Investigation into the Enhanced Catalytic Oxidation of o-Xylene over MOF-Derived Co3O4 with Different Shapes: The Role of Surface Twofold-Coordinate Lattice Oxygen (O2f)

Oxygen vacancies-mediated the peracetic acid activation to selectively generate 1O2 for water decontamination

As a pre-oxidation unit, developing non-radical pathway-dominant advanced oxidation processes (AOPs) with remarkably-efficient oxidation, superior environmental robustness, and ecological safety is essential in actual water pollution control. Herein, using Co3O4 as an example, we present an oxygen vacancies (OVs)-mediated peracetic acid (PAA) activation process, thereby predominantly generating singlet oxygen (1O2) for degrading contaminants. In-situ monitoring of PAA activation by OVs-rich Co3O4 (Co3O4-OVs) reveals that surface oxygen-containing intermediates (e.g., *OH and *O) are the precursors of 1O2. Theoretical calculations show that the selective adsorption of terminal oxygen atoms (ATO) in PAA serves as an activity descriptor for 1O2 generation. OVs can induce electron redistribution, triggering the ATO-dominated PAA adsorption to form the Co3O4-OVs-PAA* complex, followed by O-O bond breakage to yield *OH. Concurrently, OVs modulate the Co d-band center, lowering the energy barrier for 1O2 formation. The system enables ultra-fast catalytic performance (kobs = 1.17 min-1) for degrading sulfamethoxazole, outperforming pristine Co3O4 by 11.64-fold. The high-selectivity towards non-radical pathway endows the Co3O4-OVs/PAA system with remarkable stability in complex environment backgrounds and continuous-flow microreactor. This work not only provides a broad perspective on the modulation of non-radical pathways via defect engineering, but also advances the development of PAA-based AOPs for water decontamination.

Promoting Low-Temperature Toluene Oxidation via Pt-O-Fe Interfacial Sites in a Pt/CuO-Fe3O4 Catalyst

Electronic metal-support interaction (EMSI) has been widely explored in the catalytic degradation of volatile organic compounds (VOCs) owing to the formation of special interfacial sites. Herein, the EMSI effect was engineered by constructing the serial Pt catalysts supported on CuO-Fe3O4 bimetal oxide (Pt/CFO). Among them, the 0.5Pt/CFO catalyst with 0.5 wt % Pt loading exhibited an outstanding catalytic activity, with T90 (the temperature of 90% toluene conversion) lowered to 185 °C, and displayed excellent stability and water resistance. Comprehensive physicochemical characterizations revealed that an evident electron transfer occurred via the interface structure (Pt-O-Fe), producing the positively charged Pt (Ptδ+) and abundant Fe2+ species. Notably, the increased electron density around the Fe species weakened the Fe-O bond and thus activated the surface lattice oxygen (Olatt). Further, temperature-programmed desorption experiments and in situ diffuse reflectance infrared Fourier transform spectroscopy results demonstrated that the electron-deficient Ptδ+ was conducive to the adsorption and activation of toluene at low temperature. Consequently, the deep oxidation of toluene was achieved with the participation of Olatt, benefiting from the Ptδ+-O-Fe2+ interfacial sites with synergistic catalysis for toluene adsorption and oxygen activation. This work provides an interesting idea to explore the relationship between the electron transfer effect and highly efficient VOC abatement.

Increasing the Surface Activity of 2D Ultrathin Co3O4 by Indium Doping for TEA Sensing

Optimizing and improving the surface activity of Co3O4 sensing materials are crucial for applications in triethylamine detection. Herein, indium-doped Co3O4 hollow microflowers (InCo HMfs), assembled from ultrathin nanosheets, were prepared via a hydrolysis reaction. Three distinct crystal facets─{1 1 0}, {1 1 1}, and {0 0 1}─were observed in 2-InCo HMfs. Results from TEM, XPS, and XAS characterization show that the increase of Co2+ content induced by indium doping promotes the formation of highly active crystal planes in Co3O4. DFT calculations revealed the reasons for the improvement in the gas sensing performance of 2-InCo HMfs and the multiple effects of In ions. Our dual strategy of doping with indium and hydrolysis markedly improved the intrinsic TEA sensing performance of Co3O4, offering a novel avenue for designing high-performance TEA sensors.

Engineering oxygen vacancies in acid-etched MgMn2O4 for efficiently catalytic benzene combustion: Synergistic activation of gaseous oxygen and surface lattice oxygen

The synergistic activation of gaseous oxygen and surface lattice oxygen is essential for designing highly efficient catalysts to eliminate VOCs. Herein, an effective acid treatment was carried out to create more oxygen vacancies by modulating the electronic structure of MgMn2O4 spinels and MgMnOx mixed oxides. The acid-treated MgMn2O4 exhibited outstanding catalytic performance, with the reaction rate of benzene rising by 8.55 times at 200 °C. After acid treatment, MgMn2O4 partially retained its spinel structure, while Mn2O3 in situ grew on the surface due to the selective removal of Mg2+. The transformation of Mn-O-Mg into Mn-O weakened the strength of adjacent Mn-O bonds, thereby promoting the release of surface lattice oxygen and the regeneration of oxygen vacancies. In addition, acid-treated MgMn2O4 facilitated the adsorption and activation of gaseous oxygen. In situ DRIFTS analysis proved that the synergistic activation of gaseous oxygen and surface lattice oxygen accelerated the conversion of intermediates, thus contributing to the efficient degradation of benzene.

Unveiling the critical role of surface adsorbed oxygen species for efficiently photothermocatalytic oxidation of VOCs: Replenishing the active surface lattice oxygen sites

Surface oxygen species play a crucial role in the photothermocatalytic oxidation of volatile organic compounds (VOCs), but their exact functions and evolutionary processes remain unclear. Herein, a series of spinel CoxMn3-xO4 catalysts are synthesized and employed for photothermocatalytic oxidation of toluene. Co1.5Mn1.5O4 catalysts achieve 91.6 % toluene degradation and 81.2 % CO2 yield in a continuous flow reaction under 400 mW/cm2 light intensity, as well as remarked stability and water resistance. During the reaction, surface lattice oxygen on CoxMn3-xO4 serves as the active sites, directly participating in the oxidation of VOCs. The replenishment pathway of surface lattice oxygen is investigated through a series of designed in situ experiments, revealing O2 molecules adsorbed on the catalyst surface to be O2- species, which are then activated to O- species via increase in temperature. The active O- species effectively replenish the consumed surface lattice oxygen species, facilitating subsequent oxidation reactions. This study provides valuable insight into the replenishment mechanism of surface lattice oxygen during oxidation of VOCs.

Revealing the key role of interfacial oxygen activation over CoMn2O4@MnO2 in the catalytic oxidation of acetone

The accumulation of intermediate products on the catalyst surface caused by insufficient oxygen activity is an important reason for the poor activity of catalysts towards oxygenated volatile organic compounds (OVOCs). CoMn2O4@MnO2 heterogeneous catalysts were fabricated to decipher the interfacial oxygen activation mechanism for efficient acetone oxidation. Experimental and theoretical explorations revealed that oxygen vacancies were easily formed at the interface. Gaseous oxygen tended to adsorb on the interfacial vacancies while bonding with adjacent Mn sites, resulting in the stretching of O-O bonds. Rapid electron transfer at the interface led to the charge accumulation on the two oxygen atoms inducing electrostatic repulsion. These factors are conducive to the O-O bond breaking and gaseous oxygen activation. The obtained CoMn2O4@0.8MnO2 exhibited excellent catalytic performance with 90 % of acetone conversion at 159 °C, better than CoMn2O4 and MnO2. The acetone oxidation on CoMn2O4@0.8MnO2 not only avoided the accumulation of aldehydes, but also realized the rapid degradation of acetate into formate, achieving the shortest degradation pathway due to the rapid interfacial oxygen activation. CoMn2O4@0.8MnO2 also exhibited better catalytic activity for other OVOCs (ethyl acetate, ethylene oxide, methanol). This work provides new insights for the mechanism of interfacial oxygen activation and the design of heterogeneous catalyst for efficient OVOC oxidation.

