Atomic Structure of Pt3Ni Nanoframe Electrocatalysts by in Situ X-ray Absorption Spectroscopy

Modification of carbon nanofibers for boosting oxygen electrocatalysis

Oxygen electrocatalysis is a key process for many effective energy conversion techniques, which requires the development of high-performance electrocatalysts. Carbon nanofibers featuring good electronic conductivity, large specific surface area, high axial strength and modulus, and good resistance toward harsh environments have thus been recognized as reinforcements in oxygen electrocatalysis. This review summarizes the recent progress on carbon nanofibers as electrocatalysts for oxygen electrocatalysis, with special focus on the modulation of carbon nanofibers for further elevating their electrocatalytic performance, which includes morphological and structural engineering, surface and pore size distribution, defect engineering, and coupling with other electroactive materials. Additionally, the correlation between the geometrical/electronic structure of their active centers and electrocatalytic activity is systematically discussed. Finally, conclusions and perspectives of this interesting research field are presented, which we hope will provide guidance for the future fabrication of more advanced carbon-fiber-based electrocatalysts.

Synthesis of PtNi Nanoparticles to Accelerate the Oxygen Reduction Reaction

We report the synthesis of core-shell Ni-Pt nanoparticles (NPs) with varying degrees of crystallographic facets and surface layers rich in Pt via a seed-mediated thermolytic approach. Mixtures of different surfactants used during synthesis resulted in preferential surface passivation, which in turn dictated the size, chemical composition, and geometric evolution of these PtNi NPs. Electrochemical investigations of these pristine core-shell Ni-Pt structures in the oxygen reduction reaction (ORR) show that their catalytic functionalities outperform the commercial Pt/C reference catalyst. The enhanced electrocatalytic ORR performances of these Pt-based PtNi NPs are correlated with the weakened oxygen binding strength or surface-adsorbed hydroxyl (OH) species on active Pt surface sites induced by the downshift of the d-band center as a result of compressive strain effects. Our studies offer a robust synthetic approach for the development of core-shell nanostructures for enhanced ORR catalysis.

Engineering improved strategies for spinel cathodes in high-performing zinc-ion batteries

The development of high-performing cathode materials for aqueous zinc-ion batteries (ZIBs) is highly important for the future large-scale energy storage. Owing to the distinctive framework structure, diversity of valences, and high electrochemical activity, spinel materials have been widely investigated and used for aqueous ZIBs. However, the stubborn issues of low electrical conductivity and sluggish kinetics plague their smooth applications in aqueous ZIBs, which stimulates the development of effective strategies to address these issues. This review highlights the recent advances of spinel-based cathode materials that include the configuration of aqueous ZIBs and corresponding reaction mechanisms. Subsequently, the classifications of spinel materials and their properties are also discussed. Then, the review mainly summarizes the effective strategies for elevating their electrochemical performance, including their morphology and structure design, defect engineering, heteroatom doping, and coupling with a conductive support. In the final section, several sound prospects in this fervent field are also proposed for future research and applications.

Long-Range SECCM Enables High-Throughput Electrochemical Screening of High Entropy Alloy Electrocatalysts at Up-To-Industrial Current Densities

High-entropy alloys (HEAs), especially in the form of compositional complex solid solutions (CCSS), have gained attention in the field of electrocatalysis. However, exploring their vast composition space concerning their electrocatalytic properties imposes significant challenges. Scanning electrochemical cell microscopy (SECCM) offers high-speed electrochemical analysis on surface areas with a lateral resolution down to tens of nm. However, high-precision piezo positioners often used for the motion of the tip limit the area of SECCM scans to the motion range of the piezo positioners which is typically a few tens of microns. To bridge this experimental gap, the study proposes a long-range SECCM system with a rapid gas-exchange environmental cell for high-throughput electrochemical characterization of 100 mm diameter HEA thin-film material libraries (ML) obtained by combinatorial co-sputtering. Due to the gas-liquid interface at the positioned SECCM droplet on the sample, high-throughput evaluation under industrial current density conditions becomes feasible. This allows the direct correlation between electrocatalytic activity and material composition with high statistical reliability. The multidimensional data obtained accelerates materials discovery, development, and optimization.

