Photo-induced enhanced Raman spectroscopy for universal ultra-trace detection of explosives, pollutants and biomolecules

Photo-induced-photo-catalytic SERS with silver-deposited TiO2 nanorods for ultrasensitive and sustainable detection of low Raman cross-section molecules

Surface-enhanced Raman spectroscopy (SERS) offers significant advantages, including label-free, non-invasive analysis and ultrasensitivity down to the single-molecule level, making it widely applicable in analytical chemistry and biology. However, its effectiveness is limited when detecting molecules with inherently low Raman scattering cross-sections, restricting its broader applications. In this study, we apply the photo-induced-photo-catalytic SERS (PI-PC SERS) technique, utilizing an Ag-deposited TiO2 nanorod (Ag/TiO2 NR) substrate to overcome this limitation. The PI-PC SERS technique combines two optoelectronic effects: photo-induced enhanced Raman scattering (PIERS) and the photocatalytic activity of the metal/semiconductor substrate. PIERS amplifies Raman signals beyond normal SERS, while the photocatalytic effect facilitates the removal of residual analytes. The PI-PC SERS process follows three sequential irradiation steps: (i) pre-irradiation with 365 nm UV light to activate PIERS, (ii) laser excitation at 785 nm to capture the enhanced Raman signal, and (iii) post-irradiation with 365 nm UV light to trigger photocatalytic degradation. Two low Raman cross-section molecules, 4-nitrophenol (a widely used pesticide) and urea (an important biomarker), were selected to evaluate the performance of the PI-PC SERS technique on the Ag/TiO2 NR substrate. The results demonstrated that PI-PC SERS not only enhanced detection sensitivity tenfold compared to normal SERS but also enabled self-cleaning by efficiently removing residual analytes after measurement, ensuring substrate reusability. These findings pave the way for advancing SERS-based techniques for detecting low Raman cross-section molecules while broadening their potential applications in chemical and biological sensing fields.

Insights of Surface-Enhanced Raman Spectroscopy Detection by Guiding Molecules into Nanostructures to Activate Hot Spots

A misunderstanding of how target molecules enter hot spot nanostructures has significantly hindered the advancement of surface-enhanced Raman spectroscopy (SERS) detection methods in recent years. The challenge lies in finding convenient ways to transport target molecules to various nanostructures. In this work, we discovered that filling the gaps in empty nanostructures with water is often difficult, as metal surfaces are not well wetted. Additionally, the adsorption of pollutants from the air reduces the water wettability within the nanogaps, severely restricting the diffusion of molecules in the hot spots. This study proposes a method that uses a binary solvent mixture of ethanol and water (EtOH-H2O) to effectively guide target molecules into the nanostructures containing numerous hot spots. By utilizing the tunable surface tension gradient of this binary solvent mixture, we can control solvent transport within the nanostructures, significantly enhancing the activity of the hot spots and increasing the efficiency of SERS detection. The detection limit of this simple and rapid binary solvent mixing method is improved by 2-3 orders of magnitude compared to traditional methods that use only water or ethanol as solvents while also demonstrating high reproducibility. This method can be widely applied to various nanostructures for different types of molecules, maximizing the efficient use of intrinsic hot spots. This innovative approach provides new momentum for the advancement of SERS technology and lays a solid foundation for its widespread adoption in various analytical applications.

Updated Insights Into the Mechanism of Salt-Induced Aggregation-Based Single-Molecule Surface-Enhanced Raman Spectroscopy

Since its discovery in 1997, the single molecule surface-enhanced Raman spectroscopy (SM-SERS) has attracted wide interest owing to its enormous potential in many fields. However, the commercialized applications of SM-SERS are still limited by the lack of a clear understanding of the relevant mechanism in the famous SM-SERS experiments. In this study, a salt-gradient model is proposed to deeply investigate the physical nature and update insights into the morphological, structural, and component evolution processes of Ag NPs from dispersed nanostructures to aggregation states in the salt-induced aggregation SERS strategy. A gradient interface is observed, where an ultrahigh sensitivity approaching a single molecule level, has been achieved in Ag colloidal system. An unusual dissolution of Ag, the release of Ag+ ions from Ag NPs, and the final precipitation of AgCl can be evidenced. Thus, except for aggregation effect, the active AgCl packaging shell on the surface of Ag NPs remarkably improves the SERS property. This work not only reveals the physics processes and nature of SM-SERS but also offers a new way to exploit the SM-SERS into practical applications by means of designing different surface states of NPs and various activation compositions to meet diverse molecule systems.

Nanoparticle-assisted plasmonic sensors: Recent developments in clinical applications

Nanotechnology is an important science that finds a wide range of applications from energy production to industrial production processes and biomedical applications. Nanoparti-cles, which are the most frequently preferred nanomaterials that form the basis of nanotechnolo-gy, are prepared with different composition, size, shape and surface chemistry to provide new techniques in applications in many different fields. The use of nanoparticles in the preparation of plasmonic sensors has increased the interest in plasmonic sensors such as surface plasmon resonance, electrochemical sensors, surface enhanced raman scattering and colorimetric sensors due to their increased sensing capacity on sensor surfaces. Plasmonic sensors are an important option in many different fields, such as medicine, environmental agriculture and food safety, thanks to their ability to solve a multitude of challenges. Because, plasmonic sensors are defined as sensing devices with important features such as sensitive and fast detection, no need for labels, real-time analysis, portability. In this review, the information about nanoparticles and their types and working principles of plasmonic sensors is given. Then, examples in clinical applications using different plasmonic sensors prepared with plasmonic nanoparticles are discussed in detail.

Long-lived photoexcitation probed by photo-induced enhanced Raman spectroscopy: unveiling charge dynamics in Ag-TiO2 nano-heterojunctions

This work explores Photo-Induced Enhanced Raman Spectroscopy (PIERS) as a tool to investigate charge carrier dynamics in nanometer-thick Ag-TiO2 heterojunctions with a Schottky barrier. Due to the light-induced charge transfer process at the semiconductor-metal interface, PIERS provides a significant signal enhancement over traditional Surface-Enhanced Raman Spectroscopy (SERS). In turn, a remarkably stable PIERS signal lasting over 10 days after UVC light illumination cannot be explained exclusively by the presence and the lifetime of the induced oxygen vacancies, so other features of the Ag-TiO2 heterojunction must be responsible for this effect. Time-resolved Raman spectroscopy, photoluminescence (PL), UV-Vis, XPS, and I-V characterization were used to explore charge migration mechanisms further to prove PIERS applicability. While PL showed rapid healing of oxygen vacancies, the correlation of the PIERS signal with changes in the Schottky barrier height and relative changes in the electron density under various lighting conditions indicates that both Hot Electron Injection (HEI) and Plasmon-Induced Resonance Energy Transfer (PIRET) are responsible for the Raman signal changes over time. We showed that both phenomena can be probed by in situ PIERS spectroscopy. This proof-of-principle paves the way for developing more advanced photoactive semiconductor-metal composites suitable for energy conversion or storage, as well as SERS and PIERS analytics.

