Long-term operation of microbial electrosynthesis systems improves acetate production by autotrophic microbiomes

Integration of biocompatible hydrogen evolution catalyst developed from metal-mix solutions with microbial electrosynthesis

Microbial conversion of CO2 to multi-carbon compounds such as acetate and butyrate is a promising valorisation technique. For those reactions, the electrochemical supply of hydrogen to the biocatalyst is a viable approach. Earlier we have shown that trace metals from microbial growth media spontaneously form in situ electro-catalysts for hydrogen evolution. Here, we show biocompatibility with the successful integration of such metal mix-based HER catalyst for immediate start-up of microbial acetogenesis (CO2 to acetate). Also, n-butyrate formation started fast (after twenty days). Hydrogen was always produced in excess, although productivity decreased over the 36 to 50 days, possibly due to metal leaching from the cathode. The HER catalyst boosted microbial productivity in a two-step microbial community bioprocess: acetogenesis by a BRH-c20a strain and acetate elongation to n-butyrate by Clostridium sensu stricto 12 (related) species. These findings provide new routes to integrate electro-catalysts and micro-organisms showing respectively bio and electrochemical compatibility.

Methanol as a co-substrate with CO2 enhances butyrate production in microbial electrosynthesis

Methanol is a promising feedstock for the bio-based economy as it can be derived from organic waste streams or produced electrochemically from CO2. Acetate production from CO2 in microbial electrosynthesis (MES) has been widely studied, while more valuable compounds such as butyrate are currently attracting attention. In this study, methanol was used as a co-substrate with CO2 to enhance butyrate production in MES. Feeding with CO2 and methanol resulted in the highest butyrate production rates and titres of 0.36 ± 0.01 g L-1 d-1 and 8.6 ± 0.2 g L-1, respectively, outperforming reactors with only CO2 feeding (0.20 ± 0.03 g L-1 d-1 and 5.2 ± 0.1 g L-1, respectively). Methanol acted as electron donor and as carbon source, both of which contributed ca. 50% of the carbon in the products. Eubacterium was the dominant genus with 52.6 ± 2.5% relative abundance. Thus, we demonstrate attractive route for the use of the C1 substrates, CO2 and methanol, to produce mainly butyrate. KEY POINTS: • Butyrate was the main product from methanol and CO2 in MES • Methanol acted as both carbon and electron source in MES • Eubacterium dominating microbial culture was enriched in MES.

Advanced Electroanalysis for Electrosynthesis

Electrosynthesis is a popular, environmentally friendly substitute for conventional organic methods. It involves using charge transfer to stimulate chemical reactions through the application of a potential or current between two electrodes. In addition to electrode materials and the type of reactor employed, the strategies for controlling potential and current have an impact on the yields, product distribution, and reaction mechanism. In this Review, recent advances related to electroanalysis applied in electrosynthesis were discussed. The first part of this study acts as a guide that emphasizes the foundations of electrosynthesis. These essentials include instrumentation, electrode selection, cell design, and electrosynthesis methodologies. Then, advances in electroanalytical techniques applied in organic, enzymatic, and microbial electrosynthesis are illustrated with specific cases studied in recent literature. To conclude, a discussion of future possibilities that intend to advance the academic and industrial areas is presented.

Optimizing electrochemically active microorganisms as a key player in the bioelectrochemical system: Identification methods and pathways to large-scale implementation

The rapid global economic growth driven by industrialization and population expansion has resulted in significant issues, including reliance on fossil fuels, energy scarcity, water crises, and environmental emissions. To address these issues, bioelectrochemical systems (BES) have emerged as a dual-purpose solution, harnessing electrochemical processes and the capabilities of electrochemically active microorganisms (EAM) to simultaneously recover energy and treat wastewater. This review examines critical performance factors in BES, including inoculum selection, pretreatment methods, electrodes, and operational conditions. Further, authors explore innovative approaches to suppress methanogens and simultaneously enhance the EAM in mixed cultures. Additionally, advanced techniques for detecting EAM are discussed. The rapid detection of EAM facilitates the selection of suitable inoculum sources and optimization of enrichment strategies in BESs. This optimization is essential for facilitating the successful scaling up of BES applications, contributing substantially to the realization of clean energy and sustainable wastewater treatment. This analysis introduces a novel viewpoint by amalgamating contemporary research on the selective enrichment of EAM in mixed cultures. It encompasses identification and detection techniques, along with methodologies tailored for the selective enrichment of EAM, geared explicitly toward upscaling applications in BES.

The Effect of Bismuth and Tin on Methane and Acetate Production in a Microbial Electrosynthesis Cell Fed with Carbon Dioxide

This study investigates the impacts of bismuth and tin on the production of CH4 and volatile fatty acids in a microbial electrosynthesis cell with a continuous CO2 supply. First, the impact of several transition metal ions (Ni2+, Fe2+, Cu2+, Sn2+, Mn2+, MoO42-, and Bi3+) on hydrogenotrophic and acetoclastic methanogenic microbial activity was evaluated in a series of batch bottle tests incubated with anaerobic sludge and a pre-defined concentration of dissolved transition metals. While Cu is considered a promising catalyst for the electrocatalytic conversion of CO2 to short chain fatty acids such as acetate, its presence as a Cu2+ ion was demonstrated to significantly inhibit the microbial production of CH4 and acetate. At the same time, CH4 production increased in the presence of Bi3+ (0.1 g L-1) and remained unchanged at the same concentration of Sn2+. Since Sn is of interest due to its catalytic properties in the electrochemical CO2 conversion, Bi and Sn were added to the cathode compartment of a laboratory-scale microbial electrosynthesis cell (MESC) to achieve an initial concentration of 0.1 g L-1. While an initial increase in CH4 (and acetate for Sn2+) production was observed after the first injection of the metal ions, after the second injection, CH4 production declined. Acetate accumulation was indicative of the reduced activity of acetoclastic methanogens, likely due to the high partial pressure of H2. The modification of a carbon-felt electrode by the electrodeposition of Sn metal on its surface prior to cathode inoculation with anaerobic sludge showed a doubling of CH4 production in the MESC and a lower concentration of acetate, while the electrodeposition of Bi resulted in a decreased CH4 production.

