Cells Sensing Mechanical Cues: Stiffness Influences the Lifetime of Cell-Extracellular Matrix Interactions by Affecting the Loading Rate

DNA-based ForceChrono probes for deciphering single-molecule force dynamics in living cells

Understanding cellular force transmission dynamics is crucial in mechanobiology. We developed the DNA-based ForceChrono probe to measure force magnitude, duration, and loading rates at the single-molecule level within living cells. The ForceChrono probe circumvents the limitations of in vitro single-molecule force spectroscopy by enabling direct measurements within the dynamic cellular environment. Our findings reveal integrin force loading rates of 0.5-2 pN/s and durations ranging from tens of seconds in nascent adhesions to approximately 100 s in mature focal adhesions. The probe's robust and reversible design allows for continuous monitoring of these dynamic changes as cells undergo morphological transformations. Additionally, by analyzing how mutations, deletions, or pharmacological interventions affect these parameters, we can deduce the functional roles of specific proteins or domains in cellular mechanotransduction. The ForceChrono probe provides detailed insights into the dynamics of mechanical forces, advancing our understanding of cellular mechanics and the molecular mechanisms of mechanotransduction.

A cigarette filter-derived biomimetic cardiac niche for myocardial infarction repair

Cell implantation offers an appealing avenue for heart repair after myocardial infarction (MI). Nevertheless, the implanted cells are subjected to the aberrant myocardial niche, which inhibits cell survival and maturation, posing significant challenges to the ultimate therapeutic outcome. The functional cardiac patches (CPs) have been proved to construct an elastic conductive, antioxidative, and angiogenic microenvironment for rectifying the aberrant microenvironment of the infarcted myocardium. More importantly, inducing implanted cardiomyocytes (CMs) adapted to the anisotropic arrangement of myocardial tissue by bioengineered structural cues within CPs are more conducive to MI repair. Herein, a functional Cig/(TA-Cu) CP served as biomimetic cardiac niche was fabricated based on structural anisotropic cigarette filter by modifying with tannic acid (TA)-chelated Cu2+ (TA-Cu complex) via a green method. This CP possessed microstructural anisotropy, electrical conductivity and mechanical properties similar to natural myocardium, which could promote elongation, orientation, maturation, and functionalization of CMs. Besides, the Cig/(TA-Cu) CP could efficiently scavenge reactive oxygen species, reduce CM apoptosis, ultimately facilitating myocardial electrical integration, promoting vascular regeneration and improving cardiac function. Together, our study introduces a functional CP that integrates multimodal cues to create a biomimetic cardiac niche and provides an effective strategy for cardiac repair.

Unusual effects of a nanoporous gold substrate on cell adhesion and differentiation because of independent multi-branch signaling of focal adhesions

A variety of cell behaviors, such as cell adhesion, motility, and fate, can be controlled by substrate characteristics such as surface topology and chemistry. In particular, the surface topology of substrates strongly affects cell behaviors, and the topological spacing is a critical factor in inducing cell responses. Various works have demonstrated that cell adhesion was enhanced with decreasing topological spacing although differentiation progressed slowly. However, there are exceptions, and thus, correlations between topological spacing and cell responses are still debated. We show that a nanoporous gold substrate affected cell adhesion while it neither affected osteogenic nor adipogenic differentiation. In addition, the cell adhesion was reduced with decreasing pore size. These do not agree with previous findings. A focal adhesion (FA) is an aggregate of modules comprising specific proteins such as FA kinase, talin, and vinculin. Therefore, it is suggested that because various extracellular signals can be independently branched off from the FA modules, the unusual effects of nanoporous gold substrates are related to the multi-branching of FAs.

Artificial Periosteum with Oriented Surface Nanotopography and High Tissue Adherent Property

Massive periosteal defects often significantly impair bone regeneration and repair, which have become a major clinical challenge. Unfortunately, current engineered periosteal materials can hardly currently focus on achieving high tissue adhesion property, being suitable for cell growth, and inducing cell orientation concurrently to meet the properties of nature periosteum. Additionally, the preparation of oriented surface nanotopography often relies on professional equipment. In this study, inspired by the oriented collagen structure of nature periosteum, we present a composite artificial periosteum with a layer of oriented nanotopography surface containing carbon nanotubes (CNTs), cross-linked with adhesive polydopamine (PDA) hydrogel on both terminals. An oriented surface structure that can simulate the oriented alignment of periosteal collagen fibers can be quickly and conveniently obtained via a simple stretching of the membrane in a water bath. With the help of CNTs, our artificial periosteum exhibits sufficient mechanical strength and desired oriented nanotopological structure surface, which further induces the directional arrangement of human bone marrow mesenchymal stem cells (hBMSCs) on the membrane. These oriented hBMSCs express significantly higher levels of osteogenic genes and proteins, while the resultant composite periosteum can be stably immobilized in vivo in the rat model of massive calvarial defect through the PDA hydrogel, which finally shows promising bone regeneration ability. We anticipate that the developed functional artificial periosteum has great potential in biomedical applications for the treatment of composite defects of the bone and periosteum.

