Label-Free Homogeneous Electroanalytical Platform for Pesticide Detection Based on Acetylcholinesterase-Mediated DNA Conformational Switch Integrated with Rolling Circle Amplification

A novel fluorescent sensor for evaluating pH changes in organophosphorus pesticides-treated cells and C. elegans

pH plays an important role in the evaluation of the healthy status in versatile circumstances. The fluctuation of pH could be affected by complex internal and external stimuli. Especially, the abnormal pH changes is a common characteristic of organophosphorus pesticides (OPs)-caused damage owing to the irreversible inhibition of acetylcholinesterase (AChE) activity. Therefore, the rapid and efficient detection of pH changes is of great significance for predicting the OPs poisoning in living system. However, quick and convenient detecting pH levels in living cells is still limited by the lack of effective chemical tools. Here, a novel fluorescent probe TH-1 based on ESIPT mechanism was synthesized, showing specific fluorescent effects in different pH solutions. Importantly, the AChE catalyzed the hydrolysis product of acetylthiocholine iodide (ATCh) and changed the pH of solution, which influence its fluorescent intensity. Moreover, the probe TH-1 was applied to detecting the pH levels in living cells and C. elegans, providing an efficient chemical sensor for revealing the potential mechanisms of OPs in physiological and pathological processes.

A microfluidic paper-based fluorescent sensor integrated with a smartphone platform for rapid on-site detection of omethoate pesticide

A novel approach combing a fluorescent microfluidic paper strip with a portable smartphone-based sensing platform is developed for rapid and sensitive detection of omethoate pesticide. The detection mechanism of the microfluidic paper strip is based on the fluorescence quenching of graphene oxide (GO) toward the cyanine 3 (Cy3)-labeled aptamer (Cy3-APT). Upon exposure to omethoate, the Cy3-APT detaches from the surface of GO, resulting in considerable fluorescence recovery, which can be visualized through the smartphone-based sensing platform. The images are analyzed through a self-developed app embedded with a pretrained convolutional neural network model, achieving a high regression coefficient of 0.9964 at an omethoate concentration range of 0-750 nM. The smartphone-based platform enables rapid on-site detection of omethoate pesticide in real samples within 10 min, with results comparable to those obtained using standard methods. In short, the proposed microfluidic paper-based fluorescent sensor combined with the smartphone-based sensing platform enhances the detection performance toward organophosphorus pesticides.

Construction of label-free electrochemical aptasensor and logic circuit based on triple-stranded DNA molecular switch

BACKGROUND

Pesticide residues can cause chronic toxicity to the human body and lead to a series of diseases that damage the liver. Therefore, developing a highly sensitive, selective, and low-cost pesticide residues detection method is of great significance for protecting human health and safety. Nowadays, commonly used methods for pesticide residue detection include gas chromatography, high-performance liquid chromatography, and fluorescence sensing. These methods have some typical shortcomings, such as long sample pretreatment time, expensive instruments, and poor controllability. It was thought that a sensing platform based on electrochemical analysis method and functional DNA molecules can eliminate the above drawbacks.

RESULTS

Herein, this study developed a simple and label-free electrochemical aptasensor based on a triple-stranded DNA molecular switch. Acetamiprid (ACE) was served as the analytical model, and its binding with the aptamer opened the triple-stranded DNA molecular switch, resulting in the in-situ formation of G-quadruplex/hemin complexes on the electrode surface, obtaining a significantly enhanced electrochemical signal and achieving high specificity and label-free detection of ACE, with a detection limit as low as 4.67 × 10-3 nM (S/N = 3). In addition, due to the specific recognition between the aptamer and the target, the aptasensor effectively avoided the interference of other pesticides and exhibited good specificity. Moreover, benefiting from the pH-switchable of the triple-stranded DNA molecular switch and the programmability of DNA molecules, "OR" logic gate and "OR-INHIBIT" cascade logic circuit were successfully implemented.

SIGNIFICANCE

The proposed electrochemical aptasensor exhibited good accuracy and sensitivity in detecting acetamiprid in vegetable soil sample, indicating its practicality in the detection of pesticide residues in actual samples. Furthermore, the sensing system was reasonably programmed and successfully operated an "OR" logic gate and an "OR-INHIBIT" cascade logic circuit, demonstrating its potential application in intelligent sensing.

Electrochemical Sensors in the Food Sector: A Review

In a world that is becoming increasingly concerned with health, safety, and the sustainability of food supply chains, the control and assurance of food quality have become of utmost importance. This review examines the application and potential of electrochemical sensors in the dynamic field of food science to meet these expanding demands. The article introduces electrochemical sensors and describes their operational mechanics and the components contributing to their function. A summary of the most prevalent electrochemical methods outlines the diverse food analysis techniques available. The review shifts to discussing the food science applications of these sensors, highlighting their crucial role in detecting compounds in food samples like meat, fish, juice, and milk for contemporary quality control. This paper showcases electrochemical sensors' utility in food analysis, underscoring their significance as powerful, efficient tools for maintaining food safety and how they could transform our approach to global food quality control and assurance.

Fluorescent aptasensors for sensitive detection of lead ions based on structure-switching DNA beacon probe and exonuclease I-mediated signal amplification

Herein, two simple fluorescent signal-on sensing strategies for detecting lead ions (Pb2+) were established based on structure-switching aptamer probes and exonuclease-assisted signal amplification strategies. Two hairpin-structure fluorescent probes with blunt-ended stem arms were designed by extending the base sequence of Pb2+ aptamer (PS2.M) and labelling the probes with FAM (in probe 1) and 2-aminopurine (2-AP) (in probe 2), respectively. In method 1, graphene oxide (GO) was added to adsorb probe 1 and quench the fluorescence emission of FAM to achieve low fluorescent background. In method 2, fluorescent 2-AP molecule inserted into the double-stranded DNA of probe 2 was quenched as a result of base stacking interactions, leading to a simplified, quencher-free approach. The addition of Pb2+ can induce the probes to transform into G-quadruplex structures, exposing single DNA strands at the 3' end (the extended sequences). This exposure enables the activation of exonuclease I (Exo I) on the probes, leading to the cleavage effect and subsequent release of free bases and fluorophores, thereby resulting in amplified fluorescence signals. The two proposed methods exhibit good specificity and sensitivity, with detection limits of 0.327 nM and 0.049 nM Pb2+ for method 1 and method 2, respectively, and have been successfully applied to detect Pb2+ in river water and fish samples. Both detection methods employ the structure-switching aptamer probes and can be completed in two or three steps without the need for complex analytical instruments. Therefore, they have a broad prospect in the sensitive and simple detection of lead ion contamination in food and environmental samples.

A label-free ratiometric homogeneous electrochemical aptasensor based on dual catalytic hairpin self-assembly for rapid and sensitive detection of ochratoxin A in food

The food contamination with Ochratoxin A (OTA) has highlighted the need to create precise, sensitive, and convenient techniques. Herein, we proposed a label-free and immobilization-free ratiometric homogeneous electrochemical aptasensor based on dual catalytic hairpin self-assembly (CHA) for OTA detection. Methylene blue (MB) and ferrocene (Fc) in solution were utilized as label-free signaling molecules, generating a response signal (IMB) and a reference signal (IFc), respectively. The ratio of IMB/IFc was utilized as a measure to quantify OTA. Dual CHA was exploited to increase the ratiometric signal and enhance the amplification efficiency. This aptasensor achieved trace-level detection for OTA over a linear range of lower concentrations (1.0 × 10-3 ng/mL-1.0 × 103 ng/mL) with LOD of 92 fg/mL. The aptasensor was successfully applied to detect OTA in cereal and wine, with comparable results of HPLC-MS/MS. This strategy provided a viable platform for rapid, sensitive, and accurate detection of OTA in food.

