A Design Strategy for Intrinsically Stretchable High-Performance Polymer Semiconductors: Incorporating Conjugated Rigid Fused-Rings with Bulky Side Groups

Chlorinated Bithiophene Imide-Based n-Type Polymers: Synthesis, Structure-Property Correlations, and Applications in Organic Electronic Devices

Developing electron-deficient (hetero)arenes with optimized geometries and electronic properties is imperative for advancing n-type polymers and organic electronic devices. We report here the design and synthesis of two chlorinated imide-functionalized electron-deficient heteroarenes, namely chlorine-substituted bithiophene imide (ClBTI) and its fused dimer (ClBTI2). The corresponding polymers show a near-planar framework, appropriate frontier molecular orbital levels, and good solubility. When integrated into organic thin-film transistors, ClBTI2-based n-type polymer afforded unipolar electron mobility of up to 0.48 cm2 V-1 s-1. The binary all-PSCs based on PM6 and new polymers show a power conversion efficiency (PCE) exceeding 1%. Interestingly, by introducing these polymers with ordered structure, high crystallinity, and sizable electron mobility as the third component into the host system PM6:PY-IT, continuous interpenetrating networks with large fibrillar structures can be formed. Investigations of charge transfer kinetics and energy loss analyses unveiled that ClBTI2-based n-type polymer P(ClBTI2-BTI) enables optimized charge transport, reduced charge recombination, and minimized non-radiative loss within the all-polymer ternary blends, yielding a remarkable PCE of 19.35% (certified: 19.20%) through optimizing the state-of-the-art PM6:PY-IT blend. The structure-property-performance relationships provide valuable insights into the design of electron-deficient (hetero)arenes and n-type polymers, marking a great progress in the development of high-performance n-type polymers for organic electronic devices.

Partially Degradable N-Type Conjugated Random Copolymers for Intrinsically Stretchable Organic Field-Effect Transistors

In this study, a series of conjugated homopolymers (P1 and P5) and random copolymers (P2-P4) by copolymerizing naphthalene diimide (NDI) as the acceptor with varying ratios of two donor units, thiophene-imine-thiophene (TIT) and thiophene-vinylene-thiophene (TVT) is developed. The inclusion of TIT imparted degradability to the random copolymers under acidic conditions, offering a sustainable solution for electronic waste management. Structural analysis revealed that TIT favored edge-on molecular orientation, while TVT promoted face-on and end-to-end orientations. The synergistic combination of TIT and TVT in copolymerization resulted in balanced structural and functional properties with partial degradability conferred using the TIT units. The random copolymer P3, with an optimal equimolar TIT/TVT ratio, demonstrates superior electrical and mechanical performance. P3 exhibits an initial charge mobility of 0.10 cm2 V⁻¹ s⁻¹ and maintained mobility of 0.0017 cm2 V⁻¹ s⁻¹ under 20% strain, significantly outperforming P1 in mobility at almost strain levels. P3 also achieved a mobility retention of 31.3% under 20% strain, compared to 12.2% for P5. This study demonstrates that the copolymerization of TIT and TVT enables the fine-tuning of solid-state packing modes and molecular orientations, thereby improving both the stretchability and environmental sustainability of the materials.

Conjugated Multiblock Copolymers and Microcracked Gold Electrodes Applied for the Intrinsically Stretchable Field-Effect Transistor

The rise of flexible electronic devices has led to extensive research into conjugated polymer structural engineering. Integrating polymer channels and contact electrodes, warranting high stretchability, is still critical, and the microcracked gold technique provides a potential strategy to integrate them. Conjugated block copolymers have gained significant attention due to their high flexibility, allowing for tailored polymer structures to meet the specific requirements of different device characteristics. In this study, novel N-type multiblock copolymers (multi-BCPs) composed of rigid poly(naphthalene diimide-alt-bithiophene) and flexible polyisobutylene segments were successfully synthesized as polymer semiconductors for the first time. The materials are named based on the weight fraction of soft segments: NDI (0 wt %), mAB73 (27 wt %), and mAB60 (40 wt %). The study explores the mechanical properties, crystallinity, and electrical performance of flexible multi-BCPs. The results show that introducing soft segments significantly enhances stretchability, with crack-onset strains beyond 100% because of their low elastic moduli of 40-50 MPa. Furthermore, the OFET device of mAB73 achieves unchanged mobility under 100% strain, outperforming mAB60 due to excessive polyisobutylene blocks. At the end of this study, an integrated stretchable device with high stretchability is fulfilled by utilizing the microcracked gold technique to combine the multi-BCP channels and contact electrodes. The integrated device can be applied to biomedical electronics without toxic or corrosive electrode materials. The influencing factors, including contact resistance, channel charge mobility, and electrode resistance, are systematically studied to investigate the integrated device's mobility-stretchability relationship. The results indicate that the contact resistance between the multi-BCP channels and contact electrodes is essential to the device's performance. Among these, mAB73, containing soft segments, exhibits more stability than NDI due to the microcracked gold electrodes with infiltrated gold nanoparticles in the rubbery channel surface. Appropriately incorporating soft segments significantly enhances mobility retention under tensile strains, highlighting the potential of multi-BCP designs in stretchable electronic applications.

Recent developments in polymer semiconductors with excellent electron transport performances

Benefiting from molecular design and device innovation, electronic devices based on polymer semiconductors have achieved significant developments and gradual commercialization over the past few decades. Most of high-performance polymer semiconductors that have been prepared exhibit p-type performances, and records of their carrier mobilities are constantly being broken through. Although ambipolar and n-type polymers are necessary for constructing p-n heterojunctions and logic circuits, only a few materials show outstanding device performances, which leads to their developments lagging far behind that of p-type analogues. As a consequence, it is extremely significant to summarize polymer semiconductors with excellent electron transport performances. This review focuses on the design considerations and bonding modes between monomers of polymer semiconductors with high electron mobilities. To enhance electron transport performances of polymer semiconductors, the structural modification strategies are described in detail. Subsequently, the electron transport, thermoelectric, mixed ionic-electronic conduction, intrinsically stretchable, photodetection, and spin transport performances of high-electron mobility polymers are discussed from the perspective of molecular engineering. In the end, the challenges and prospects in this research field are presented, which provide valuable guidance for the design of polymer semiconductors with excellent electron transport performances and the exploration of more advanced applications in the future.