Rhombic dodecahedron nanoframes of PtIrCu with high-index faceted hyperbranched nanodendrites for efficient electrochemical ammonia oxidation via preferred NHx dimerization pathways

Ammonia has been emerging as a sustainable and environmentally friendly fuel. However, direct electrochemical ammonia oxidation reaction (AOR) in low-temperature fuel cells seriously suffers from high overpotential and deficient durability. Herein, rhombic dodecahedron nanoframe of platinum iridium copper (PtIrCu) with high-index faceted hyperbranched nanodendrites (RDNF-HNDs) was developed using a one-step self-etching solvothermal method. The framework structure with the high-index facets enables the PtIrCu nanocrystals to expose more effective active sites. They exhibit an ultra-low onset potential of 0.33 V vs. RHE and high mass activity of 26.1 A gPtIr-1 at 0.50 V, which is 140 mV lower and 7.5 times higher than that of commercial Pt/C in the AOR. In situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy verifies that AOR on PtIrCu RDNF-HNDs prefers to the NHx dimerization pathways, effectively alleviating the poison of Nads and NOx. The theoretical calculation also shows that both introducing Cu atoms into PtIr alloy and increasing the content of Ir in PtIrCu alloy can reduce the reaction energy barrier of electrochemical dehydrogenation from *NH2 to *NH. The specific structure of PtIrCu RDNF-NDs provides a new inspiration to solve the critical issue of electrocatalysts for AOR with low activity and durability.

Intermetallic Nanocrystals for Fuel-Cells-Based Electrocatalysis

Electrocatalysis underpins the renewable electrochemical conversions for sustainability, which further replies on metallic nanocrystals as vital electrocatalysts. Intermetallic nanocrystals have been known to show distinct properties compared to their disordered counterparts, and been long explored for functional improvements. Tremendous progresses have been made in the past few years, with notable trend of more precise engineering down to an atomic level and the investigation transferring into more practical membrane electrode assembly (MEA), which motivates this timely review. After addressing the basic thermodynamic and kinetic fundamentals, we discuss classic and latest synthetic strategies that enable not only the formation of intermetallic phase but also the rational control of other catalysis-determinant structural parameters, such as size and morphology. We also demonstrate the emerging intermetallic nanomaterials for potentially further advancement in energy electrocatalysis. Then, we discuss the state-of-the-art characterizations and representative intermetallic electrocatalysts with emphasis on oxygen reduction reaction evaluated in a MEA setup. We summarize this review by laying out existing challenges and offering perspective on future research directions toward practicing intermetallic electrocatalysts for energy conversions.

Nanostructure engineering of Pt/Pd-based oxygen reduction reaction electrocatalysts

Increasing the atomic utilization of Pt and Pd elements is the key to the advancement and broad dissemination of fuel cells. Central to this task is the design and fabrication of highly active and stable Pt- or Pd-based electrocatalysts for the oxygen reduction reaction (ORR), which requires a comprehensive understanding of the ORR pathways and mechanism. Past endeavors have accumulated a wealth of knowledge about the Pt/Pd-based ORR electrocatalysts based on structure engineering, while a systematic review of the nanostructure engineering of Pt/Pd-based ORR electrocatalysts has been rarely reported. In this review, we provide a systematic discussion about the current status of Pt/Pd-based ORR electrocatalysts from the perspective of nanostructure engineering, and we highlight the ORR pathways, mechanisms and theories in order to understand the ORR in a more complex nanocatalyst. Particularly, the underlying structure-function relationship of Pt/Pd-based ORR electrocatalysts is specifically highlighted, which will guide the future synthesis of more efficient ORR electrocatalysts.

Catalyst Development for High-Temperature Polymer Electrolyte Membrane Fuel Cell (HT-PEMFC) Applications

A constant increase in global emission standard is causing fuel cell (FC) technology to gain importance. Over the last two decades, a great deal of research has been focused on developing more active catalysts to boost the performance of high-temperature polymer electrolyte membrane fuel cells (HT-PEMFC), as well as their durability. Due to material degradation at high-temperature conditions, catalyst design becomes challenging. Two main approaches are suggested: (i) alloying platinum (Pt) with low-cost transition metals to reduce Pt usage, and (ii) developing novel catalyst support that anchor metal particles more efficiently while inhibiting corrosion phenomena. In this comprehensive review, the most recent platinum group metal (PGM) and platinum group metal free (PGM-free) catalyst development is detailed, as well as the development of alternative carbon (C) supports for HT-PEMFCs.