Native extracellular matrix probes to target patient- and tissue-specific cell-microenvironment interactions by force spectroscopy

Atomic Force Microscopy (AFM) is successfully used for the quantitative investigation of the cellular mechanosensing of the microenvironment. To this purpose, several force spectroscopy approaches aim at measuring the adhesive forces between two living cells and also between a cell and an appropriate reproduction of the extracellular matrix (ECM), typically exploiting tips suitably functionalised with single components (e.g. collagen, fibronectin) of the ECM. However, these probes only poorly reproduce the complexity of the native cellular microenvironment and consequently of the biological interactions. We developed a novel approach to produce AFM probes that faithfully retain the structural and biochemical complexity of the ECM; this was achieved by attaching to an AFM cantilever a micrometric slice of native decellularised ECM, which was cut by laser microdissection. We demonstrate that these probes preserve the morphological, mechanical, and chemical heterogeneity of the ECM. Native ECM probes can be used in force spectroscopy experiments aimed at targeting cell-microenvironment interactions. Here, we demonstrate the feasibility of dissecting mechanotransductive cell-ECM interactions in the 10 pN range. As proof-of-principle, we tested a rat bladder ECM probe against the AY-27 rat bladder cancer cell line. On the one hand, we obtained reproducible results using different probes derived from the same ECM regions; on the other hand, we detected differences in the adhesion patterns of distinct bladder ECM regions (submucosa, detrusor, and adventitia), in line with the disparities in composition and biophysical properties of these ECM regions. Our results demonstrate that native ECM probes, produced from patient-specific regions of organs and tissues, can be used to investigate cell-microenvironment interactions and early mechanotransductive processes by force spectroscopy. This opens new possibilities in the field of personalised medicine.

Super-resolution traction force microscopy with enhanced tracer density enables capturing molecular scale traction

Cell traction mediates the biochemical and mechanical interactions between the cell and its extracellular matrix (ECM). Traction force microscopy (TFM) is a powerful technique for quantitative cellular scale traction analysis. However, it is challenging to characterize macromolecular scale traction events with current TFM due to the limited sampling density and algorithmic precision. In this article, we introduce a super-resolution TFM by utilizing a novel substrate surface modification method. Our TFM technique achieved a spatial resolution comparable to fluorescence microscopy and precision comparable to the rupture force of an integrin-ligand bond. Correlated imaging of TFM with fluorescence microscopy demonstrated that the residing paxillin highly correlated with traction while α5 integrin was located differently. Time-lapse TFM imaging captured a transient traction variation as the adhesion protein passed by. Thus, the novel super-resolution TFM benefits the studies on cellular biochemical and mechanical interactions.

On the significance of membrane unfolding in mechanosensitive cell spreading: Its individual and synergistic effects

Mechanosensitivity of cell spread area to substrate stiffness has been established both through experiments and different types of mathematical models of varying complexity including both the mechanics and biochemical reactions in the cell. What has not been addressed in previous mathematical models is the role of cell membrane dynamics on cell spreading, and an investigation of this issue is the goal of this work. We start with a simple mechanical model of cell spreading on a deformable substrate and progressively layer mechanisms to account for the traction dependent growth of focal adhesions, focal adhesion induced actin polymerization, membrane unfolding/exocytosis and contractility. This layering approach is intended to progressively help in understanding the role each mechanism plays in reproducing experimentally observed cell spread areas. To model membrane unfolding we introduce a novel approach based on defining an active rate of membrane deformation that is dependent on membrane tension. Our modeling approach allows us to show that tension-dependent membrane unfolding plays a critical role in achieving the large cell spread areas experimentally observed on stiff substrates. We also demonstrate that coupling between membrane unfolding and focal adhesion induced polymerization works synergistically to further enhance cell spread area sensitivity to substrate stiffness. This enhancement has to do with the fact that the peripheral velocity of spreading cells is associated with contributions from the different mechanisms by either enhancing the polymerization velocity at the leading edge or slowing down of the retrograde flow of actin within the cell. The temporal evolution of this balance in the model corresponds to the three-phase behavior observed experimentally during spreading. In the initial phase membrane unfolding is found to be particularly important.

Development of an Injectable Shear-Thinning Nanocomposite Hydrogel for Cardiac Tissue Engineering

Bone marrow-derived mesenchymal stem cells (MSCs) offer a promising therapeutic method for cardiac tissue regeneration. However, to monitor the fate of MSCs for tissue repair, a better stem cell delivery carrier is needed. Developing a unique injectable and shear-thinning dual cross-linked hybrid hydrogel for MSC delivery for cardiac tissue engineering is highly desirable. This hydrogel was synthesised using guest: host reaction based on alginate-cyclodextrin (Alg-CD) and adamantane-graphene oxide (Ad-GO). Here, the role of macromere concentration (10 and 12%) on the MSC function is discussed. Our hybrid hydrogels reveal a suitable oxygen pathway required for cell survival. However, this value is strongly dependent on the macromere concentrations, while the hydrogels with 12% macromere concentration (2DC12) significantly enhanced the oxygen permeability value (1.16-fold). Moreover, after two weeks of culture, rat MSCs (rMSCs) encapsulated in Alg-GO hydrogels expressed troponin T (TNT) and GATA4 markers. Noticeably, the 2DC12 hydrogels enhance rMSCs differentiation markers (1.30-times for TNT and 1.21-times for GATA4). Overall, our findings indicate that tuning the hydrogel compositions regulates the fate of encapsulated rMSCs within hydrogels. These outcomes may promote the advancement of new multifunctional platforms that consider the spatial and transient guidelines of undifferentiated cell destiny and capacity even after transplantation for heart tissue regeneration.

Injectable AuNP-HA matrix with localized stiffness enhances the formation of gap junction in engrafted human induced pluripotent stem cell-derived cardiomyocytes and promotes cardiac repair

Cell therapy offers a promising paradigm for heart tissue regeneration. Human induced pluripotent stem cells (hiPS) and their cardiac derivatives are emerging as a novel treatment for post-myocardial infarction repair. However, the immature phenotype and function of hiPS-derived cardiomyocytes (hiPS-CMs), particularly poor electrical coupling, limit their potential as a therapy. Herein, we developed a hybrid gold nanoparticle (AuNP)-hyaluronic acid (HA) hydrogel matrix encapsulating hiPS-CMs to overcome this limitation. Methacrylate-modified-HA was used as the backbone and crosslinked with a matrix metalloproteinase-2 (MMP-2) degradable peptide to obtain a MMP-2-responsive hydrogel; RGD peptide was introduced as an adhesion point to enhance biocompatibility; AuNPs were incorporated to regulate the mechanical and topological properties of the matrix by significantly increasing its stiffness and surface roughness, thereby accelerating gap junction formation in hiPS-CMs and orchestrating calcium handling via the α_nβ1integrin-mediated ILK-1/p-AKT/GATA4 pathway. Transplanted AuNP-HA-hydrogel-encapsulated-hiPS-CMs developed more robust gap junctions in the infarcted mice heart and resynchronized electrical conduction of the ventricle post-myocardial infarction. The hiPS-CMs delivered by the hydrogels exerted stronger angiogenic effects, which also contributed to the recovery process. This study provides insight into constructing an injectable biomimetic for structural and functional renovation of the injured heart.