Design Principles for Enhancing Both Carrier Mobility and Stretchability in Polymer Semiconductors via Lewis Acid Doping

With the rise of skin-like electronics, devices are increasingly coming into close contact with the human body, creating a demand for polymer semiconductors (PSCs) that combine stretchability with reliable electrical performance. However, balancing mechanical robustness with high carrier mobility remains a challenge. To address this, tris(pentafluorophenyl)borane (BCF) for Lewis acid doping is proposed to improve charge mobility while enhancing stretchability by increasing structural disorder. Through systematic investigation, several key structural principles have been identified to maximize the effectiveness of BCF doping in stretchable PSCs. Notably, increasing the lamellar stacking distance and reducing crystallinity facilitate the incorporation of BCF into the alkyl side-chain regions, thereby enhancing both mobility and stretchability. Conversely, stronger Lewis base groups in the main chain negatively impact these improvements. These results demonstrate that with a small addition of BCF, a two-fold increase in carrier mobility is achieved while simultaneously enhancing the crack onset strain to 100%. Furthermore, doped PSCs exhibit stable mobility retention under repeated 30% strains over 1000 cycles. This method of decoupling carrier mobility from mechanical properties opens up new avenues in the search for high-mobility stretchable PSCs.

Molecularly Designed and Nanoconfined Polymer Electronic Materials for Skin-like Electronics

Stretchable electronics have seen substantial development in skin-like mechanical properties and functionality thanks to the advancements made in intrinsically stretchable polymer electronic materials. Nanoscale phase separation of polymer materials within an elastic matrix to form one-dimensional nanostructures, namely nanoconfinement, effectively reduces conformational disorders that have long impeded charge transport properties of conjugated polymers. Nanoconfinement results in enhanced charge transport and the addition of skin-like properties. In this Outlook, we highlight the current understanding of structure-property relationships for intrinsically stretchable electronic materials with a focus on the nanoconfinement strategy as a promising approach to incorporate skin-like properties and other functionalities without compromising charge transport. We outline emerging directions and challenges for intrinsically stretchable electronic materials with the aim of constructing skin-like electronic systems.

Conjugated Polymer-Based Photo-Crosslinker for Efficient Photo-Patterning of Polymer Semiconductors

Photo-patterning of polymer semiconductors using photo-crosslinkers has shown potential for organic circuit fabrication via solution processing techniques. However, the performance of patterning, including resolution (R), UV light exposure dose, sensitivity (S), and contrast (γ), remains unsatisfactory. In this study, a novel conjugated polymer based photo-crosslinker (PN3, Figure 1a) is reported for the first time, which entails phenyl-substituted azide groups in its side chains. Due to the potential π-π interactions between the conjugated backbone of PN3 and those of polymer semiconductors, PN3 exhibits superior miscibility with polymer semiconductors compared to the commonly used small molecule photo-crosslinker 4Bx (Figure 1a). Consequently, photo-patterning of polymer semiconductors with PN3 demonstrates improved performance with much lower UV light exposure dose, higher S and higher γ compared to 4Bx. By utilizing electron beam lithography, patterned arrays of polymer semiconductors with resolutions down to 500 nm and clearer edges are successfully fabricated using PN3. Furthermore, patterned arrays of PDPP4T, the p-type semiconductor (Figure 1b), after being doped, can function as source-drain electrodes for fabricating field-effect transistors (FETs) with comparable charge mobility and significantly lower sub-threshold swing value compared to those with gold electrodes.

Molecular-Scale Geometric Design: Zigzag-Structured Intrinsically Stretchable Polymer Semiconductors

Orienting intelligence and multifunction, stretchable semiconductors are of great significance in constructing next-generation human-friendly wearable electronic devices. Nevertheless, rendering semiconducting polymers mechanical stretchability without compromising intrinsic electrical performance remains a major challenge. Combining geometry-innovated inorganic systems and structure-tailored organic semiconductors, a molecular-scale geometric design strategy is proposed to obtain high-performance intrinsically stretchable polymer semiconductors. Originating from the linear regioregular conjugated polymer and corresponding para-modified near-linear counterpart, a series of zigzag-structured semiconducting polymers are developed with diverse ortho-type and meta-type kinking units quantitatively incorporated. They showcase huge edges in realizing stretchability enhancement for conformational transition, likewise with long-range π-aggregation and short-range torsion disorder taking effect. Assisted by additional heteroatom embedment and flexible alkyl-chain attachment, mechanical stretchability and carrier mobility could afford a two-way promotion. Among zigzag-structured species, o-OC8-5% with the initial field-effect mobility up to 1.92 cm2 V-1 s-1 still delivers 1.43 and 1.37 cm2 V-1 s-1 under 100% strain with charge transport parallel and perpendicular to the stretching direction, respectively, accompanied by outstanding performance retention and cyclic stability. This molecular design strategy contributes to an in-depth exploration of prospective intrinsically stretchable semiconductors for cutting-edge electronic devices.

In situ continuous hydrogen-bonded engineering for intrinsically stretchable and healable high-mobility polymer semiconductors

As a key component for wearable electronics, intrinsically stretchable and healable semiconducting polymers are scarce because carrier mobility is often reduced with increasing stretchability and self-healability. Here, we combine stepwise polymerization and thermal conversion to introduce in situ continuous hydrogen bonding sites in a polymer backbone without breaking the conjugation or introducing bulky softer side chains, benefiting the intrachain and interchain charge transport. We demonstrate that a regular sequence structure facilitated the formation of big nanofibers with a high degree of aggregation, providing the loose and porous thin film with simultaneously improved charge transport, stretchability, and self-healability. The mobility of damaged devices can be recovered to 81% after a healing treatment. Fully stretchable transistor based on the designed polymer exhibited a greatly enhanced mobility up to 1.08 square centimeters per volt per second under 100% strain, which is an unprecedented value and constitutes a major step for the development of intrinsically stretchable and healable semiconducting polymers.

Advances in Stretchable Organic Photovoltaics: Flexible Transparent Electrodes and Deformable Active Layer Design

Stretchable organic photovoltaics (OPVs) have attracted significant attention as promising power sources for wearable electronic systems owing to their superior robustness under repetitive tensile strains and their good compatibility. However, reconciling a high power-conversion efficiency and a reasonable flexibility is a tremendous challenge. In addition, the development of stretchable OPVs must be accelerated to satisfy the increasing requirements of niche markets for mechanical robustness. Stretchable OPV devices can be classified as either structurally or intrinsically stretchable. This work reviews recent advances in stretchable OPVs, including the design of mechanically robust transparent electrodes, photovoltaic materials, and devices. Initially, an overview of the characteristics and recent research progress in the areas of structurally and intrinsically stretchable OPVs is provided. Subsequently, research into flexible and stretchable transparent electrodes that directly affect the performances of stretchable OPVs is summarized and analyzed. Overall, this review aims to provide an in-depth understanding of the intrinsic properties of highly efficient and deformable active materials, while also emphasizing advanced strategies for simultaneously improving the photovoltaic performance and mechanical flexibility of the active layer, including material design, multi-component settings, and structural optimization.