ZIP-8/Ag-based size-selective SERS nanoplatform for ultrasensitive urea detection in milk samples: effects of analyte molecular dimensions on adsorption capacity and sensing performance

Being well-known as an excellent sorbent, metal-organic frameworks (MOFs) have been employed to intergrate with noble metal nanoparticles to fabricate active substrates for surface-enhance Raman spectroscopy (SERS) sensing applications. In this work, we employed three organic molecules with different molecular dimensions, including urea, methylene blue (MB) and Congo red (CR) for investigating SERS performance of a ZIP-8/Ag heterostructure. While every dimension of urea is smaller than the pore size of ZIP-8, MB and CR has one dimension larger than that of the pore size. The results show that only urea experienced large SERS enhancements on ZIP-8/Ag sensing platform. In contrast, MB and CR exhibited lower SERS intensity on ZIP-8/Ag than on pure Ag nanoparticle substrates. Adsorption capacities of those analyte were then calculated to confirm that urea could be adsorbed into ZIP-8/Ag at the best rate. The size-dependent mechanism of analyte adsorption and improving SERS signal was then confirmed using two other organic compounds: 4-nitrophenol (4-NP) and chloramphenicol (CAP). Thanks to the size-selective adsorption, small molecules such as urea and 4-NP can be effectively detected in the presence of large interfering molecules, which is useful for developing advanced SERS applications. The ZIP-8/Ag-based SERS sensor could detect urea at impressive concentrations as low as 1.48 × 10-10 M in standard solutions and 10-8 M in milk.

Synergizing PIERS and photocatalysis effects in a photo-responsive Ag/TiO2 nanostructure for an ultrasensitive and renewable PI-PC SERS technique

Surface-enhanced Raman spectroscopy (SERS) is a renowned analytical technique for non-invasive molecular identification. Advancements in SERS technology pivot on designing nano-structured substrates to enhance sensitivity and reliability. A key emerging trend involves integrating pre-treatment and post-treatment techniques on these substrates, leveraging advanced nanostructures to bring unique features, such as ultrasensitivity or reusability, to bridge the gap between laboratory and real-world applications of the SERS technique. Despite these advances, the synergistic application of pre- and post-treatment techniques on a single SERS substrate to fully exploit unique physicochemical effects remains underexplored. To address this, we introduce photo-induced-photo-catalytic SERS (PI-PC SERS), a novel technique that synergistically combines photo-induced enhanced Raman scattering (PIERS) and photocatalysis using a single Ag/TiO2 nanocomposite structure. This method aims to deliver ultrasensitive sensing capabilities and reusability. The PI-PC SERS technique involves pre-irradiating the SERS substrate with UV light to amplify the Raman signal and post-irradiating to remove fouled analytes. Pre-irradiation enhances the SERS signal by several orders of magnitude compared to normal SERS, attributed to the PIERS effect. Consequently, the detection sensitivity for methylene blue (MB) using PI-PC SERS reaches 1.02 × 10-14 M, significantly better than the 3.04 × 10-11 M achieved with normal SERS. Similar enhancements are observed for thiram, with a limit of detection (LOD) of 1.02 × 10-11 M for PI-PC SERS compared to 2.19 × 10-9 M for normal SERS. Additionally, post-irradiation facilitates the removal of analyte molecules via photocatalysis, restoring the substrate to its pristine state, as the byproducts - water and CO2 gas - are easily managed. Our findings demonstrate that PI-PC SERS creates ultrasensitive sensors and ensures substrate cleanliness and longevity. This method shows great promise for ultrasensitive, sustainable, and cost-effective applications in chemical sensing and molecular diagnostics.

Laser-induced the enhancement of Raman scattering performance in WO3-x/Ag composite films

Non-stoichiometric tungsten oxide (WO3-x) has controllable defects, high charge density, and good synergy with other materials to exhibit good surface-enhanced Raman scattering (SERS) properties. Its heterojunction structure provides an opportunity to develop high-quality and low-cost SERS substrates. This study obtained WO3-x/Ag composite thin films were obtained by Nd: YAG fiber pulsed laser modification at ambient conditions. The effects of interactions between heterojunctions and laser modification on the samples' morphology, composition, and optical properties were investigated. The absorption peaks exhibited a red shift by varying the laser scan speeds, and the SERS properties of the sample were evaluated by methylene blue (MB) dye. The results show that the laser-modified WO3-x/Ag films have good stability as SERS substrates. The characteristic peaks of MB can still be detected after 90 days in the air. The WO3-x/Ag films also have good homogeneity and a low detection limit, with a limit of detection (LOD) as low as 10-7 M, and an enhancement factor as high as 1.34 × 104. The simulated results by the finite difference in time domain (FDTD) showed substantial agreement with those of the experimental ones.

Impact of Surface Enhanced Raman Spectroscopy in Catalysis

Catalysis stands as an indispensable cornerstone of modern society, underpinning the production of over 80% of manufactured goods and driving over 90% of industrial chemical processes. As the demand for more efficient and sustainable processes grows, better catalysts are needed. Understanding the working principles of catalysts is key, and over the last 50 years, surface-enhanced Raman Spectroscopy (SERS) has become essential. Discovered in 1974, SERS has evolved into a mature and powerful analytical tool, transforming the way in which we detect molecules across disciplines. In catalysis, SERS has enabled insights into dynamic surface phenomena, facilitating the monitoring of the catalyst structure, adsorbate interactions, and reaction kinetics at very high spatial and temporal resolutions. This review explores the achievements as well as the future potential of SERS in the field of catalysis and energy conversion, thereby highlighting its role in advancing these critical areas of research.

Electric Field-Induced Enhanced Raman Spectroscopy Sensor and Photocatalysis with Thermoelectric-Plasmonic Metal Nanocomposites

Electric field-induced surface-enhanced Raman scattering (E-SERS) substrates have been proven to further enhance the attained Raman intensity. Herein, integrated with plasmonic Ag nanoparticles (Ag NPs), the thermoelectric Bi2Te3 plate as an E-SERS substrate decreased the limit of detection by 2 orders of magnitude and increased the SERS signal by >20 times compared to those without electrical field induction. The thermoelectric potential produced by the Bi2Te3 plate could modulate the electron density and subsequently change the Fermi level of Ag. This increases the resonant electron transition probability using a broad range of molecules. The plasmon-activated catalytic reactions of the interconversion between p-nitrothiophenol and p,p'-dimercaptoazobenzene could be controlled through the E-SERS template. On the basis of the finite element method, explicit theoretical analysis indicated that the Ag NP-Bi2Te3-molecule charge transfer could improve our understanding of the SERS and photocatalytic mechanism.