Influence of atomic coordination on the activity of lattice oxygen and catalytic oxidation of toluene over regular Cu2O crystalline

VOCs oxidation over transition metal catalyst is commonly understood via the Mars-van Krevelen mechanism involving the crucial role of lattice oxygen (OL) activity, however, how it is influenced by atomic coordination is still unclear. Herein, we use model catalysts of Cu2O-cub, Cu2O-oct and Cu2O-dod with crystal planes of (100), (111) and (110), respectively, to investigate the OL activity and catalytic oxidation of toluene. The activity of Cu2O-oct is found to be the highest, followed by Cu2O-cub and Cu2O-dod. Experiments results combined with density functional theory show that, although low di-coordinated O atoms leads to the lowest surface oxygen vacancy formation energy (2.47 eV) and the highest surface OL activity of Cu2O-cub, it cannot determine the activity. The lowest bulk oxygen vacancy formation energy (3.16 eV) in Cu2O-oct terminated with tri-coordinated O atoms and open surface can accelerate the migration and replenishment of OL, thereby promoting the catalytic activity.

Boosting chlorobenzene oxidation over MIL-101(Cr) derived CrOx catalysts: The stepwise regulation of CrOx clusters and oxygen species by calcination atmospheres

In this work, CrOx catalysts derived from MIL-101(Cr) were prepared for the oxidation of chlorobenzene (CB). The atmosphere of calcination had great effect on the physical and chemical properties of the catalysts. Only the atmosphere of Ar could carbonize and preserve the organic ligands in the structure, retaining the micropore structure and high surface area of MIL-101(Cr). Therefore, the aggregation of CrOx clusters was prevented, forming abundant coordinative unsaturated Cr3+ and oxygen vacancies. They would transform to abundant Cr6+ as the active sites in the treatment of 10 %O2/Ar, and acid sites composed with OH and surface adsorbed oxygen were formed around Cr6+, which played an important role on the adsorption/activation of CB and the oxidation of the intermediates. Through the oxygen vacancies, the surface lattice oxygen could migrate and replenish the oxygen consumed around Cr6+. Thus, MIL-101(Cr)-Ar-T, synthesized by MIL-101(Cr) stepwise calcined in Ar and treatment of 10 %O2/Ar, exhibited the highest catalytic activity for CB oxidation with the T90 at 233 °C, and the selectivity to COx and HCl at 240 °C could reach 95.85 % and 97.61 %, respectively, with a high stable performance in the 5-day catalytic activity test.

Insight into the Synergistic Effect of Binary Nonmetallic Codoped Co3O4 Catalysts for Efficient Ethyl Acetate Degradation under Humid Conditions

The synthesis of high-performance catalysts for volatile organic compounds (VOCs) degradation under humid conditions is essential for their practical industrial application. Herein, a codoping strategy was adopted to synthesize the N-Co3O4-C catalyst with N, C codoping for low-temperature ethyl acetate (EA) degradation under humid conditions. Results showed that N-Co3O4-C exhibited great catalytic activity (T 90 = 177 °C) and water resistance (5.0 vol% H2O, T 90 = 178 °C) for EA degradation. Characterization results suggested that the C, N codoping weakened the Co-O bond strength, increased surface Co3+ and Oads species, and improved the low-temperature redox ability and the mobility of lattice oxygen species, which boosted the catalytic performance of N-Co3O4-C for EA degradation. Meanwhile, the N-doping-induced oxygen vacancies could interact with water vapor to generate extra active oxygen species, which enhanced the water resistance. Importantly, based on a series of characterization technologies, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and theoretical calculations, the synergistic effect of C, N codoping was systematically investigated and elucidated. The C doping induced the increase of surface area and the weakening of Co-O bond strength, which improved EA adsorption and lattice oxygen species activation to dissociate and oxidize EA, forming the key intermediate, acetate acid. N doping enhanced the adsorption and activation of gaseous oxygen species to form active oxygen species, attacking and breaking the C-C bond in acetate acid to accelerate EA deep oxidation, which synergistically facilitated EA degradation.

Recent Advances of the Effect of H2O on VOC Oxidation over Catalysts: Influencing Factors, Inhibition/Promotion Mechanisms, and Water Resistance Strategies

Water vapor is a significant component in real volatile organic compounds (VOCs) exhaust gas and has a considerable impact on the catalytic performance of catalysts for VOC oxidation. Important progress has been made in the reaction mechanisms of H2O and water resistance strategies for VOC oxidation in recent years. Despite advancements in catalytic technology, most catalysts still exhibit low activity under humid conditions, presenting a challenge in reducing the adverse effects of H2O on VOC oxidation. To develop water-resistant catalysts, understanding the mechanistic role of H2O and implementing effective water-resistance strategies with influencing factors are imperative. This Perspective systematically summarizes related research on the impact of H2O on VOC oxidation, drawing from over 390 papers published between 2013 and 2024. Five main influencing factors are proposed to clarify their effects on the role of H2O. Five inhibition/promotion mechanisms of H2O are introduced, elucidating their role in the catalytic oxidation of various VOCs. Additionally, different kinds of water resistance strategies are discussed, including the fabrication of hydrophobic materials, the design of specific structures and morphologies, and the introduction of additional elements for catalyst modification. Finally, scientific challenges and opportunities for enhancing the design of efficient and water-resistant catalysts for practical applications in VOC purification are highlighted.

Tunable heteroassembly of 2D CoNi LDH and Ti3C2 nanosheets with enhanced electrocatalytic activity for oxygen evolution

The sluggish kinetics of the oxygen evolution reaction (OER) is the bottleneck to developing hydrogen energy based on water electrolysis, which can be significantly improved using high performance catalysts. In this context, CoNi layered double hydroxide (LDH)/Ti3C2 heterostructures are obtained using electrostatic attraction of the positively charged LDH and negatively charged Ti3C2 nanosheets as the catalyst to optimize the OER performance. Such alternate stacking exhibits good catalytic activity with a lower overpotential and a small Tafel slope, outperforming their individual components. The results of density functional theory (DFT) simulation show that the charge transfers from Ti3C2 to CoNi LDH not only adjust the electron distribution, but also increase the electron density of the interfacial active sites, thus enhancing the electron transfer efficiency inside the heterostructures. Moreover, the cobalt and nickel ions exhibit a synergistic effect in supplying more electrons to adsorb the adjacent intermediates with active hydrogen and oxygen vacancies, to improve the adsorption capability and to reduce the reaction energy barriers. These findings provide a rewarding avenue towards the design of highly efficient electrocatalysts for OER.

Hybrid Metal-Organic Frameworks (MOFs) for Various Catalysis Applications

Porous materials have been gaining popularity in catalysis applications, solving the current ecological challenges. Metal-organic frameworks (MOFs) are especially noteworthy for their high surface areas and customizable chemistry, giving them a wide range of potential applications in catalysis remediation. The review study delves into the various applications of MOFs in catalysis and provides a comprehensive summary. This review thoroughly explores MOF materials, specifically focusing on their diverse catalytic applications, including Lewis catalysis, oxidation, reduction, photocatalysis, and electrocatalysis. Also, this study emphasizes the significance of high-performance MOF materials, which possess adjustable properties and exceptional features, as a novel approach to tackling technological challenges across multiple sectors. MOFs make it an ideal candidate for catalytic reactions, as it enables efficient conversion rates and selectivity. Furthermore, the tunable properties of MOF make it possible to tailor its structure to suit specific catalytic requirements. This feature improves performance and reduces costs associated with traditional catalysts. In conclusion, MOF materials have revolutionized the field of catalysis and offer immense potential in solving various technological challenges across different industries.