Intrinsically Stretchable Organic Thermoelectric Polymers Enabled by Incorporating Fused-Ring Conjugated Breakers

While research on organic thermoelectric polymers is making significant progress in recent years, realization of a single polymer material possessing both thermoelectric properties and stretchability for the next generation of self-powered wearable electronics is a challenging task and remains an area yet to be explored. A new molecular engineering concept of "conjugated breaker" is employed to impart stretchability to a highly crystalline diketopyrrolepyrrole (DPP)-based polymer. A hexacyclic diindenothieno[2,3-b]thiophene (DITT) unit, with two 4-octyloxyphenyl groups substituted at the tetrahedral sp3-carbon bridges, is selected to function as the conjugated breaker that can sterically hinder intermolecular packing to reduce polymers' crystallinity. A series of donor-acceptor random copolymers is thus developed via polymerizing the crystalline DPP units with the DITT conjugated breakers. By controlling the monomeric DPP/DITT ratios, DITT30 reaches the optimal balance of crystalline/amorphous regions, exhibiting an exceptional power factor (PF) value up to 12.5 µW m-1 K-2 after FeCl3-doping; while, simultaneously displaying the capability to withstand strains exceeding 100%. More significantly, the doped DITT30 film possesses excellent mechanical endurance, retaining 80% of its initial PF value after 200 cycles of stretching/releasing at a strain of 50%. This research marks a pioneering achievement in creating intrinsically stretchable polymers with exceptional thermoelectric properties.

High-Performance Semiconducting Carbon Nanotube Transistors Using Naphthalene Diimide-Based Polymers with Biaxially Extended Conjugated Side Chains

Polymer-wrapped single-walled carbon nanotubes (SWNTs) are a potential method for obtaining high-purity semiconducting (sc) SWNT solutions. Conjugated polymers (CPs) can selectively sort sc-SWNTs with different chiralities, and the structure of the polymer side chains influences this sorting capability. While extensive research has been conducted on modifying the physical, optical, and electrical properties of CPs through side-chain modifications, the impact of these modifications on the sorting efficiency of sc-SWNTs remains underexplored. This study investigates the introduction of various conjugated side chains into naphthalene diimide-based CPs to create a biaxially extended conjugation pattern. The CP with a branched conjugated side chain (P3) exhibits reduced aggregation, resulting in improved wrapping ability and the formation of larger bundles of high-purity sc-SWNTs. Grazing incidence X-ray diffraction analysis confirms that the potential interaction between sc-SWNTs and CPs occurs through π-π stacking. The field-effect transistor device fabricated with P3/sc-SWNTs demonstrates exceptional performance, with a significantly enhanced hole mobility of 4.72 cm2 V-1 s-1 and high endurance/bias stability. These findings suggest that biaxially extended side-chain modification is a promising strategy for improving the sorting efficiency and performance of sc-SWNTs by using CPs. This achievement can facilitate the development of more efficient and stable electronic devices.

Improved Mobility-Stretchability Properties of Diketopyrrolopyrrole-Based Conjugated Polymers with Diastereomeric Conjugation Break Spacers

Stretchable conjugated polymers with conjugation break spacers (CBSs) synthesized via random terpolymerization have gained considerable attention because of their efficacy in modulating mobility and stretchability. This study incorporates a series of dianhydrohexitol diastereomers of isosorbide (ISB) and isomannide (IMN) units into the diketopyrrolopyrrole-based backbone as CBSs. It is found that the distorted CBS (IMN) improves the mobility-stretchability properties of the polymer with a highly coplanar backbone, whereas the extended CBS (ISB) enhances those of the polymer with a noncoplanar backbone. Additionally, the different configurations of ISB and IMN sufficiently affect the solid-state packing, aggregation capabilities, crystallographic parameters, and mobility-stretchability properties of the polymer. The IMN-based polymers exhibit the highest mobility of 1.69 cm2 V-1 s-1 and crystallinity retentions of (85.7, 78.6)% under 20% and 60% strains, outperforming their ISB-based or unmodified counterparts. The improvement is correlated with a robust aggregation capability. Furthermore, the CBS content affects aggregation behavior, notably affecting mobility. This result indicates that incorporating CBSs into the polymer can enhance backbone flexibility via movement and rotation of the CBS without affecting the crystalline regions.

Nonhalogenated Solvent Processable and High-Density Photopatternable Polymer Semiconductors Enabled by Incorporating Hydroxyl Groups in the Side Chains

Polymer semiconductors hold tremendous potential for applications in flexible devices, which is however hindered by the fact that they are usually processed by halogenated solvents rather than environmentally more friendly solvents. An effective strategy to boost the solubility of high-performance polymer semiconductors in nonhalogenated solvents such as tetrahydrofuran (THF) by appending hydroxyl groups in the side chains is herein presented. The results show that hydroxyl groups, which can be easily incorporated into the side chains, can significantly improve the solubility of typical p- and n-types as well as ambipolar polymer semiconductors in THF. Meanwhile, the thin films of these polymer semiconductors from the respective THF solutions show high charge mobilities. With THF as the processing and developing solvents these polymer semiconductors with hydroxyl groups in the side chains can be well photopatterned in the presence of the photo-crosslinker, and the charge mobilities of the patterned thin films are mostly maintained by comparing with those of the respective pristine thin films. Notably, THF is successfully utilized as the processing and developing solvent to achieve high-density photopatterning with ≈82 000 device arrays cm-2 for polymer semiconductors in which hydroxyl groups are appended in the side chains.

Trade-off between processability and device performance in donor-acceptor semiconductors revealed using discrete siloxane side chains

Donor-acceptor polymeric semiconductors are crucial for state-of-the-art applications, such as electronic skin mimics. The processability, and thus solubility, of these polymers in benign solvents is critical and can be improved through side chain engineering. Nevertheless, the impact of novel side chains on backbone orientation and emerging device properties often remains to be elucidated. Here, we investigate the influence of elongated linear and branched discrete oligodimethylsiloxane (oDMS) side chains on solubility and device performance. Thereto, diketopyrrolopyrrole-thienothiophene polymers are equipped with various oDMS pendants (PDPPTT-Sin) and subsequently phase separated into lamellar domains. The introduction of a branching point in the siloxane significantly enhanced the solubility of the polymer, as a result of increased backbone distortion. Simultaneously, the charge carrier mobility of the polymers decreased by an order of magnitude upon functionalization with long and/or branched siloxanes. This work unveils the intricate balance between processability and device performance in organic semiconductors, which is key for the development of next-generation electronic devices.