Sensitive SERS assay for L-cysteine based on functionalized silver nanoparticles

L-cysteine, an indispensable amino acid present in natural proteins, plays pivotal roles in various biological processes. Consequently, precise and selective monitoring of its concentrations is imperative. Herein, we propose a Surface-enhanced Raman Scattering (SERS) sensor for detecting L-cysteine based on the anti-aggregation of 4-mercaptobenzoic acid (4-MBA) and histidine (His) functionalized silver nanoparticles (Ag NPs). The presence of Hg2+ ions can induce the aggregation of Ag NPs@His@4-MBA due to the unique nanostructures of Ag NPs@His@4-MBA, resulting in a robust SERS intensity of 4-MBA. However, in the presence of L-cysteine, the stronger affinity between L-cysteine and Hg2+ reduces the concentration of free Hg2+, causing the dispersion of the aggregated functionalized Ag NPs and the reduction of the SERS signal intensity of 4-MBA. The developed SERS platform demonstrates excellent performance with a low detection limit of 5 nM (S/N = 3) and linear detection capabilities within the range of 0.01-100 μM for L-cysteine. Additionally, the method was successfully employed for the determination of L-cysteine in spiked serum samples, yielding recoveries ranging from 95.0 % to 108.1 % with relative standard deviations of less than 3.3 %. This study not only presents a novel approach for fabricating highly sensitive and specific SERS biosensors for biomolecule detection but also offers a significant strategy for the development and construction of SERS substrates using anti-aggregation design.

Photoinduced Electron-Transfer-Mediated Differential Recognition of Proteins on Plasmonic Surfaces

Photoinduced enhanced Raman spectroscopy (PIERS) has emerged as an efficient technique for enhancing the vibrational modes of analyte molecules adsorbed on a plasmonic nanoparticle-semiconductor hybrid material through chemical enhancement governed by electron transfer from the semiconductor to the plasmonic nanoparticles under an additional ultraviolet (UV) preirradiation step. The increase in chemical enhancement is imperative in analyzing and detecting pharmaceutically important moieties, such as amino acids and proteins, with a low Raman scattering cross section, even in complex biological environments. Herein, we demonstrate that UV preirradiation induced the creation of additional oxygen vacancies by introducing a low concentration (≈1%) of Ni as a dopant in the 2D platelike morphology of the BiOCl semiconductor; i.e., defect states in the semiconductor can induce charge transfer from the semiconductor to the plasmonic nanoparticles. This phenomenon facilitates electron transfer to the adsorbed analyte on the plasmonic surface. Additionally, we have shown the usefulness of this method in protein immobilization on the substrate surface, followed by the identification of a specific protein in the mixture of proteins. Proteins containing cysteine residues capture these electrons to form a surface-bound thiol group via a transient disulfide electron adduct radical. This allows differential binding of the protein molecules to the semiconductor plasmonic hybrid depending on the concentration of surface cysteine residues in proteins. Through PIERS and principal component analysis, we demonstrate the possibility of probing and distinguishing biomolecules based on their surface composition and secondary structure components even in their mixtures, thus paving the way for efficient analysis of complex biological systems.

Self-Modification of Defective TiO2 under Controlled H2/Ar Gas Environment and Dynamics of Photoinduced Surface Oxygen Vacancies

In recent years, defective TiO2 has caught considerable research attention because of its potential to overcome the limits of low visible light absorption and fast charge recombination present in pristine TiO2 photocatalysts. Among the different synthesis conditions for defective TiO2, ambient pressure hydrogenation with the addition of Ar as inert gas for safety purposes has been established as an easy method to realize the process. Whether the Ar gas might still influence the resulting photocatalytic properties and defective surface layer remains an open question. Here, we reveal that the gas flow ratio between H2 and Ar has a crucial impact on the defective structure as well as the photocatalyic activity of TiO2. In particular, transmission electron microscopy (TEM) in combination with electron energy loss spectroscopy (EELS) revealed a larger width of the defective surface layer when using a H2/Ar (50 %-50 %) gas mixture over pure H2. A possible reason could be the increase in dynamic viscosity of the gas mixture when Ar is added. Additionally, photoinduced enhanced Raman spectroscopy (PIERS) is implemented as a complementary approach to investigate the dynamics of the defective structures under ambient conditions which cannot be effortlessly realized by vacuum techniques like TEM.

Study for Photo-Induced Enhanced Raman Spectroscopy with Laser-Induced Periodic Surface Structures on Lithium Niobate on Insulator

Femtosecond laser irradiation (FLI) of laser-induced periodic surface structures (LIPSSs) has proven to be an efficient and robust strategy for surface modification in nanoscale. Lithium niobate on insulator (LNOI) retains the excellent optoelectric properties of bulk lithium niobate and features intrinsic roughness and defects, exhibiting promising potential in the applications of surface-enhanced Raman spectroscopy (SERS) and photo-induced enhancement Raman spectroscopy (PIERS). Herein, we proposed a novel LNOI-LIPSSs-AgNPs substrate that exhibited an increased SERS enhancement by a factor of 3.7 relative to that without LIPSSs. More remarkably, with UV pre-irradiation, a PIERS amplification up to 8.1 times in comparison to SERS was achieved. Detailed and comprehensive analyses of the enhancement mechanisms prove the synergy between the electromagnetic mechanism and chemical mechanism. Additionally, the PIERS substrate exhibits advantages of high-fabrication efficiency, long-term stability, excellent detection universality, and multicyclic self-cleaning ability, which may trigger new applications in various branches of analytical science.

Improved Surface-Enhanced Raman Scattering Performance of 2D Ti3C2Tx MXene Embedded in PVDF Film Enabled by Photoinduction and Electric Field Modulation

In this study, we introduce a synergistic approach to enhance the surface-enhanced Raman scattering (SERS) signal in two-dimensional (2D) MXene through photo-irradiation and electric field modulation. Our methodology involves the integration of 2D Ti3C2Tx MXene with piezoelectric polyvinylidene fluoride (PVDF) polymer, resulting in the creation of a free-standing, flexible composite film. On this composite film, a thin layer of Au was deposited. Our flexible substrate was able to sense methylene blue (MB), crystal violet (CV), 4-aminothiophenol (ATP), and melamine. The SERS substrate exhibits low detection limit of 10-8 M MB with a 6.7 × 106 enhancement factor (EF). The SERS substrate enables picomolar (pM) detection sensitivity for CV molecules with an EF of 9.2 × 109. Furthermore, the introduction of photo-irradiation leads to an additional ∼3.5-fold enhancement in the SERS signal, which is attributed to the altered work function and defects. The application of mechanical force to the piezoelectric PVDF/Ti3C2Tx film results in a ∼4.5-fold boost in SERS signal due to mechanical force-induced electrical energy. The fabrication strategy employed here for producing a flexible piezoelectric PVDF/Ti3C2Tx film holds significant promise for expanding the potential application of 2D MXene in rapid, on-site sensing scenarios.