Catalysis of Alloys: Classification, Principles, and Design for a Variety of Materials and Reactions

Alloying has long been used as a promising methodology to improve the catalytic performance of metallic materials. In recent years, the field of alloy catalysis has made remarkable progress with the emergence of a variety of novel alloy materials and their functions. Therefore, a comprehensive disciplinary framework for catalytic chemistry of alloys that provides a cross-sectional understanding of the broad research field is in high demand. In this review, we provide a comprehensive classification of various alloy materials based on metallurgy, thermodynamics, and inorganic chemistry and summarize the roles of alloying in catalysis and its principles with a brief introduction of the historical background of this research field. Furthermore, we explain how each type of alloy can be used as a catalyst material and how to design a functional catalyst for the target reaction by introducing representative case studies. This review includes two approaches, namely, from materials and reactions, to provide a better understanding of the catalytic chemistry of alloys. Our review offers a perspective on this research field and can be used encyclopedically according to the readers' individual interests.

Atomic-Scale Structure Dynamics of Nanocrystals Revealed By In Situ and Environmental Transmission Electron Microscopy

Nanocrystals are of great importance in material sciences and industry. Engineering nanocrystals with desired structures and properties is no doubt one of the most important challenges in the field, which requires deep insight into atomic-scale dynamics of nanocrystals during the process. The rapid developments of in situ transmission electron microscopy (TEM), especially environmental TEM, reveal insights into nanocrystals to digest. According to the considerable progress based on in situ electron microscopy, a comprehensive review on nanocrystal dynamics from three aspects: nucleation and growth, structure evolution, and dynamics in reaction conditions are given. In the nucleation and growth part, existing nucleation theories and growth pathways are organized based on liquid and gas-solid phases. In the structure evolution part, the focus is on in-depth mechanistic understanding of the evolution, including defects, phase, and disorder/order transitions. In the part of dynamics in reaction conditions, solid-solid and gas-solid interfaces of nanocrystals in atmosphere are discussed and the structure-property relationship is correlated. Even though impressive progress is made, additional efforts are required to develop the integrated and operando TEM methodologies for unveiling nanocrystal dynamics with high spatial, energy, and temporal resolutions.

Direct Visualization of the Evolution of a Single-Atomic Cobalt Catalyst from Melting Nanoparticles with Carbon Dissolution

Transition metal single-atom catalysts (SACs) are of immense interest, but how exactly they are evolved upon pyrolysis of the corresponding precursors remains unclear as transition metal ions in the complex precursor undergo a series of morphological changes accompanied with changes in oxidation state as a result of the interactions with the carbon support. Herein, the authors record the complete evolution process of Co SAC during the pyrolysis a Co/Zn-containing zeolitic imidazolate framework. Aberration-corrected environmental TEM coupled with in-situ EELS is used for direct visualization of the evolution process at 200-1000 °C. Dissolution of carbon into the nanoparticles of Co is found to be key to modulating the wetting behavior of nanoparticles on the carbon support; melting of Co nanoparticles and their motion within the zeolitic architecture leads to the etching of the framework structure, yielding porous C/N support onto which Co-single atoms reside. This uniquely structured Co SAC is found to be effective for the oxidation of a series of aromatic alkanes to produce selective ketones among other possible products. The carbon dissolution and melting/sublimation-driven structural dynamics of transition metal revealed here will expand the methodology in synthesizing SACs and other high-temperature processes.

Architecture Evolution of Different Nanoparticles Types: Relationship between the Structure and Functional Properties of Catalysts for PEMFC

This review considers the features of the catalysts with different nanoparticle structures architecture transformation under the various pre-treatment types. Based on the results of the publications analysis, it can be concluded that the chemical or electrochemical activation of bimetallic catalysts has a significant effect on their composition, microstructure, and catalytic activity in the oxygen reduction reaction. The stage of electrochemical activation is recommended for use as a mandatory catalyst pre-treatment to obtain highly active de-alloyed materials. The literature is studied, which covers possible variants of the structural modification under the influence of thermal treatment under different processing conditions. Additionally, based on the literature data analysis, recommendations are given for the thermal treatment of catalysts alloyed with various d-metals.

