Atom Transfer Radical Polymerization (ATRP): Current Status and Future Perspectives

Radical Polymerization by Heterogeneous Ceria Nanocatalysts

Heterogeneous catalysts for radical polymerization are desired due to advantageous recyclability, which facilitates further purification and various applications. Herein, colloidal ceria (CeO2) nanocrystals function as an efficient heterogeneous catalyst driving radical polymerization of methyl methacrylate (MMA). Enrichment of Ce3+ is observed on the CeO2 surface upon polymerization, revealing a surface-mediated redox mechanism underpinned by the reversible formation of oxygen defects. The heterogeneous polymerization pathway is further extended to the preparation of SiO2-grafted-PMMA particle brushes, which demonstrates the potential to access polymeric composite materials. The study provides an effective heterogeneous route to catalyzing radical polymerization that has been routinely realized with homogeneous catalysis. A wider scope of reducible metal oxides is anticipated to be explored, where compelling recyclability and tunable reactivities can be attained.

Structural Regulation of Three-Dimensional Covalent Organic Frameworks for Efficient Photoredox Catalysis toward Atom Transfer Radical Polymerization

Covalent organic frameworks (COFs) have emerged as a thriving class of photocatalysts in various chemical transformations. However, the utilization of COFs as photoredox catalysts for atom transfer radical polymerization is rarely known. Herein, we designed and synthesized a series of phenazine-based functional 3D COFs with the dia topology. Structural regulation over interpenetration folds and energy levels of COFs was implemented through the substituent effects. These COFs can work as effective photoredox catalysts toward atom transfer radical polymerization. Notably, DADP-CF3-COF with trifluoromethyl group exhibits much higher catalytic activity than other COFs, allowing the efficient synthesis of polymers with controllable molecular weights, low dispersity, and high conversion. This work not merely realizes the structural regulation of 3D COFs through substituent effects, but also exhibits brilliant prospects for the utilization of COFs as efficient catalysts in a bunch of challenging chemical transformations.

Unraveling the Roles of Amines in Atom Transfer Radical Polymerization in the Dark

Multidentate amines have been widely used as ligands (L) for Cu-catalysts in atom transfer radical polymerization (ATRP) and as electron donors in photochemically induced polymerizations. However, mechanistic aspects of the role of amines in ATRP in the dark have remained elusive. Herein, the structure-activity relationship and the related electron transfer reactions with Br-CuII/L complexes and/or with alkyl bromides (R-Br) were investigated for 25 amines. Amines function as electron donors and reducing agents for Br-CuII/L complexes via an outer sphere electron transfer (OSET) mechanism, enabling slow but continuous generation of CuI/L activators and inducing controlled ATRP. However, two amines, diazabicyclo(5.4.0)undec-7-ene (DBU) and 1,1,3,3-tetramethylguanidine (TMG), reduced Br-CuII/L faster, suggesting an inner sphere electron transfer (ISET) process. ATRP, starting with initial deactivators (Br-CuII/L) species, proceeded in the dark in the presence of an excess of tertiary amines, such as tris[2-(dimethylamino)ethyl]amine (Me6TREN), 1,4-diazabicyclo[2.2.2]octane (DABCO), and TMG at room temperature and afforded polymers with low dispersities (Đ ≤ 1.15). With copper(II) triflate complex (CuII/L+2, -(OTf)2), which has a more positive reduction potential, ATRP proceeded at room temperature with several inexpensive secondary and tertiary amines including triethylamine (TEA) and dimethylethanolamine (DMAE). Interestingly, multidentate amines also served as direct R-Br activators at elevated temperatures (60 °C). In all cases, chains were initiated with R-Br and not by the amine radical cations as byproducts of electron transfer. Amines also enabled ATRP in the presence of residual air in flasks with a large headspace, underpinning them as a robust and accessible reducing agent for practical applications.

Unravelling the effect of side chain on RAFT depolymerization; identifying the rate determining step

Reversible addition-fragmentation chain-transfer (RAFT) depolymerization represents an attractive and low-temperature chemical recycling methodology enabling the near-quantitative regeneration of pristine monomer. Yet, several mechanistic aspects of the process remain elusive. Herein, we shine a light on the RAFT depolymerization mechanism by elucidating the effect of pendant side chains on the depolymerization kinetics. A systematic increase of the number of carbons on the side chain, or the number of ethylene glycol units, revealed a significant rate acceleration. Notably, radical initiator addition during the depolymerization of poly(methyl methacrylate) and poly(hexyl methacrylate) resulted in rate equilibration, indicating that chain activation is the rate-determining step in RAFT depolymerization. Moreover, incorporation of a low DP of hexyl monomer as the second block of poly(methyl methacrylate) led to comparable rates with poly(hexyl methacrylate) homopolymer, confirming the rate determining step. Computational investigations further corroborate this finding, revealing that chain-end fragmentation is energetically more favorable in longer-side-chain methacrylates, which accounts for the experimentally observed rate acceleration. These insights not only deepen our understanding of depolymerization but also pave the way for developing more efficient and customizable depolymerization systems.

Site-Specific Polymer-Protein-Polymer Conjugates for the Preparation of Dual Responsive Multilayer Nanoparticles

Protein-polymer-based materials demonstrate high potential in advanced applications. However, controlled combinations of multiple proteins and polymers to obtain multimaterial systems is limited due to the complexity of retaining protein structure and function and achieving high structural control for the polymers simultaneously. Here, the first combination of a rebridging agent and thiol-induced, light-activated controlled radical polymerization (TIRP) is introduced to directly enable site-specific conjugation of two different polymers to native proteins. Specifically, poly(N-isopropyacrylamide) (pNIPAM) is attached to bovine serum albumin (BSA), followed by incorporation of a new rebridging agent, and initiating a second TIRP to introduce a glycopolymer, giving highly defined pNIPAM-BSA-glycopolymer conjugates. Above the lower critical solution temperature (LCST), nanoparticles with a glycopolymer corona are formed. The addition of a glycan-specific lectin leads to the formation of a second protein corona and so-called multilayer nanoparticles. Depending on the sequence of stimuli, the particles can either undergo a step-wise or one-step disassembly. Furthermore, by controlling the ratio of binding/non-binding glycopolymers in the multilayer nanoparticles, either distinct nanoparticles or large clusters can be formed. Thus, dual-responsive multilayered polymer-protein nanoparticles are now accessible with controlled and programmable material properties such as assembly and disassembly while maintaining the protein's native structure and thus function.

Recyclable Nano Zero-Valent Iron (nZVI)-Catalyst-Mediated Sustainable Photopolymerization of Glycidyl Methacrylate in Ionic Liquid and Functional Copolymers Thereof

Utilization of reusable catalysts and reaction media has recently been an area of interest to devise a sustainable approach. Interestingly, photoinduced reversible deactivation radical polymerization (photoRDRP) of glycidyl methacrylate (GMA) is achieved with reusable and magnetically separable nano zero-valent Iron (nZVI). This resulted in well-defined poly(glycidyl methacrylate) (PGMA) (upto 22700 g mol-1) with a low dispersity (Đ ≤ 1.20). Using an ionic liquid and a straightforward low-cost technique, three different copolymers: poly(glycidyl methacrylate-random-dimethyl amino ethyl methacrylate) poly(GMA-r-DMAEMA), poly(glycidyl methacrylate-random-methyl methacrylate) poly(GMA-r-MMA) and poly(glycidyl methacrylate-random-styrene) poly(GMA-r-St) are produced, all without the need for traditional photoinitiators. The response of the poly(GMA-r-DMAEMA) to pH variations is evaluated.