Spinel-Based Catalysts That Enable Catalytic Oxidation of Volatile Organic Compounds

Volatile organic compounds (VOCs) have caused serious harm to human health and ecological environment, and have received much attention in recent years. Despite the successful applications of catalytic combustion of VOCs as the core technology of VOCs removal in industry, the development of efficient catalysts that can mineralize VOCs into nontoxic CO2 and H2O at low temperatures remains a great challenge. Recent studies show that spinel-based materials as efficient catalysts were extensively used in the catalytic oxidation VOCs field due to their synergistic effect, manifold compositions, and electron configurations. However, most of the pollutants are complex, consisting of multiple VOCs, water vapor, CO2, SO2 and other substances, which presents a significant challenge in constructing highly active and stable catalysts. To meet the future demand for efficient catalysts capable of removing various types of VOCs, it is urgent to rationally design and scientifically prepare spinel catalysts based on existing knowledge. This work reviews the research and development of various spinel catalysts with an emphasis on their catalytic performance in VOCs oxidation. The catalytic performance of spinel-based catalysts for different sorts of VOCs was summarized and compared. Moreover, the effects of the reaction conditions on the catalytic performance of spinel-based catalysts were examined to accommodate complicated operating conditions. Subsequently, the regulation of spinel oxides in structure and defect was coherently reviewed to guide the development and design of efficient catalysts. Especially, the research techniques for the reaction mechanism over spinel catalysts were displayed to better deepen the understanding of catalytic oxidation of VOCs. Finally, the current development and challenges were proposed and put forward for future research. This review provided a systematic understanding of the VOCs oxidation over spinel-based catalysts and offered guidance for the development of high-performance catalysts for VOCs elimination.

Synthesis and Optimization of Foam Copper-Based CoMnOx@Co3O4/CF Catalyst: Achieving Efficient Catalytic Oxidation of Paraxylene

This study successfully developed a foam copper (CF)-based CoMnOx@Co3O4/CF composite catalyst, achieving efficient thermal catalytic oxidation of paraxylene through multifactor optimization of synthesis conditions. At a Co:Mn molar ratio of 2:1 and a calcination temperature of 450 °C, the catalyst exhibited outstanding catalytic performance, with a T90 temperature as low as 246 °C, significantly lower than that of catalysts synthesized under other conditions. Additionally, BET, XPS, Raman, EPR, and H2-TPR test results indicate that the catalyst possesses a high specific surface area, abundant oxygen vacancies, a distribution of multivalent Co and Mn species, and a lower hydrogen reduction temperature, all of which contribute to the high catalytic activity of CoMnOx@Co3O4/CF. Furthermore, in situ DRIFTS confirmed that the oxidation of paraxylene on CoMnOx@Co3O4/CF follows the Mars-Van Krevelen (MvK) mechanism. The proposed reaction pathway begins with the oxidation of the methyl group on paraxylene, followed by the opening of the benzene ring and further oxidation to CO2 and H2O. The innovative structural design and excellent catalytic performance of this catalyst provide new insights and solutions for the industrial treatment of VOCs.

Boosted 1,2-Dichloroethane Deep Destruction over CoRu/Al2O3 Bifunctional Catalysts via Surface Oxygen and Water Molecule Synergistic Activation

Developing efficacious catalysts with superior Cl resistance and polychlorinated byproduct inhibition capability is crucial for realizing the environmentally friendly purification of chlorinated volatile organic compounds (CVOCs). Activating CVOC molecules and desorbing Cl species by modulating the metal-oxygen property is a promising strategy to fulfill these. Herein, a bifunctional CoRu/Al2O3 catalyst with synergistic Co and Ru interactions (Ru-O-Co species) was rationally fabricated, which possesses abundant surface Co2+ and Ruδ+ sites and collaboratively facilitates the activation of lattice oxygen (O2-) and molecular oxygen (O2 → O2- → O-), accelerating 1,2-dichloroethane (1,2-DCE) decomposition via the reaction route of enolic species → aldehydes → carboxylate/carbonate. Furthermore, CoRu/Al2O3 stimulates 1,2-DCE oxidation under humid conditions as H2O molecules can be easily activated to active *OH (potential oxidizing agent) over Ru species, accelerating C-Cl dissociation and Cl desorption and promoting the transformation of catecholate-type (C═O) species to easily oxidizable carboxylic acid (COOH) species, remarkably suppressing the formation of hazardous CCl4 and CHCl2CH2Cl. This study provides critical insights into the development of bifunctional catalysts to synergistically activate surface oxygen species and H2O molecules for industrial CVOC stable and efficient elimination.

Construction of hollow sphere MnOX with abundant oxygen vacancy for accelerating VOCs degradation: Investigation through operando spectroscopycombined with on-line mass spectrometry

To clarify the key role of oxygen vacancy defects on enhancing the oxidative activity of the catalysts, metal-organic frameworks (MOFs) derived MnOX catalysts with different morphologies and oxygen vacancy defects were successfully prepared using a facile in-situ self-assembly strategy with different alkali moderators. The obtained morphologies included three-dimensional (3D) triangular cone stacked MnOX hollow sphere (MnOX-H) and 3D nanoparticle stacked MnOX nanosphere (MnOX-N). Compared to MnOX-N, MnOX-H exhibited higher activity for the oxidation of toluene (T90 = 226 °C). This was mainly due to the large number of oxygen vacancy defects and Mn4+ species in the MnOX-H catalyst. In addition, the hollow structure of MnOX-H not only facilitated toluene adsorption and activation of toluene and also provided more active sites for toluene oxidation. Reaction mechanism studies showed that the conversion of toluene to benzoate could be realized over MnOX-H catalyst during toluene adsorption at room temperature. In addition, abundant oxygen vacancy defects can accelerate the activated oxidation of toluene and the formation of oxidation products during toluene oxidation.

Unravelling High Water Vapor-Induced Inhibitory Effects on Pt/Co3O4 Catalysts toward Benzene Oxidation

Water vapor inevitably exists in the environment, which causes adverse impacts on many crucial chemical reactions. However, high water vapor of up to 10 vol %─relevant to a broad spectrum of industrial practices-for catalytic implications has been less investigated or neglected. As such, we explored an industry-relevant, humidity-highly sensitive benzene oxidation only in the presence of 10 vol % water vapor using the well-established Pt/Co3O4 catalysts, to bring such an important yet ignored topic to the forefront. Results revealed that Pt/Co3O4 catalysts possessing higher contents of Pt nanoparticles exhibited marked tolerance to water vapor interference. Under an incomplete benzene conversion condition, the input of 10 vol % water vapor indeed impaired the catalytic performance of Pt/Co3O4 catalyst significantly, which, in fact, was caused by the unfavorable formation of carboxylate species covering the catalyst's surface engendering irrecoverable activity loss, instead of the well-accepted water competitive adsorption. While such activity loss can be restored by elevating the reaction to a higher temperature. This study helps us to understand the compromised catalytic activity caused by high humidity, urging the systematic evaluation of well-established catalyst systems in high water vapor-contained conditions and pressing the development of water-tolerant catalysts for real-life application consideration.

