Physiological parameters for oral delivery and in vitro testing

Incorporating the biphasic system to GIS-α Improves In vivo prediction for low solubility drugs

The gastrointestinal simulator alpha (GIS-α) is an in vivo predictive transfer dissolution method that mimics the pH changes and peristalsis in the gastrointestinal tract, factors that are necessary in the biorelevant dissolution of drugs especially those that are under the Biopharmaceutics Classification System (BCS) class II and IV. It can be used to provide increased understanding to the dissolution, precipitation, and supersaturation of various low-solubility drugs, but lacks insights on absorption. Conducting experiments in the GIS-α with a biphasic system to add an absorptive phase in the jejunal compartment increased the observed dissolution and improved the overall in vivo prediction. In this study, the objective was to evaluate the improvement of dissolution on four representative BCS class II drugs using the biphasic format in the GIS-α. A customized double paddle was also used in the jejunal chamber to mix the aqueous buffer and organic layer simultaneously. This paddle floats in the organic layer as the aqueous volume increases and maintains the hydrodynamics in both the aqueous and organic phases. The combination of the biphasic system in the GIS-α and the moving double paddles resulted to increased dissolution profiles of fenofibrate, danazol, and celecoxib while not affecting that of ritonavir. Incorporating these dissolution profiles in a PBPK model using GastroPlus® improved the predictability of bioperformance of those oral medicines. Overall, this methodology considers both dissolution and absorption and proves to be a useful tool in predicting the in vivo performance of low-solubility drugs.

Gastroretentive drug delivery systems: A holy grail in oral delivery

Gastroretentive drug delivery systems (GRDDSs) offer a promising strategy for enhancing oral drug bioavailability by prolonging gastric residence time and enabling site-specific drug release. This review examines the key materials used in GRDDSs, including polymers for controlled drug release, gas-generating agents for buoyancy, and mucoadhesive components for improved retention and stability. Advances in fabrication techniques, such as 3D printing, spray drying, and nanoparticle encapsulation, have enabled precise modulation of drug release kinetics and retention properties. However, challenges such as inter-subject variability, physiological constraints, and manufacturing scalability remain. Future research will focus on smart materials, multi-drug platforms, and expanding applications to biologics and nutraceuticals, paving the way for more effective and patient-compliant oral drug delivery systems.

Correlation Between Dissolution Profiles of Salt-Form Drugs in Biorelevant Bicarbonate Buffer and Oral Drug Absorption: Importance of Dose/ Fluid Volume Ratio

PURPOSE

The purpose of this study was to investigate the correlation between the dissolution profiles of salt-form drugs in biorelevant bicarbonate buffer and oral drug absorption.

METHODS

Ciprofloxacin HCl (CPFX HCl), garenoxacin mesylate (GRNX MS), tosufloxacin tosylate (TFLX TS), levofloxacin free-form (LVFX FF), and sitafloxacin free-form (STFX FF) were employed as model drugs. Bicarbonate buffer fasted state simulated intestinal fluid (BCB-FaSSIF) was used as a biorelevant dissolution medium (pH 6.5, BCB 10 mM (floating lid method), taurocholic acid (3 mM) and lecithin (0.75 mM)). The fraction of a dose absorbed in humans (Fa) was predicted by a simple theoretical framework for oral drug absorption using equilibrium solubility at pH 6.5 (Seq,pH6.5) or average dissolved drug concentration in the dissolution tests (Cdissolv,AV).

RESULTS

Fa was adequately predicted using Seq,pH6.5 for LVFX FF and STFX FF, however, underpredicted for CPFX HCl (tenfold), GRNX MS (twofold), and TFLX TS (sevenfold). When compendial Dose/FV was used for the dissolution test of CPFX HCl, bulk pH (pHbulk) remained unchanged and Cdissolv,AV ≈ Seq,pH6.5, resulting in a tenfold underprediction of Fa. Using clinical Dose/FV, pHbulk was decreased, Cdissolv,AV was increased, resulting in adequate Fa prediction. Similarly, for GRNX MS and TFLX TS, Fa predictability was improved using Cdissolv,AV at clinical Dose/FV. In these conditions, Cdissolv,AV > Seq,pH6.5 due to decreased pHbulk below the first pKa of the drugs.

CONCLUSION

The use of clinical Dose/FV was important for improving the correlation between the biorelevant dissolution profiles and Fa for salt-form drugs.

Development of a novel polyelectrolyte complex nanocomposite of modified chitosan and karaya gum for co-delivery of 5-fluorouracil and curcumin for cancer therapy

Combination chemotherapy is a relatively recent and preferred method for cancer treatment. Sustained delivery of dual drugs can be achieved with a suitable matrix. In the present work, a pH-responsive polyelectrolyte complex (PEC) of trimethylchitosan and carboxymethylkaraya gum containing silver nanoparticles (SNps) has been developed as a matrix material for co-delivery of the drugs, 5-fluorouracil (5-Fu) and curcumin (Cur). The experimental conditions have been optimized for high yield and high swelling of the PEC nanocomposite. 1H-NMR, FT-IR, FE-SEM, P-XRD, HR-TEM, EDS, TGA techniques and zeta potential measurements have been employed in the physico-chemical characterization of the nanocomposite material. The presence of SNps with an average diameter of 16.57 ± 1.25 nm influenced the surface structure and hydrophilicity of the PEC. The swelling study indicated higher swelling at pH 7.4 than at pH 1.2. The two drugs, 5-Fu and Cur, were successfully entrapped and released from the nanocomposite in a sustained manner. Cytotoxicity studies performed with the MCF-10A cell line confirmed the biocompatibility of the nanocomposite and those with the MCF-7 cell line indicated the synergistic effect of the dual drugs in controlling cancer cell growth. The overall study indicates the usefulness of the PEC nanocomposite made from modified polysaccharides, chitosan and karaya gum as a promising material for the development of a dual drug delivery system for cancer treatment.

Effect of pH and Buffer Capacity of Physiological Bicarbonate Buffer on Precipitation of Drugs

The purpose of this study was to investigate the effect of the pH and buffer capacity (β) of physiological bicarbonate buffer solutions (BCB) on drug precipitation. The precipitation profiles of poorly soluble drugs in BCB were evaluated by using a pH-shift precipitation test. Phosphate buffer solutions (PPB) were used for comparison. Two weakly acidic drugs (pKa: 4.9 and 7.0) and two weakly basic drugs (pKa: 6.1 and 8.3) were used as model drugs. The bulk phase pH value (pHbulk) and β values were set to cover the physiological range in the small intestines (pH: 5.5 to 7.5, β: 2.2 to 17.6 mM/ΔpH). A floating lid was used to maintain the pHbulk of BCB to avoid CO2 loss. It was also applied to PPB to align the experimental conditions. Each drug was completely dissolved in HCl (pH 3.0, for weakly basic drugs) or NaOH (pH 11.0, for weakly acidic drugs) solutions (450 mL, 50 rpm, 37 °C). The pHbulk value was then shifted to the neutral pH region by adding a 10-fold concentrated buffer solution (50 mL, final volume of 500 mL). The initial total drug concentration (neutral + ionized species) was set so that the concentration and supersaturation ratio of the neutral species were the same under all pHbulk conditions. The solid forms of the precipitates were determined by powder X-ray diffraction and differential scanning calorimetry. In BCB, as pHbulk was increased above (for weakly acidic drugs) or decreased below (for weakly basic drugs) the drug pKa value, the precipitation of the free form solid became slower. As β was increased, drug precipitation in BCB became faster. Drug precipitation in PPB was faster than that in BCB and less affected by pHbulk and β. In BCB, at pHbulk at which a drug is ionizable, the surface pH of the precipitating particles can differ from pHbulk because of the slow hydration process of CO2. In conclusion, pHbulk and β affected the precipitation of weakly acidic and basic drugs in BCB. As BCB is a physiological buffer in the small intestine, it should be used for precipitation studies of weakly acidic and basic drugs.

