Solid-State NMR and NQR Spectroscopy of Lead-Halide Perovskite Materials

Strain-induced rubidium incorporation into wide-bandgap perovskites reduces photovoltage loss

A-site cation mixing can enhance the photovoltaic performance of a wide-bandgap (WBG) perovskite, but rubidium (Rb) cation mixing generally forms a nonperovskite phase. We report that lattice strain locks Rb ions into the α-phase of the lattice of a triple-halide WBG perovskite, preventing phase segregation into a nonperovskite Rb-cesium-rich phase. This process cooperates with chloride accommodation and promotes halide homogenization across the entire film volume. The resulting 1.67-electron volt WBG perovskite exhibits photoluminescence quantum yields exceeding 14% under 1-sun-equivalent irradiation, corresponding to a quasi-Fermi level splitting of ~1.34 electron volts. A WBG perovskite solar cell with an open-circuit voltage (VOC) of 1.30 volts was prepared, corresponding to 93.5% of the radiative VOC limit and representing the lowest photovoltage loss relative to the theoretical limit observed in WBG perovskites.

Halogen Bond Strength in Solids Quantified via Zeeman-Perturbed Nuclear Quadrupole Resonance Spectroscopy

Proton NMR is a ubiquitous and valuable probe of hydrogen bonds. Conversely, 127I NMR of strong halogen bond (XB) donors is hopeless due to quadrupolar coupling constants (CQ) on the order of GHz. We report here an innovative implementation of Zeeman-perturbed nuclear quadrupole resonance (Zp-NQR) spectroscopy, employing adjustable magnetic fields on the order of mT, which renders possible the acquisition and analysis of spectra of 127I and 79Br nuclei subject to quadrupolar couplings of up to 2.3 GHz in solid powders. This approach is demonstrated on three series of halogen-bonded cocrystals based on so-called "iconic" strong XB donors p-diiodotetrafluorobenzene, sym-trifluorotriiodobenzene, and p-dibromotetrafluorobenzene (27 compounds). Analysis of the spectra using a diagonalization of the Zeeman-quadrupolar Hamiltonian provides CQ values and quadrupolar asymmetry parameters, thereby overcoming various limitations encountered in pure NMR and pure NQR. Inspection of the data reveals strong correlations with geometrical and structural features of the halogen bond, including its length. Dispersion-corrected zeroth-order regular approximation relativistic DFT computations of the interaction energies of the XB donor are strongly correlated with experimental and computed values of CQ(127I) and CQ(79Br). It is concluded that the electric field gradient at the XB donor site is a useful metric for quantifying XB strength in solids. The XB interaction energies range from ∼5 to 10 kcal mol-1 for the systems studied herein. The Zp-NQR approach is amenable to widespread application to diverse problems in the chemical and materials sciences related to energy materials, crystal engineering, and many systems comprising strongly quadrupolar isotopes.

Highly Emissive Colloidal Nanocrystals of a "2.5-Dimensional" Monomethylhydrazinium Lead Bromide

The ability to control materials at the nanoscale has advanced optoelectronic devices, such as LEDs, displays, and quantum light sources. A new frontier is controlling exciton properties beyond quantum size confinement, achieved through single monolayer heterostructures. In the prototypical example of transition metal dichalcogenide heterostructures and moiré superlattices, excitons with long lifetimes, strong binding energies, and tunable dipole moments have been demonstrated and are ideal for optoelectronics and quantum applications. Expanding this material platform is crucial for further progress. This study introduces colloidal nanocrystals (NCs) of monomethylhydrazinium lead bromide (MMHPbBr3), a novel lead halide perovskite (LHP) with a unique "2.5-dimensional" electronic structure. While the spatial dimensionality of the NC extends in all three dimensions, these NCs exhibit excitonic properties intermediate between 2D and 3D LHPs. Density functional theory (DFT) calculations show that MMHPbBr3 features spatially separated electron and hole wave functions, with electrons delocalized in 3D and holes confined in 2D monolayers. Synthesized via a rapid colloidal method, these NCs were characterized by using techniques such as 4D-STEM and nuclear magnetic resonance, confirming their monoclinic structure. Optical analysis revealed size-dependent properties and 3D quantum confinement effects, with three distinct photoluminescence (PL) bands at cryogenic temperatures corresponding to excitons with varying interlayer coupling. PL spectroscopy of single MMHPbBr3 NCs reveals their photon emission statistics, expanding their potential for unconventional quantum material designs.

Formamidinium Incorporates into Rb-based Non-Perovskite Phases in Solar Cell Formulations

Organic-inorganic hybrid perovskite materials, such as formamidinium lead iodide (FAPbI3), are among the most promising emerging photovoltaic materials. However, the spontaneous phase transition from the photoactive perovskite phase to an inactive non-perovskite phase complicates the application of FAPbI3 in solar cells. To remedy this, alkali metal cations, most often Cs+, Rb+ or K+, are included during perovskite synthesis to stabilize the photoactive phase. The atomic-level mechanisms of stabilization are complex. While Cs+ dopes directly into the perovskite lattice, Rb+ does not, but instead forms an additional non-perovskite phase, and the mechanism by which Rb confers increased stability remains unclear. Here, we use 1H-87Rb double resonance NMR experiments to show that FA+ incorporates into the Rb-based non-perovskite phases (FAyRb1-yPb2Br5 and δ-FAyRb1-yPbI3) for both bromide and iodide perovskite formulations. This is demonstrated by changes in the 1H and 87Rb chemical shifts, 1H-87Rb heteronuclear correlation spectra, and 87Rb{1H} REDOR spectra. Simulation of the REDOR dephasing curves suggests up to ~60 % FA+ incorporation into the inorganic Rb-based phase for the bromide system. In light of these results, we hypothesize that the substitution of FA+ into the non-perovskite phase may contribute to the greater stability conferred by Rb salts in the synthesis of FA-based perovskites.

Nuclear Quadrupolar Resonance Structural Characterization of Halide Perovskites and Perovskitoids: A Roadmap from Electronic Structure Calculations for Lead-Iodide-Based Compounds

Metal halide perovskites, including some of their related perovskitoid structures, form a semiconductor class of their own, which is arousing ever-growing interest from the scientific community. With halides being involved in the various structural arrangements, namely, pure corner-sharing MX6 (M is metal and X is halide) octahedra, for perovskite networks, or alternatively a combination of corner-, edge-, and/or face-sharing for related perovskitoids, they represent the ideal probe for characterizing the way octahedra are linked together. Well known for their inherently large quadrupolar constants, which is detrimental to the resolution of nuclear magnetic resonance spectroscopy, most abundant halide isotopes (35/37Cl, 79/81Br, 127I) are in turn attractive for magnetic field-free nuclear quadrupolar resonance (NQR) spectroscopy. Here, we investigate the possibility of exploiting NQR spectroscopy of halides to distinctively characterize the various metal halide structural arrangements, using density functional theory simulations. Our calculations nicely match the available experimental results. Furthermore, they demonstrate that compounds with different connectivities of their MX6 building blocks, including lower dimensionalities such as 2D networks, show distinct NQR signals in a broad spectral window. They finally provide a roadmap of the characteristic NQR frequency ranges for each octahedral connectivity, which may be a useful guide to experimentalists, considering the long acquisition procedures typical of NQR. We hope this work will encourage the incorporation of NQR spectroscopy to further our knowledge of the structural diversity of metal halides.