Transferable G/Au Film for Constructing a Variety of SERS Substrates

Surface-enhanced Raman scattering (SERS), as one of the most powerful analytical methods, undertakes important inspection tasks in various fields. Generally, the performance of an SERS-active substrate relies heavily on its structure, which makes it difficult to integrate multiple-functional detectability on the same substrate. To address this problem, here we designed and constructed a film of graphene/Au nanoparticles (G/Au film) through a simple method, which can be conveniently transferred to different substrates to form various composite SERS substrates subsequently. By means of the combination of the electromagnetic enhancement mechanism (EM) and the chemical enhancement mechanism (CM) of this structure, the film realized good SERS performance experimentally, with the enhancement factor (EF) approaching ca. 1.40 × 105. In addition, the G/Au film had high mechanical strength and had large specific surface area and good biocompatibility that is beneficial for Raman detection. By further transferring the film to an Ag/Si composite substrate and PDMS flexible film, it showed enhanced sensitivity and in situ detectability, respectively, indicating high compatibility and promising prospect in Raman detection.

UV-resonant magnetoplasmonic properties of chemically synthesized indium nanoparticles

In this article, we for the first time demonstrate magnetoplasmonic properties of metallic indium (In0) nanoparticles, one of the promising non-noble metals for UV plasmonics, by using magnetic circular dichroism (MCD) spectroscopy. In0 nanoparticles are synthesized by a kinetically controlled reduction of indium salts, followed by performing centrifugation-based size selection, giving nanoparticles of 37.5 ± 9.7 or 51.6 ± 8.4 nm in diameter. These In0 nanoparticles exhibit a single extinction peak in the UV region (<300 nm), which can be attributed to localised surface plasmon resonance (LSPR), and upon increasing the particle size, the peak is red-shifted and broadened. The MCD signatures are then typical for circular magnetoplasmonic modes of metal nanospheres, and on the basis of the MCD responses, the effective mass of an electron (m*) of indium is estimated. Interestingly, although the large-sized In0 nanoparticles (51.6 nm) have a broader LSPR linewidth, the magneto-optical (MO) activity is larger than that of the smaller one (37.5 nm), which is unlike the behaviour of Ag nanospheres with high-quality-factor plasmonic performance. This can probably be due not only to the formation of stiff semiconducting (In(OH)3) shell layers on the In0 cores (= In0@In(OH)3 core-shell morphology) but also to the effect of the dielectric function of In0 that can influence the light-helicity-dependent field-induced cyclotron shift.

Reversible Thermoelectric Regulation of Electromagnetic and Chemical Enhancement for Rapid SERS Detection

Actively controlling surface-enhanced Raman scattering (SERS) performance plays a vital role in highly sensitive detection or in situ monitoring. Nevertheless, it is still challenging to achieve further modulation of electromagnetic enhancement and chemical enhancement simultaneously in SERS detection. In this study, a silver nanocavity structure with graphene as a spacer layer is coupled with thermoelectric semiconductor P-type gallium nitride (GaN) to form an electric-field-induced SERS (E-SERS) for dual enhancement. After applying the electric field, the intensity of SERS signals is further enhanced by over 10 times. The thermoelectric field enables fast and reproducible doping of graphene, thereby modulating its Fermi level over a wide range. The thermoelectric field also regulates the position of the plasmon resonance peak of the silver nanocavity structure, rendering synchronous dual electromagnetic and chemical regulation. Additionally, the method enables the trace detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). A detailed theoretical analysis is performed based on the experimental results and finite-element calculations, paving the way for the fabrication of high-efficient E-SERS substrates.

Porous carbon film/WO3-x nanosheets based SERS substrate combined with deep learning technique for molecule detection

The Surface-enhanced Raman scattering (SERS) is an attractive optical detecting method with high sensitivity and detectivity, however challenges on large-area signal uniformity and complex spectra analysis methods always retards its wide application. Herein, a highly sensitive and uniform SERS detection strategy supported by porous carbon film/WO3-x nanosheets (PorC/WO3-x) based noble-metal-free SERS substrate and deep learning algorithm are reported. Experimentally, the PorC/WO3-x substrate was prepared by high-temperature annealing the PorC/WO3 films under the argon atmosphere. The defect density of the WO3 was controlled by tuning the reducing reaction time during the annealing process. The SERS performance was evaluated by using R6G as the Raman reporter, it showed that the SERS intensity obtained on the substrate with the optimal annealing time of 3 h was about 8 times as high as that obtained on the PorC/WO3 substrate without annealing treatment. And detection limit of 10-7 M and Raman enhancement factor of 106 could be achieved. Moreover, the above optimal SERS substrate was utilized to detect flavonoids of quercetin, 3-hydroxyflavone and flavone, and a deep learning algorithms was incorporated to identify the quercetin. It revealed that quercetin can be accurately detected within the above flavonoids, and lowest detectable concentration of 10-5 M can be achieved.

Recent progress in SERS monitoring of photocatalytic reactions

Surface-enhanced Raman spectroscopy (SERS) is a powerful analytical technique renowned for its ultra-high sensitivity. Extensive research in SERS has led to the development of a wide range of SERS substrates, including plasmonic metals, semiconductors, metal organic frameworks, and their assemblies. Some of these materials are also excellent photocatalysts, and by taking advantage of their bifunctional characteristics, the photocatalytic processes that occur on their surface can be monitored in situ via SERS. This provides us with unique opportunities to gain valuable insights into the intricate details of the photocatalytic processes that are challenging to access using other techniques. In this review, we highlight key development in in situ and/or real-time SERS-tracking of photocatalytic reactions. We begin by providing a brief account of recent developments in SERS substrates, followed by discussions on how SERS can be used to elucidate crucial aspects of photocatalytic processes, including: (1) the influence of the surrounding media on charge carrier extraction; (2) the direction of charge carrier transfer; (3) the pathway of photocatalytic activation; and (4) differentiation between the effects of photo-thermal and energetic electrons. Additionally, we discuss the benefits of tip-enhanced Raman spectroscopy (TERS) due to the ability to achieve high-spatial-resolution measurements. Finally, we address major challenges and propose potential directions for the future of SERS monitoring of photocatalytic reactions. By leveraging the capabilities of SERS, we can uncover new insights into photocatalytic processes, paving the way for advancements in sustainable energy and environmental remediation.