Novel electrochemical strategies for the microbial conversion of CO2 into biomass and volatile fatty acids using a fluid-like bed electrode in a three-phase reactor

Microbial electrosynthesis (MES) constitutes a bioelectrochemical process where bacteria uptake electrons extracellularly from a polarized electrode to incorporate them into their anabolic metabolism. However, the efficiency of current MES reactor designs can be lower than expected due to limitations regarding electron transfer and mass transport. One of the most promising bioreactor configurations to overcome these bottlenecks is the Microbial Electrochemical Fluidized Bed Reactor (ME-FBR). In this study, microbial CO2 fixation is investigated for the first time in a ME-FBR operated as a 3-phase reactor (solid-liquid-gas). An electroconductive carbon bed, acting as a working electrode, was fluidized with gas and polarized at different potentials (-0.6, -0.8 and -1 V vs. Ag/AgCl) so it could act as an electron donor (biocathode). Under these potentials, CO2 fixation and electron transfer were evaluated. Autotrophic electroactive microorganisms from anaerobic wastewater were enriched in a ME-FBR in the presence of 2-bromoethanosulfonic acid (BES) to inhibit the growth of methanogens. Cyclic voltammetry analysis revealed interaction between the microorganisms and the cathode. Furthermore, volatile fatty acids like propionate, formate and acetate were detected in the culture supernatant. Acetate production had a maximum rate of ca. 1 g L-1  day-1 . Planktonic cell biomass was produced under continuous culture at values as high as ca. 0.7 g L-1 dry weight. Overall, this study demonstrates the feasibility of employing a fluidized electrode with gaseous substrates and electricity as the energy source for generating biomass and carboxylic acids.

Copper foam supported g-C3N4-metal-organic framework bacteria biohybrid cathode catalyst for CO2 reduction in microbial electrosynthesis

Microbial electrosynthesis (MES) presents a versatile approach for efficiently converting carbon dioxide (CO2) into valuable products. However, poor electron uptake by the microorganisms from the cathode severely limits the performance of MES. In this study, a graphitic carbon nitride (g-C3N4)-metal-organic framework (MOF) i.e. HKUST-1 composite was newly designed and synthesized as the cathode catalyst for MES operations. The physiochemical analysis such as X-ray diffraction, scanning electron microscopy (SEM), and X-ray fluorescence spectroscopy showed the successful synthesis of g-C3N4-HKUST-1, whereas electrochemical assessments revealed its enhanced kinetics for redox reactions. The g-C3N4-HKUST-1 composite displayed excellent biocompatibility to develop electroactive biohybrid catalyst for CO2 reduction. The MES with g-C3N4-HKUST-1 biohybrid demonstrated an excellent current uptake of 1.7 mA/cm2, which was noted higher as compared to the MES using g-C3N4 biohybrid (1.1 mA/cm2). Both the MESs could convert CO2 into acetic and isobutyric acid with a significantly higher yield of 0.46 g/L.d and 0.14 g/L.d respectively in MES with g-C3N4-HKUST-1 biohybrid and 0.27 g/L.d and 0.06 g/L.d, respectively in MES with g-C3N4 biohybrid. The findings of this study suggest that g-C3N4-HKUST-1 is a highly efficient catalytic material for biocathodes in MESs to significantly enhance the CO2 conversion.

Carbon dioxide reduction to high-value chemicals in microbial electrosynthesis system: Biological conversion and regulation strategies

Large emissions of atmospheric carbon dioxide (CO2) are causing climatic and environmental problems. It is crucial to capture and utilize the excess CO2 through diverse methods, among which the microbial electrosynthesis (MES) system has become an attractive and promising technology to mitigate greenhouse effects while reducing CO2 to high-value chemicals. However, the biological conversion and metabolic pathways through microbial catalysis have not been clearly elucidated. This review first introduces the main acetogenic bacteria for CO2 reduction and extracellular electron transfer mechanisms in MES. It then intensively analyzes the CO2 bioconversion pathways and carbon chain elongation processes in MES, together with energy supply and utilization. The factors affecting MES performance, including physical, chemical, and biological aspects, are summarized, and the strategies to promote and regulate bioconversion in MES are explored. Finally, challenges and perspectives concerning microbial electrochemical carbon sequestration are proposed, and suggestions for future research are also provided. This review provides theoretical foundation and technical support for further development and industrial application of MES for CO2 reduction.

Bioelectrocatalytic Synthesis: Concepts and Applications

Bioelectrocatalytic synthesis is the conversion of electrical energy into value-added products using biocatalysts. These methods merge the specificity and selectivity of biocatalysis and energy-related electrocatalysis to address challenges in the sustainable synthesis of pharmaceuticals, commodity chemicals, fuels, feedstocks and fertilizers. However, the specialized experimental setups and domain knowledge for bioelectrocatalysis pose a significant barrier to adoption. This review introduces key concepts of bioelectrosynthetic systems. We provide a tutorial on the methods of biocatalyst utilization, the setup of bioelectrosynthetic cells, and the analytical methods for assessing bioelectrocatalysts. Key applications of bioelectrosynthesis in ammonia production and small-molecule synthesis are outlined for both enzymatic and microbial systems. This review serves as a necessary introduction and resource for the non-specialist interested in bioelectrosynthetic research.

Microbial electrosynthesis with Clostridium ljungdahlii benefits from hydrogen electron mediation and permits a greater variety of products

Microbial electrosynthesis (MES) is a very promising technology addressing the challenge of carbon dioxide recycling into organic compounds, which might serve as building blocks for the (bio)chemical industry. However, poor process control and understanding of fundamental aspects such as the microbial extracellular electron transfer (EET) currently limit further developments. In the model acetogen Clostridium ljungdahlii, both direct and indirect electron consumption via hydrogen have been proposed. However, without clarification neither targeted development of the microbial catalyst nor process engineering of MES are possible. In this study, cathodic hydrogen is demonstrated to be the dominating electron source for C. ljungdahlii at electroautotrophic MES allowing for superior growth and biosynthesis, compared to previously reported MES using pure cultures. Hydrogen availability distinctly controlled an either planktonic- or biofilm-dominated lifestyle of C. ljungdahlii. The most robust operation yielded higher planktonic cell densities in a hydrogen mediated process, which demonstrated the uncoupling of growth and biofilm formation. This coincided with an increase of metabolic activity, acetate titers, and production rates (up to 6.06 g L^-1 at 0.11 g L^-1 d^-1). For the first time, MES using C. ljungdahlii was also revealed to deliver other products than acetate in significant amounts: here up to 0.39 g L^-1 glycine or 0.14 g L^-1 ethanolamine. Hence, a deeper comprehension of the electrophysiology of C. ljungdahlii was shown to be key for designing and improving bioprocess strategies in MES research.