Gli1+ Cells Residing in Bone Sutures Respond to Mechanical Force via IP3R to Mediate Osteogenesis

Early orthodontic correction of skeletal malocclusion takes advantage of mechanical force to stimulate unclosed suture remodeling and to promote bone reconstruction; however, the underlying mechanisms remain largely unclear. Gli1⁺ cells in maxillofacial sutures have been shown to participate in maxillofacial bone development and damage repair. Nevertheless, it remains to be investigated whether these cells participate in mechanical force-induced bone remodeling during orthodontic treatment of skeletal malocclusion. In this study, rapid maxillary expansion (RME) mouse models and mechanical stretch loading cell models were established using two types of transgenic mice which are able to label Gli1⁺ cells, and we found that Gli1⁺ cells participated in mechanical force-induced osteogenesis both in vivo and in vitro. Besides, we found mechanical force-induced osteogenesis through inositol 1,4,5-trisphosphate receptor (IP₃R), and we observed for the first time that inhibition of Gli1 suppressed an increase in mechanical force-induced IP3R overexpression, suggesting that Gli1⁺ cells participate in mechanical force-induced osteogenesis through IP₃R. Taken together, this study is the first to demonstrate that Gli1⁺ cells in maxillofacial sutures are involved in mechanical force-induced bone formation through IP₃R during orthodontic treatment of skeletal malocclusion. Furthermore, our results provide novel insights regarding the mechanism of orthodontic treatments of skeletal malocclusion.

3D-Printed Submicron Patterns Reveal the Interrelation between Cell Adhesion, Cell Mechanics, and Osteogenesis

The surface topography of implantable devices is of crucial importance for guiding the cascade of events that starts from the initial contact of the cells with the surface and continues until the complete integration of the device in its immediate environment. There is, however, limited quantitative information available regarding the relationships between the different stages of such cascade(s) and how the design of surface topography influences them. We, therefore, used direct laser writing to 3D-print submicron pillars with precisely controlled dimensions and spatial arrangements to perform a systematic study of such relationships. Using single-cell force spectroscopy, we measured the adhesion force and the work of adhesion of the preosteoblast cells residing on the different types of surfaces. Not only the adhesion parameters (after 2-60 s) but also the formation of focal adhesions was strongly dependent on the geometry and arrangement of the pillars: sufficiently tall and dense pillars enhanced both adhesion parameters and the formation of focal adhesions. Our morphological study of the cells (after 24 h) showed that those enhancements were associated with a specific way of cell settlement onto the surface (i.e., "top state"). The cells interacting with tall and dense pillars were also characterized by numerous thick actin stress fibers in the perinuclear region and possibly high internal stresses. Furthermore, living cells with highly organized cytoskeletal networks exhibited greater values of the elastic modulus. The early responses of the cells predicted their late response including matrix mineralization: tall and dense submicron pillars significantly upregulated the expression of osteopontin after 21 days of culture under both osteogenic and nonosteogenic conditions. Our findings paint a detailed picture of at least one possible cascade of events that starts from initial cell adhesion and continues to subsequent cellular functions and eventual matrix mineralization. These observations could inform the future developments of instructive surfaces for medical devices based on physical surface cues and early markers.

The force loading rate drives cell mechanosensing through both reinforcement and cytoskeletal softening

Cell response to force regulates essential processes in health and disease. However, the fundamental mechanical variables that cells sense and respond to remain unclear. Here we show that the rate of force application (loading rate) drives mechanosensing, as predicted by a molecular clutch model. By applying dynamic force regimes to cells through substrate stretching, optical tweezers, and atomic force microscopy, we find that increasing loading rates trigger talin-dependent mechanosensing, leading to adhesion growth and reinforcement, and YAP nuclear localization. However, above a given threshold the actin cytoskeleton softens, decreasing loading rates and preventing reinforcement. By stretching rat lungs in vivo, we show that a similar phenomenon may occur. Our results show that cell sensing of external forces and of passive mechanical parameters (like tissue stiffness) can be understood through the same mechanisms, driven by the properties under force of the mechanosensing molecules involved.

Xeno- and Feeder-Free Differentiation of Human iPSCs to Trabecular Meshwork-Like Cells by Recombinant Cytokines

Purpose

Stem cell-based therapy has the potential to become one approach to regenerate the damaged trabecular meshwork (TM) in glaucoma. Co-culture of induced pluripotent stem cells (iPSCs) with human TM cells has been a successful approach to generate autologous TM resembling cells. However, the differentiated cells generated using this approach are still problematic for clinical usage. This study aimed to develop a clinically applicable strategy for generating TM-like cells from iPSCs.

Methods

Highly expressed receptors during iPSC differentiation were identified by AutoSOME, Gene Ontology, and reverse transcription polymerase chain reaction (RT-PCR) analysis. The recombinant cytokines that bind to these receptors were used to generate a new differentiation protocol. The resultant TM-like cells were characterized morphologically, immunohistochemically, and transcriptionally.

