Occurrence and sorption behavior of sulfonamides, macrolides, and trimethoprim in activated sludge treatment

Distribution pattern analysis of multiple antibiotics in the soil-rice system using a QuEChERS extraction method

Antibiotics are commonly released into paddy fields as mixtures via human activities. However, the simultaneous extraction and detection of these chemicals from multiple media are technically challenging due to their different physicochemical properties, resulting in unclear patterns of their transport in the soil-rice system. In this study, a "quick, easy, cheap, effective, rugged, and safe" (QuEChERS) method was developed for the simultaneous analysis of 4 tetracyclines (TCs) and 4 fluoroquinolones (FQs) in the soil and rice tissues from a local poultry farm, and thereby the distribution patterns of the target antibiotics in the soil-rice system and their risk levels to the soil were analyzed. After parameter optimization, the calibration range used for the target antibiotics was 0.1-50 μg/L and each calibration curve was linear with a coefficient of determination (R2 > 0.995); The QuEChERS method achieved satisfactory recovery rates (70.3-124.6%) along with sensitive detection limits (0.005-0.21 ng/g) for TCs and FQs in the soil, root, stem, leaf, and grain. Among the 8 antibiotics, enrofloxacin (ENX), ciprofloxacin (CIP), oxytetracycline (OTC), and doxycycline (DOX) were detected around a poultry farm. The four antibiotics in the collected paddy soils around the poultry farm ranged from 7.1 ng/g to 395.5 ng/g. Notably, ENX and DOX had higher ecological risks (risk quotient values >1) than CIP and OTC in soil. ENX, CIP, and DOX were highly enriched in rice roots with concentrations up to 471.9, 857.3, and 547.4 ng/g, respectively, which were also detected in rice aboveground tissues. The findings may provide both technical and practical guidance for the understanding of antibiotic environmental behavior and risks.

Constructing Heptazine-COF@TiO2 Heterojunction Photocatalysts for Efficient Photodegradation of Acetaminophen under Visible Light

Constructing heterojunction photocatalysts are widely applied to boost the photocatalytic activity of materials. Here, a novel covalent organic framework (COF) material with heptazine units was developed and hybridized with TiO2 nano particles (NPs) to fabricate the Heptazine-COF@TiO2 photocatalysts for acetaminophen (AAP) photodegradation. The successfully assembled heptazine unit endows the Heptazine-COF with outstanding semiconductor property (optical bandgap is 2.53 eV). The synthesized Heptazine-COF@TiO2 hybrids is proved to have the heterojunction structure with high visible light activity and fast charge-carrier mobility, and exhibits better performance in photodegradation of AAP under visible light. The excellent photodegradation efficiency (rate constant: 0.758 min-1) and high reusability (rate constant: 0.452 min-1 in the 6th cycles) of the optimized sample outperform the traditional inorganic photocatalysts and other heterojunction photocatalysts. In addition, these photocatalysts present universal degradation activity for other dyes and antibiotics.

Maize (Zea mays L.) Plants Alter the Fate and Accumulate Nonextractable Residues of Sulfamethoxazole in Farmland Soil

The fate of sulfonamide antibiotics in farmlands is crucial for food and ecological safety, yet it remains unclear. We used [phenyl-U-14C]-labeled sulfamethoxazole (14C-SMX) to quantitatively investigate the fate of SMX in a soil-maize system for 60 days, based on a six-pool fate model. Formation of nonextractable residues (NERs) was the predominant fate for SMX in unplanted soil, accompanied by minor mineralization. Notably, maize plants significantly increased SMX dissipation (kinetic constant kd = 0.30 day-1 vs 0.17 day-1), while substantially reducing the NER formation (92% vs 58% of initially applied SMX) and accumulating SMX (40%, mostly bound to roots). Significant NERs (maximal 29-42%) were formed via physicochemical entrapment (determined using silylation), which could partially be released and taken up by maize plants. The NERs consisted of a considerable amount of SMX formed via entrapment (1-8%) and alkali-hydrolyzable covalent bonds (2-12%, possibly amide linkage). Six and 10 transformation products were quantified in soil extracts and NERs, respectively, including products of hydroxyl substitution, deamination, and N-acylation, among which N-lactylated SMX was found for the first time. Our findings reveal the composition and instability of SMX-derived NERs in the soil-plant system and underscore the need to study the long-term impacts of reversible NERs.

Fate of contaminants of emerging concern in two wastewater treatment plants after retrofitting tertiary treatment for reduction of nitrogen discharge

More and more previously designed wastewater treatment plants (WWTPs) are upgraded to tertiary treatment to meet the higher effluent discharge standards of conventional pollutants. Contaminants of emerging concern (CECs) can cause adverse effects on organisms and usually flow into WWTPs along with urban sewage. How the retrofitted WWTPs targeting conventional pollutants will influence the treatment efficiency of CECs is seldom discussed. This study investigates the removal of CECs in two full-scale newly retrofitted WWTPs (CD and JM WWTPs), containing high-efficiency sedimentation tank and denitrification deep bed filter for enhancing total nitrogen removal. The overall CEC removal efficiencies in the CD and JM WWTPs were 73.79 % and 93.63 %, respectively. Mass balance results indicated that CD WWTP and JM WWTP release a total of 36.89 and 88.58 g/d of CECs into the environment through effluent and excess sludge, respectively. Analysis of the concentration of CECs along the treatment process revealed most CECs were removed in the biological treatment units. The incorporation of newly constructed tertiary treatment proved beneficial for CEC removal and removed 2.93 % and 2.36 % CECs, corresponding to CEC removal of 2.92 and 27.49 g/d in the CD and JM WWTPs, respectively. The data of this study were further used to evaluate the suitability of the SimpleTreat model for simulating the fate of CECs in WWTPs. The predicted fraction of CECs discharged through the biological treatment effluent were generally within ten-fold difference from the measured results, highlighting its potential for estimating CEC removal in WWTPs.

Occurrence, fate, and ecological risk of antibiotics in wastewater treatment plants in China: A review

This review offers a comprehensive overview of the occurrence, fate, and ecological risk associated with six major categories of antibiotics found in influent, effluent, and sludge from urban wastewater treatment plants (WWTPs) in China. Further exploration includes examining the correlation between antibiotic residual rates in the effluents and process parameters of urban WWTPs across the country. Lastly, a nationwide and urban cluster-specific evaluation of the ecological risk posed by antibiotics in WWTPs is conducted. The findings reveal that the average concentrations of antibiotics in influent, effluent, and sludge from urban WWTPs in China are 786.2 ng/L, 311.2 ng/L, and 186.8 μg/kg, respectively. Among the detected antibiotics, 42% exhibit moderate to high ecological risk in the effluent, with ciprofloxacin, sulfamethoxazole, erythromycin, azithromycin, and tetracycline posing moderate to high ecological risks in sludge. The current biological treatment processes in WWTPs demonstrate inefficacy in removing antibiotics. Hence, there is a pressing need to develop and integrate innovative technologies, such as advanced oxidation processes. This review aims to offer a more comprehensive understanding and identify priority antibiotics for control to effectively manage antibiotic pollution within WWTPs at both national and regional levels.

Eat seldom is better than eat frequently: Pharmaceuticals degradation kinetics, enantiomeric profiling and microorganisms in moving bed biofilm reactors are affected by feast famine cycle times

Feast-famine (FF) regimes improved the removal of recalcitrant pharmaceuticals in moving bed biofilm reactors (MBBRs), but the optimal FF cycle remained unresolved. The effects of FF cycle time on the removal of bulk substrates (organic carbon and nitrogen) and trace pharmaceuticals by MBBR are systematically evaluated in this study. The feast to famine ratio was fixed to 1:2 to keep the same loading rate, but the time for the FF cycles varied from 18 h to 288 h. The MBBR adapted to the longest FF cycle time (288 h equaling 48 × HRT) resulted in significantly higher degradation rates (up to +183%) for 12 out of 28 pharmaceuticals than a continuously fed (non-FF) reactor. However, other FF cycle times (18, 36, 72 and 144 h) only showed a significant up-regulation for 2-3 pharmaceuticals compared to the non-FF reactor. Enantioselective degradation of metoprolol and propranolol occurred in the second phase of a two phase degradation, which was different for the longer FF cycle time. N-oxidation and N-demethylation pathways of tramadol and venlafaxine differed across the FF cycle time suggestin the FF cycle time varied the predominant transformation pathways of pharmaceuticals. The abundance of bacteria in the biofilms varied considerably between different FF cycle times, which possibly caused the biofilm to remove more recalcitrant bulk organic C and pharmaceuticals under long cycle times.