Progress and perspectives on microbial electrosynthesis for valorisation of CO2 into value-added products

Microbial electrosynthesis (MES) is a neoteric technology that facilitates biocatalysed synthesis of organic compounds with the aid of homoacetogenic bacteria, while feeding CO₂ as an inorganic carbon source. Operating MES with surplus renewable electricity further enhances the sustainability of this innovative bioelectrochemical system (BES). However, several lacunae exist in the domain knowledge, stunting the widespread application of MES. Despite significant progress in this area over the past decade, the product yield efficiency is not on par with other contemporary technologies. This bottleneck can be overcome by adopting a holistic approach, i.e., applying innovative and integrated solutions to ensure a robust MES operation. Further, the widespread deployment of MES exclusively relies on its ability to mature a sessile biofilm over a biocompatible electrode, while offering minimal charge transfer resistance. Additionally, operating MES preferably at H₂-generating reduction potential and valorising industrial off-gas as carbon substrate is crucial to accomplish economic sustainability. In light of the aforementioned, this review collates the latest progress in the design and development of MES-centred systems for valorisation of CO₂ into value-added products. Specifically, it highlights the significance of inoculum pre-treatment for promoting biocatalytic activity and biofilm growth on the cathodic surface. In addition, it summarizes the diverse materials that are commonly used as electrodes in MES, with an emphasis on the importance of inexpensive, robust, and biocompatible electrode materials for the practical application of MES technology. Further, the review presents insights into media conditions, operational factors, and reactor configurations that affect the overall performance of MES process. Finally, the product range of MES, downstream processing requirements, and integration of MES with other environmental remediation technologies are also discussed.

Clostridium kluyveri enhances caproate production by synergistically cooperating with acetogens in mixed microbial community of electro-fermentation system

As a chain elongation (CE) model strain, Clostridium kluyveri has been used in the studies of bioaugmentation of caproate production. However, its application in the novel electro-fermentation CE system for bioaugmentation is still unclear. In this study, the CE performances, with or without bioaugmentation and in conventional or electro-fermentation systems were compared. And the mechanism of electrochemical-bioaugmentation by constructing a co-culture of Acetobacterium woodii and Clostridium kluyveri were further verified. Results demonstrated that the bioaugmentation treatments have better CE performance, especially in electro-fermentation system, with a highest caproate concentration of 4.68 g·L^-1. Mechanism analysis revealed that C. kluyveri responded to the electric field and emerged synergy with the acetogens, which was proved by the increases of C. kluyveri colonization and the acetogens abundance in biofilm and supported by the co-culture experiment. This study provides a novel insight of microbial synergy mechanism of C. kluyveri during CE bioaugmentation in electro-fermentation system.

Exploration of Bioinformatics on Microbial Fuel Cell Technology: Trends, Challenges, and Future Prospects

Microbial fuel cells (MFCs) are a cost-effective and environmentally friendly alternative energy method. MFC technology has gained much interest in recent decades owing to its effectiveness in remediating wastewater and generating bioelectricity. The microbial fuel cell generates energy mainlybecause of oxidation-reduction reactions. In this reaction, electrons were transferred between two reactants. Bioinformatics is expanding across a wide range of microbial fuel cell technology. Electroactive species in the microbial community were evaluated using bioinformatics methodologies in whole genome sequencing, RNA sequencing, transcriptomics, metagenomics, and phylogenetics. Technology advancements in microbial fuel cells primarily produce power from organic and inorganic waste from various sources. Reduced chemical oxygen demand and waste degradation are two added advantages for microbial fuel cells. From plants, bacteria, and algae, microbial fuel cells were developed. Due to the rapid advancement of sequencing techniques, bioinformatics approaches are currently widely used in the technology of microbial fuel cells. In addition, they play an important role in determining the composition of electroactive species in microorganisms. The metabolic pathway is also possible to determine with bioinformatics resources. A computational technique that reveals the nature of the mediators and the substrate was also used to predict the electrochemical properties. Computational strategies were used to tackle significant challenges in experimental procedures, such as optimization and understanding microbiological systems. The main focus of this review is on utilizing bioinformatics techniques to improve microbial fuel cell technology.

Enhancement of acetate production in hydrogen-mediated microbial electrosynthesis reactors by addition of silica nanoparticles

Microbial electrosynthesis (MES) is a promising technology for CO2 fixation and electrical energy storage. Currently, the low current density of MES limits its practical application. The H2-mediated and non-biofilm-driven MES could work under higher current density, but it is difficult to achieve high coulombic efficiency (CE) due to low H2 solubility and poor mass transfer. Here, we proposed to enhance the hydrogen mass transfer by adding silica nanoparticles to the reactor. At pH 7, 35 ℃ and 39 A·m- 2 current density, with the addition of 0.3wt% silica nanoparticles, the volumetric mass transfer coefficient (kLa) of H2 in the reactor increased by 32.4% (from 0.37 h- 1 to 0.49 h- 1), thereby increasing the acetate production rate and CE of the reactor by 69.8% and 69.2%, respectively. The titer of acetate in the reactor with silica nanoparticles (18.5 g·L- 1) was 56.9% higher than that of the reactor without silica nanoparticles (11.8 g·L- 1). Moreover, the average acetate production rate of the reactor with silica nanoparticles was up to 2.14 g·L- 1·d- 1 in the stable increment phase, which was much higher than the other reported reactors. These results demonstrated that the addition of silica nanoparticles is an effective approach to enhancing the performance of H2-mediated MES reactors.