Pre-Endcapping of Hyperbranched Polymers toward Intrinsically Stretchable Semiconductors with Good Ductility and Carrier Mobility

The advancement of semiconducting polymers stands as a pivotal milestone in the quest to realize wearable electronics. Nonetheless, endowing semiconductor polymers with stretchability without compromising their carrier mobility remains a formidable challenge. This study proposes a "pre-endcapping" strategy for synthesizing hyperbranched semiconducting polymers (HBSPs), aiming to achieve the balance between carrier mobility and stretchability for organic electronics. The findings unveil that the aggregates formed by the endcapped hyperbranched network structure not only ensure efficient charge transport but also demonstrate superior tensile resistance. In comparison to linear conjugated polymers, HBSPs exhibit substantially larger crack onset strains and notably diminished tensile moduli. It is evident that the HBSPs surpass their linear counterparts in terms of both their semiconducting and mechanical properties. Among HBSPs, HBSP-72h-2.5 stands out as the preeminent candidate within the field of inherently stretchable semiconducting polymers, maintaining 93% of its initial mobility even when subjected to 100% strain (1.41 ± 0.206 cm2 V-1 s-1). Furthermore, thin film devices of HBSP-72h-2.5 remain stable after undergoing repeated stretching and releasing cycles. Notably, the mobilities are independent of the stretching directions, showing isotropic charge transport behavior. The preliminary study makes this "pre-endcapping" strategy a potential candidate for the future design of organic materials for flexible electronic devices.

Stretchable Electronics with Strain-Resistive Performance

Stretchable electronics have attracted tremendous attention amongst academic and industrial communities due to their prospective applications in personal healthcare, human-activity monitoring, artificial skins, wearable displays, human-machine interfaces, etc. Other than mechanical robustness, stable performances under complex strains in these devices that are not for strain sensing are equally important for practical applications. Here, a comprehensive summarization of recent advances in stretchable electronics with strain-resistive performance is presented. First, detailed overviews of intrinsically strain-resistive stretchable materials, including conductors, semiconductors, and insulators, are given. Then, systematic representations of advanced structures, including helical, serpentine, meshy, wrinkled, and kirigami-based structures, for strain-resistive performance are summarized. Next, stretchable arrays and circuits with strain-resistive performance, that integrate multiple functionalities and enable complex behaviors, are introduced. This review presents a detailed overview of recent progress in stretchable electronics with strain-resistive performances and provides a guideline for the future development of stretchable electronics.

Microstructural Evolution of P(NDI2OD-T2) Films with Different Molecular Weight during Stretching Deformation

Conjugated polymers exhibit excellent electrical and mechanical properties when their molecular weight (Mw) is above the critical molecular weight (Mc). The microstructural changes of polymers under strain are crucial to establish a structure-performance relationship. Herein, the tensile deformation of P(NDI2OD-T2) is visualized, and cracks are revealed either along the (100) crystal plane of side chain packing or along the main chain direction which depends on the Mw is below or above the Mc. When Mw < Mc, the film cracks along the (100) plane under small strains. When Mw > Mc, the polymer chains first undergo stretch-induced orientation and then fracture along the main chain direction at large strains. This is attributed to the fact that the low Mw film exhibits large crystalline domains and the absence of interdomain connectivity, which are vulnerable to mechanical stress. In contrast, the high Mw film displays a nearly amorphous morphology with adequate entanglements, the molecular chains can endure stresses in the stretching direction to release substantial strain energy under greater mechanical deformation. Therefore, the film with Mw > Mc exhibits the optimal electrical and mechanical performances simultaneously, i.e., the electron mobility is retained under 100% strain and after 100 stretching-releasing cycles.

Intrinsically Stretchable and Healable Polymer Semiconductors

In recent decades, polymer semiconductors, extensively employed as charge transport layers in devices like organic field-effect transistors (OFETs), have undergone thorough investigation due to their capacity for large-area solution processing, making them promising for mass production. Research efforts have been twofold: enhancing the charge mobilities of polymer semiconductors and augmenting their mechanical properties to meet the demands of flexible devices. Significant progress has been made in both realms, propelling the practical application of polymer semiconductors in flexible electronics. However, integrating excellent semiconducting and mechanical properties into a single polymer still remains a significant challenge. This review intends to introduce the design strategies and discuss the properties of high-charge mobility stretchable conjugated polymers. In addition, another key challenge faced in this cutting-edge field is maintaining stable semiconducting performance during long-term mechanical deformations. Therefore, this review also discusses the development of healable polymer semiconductors as a promising avenue to improve the lifetime of stretchable device. In conclusion, challenges and outline future research perspectives in this interdisciplinary field are highlighted.

Aligned Conjugated Polymer Nanofiber Networks in an Elastomer Matrix for High-Performance Printed Stretchable Electronics

Conjugated polymer films are promising in wearable X-ray detection. However, achieving optimal film microstructure possessing good electrical and detection performance under large deformation via scalable printing remains challenging. Herein, we report bar-coated high-performance stretchable films based on a conjugated polymer P(TDPP-Se) and elastomer SEBS blend by optimizing the solution-processing conditions. The moderate preaggregation in solution and prolonged growth dynamics from a solvent mixture with limited dissolving capacity is critical to forming aligned P(TDPP-Se) chains/crystalline nanofibers in the SEBS phase with enhanced π-π stacking for charge transport and stress dissipation. The film shows a large elongation at break of >400% and high mobilities of 5.29 cm2 V-1 s-1 at 0% strain and 1.66 cm2 V-1 s-1 over 500 stretch-release cycles at 50% strain, enabling good X-ray imaging with a high sensitivity of 1501.52 μC Gyair-1 cm-2. Our work provides a morphology control strategy toward high-performance conjugated polymer film-based stretchable electronics.