Polystyrene-Br End-Group Modification via Electrolysis: Adjusting Hydrogenation vs Coupling Selectivity

Atom transfer radical polymerization (ATRP) enables the precise synthesis of polymers with well-defined architectures, controlled molecular weights, and low dispersity. However, the halogen end-groups inherent to ATRP polymers can pose challenges due to their chemical reactivity and thermal instability. To address these issues, various strategies, including chemical and photochemical methods, have been developed for chain-end modification. This study introduces an electrochemical approach to selectively reduce halogen end-groups in ATRP polymers. Using glassy carbon (GC) and silver electrodes, the reductive cleavage of C-Br in bromine-capped polystyrene was investigated. Cyclic voltammetry revealed that polystyrene-bromide undergoes electron transfer accompanied by the concerted removal of the C-Br functionality. The Ag electrode facilitated electrocatalysis with enhanced activity. Controlled-potential electrolysis demonstrated that reaction conditions, particularly the choice of proton donors, significantly influence product distribution, enabling selective hydrogenation or dimerization of polystyrene-bromide chain ends. This work advances the understanding of electrochemical strategies for tailoring polymer end-group functionality.

Biosurfactants: A review of different strategies for economical production, their applications and recent advancements

Biosurfactants are biodegradable, non-toxic, and environmentally beneficial substances that are produced by microorganisms. Due to their chemical characteristics and stability in various environmental circumstances, biosurfactants are low-molecular-weight, surface-active molecules of great industrial importance. The choice of the producer microbe, kind of substrate, and purification technique determine the chemistry of a biosurfactant and its production cost. Biosurfactants' amphiphilic nature has proven to be quite advantageous, allowing them to disperse onto two immiscible surfaces while lowering the interfacial surface tension and boosting the solubility of hydrophobic substances. Microbial surfactants are replacing their chemical counterparts in research and usage because of their low or non-toxic nature, durability at higher temperatures, capacity to endure wide range of pH variations and degrade naturally. Biosurfactants are often used as anti-adhesives, emulsifying/de-emulsifying agents, spreading agents, foaming agents, and detergents that have significance in a range of industries such as agriculture, biomedical, bioremediation, the manufacturing industry, and cosmetic. Recent advancements in biosurfactant production have enhanced its usefulness and research interest in a circular economy framework. These advancements include the use of alternative substrates, including various forms of organic waste and solid-state fermentation. Here, we attempted a comprehensive review of biosurfactants, their usage, latest research, limitations, and future aspects.

Acid-Enhanced Photoiniferter Polymerization under Visible Light

Photoiniferter (PI) is a promising polymerization methodology, often used to overcome restrictions posed by thermal reversible addition-fragmentation chain-transfer (RAFT) polymerization. However, in the overwhelming majority of reports, high energy UV irradiation is required to effectively trigger photolysis of RAFT agents and facilitate the polymerization, significantly limiting its potential, scope, and applicability. Although visible light PI has emerged as a highly attractive alternative, most current approaches are limited to the synthesis of lower molecular weight polymers (i.e. 10,000 g/mol), and typically suffer from prolonged reaction times, extended induction periods, and higher dispersities when high activity CTAs (photoiniferters), such as trithiocarbonates, are employed. Herein, an acid-enhanced PI polymerization is introduced that efficiently operates under visible light irradiation. The presence of small amounts of biocompatible citric acid fully eliminates the lengthy induction period (21 hours) by enhancing photolysis, rapidly consuming the CTA, and accelerating the reaction rate, yielding polymers with narrow molar mass distributions (Ð ~1.1), near-quantitative conversions (>97 %), and high end-group fidelity in just two hours. A particularly noteworthy aspect of this work is the possibility to target very high degrees of polymerization (i.e. DP=3,000) within short timescales (i.e. less than five hours) without compromising the control over the dispersity (Ð ~1.1). The versatility of the technique is further demonstrated through the synthesis of well-defined diblock copolymers and its compatibility to various polymer classes (i.e. acrylamides, acrylates, methacrylates), thus establishing visible-light PI as a robust tool for polymer synthesis.

Polyethylene-poly(methyl acrylate) Block Copolymers from PACE-SARA ATRP: Utilizing Polyolefin Active Ester Exchange-Based Macroinitiators in Atom Transfer Radical Polymerization

Accessing a facile pathway to prepare polyolefin-polar block copolymers with low dispersity and high control remains a challenge due to the distinct polymerization pathways of the composing blocks. This study utilized the polyolefin active ester exchange, the PACE approach, as a viable solution. The PACE approach, using palladium-catalyst-based coordination-insertion polymerization, was combined with SARA ATRP (supplemental activator/reducing agent atom transfer radical polymerization). A single-chain-end active ester functionalized polyethylene (PE) was produced from an α-diimine Pd(II) hexafluoroisopropyl ester chelate complex, which facilitated a living polymerization of ethylene. Transesterification with 2-hydroxyethyl α-bromoisobutyrate (HOBIB) or 2-hydroxyethyl α-bromoisobutyramide (HOBIBA) formed α-bromoisobutyrate or α-bromoisobutyramide chain-end-functionalized polyethylene. The approach resulted in controlled synthesis of polymers with low dispersity (Đ), high initiation efficiency, and high reproducibility. Both the amide-linked and ester-linked macroinitiators showed >90% initiation efficiency and Đ values of block copolymers as low as 1.05. This work demonstrated a successful combination of two living polymerization techniques, an insertion and controlled radical polymerization, unified in PACE-SARA ATRP, offering access to polyolefin-containing block copolymers with chemically distinct structures.

Polyzwitterions: controlled synthesis, soft materials and applications

Polyzwitterions refer to polymers containing both positive and negative charged groups in one side chain, which have shown unique physicochemical properties and significant potential in diverse applications due to their amphiphilic and net-neutral charged properties. This review aims to highlight the recent advances in the design and synthesis of polyzwitterions including direct polymerization of zwitterionic monomers and deionization of polymers. Furthermore, the formation of polyzwitterion based soft materials such as nanoparticles by self-assembly, hydrogels, coatings and polyzwitterion brushes, as well as the influence of the microstructure on their properties and applications are discussed. The potential applications of polyzwitterions in drug delivery, antifouling, lubrication, energy storage and antibacterial are also summarized. Finally, the prospects of polyzwitterions are proposed.

Enhanced Protein Immobilization Capacity through Grafting of Poly(sodium methacrylate) onto Magnetic Bead Surface

This study aims to improve the signal-to-noise ratio (SNR) of chemiluminescence immunoassay (CLIA) by increasing the amount of protein immobilized on the surface of the magnetic bead (MB). Proteins are macromolecules with three-dimensional structures, and merely increasing the density of functional groups on the two-dimensional surface of the MB cannot significantly enhance protein immobilization. Therefore, we grafted spatially extended functional polymer to not only increase the density of functional groups on the MB surface but also expand their distribution in three-dimensional space, ultimately increasing protein immobilization. We synthesized poly(sodium methacrylate) (P-COONa) using atom transfer radical polymerization (ATRP) and examined its grafting density and behavior on the MB surface via nuclear magnetic resonance (NMR). Dynamic light scattering (DLS) results showed that grafting P-COONa increased the hydrodynamic radius of MBs, indicating its spatial extension. Next, we investigated the effect of P-COONa grafting on the immobilization of bovine serum albumin (BSA). Experimental results demonstrated that P-COONa grafting increased BSA immobilization from 19.9 to 42.92 mg/g. Finally, we evaluated the impact of P-COONa grafting on the SNR by detecting the D-dimer biomarker using CLIA. The results indicated that P-COONa grafting increased the low-value-to-background and high-value-to-background ratios by 4.21× and 17.17×, respectively. This study demonstrates that grafting spatially extended P-COONa increases protein immobilization on the MB surface, significantly improving the SNR of CLIA.

Synthesis of Polymers via Cancer Cell Metabolism-Mediated Controlled Radical Polymerization and Application in Engineering of Cell Surface

In this study, we present a novel chemical biology strategy that leverages the reductive metabolic pathways of cancer cells to develop a new approach for synthesizing polymers in nonstrictly anaerobic conditions. This method utilizes the reductive metabolism of cancer cells to reduce Cu(II) to Cu(I), enabling Cu(I)-catalyzed controlled radical polymerization with poly(ethylene glycol) methyl ether methacrylate (MAPEGOMe) monomer, producing polymers with low dispersity (1.28-1.38). Furthermore, we found that this method could use MAPEGOMe as a monomer to in situ form a polymer layer on the initiator-modified cell surface, achieving a cell surface engineering modification. This study reveals the broad application value and potential of cancer cell metabolism-mediated controlled radical polymerization in the fields of chemical biology and polymer science.