Unraveling the Facet-Dependent Surface Chemistry at Molecular Scale: Photoassisted Oxidation of InP Nanocrystals

The facet-dependent surface chemistry of nanocrystals (NCs) provides fundamental insights into chemical reactivities, which are critical for obtaining precise control over the NC surface. In this study, by obtaining InP NCs with well-defined {111} and {110}/{-1-1-1} facets (tetrahedrons and tetrapods, respectively) capped with chloride-oleylamine ligands, the previously underinvestigated facet-dependent surface chemistry of III-V materials is explored. Solid-state and solution NMR analyses show that InP tetrahedrons, with their smaller surface heterogeneity (single facet composition and lesser edge/vertex contribution) and stronger Lewis acidity, exhibit narrow 31P and 115In resonances as well as deshielded 13C signals of α-carbon adjacent to the NH2 group of oleylamine. As a result, InP tetrahedra exhibit strong ligand binding and a notable presence of less-mobile oleylamine ligands on the surface, leading to the blocking of access to external species. This is also consistent with the minimal blue shift of the first excitonic peak in absorption spectra and the strong resistance to photoassisted surface oxidation of InP tetrahedrons. Our findings, supported by solid-state/solution NMR, FT-IR, and XPS analyses, highlight the significance of facet-dependent reactivities to surface ligands and, thus, atmospheric moieties, enhancing the potential of III-V NCs in various optoelectronic applications.

Quantum-Confined Perovskite Nanocrystals Enabled by Negative Catalyst Strategy for Efficient Light-Emitting Diodes

The perovskite nanocrystals (PeNCs) are emerging as a promising emitter for light-emitting diodes (LEDs) due to their excellent optical and electrical properties. However, the ultrafast growth of PeNCs often results in large sizes exceeding the Bohr diameter, leading to low exciton binding energy and susceptibility to nonradiative recombination, while small-sized PeNCs exhibit a large specific surface area, contributing to an increased defect density. Herein, Zn2+ ions as a negative catalyst to realize quantum-confined FAPbBr3 PeNCs with high photoluminescence quantum yields (PL QY) over 90%. Zn2+ ions exhibit robust coordination with Br- ions is introduced, effectively retarding the participation of Br- ions in the perovskite crystallization process and thus facilitating PeNCs size control. Notably, Zn2+ ions neither incorporate into the perovskite lattice nor are absorbed on the surface of PeNCs. And the reduced growth rate also promotes sufficient octahedral coordination of PeNC that reduces defect density. The LEDs based on these optimized PeNCs exhibits an external quantum efficiency (EQE) of 21.7%, significantly surpassing that of the pristine PeNCs (15.2%). Furthermore, the device lifetime is also extended by twofold. This research presents a novel approach to achieving high-performance optoelectronic devices.

Light-Induced Metallic and Paramagnetic Defects in Halide Perovskites from Magnetic Resonance

Halide perovskites are promising next-generation solar cell materials, but their commercialization is hampered by their propensity to degrade under operating conditions, particularly under heat, humidity, and light. Identifying degradation products and linking them to the degradation mechanism at the atomic scale is necessary to design more stable perovskite materials. Here we use magnetic resonance methods to identify and characterize the formation of both metallic lead clusters and Pb3+ defects upon light-induced degradation of methylammonium lead halide perovskite using nuclear magnetic resonance (NMR) and electron paramagnetic resonance (EPR) measurements. Paramagnetic relaxation enhancement (PRE) of the 1H NMR resonances demonstrates the presence of localized paramagnetic Pb3+ defects, a large Knight shift of the 207Pb NMR proves the presence of lead metal, and their relative proportions are determined by the differing temperature dependence in variable-temperature EPR. This work reconciles previous conflicting literature results, enabling the use of EPR spectroscopy to monitor photodegradation of perovskite devices.

3D Lead-Organoselenide-Halide Perovskites and their Mixed-Chalcogenide and Mixed-Halide Alloys

We incorporate Se into the 3D halide perovskite framework using the zwitterionic ligand: SeCYS (+NH3(CH2)2Se-), which occupies both the X- and A+ sites in the prototypical ABX3 perovskite. The new organoselenide-halide perovskites: (SeCYS)PbX2 (X=Cl, Br) expand upon the recently discovered organosulfide-halide perovskites. Single-crystal X-ray diffraction and pair distribution function analysis reveal the average structures of the organoselenide-halide perovskites, whereas the local lead coordination environments and their distributions were probed through solid-state 77Se and 207Pb NMR, complemented by theoretical simulations. Density functional theory calculations illustrate that the band structures of (SeCYS)PbX2 largely resemble those of their S analogs, with similar band dispersion patterns, yet with a considerable band gap decrease. Optical absorbance measurements indeed show band gaps of 2.07 and 1.86 eV for (SeCYS)PbX2 with X=Cl and Br, respectively. We further demonstrate routes to alloying the halides (Cl, Br) and chalcogenides (S, Se) continuously tuning the band gap from 1.86 to 2.31 eV-straddling the ideal range for tandem solar cells or visible-light photocatalysis. The comprehensive description of the average and local structures, and how they can fine-tune the band gap and potential trap states, respectively, establishes the foundation for understanding this new perovskite family, which combines solid-state and organo-main-group chemistry.

Local Structure in Crystalline, Glass and Melt States of a Hybrid Metal Halide Perovskite

The pursuit of structure-property relationships in crystalline metal halide perovskites (MHPs) has yielded an unprecedented combination of advantageous characteristics for wide-ranging optoelectronic applications. While crystalline MHP structures are readily accessible through diffraction-based structure refinements, providing a clear view of associated long-range ordering, the local structures in more recently discovered glassy MHP states remain unexplored. Herein, we utilize a combination of Raman spectroscopy, solid-state nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy, in situ X-ray diffraction (XRD) and pair distribution function (PDF) analysis to investigate the coordination environment in crystalline, glass and melt states of the 2D MHP [(S)-(-)-1-(1-naphthyl)ethylammonium]2PbBr4. While crystalline SNPB shows polarization-dependent Raman spectra, the glassy and melt states exhibit broad features and lack polarization dependence. Solid-state NMR reveals disordering at the organic-inorganic interface of the glass due to significant spatial disruption in the tethering ammonium groups and the corresponding dihedral bond angles connecting the naphthyl and ammonium groups, while still preserving substantial naphthyl group registry and remnants of the layering from the crystalline state (deduced from XRD analysis). Moreover, PDF analysis demonstrates the persistence of corner-sharing PbBr6 octahedra in the inorganic framework of the melt/glass phases, but with a loss of structural coherence over length scales exceeding approximately one octahedron due to disorder in the inter- and intraoctahedra bond angles/lengths. These findings deepen our understanding of diverse MHP structural motifs and how structural alterations within the MHP glass affect properties, offering potential for advancing next-generation phase change materials and devices.

Stabilization of highly efficient perovskite solar cells with a tailored supramolecular interface

The presence of defects at the interface between the perovskite film and the carrier transport layer poses significant challenges to the performance and stability of perovskite solar cells (PSCs). Addressing this issue, we introduce a dual host-guest (DHG) complexation strategy to modulate both the bulk and interfacial properties of FAPbI3-rich PSCs. Through NMR spectroscopy, a synergistic effect of the dual treatment is observed. Additionally, electro-optical characterizations demonstrate that the DHG strategy not only passivates defects but also enhances carrier extraction and transport. Remarkably, employing the DHG strategy yields PSCs with power conversion efficiencies (PCE) of 25.89% (certified at 25.53%). Furthermore, these DHG-modified PSCs exhibit enhanced operational stability, retaining over 96.6% of their initial PCE of 25.55% after 1050 hours of continuous operation under one-sun illumination, which was the highest initial value in the recently reported articles. This work establishes a promising pathway for stabilizing high-efficiency perovskite photovoltaics through supramolecular engineering, marking a significant advancement in the field.