Chemometric modeling of pharmaceuticals for partitioning between sludge and aqueous phase during the wastewater treatment process

Computational techniques, such as quantitative structure-property relationships (QSPRs), can play a significant role in exploring the important chemical features essential for the degree of sorption or sludge/water partition coefficient (Kd) towards sewage sludge of wastewater treatment process to evaluate the environmental consequence and risk of pharmaceuticals. The current research work aims to construct a predictive QSPR model for the sorption of 148 diverse active pharmaceutical ingredients (APIs) in sewage sludge during wastewater treatment. For the development of the model, we employed easily computable 2D descriptors as independent variables. The model has been developed following the Organization for Economic Cooperation and Development's (OECD) guidelines. It has undergone internal and external validation using a variety of methodologies, as well as been tested for its applicability domain. A measure of hydrophobicity, i.e., MLOGP2, showed the most promising contribution in modeling the sorption coefficient of APIs. Among other parameters, the number of tertiary aromatic amines, the presence of electronegative atoms like N, O, and Cl, the size of a molecule, the number of aromatic hydroxyl groups, the presence of substituted aromatic nitrogen atoms and alkyl-substituted tertiary carbon atoms were also found to be influential for the regulation of solid water partition coefficient of APIs during the wastewater treatment process. The statistical validity tests performed on the developed partial least squares (PLS) model showed that it is statistically evident, robust, and predictive (R2Train = 0.750, Q2LOO = 0.683, Q2F1 = 0.655, Q2F2 (or R2Test) = 0.651). In addition, the predictivity of the constructed model was further inspected by using the "prediction reliability indicator" tool for 14 external APIs.

Peroxymonosulfate activation by nanocomposites towards the removal of sulfamethoxazole: Performance and mechanism

Heterogeneous activation of peroxomonosulfate (PMS) has been extensively studied for the degradation of antibiotics. The cobalt ferrite spinel exhibits good activity in the PMS activation, but suffers from the disadvantage of low PMS utilization efficiency. Herein, the nanocomposites including FeS, CoS2, CoFe2O4 and Fe2O3 were synthesized by hydrothermal method and used for the first time to activate PMS for the removal of sulfamethoxazole (SMX). The nanocomposites showed superior catalytic activity in which the SMX could be completely removed at 40 min, 0.1 g L-1 nanocomposites and 0.4 mM PMS with the first order kinetic constant of 0.2739 min-1. The PMS utilization efficiency was increased by 29.4% compared to CoFe2O4. Both radicals and non-radicals contributed to the SMX degradation in which high-valent metal oxo dominated. The mechanism analysis indicated that sulfur modification, on one hand, enhanced the adsorption of nanocomposites for PMS, and promoted the redox cycles of Fe2+/Fe3+ and Co2+/Co3+ on the other hand. This study provides new way to enhance the catalytic activity and PMS utilization efficiency of spinel cobalt ferrite.

Bio-degraded of sulfamethoxazole by microbial consortia without addition nutrients: Mineralization, nitrogen removal, and proteomic characterization

Sulfamethoxazole (SMX) is widely employed as an antibiotic, while its residue in environment has become a common public concern. Using 100 mg/L SMX as the sole nutrient source, the acclimated sludge obtained by this study displayed an excellent SMX degradation performance. The addition of SMX resulted in significant microbiological differentiation within the acclimated sludge. Microbacterium (6.6%) was identified as the relatively dominant genera in metabolism group that used SMX as sole carbon source. Highly expressed proteins from this strain strongly suggested its essential role in SMX degradation, while the degradation of SMX by other strains (Thaurea 78%) in co-metabolism group appeared to also rely on this strain. The interactions of differentially expressed proteins were primarily involved in metabolic pathways including TCA cycle and nitrogen metabolism. It is concluded that the sulfonamides might serve not only as the carbon source but also as the nitrogen source in the reactor. A total of 24 intermediates were identified, 13 intermediates were newly reported. The constructed pathway suggested the mineralizing and nitrogen conversion ability towards SMX. Batch experiments also proved that the acclimated sludge displayed ability to biodegrade other sulfonamides, including SM2 and SDZ and SMX-N could be removed completely.

Short-term mass loads of per- and polyfluoroalkyl substances in a wastewater treatment plant from South China

Wastewater treatment plants (WWTPs) are one of the most important sources and sinks for per- and polyfluoroalkyl substances (PFAS). However, limited studies have evaluated short-term temporal variability of PFAS in WWTPs, particularly for their intra-day variations. For this purpose, a time-composite sampling campaign was carried out at a WWTP influent from South China for 1 week. Five out of ten PFAS were found in the influent, i.e., perfluoroheptanoic acid (PFHpA), perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), perfluorobutane sulfonic acid (PFBS), and perfluorooctanesulfonic acid (PFOS). PFOA was the most domain PFAS whereas PFOS was detected occasionally, which might be associated with the prohibition of PFOS use in China. For the first time, we observed significant intra-day fluctuations in mass fluxes for PFOS. Different from a morning peak of pharmaceuticals reported previously, PFOS mass loads fluctuated sharply at noon and night on the weekdays. Furthermore, the mass fluxes of PFOA on the weekend were significantly elevated. For the other PFAS detected, no significant diurnal variations in mass loads were identified. Correlation analysis indicated that domestic activities (e.g., home cleaning) are likely to be the major source of these perfluorocarboxylic acids especially PFOA. In addition, flow fluxes had little effects on these PFAS mass load. These results can aid in future sampling campaigns and optimizing removal strategies for PFAS in wastewater.

Strain-level diversity in sulfonamide biodegradation: adaptation of Paenarthrobacter to sulfonamides

The widespread occurrence of sulfonamides raises significant concerns about the evolution and spread of antibiotic resistance genes. Biodegradation represents not only a resistance mechanism but also a clean-up strategy. Meanwhile, dynamic and diverse environments could influence the cellular function of individual sulfonamide-degrading strains. Here, we present Paenarthrobacter from different origins that demonstrated diverse growth patterns and sulfonamide-degrading abilities. Generally, the degradation performance was largely associated with the number of sadA gene copies and also relied on its genotype. Based on the survey of sad genes in the public database, an independent mobilization of transposon-borne genes between chromosome and plasmid was observed. Insertions of multiple sadA genes could greatly enhance sulfonamide-degrading performance. Moreover, the sad gene cluster and sadA transposable element showed phylogenetic conservation currently, being identified only in two genera of Paenarthrobacter (Micrococcaceae) and Microbacterium (Microbacteriaceae). Meanwhile, Paenarthrobacter exhibited a high capacity for genome editing to adapt to the specific environmental niche, opening up new opportunities for bioremediation applications.

Effect of bicarbonate on nitrate-induced photosensitive degradation of sulfamethoxazole under UV irradiation

In this study, the influence of HCO3- on NO3--induced photosensitive degradation of sulfamethoxazole (SMX) under UV irradiation was investigated. It was found that the removal of SMX by UV in the presence of NO3- improved significantly compared to its photolysis, which was confirmed to be due to the role of hydroxyl radical (HO•) formed through UV-activated NO3-. However, the addition of HCO3- in UV/NO3- system could further enhance SMX degradation, which was verified to be ascribed to the formed carbonate radical (CO3•-) through the reaction of HCO3- with HO•. The second-order rate constant of CO3•- with SMX was determined to be 2.58 × 108 M-1 s-1. In UV/NO3-/HCO3- system, the reactive species for SMX removal were HO• and CO3•-, and the contribution of CO3•- to SMX degradation might be much higher than that of HO•. The concentration of NO3- was almost unchanged after reaction in UV/NO3- and UV/NO3-/HCO3- systems because of its regeneration. Based on the detected four transformation products, the possible degradation pathways of SMX in UV/NO3-/HCO3- system were proposed including hydroxylation, amino-oxidation and bond cleavage.

Removal of emerging micropollutants from nanofiltration retentate of municipal wastewater within biological fixed-bed reactors under nitrifying and denitrifying conditions

Municipal water resource recovery facilities are not designed to eliminate micropollutants, leading to many pollutants entering the aquatic environment. Within this study, as part of the project MicroStop, the biological treatment of nanofiltration effluent (retentate) under pure aerobic (without nitrification) as well as nitrifying and denitrifying conditions has been investigated for micropollutant elimination. A potential of further biotransformation under increased hydraulic retention time (HRT) of 14 days was shown. Under both HRT of 7 and 14 days, eliminations below LOQ were achieved in the aerated bioreactor for gabapentin, iomeprol, and metoprolol, reaching > 95%, > 69 to > 92%, and > 72%, respectively. The reduction of diclofenac was positively influenced by longer HRT leading to an elimination of up to 67%. Sulfamethoxazole was reduced under denitrification, but accumulated under aeration, resulting in fluctuating results and an overall elimination of 78% under 14 days HRT. PRACTITIONER POINTS: The micropollutant elimination in fixed-bed bioreactors of highly concentrated nanofiltration retentate was studied. Pure aerobic (without nitrification), nitrifying, and denitrifying conditions were investigated under hydraulic retention times (HRT) of 7 and 14 days. Higher initial pollutant concentrations enhanced the biological degradability in attached growth for substances being moderately degradable in activated sludge systems. 4A potential of further biological micropollutant elimination was shown for gabapentin, iomeprol, metoprolol, and diclofenac.

