Hybridization of Local Exciton and Charge-Transfer States Reduces Nonradiative Voltage Losses in Organic Solar Cells

Enhanced Charge and Energy Transfer in All-Small-Molecule Ternary Organic Solar Cells: Transient Photocurrent and Photovoltage and Transient Photoluminescence Measurements

A donor-acceptor-donor (D-A-D) molecule, denoted as RC18, consisting of two nickel-porphyrin terminal donor units (D) and a selenophene-flanked diketopyrrolopyrrole central core, connected via an ethynylene linker has been synthesized. The highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels were measured showing values of -5.49 eV and -3.75 eV, respectively. We have utilized RC18 as donor along with two acceptors, DICTF and Y6, for OSCs and found that power conversion efficiencies were 12.10 % and 12.59 % for RC18:DICTF and RC18:Y6, respectively. The complementary absorption profiles of RC18, DICTF and Y6, along with the intermediate LUMO level of DICTF between RC18 and Y6, led to the fabrication of ternary organic solar cells. RC18:DICTF:Y6 based ternary attained power conversion efficiency of 16.06 %. The observed enhancement in the PCE is attributed to efficient exciton utilization through energy transfer from DICTF to Y6, increased donor-acceptor interfacial area, suppressed charge carrier recombination and improved molecular ordering. These all factors contribute to improvements in short-circuit current density (JSC) and fill factor (FF). Additionally, the open-circuit voltage (VOC) of the ternary OSC lies between those of the two binary OSCs indicating the formation of an alloy between the two acceptors.

Impact of Terminal Halogen and CN Substitutions on Photoelectric Properties of Asymmetric Y6-Based NFA with Terminal Groups in Different Orientations: A DFT/TDDFT Study

Nonfullerene acceptors (NFAs) with an acceptor-donor-acceptor-donor-acceptor (A-DA'D-A) molecular framework have attracted much attention due to their excellent performance. However, the modifications of terminal units of asymmetric Y6-based NFA with terminal groups of different orientations are still few, and its effects on photoelectrical properties are still not clear. In this work, based on asymmetric IPC-BEH-IC2F (showing better performance than Y6 in experiment) with terminal groups in different orientations, we systematically designed six new NFAs via halogen and CN substitutions on terminal groups. The molecular planarity, dipole moments, electrostatic potential maps and their fluctuations, frontier molecular orbitals, exciton binding energy, UV-vis spectra, and energy difference between the first singlet and triplet states of these NFAs are predicted using reliable density functional theory (DFT) and time-dependent DFT (T-DFT) calculations. The results show that with respect to prototype CN-F, Br-F, CN-Br, and CN-Cl exhibit comparable energy levels of the lowest unoccupied molecular orbital (LUMO), reduced energy gap (by at least 0.026 eV), Eb (by at least 0.002 eV), and ΔEST (by at least 0.009 eV) values, red shifts (by at least 2 nm) in the wavelengths of the main absorption peaks, and enhanced absorption (by at least 0.05 in total oscillator strength) in the visible to near-infrared regions, indicating their potential as outstanding asymmetric NFAs. This study offers valuable insights into the future design and optimization of NFAs featuring asymmetric terminal groups.

Photovoltage enhancement of M-series acceptor-based polymer solar cells and minimodules through the modulation of charge-transfer states

Side-chain fluorination can enhance the backbone organization and carrier mobility of non-fullerene acceptors (NFAs) but it often reduces their photovoltage due to the resulting deeper-lying lowest unoccupied molecular orbital (LUMO) levels. Herein, we present a strategy to regulate the LUMO levels of two NFAs, MC9F5 and MC7F5, by repositioning the highly electronegative -C2F5 moieties on the side chains. This approach mitigates the impact of fluorination on the energy levels, thereby improving the photovoltage and overall device performance. By incorporating 10,10,11,11,11-pentafluoro-2-(8,8,9,9,9-pentafluorononyl)undecyl side chains, the -C2F5 moieties are positioned away from the conjugated backbone of MC9F5, resulting in an elevated LUMO level compared with MC7F5, which features 8,8,9,9,9-pentafluoro-2-(6,6,7,7,7-pentafluoroheptyl)nonyl side chains. This modification reduces both the charge generation and the non-radiative energy losses in the MC9F5-based devices. The MC9F5-based small-area and minimodule devices achieve efficiencies of 18.02% and 15.66%, respectively, which are among the highest values reported for acceptor-donor-acceptor-type NFAs. This study highlights a valuable fluorination strategy for achieving high-performance NFAs.

Aggregation Engineering of Toluene-Processed Acceptor Layer Enables Over 19% Efficiency of Air-Blade-Coated Organic Solar Cells

Understanding the unique features of photovoltaic materials in high-performance blade-coated organic solar cells (OSCs) is critical to narrow the device performance difference between spin-coating and blade-coating methods. In this work, it is clarified that the molecular packing of acceptor and molecule-solvent interaction plays an essential role in determining the photovoltaic performance of blade-coated layer-by-layer OSCs. It is demonstrated that the unique dimer packing feature of L8-BO-4Cl can lead to lower excited energy (∆ES1) and dominant J-aggregates in the blade-coated film compared to the analogs of Y6 and L8-BO. Meanwhile, the weaker molecule-solvent interaction between L8-BO-4Cl and toluene is in favor of forming prominent J-aggregation in blade-coated film, contributing to a more compact π-stacking than Y6 and L8-BO. Additionally, the blade-coated D18/L8-BO-4Cl film shows more defined interpenetrating networks with clearer donor-acceptor interfaces than D18/Y6 and D18/L8-BO, facilitating improved charge extraction and suppressed charge recombination. As a result, the air-blade-coated layer-by-layer device based on D18/L8-BO-4Cl yields a remarkable power-conversion efficiency (PCE) of 19.31% without any additive and post-treatment, while much lower PCEs of 7.01% and 16.47% are obtained in the device based on D18/Y6 and D18/L8-BO, respectively. This work offers an effective approach to developing highly efficient air-blade-coated layer-by-layer OSCs.

Non-adiabatic Dynamical Simulations to the Radiative and Non-radiative Recombinations of the Non-fullerene Acceptor Excited State To Optimize Its Photoluminescence Quantum Yield

Optimizing the photoluminescence quantum yield (PLQY) of non-fullerene acceptor (NFA) molecules is critical for reducing the non-radiative recombination energy loss in NFA-based organic solar cells. In this letter, by developing a non-adiabatic dynamical method combined with different electron population rate equations, we separately simulate the radiative and non-radiative recombination process of the NFA molecular excited state, and thus clarify the quantitative correlations of typical characteristics of NFA molecules with their PLQY, including the analyses for the corresponding mechanisms directed against the conventional "energy gap law". The main findings include: weakening the intramolecular electron-phonon coupling and electronic push-pull potential can optimize the competition between radiative and non-radiative recombinations, thus improving PLQY; furthermore, increasing the intermolecular J-aggregation ratio should be an effective strategy to alleviate the aggregation-induced reduction in PLQY. These findings provide clear directions for the rational design of NFA molecules and morphology optimization toward a higher PLQY.