The influence of crystal facet on the catalytic performance of MOFs-derived NiO with different morphologies for the total oxidation of propane: The defect engineering dominated by solvent regulation effect

Crystal facet and defect engineering are crucial for designing heterogeneous catalysts. In this study, different solvents were utilized to generate NiO with distinct shapes (hexagonal layers, rods, and spheres) using nickel-based metal-organic frameworks (MOFs) as precursors. It was shown that the exposed crystal facets of NiO with different morphologies differed from each other. Various characterization techniques and density functional theory (DFT) calculations revealed that hexagonal-layered NiO (NiO-L) possessed excellent low-temperature reducibility and oxygen migration ability. The (111) crystal plane of NiO-L contained more lattice defects and oxygen vacancies, resulting in enhanced propane oxidation due to its highest O2 adsorption energy. Furthermore, the higher the surface active oxygen species and surface oxygen vacancy concentrations, the lower the C-H activation energy of the NiO catalyst and hence the better the catalytic activity for the oxidation of propane. Consequently, NiO-L exhibited remarkable catalytic activity and good stability for propane oxidation. This study provided a simple strategy for controlling NiO crystal facets, and demonstrated that the oxygen defects could be more easily formed on NiO(111) facets, thus would be beneficial for the activation of C-H bonds in propane. In addition, the results of this work can be extended to the other fields, such as propane oxidation to propene, fuel cells, and photocatalysis.

Architectural Decoration of Bioleached NiFeP Surfaces by Co3O4 Flowers for Efficient Electrocatalytic Hydrogen Generation

In the quest for sustainable hydrogen production via water electrolysis, the development of high-performance, noble-metal-free catalytic systems is highly desired. Herein, we proposed an innovative strategy for the development of an electrocatalyst by refining the surface characteristics of a NiFeP alloy through microbiological techniques and subsequent enrichment of active sites by tailoring 3D hierarchical flower-like structures with intact and interconnected two-dimensional (2D) Co3O4. The resultant 3D Co3O4@NiFeP-5/24h has a porous structure comprised of intercrossed nanoparticles covering the entirety of the catalytic surface. This design ensures comprehensive electrolyte ion penetration and facilitates the release of gas bubbles while reducing bubble adhesion rates. Remarkably, the Co3O4@NiFeP-5/24h electrode demonstrates superior hydrogen evolution (HER) performance in an alkaline medium, characterized by its high stability, low overpotential (106 mV at a current density of 10 mA cm-2), and reduced Tafel slope (98 mV dec-1). Besides, the minimized interfacial contact resistance among the phases of electrode and electrolyte emphasizes the high HER performance of the 3D Co3O4@NiFeP-5/24h electrode. The innovative design and fabrication strategy employed herein holds significant potential for advancing the field of water-splitting electrocatalysis, offering a promising path toward the rational design and development of noble-metal-free electrocatalysts.

A bimetallic MOF-derived MnCo spinel oxide catalyst to enhance toluene catalytic degradation

MnCo spinel oxide catalysts were successfully synthesized by the calcination of bimetallic Mn/Co-MOFs as sacrificial templates. The derived catalysts exhibited optimal catalytic activity, reusability and thermal stability for toluene oxidation, which was ascribed to their large specific surface area, higher number of octahedral metal ions and the weakest metal-oxygen bonds.

Graphitized Carbon-Supported Co@Co3O4 for Ozone Decomposition over the Entire Humidity Range

Ground-level ozone (O3) pollution has emerged as a significant concern due to its detrimental effects on human health and the ecosystem. Catalytic removal of O3 has proven to be the most efficient and cost-effective method. However, its practical application faces substantial challenges, particularly in relation to its effectiveness across the entire humidity range. Herein, we proposed a novel strategy termed "dual active sites" by employing graphitized carbon-loaded core-shell cobalt catalysts (Co@Co3O4-C). Co@Co3O4-C was synthesized via the pyrolysis of a Co-organic ligand as the precursor. By utilizing this approach, we achieved a nearly constant 100% working efficiency of the Co@Co3O4-C catalyst for catalyzing O3 decomposition across the entire humidity range. Physicochemical characterization coupled with density functional theory calculations elucidates that the presence of encapsulated metallic Co nanoparticles enhances the reactivity of the cobalt oxide capping layer. Additionally, the interface carbon atom, strongly influenced by adjacent metallic Co nuclei, functions as a secondary active site for the decomposition of O3 decomposition. The utilization of dual active sites effectively mitigates the competitive adsorption of H2O molecules, thus isolating them for adsorption in the cobalt oxide capping layer. This optimized configuration allows for the decomposition of O3 without interference from moisture. Furthermore, O3 decomposition monolithic catalysts were synthesized using a material extrusion-based three-dimensional (3D) printing technology, which demonstrated a low pressure drop and exceptional mechanical strength. This work provides a "dual active site" strategy for the O3 decomposition reaction, realizing O3 catalytic decomposition over the entire humidity range.

Benzene Oxidation in Air by an Amine-Functionalized Metal-Organic Framework-Derived Carbon- and Nitrogen-Loaded Zirconium Dioxide-Supported Platinum Catalyst

To learn more about the behavior of amine (NH2)-functionalized metal-organic framework (MOF)-derived noble metal catalysts in the removal of aromatic volatile organic compounds in air, benzene oxidation at low temperatures has been investigated using 0.2-, 0.8-, and 1.5%-platinum (Pt)/Universitetet i Oslo (UiO)-66-NH2. The benzene conversion (XB) of x%-Pt/UiO-66-NH2-R under dry conditions (175 °C) was 23% (x = 0.2%) < 52% (x = 0.8%) < 100% (x = 1.5%): 'R' suffix denotes reduction pretreatment using a hydrogen (10 vol %) and nitrogen mixture at 300 °C for the generation of metallic Pt (Pt0) sites and simultaneous partial MOF decomposition into carbon- and nitrogen-loaded zirconium dioxide. The prominent role of reduction pretreatment was apparent in benzene oxidation as 1.5%-Pt/UiO-66-NH2 did not exhibit catalytic activity below 175 °C (dry condition). The promotional role of moisture in benzene oxidation by 1.5%-Pt/UiO-66-NH2-R was evident with a rise in the steady-state reaction rate (r) at 110 °C (21 kPa molecular oxygen (O2)) from 1.3 × 10-3 to 5.0 × 10-3 μmol g-1 s-1 as the water (H2O) partial pressure increased from 0 to 1.88 kPa. In contrast, the activity was lowered with increasing RH due to catalyst poisoning by excess moisture (r (110 °C) of 6.6 × 10-04 μmol g-1 s-1 at 2.83 kPa H2O (21 kPa O2)). Kinetic modeling suggests that XB proceeds through the Langmuir-Hinshelwood mechanism on the Pt/UiO-66-NH2-R surface (dissociative O2 chemisorption and the involvement of two oxygen species in benzene oxidation). According to the density functional theory simulation, the carbon and nitrogen impurities are to make the first XB step (i.e., hydrogen migration from the benzene molecule to the substrate) energetically favorable. The second hydrogen atom from the benzene molecule is also extracted effectively, while the oxygen derived from O2 facilitates further XB. The Pt0 sites dissociate the O2 and H2O molecules, while the product of the latter, i.e., free hydrogen and hydroxyl, makes the subsequent XB steps energetically favorable.