Simulated-sunlight enhances membrane aerated biofilm reactor performance in sulfamethoxazole removal and antibiotic resistance genes reduction

Membrane aerated biofilm reactors (MABRs) can be used to treat domestic wastewater containing sulfamethoxazole (SMX) because of their favorable performance in the treatment of refractory pollutants. However, biologics are generally subjected to antibiotics stress, which induces the production of antibiotic resistance genes (ARGs). In this study, a simulated-sunlight assisted MABR (L-MABR) was used to promote SMX removal and reduce ARGs production. The SMX removal efficiency of the l-MABR system was 9.62 % superior to that of the MABR system (83.13 %). In contrast from MABR, in the l-MABR, only 28.75 % of SMX was removed through microbial activity because functional bacteria were inactivated through radiation by simulated sunlight. In addition, photolysis (64.61 %) dominated SMX removal, and the best performing indirect photolysis process was the excited state of effluent organic matters (3EfOMs*). Through photolysis, ultraviolet (UV) and reactive oxygen species (ROS) enriched the SMX removal route, resulting in the SMX removal pathway in the l-MABR no longer being limited by enzyme catalysis. More importantly, because of the inactivation of functional bacteria, whether in the effluent or biofilm, the copy number of ARGs in the l-MABR was 1-3 orders of magnitude lower than that in the MABR. Our study demonstrates the feasibility of utilizing simulated-sunlight to enhance the antibiotic removal efficiency while reducing ARG production, thus providing a novel idea for the removal of antibiotics from wastewater.

Review of experimental biodegradation data on pharmaceuticals and comparison with predictive BIOWIN models

In this study the experimental data on the biodegradation of 16 pharmaceuticals in activated sludge were reviewed and also the theoretical biodegradation of these pharmaceuticals was calculated using BIOWIN models. The main aim was to show the similarities or discrepancies between the two. Experimental data were critically reviewed considering biodegradation rates, biodegradation mechanisms and biosorption of pharmaceuticals. For some pharmaceuticals, theoretical BIOWIN estimations and experimental findings deviated from each other. For example, if only BIOWIN estimations are considered, clarithromycin, azithromycin and ofloxacin would be defined as refractory. However, in experimental studies, they appeared to be not completely refractory. One of the reasons is that in most cases pharmaceuticals could be used as secondary substrates in the presence of sufficient bulk organic matter. In addition, all experimental studies indicate that at long Solids Retention Times (SRTs), nitrification activity becomes enhanced and the enzyme AMO leads to the cometabolic elimination of many pharmaceuticals. BIOWIN models prove to be very helpful for having an initial idea about biodegradability of pharmaceuticals. However, in order to estimate the biodegradability under real conditions, the models can be extended to include the different removal mechanisms reported in this study.

Strategy for improvement of molecular oxygen activation capacity of PPECu by chlorine doping for water decontamination

The activation of molecular oxygen and generation of reactive oxygen species (ROS) play important roles in the efficient removal of contaminants from aqueous ecosystems. Herein, using a simple and rapid solvothermal process, we developed a chlorine-doped phenylethynylcopper (Cl/PPECu) photocatalyst and applied it to visible light degradation of sulfamethazine (SMT) in aqueous media. The Cl/PPECu was optimized to have a 2.52 times higher steady-state concentration of O2•- (3.62 × 10-5 M) and a 28.87 times higher degradation rate constant (0.2252 min-1) for SMT compared to pure PPECu. Further, the effectiveness of Cl/PPECu in treating sulfonamide antibiotics (SAs) in real water systems was verified through an investigation involving natural water bodies, SAs, and ambient sunlight. The energy band structure, DFT calculation and correlation heat map indicated that the addition of chlorine modulated the local electronic structure of PPECu, leading to an improvement in the electron-hole separation, enhanced the O2 activation, and promoted the generation of ROSs. This study not only puts forward innovative ideas for the eco-compatible remediation of environmental pollution using PPECu, but also sheds new light on the activation of oxygen through elemental doping.

Clarithromycin as soil and environmental pollutant: Adsorption-desorption processes and influence of pH

Antibiotics pollution is a growing environmental issue, as high amounts of these compounds are found in soil, water and sediments. This work studies the adsorption/desorption of the macrolide antibiotic clarithromycin (CLA) for 17 agricultural soils with different edaphic characteristics. The research was carried out using batch-type experiments, with an additional assessment of the specific influence of pH for 6 of the soils. The results show that CLA adsorption reaches between 26 and 95%. In addition, the fit of the experimental data to adsorption models provided values between 1.9 and 19.7 Ln μmol1-n kg-1 for the KF, Freundlich affinity coefficient, and between 2.5 and 10.5 L kg-1 for Kd, distribution constant of Linear model. Regarding the linearity index, n, it varied between 0.56 and 1.34. Desorption showed lower scores than adsorption, with an average of 20%, and with values of 3.1 and 93.0 Ln μmol1-n kg-1 for KF(des) and 4.4 and 95.0 L kg-1 for Kd(des). The edaphic characteristics with the highest influence on adsorption were the silt fraction content and the exchangeable Ca content, while in the case of desorption, they were the total nitrogen, organic carbon, and exchangeable Ca and Mg contents. Regarding the pH, within the range studied (between 3 and 10), its value did not decisively affect the adsorption/desorption process. Overall, the set of these results could be of help to program appropriate measures leading to the retention/elimination of this antibiotic when it reaches the environment as a pollutant.

Fate of emerging contaminants in a sequencing batch reactor and potential of biological activated carbon as tertiary treatment for the removal of persisting contaminants

The study aims to understand the occurrence and removal of 20 emerging contaminants (ECs) in each unit process of a sequencing batch reactor-based wastewater treatment plant (WWTP) and explore the potential of biological activated carbon (BAC) for the treatment of residual ECs and organic matter in the secondary effluent. Analgesic-acetaminophen, anti-inflammatory drug-ibuprofen, and stimulant-caffeine were detected at high concentrations in the influent. Most of the removal was observed in the biological treatment stage in the SBR basins. The mass load of the ECs was 2.93 g/d in the secondary effluent and 0.4 g/d in the final sludge, while the total removal of the mass load of ECs till the secondary treatment stage was 93.22%. 12 of the 20 ECs were removed by more than 50%, while carbamazepine (negative removal), sulfamethoxazole, and trimethoprim were removed by less than 20%. As a polishing step and to remove residual ECs, two BAC units were studied for 11,000 bed volumes (324 days). Packed column studies on granular activated carbon were conducted, and GAC development to BAC was monitored. SEM and FTIR were used to confirm and characterize the BAC. The BAC appeared to be more hydrophobic than the GAC. The BAC removed 78.4% and 40% of the dissolved ECs and organic carbon at an optimum EBCT of 25 min. Carbamazepine, sulfamethoxazole, and trimethoprim were removed by 61.5, 84, and 52.2%, respectively. Parallel column tests revealed adsorption as an important mechanism for the removal of positively charged compounds. The results indicate that the BAC is an effective tertiary/polishing technique for removing organic and micropollutants in the secondary wastewater effluent.

The fate of sulfonamides in microenvironments of rape and hot pepper rhizosphere soil system

Sulfonamides (SAs) in agricultural soils can be degraded in rhizosphere, but can also be taken up by vegetables, which thereby poses human health and ecological risks. A glasshouse experiment was conducted using multi-interlayer rhizoboxes to investigate the fate of three SAs in rape and hot pepper rhizosphere soil systems to examine the relationship between the accumulation and their physicochemical processes. SAs mainly entered pepper shoots in which the accumulation ranged from 0.40 to 30.64 mg kg-1, while SAs were found at high levels in rape roots ranged from 3.01 to 16.62 mg kg-1. The BCFpepper shoot exhibited a strong positive linear relationship with log Dow, while such relationship was not observed between other bioconcentration factors (BCFs) and log Dow. Other than lipophilicity, the dissociation of SAs may also influence the uptake and translocation process. Larger TF and positive correlation with log Dow indicate preferential translocation of pepper SAs. There was a significant (p < 0.05) dissipation gradient of SAs observed away from the vegetable roots. In addition, pepper could uptake more SAs under solo exposure, while rape accumulated more SAs under combined exposure. When SAs applied in mixture, competition between SAs might occur to influence the translocation and dissipation patterns of SAs.

Effective bioremediation of clarithromycin and diclofenac in wastewater by microbes and Arundo donax L

Bioremediation of pharmaceuticals has gained large research efforts, but there is still a need to improve the performance of bioremediation systems by selecting effective organisms. In this study, we characterized the capability to remove clarithromycin (CLA) and diclofenac (DCF) by the bacterium Streptomyces rochei, and the fungi Phanerochaete chrysosporium and Trametes versicolor. The macrolide antibiotic CLA and the non-steroid anti-inflammatory DCF were selected because these are two of the most frequently detected drugs in water bodies. Growth and content of the PhCs and a DCF metabolite (MET) by the energy crop Arundo donax L. were also evaluated under hydroponic conditions. The removal rate (RR) by S. rochei increased from 24 to 40% at 10 and 100 µg CLA L-1, respectively, averaged over incubation times. At 144 h, the RR by P. chrysosporium was 84%, while by T. versicolor was 70 and 45% at 10 and 100 CLA µg L-1. The RR by S. rochei did not exceed 30% at 1 mg DCF L-1 and reached 60% at 10 mg DCF L-1, whereas approached 95% and 63% by P. chrysosporium and T. versicolor, respectively, at both doses. Root biomass and length of A. donax were strongly affected at 100 µg CLA L-1. CLA concentration in roots and shoots increased with the increase of the dose and translocation factor (TF) was about 1. DCF severely affected both shoot fresh weight and root length at the highest dose and concentration in roots and shoots increased with the increase of the dose. DCF concentrations were 16-19 times higher in roots than in shoots, and TF was about 0.1. MET was detected only in roots and its proportion over the parent compound decreased with the increase of the DCF dose. This study highlights the potential contribution of A. donax and the tested microbial inoculants for improving the effectiveness of bioremediation systems for CLA and DCF removal.