Current Developments in the Delivery of Gastro-Retentive Drugs

The pharmaceutical industry has expressed a lot of interest in site specific drug delivery & oral controlled release to increase treatment efficiency. The idea of a unique drug delivery system was developed to address several concerns with the physicochemical characteristics of drug molecules and the associated formulations. The use of gastro retentive systems for drug delivery, which focus on site-specific drug release for either systemic or local effects in the stomach, is one of these cutting-edge strategies for lengthening gastric residency time. This approach is especially useful for drugs that have a small window of upper gastro intestinal tract absorption. This review has discussed various gastro-retentive techniques, including floating & non-floating systems. With a focus on the numerous gastro retentive approaches that have lately emerged as the most efficient methods for site specific oral controlled release drug administration, the aim of this study on gastro retentive drug delivery systems was to synthesise the most current findings. We have highlighted the major reasons affecting gastric retention so that you may comprehend the many physiological challenges involved. Next, we discussed the different gastro retentive strategies that have been developed and improved to date, including floating, high density, mucoadhesive, unfoldable, expandable, super porous hydrogel, & magnetic systems. The benefits of gastro retentive medication administration techniques were then thoroughly discussed.

How the Magenstrasse is formed after meals: Protein aggregation hypothesis

Magenstrasse (stomach road) is reported to potentially influence the absorption of orally administered drugs by facilitating a gastric emptying of ingested water under postprandial condition. We hypothesized the Magenstrasse is a consequence of the formation of protein aggregates due to the decrease in gastric pH associated with stimulated gastric acid secretion. The formation mechanism of the Magenstrasse was examined in vitro using a gastric chamber system which reproduces postprandial conditions in the stomach. Oral liquid meals containing different amounts of proteins were mixed with simulated gastric fluid containing pepsin in the gastric chamber. When a high-protein liquid meal was used, infusion of gastric acid caused protein denaturation, generating semisolid aggregates. Then, to evaluate the impact of the aggregates, fluorescein isothiocyanate-dextran 4000 (FD-4) solution was added. The presence of protein aggregates facilitated the elution of FD-4 from the gastric chamber, indicating that the semisolid aggregates suppressed mixing of FD-4 solution with meals. In addition, formation of the same type of protein aggregates was observed in vivo in rat stomach after ingesting a high-protein liquid meal. These in vitro and in vivo results support the idea that protein aggregation of liquid meals in the stomach contributes the formation of the Magenstrasse.

Acid-Neutralizing Omeprazole Formulation for Rapid Release and Absorption

Background/Objectives: Omeprazole undergoes degradation in acidic conditions, which makes it unstable in low pHs found in the gastric environment. The vast majority of already marketed omeprazole formulations use enteric polymer coatings to protect the drug from exposure to acidic pH in the stomach, allowing for drug release in the small intestine where the pH is higher. This study aimed to explore the technical aspects of using stomach acid neutralizers as an alternative to polymeric coatings for omeprazole. Methods: After evaluating various neutralizers, magnesium oxide and sodium bicarbonate were chosen to be incorporated into capsules containing omeprazole, which then underwent in vitro dissolution testing to assess their ability to maintain optimal pH levels and ensure appropriate dissolution kinetics. Hygroscopicity and chemical stability of the selected formulation were tested to prove pharmaceutical quality of the product. An in vivo pharmacokinetic study was conducted to demonstrate the efficacy of the omeprazole-sodium bicarbonate formulation in providing faster absorption in humans. Results: Sodium bicarbonate was selected as the most suitable antacid for ensuring omeprazole stabilization. Its quantity was optimized to effectively neutralize stomach acid, facilitating the rapid release and absorption of omeprazole. In vitro studies demonstrated the ability of the formulation to neutralize gastric acid within five minutes. In vivo studies indicated that maximum concentrations of omeprazole were achieved within half an hour. The product met the requirements of pharmaceutical quality. Conclusions: An easily manufacturable, fast-absorbing oral formulation was developed as an alternative to enteric-coated omeprazole.

Controlling Oral Polymicrobial Biofilm Using Usnic Acid on the Surface of Titanium in the Artificial Saliva Media

Background/Objectives: Titanium dental implants, while highly successful, face challenges due to polymicrobial infections leading to peri-implantitis and implant failure. Biofilm formation on implant surfaces is the primary cause of these infections, with factors such as matrix production and cross-kingdom interactions contributing to the microbial accumulation of bacterial and fungal pathogens species. To combat this issue, naturally derived molecules have been reported to overcome the hurdle of antimicrobial resistance against the application of conventional antibiotics and antifungals. Methods: The present study aimed to employ the lichen-derived molecules, usnic acid (UA), to retard the development of biofilms of bacterial and fungal pathogens on the surface of titanium kept in the human artificial saliva (HAS) working as a growth-supporting, host-mimicking media. Results: The minimum inhibitory concentration of UA in HAS towards Candida albicans was >512 µg/mL, whereas against Staphylococcus aureus and Streptococcus mutans, it was determined to be 512 µg/mL. Whereas, in the standard growth media, the MIC value of UA towards S. mutans and S. aureus were 8 and 16 µg/mL; however, against C. albicans, it was 512 µg/mL. UA synergistically enhanced the efficacy of the antibiotics toward bacterial pathogens and the efficacy of antifungals against C. albicans. The antibiofilm results depict the fact that in the HAS, UA significantly reduced both mono-species of S. mutans, S. aureus, and C. albicans and mixed-species biofilm of C. albicans with S. mutans and S. aureus on the surface of the titanium. Conclusions: The present study showed that UA is a promising natural drug that can control oral polymicrobial disease as a result of the application of dental implants.

Bioavailability Enhancement and Formulation Technologies of Oral Mucosal Dosage Forms: A Review

The oral mucosa is a versatile surface for drug administration, supporting both local and systemic therapies. Many active substances are effectively absorbed in the oral cavity, offering an alternative to enteral administration by bypassing the harsh gastrointestinal environment and hepatic first-pass metabolism. This has made oral mucosal drug delivery a growing area of research. Enhancing the bioavailability of active ingredients is a key focus in pharmaceutical technology, especially given the challenges of developing new drugs. Numerous strategies to improve bioavailability are compatible with oral mucosal delivery, with the unique anatomy of the oral cavity enabling specialized applications. A variety of dosage forms tailored for oral mucosal delivery meet therapeutic needs while addressing biopharmaceutical and patient compliance challenges. Proper formulation can achieve controlled release, improved bioavailability, and patient convenience. This review highlights the potential of oral mucosal drug delivery, focusing on bioavailability enhancement methods and the types and production technologies of dosage forms optimized for use in the oral cavity.

Effect of bicarbonate buffer on artificial membrane permeation of drugs

Background and purpose

The pH value of the small intestine is physiologically maintained by bicarbonate buffer (BCB). However, the effect of BCB on the membrane permeation of drugs has not been investigated. The purpose of this study was to investigate the effect of BCB on the passive membrane permeation of drugs.

Experimental approach

The μFlux apparatus (pION Inc.) was used for permeability measurements. To avoid a pH change of BCB, a floating lid was newly developed for μFlux. The membrane filter was coated with a 10 % soybean lecithin-decane solution. The flux measurement was performed in an iso-pH condition (pH 6.5, BCB = 10 mM, buffer capacity (β)= 4.4 mM pH-1). Phosphate buffer (PPB) with the same pH and β was used for comparison (PPB = 8 mM).

Key results

The floating lid suppressed the pH increase to less than 0.1 for 120 min. The effective permeability (P e) values of lipophilic weakly acidic and basic drugs were lower in BCB than in PPB (ketoprofen, naproxen, and propranolol). On the other hand, the P e values in BCB and PPB were similar for unionizable drugs (caffeine and antipyrine) and hydrophilic weakly basic drugs (metoprolol and procainamide).

Conclusion

Passive membrane permeation of lipophilic weakly acidic and basic drugs was slower in BCB than in PPB. This was suggested to be attributed to the slow neutralization rate of BCB, which affects the pH value adjacent to the membrane surface.

Nanoencapsulation of vitamin B2 using chitosan-modified poly(lactic-co-glycolic acid) nanoparticles: Synthesis, characterization, and in vitro studies on simulated gastrointestinal stability and delivery

Vitamin B2, or riboflavin, is essential for maintaining healthy cellular metabolism and function. However, its light sensitivity, poor water solubility, and gastrointestinal barriers limit its storage, delivery, and absorption. Selecting suitable nanomaterials for encapsulating vitamin B2 is crucial to overcoming these challenges. This study employed chitosan-coated poly(lactic-co-glycolic acid) nanoparticles (CS-PLGA NPs) as a novel delivery system to enhance the bioavailability of vitamin B2 for food fortification and nutraceutical applications. The nanoparticles, with sizes below 200 nm, exhibited greater stability than PLGA NPs after freeze-drying and in simulated body fluids. Encapsulation improved the photostability of vitamin B2 under ultraviolet light and prolonged its release in simulated body fluids compared to non-encapsulated vitamin B2. Furthermore, CS-PLGA NPs demonstrated higher uptake in intestinal epithelial cells (Caco-2), indicating enhanced transport and potential for use in fortified food systems. These findings underscore the promise of CS-PLGA NPs for delivering vitamin B2 in food, nutraceutical, and pharmaceutical applications. PRACTICAL APPLICATION: The use of chitosan-coated PLGA NPs for encapsulating vitamin B2 offers a promising solution to enhance its bioavailability, especially for individuals with gastrointestinal absorption issues. This formulation improves stability, controlled release, and cellular uptake, which can lead to more effective supplementation strategies in nutraceutical and pharmaceutical applications. It could benefit patients with vitamin B2 deficiencies, such as those with malabsorption disorders, by ensuring efficient delivery through the gastrointestinal tract. Additionally, this approach can be applied to other water-soluble vitamins or bioactive compounds, offering a versatile platform for improving the efficacy of oral supplements.