Geometric Engineering of Porous PtCu Nanotubes with Ultrahigh Methanol Oxidation and Oxygen Reduction Capability

Platinum (Pt), as a commonly used electrocatalyst in direct methanol fuel cells (DMFCs), suffers from sluggish kinetics of both the methanol oxidation reaction (MOR) and oxygen reduction reaction (ORR). Geometric engineering has been proven effective for improving the MOR and ORR activities. Thus, by modulating the Pt precursor and poly(vinylpyrrolidone) (PVP) dosages, different porous PtCu nanotubes constructed by hollow nanospheres, solid alloy, and Pt-rich skinned nanoparticles, respectively, are successfully synthesized. Among them, the solid PtCu alloy nanoparticle coherent nanotubes exhibit the specific activity 9.42 times higher than Pt/C toward MOR, while the hollow PtCu alloy nanosphere coherent nanotubes show the specific activity 4.85 times higher than Pt/C toward ORR. The different Pt:Cu ratios of hollow nanospheres, solid alloy, and Pt-rich skinned nanoparticles cause the differences in electron transfer from Cu to Pt as well as electronic structures of Pt. As a result, the binding energies of intermediates can be regulated, leading to the enhancement in MOR and ORR.

Concave Pt-Zn Nanocubes with High-Index Faceted Pt Skin as Highly Efficient Oxygen Reduction Catalyst

High dosage of expensive Pt to catalyze the sluggish oxygen reduction reaction (ORR) on the cathode severely impedes the commercialization of proton exchange membrane fuel cells. Therefore, it is urgent to cut down the Pt catalyst by efficiently improving the ORR activity while maintaining high durability. Herein, magic concave Pt-Zn nanocubes with high-index faceted Pt skin (Pt₇₈ Zn₂₂ ) are proposed for high-efficiency catalysis toward proton exchange membrane fuel cells. These unique structural features endow the Pt-skin Pt₇₈ Zn₂₂ /KB with a mass activity of 1.18 mA μg_Pt ^-1 and a specific activity of 3.64 mA cm^-2 for the ORR at 0.9 V (vs RHE). Meanwhile, the H₂ -O₂ fuel cell assembled by this catalyst delivers an ultrahigh peak power density of ≈1449 mW cm^-2 . Both experiments and theoretical calculations show that the electronic structure of the surface is adjusted, thereby shortening the length of the Pt-Pt bond and reducing the adsorption energy of OH*/O* on the Pt surface. This work demonstrates the synergistic effect of the oxidation-resistant metal Zn and the construction of Pt-rich surface engineering. Also, it guides the future development of catalysts for their practical applications in energy conversion technologies and beyond.

Epitaxial Growth of Ultrathin Highly Crystalline Pt-Ni Nanostructure on a Metal Carbide Template for Efficient Oxygen Reduction Reaction

Structure engineering strategies such as core-shell and hollow nanostructures are effective pathways to improve the utilization of noble metals for catalysis. However, nowadays materials design based on these strategies still largely rely on precious metal templates. Herein, the epitaxial growth of highly crystalline Pt₃ Ni overlayer on earth-abundant nickel carbide is reported, forming Ni₃ C@Pt₃ Ni core-shell nanoparticles with a well-defined interface through a new lattice-match-directed synthetic strategy. Derived from such core-shell nanostructures, ultrathin highly crystalline Pt₃ Ni nanocages have an advantageous configuration of oxygen reduction reaction (ORR)-favored facets and inherently high active surface area for the ORR, bringing high mass activity and specific activity as much as 4.71 A mg_Pt ^-1 and 5.14 mA cm^-2 , which are 26 and 20 times to that of commercial Pt/C, respectively. This novel epitaxial growth of platinum opens up new avenues to rationally design highly active and economical electrocatalysts.

Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst-support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies.

The CO Tolerance of Pt/C and Pt-Ru/C Electrocatalysts in a High-Temperature Electrochemical Cell Used for Hydrogen Separation