Ranking the risks of eighty pharmaceuticals in surface water of a megacity: A multilevel optimization strategy

Pharmaceuticals in freshwater posed ecological risks to aquatic ecosystem, however, most risk assessments of pharmaceuticals were conducted at screening level, which were limited by the availability of the toxicity data. In this study, risks of 80 pharmaceuticals including 35 antibiotics, 13 antiviral drugs, 13 illicit drugs, and 19 antidepressants in surface water of Beijing were assessed with a proposed multilevel environmental risk optimization strategy. Target pharmaceuticals were detected in surface water samples with the detection frequency from 1.7 % to 100 % and the total concentrations from 31.1 ng/L to 2708 ng/L. Antiviral drugs were the dominant pharmaceuticals. Preliminary screening-level risk assessment indicated that 20 pharmaceuticals posed low to high risks with risk quotient from 0.14 (chloroquine diphosphate) to 27.8 (clarithromycin). Thirteen pharmaceuticals were recognized with low to high risks by an optimized risk assessment method. Of them, the refined probabilistic risk assessment of joint probability curves coupling with a quantitative structure activity relationship-interspecies correlation estimation (QSAR-ICE) model was applied. Clarithromycin, erythromycin and ofloxacin were identified to pose low risks with maximum risk products (RP) of 1.23 %, 0.41 % and 0.35 %, respectively, while 10 pharmaceuticals posed de minimis risks. Structural equation modeling disclosed that human land use and climate conditions influenced the risks of pharmaceuticals by indirectly influencing the concentrations of pharmaceuticals. The results indicated that the multilevel strategy coupling with QSAR-ICE model was appropriate and effective for screening priority pollutants, and the strategy can be used to prioritize pharmaceuticals and other emerging contaminants in the aquatic environment.

Antimicrobial Transformation Products in the Aquatic Environment: Global Occurrence, Ecotoxicological Risks, and Potential of Antibiotic Resistance

The global spread of antimicrobial resistance (AMR) is concerning for the health of humans, animals, and the environment in a One Health perspective. Assessments of AMR and associated environmental hazards mostly focus on antimicrobial parent compounds, while largely overlooking their transformation products (TPs). This review lists antimicrobial TPs identified in surface water environments and examines their potential for AMR promotion, ecological risk, as well as human health and environmental hazards using in silico models. Our review also summarizes the key transformation compartments of TPs, related pathways for TPs reaching surface waters and methodologies for studying the fate of TPs. The 56 antimicrobial TPs covered by the review were prioritized via scoring and ranking of various risk and hazard parameters. Most data on occurrences to date have been reported in Europe, while little is known about antibiotic TPs in Africa, Central and South America, Asia, and Oceania. Occurrence data on antiviral TPs and other antibacterial TPs are even scarcer. We propose evaluation of structural similarity between parent compounds and TPs for TP risk assessment. We predicted a risk of AMR for 13 TPs, especially TPs of tetracyclines and macrolides. We estimated the ecotoxicological effect concentrations of TPs from the experimental effect data of the parent chemical for bacteria, algae and water fleas, scaled by potency differences predicted by quantitative structure-activity relationships (QSARs) for baseline toxicity and a scaling factor for structural similarity. Inclusion of TPs in mixtures with their parent increased the ecological risk quotient over the threshold of one for 7 of the 24 antimicrobials included in this analysis, while only one parent had a risk quotient above one. Thirteen TPs, from which 6 were macrolide TPs, posed a risk to at least one of the three tested species. There were 12/21 TPs identified that are likely to exhibit a similar or higher level of mutagenicity/carcinogenicity, respectively, than their parent compound, with tetracycline TPs often showing increased mutagenicity. Most TPs with increased carcinogenicity belonged to sulfonamides. Most of the TPs were predicted to be mobile but not bioaccumulative, and 14 were predicted to be persistent. The six highest-priority TPs originated from the tetracycline antibiotic family and antivirals. This review, and in particular our ranking of antimicrobial TPs of concern, can support authorities in planning related intervention strategies and source mitigation of antimicrobials toward a sustainable future.

Investigating the Transformation Products of Selected Antibiotics and 17 α-Ethinylestradiol under Three In Vitro Biotransformation Models for Anticipating Their Relevance in Bioaugmented Constructed Wetlands

The degradation of three antibiotics (sulfamethoxazole, trimethoprim, and ofloxacin) and one synthetic hormone (17 α-ethinylestradiol) was investigated in three in-vitro biotransformation models (i.e., pure enzymes, hairy root, and Trichoderma asperellum cultures) for anticipating the relevance of the formation of transformation products (TPs) in constructed wetlands (CWs) bioaugmented with T. asperellum fungus. The identification of TPs was carried out employing high-resolution mass spectrometry, using databases, or by interpreting MS/MS spectra. An enzymatic reaction with β-glucosidase was also used to confirm the presence of glycosyl-conjugates. The results showed synergies in the transformation mechanisms between these three models. Phase II conjugation reactions and overall glycosylation reactions predominated in hairy root cultures, while phase I metabolization reactions (e.g., hydroxylation and N-dealkylation) predominated in T. asperellum cultures. Following their accumulation/degradation kinetic profiles helped in determining the most relevant TPs. Identified TPs contributed to the overall residual antimicrobial activity because phase I metabolites can be more reactive and glucose-conjugated TPs can be transformed back into parent compounds. Similar to other biological treatments, the formation of TPs in CWs is of concern and deserves to be investigated with simple in vitro models to avoid the complexity of field-scale studies. This paper brings new findings on the emerging pollutants metabolic pathways established between T. asperellum and model plants, including extracellular enzymes.

Biosorption and biotransformation behaviours of veterinary antibiotics under aerobic livestock wastewater treatment processes

To study the fate of veterinary antibiotics released from swine wastewater treatment plants (SWTP), 10 antibiotics were investigated in each unit of a local SWTP periodically. Over a 14-month period of field investigation into target antibiotics, it was confirmed that tetracycline, chlortetracycline, sulfathiazole, and lincomycin were used in this SWTP, with their presence observed in raw manure. Most of these antibiotics could be effectively treated by aerobic activated sludge, except for lincomycin, which was still detected in the effluent, with a maximum concentration of 1506 μg/L. In addition, the potential for removing antibiotics was evaluated using lab-scale aerobic sequencing batch reactors (SBRs) that were dosed with high concentrations of antibiotics. The SBR results, however, showed that both sulfonamides and macrolides, as well as lincomycin, can achieve 100% removal in lab-scale aerobic SBRs within 7 days. This reveals that the potential removal of those antibiotics in field aeration tanks can be facilitated by providing suitable conditions, such as adequate dissolved oxygen, pH, and retention time. Furthermore, the biosorption of target antibiotics was also confirmed in the abiotic sorption batch tests. Biotransformation and hydrolysis were identified as the dominant mechanism for removing negatively charged sulfonamides and positively charged antibiotics (macrolides and lincomycin) in SBRs. This is due to their relatively low sorption affinity (resulting in negligible to 20% removal) onto activated sludge in abiotic sorption tests. On the other hand, tetracyclines exhibited significant sorption behavior both onto activated sludge and onto soluble organic matters in swine wastewater supernatant, accounting for 70%-91% and 21%-94% of removal within 24 h, respectively. S-shape sorption isotherms with saturation were observed when high amounts of tetracyclines were spiked into sludge, with equilibrium concentrations ranging from 0.4 to 65 mg/L. Therefore, the sorption of tetracyclines onto activated sludge was governed by electrostatic interaction rather than hydrophobic partition. This resulted in a saturated sorption capacity (Q_max) of 17,263 mg/g, 1637 mg/g, and 641.7 mg/g for OTC, TC, and CTC, respectively.

Seasonal analysis of commonly prescribed antibiotics in Istanbul city

Antibiotics are among the most common medicine groups since they are used to treat infectious diseases, as nutritional supplements in livestock breeding, and for preservation in the food industry. Turkey is among the highest antibiotic consumers in the world. In the present study, the most popular 14 antibiotics available in Turkey were monitored in one hospital sewage and two urban wastewater treatment plant influents and effluents seasonally in Istanbul province, the largest metropolitan center in Turkey. The present research aimed to develop a robust analytical method to determine 14 antibiotics, including six chemical groups, in environmental matrices which are considered significant antibiotic pollution sources, namely hospital sewage and urban wastewater. Solid-phase extraction (SPE) and UPLC-MS/MS analysis parameters included optimized column temperature, eluent, mobile phase, and flow rate. Three SPE cartridges were employed in recovery studies. The antibiotic recovery rates varied between 40 and 100%, and all analytes were identified within 3 min with UPLC-MS/MS under optimal conditions. It was determined that method detection limits (MDLs) varied between 0.07 and 2.72 µg/L for the antibiotics. In all seasons, the highest beta-lactam group antibiotic concentrations were identified in hospital sewage. The season with the greatest variety of antibiotics in urban wastewater was spring. Clarithromycin and ciprofloxacin were the antibiotics determined at the highest concentration in the influent and effluent of the wastewater treatment plant in all seasons. This study showed that the most widely used beta-lactam group antibiotics were found in high amounts in hospital sewage wastewater but in low concentrations in the treatment plants, and hence, it is seen that the degradability of beta-lactam group antibiotics was high. The presence of clarithromycin, ciprofloxacin, lincomycin, levofloxacin, and trimethoprim antibiotics in hospital sewage in higher amounts and also in inlet and outlet of wastewater treatment plants proves that those are resistant antibiotics.