Ultrafast energy transfer beyond the Förster approximation in organic photovoltaic blends with non-fullerene acceptors

Recent studies on organic photovoltaic (OPV) systems have highlighted the critical role of energy transfer in excited-state dynamics. This process has traditionally been explained through the model of long-range Förster resonance energy transfer (FRET). In this study, we demonstrate a donor-to-acceptor short-range energy transfer (SRET) mechanism in OPV blends with non-fullerene acceptors, extending beyond the Förster approximation. This SRET occurs as a two-step process mediated by interfacial excitations with mixed charge-transfer and local excitation features. We further validate this model through studies on planar heterojunctions, precisely controlling the thickness of interlayers. These findings underscore the short-range interactions in regulating the donor-to-acceptor energy transfer in OPV blends, suggesting that SRET should be considered alongside FRET and charge-transfer processes for device optimizations.

Dynamics of vibrationally coupled intersystem crossing in state-of-the-art organic optoelectronic materials

This work investigates intersystem crossing (ISC) induced by spin-orbit coupling (SOC) in state-of-the-art non-fullerene acceptors (NFAs). A quantum chemistry study analyzed SOC in 10 NFAs using the optimized geometry of the ground state (OGGS), revealing the importance of excited-state character (local or charge transfer) in determining SOC. However, ISC rates calculated with Marcus formalism were significantly lower than experimental values, showing that the three-state model (S1, T1, and T2) is insufficient. A simplified method to calculate coupled probabilities was proposed, leveraging a quantum walk on a one-dimensional graph. This approach aligned ISC rates with experimental data and explained Y6's higher triplet state efficiency compared to ITIC-like NFAs. Further, the dihedral angle (ϕ) in IT-4Cl and Y6 was analyzed. Y6's unique excited-state potential energy curve (PEC) showed a minimum at ϕ ≈ 90o. Using PECs, ISC rates were refined, showing coupling via ϕ vibrations. Finally, the Wentzel-Kramers-Brillouin (WKB) approximation explained Y6's photoluminescence at low temperatures, highlighting non-adiabatic phenomena crucial for understanding the photophysics of organic semiconductors. Triplet states act as channels that enhance recombination, reducing the optoelectronic efficiency of semiconductor devices. Therefore, understanding and controlling these states can contribute to improving the efficiency of organic solar cells (OSCs) and organic light-emitting diodes (OLEDs).

Static and Dynamic Studies of Excitation in a Fullerene-Anthracene Complex

We investigate the static and dynamic aspects of an anthracene-fullerene complex. Our detailed investigation includes (a) systematic scrutiny of the complex in its stable state through the examination of its chemical reactivity parameters and absorption spectra and (b) exploration of its dynamic behavior in excited states at a femtosecond time scale. To achieve this, we employ a combination of ab initio molecular dynamics (AIMD) and time-dependent density functional theory (TDDFT) to study not only the system's behavior in the excited state but also the temporal evolution of chemical reactivity parameters when it moves in a particular excited state. It shows greater reactivity in the excited state as compared to that in the ground state. Interestingly, our findings reveal that the complex can even switch between excited states during its movement in certain trajectories. Accordingly, we conduct an extensive examination of the interactions among coupling components, which coincides with the occurrence of trajectory surface hopping.

Fluorinated and methylated ortho-benzodipyrrole-based acceptors suppressing charge recombination and minimizing energy loss in organic photovoltaics

The elimination of the A' unit from -type Y6-derivatives has led to the development of a new class of ortho-benzodipyrrole (o-BDP)-based A-DNBND-A-type NFAs. In this work, two new A-DNBND-A-type NFAs, denoted as CFB and CMB, are designed and synthesized, where electron-withdrawing fluorine atoms and electron-donating methyl groups are substituted on the benzene ring of the o-BDP moiety, respectively. CFB exhibits a blue-shifted absorption spectrum, stronger intermolecular interactions, shorter π-π stacking distances, and more ordered 3D intermolecular packing in the neat and blend films, enabling it to effectively suppress charge recombination in the PM6:CFB device showing a higher PCE of 16.55% with an FF of 77.45%. CMB displays a higher HOMO/LUMO energy level, a smaller optical bandgap, and a less ordered 3D packing, which contributes to its superior ability to suppress energy loss in the PM6:CMB device with a high V oc of 0.90 V and a PCE of 16.46%. To leverage the advantages of CFB and CMB, ternary PM6:Y6-16:CFB and PM6:Y6-16:CMB devices are fabricated. The PM6:Y6-16:CFB device exhibits the highest PCE of 17.83% with an increased V oc of 0.86 V and a J sc of 27.32 mA cm-2, while the PM6:Y6-16:CMB device displayed an elevated V oc of 0.87 V and an improved FF of 74.71%, leading to a PCE of 17.44%. The high PCE was achieved using the non-halogenated greener solvent o-xylene, highlighting their potential for facilitating more eco-friendly processing procedures. C-shaped disubstituted o-BDP-based A-D-A type acceptors open up new avenues for tailoring electronic properties and molecular self-assembly, achieving higher OPV performance with enhanced charge recombination suppression and reduced energy loss.

Rebuilding Peripheral F, Cl, Br Footprints on Acceptors Enables Binary Organic Photovoltaic Efficiency Exceeding 19.7

Given homomorphic fluorine (F), chlorine (Cl) and bromine (Br) atoms are featured with gradually enlarged polarizability/atomic radius but decreased electronegativity, the rational screen of halogen species and locations on small molecular acceptors (SMAs) is quite essential for acquiring desirable molecular packing to boost efficiency of organic solar cells (OSCs). Herein, three isomeric SMAs (CH-F, CH-C and CH-B) are constructed by delicately rebuilding peripheral F, Cl, Br footprints on both central and end units. Such a re-permutation of peripheral halogens could not only maintain the structural symmetry of SMAs to the maximum, but also acquire extra asymmetric benefits of enhanced dipole moment and intramolecular charge transfer, etc. Moreover, central brominating enhances molecular crystallinity of CH-B without introducing undesirable steric hindrance on end groups, thus rendering a better balance between high crystallization and domain size control in PM6:CH-B blend. Further benefitting from the large dielectric constant, small exciton binding energy, optimized molecular packing and great electron transfer integral, CH-B affords the first class binary OSC efficiency of 19.78 %, moreover, the highest efficiency of 18.35 % thus far when increasing active layer thickness to ~300 nm. Our successful screening in rebuilding peripheral halogen footprints provides the valuable insight into further rational design of SMAs for record-breaking OSCs.

Terminal Fluorination Modulates Crystallinity and Aggregation of Fully Non-Fused Ring Electron Acceptors for High-Performance and Durable Near-Infrared Organic Photodetectors

High dark current density (Jd) severely hinders further advancement of near-infrared organic photodetectors (NIR OPDs). Herein, we tackle this grand challenge by regulating molecular crystallinity and aggregation of fully non-fused ring electron acceptors (FNREAs). TBT-V-F, which features fluorinated terminals, notably demonstrates crystalline intensification and a higher prevalence predominance of J-aggregation compared to its chlorinated counterpart (TBT-V-Cl). The amalgamation of advantages confers TBT-V-F-based OPDs with lower nonradiative energy loss, improved charge transport, decreased energetic disorder, and reduced trap density. Consequently, the corresponding self-powered OPDs exhibit a 40-fold decrease in Jd, a remarkable increase in detectivity (D*sh), faster response time, and superior thermal stability compared to TBT-V-Cl-based OPDs. Further interfacial optimization results in an ultra-low Jd of 7.30×10-12 A cm-2 with D*sh over 1013 Jones in 320-920 nm wavelength and a climax of 2.2×1014 Jones at 800 nm for the TBT-V-F-based OPDs, representing one of the best results reported to date. This work paves a compelling material-based strategy to suppress Jd for highly sensitive NIR OPDs, while also illustrates the viability of FNREAs in construction of stable and affordable NIR OPDs for real-world applications.