Catalytic hairpin assembly-driven DNA walker to develop a label-free electrochemical aptasensor for antibiotic detection

An electrochemical aptasensor was developed by utilizing a DNA walker driven by catalytic hairpin assembly (CHA) with kanamycin as the model analyte. Kanamycin bound to the aptamer, causes the release of DNA walker, triggers the CHA reaction, leads to the cyclic movement of the walker's long arm, and results in cascade amplification of the signal. The guanine-rich sequences of the double-stranded products produced by CHA were folded to form G-quadruplex structures, with electrochemical active molecules Hemin embedded, forms G-quadruplex/Hemin complexes in situ on the electrode surface, thereby achieving sensitive, efficient, and label-free detection of kanamycin with a limit of detection (LOD) of 0.27 pM (S/N = 3). Meaningfully, the aptasensor demonstrated high sensitivity and reliability in the detection of kanamycin in milk and livestock wastewater samples, suggesting that it has great potential for application in detecting antibiotics in food products and water samples from the environment.

Development of reusable electrochemiluminescence sensing microchip for detection of vomitoxin

In this work, a reusable DNA sensing microchip was developed for detection of vomitoxin (deoxynivalenol, DON) in sorghum using Cd-based core-shell CdSe@CdS quantum dots (QDs) as promising electrochemiluminescence (ECL) emitter. The size-adjustable aqueous phase CdSe@CdS QDs were prepared through homogeneous method, exhibiting strong cathodic ECL emission with a central wavelength of 520 nm in S2O82- coreactant. And gold nanoparticles-modified iron cobalt cyanide hydrate (Fe-Co-Au) was introduced as an accelerator to amplify the ECL signal. ECL signal was quenched after the formation of a double-stranded (dsDNA) S1-S2 by generating an electron transfer system between the emitter and ferrocene (Fc), which are modified on the aptamer (ssDNA S1) and its complement sequence (ssDNA S2), respectively. When the target DON is presence, the aptamer ssDNA S1 will bind to the DON and trigger the unbinding of double strands DNA and the release of the ssDNA S2, thus the signal can be generated. This approach offers a feasible method for the detection of DON within the range of 1 ng/mL to 200 ng/mL.

Label-Free Ratiometric Homogeneous Electrochemical Strategy Based on Exonuclease III-Aided Signal Amplification for Facile and Rapid Detection of miR-378

MiR-378 is abnormally expressed in various cancers, such as hepatocellular carcinoma, renal cell carcinoma, and nonsmall cell lung cancer. Here, we developed a label- and immobilization-free ratiometric homogeneous electrochemical strategy based on exonuclease III (Exo III) for the facile and rapid determination of miR-378. Two 3'-protruding hairpin DNA probes (HPs) are designed in this strategy. Doxorubicin (DOX) and potassium ferrocyanide (Fe2+) were used as label-free probes to produce a response signal (IDOX) and a reference signal (IFe2+) in the solution phase. When no target was present in the solution, the HP was stable, most of the DOX was intercalated in the stem of the HP, and the diffusion rate of DOX was significantly reduced, resulting in reduced electrochemical signal response. When miR-378 was present, double-cycle signal amplification triggered by Exo III cleavage was initiated, ultimately disrupting the hairpin structures of HP1 and HP2 and releasing a large amount of DOX into the solution, yielding a stronger electrochemical signal, which was low to 50 pM. This detection possesses excellent selectivity, demonstrating high application potential in biological systems, and offers simple and low-cost electrochemical detection for miR-378.

Facile and selective recognition of sulfonylurea pesticides based on the multienzyme-like activities enhancement of nanozymes combining sensor array

Traditional identification methods based on cholinesterase inhibition are limited to recognizing organic phosphorus and carbamate esters, and their response to sulfonylurea pesticides is weak. Residual sulfonylurea pesticides can pose a threat to human health. So, it is very important to develop an effective, rapid and portable method for sulfonylurea pesticides detection. Herein, we first found that sulfonylurea pesticides have activity-enhancing effects on copper-based nanozymes, and then combined them with the array technology to construct a six-channel sensing array method for selectively identifying sulfonylurea pesticides and detecting total concentration of sulfonylurea pesticides (the limit of detection was 0.03 µg/mL). This method has good selectivity towards sulfonylurea pesticides. In addition, a smartphone-based colorimetric paper sensor analysis method was developed to achieve the on-site detection of the total concentration of sulfonylurea pesticides. And this array can also be used for individual differentiation (1-100 µg/mL). Our work not only investigates the specific responses of copper-based nanozymes to sulfonylurea pesticides, but also develops a simple method that contributes to directly detect sulfonylurea pesticides at the source of pollution, providing insights for further research on sulfonylurea pesticides detection and filling the gap in pesticide residue studies.

Coordination-Induced Emissive Poly-NHC-Derived Metallacage for Pesticide Detection

Developing sensitive, rapid, and convenient methods for the detection of residual toxic pesticides is immensely important to prevent irreversible damage to the human body. Luminescent metal-organic cages and macrocycles have shown great applications, and designing highly emissive supramolecular systems in dilute solution using metal-ligand coordination-driven self-assembly is demanded. In this study, we have demonstrated the development of a silver-carbene bond directed tetranuclear silver(I)-octacarbene metallacage [Ag4(L)2](PF6)4 (1) based on an aggregation-induced emissive (AIE) cored 1,1',1″,1‴-((1,4-phenylenebis(ethene-2,1,1-triyl))tetrakis(benzene-4,1-diyl))tetrakis(3-methyl-1H-imidazol-3-ium) salt (L). A 36-fold enhanced emission was observed after metallacage (1) formation when compared with the ligand (L) in dilute solution due to the restriction of intramolecular motions imparted by metal-ligand coordination. Such an increase in fluorescence made 1 a potential candidate for the detection of a broad-spectrum pesticide, 2,6-dichloro-nitroaniline (DCN). 1 was able to detect DCN efficiently by the fluorescence quenching method with a significant detection limit (1.64 ppm). A combination of static and dynamic quenching was applicable depending on the analyte concentration. The use of silver-carbene bond directed self-assembly to exploit coordination-induced emission as an alternative to AIE in dilute solution and then apply this approach to solve health and safety concerns is noteworthy and carries a lot of potential for future developments.

Facile and sensitive detection of mercury ions based on fluorescent structure-switching aptamer probe and exonuclease Ⅲ-assisted signal amplification

Hg2+ is highly toxic to human health and ecosystem. In this work, based on the unique fluorescent property of 2-Aminopurine (2-AP), the formation of T-Hg2+-T mismatch structure and the signal amplification of exonuclease III (Exo III) assisted target cycle, a fluorescent probe for facile and sensitive detection of Hg2+ is constructed. The hairpin-looped DNA probe is rationally designed with 2-AP embedded in the stem and thymine-rich recognition overhangs extended at the termini. The cleavage of the double stranded DNA stem with stable T-Hg2+-T pairs catalyzed by Exo III is prompted to happen upon recognition of trace Hg2+. Under the optimal reaction conditions, there is an excellent linear relationship between Hg2+ concentration and fluorescence intensity in the range of 7.5-200 nM with a detection limit of 0.38 nM. In addition, the detection results of Hg2+ in Songhua River water and fish samples are satisfactory. The fluorescent probe avoids labeling additional quenchers or quenching materials and has strong anti-interference ability. Thus, the fluorescent probe has a broad prospect in practical application.