Using integrative samplers to estimate the removal of pharmaceuticals and personal care products in a WWTP and by soil aquifer treatment enhanced with a reactive barrier

The need and availability of freshwater is a major environmental issue, aggravated by climate change. It is necessary to find alternative sources of freshwater. Wastewater could represent a valid option but requires extensive treatment to remove wastewater-borne contaminants, such as contaminants of emerging concern (CECs). It is urgent to develop not only sustainable and effective wastewater treatment techniques, but also water quality assessment methods. In this study, we used polar organic chemical integrative samplers (POCIS) to investigate the presence and abatement of contaminants in an urban wastewater treatment plant (WWTP) and in soil aquifer treatment (SAT) systems (a conventional one and one enhanced with a reactive barrier). This approach allowed us to overcome inter-day and intraday variability of the wastewater composition. Passive sampler extracts were analyzed to investigate contamination from 56 pharmaceuticals and personal care products (PPCPs). Data from the POCIS were used to estimate PPCPs' removal efficiency along the WWTP and the SAT systems. A total of 31 compounds, out of the 56 investigated, were detected in the WWTP influent. Removal rates along WWTP were highly variable (16-100 %), with benzophenone-3, benzophenone-1, parabens, ciprofloxacin, ibuprofen, and acetaminophen as the most effectively removed chemicals. The two SAT systems yielded much higher elimination rates than those achieved through the primary and secondary treatments together. The SAT system that integrated a reactive barrier, based on sustainable materials to promote enhanced elimination of CECs, was significantly more efficient than the conventional one. The removal of the recalcitrant carbamazepine and its epoxy- metabolite was especially remarkable in this SAT, with removal rates between 69-81 % and 63-70 %, respectively.

Synergistic degradation of trimethoprim and its phytotoxicity via the UV/chlorine process: Influencing factors on removal and kinetic

Occurrence of trimethoprim (TMP), recalcitrant antibiotic, and its adverse effect on ecosystem have been reported in several countries. The study aims to remove the TMP and its phytotoxicity via a UV/chlorine process, compared with chlorination and UV irradiation alone. Various treatment conditions including chlorine doses, pHs, and TMP concentrations was conducted with synthetic waters and effluent waters. The UV/chlorine process exhibited a synergistic effect on the TMP removal, compared with chlorination and UV irradiation alone. The UV/chlorine process was the most effective in removing TMP, followed by chlorination. The UV irradiation slightly affected the TMP removal (less than 5%). The UV/chlorine process completely removed TMP by 15 min contact time, while chlorination for 60 min could achieve 71% of TMP removal. The TMP removal fitted well with the pseudo first-order kinetics, and the rate constant (k') increased with higher chlorine doses, lower TMP concentrations and low pH. HO• was the major oxidant affecting the TMP removal and its degradation rate, compared with other reactive chlorine species (e.g., Cl•, OCl•). The TMP exposure increased the phytotoxicity by decreasing a germination rate of Lactuca sativa and Vigna radiata seeds. The use of UV/chlorine process could effectively detoxify the TMP, resulting in the phytotoxicity level of treated waters equivalent or lower than those of TMP-free effluent water. The detoxification level depended on the TMP removal, and it was about 0.43-0.56 times of TMP removal. The findings indicated the potential use of UV/chlorine process in removing TMP residual and its phytotoxicity.

Mass flow and consumption calculations of pharmaceuticals in sewage treatment plant with emphasis on the fate and risk quotient assessment

In Egypt, pharmaceuticals consumption increased dramatically owing to the population growth and the unrestricted sale manner. Accordingly, the occurrence and fate of nine common pharmaceutical active compounds (PhACs) were scrutinized at a sewage treatment plant (STP) in Giza, Egypt. The levels of these PhACs were assessed in different the wastewater treatment stages and dewatered sludge phase using high-performance liquid chromatography coupled with photodiode arrays detector. The average concentrations of the total PhACs detected in influent, primary sedimentation effluent (PSE) and final effluent (FE) were 227, 155 and 89 µg L^-1, respectively. The overall removal efficiency of the individual PhACs ranged from 18 to 72% removal. The occurrence trend revealed that biodegradation and adsorption are the concurrently removal mechanisms of the studied PhACs. The overall consumption per day in West of Greater Cairo was estimated based on influent concentration of STP. Sulfamethoxazole, paracetamol and diclofenac were detected with the highest levels in the influent of STP, PSE and FE as well as in the dewatered sludge. Furthermore, the high concentrations of these compounds in the sludge confirm the adsorption pathway removal of theses PhACs. The risk quotient (RQ) assessment for the detected PhACs in FE is greatly higher than the predicted non-effect concentration (PNEC). Conclusively, the FE of STP is considered a risky source for PhACs in adjacent surface water.

Seasonal distribution and dynamic evolution of antibiotics and evaluation of their resistance selection potential and ecotoxicological risk at a wastewater treatment plant in Jinan, China

The seasonal distribution and dynamic evolution of antibiotics in wastewater from main treatment areas and in sludge and their resistance selection potential and ecotoxicological risk were studied at a municipal wastewater treatment plant in Jinan, East China. Ten antibiotics were selected, and all were detected in wastewater and sludge samples, with fluoroquinolones showing the highest detection concentrations and frequencies. Seasonal fluctuations in the antibiotic concentrations in the influent, effluent, and sludge were observed, with the highest values in winter in most cases. The dynamic evolution of antibiotics during the treatment process differed among the seasons. The antibiotic removal efficiencies were incomplete, ranging from - 40.47 to 100%. Mass balance analysis showed that sulfonamides, roxithromycin, and metronidazole were mainly removed through biological processing, whereas fluoroquinolones, doxycycline, and chloramphenicol were removed through sludge adsorption. Levofloxacin, as well as a mixture of the 10 antibiotics from the effluent, could pose a low ecotoxicological risk to Daphnia in the receiving waters. Additionally, levofloxacin and ciprofloxacin in the effluent and ciprofloxacin and metronidazole in the sludge may facilitate the selection of antibiotic-resistant bacteria in the environment.

Risk ranking of macrolide antibiotics - Release levels, resistance formation potential and ecological risk

Antibiotic resistance (AR) development in natural water bodies is a significant source of concern. Macrolide antibiotics in particular have been identified as pollutants of concern for AR development throughout the literature, as well as by state and international authorities. This study utilises a probabilistic model to examine the risk of AR development arising from human-use macrolide residues, utilising administration rates from Ireland as a case study. Stages modelled included level of administration, excretion, degradation in wastewater, removal in wastewater treatment, assuming conventional activated sludge (CAS) treatment, and dilution. Release estimates per day, as well as risk quotient values for antibiotic resistance development and ecological impact, are generated for erythromycin, clarithromycin, and azithromycin. In the modelled scenario in which conventional activated sludge treatment is utilised in wastewater treatment, this model ranks risk of resistance development for each antibiotic in the order clarithromycin > azithromycin > erythromycin, with mean risk quotient values of 0.50, 0.34 and 0.12, respectively. A membrane bioreactor scenario was also modelled, which reduced risk quotient values for all three macrolides by at least 50 %. Risk of ecological impact for each antibiotic was also examined, by comparing environmental concentrations predicted to safety limits based on toxicity data for cyanobacteria and other organisms from the literature, with azithromycin being identified as the macrolide of highest risk. This study compares and quantifies the risk of resistance development and ecological impact for a high-risk antibiotic group in the Irish context, and demonstrates the potential for risk reduction achieved by adoption of alternative (e.g. membrane bioreactor) technology.