Nanoscale Balance of Energy Loss and Quantum Efficiency for High-Efficiency Polythiophene-Based Organic Solar Cells

Polythiophene donors offer scalable and cost-effective solutions for the organic photovoltaic industry. A thorough understanding of the structure-property-performance relationship is essential for advancing polythiophene-based organic solar cells (PTOSCs) with high power conversion efficiencies (PCEs). Herein, we develop two polythiophene donors─PTTz-CN and PTTz-CN(T2)─to verify the energy loss-quantum efficiency relationship. The strong preaggregation property of PTTz-CN improves quantum efficiency in spite of high nonradiative recombination energy loss, while PTTz-CN(T2) chains are weakly preaggregated, causing low quantum efficiency, accompanied by low nonradiative recombination energy loss though. Synergistically optimized energy loss and quantum efficiency are achieved by judiciously mixing PTTz-CN and PTTz-CN(T2), delivering outstanding PCEs of up to 16.4% in the PTOSC system and 19.6% in an archetype of a high-performing OSC containing the optimal PTTz-CN:PTTz-CN(T2) composition. We highlight the significance of a desirable balance between energy loss and quantum efficiency via molecular interaction tuning of polythiophene donors to improve the PTOSC performances.

Balanced Miscibility and Crystallinity by 2D Acceptors Enabled Halogen-Free Solvent-Processed Organic Solar Cells to Achieve 19.28% Efficiency

Two highly crystalline 2D acceptors, ATIC-C11 and ATIC-BO, with acenaphthene-expanded quinoxaline central cores, have been demonstrated with very different characteristics in ternary organic solar cells (OSCs). The difference in side chains induces their distinctive molecular packing mode and unique crystal structure, in which ATIC-C11 displays a 3D structure with an elliptical framework, and ATIC-BO gives a rectangular framework. Their high crystallinity contributes to organized molecular packing in ternary devices, thus low energetic disorder and suppressed energy loss. Through the analysis of morphology and carrier kinetics, it is found that ATIC-BO's strong self-aggregation and immiscibility induce large aggregates and severely impede charge transfer (CT) and dissociation. Conversely, ATIC-C11's suitable crystallinity and compatibility positively regulate the crystalline kinetics during film formation, thus forming much-ordered molecular packing and favorable phase separation size in blend films. As a result, ATIC-C11-based ternary devices achieve a high efficiency of 19.28% with potential in scalability and stability, which is the top-ranking efficiency among nonhalogenated solvent-processed OSCs. This work not only displays highly efficient and stable halogen-free solvent-processed organic photovoltaics (OPVs), but also offers a new thought for material design and selection rule on the third component in highly efficient ternary OSCs.

Activationless Charge Transfer Drives Photocurrent Generation in Organic Photovoltaic Blends Independent of Energetic Offset

Organic photovoltaics (OPVs) have recently shown substantial progress in enhancing device efficiency, driven in particular by advances in the design of nonfullerene acceptors and the reduction of the energy offset driving exciton separation at the donor/acceptor interface. Herein, we employ temperature-dependent transient absorption spectroscopy to investigate the activation energy for charge generation and recombination in a range of bulk heterojunction blends with nonfullerene acceptors. Remarkably, we find that in all cases charge generation is almost activationless, in the range of 11-21 meV, independent of energetic offset. Geminate recombination is also observed to be almost activationless, with only the kinetics of bimolecular charge recombination being strongly temperature-dependent, with an activation energy >400 meV. Our observation of essentially activationless charge generation, independent of energy offset, strongly indicates that charge generation in such blends does not follow Marcus theory but can rather be considered an adiabatic process associated with the motion of thermally unrelaxed carriers.

Efficient Derivatization of a Thienobenzobisthiazole-Based π-Conjugated Polymer Through Late-Stage Functionalization Towards High-Efficiency Organic Photovoltaic Cells

Derivatization is essential for optimizing organic material properties. However, because functional groups are often introduced at an early stage of the synthesis, similar intermediates have to be repeatedly synthesized to produce derivatives, which amounts to a daunting and time-consuming task. Using thienobenzobisthiazole (TBTz) as a building unit of donor polymers for organic photovoltaics (OPVs), we demonstrate an efficient derivatization of a TBTz-based π-conjugated polymer by late-stage functionalization. In the developed synthetic route, functional groups are introduced at the last step of monomer synthesis, enabling us to easily synthesize several derivatives from a common intermediate. Ester and acyl groups are introduced into the polymer instead of the alkyl group, giving rise to deep HOMO energy levels and resulting in OPV cells with high open-circuit voltage even in the absence of halogen substituents that are typically introduced into the donor polymers. Notably, the ester-functionalized TBTz-based polymer shows a small nonradiative voltage loss (ΔVnr) of 0.19 V and has one of the highest charge generation efficiencies among the halogen-free donor polymers with similar ΔVnr, improving the critical trade-off relationship between voltage loss and charge generation. Our results provide an important guideline for the efficient development of high-performance polymers for OPVs.

Exciton Diffusion to Low Energy Sites of the Acceptor Drives Charge Photogeneration in D18:Y6 Solar Cells

We have investigated charge generation pathways in efficient organic photovoltaic blends of the polymer donor D18 and the small-molecule acceptor Y6 using transient absorption and time-resolved fluorescence spectroscopies. We find that energy transfer from D18 to Y6 outcompetes electron transfer and is followed by exciton diffusion from regions of the disordered Y6 phase to Y6 aggregates before hole transfer to D18. Aggregation of Y6 molecules increases their ionization energy by ∼0.3 eV and provides a driving force for hole transfer from Y6 excitons and spontaneously generated charge pairs to D18. We observed ultrafast depolarization of the Y6 ground-state bleaching in <200 fs, which indicates delocalization of primary excitons in Y6 aggregates. This delocalization can explain the spontaneous generation of charge pairs in neat Y6 films and Y6-rich blends. Our results show that subtle aggregation control of the low-energy absorber can be used for balancing photocurrent generation with low voltage loss in photovoltaic blends.

Loosely Bounded Exciton with Enhanced Delocalization Capability Boosting Efficiency of Organic Solar Cells

In organic solar cells (OSCs), electron acceptors have undergone multiple updates, from the initial fullerene derivatives, to the later acceptor-donor-acceptor type non-fullerene acceptors (NFAs), and now to Y-series NFAs, based on which efficiencies have reached over 19%. However, the key property responsible for further improved efficiency from molecular structure design is remained unclear. Herein, the material properties are comprehensively scanned by selecting PC71BM, IT-4F, and L8-BO as the representatives for different development stages of acceptors. For comparison, asymmetric acceptor of BTP-H5 with desired loosely bounded excitons is designed and synthesized. It's identified that the reduction of intrinsically exciton binding energy (Eb) and the enhancement of exciton delocalization capability act as the key roles in boosting the performance. Notably, 100 meV reduction in Eb has been observed from PC71BM to BTP-H5, correspondingly, electron-hole pair distance of BTP-H5 is almost two times over PC71BM. As a result, efficiency is improved from 40% of S-Q limit for PC71BM-based OSC to 60% for BTP-H5-based one, which achieves an efficiency of 19.07%, among the highest values for binary OSCs. This work reveals the confirmed function of exciton delocalization capability quantitatively in pushing the efficiency of OSCs, thus providing an enlightenment for future molecular design.