Results

We first determined two stages of iPSC differentiation and identified highly expressed receptors associated with the differentiation at each stage. The expression of these receptors was further confirmed by RT-PCR analysis. Exposure to the recombinant cytokines that bind to these receptors, including transforming growth factor beta 1, nerve growth factor beta, erythropoietin, prostaglandin F2 alpha, and epidermal growth factor, can efficiently differentiate iPSCs into TM-like cells, which express TM biomarkers and can form dexamethasone-inducible CLANs.

Conclusions

We successfully generated a xeno- and feeder-free differentiation protocol with recombinant cytokines to generate the TM progenitor and TM-like cells from human iPSCs.

Translational Relevance

The new approach minimizes the risks from contamination and also improves the differentiation efficiency and consistency, which are particularly crucial for clinical use of stem cells in glaucoma treatment.

Endothelial connexin-integrin crosstalk in vascular inflammation

Cardiovascular diseases including blood vessel disorders represent a major cause of death globally. The essential roles played by local and systemic vascular inflammation in the pathogenesis of cardiovascular diseases have been increasingly recognized. Vascular inflammation triggers the aberrant activation of endothelial cells, which leads to the functional and structural abnormalities in vascular vessels. In addition to humoral mediators such as pro-inflammatory cytokines and prostaglandins, the alteration of physical and mechanical microenvironment - including vascular stiffness and shear stress - modify the gene expression profiles and metabolic profiles of endothelial cells via mechano-transduction pathways, thereby contributing to the pathogenesis of vessel disorders. Notably, connexins and integrins crosstalk each other in response to the mechanical stress, and, thereby, play an important role in regulating the mechano-transduction of endothelial cells. Here, we provide an overview on how the inter-play between connexins and integrins in endothelial cells unfold during the mechano-transduction in vascular inflammation.

Quantitative confocal microscopy and calibration for measuring differences in cyclic-di-GMP signalling by bacteria on biomedical hydrogels

The growth of bacterial biofilms on implanted medical devices causes harmful infections and device failure. Biofilm development initiates when bacteria attach to and sense a surface. For the common nosocomial pathogen Pseudomonas aeruginosa and many others, the transition to the biofilm phenotype is controlled by the intracellular signal and second messenger cyclic-di-GMP (c-di-GMP). It is not known how biomedical materials might be adjusted to impede c-di-GMP signalling, and there are few extant methods for conducting such studies. Here, we develop such a method. We allowed P. aeruginosa to attach to the surfaces of poly(ethylene glycol) diacrylate (PEGDA) hydrogels. These bacteria contained a plasmid for a green fluorescent protein (GFP) reporter for c-di-GMP. We used laser-scanning confocal microscopy to measure the dynamics of the GFP reporter for 3 h, beginning 1 h after introducing bacteria to the hydrogel. We controlled for the effects of changes in bacterial metabolism using a promoterless plasmid for GFP, and for the effects of light passing through different hydrogels being differently attenuated by using fluorescent plastic beads as 'standard candles' for calibration. We demonstrate that this method can measure statistically significant differences in c-di-GMP signalling associated with different PEGDA gel types and with the surface-exposed protein PilY1.

Structured nanofilms comprising Laponite® and bone extracellular matrix for osteogenic differentiation of skeletal progenitor cells

Functionalized scaffolds hold promise for stem cell therapy by controlling stem cell fate and differentiation potential. Here, we have examined the potential of a 2-dimensional (2D) scaffold to stimulate bone regeneration. Solubilized extracellular matrix (ECM) from human bone tissue contains native extracellular cues for human skeletal cells that facilitate osteogenic differentiation. However, human bone ECM displays limited mechanical strength and degradation stability under physiological conditions, necessitating modification of the physical properties of ECM before it can be considered for tissue engineering applications. To increase the mechanical stability of ECM, we explored the potential of synthetic Laponite® (LAP) clay as a counter material to prepare a 2D scaffold using Layer-by-Layer (LbL) self-assembly. The LAP and ECM multilayer nanofilms (ECM/LAP film) were successfully generated through electrostatic and protein-clay interactions. Furthermore, to enhance the mechanical properties of the ECM/LAP film, application of a NaCl solution wash step, instead of deionized water following LAP deposition resulted in the generation of stable, multi-stacked LAP layers which displayed enhanced mechanical properties able to sustain human skeletal progenitor cell growth. The ECM/LAP films were not cytotoxic and, critically, showed enhanced osteogenic differentiation potential as a consequence of the synergistic effects of ECM and LAP. In summary, we demonstrate the fabrication of a novel ECM/LAP nanofilm layer material with potential application in hard tissue engineering.

Balancing biological and biomechanical performance in intervertebral disc repair: a systematic review of injectable cell delivery biomaterials

Discogenic back pain is a common condition without approved intervertebral disc (IVD) repair therapies. Cell delivery using injectable biomaterial carriers offers promise to restore disc height and biomechanical function, while providing a functional niche for delivered cells to repair degenerated tissues. This systematic review advances the injectable IVD cell delivery biomaterials field by characterising its current state and identifying themes of promising strategies. Preferred Reporting Items for Systematic Reviews and Meta- Analyses (PRISMA) guidelines were used to screen the literature and 183 manuscripts met the inclusion criteria. Cellular and biomaterial inputs, and biological and biomechanical outcomes were extracted from each study. Most identified studies targeted nucleus pulposus (NP) repair. No consensus exists on cell type or biomaterial carrier, yet most common strategies used mesenchymal stem cell (MSC) delivery with interpenetrating network/co-polymeric (IPN/CoP) biomaterials composed of natural biomaterials. All studies reported biological outcomes with about half the studies reporting biomechanical outcomes. Since the IVD is a load-bearing tissue, studies reporting compressive and shear moduli were analysed and two major themes were found. First, a competitive balance, or 'seesaw' effect, between biomechanical and biological performance was observed. Formulations with higher moduli had inferior cellular performance, and vice versa. Second, several low-modulus biomaterials had favourable biological performance and matured throughout culture duration with enhanced extracellular matrix synthesis and biomechanical moduli. Findings identify an opportunity to develop next-generation biomaterials that provide high initial biomechanical competence to stabilise and repair damaged IVDs with a capacity to promote cell function for long-term healing.