A quantification of gastric and duodenal fluid volumes in older adults using MRI

Older adults are an inherently heterogeneous population with various underlying pathologies, medication use, and habits. In this study, the variability of this population was studied for the gastric and duodenal fluid volumes, as the amount of gastrointestinal volumes could play an essential role in the dissolution of drugs. The fluid volumes were retrospectively quantified by using magnetic resonance imaging (MRI). In 265 included fasted older individuals, the gastric fluid volume was 28.9 ± 21.1 mL (arithmetic mean ± standard deviation). No significant covariate-effect on stomach fluid volume was observed for various medication use, pathologies, and habits (e.g. hypertension, smoking, proton-pump inhibitors (PPIs), and aspirin). The gastric fluid volume remained constant with increasing age and had a high variability. The volumes and the variability were, however, not higher than the gastric values reported in healthy younger adults. The duodenal fluid volume was 16.6 ± 10.0 mL and a slight but statistically significant decrease with age was seen. In addition, cystic pancreas, obesity, diuretics, and PPI use demonstrated a moderate but significant correlation with the duodenal fluid volume. The findings of this study could be considered when developing and testing new drug candidates for the older adult population. For example, the volumes including their variability could be used as an input in physiologically based pharmacokinetic (PBPK) modelling approaches to predict drug exposure in this population.

Characterization of oral drug absorption from jelly formulations: Effects of membrane permeability and intestinal fluid volume

This study aims to clarify the process of oral drug absorption from jelly formulations. Agar and pectin-based jellies containing drugs with different membrane permeability (high: antipyrine [ANT], medium: metoprolol [MET], low: atenolol [ATE]) were prepared and tested for in vitro drug release and in vivo drug absorption in rats. All drugs showed similar release profiles in vitro from both jelly formulations, except for the faster release from pectin jelly at neutral pH. In contrast, in vivo absorption of ATE but not of ANT from jelly formulations was significantly lower than from solution. Absorption of ATE and MET was low from agar jelly after oral administration, whereas additional water intake significantly increased the absorption. The process of drug absorption was described by the compartmental model consisting of jelly, intestinal fluid, and blood compartments. Drugs in the jelly diffuse into the intestinal fluid and then permeate the intestinal membrane. By considering the rate-limiting process, membrane permeability-dependent drug absorption from agar jelly and the effects of water intake were identified. In conclusion, jelly formulations may potentially decrease and delay drug oral absorption, especially of poorly permeable drugs. Intestinal fluid volume is one of the important factors to control the drug absorption.

Self-microemulsifying drug delivery system-based gastroretentive in situ raft of pazopanib with enhanced solubility and bioavailability

Pazopanib hydrochloride (PZH) is a Biopharmaceutics Classification System class II drug that faces challenges at the formulation forefront including low aqueous solubility (0.043 mg/mL) and poor oral bioavailability (14-39%). The present investigation aimed to develop a self-microemulsifying drug delivery system (SMEDDS) of PZH using a blend of Capryol® 90, Labrasol®, and propylene glycol to improve its solubility. Furthermore, a sustained-release SMEDDS-based gastroretentive floating system was developed and optimized using the Central Composite Design approach of DoE. The optimized SMEDDS-based in situ gelling raft, R-SM-PZH, exhibited minimal floating lag time (3.09 ± 0.8 s), optimal viscosity (1229.4 ± 20.9 cP) and density (0.327 ± 0.15 g/mL) as compared to other formulations under study. Additionally, R-SM-PZH was evaluated for its in vitro dissolution in FaSSGF and FeSSGF, pharmacokinetic profile, and MTT assay (against NCI-H460 lung cancer cells) compared to pure PZH. A 12 h sustained release, three-fold augmentation in dissolution rate and bioavailability, and 15-fold enhancement in cytotoxicity were observed in comparison to pure PZH. Thus, the SMEDDS-based in situ gelling raft presents a promising approach to advancing the developability potential of PZH.

Impact of advanced age on the gastric emptying of water under fasted and fed state conditions

Although older people are the main users of oral medications, few studies are reported on the influence of advanced age on gastric emptying rate of non-caloric liquids. This study aimed at evaluating the gastric emptying of 240 ml water in healthy older and young adults in fasted and fed state conditions using the established method of salivary caffeine kinetics. The gastric emptying of water was evaluated in 12 healthy older volunteers (mean age: 73 ± 6 years) and 12 healthy younger volunteers (mean age: 25 ± 2 years) with the ingestion of a rapid disintegrating tablet containing 20 mg of 13C3-caffeine. The gastric emptying of water was assessed indirectly by calculating the AUC ratios of salivary caffeine concentrations in specific time segments. Comparison of the AUC ratios showed no statistically significant difference between young and older volunteers in both fasted and fed state conditions (p > 0.05). Advanced age itself seems to have no relevant effect on gastric emptying of water in either fasted or fed state conditions and the phenomenon of Magenstrasse appears to follow a similar pattern in healthy older adults as in healthy younger adults.

Radioactive ADME Demonstrates ARV-110's High Druggability Despite Low Oral Bioavailability

Proteolysis-targeting chimeras (PROTACs) have emerged as potentially effective therapeutic medicines, but their high molecular weight and poor solubility directly impact their oral bioavailability. This work synthesized 14C-labeled bavdegalutamide (ARV-110) as a model compound of PROTACs to evaluate its ADME features. Compared with targeted antitumor drugs, the use of food increased oral bioavailability of ARV-110 in rats from 10.75% to 20.97%, which is still undesirable. However, the therapeutic effect of ARV-110 at a low dose was much better than that of enzalutamide, demonstrating the specific catalytic medicinal properties of PROTACs. Moreover, the specific distribution of ARV-110 in subcutaneous prostate tumors was determined by quantitative whole-body autoradiography (QWBA). Notably, the specificity and activity of PROTACs take precedence over their oral absorption, and high oral bioavailability is not necessary to produce excellent therapeutic effects. This work presents a roadmap for developing future PROTAC medications from a radioactive drug metabolism and pharmacokinetics (DMPK) perspective.

Poly(2-Deoxy-2-Methacrylamido-D-Glucose)-Based Complex Conjugates of Colistin, Deferoxamine and Vitamin B12: Synthesis and Biological Evaluation

Growing resistance to traditional antibiotics poses a global threat to public health. In this regard, modification of known antibiotics, but with limited applications due to side effects, is one of the extremely promising approaches at present. In this study, we proposed the synthesis of novel complex polymeric conjugates of the peptide antibiotic colistin (CT). A biocompatible and water-soluble synthetic glycopolymer, namely, poly(2-deoxy-2-methacrylamido-D-glucose) (PMAG), was used as a polymer carrier. In addition to monoconjugates containing CT linked to PMAG by hydrolyzable and stable bonds, a set of complex conjugates also containing the siderophore deferoxamine (DFOA) and vitamin B12 was developed. The structures of the conjugates were confirmed by 1H NMR and FTIR-spectroscopy, while the compositions of conjugates were determined by UV-Vis spectrophotometry and HPLC analysis. The buffer media with pH 7.4, corresponding to blood or ileum pH, and 5.2, corresponding to the intestinal pH after ingestion or pH in the focus of inflammation, were used to study the release of CT. The resulting conjugates were examined for cytotoxicity and antimicrobial activity. All conjugates showed less cytotoxicity than free colistin. A Caco-2 cell permeability assay was carried out for complex conjugates to simulate the drug absorption in the intestine. In contrast to free CT, which showed very low permeability through the Caco-2 monolayer, the complex polymeric conjugates of vitamin B12 and CT provided significant transport. The antimicrobial activity of the conjugates depended on the conjugate composition. It was found that conjugates containing CT linked to the polymer by a hydrolyzable bond were found to be more active than conjugates with a non-hydrolyzable bond between CT and PMAG. Conjugates containing DFOA complexed with Fe3+ were characterized by enhanced antimicrobial activity against Pseudomonas aeruginosa compared to other conjugates.