Molecular Design of Multifunctional Integrated Polymer Semiconductors with Intrinsic Stretchability, High Mobility, and Intense Luminescence

Multifunctional semiconductors integrating unique optical, electrical, mechanical, and chemical characteristics are critical to advanced and emerging manufacturing technologies. However, due to the trade-off challenges in design principles, fabrication difficulty, defects in existing materials, etc., realizing multiple functions through multistage manufacturing is quite taxing. Here, an effective molecular design strategy is established to prepare a class of multifunctional integrated polymer semiconductors. The pyridal[1,2,3]triazole-thiophene co-structured tetrapolymers with full-backbone coplanarity and considerable inter/intramolecular noncovalent interactions facilitate short-range order and excellent (re)organization capability of polymer chains, providing stress-dissipation sites in the film state. The regioregular multicomponent conjugated backbones contribute to dense packing, excellent crystallinity, high crack onset strain over 100%, efficient carrier transport with mobilities exceeding 1 cm2  V-1  s-1 , and controllable near-infrared luminescence. Furthermore, a homologous blending strategy is proposed to further enhance the color-tunable luminescent properties of polymers while effectively retaining mechanical and electrical properties. The blended system exhibits excellent field-effect mobility (µ) and quantum yield (Φ), reaching a record Φ · µ of 0.43 cm2  V-1  s-1 . Overall, the proposed strategy facilitates a rational design of regioregular semicrystalline intrinsically stretchable polymers with high mobility and color-tunable intense luminescence, providing unique possibilities for the development of multifunctional integrated semiconductors in organic optoelectronics.

Effect of Fluorination Position on the Crystalline Structure and Stretchability of Intrinsically Stretchable Polymer Semiconductors

A clear understanding of the structure-property relationship of intrinsically stretchable polymer semiconductors (ISPSs) is essential for developing high-performance polymer-based electronics. Herein, we investigate the effect of the fluorination position on the crystalline structure, charge-carrier mobility, and stretchability of polymer semiconductors based on a benzodithiophene-co-benzotriazole configuration. Although four different polymer semiconductors showed similar field-effect mobilities for holes (μ ≈ 0.1 cm2 V-1 s-1), polymer semiconductors with nonfluorinated backbones exhibited improved thin-film stretchability confirmed with crack onset strain (εc ≈ 20%-50%) over those of fluorinated counterparts (εc ≤ 10%). The enhanced stretchability of polymer semiconductors with a nonfluorinated backbone is presumably due to the higher face-on crystallite ratio and π-π stacking distance in the out-of-plane direction than those of the other polymer semiconductors. These results provide new insights into how the thin-film stretchability of polymer semiconductors can be improved by using precise molecular tailoring without deteriorating electrical properties.

Chain-Kinked Design: Improving Stretchability of Polymer Semiconductors through Nonlinear Conjugated Linkers

The manipulation of the polymer backbone structure has a profound influence on the crystalline behavior and charge transport characteristics of polymers. These strategies are commonly employed to optimize the performance of stretchable polymer semiconductors. However, a universal method that can be applied to conjugated polymers with different donor-acceptor combinations is still lacking. In this study, we propose a universal strategy to boost the stretchability of polymers by incorporating the nonlinear conjugated linker (NCL) into the main chain. Specifically, we incorporate meta-dibromobenzene (MB), characterized by its asymmetric linkage sites, as the NCL into the backbone of diketopyrrolopyrrole-thiophene-based (DPP-based) polymers. Our research demonstrates that the introduction of MB prompts chain-kinking, thereby disrupting the linearity and central symmetry of the DPP conjugated backbone. This modification reshapes the polymer conformation, decreasing the radius of gyration and broadening the free volume, which consequently adjusts the level of crystallinity, leading to a considerable increase in the stretchability of the polymer. Importantly, this method increases stretchability without compromising mobility and exhibits broad applicability across a wide range of donor-acceptor pair polymers. Leveraging this strategy, fully stretchable transistors were fabricated using a DPP polymer that incorporates 10 mol % of MB. These transistors display a mobility of approximately 0.5 cm2 V-1 s-1 and prove remarkably durable, maintaining 90% of this mobility even after enduring 1000 cycles at 25% strain. Overall, we propose a method to systematically control the main-chain conformation, thereby enhancing the stretchability of conjugated polymers in a widely applicable manner.

Air/Liquid Interfacial Self-Assembled Intrinsically Stretchable IDT-BT Film Combining a Deliberate Transfer Adherence Strategy for Stretchable Electronics

Indacenodithiophene-benzothiadiazole (IDT-BT) has emerged as one of the most promising candidates for stretchable electronics due to its good stretchability and high mobility. Here, we present an air/liquid interface self-assembly method for the stretchable IDT-BT films and design an air-side transfer adherence strategy for improving the carrier mobility of IDT-BT. By controlling the cosolvent ratio in solution and the solvent evaporation rate, the large-scale intrinsically stretchable IDT-BT film with the diameter as high as ∼3 cm was self-assembled at the air/liquid interface. The resulting stretchable film with lightweight and good uniformity could be easily transferred to curved objects such as flexible 3 M tape, glass ball, and seashell. It is found that the transfer adherence strategy of the semiconductor film significantly affects the carrier transport. The transfer adherence from air-side can effectively decrease the number of the adsorbed water molecules at semiconductor/dielectric interface, which presents the mobility as high as 2.98 cm2 V-1 s-1. Based on the air/liquid interface self-assembled IDT-BT film, the peeling process of the film for preparation of full stretchable transistors could be eliminated. The resulting intrinsically stretchable transistor exhibits mobility higher than that of the transistor with a conventional spin-coated film. Our research provides new pathways for preparing the stretchable films and intrinsically stretchable organic field-effect transistors and shows the promising potential of the air/liquid interface self-assembly strategy for stretchable electronics.

Highly Strain-Stable Intrinsically Stretchable Olfactory Sensors for Imperceptible Health Monitoring

Intrinsically stretchable gas sensors possess outstanding advantages in seamless conformability and high-comfort wearability for real-time detection toward skin/respiration gases, making them promising candidates for health monitoring and non-invasive disease diagnosis and therapy. However, the strain-induced deformation of the sensitive semiconductor layers possibly causes the sensing signal drift, resulting in failure in achievement of the reliable gas detection. Herein, a surprising result that the stretchable organic polymers present a universal strain-insensitive gas sensing property is shown. All the stretchable polymers with different degrees of crystallinity, including indacenodithiophene-benzothiadiazole (PIDTBT), diketo-pyrrolo-pyrrole bithiophene thienothiophene (DPPT-TT) and poly[4-(4,4-dihexadecyl-4H-cyclopenta[1,2-b:5,4-b']dithiophen-2-yl)-alt-[1,2,5]thiad-iazolo [3,4-c] pyridine] (PCDTPT), show almost unchanged gas response signals in the different stretching states. This outstanding advantage enables the intrinsically stretchable devices to imperceptibly adhere on human skin and well conform to the versatile deformations such as bending, twisting, and stretching, with the highly strain-stable gas sensing property. The intrinsically stretchable PIDTBT sensor also demonstrates the excellent selectivity toward the skin-emitted trimethylamine (TMA) gas, with a theoretical limit of detection as low as 0.3 ppb. The work provides new insights into the preparation of the reliable skin-like gas sensors and highlights the potential applications in the real-time detection of skin gas and respiration gas for non-invasive medical treatment and disease diagnosis.