Bifunctional TiO2 Nanoflower-Induced H4TCBPE Aggregation Enhanced Electrochemiluminescence for an Ultrasensitive Assay of Organophosphorus

In this work, the aggregation-induced emission ligand 1,1,2,2-tetra(4-carboxylbiphenyl)ethylene (H4TCBPE) was rigidified in the Ti-O network to form novel electrochemiluminescence (ECL) emitter H4TCBPE-TiO2 nanospheres, which acted as an effective ECL emitter to construct an "on-off" ECL biosensor for ultrasensitive detection of malathion (Mal). H4TCBPE-TiO2 exhibited excellent ECL responses due to the Ti-O network that can restrict the intramolecular free motions within H4TCBPE and then reduce the nonradiative relaxation. Moreover, TiO2 can act as an ECL co-reaction accelerator to promote the generation of sulfate radical anion (SO4•-), which interacts with H4TCBPE in the Ti-O network to produce enhanced ECL response. In the presence of Mal, numerous ligated probes (probe 1 to probe 2, P1-P2) were formed and released by copper-free click nucleic acid ligation reaction, which then hybridized with hairpin probe 1 (H1)-modified H4TCBPE-TiO2-based electrode surface. The P1-P2 probes can initiate the target-assisted terminal deoxynucleoside transferase (TdTase) extended reaction to produce long tails of deoxyadenine with abundant biotin, which can load numerous streptavidin-functionalized ferrocenedicarboxylic acid polymer (SA-PFc), causing quenching of the ECL signal. Thus, the ultrasensitive ECL biosensor based on H4TCBPE-TiO2 ECL emitter and click chemistry-actuated TdTase amplification strategy presents a desirable range from 0.001 to 100 ng/mL and a detection limit low to 9.9 fg/mL. Overall, this work has paved an avenue for the development of novel ECL emitters, which has opened up new prospects for ECL biosensing.

Dual-mode DNA walker-based optical fiber biosensor for ultrasensitive detection of microRNAs

We present a novel dual-mode DNA-walker based optical fiber biosensor (DMDW-Opt biosensor) for sensitive assay of micro-RNAs in bio-samples. In the sensor system, we develop a new strategy for the cascade amplification, DNA-walker/rolling cycle amplification (RCA), by the use of the residue track of the walker. The strategy can significantly improve the response of the sensor and avoid any tedious operation procedure. Dual-mode readouts, i.e., fluorescence and chemiluminescence, are measured independently without interfering with each other to achieve reliable and accurate analysis. Optical fibers with the surface modified by gold nanoparticles are utilized as the support for fabrication of the sensor, which would be benefit for developing miniaturized and portable sensing devices. The performance of the proposed method is evaluated by using micro-RNAs (MiR-155 and MiR-21) as the analytical target. The method is successfully applied for accurate determination of micoRNAs in human serum and MCF-7 cells. Our method can perform sensitive assays of MiR-155 with limit-of-detection as low as 97.72 fM and 11.22 fM, MiR-21 with limit-of-detection as low as 107.15 fM and 8.32 fM for the fluorescence- and the chemiluminescence-readout respectively, and the biosensor exhibits excellent specificity, reproducibility and storage stability, indicating its valuable potential applications for sensing trace-amount targets in complicated real samples.

Highly-oxidizing Au@MnO2-X nanozymes mediated homogeneous electrochemical detection of organophosphorus independent of dissolved oxygen

Traditional oxidase-like (OXD) nanozymes rely primarily on O2-mediated superoxide anion (O2·-) process for catalytic oxidation and organophosphorus (Ops) detection. While during the actual detection process, the concentration of O2 is inconstant that can be easily changed with the external environment, distorting detection results. Herein, highly-oxidizing Au@MnO2-X nanozymes with core-shell nanostructure are designed which trigger substantial electron transfer from inner Au core to outer ultrathin MnO2-X layer. According to experimental and theoretical calculations, the core-shell nanostructure and ultrathin MnO2-X of Au@MnO2-X result in the large surface defects, high oxygen vacancies and MnIII ratios. The specially structured Au@MnO2-X nanozymes are therefore highly-oxidizing and the catalytic oxidation can be completed merely through electrons transferring instead of the O2-mediated O2·- process. Based on this, an oxygen independent and ultrasensitive nanozyme-based sensor is established using homogeneous electrochemistry (HEC), its Ops is detected at a LOD of 0.039 ng mL-1. Combined with the UV-vis spectrum of 3,3',5,5'-tetramethylbenzidine (TMB), the linear discriminant analysis of five Ops i.e., Ethion, Omethoate, Diazinon, Chlorpyrifos methyl and Dipterex has achieved superior discrimination results. Therefore, HEC based on strong oxidizing nanozymes provide a new avenue for the development of high-performance electrochemical sensors and demonstrate potential applicability to pesticide residue determination in real samples.

Recent advancements in non-enzymatic electrochemical sensor development for the detection of organophosphorus pesticides in food and environment

Organophosphorus Pesticides (OPPs) are among the extensively used pesticides throughout the world to boost agricultural production. However, persistent residues of these toxic pesticides in various vegetables, fruits, and drinking water poses detrimental health effects. Consequently, the rapid monitoring of these harmful chemicals through simple and cost-effective methods has become crucial. In such an instance, electrochemical methods offer simple, rapid, sensitive, reproducible, and affordable detection pathways. To overcome the limitations associated with electrochemical enzymatic sensors, non-enzymatic sensors have emerged as promising and simpler alternatives. The non-enzymatic sensors have demonstrated superior activity, reaching detection limit up to femto (10-15) molar concentration in recent years, leveraging higher selectivity obtained through the molecularly imprinted polymers, synergistic effects between carbonaceous nanomaterials and metals, metal oxide alloys, and other alternative approaches. Herein, this review paper provides an overview of the recent advancements in the development of non-enzymatic electrochemical sensors for the detection of commonly used OPPs, such as Chlorpyrifos (CHL), Diazinon (DZN), Malathion (MTN), Methyl parathion (MP) and Fenthion (FEN). The design method of the electrodes, electrode functioning mechanism, and their analytical performance metrics, such as limit of detection, sensitivity, selectivity, and linearity range, were reviewed and compared. Furthermore, the existing challenges within this rapidly growing field were discussed along with their potential solutions which will facilitate the fabrication of advanced and sustainable non-enzymatic sensors in the future.

How safe is our food we eat? An electrochemical lab-on-kitchen approach towards combinatorial testing for pesticides and GMOs; A case study with edamame

In our daily life, as consumers we are constantly made aware of the impact of pesticides and other modifications to food products derived from genetically modified organisms (GMO's) that have an impact on human health. In our connected world, there is an immense interest for on-demand information about food quality prior to consumption. The gold standard method to detect pesticides or GMOs residues in food is complex and is not amenable to rapid consumer use. In this study, we demonstrate the feasibility of an electrochemical portable sensing approach for the simultaneous direct detection of spiked pesticides chlorpyrifos (Chlp) and GMOs protein Cry1Ab in real edamame soy matrix. The immunoassay based two-plex sensing platform was fabricated using respective antibody's Chlp on one side and Cry1Ab on other side. A simple lab-on-kitchen level preparation of matrix has been demonstrated and sensor response was tested using non-faradaic electrochemical impedance spectroscopy (EIS), which showed a linear response in Cry1Ab/Chlp concentrations from 0.3 ng/mL to 243 ng/mL with limit of detection 0.3 ng /mL for both the target antigens (Cry1Ab and Chlp) respectively. The spiked and recovery test results fall within ± 20% error in real sample matrix which demonstrates the performance of the our platform with maximum residue limit (MRL) for the given targets. Such electrochemical portable multi-analyte direct sensing tool with simple matrix processing protocol can be a future commercial field-testing tool for use at everyday consumer level.