Mechanisms of intestinal pharmacokinetic natural product-drug interactions

The growing co-consumption of botanical natural products with conventional medications has intensified the need to understand potential effects on drug safety and efficacy. This review delves into the intricacies of intestinal pharmacokinetic interactions between botanical natural products and drugs, such as alterations in drug solubility, permeability, transporter activity, and enzyme-mediated metabolism. It emphasizes the importance of understanding how drug solubility, dissolution, and osmolality interplay with botanical constituents in the gastrointestinal tract, potentially altering drug absorption and systemic exposure. Unlike reviews that focus primarily on enzyme and transporter mechanisms, this article highlights the lesser known but equally important mechanisms of interaction. Applying the Biopharmaceutics Drug Disposition Classification System (BDDCS) can serve as a framework for predicting and understanding these interactions. Through a comprehensive examination of specific botanical natural products such as byakkokaninjinto, green tea catechins, goldenseal, spinach extract, and quercetin, we illustrate the diversity of these interactions and their dependence on the physicochemical properties of the drug and the botanical constituents involved. This understanding is vital for healthcare professionals to effectively anticipate and manage potential natural product-drug interactions, ensuring optimal patient therapeutic outcomes. By exploring these emerging mechanisms, we aim to broaden the scope of natural product-drug interaction research and encourage comprehensive studies to better elucidate complex mechanisms.

Discovery and in vitro Evaluation of Novel Serotonin 5-HT2A Receptor Ligands Identified Through Virtual Screening

The 5-HT2A receptor is a molecular target of high pharmacological importance. Ligands of this protein, particularly atypical antipsychotics, are useful in the treatment of numerous mental disorders, including schizophrenia and major depressive disorder. Structure-based virtual screening using a 5-HT2A receptor complex was performed to identify novel ligands for the 5-HT2A receptor, serving as potential antidepressants. From the Enamine screening library, containing over 4 million compounds, 48 molecules were selected for subsequent experimental validation. These compounds were tested against the 5-HT2A receptor in radioligand binding assays. From the tested batch, six molecules were identified as ligands of the main molecular target and were forwarded to a more detailed in vitro profiling. This included radioligand binding assays at 5-HT1A, 5-HT7, and D2 receptors and functional studies at 5-HT2A receptors. These compounds were confirmed to show a binding affinity for at least one of the targets tested in vitro. The success rate for the inactive template-based screening reached 17 %, while it was 9 % for the active template-based screening. Similarity and fragment analysis indicated the structural novelty of the identified compounds. Pharmacokinetics for these molecules was determined using in silico approaches.

Drug Crystal Precipitation in Biorelevant Bicarbonate Buffer: A Well-Controlled Comparative Study with Phosphate Buffer

The purpose of the present study was to clarify whether the precipitation profile of a drug in bicarbonate buffer (BCB) may differ from that in phosphate buffer (PPB) by a well-controlled comparative study. The precipitation profiles of structurally diverse poorly soluble drugs in BCB and PPB were evaluated by a pH-shift precipitation test or a solvent-shift precipitation test (seven weak acid drugs (pKa: 4.2 to 7.5), six weak base drugs (pKa: 4.8 to 8.4), one unionizable drug, and one zwitterionic drug). To focus on crystal precipitation processes, each ionizable drug was first completely dissolved in an HCl (pH 3.0) or NaOH (pH 11.0) aqueous solution (450 mL, 50 rpm, 37 °C). A 10-fold concentrated buffer solution (50 mL) was then added to shift the pH value to 6.5 to initiate precipitation (final volume: 500 mL, buffer capacity (β): 4.4 mM/ΔpH (BCB: 10 mM or PPB: 8 mM), ionic strength (I): 0.14 M (adjusted by NaCl)). The pH, β, and I values were set to be relevant to the physiology of the small intestine. For an unionizable drug, a solvent-shift method was used (1/100 dilution). To maintain the pH value of BCB, a floating lid was used to avoid the loss of CO2. The floating lid was applied also to PPB to precisely align the experimental conditions between BCB and PPB. The solid form of the precipitants was identified by powder X-ray diffraction and differential scanning microscopy. The precipitation of weak acids (pKa ≤ 5.1) and weak bases (pKa ≥ 7.3) was found to be slower in BCB than in PPB. In contrast, the precipitation profiles in BCB and PPB were similar for less ionizable or nonionizable drugs at pH 6.5. The final pH values of the bulk phase were pH 6.5 ± 0.1 after the precipitation tests in all cases. All precipitates were in their respective free forms. The precipitation of ionizable weak acids and bases was slower in BCB than in PPB. The surface pH of precipitating particles may have differed between BCB and PPB due to the slow hydration process of CO2 specific to BCB. Since BCB is a physiological buffer in the small intestine, it should be considered as an option for precipitation studies of ionizable weak acids and bases.

Forecasting the effect of water gastric emptying patterns on model drug release in an in vitro glass-bead flow-through system

Oral solid dosage forms are most frequently administered with a glass of water which empties from the stomach relatively fast, but with a certain variability in its emptying kinetics. The purpose of this study was thus to simulate different individual water gastric emptying (GE) patterns in an in vitro glass-bead flow-through dissolution system. Further, the effect of GE on the dissolution of model drugs from immediate-release tablets was assessed by determining the amount of dissolved drug in the samples pumped out of the stomach compartment. Additionally, different HCl solutions were used as dissolution media to assess the effect of the variability of pH of the gastric fluid on the dissolution of three model drugs: paracetamol, diclofenac sodium, and dipyridamole. The difference in fast and slow GE kinetics resulted in different dissolution profiles of paracetamol in all studied media. For diclofenac sodium and dipyridamole tablets, the effect of GE kinetics was well observed only in media, where the solubility was not a limiting factor. Therefore, GE kinetics of co-ingested water influences the drug release from immediate-release tablets, however, in certain cases, other parameters influencing drug dissolution can partly or fully hinder the expression of this effect.

Evaluation of the Effects of Meal Type and Acid-Reducing Agents on the Pharmacokinetics of Cilofexor, a Selective Nonsteroidal Farnesoid X Receptor Agonist

Cilofexor is a nonsteroidal farnesoid X receptor agonist being developed in combination with firsocostat/semaglutide for the treatment of nonalcoholic steatohepatitis. This phase 1 study evaluated the effects of food and acid-reducing agents (ARAs) on the pharmacokinetics of cilofexor (100- or 30-mg fixed-dose combination with firsocostat) in healthy participants. Cohorts 1 (n = 20, 100 mg) and 2 (n = 30, 30 mg) followed a 3-period, 2-sequence crossover design and evaluated effects of light-fat and high-fat meals. Cohort 3 (n = 30, 100 mg fasting) followed a 2-period, 2-sequence crossover design and evaluated the effects of a 40-mg single dose of famotidine. Cohort 4 (n = 18, 100 mg) followed a 3-period, 2-sequence crossover design and evaluated the effects of a 40-mg once-daily regimen of omeprazole administered under fasting conditions or following a light-fat meal. Administration with light-fat or high-fat meals resulted in no change and an ∼35% reduction in cilofexor AUC, respectively, relative to the fasting conditions. Under fasting conditions, famotidine increased cilofexor AUC by 3.2-fold and Cmax by 6.1-fold, while omeprazole increased cilofexor AUC by 3.1-fold and Cmax by 4.8-fold. With a low-fat meal, omeprazole increased cilofexor exposure to a lesser extent (Cmax 2.5-fold, AUC 2.1-fold) than fasting conditions. This study suggests that caution should be exercised when cilofexor is administered with ARAs under fed conditions; coadministration of cilofexor (100 or 30 mg) with ARAs under fasting conditions is not recommended with the current clinical trial formulations.