Collagen, stiffness, and adhesion: the evolutionary basis of vertebrate mechanobiology

The emergence of collagen I in vertebrates resulted in a dramatic increase in the stiffness of the extracellular environment, supporting long-range force propagation and the development of low-compliant tissues necessary for the development of vertebrate traits including pressurized circulation and renal filtration. Vertebrates have also evolved integrins that can bind to collagens, resulting in the generation of higher tension and more efficient force transmission in the extracellular matrix. The stiffer environment provides an opportunity for the vertebrates to create new structures such as the stress fibers, new cell types such as endothelial cells, new developmental processes such as neural crest delamination, and new tissue organizations such as the blood-brain barrier. Molecular players found only in vertebrates allow the modification of conserved mechanisms as well as the design of novel strategies that can better serve the physiological needs of the vertebrates. These innovations collectively contribute to novel morphogenetic behaviors and unprecedented increases in the complexities of tissue mechanics and functions.

Mechanotransduction, nanotechnology, and nanomedicine

Mechanotransduction, a conversion of mechanical forces into biochemical signals, is essential for human development and physiology. It is observable at all levels ranging from the whole body, organs, tissues, organelles down to molecules. Dysregulation results in various diseases such as muscular dystrophies, hypertension-induced vascular and cardiac hypertrophy, altered bone repair and cell deaths. Since mechanotransduction occurs at nanoscale, nanosciences and applied nanotechnology are powerful for studying molecular mechanisms and pathways of mechanotransduction. Atomic force microscopy, magnetic and optical tweezers are commonly used for force measurement and manipulation at the single molecular level. Force is also used to control cells, topographically and mechanically by specific types of nano materials for tissue engineering. Mechanotransduction research will become increasingly important as a sub-discipline under nanomedicine. Here we review nanotechnology approaches using force measurements and manipulations at the molecular and cellular levels during mechanotransduction, which has been increasingly play important role in the advancement of nanomedicine.

Soft Matrix Combined With BMPR Inhibition Regulates Neurogenic Differentiation of Human Umbilical Cord Mesenchymal Stem Cells

Stem cells constantly encounter as well as respond to a variety of signals in their microenvironment. Although the role of biochemical factors has always been emphasized, the significance of biophysical signals has not been studied until recently. Additionally, biophysical elements, like extracellular matrix (ECM) stiffness, can regulate functions of stem cells. In this study, we demonstrated that soft matrix with 1-10 kPa can induce neural differentiation of human umbilical cord mesenchymal stem cells (hUC-MSCs). Importantly, we used a combination of soft matrix and bone morphogenetic protein receptor (BMPR) inhibition to promote neurogenic differentiation of hUC-MSCs. Furthermore, BMPR/SMADs occurs in crosstalk with the integrinβ1 downstream signaling pathway. In addition, BMPR inhibition plays a positive role in maintaining the undifferentiated state of hUC-MSCs on the hydrogel substrate. The results provide further evidence for the molecular mechanisms via which stem cells convert mechanical inputs into fateful decisions.

Mechanosensing by Gli1+ cells contributes to the orthodontic force-induced bone remodelling

Objectives

Gli1⁺ cells have received extensive attention in tissue homeostasis and injury mobilization. The aim of this study was to investigate whether Gli1⁺ cells respond to force and contribute to bone remodelling.

Materials and methods

We established orthodontic tooth movement (OTM) model to assess the bone response for mechanical force. The transgenic mice were utilized to label and inhibit Gli1⁺ cells, respectively. Additionally, mice that conditional ablate Yes‐associated protein (Yap) in Gli1⁺ cells were applied in the present study. The tooth movement and bone remodelling were analysed.

Results

We first found Gli1⁺ cells expressed in periodontal ligament (PDL). They were proliferated and differentiated into osteoblastic cells under tensile force. Next, both pharmacological and genetic Gli1 inhibition models were utilized to confirm that inhibition of Gli1⁺ cells led to arrest of bone remodelling. Furthermore, immunofluorescence staining identified classical mechanotransduction factor Yap expressed in Gli1⁺ cells and decreased after suppression of Gli1⁺ cells. Additionally, conditional ablation of Yap gene in Gli1⁺ cells inhibited the bone remodelling as well, suggesting Gli1⁺ cells are force‐responsive cells.

Conclusions

Our findings highlighted that Gli1⁺ cells in PDL directly respond to orthodontic force and further mediate bone remodelling, thus providing novel functional evidence in the mechanism of bone remodelling and first uncovering the mechanical responsive property of Gli1⁺ cells.

Molecular interactions and forces of adhesion between single human neural stem cells and gelatin methacrylate hydrogels of varying stiffness