Recent advances and challenges in the bioconversion of acetate to value-added chemicals

Acetate is a major byproduct of the bioconversion of the greenhouse gas carbon dioxide, pretreatment of lignocellulose biomass, and microbial fermentation. The utilization and valorization of acetate have been emphasized in transforming waste to clean energy and value-added platform chemicals, contributing to the development of a closed carbon loop toward a low-carbon circular bio-economy. Acetate has been used to produce several platform chemicals, including succinate, 3-hydroxypropionate, and itaconic acid, highlighting the potential of acetate to synthesize many biochemicals and biofuels. On the other hand, the yields and titers have not reached the theoretical maximum. Recently, recombinant strain development and pathway regulation have been suggested to overcome this limitation. This review provides insights into the important constraints limiting the yields and titers of the biochemical and metabolic pathways of bacteria capable of metabolizing acetate for acetate bioconversion. The current developments in recombinant strain engineering are also discussed.

Enhanced CO2 reduction and acetate synthesis in autotrophic biocathode by N-Hexanoyl-L-homoserine lactone (C6HSL)-based quorum-sensing regulation

The aim of this study was to investigate the ecological role of quorum-sensing signaling molecule on the autotrophic biocathode for CO₂ reduction and acetate synthesis. As a typical quorum-sensing signaling molecule, N-Hexanoyl-L-homoserine lactone (C6HSL) was used to regulate the construction of cathode biofilm. Results showed that the maximum acetate production from CO₂ reduction improved by 94.8%, and the maximum Faraday efficiency of the microbial electrosynthesis system enhanced by 71.7%, with the regulation of C6HSL. Electrochemical analyses indicated that higher electrochemical activity and lower charge resistance of biocathode were obtained with C6HSL than without C6HSL. Confocal laser scanning microscopy and electron inhibitor experiment suggested that exogenous C6HSL increased living biomass in the biofilm and facilitated the electron transfer pathway related to NADH dehydrogenase-CoQ and proton motive force. With the C6HSL regulation, the relative abundance of hydrogen producers (e.g., Desulfovibrio and Desulfomicrobium) increased, contributing to the improved performance of autotrophic biocathode.

The oxygen dilemma: The challenge of the anode reaction for microbial electrosynthesis from CO2

Microbial electrosynthesis (MES) from CO2 provides chemicals and fuels by driving the metabolism of microorganisms with electrons from cathodes in bioelectrochemical systems. These microorganisms are usually strictly anaerobic. At the same time, the anode reaction of bioelectrochemical systems is almost exclusively water splitting through the oxygen evolution reaction (OER). This creates a dilemma for MES development and engineering. Oxygen penetration to the cathode has to be excluded to avoid toxicity and efficiency losses while assuring low resistance. We show that this dilemma derives a strong need to identify novel reactor designs when using the OER as an anode reaction or to fully replace OER with alternative oxidation reactions.

Photosynthetic biohybrid coculture for tandem and tunable CO2 and N2 fixation

Solar-driven bioelectrosynthesis represents a promising approach for converting abundant resources into value-added chemicals with renewable energy. Microorganisms powered by electrochemical reducing equivalents assimilate CO2, H2O, and N2 building blocks. However, products from autotrophic whole-cell biocatalysts are limited. Furthermore, biocatalysts tasked with N2 reduction are constrained by simultaneous energy-intensive autotrophy. To overcome these challenges, we designed a biohybrid coculture for tandem and tunable CO2 and N2 fixation to value-added products, allowing the different species to distribute bioconversion steps and reduce the individual metabolic burden. This consortium involves acetogen Sporomusa ovata, which reduces CO2 to acetate, and diazotrophic Rhodopseudomonas palustris, which uses the acetate both to fuel N2 fixation and for the generation of a biopolyester. We demonstrate that the coculture platform provides a robust ecosystem for continuous CO2 and N2 fixation, and its outputs are directed by substrate gas composition. Moreover, we show the ability to support the coculture on a high-surface area silicon nanowire cathodic platform. The biohybrid coculture achieved peak faradaic efficiencies of 100, 19.1, and 6.3% for acetate, nitrogen in biomass, and ammonia, respectively, while maintaining product tunability. Finally, we established full solar to chemical conversion driven by a photovoltaic device, resulting in solar to chemical efficiencies of 1.78, 0.51, and 0.08% for acetate, nitrogenous biomass, and ammonia, correspondingly. Ultimately, our work demonstrates the ability to employ and electrochemically manipulate bacterial communities on demand to expand the suite of CO2 and N2 bioelectrosynthesis products.

Advances in cathode designs and reactor configurations of microbial electrosynthesis systems to facilitate gas electro-fermentation

In gas fermentation, a range of chemolithoautotrophs fix single-carbon (C1) gases (CO₂ and CO) when H₂ or other reductants are available. Microbial electrosynthesis (MES) enables CO₂ reduction by generating H₂ or reducing equivalents with the sole input of renewable electricity. A combined approach as gas electro-fermentation is attractive for the sustainable production of biofuels and biochemicals utilizing C1 gases. Various platform compounds such as acetate, butyrate, caproate, ethanol, butanol and bioplastics can be produced. However, technological challenges pertaining to the microbe-material interactions such as poor gas-liquid mass transfer, low biomass and biofilm coverage on cathode, low productivities still exist. We are presenting a review on latest developments in MES focusing on the configuration and design of cathodes that can address the challenges and support the gas electro-fermentation. Overall, the opportunities for advancing CO and CO₂-based biochemicals and biofuels production in MES with suitable cathode/reactor design are prospected.

CuO/g-C3N4 heterojunction photocathode enhances the microbial electrosynthesis of acetate through CO2 reduction

Microbial electrosynthesis (MES) is a novel CO₂ utilization technology. Biocatalysts in this process may use electrons obtained from a photovoltaic system to reduce CO₂ to chemicals and realize energy conversion from solar energy to chemical energy. The photoelectric material CuO/g-C₃N₄ was directly introduced into the MES system using mixed culture as biocatalyst in this study. CuO/g-C₃N₄ can effectively absorb light and presents satisfactory electron and hole separation ability. Photogenerated electrons from CuO/g-C₃N₄ enhanced the electron transfer rate and reduced cathodic charge transfer resistance. CuO/g-C₃N₄ mainly improved the electron supply of electroautotrophic microorganisms through direct electron transfer rather than indirect electron transfer via hydrogen. Photogenerated holes can combine electrons from anode and provide extra driving force to improve the MES performance. Furthermore, the CuO/g-C₃N₄ photocathode also improved the biocatalytic activity by increasing the total amount of biocatalyst and regulating cathodic microbial community composition. Acetate production rate in MES with the CuO/g-C₃N₄ photocathode was 2.6 times higher than that of the control group. This study provides a new strategy for semiconductor photocathodes to improve the MES performance with mixed culture.