Nonadiabatic dynamical simulations to the radiative recombination of nonfullerene acceptor molecular excited states

Improving the radiative recombination rate of nonfullerene acceptor (NFA) molecular excited states can help to promote their photoluminescence quantum yield and thus reduce the nonradiative energy loss in NFA-based organic solar cells. In this Letter, by developing a nonadiabatic dynamical simulation method, we clarify quantitative correlations of some typical characteristics of NFA molecules with their radiative recombination rates. For a single NFA molecule, the weakening of electron-phonon coupling and the strengthening of electron-push-pull potential can each improve the radiative recombination rate. For different NFA molecular aggregates, their radiative recombination rates are all reduced compared with a single molecule, where the A-to-A and A-to-D type J-aggregates have higher rates than D-to-D type H-aggregate. To further improve the radiative recombination rate of NFA molecular J-aggregates, we should increase the intermolecular distance, such as extending the side chain length.

Charge-Transfer Complexes: Fundamentals and Advances in Catalysis, Sensing, and Optoelectronic Applications

Supramolecular assemblies, formed through electronic charge transfer between two or more entities, represent a rich class of compounds dubbed as charge-transfer complexes (CTCs). Their distinctive formation pathway, rooted in charge-transfer processes at the interface of CTC-forming components, results in the delocalization of electronic charge along molecular stacks, rendering CTCs intrinsic molecular conductors. Since the discovery of CTCs, intensive research has explored their unique properties including magnetism, conductivity, and superconductivity. Their more recently recognized semiconducting functionality has inspired recent developments in applications requiring organic semiconductors. In this context, CTCs offer a tuneable energy gap, unique charge-transport properties, tailorable physicochemical interactions, photoresponsiveness, and the potential for scalable manufacturing. Here, an updated viewpoint on CTCs is provided, presenting them as emerging organic semiconductors. To this end, their electronic and chemical properties alongside their synthesis methods are reviewed. The unique properties of CTCs that benefit various related applications in the realms of organic optoelectronics, catalysts, and gas sensors are discussed. Insights for future developments and existing limitations are described.

What is the Limit Size of 2D Conjugated Extension on Central Units of Small Molecular Acceptors in Organic Solar Cells?

2D conjugated extension on central units of small molecular acceptors (SMAs) has gained great successes in reaching the state-of-the-art organic photovoltaics. Whereas the limit size of 2D central planes and their dominant role in constructing 3D intermolecular packing networks are still elusive. Thus, by exploring a series of SMAs with gradually enlarged central planes, it is demonstrated that, at both single molecular and aggerated levels, there is an unexpected blue-shift for their film absorption but preferable reorganization energies, exciton lifetimes and binding energies with central planes enlarging, especially when comparing to their Y6 counterpart. More importantly, the significance of well-balanced molecular packing modes involving both central and end units is first disclosed through a systematic single crystal analysis, indicating that when the ratio of central planes area/end terminals area is no more than 3 likely provides a preferred 3D intermolecular packing network of SMAs. By exploring the limit size of 2D central planes, This work indicates that the structural profiles of ideal SMAs may require suitable central unit size together with proper heteroatom replacement instead of directly overextending 2D central planes to the maximum. These results will likely provide some guidelines for future better molecular design.

Optimizing Molecular Packing via Steric Hindrance for Reducing Non-Radiative Recombination in Organic Solar Cells

Innovative molecule design strategy holds promise for the development of next-generation acceptor materials for efficient organic solar cells with low non-radiative energy loss (ΔEnr). In this study, we designed and prepared three novel acceptors, namely BTP-Biso, BTP-Bme and BTP-B, with sterically structured triisopropylbenzene, trimethylbenzene and benzene as side chains inserted into the shoulder of the central core. The progressively enlarged steric hindrance from BTP-B to BTP-Bme and BTP-Biso induces suppressed intramolecular rotation and altered the molecule packing mode in their aggregation states, leading to significant changes in absorption spectra and energy levels. By regulating the intermolecular π-π interactions, BTP-Bme possesses relatively reduced non-radiative recombination rate and extended exciton diffusion lengths. The binary device based on PB2 : BTP-Bme exhibits an impressive power conversion efficiency (PCE) of 18.5 % with a low ΔEnr of 0.19 eV. Furthermore, the ternary device comprising PB2 : PBDB-TF : BTP-Bme achieves an outstanding PCE of 19.3 %. The molecule design strategy in this study proposed new perspectives for developing high-performance acceptors with low ΔEnr in OSCs.

Limiting factors for charge generation in low-offset fullerene-based organic solar cells

Free charge generation after photoexcitation of donor or acceptor molecules in organic solar cells generally proceeds via (1) formation of charge transfer states and (2) their dissociation into charge separated states. Research often either focuses on the first component or the combined effect of both processes. Here, we provide evidence that charge transfer state dissociation rather than formation presents a major bottleneck for free charge generation in fullerene-based blends with low energetic offsets between singlet and charge transfer states. We investigate devices based on dilute donor content blends of (fluorinated) ZnPc:C60 and perform density functional theory calculations, device characterization, transient absorption spectroscopy and time-resolved electron paramagnetic resonance measurements. We draw a comprehensive picture of how energies and transitions between singlet, charge transfer, and charge separated states change upon ZnPc fluorination. We find that a significant reduction in photocurrent can be attributed to increasingly inefficient charge transfer state dissociation. With this, our work highlights potential reasons why low offset fullerene systems do not show the high performance of non-fullerene acceptors.

Quinoxaline-based Y-type acceptors for organic solar cells

Minimizing energy loss plays a critical role in the quest for high-performance organic solar cells (OSCs). However, the origin of large energy loss in OCSs is complicated, involving the strong exciton binding energy of organic semiconductors, nonradiative charge-transfer state decay, defective molecular stacking network, and so on. The recently developed quinoxaline (Qx)-based acceptors have attracted extensive interest due to their low reorganization energy, high structural modification possibilities, and distinctive molecular packing modes, which contribute to reduced energy loss and superior charge generation/transport, thus improving the photovoltaic performance of OSCs. This perspective summarizes the design strategies of Qx-based acceptors (including small-molecule, giant dimeric and polymeric acceptors) and the resulting optoelectronic properties and device performance. In addition, the ternary strategy of introducing Qx-based acceptors as the third component to reduce energy loss is briefly discussed. Finally, some perspectives for the further exploration of Qx-based acceptors toward efficient, stable, and industry-compatible OSCs are proposed.