This paper describes an experimental evaluation and comparison of Pt/C and Pt-Ru/C electrocatalysts for high-temperature (100–160 °C) electrochemical hydrogen separators, for the purpose of mitigating CO poisoning. The performances of both Pt/C and Pt-Ru/C (Pt:Ru atomic ratio 1:1) were investigated and compared under pure hydrogen and a H₂/CO gas mixture at various temperatures. The electrochemically active surface area (ECSA), determined from cyclic voltammetry, was used as the basis for a method to evaluate the performances of the two catalysts. Both CO stripping and the underpotential deposition of hydrogen were used to evaluate the electrochemical surface area. When the H₂/CO gas mixture was used, there was a complex overlap of mechanisms, and therefore CO peak could not be used to evaluate the ECSA. Hence, the hydrogen peaks that resulted after the CO was removed from the Pt surface were used to evaluate the active surface area instead of the CO peaks. Results revealed that Pt-Ru/C was more tolerant to CO, since the overlapping reaction mechanism between H₂ and CO was suppressed when Ru was introduced to the catalyst. SEM images of the catalysts before and after heat treatment indicated that particle agglomeration occurs upon exposure to high temperatures (>100 °C)

In Situ X-Ray Techniques for Electrochemical Interfaces

This article reviews progress in the study of materials using X-ray-based techniques from an electrochemistry perspective. We focus on in situ/in operando surface X-ray scattering, X-ray absorption spectroscopy, and the combination of both methods. The background of these techniques together with key concepts is introduced. Key examples of in situ and in operando investigation of liquid-solid and liquid-liquid interfaces are presented. X-ray scattering and spectroscopy have helped to develop an understanding of the underlying atomic and molecular processes associated with electrocatalysis, electrodeposition, and battery materials. We highlight recent developments, including resonant surface diffraction and time-resolved studies.

Bimetallic Nanocrystals: Structure, Controllable Synthesis and Applications in Catalysis, Energy and Sensing

In recent years, bimetallic nanocrystals have attracted great interest from many researchers. Bimetallic nanocrystals are expected to exhibit improved physical and chemical properties due to the synergistic effect between the two metals, not just a combination of two monometallic properties. More importantly, the properties of bimetallic nanocrystals are significantly affected by their morphology, structure, and atomic arrangement. Reasonable regulation of these parameters of nanocrystals can effectively control their properties and enhance their practicality in a given application. This review summarizes some recent research progress in the controlled synthesis of shape, composition and structure, as well as some important applications of bimetallic nanocrystals. We first give a brief introduction to the development of bimetals, followed by the architectural diversity of bimetallic nanocrystals. The most commonly used and typical synthesis methods are also summarized, and the possible morphologies under different conditions are also discussed. Finally, we discuss the composition-dependent and shape-dependent properties of bimetals in terms of highlighting applications such as catalysis, energy conversion, gas sensing and bio-detection applications.

Multimodal cell with simultaneous electrochemical quartz crystal microbalance and in operando spectroscopic ellipsometry to understand thin film electrochemistry

To inform the development of advanced electrodes for energy storage, water treatment, and catalysis, among other applications, we need to improve our understanding of how material structure evolves during electrochemical operation. Insight into the evolution of local atomic structure during electrochemical operation is accessible through a range of sophisticated in operando probes, but techniques for in operando observation of macroscale electrode phenomena (e.g., swelling, dissolution, and chemical degradation) are limited. This macroscale understanding is critical to establish a full picture of electrochemical material behavior. Here, we report a multimodal cell for simultaneous electrochemical quartz crystal microbalance (EQCM) and in operando spectroscopic ellipsometry (SE). This SE-EQCM cell allows for the measurement of mass, thickness, optical properties, and electrochemical properties together in one device. Using polyaniline (PANI) as a test case, we demonstrate the use of this SE-EQCM cell to rapidly measure known phenomena and reproduce a range of prior results during the electrodeposition, electrochemical cycling, and electrochemical degradation of PANI. In particular, the simultaneous mass and thickness measurement afforded by this cell allows us to distinguish known qualitative differences in the degradation of PANI under oxidative and reductive potentials. The SE-EQCM cell we report promises to reveal new insights into the electrochemical behavior of thin film materials for a range of applications.

Reconciling structure prediction of alloyed, ultrathin nanowires with spectroscopy