Fluorescence biosensing of the leukemia gene by combining Target-Programmed controllable signal inspiring engineering

Clinical diagnosis urgently requires ultrasensitive, accurate and rapid monitoring of low-abundance biomarkers. A biosensing strategy capable of detecting target genes at the femtomolar scale was designed in this work. In the biosensing strategy, the target can induce the specially designed hairpin probe H1 to self-fold and form a 3' blunt-ended structure. When there are the hybrid double-stranded P1-T1, ligase, polymerase and nickase, the target gene was recycled, and at the same time the system produces a lot of T1 and T2. T1 and T2 can simultaneously trigger HCR, causing the modified fluorophore FAM on the DNA strand to move away from the quencher group BHQ. The amplified fluorescent signal can be captured by a fluorescence instrument. It is exciting for us that three signal amplifications are involved to achieve femtomolar detection of target genes, namely target recycling, dual-triggered HCR of T1 and T2, and HCR. In addition, it still has good detection ability in actual samples simulated by serum. We expect that the sensing strategy proposed in this paper offers great potential for biomarker detection of leukemia for early clinical diagnosis.

Novel colorimetric aptasensor based on MOF-derived materials and its applications for organophosphorus pesticides determination

For the visual detection of four organophosphorus pesticides (OPs), a colorimetric aptasensor was developed based on aptamer-mediated bimetallic metal-organic frameworks (MOFs) nano-polymers. Fe-Co magnetic nanoparticles (MNPs) and Fe-N-C nanozymes were prepared based on pyrolytic reaction, and were labeled with broad spectrum aptamers and complementary chains of organophosphorus pesticides respectively. The hybridization of aptamers and complementary chains led to the formation of nano-polymers. In the presence of target pesticides, they competed with complementary chains for aptamers on Fe-Co MNPs, resulting in a large number of Fe-N-C nanozymes signal labels being released into the supernatant. Fe-N-C nanozymes showed similar activity to peroxidase and catalyzed the 3,3',5,5'-tetramethylbenzidine-hydrogen peroxide (TMB-H₂O₂) color system to turn the solution blue-green under mild conditions. The magnetic probes had good selectivity and sensitivity, and were easily separated by magnetic absorption. The sensor functioned well under optimal conditions, demonstrating good stability and specificity for four pesticides: phorate, profenofos, isocarbophos and omethoate, and the detection limits of four pesticides were as low as 0.16 ng/mL, 0.16 ng/mL, 0.03 ng/mL and 1.6 ng/mL respectively, and the recovery rate of OPs residue in vegetable samples was satisfactory. The work described here provided a simple, rapid and sensitive way to construct a biosensor.

Ternary heterostructures of 1D/2D/2D CuCo2S4/CuS/Ti3C2 MXene: Boosted amperometric sensing for chlorpyrifos

Multicomponent heterogeneous Ti₃C₂ transition metal carbide (MXene)-based materials are receiving extensive research attention due to their interesting synergistic interactions and catalytic properties. However, the morphology-controllable synthesis of heterostructures as structural stabilizers for Ti₃C₂ MXene remains a challenge owing the complicated synthesis procedure. In this work, a kind of ternary heterogeneous nanomaterials CuCo₂S₄/CuS/Ti₃C₂ MXene with a nanorod/nanoplate/nanosheet hybrid architecture is constructed through a one-step low-temperature solvothermal method. The well-designed ternary one-dimensional (1D)/two-dimensional (2D)/2D CuCo₂S₄/CuS/Ti₃C₂ MXene heteromaterials exhibit synergistic improvements in substrate-catalyzed reactions for electrochemical acetylcholinesterase (AChE) biosensor. The Michaelis-Menten constant for the Nafion/AChE/CuCo₂S₄/CuS/Ti₃C₂ MXene/GCE biosensor is 228 μM, which is smaller than ones reported in previous literatures, indicating a higher affinity of the fabricated enzyme biosensor to acetylthiocholine chloride. The biosensor exhibits a well linear relationship with chlorpyrifos concentration ranging from 2.852 × 10^-12 M to 2.852 × 10^-6 M. The multicomponent 1D/2D/2D CuCo₂S₄/CuS/Ti₃C₂ MXene heteromaterial may shine a light in more electrochemical applications.

Construction of a dual-model aptasensor based on G-quadruplexes generated via rolling circle amplification for visual/sensitive detection of kanamycin

A dual-model colorimetric and electrochemical aptasensor was designed using a large number of G-quadruplexes generated by rolling circle amplification (RCA). Specific binding between target and aptamer during RCA yielded large numbers of G-quadruplexes. A colorimetric sensor was fabricated based on the interaction between the G-quadruplex and hemin, which altered the 3,3',5,5'-Tetramethylbenzidine (TMB)-catalyzed color reaction and facilitated the visual and semi-quantitative detection of kanamycin. An electrochemical sensor was constructed based on the strong interaction between the G-quadruplex and the methylene blue electrical signal molecule. Combining nanocomposites multi-walled carbon nanotubes-chitosan/gold nanoparticles (MWCNTs-CS/AuNPs) and RCA realized double-amplified electrochemical signals. Under optimized conditions, a linear relationship was obtained as the logarithm of different concentrations of kanamycin (KAN). The colorimetric aptasensor had a linear range of 1 × 10² nM to 1 × 10³ nM with a detection limit of 1.949 nM. The electrochemical aptasensor had wider a linear range from 1 × 10^-3 nM to 2.5 × 10³ nM and a lower detection limit of 0.333 pM. The sensor combined the advantages of simple colorimetric visualization with the ultra-precision of electrochemical methods. Aptasensor showed good specificity and prevented interference. Furthermore, the prepared dual-model aptasensor facilitated the practical monitoring of KAN in milk.

Nanobody/NanoBiT system-mediated bioluminescence immunosensor for one-step homogeneous detection of trace ochratoxin A in food

Hazardous small molecules in food and environment seriously threatens human health, which requires sensitive and rapid tools for monitoring. Using a previously identified nanobody against ochratoxin A (OTA), we herein proposed a homogeneous sensing platform "nanobody/NanoLuc Binary Technology (NanoBiT) system" and developed a nanobody/NanoBiT system-mediated bioluminescence immunosensor (NBL-Immunosens) for OTA using LgBiT (Lg) and SmBiT (Sm), two subunits of the split nanoluciferase (NanoLuc). The core elements of NBL-Immunosens include Lg-nanobody fusion (NLg) and Sm-labeled OTA-bovine serum albumin conjugate (OSm). The antigen-antibody interaction between NLg and OSm triggers the reconstitution of NanoLuc for generating luminescence signals. Moreover, free OTA can compete with OSm for binding to NLg, resulting the decrease of dose-dependent signals. NBL-Immunosens can detect OTA in a one-step assay of 5 min without washing and exhibit a limit of detection of 0.01 ng/mL with a linear range of 0.04-2.23 ng/mL. It shows high selectivity for OTA and has good accuracy and precision in the spiking-and-recovery experiments. Furthermore, its effectiveness was evaluated with real cereal samples and confirmed by liquid chromatography tandem mass spectrometry and commercial ELISA kits. Hence, the NBL-Immunosens is a very promising tool for rapid, accurate, and selective detection of trace OTA in food.