Modulation of photo-induced Raman enhancement in Ag nanoparticles deposited on nanometer-thick TiO2 films. An interplay between plasmonic properties and irradiation energy

Photo-induced enhanced Raman spectroscopy (PIERS) is an innovative technology that offers additional enhancement in Raman signal compared to surface-enhanced Raman spectroscopy (SERS). In this study, we fabricated nanohybrids consisting of silver nanoparticles on an ultra-thin anatase film using a photoreduction method. This approach allowed for the controllable synthesis of SERS and PIERS nanoplatforms, characterized by oval-shaped nanoparticles, yet varying in size and surface coverage, leading to distinct plasmonic properties. A mere 15-minute UV pre-treatment with low photon density already initiated significant charge-transfer processes followed by Raman spectra under non-resonant conditions of the molecule and estimated by enhancement factor in the range of 12---17. This phenomenon was observed for a molecular monolayer of a thiol derivative. Not only boosting electron migration appeared. This unique interface of the Ag-anatase composite undoubtedly contributed to extended relaxation times of photo-induced enhancement. Furthermore, we investigated how plasmonic and morphological features of the nanoplatforms, in conjunction with UV and Vis illumination, modulated the migration of photoinduced electrons from the semiconductor to the metal. These findings highlighted the variety of processes contributing to the creation of efficient PIERS materials.

Exploring the length scales, timescales and chemistry of challenging materials (Part 2)

This themed issue explores the different length and timescales that determine the physics and chemistry of a variety of key of materials, explored from the perspective of a wide range of disciplines, including physics, chemistry materials science, Earth science and biochemistry. The topics discussed include catalysis, chemistry under extreme conditions, energy materials, amorphous and liquid structure, hybrid organic materials and biological materials. The issue is in two parts, with this second set of contributions exploring hybrid organic materials, catalysis low-dimensional and graphitic materials, biological materials and naturally occurring, super-hard material as well as dynamic high pressure and new developments in imaging techniques pressure. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 2)'.

Photo-induced enhanced Raman spectroscopy as a probe for photocatalytic surfaces

Photo-induced enhanced Raman spectroscopy (PIERS) has emerged as a highly sensitive surface-enhanced Raman spectroscopy (SERS) technique for the detection of ultra-low concentrations of organic molecules. The PIERS mechanism has been largely attributed to UV-induced formation of surface oxygen vacancies (Vo) in semiconductor materials, although alternative interpretations have been suggested. Very recently, PIERS has been proposed as a surface probe for photocatalytic materials, following Vo formation and healing kinetics. This work establishes comparison between PIERS and Vo-induced SERS approaches in defected noble-metal-free titanium dioxide (TiO2-x) films to further confirm the role of Vo in PIERS. Upon application of three post-treatment methods (namely UV-induction, vacuum annealing and argon etching), correlation of Vo kinetics and distribution could be established. A proposed mechanism and further discussion on PIERS as a probe to explore photocatalytic materials are also presented. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 2)'.

Photoactivated plasmonic nanohybrid fibers with prolonged trapping of excited charge carriers for SERS analysis of biomolecules

The quest to enhance Raman spectroscopic signals through the rational design of plasmonic substrates has enabled the detection and characterization of pharmaceutically important molecules with low scattering cross-sections, such as amino acids and proteins, and is helping in making forays into the diverse field of biomedical sciences. This work presents a simple strategy for synthesizing silver nanoparticles-incorporated alumina nanofibers (Ag-AlNFs) utilizing controlled microwave synthesis for enhancing the surface-enhanced Raman chemical enhancement factor through photo-induced charge accumulation at the plasmonic-dielectric interface. The plasmonic-dielectric fibers serve as excellent charge carrier trappers, as evident from the ultrafast transient absorption spectroscopy studies. Apart from chemical enhancement, the increase in electronic surface charge also enables the protein disulfide bonds to capture these electrons and form a transient disulfide electron adduct radical, which converts to free thiol radical on dissociation. This allows protein molecules to bind to the nanoparticle's surface with the favorable silver thiol bond leading to greater surface affinity and larger SERS enhancement. The proposed Ag-AlNFs represent a cost-effective material that can be potentially used to probe biological systems in a label-free manner by photoactivating the SERS substrate for obtaining higher enhancement factors.

Alloy Engineering Allows On-Demand Design of Ultrasensitive Monolayer Semiconductor SERS Substrates

The chemical mechanism (CM) of surface-enhanced Raman scattering (SERS) has been recognized as a decent approach to mildly amplify Raman scattering. However, the insufficient charge transfer (CT) between the SERS substrate and molecules always results in unsatisfying Raman enhancement, exerting a substantial restriction for CM-based SERS. In principle, CT is dominated by the coupling between the energy levels of a semiconductor-molecule system and the laser wavelength, whereas precise tuning of the energy levels is intrinsically difficult. Herein, two-dimensional transition-metal dichalcogenide alloys, whose energy levels can be precisely and continuously tuned over a wide range by simply adjusting their compositions, are investigated. The alloys enable on-demand construction of the CT resonance channels to cater to the requirements of a specific target molecule in SERS. The SERS signals are highly reproducible, and a clear view of the SERS dependences on the energy levels is revealed for different CT resonance terms.

Ultra-clean ternary Au/Ag/AgCl nanoclusters favoring cryogenic temperature-boosted broadband SERS ultrasensitive detection

Exploring multifunctional surface-enhanced Raman scattering (SERS) substrates with high sensitivity, broadband response property and reliable practicability should be required for ultrasensitive molecular detection in complex environments, which is heavily dependent on the photo-induced charge transfer (PICT) efficiency realized on the desirable nano-architectures. Herein, we introduce ultra-clean ternary Au/Ag/AgCl nanoclusters (NCs) with broadband resonance crossing the visible light to near-infrared region created by one step laser irradiation of mixed metal ion solution. Interestingly, the surface defects and interaction among these unique cluster-like ternary nanostructures would be further enhanced by thermal annealing treatment at 300°C, providing higher broadband SERS activities than the reference ternary nanoparticles under 457, 532, 633, 785, and 1064 nm wavelengths excitation. More importantly, the further promoted SERS activities of the resultant Au/Ag/AgCl NCs with achievable ∼5-fold enhancement than the initial one can be conventionally realized by simplistically declining the temperature from normal 20°C to cryogenic condition at about -196°C, due to the lower temperature-suppressed non-radiative recombination of lattice thermal phonons and photogenerated electrons. The cryogenic temperature-boosted SERS of the resultant Au/Ag/AgCl NCs enables the limit of detection (LOD) of folic acid (FA) biomolecules to be achieved as low as 10-12 M, which is obviously better than that of 10-9 M at room temperature condition. Overall, the smart Au/Ag/AgCl NCs-based broadband SERS sensor provides a new avenue for ultrasensitive biomolecular monitoring at cryogenic condition.