Surface Structure of Lecithin-Capped Cesium Lead Halide Perovskite Nanocrystals Using Solid-State and Dynamic Nuclear Polarization NMR Spectroscopy

Inorganic colloidal cesium lead halide perovskite nanocrystals (NCs) encapsulated by surface capping ligands exhibit tremendous potential in optoelectronic applications, with their surface structure playing a pivotal role in enhancing their photophysical properties. Soy lecithin, a tightly binding zwitterionic surface-capping ligand, has recently facilitated the high-yield synthesis of stable ultraconcentrated and ultradilute colloids of CsPbX3 NCs, unlocking a myriad of potential device applications. However, the atomic-level understanding of the ligand-terminated surface structure remains uncertain. Herein, we use a versatile solid-state nuclear magnetic resonance (NMR) spectroscopic approach, in combination with dynamic nuclear polarization (DNP) and atomistic molecular dynamics (MD) simulations, to explore the effect of lecithin on the core-to-surface structures of CsPbX3 (X = Cl or Br) perovskites, sized from micron to nanoscale. Surface-selective (cross-polarization, CP) solid-state and DNP NMR (133Cs and 207Pb) methods were used to differentiate the unique surface and core chemical environments, while the head-groups {trimethylammonium [-N(CH3)3+] and phosphate (-PO4-)} of lecithin were assigned via 1H, 13C, and 31P NMR spectroscopy. A direct approach to determining the surface structure by capitalizing on the unique heteronuclear dipolar couplings between the lecithin ligand (1H and 31P) and the surface of the CsPbCl3 NCs (133Cs and 207Pb) is demonstrated. The 1H-133Cs heteronuclear correlation (HETCOR) DNP NMR indicates an abundance of Cs on the NC surface and an intimate proximity of the -N(CH3)3+ groups to the surface and subsurface 133Cs atoms, supported by 1H{133Cs} rotational-echo double-resonance (REDOR) NMR spectroscopy. Moreover, the 1H-31P{207Pb} CP REDOR dephasing curve provides average internuclear distance information that allows assessment of -PO4- groups binding to the subsurface Pb atoms. Atomistic MD simulations of ligand-capped CsPbCl3 surfaces aid in the interpretation of this information and suggest that ligand -N(CH3)3+ and -PO4- head-groups substitute Cs+ and Cl- ions, respectively, at the CsCl-terminated surface of the NCs. These detailed atomistic insights into surface structures can further guide the engineering of various relevant surface-capping zwitterionic ligands for diverse metal halide perovskite NCs.

Effect of Dynamical Motion in ab Initio Calculations of Solid-State Nuclear Magnetic and Nuclear Quadrupole Resonance Spectra

Solid-state nuclear magnetic resonance (SSNMR) and nuclear quadrupole resonance (NQR) spectra provide detailed information about the electronic and atomic structure of solids. Modern ab initio methods such as density functional theory (DFT) can be used to calculate NMR and NQR spectra from first-principles, providing a meaningful avenue to connect theory and experiment. Prediction of SSNMR and NQR spectra from DFT relies on accurate calculation of the electric field gradient (EFG) tensor associated with the potential of electrons at the nuclear centers. While static calculations of EFGs are commonly seen in the literature, the effects of dynamical motion of atoms in molecules and solids have been less explored. In this study, we develop a method to calculate EFGs of solids while taking into account the dynamics of atoms through DFT-based molecular dynamics simulations. The method we develop is general, in the sense that it can be applied to any material at any desired temperature and pressure. Here, we focus on application of the method to NaNO2 and study in detail the EFGs of 14N, 17O, and 23Na. We find in the cases of 14N and 17O that the dynamical motion of the atoms can be used to calculate mean EFGs that are in closer agreement with experiments than those of static calculations. For 23Na, we find a complex behavior of the EFGs when atomic motion is incorporated that is not at all captured in static calculations. In particular, we find a distribution of EFGs that is influenced strongly by the local (changing) bond environment, with a pattern that reflects the coordination structure of 23Na. We expect the methodology developed here to provide a path forward for understanding materials in which static EFG calculations do not align with experiments.

Hydrogen Diffusion in Hybrid Perovskites from Exchange NMR

Ion migration is an important phenomenon affecting the performance of hybrid perovskite solar cells. It is particularly challenging, however, to disentangle the contribution of H+ diffusion from that of other ions, and the atomic-scale mechanism remains unclear. Here, we use 2H exchange NMR to prove that 2H+ ions exchange between MA+ cations on the time scale of seconds for both MAPbI3 and FA0.7MA0.3PbI3 perovskites. We do this by exploiting 15N-enriched MA+ to label the cations by their 15N spin state. The exchange rates and activation energy are then calculated by performing experiments as functions of mixing time and temperature. By comparing the measured exchange rates to previously measured bulk H+ diffusivities, we demonstrate that, after dissociating, H+ ions travel through the lattice before associating to another cation rather than hopping between adjacent cations.

In Situ Characterization of Metastable Pb3O5 and Pb2O3 Phases During Thermal Decomposition of PbO2 to PbO

Nonstoichiometric lead oxides play a key role in the formation and cycling of the positive electrodes in a lead acid battery. These phases have been linked to the underutilization of the positive active material but also play a key role in the battery's cycle life, providing interparticle adhesion and the connection to the underlying lead grid. Similar phases have previously been identified by mass loss or color change during thermal annealing of PbO2 to PbO, suggesting that at least two intermediate PbOx phases exist. Using multiple, in situ analysis techniques (powder diffraction, X-ray absorption, X-ray photoelectron spectroscopy) and ex situ nuclear magnetic resonance measurements, the structural conversion and changes in the lead oxidation state were identified during this process. Isolation of the PbOx phases enabled confirmation of Pb3O5 and Pb2O3 by diffraction and the first 207Pb NMR measurement of these intermediates. The thermodynamic and kinetic stability of these intermediates and other reported polymorphs were determined by density functional theory, providing key insight into their origins and variation of PbOx structures found in previous studies.

Quantifying Organic Cation Ratios in Metal Halide Perovskites: Insights from X-ray Photoelectron Spectroscopy and Nuclear Magnetic Resonance Spectroscopy

The employment of metal halide perovskites (MHPs) in various optoelectronic applications requires the preparation of thin films whose composition plays a crucial role. Yet, the composition of the MHP films is rarely reported in the literature, partly because quantifying the actual organic cation composition cannot be done with conventional characterization methods. For MHPs, NMR has gained popularity, but for films, tedious processes like scratching several films are needed. Here, we use mechanochemical synthesis of MA1-x FA x PbI3 powders with various MA+: FA+ ratios and combine solid-state NMR spectroscopy (ssNMR) and X-ray photoelectron spectroscopy (XPS) to provide a reference characterization protocol for the organic cations' quantification in either powder form or films. Following this, we demonstrate that organic cation ratio quantification on thin films with ssNMR can be done without scraping the film and using significantly less mass than typically needed, that is, employing a single ∼800 nm-thick MA1-x FA x PbI3 film deposited by pulsed laser deposition (PLD) onto a 1 × 1 in.2, 0.2 mm-thick quartz substrate. While background signals from the quartz substrate appear in the 1H ssNMR spectra, the MA+ and FA+ signals are easily distinguishable and can be quantified. This study highlights the importance of calibrating and quantifying the source and the thin film organic cation ratio, as key for future optimization and scalability of physical vapor deposition processes.