Seasonal variation and ecological risk assessment of Pharmaceuticals and Personal Care Products (PPCPs) in a typical semi-enclosed bay - The Bohai Bay in northern China

The Bohai Bay as a typical semi-enclosed bay in northern China with poor water exchange capacity and significant coastal urbanization, is greatly influenced by land-based inputs and human activities. As a class of pseudo-persistent organic pollutants, the spatial and temporal distribution of Pharmaceuticals and Personal Care Products (PPCPs) is particularly important to the ecological environment, and it will be imperfect to assess the ecological risk of PPCPs for the lack of systematic investigation of their distribution in different season. 14 typical PPCPs were selected to analyze the spatial and temporal distribution in the Bohai Bay by combining online solid-phase extraction (SPE) and HPLC-MS/MS techniques in this study, and their ecological risks to aquatic organisms were assessed by risk quotients (RQs) and concentration addition (CA) model. It was found that PPCPs widely presented in the Bohai Bay with significant differences of spatial and seasonal distribution. The concentrations of ∑PPCPs were higher in autumn than in summer. The distribution of individual pollutants also showed significant seasonal differences. The high values were mainly distributed in estuaries and near-shore outfalls. Mariculture activities in the northern part of the Bohai Bay made a greater contribution to the input of PPCPs. Caffeine, florfenicol, enrofloxacin and norfloxacin were the main pollutants in the Bohai Bay, with detection frequencies exceeding 80 %. The ecological risk of PPCPs to algae was significantly higher than that to invertebrates and fish. CA model indicated that the potential mixture risk of total PPCPs was not negligible, with 34 % and 88 % of stations having mixture risk in summer and autumn, respectively. The temporary stagnation of productive life caused by Covid-19 weakened the input of PPCPs to the Bohai Bay, reducing the cumulative effects of the pollutants. This study was the first full-coverage investigation of PPCPs in the Bohai Bay for different seasons, providing an important basis for the ecological risk assessment and pollution prevention of PPCPs in the bay.

Wide-scope target and suspect screening of emerging contaminants in sewage sludge from Nigerian WWTPs by UPLC-qToF-MS

There is currently a paucity of scientific data in Africa on the analysis and occurrence of emerging contaminants in sewage sludge. In this work, the occurrence of European Union (EU) Water Framework Directive priority substances and wide-range emerging contaminants were investigated and discussed comprehensively in the sewage sludge samples from three different wastewater treatment plants (WWTPs) in Lagos, Nigeria. The identification strategy was implemented by target and suspect screening in liquid chromatography-high resolution mass spectrometry. 250 compounds were identified in the sewage sludge samples from the investigated WWTPs. From 250 detected compounds, 182 compounds were quantified, and 78 compounds significantly show high environmental risk score (calculated from provisional no-effect concentrations values (PNEC) as well as their environmental quality data (EQs)). Most of contaminants detected at high amount belong to pharmaceuticals and are from hospital WWTP. While the highest concentration (72.4 mg kg^-1) was measured for salicylic acid (a non-steroidal anti-inflammatory drug), antibiotics showed high concentrations up to 24.4 and 28.4 mg kg^-1 for ciprofloxacin and ofloxacin, respectively. Three simple factors including frequency of exceedance, frequency of occurrence and extent of exceedance were used to aid prioritization of these substances in future monitoring campaigns. This work presents the first comprehensive and wide-scope screening of a large number of emerging contaminants in sewage sludge from Nigerian WWTPs.

Occurrence, fate, and risk assessment of antibiotics in typical pharmaceutical manufactories and receiving water bodies from different regions

This study aimed to investigate the presence and persistence of antibiotics in wastewater of four typical pharmaceutical manufactories in China and receiving water bodies and suggest the removal of antibiotics by the wastewater treatment process. It also evaluated the environmental impact of antibiotic residues through wastewater discharge into receiving water bodies. The results indicated that thirteen antibiotics were detected in wastewater samples with concentrations ranging from 57.03 to 726.79 ng/L. Fluoroquinolones and macrolides were the most abundant antibiotic classes found in wastewater samples, accounting for 42.5% and 38.7% of total antibiotic concentrations, respectively, followed by sulfonamides (16.4%) and tetracyclines (2.4%). Erythromycin-H2O, lincomycin, ofloxacin, and trimethoprim were the most frequently detected antibiotics; among these antibiotics, the concentration of ofloxacin was the highest in most wastewater samples. No significant difference was found in different treatment processes used to remove antibiotics in wastewater samples. More than 50% of antibiotics were not completely removed with a removal efficiency of less than 70%. The concentration of detected antibiotics in the receiving water bodies was an order of magnitude lower than that in the wastewater sample due to dilution. An environmental risk assessment showed that lincomycin and ofloxacin could pose a high risk at the concentrations detected in effluents and a medium risk in their receiving water bodies, highlighting a potential hazard to the health of the aquatic ecosystem. Overall, The investigation was aimed to determine and monitor the concentration of selected antibiotics in 4 typical PMFs and their receiving water bodies, and to study the removal of these substances in PMFs. This study will provide significant data and findings for future studies on antibiotics-related pollution control and management in water bodies.

A critical review on retaining antibiotics in liquid digestate: Potential risk and removal technologies

Substantial levels of antibiotics remain in liquid digestate, posing a significant threat to human safety and the environment. A comprehensive assessment of residual antibiotics in liquid digestate and related removal technologies is required. To this end, this review first evaluates the potential risks of the residual antibiotics in liquid digestate by describing various anaerobic digestion processes and their half-lives in the environment. Next, emerging technologies for removing antibiotics in liquid digestate are summarized and discussed, including membrane separation, adsorption, and advanced oxidation processes. Finally, this study comprehensively and critically discusses these emerging technologies' prospects and challenges, including techno-economic feasibility and environmental impacts.

Multiclass target analysis of contaminants of emerging concern including transformation products, soil bioavailability assessment and retrospective screening as tools to evaluate risks associated with reclaimed water reuse

The occurrence of 200 multiclass contaminants of emerging concern (CECs) encompassing 168 medicinal products and transformation products (TPs), 5 artificial sweeteners, 12 industrial chemicals, and 15 other compounds was investigated in influent and effluent wastewater samples collected during 7 consecutive days from 5 wastewater treatment plants (WWTPs) located in Cyprus. The methodology included a generic solid-phase extraction protocol using mixed-bed cartridges followed by Ultra-High Performance Liquid Chromatography coupled with Quadrupole-Time of Flight Mass Spectrometry (UHPLC-QTOF-MS) analysis. A total of 63 CECs were detected at least in one sample, with 52 and 55 out of the 200 compounds detected in influents and effluents, respectively. Ten (10) out of the 24 families of parent compounds and associated TPs were found in the wastewater samples (influent or effluent). 1-H-benzotriazole, carbamazepine, citalopram, lamotrigine, sucralose, tramadol, and venlafaxine (>80 % frequency of appearance in effluents) were assessed with respect to their bioavailability in soil as part of different scenarios of irrigation with reclaimed water following a qualitative approach. A high score of 12 (high probability) was predicted for 2 scenarios, a low score of 3 (rare occasions) for 2 scenarios, while the rest 28 scenarios had scores 5-8 (unlikely or limited possibility) and 9-11 (possibly). Retrospective screening was performed with the use of a target database of 2466 compounds and led to the detection of 158 additional compounds (medicinal products (65), medicinal products TPs (15), illicit drugs (7), illicit drugs TPs (3), industrial chemicals (11), plant protection products (25), plant protection products TPs (10), and various other compounds (22). This work aspires to showcase how the presence of CECs in wastewater could be investigated and assessed at WWTP level, including an expert-based methodology for assessing the soil bioavailability of CECs, with the aim to develop sustainable practices and enhance reclaimed water reuse.

Degradation of sulfamethoxazole by chlorination in water distribution systems: Kinetics, toxicity, and antibiotic resistance genes

Sulfamethoxazole (SMX) is one of veterinary drugs and food additives, which has been frequently detected in surface waters in recent years and will cause damage to organisms. Therefore, SMX was selected as a target to be investigated, including the degradation kinetics, evolution of toxicity, and antibiotic resistance genes (ARGs) of SMX during chlorination in batch reactors and water distribution systems (WDS), to determine the optimal factors for removing SMX. In the range of investigated pH (6.3-9.0), the SMX degradation had the fastest rate at close to neutral pH. The chlorination of SMX was affected by the initial total free chlorine concentration, and the degradation of SMX was consistent with second-order kinetics. The rate constants in batch reactors are (2.23 ± 0.07) × 10²  M^-1  s^-1 and (5.04 ± 0.30) × 10 M^-1  s^-1 for HClO and ClO^-1 , respectively. Moreover, the rate constants in WDS are (1.76 ± 0.07) × 10²  M^-1  s^-1 and (4.06 ± 0.62) × 10 M^-1  s^-1 , respectively. The degradation rate of SMX was also affected by pipe material, and the rate followed the following order: stainless-steel pipe (SS) > ductile iron pipe (DI) > polyethylene pipe (PE). The degradation rate of SMX in the DI increased with increasing flow rate, but the increase was limited. In addition, SMX could increase the toxicity of water initially, yet the toxicity reduced to the level of tap water after 2-h chlorination. And the relative abundance of ARGs (sul1 and sul2) of tap water samples was significantly increased under different chlorination conditions. PRACTITIONER POINTS: The degradation rate of SMX in batch reactor and WDS is different, and they could be described by first- or second-order kinetics. The degradation of SMX had the fastest rate at neutral pH. The degradation rate of SMX was also affected by pipe material and flow velocity. SMX increased the toxicity of water initially, yet the toxicity reduced after a 2-h chlorination. SMX increased the relative abundance of antibiotic resistance genes sul1 and sul2.