A number of complementary, synergistic advances are reported herein. First, we describe the 'first-time' synthesis of ultrathin Ru2Co1 nanowires (NWs) possessing average diameters of 2.3 ± 0.5 nm using a modified surfactant-mediated protocol. Second, we utilize a combination of quantitative EDS, EDS mapping (along with accompanying line-scan profiles), and EXAFS spectroscopy results to probe the local atomic structure of not only novel Ru2Co1 NWs but also 'control' samples of analogous ultrathin Ru1Pt1, Au1Ag1, Pd1Pt1, and Pd1Pt9 NWs. We demonstrate that ultrathin NWs possess an atomic-level geometry that is fundamentally dependent upon their intrinsic chemical composition. In the case of the PdPt NW series, EDS mapping data are consistent with the formation of a homogeneous alloy, a finding further corroborated by EXAFS analysis. By contrast, EXAFS analysis results for both Ru1Pt1 and Ru2Co1 imply the generation of homophilic structures in which there is a strong tendency for the clustering of 'like' atoms; associated EDS results for Ru1Pt1 convey the same conclusion, namely the production of a heterogeneous structure. Conversely, EDS mapping data for Ru2Co1 suggests a uniform distribution of both elements. In the singular case of Au1Ag1, EDS mapping results are suggestive of a homogeneous alloy, whereas EXAFS analysis pointed to Ag segregation at the surface and an Au-rich core, within the context of a core-shell structure. These cumulative outcomes indicate that only a combined consideration of both EDS and EXAFS results can provide for an accurate representation of the local atomic structure of ultrathin NW motifs.

Hyperbranched concave octahedron of PtIrCu nanocrystals with high-index facets for efficiently electrochemical ammonia oxidation reaction

Ammonia oxidation reaction (AOR) via electrocatalysis is one of the most efficient ways of utilizing ammonia (a zero-carbon fuel with high hydrogen content) for renewable energy systems. However, AOR seriously suffers from the slow kinetics, and low durability due to its multi-electron transfer process and the poison of the reaction intermediates (N_ads and NO_ads) to precious metal catalysts. Herein, hyperbranched concave octahedral nanodendrites of PtIrCu (HCOND) with high-index facets of {553}, {331} and {221} were developed for the first time using a solvothermal method. The HCOND possesses PtIr-rich edges and exhibit highly efficient AOR activity and stability in alkaline media, wherein their onset potential is 0.35 V vs.RHE, which is 60 mV and 160 mV lower than that of the PtIrCu nanoparticles (NPs) (0.41 V) and commercial Pt/C (0.51 V), respectively, and its high mass activity of 40.6 A g_PtIr^-1 at the 0.5 V vs.RHE is 10.3 times, 2.34 times higher than that of commercial Pt/C (3.9 A g_Pt^-1) and PtIrCu NPs (17.3 A g_PtIr^-1), respectively. In addition, its peak current density (122.9 A g_PtIr^-1) is only reduced by 17.7% after 2000-cycles accelerated durability test. Meanwhile, the performance of PtIrCu HCOND is also better than that of other previously reported morphologies of Pt based catalysts (eg. nanoparticles, nanocubes, nanofilm, nanoflowers). The improvement is critically ascribed to unique advantages of the specific HCOND structure including PtIr rich surface, high-index faceted nanodendrites, strong lattice strain and electronic effects. These characteristics endow the HCOND with great promise to reduce Pt and Ir loading dramatically in the practical application of direct ammonia fuel cells.

In Search of Excellence: Convex versus Concave Noble Metal Nanostructures for Electrocatalytic Applications

Controlling the shape of noble metal nanoparticles is a challenging but important task in electrocatalysis. Apart from hollow and nanocage structures, concave noble metal nanoparticles are considered a new class of unconventional electrocatalysts that exhibit superior electrocatalytic properties as compared with those of conventional nanoparticles (including convex and flat ones). Herein, several facile and highly reproducible routes for synthesizing nanostructured concave noble metal materials reported in the literature are discussed, together with their advantages over noble metal nanoparticles with convex shapes. In addition, possible ways of optimizing the synthesis procedure and enhancing the electrocatalytic characteristics of concave metal nanoparticles are suggested. Nanostructured noble metals with concave features are found to show better catalytic activity and stability hence improve their practical applicability in electrocatalysis.

Coordinately unsaturated O2c–Ti5c–O2c sites promote the reactivity of Pt/TiO2 catalysts in the solvent-free oxidation of n-octanol

Coordination unsaturated O_2c–Ti_5c–O_2c of TiO₂ (001) facets promote the formation of low-coordinate Pt metal clusters, which enhances catalytic performance in aerobic 1-octanol oxidation.

Ultrasmall PdPtCo trimetallic nanorings with enriched low-coordinated edge sites and optimized compositions for effective oxygen reduction electrocatalysis

Ultrasmall two-dimensional Pd₅₅Pt₁₈Co₂₇ trimetallic alloy nanorings with enriched low-coordinated edge sites exhibit greatly enhanced ORR electrocatalytic activity.