Dual cathode configuration and headspace gas recirculation for enhancing microbial electrosynthesis using Sporomusa ovata

High-rate production of acetate and other value-added products from the reduction of CO₂ in microbial electrosynthesis (MES) using acetogens can be achieved with high reducing power where H₂ appears as a key electron mediator. H₂ evolution using metal cathodes can enhance the availability of H₂ to support high-rate microbial reduction of CO₂. Due to the low solubility of H₂, the availability of H₂ remains limited to the bacteria. In this study, we investigated the performances of Sporomusa ovata for CO₂ reduction when dual cathodes were used together in an MES, one was regular carbon cathode, and the other was a titanium mesh that allows higher hydrogen evolution. The dual cathode configuration was investigated in two sets of MES, one set had the usual S. ovata inoculated graphite rod, and another set had a synthetic biofilm-imprinted carbon cloth. Additionally, the headspace gas in MES was recirculated to increase the H₂ availability to the bacteria in suspension. High-rate CO₂ reduction was observed at -0.9 V vs Ag/AgCl with dual cathode configuration as compared to single cathodes. High titers of acetate (up to ∼11 g/L) with maximum instantaneous rates of 0.68-0.7 g/L/d at -0.9 V vs Ag/AgCl were observed, which are higher than the production rates reported in the literatures for S. ovata using MES with surface modified cathodes. A high H₂ availability supported the high-rate acetate production from CO₂ with diminished electricity input.

Application of bioelectrochemical systems to regulate and accelerate the anaerobic digestion processes

Anaerobic digestion (AD) serves as a potential bioconversion process to treat various organic wastes/wastewaters, including sewage sludge, and generate renewable green energy. Despite its efficiency, AD has several limitations that need to be overcome to achieve maximum energy recovery from organic materials while regulating inhibitory substances. Hence, bioelectrochemical systems (BESs) have been widely investigated to treat inhibitory compounds including ammonia in AD processes and improve the AD operational efficiency, stability, and economic viability with various integrations. The BES operations as a pretreatment process, inside AD or after the AD process aids in the upgradation of biogas (CO₂ to methane) and residual volatile fatty acids (VFAs) to valuable chemicals and fuels (alcohols) and even directly to electricity generation. This review presents a comprehensive summary of BES technologies and operations for overcoming the limitations of AD in lab-scale applications and suggests upscaling and future opportunities for BES-AD systems.

A short review of graphene in the microbial electrosynthesis of biochemicals from carbon dioxide

Microbial electrosynthesis (MES) is a potential energy transformation technology for the reduction of the greenhouse gas carbon oxide (CO2) into commercial chemicals.

Pediococcus pentosaceus Enhances Host Resistance Against Pathogen by Increasing IL-1β Production: Understanding Probiotic Effectiveness and Administration Duration

Probiotic administration is a potential strategy against enteric pathogen infection in either clinical treatment or animal nutrition industry, but the administration duration of probiotics varied and the underlying mechanisms remain unclear. A strain (YC) affiliated to Pediococcus pentosaceus, a commonly used probiotic, was isolated from fish gut and the potential role of YC against Aeromonas hydrophila was detected in zebrafish. We found that 3- or 4-week YC administration (YC3W or YC4W) increased the resistance against A. hydrophila while 1- or 2-week treatment (YC1W or YC2W) did not. To determine the possible reason, intestinal microbiota analysis and RNAseq were conducted. The results showed that compared with CON and YC1W, YC4W significantly increased the abundance of short-chain fatty acids (SCFAs) producing bacteria and elevated the gene expression of nlrp3. Higher butyrate content and enhanced expression of IL1β were subsequently found in YC4W. To identify the causal relationship between butyrate and the higher pathogen resistance, different concentrations of sodium butyrate (SB) were supplemented. The results suggested that 10 mmol/kg SB addition mirrored the protective effect of YC4W by increasing the production of IL-1β. Furthermore, the increased IL-1β raised the percentage of intestinal neutrophils, which endued the zebrafish with A. hydrophila resistance. In vivo knockdown of intestinal il1b eliminated the anti-infection effect. Collectively, our data suggested that the molecular mechanism of probiotics determined the administration duration, which is vital for the efficiency of probiotics. Promoting host inflammation by probiotic pretreatment is one potential way for probiotics to provide their protective effects against pathogens.

Valorisation of CO2 into Value-Added Products via Microbial Electrosynthesis (MES) and Electro-Fermentation Technology

Microbial electrocatalysis reckons on microbes as catalysts for reactions occurring at electrodes. Microbial fuel cells and microbial electrolysis cells are well-known in this context; both prefer the oxidation of organic and inorganic matter for producing electricity. Notably, the synthesis of high energy-density chemicals (fuels) or their precursors by microorganisms using bio-cathode to yield electrical energy is called Microbial Electrosynthesis (MES), giving an exceptionally appealing novel way for producing beneficial products from electricity and wastewater. This review accentuates the concept, importance and opportunities of MES, as an emerging discipline at the nexus of microbiology and electrochemistry. Production of organic compounds from MES is considered as an effective technique for the generation of various beneficial reduced end-products (like acetate and butyrate) as well as in reducing the load of CO2 from the atmosphere to mitigate the harmful effect of greenhouse gases in global warming. Although MES is still an emerging technology, this method is not thoroughly known. The authors have focused on MES, as it is the next transformative, viable alternative technology to decrease the repercussions of surplus carbon dioxide in the environment along with conserving energy.