Designing benign molecules: The influence of O-acetylated glucosamine-substituents on the environmental biodegradability of fluoroquinolones

Antibiotics are detected worldwide in the aquatic environment, with continuously rising concentrations. Antibiotics in the environment have the potential to damage ecosystems and contribute to the development of resistance. Whilst a few antibiotics, such as some β-lactams, are eliminated by effluent treatment, others, such as fluoroquinolones, are not or just partially removed and enter the environment. Therefore, approaches are needed to tackle those problems at the compound level. Benign by design (BbD), an important part of green pharmacy, has the goal to integrate environmental fate and end-of-use considerations at the very beginning, i.e., into the design of active pharmaceutical ingredients. Hence, pharmaceuticals should be designed to be sufficiently active and stable during storage and usage but should degrade after excretion into the environment, so that they cannot cause any adverse effects. Fluoroquinolones (FQs) are important broad-spectrum antibiotics. They are known to be persistent in the environment and to be neither inactivated nor degraded or even mineralized during sewage treatment. The addition of new substituents via amidation, like glucosamine moieties, at the carboxylic group of FQs, led to better antimicrobial activity compared to its parent compounds against various microorganisms. To investigate if the addition of sugar moieties could improve the overall environmental biodegradability of FQs, eight novel quinolone and fluoroquinolone analogs conjugated with 1,3,4,6-Tetra-O-acetyl-β-d-glucosamine and 2-deoxy-d-glucopyranose have been investigated regarding their ready biodegradability (OECD 301D/F) and their degradation pathways have been analyzed. According to the OECD 301D test, none of the substances could be classified as readily biodegradable. However, the O-acetyl analogs did undergo a partial degradation of the O-acetyl glucosamine moiety, via stepwise deacetylation and the degradation of the whole glucosamine moiety. The degradation resulted in Fluoroquinolone-3-carboxamide derivatives. Those insights could be further used as input for fragment-based design of benign APIs that will degrade once they reached the environment.

Confirming the presence of selected antibiotics and steroids in Norwegian biogas digestate

Farms utilizing sewage sludge and manure in their agronomic plant production are recognized as potential hotspots for environmental release of antibiotics and the resulting promotion of antibiotic resistance. As part of the circular economy, the use of biogas digestates for soil fertilizing is steadily increasing, but their potential contribution to the spreading of pharmaceutical residues is largely unknown. Digestates can be produced from a variety of biowaste resources, including sewage sludge, manure, food waste, and fish ensilage. We developed a method for the detection of 17 antibiotics and 2 steroid hormones and applied the method to detect pharmaceutical residues in digestates from most municipal biogas plants in Norway, covering a variety of feedstocks. The detection frequency and measured levels were overall low for most compounds, except a few incidents which cause concern. Specifically, relatively high levels of amoxicillin, penicillin G, ciprofloxacin, and prednisolone were detected in different digestates. Further, ipronidazole was detected in four digestates, although no commercial pharmaceutical products containing ipronidazole are currently registered in Norway. A simplified risk assessment showed a high risk for soil microorganisms and indicates the tendency for antibiotic-resistant bacteria for penicillin G and amoxicillin. For prednisolone and ipronidazole; however, no toxicity data is available for reliable risk assessments.

A Modified Sol-Gel Synthesis of Anatase {001}-TiO2/Au Hybrid Nanocomposites for Enhanced Photodegradation of Organic Contaminants

A sol-gel synthesis technique was employed for the preparation of anatase phase {001}-TiO2/Au hybrid nanocomposites (NCs). The scalable, schematic, and cost-efficient method was successfully modified using HF and NH4OH capping agents. The photocatalytic activity of the as-synthesized {001}-TiO2/Au NCs were tested over 2-cycle degradation of methylene blue (MB) dye and pharmaceutical active compounds (PhACs) of ibuprofen and naproxen under direct sunlight illumination at 35 °C and 44,000 lx. Transmission electron microscopy (TEM), high resolution transmission electron microscopy (HR-TEM), fast Fourier transform (FFT), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDS), and ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS) were employed for the characterization of the as-prepared sample. The characterization results from the TEM, XPS, and XRD studies established both the distribution of Au colloids on the surface of TiO2 material, and the presence of the highly crystalline structure of anatase {001}-TiO2/Au NCs. Photodegradation results from the visible light irradiation of MB indicate an enhanced photocatalytic performance of Au/TiO2 NCs over TiO2. The results from the photocatalytic activity test performed under direct sunlight exposure exhibited promising photodegradation efficiencies. In the first cycle, the sol-gel synthesized material exhibited relatively better efficiencies (91%) with the MB dye and ibuprofen, while the highest degradation efficiency for the second cycle was 79% for the MB dye. Pseudo first-order photodegradation rates from the first cycle were determined to be comparatively slower than those from the second degradation cycle.

Effects of antibiotics on anaerobic digestion of sewage sludge: Performance of anaerobic digestion and structure of the microbial community

As a common biological engineering technology, anaerobic digestion can stabilize sewage sludge and convert the carbon compounds into renewable energy (i.e., methane). However, anaerobic digestion of sewage sludge is severely affected by antibiotics. This review summarizes the effects of different antibiotics on anaerobic digestion of sewage sludge, including production of methane and volatile fatty acids (VFAs), and discusses the impact of antibiotics on biotransformation processes (solubilization, hydrolysis, acidification, acetogenesis and methanogenesis). Moreover, the effects of different antibiotics on microbial community structure (bacteria and archaea) were determined. Most of the research results showed that antibiotics at environmentally relevant concentrations can reduce biogas production mainly by inhibiting methanogenic processes, that is, methanogenic archaea activity, while a few antibiotics can improve biogas production. Moreover, the combination of multiple environmental concentrations of antibiotics inhibited the efficiency of methane production from sludge anaerobic digestion. In addition, some lab-scale pretreatment methods (e.g., ozone, ultrasonic combined ozone, zero-valent iron, Fe³⁺ and magnetite) can promote the performance of anaerobic digestion of sewage sludge inhibited by antibiotics.

Degradation of sulfamonomethoxine in solution using pulsed plasma discharge - identification of by-products and toxicity of treated solution to green algae

This study investigated the degradation of sulfamonomethoxine (SMM) by pulsed plasma discharge. SMM was successfully degraded following the first-order kinetics model. The percentage removal of SMM was estimated by the total input energy of plasma discharge, which was dependent on the initial SMM concentration. In addition, three types of by-products were observed at an early reaction time, which were then degraded. In contrast, the ecotoxicity of the treated solution by plasma discharge was assessed by an acute toxicity test using the green alga Raphidocelis subcapitata. The plasma discharge in water generated hydrogen peroxide with a concentration higher than the EC₅₀ for R. subcapitata. It is therefore necessary to remove H₂O₂ or prevent the generation of H₂O₂ for the degradation of antibiotics in solutions using plasma discharge.

Simultaneous elimination of antibiotics and antibiotics resistance genes in nitritation of source-separated urine

Antibiotics in human urine could accelerate dissemination of antibiotics resistance genes (ARGs), posing potential threat to sewage. The nitritation of source-separated urine was a critical step to realize the urine resourcelization and nitrogen stabilization. However, the synergic control on antibiotics and ARGs during urine nitritation was unrevealed. This study investigated the removal profiles of five typical antibiotics and the shifts of microbial community and ARGs during stable nitritation. The result showed that sulfamethoxazole and roxithromycin were effectively eliminated with high removal efficiency of (95 ± 5) % and (90 ± 10) %, followed by enrofloxacin with removal efficiency of (60 ± 5) %, whereas trimethoprim and chloramphenicol showed low removal efficiency of less than 40 %. Ammonia oxidation bacteria and heterotrophic bacteria equally contributed to elimination of sulfamethoxazole with a high biodegradation rate of 0.1534 L/gVSS·h, while sorption and biodegradation jointly promoted other antibiotics removal. The total relative abundance of top 25 bacteria genera was decreased by 10 %. The total relative abundance of top 30 ARGs was decreased by more than 20 %, which was corresponding to the variation of bacterial community. The findings in this research would get a deeper insight into the eliminating antibiotics and controlling ARGs dissemination during nitritation of source-separated urine.

How multi-walled carbon nanotubes in wastewater influence the fate of coexisting antibiotic resistant genes in the subsequent disinfection process

Wastewater treatment plants (WWTPs) are important hubs for the spread of antibiotic resistance genes (ARGs). Engineered nanoparticles, which was inevitably released to WWTPs, could change environmentally sensitive of antibiotic resistant bacteria (ARB). This would influence the fate of ARGs in subsequent disinfection process and consequent health risk. In this study, the ARGs fate of the effluent in conventional sodium hypochlorite (NaClO) disinfection process was investigated as multi-walled carbon nanotubes (MWCNTs) existed in sequencing batch reactor (SBR). The results showed the existence of MWCNTs in SBR could enhance the removal efficiency of intracellular 16S rRNA gene and intI1, extracellular intI1, sul2 and tetX in the effluent by NaClO. This is mainly due to the variation of bacterial physiological status, bacterial population structure and the activation of NaClO under the role of MWCNTs. MWCNTs in SBR could increase in membrane permeability of bacterial cells, which would be conducive to the penetration of chlorination to cytoplasm. MWCNTs in SBR also could change the bacterial population structure and induce the chlorine-sensitive bacteria; thus the potential hosts of ARGs in the effluent would be more easily inactivated by NaClO. Moreover, the residual MWCNTs in the effluent could activate NaClO to generate various free radical, which would enhance the oxidizing capacity of chlorination.