Homogeneous photoelectrochemical biosensor for sensitive detection of omethoate via ALP-mediated pesticide assay and Bi2S3@Bi2Sn2O7 heterojunction as photoactive material

A simple homogeneous photoelectrochemical (PEC) sensing platform based on an alkaline phosphatase (ALP)-mediated pesticide assay was established for the sensitive detection of omethoate (OM). The Bi₂S₃@Bi₂Sn₂O₇ heterojunction was used as a photoactive material to provide stable background photocurrent signals. The inhibition of OM on ALP and PEC determination was carried out in the homogeneous system. In the absence of OM, dephosphorylation of L-ascorbic acid 2-phosphate trisodium salt (AAP) was catalyzed by ALP to produce the enzyme-catalyzed product (L-ascorbic acid, AA). AA, as an electron donor, could capture photogenerated holes on the Bi₂S₃@Bi₂Sn₂O₇ heterojunction, thus inhibiting the recombination of electron holes to achieve an increase of the photocurrent signal. When the OM was introduced, the enzyme activity of ALP was reduced due to the organophosphorus pesticides (OPs)-based enzyme inhibition, and the AA produced by catalytic hydrolysis was also reduced, thus reducing the photocurrent signal. Compared with the traditional PEC sensor for OPs, this homogeneous PEC sensor avoided immobilization procedures, covalent labeling, separation, and the steric hindrance effect caused by immobilized biomolecules, which achieved high recognition efficiency and caused a reduction in analysis time. Additionally, an ALP-mediated pesticide assay for the determination of OPs with a simplified experimental process further improved the stability and reproducibility of the PEC sensor. The PEC sensor showed high sensitivity to the target OM within a dynamic range of 0.05 ~ 500 ng mL^-1, and the detection limit was 0.0146 ng mL^-1. Additionally, the PEC biosensing system showed good selectivity and anti-interference ability, and exhibited a satisfactory result in spinach and mustard samples. A homogeneous PEC biosensor based on ALP inhibition strategy was constructed for OM detection in vegetable samples via Bi₂S₃@Bi₂Sn₂O₇ heterojunction as the photoactive substrate material.

Nonenzymatic Target-Driven DNA Nanomachine for Monitoring Malathion Contamination in Living Cells and Bioaccumulation in Foods

Intensive applications of toxic malathion pesticides bring a vital threat to the environment and health. Hence, a credible and sensitive strategy is urgently needed for the respective detection of malathion. In this work, an aptamer-based nonenzymatic autonomous DNA walking machine was fabricated for monitoring trace malathion contamination in cells and foods. Along with the machine walking driven by malathion-triggered reaction entropy, multiple fluorescent signal outputs were thermodynamically generated for signal amplification. The proposed stable DNA nanomachine achieved satisfactory results with a detection limit of 81.9 pg L^-1 for testing malathion, which could be applied to actual samples including apple juice, paddy water, and paddy soil. Furthermore, the high stability, sensitivity, and biocompatibility of the nanomachine enabled monitoring of the malathion contamination in living cells and bioaccumulation in lettuce without additional purification. Consequently, with these excellent performances, it is strongly anticipated that the DNA walking machine has tremendous potential to be extended to general platforms against pesticides to avoid malathion-contaminated agricultural production for environmental safety and human health.

Label-free ratiometric homogeneous electrochemical aptasensor based on hybridization chain reaction for facile and rapid detection of aflatoxin B1 in cereal crops

Aflatoxin B1 (AFB1) contamination has raised global concerns in agricultural and food industry; thus, sensitive, accurate and rapid AFB1 sensors are essential in many circumstances. Herein, we developed a label-free and immobilization-free ratiometric homogeneous electrochemical aptasensor based on hybridization chain reaction (HCR) for facile and rapid determination of AFB1. Methylene blue (MB) and ferrocene (Fc) were used as label-free probes to produce a response signal (I_MB) and a reference signal (I_Fc) in solution phase, respectively. The ratio of I_MB/I_Fc was used as a yardstick to quantify AFB1. HCR was exploited to enlarge the intensity of I_MB as well as ratiometric signal. By combining label-free homogeneous assay and ratiometric strategy, the resulting aptasensor offered sensitive, rapid, and reliable determinations of AFB1 with a detection limit of 38.8 pg mL^-1. The aptasensor was then used to determine AFB1 in cereal samples with comparable reliability as HPLC-MS.

Ultrasensitive Uracil-DNA Glycosylase Activity Assay and Its Inhibitor Screening Based on Primer Remodeling Jointly via Repair Enzyme and Polymerase

The development of isothermal nucleic acid amplification techniques has great significance for highly sensitive biosensing in modern biology and biomedicine. A facile and robust exponential rolling circle amplification (RCA) strategy is proposed based on primer-remodeling amplification jointly via a repair enzyme and polymerase, and uracil-DNA glycosylase (UDG) is selected as a model analyte. Two kinds of complexes, complex I and complex II, are preprepared by hybridizing a circular template (CT) with a uracil-containing hairpin probe and tetrahydrofuran abasic site mimic (AP site)-embedded fluorescence-quenched probe (AFP), respectively. The target UDG specifically binds to complex I, resulting in the generation of an AP site, followed by cleavage via endonuclease IV (Endo IV) and the successive trimming of unmatched 3' terminus via phi29 DNA polymerase, thus producing a useable primer-CT complex that actuates the primary RCA. Then, numerous complex II anneal with the first-generation RCA product (RP), generating a complex II-RP assembly containing AP sites within the DNA duplex. With the aid of Endo IV and phi29, AFP, as a pre-primer in complex II, is converted into a mature primer to initiate additional rounds of RCA. So, countless AFPs are cleaved, releasing remarkably strong fluorescent signals. The biosensor is demonstrated to enable rapid and accurate detection of the UDG activity with an improved detection limit as low as 4.7 × 10^-5 U·mL^-1. Moreover, this biosensor is successfully applied for UDG inhibitor screening and complicated biological samples analysis. Compared to the previous exponential RCA methods, our proposed strategy offers additional advantages, including excellent stability, optional design of CT, and simplified operating steps. Therefore, this proposed strategy may create a useful and practical platform for ultrasensitive detection of low levels of analytes in clinical diagnosis and fundamental biomedicine research.

Ultrasensitive detection of butyrylcholinesterase activity based on self-polymerization modulated fluorescence of sulfur quantum dots

Butyrylcholinesterase (BChE) is an important clinical diagnosing index for liver dysfunction and organophosphate toxicity. However, the current assays for BChE activity are suffering from the relative poor detection sensitivity. In this work, an ultrasensitive fluorescence assay for BChE activity was developed based on the self-polymerization modulated fluorescence of sulfur quantum dots (S-dots). The luminescence of S-dots can be quenched by the self-polymerized dopamine. The hydrolysate of substrates, thiocholine, under the catalysis of BChE can reduce dopamine, which results in the inhibition of self-polymerization and the fluorescence recovery of S-dots. BChE can be quantitatively detected by recording the recovered fluorescence of S-dots, and a linear relationship is observed between the ratio of fluorescence and the concentration of BChE in the range from 0.01 to 10 U/L. A limit of detection as low as 0.0069 U/L calculated, which is the lowest number so far. The assay also shows excellent selectivity towards various interference species and acetylcholinesterase. These features allowed the direct detection of BChE activity in human serum, demonstrating the great practical applications of our assay.