Single Cell Force Spectroscopy was applied to measure the single cell de-adhesion between human neural stem cells (hNSC) and gelatin methacrylate (GelMA) hydrogel with varying modulus in the range equivalent to brain tissue. The cell de-adhesion force and energy were predominately generated via unbinding of complexes formed between RGD groups of the GelMA and cell surface integrin receptors and the de-adhesion force/energy were found to increase with decreasing modulus of the GelMA hydrogel. For the softer GelMA hydrogels (160 Pa and 450 Pa) it was proposed that a lower degree of cross-linking enables a greater number of polymer chains to bind and freely extend to increase the force and energy of the hNSC-GelMA de-adhesion. In this case, the multiple polymer chains are believed to act together in parallel like 'molecular tensors' to generate tensile forces on the bound receptors until the cell detaches. Counterintuitively for softer substrates, this type of interaction gave rise to higher force loading rates, including the appearance of high and low dynamic force regimes in de-adhesion rupture force versus loading rate analysis. For the stiffer GelMA hydrogel (900 Pa) it was observed that the extension and elastic restoring forces of the polymer chains contributed less to the cell de-adhesion. Due to the apparent lower extent of freely interacting chains on the stiffer GelMA hydrogel the intrinsic RGD groups are presumed to be "more fixed" to the substrate. Hence, the cell de-adhesion is suggested to be mainly governed by the discrete unbinding of integrin-RGD complexes as opposed to elastic restoring forces of polymer chains, leading to smaller piconewton rupture forces and only a single lower dynamic force regime. Intriguingly, when integrin antibodies were introduced for binding integrin α5β1, β1- and αv-subunits it was revealed that the cell modifies the de-adhesion force depending on the substrate stiffness. The antibody binding supressed the de-adhesion on the softer GelMA hydrogel while on the stiffer GelMA hydrogel caused an opposing reinforcement in the de-adhesion. STATEMENT OF SIGNIFICANCE: Conceptual models on cell mechanosensing have provided molecular-level insight to rationalize the effects of substrate stiffness. However most experimental studies evaluate the cell adhesion by analysing the bulk material properties. As such there is a discrepancy in the scale between the bulk properties versus the nano- and micro-scale cell interactions. Furthermore there is a paucity of experimental studies on directly measuring the molecular-level forces of cell-material interactions. Here we apply Single Cell Force Spectroscopy to directly measure the adhesion forces between human neural stem cells and gelatin-methacrylate hydrogel. We elucidate the mechanisms by which single cells bind and physically interact with hydrogels of varying stiffness. The study highlights the use of single cell analysis tools to probe molecular-level interactions at the cell-material interface which is of importance in designing material cues for regulating cell function.

Hierarchical Hydrogel Composite Interfaces with Robust Mechanical Properties for Biomedical Applications

Cells sense and respond to a wide range of external signals, including chemical signals, topography, and interface mechanics, via interactions with the extracellular matrix (ECM), triggering the regulation of behavior and function. The ECM can be considered a hierarchical multiphase porous matrix with various components. Highly porous hydrogel-based biomaterials can mimic the critical ECM properties, to provide mechanical support for tissues and to regulate cellular behaviors, such as adhesion, proliferation, and differentiation. Herein, based on micro/nanoscale-topography-coupled mechanical action, recent advances in the fabrication and application of hydrogel composites with tunable mechanical properties and topography in biomedicine are summarized. In particular, recent findings showing that hydrogels with specifically designed structures not only influence a range of cellular processes and fit the needs of engineered tissues but also have pharmacological effects are emphasized.

Mechanotransduction and Cytoskeleton Remodeling Shaping YAP1 in Gastric Tumorigenesis

The essential role of Hippo signaling pathway in cancer development has been elucidated by recent studies. In the gastrointestinal tissues, deregulation of the Hippo pathway is one of the most important driving events for tumorigenesis. It is widely known that Yes-associated protein 1 (YAP1) and WW domain that contain transcription regulator 1 (TAZ), two transcriptional co-activators with a PDZ-binding motif, function as critical effectors negatively regulated by the Hippo pathway. Previous studies indicate the involvement of YAP1/TAZ in mechanotransduction by crosstalking with the extracellular matrix (ECM) and the F-actin cytoskeleton associated signaling network. In gastric cancer (GC), YAP1/TAZ functions as an oncogene and transcriptionally promotes tumor formation by cooperating with TEAD transcription factors. Apart from the classic role of Hippo-YAP1 cascade, in this review, we summarize the current investigations to highlight the prominent role of YAP1/TAZ as a mechanical sensor and responder under mechanical stress and address its potential prognostic and therapeutic value in GC.

Mechanical Strain Induces Distinct Human Scleral Fibroblast Lineages: Differential Roles in Cell Proliferation, Apoptosis, Migration, and Differentiation

Purpose

The purpose of this study was to explore the effect of mechanical strain on human scleral fibroblasts (HSFs) and compare cell behaviors of HSFs from distinct regions.

Methods

Primary HSFs were cultivated using a digestive protocol. Cells were seeded on collagen I-coated Bioflex plates, and a FX-5000 tension system was used to perform biaxial mechanical strain in vitro. We applied 10%, 0.5-Hz mechanical strain. Cell behaviors of peripapillary and periphery HSFs were compared after the strain. Edu imaging, Cell Counting Kit-8 assay, and cell cycle flow cytometry were conducted to analyze cell proliferation ability. For cell apoptosis, flow cytometry of Annexin V/propidium iodide, caspase 3 activity, and Western blot were performed. Immunofluorescence, real-time PCR, and Western blot were used to investigate cell differentiation. A migration assay was also performed.

Results

Under the mechanical strain of 10%, 0.5 Hz for 24 hours, the proliferation ability and cell apoptosis of peripapillary HSFs did not have a significant change. The expression of alpha-smooth muscle actin (α-SMA) slightly decreased. However, increased cell proliferation, attenuated cell apoptosis and more expression of α-SMA were shown in the periphery HSFs under the same condition. The migration rate was also increased for periphery HSFs, whereas it kept almost the same for peripapillary HSFs under 10%, 0.5-Hz strain for 8 hours.

Conclusions

Mechanical strain affected the cell behaviors of HSFs. The different performance of cells from distinct regions may suggest familial linages of HSFs, probably induced by mechanical strain.