Enhancing CO catalytic oxidation performance over Cu-doping manganese oxide octahedral molecular sieves catalyst

The CO oxidation catalytic activity of catalysts is strongly influenced by the oxygen vacancy defects (OVDs) concentration and the valence state of active metal. Herein, a defect engineering approach was implemented to enhance the oxygen vacancy defects and to modify the valence of metal ions in manganese oxide octahedral molecular sieves (OMS-2) by the introduction of copper (Cu). The characterization and theoretical calculation results reveal that the incorporation of Cu2+ ion into the OMS-2 structure led to a rise in specific surface area and pore volume, weakening of Mn-O bonds, higher proportion of the low-coordinated oxygen species adsorbed in oxygen vacancies (Oads) and an increase in the average oxidation state of manganese. These structural modifications were discovered to considerably reduce the apparent activation energy (Ea), thus ultimately significantly enhancing the CO oxidation activity (T99 at 148 ℃at GHSV = 13,200 h-1) than the original OMS-2 (T99 = 215 ℃ at GHSV = 13,200 h-1). Furthermore, In-situ diffuse reflectance infrared Fourier transform (DRIFT) and In-situ near-ambient pressure X-ray photoelectron spectroscopy (in situ NAP-XPS) results indicate that the bimetallic synergy enhanced by doping strategy accelerates the conversion of oxygen to chemisorbed oxygen species and the reaction rate of CO oxidation through Mn3++Cu2+↔Mn4++Cu+ redox cycle. The findings of this study offer novel perspectives on the design of catalysts with exceptional performance in CO oxidation.

Ultrathin LayCoOx Nanosheets with High Porosity Featuring Boosted Catalytic Oxidation of Benzene: Mechanism Elucidation via an Experiment-Theory Combined Paradigm

Designing transition-metal oxides for catalytically removing the highly toxic benzene holds significance in addressing indoor/outdoor environmental pollution issues. Herein, we successfully synthesized ultrathin LayCoOx nanosheets (thickness of ∼1.8 nm) with high porosity, using a straightforward coprecipitation method. Comprehensive characterization techniques were employed to analyze the synthesized LayCoOx catalysts, revealing their low crystallinity, high surface area, and abundant porosity. Catalytic benzene oxidation tests demonstrated that the La0.029CoOx-300 nanosheet exhibited the most optimal performance. This catalyst enabled complete benzene degradation at a relatively low temperature of 220 °C, even under a high space velocity (SV) of 20,000 h-1, and displayed remarkable durability throughout various catalytic assessments, including SV variations, exposure to water vapor, recycling, and long time-on-stream tests. Characterization analyses confirmed the enhanced interactions between Co and doped La, the presence of abundant adsorbed oxygen, and the extensive exposure of Co3+ species in La0.029CoOx-300 nanosheets. Theoretical calculations further revealed that La doping was beneficial for the formation of oxygen vacancies and the adsorption of more hydroxyl groups. These features strongly promoted the adsorption and activation of oxygen, thereby accelerating the benzene oxidation processes. This work underscores the advantages of doping rare-earth elements into transition-metal oxides as a cost-effective yet efficient strategy for purifying industrial exhausts.

Prussian Blue Analogue-Derived Co3O4 as Catalysts for Enhanced Selective Oxidation of Cyclohexane Using Molecular Oxygen

Selective conversion of inert C-H bonds in alkanes into high-value-added functional groups (alcohols, ketones, carboxylic acids, etc.) plays a vital role in establishing a green and sustainable chemical industry. Catalytic selective oxidation of cyclohexane to KA oil (cyclohexanol and cyclohexanone) is a typical representative of alkane functionalization. In this work, hollow cage-like Co3O4 (Co3O4-C) and particle Co3O4 (Co3O4-P) were synthesized by calcining two types of Prussian blue analogues (PBAs), which were used to catalyze the selective oxidation of cyclohexane. The Co3O4-C predominantly exposed (311) crystal plane is easier to adsorb cyclohexane than Co3O4-P, which is beneficial to shorten the induction period, accelerate the reaction rate, and improve the conversion. Consequently, Co3O4-C displayed a 10% conversion of cyclohexane within 1 h, and the KA oil selectivity reached 90%. The Co3O4-P exposed (220) crystal plane has a higher molar percentage of oxygen vacancies and more active oxygen species, as well as a strong cyclohexanone adsorption capacity, which is conducive to the deep oxidation of cyclohexanone to adipic acid and other diacid products. The mechanism analysis of cyclohexane oxidation catalyzed by PBA-based Co3O4 shows that it exemplifies the feasibility to tailor the surface of catalysts by modulating the PBAs, which ultimately influences their reaction performance for accelerating the reaction and maintaining high cyclohexane conversion and KA oil selectivity.

Application of a manganese dioxide/amine-functionalized metal-organic framework nanocomposite as a bifunctional adsorbent-catalyst for the room-temperature removal of gaseous aromatic hydrocarbons

A high surface area (883 m2·g-1) nanocomposite composed of an amine-functionalized metal-organic framework (NH2-UiO-66 (U6N)) and manganese dioxide (MnO2@U6N) was prepared as bifunctional adsorbent-catalyst for the purification of multiple aromatic volatile organic compounds (VOCs) such as benzene (B), toluene (T), m-xylene (X), and styrene (S), i.e., BTXS. The performance of MnO2@U6N was assessed for BTXS removal both as single- and multi-component systems at room temperature (RT (20 °C)) under dark conditions. MnO2@U6N exhibited superior catalytic-adsorption activity for the RT removal of BTXS. The removal performance of MnO2@U6N against BTXS was then assessed across varying levels of flow rate, VOC concentration, adsorbent/catalyst mass, and relative humidity. To better understand the catalytic-adsorption activity, two types of non-linear kinetic models (pseudo-first-order and pseudo-second-order) were utilized to simulate the experimentally obtained data. In-situ diffuse reflectance infrared Fourier-transform spectroscopy (DRIFTS) analysis was also conducted to interpret the removal mechanism of BTXS. Their adsorption capacity (mg·g-1) values are estimated to increase in the order of B (21.1) < T (66.0) < X (79.1) < S (129.7). It is suggested that the adsorbed aromatic VOC molecules on the surface of MnO2@U6N should react with active oxygen species (lattice and adsorbed oxygen) to yield the environmentally benigh end products (i.e., carbon dioxide and water) along with various intermediates (e.g., alkoxides, aldehydes, phenolates, carboxylates, and anhydrides). Accordingly, the VOC removal potential of MnO2@U6N has been validated through the synergistic combination between adsorption (primary process) and catalysis (subordinate process) at RT.

Constructing Active Cu2+-O-Fe3+ Sites at the CuO-Fe3O4 Interface to Promote Activation of Surface Lattice Oxygen

Activating surface lattice oxygen (Olatt) through the modulation of metal-oxygen bond strength has proven to be an effective route for facilitating the catalytic degradation of volatile organic compounds (VOCs). Although this strategy has been implemented via the construction of the TM1-O-TM2 (TM represents a transition metal) structure in various reactions, the underlying principle requires exploration when using different TMs. Herein, the Cu2+-O-Fe3+ structure was created by developing CuO-Fe3O4 composites with enhanced interfacial effect, which exhibited superior catalytic activity to their counterparts, with T90 (the temperature of toluene conversion reaching 90%) decreasing by approximately 50 °C. Structural analyses and theoretical calculations demonstrated that the active Cu2+-O-Fe3+ sites at the CuO-Fe3O4 interface improved low-temperature reducibility and oxygen species activity. Particularly, X-ray absorption fine structure spectroscopy revealed the contraction and expansion of Cu-O and Fe-O bonds, respectively, which were responsible for the activation of the surface Olatt. A mechanistic study revealed that toluene can be oxidized by rapid dehydrogenation of methyl assisted by the highly active surface Olatt and subsequently undergo ring-opening and deep mineralization into CO2 following the Mars-van Krevelen mechanism. This study provided a novel strategy to explore interface-enhanced TM catalysts for efficient surface Olatt activation and VOCs abatement.