Therapeutic coordination polymers: tailoring drug release through metal-ligand interactions

Developing tunable materials which exhibit sustained drug release is a considerable challenge. Herein, we report the concept of Therapeutic Coordination Polymers (TCPs); non-porous coordination polymers constructed from biocompatible components which demonstrate tunable zero-order drug release kinetics upon degradation of metal-ligand bonds. TCPs were constructed from three principal components: (i) a cationic metal center (M = Mg2+, Mn2+, Zn2+, or Cu2+); (ii) an anionic drug (Diclofenac); and (iii) an alkyl bis-imidazole organic ligand which behaves as a "linker" between metal centers. Most drug-release materials, such as amorphous polymer dispersions, or metal-organic frameworks rely on a diffusion-based mechanism for drug release, but the degradation-controlled release of drugs from non-porous one-periodic coordination polymers has been largely unexplored. TCPs described herein exhibit a high wt% of pharmaceutical (>62%), tailorable zero-order drug release rate kinetics which span over three orders of magnitude, and stimuli-responsive drug release behavior making them well suited for extended drug-release applications.

Supramolecular Peptide Self-Assemblies Facilitate Oral Immunization

Oral immunization is a promising strategy for preventing and treating gastrointestinal (GI) infections and diseases, as it allows for direct access to the disease site. To elicit immune responses within the GI tract, however, there are many obstacles that oral vaccines must surmount, including proteolytic degradation and thick mucus barriers. Here, we employed a modular self-assembling peptide nanofiber platform to facilitate oral immunization against both peptide and small molecule epitopes. Synthesizing nanofibers with d-amino acids rendered them resistant to proteases in vitro, whereas l-amino acid nanofibers were rapidly degraded. Additionally, the inclusion of peptide sequences rich in proline, alanine, and serine (PAS), increased nanofiber muco-penetration, and accelerated nanofiber transport through the GI tract. Oral immunization with PASylated nanofibers and mucosal adjuvant generated local and systemic immune responses to a peptide epitope but only for l-amino acid nanofibers. Further, we were able to apply this design to also enable oral immunization against a small molecule epitope and illustrated the therapeutic and prophylactic effectiveness of these immunizations in mouse models of colitis. These findings demonstrate that supramolecular peptide self-assemblies have promise as oral vaccines and immunotherapies.

Solubility vs Dissolution in Physiological Bicarbonate Buffer

BACKGROUND

Phosphate buffer is often used as a replacement for the physiological bicarbonate buffer in pharmaceutical dissolution testing, although there are some discrepancies in their properties making it complicated to extrapolate dissolution results in phosphate to the in vivo situation. This study aims to characterize these discrepancies regarding solubility and dissolution behavior of ionizable compounds.

METHODS

The dissolution of an ibuprofen powder with a known particle size distribution was simulated in silico and verified experimentally in vitro at two different doses and in two different buffers (5 mM pH 6.8 bicarbonate and phosphate).

RESULTS

The results showed that there is a solubility vs. dissolution mismatch in the two buffers. This was accurately predicted by the in-house simulations based on the reversible non-equilibrium (RNE) and the Mooney models.

CONCLUSIONS

The results can be explained by the existence of a relatively large gap between the initial surface pH of the drug and the bulk pH at saturation in bicarbonate but not in phosphate, which is caused by not all the interfacial reactions reaching equilibrium in bicarbonate prior to bulk saturation. This means that slurry pH measurements, while providing surface pH estimates for buffers like phosphate, are poor indicators of surface pH in the intestinal bicarbonate buffer. In addition, it showcases the importance of accounting for the H2CO3-CO2 interconversion kinetics to achieve good predictions of intestinal drug dissolution.

Dissolution Profiles of Immediate Release Products of Various Drugs in Biorelevant Bicarbonate Buffer: Comparison with Compendial Phosphate Buffer

PURPOSE

The purpose of this study was to clarify the extent to which the dissolution profiles of immediate release (IR) products of various drugs differ between biorelevant bicarbonate buffer (BCB) and compendial phosphate buffer (PPB).

METHODS

The dissolution profiles of the IR products of fifteen poorly soluble ionizable drugs were measured in BCB and PPB. BCB was set to be relevant to the small intestine (pH 6.8, 10 mM). The pH was maintained using the floating lid method. The Japanese pharmacopeia second fluid (JP2, 25 mM phosphate buffer, nominal pH 6.8) was used as compendial PPB. The compendial paddle apparatus was used for the dissolution tests (500 mL, 50 rpm, 37°C).

RESULTS

In 11/15 cases, a difference in dissolved% (< 0.8 or > 1.25-fold) was observed at a time point. In 4/15 cases, the ratio of the area under the dissolution curve was not equivalent (< 0.8 or > 1.25-fold). In the cases of free-form drugs, the dissolution rate tended to be slower in BCB than in JP2. In the case of salt-form drugs, a marked difference was observed for the cases that showed supersaturation. However, no trend was observed in the differences.

CONCLUSIONS

Many IR products showed differences in the dissolution profiles between biorelevant BCB and compendial PPB. With the floating lid method, BCB is as simple and easy to use as PPB. Biorelevant BCB is recommended for dissolution testing.

Physicochemical Characterization and In Vitro Activity of Poly(ε-Caprolactone)/Mycophenolic Acid Amorphous Solid Dispersions

The obtention of amorphous solid dispersions (ASDs) of mycophenolic acid (MPA) in poly(ε-caprolactone) (PCL) is reported in this paper. An improvement in the bioavailability of the drug is possible thanks to the favorable specific interactions occurring in this system. Differential scanning calorimetry (DSC) was used to investigate the miscibility of PCL/MPA blends, measuring glass transition temperature (Tg) and analyzing melting point depression to obtain a negative interaction parameter, which indicates the development of favorable inter-association interactions. Fourier transform infrared spectroscopy (FTIR) was used to analyze the specific interaction occurring in the blends. Drug release measurements showed that at least 70% of the drug was released by the third day in vitro in all compositions. Finally, preliminary in vitro cell culture experiments showed a decreased number of cancerous cells over the scaffolds containing MPA, presumably arising from the anti-cancer activity attributable to MPA.

Anionic liposome formulation for oral delivery of thuricin CD, a potential antimicrobial peptide therapeutic

Thuricin CD is a two-peptide antimicrobial produced by Bacillus thuringiensis. Unlike previous antibiotics, it has shown narrow spectrum activity against Clostridioides difficile, a bacterium capable of causing infectious disease in the colon. However, peptide antibiotics have stability, solubility, and permeability problems that can affect their performance in vivo. This work focuses on the bioactivity and bioavailability of thuricin CD with a view to developing a formulation for delivery of active thuricin CD peptides through the gastrointestinal tract (GIT) for local delivery in the colon. The results indicate that thuricin CD is active at low concentrations only when both peptides are present. While thuricin CD was degraded by proteases and was unstable and poorly soluble in gastric fluid, it showed increased solubility in intestinal fluid, probably due to micelle encapsulation. Based on this, thuricin CD was encapsulated in anionic liposomes, which showed increased activity compared to the free peptide, maintained activity after exposure to pepsin in gastric fluid and intestinal fluid, was stable in suspension for over 21 days at room temperature and for 60 days at 4 °C, and exhibited no toxicity to epithelial intestinal cells. These findings suggest that an anionic lipid-based nano formulation may be a promising approach for local oral delivery of thuricin CD.

Proof-of-Concept in Developing a 45% Drug Loaded Amorphous Nanoparticle Formulation

Amorphous solid dispersion (ASD) is an enabling approach utilized to deliver poorly soluble compounds. ASDs can spontaneously generate drug-rich amorphous nanoparticles upon dissolution, which can act as a reservoir for maintaining supersaturation during oral absorption. But, conventional ASDs are often limited in drug loadings to < 20 %. For indications where the dose is high, this can translate into a significant pill burden. The aim of this research was to develop a high drug loading (DL) amorphous nanoparticle (ANP) formulation that can release the drug-rich nanoparticles into solution upon contact with aqueous environment. Nanoparticles were directly engineered using solvent/anti-solvent precipitation. The obtained nanoparticle suspension was then concentrated followed by solidification to a re-dispersible amorphous dosage form using spray drying or lyophilization. The impact of process variables was studied using dynamic light scattering (DLS), scanning electron microscopy (SEM), high performance liquid chromatography (HPLC), nuclear magnetic resonance (NMR) and differential scanning calorimetry (DSC). It was observed that spray drying led to a non-re-dispersible formulation. Sucrose and trehalose containing lyocakes resulted in re-dispersible formulations. The trehalose containing lyocakes, in a dog study, gave comparable performance to the reference tablet in the fasted state but lower area under the curve (AUC) in fed state.