Disorder and Halide Distributions in Cesium Lead Halide Nanocrystals as Seen by Colloidal 133Cs Nuclear Magnetic Resonance Spectroscopy

Colloidal nuclear magnetic resonance (cNMR) spectroscopy on inorganic cesium lead halide nanocrystals (CsPbX3 NCs) is found to serve for noninvasive characterization and quantification of disorder within these structurally soft and labile particles. In particular, we show that 133Cs cNMR is highly responsive to size variations from 3 to 11 nm or to altering the capping ligands on the surfaces of CsPbX3 NCs. Distinct 133Cs signals are attributed to the surface and core NC regions. Increased heterogeneous broadening of 133Cs signals, observed for smaller NCs as well as for long-chain zwitterionic capping ligands (phosphocholines, phosphoethanol(propanol)amine, and sulfobetaines), can be attributed to more significant surface disorder and multifaceted surfaces (truncated cubes). On the contrary, capping with dimethyldidodecylammonium bromide (DDAB) successfully reduces signal broadening owing to better surface passivation and sharper (001)-bound cuboid shape. DFT calculations on various sizes of NCs corroborate the notion that the surface disorder propagates over several octahedral layers. 133Cs NMR is a sensitive probe for studying halide gradients in mixed Br/Cl NCs, indicating bromide-rich surfaces and chloride-rich cores. On the contrary, mixed Br/I NCs exhibit homogeneous halide distributions.

Axial-Equatorial Halide Ordering in Layered Hybrid Perovskites from Isotropic-Anisotropic 207 Pb NMR

Bandgap-tuneable mixed-halide 3D perovskites are of interest for multi-junction solar cells, but suffer from photoinduced spatial halide segregation. Mixed-halide 2D perovskites are more resistant to halide segregation and are promising coatings for 3D perovskite solar cells. The properties of mixed-halide compositions depend on the local halide distribution, which is challenging to study at the level of single octahedra. In particular, it has been suggested that there is a preference for occupation of the distinct axial and equatorial halide sites in mixed-halide 2D perovskites. 207 Pb NMR can be used to probe the atomic-scale structure of lead-halide materials, but although the isotropic 207 Pb shift is sensitive to halide stoichiometry, it cannot distinguish configurational isomers. Here, we use 2D isotropic-anisotropic correlation 207 Pb NMR and relativistic DFT calculations to distinguish the [PbX6 ] configurations in mixed iodide-bromide 3D FAPb(Br1-x Ix )3 perovskites and 2D BA2 Pb(Br1-x Ix )4 perovskites based on formamidinium (FA+ ) and butylammonium (BA+ ), respectively. We find that iodide preferentially occupies the axial site in BA-based 2D perovskites, which may explain the suppressed halide mobility.

Phase Transitions and Dynamics in Mixed Three- and Low-Dimensional Lead Halide Perovskites

Lead halide perovskites are extensively investigated as efficient solution-processable materials for photovoltaic applications. The greatest stability and performance of these compounds are achieved by mixing different ions at all three sites of the APbX3 structure. Despite the extensive use of mixed lead halide perovskites in photovoltaic devices, a detailed and systematic understanding of the mixing-induced effects on the structural and dynamic aspects of these materials is still lacking. The goal of this review is to summarize the current state of knowledge on mixing effects on the structural phase transitions, crystal symmetry, cation and lattice dynamics, and phase diagrams of three- and low-dimensional lead halide perovskites. This review analyzes different mixing recipes and ingredients providing a comprehensive picture of mixing effects and their relation to the attractive properties of these materials.

Chemical Behavior and Local Structure of the Ruddlesden-Popper and Dion-Jacobson Alloyed Pb/Sn Bromide 2D Perovskites

The alloyed lead/tin (Pb/Sn) halide perovskites have gained significant attention in the development of tandem solar cells and other optoelectronic devices due to their widely tunable absorption edge. To gain a better understanding of the intriguing properties of Pb/Sn perovskites, such as their anomalous bandgap's dependence on stoichiometry, it is important to deepen the understanding of their chemical behavior and local structure. Herein, we investigate a series of two-dimensional Ruddlesden-Popper (RP) and Dion-Jacobson (DJ) phase alloyed Pb/Sn bromide perovskites using butylammonium (BA) and 3-(aminomethyl)pyridinium (3AMPY) as the spacer cations: (BA)₂(MA)_n-1Pb_xSn_n-xBr_3n+1 (n = 1-3) and (3AMPY)(MA)_n-1Pb_xSn_n-xBr_3n+1 (n = 1-3) through a solution-based approach. Our results show that the ratio and site preference of Pb/Sn atoms are influenced by the layer thickness (n) and spacer cations (A'), as determined by single-crystal X-ray diffraction. Solid-state ¹H, ¹¹⁹Sn, and ²⁰⁷Pb NMR spectroscopy analysis shows that the Pb atoms prefer the outer layers in n = 3 members: (BA)₂(MA)Pb_xSn_n-xBr₁₀ and (3AMPY)(MA)Pb_xSn_n-xBr₁₀. Layered 2D DJ alloyed Pb/Sn bromide perovskites (3AMPY)(MA)_n-1Pb_xSn_n-xBr_3n+1 (n = 1-3) demonstrate much narrower optical band gaps, lower energy PL emission peaks, and longer carrier lifetimes compared to those of RP analogs. Density functional theory calculations suggest that Pb-rich alloys (Pb:Sn ∼4:1) for n = 1 compounds are thermodynamically favored over 50:50 (Pb:Sn ∼1:1) compositions. From grazing-incidence wide-angle X-ray scattering (GIWAXS), we see that films in the RP phase orient parallel to the substrate, whereas for DJ cases, random orientations are observed relative to the substrate.

3D to 0D cesium lead bromide: A 79/81Br NMR, NQR and theoretical investigation

Inorganic metal halides offer unprecedented tunability through elemental variation of simple three-element compositions, but can exhibit complicated phase behaviour, degradation, and microscopic phenomena (disorder/dynamics) that play an integral role for the bulk-level chemical and physical properties of these materials. Understanding the halogen chemical environment in such materials is crucial to addressing many of the concerns regarding implementing these materials in commercial applications. In this study, a combined solid-state nuclear magnetic resonance, nuclear quadrupole resonance and quantum chemical computation approach is used to interrogate the Br chemical environment in a series of related inorganic lead bromide materials: CsPbBr₃, CsPb₂Br₅, and Cs₄PbBr₆. The quadrupole coupling constants (C_Q) were determined to range from 61 to 114 MHz for ⁸¹Br, with CsPbBr₃ exhibiting the largest measured C_Q and Cs₄PbBr₆ the smallest. GIPAW DFT was shown to be an excellent pre-screening tool for estimating the EFG of Br materials and can increase experimental efficiency by providing good starting estimates for acquisition. Finally, the combination of theory and experiment to inform the best methods for expanding further to the other quadrupolar halogens is discussed.