Radical Ring-Opening Polymerization: Unlocking the Potential of Vinyl Polymers for Drug Delivery, Tissue Engineering, and More

Synthetic vinyl polymers have long been recognized for their potential to be utilized in drug delivery, tissue engineering, and other biomedical applications. The synthetic control that chemists have over their structure and properties is unmatched, allowing vinyl polymer-based materials to be precisely engineered for a range of therapeutic applications. Yet, their lack of biodegradability compromises the biocompatibility of vinyl polymers and has held back their translation into clinically used treatments for disease thus far. In recent years, radical ring-opening polymerization (rROP) has emerged as a promising strategy to render synthetic vinyl polymers biodegradable and bioresorbable. While rROP has long been touted as a strategy for preparing biodegradable vinyl polymers for biomedical applications, the translation of rROP into clinically approved treatments for disease has not yet been realized. This review highlights the opportunities for leveraging rROP to render vinyl polymers biodegradable and unlock their potential for use in biomedical applications.

Uniform Polymer Microspheres by Photoinduced Metal-Free Atom Transfer Radical Precipitation Polymerization

Herein, a photoinduced method is introduced for the synthesis of highly cross-linked and uniform polymer microspheres by atom transfer radical polymerization (ATRP) at room temperature and in the absence of stabilizers or surfactants. Uniform particles are obtained at monomer concentrations as high as 10% (by volume), with polymers being exempt from contamination by residual transition metal catalysts, thereby overcoming the two major longstanding problems associated with thermally initiated ATRP-mediated precipitation polymerization. Moreover, the obtained particles have also immobilized ATRP initiators on their surface, which directly enables the controlled growth of densely grafted polymer layers with adjustable thickness and a well-defined chemical composition. The method is then employed successfully for the synthesis of molecularly imprinted polymer microspheres.

Isolation of Polyethylene Glycol with Larger Molecular Weights via Metal-Organic Frameworks

Polymer products typically present as mixtures with a range of molecular weights, which notably influence the expression of their properties. In this study, a technique is proposed to separate polyethylene glycol (PEG) mixtures of varying molecular weights using metal-organic frameworks (MOFs), thereby narrowing down their molecular weight distribution. Due to the hydrogen bond interactions between PEG and -OH groups in the pores of NU-1000, NU-1000 can selectively adsorb PEG with larger molecular weights from PEG mixture. This separation method consistently yields with narrower molecular weight distribution across multiple cycles. This is the first application of MOFs in regulating the dispersity (Ð) of polymers in solution, providing a novel approach for separating and purifying mixed molecular weight polymers.

A streamlined proximity extension assay using POEGMA polymer-coated magnetic beads for enhanced protein detection

The detection of protein biomarkers presenting at low concentrations in biological fluids is essential for disease diagnosis and therapeutic monitoring. While magnetic beads-based solid-phase immunoassays have shown promise in achieving high sensitivity for detecting low-abundance proteins, existing protocols suffer from limitations such as the cumbersome need for bead blocking and washing steps to minimize adsorption of non-specific biomolecules. These extra requirements lead to increased assay complexity and the risk of procedural errors. In this study, we present a streamlined magnetic proximity extension assay (MagPEA) using poly (oligo (ethylene glycol) methacrylate) (POEGMA)-coated beads. The polymer brush on bead surface, on the one hand, provides an effective mechanism for repelling non-specifically bound biomolecules that contribute to background signal generation without performing any bead blocking and washing steps. On the other hand, it facilitates the immobilization of capture antibodies on bead surface by simply embedding the antibodies onto the porous polymer under vacuum. Using the human inflammatory factor IL-8 as a demonstration, we show that the incorporation of POEGMA beads into MagPEA workflow significantly simplifies assay procedure while maintains high sensitivity.

Artificial Zymogen Based on Protein-Polymer Hybrids

This study explores the synthesis and application of artificial zymogens using protein-polymer hybrids to mimic the controlled enzyme activation observed in natural zymogens. Pro-trypsin (pro-TR) and pro-chymotrypsin (pro-CT) hybrids were engineered by modifying the surfaces of trypsin (TR) and chymotrypsin (CT) with cleavable peptide inhibitors utilizing surface-initiated atom transfer radical polymerization. These hybrids exhibited 70 and 90% reductions in catalytic efficiency for pro-TR and pro-CT, respectively, due to the inhibitory effect of the grafted peptide inhibitors. The activation of pro-TR by CT and pro-CT by TR resulted in 1.5- and 2.5-fold increases in enzymatic activity, respectively. Furthermore, the activated hybrids triggered an enzyme activation cascade, enabling amplification of activity through a dual pro-protease hybrid system. This study highlights the potential of artificial zymogens for therapeutic interventions and biodetection platforms by harnessing enzyme activation cascades for precise control of catalytic activity.

Individual cell modification with cell surface specific atom transfer radical polymerization for enhanced Cr(VI) removal

Modifying cells with polymers on the surface can enable them to gain or enhance function with various applications, wherein the atom transfer radical polymerization (ATRP) has garnered significant potential due to its biocompatibility. However, specifically initiating ATRP from the cell surface for in-situ modification remains challenging. This study established a bacterial surface-initiated ATRP method and further applied it for enhanced Cr(VI) removal. The cell surface specificity was facilely achieved by cell surface labelling with azide substrates, following alkynyl ATRP initiator specifically anchoring with azide-alkyne click chemistry. Then, the ATRP polymerization was initiated from the cell surface, and different polymers were successfully applied to in-situ modification. Further analysis revealed that the modification of Shewanella oneidensis with poly (4-vinyl pyridine) and sodium polymethacrylate improved the heavy metal tolerance and enhanced the Cr(VI) removal rate of 2.6 times from 0.088 h-1 to 0.314 h-1. This work provided a novel idea for bacterial surface modification and would extend the application of ATRP in bioremediation.

ATRP with ppb Concentrations of Photocatalysts

In atom transfer radical polymerization (ATRP), dormant alkyl halides are intermittently activated to form growing radicals in the presence of a CuI/L/X-CuII/L (activator/deactivator) catalytic system. Recently developed very active copper complexes could decrease the catalyst concentration to ppm level. However, unavoidable radical termination results in irreversible oxidation of the activator to the deactivator species, leading to limited monomer conversions. Therefore, successful ATRP at a low catalyst loading requires continuous regeneration of the activators. Such a regenerative ATRP can be performed with various reducing agents under milder reaction conditions and with catalyst concentrations diminished in comparison to conventional ATRP. Photoinduced ATRP (PhotoATRP) is one of the most efficient methods of activator regeneration. It initially employed UV irradiation to reduce the air-stable excited X-CuII/L deactivators to the activators in the presence of sacrificial electron donors. Photocatalysts (PCs) can be excited after absorbing light at longer wavelengths and, due to their favorable redox potentials, can reduce X-CuII/L to CuI/L. Herein, we present the application of three commercially available xanthene dyes as ATRP PCs: rose bengal (RB), rhodamine B (RD), and rhodamine 6G (RD-6G). Even at very low Cu catalyst concentrations (50 ppm), they successfully controlled PhotoATRP. Well-defined polymers with preserved livingness were prepared under green LED irradiation, with subppm concentrations ([PC] ≥ 10 ppb) of RB and RD-6G or 5 ppm of RD. Interestingly, these PCs efficiently controlled ATRP at wavelengths longer than their absorption maxima but required higher loadings. Polymerizations proceeded with high initiation efficiencies, yielding polymers with narrow molecular weight distributions and high chain-end fidelity. UV-vis, fluorescence, and laser flash photolysis studies helped to elucidate the mechanism of the processes involved in the dual-catalytic systems, comprising parts per million of Cu complexes and parts per billion of PCs.