Cell-Matrix Interactions and Matricrine Signaling in the Pathogenesis of Vascular Calcification

Vascular calcification is a complex pathological process occurring in patients with atherosclerosis, type 2 diabetes, and chronic kidney disease. The extracellular matrix, via matricrine-receptor signaling plays important roles in the pathogenesis of calcification. Calcification is mediated by osteochondrocytic-like cells that arise from transdifferentiating vascular smooth muscle cells. Recent advances in our understanding of the plasticity of vascular smooth muscle cell and other cells of mesenchymal origin have furthered our understanding of how these cells transdifferentiate into osteochondrocytic-like cells in response to environmental cues. In the present review, we examine the role of the extracellular matrix in the regulation of cell behavior and differentiation in the context of vascular calcification. In pathological calcification, the extracellular matrix not only provides a scaffold for mineral deposition, but also acts as an active signaling entity. In recent years, extracellular matrix components have been shown to influence cellular signaling through matrix receptors such as the discoidin domain receptor family, integrins, and elastin receptors, all of which can modulate osteochondrocytic differentiation and calcification. Changes in extracellular matrix stiffness and composition are detected by these receptors which in turn modulate downstream signaling pathways and cytoskeletal dynamics, which are critical to osteogenic differentiation. This review will focus on recent literature that highlights the role of cell-matrix interactions and how they influence cellular behavior, and osteochondrocytic transdifferentiation in the pathogenesis of cardiovascular calcification.

Mechanical interactions between bacteria and hydrogels

Mechanical interactions between bacterial cells and extracellular polymeric substance are essential in determining biofilm assembly and disassembly as well the mechanical characteristics of biofilms. However, the physics of these mechanical interactions in different cell culture conditions are poorly understood. We created typical artificial biofilm consisting of planktonic bacteria and hydrogel, in the absence of metabolic or regulatory effect. We have demonstrated that the cell culture medium can significantly affect the mechanical interactions between bacterial cells and hydrogels. The stiffness of the bacteria-hydrogel artificial biofilm cannot be simply attributed by the summation of the contribution from the bacteria and hydrogel based on the mathematical models and computational models. We have revealed that the tryptone component of Luria-Bertani broth medium plays an important role in stiffening effect of bacteria-hydrogel construct. Such significant stiffening effect can be explained by the following mechanism: the presence of tryptone in cell culture medium may enable the bacteria itself to crosslink the hydrogel polymer chains. Our findings have also demonstrated the synergy of modelling and innovative experiments which would potentially impact the biofilm control strategies.

FoxA2 regulates the type II collagen-induced nucleus pulposus-like differentiation of adipose-derived stem cells by activation of the Shh signaling pathway

Adipose tissue-derived stem cell (ADSC)-based therapy is promising for the treatment of intervertebral disc (IVD) degeneration, but the difficulty in inducing nucleus pulposus (NP)-like differentiation limits its clinical applications. Forkhead box (Fox)-A2 is an essential transcription factor for the formation of a normal NP. We demonstrated that type II collagen stimulates NP-like differentiation of ADSCs, partly by increasing the expression of FoxA2. We constructed FoxA2-overexpressing and -knockdown ADSCs by using lentiviral vectors. FoxA2 overexpression significantly enhanced NP-specific gene expression and the synthesis of glycosaminoglycan and collagen, whereas FoxA2 knockdown decreased NP-like differentiation and the expression of aggrecan and collagen II. The enhanced NP-like differentiation related to FoxA2 overexpression was partially rescued by an Shh signaling pathway inhibitor. In addition, FoxA2 inhibited the expression of Itg-α2 and further promoted NP-like differentiation induced by type II collagen. Furthermore, FoxA2-overexpressing ADSCs combined with type II collagen hydrogels promoted regeneration of degenerated NP in vivo. Our findings suggest that FoxA2 plays an essential role in the NP-like differentiation of ADSCs by activating the Shh signaling pathway.-Zhou, X., Ma, C., Hu, B., Tao, Y., Wang, J., Huang, X., Zhao, T., Han, B., Li, H., Liang, C., Chen, Q., Li, F. FoxA2 regulates the type II collagen-induced nucleus pulposus-like differentiation of adipose-derived stem cells by activation of the Shh signaling pathway.

Genipin cross-linked type II collagen/chondroitin sulfate composite hydrogel-like cell delivery system induces differentiation of adipose-derived stem cells and regenerates degenerated nucleus pulposus

Nucleus pulposus (NP) degeneration is usually the origin of intervertebral disc degeneration and consequent lower back pain. Although adipose-derived stem cell (ADSC)-based therapy is regarded to be promising for the treatment of degenerated NP, there is a lack of viable cell carriers to transplant ADSCs into the NP while maintaining cell function. In this study, we developed a type II collagen/chondroitin sulfate (CS) composite hydrogel-like ADSC (CCSA) delivery system with genipin as the cross-linking agent. The induction effect of the scaffold on ADSC differentiation was studied in vitro, and a rat coccygeal vertebrae degeneration model was used to investigate the regenerative effect of the CCSA system on the degenerated NP in vivo. The results showed that the CCSA delivery system cross-linked with 0.02% genipin was biocompatible and promoted the expressions of NP-specific genes. After the injection of the CCSA system, the disc height, water content, extracellular matrix synthesis, and structure of the degenerated NP were partly restored. Our CCSA delivery system uses minimally invasive approaches to promote the regeneration of degenerated NP and provides an exciting new avenue for the treatment of degenerative disc disease.

STATEMENT OF SIGNIFICANCE

Nucleus pulposus (NP) degeneration is usually the origin of intervertebral disc degeneration and consequent lower back pain. Stem cell-based tissue engineering is a promising method in NP regeneration, but there is a lack of viable cell carriers to transplant ADSCs into the NP while maintaining cell function. In this study, we developed a type II collagen/chondroitin sulfate (CS) composite hydrogel-like ADSC (CCSA) delivery system with genipin as the cross-linking agent. Although several research groups have studied the fabrication of injectable hydrogel with biological matrix, our study differs from other works. We chose type II collagen and CS, the two primary native components in the NP, as the main materials and combined them according to the natural ratio of collagen and sGAG in the NP. The delivery system is preloaded with ADSCs and can be injected into the NP with a needle, followed by in situ gelation. Genipin is used as a cross-linker to improve the bio-stability of the scaffold, with low cytotoxicity. We investigated the stimulatory effects of our scaffold on the differentiation of ADSCs in vitro and the regenerative effect of the CCSA delivery system on degenerated NP in vivo.