Fate characteristics, exposure risk, and control strategy of typical antibiotics in Chinese sewerage system: A review

In China, the sewerage system plays an essential role in antibiotic removal; however, the fate profiles of antibiotics in sewers are not well understood, and risk identification throughout the sewerage system is inadequate. Based on the extensive detection results for typical groups of antibiotics in the discharge sources, influent and effluent from wastewater treatment plants (WWTPs), and excess sludge, a comprehensive evaluation was conducted to reveal the elimination profiles of the antibiotics, identify the fate characteristics in both sewers and WWTPs, assess the exposure risk levels, and propose a control strategy. The total concentration (based on the median concentrations of the target antibiotics) in aqueous waters was estimated to decrease from 7383.4 ng/L at the discharge source to 886.6 ng/L in the WWTP effluent, among which 69.6% was reduced by sewers and 18.4% was reduced by WWTPs. Antibiotic reduction in sewers was a combined effect of dilution, physiochemical reactions, sorption, biodegradation, and retransformation, and the A2O-MBR + ozonation process in the WWTPs exhibited superior performance in diminishing antibiotics. Notably, accumulated antibiotics in the excess sludge posed a high risk to natural environments (with a risk quotient of approximately 13.0), and the potential risk during combined sewer overflows (CSOs) was undetermined. Thus, enhanced sludge treatment techniques, accurate risk prediction, and proper precautions at CSOs are required to mitigate potential risk. A novel scheme involving an accurate estimation of discharge loads, preliminary treatment of highly concentrated discharge sources, and synergic control in sewers was proposed to eliminate antibiotics at the front end of pipes.

The in vivo and vitro degradation of sulfonamides in wetland plants reducing phytotoxicity and environmental pollution

Aquatic plants can be used for in situ remediation of water-borne pharmaceutical compounds; however, such information and that of the potential risks of metabolites released into the environment are limited. This study determined the capacity of Canna indica and Acorus calamus used in the remediation of water-borne sulfonamides (SA). The tolerance, removal, accumulation, and biotransformation of various water-borne SAs were investigated in vivo by exposing plants to SA solutions (50 µg/L and 500 µg/L). After 28 days, C. indica removed more SAs (89.3-97.8%) than A. calamus (12.8-84.6%) and non-planted systems (8.0-69.3%). The SA removal results, except from the A. calamus system with 500 µg/L SA, fit the first-order kinetics model. The estimated half-lives of all SAs were 3-40 h and 2-60 h in the C. indica and A. calamus systems, respectively. In vivo biotransformation and rhizosphere degradation were the major phyto-removal mechanisms, constituting 24.9-81.1% and 0.0-37.1% of all SAs in the C. indica and A. calamus systems, respectively. SA acetyl metabolites were detected only in plant tissues supporting evidence for plant metabolic processes without risk into the environment. SA metabolism including oxidation, methylation, and conjugation via acetylation was potentially beneficial to accumulation and tolerate stress of antibiotic. Canna indica was more suitable for cleaning SA. Our findings better clarify the potential and low risks of phytoremediation in antibiotic-contaminated waters.

Simultaneous Extraction of Four Antibiotic Compounds from Soil and Water Matrices

The incidence of antibiotic resistance is on the rise and becoming a major health concern. Analyzing the presence of antibiotic compounds in the environment is critical for determining the potential health effects for humans, animals, and ecosystems. For this study, methods were developed to simultaneously isolate and quantify four antibiotics important in human medicine (sulfamethoxazole—SMX, trimethoprim—TMP, lincomycin—LIN, and ofloxacin—OFL) in water and soil matrices. For water analysis, different solid phase extraction (SPE) cartridges (Oasis HLB plus and Phenomenex Strata-X) were compared. The Oasis HLB Plus SPE cartridge provided the highest and most consistent recoveries with 118 ± 5%, 86 ± 4%, 83 ± 5%, and 75 ± 1% for SMX, TMP, LIN, and OFL, respectively. For soil analysis, different pre-treatments (grinding and freeze-drying) and soil extraction methodologies (liquid-solid extraction and accelerated solvent extraction (ASE)) were compared. The ASE system resulted in the highest overall recoveries of SMX, TMP, LIN, and OFL with an optimal extracting solution of acetonitrile/water (v/v, 50:50, pH 2.8). When the soil was ground and freeze-dried, trimethoprim recovery increased and when soil was ground, but not freeze-dried, LIN and OFL recoveries increased, while sulfamethoxazole recoveries decreased when soil was ground and freeze-dried. Based on this research, matrix characteristics, especially pH, as well as the pKa’s and functional groups of the antibiotics need to be carefully considered when attempting to extract antibiotic compounds from a water or soil environment.

Occurrence, Comparison and Priority Identification of Antibiotics in Surface Water and Sediment in Urbanized River: A Case Study of Suzhou Creek in Shanghai

Antibiotics in water have attracted increasing attention due to their potential threat to aquatic ecosystems and public health. Most previous studies have focused on heavily polluted environments, while ignoring urbanized rivers with high population density. Taking Suzhou Creek in Shanghai as an example, this study attempted to explore the antibiotic pollution characteristics of typical urbanized rivers. Further, it screened out priority antibiotics so as to provide reference for the regular monitoring of antibiotics in urban surface water in the study’s later stage. Four classes of 27 antibiotics in surface water samples and sediment samples were detected and analyzed by SPE-UPLC-MS/MS under both wet season and dry season. Results demonstrate that the total amount of antibiotics detected reached 1936.9 ng/L and 337.3 ng/g in water samples and sediment samples, respectively. Through Pearson correlation analysis, it can be shown that there is a very significant correlation between a variety of antibiotics in water and sediment. The results of ecological risk assessment based on risk quotient (RQ) show that certain antibiotics presented high and medium risk to the surrounding ecosystem. Finally, the priority antibiotics selected by optimized priority screening method were EM, SPD, CLR and RTM. Therefore, we have proven that the antibiotics being discharged in urbanized rivers show different types of antibiotics, while presenting a toxicological risk to certain species.

Occurrence of antibiotics and bacterial resistance genes in wastewater: resistance mechanisms and antimicrobial resistance control approaches

Antimicrobial pharmaceuticals are classified as emergent micropollutants of concern, implying that even at low concentrations, long-term exposure to the environment can have significant eco-toxicological effects. There is a lack of a standardized regulatory framework governing the permissible antibiotic content for monitoring environmental water quality standards. Therefore, indiscriminate discharge of antimicrobials at potentially active concentrations into urban wastewater treatment facilities is rampant. Antimicrobials may exert selective pressure on bacteria, leading to resistance development and eventual health consequences. The emergence of clinically important multiple antibiotic-resistant bacteria in untreated hospital effluents and wastewater treatment plants (WWTPs) has been linked to the continuous exposure of bacteria to antimicrobials. The levels of environmental exposure to antibiotics and their correlation to the evolution and spread of resistant bacteria need to be elucidated to help in the formulation of mitigation measures. This review explores frequently detected antimicrobials in wastewater and gives a comprehensive coverage of bacterial resistance mechanisms to different antibiotic classes through the expression of a wide variety of antibiotic resistance genes either inherent and/or exchanged among bacteria or acquired from the reservoir of antibiotic resistance genes (ARGs) in wastewater systems. To complement the removal of antibiotics and ARGs from WWTPs, upscaling the implementation of prospective interventions such as vaccines, phage therapy, and natural compounds as alternatives to widespread antibiotic use provides a multifaceted approach to minimize the spread of antimicrobial resistance.

A comparative risk ranking of antibiotic pollution from human and veterinary antibiotic usage - An Irish case study

Antibiotic use in the healthcare and agriculture sectors has resulted in levels being found in environmental compartments including surface waters. This can create a selective pressure toward antibiotic resistance development, representing a potential risk to human health. Examining the Irish scenario, this screening paper develops a novel risk ranking model to comparatively assess, on a national scale, the predicted amount of antibiotics entering water bodies as a result of their use in healthcare and agricultural sectors, and the subsequent risk of antibiotic resistance development. Probabilistic modelling approaches, based on data sourced from published literature on antibiotics, are used to account for inherent uncertainty and variability in the input factors; usage, metabolism, degradation and wastewater removal rates, estimating the mass of six antibiotic classes released daily from both sectors. These mass estimates are used to generate predicted concentrations and risk quotient values for each drug class, utilising estimated minimum inhibitory concentration values sourced from the literature. Modelled results predict higher risk quotient (RQ) values in the healthcare compared to agriculture sector, with macrolides and penicillins ranking highest in terms of RQ value. A lower RQ is also predicted from human-use tetracyclines, trimethoprim, and quinolones. Avenues for runoff reduction for each antibiotic class, in particular the higher-risk classes, in both usage sectors are discussed. For validation, predicted levels are compared to observed levels of antibiotic residues in Ireland. Key knowledge gaps to assist prediction and modelling of antibiotic pollution in future studies are also discussed. This research paper establishes a protocol and model structure, applicable to other regions, to compare the contributions of healthcare and agriculture to antibiotic pollution, and identifies highest-ranked antibiotic classes in terms of potential resistance development for prioritisation in the Irish situation.