One Reaction: Two Types of Mechanism-SARA-ATRP and SET-LRP-for MMA Polymerization in the Presence of PVC

This study presents for the first time the polymerization of methyl methacrylate (MMA) in the presence of poly(vinyl chloride) (PVC) that takes place by both SARA-ATRP and SET-LRP mechanisms. The two types of polymerizations that occur in the system are PMMA grafting to the PVC backbone and the formation of a new PMMA polymer, both occurring in the presence of a Cu0wire. The polymerizations were controlled as confirmed by the molecular weight evolution, polymerization kinetics, and variations in the dispersity value. The MMA polymerization in the presence of PVC at 60 and 70 °C leads to the formation of two polymer species characterized by an increase in the molecular weight with the conversion and a narrowing of the dispersity value with the reaction progress. To increase the degree of control over the polymerization, the same reaction was performed at room temperature, which allowed us to highlight the presence of the SARA-ATRP and SET-LRP mechanisms via subsequent polymer chain extensions. The results demonstrated that PMMA grafting on PVC polymers follows a SARA-ATRP mechanism, while the formation of a PMMA homopolymer entails a SET-LRP process. The influence of solvent nature on the polymerization reaction was studied by performing the grafting of N-isopropylacrylamide (NIPAM) onto the surface of PVC particles in aqueous media in the presence and in the absence of CuCl2. The polymerization reactions and the obtained materials were studied by gel permeation chromatography (GPC), 1H NMR, DMA, scanning electron microscopy (SEM), and atomic force microscopy (AFM).

Monomer Composition as a Mechanism to Control the Self-Assembly of Diblock Oligomeric Peptide-Polymer Amphiphiles

Diblock oligomeric peptide-polymer amphiphiles (PPAs) are biohybrid materials that offer versatile functionality by integrating the sequence-dependent properties of peptides with the synthetic versatility of polymers. Despite their potential as biocompatible materials, the rational design of PPAs for assembly into multichain nanoparticles remains challenging due to the complex intra- and intermolecular interactions emanating from the polymer and peptide segments. To systematically explore the impact of monomer composition on nanoparticle assembly, PPAs were synthesized with a random coil peptide (XTEN2) and oligomeric alkyl acrylates with different side chains: ethyl, tert-butyl, n-butyl, and cyclohexyl. Experimental characterization using electron and atomic force microscopies demonstrated that the tail hydrophobicity impacted accessible morphologies. Moreover, the characterization of different assembly protocols (i.e., bath sonication and thermal annealing) revealed that certain tail compositions provide access to kinetically trapped assemblies. All-atom molecular dynamics simulations of micelle formation unveiled key interactions and differences in core hydration, dictating the PPA assembly behavior. These findings highlight the complexity of PPA assembly dynamics and serve as valuable benchmarks to guide the design of PPAs for a variety of applications, including catalysis, mineralization, targeted sequestration, antimicrobial activity, and cargo transportation.

Closed-loop recyclable polymers: from monomer and polymer design to the polymerization-depolymerization cycle

The extensive utilization of plastic, as a symbol of modern technological society, has consumed enormous amounts of finite and non-renewable fossil resources and produced huge amounts of plastic wastes in the land or ocean, and thus recycling and reuse of the plastic wastes have great ecological and economic benefits. Closed-loop recyclable polymers with inherent recyclability can be readily depolymerized into monomers with high selectivity and purity and repolymerized into polymers with the same performance. They are deemed to be the next generation of recyclable polymers and have captured great and increasing attention from academia and industry. Herein, we provide an overview of readily closed-loop recyclable polymers based on monomer and polymer design and no-other-reactant-involved reversible ring-opening and addition polymerization reactions. The state-of-the-art of circular polymers is separately summarized and discussed based on different monomers, including lactones, thiolactones, cyclic carbonates, hindered olefins, cycloolefins, thermally labile olefin comonomers, cyclic disulfides, cyclic (dithio) acetals, lactams, Diels-Alder addition monomers, Michael addition monomers, anhydride-secondary amide monomers, and cyclic anhydride-aldehyde monomers, and polymers with activatable end groups. The polymerization and depolymerization mechanisms are clearly disclosed, and the evolution of the monomer structure, the polymerization and depolymerization conditions, the corresponding polymerization yield, molecular weight, performance of the polymers, monomer recovery, and depolymerization equipment are also systematically summarized and discussed. Furthermore, the challenges and future prospects are also highlighted.

Group transfer radical polymerization for the preparation of carbon-chain poly(α-olefins)

Radical polymerization is a powerful technique for producing a variety of polymeric materials. However, the chain transfer reaction impedes the formation of polymers from many common α-olefins such as propene and 1-butene using this method. Consequently, poly(α-olefins) are predominantly produced via coordination polymerization. To address this limitation, we have devised a strategy involving group transfer radical polymerization (GTRP) to facilitate the radical homopolymerization to access carbon-chain poly(α-olefins). This approach enables the precise construction of a diverse array of carbon-chain poly(α-olefins) with high molecular weights. Furthermore, by using nonconventional monomers, we extend the applicability of this technique to the copolymerization of α-olefins with acrylonitrile, paving the way for the synthesis of copolymers with different monomers. To investigate the properties of the polymers obtained by this method, one of the poly(α-olefins) is studied as an interphase layer material in anode-free Li metal batteries, and the results indicate the potential of the polymer in energy storage applications.

Defluorinative Haloalkylation of Unactivated Alkenes Enabled by Dual Photoredox and Copper Catalysis

A three-component defluorinative haloalkylation of alkenes with trifluoromethyl compounds and TBAX (X = Cl, Br) via dual photoredox/copper catalysis is reported. The mild conditions are compatible with a wide array of activated trifluoromethyl aromatics bearing diverse substituents, and various nonactivated terminal and internal alkenes, enabling straightforward access to synthetically valuable γ-gem-difluoroalkyl halides with high efficiency. Mechanistic studies indicate that the [Cu] complexes not only serve as XAT catalysts but also facilitate the SET reduction of trifluoromethyl groups by photocatalysts. Additionally, the resulting alkyl halide products can serve as versatile conversion intermediates for the synthesis of a diverse range of γ-gem-difluoroalkyl compounds.

Thiol-selective native grafting from polymerization for the generation of protein-polymer conjugates

Protein-polymer conjugates combine properties of biopolymers and synthetic polymers, such as specific bioactivity and increased stability, with great benefits for various applications from catalysis to biomedicine. Furthermore, polymer conjugation can mimic important posttranslational modifications of proteins such as glycosylation. There are typically two approaches to create protein-polymer conjugates: the protein is functionalized in advance with an initiator for a grafting-from method or a previously produced polymer is conjugated to the protein via a grafting-to method. In this study, we present a new approach that uses native proteins and allows for direct grafting-from using a thiol-induced, light-activated controlled radical polymerization (TIRP) that is initiated at thiols from specific cysteine residues of the protein. This straightforward method is employed to introduce polymers onto proteins and enzymes without any prior protein modifications, it works in aqueous buffer and maintains the protein's native structure and activity. The resulting protein-polymer conjugates exhibit high molar masses and low dispersities. We demonstrate the versatility of this approach by introducing different types of polymers such as hydrophilic poly(2-hydroxyethyl acrylate) (pHEAA), temperature-responsive poly(N-isopropylacrylamide) (pNIPAM) as well as glycopolymers mimicking the natural protein glycosylation and enabling selective interactions. We present successful combinations of the protein and polymer functions e.g., temperature-induced aggregation leading to an increase in enzyme activity and the introduction of artificial glycosylation inducing specific protein-protein cluster formation and giving straightforward access to glycosurfaces. Based on this straightforward, potentially scalable yet highly controlled synthesis of protein-polymer conjugates, various areas of applications are envisioned ranging from biomedicine to material sciences.