Lead(II) 2-Ethylhexanoate for Simultaneous Modulated Crystallization and Surface Shielding to Boost Perovskite Solar Cell Efficiency and Stability

The bulk and surface of a perovskite light-harvesting layer are two pivotal aspects affecting its carrier transport and long-term stability. In this work, lead(II) 2-ethylhexanoate (LDE) is introduced via an antisolvent process into perovskite films to change the reaction kinetics of the crystallization process, resulting in a high-quality perovskite film. Meanwhile, a carboxyl functional group with a long alkyl chain coordinates with the Pb cation, reducing the defect density related to unsaturated Pb atoms. Moreover, the long alkyl chains form a protecting layer at the surface of the perovskite film to prevent chemical attack by water and air, prolonging the lifetime of perovskite devices. Consequently, the assembled device demonstrates a power conversion efficiency (PCE) of 24.84%. Both of the thermal and operational stability are significantly improved due to reduced ion-migration channels.

Understanding the Degradation of Methylenediammonium and Its Role in Phase-Stabilizing Formamidinium Lead Triiodide

Formamidinium lead triiodide (FAPbI₃) is the leading candidate for single-junction metal-halide perovskite photovoltaics, despite the metastability of this phase. To enhance its ambient-phase stability and produce world-record photovoltaic efficiencies, methylenediammonium dichloride (MDACl₂) has been used as an additive in FAPbI₃. MDA²⁺ has been reported as incorporated into the perovskite lattice alongside Cl^-. However, the precise function and role of MDA²⁺ remain uncertain. Here, we grow FAPbI₃ single crystals from a solution containing MDACl₂ (FAPbI₃-M). We demonstrate that FAPbI₃-M crystals are stable against transformation to the photoinactive δ-phase for more than one year under ambient conditions. Critically, we reveal that MDA²⁺ is not the direct cause of the enhanced material stability. Instead, MDA²⁺ degrades rapidly to produce ammonium and methaniminium, which subsequently oligomerizes to yield hexamethylenetetramine (HMTA). FAPbI₃ crystals grown from a solution containing HMTA (FAPbI₃-H) replicate the enhanced α-phase stability of FAPbI₃-M. However, we further determine that HMTA is unstable in the perovskite precursor solution, where reaction with FA⁺ is possible, leading instead to the formation of tetrahydrotriazinium (THTZ-H⁺). By a combination of liquid- and solid-state NMR techniques, we show that THTZ-H⁺ is selectively incorporated into the bulk of both FAPbI₃-M and FAPbI₃-H at ∼0.5 mol % and infer that this addition is responsible for the improved α-phase stability.

Effect of aliovalent bismuth substitution on structure and optical properties of CsSnBr3

Aliovalent substitution of the B component in ABX3 metal halides has often been proposed to modify the band gap and thus the photovoltaic properties, but details about the resulting structure have remained largely unknown. Here, we examine these effects in Bi-substituted CsSnBr3. Powder X-ray diffraction (XRD) and solid-state 119Sn, 133Cs and 209Bi nuclear magnetic resonance (NMR) spectroscopy were carried out to infer how Bi substitution changes the structure of these compounds. The cubic perovskite structure is preserved upon Bi-substitution, but with disorder in the B site occurring at the atomic level. Bi atoms are randomly distributed as they substitute for Sn atoms with no evidence of Bi segregation. The absorption edge in the optical spectra shifts from 1.8 to 1.2 eV upon Bi-substitution, maintaining a direct band gap according to electronic structure calculations. It is shown that Bi-substitution improves resistance to degradation by inhibiting the oxidation of Sn.

Porous and Water Stable 2D Hybrid Metal Halide with Broad Light Emission and Selective H2 O Vapor Sorption

In this work we report a strategy for generating porosity in hybrid metal halide materials using molecular cages that serve as both structure-directing agents and counter-cations. Reaction of the [2.2.2] cryptand (DHS) linker with Pb^II in acidic media gave rise to the first porous and water-stable 2D metal halide semiconductor (DHS)₂ Pb₅ Br₁₄ . The corresponding material is stable in water for a year, while gas and vapor-sorption studies revealed that it can selectively and reversibly adsorb H₂ O and D₂ O at room temperature (RT). Solid-state NMR measurements and DFT calculations verified the incorporation of H₂ O and D₂ O in the organic linker cavities and shed light on their molecular configuration. In addition to porosity, the material exhibits broad light emission centered at 617 nm with a full width at half-maximum (FWHM) of 284 nm (0.96 eV). The recorded water stability is unparalleled for hybrid metal halide and perovskite materials, while the generation of porosity opens new pathways towards unexplored applications (e.g. solid-state batteries) for this class of hybrid semiconductors.

Triangulating Dopant-Level Mn(II) Insertion in a Cs2NaBiCl6 Double Perovskite Using Magnetic Resonance Spectroscopy

Lead-free metal halide double perovskites are gaining increasing attention for optoelectronic applications. Specifically, doping metal halide double perovskites using transition metals enables broadband tailorability of the optical bandgap for these emerging semiconducting materials. One candidate material is Mn(II)-doped Cs₂NaBiCl₆, but the nature of Mn(II) insertion on chemical structure is poorly understood due to low Mn loading. It is critical to determine the atomic-level structure at the site of Mn(II) incorporation in doped perovskites to better understand the structure-property relationships in these materials and thus to advance their applicability to optoelectronic applications. Magnetic resonance spectroscopy is uniquely qualified to address this, and thus a comprehensive three-pronged strategy, involving solid-state nuclear magnetic resonance (NMR), high-field dynamic nuclear polarization (DNP), and electron paramagnetic resonance (EPR) spectroscopies, is used to identify the location of Mn(II) insertion in Cs₂NaBiCl₆. Multinuclear (²³Na, ³⁵Cl, ¹³³Cs, and ²⁰⁹Bi) one-dimensional (1D) magnetic resonance spectra reveal a low level of Mn(II) incorporation, with select spins affected by paramagnetic relaxation enhancement (PRE) induced by Mn(II) neighbors. EPR measurements confirm the oxidation state, octahedral symmetry, and low doping levels of the Mn(II) centers. Complementary EPR and NMR measurements confirm that the cubic structure is maintained with Mn(II) incorporation at room temperature, but the structure deviates slightly from cubic symmetry at low temperatures (<30 K). HYperfine Sublevel CORrelation (HYSCORE) EPR spectroscopy explores the electron-nuclear correlations of Mn(II) with ²³Na, ¹³³Cs, and ³⁵Cl. The absence of ²⁰⁹Bi correlations suggests that Bi centers are replaced by Mn(II). Endogenous DNP NMR measurements from Mn(II) → ¹³³Cs (<30 K) reveal that the solid effect is the dominant mechanism for DNP transfer and supports that Mn(II) is homogeneously distributed within the double-perovskite structure.

Disorder to order: how halide mixing in MAPbI3-xBrx perovskites restricts MA dynamics

Mixed-halide lead perovskites are of particular interest for the design of tandem solar cells currently reaching record efficiencies. While halide phase segregation upon illumination of mixed perovskites is extensively studied, the effect of halide disorder on A cation dynamics is not well understood, despite its importance for charge carrier diffusion and lifetime. Here, we study the methylammonium (MA) reorientational dynamics in mixed halide MAPbI_3-xBr_x perovskites by a combined approach of experimental solid-state NMR spectroscopy and molecular dynamics (MD) simulations based on machine-learning force-fields (MLFF). ²⁰⁷Pb NMR spectra indicate the halides are randomly distributed over their lattice positions, whereas PXRD measurements show that all mixed MAPbI_3-xBr_x samples are cubic. The experimental ¹⁴N spectra and ¹H double-quantum (DQ) NMR data reveal anisotropic MA reorientations depending on the halide composition and thus associated disorder in the inorganic sublattice. MD calculations allow us to correlate these experimental results to restrictions of MA dynamics due to preferred MA orientations in their local Pb₈I_12-nBr_n "cages". Based on the experimental and simulated results, we develop a phenomenological model that correlates the ¹H dipolar coupling and thus the MA dynamics with the local composition and reproduces the experimental data over the whole composition range. We show that the dominant interaction between the MA cations and the Pb-X lattice that influences the cation dynamics is the local electrostatic potential being inhomogeneous in mixed halide systems. As such, we generate a fundamental understanding of the predominant interaction between the MA cations and the inorganic sublattice, as well as MA dynamics in asymmetric halide coordinations.