Biomimetic Ag/ZnO@PDMS Hybrid Nanorod Array-Mediated Photo-induced Enhanced Raman Spectroscopy Sensor for Quantitative and Visualized Analysis of Microplastics

Microplastics are persistent pollutants that accumulate in the environment and can cause serious toxicity to mammals. At present, few technologies are able to quantitatively detect chemicals and provide morphological information simultaneously. Herein, we developed a dragonfly-wing-mimicking ZnO nanorod array decorated with AgNPs on polydimethylsiloxane (PDMS) as a surface-enhanced Raman spectroscopy (SERS) and photo-induced enhanced Raman spectroscopy (PIERS) substrate for trace analysis of microplastics. The Ag/ZnO@PDMS hybrid nanorod array endows the sensor with high sensitivity and signal repeatability (RSD ∼ 5.89%), ensuring the reliable quantitative analysis of microplastics. Importantly, when the noble metal-semiconductor substrate was pre-radiated with ultraviolet light, a surprising PIERS was attained, achieving an additional enhancement of 11.3-fold higher than the normal SERS signal. By combining the PIERS technology with the "coffee ring effect", the sensor successfully discerned microplastics of polyethylene (PE) and polystyrene (PS) at a trace level of 25 μg/mL even with a portable Raman device. It was capable of identifying PS microspheres in contaminated tap water, lake water, river water, and seawater with detection limits of 25, 28, 35, and 60 μg/mL, respectively. The recovery rates of PS microspheres in four water environments ranged from 94.8 to 102.4%, with the RSD ranging from 2.40 to 6.81%. Moreover, quantitative and visualized detection of microplastics was readily realized by our sensor. This portable PIERS sensor represents a significant step toward the generalizability and practicality of quantitative and visual sensing technology.

Heteropolyacids: An Ultrasensitive Ionic Volume-Enhanced Raman Scattering Platform

Surface-enhanced Raman scattering (SERS) is regarded as the most direct and powerful tool to identify chemical fingerprints. However, current SERS substrate materials still face some critical challenges, including low molecular utilization efficiency and low selectivity. Herein, a novel oxygen vacancy heteropolyacid─H₁₀Fe₃Mo₂₁O₅₁ (HFMO)─is developed as a high-performance volume-enhanced Raman scattering (VERS)-active platform. Due to its merit of water solubility, HFMO forms a special coordination bond with the probe molecule at the molecular level, which allows its enhancing ability to be comparable to that of noble metals. An enhancement factor of 1.26 × 10⁹ and a very low detection limit of 10^-13 M for rhodamine 6G were obtained. A robust O-N coordination bond was formed between the anion of HFMO and the probe molecule, resulting in a special electron transfer path (Mo-O-N) with high selectivity, which is verified using X-ray photoelectron spectroscopy analysis and density functional theory calculations. That is to say, the proposed HFMO platform has excellent VERS enhancing effect, specifically for the molecules containing the imino group (e.g., methyl blue, detection limit: 10^-11 M), offering the merits of high reproducibility and uniformity, high-temperature resistance, long-time laser irradiation, and strong acid resistance. Such an initial effort on the ionic type VERS platform may enable the further development of highly sensitive, highly selective, and water-soluble VERS technology.

Material design, development, and trend for surface-enhanced Raman scattering substrates

Surface-enhanced Raman scattering (SERS) is a powerful and non-invasive spectroscopic technique that can provide rich and specific chemical fingerprint information for various target molecules through effective SERS substrates. In view of the strong dependence of the SERS signals on the properties of the SERS substrates, design, exploration, and construction of novel SERS-active nanomaterials with low cost and excellent performance as the SERS substrates have always been the foundation and the top priority for the development and application of the SERS technology. This review specifically focuses on the extensive progress made in the SERS-active nanomaterials and their enhancement mechanism since the first discovery of SERS on the nanostructured plasmonic metal substrates. The design principles, unique functions, and influencing factors on the SERS signals of different types of SERS-active nanomaterials are highlighted, and insight into their future challenge and development trends is also suggested. It is highly expected that this review could benefit a complete understanding of the research status of the SERS-active nanomaterials and arouse the research enthusiasm for them, leading to further development and wider application of the SERS technology.

Porous silicon decorated with Au/TiO2 nanocomposites for efficient photoinduced enhanced Raman spectroscopy

In this study, we investigated the potential of porous silicon (PSi) modified with Au/TiO₂ nanocomposites (NCPs) as a substrate for photoinduced enhanced Raman spectroscopy (PIERS). One-step pulsed laser-induced photolysis (PLIP) was used to embed Au/TiO₂ NCPs in the surface of PSi. Scanning electron microscopy revealed that adding TiO₂ nanoparticles (NPs) during PLIP led to the formation of predominantly spherical Au NPs with a diameter of approximately 20 nm. Furthermore, modifying the PSi substrate with Au/TiO₂ NCPs considerably enhanced the Raman signal of rhodamine 6G (R6G) after 4 h of ultraviolet (UV) irradiation. Real-time monitoring of the Raman signals of R6G at different concentrations under UV irradiation revealed that the amplitude of the signals increased with the irradiation time for R6G concentrations ranging from 10^-3 M to 10^-5 M. PSi substrates decorated with Au/TiO₂ NCPs may be used to develop materials for PIERS applications.

Ultraminiaturized Microfluidic Electrochemical Surface-Enhanced Raman Scattering Chip for Analysis of Neurotransmitters Fabricated by Ship-in-a-Bottle Integration

Electrochemical surface-enhanced Raman scattering (EC-SERS) is a promising technique for the diagnosis of trace amounts of neurotransmitters, because it can elucidate neurotransmitters' behavior on electrodes to deduce their functions in the human body. However, the current EC-SERS devices need several tens of milliliters of analyte solution to collect enough signal for analysis. Miniaturization of EC-SERS devices is crucial for the early diagnosis of disease and point-of-care testing. Herein, a new type of EC-SERS sensor based on 3D microfluidic chips for the analysis of neurotransmitters in ultrasmall volumes is proposed. The microfluidic EC-SERS chip is fabricated by a ship-in-a-bottle technique based on hybrid laser processing. The working electrode is modified using silver/zinc oxide materials, enabling the formation of a unique "candy apple" structure. To assess the fabricated microfluidic EC-SERS chips, ascorbic acid is analyzed using the ingenious microfluidic EC-SERS chips to elucidate its redox reaction by EC-SERS spectroscopy. Significantly, a sub-10 μL volume of analyte solution is sufficient for EC-SERS analysis, which is several orders smaller in volume than the requirements of current EC-SERS devices. The unprecedented microfluidic EC-SERS chips fabricated by the ship-in-a-bottle integration technique can be used in portable and smart analyzers for next-generation biomedicines and catalysts.

Signaling strategies of silver nanoparticles in optical and electrochemical biosensors: considering their potential for the point-of-care

Silver nanoparticles (AgNPs) have long been overshadowed by gold NPs' success in sensor and point-of-care (POC) applications. However, their unique physical, (electro)chemical, and optical properties make them excellently suited for such use, as long as their inherent higher instability toward oxidation is controlled. Recent advances in this field provide novel strategies that demonstrate that the AgNPs' inherent capabilities improve sensor performance and enable the specific detection of analytes at low concentrations. We provide an overview of these advances by focusing on the nanosized Ag (in the range of 1-100 nm) properties with emphasis on optical and electrochemical biosensors. Furthermore, we critically assess their potential for point-of-care sensors discussing advantages as well as limitations for each detection technique. We can conclude that, indeed, strategies using AgNP are ready for sensitive POC applications; however, research focusing on the simplification of assay procedures is direly needed for AgNPs to make the successful jump into actual applications.