High Open-Circuit Voltage Organic Solar Cells with 19.2% Efficiency Enabled by Synergistic Side-Chain Engineering

Restricted by the energy-gap law, state-of-the-art organic solar cells (OSCs) exhibit relatively low open-circuit voltage (VOC) because of large nonradiative energy losses (ΔEnonrad). Moreover, the trade-off between VOC and external quantum efficiency (EQE) of OSCs is more distinctive; the power conversion efficiencies (PCEs) of OSCs are still <15% with VOCs of >1.0 V. Herein, the electronic properties and aggregation behaviors of non-fullerene acceptors (NFAs) are carefully considered and then a new NFA (Z19) is delicately designed by simultaneously introducing alkoxy and phenyl-substituted alkyl chains to the conjugated backbone. Z19 exhibits a hypochromatic-shifted absorption spectrum, high-lying lowest unoccupied molecular orbital energy level and ordered 2D packing mode. The D18:Z19-based blend film exhibits favorable phase separation with face-on dominated molecular orientation, facilitating charge transport properties. Consequently, D18:Z19 binary devices afford an exciting PCE of 19.2% with a high VOC of 1.002 V, surpassing Y6-2O-based devices. The former is the highest PCE reported to date for OSCs with VOCs of >1.0 V. Moreover, the ΔEnonrad of Z19- (0.200 eV) and Y6-2O-based (0.155 eV) devices are lower than that of Y6-based (0.239 eV) devices. Indications are that the design of such NFA, considering the energy-gap law, could promote a new breakthrough in OSCs.

Solid Additive Dual-Regulates Spectral Response Enabling High-Performance Semitransparent Organic Solar Cells

Semi-transparent organic solar cells (ST-OSCs) possess significant potential for applications in vehicles and buildings due to their distinctive visual transparency. Conventional device engineering strategies are typically used to optimize photon selection and utilization at the expense of power conversion efficiency (PCE); moreover, the fixed spectral utilization range always imposes an unsatisfactory upper limit to its light utilization efficiency (LUE). Herein, a novel solid additive named 1,3-diphenoxybenzene (DB) is employed to dual-regulate donor/acceptor molecular aggregation and crystallinity, which effectively broadens the spectral response of ST-OSCs in near-infrared region. Besides, more visible light is allowed to pass through the devices, which enables ST-OSCs to possess satisfactory photocurrent and high average visible transmittance (AVT) simultaneously. Consequently, the optimal ST-OSC based on PP2+DB/BTP-eC9+DB achieves a superior LUE of 4.77%, representing the highest value within AVT range of 40-50%, which also correlates with the formation of multi-scale phase-separated morphology. Such results indicate that the ST-OSCs can simultaneously meet the requirements for minimum commercial efficiency and plant photosynthesis when integrated with the roofs of agricultural greenhouses. This work emphasizes the significance of additives to tune the spectral response in ST-OSCs, and charts the way for organic photovoltaics in economically sustainable agricultural development.

Optimization of Charge Management and Energy Loss in All-Small-Molecule Organic Solar Cells

All-small-molecule organic solar cells (ASM-OSCs) have received tremendous attention in recent decades because of their advantages over their polymer counterparts. These advantages include well-defined chemical structures, easy purification, and negligible batch-to-batch variation. Remarkable progress with a power conversion efficiency (PCE) of over 17% has recently been achieved with improved charge management (FF × JSC) and reduced energy loss (Eloss). Morphology control is the key factor in the progress of ASM-OSCs, which remains a significant challenge because of the similarities in the molecular structures of the donors and acceptors. In this review, the effective strategies for charge management and/or Eloss reduction from the perspective of effective morphology control are summarized. The aim is to provide practical insights and guidance for material design and device optimization to promote further development of ASM-OSCs to a level where they can compete with or even surpass the efficiency of polymer solar cells.

A2-A1-D-A1-A2-Type Nonfullerene Acceptors

The A2-A1-D-A1-A2-type molecules consist of one electron-donating (D) core flanked by two electron-accepting units (A1 and A2) and have emerged as an essential branch of nonfullerene acceptors (NFAs). These molecules generally possess higher molecular energy levels and wider optical bandgaps compared with those of the classic A-D-A- and A-DA'D-A-type NFAs, owing to the attenuated intramolecular charge transfer effect. These characteristics make them compelling choices for the fabrication of high-voltage organic photovoltaics (OPVs), ternary OPVs, and indoor OPVs. Herein, the recent progress in the A2-A1-D-A1-A2-type NFAs are reviewed, including the molecular engineering, structure-property relationships, voltage loss (Vloss), device stability, and photovoltaic performance of binary, ternary, and indoor OPVs. Finally, the challenges and provided prospects are discussed for the further development of this type of NFAs.

New Avenues for Organic Solar Cells Using Intrinsically Charge-Generating Materials

The molecular electron acceptor material Y6 has been a key part of the most recent surge in organic solar cell sunlight-to-electricity power conversion efficiency, which is now approaching 20%. Numerous studies have sought to understand the fundamental photophysical reasons for the exceptional performance of Y6 and its growing family of structural derivatives. Though significant uncertainty about several details remains, many have concluded that initially photogenerated excited states rapidly convert into electron-hole charge pairs in the neat material. These charge pairs are characterized by location of the electron and hole on different Y6 molecules, in contrast to the Frenkel excitons that dominate the behavior of most organic semiconductor materials. Here, we summarize the current state of knowledge regarding Y6 photophysics and the key observations that have led to it. We then link this understanding to other advances, such as the role of quadrupolar fields in donor-acceptor blends, and the importance of molecular interactions and organization in providing the structural basis for Y6's properties. Finally, we turn our attention to ways of making use of the new photophysics of Y6, and suggest molecular doping, crystal structure tuning, and electric field engineering as promising avenues for future exploration.

Rational molecular and device design enables organic solar cells approaching 20% efficiency

For organic solar cells to be competitive, the light-absorbing molecules should simultaneously satisfy multiple key requirements, including weak-absorption charge transfer state, high dielectric constant, suitable surface energy, proper crystallinity, etc. However, the systematic design rule in molecules to achieve the abovementioned goals is rarely studied. In this work, guided by theoretical calculation, we present a rational design of non-fullerene acceptor o-BTP-eC9, with distinct photoelectric properties compared to benchmark BTP-eC9. o-BTP-eC9 based device has uplifted charge transfer state, therefore significantly reducing the energy loss by 41 meV and showing excellent power conversion efficiency of 18.7%. Moreover, the new guest acceptor o-BTP-eC9 has excellent miscibility, crystallinity, and energy level compatibility with BTP-eC9, which enables an efficiency of 19.9% (19.5% certified) in PM6:BTP-C9:o-BTP-eC9 based ternary system with enhanced operational stability.

The role of interfacial donor-acceptor percolation in efficient and stable all-polymer solar cells

Polymerization of Y6-type acceptor molecules leads to bulk-heterojunction organic solar cells with both high power-conversion efficiency and device stability, but the underlying mechanism remains unclear. Here we show that the exciton recombination dynamics of polymerized Y6-type acceptors (Y6-PAs) strongly depends on the degree of aggregation. While the fast exciton recombination rate in aggregated Y6-PA competes with electron-hole separation at the donor-acceptor (D-A) interface, the much-suppressed exciton recombination rate in dispersed Y6-PA is sufficient to allow efficient free charge generation. Indeed, our experimental results and theoretical simulations reveal that Y6-PAs have larger miscibility with the donor polymer than Y6-type small molecular acceptors, leading to D-A percolation that effectively prevents the formation of Y6-PA aggregates at the interface. Besides enabling high charge generation efficiency, the interfacial D-A percolation also improves the thermodynamic stability of the blend morphology, as evident by the reduced device "burn-in" loss upon solar illumination.