Lattice-Distortion-Induced Change in the Magnetic Properties in Br-Defect Host CsPbBr3 Perovskite Quantum Dots

Herein, we report temperature- and field-induced magnetic states in CsPbBr₃ perovskite quantum dots (PQDs) attributed to Br defects. We find that temperature-dependent structural distortion is the main source of various temperature-induced magnetic states in Br-defect host CsPbBr₃ PQDs. Comprehensively examined magnetization data through Arrott plots, Langevin and Brillouin function fitting, and structural analysis reveal the presence of various oxidation states (i.e., Pb⁰, Pb⁺, Pb²⁺, and Pb³⁺) yielding different magnetic states, such as diamagnetic states above 90 K, paramagnetic states below ≈90 K, and perhaps locally ordered states between 58 and 90 K. It is realized from theoretical fits that paramagnetic ions exist (i.e., superparamagnetic behavior) due to Br defects causing Pb⁺ (and/or Pb³⁺ ions) in the diamagnetic region. We anticipate that our findings will spur future research of the development of spin-optoelectronics, such as spin light-emitting diodes, and spintronics devices based on CsPbBr₃ PQDs.

Light-Induced Structural Dynamics and Charge Transport in Layered Halide Perovskite Thin Films

The dynamic nature of the metal halide perovskite lattice upon photoexcitation plays a vital role in their properties. Here we report an observation of light-induced structure dynamics in quasi-2D Ruddlesden-Popper phase perovskite thin films and its impact on the carrier transport properties. By a time-resolved X-ray scattering technique, we observe a rapid lattice expansion upon photoexcitation, followed by a slow relaxation over the course of 100 ns in the dark. Theoretical modeling suggests that the expansion originates from the lattice's thermal fluctuations caused by photon energy deposition. Power dependent optical spectroscopy and photoconductivity indicate that high laser powers triggered a strong local structural disorder, which increased the charge dissociation activation energy that results in localized transport. Our study investigates the impact of laser energy deposition on the lattices and the subsequent carrier transport properties, that are relevant to device operations.

Solid-State Nuclear Magnetic Resonance of Triple-Cation Mixed-Halide Perovskites

Mixed-cation lead mixed-halide perovskites are the best candidates for perovskite-based photovoltaics, thanks to their higher efficiency and stability compared to the single-cation single-halide parent compounds. TripleMix (Cs0.05MA0.14FA0.81PbI2.55Br0.45 with FA = formamidinium and MA = methylammonium) is one of the most efficient and stable mixed perovskites for single-junction solar cells. The microscopic reasons why triple-cation perovskites perform so well are still under debate. In this work, we investigated the structure and dynamics of TripleMix by exploiting multinuclear solid-state nuclear magnetic resonance (SSNMR), which can provide this information at a level of detail not accessible by other techniques. 133Cs, 13C, 1H, and 207Pb SSNMR spectra confirmed the inclusion of all ions in the perovskite, without phase segregation. Complementary measurements showed a peculiar longitudinal relaxation behavior for the 1H and 207Pb nuclei in TripleMix with respect to single-cation single-halide perovskites, suggesting slower dynamics of both organic cations and halide anions, possibly related to the high photovoltaic performances.

Tailoring the Time-Averaged Structure for Polarization-Sensitive Chiral Perovskites

Chiral perovskites have emerged as promising candidates for polarization-sensing materials. Despite their excellent chiroptical properties, the nature of their multiple-quantum-well structures is a critical hurdle for polarization-based and spintronic applications. Furthermore, as the origin of chiroptical activity in chiral perovskites is still illusive, the strategy for simultaneously enhancing the chiroptical activity and charge transport has not yet been reported. Here, we demonstrated that incorporating a Lewis base into the lattice can effectively tune the chiroptical response and electrical properties of chiral perovskites. Through solid-state nuclear magnetic resonance spectroscopic measurements and theoretical calculations, it was demonstrated that the material property manipulation resulted from the change in the time-averaged structure induced by the Lewis base. Finally, as a preliminary proof of concept, a vertical-type circularly polarized light photodetector based on chiral perovskites was developed, exhibiting an outstanding performance with a distinguishability of 0.27 and a responsivity of 0.43 A W^-1.

Interplay of Kinetic and Thermodynamic Reaction Control Explains Incorporation of Dimethylammonium Iodide into CsPbI3

CsPbI3 is a promising material for optoelectronics owing to its thermal robustness and favorable bandgap. However, its fabrication is challenging because its photoactive phase is thermodynamically unstable at room temperature. Adding dimethylammonium (DMA) alleviates this instability and is currently understood to result in the formation of DMA x Cs1-x PbI3 perovskite solid solutions. Here, we use NMR of the 133Cs and 13C local structural probes to show that these solid solutions are not thermodynamically stable, and their synthesis under thermodynamic control leads to a segregated mixture of yellow one-dimensional DMAPbI3 phase and δ-CsPbI3. We show that mixed-cation DMA x Cs1-x PbI3 perovskite phases only form when they are kinetically trapped by rapid antisolvent-induced crystallization. We explore the energetics of DMA incorporation into CsPbI3 using first-principles calculations and molecular dynamics simulations and find that this process is energetically unfavorable. Our results provide a complete atomic-level picture of the mechanism of DMA-induced stabilization of the black perovskite phase of CsPbI3 and shed new light on this deceptively simple material.

A powder XRD, solid state NMR and calorimetric study of the phase evolution in mechanochemically synthesized dual cation (Csx(CH3NH3)1-x)PbX3 lead halide perovskite systems

Methylammonium (MA⁺) lead halide perovskites (MAPbX₃) have been widely investigated for photovoltaic applications, with the addition of Cs improving structural and thermal stability. This study reports the complete A site miscibility of Cs⁺ and MA⁺ cations in the lead chloride and lead bromide perovskites with nominal stoichiometric formulae (Cs_xMA_1-x)Pb(Cl/Br)₃ (x = 0, 0.13, 0.25, 0.37, 0.50, 0.63, 0.75, 0.87, 1). These suites of materials were synthesized mechanochemically as a simple, cost-effective synthesis technique to produce highly ordered, single phase particles. In contrast to previous studies using conventional synthetic routes that have reported significant solubility gaps, this solvent-free approach induces complete miscibility within the dual cation Cs⁺/MA⁺ system, with the resultant structures exhibiting high short-range and long-range atomic ordering across the entire compositional range that are devoid of solvent inclusions and disorder. The subtle structural evolution from cubic to orthorhombic symmetry reflecting PbX₆ octahedral tilting was studied using complementary high resolution TEM, powder XRD, multinuclear ¹³³Cs/²⁰⁷Pb/¹H MAS NMR, DSC, XPS and UV/vis approaches. The phase purity and exceptional structural order were reflected in the very high resolution HRTEM images presented from particles with crystallite sizes in the ∼80-170 nm range, and the stability and long lifetimes of the Br series (10-20 min) and the Cl series (∼30 s-1 min) under the 200 kV/146 μA e^- beam. Rietveld refinements associated with the room temperature PXRD study demonstrated that each system converged towards single phase compositions that were very close to the intended target stoichiometries, thus indicating the complete miscibility within these dual cation Cs⁺/MA⁺ solid solution systems. The multinuclear MAS NMR data showed a distinct sensitivity to the changing solid solution compositions across the MAPbX₃-CsPbX₃ partition. In particular, the ¹³³Cs shifts demonstrated a sensitivity to the cubic-orthorhombic phase transition while the ¹³³Cs T₁s exhibited a pronounced sensitivity to the variable Cs⁺ cation mobility across the compositional range. Variable temperature PXRD studies facilitated the production of phase diagrams mapping the Cs⁺/MA⁺ compositional space for the (Cs_xMA_1-x)PbCl₃ and (Cs_xMA_1-x)PbBr₃ solid solution series, while Tauc plots of the UV/vis data exhibited reducing bandgaps with increasing MA⁺ incorporation through ranges of cubic phases where octahedral tilting was absent.