Scalable neutral H2O2 electrosynthesis by platinum diphosphide nanocrystals by regulating oxygen reduction reaction pathways

Despite progress in small scale electrocatalytic production of hydrogen peroxide (H2O2) using a rotating ring-disk electrode, further work is needed to develop a non-toxic, selective, and stable O2-to-H2O2 electrocatalyst for realizing continuous on-site production of neutral hydrogen peroxide. We report ultrasmall and monodisperse colloidal PtP2 nanocrystals that achieve H2O2 production at near zero-overpotential with near unity H2O2 selectivity at 0.27 V vs. RHE. Density functional theory calculations indicate that P promotes hydrogenation of OOH* to H2O2 by weakening the Pt-OOH* bond and suppressing the dissociative OOH* to O* pathway. Atomic layer deposition of Al2O3 prevents NC aggregation and enables application in a polymer electrolyte membrane fuel cell (PEMFC) with a maximum r(H2O2) of 2.26 mmol h-1 cm-2 and a current efficiency of 78.8% even at a high current density of 150 mA cm-2. Catalyst stability enables an accumulated neutral H2O2 concentration in 600 mL of 3.0 wt% (pH = 6.6).

Topographical and compositional engineering of core-shell Ni@Pt ORR electro-catalysts

Complex faceted geometries and compositional anisotropy in alloy nanoparticles (NPs) can enhance catalytic performance. We report on the preparation of binary PtNi NPs via a co-thermolytic approach in which we optimize the synthesis variables, which results in significantly improved catalytic performance. We used scanning transmission electron microscopy to characterise the range of morphologies produced, which included spherical and concave cuboidal core–shell structures. Electrocatalytic activity was evaluated using a rotating disc electrode (1600 rpm) in 0.1 M HClO₄; the electrocatalytic performance of these Ni@Pt NPs showed significant (∼11-fold) improvement compared to a commercial Pt/C catalyst. Extended cycling revealed that electrochemical surface area was retained by cuboidal PtNi NPs post 5000 electrochemical cycles (0.05–1.00 V, vs. SHE). This is attributed to the enclosure of Ni atoms by a thick Pt shell, thus limiting Ni dissolution from the alloy structures. The novel synthetic strategy presented here results in a high yield of Ni@Pt NPs which show excellent electro-catalytic activity and useful durability.

Complex faceted geometries and compositional anisotropy in alloy nanoparticles (NPs) can enhance catalytic performance.

Catalytic Nanoframes and Beyond

The ever-increasing need for the production and expenditure of sustainable energy is a result of the astonishing rate of consumption of fossil fuels and the accompanying environmental problems. Emphasis is being directed to the generation of sustainable energy by the fuel cell and water splitting technologies. Accordingly, the development of highly efficient electrocatalysts has attracted significant interest, as the fuel cell and water splitting technologies are critically dependent on their performance. Among numerous catalyst designs under investigation, nanoframe catalysts have an intrinsically large surface area per volume and a tunable composition, which impacts the number of catalytically active sites and their intrinsic catalytic activity, respectively. Nevertheless, the structural integrity of the nanoframe during electrochemical operation is an ongoing concern. Some significant advances in the field of nanoframe catalysts have been recently accomplished, specifically geared to resolving the catalytic stability concerns and significantly boosting the intrinsic catalytic activity of the active sites. Herein, general synthetic concepts of nanoframe structures and their structure-dependent catalytic performance are summarized, along with recent notable advances in this field. A discussion on the remaining challenges and future directions, addressing the limitations of nanoframe catalysts, are also provided.

Unveiling One-Pot Template-Free Fabrication of Exquisite Multidimensional PtNi Multicube Nanoarchitectonics for the Efficient Electrochemical Oxidation of Ethanol and Methanol with a Great Tolerance for CO