Defect Engineering of High-Entropy Oxides for Superior Catalytic Oxidation Performance

High-entropy oxides (HEOs) are crucial in various fields (power storage/conversion, electronic devices, and catalysis) owing to their adjustable structural characteristics, fabulous stability, and massive components. However, the current strategies for synthesizing HEOs suffer from low surface area and limited active sites. Herein, we present a salt-assisted strategy with remarkable universality for the preparation of HEOs with high surface area [e.g., HP-(FeCrCoNiCu)xOy: 59 m2/g, HP-(ZnMgNiCuCo)xOy: 49 m2/g, and HP-(CrMnFeNiZn)xOy: 11 m2/g], where HP means high porosity. Especially, HP-(FeCrCoNiCu)xOy with rich-oxygen vacancies promotes catalytic efficiency for hydrocarbon and alcohol oxidation owing to its hierarchical texture and massive oxygen vacancies. Furthermore, density functional theory is utilized to well illustrate the relationship of the structure and catalytic efficiency within the catalysts. This work offers realistic pathway for the large-scale application of HEOs in catalytic areas.

Tuning Oxygen Vacancies in Oxides by Configurational Entropy

Tuning surface oxygen vacancies is important for oxide catalysts. Doping elements with different chemical valence states or different atomic radii into host oxides is a common method to create oxygen vacancies. However, the concentration of oxygen vacancies in oxide catalysts is still limited to the amount of foreign dopants that can be tolerated (generally less than 10% atoms). Herein, a principle of engineering the configurational entropy to tune oxygen vacancies was proposed. First, the positive relationship between the configuration entropy and the formation energy of oxygen vacancies (Eov) in 16 model oxides was estimated by a DFT calculation. To verify this, single binary oxides and high-entropy quinary oxides (HEOs) were prepared. Indeed, the concentration of oxygen vacancies in HEOs (Oβ/α = 3.66) was higher compared to those of single or binary oxides (Oβ/α = 0.22-0.75) by O1s XPS, O2-TPD, and EPR. Interestingly, the reduction temperatures of transition metal ions in HEOs were generally lower than that in single-metal oxides by H2-TPR. The lower Eov of HEOs may contribute to this feature, which was confirmed by in situ XPS and in situ XRD. Moreover, with catalytic CO/C3H6 oxidation as a model, the high-entropy (MnCuCo3NiFe)xOy catalyst showed higher catalytic activity than single and binary oxides, which experimentally verified the hypothesis of the DFT calculation. This work may inspire more oxide catalysts with preferred oxygen vacancies.

Dopant Site Engineering on 2D Co3O4 Enables Enhanced Toluene Oxidation in a Wide Temperature Range

Development of cost-effective oxide catalysts holds the key to the removal of toluene, one of the most important volatile organic compounds. However, the catalysts follow varied working mechanisms at different reaction temperatures, posing a challenge to achieving efficient toluene removal over a wide temperature range. Here we report an agitation-assisted molten salt method, which achieves the rational doping on a two-dimensional Co3O4 catalyst and forms two different structures of active sites to enhance catalytic oxidation of toluene in specific temperature intervals, enabling a facile tandem design for working in a wide temperature range. Specifically, Co3O4 is doped with Cu at the octahedral site (Cu-Co3O4) and Zn at the tetrahedral site (Zn-Co3O4) to form CuOh-O-CoTe and ZnTe-O-CoOh structures on the surface, respectively. Mechanistic studies reveal the different working mechanisms of these two active sites toward remarkable performance enhancement at specific temperature intervals, and the improved performance derived from accelerated consumption of intermediates adsorbed on the catalyst surface. Taken together, Cu-Co3O4 and Zn-Co3O4 achieve excellent toluene purification performance over a wide temperature range. This work provides insights into the mechanism-oriented design of active sites at the atomic level.

Chicken Cartilage-Derived Carbon for Efficient Xylene Removal

Chicken cartilage was used for the first time as a raw material for the microwave-assisted synthesis of biochar and activated carbon. Various microwave absorbers, i.e., commercial active carbon, scrap tyres, silicon carbide, and chicken bone-derived biochar, as well as various microwave powers, were tested for their effect on the rate of pyrolysis and the type of products formed. Biochars synthesised under 400 W in the presence of scrap tyres and chicken bone-derived biochar were activated with KOH and K₂CO₃ with detergent to produce activated carbon with a highly developed porous structure that would be able to effectively adsorb xylene vapours. All carbons were thoroughly characterised (infrared spectroscopy, X-ray fluorescence spectrometry, nitrogen adsorption/desorption, Raman spectroscopy, proximate and ultimate analysis) and tested as xylene sorbents in dynamic systems. It was found that the activation causes an increase of up to 1042 m²·g^-1 in the specific surface area, which ensures the sorption capacity of xylene about 300 mg·g^-1. Studies of the composition of biogas emitted during pyrolysis revealed that particularly valuable gaseous products are formed when pyrolysis is carried out in the presence of silicon carbide as a microwave absorber.

Crystal Plane Effect of Co3O4 on Styrene Catalytic Oxidation: Insights into the Role of Co3+ and Oxygen Mobility at Diverse Temperatures

In the oxidation reaction of volatile organic compounds catalyzed by metal oxides, distinguishing the role of active metal sites and oxygen mobility at specific preferentially exposed crystal planes and diverse temperatures is challenging. Herein, Co₃O₄ catalysts with four different preferentially exposed crystal planes [(220), (222), (311), and (422)] and oxygen vacancy formation energies were synthesized and evaluated in styrene complete oxidation. It is demonstrated that the Co₃O₄ sheet (Co₃O₄-I) presents the highest C₈H₈ catalytic oxidation activity (R_250 °C = 8.26 μmol g^-1 s^-1 and WHSV = 120,000 mL h^-1 g^-1). Density functional theory studies reveal that it is difficult for the (311) and (222) crystal planes to form oxygen vacancies, but the (222) crystal plane is the most favorable for C₈H₈ adsorption regardless of the presence of oxygen vacancies. The combined analysis of temperature-programmed desorption and temperature-programmed surface reaction of C₈H₈ proves that Co₃O₄-I possesses the best C₈H₈ oxidation ability. It is proposed that specific surface area is vital at low temperature (below 250 °C) because it is related to the amount of surface-adsorbed oxygen species and low-temperature reducibility, while the ratio of surface Co³⁺/Co²⁺ plays a decisive role at higher temperature because of facile lattice oxygen mobility. In situ diffuse reflectance infrared Fourier spectroscopy and the ¹⁸O₂ isotope experiment demonstrate that C₈H₈ oxidation over Co₃O₄-I, Co₃O₄-S, Co₃O₄-C, and Co₃O₄-F is mainly dominated by the Mars-van Krevelen mechanism. Furthermore, Co₃O₄-I shows superior thermal stability (57 h) and water resistance (1, 3, and 5 vol % H₂O), which has the potential to be conducted in the actual industrial application.

Interface engineering of Mn3O4/Co3O4 S-scheme heterojunctions to enhance the photothermal catalytic degradation of toluene

Transition metal oxides have high photothermal conversion capacity and excellent thermal catalytic activity, and their photothermal catalytic ability can be further improved by reasonably inducing the photoelectric effect of semiconductors. Herein, Mn₃O₄/Co₃O₄ composites with S-scheme heterojunctions were fabricated for photothermal catalytic degradation of toluene under ultraviolet-visible (UV-Vis) light irradiation. The distinct hetero-interface of Mn₃O₄/Co₃O₄ effectively increases the specific surface area and promotes the formation of oxygen vacancies, thus facilitating the generation of reactive oxygen species and migration of surface lattice oxygen. Theoretical calculations and photoelectrochemical characterization demonstrate the existence of a built-in electric field and energy band bending at the interface of Mn₃O₄/Co₃O₄, which optimizes the photogenerated carriers' transfer path and retains a higher redox potential. Under UV-Vis light irradiation, the rapid transfer of electrons between interfaces promotes the generation of more reactive radicals, and the Mn₃O₄/Co₃O₄ shows a substantial improvement in the removal efficiency of toluene (74.7%) compared to single metal oxides (53.3% and 47.5%). Moreover, the possible photothermal catalytic reaction pathways of toluene over Mn₃O₄/Co₃O₄ were also investigated by in situ DRIFTS. The present work offers valuable guidance toward the design and fabrication of efficient narrow-band semiconductor heterojunction photothermal catalysts and provides deeper insights into the mechanism of photothermal catalytic degradation of toluene.