Regulating the Sequence Structure of Conjugated Block Copolymers Enables Large-Area Single-Component Organic Solar Cells with High Efficiency and Stability

Single-component organic solar cells (SCOSCs) based on conjugated block copolymers (CBCs) by covalently bonding a polymer donor and polymer acceptor become more and more appealing due to the formation of a favorable and stable morphology. Unfortunately, a deep understanding of the effect of the assembly behavior caused by the sequence structure of CBCs on the device performance is still missing. Herein, from the aspect of manipulating the sequence length and distribution regularity of CBCs, we synthesized a series of new CBCs, namely D18(20)-b-PYIT, D18(40)-b-PYIT and D18(60)-b-PYIT by two-pot polymerization, and D18(40)-b-PYIT(r) by traditional one-pot method. It is observed that precise manipulation of sequence length and distribution regularity of the polymer blocks fine-tunes the self-assembly of the CBCs, optimizes film morphology, improves optoelectronic properties, and reduces energy loss, leading to simultaneously improved efficiency and stability. Among these CBCs, the D18(40)-b-PYIT-based device achieves a high efficiency of 13.4 % with enhanced stability, which is an outstanding performance among SCOSCs. Importantly, the regular sequence distribution and suitable sequence length of the CBCs enable a facile film-forming process of the printed device. For the first time, the blade-coated large-area rigid/flexible SCOSCs are fabricated, delivering an impressive efficiency of 11.62 %/10.73 %, much higher than their corresponding binary devices.

Achieving High Performance Stretchable Conjugated Polymers via Donor Structure Engineering

A backbone engineering strategy is developed to tune the mechanical and electrical properties of conjugated polymer semiconductors. Four Donor-Acceptor (D-A) polymers, named PTDPPSe, PTDPPTT, PTDPPBT, and PTDPPTVT, are synthesized using selenophene (Se), thienothiophene (TT), bithiophene (BT), and thienylenevinylenethiophene (TVT) as the donors and siloxane side chain modified diketopyrrolopyrrole (DPP) as acceptor. The influences of the donor structure on the polymer energy level, film morphology, molecular stacking, carrier transport properties, and tensile properties are all examined. The films of PTDPPSe show the best stretchability with crack-onset-strain greater than 100%, but the worst electrical properties with a mobility of only 0.54 cm2  V-1  s-1 . The replacement of the Se donor with larger conjugated donors, that is, TT, BT, and TVT, significantly improves the mobility of conjugated polymers but also leads to reduced stretchability. Remarkably, PTDPPBT exhibits moderate stretchability with crack-onset-strain ≈50% and excellent electrical properties. At 50% strain, it has a mobility of 2.37 cm2 V-1  s-1 parallel to the stretched direction, which is higher than the mobility of most stretchable conjugated polymers in this stretching state.

Metal-Free Arylation of Benzothiophenes at C4 by Activation as their Benzothiophene S-Oxides

Benzothiophenes, activated by oxidation to the corresponding S-oxides, undergo C-H/C-H-type coupling with phenols to give C4 arylation products. While an electron-withdrawing group at C3 of the benzothiophene is important, the process operates without a directing group and a metal catalyst, thus rendering it compatible with sensitive functionalities-e.g. halides and formyl groups. Quantum chemical calculations suggest a formal stepwise mechanism involving heterolytic cleavage of an aryloxysulfur species to give a π-complex of the corresponding benzothiophene and a phenoxonium cation. Subsequent addition of the phenoxonium cation to the C4 position of the benzothiophene is favored over the addition to C3; Fukui functions predict that the major regioisomer is formed at the more electron-rich position between C3 and C4. Varied selective manipulation of the benzothiophene products showcase the synthetic utility of the metal-free arylation process.

Hyperbranched Polymers for Organic Semiconductors

Hyperbranched polymers (HBPs) have attracted increasing attention owing to their distinct highly branched topological structures, resulting in unique properties and wide applications in organic semiconductors (OSCs). In this Review, recent progress in functional HBPs is outlined in the field of OSCs, including organic light-emitting diodes (OLEDs), organic photovoltaics (OPVs), dye-sensitized solar cells (DSSCs), and organic field effect transistors (OFETs), among others. Prospects of HBPs-based materials in OSCs are examined. The results revealed that multi-dimensional topologies not only regulate the electron (hole) transport but also adjust the film morphology, thereby affecting the efficiency and long life of organic electronic devices. Many studies showed the usefulness of HBPs as hole transport materials but reports dealing with n-type and ambipolar materials are still lacking. In addition, the interchain covalent bond in hyperbranched polymers could mitigate the damage caused by stretching, conducive to building stable flexible stretchable devices with long-term durability and good safety under harsh environmental conditions. Overall, the flexible stretchable design may enrich the applications of HBPs in organic semiconductors and provide new ideas for guiding the future design of functional organic semiconductor materials.

Self-Doping Naphthalene Diimide Conjugated Polymers for Flexible Unipolar n-Type OTFTs

The development of high-performance organic thin-film transistor (OTFT) materials is vital for flexible electronics. Numerous OTFTs are so far reported but obtaining high-performance and reliable OTFTs simultaneously for flexible electronics is still challenging. Herein, it is reported that self-doping in conjugated polymer enables high unipolar n-type charge mobility in flexible OTFTs, as well as good operational/ambient stability and bending resistance. New naphthalene diimide (NDI)-conjugated polymers PNDI2T-NM17 and PNDI2T-NM50 with different contents of self-doping groups on their side chains are designed and synthesized. The effects of self-doping on the electronic properties of resulting flexible OTFTs are investigated. The results reveal that the flexible OTFTs based on self-doped PNDI2T-NM17 exhibit unipolar n-type charge-carrier properties and good operational/ambient stability thanks to the appropriate doping level and intermolecular interactions. The charge mobility and on/off ratio are fourfold and four orders of magnitude higher than those of undoped model polymer, respectively. Overall, the proposed self-doping strategy is useful for rationally designing OTFT materials with high semiconducting performance and reliability.