Cu-Catalyzed Three-Component Alkene Carboamination: Mechanistic Insights and Rational Design to Overcome Limitations

Herein, we report mechanistic investigations into the Cu-catalyzed three-component carboamination of alkenes with α-halo carbonyls and aryl amines via an oxocarbenium intermediate. Monitoring the reaction reveals the formation of transient atom transfer radical addition (ATRA) intermediates with both electron-neutral and deficient vinyl arenes as well as unactivated alkenes. Based on our experimental studies and density functional theory calculations, the oxocarbenium is generated through atom transfer and subsequent intramolecular substitution. Further, mechanistic factors that dictate the regioselectivity of the nucleophilic attack onto the oxocarbenium to afford the γ-amino ester, γ-iminolactone, or γ-lactone are discussed. A strategy to overcome scope limitation with respect to unactivated alkenes is developed using the mechanistic insights gained herein. Finally, we demonstrate that under modified conditions, our Cu catalyst enables the ATRA reaction between a variety of alkyl halides and vinyl arenes/α-olefins, and we present a one-pot, two-step carbofunctionalization with an array of nucleophiles through ATRA/SN2.

A phosphate glass reinforced composite acrylamide gradient scaffold for osteochondral interface regeneration

The bone-cartilage interface is defined by a unique arrangement of cells and tissue matrix. Injury to the interface can contribute to the development of arthritic joint disease. Attempts to repair osteochondral damage through clinical trials have generated mixed outcomes. Tissue engineering offers the potential of integrated scaffold design with multiregional architecture to assist in tissue regeneration, such as the bone-cartilage interface. Challenges remain in joining distinct materials in a single scaffold mass while maintaining integrity and avoiding delamination. The aim of the current work is to examine the possibility of joining two closely related acrylamide derivatives such as, poly n-isopropyl acrylamide (pNIPAM) and poly n‑tert‑butyl acrylamide (pNTBAM). The target is to produce a single scaffold unit with distinct architectural regions in the favour of regenerating the osteochondral interface. Longitudinal phosphate glass fibres (PGFs) with the formula 50P2O5.30CaO.20Na2O were incorporated to provide additional bioactivity by degradation to release ions such as calcium and phosphate which are considered valuable to assist the mineralization process. Polymers were prepared via atom transfer radical polymerization (ATRP) and solutions cast to ensure the integration of polymers chains. Scaffold was characterized using scanning electron microscope (SEM) and Fourier transform infra-red (FTIR) techniques. The PGF mass degradation pattern was inspected using micro computed tomography (µCT). Biological assessment of primary human osteoblasts (hOBs) and primary human chondrocytes (hCHs) upon scaffolds was performed using alizarin red and colorimetric calcium assay for mineralization assessment; alcian blue staining and dimethyl-methylene blue (DMMB) assay for glycosaminoglycans (GAGs); immunostaining and enzyme-linked immunosorbent assay (ELISA) to detect functional proteins expression by cells such as collagen I, II, and annexin A2. FTIR analysis revealed an intact unit with gradual transformation from pNIPAM to pNTBAM. SEM images showed three distinct architectural regions with mean pore diameter of 54.5 µm (pNIPAM), 16.5 µm (pNTBAM) and 118 µm at the mixed interface. Osteogenic and mineralization potential by cells was observed upon the entire scaffold's regions. Chondrogenic activity was relevant on the pNTBAM side of the scaffold only with minimal evidence in the pNIPAM region. PGFs increased mineralization potential of both hOBs and hCHs, evidenced by elevated collagens I, X, and annexin A2 with reduction of collagen II in PGFs scaffolds. In conclusion, pNIPAM and pNTBAM integration created a multiregional scaffold with distinct architectural regions. Differential chondrogenic, osteogenic, and mineralized cell performance, in addition to the impact of PGF, suggests a potential role for phosphate glass-incorporated, acrylamide-derivative scaffolds in osteochondral interface regeneration.

Solid-Phase Synthesis of Well-Defined Multiblock Copolymers by Atom Transfer Radical Polymerization

Solid-phase polymer synthesis, historically rooted in peptide synthesis, has evolved into a powerful method for achieving sequence-controlled macromolecules. This study explores solid-phase polymer synthesis by covalently immobilizing growing polymer chains onto a poly(ethylene glycol) (PEG)-based resin, known as ChemMatrix (CM) resin. In contrast to traditional hydrophobic supports, CM resin's amphiphilic properties enable swelling in both polar and nonpolar solvents, simplifying filtration, washing, and drying processes. Combining atom transfer radical polymerization (ATRP) with solid-phase techniques allowed for the grafting of well-defined block copolymers in high yields. This approach is attractive for sequence-controlled polymer synthesis, successfully synthesizing di-, tri-, tetra-, and penta-block copolymers with excellent control over the molecular weight and dispersity. The study also delves into the limitations of achieving high molecular weights due to confinement within resin pores. Moreover, the versatility of the method is demonstrated through its applicability to various monomers in organic and aqueous media. This straightforward approach offers a rapid route to developing tailored block copolymers with unique structures and functionalities.

Optimizing Biocompatibility and Gene Delivery with DMAEA and DMAEAm: A Niacin-Derived Copolymer Approach

Gene therapy is pivotal in nanomedicine, offering a versatile approach to disease treatment. This study aims to achieve an optimal balance between biocompatibility and efficacy, which is a common challenge in the field. A copolymer library is synthesized, incorporating niacin-derived monomers 2-acrylamidoethyl nicotinate (AAEN) or 2-(acryloyloxy)ethyl nicotinate (AEN) with N,N-(dimethylamino)ethyl acrylamide (DMAEAm) or hydrolysis-labile N,N-(dimethylamino)ethyl acrylate (DMAEA). Evaluation of the polymers' cytotoxicity profiles reveals that an increase in AAEN or DMAEA molar ratios correlates with improved biocompatibility. Remarkably, an increase in AAEN in both DMAEA and DMAEAm copolymers demonstrated enhanced transfection efficiencies of plasmid DNA in HEK293T cells. Additionally, the top-performing polymers demonstrate promising gene expression in challenging-to-transfect cells (THP-1 and Jurkat cells) and show no significant effect on modulating immune response induction in ex vivo treated murine monocytes. Overall, the best performing candidates exhibit an optimal balance between biocompatibility and efficacy, showcasing potential advancements in gene therapy.

Ferrocene-Modified Polyacrylonitrile-Containing Block Copolymers as Preceramic Materials

In the pursuit of fabricating functional ceramic nanostructures, the design of preceramic functional polymers has garnered significant interest. With their easily adaptable chemical composition, molecular structure, and processing versatility, these polymers hold immense potential in this field. Our study succeeded in focusing on synthesizing ferrocene-containing block copolymers (BCPs) based on polyacrylonitrile (PAN). The synthesis is accomplished via different poly(acrylonitrile-block-methacrylate)s via atom transfer radical polymerization (ATRP) and activators regenerated by electron transfer ATRP (ARGET ATRP) for the PAN macroinitiators. The molecular weights of the BCPs range from 44 to 82 kDa with dispersities between 1.19 and 1.5 as determined by SEC measurements. The volume fraction of the PMMA block ranges from 0.16 to 0.75 as determined by NMR. The post-modification of the BCPs using 3-ferrocenyl propylamine has led to the creation of redox-responsive preceramic polymers. The thermal stabilization of the polymer film has resulted in stabilized morphologies based on the oxidative PAN chemistry. The final pyrolysis of the sacrificial block segment and conversion of the metallopolymer has led to the formation of a porous carbon network with an iron oxide functionalized surface, investigated by scanning electron microscopy (SEM), energy dispersive X-ray mapping (EDX), and powder X-ray diffraction (PXRD). These findings could have significant implications in various applications, demonstrating the practical value of our research in convenient ceramic material design.