Predicting Surface pH in Unbuffered Conditions for Acids, Bases, and Their Salts - A Review of Modeling Approaches and Their Performance

Dissolution of ionizable drugs and their salts is a function of drug surface solubility driven by the surface pH, i.e., the microenvironmental pH at the solid/liquid interface, which will deviate from bulk pH when there is an acid-base reaction occurring at the solid/liquid interface. In this work, we first present a brief overview of the modeling approaches available in the literature, classified according to the rate-determining step assumed in the dissolution process. In the second part, we present and evaluate the prediction performance of two different modeling approaches for surface pH. The first method relies only on thermodynamic equilibria, while the second method accounts for transport phenomena of charged compounds through the diffusional boundary layer using the Nernst - Planck equation. Model outcomes are compared with experimental data taken from the literature and obtained during this work. In terms of surface pH predictions, the models provide identical values for weak acids or weak bases. The models' outcomes for bases are in good agreement with experimental data in acidic conditions (bulk pH 1-4), while overpredictions are observed in the 5-7 bulk pH range in a system-dependent manner. Deviations can be related to the effect of surface dissolution (also referred to as surface reaction), which may become a controlling mechanism and slow the replenishment of the unionized drug at the surface of the crystal. Surface pH predictions for acids are generally in good agreement with experiments, with a slight underestimation for some drug examples, which could be related to errors in intrinsic solubility determination or to the assumption of thermodynamic equilibrium at the surface of the drug. A good agreement is also observed for salts with the thermodynamic model except for mesylate salts, suggesting that other phenomena, not currently included in the thermodynamic equilibrium model, may determine the surface pH.

Bioadhesive behaviors of HPMC E5: comparative analysis of various techniques, histological and human radiological evidence

Enhancing drug residence duration within the stomach offers distinct advantages for both localized and systemic effects. Numerous strategies have been proposed to extend drug residence time, with mucoadhesive polymers being a notable avenue. In this context, hydroxypropyl methylcellulose E5 has been employed as both a binding agent for granulating contrast metal powder and a mucoadhesive polymer, spanning various concentrations. The in vitro bioadhesion strength of the formulated tablets was gauged against the stomach lining of rabbits, for the quantification of bioadhesive forces. The temporal aspect of bioadhesion was evaluated through two approaches: one centered on gastric fluid dynamics and another proffered by the researchers, focusing on gastric wall kinetics. The results divulged a decline in bioadhesion force concomitant with high polymer concentrations. Histological examination of stained stomach sections revealed mucosal perturbations within the rabbit stomach. These disruptions exhibited an escalating trend in conjunction with elevated polymer concentrations, culminating in extensive disturbance at a 7.5% polymer concentration. The outcomes unveiled a direct relationship between polymer concentration increments and extended contact time. Subsequent radiological tracking of contrast metal behavior within a mature human stomach indicated a residence time of 6 h due to the entrapment of displaced components at disparate locations.

Chitosan-based oral hydrogel formulations of β-galactosidase to improve enzyme supplementation therapy for lactose intolerance

β-Galactosidase supplementation plays an important role in the life of people with lactose intolerance. However, these formulations are rendered ineffective by the low pH and pepsin in the stomach and pancreatic proteases in the intestine. Therefore, it is necessary to develop oral transport systems for carrying this enzyme in the active form up to the intestine, where the lactose digestion occurs. In this research, a new hydrogel was developed that could potentially be used for enzyme supplement therapy. In this regard, the chitosan-based β-Gal formulations described in the manuscript are an alternative long-acting preparation to the so far available preparations that allow for enzyme protection and mucosal targeting. These hydrogels were prepared from chitosan and polyethylene glycol and contained a covalently immobilized β-galactosidase from Aspergillus oryzae. The β-galactosidase in the hydrogel was protected from degradation in a gastric medium at a pH of 2.5 and retained 75 % of its original activity under subsequent intestinal conditions. In the case of a simulated gastric fluid with a pH of 1.5, a copolymer containing methacrylic acid functional groups was sufficient to protect the hybrid hydrogel from the extremely acidic pH. In addition, the surface of the hydrogel was chemically modified with thiol and amidine groups, which increased the binding to intestinal mucin by 20 % compared with the unmodified hydrogel. These results represent a promising approach for oral transport as a reservoir for β-galactosidase in the small intestine to reduce the symptoms of hypolactasia.

Exploring β-glucan as a micro-nano system for oral delivery targeted the colon

The critical role of oral colon-specific delivery systems (OCDDS) is important for delivering active agents to the colon and rectum specifically via the oral route. The use of micro/nanostructured OCDDS further improves drug stability, bioavailability, and retention time, leading to enhanced therapeutic effects. However, designing micro/nanoscale OCDDSs is challenging due to pH changes, enzymatic degradation, and systemic absorption and metabolism. Biodegradable natural polysaccharides are a promising solution to these problems, and β-glucan is one of the most promising natural polysaccharides due to its unique structural features, conformational flexibility, and specific processing properties. This review covers the diverse chemical structures of β-glucan, its benefits (biocompatibility, easy modification, and colon-specific degradation), and various β-glucan-based micro/nanosized OCDDSs, as well as their drawbacks. The potential of β-glucan offers exciting new opportunities for colon-specific drug delivery.

Aerogels as Carriers for Oral Administration of Drugs: An Approach towards Colonic Delivery

Polysaccharide aerogels have emerged as a highly promising technology in the field of oral drug delivery. These nanoporous, ultralight materials, derived from natural polysaccharides such as cellulose, starch, or chitin, have significant potential in colonic drug delivery due to their unique properties. The particular degradability of polysaccharide-based materials by the colonic microbiota makes them attractive to produce systems to load, protect, and release drugs in a controlled manner, with the capability to precisely target the colon. This would allow the local treatment of gastrointestinal pathologies such as colon cancer or inflammatory bowel diseases. Despite their great potential, these applications of polysaccharide aerogels have not been widely explored. This review aims to consolidate the available knowledge on the use of polysaccharides for oral drug delivery and their performance, the production methods for polysaccharide-based aerogels, the drug loading possibilities, and the capacity of these nanostructured systems to target colonic regions.

Physiological Dynamics in the Upper Gastrointestinal Tract and the Development of Gastrointestinal Absorption Models for the Immediate-Release Oral Dosage Forms in Healthy Adult Human

This review is a revisit of various oral drug absorption models developed in the past decades, focusing on how to incorporate the physiological dynamics in the upper gastrointestinal (GI) tract. For immediate-release oral drugs, GI absorption is a critical input of drug exposure and subsequent human body response, yet difficult to model largely due to the complex GI environment. One of the biggest hurdles lies at capturing the high within-subject variability (WSV) of bioavailability measures, which can be mechanistically explained by the GI physiological dynamics. A thorough summary of how GI dynamics is handled in the absorption models would promote the development of mechanism-based oral drug absorption models, aid in the design of clinical studies regarding dosing regimens and bioequivalence studies based on WSV, and advance the decision-making on formulation selection.

Safety of surfactant excipients in oral drug formulations

Surfactants are a diverse group of compounds that share the capacity to adsorb at the boundary between distinct phases of matter. They are used as pharmaceutical excipients, food additives, emulsifiers in cosmetics, and as household/industrial detergents. This review outlines the interaction of surfactant-type excipients present in oral pharmaceutical dosage forms with the intestinal epithelium of the gastrointestinal (GI) tract. Many surfactants permitted for human consumption in oral products reduce intestinal epithelial cell viability in vitro and alter barrier integrity in epithelial cell monolayers, isolated GI tissue mucosae, and in animal models. This suggests a degree of mis-match for predicting safety issues in humans from such models. Recent controversial preclinical research also infers that some widely used emulsifiers used in oral products may be linked to ulcerative colitis, some metabolic disorders, and cancers. We review a wide range of surfactant excipients in oral dosage forms regarding their interactions with the GI tract. Safety data is reviewed across in vitro, ex vivo, pre-clinical animal, and human studies. The factors that may mitigate against some of the potentially abrasive effects of surfactants on GI epithelia observed in pre-clinical studies are summarised. We conclude with a perspective on the overall safety of surfactants in oral pharmaceutical dosage forms, which has relevance for delivery system development.