Water-soluble conjugated polymers for bioelectronic systems

Bioelectronics is an interdisciplinary field of research that aims to establish a synergy between electronics and biology. Contributing to a deeper understanding of bioelectronic processes and the built bioelectronic systems, a variety of new phenomena, mechanisms and concepts have been derived in the field of biology, medicine, energy, artificial intelligence science, etc. Organic semiconductors can promote the applications of bioelectronics in improving original performance and creating new features for organisms due to their excellent photoelectric and electrical properties. Recently, water-soluble conjugated polymers (WSCPs) have been employed as a class of ideal interface materials to regulate bioelectronic processes between biological systems and electronic systems, relying on their satisfying ionic conductivity, water-solubility, good biocompatibility and the additional mechanical and electrical properties. In this review, we summarize the prominent contributions of WSCPs in the aspect of the regulation of bioelectronic processes and highlight the latest advances in WSCPs for bioelectronic applications, involving biosynthetic systems, photosynthetic systems, biophotovoltaic systems, and bioelectronic devices. The challenges and outlooks of WSCPs in designing high-performance bioelectronic systems are also discussed.

Intrinsically Stretchable Polymer Semiconductors with Good Ductility and High Charge Mobility through Reducing the Central Symmetry of the Conjugated Backbone Units

Intrinsically stretchable polymer semiconductors are highly demanding for flexible electronics. However, it still remains challenging to achieve synergy between intrinsic stretchability and charge transport property properly for polymer semiconductors. In this paper, terpolymers are reported as intrinsically stretchable polymeric semiconductors with good ductility and high charge mobility simultaneously by incorporation of non-centrosymmetric spiro[cycloalkane-1,9'-fluorene] (spiro-fluorene) units into the backbone of diketopyrrolopyrrole (DPP) based conjugated polymers. The results reveal that these terpolymers show obviously high crack onset strains and their tensile moduli are remarkably reduced, by comparing with the parent DPP-based conjugated polymer without spiro-fluorene units. They exhibit simultaneously high charge mobilities (>1.0 cm² V^-1 s^-1 ) at 100% strain and even after repeated stretching and releasing cycles for 500 times under 50% strain. The terpolymer P2, in which cyclopropane is linked to the spiro-fluorene unit, is among the best reported intrinsically stretchable polymer semiconductors with record mobility up to 3.1 cm² V^-1 s^-1 at even 150% strain and 1.4 cm² V^-1 s^-1 after repeated stretching and releasing cycles for 1000 times.

N-Type Doping of Naphthalenediimide-Based Random Donor-Acceptor Copolymers to Enhance Transistor Performance and Structural Crystallinity

An integrated strategy of molecular design and conjugated polymer doping is proposed to improve the electronic characteristics for organic field effect transistor (OFET) applications. Here, a series of soluble naphthalene diimide (NDI)-based random donor-acceptor copolymers with selenophene π-conjugated linkers and four acceptors with different electron-withdrawing strengths (named as rNDI-N/S/NN/SS) are synthesized, characterized, and used for OFETs. N-type doping of NDI-based random copolymers using (12a,18a)-5,6,12,12a,13,18,18a,19-octahydro-5,6-dimethyl-13,18[1',2']-benzenobisbenzimidazo[1,2-b:2',1'-d]benzo[i][2.5]benzodiazocine potassium triflate adduct (DMBI-BDZC) is successfully demonstrated. The undoped rNDI-N, rNDI-NN, and rNDI-SS samples exhibit ambipolar charge transport, while rNDI-S presents only a unipolar n-type characteristic. Doping with DMBI-BDZC significantly modulates the performance of rNDI-N/S OFETs, with a 3- to 6-fold increase in electron mobility (μ_e) for 1 wt % doped device due to simultaneous trap mitigation, lower contact resistance (R_C), and activation energy (E_A), and enhanced crystallinity and edge-on orientation for charge transport. However, the doping of intrinsic pro-quinoidal rNDI-NN/SS films exhibits unchanged or even reduced device performance. These findings allow us to manipulate the energy levels by developing conjugated copolymers based on various acceptors and quinoids and to optimize the dopant-polymer semiconductor interactions and their impacts on the film morphology and molecular orientation for enhanced charge transport.

Enhancing the Performance of Electret-Free Phototransistor Memory by Using All-Conjugated Block Copolymer

Conjugated polymers are of great interest owing to their potential in stretchable electronics to function under complex deformation conditions. To improve the performance of conjugated polymers, various structural designs have been proposed and these conjugated polymers are specially applied in exotic optoelectronics. In this work, a series of all-conjugated block copolymers (PII2T-b-PNDI2T) comprising poly(isoindigo-bithiophene) (PII2T) and poly(naphthalenediimide-bithiophene) (PNDI2T) are developed with varied compositions and applied to electret-free phototransistor memory. Accordingly, these memory devices present p-type transport capability and electrical-ON/photo-OFF memory behavior. The efficacy of the all-conjugated block copolymer design in improving the memory-photoresponse properties in phototransistor memory is revealed. By optimizing the composition of the block copolymer, the corresponding device achieves a wide memory window of 36 V and a high memory ratio of 7 × 10⁴ . Collectively, the results of this study indicate a new concept for designing electret-free phototransistor memory by using all-conjugated block copolymer heterojunctions to mitigate the phase separation of conjugated polymer blends. Meanwhile, the intrinsic optoelectronic properties of the constituent conjugated polymers can be well-maintained by using an all-conjugated block copolymer design.

High n-type and p-type conductivities and power factors achieved in a single conjugated polymer

The charge transport properties of conjugated polymers are commonly limited by the energetic disorder. Recently, several amorphous conjugated polymers with planar backbone conformations and low energetic disorder have been investigated for applications in field-effect transistors and thermoelectrics. However, there is a lack of strategy to finely tune the interchain π-π contacts of these polymers that severely restricts the energetic disorder of interchain charge transport. Here, we demonstrate that it is feasible to achieve excellent conductivity and thermoelectric performance in polymers based on thiophene-fused benzodifurandione oligo(p-phenylenevinylene) through reducing the crystallization rate of side chains and, in this way, carefully controlling the degree of interchain π-π contacts. N-type (p-type) conductivities of more than 100 S cm^-1 (400 S cm^-1) and power factors of more than 200 μW m^-1 K^-2 (100 μW m^-1 K^-2) were achieved within a single polymer doped by different dopants. It further demonstrated the state-of-the-art power output of the first flexible single-polymer thermoelectric generator.