Electrochemical detection of T4 polynucleotide kinase activity based on magnetic Fe3O4@TiO2 nanoparticles triggered by a rolling circle amplification strategy

An ultrasensitive electrochemical detection of the activity and inhibition of T4 polynucleotide kinase (T4 PNK) was developed by using magnetic Fe₃O₄@TiO₂ core-shell nanoparticles, which was triggered by a rolling circle amplification strategy (Fe₃O₄@TiO₂-RCA). We used Fe₃O₄@TiO₂ as a substrate to anchor a DNA primer. DNA S1 with 5'-OH termini was phosphorylated in the presence of T4 PNK and ATP, which was adsorbed on the surface of Fe₃O₄@TiO₂ NPs and served as the primer for subsequent RCA reactions. After adding circular template DNA S2, RCA was initiated in the presence of phi29 DNA polymerase and dNTPs. Then, Fc-labeled DNA S3 (Fc-S3) was hybridized with RCA. The obtained Fe₃O₄@TiO₂-RCA was adsorbed on the surface of a magnetic gold electrode (MGE) by magnetic enrichment, resulting in an enhanced electrochemical signal. The T4 PNK activity can be monitored by measuring the electrochemical signal generated. This electrochemical assay is sensitive to the activity of T4 PNK with a dynamic linear range of 0.00001-20 U/mL and a low detection limit of 3.0 × 10^-6 U/mL. The proposed strategy can be used to screen the T4 PNK inhibitors, so it has great potential in the discovery of nucleotide kinase-target drug and early clinical diagnosis of cancer.

Rational engineering the DNA tetrahedrons of dual wavelength ratiometric electrochemiluminescence biosensor for high efficient detection of SARS-CoV-2 RdRp gene by using entropy-driven and bipedal DNA walker amplification strategy

Fast and effective detection of epidemics is the key to preventing the spread of diseases. In this work, we constructed a dual-wavelength ratiometric electrochemiluminescence (ECL) biosensor based on entropy-driven and bipedal DNA walker cycle amplification strategies for detection of the RNA-dependent RNA polymerase (RdRp) gene of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The entropy-driven cyclic amplification reaction was started by the SARS-CoV-2 RdRp gene to generate a bandage. The bandage could combine with two other single-stranded S1 and S2 to form a bipedal DNA walker to create the following cycle reaction. After the bipedal DNA walker completed the walking process, the hairpin structures at the top of the DNA tetrahedrons (TDNAs) were removed. Subsequently, the PEI-Ru@Ti₃C₂@AuNPs-S7 probes were used to combine with the excised hairpin part of TDNAs on the surface of Au-g-C₃N₄, and the signal change was realized employing electrochemiluminescence resonance energy transfer (ECL-RET). By combining entropy-driven and DNA walker cycle amplification strategy, the ratiometric ECL biosensor exhibited a limit of detection (LOD) as low as 7.8 aM for the SARS-CoV-2 RdRp gene. As a result, detecting the SARS-CoV-2 RdRp gene in human serum still possessed high recovery so that the dual-wavelength ratiometer biosensor could be used in early clinical diagnosis.

Portable electrochemical biosensor based on laser-induced graphene and MnO2 switch-bridged DNA signal amplification for sensitive detection of pesticide

Developing portable, quantitative, and user-friendly analytical tools for sensitive pesticide assay is of significant importance for guaranteeing food safety. Herein, a novel electrochemical biosensor was constructed by integrating laser-induced graphene (LIG) electrode on polyimide (PI) foil and MnO₂ nanosheets loaded on the paper for point-of-care test (POCT) of organophosphorus (OPs) residues. The principle of this biosensor relied on acetylcholinesterase (AChE)-catalyzed hydrolytic product-triggered disintegration of MnO₂ nanosheets for releasing assistant DNA to initiate nicking enzyme-aided recycling amplification. In the presence of OPs, the activity of AChE was inhibited and could not initiate the cleavage of the electroactive molecules-labeled hairpin probe on the electrode, resulting in the maintenance of the electrochemical response to realize a "sign-on" determination of OPs. The proposed biosensor exhibited satisfactory analytical performance for OPs assay with a linear range from 3 to 4000 ng/mL and a limit of detection down to 1.2 ng/mL. Moreover, the biosensor was useful for evaluating the residual level of pesticides in the vegetables. Therefore, this novel biosensor holds great promise for OPs assay and opens a new avenue on the development of higher-performance POCT device for sensing applications in the environment and food safety fields.

Flexible photoelectrochemical biosensor for ultrasensitive microRNA detection based on concatenated multiplex signal amplification

Precise microRNA (miRNA) analysis is significant importance for early disease diagnosis. Herein, a novel flexible photoelectrochemical (PEC) biosensor for miRNA determination was developed by employing CdS NPs-modified carbon cloth (CC) on polyimide (PI) film as photoelectric material to provide the PEC responses and an efficient four-stage reaction system as the target recognition and signal amplification unit to improve the analytical performance. In this PEC biosensor, the presence of target miR-21 would trigger the catalytic hairpin assembly (CHA) and the following hybridization chain reaction (HCR) to produce a long dsDNA labeled with numerous biotins, which would further capture a large amount of alkaline phosphatase (ALP) for catalyzing the generation of ascorbic acid (AA). As an efficient electron donor, AA could be oxidized by the photoelectrode, which would initiate a redox cycling amplification process to regenerate AA, resulting in the enhancement of the photocurrent response. Benefitting from the synergistic nucleic acid-based, enzyme catalytic, and chemical signal amplification strategies, the proposed biosensing strategy enabled ultrasensitive miRNA determination. As expected, the PEC biosensor performed satisfactory analytical performances with a linear range of 1 fM to 1 nM and the detection limit down to 0.41 fM. Furthermore, the PEC biosensing strategy exhibited recommendable selectivity, stability, flexibility, and practical applicability. Therefore, this sensing platform provides promising potential for application in bioassay and early diagnosis of disease.

A novel aptasensor based on DNA hydrogel for sensitive visual detection of ochratoxin A

A novel visual detection mode is proposed to improve the detection sensitivity for the determination of ochratoxin A (OTA). The mode is based on aptamer recognition and the signal amplification of rolling circle amplification (RCA) products self-assembled DNA hydrogel. Moreover, gold nanoparticles (AuNPs) were directly assembled inside the DNA hydrogel by adjusting the padlock probe sequences to achieve a stronger binding force between the DNA hydrogel and AuNPs; this avoids the need for modification of AuNPs with DNA sequences. In the presence of OTA, DNA hydrogel is formed. With higher concentrations of OTA, a larger amount of DNA hydrogel is formed. When AuNPs are added to the DNA hydrogel, AuNPs can be enclosed inside the DNA hydrogel. With more DNA hydrogel, there is less AuNPs in the supernatant. Thus, the absorbance of the supernatant is anti-correlated with the concentration of OTA. After optimization of the experimental conditions, the change in the absorbance of the supernatant was linearly correlated with the concentration of OTA, in the range 0.05 to 10 ng/mL; the limit of detection was 0.005 ng/mL. The good specificity of the developed biosensor was confirmed in the presence of other mycotoxins that are coexistent with or analogues of OTA. By comparing the developed method with the ELISA method, the accuracy and stability of this new method were also verified, with good performance obtained in real samples. Diagram of the principle of the colorimetric aptasensor for OTA detection based on rolling circle amplification product self-assembled DNA hydrogel.