Structural Investigation on How Guest Loading of Poly(2-oxazoline)-Based Micelles Affects the Interaction with Simulated Intestinal Fluids

Drug loading of polymer micelles can have a profound effect on their particle size and morphology as well as their physicochemical properties. In turn, this influences performance in biological environments. For oral delivery of drugs, the intestinal environment is key, and consequently, a thorough structural understanding of what happens at this material-biology interface is required to understand in vivo performance and tailor improved delivery vehicles. In this study, we address this interface in vitro through a detailed structural characterization of the colloidal assemblies of polymeric micelles based on poly(2-oxazolines) with three different guest loadings with the natural product curcumin (17-52 wt %) in fed-state simulated intestinal fluids (FeSSIF). For this, we employ NMR spectroscopy, in particular, 1H NMR, 1H-1H-NOESY, and 1H DOSY experiments complemented by quantum chemical calculations and cryo-TEM measurements. Through this mixture of methods, we identified curcumin-taurocholate interactions as central interaction patterns alongside interactions with the polymer and lipids. Furthermore, curcumin molecules can be exchanged between polymer micelles and bile colloids, an important prerequisite for their uptake. Finally, increased loading of the polymer micelles with curcumin resulted in a larger number of vesicles as taurocholate─through coordination with Cur─is less available to form nanoparticles with the lipids. The loading-dependent behavior found in this study deviates from previous work on a different drug substance highlighting the need for further studies including different drug molecules and polymer types to improve the understanding of events on the molecular level.

Non-Invasive Vaccines: Challenges in Formulation and Vaccine Adjuvants

Given the limitations of conventional invasive vaccines, such as the requirement for a cold chain system and trained personnel, needle-based injuries, and limited immunogenicity, non-invasive vaccines have gained significant attention. Although numerous approaches for formulating and administrating non-invasive vaccines have emerged, each of them faces its own challenges associated with vaccine bioavailability, toxicity, and other issues. To overcome such limitations, researchers have created novel supplementary materials and delivery systems. The goal of this review article is to provide vaccine formulation researchers with the most up-to-date information on vaccine formulation and the immunological mechanisms available, to identify the technical challenges associated with the commercialization of non-invasive vaccines, and to guide future research and development efforts.

Self-emulsifying drug delivery systems: A versatile approach to enhance the oral delivery of BCS class III drug via hydrophobic ion pairing

Biopharmaceutical classification systems (BCS) class III drugs belongs to a group of drugs with high solubility in gastrointestinal (GI) fluids and low membrane permeability result in significantly low bioavailability. Self-emulsifying drug delivery systems (SEDDS) considered a suitable candidate to enhance the bioavailability of poorly soluble drugs by improving their membrane permeability, however, incorporating hydrophilic drugs in to these carriers remained a great challenge. The aim of this study was to develop hydrophobic ion pairs (HIPs) of a model BCS class-III drug tobramycin (TOB) in order to incorporate into SEDDS and improve its bioavailability. HIPs of TOB were formulated using anionic surfactants sodium docusate (DOC) and sodium dodecanoate (DOD). The efficiency of HIPs was estimated by measuring the concentration of formed complexes in water, zeta potential determination and log P value evaluation. Solubility studies of HIPs of TOB with DOC were accomplished to screen the suitable excipients for SEDDS development. Consequently, HIPs of TOB with DOC were loaded into SEDDS and assessed the log DSEDDS/release medium and dissociation of these complexes at different intestinal pH over time. Moreover, cytotoxic potential of HIPs of TOB and HIPs loaded SEDDS formulations was evaluated. HIPs of TOB with DOC exhibited the maximum precipitation efficiency at a stoichiometric ratio of 1:5. Log P of HIPs of TOB improved up to 1500-fold compared to free TOB. Zeta potential of TOB was shifted from positive to negative during hydrophobic ion pairing (HIP). HIPs of TOB with DOC was loaded at a concentration of 1% (w/v) into SEDDS formulations. Log DSEDDS/release medium of loaded complexes in to oily droplets was above 2 and dissociated up to 20% at various pH within 4 h. Finding of this study suggested that improvement of the lipophilic character of BCS class-III drugs followed by incorporation into oily droplets can be deliberated as a promising tool to enhance the permeation across biological membranes.

Prediction of Liquid-Liquid Phase Separation at the Dissolving Drug Salt Particle Surface

During the dissolution of drug salt particles, liquid-liquid phase separation (LLPS) of a free form can occur within the unstirred water layer (UWL) of the particles (UWL-LLPS). Theoretically, UWL-LLPS occurs when the free form concentration at the salt particle surface (C₀) exceeds the intrinsic LLPS concentration (S₀^LLPS) of the free form. In the present study, we attempted to predict UWL-LLPS based on the intrinsic physicochemical properties of drugs. Cyproheptadine hydrochloride (CPH-HCl), diclofenac sodium (DCF-Na), papaverine hydrochloride (PAP-HCl), and propafenone hydrochloride (PRF-HCl) were selected as model drug salts. The pH₀ and C₀ values at pHs 4.0-9.5 (citric acid, phosphoric acid, and boric acid, buffer capacity = ca. 4 mM/ΔpH) were calculated using the pK_a, solubility product (K_sp), and diffusion coefficient (D) of a drug. S₀^LLPS was measured using the pH-shift method. UWL-LLPS was predicted to occur when C₀ ≥ S₀^LLPS. The prediction result was then compared with UWL-LLPS observed at each pH by polarized light microscopy (PLM). The pH-LLPS concentration (S_pH^LLPS) profile of each drug was also measured. UWL-LLPS was approximately correctly predicted for CPH-HCl, DCF-Na, and PRF-HCl. However, UWL-LLPS was not observable when C₀ was close to S₀^LLPS. Furthermore, UWL-LLPS was not accurately predicted in the case of PAP-HCl. The pH-S_pH^LLPS profile of PAP did not follow the Henderson-Hasselbalch equation, probably because of the formation of cationic aggregates. In conclusion, UWL-LLPS was approximately predictable for drug salts using their intrinsic physicochemical properties (K_sp, pK_a, D, and S₀^LLPS), except for PAP-HCl.

In silico and in vitro investigation of bile salts as coformers for edaravone coamorphous dispersion- Part I

In the present study, we aimed to design the spray-dried coamorphous dispersion (COAM) of a neuroprotective agent-edaravone (EDR) with bile salts to improve oral bioavailability. After the initial screening of different bile salts, EDR-sodium taurocholate (NaTC) COAM showed 4-fold solubility than a pure drug in 1-7pH range. In silico studies to select coformer for COAM revealed a narrow energy gap, easy charge transfer and high chemical reactivity between EDR and NaTC. The optimized EDR-NaTC COAM in a 1:1 molar ratio was characterized for solid state characterizations and in vitro release study. Hydrogen bond formation between the pyrazolone ring of EDR and the -OH group of the phenanthrene ring of NaTC was observed in the ATR-FTIR spectra of COAM. The DSC and XRPD data indicated the formation of an amorphous halo, whereas SEM photographs demonstrated porous, spherical particles of COAM. The pH-independent in vitro drug release of COAM was observed in 0.1N HCl, pH 4.5 and 6.8 buffers which was 3-fold higher than EDR. The COAM was stable for 6 months at accelerated condition without showing a change in drug content or devitrification (Initial: 98.002±0.942%; Accelerated condition: 97.016±1.110%). Although coamorphous form and hydrogen bonding between EDR-NaTC dispersion were primarily responsible for improved dissolution, NaTC, an exceptional surfactant, has also contributed to it. Moreover, its exclusive structural characteristics could prevent the recrystallization of the drug in supersaturated conditions of the GIT and also minimize the effect of food on oral absorption of EDR which will be studied in animals in the second part of this work.

Predicting Food Effects on Oral Extended-Release Drug Products: A Retrospective Evaluation

Theoretically, the risk of food effects for extended-release (ER) products compared to IR products may be less because: (1) postprandial physiological changes are usually transient and last for 2-3 h only; and (2) the percentage of drug release from an ER product within the first 2-3 h post dose is usually small under both fasted and fed states. The major postprandial physiological changes that can affect oral absorption of ER drugs are delayed gastric emptying and prolonged intestinal transit. Oral absorption of ER drugs under fasted state mainly occurs in large intestine (colon and rectum) while the absorption of ER drugs under fed state occurs in both small and large intestines. We hypothesized that food effects for ER products are mainly caused by intestinal region-dependent absorption and food intake is more likely to increase rather than decrease the exposure of ER products due to a longer transit time and improved absorption in small intestine. For drugs with good absorption from large intestine, food effects on the area under the curve (AUC) of ER products are usually not expected. Our survey of oral drugs approved by the US FDA between 1998-2021 identified 136 oral ER drug products. Among the 136 ER drug products, 31, 6 and 99 products exhibited increased, decreased, and unchanged AUC under fed conditions, respectively. In general, when an ER product exhibits a fasted bioavailability (BA) relative to its corresponding immediate-release (IR) product between 80-125%, regardless the solubility or permeability of drug substances, substantial food effects on the AUC of ER product are generally not expected. If the fasted relative BA data are not available, a high in vitro permeability (i.e., Caco-2 or MDCK cell permeability comparable or higher than that of metoprolol) may inform no food effect on the AUC of an ER product of high-solubility (BCS class I and III) drug.