Maximizing Performance and Stability of Organic Solar Cells at Low Driving Force for Charge Separation

Thanks to the development of novel electron acceptor materials, the power conversion efficiencies (PCE) of organic photovoltaic (OPV) devices are now approaching 20%. Further improvement of PCE is complicated by the need for a driving force to split strongly bound excitons into free charges, causing voltage losses. This review discusses recent approaches to finding efficient OPV systems with minimal driving force, combining near unity quantum efficiency (maximum short circuit currents) with optimal energy efficiency (maximum open circuit voltages). The authors discuss apparently contradicting results on the amount of exciton binding in recent literature, and approaches to harmonize the findings. A comprehensive view is then presented on motifs providing a driving force for charge separation, namely hybridization at the donor:acceptor interface and polarization effects in the bulk, of which quadrupole moments (electrostatics) play a leading role. Apart from controlling the energies of the involved states, these motifs also control the dynamics of recombination processes, which are essential to avoid voltage and fill factor losses. Importantly, all motifs are shown to depend on both molecular structure and process conditions. The resulting high dimensional search space advocates for high throughput (HT) workflows. The final part of the review presents recent HT studies finding consolidated structure-property relationships in OPV films and devices from various deposition methods, from research to industrial upscaling.

Structure-Property Relationships for the Electronic Applications of Bis-Adduct Isomers of Phenyl-C61 Butyric Acid Methyl Ester

Higher adducts of a fullerene, such as the bis-adduct of PCBM (bis-PCBM), can be used to achieve shallower molecular orbital energy levels than, for example, PCBM or C60. Substituting the bis-adduct for the parent fullerene is useful to increase the open-circuit voltage of organic solar cells or achieve better energy alignment as electron transport layers in, for example, perovskite solar cells. However, bis-PCBM is usually synthesized as a mixture of structural isomers, which can lead to both energetic and morphological disorder, negatively affecting device performance. Here, we present a comprehensive study on the molecular properties of 19 pure bis-isomers of PCBM using a variety of characterization methods, including ultraviolet photoelectron spectroscopy, thermal gravimetric analysis, differential scanning calorimetry, single crystal structure, and (time-dependent) density functional theory calculation. We find that the lowest unoccupied molecular orbital of such bis-isomers can be tuned to be up to 170 meV shallower than PCBM and up to 100 meV shallower than the mixture of unseparated isomers. The isolated bis-isomers also show an electron mobility in organic field-effect transistors of up to 4.5 × 10-2 cm2/(V s), which is an order of magnitude higher than that of the mixture of bis-isomers. These properties enable the fabrication of the highest performing bis-PCBM organic solar cell to date, with the best device showing a power conversion efficiency of 7.2%. Interestingly, we find that the crystallinity of bis-isomers correlates negatively with electron mobility and organic solar cell device performance, which we relate to their molecular symmetry, with a lower symmetry leading to more amorphous bis-isomers, less energetic disorder, and higher dimensional electron transport. This work demonstrates the potential of side chain engineering for optimizing the performance of fullerene-based organic electronic devices.

Complete Peripheral Fluorination of the Small-Molecule Acceptor in Organic Solar Cells Yields Efficiency over 19

Due to the intrinsically flexible molecular skeletons and loose aggregations, organic semiconductors, like small molecular acceptors (SMAs) in organic solar cells (OSCs), greatly suffer from larger structural/packing disorders and weaker intermolecular interactions comparing to their inorganic counterparts, further leading to hindered exciton diffusion/dissociation and charge carrier migration in resulting OSCs. To overcome this challenge, complete peripheral fluorination was performed on basis of a two-dimensional (2D) conjugation extended molecular platform of CH-series SMAs, rendering an acceptor of CH8F with eight fluorine atoms surrounding the molecular backbone. Benefitting from the broad 2D backbone, more importantly, strengthened fluorine-induced secondary interactions, CH8F and its D18 blends afford much enhanced and more ordered molecular packings accompanying with enlarged dielectric constants, reduced exciton binding energies and more obvious fibrillary networks comparing to CH6F controls. Consequently, D18:CH8F-based OSCs reached an excellent efficiency of 18.80 %, much better than that of 17.91 % for CH6F-based ones. More excitingly, by employing D18-Cl that possesses a highly similar structure to D18 as a third component, the highest efficiency of 19.28 % for CH-series SMAs-based OSCs has been achieved so far. Our work demonstrates the dramatical structural multiformity of CH-series SMAs, meanwhile, their high potential for constructing record-breaking OSCs through peripheral fine-tuning.

Understanding and Suppressing Non-Radiative Recombination Losses in Non-Fullerene Organic Solar Cells

Organic solar cells benefit from non-fullerene acceptors (NFA) due to their high absorption coefficients, tunable frontier energy levels, and optical gaps, as well as their relatively high luminescence quantum efficiencies as compared to fullerenes. Those merits result in high yields of charge generation at a low or negligible energetic offset at the donor/NFA heterojunction, with efficiencies over 19% achieved for single-junction devices. Pushing this value significantly over 20% requires an increase in open-circuit voltage, which is currently still well below the thermodynamic limit. This can only be achieved by reducing non-radiative recombination, and hereby increasing the electroluminescence quantum efficiency of the photo-active layer. Here, current understanding of the origin of non-radiative decay, as well as an accurate quantification of the associated voltage losses are summarized. Promising strategies for suppressing these losses are highlighted, with focus on new material design, optimization of donor-acceptor combination, and blend morphology. This review aims at guiding researchers in their quest to find future solar harvesting donor-acceptor blends, which combine a high yield of exciton dissociation with a high yield of radiative free carrier recombination and low voltage losses, hereby closing the efficiency gap with inorganic and perovskite photovoltaics.

Impact of Electrostatic Interaction on Non-radiative Recombination Energy Losses in Organic Solar Cells Based on Asymmetric Acceptors

Reducing non-radiative recombination energy loss (ΔE3 ) is one key to boosting the efficiency of organic solar cells. Although the recent studies have indicated that the Y-series asymmetric acceptors-based devices featured relatively low ΔE3 , the understanding of the energy loss mechanism derived from molecular structure change is still lagging behind. Herein, two asymmetric acceptors named BTP-Cl and BTP-2Cl with different terminals were synthesized to make a clear comparative study with the symmetric acceptor BTP-0Cl. Our results suggest that asymmetric acceptors exhibit a larger difference of electrostatic potential (ESP) in terminals and semi-molecular dipole moment, which contributes to form a stronger π-π interaction. Besides, the experimental and theoretical studies reveal that a lower ESP-induced intermolecular interaction can reduce the distribution of PM6 near the interface to enhance the built-in potential and decrease the charge transfer state ratio for asymmetric acceptors. Therefore, the devices achieve a higher exciton dissociation efficiency and lower ΔE3 . This work establishes a structure-performance relationship and provides a new perspective to understand the state-of-the-art asymmetric acceptors.