The Landé factors of electrons and holes in lead halide perovskites: universal dependence on the band gap

The Landé or g-factors of charge carriers are decisive for the spin-dependent phenomena in solids and provide also information about the underlying electronic band structure. We present a comprehensive set of experimental data for values and anisotropies of the electron and hole Landé factors in hybrid organic-inorganic (MAPbI₃, MAPb(Br_0.5Cl_0.5)₃, MAPb(Br_0.05Cl_0.95)₃, FAPbBr₃, FA_0.9Cs_0.1PbI_2.8Br_0.2, MA=methylammonium and FA=formamidinium) and all-inorganic (CsPbBr₃) lead halide perovskites, determined by pump-probe Kerr rotation and spin-flip Raman scattering in magnetic fields up to 10 T at cryogenic temperatures. Further, we use first-principles density functional theory (DFT) calculations in combination with tight-binding and k ⋅ p approaches to calculate microscopically the Landé factors. The results demonstrate their universal dependence on the band gap energy across the different perovskite material classes, which can be summarized in a universal semi-phenomenological expression, in good agreement with experiment.

The Landé factors govern all the spin-related basic phenomena and are the key parameters which guide spintronics applications. Here, Kirstein et al. demonstrate a universal dependence of the Landé factors on the bandgap energy of several perovskite materials.

Exploring Structural Nuances in Germanium Halide Perovskites Using Solid-State 73Ge and 133Cs NMR Spectroscopy

Metal halide perovskites remain top candidates for higher-performance photovoltaic devices, but concerns about leading lead-based materials remain. Ge perovskites remain understudied for use in solar cells compared to their Sn-based counterparts. In this work, we undertake a combined ⁷³Ge and ¹³³Cs solid-state Nuclear Magnetic Resonance (NMR) spectroscopy and density functional theory (DFT) study of the bulk CsGeX₃ (X = Cl, Br, or I) series. We show how seemingly small structural variations within germanium halide perovskites have major effects on their ⁷³Ge and ¹³³Cs NMR signatures and reveal a near-cubic phase at room temperature for CsGeCl₃ with severe local Ge polyhedral distortion. Quantum chemical computations are effective at predicting the structural impact on NMR parameters for ⁷³Ge and ¹³³Cs. This study demonstrates the value of a combined solid-state NMR and DFT approach for investigating promising materials for energy applications, providing information that is out of reach with conventional characterization methods, and adds the challenging ⁷³Ge nucleus to the NMR toolkit.

Reversible Photochromism in ⟨110⟩ Oriented Layered Halide Perovskite

Extending halide perovskites' optoelectronic properties to stimuli-responsive chromism enables switchable optoelectronics, information display, and smart window applications. Here, we demonstrate a band gap tunability (chromism) via crystal structure transformation from three-dimensional FAPbBr₃ to a ⟨110⟩ oriented FA_n+2Pb_nBr_3n+2 structure using a mono-halide/cation composition (FA/Pb) tuning. Furthermore, we illustrate reversible photochromism in halide perovskite by modulating the intermediate n phase in the FA_n+2Pb_nBr_3n+2 structure, enabling greater control of the optical band gap and luminescence of a ⟨110⟩ oriented mono-halide/cation perovskite. Proton transfer reaction-mass spectroscopy carried out to precisely quantify the decomposition product reveals that the organic solvent in the film is a key contributor to the structural transformation and, therefore, the chromism in the ⟨110⟩ structure. These intermediate n phases (2 ≤ n ≤ ∞) stabilize in metastable states in the FA_n+2Pb_nBr_3n+2 system, which is accessible via strain or optical or thermal input. The structure reversibility in the ⟨110⟩ perovskite allowed us to demonstrate a class of photochromic sensors capable of self-adaptation to lighting.

Stabilized tilted-octahedra halide perovskites inhibit local formation of performance-limiting phases

[Figure: see text].

The Role of Alkyl Chain Length and Halide Counter Ion in Layered Dion-Jacobson Perovskites with Aromatic Spacers

Layered hybrid perovskites based on Dion-Jacobson phases are of interest to various optoelectronic applications. However, the understanding of their structure-property relationships remains limited. Here, we present a systematic study of Dion-Jacobson perovskites based on (S)PbX₄ (n = 1) compositions incorporating phenylene-derived aromatic spacers (S) with different anchoring alkylammonium groups and halides (X = I, Br). We focus our study on 1,4-phenylenediammonium (PDA), 1,4-phenylenedimethylammonium (PDMA), and 1,4-phenylenediethylammonium (PDEA) spacers. Systems based on PDA did not form a well-defined layered structure, showing the formation of a 1D structure instead, whereas the extension of the alkyl chains to PDMA and PDEA rendered them compatible with the formation of a layered structure, as shown by X-ray diffraction and solid-state NMR spectroscopy. In addition, the control of the spacer length affects optical properties and environmental stability, which is enhanced for longer alkyl chains and bromide compositions. This provides insights into their design for optoelectronic applications.

Nanoscale interfacial engineering enables highly stable and efficient perovskite photovoltaics

We present a facile molecular-level interface engineering strategy to augment the long-term operational and thermal stability of perovskite solar cells (PSCs) by tailoring the interface between the perovskite and hole transporting layer (HTL) with a multifunctional ligand 2,5-thiophenedicarboxylic acid. The solar cells exhibited high operational stability (maximum powering point tracking at one sun illumination) with a stabilized T _S80 (the time over which the device efficiency reduces to 80% after initial burn-in) of ≈5950 h at 40 °C and a stabilized power conversion efficiency (PCE) over 23%. The origin of high device stability and performance is correlated to the nano/sub-nanoscale molecular level interactions between ligand and perovskite layer, which is further corroborated by comprehensive multiscale characterization. These results provide insights into the modulation of the grain boundaries, local density of states, surface bandgap, and interfacial recombination. Chemical analysis of aged devices showed that molecular passivation suppresses interfacial ion diffusion and inhibits the photoinduced I₂ release that irreversibly degrades the perovskite. The interfacial engineering strategies enabled by multifunctional ligands can expedite the path towards stable PSCs.