The Influence of Alcohol Consumption on Intestinal Nutrient Absorption: A Comprehensive Review

Chronic alcohol use has been attributed to the development of malnutrition. This is in part due to the inhibitory effect of ethanol on the absorption of vital nutrients, including glucose, amino acids, lipids, water, vitamins, and minerals within the small intestine. Recent advances in research, along with new cutting-edge technologies, have advanced our understanding of the mechanism of ethanol's effect on intestinal nutrient absorption at the brush border membrane (BBM) of the small intestine. However, further studies are needed to delineate how ethanol consumption could have an impact on altered nutrient absorption under various disease conditions. Current research has elucidated the relationship of alcohol consumption on glucose, glutamine, vitamins B1 (thiamine), B2 (riboflavin), B9 (folate), C (ascorbic acid), selenium, iron, and zinc absorption within the small intestine. We conducted systematic computerized searches in PubMed using the following keywords: (1) "Alcohol effects on nutrient transport"; (2) "Alcohol mediated malabsorption of nutrients"; (3) "Alcohol effects on small intestinal nutrient transport"; and (4) "Alcohol mediated malabsorption of nutrients in small intestine". We included the relevant studies in this review. The main objective of this review is to marshal and analyze previously published research articles and discuss, in-depth, the understanding of ethanol's effect in modulating absorption of vital macro and micronutrients in health and disease conditions. This could ultimately provide great insights in the development of new therapeutic strategies to combat malnutrition associated with alcohol consumption.

Application of Population Balance Model to Simulate Precipitation of Weak Base and Zwitterionic Drugs in Gastrointestinal pH Environment

The purpose of the present study was to evaluate whether the population balance model (PBM) could be a suitable model for the precipitation of weak base and zwitterionic drugs in the gastrointestinal pH environment. Five poorly soluble drugs were used as model drugs (dipyridamole, haloperidol, papaverine, phenazopyridine, and tosufloxacin). PBM consists of the equations for primary nucleation, secondary nucleation, and particle growth. Each equation has two empirical parameters. The pH shift (pH-dumping) precipitation test (pH 3.0 to 6.5) was used to determine the model parameters for each drug. It was difficult to determine all six parameters by simultaneously fitting them to the precipitation profiles. Therefore, the number of model parameters was reduced from six to three by neglecting the secondary nucleation process and applying a common exponent number for the particle growth equation. Despite reducing the parameter number, PBM appropriately described the precipitation profiles in the pH shift tests. The constructed PBM model was then used to predict the precipitation profiles in an artificial stomach-intestine transfer (ASIT) test. PBM appropriately predicted the precipitation profiles in the ASIT test. These results suggested that PBM can be a suitable model to represent the precipitation of weak base and zwitterionic drugs in the gastrointestinal pH environment for biopharmaceutics modeling and simulation.

Impact of Gastric pH Variations on the Release of Amorphous Solid Dispersion Formulations Containing a Weakly Basic Drug and Enteric Polymers

Enteric polymers are widely used in amorphous solid dispersion (ASD) formulations. The aim of the current study was to explore ASD failure mechanisms across a wide range of pH conditions that mimic in vivo gastric compartment variations where enteric polymers such as hydroxypropyl methylcellulose phthalate (HPMCP) and hydroxypropyl methylcellulose acetate succinate (HPMCAS) are largely insoluble. Delamanid (DLM), a weakly basic drug used to treat tuberculosis, was selected as the model compound. Both DLM free base and the edisylate salt were formulated with HPMCP, while DLM edisylate ASDs were also prepared with different grades of HPMCAS. Two-stage release testing was conducted with the gastric stage pH varied between pH 1.6 and 5.0, prior to transfer to intestinal conditions of pH 6.5. ASD particles were collected following suspension in the gastric compartment and evaluated using X-ray powder diffraction and scanning electron microscopy. Additional samples were also evaluated with polarized light microscopy. In general, ASDs with HPMCP showed improved overall release for all testing conditions, relative to ASDs with HPMCAS. ASDs with the edisylate salt likewise outperformed those with DLM free base. Impaired release for certain formulations at intestinal pH conditions was attributed to surface drug crystallization that initiated during suspension in the gastric compartment where the polymer is insoluble; crystallization appeared more extensive for HPMCAS ASDs. These findings suggest that gastric pH variations should be evaluated for ASD formulations containing weakly basic drugs and enteric polymers.

Structural Modifications of Polyethylenimine to Control Drug Loading and Release Characteristics of Amorphous Solid Dispersions

Crystalline drugs with low solubility have the potential to benefit from delivery in the amorphous form. The polymers used in amorphous solid dispersions (ASDs) influence their maximum drug loading, solubility, dissolution rate, and physical stability. Herein, the influence of hydrophobicity of crosslinked polyethylenimine (PEI) is investigated for the delivery of the BCS class II nonsteroidal anti-inflammatory drug flufenamic acid (ffa). Several synthetic variables for crosslinking PEI with terephthaloyl chloride were manipulated: solvent, crosslinking density, reactant concentration, solution viscosity, reaction temperature, and molecular weight of the hyperbranched polymer. Benzoyl chloride was employed to cap amine groups to increase the hydrophobicity of the crosslinked materials. Amorphous deprotonated ffa was present in all ASDs; however, the increased hydrophobicity and reduced basicity from benzoyl functionalization led to a combination of amorphous deprotonated ffa and amorphous neutral ffa in the materials at high drug loadings (50 and 60 wt %). All ASDs demonstrated enhanced drug delivery in acidic media compared to crystalline ffa. Physical stability testing showed no evidence of crystallization after 29 weeks under various relative humidity conditions. These findings motivate the broadening of polymer classes employed in ASD formation to include polymers with very high functional group concentrations to enable loadings not readily achieved with existing polymers.

Serum and lymph pharmacokinetics of nilotinib delivered by yeast glucan particles per os

Nilotinib is a selective tyrosine-kinase inhibitor approved for the treatment of chronic myeloid leukemia. It is poorly soluble in aqueous media and has a low oral bioavailability. Nilotinib encapsulation into yeast glucan particles (GPs) was investigated in this work as a means of increasing bioavailability. The amorphization of nilotinib in GPs resulted in an increased dissolution rate, which was confirmed by in vitro experiments using biorelevant dissolution media. Simultaneously, GPs containing nilotinib were effectively taken up by macrophages, which was quantified in vitro on cell cultures. The overall oral bioavailability in a rat model was approximately 39 % for nilotinib delivered in a reference formulation (Tasigna) and was almost doubled when delivered in GPs. The contribution of glucan particles to the lymphatic transport of nilotinib was quantified. When delivered by GPs, cumulative nilotinib absorption via the lymphatic system increased by a factor of 10.8 compared to the reference, but still represented arelative bioavailability of only 1.12 %. The cumulative uptake of GPs in the lymph was found to be 0.54 mg after a single dose of 50 mg. Yeast glucan particles can therefore serve as a drug delivery vehicle with a dual function: dissolution rate enhancement by amorphization, and, to asmaller extent, lymphatic delivery due to macrophage uptake.

Evaluation and prediction of oral drug absorption and bioequivalence with food-drug interaction

This article reviews the impacts on the in vivo prediction of oral bioavailability (BA) and bioequivalence (BE) based on Biopharmaceutical classification systems (BCS) by the food-drug interaction (food effect) and the gastrointestinal (GI) environmental change. Various in vitro and in silico predictive methodologies have been used to expect the BA and BE of the test oral formulation. Food intake changes the GI physiology and environment, which affect oral drug absorption and its BE evaluation. Even though the pHs and bile acids in the GI tract would have significant influence on drug dissolution and, hence, oral drug absorption, those impacts largely depend on the physicochemical properties of oral medicine, active pharmaceutical ingredients (APIs). BCS class I and III drugs are high soluble drugs in the physiological pH range, food-drug interaction may not affect their BA. On the other hand, BCS class II and IV drugs have pH-dependent solubility, and the more bile acid secretion and the pH changes by food intake might affect their BA. In this report, the GI physiological changes between the fasted and fed states are described and the prediction on the oral drug absorption by food-drug interaction have been introduced.