The Energy Structure of Spin States in Reducing the Nonradiative Voltage Loss in Organic Solar Cells

In organic solar cells (OSCs), the nonradiative voltage loss (ΔVnr) has been identified as a critical factor for the relatively lower open-circuit voltage. Under open-circuit conditions, most of the charge recombination processes occur via the triplet exciton state, underscoring the importance of the energy structures concerning the local exciton (LE) and charge transfer (CT) spin states. In this Letter, we propose a five-state model to explore the spin state energy structures to reduce ΔVnr. Our calculations reveal that, to minimize ΔVnr, the spin singlet state for LE should possess a lower energy than the triplet state, ES1 < ET1. In contrast, the energies of the CT spin states have a negligible effect on ΔVnr. We identify the best energy structure as ES1 < ET1 ∼ ECT1/CT3. Moreover, our calculations demonstrate that strong couplings between these spin states, particularly involving spin flip, can effectively mitigate ΔVnr. These findings present novel insights for the advancement of OSCs.

Charge Carrier Dynamics in Non-Fullerene Acceptor-Based Organic Solar Cells: Investigating the Influence of Processing Additives Using Transient Absorption Spectroscopy

In this study, we present a comprehensive investigation into the charge generation mechanism in bulk-heterojunction organic solar cells employing non-fullerene acceptors (NFAs) both with and without the presence of processing additives. While photovoltaic devices based on Y6 or BTP-eC9 have shown remarkable power conversion efficiencies, the underlying charge generation mechanism in polymer:NFA blends remains poorly understood. To shed light on this, we employ transient absorption (TA) spectroscopy to elucidate the charge transfer pathway within a blend of the donor polymer PM6 and NFAs. Interestingly, the charge carrier lifetimes of neat Y6 and BTP-eC9 are comparable, both reaching up to 20 ns. However, the PM6:BTP-eC9 blend exhibits substantially higher charge carrier generation and a longer carrier lifetime compared to PM6:Y6 blend films, leading to superior performance. By comparing TA data obtained from PM6:Y6 or PM6:BTP-eC9 blend films with and without processing additives, we observe significantly enhanced charge carrier generation and prolonged charge carrier lifetimes in the presence of these additives. These findings underscore the potential of manipulating excited species as a promising avenue for further enhancing the performance of organic solar cells. Moreover, this understanding contributes to the advancement of NFA-based systems and the optimization of charge transfer processes in polymer:NFA blends.

Mitigating the Trade-Off between Non-Radiative Recombination and Charge Transport to Enable Efficient Ternary Organic Solar Cells

Ternary organic solar cells (OSCs) have attracted intensive studies due to their promising potential for attaining high-performing photovoltaics, whereas there has been an opening challenge in minimizing the open circuit voltage (Voc) loss while retaining the optimal carrier extraction in the multiple mixture absorbers. Here, we systemically investigate a ternary absorber comprised of two acceptors and a donor, in which the resultant Voc and fill factor are varied and determined by the ratios of acceptor components as a result of the unbalance of non-radiative recombination rates and charge transport. The transient absorption spectroscopy and electroluminescence techniques verify two distinguishable charge-transfer (CT) states in the ternary absorber, and the mismatch of non-radiative recombination rates of those two CT states is demonstrated to be associated with the Voc deficit, whilst the high-emissive acceptor molecule delivers inferior electron mobility, resulting in poor charge transport and a subpar fill factor. These findings enable us to optimize the mixture configuration for attaining the maximal-performing devices. Our results not only provide insight into maximizing the photovoltage of organic solar cells but can also motivate researchers to further unravel the photophysical mechanisms underlying the intermolecular electronic states of organic semiconductors.

Charge-Transfer State Dissociation Efficiency Can Limit Free Charge Generation in Low-Offset Organic Solar Cells

We investigate the charge-generation processes limiting the performance of low-offset organic bulk-heterojunction solar cells by studying a series of newly synthesized PBDB-T-derivative donor polymers whose ionisation energy (IE) is tuned via functional group (difluorination or cyanation) and backbone (thiophene or selenophene bridge) modifications. When blended with the acceptor Y6, the series present heterojunction donor-acceptor IE offsets (ΔEIE) ranging from 0.22 to 0.59 eV. As expected, small ΔEIE decrease nonradiative voltage losses but severely suppresses photocurrent generation. We explore the origin of this reduced charge-generation efficiency at low ΔEIE through a combination of opto-electronic and spectroscopic measurements and molecular and device-level modeling. We find that, in addition to the expected decrease in local exciton dissociation efficiency, reducing ΔEIE also strongly reduces the charge transfer (CT) state dissociation efficiency, demonstrating that poor CT-state dissociation can limit the performance of low-offset heterojunction solar cells.

A rare case of brominated small molecule acceptors for high-efficiency organic solar cells

Given that bromine possesses similar properties but extra merits of easily synthesizing and polarizing comparing to homomorphic fluorine and chlorine, it is quite surprising very rare high-performance brominated small molecule acceptors have been reported. This may be caused by undesirable film morphologies stemming from relatively larger steric hindrance and excessive crystallinity of bromides. To maximize the advantages of bromides while circumventing weaknesses, three acceptors (CH20, CH21 and CH22) are constructed with stepwise brominating on central units rather than conventional end groups, thus enhancing intermolecular packing, crystallinity and dielectric constant of them without damaging the favorable intermolecular packing through end groups. Consequently, PM6:CH22-based binary organic solar cells render the highest efficiency of 19.06% for brominated acceptors, more excitingly, a record-breaking efficiency of 15.70% when further thickening active layers to ~500 nm. By exhibiting such a rare high-performance brominated acceptor, our work highlights the great potential for achieving record-breaking organic solar cells through delicately brominating.

Biorenewable Solvents for High-Performance Organic Solar Cells

With the advent of nonfullerene acceptors (NFAs), organic photovoltaic (OPV) devices are now achieving high enough power conversion efficiencies (PCEs) for commercialization. However, these high performances rely on active layers processed from petroleum-based and toxic solvents, which are undesirable for mass manufacturing. Here, we demonstrate the use of biorenewable 2-methyltetrahydrofuran (2MeTHF) and cyclopentyl methyl ether (CPME) solvents to process donor: NFA-based OPVs with no additional additives in the active layer. Furthermore, to reduce the overall carbon footprint of the manufacturing cycle of the OPVs, we use polymeric donors that require a few synthetic steps for their synthesis, namely, PTQ10 and FO6-T, which are blended with the Y-series NFA Y12. High performance was achieved using 2MeTHF as the processing solvent, reaching PCEs of 14.5% and 11.4% for PTQ10:Y12 and FO6-T:Y12 blends, respectively. This work demonstrates the potential of using biorenewable solvents without additives for the processing of OPV active layers, opening the door to large-scale and green manufacturing of organic solar cells.

A Wide Bandgap Acceptor with Large Dielectric Constant and High Electrostatic Potential Values for Efficient Organic Photovoltaic Cells

Low-bandgap materials have achieved rapid development and promoted the enhancement of power conversion efficiencies (PCEs) of organic photovoltaic (OPV) cells. However, the design of wide-bandgap non-fullerene acceptors (WBG-NFAs), required by indoor applications and tandem cells, has been lagging far behind the development of OPV technologies. Here, we designed and synthesized two NFAs named ITCC-Cl and TIDC-Cl by finely optimizing ITCC. In contrast with ITCC and ITCC-Cl, TIDC-Cl can maintain a wider bandgap and a higher electrostatic potential simultaneously. When blending with the donor PB2, the highest dielectric constant is also obtained in TIDC-Cl-based films, enabling efficient charge generation. Therefore, the PB2:TIDC-Cl-based cell possessed a high PCE of 13.8% with an excellent fill factor (FF) of 78.2% under the air mass 1.5G (AM 1.5G) condition. Furthermore, an exciting PCE of 27.1% can be accomplished in the PB2:TIDC-Cl system under the illumination of 500 lux (2700 K light-emitting diode). Combined with the theoretical simulation, the tandem OPV cell based on TIDC-Cl was fabricated and exhibited an excellent PCE of 20.0%.