A portable architectonics of Al/carbon nitride/metal-organic frameworks anchored Ag nanoparticles for SERS detection and photocatalytic degradation of fungicide

In recent years, it is urgent to develop bi-functional materials for highly sensitive SERS detection and photocatalytic degradation of contaminants in water of fish pond. Herein, using 5-mercapto-1-methyltetrazole as the ligand, the tree-trunk like zeolitic imidazolate framework (ZIF-8) is induced and in-situ grown on the surface of aluminum/flower carbon nitride (Al/f-C₃N₄). Then, AgNPs are tightly anchored in ZIF-8 of Al/f-C₃N₄/ZIF-8 by strong Ag-N and Ag-S bonds, and a portable architecture of Al/f-C₃N₄/ZIF-8/Ag is successfully prepared. Results indicate that the Al/f-C₃N₄/ZIF-8/Ag architecture exhibits excellent SERS activity and the detection limit can as low as 2.15 × 10^-11 mol⋅L^-1 for crystal violet (CV, a typical fungicide). Also, the Al/f-C₃N₄/ZIF-8/Ag substrate presents good photocatalytic activity for CV molecule, and the degradation efficiency reaches 98.58% after illumination for 90 min. This is mainly due to the good adsorption capacity of ZIF-8 which can enrich more CV molecules and pull them to "hot spots" generated by Ag in Al/f-C₃N₄/ZIF-8/Ag, and thus SERS response are enhanced significantly. Besides, the strong synergistic effect of f-C₃N₄, ZIF-8 and AgNPs is also important which facilitates the separation of photogenerated electrons and holes. Thus, the designed portable and bi-functional substrate could be used as a potential material for the detection and removal of CV in practical application.

Capillary Tube Surface-Enhanced Raman Scattering Substrate and High-Sensitivity Molecule Detection

Surface-enhanced Raman scattering (SERS) greatly improves molecule sensitivity compared with ordinary Raman spectroscopy. To excite and detect SERS efficiently, we fabricated glass-made microcapillary tubes decorated with silver nanoparticles inside them. The capillary tubes work as sample containers, where the required sample volume is in the order of a few nanoliters. The capillary tubes also play the role of optical waveguides. The tubes guide the excitation laser light through them so that the light illuminates whole silver nanoparticles inside the tubes at once. The tubes guide the SERS light to the tube end efficiently. The decoration of silver nanoparticles inside the tubes was performed by the silver mirror reaction. By making the tubes thinner and longer, highly sensitive SERS spectroscopy can be achieved. Our method would be a powerful tool for high-sensitivity molecule detection where the sample volume and concentration are extremely low.

Nanoscale Synergetic Effects on Ag-TiO2 Hybrid Substrate for Photoinduced Enhanced Raman Spectroscopy (PIERS) with Ultra-Sensitivity and Reusability

Here, a 4N-in-1 hybrid substrate concept (nanocolumnar structures, nanocrack network, nanoscale mixed oxide phases, and nanometallic structures) for ultra-sensitive and reliable photo-induced-enhanced Raman spectroscopy (PIERS), is proposed. The use of the 4N-in-1 hybrid substrate leads to an ≈50-fold enhancement over the normal surface-enhanced Raman spectroscopy, which is recorded as the highest PIERS enhancement to date. In addition to an improved Raman signal, the 4N-in-1 hybrid substrate provides a high detection sensitivity which may be attributed to the activation possibility at extremely low UV irradiation dosage and prolonged relaxation time (long measurement time). Moreover, the 4N-in-1 hybrid substrate exhibits a superior photocatalytic degradation performance of analytes, allowing its reuse at least 18 times without any loss of PIERS activity. The use of the 4N-in-1 concept can be adapted to biomedicine, forensic, and security fields easily.

One-pot fabrication of Mo1-xWxS2 alloy nanosheets as SERS substrates with highly Raman enhancement effect and long-term stability

A new Mo_1-xW_xS₂ two-dimensional nanosheets were prepared by the one-pot method. After certain Mo atoms in MoS₂ were replaced by W ones in a hydrothermal reduction procedure, Mo_1-xW_xS₂ was formed on the Mo foil. Well enhanced Mo_1-xW_xS₂ nanosheets were prepared when the sodium tungstate concentration got under control. Various characterizations were carried out, which indicate that Mo_1-xW_xS₂ nanosheets with good crystallinity. Compared with MoS₂, the Raman intensity of Rhodamine 6G (10^-6 M) was amplified by 1.7 times with Mo_1-xW_xS₂ nanosheets as the substrate. The characteristic Raman peaks could still be clearly distinguished until the concentration of Rhodamine 6G (R6G), Methylene blue (MB) and Crystal violet (CV) down to 10^-8, 10^-8 and 10^-7 M, respectively. With abundant edge active sites that facilitate charge transfer, Mo_1-xW_xS₂ nanosheets could better enhance SERS signals of target detection molecules and get a good linear relationship exists within the concentration and Raman peak strength. In addition, R6G SERS detection also shows excellent reproducibility and long-term stability of this TMDs SERS substrate.

Electromagnetic Mechanisms or Chemical Mechanisms? Role of Interfacial Charge Transfer in the Plasmonic Metal/Semiconductor Heterojunction

The plasmonic metal/semiconductor heterojunction provides a unique paradigm for manipulating light to improve the efficiency of plasmonic materials. Previous studies suggest that the improvement originates from the enhanced carrier exchanges between the plasmonic component of the heterojunction and molecules. This viewpoint, known as the chemical mechanism, is reasonable but insufficient, because the construction of the heterojunction will lead to a charge redistribution in the plasmonic component and cause changes in its physical characteristics. Herein, we will try to clarify that these changes are decisive factors in specific applications by investigating the surface-enhanced Raman scattering (SERS) behavior of a typical Ag/TiO₂ heterojunction. We observed significant changes in SERS spectra by modulating the band alignment of the heterojunction in a loop. Identical trends in SERS spectra were observed despite the fact that the charge transfer from the heterojunction to molecules was blocked, suggesting that the major SERS enhancement originates from electromagnetic mechanisms rather than chemical ones.

Attomolar detection of 4-aminothiophenol by SERS using silver nanodendrites decorated with gold nanoparticles

In the present work we report a simple, fast, reproducible and cheap methodology for surface enhanced Raman spectroscopy (SERS) substrate fabrication of silver dendritic nanostructures (prepared by electrodeposition) decorated with gold nanospheres by electrophoretic deposition. This is the first report where a metal dendritic nanostructure has been decorated with another type of metal nanoparticles by this technique. The decorated nanostructures were used directly as SERS substrate using 4-aminothiophenol (4-ATP) as analyte. The objective of the decoration is to create more hot-spots in order to detect the analyte in a lower concentration. Decorated nanodendrites had a detection limit one million times lower than bare silver nanodendrites and all the substrates showed an increase in the Raman intensity at concentrations below 1 nM; because this concentration corresponds to the threshold for the formation of a monolayer resulting in a triple mechanism of intensity increase, namely electric field, chemical factor and hot-spots. 4-ATP was detected in attomolar concentration, which is below 1 ppq, corresponding to an analytical enhancement factor in the order of 10¹⁵.