Metagenomic and Metatranscriptomic Characterization of a Microbial Community That Catalyzes Both Energy-Generating and Energy-Storing Electrode Reactions

Electroactive bacteria are living catalysts, mediating energy-generating reactions at anodes or energy storage reactions at cathodes via extracellular electron transfer (EET). The Cathode-ANode (CANode) biofilm community was recently shown to facilitate both reactions; however, the identities of the primary constituents and underlying molecular mechanisms remain unknown. Here, we used metagenomics and metatranscriptomics to characterize the CANode biofilm. We show that a previously uncharacterized member of the family Desulfobulbaceae, Desulfobulbaceae-2, which had <1% relative abundance, had the highest relative gene expression and accounted for over 60% of all differentially expressed genes. At the anode potential, differential expression of genes for a conserved flavin oxidoreductase (Flx) and heterodisulfide reductase (Hdr) known to be involved in ethanol oxidation suggests a source of electrons for the energy-generating reaction. Genes for sulfate and carbon dioxide reduction pathways were expressed by Desulfobulbaceae-2 at both potentials and are the proposed energy storage reactions. Reduction reactions may be mediated by direct electron uptake from the electrode or from hydrogen generated at the cathode potential. The Desulfobulbaceae-2 genome is predicted to encode at least 85 multiheme (≥3 hemes) c-type cytochromes, some with as many as 26 heme-binding domains, that could facilitate reversible electron transfer with the electrode. Gene expression in other CANode biofilm species was also affected by the electrode potential, although to a lesser extent, and we cannot rule out their contribution to observed current. Results provide evidence of gene expression linked to energy storage and energy-generating reactions and will enable development of the CANode biofilm as a microbially driven rechargeable battery. IMPORTANCE Microbial electrochemical technologies (METs) rely on electroactive bacteria to catalyze energy-generating and energy storage reactions at electrodes. Known electroactive bacteria are not equally capable of both reactions, and METs are typically configured to be unidirectional. Here, we report on genomic and transcriptomic characterization of a recently described microbial electrode community called the Cathode-ANode (CANode). The CANode community is able to generate or store electrical current based on the electrode potential. During periods where energy is not needed, electrons generated from a renewable source, such as solar power, could be converted into energy storage compounds to later be reversibly oxidized by the same microbial catalyst. Thus, the CANode system can be thought of as a living "rechargeable battery." Results show that a single organism may be responsible for both reactions demonstrating a new paradigm for electroactive bacteria.

Mixed-culture biocathodes for acetate production from CO2 reduction in the microbial electrosynthesis: Impact of temperature

The temperature effect on bioelectrochemical reduction of CO₂ to acetate with a mixed-culture biocathode in the microbial electrosynthesis was explored. The results showed that maximum acetate amount of 525.84 ± 1.55 mg L^-1 and fastest acetate formation of 49.21 ± 0.49 mg L^-1 d^-1 were obtained under mesophilic conditions. Electron recovery efficiency for CO₂ reduction to acetate ranged from 14.50 ± 2.20% to 64.86 ± 2.20%, due to propionate, butyrate and H₂ generation. Mesophilic conditions were demonstrated to be more favorable for biofilm formation on the cathode, resulting in a stable and dense biofilm. At phylum level, the relative abundance of Bacteroidetes phylum in the biofilm remarkably increased under mesophilic conditions, compared with that at psychrophilic and thermophilic conditions. At genus level, the Clostridium, Treponema, Acidithiobacillus, Acetobacterium and Acetoanaerobium were found to be dominated genera in the biofilm under mesophilic conditions, while genera diversity decreased under psychrophilic and thermophilic conditions.

Tuning of Electrode Surface for Enhanced Bacterial Adhesion and Reactions: A Review on Recent Approaches

The study of bacterial adhesion and its consequences has great significance in different fields such as marine science, renewable energy sectors, soil and plant ecology, food industry, and the biomedical field. Generally, the adverse effects of microbial surface interactions have attained wide visibility. However, herein, we present distinct approaches to highlight the beneficial aspects of microbial surface interactions for various applications rather than deal with the conventional negative aspects or prevention strategies. The surface microbial reactions can be tuned for useful biochemical or bio-electrochemical applications, which are otherwise unattainable through conventional routes. In this context, the present review is a comprehensive approach to highlight the basic principles and signature parameters that are responsible for the useful microbial-electrode interactions. It also proposes various surface tuning strategies, which are useful for tuning the electrode characteristics particularly suitable for the enhanced bacterial adhesion and reactions. The tuning of surface characteristics of electrodes is discussed with a special reference to the Microbial Fuel Cell as an example.

Identification of enriched hyperthermophilic microbial communities from a deep-sea hydrothermal vent chimney under electrolithoautotrophic culture conditions

Deep-sea hydrothermal vents are extreme and complex ecosystems based on a trophic chain. We are still unsure of the identities of the first colonizers of these environments and their metabolism, but they are thought to be (hyper)thermophilic autotrophs. Here we investigate whether the electric potential observed across hydrothermal chimneys could serve as an energy source for these first colonizers. Experiments were performed in a two-chamber microbial electrochemical system inoculated with deep-sea hydrothermal chimney samples, with a cathode as sole electron donor, CO2 as sole carbon source, and nitrate, sulfate, or oxygen as electron acceptors. After a few days of culturing, all three experiments showed growth of electrotrophic biofilms consuming the electrons (directly or indirectly) and producing organic compounds including acetate, glycerol, and pyruvate. Within the biofilms, the only known autotroph species retrieved were members of Archaeoglobales. Various heterotrophic phyla also grew through trophic interactions, with Thermococcales growing in all three experiments as well as other bacterial groups specific to each electron acceptor. This electrotrophic metabolism as energy source driving initial microbial colonization of conductive hydrothermal chimneys is discussed.

A General Model for Biofilm-Driven Microbial Electrosynthesis of Carboxylates From CO2

Up to now, computational modeling of microbial electrosynthesis (MES) has been underexplored, but is necessary to achieve breakthrough understanding of the process-limiting steps. Here, a general framework for modeling microbial kinetics in a MES reactor is presented. A thermodynamic approach is used to link microbial metabolism to the electrochemical reduction of an intracellular mediator, allowing to predict cellular growth and current consumption. The model accounts for CO₂ reduction to acetate, and further elongation to n-butyrate and n-caproate. Simulation results were compared with experimental data obtained from different sources and proved the model is able to successfully describe microbial kinetics (growth, chain elongation, and product inhibition) and reactor performance (current density, organics titer). The capacity of the model to simulate different system configurations is also shown. Model results suggest CO₂ dissolved concentration might be limiting existing MES systems, and highlight the importance of the delivery method utilized to supply it. Simulation results also indicate that for biofilm-driven reactors, continuous mode significantly enhances microbial growth and might allow denser biofilms to be formed and higher current densities to be achieved.