Redox-Induced In Situ Growth of MnO2 with Rich Oxygen Vacancies over Monolithic Copper Foam for Boosting Toluene Combustion

Catalytic combustion has been known to be an effective technique in volatile organic compound (VOC) abatement. Developing monolithic catalysts with high activity at low temperatures is vital yet challenging in industrial applications. Herein, monolithic MnO₂-O_v/CF catalysts were fabricated via the in situ growth of K₂CuFe(CN)₆ (CuFePBA, a family of metal-organic frames) over copper foam (CF) followed by a redox-etching route. The as-synthesized monolith MnO₂-O_v-0.04/CF catalyst displays a superior low-temperature activity (T_90% = 215 °C) and robust durability for toluene elimination even in the presence of 5 vol % water. Experimental results reveal that the CuFePBA template not only guides the in situ growth of δ-MnO₂ with high loading over CF but also acts as a source of dopant to create more oxygen vacancies and weaken the strength of the Mn-O bond, which considerably improves the oxygen activation ability of δ-MnO₂ and consequently boosts the low-temperature catalytic activity of the monolith MnO₂-O_v-0.04/CF toward toluene oxidation. In addition, the reaction intermediate and proposed mechanism in the MnO₂-O_v-0.04/CF mediated catalytic oxidation process were investigated. This study provides new insights into the development of highly active monolithic catalysts for the low-temperature oxidation of VOCs.

Unveiling the Origin of Co3 O4 Quantum Dots for Photocatalytic Overall Water Splitting

Spinel cobalt oxide displays excellent photocatalytic performance, especially in solar driven water oxidation. However, the process of water reduction to hydrogen is considered as the Achilles' heel of solar water splitting over Co₃ O₄ owing to its low conduction band. Enhancement of the water splitting efficiency using Co₃ O₄ requires deeper insights of the carrier dynamics during water splitting process. Herein, the carrier dynamic kinetics of colloidal Co₃ O₄ quantum dots-Pt hetero-junctions is studied, which mimics the hydrogen reduction process during water splitting. It is showed that the quantum confinement effect induced by the small QD size raised the conduction band edge position of Co₃ O₄ QDs, so that the ligand-to-metal charge transfer from 2p state of oxygen to 3d state of Co²⁺ occurs, which is necessary for overall water splitting and cannot be achieved in Co₃ O₄ bulk crystals. The findings in this work provide insights of the photocatalytic mechanism of Co₃ O₄ catalysts and benefit rational design of Co₃ O₄ -based photocatalytic systems.

Unraveling the role of Co3O4 facet for photothermal catalytic oxidation of methanol via operando spectroscopy and theoretical investigation

Tubular, pie- and bread-shaped forms of Co₃O₄ with exposed {110}, {112} and {111} facets were prepared and compared in their photothermal catalytic performance and reaction pathways during the oxidation of methanol. Among them, the Co₃O₄ with exposed {110} facet exhibited the best photothermal catalytic performance (95% methanol conversion, 93% CO₂ yield) under solar irradiation, while also maintaining good stability and moisture resistance. Reaction mechanism studies showed that the {110} facets had a strong adsorption capacity for formaldehyde, which facilitated its conversion to formate. The transformation of formaldehyde to formate species was the key step. The key step on the {110} facet was conversion of formaldehyde to a mono-dentate formate species, while conversion on the {112} and {111} facets was mainly to bi-dentate formate species. This study demonstrated that the design of preferential exposed crystal facet can regulate the pathway of photothermal catalytic reaction and realize efficient solar energy utilization.

Oxygen Vacancy Promoted O2 Activation over Mesoporous Ni-Co Mixed Oxides for Aromatic Hydrocarbon Oxidation

Whether the oxygen vacancies of heterogeneous catalysts improve their catalytic activity or not has recently been the topic of intense debate in the oxidation of hydrocarbons. We designed an effective strategy to construct mesoporous Ni-Co mixed oxides via a ligand-assisted self-assembly approach. The surface oxygen vacancy concentrations of the mesoporous Ni-Co mixed oxide catalysts were regulated by changing the doping amount of Ni or the reduction method, and the relationship between oxygen vacancies and catalytic activity was studied. Controlled experiments and DFT calculations revealed that oxygen molecules were more favorably adsorbed and activated on oxygen vacancies to form active oxygen species. Increasing the oxygen vacancy concentration within a certain range can effectively enrich the active oxygen species, therefore improving the oxidation rate of ethylbenzene. The optimized mCo₃O₄-0.1NiO catalyst exhibited a remarkable catalytic activity for the solvent-free oxidation of ethylbenzene to acetophenone, typically including 68.0% conversion and 95.4% selectivity (20 mg mCo₃O₄-0.1NiO, 10 mL ethylbenzene, and 0.6 MPa O₂).

Lattice Compressive Strain of Co3O4 Induced by Synthetic Solvents Promotes Efficient Oxidation of Benzene at Low Temperature

A series of Co₃O₄ with different surface defective structures were prepared by the solvothermal method and tested for the activity of benzene oxidation. The characterizations revealed that the synthetic solvent had a dramatic effect on the composition of Co₃O₄ precursors as well as the physicochemical properties of Co₃O₄. Although all Co₃O₄ exhibited a cubic spinel structure, Co₃O₄ prepared with triethylene glycol (Co-TEG) had the highest compressive strain due to the nature of high viscosity of triethylene glycol. These in turn affected the surface chemical structure and the low-temperature redox properties. Co-TEG exhibited the best benzene oxidation activity and showed excellent stability and good water resistance. In situ diffuse reflectance infrared Fourier transform spectroscopy was used to study the oxidation process of benzene. It was found that Co-TEG with more defective structures had abundant surface adsorbed oxygen and active lattice oxygen, which promoted the conversion of benzene and the corresponding intermediates at low temperature.

In Situ Fabrication of Highly Dispersed Co-Fe-Doped-δ-MnO2 Catalyst by a Facile Redox-Driving MOFs-Derived Method for Low-Temperature Oxidation of Toluene

Cost-efficient and durable manganese-based catalysts are in great demand for the catalytic elimination of volatile organic compounds (VOCs), which are dominated not only by the nanostructures but also by the oxygen vacancies and Mn-O bond in the catalysts. Herein, a series of nanostructured Co-Fe-doped-δ-MnO₂ catalysts (Co-Fe-δ-MnO₂) with high dispersion were in situ fabricated by employing metal-organic-frameworks (MOFs) as reducing agents, dopants, and templates all at the same time. The as-obtained Co-Fe-δ-MnO₂-20% catalyst exhibited robust durability and high catalytic activity (225 °C) for toluene combustion even in the presence of 5 vol % water vapor, which is 50 °C lower than that of pristine δ-MnO₂. Various characterizations revealed that the homogeneously dispersed codoping of Co and Fe ions into δ-MnO₂ promotes the generation of oxygen vacancies and weakens the strength of the Mn-O bond, thus increasing the amount of adsorbed oxygen (O_ads) and improving the mobility of lattice oxygen (O_latt). Meanwhile, due to successfully inheriting the framework structures of MOFs, the obtained catalyst exhibited a high surface area and three-dimensional mesoporous structure, which contributes to diffusion and increases the number of active sites. Moreover, in situ DRIFTS results confirmed that the toluene degradation mechanism on the Co-Fe-δ-MnO₂-20% follows the MVK mechanism and revealed that more O_ads and high-mobility O_latt induced by this novel method contribute to accumulating and mineralizing key intermediates (benzoate) and thus promote toluene oxidation. In conclusion, this work stimulates the opportunities to develop Co-Fe-δ-MnO₂ as a class of nonprecious-metal-based catalysts for controlling VOC emissions.