Multidimensional bimetallic Pt-based nanoarchitectonics are highly promising in electrochemical energy conversion technologies because of their fancy structural merits and accessible active sites; however, hitherto their precise template-free fabrication remains a great challenge. We report a template-free solvothermal one-pot approach for the rational design of cocentric PtNi multicube nanoarchitectonics via adjusting the oleylamine/oleic acid ratio with curcumin. The obtained multidimensional PtNi multicubes comprise multiple small interlace-stacked nanocube subunits assembled in spatially porous branched nanoarchitectonics and bound by high-index facets. The synthetic mechanism is driven by spontaneous isolation among prompt nucleation and oriented attachment epitaxial growth. These inimitable architectural and compositional merits of PtNi multicubes endowed the ethanol oxidation mass and specific activity by 5.6 and 9.03 times than the Pt/C catalyst, respectively, along with the enhancement of methanol oxidation mass activity by 2.3 times. Moreover, PtNi multicubes showed superior durability and a higher tolerance for CO poisoning than the Pt/C catalyst. This work may pave the way for tailored preparation of Pt-based nanoarchitectonics for myriad catalytic reactions.

A Single-Atom Manipulation Approach for Synthesis of Atomically Mixed Nanoalloys as Efficient Catalysts

Synthesis of well-defined atomically mixed alloy nanoparticles on desired substrates is an ultimate goal for their practical application. Herein we report a general approach for preparing atomically mixed AuPt, AuPd, PtPd, AuPtPd NAs(nanoalloys) through single-atom level manipulation. By utilizing the ubiquitous tendency of aggregation of single atoms into nanoparticles at elevated temperatures, we have synthesized nanoalloys on a solid solvent with CeO₂ as a carrier and transition-metal single atoms as an intermediate state. The supported nanoalloys/CeO₂ with ultra-low noble metal content (containing 0.2 wt % Au and 0.2 wt % Pt) exhibit enhanced catalytic performance towards complete CO oxidation at room temperature and remarkable thermostability. This work provides a general strategy for facile and rapid synthesis of well-defined atomically mixed nanoalloys that can be applied for a range of emerging techniques.

Controllable P Doping of the LaCoO3 Catalyst for Efficient Propane Oxidation: Optimized Surface Co Distribution and Enhanced Oxygen Vacancies

The properties of LaCoO₃ are modified by a controllable P doping strategy via a simple sol-gel route. It is demonstrated that appropriate P doping is beneficial for forming a relatively pure perovskite phase and hinders the growth of perovskite nanoparticles. The combined results of density functional theory (DFT), extended X-ray absorption fine structure (EXAFS), X-ray absorption near-edge structure (XANES), temperature-programmed reduction of hydrogen (H₂-TPR), X-ray photoelectron spectroscopy (XPS), and temperature-programmed desorption of ammonia (NH₃-TPD) reveal that appropriate P doping gives rise to more oxygen vacancies, optimized distribution of Co ions, and improved surface acidity, which are beneficial for the adsorption of active oxygen species and the activation of propane molecules, resulting in an excellent catalytic oxidation performance. Especially, LaCo_0.97P_0.03O₃ exhibits more surface-active oxygen species, higher bulk Co³⁺ proportion, increased surface Co²⁺ species, and increased acidity, resulting in its superior propane oxidation performance, which is dominated by the Langmuir-Hinshelwood mechanism. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) confirms that the presence of P will accelerate oxygen mobility, which in turn promotes the oxidation rate. Moreover, the obtained LaCo_0.97P_0.03O₃ catalyst displays excellent thermal stability during the 60 h durability test at 400 °C and strong resistance against 5 vol % H₂O and/or 5 vol % CO₂ for prolonged 150 h.

Engineering bunched Pt-Ni alloy nanocages for efficient oxygen reduction in practical fuel cells

Development of efficient and robust electrocatalysts is critical for practical fuel cells. We report one-dimensional bunched platinum-nickel (Pt-Ni) alloy nanocages with a Pt-skin structure for the oxygen reduction reaction that display high mass activity (3.52 amperes per milligram platinum) and specific activity (5.16 milliamperes per square centimeter platinum), or nearly 17 and 14 times higher as compared with a commercial platinum on carbon (Pt/C) catalyst. The catalyst exhibits high stability with negligible activity decay after 50,000 cycles. Both the experimental results and theoretical calculations reveal the existence of fewer strongly bonded platinum-oxygen (Pt-O) sites induced by the strain and ligand effects. Moreover, the fuel cell assembled by this catalyst delivers a current density of 1.5 amperes per square centimeter at 0.6 volts and can operate steadily for at least 180 hours.

Nature-inspired electrocatalysts and devices for energy conversion

A NICE approach for the design of nature-inspired electrocatalysts and electrochemical devices for energy conversion.