A Win-Loss Interaction on Fe0 Between Methanogens and Acetogens From a Climate Lake

Diverse physiological groups congregate into environmental corrosive biofilms, yet the interspecies interactions between these corrosive physiological groups are seldom examined. We, therefore, explored Fe⁰-dependent cross-group interactions between acetogens and methanogens from lake sediments. On Fe⁰, acetogens were more corrosive and metabolically active when decoupled from methanogens, whereas methanogens were more metabolically active when coupled with acetogens. This suggests an opportunistic (win-loss) interaction on Fe⁰ between acetogens (loss) and methanogens (win). Clostridia and Methanobacterium were the major candidates doing acetogenesis and methanogenesis after four transfers (metagenome sequencing) and the only groups detected after 11 transfers (amplicon sequencing) on Fe⁰. Since abiotic H₂ failed to explain the high metabolic rates on Fe⁰, we examined whether cell exudates (spent media filtrate) promoted the H₂-evolving reaction on Fe⁰ above abiotic controls. Undeniably, spent media filtrate generated three- to four-fold more H₂ than abiotic controls, which could be partly explained by thermolabile enzymes and partly by non-thermolabile constituents released by cells. Next, we examined the metagenome for candidate enzymes/shuttles that could catalyze H₂ evolution from Fe⁰ and found candidate H₂-evolving hydrogenases and an almost complete pathway for flavin biosynthesis in Clostridium. Clostridial ferredoxin-dependent [FeFe]-hydrogenases may be catalyzing the H₂-evolving reaction on Fe⁰, explaining the significant H₂ evolved by spent media exposed to Fe⁰. It is typical of Clostridia to secrete enzymes and other small molecules for lytic purposes. Here, they may secrete such molecules to enhance their own electron uptake from extracellular electron donors but indirectly make their H₂-consuming neighbors-Methanobacterium-fare five times better in their presence. The particular enzymes and constituents promoting H₂ evolution from Fe⁰ remain to be determined. However, we postulate that in a static environment like corrosive crust biofilms in lake sediments, less corrosive methanogens like Methanobacterium could extend corrosion long after acetogenesis ceased, by exploiting the constituents secreted by acetogens.

Emerging trends in microbial fuel cell diversification-Critical analysis

Global need for transformation from fossil-based to bio-based economy is constantly emerging for the production of low-carbon/renewable energy/products. Microbial fuel cell (MFC) catalysed by bio-electrochemical process gained significant attention initially for its unique potential to generate energy. Diversification of MFC is an emerging trend in the context of prioritising/enhancing product output while exploring the mechanism specificity of individual processes. Bioelectrochemical treatment system (BET), microbial electrosynthesis system (MES), bioelectrochemical system (BES), electro-fermentation (EF), microbial desalination cell (MDC), microbial electrolysis cell (MEC) and electro-methanogenesis (EM) are the diversified MFC systems that are being researched actively. Owing to its broad diversification, MFC domain is increasing its potential credibility as a platform technology. Microbial catalyzed electrochemical reactions are the key which directly/indirectly are proportionally linked to electrometabolic activity of microorganisms towards final anticipated output. This review intends to holistically document the mechanisms, applications and current trends of MFC diversifications towards multi-faced applications.

Electrodeposited Hybrid Biocathode-Based CO2 Reduction via Microbial Electro-Catalysis to Biofuels

Microbial electrosynthesis is a new approach to converting C1 carbon (CO₂) to more complex carbon-based products. In the present study, CO₂, a potential greenhouse gas, was used as a sole carbon source and reduced to value-added chemicals (acetate, ethanol) with the help of bioelectrochemical reduction in microbial electrosynthesis systems (MES). The performance of MES was studied with varying electrode materials (carbon felt, stainless steel, and cobalt electrodeposited carbon felt). The MES performance was assessed in terms of acetic acid and ethanol production with the help of gas chromatography (GC). The electrochemical characterization of the system was analyzed with chronoamperometry and cyclic voltammetry. The study revealed that the MES operated with hybrid cobalt electrodeposited carbon felt electrode yielded the highest acetic acid (4.4 g/L) concentration followed by carbon felt/stainless steel (3.7 g/L), plain carbon felt (2.2 g/L), and stainless steel (1.87 g/L). The alcohol concentration was also observed to be highest for the hybrid electrode (carbon felt/stainless steel/cobalt oxide is 0.352 g/L) as compared to the bare electrodes (carbon felt is 0.22 g/L) tested, which was found to be in correspondence with the pH changes in the system. Electrochemical analysis revealed improved electrotrophy in the hybrid electrode, as confirmed by the increased redox current for the hybrid electrode as compared to plain electrodes. Cyclic voltammetry analysis also confirmed the role of the biocatalyst developed on the electrode in CO₂ sequestration.

Microbial electrosynthesis: is it sustainable for bioproduction of acetic acid?

Microbial electrosynthesis (MES) is an innovative technology for electricity driven microbial reduction of carbon dioxide (CO2) to useful multi-carbon compounds. This study assesses the cradle-to-gate environmental burdens associated with acetic acid (AA) production via MES using graphene functionalized carbon felt cathode. The analysis shows that, though the environmental impact for the production of the functionalized cathode is substantially higher when compared to carbon felt with no modification, the improved productivity of the process helps in reducing the overall impact. It is also shown that, while energy used for extraction of AA is the key environmental hotspot, ion-exchange membrane and reactor medium (catholyte & anolyte) are other important contributors. A sensitivity analysis, describing four different scenarios, considering either continuous or fed-batch operation, is also described. Results show that even if MES productivity can be theoretically increased to match the highest space time yield reported for acetogenic bacteria in a continuous gas fermenter (148 g L-1 d-1), the environmental impact of AA produced using MES systems would still be significantly higher than that produced using a fossil-based process. Use of fed-batch operation and renewable (solar) energy sources do help in reducing the impact, however, the low production rates and overall high energy requirement makes large-scale implementation of such systems impractical. The analysis suggests a minimum threshold production rate of 4100 g m-2 d-1, that needs to be achieved, before MES could be seen as a sustainable alternative to fossil-based AA production.