Unusual Stability of an End-on Superoxido Copper(II) Complex under Ambient Conditions

Superoxido copper complexes play an important role as usually short-lived intermediates in biology and chemistry. The unusual stability of an end-on superoxido copper complex observed in an oxygen-enhanced atom transfer radical polymerization (ATRP) led to a detailed mechanistic investigation of the formation of [CuII(Me6tren)(O2⋅-)]+ (Me6tren=tris(2-dimethyl-aminoethyl)amine) under ambient conditions. The persistence of the superoxido copper complex could be explained by a reaction cycle including the peroxido complex [(Me6tren)2CuII 2(O2)]2+ together with [CuI(Me6tren)(DMSO)]+ and [CuII(Me6tren)(OH)]+ in the overall reaction.

Open-Air Chemical Recycling: Fully Oxygen-Tolerant ATRP Depolymerization

While oxygen-tolerant strategies have been overwhelmingly developed for controlled radical polymerizations, the low radical concentrations typically required for high monomer recovery render oxygen-tolerant solution depolymerizations particularly challenging. Here, an open-air atom transfer radical polymerization (ATRP) depolymerization is presented, whereby a small amount of a volatile cosolvent is introduced as a means to thoroughly remove oxygen. Ultrafast depolymerization (i.e., 2 min) could efficiently proceed in an open vessel, allowing a very high monomer retrieval to be achieved (i.e., ∼91% depolymerization efficiency), on par with that of the fully deoxygenated analogue. Oxygen probe studies combined with detailed depolymerization kinetics revealed the importance of the low-boiling point cosolvent in removing oxygen prior to the reaction, thus facilitating effective open-air depolymerization. The versatility of the methodology was demonstrated by performing reactions with a range of different ligands and at high polymer loadings (1 M monomer repeat unit concentration) without significantly compromising the yield. This approach provides a fully oxygen-tolerant, facile, and efficient route to chemically recycle ATRP-synthesized polymers, enabling exciting new applications.

Boron Neutron Capture Therapy Enhanced by Boronate Ester Polymer Micelles: Synthesis, Stability, and Tumor Inhibition Studies

Boron neutron capture therapy (BNCT) targets invasive, radioresistant cancers but requires a selective and high B-10 loading boron drug. This manuscript investigates boron-rich poly(ethylene glycol)-block-(poly(4-vinylphenyl boronate ester)) polymer micelles synthesized via atom transfer radical polymerization for their potential application in BNCT. Transmission electron microscopy (TEM) revealed spherical micelles with a uniform size of 43 ± 10 nm, ideal for drug delivery. Additionally, probe sonication proved effective in maintaining the micelles' size and morphology postlyophilization and reconstitution. In vitro studies with B16-F10 melanoma cells demonstrated a 38-fold increase in boron accumulation compared to the borophenylalanine drug for BNCT. In vivo studies in a B16-F10 tumor-bearing mouse model confirmed enhanced tumor selectivity and accumulation, with a tumor-to-blood (T/B) ratio of 2.5, surpassing BPA's T/B ratio of 1.8. As a result, mice treated with these micelles experienced a significant delay in tumor growth, highlighting their potential for BNCT and warranting further research.

Hydrophilic Poly(meth)acrylates by Controlled Radical Branching Polymerization: Hyperbranching and Fragmentation

Topology significantly impacts polymer properties and applications. Hyperbranched polymers (HBPs) synthesized via atom transfer radical polymerization (ATRP) using inimers typically exhibit broad molecular weight distributions and limited control over branching. Alternatively, copolymerization of inibramers (IB), such as α-chloro/bromo acrylates with vinyl monomers, yields HBPs with precise and uniform branching. Herein, we described the synthesis of hydrophilic HB polyacrylates in water by copolymerizing a water-soluble IB, oligo(ethylene oxide) methyl ether 2-bromoacrylate (OEOBA), with various hydrophilic acrylate comonomers. Visible-light-mediated controlled radical branching polymerization (CRBP) with dual catalysis using eosin Y (EY) and copper complexes resulted in HBPs with various molecular weights (M n = 38 000 to 170 000) and degrees of branching (2%-24%). Furthermore, the optimized conditions enabled the successful application of the OEOBA to synthesize linear-hyperbranched block copolymers and hyperbranched polymer protein hybrids (HB-PPH), demonstrating its potential to advance the synthesis of complex macromolecular architecture under environmentally benign conditions. Copolymerization of hydrophilic methacrylate monomer, oligo(ethylene oxide) methyl ether methacrylate (OEOMA500), and inibramer OEOBA was accompanied by fragmentation via β-carbon C-C bond scission and subsequent growth of polymer chains from the fragments. Furthermore, computational studies investigating the fragmentation depending on the IB and comonomer structure supported the experimental observations. This work expands the toolkit of water-soluble inibramers for CRBP and highlights the critical influence of the inibramer structure on reaction outcomes.

An Evolutionary Review of Hemoperfusion Adsorbents: Materials, Preparation, Functionalization, and Outlook

Accumulation of pathogenic factors in the blood may cause irreversible damage and may even be life-threatening. Hemoperfusion is an effective technique for eliminating pathogenic factors, which is widely used in the treatment of various diseases including liver failure, renal failure, sepsis, and others. Hemoperfusion adsorbents are crucial in this process as they specifically bind and remove the target pathogenic factors. This review describes the development of hemoperfusion adsorbents, detailing the different properties exhibited by inorganic materials, organic polymers, and new materials. Advances in natural and synthetic polymers and novel materials manufacturing techniques have driven the expansion of hemoperfusion adsorbents in clinical applications. Stimuli-responsive (smart responsive) adsorbents with controllable molecular binding properties have many promising and environmentally friendly biomedical applications. Knowledge gaps, future research directions, and prospects for hemoperfusion adsorbents are discussed.

Bottlebrush Networks: A Primer for Advanced Architectures

Bottlebrush networks (BBNs) are an exciting new class of materials with interesting physical properties derived from their unique architecture. While great strides have been made in our fundamental understanding of bottlebrush polymers and networks, an interdisciplinary approach is necessary for the field to accelerate advancements. This review aims to act as a primer to BBN chemistry and physics for both new and current members of the community. In addition to providing an overview of contemporary BBN synthetic methods, we developed a workflow and desktop application (LengthScale), enabling bottlebrush physics to be more approachable. We conclude by addressing several topical issues and asking a series of pointed questions to stimulate conversation within the community.

Robust Miniemulsion PhotoATRP Driven by Red and Near-Infrared Light

Photoinduced polymerization techniques have gathered significant attention due to their mild conditions, spatiotemporal control, and simple setup. In addition to homogeneous media, efforts have been made to implement photopolymerization in emulsions as a practical and greener process. However, previous photoinduced reversible deactivation radical polymerization (RDRP) in heterogeneous media has relied on short-wavelength lights, which have limited penetration depth, resulting in slow polymerization and relatively poor control. In this study, we demonstrate the first example of a highly efficient photoinduced miniemulsion ATRP in the open air driven by red or near-infrared (NIR) light. This was facilitated by the utilization of a water-soluble photocatalyst, methylene blue (MB+). Irradiation by red/NIR light allowed for efficient excitation of MB+ and subsequent photoreduction of the ATRP deactivator in the presence of water-soluble electron donors to initiate and mediate the polymerization process. The NIR light-driven miniemulsion photoATRP provided a successful synthesis of polymers with low dispersity (1.09 ≤ Đ ≤ 1.29) and quantitative conversion within an hour. This study further explored the impact of light penetration on polymerization kinetics in reactors of varying sizes and a large-scale reaction (250 mL), highlighting the advantages of longer-wavelength light, particularly NIR light, for large-scale polymerization in dispersed media owing to its superior penetration. This work opens new avenues for robust emulsion photopolymerization techniques, offering a greener and more practical approach with improved control and efficiency.