Structure and surface properties of size-tuneable CsPbBr3 nanocrystals

This investigation has characterised the structure and surface chemistry of CsPbBr₃ nanocrystals with controlled diameters between 6.4 to 12.8 nm. The nanocrystals were investigated via a thorough ¹³³Cs solid state NMR and nuclear relaxation study, identifying and mapping radially-increasing nanoscale disorder. This work has formalised ¹³³Cs NMR as a highly sensitive probe of nanocrystal size, which can conveniently analyse nanocrystals in solid forms, as they would be utilised in optoelectronic devices. A combined multinuclear solid state NMR and XPS approach, including ¹³³Cs-¹H heteronuclear correlation 2D (HETCOR) NMR, was utilised to study the nanocrystal surface and ligands, demonstrating that the surface is Cs-Br rich with vacancies passivated by didodecyldimethylammonium bromide (DDAB) ligands. Furthermore, it is shown that a negligible amount of phosphonate ligands remain on the powder nanocrystal surface, despite the key role of octylphosphonic acid (OPA) in controlling the colloidal nanocrystal growth. The CsPbBr₃ NCs were shown to be structurally stable under ambient conditions for up to 6 months, albeit with some particle agglomeration.

Interactions between favipiravir and a BNC cage towards drug delivery applications

Electronic structure analysis of bimolecular formation of favipiravir (Fav) and a representative model of boron-nitrogen-carbon (BNC) cage was performed in this work for providing more insightful information regarding the drug delivery purposes by the importance of Fav drug for medication of COVID-19. To achieve the purpose of this work, density functional theory (DFT) calculations were carried out to obtain the stabilized structures and corresponding molecular and atomic scale descriptors. Six models of BNC-Fav complexes were obtained reading the participation of different atomic positions of Fav to interactions with the BNC cage surface. The results yielded BNC-Fav2 at the highest strength and BNC-Fav4 at the lowest strength of bimolecular formations. Molecular orbital–related features and atomic scale quadrupole coping constants all revealed that BNC-Fav2 complex could be proposed for employing in drug delivery process by managing the loaded Fav contribution to future interactions.

NMR spectroscopy probes microstructure, dynamics and doping of metal halide perovskites

Solid-state magic-angle spinning NMR spectroscopy is a powerful technique to probe atomic-level microstructure and structural dynamics in metal halide perovskites. It can be used to measure dopant incorporation, phase segregation, halide mixing, decomposition pathways, passivation mechanisms, short-range and long-range dynamics, and other local properties. This Review describes practical aspects of recording solid-state NMR data on halide perovskites and how these afford unique insights into new compositions, dopants and passivation agents. We discuss the applicability, feasibility and limitations of ¹H, ¹³C, ¹⁵N, ¹⁴N, ¹³³Cs, ⁸⁷Rb, ³⁹K, ²⁰⁷Pb, ¹¹⁹Sn, ¹¹³Cd, ²⁰⁹Bi, ¹¹⁵In, ¹⁹F and ²H NMR in typical experimental scenarios. We highlight the pivotal complementary role of solid-state mechanosynthesis, which enables highly sensitive NMR studies by providing large quantities of high-purity materials of arbitrary complexity and of chemical shifts calculated using density functional theory. We examine the broader impact of solid-state NMR on materials research and how its evolution over seven decades has benefitted structural studies of contemporary materials such as halide perovskites. Finally, we summarize some of the open questions in perovskite optoelectronics that could be addressed using solid-state NMR. We, thereby, hope to stimulate wider use of this technique in materials and optoelectronics research.

The Contribution of NMR Spectroscopy in Understanding Perovskite Stabilization Phenomena

Although it has been exploited since the late 1900s to study hybrid perovskite materials, nuclear magnetic resonance (NMR) spectroscopy has only recently received extraordinary research attention in this field. This very powerful technique allows the study of the physico-chemical and structural properties of molecules by observing the quantum mechanical magnetic properties of an atomic nucleus, in solution as well as in solid state. Its versatility makes it a promising technique either for the atomic and molecular characterization of perovskite precursors in colloidal solution or for the study of the geometry and phase transitions of the obtained perovskite crystals, commonly used as a reference material compared with thin films prepared for applications in optoelectronic devices. This review will explore beyond the current focus on the stability of perovskites (3D in bulk and nanocrystals) investigated via NMR spectroscopy, in order to highlight the chemical flexibility of perovskites and the role of interactions for thermodynamic and moisture stabilization. The exceptional potential of the vast NMR tool set in perovskite structural characterization will be discussed, aimed at choosing the most stable material for optoelectronic applications. The concept of a double-sided characterization in solution and in solid state, in which the organic and inorganic structural components provide unique interactions with each other and with the external components (solvents, additives, etc.), for material solutions processed in thin films, denotes a significant contemporary target.

Solid State NMR Spectroscopy a Valuable Technique for Structural Insights of Advanced Thin Film Materials: A Review

Solid-state NMR has proven to be a versatile technique for studying the chemical structure, 3D structure and dynamics of all sorts of chemical compounds. In nanotechnology and particularly in thin films, the study of chemical modification, molecular packing, end chain motion, distance determination and solvent-matrix interactions is essential for controlling the final product properties and applications. Despite its atomic-level research capabilities and recent technical advancements, solid-state NMR is still lacking behind other spectroscopic techniques in the field of thin films due to the underestimation of NMR capabilities, availability, great variety of nuclei and pulse sequences, lack of sensitivity for quadrupole nuclei and time-consuming experiments. This article will comprehensively and critically review the work done by solid-state NMR on different types of thin films and the most advanced NMR strategies, which are beyond conventional, and the hardware design used to overcome the technical issues in thin-film research.

Recent Advances in Ligand Design and Engineering in Lead Halide Perovskite Nanocrystals

Lead halide perovskite (LHP) nanocrystals (NCs) have recently garnered enhanced development efforts from research disciplines owing to their superior optical and optoelectronic properties. These materials, however, are unlike conventional quantum dots, because they possess strong ionic character, labile ligand coverage, and overall stability issues. As a result, the system as a whole is highly dynamic and can be affected by slight changes of particle surface environment. Specifically, the surface ligand shell of LHP NCs has proven to play imperative roles throughout the lifetime of a LHP NC. Recent advances in engineering and understanding the roles of surface ligand shells from initial synthesis, through postsynthetic processing and device integration, finally to application performances of colloidal LHP NCs are covered here.

Tunable Broad Light Emission from 3D "Hollow" Bromide Perovskites through Defect Engineering

Hybrid halide perovskites consisting of corner-sharing metal halide octahedra and small cuboctahedral cages filled with counter cations have proven to be prominent candidates for many high-performance optoelectronic devices. The stability limits of their three-dimensional perovskite framework are defined by the size range of the cations present in the cages of the structure. In some cases, the stability of the perovskite-type structure can be extended even when the counterions violate the size and shape requirements, as is the case in the so-called "hollow" perovskites. In this work, we engineered a new family of 3D highly defective yet crystalline "hollow" bromide perovskites with general formula (FA)_1-x(en)_x(Pb)_1-0.7x(Br)_3-0.4x (FA = formamidinium (FA⁺), en = ethylenediammonium (en²⁺), x = 0-0.44). Pair distribution function analysis shed light on the local structural coherence, revealing a wide distribution of Pb-Pb distances in the crystal structure as a consequence of the Pb/Br-deficient nature and en inclusion in the lattice. By manipulating the number of Pb/Br vacancies, we finely tune the optical properties of the pristine FAPbBr₃ by blue shifting the band gap from 2.20 to 2.60 eV for the x = 0.42 en sample. A most unexpected outcome was that at x> 0.33 en incorporation, the material exhibits strong broad light emission (1% photoluminescence quantum yield (PLQY)) that is maintained after exposure to air for more than a year. This is the first example of strong broad light emission from a 3D hybrid halide perovskite, demonstrating that meticulous defect engineering is an excellent tool for customizing the optical properties of these semiconductors.