Antibody-powered DNA switches to initiate the hybridization chain reaction for the amplified fluorescence immunoassay

Designing antibody-powered DNA nanodevice switches is crucial and fascinating to perform a variety of functions in response to specific antibodies as regulatory inputs, achieving highly sensitive detection by integration with simple amplified methods. In this work, we report a unique DNA-based conformational switch, powered by a targeted anti-digoxin mouse monoclonal antibody (anti-Dig) as a model, to rationally initiate the hybridization chain reaction (HCR) for enzyme-free signal amplification. As a proof-of-concept, both a fluorophore Cy3-labeled reporter hairpin (RH) in the 3' terminus and a single-stranded helper DNA (HS) were individually hybridized with a recognition single-stranded DNA (RS) modified with Dig hapten, while the unpaired loop of RH was hybridized with the exposed 3'-toehold of HS, isothermally self-assembling an intermediate metastable DNA structure. The introduction of target anti-Dig drove the concurrent conjugation with two tethered Dig haptens, powering the directional switch of this DNA structure into a stable conformation. In this case, the unlocked 3'-stem of RH was implemented to unfold the 5'-stem of the BHQ-2-labeled quench hairpin (QH), rationally initiating the HCR between them by the overlapping complementary hybridization. As a result, numerous pairs of Cy3 and BHQ-2 in the formed long double helix were located in spatial proximity. In response to this, the significant quenching of the fluorescence intensity of Cy3 by BHQ-2 was dependent on the variable concentration of anti-Dig, achieving a highly sensitive quantification down to the picomolar level based on a simplified protocol integrated with enzyme-free amplification.

An ultrasensitive homogeneous electrochemical biosensor based on CRISPR-Cas12a

Taking advantage of the high-efficiency indiscriminate ssDNA cleavage activity of Cas12a in combination with the diffusivity difference of methylene blue (MB)-labeled probes (short oligonucleotides/mononucleotides) toward the negatively-charged indium tin oxide (ITO) electrode, a simple, immobilization-free, highly sensitive, and homogeneous electrochemical biosensor for the detection of human papillomavirus (HPV-16) has been fabricated. At the core of the detection process, Cas12a employed ssDNA trans-cleavage capability to achieve short-strand nucleotide cleavage, while MB-labeled probes served as high-efficiency homogeneous electrochemical emitters to achieve differential pulse voltammetric (DPV) signal. Specifically, due to strong electrostatic repulsion, MB-labeled short oligonucleotides (reporter) cannot diffuse freely to the surface of the negatively charged ITO electrode, and only weak electrochemical signals can be detected. The presence of the target HPV-16 can activate the Cas12a complex to perform indiscriminate ssDNA cleavage of the reporter to produce MB-labeled mononucleotides. The MB-labeled mononucleotides with a smaller size have almost no negative charge, so they very easily diffuse to the surface of the ITO electrode and result in an enhanced electrochemical signal response. Different electrochemical responses (DPV peak intensity) of the CRISPR-Cas12a-assisted amplification strategy can be obtained through the diffusion rate of different MB-labeled DNA on the electrode, which is also positively correlated with the input HPV-16 concentration. Given the unique combination of the CRISPR-Cas12a system with the homogeneous electrochemical solution phase, the detection limit is determined to be 3.22 pM (wide dynamic working range from 0.01 nM to 100 nM) and the two-step detection workflow could be completed within 50 min at ambient temperature, which is superior to that of the HPV-based biosensors previously reported.

Sensitive fluorescence and visual detection of organophosphorus pesticides with a Ru(bpy)32+-ZIF-90-MnO2 sensing platform

Fluorescence sensing organophosphorus pesticides (OPs) is of great importance for both food safety and global environment; however, the reported fluorescent probes are usually directly exposed to the external environment, resulting in premature leakage or photobleaching and thus limiting their photostability and assay sensitivity. In this work, a fluorescent sensing platform consisting of a novel luminescent metal-organic framework (Ru(bpy)₃²⁺-ZIF-90) and manganese dioxide nanosheets (MnO₂ NSs) was prepared for sensing OPs. Due to the protection and improvement in the fluorescence of Ru(bpy)₃²⁺ by ZIF-90, the Ru(bpy)₃²⁺-ZIF-90 probe displayed remarkable photostability and high stability in water. By virtue of the high stability of Ru(bpy)₃²⁺-ZIF-90, as well as the outstanding fluorescence quenching and notable recognition ability of the MnO₂ NSs, this sensing platform provided excellent detection capability for parathion-methyl, with a wide concentration range of 0.050-60 ng mL^-1 and a low detection limit of 0.037 ng mL^-1. Additionally, the system exhibited a visual color change with the concentration of the OPs under sunlight. Moreover, satisfactory recoveries ranging from 93.3% to 103.6% were obtained for the real samples. The results indicated that the Ru(bpy)₃²⁺-ZIF-90-MnO₂-based OP sensing platform is promising for applications in food safety and environmental monitoring.

Multienzyme-Targeted Fluorescent Probe as a Biosensing Platform for Broad Detection of Pesticide Residues

Pesticide residues, significantly hampering the overall environmental and human health, have become an increasingly severe issue. Thus, developing rapid, cost-effective, and sensitive tools for monitoring the pesticide residues in food and water is extremely important. Compared to the conventional and chromatographic techniques, enzyme inhibition-based biosensors conjugated with the fluorogenic probes provide effective alternative methods for detecting pesticide residues due to the inherent advantages including high selectivity and sensitivity, simple operation, and capability of providing in situ and real-time information. However, the detection efficiency of a single enzyme-targeted biosensor in practical samples is strongly impeded by the structural diversity of pesticides and their distinct targets. In this work, we developed a strategy of multienzyme-targeted fluorescent probe design and accordingly obtained a novel fluorescent probe (named as 3CP) for detecting the presence of wide variety of pesticides. The designed probe 3CP, targeting cholinesterases, carboxylesterases, and chymotrypsin simultaneously, yielded intense fluorescence in the solid state upon the enzyme-catalyzed hydrolysis. It showed excellent sensitivity against organophosphorus and carbamate pesticides, and the detection limit for dichlorvos achieved 1.14 pg/L. Moreover, it allowed for the diffusion-resistant in situ visualization of pesticides in live cells and zebrafish and the sensitive measurement of organophosphorus pesticides in fresh vegetables, demonstrating the promising potential for tracking the pesticide residues in environment and biological systems.

A novel miniaturized homogeneous label-free electrochemical biosensing platform combining integrated microelectrode and functional nucleic acids

A miniaturized platform combining integrated microelectrode (IME) and functional nucleic acids was developed for homogeneous label-free electrochemical biosensing. IME was constructed with a carbon fiber microelectrode and a platinum wire in a θ type glass tube as a two-electrode system for electrochemical monitoring at microliter level. A newly reported G-triplex/methylene blue (G3/MB) complex was used as the signal generator in the homogeneous label-free electrochemical biosensor. G3 has strong affinity with MB and it can cause significant decrease of the diffusion current of MB after binding. Melamine was chosen as the model target. Since melamine can interact with nucleobase thymine (T) to form T-melamine-T structure through complementary hydrogen bonds, a single-strand functional DNA hairpin structure with poly T and G3 elaborately blocked via base pairing was designed. The presence of melamine can trigger the conformation switching of the DNA hairpin to release the G3. The released G3 combined with MB could therefore change the diffusion current, leading to a simple and rapid detection of melamine. The combination of functional DNA hairpin as target recognition element, G3/MB as signal generator, and IME as transducer provided a "Mix and Measure" miniaturized platform for the construction of homogeneous label-free electrochemical biosensors.

