel) had low viscosity at low temperature and resulted in the formation of a non-flowing gel at 37 °C (physiological temperature). AMB loading in gel sustained its release for 36 days and the in vitro cumulative release rate was satisfactory. Compared with the AMB solution, intrathecal administration of AMB in gel could reduce the neurovirulence of AMB and get a better treatment effect. The findings of the current study show that the injectable PLGA–PEG–PLGA thermogel is a biocompatible carrier for the delivery of drugs into the intrathecal.

Advances in Subcutaneous Delivery Systems of Biomacromolecular Agents for Diabetes Treatment

Diabetes mellitus is a major threat to human health. Both its incidence and prevalence have been rising steadily over the past few decades. Biomacromolecular agents such as insulin and glucagon-like peptide 1 receptor agonists are commonly used hypoglycemic drugs that play important roles in the treatment of diabetes. However, their traditional frequent administration may cause numerous side effects, such as pain, infection or local tissue necrosis. To address these issues, many novel subcutaneous delivery systems have been developed in recent years. In this review, we survey recent developments in subcutaneous delivery systems of biomacromolecular hypoglycemic drugs, including sustained-release delivery systems and stimuli-responsive delivery systems, and summarize the advantages and limitations of these systems. Future opportunities and challenges are discussed as well.

Recent advances of nanomedicine-based strategies in diabetes and complications management: Diagnostics, monitoring, and therapeutics

Diabetes mellitus (DM) is a metabolic disorder characterized by the presence of chronic hyperglycemia driven by insulin deficiency or resistance, imposing a significant global burden affecting 463 million people worldwide in 2019. This review has comprehensively summarized the application of nanomedicine with accurate, patient-friendly, real-time properties in the field of diabetes diagnosis and monitoring, and emphatically discussed the unique potential of various nanomedicine carriers (e.g., polymeric nanoparticles, liposomes, micelles, microparticles, microneedles, etc.) in the management of diabetes and complications. Novel delivery systems have been developed with improved pharmacokinetics and pharmacodynamics, excellent drug biodistribution, biocompatibility, and therapeutic efficacy, long-term action safety, as well as the improved production methods. Furthermore, the effective nanomedicine for the treatment of several major diabetic complications with significantly improved life qualities of diabetic patients were discussed in detail. Going through the literature review, several critical issues of the nanomedicine-based strategies applications need to be addressed such as stabilities and long-term safety effects in vivo, the deficiency of standard for formulation administration, feasibility of scale-up, etc. Overall, the review provides an insight into the design, advantages and limitations of novel nanomedicine application in the diagnostics, monitoring, and therapeutics of DM.

Composite Hydrogel of Methacrylated Hyaluronic Acid and Fragmented Polycaprolactone Nanofiber for Osteogenic Differentiation of Adipose-Derived Stem Cells

Composite hydrogels with electrospun nanofibers (NFs) have recently been used to mimic the native extracellular matrix. In this study, composite hydrogels of methacrylated hyaluronic acid containing fragmented polycaprolactone NFs were used for bone tissue engineering. The composite (NF/hydrogel) was crosslinked under ultraviolet (UV) light. The incorporation of fragmented polycaprolactone NFs increased the compression modulus from 1762.5 to 3122.5 Pa. Subsequently, adipose-derived stem cells incorporated into the composite hydrogel exhibited a more stretched and elongated morphology and osteogenic differentiation in the absence of external factors. The mRNA expressions of osteogenic biomarkers, including collagen 1 (Col1), alkaline phosphatase, and runt-related transcription factor 2, were 3-5-fold higher in the composite hydrogel than in the hydrogel alone. In addition, results of the protein expression of Col1 and alizarin red staining confirmed osteogenic differentiation. These findings suggest that our composite hydrogel provides a suitable microenvironment for bone tissue engineering.

Glucose- and pH-Responsive Supramolecular Polymer Vesicles Based on Host-Guest Interaction for Transcutaneous Delivery of Insulin

Smart insulin delivery platforms having the ability of mimicking pancreatic cells are highly expected for diabetes treatment. Herein, a smart glucose-sensitive insulin delivery platform on the basis of transcutaneous microneedles has been designed. The as-prepared microneedles are composed of glucose- and pH-responsive supramolecular polymer vesicles (PVs) as the drug storage and water soluble polymers as the matrix. The well-defined PVs are constructed from the host-guest inclusion complex between water-soluble pillar[5]arene (WP5) with pH-responsiveness and paraquat-ended poly(phenylboronic acid) (PPBA-G) with glucose-sensitivity. The drug-loaded PVs, including insulin and glucose oxidase (GOx) can quickly respond to elevated glucose level, accompanied by the disassociation of PVs and fast release of encapsulated insulin. Moreover, the insulin release rate is further accelerated by GOx, which generates gluconic acid at high glucose levels, thus decreasing the local pH. Therefore, the host-guest interaction between WP5 and PPBA-G is destroyed and a total structure disassociation of PVs takes place, contributing to a fast release of encapsulated insulin. The in vivo insulin delivery to diabetic rats displays a quick response to hyperglycemic levels and then can fast regulate the blood glucose concentrations to normal levels, which demonstrates that the obtained smart insulin device has a highly potential application in the treatment of diabetes.

An injectable thermosensitive hydrogel loaded with an ancient natural drug colchicine for myocardial repair after infarction

Localized administration of anti-inflammatory agents benefits patients after myocardial infarction (MI) by repressing/modulating inflammatory response of the MI region and thus accelerating repair of the impaired tissues. Colchicine (Col), an ancient natural drug, has excellent anti-inflammatory effects; however, its utilization is strictly limited due to its severe systemic toxicity and narrow therapeutic window. In this study, we developed an intramyocardial delivery system of Col using an injectable, thermosensitive poly(lactide-co-glycolide)-poly(ethylene glycol)-poly(lactide-co-glycolide) (PLGA-PEG-PLGA) polymer hydrogel as the vehicle for the treatment of MI while minimizing its systemic toxicity. The aqueous PLGA-PEG-PLGA solution loaded with Col (Col@Gel) underwent a sol-gel transition at 35 °C and maintained a gel state at body temperature. Col was released from the Col@Gel in an initial burst followed by a sustained release manner for over 8 days. The in vitro cell tests showed that the Col@Gel system significantly inhibited macrophage proliferation and migration. In a mouse model of MI, a single intramyocardial administration of the Col@Gel effectively alleviated cardiac inflammation, inhibited myocardial apoptosis and fibrosis, improved cardiac function and structure, and increased mouse survival without inducing severe systemic toxicity, which was observed following intraperitoneal administration of Col solution. These results suggested that the Col@Gel system is a reliable drug delivery system for the sustained local release of Col and has great potential as an anti-inflammatory therapy for the treat of MI.