Dual Charge Transfer Generated from Stable Mixed-Valence Radical Crystals for Boosting Solar-to-Thermal Conversion

Realizing dual charge transfer (CT) based on stable organic radicals in one system is a long-sought goal, however, remains challenging. In this work, a stable mixed-valence radical crystal is designed via a surfactant-assisted method, namely TTF-(TTF^+• )₂ -RC (where TTF = tetrathiafulvalene), containing dual CT interactions. The solubilization of surfactants enables successful co-crystallization of mixed-valence TTF molecules with different polarity in aqueous solutions. Short intermolecular distances between adjacent TTF moieties within TTF-(TTF^+• )₂ -RC facilitate both inter-valence CT (IVCT) between neutral TTF and TTF^+• , and inter-radical CT (IRCT) between two TTF^+• in radical π-dimer, which are confirmed by single-crystal X-ray diffraction, solid-state absorption, electron spin resonance measurements, and DFT calculations. Moreover, TTF-(TTF^+• )₂ -RC reveals an open-shell singlet diradical ground state with the antiferromagnetic coupling of 2J = -657 cm^-1 and an unprecedented temperature-dependent magnetic property, manifesting the main monoradical characters of IVCT at 113-203 K while the spin-spin interactions in radical dimers of IRCT are predominant at 263-353 K. Notably, dual CT characters endow TTF-(TTF^+• )₂ -RC with strong light absorption over the full solar spectrum and outstanding stability. As a result, TTF-(TTF^+• )₂ -RC exhibits significantly enhanced photothermal property, an increase of 46.6 °C within 180 s upon one-sun illumination.

Revealing the Role of Donor/Acceptor Interfaces in Nonfullerene-Acceptor Based Organic Solar Cells: Charge Separation versus Recombination

Organic solar cells (OSCs) based on nonfullerene-acceptors (NFAs) have achieved rapid development, while the role of donor/acceptor (D/A) interfaces in NFA based heterosystems has not been fully addressed. Here, we clarify that the photoinduced spontaneous charge separation efficiency in typical NFA heterosystems can reach up to 67%, and the charge separation efficiency contributed by the D/A interface is only 25%. The more important role of D/A interfaces is reducing the charge recombination rate, especially optimizing the competition between radiative and nonradiative charge recombination, thus reducing the nonradiative voltage loss. Systematical simulations demonstrate that there exists an optimal interfacial distance for a fixed energy offset, at which the D/A interface can reduce the nonradiative voltage loss by a maximum value of 0.12 V. Hence, we propose that optimizing the interfacial distance combined with the actual interfacial energy offset of a given heterosystem is important to develop its best photovoltaic performance.

Subgap Absorption in Organic Semiconductors

Organic semiconductors have found a broad range of application in areas such as light emission, photovoltaics, and optoelectronics. The active components in such devices are based on molecular and polymeric organic semiconductors, where the density of states is generally determined by the disordered nature of the molecular solid rather than energy bands. Inevitably, there exist states within the energy gap which may include tail states, deep traps caused by unavoidable impurities and defects, as well as intermolecular states due to (radiative) charge transfer states. In this Perspective, we first summarize methods to determine the absorption features due to the subgap states. We then explain how subgap states can be parametrized based upon the subgap spectral line shapes. We finally describe the role of subgap states in the performance metrics of organic semiconductor devices from a thermodynamic viewpoint.

Molecular orientation-dependent energetic shifts in solution-processed non-fullerene acceptors and their impact on organic photovoltaic performance

The non-fullerene acceptors (NFAs) employed in state-of-art organic photovoltaics (OPVs) often exhibit strong quadrupole moments which can strongly impact on material energetics. Herein, we show that changing the orientation of Y6, a prototypical NFA, from face-on to more edge-on by using different processing solvents causes a significant energetic shift of up to 210 meV. The impact of this energetic shift on OPV performance is investigated in both bilayer and bulk-heterojunction (BHJ) devices with PM6 polymer donor. The device electronic bandgap and the rate of non-geminate recombination are found to depend on the Y6 orientation in both bilayer and BHJ devices, attributed to the quadrupole moment-induced band bending. Analogous energetic shifts are also observed in other common polymer/NFA blends, which correlates well with NFA quadrupole moments. This work demonstrates the key impact of NFA quadruple moments and molecular orientation on material energetics and thereby on the efficiency of high-performance OPVs.

Organic photovoltaics: The current challenges

Organic photovoltaics are remarkably close to reaching a landmark power conversion efficiency of 20%. Given the current urgent concerns regarding climate change, research into renewable energy solutions is crucially important. In this perspective article, we highlight several key aspects of organic photovoltaics, ranging from fundamental understanding to implementation, that need to be addressed to ensure the success of this promising technology. We cover the intriguing ability of some acceptors to undergo efficient charge photogeneration in the absence of an energetic driving force and the effects of the resulting state hybridization. We explore one of the primary loss mechanisms of organic photovoltaics-non-radiative voltage losses-and the influence of the energy gap law. Triplet states are becoming increasingly relevant owing to their presence in even the most efficient non-fullerene blends, and we assess their role as both a loss mechanism and a potential strategy to enhance efficiency. Finally, two ways in which the implementation of organic photovoltaics can be simplified are addressed. The standard bulk heterojunction architecture could be superseded by either single material photovoltaics or sequentially deposited heterojunctions, and the attributes of both are considered. While several important challenges still lie ahead for organic photovoltaics, their future is, indeed, bright.

A Nitroxide Radical Conjugated Polymer as an Additive to Reduce Nonradiative Energy Loss in Organic Solar Cells

Nonfullerene-acceptor-based organic solar cells (NFA-OSCs) are now set off to the 20% power conversion efficiency milestone. To achieve this, minimizing all loss channels, including nonradiative photovoltage losses, seems a necessity. Nonradiative recombination, to a great extent, is known to be an inherent material property due to vibrationally induced decay of charge-transfer (CT) states or their back electron transfer to the triplet excitons. Herein, it is shown that the use of a new conjugated nitroxide radical polymer with 2,2,6,6-tetramethyl piperidine-1-oxyl side groups (GDTA) as an additive results in an improvement of the photovoltaic performance of NFA-OSCs based on different active layer materials. Upon the addition of GDTA, the open-circuit voltage (V_OC ), fill factor (FF), and short-circuit current density (J_SC ) improve simultaneously. This approach is applied to several material systems including state-of-the-art donor/acceptor pairs showing improvement from 15.8% to 17.6% (in the case of PM6:Y6) and from 17.5% to 18.3% (for PM6:BTP-eC9). Then, the possible reasons behind the observed improvements are discussed. The results point toward the suppression of the CT state to triplet excitons loss channel. This work presents a facile, promising, and generic approach to further improve the performance of NFA-OSCs.