Metal-organic frameworks-derived manganese trioxide with uniformly loaded ultrasmall platinum nanoparticles boosting benzene combustion

Four morphologies of metal-organic frameworks derived Mn₂O₃ were prepared by calcination of metal-organic frameworks self-assembled from metal ions and organic ligands and loaded with platinum. The catalyst showed excellent catalytic performance for benzene (T_90% = 131 °C). ESR (electron spin resonance) test showed that due to the strong electron metal support interaction between Pt and Mn₂O₃, there were a large number of oxygen vacancies on the surface of the catalyst as active sites to promote the oxidation of benzene. The presence of a large number of Lewis acid sites on the catalyst surface was confirmed by Py-IP (Pyridine adsorption infrared spectroscopy) test. The intermediates of benzene catalytic oxidation are ethyl acetate, carboxylic acids and aldehydes, which can be verified by in-situ DRIFTS. In summary, the catalysts synthesized in this work provide a novel perspective for combining metal-organic frameworks-derived oxides and precious metals for the catalytic oxidation of volatile organic compounds.

Yttrium-modified Co3O4 as efficient catalysts for toluene and propane combustion: Effect of yttrium content

A series of Y-modified cobalt oxides with various Y/(Co+Y) molar ratios (0.25 %, 0.5 %, 1 %, 3 % and 5 %) were prepared to study the effect of Y content on toluene and propane combustion. The characterization of the catalysts revealed that proper Y incorporation resulted in smaller crystallite sizes, larger specific surface areas, more oxygen vacancies and weaker Co-O bonds. As such, the Y-modified Co₃O₄ showed enhanced low-temperature reducibility, boosted oxygen mobility and better catalytic activity. However, excess Y (> 1 %) aggregates on the surface of Co₃O₄ and forms yttrium carbonate species, hindering the catalyst activity. A volcano-type relationship between the Y content and the catalytic activity was established. The optimal catalyst 1 % Y-Co (with Y/(Co+Y) molar ratio of 1 %) exhibited toluene oxidation rate of 24 nmol g^-1 s^-1 at 220 °C and propane oxidation rate of 69 nmol g^-1 s^-1 at 180 °C. Besides, 1 % Y-Co presented perfect cycling stability and long-term durability in propane oxidation. Regarding its low cost, high efficiency and good stability, 1 % Y-Co is a promising catalyst for the practical elimination of hydrocarbon emissions.

Investigation of defect-rich CeO2 catalysts for super low-temperature catalytic oxidation and durable styrene removal

Spherical cerium dioxide (CeO₂-S) nanoparticles were successfully prepared using a solvothermal method, and their performances in catalytic oxidation reactions were studied. The CeO₂-S catalyst showed superior low-temperature catalytic activity for styrene removal (T₉₀ = 118 °C, GHSV = 18,000 h^-1) compared with commercial CeO₂. The characterization results showed that there were numerous oxygen defects in CeO₂-S that were key to its catalytic performance at low temperatures, high redox properties, and high adsorption capacity for the reaction gases (O₂ and styrene). Moreover, the catalytic performance of CeO₂-S was highly stable (132 h), and the particles were reusable. FTIR and in-situ DRIFTS results showed that the type of intermediates formed during the oxidation of styrene determined the CeO₂ catalytic stability, and the main intermediates were bidentate carbonate species that accumulated on the surface of deactivated CeO₂-S and were not thermally stable. Moreover, the soft carbon that also deposited on CeO₂-S during the reaction was easily decomposed at higher temperatures. The role of the oxygen vacancies on the CeO₂-S catalyst was further revealed by correlating the concentration of oxygen vacancies and the accumulation of coke on the catalyst surface.

Roles of Oxygen Species in Low-Temperature Catalytic o-Xylene Oxidation on MOF-Derived Bouquetlike CeO2

To realize efficient low-temperature catalytic o-xylene oxidation, MOF-derived CeO₂-X catalysts were prepared via the pyrolysis of MOF precursors with different ratios of cerium nitrate to trimesic acid. Among the synthesized catalysts, the bouquet like CeO₂-1 exhibited the best activity with T₅₀ and T₉₀ of 156 and 198 °C and the lowest activation energy of 60.67 kJ·mol^-1 (WHSV= 48 000 mL·g^-1·h^-1, o-xylene concentration = 500 ppm). o-Xylene was completely mineralized, and no change in conversion efficiency or CO₂ yield was found at 5 vol % H₂O for over 50 h. The rich active oxygen species (XPS: O_sur/O_latt = 0.69) and abundant oxygen vacancies (Raman: I_D/I_F2g = 0.036) of CeO₂-1 made crucial contribution to its superior catalytic activity. The O₂-TPD and H₂-TPR results confirmed that CeO₂-1 had more surface active oxygen and better mobility of bulk oxygen. Moreover, the reaction routes under different atmospheres were probed through in situ DRIFTS, in which oxygen vacancy played a key role in promoting the adsorption and activation of molecular oxygen and facilitating the migration of the bulk lattice oxygen.

Acid Etching-Induced In Situ Growth of λ-MnO2 over CoMn Spinel for Low-Temperature Volatile Organic Compound Oxidation

Surface lattice oxygen is crucial to the degradation of volatile organic compounds (VOCs) over transition metal oxides according to the Mars-van Krevelen mechanism. Herein, λ-MnO₂ in situ grown on the surface of CoMn spinel was prepared by acid etching of corresponding spinel catalysts (CoMn-Hx-Ty) for VOC oxidation. Experimental and relevant theoretical exploration revealed that acid etching on the CoMn spinel surface could decrease the electron cloud density around the O atom and weaken the adjacent Mn-O bond due to the fracture of the surface Co-O bond, facilitating electron transfer and subsequently the activation of surface lattice oxygen. The obtained CoMn-H1-T1 exhibited an excellent catalytic performance with a 90% acetone conversion at 149 °C, which is 42 °C lower than that of CoMn spinel. Furthermore, the partially maintained spinel structure led to better stability than pure λ-MnO₂. In situ diffuse reflectance infrared Fourier transform spectroscopy confirmed a possible degradation pathway where adsorptive acetone converted into formate and acetate species and into CO₂, in which the consumption of acetate was identified as the rate-limiting step. This strategy can improve the catalytic performance of metal oxides by activating surface lattice oxygen, to broaden their application in VOC oxidation.

Cu-VWT Catalysts for Synergistic Elimination of NOx and Volatile Organic Compounds from Coal-Fired Flue Gas

A dual-function catalyst, designated as Cu5-VWT, has been constructed for the synergistic removal of NO_x and volatile organic compounds under complex coal-fired flue gas conditions. The removal of toluene, propylene, dichloromethane, and naphthalene all exceeded 99% (350 °C), and the catalyst could effectively block the generation of polycyclic aromatic hydrocarbons. Mechanistic studies have shown that Cu sites on the Cu5-VWT catalyst facilitate catalytic oxidation, while V sites facilitate NO_x reduction. Thus, toluene oxidation and NO_x reduction can proceed simultaneously. The removal of total hydrocarbons and nonmethane total hydrocarbons from 1200 m³·h^-1 real coal-fired flue gas by a monolithic catalyst were determined as 92 and 96%, respectively, much higher than those of 54 and 72% over a commercial VWT catalyst, indicating great promise for industrial application.