An OliGreen-responsive fluorescence sensor for sensitive detection of organophosphorus pesticide based on its specific selectivity towards T-Hg2+-T DNA structure

In this paper, it was found that OliGreen emitted much stronger fluorescence in rigid T-Hg²⁺-T DNA structure than that in the presence of poly T. Thus, an OliGreen-responsive label-free fluorescent sensor was proposed for sensitive detection of organophosphorus pesticides (OPs) by constructing T-Hg²⁺-T DNA structure. OliGreen emits strong fluorescence in T-Hg²⁺-T structures. The rigid DNA structure of T-Hg²⁺-T is prone to be destroyed by thiocholine (TCh) that hydrolyzed by acetylcholinesterase (AChE) because of the high affinity of TCh with Hg²⁺. As a result, T-Hg²⁺-T DNA structure broke down and the fluorescence intensity of OliGreen decreased greatly. With the inhibition of AChE by OPs, fluorescence intensity of OliGreen remained strong because of the rigid T-Hg²⁺-T DNA structure. Thus, a "turn-on" fluorescent sensor which avoids synthesis of nanomaterials and complex label procedures is proposed based on the fluorescence intensity of OliGreen. DDVP were detected with a wide linear range from 0.005 to 25.0 ng/mL and the detection limit was 2.9 pg/mL, which is more sensitive than previously reported methods.

Nanomaterial-Enabled Sensors and Therapeutic Platforms for Reactive Organophosphates

Unintended exposure to harmful reactive organophosphates (OP), which comprise a group of nerve agents and agricultural pesticides, continues to pose a serious threat to human health and ecosystems due to their toxicity and prolonged stability. This underscores an unmet need for developing technologies that will allow sensitive OP detection, rapid decontamination and effective treatment of OP intoxication. Here, this article aims to review the status and prospect of emerging nanotechnologies and multifunctional nanomaterials that have shown considerable potential in advancing detection methods and treatment modalities. It begins with a brief introduction to OP types and their biochemical basis of toxicity followed by nanomaterial applications in two topical areas of primary interest. One topic relates to nanomaterial-based sensors which are applicable for OP detection and quantitative analysis by electrochemical, fluorescent, luminescent and spectrophotometric methods. The other topic is directed on nanotherapeutic platforms developed as OP remedies, which comprise nanocarriers for antidote drug delivery and nanoscavengers for OP inactivation and decontamination. In summary, this article addresses OP-responsive nanomaterials, their design concepts and growing impact on advancing our capability in the development of OP sensors, decontaminants and therapies.

Electrochemical aptasensors for the detection of hepatocellular carcinoma-related biomarkers

Recent progress in electrochemical aptasensors for the detection of HCC-related biomarkers, including cancer cells, proteins, cell-derived exosomes, and nucleic acids, is reviewed.

Thiol-suppressed I2-etching of AuNRs: acetylcholinesterase-mediated colorimetric detection of organophosphorus pesticides

For the first time it is demonstrated that sulfhydryl compounds can suppress longitudinal etching of gold nanorods via consuming oxidizers, which provides a new signaling mechanism for colorimetric sensing. As a proof of concept, a colorimetric assay is developed for detecting organophosphorus pesticides, which are most widely used in modern agriculture to improve food production but with high toxicity to animals and the ecological environment. Triazophos was selected as a model organophosphorus pesticide. In the absence of triazophos, the active acetylcholinesterase can catalyze the conversion of acetylthiocholine iodide to thiocholine whose thiol group can suppress the I₂-induced etching of gold nanorods. When triazophos is present, the activity of AchE is inhibited, and I₂-induced etching of gold nanorods results in triazophos concentration-dependent color change from brown to blue, pink, and red. The aspect ratio of gold nanorods reduced with gradually blue-shifted longitudinal absorption. There was a linear detection range from 0 to 117 nM (R² = 0.9908), the detection limit was 4.69 nM, and a good application potential was demonstrated by the assay of real water samples. This method will not only contribute to public monitoring of organophosphorus pesticides but also has verified a new signaling mechanism which will open up a new path to develop colorimetric detection methods. It has been first found that sulfhydryl compounds can suppress longitudinal etching of gold nanorods (AuNRs) via consuming oxidizers, which provides a new signaling mechanism for colorimetric sensing. As a proof of concept, a colorimetric assay is developed for sensitively detecting organophosphorus pesticides (OPs). It will not only contribute to public monitoring of OPs but also has verified a new signaling mechanism which will open up a new path to develop multicolor colorimetric methods.

Ultrasensitive split-type electrochemical sensing platform for sensitive determination of organophosphorus pesticides based on MnO2 nanoflower-electron mediator as a signal transduction system

Organophosphorus pesticides (OPs) are extensively used worldwide as agrochemicals; however, excess use may threaten the health of humans. Thus, it is an urgent need to develop a sensitive method for determination of OPs. Herein, a simple and sensitive split-type electrochemical method was developed by using MnO₂ nanoflower-electron mediator as a signal transduction element. The MnO₂ nanoflower-electron mediator was synthesized and shows an excellent electrochemical signal attributed to the high specific surface area of MnO₂ nanoflower. Meanwhile, the inhibition of OPs on butyrylcholinesterase (BChE) was carried out in the homogeneous system. In the absence of target molecule, a large number of thiocholines (TCh) were yielded from hydrolysis of acetylthiocholine (ATCh) by BChE. The MnO₂ nanoflower was cracked, and subsequently, multiple electron mediator molecules were released from the platform after treated with TCh, thus decreasing the electrochemical response. Furthermore, the inhibition of OPs on BChE resulted in the reduced generation of TCh, thus inducing the recovery of electrochemical signal. Under the optimal experimental, dichlorvos can be detected in a wide range of 10^-6-10^-10 M, with a detection limit of 3 × 10^-10 M. Moreover, the assay was successfully used to analyze dichlorvos in cucumber juice and pear juice, showing a great promising potential for detecting organophosphorus pesticides in complex samples. Graphical abstract In this assay, a split-type electrochemical biosensor was proposed for the ultrasensitive determination of organophosphorus pesticides based on the MnO₂ nanoflower-electron mediator as an electrochemical signal component.

Circular Nucleic Acids: Discovery, Functions and Applications

Circular nucleic acids (CNAs) are nucleic acid molecules with a closed-loop structure. This feature comes with a number of advantages including complete resistance to exonuclease degradation, much better thermodynamic stability, and the capability of being replicated by a DNA polymerase in a rolling circle manner. Circular functional nucleic acids, CNAs containing at least a ribozyme/DNAzyme or a DNA/RNA aptamer, not only inherit the advantages of CNAs but also offer some unique application opportunities, such as the design of topology-controlled or enabled molecular devices. This article will begin by summarizing the discovery, biogenesis, and applications of naturally occurring CNAs, followed by discussing the methods for constructing artificial CNAs. The exploitation of circular functional nucleic acids for applications in nanodevice engineering, biosensing, and drug delivery will be reviewed next. Finally, the efforts to couple functional nucleic acids with rolling circle amplification for ultra-sensitive biosensing and for synthesizing multivalent molecular scaffolds for unique applications in biosensing and drug delivery will be recapitulated.