Control of Mechanotransduction by Molecular Clutch Dynamics

The linkage of cells to their microenvironment is mediated by a series of bonds that dynamically engage and disengage, in what has been conceptualized as the molecular clutch model. Whereas this model has long been employed to describe actin cytoskeleton and cell migration dynamics, it has recently been proposed to also explain mechanotransduction (i.e., the process by which cells convert mechanical signals from their environment into biochemical signals). Here we review the current understanding on how cell dynamics and mechanotransduction are driven by molecular clutch dynamics and its master regulator, the force loading rate. Throughout this Review, we place a specific emphasis on the quantitative prediction of cell response enabled by combined experimental and theoretical approaches.

Engineering Approaches to Study Cellular Decision Making

In their native environment, cells are immersed in a complex milieu of biochemical and biophysical cues. These cues may include growth factors, the extracellular matrix, cell-cell contacts, stiffness, and topography, and they are responsible for regulating cellular behaviors such as adhesion, proliferation, migration, apoptosis, and differentiation. The decision-making process used to convert these extracellular inputs into actions is highly complex and sensitive to changes both in the type of individual cue (e.g., growth factor dose/level, timing) and in how these individual cues are combined (e.g., homotypic/heterotypic combinations). In this review, we highlight recent advances in the development of engineering-based approaches to study the cellular decision-making process. Specifically, we discuss the use of biomaterial platforms that enable controlled and tailored delivery of individual and combined cues, as well as the application of computational modeling to analyses of the complex cellular decision-making networks.

Nanomechanical Force Mapping of Restricted Cell-To-Cell Collisions Oscillating between Contraction and Relaxation

Contact-mediated cell migration strongly determines the invasiveness of the corresponding cells, collective migration, and morphogenesis. The quantitative study of cellular response upon contact relies on cell-to-cell collision, which rarely occurs in conventional cell culture. Herein, we developed a strategy to activate a robust cell-to-cell collision within smooth muscle cell pairs. Nanomechanical traction force mapping reveals that the collision process is promoted by the oscillatory modulations between contraction and relaxation and orientated by the filopodial bridge composed of nanosized contractile machinery. This strategy can enhance the occurrence of cell-to-cell collision, which renders it advantageous over traditional methods that utilize micropatterned coating to confine cell pairs. Furthermore, modulation of the balance between cell tugging force and traction force can determine the repolarization of cells and thus the direction of cell migration. Overall, our approach could help to reveal the mechanistic contribution in cell motility and provide insights in tissue engineering.

Nanopatterned Adhesive, Stretchable Hydrogel to Control Ligand Spacing and Regulate Cell Spreading and Migration

Spatial molecular patterning enables the regulation of adhesion receptor clustering and can thus play a pivotal role in multiple biological activities such as cell adhesion, viability, proliferation, and differentiation. A wide range of nanopatterned, adhesive interfaces have been designed to decipher the essence of molecular-scale interactions between cells and the adhesive interface. Although an interligand spacing of less than 70 nm is a proven prerequisite for the formation of stable focal adhesions, there is a paucity of data concerning how cells behave on substrates featuring heterogeneous adhesiveness. In this study, a stretchable hydrogel functionalized with a quasi-hexagonally arranged nanoarray was stretched along one direction, resulting in ligands periodically arranged in a pattern resembling a centered rectangular lattice with an interligand spacing smaller than 70 nm in one direction and greater than 70 nm in the orthogonal direction. This substrate was utilized to modulate interligand spacing and investigate cell adhesion and migration. An interligand spacing larger than 70 nm-even in just one direction-prevented the establishment of stable focal adhesions. The stretched interface promoted dynamic remodeling at cell contacts, resulting in higher cellular mobility. Our nanopatterned stretchable hydrogel permits reversible control over cell adhesion and migration on nanopatterned ligand interfaces.

Elasticity patterns induced by phase-separation in polymer blend films

Systematical studies on the impact of the thickness of thin films composed of polystyrene (PS) or poly(ethylene oxide) (PEO) on the effective elasticity of polymer-decorated soft polydimethylsiloxane substrate were performed. For both investigated polymer films, elasticity parameter was determined from force-displacement curves recorded using atomic force microscopy. Effective stiffness of supported film grows monotonically with film thickness, starting from the value comparable to the elasticity of soft support and reaching plateau for polymer layers thicker than 200 nm. In contrary, for films cast on hard support no significant thickness dependence of elasticity was observed and the value of elasticity parameter was similar to the one of the substrate. Based on these results, non-conventional method to produce elasticity patterns of various shapes and dimensions induced by phase-separation process in symmetric and asymmetric PS:PEO blend films on soft support was demonstrated. Elevated PS domains were characterized by elasticity parameter 2 times higher than lower PEO matrix. In contrary, adhesion force was increased more than 3 times for PEO regions, as compared to PS areas.

AuNP-Collagen Matrix with Localized Stiffness for Cardiac-Tissue Engineering: Enhancing the Assembly of Intercalated Discs by β1-Integrin-Mediated Signaling

A schematic for the mechanism of accelerating the assembly of intercalated discs (IDs) in cardiac myocytes regulated by gold nanoparticles (AuNPs) is presented. AuNPs with local nanoscale stiffness in the substrate activate β1-integrin signaling, which mediates the activation of integrin-linked kinase (ILK) and its downstream signal kinase by stimulating expression of the transcription factors GATA4 and MEF-2c.