Resistance assessment of microbial electrosynthesis for biochemical production to changes in delivery methods and CO2 flow rates

Microbial electrosynthesis (MES) for CO₂ valorization could be influenced by fluctuations in CO₂ mass transfer and flow rates. In this study, we developed an efficient method for CO₂ delivery to cathodic biofilm by directly sparging CO₂ through the pores of ceramic hollow fiber wrapped with Ni-foam/carbon nanotube electrode, and obtained 45% and 77% higher acetate and methane production, respectively. This was followed by the MES stability test in response to fluctuations in CO₂ flow rates varying from 0.3 ml/min to 10 ml/min. The biochemical production exhibited an increasing trend with CO₂ flow rates, achieving higher acetate (47.0 ± 18.4 mmol/m²/day) and methane (240.0 ± 32.2 mmol/m²/day) generation at 10 ml/min with over 90% coulombic efficiency. The biofilm and suspended biomass, however, showed high resistance to CO₂ flow fluctuations with Methanobacterium and Acetobacterium accounting for 80% of the total microbial community, which suggests the robustness of MES for onsite carbon conversion.

A mesoporous silica-supported CeO2/cellulose cathode catalyst for efficient bioelectrochemical reduction of inorganic carbon to biofuels

Single chamber MES reactor – microbial reduction synthesis of CO2 to VFA.

Microbial electrosynthesis: Towards sustainable biorefineries for production of green chemicals from CO2 emissions

Decarbonisation of the economy has become a priority at the global level, and the resulting legislative pressure is pushing the chemical and energy industries away from fossil fuels. Microbial electrosynthesis (MES) has emerged as a promising technology to promote this transition, which will further benefit from the decreasing cost of renewable energy. However, several technological challenges need to be addressed before the MES technology can reach its maturity. The aim of this review is to critically discuss the bottlenecks hampering the industrial adoption of MES, considering the whole production process (from the CO₂ source to the marketable products), and indicate future directions. A flexible stack design, with flat or tubular MES modules and direct CO₂ supply, is required for site-specific decentralised applications. The experience gained for scaling-up electrochemical cells (e.g. electrolysers) can serve as a guideline for realising pilot MES stacks to be technologically and economically evaluated in industrially relevant conditions. Maximising CO₂ abatement rate by targeting high-rate production of acetate can promote adoption of MES technology in the short term. However, the development of a replicable and robust strategy for production and in-line extraction of higher-value products (e.g. caproic acid and hexanol) at the cathode, and meaningful exploitation of the currently overlooked anodic reactions, can further boost MES cost-effectiveness. Furthermore, the use of energy storage and smart electronics can alleviate the fluctuations of renewable energy supply. Despite the unresolved challenges, the flexible MES technology can be applied to decarbonise flue gas from different sources, to upgrade industrial and wastewater treatment plants, and to produce a wide array of green and sustainable chemicals. The combination of these benefits can support the industrial adoption of MES over competing technologies.

A slurry electrode integrated with membrane electrolysis for high-performance acetate production in microbial electrosynthesis

Microbial electrosynthesis (MES) technology employs electrotrophic microbes as biocatalysts to produce chemicals from CO₂. The application of a slurry electrode can enlarge the surface area to volume ratio, and membrane electrolysis (ME) for on-line extraction can solve the problem of product inhibition. This study constructed a novel dual-chamber ME-MES integrated system equipped with a slurry electrode, and the effect of concentration of powder-activated carbon (AC) in the catholyte on chemical production was also evaluated. The integrated system amended with 5 g L^-1 AC produced up to 13.4 g L^-1 acetate, showing a 179% increase compared with the control group without AC (4.8 g L^-1). However, further increasing the AC concentration to 10 and 20 g L^-1 resulted in decreased acetate production. A high concentration of AC showed higher antimicrobial activity to methanogens, as compared to acetogens. Amending AC exacerbated the process of electroosmosis. Also, amending AC with 0 to 10 g L^-1 decreased the electrochemical losses via both the membrane and electrolyte. The chemical production using H₂ or the electrode as electron donors showed a similar trend when amending AC. The present study provided important information for guiding future research to construct an efficient configuration of an MES bioreactor.

Parameters influencing the development of highly conductive and efficient biofilm during microbial electrosynthesis: the importance of applied potential and inorganic carbon source

Cathode-driven applications of bio-electrochemical systems (BESs) have the potential to transform CO₂ into value-added chemicals using microorganisms. However, their commercialisation is limited as biocathodes in BESs are characterised by slow start-up and low efficiency. Understanding biosynthesis pathways, electron transfer mechanisms and the effect of operational variables on microbial electrosynthesis (MES) is of fundamental importance to advance these applications of a system that has the capacity to convert CO₂ to organics and is potentially sustainable. In this work, we demonstrate that cathodic potential and inorganic carbon source are keys for the development of a dense and conductive biofilm that ensures high efficiency in the overall system. Applying the cathodic potential of −1.0 V vs. Ag/AgCl and providing only gaseous CO₂ in our system, a dense biofilm dominated by Acetobacterium (ca. 50% of biofilm) was formed. The superior biofilm density was significantly correlated with a higher production yield of organic chemicals, particularly acetate. Together, a significant decrease in the H₂ evolution overpotential (by 200 mV) and abundant nifH genes within the biofilm were observed. This can only be mechanistically explained if intracellular hydrogen production with direct electron uptake from the cathode via nitrogenase within bacterial cells is occurring in addition to the commonly observed extracellular H₂ production. Indeed, the enzymatic activity within the biofilm accelerated the electron transfer. This was evidenced by an increase in the coulombic efficiency (ca. 69%) and a 10-fold decrease in the charge transfer resistance. This is the first report of such a significant decrease in the charge resistance via the development of a highly conductive biofilm during MES. The results highlight the fundamental importance of maintaining a highly active autotrophic Acetobacterium population through feeding CO₂ in gaseous form, which its dominance in the biocathode leads to a higher efficiency of the system.

From Acetate to Bio-Based Products: Underexploited Potential for Industrial Biotechnology

Currently, most biotechnological products are based on microbial conversion of carbohydrate substrates that are predominantly generated from sugar- or starch-containing plants. However, direct competitive uses of these feedstocks in the food and feed industry represent a dilemma, so using alternative carbon sources has become increasingly important in industrial biotechnology. A promising alternative carbon source that may be generated in substantial amounts from lignocellulosic biomass and C1 gases is acetate. This review discusses the underexploited potential of acetate to become a next-generation platform substrate in future industrial biotechnology and summarizes alternative sources and routes for acetate production. Furthermore, biotechnological aspects of microbial acetate utilization and the state of the art of biotechnological acetate conversion into value-added bioproducts are highlighted.