Modern Trends in Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) is a powerful and versatile technique for producing colloidal dispersions of block copolymer particles with desired morphologies. Currently, PISA can be carried out in various media, over a wide range of temperatures, and using different mechanisms. This method enables the production of biodegradable objects and particles with various functionalities and stimuli sensitivity. Consequently, PISA offers a broad spectrum of potential commercial applications. The aim of this review is to provide an overview of the current state of rational synthesis of block copolymer particles with diverse morphologies using various PISA techniques and mechanisms. The discussion begins with an examination of the main thermodynamic, kinetic, and structural aspects of block copolymer micellization, followed by an exploration of the key principles of PISA in the formation of gradient and block copolymers. The review also delves into the main mechanisms of PISA implementation and the principles governing particle morphology. Finally, the potential future developments in PISA are considered.

Polymer design via SHAP and Bayesian machine learning optimizes pDNA and CRISPR ribonucleoprotein delivery

We present the facile synthesis of a clickable polymer library with systematic variations in length, binary composition, pKa, and hydrophobicity (clog P) to optimize intracellular pDNA and CRISPR-Cas9 ribonucleoprotein (RNP) performance. We couple physicochemical characterization and machine learning to interpret quantitative structure-property relationships within the combinatorial design space. For the first time, we reveal unexpected disparate design parameters for nucleic acid carriers; via explainable machine learning on 432 formulations, we discover that lower polymer pKa and higher percentages of benzimidazole ethanethiol enhance pDNA delivery, yet polymer length and captamine cation identity improve RNP delivery. Closed-loop Bayesian optimization of 552 formulation ratios further enhances in vitro performance. The top three polymers yield a higher signal and stable transgene expression over 20 days in vivo, and a 1.7-fold enhancement over controls. Our facile coupling of synthesis, characterization, and machine analysis provides powerful tools to quantitate performance parameters accelerating next-generation vehicles for nucleic acid medicines.

Arginine-Functional Methacrylic Block Copolymer Nanoparticles: Synthesis, Characterization, and Adsorption onto a Model Planar Substrate

Recently, we reported the synthesis of a hydrophilic aldehyde-functional methacrylic polymer (Angew. Chem., 2021, 60, 12032-12037). Herein we demonstrate that such polymers can be reacted with arginine in aqueous solution to produce arginine-functional methacrylic polymers without recourse to protecting group chemistry. Careful control of the solution pH is essential to ensure regioselective imine bond formation; subsequent reductive amination leads to a hydrolytically stable amide linkage. This new protocol was used to prepare a series of arginine-functionalized diblock copolymer nanoparticles of varying size via polymerization-induced self-assembly in aqueous media. Adsorption of these cationic nanoparticles onto silica was monitored using a quartz crystal microbalance. Strong electrostatic adsorption occurred at pH 7 (Γ = 14.7 mg m-2), whereas much weaker adsorption occurred at pH 3 (Γ = 1.9 mg m-2). These findings were corroborated by electron microscopy, which indicated a surface coverage of 42% at pH 7 but only 5% at pH 3.

Designing Ionic Ir(III) Cyclometalated Complexes as Photocatalysts for Light Assisted ATRP of MMA. A Combined Experimental and Mechanistic Study

A new family of ionic Ir(III) cyclometalated complexes with general formula [Ir(CN)2(NN)][Br], was designed and prepared to be assessed as photocalysts for the visible light assisted ATRP polymerization of MMA. To this purpose, our design strategy involved both: i) the decoration of the cyclometalating (CN) and the ancillary (NN) ligands with various electron withdrawing and/or electron donor substituents and, ii) the use of Br- as the counter anion for these cationic Ir(III) species. After an extensive screening in which the [Ir(CN)2(NN)][Br]-type compounds were compared to the model neutral complex fac-[Ir(ppy)3], the "fully" amino-substituted ion pairs abbreviated as [10][Br] and [11][Br], exhibited the best photocatalytic performances under irradiation with CFL lamps. It is worth noting that the outcomes of transient absorption spectroscopy (TAS) experiments combined with theoretical DFT calculations, enlightened the role played by the Ir(III) complexes in the mechanism of the photoATRP process, and suggested the rationalization of the different performances that were highlighted by our Ir(III) catalyst in the visible light assisted photopolymerization of MMA.

Selective and Controlled Grafting from PVDF-Based Materials by Oxygen-Tolerant Green-Light-Mediated ATRP

Poly(vinylidene fluoride) (PVDF) shows excellent chemical and thermal resistance and displays high dielectric strength and unique piezoelectricity, which are enabling for applications in membranes, electric insulators, sensors, or power generators. However, its low polarity and lack of functional groups limit wider applications. While inert, PVDF has been modified by grafting polymer chains by atom transfer radical polymerization (ATRP), albeit via an unclear mechanism, given the strong C-F bonds. Herein, we applied eosin Y and green-light-mediated ATRP to modify PVDF-based materials. The method gave nearly quantitative (meth)acrylate monomer conversions within 2 h without deoxygenation and without the formation of unattached homopolymers, as confirmed by control experiments and DOSY NMR measurements. The gamma distribution model that accounts for broadly dispersed polymers in DOSY experiments was essential and serves as a powerful tool for the analysis of PVDF. The NMR analysis of poly(methyl acrylate) graft chain-ends on PVDF-CTFE (statistical copolymer with chlorotrifluoroethylene) was carried out successfully for the first time and showed up to 23 grafts per PVDF-CTFE chain. The grafting density was tunable depending on the solvent composition and light intensity during the grafting. The initiation proceeded either from the C-Cl sites of PVDF-CTFE or via unsaturations in the PVDF backbones. The dehydrofluorinated PVDF was 20 times more active than saturated PVDF during the grafting. The method was successfully applied to modify PVDF, PVDF-HFP, and Viton A401C. The obtained PVDF-CTFE-g-PnBMA materials were investigated in more detail. They featured slightly lower crystallinity than PVDF-CTFE (12-18 vs 24.3%) and had greatly improved mechanical performance: Young's moduli of up to 488 MPa, ductility of 316%, and toughness of 46 × 106 J/m3.

Chromatographic Separation: A Versatile Strategy to Prepare Discrete and Well-Defined Polymer Libraries

ConspectusThe preparation of discrete and well-defined polymers is an emerging strategy for emulating the remarkable precision achieved by macromolecular synthesis in nature. Although modern controlled polymerization techniques have unlocked access to a cornucopia of materials spanning a broad range of monomers, molecular weights, and architectures, the word "controlled" is not to be confused with "perfect". Indeed, even the highest-fidelity polymerization techniques─yielding molar mass dispersities in the vicinity of Đ = 1.05─unavoidably create a considerable degree of structural and/or compositional dispersity due to the statistical nature of chain growth. Such dispersity impacts many of the properties that researchers seek to control in the design of soft materials.The development of strategies to minimize or entirely eliminate dispersity and access molecularly precise polymers therefore remains a key contemporary challenge. While significant advances have been made in the realm of iterative synthetic methods that construct oligomers with an exact molecular weight, head-to-tail connectivity, and even stereochemistry via small-molecule organic chemistry, as the word "iterative" suggests, these techniques involve manually propagating monomers one reaction at a time, often with intervening protection and deprotection steps. As a result, these strategies are time-consuming, difficult to scale, and remain limited to lower molecular weights. The focus of this Account is on an alternative strategy that is more accessible to the general scientific community because of its simplicity, versatility, and affordability: chromatography. Researchers unfamiliar with the intricacies of synthesis may recall being exposed to chromatography in an undergraduate chemistry lab. This operationally simple, yet remarkably powerful, technique is most commonly encountered in the purification of small molecules through their selective (differential) adsorption to a column packed with a low-cost stationary phase, usually silica. Because the requisite equipment is readily available and the actual separation takes little time (on the order of 1 h), chromatography is used extensively in small-molecule chemistry throughout industry and academia alike. It is, therefore, perhaps surprising that similar types of chromatography are not more widely leveraged in the field of polymer science as well.Here, we discuss recent advances in using chromatography to control the structure and properties of polymeric materials. Emphasis is placed on the utility of an adsorption-based mechanism that separates polymers based on polarity and composition at tractable (gram) scales for materials science, in contrast to size exclusion, which is extremely common but typically analyzes very small quantities of a sample (∼1 mg) and is limited to separating by molar mass. Key concepts that are highlighted include (1) the separation of low-molecular-weight homopolymers into discrete oligomers (Đ = 1.0) with precise chain lengths and (2) the efficient fractionation of block copolymers into high-quality and widely varied libraries for accelerating materials discovery. In summary, the authors hope to convey the exciting possibilities in polymer science afforded by chromatography as a scalable, versatile, and even automated technique that unlocks new avenues of exploration into well-defined materials for a diverse assortment of researchers with different training and expertise.