The development of stretchable and self-repairing materials applied to electronic skin

Flexible electronic devices play a key role in the fields of flexible batteries, electronic skins, and flexible displays, which have attracted more and more attention in the past few years. Among them, the application areas of electronic skin in new energy, artificial intelligence, and other high-tech applications are increasing. Semiconductors are an indispensable part of electronic skin components. The design of semiconductor structure not only needs to maintain good carrier mobility, but also considers extensibility and self-healing capability, which is always a challenging work. Though flexible electronic devices are important for our daily life, the research on this topic is quite rare in the past few years. In this work, the recently published work regarding to stretchable semiconductors as well as self-healing conductors are reviewed. In addition, the current shortcomings, future challenges as well as an outlook of this technology are discussed. The final goal is to outline a theoretical framework for the design of high-performance flexible electronic devices that can at the same time address their commercialization challenges.

A road map on synthetic strategies and applications of biodegradable polymers

Biodegradable polymers have emerged as fascinating materials due to their non-toxicity, environmentally benign nature and good mechanical strength. The toxic effects of non-biodegradable plastics paved way for the development of sustainable and biodegradable polymers. The engineering of biodegradable polymers employing various strategies like radical ring opening polymerization, enzymatic ring opening polymerization, anionic ring opening polymerization, photo-initiated radical polymerization, chemoenzymatic method, enzymatic polymerization, ring opening polymerization and coordinative ring opening polymerization have been discussed in this review. The application of biodegradable polymeric nanoparticles in the biomedical field and cosmetic industry is considered to be an emerging field of interest. However, this review mainly highlights the applications of selected biodegradable polymers like polylactic acid, poly(ε-caprolactone), polyethylene glycol, polyhydroxyalkanoates, poly(lactide-co-glycolide) and polytrimethyl carbonate in various fields like agriculture, biomedical, biosensing, food packaging, automobiles, wastewater treatment, textile and hygiene, cosmetics and electronic devices.

Recent Structural Engineering of Polymer Semiconductors Incorporating Hydrogen Bonds

Highly planar, extended π-electron organic conjugated polymers have been increasingly attractive for achieving high-mobility organic semiconductors. In addition to the conventional strategy to construct rigid backbone by covalent bonds, hydrogen bond has been employed extensively to increase the planarity and rigidity of polymer via intramolecular noncovalent interactions. This review provides a general summary of high-mobility semiconducting polymers incorporating hydrogen bonds in field-effect transistors over recent years. The structural engineering of the hydrogen bond-containing building blocks and the discussion of theoretical simulation, microstructural characterization, and device performance are covered. Additionally, the effects of the introduction of hydrogen bond on self-healing, stretchability, chemical sensitivity, and mechanical properties are also discussed. The review aims to help and inspire design of new high-mobility conjugated polymers with superiority of mechanical flexibility by incorporation of hydrogen bond for the application in flexible electronics.

Molecular Design of Stretchable Polymer Semiconductors: Current Progress and Future Directions

Stretchable polymer semiconductors have advanced rapidly in the past decade as materials required to realize conformable and soft skin-like electronics become available. Through rational molecular-level design, stretchable polymer semiconductor films are now able to retain their electrical functionalities even when subjected to repeated mechanical deformations. Furthermore, their charge-carrier mobilities are on par with the best flexible polymer semiconductors, with some even exceeding that of amorphous silicon. The key advancements are molecular-design concepts that allow multiple strain energy-dissipation mechanisms, while maintaining efficient charge-transport pathways over multiple length scales. In this perspective article, we review recent approaches to confer stretchability to polymer semiconductors while maintaining high charge carrier mobilities, with emphasis on the control of both polymer-chain dynamics and thin-film morphology. Additionally, we present molecular design considerations toward intrinsically elastic semiconductors that are needed for reliable device operation under reversible and repeated deformation. A general approach involving inducing polymer semiconductor nanoconfinement allows for incorporation of several other desired functionalities, such as biodegradability, self-healing, and photopatternability, while enhancing the charge transport. Lastly, we point out future directions, including advancing the fundamental understanding of morphology evolution and its correlation with the change of charge transport under strain, and needs for strain-resilient polymer semiconductors with high mobility retention.

Impact of Molecular Design on Degradation Lifetimes of Degradable Imine-Based Semiconducting Polymers

Transient electronics are a rapidly emerging field due to their potential applications in the environment and human health. Recently, a few studies have incorporated acid-labile imine bonds into polymer semiconductors to impart transience; however, understanding of the structure-degradation property relationships of these polymers is limited. In this study, we systematically design and characterize a series of fully degradable diketopyrrolopyrrole-based polymers with engineered sidechains to investigate the impact of several molecular design parameters on the degradation lifetimes of these polymers. By monitoring degradation kinetics via ultraviolet-visible spectroscopy, we reveal that polymer degradation in solution is aggregation-dependent based on the branching point and M_n, with accelerated degradation rates facilitated by decreasing aggregation. Additionally, increasing the hydrophilicity of the polymers promotes water diffusion and therefore acid hydrolysis of the imine bonds along the polymer backbone. The aggregation properties and degradation lifetimes of these polymers rely heavily on solvent, with polymers in chlorobenzene taking six times as long to degrade as in chloroform. We develop a new method for quantifying the degradation of polymers in the thin film and observe that similar factors and considerations (e.g., interchain order, crystallite size, and hydrophilicity) used for designing high-performance semiconductors impact the degradation of imine-based polymer semiconductors. We found that terpolymerization serves as an attractive approach for achieving degradable semiconductors with both good charge transport and tuned degradation properties. This study provides crucial principles for the molecular design of degradable semiconducting polymers, and we anticipate that these findings will expedite progress toward transient electronics with controlled lifetimes.

Insulating Polymers as Additives to Bulk-Heterojunction Organic Solar Cells: The Effect of Miscibility

Adding insulating polymers to conjugated polymers is an efficient strategy to tailor their mechanical properties for flexible organic electronics. In this work, we selected two insulating polymers as additives for high-performance photoactive layers and investigated the mechanical and photovoltaic properties in organic solar cells (OSCs). The insulating polymers were found to reduce the electron mobilities in the photoactive layers, and hence the power conversion efficiencies were significantly decreased. More importantly, we found that the insulating polymers exhibited negative effect on the mechanical properties of the photoactive layers, with reduced Young's modulus and low crack onset strains. Further studies revealed that the insulating polymers had poor miscibility with the photoactive layers, providing large domains and more cavities in blend thin films, which act as negative effect for the tensile test. The studies indicate that rational selection of insulating polymers, especially enhancing the non-covalent interaction with the photoactive layers, will be critically important for the stretchable OSCs.