Dual pH/redox-responsive hyperbranched polymeric nanocarriers with TME-trigger size shrinkage and charge reversible ability for amplified chemotherapy of breast cancer

A novel pH/redox-responsive hyperbranched MeO-PEG-b-(NIPAAm-co-PBAE) nanoparticles (NPs) were designed with size shrinkage and charge-reversible potential for targeted delivery of docetaxel (DTX) to MDA-MB-231 cell lines. In the tumor microenvironment (TME), amine protonation induces charge reversal and disulfide bond cleavage under high TME GSH concentration causing size shrinkage, improved deep tumor penetration, and active targeting of the therapeutic agents. These nano drug delivery systems (NDDSs) significantly promoted cancer cell uptake (~ 100% at 0.5 h), facilitating site-specific delivery and deep tumor penetration. The MTT assay revealed significantly higher cytotoxicity (P value < 0.0001) for DTX-loaded NPs compared to free DTX. Cell cycle analysis revealed G2/M (58.3 ± 2.1%) and S (21.5 ± 1.3%) arrest for DTX-loaded NPs, while free DTX caused G2/M (67.9 ± 1.1%) and sub-G1 (10.3 ± 0.8%) arrest. DTX-loaded NPs induced higher apoptosis (P value < 0.001) in MDA-MB-231 cells (71.5 ± 2.8%) compared to free DTX (42.3 ± 3.1%). Western blotting and RT-PCR assays confirmed significant up-regulation of protein levels and apoptotic genes by DTX-loaded NPs compared to free DTX. In conclusion, TME-responsive charge reversal and size-shrinkable smart NDDSs designed based on low pH, and high glutathione (GSH), offer more effective site-specific delivery of therapeutic agents to tumors.

Molecular Bottlebrushes as Emerging Nanocarriers: Material Design and Biomedical Application

As a unique unimolecular nanoobject, molecular bottlebrushes (MBBs) have attracted great interest from researchers in nanocarriers attributed to their defined structure, size, and shape. MBBs with various architectures have been proposed and constructed with well-defined domains for loading "cargos", including core, shell, and periphery functional groups. Compared with nanomaterials based on self-assembly, MBBs have lots of advantages, including facile synthesis, flexible compositions, favorable stability, and tunable size and shape, that make them a promising nanoplatform for various applications. This paper summarizes the recent progress during the past decade, with a focus on developments within the last five years in the synthesis of MBBs with different architectures, and uses them as nanocarriers in drug delivery, biological imaging, and other emerging applications.

Macrocyclic Copper(II) Complexes as Catalysts for Electrochemically Mediated Atom Transfer

Copper-catalyzed electrochemical atom transfer radical addition (eATRA) is a new method for the creation of new C-C bonds under mild conditions. In this work, we have explored the reactivity of an analogous series of N4 macrocyclic CuII complexes as eATRA precatalysts, which are primed by reduction to their monovalent oxidation state. These complexes were fully characterized structurally, spectroscopically, and electrochemically. A spectrum of radical activation reactivity was found across the series [CuI(Me4cyclen)(NCMe)]+ (Me4cyclen = 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecane), [CuI(Me4cyclam)(NCMe)]+ (Me4cyclam = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane), and [CuI(Me2py2clen)(NCMe)]+ (Me2py2clen = 3,7-dimethyl-3,7-diaza-1,5(2,6)-dipyridinacyclo-octaphane). The rate of radical production by [Cu(Me2py2clen)(NCMe)]+ was modest, but rapid radical capture to form the organocopper complex [CuI(Me2py2clen)(CH2CN)] led to a dramatic acceleration in catalysis, greater than seen in any comparable Cu complex, but this led to rapid radical self-termination instead of radical addition.

A Comparative Study of Cationic Copper(I) Reagents Supported by Bipodal Tetramethylguanidinyl-Containing Ligands as Nitrene-Transfer Catalysts

The bipodal compounds [(TMG2biphenN-R)CuI-NCMe](PF6) (R = Me, Ar (4-CF3Ph-)) and [(TMG2biphenN-Me)CuI-I] have been synthesized with ligands that feature a diarylmethyl- and triaryl-amine framework and superbasic tetramethylguanidinyl residues (TMG). The cationic Cu(I) sites mediate catalytic nitrene-transfer reactions between the imidoiodinane PhI = NTs (Ts = tosyl) and a panel of styrenes in MeCN, to afford aziridines, demonstrating comparable reactivity profiles. The copper reagents have been further explored to execute C-H amination reactions with a variety of aliphatic and aromatic hydrocarbons and two distinct nitrene sources PhI = NTs and PhI = NTces (Tces = 2,2,2-trichloroethylsulfamate) in benzene/HFIP (10:2 v/v). Good yields have been obtained for sec-benzylic and tert-C-H bonds of various substrates, especially with the more electron-deficient catalyst [(TMG2biphenN-Ar)CuI-NCMe](PF6). In conjunction with earlier studies, the order of reactivity of these bipodal cationic reagents as a function of the metal employed is established as Cu > Fe > Co ≥ Mn. However, as opposed to the base-metal analogues, the bipodal Cu reagents are less reactive than a similar tripodal Cu catalyst. The observed fluorophilicity of the bipodal Cu compounds may provide a deactivation pathway.

Block Copolymers of Polyolefins with Polyacrylates: Analyzing and Improving the Blocking Efficiencies Using MILRad/ATRP Approach

Despite their industrial ubiquity, polyolefin-polyacrylate block copolymers are challenging to synthesize due to the distinct polymerization pathways necessary for respective blocks. This study utilizes MILRad, metal-organic insertion light-initiated radical polymerization, to synthesize polyolefin-b-poly(methyl acrylate) copolymer by combining palladium-catalyzed insertion-coordination polymerization and atom transfer radical polymerization (ATRP). Brookhart-type Pd complexes used for the living polymerization of olefins are homolytically cleaved by blue-light irradiation, generating polyolefin-based macroradicals, which are trapped with functional nitroxide derivatives forming ATRP macroinitiators. ATRP in the presence of Cu(0), that is, supplemental activators and reducing agents , is used to polymerize methyl acrylate. An increase in the functionalization efficiency of up to 71% is demonstrated in this study by modifying the light source and optimizing the radical trapping condition. Regardless of the radical trapping efficiency, essentially quantitative chain extension of polyolefin-Br macroinitiator with acrylates is consistently demonstrated, indicating successful second block formation.

High-Throughput Synthesis, Purification, and Application of Alkyne-Functionalized Discrete Oligomers

The development of synthetic oligomers as discrete single molecular entities with accurate control over the number and nature of functional groups along the backbone has enabled a variety of new research opportunities. From fundamental studies of self-assembly in materials science to understanding efficacy and safety profiles in biology and pharmaceuticals, future directions are significantly impacted by the availability of discrete, multifunctional oligomers. However, the preparation of diverse libraries of discrete and stereospecific oligomers remains a significant challenge. We report a novel strategy for accelerating the synthesis and isolation of discrete oligomers in a high-throughput manner based on click chemistry and simplified bead-based purification. The resulting synthetic platform allows libraries of discrete polyether oligomers to be prepared and the impact of variables such as chain length, number, and nature of side chain functionalities and molecular dispersity on antibacterial behavior examined. Significantly, discrete oligomers were shown to exhibit enhanced activity with lower toxicity compared with traditional disperse samples. This work provides a practical and scalable methodology for nonexperts to prepare libraries of multifunctional discrete oligomers and demonstrates the advantages of discrete materials in biological applications.