Shape controlled synthesis of concave octahedral Au@AuAg nanoparticles to improve their surface-enhanced Raman scattering performance

In this work, a seed mediated strategy has been proposed to design and fabricate uniform octahedral shaped gold@gold-silver nanoparticles (Au@AuAg NPs) with unique concave structure and an AuAg alloy shell. The morphology and Au/Ag ratio of the Au@AuAg nanostructures can be delicately controlled by varying the concentration of reagents, namely the Au nanorod (NR) seeds, HAuCl₄ and AgNO₃ precursor. Besides, the investigation of the growth mechanism revealed that the morphology of the product also can be controlled by tuning the growth time. Furthermore, uniformly arranged assemblies of concave octahedral Au@AuAg NPs were prepared through a solvent evaporation self-assembly strategy and employed as surface-enhanced Raman scattering (SERS) substrates, effectively applied to the analysis of R6G for the examination of SERS performance. Satisfyingly, owing to the synergistic effect between the Au and Ag elements and concave structure, concave octahedral Au@AuAg NPs exhibit significantly higher SERS enhancement compared with traditional octahedral Au NPs, which have an enhancement factor of ∼1.3 × 10⁷ and a detection limit as low as 10⁻¹⁰ M. Meanwhile, the SERS substrate reveals an excellent uniformity and reproducibility of the SERS performance. This work opens a new avenue toward bimetallic NPs with concave structure, which have broad application prospects in optics, SERS detection and other fields.

In this work, a seed mediated strategy has been proposed to design and fabricate uniform octahedral shaped gold@gold-silver nanoparticles (Au@AuAg NPs) with unique concave structure and an AuAg alloy shell.

New Mechanism for Long Photo-Induced Enhanced Raman Spectroscopy in Au Nanoparticles Embedded in TiO2

The photo-induced enhanced Raman spectroscopy (PIERS) effect is a phenomenon taking place when plasmonic nanoparticles deposited on a semiconductor are illuminated by UV light prior to Raman measurement. Results from the literature show that the PIERS effect lasts for about an hour. The proposed mechanism for this effect is the creation of oxygen vacancies in the semiconductor that would create a path for charge transfer between the analyte and the nanoparticles. However, this hypothesis has never been confirmed experimentally. Furthermore, the tested structure of the PIERS substrate has always been composed of plasmonic nanoparticles deposited on top of the semiconductor. Here, gold nanoparticles co-deposited with porous TiO₂ are used as a PIERS substrate. The deposition process confers the nanoparticles a unique position half buried in the nanoporous semiconductor. The resulting PIERS intensity is among the highest measured until now but most importantly the duration of the effect is significantly longer (at least 8 days). Cathodoluminescence measurements on these samples show that two distinct mechanisms are at stake for co-deposited and drop-casted gold nanoparticles. The oxygen vacancies hypothesis tends to be confirmed for the latter, but the narrowing of the depletion zone explains the long PIERS effect.

Glucose detection through surface-enhanced Raman spectroscopy: A review

Glucose detection is of vital importance to diabetes diagnosis and treatment. Optical approaches in glucose sensing have received much attention in recent years due to the relatively low cost, portable, and mini-invasive or non-invasive potentials. Surface enhanced Raman spectroscopy (SERS) endows the benefits of extremely high sensitivity because of enhanced signals and specificity due to the fingerprint of molecules of interest. However, the direct detection of glucose through SERS was challenging because of poor adsorption of glucose on bare metals and low cross section of glucose. In order to address these challenges, several approaches were proposed and utilized for glucose detection through SERS. This review article mainly focuses on the development of surface enhanced Raman scattering based glucose sensors in recent 10 years. The sensing mechanisms, rational design and sensing properties to glucose are reviewed. Two strategies are summarized as intrinsic sensing and extrinsic sensing. Four general categories for glucose sensing through SERS are discussed including SERS active platform, partition layer functionalized surface, boronic acid based sensors, and enzymatic reaction based biosensors. Finally, the challenges and outlook for SERS based glucose sensors are also presented.

Hydrophobic Wafer-Scale High-Reproducibility SERS Sensor Based on Silicon Nanorods Arrays Decorated with Au Nanoparticles for Pesticide Residue Detection

High sensitivity and reproducibility are highly desirable to a SERS sensor in diverse detection applications. Moreover, it is a great challenge to determine how to promote the target molecules to be more concentrated on the hotspots of the SERS substrate by engineering a surface with switching interfacial wettability. Along these lines, wafer-scale uniformly hydrophobic silicon nanorods arrays (SiNRs) decorated with Au nanoparticles were designed as the SERS substrate. Typically, the SERS substrate was fabricated by enforcing the polystyrene (PS) sphere self-assembly, as well as the plasma etching and the magnetron sputtering techniques. Consequently, the SERS substrate was treated by soaking within a n-dodecyl mercaptan (NDM) solution at different times in order to obtain adjustable wettabilities. By leveraging the electromagnetic enhancement resulted from the Au nanostructures and enrichment effect induced by the hydrophobicity, the SERS substrate is endowed with efficient SERS capabilities. During the detection of malachite green (MG), an ultralow relative standard deviation (RSD) 4.04-6.14% is achieved and the characteristic signal of 1172 cm-1 can be detected as low as 1 ng/mL. The proposed SiNRs' structure presents outstanding SERS activity with sensitivity and reproducibility rendering thus an ideal candidate for potential application in analytical detection fields.

MOF-Derived hierarchical porous 3D ZnO/Ag nanostructure as a reproducible SERS substrate for ultrasensitive detection of multiple environmental pollutants

The three-dimensional (3D) surface-enhanced Raman scattering (SERS) substrate for trace molecule detection has recently attracted considerable interest; however, these substrates generally either show poor sensitivity or require a complex preparation process. In this work, we have fabricated a 3D ZnO/Ag substrate using porous zeolite imidazole frameworks (ZIF-8) derived ZnO nanoparticles (NPs) followed by evaporation-induced self-assembly of Ag NPs over it, which can detect multiple environmental pollutants by a facile and cost-effective method. This 3D porous substrate showed an ultra-sensitivity for detecting various types of molecules, e.g., rhodamine 6G (R6G), crystal violet (CV), tetracycline, and thiram, simultaneously suggesting its generality. Notably, the lowest detectable concentration (LDC) attained for R6G is 10^-13 M, and the enhancement factor (EF) reaches up to 1.8 × 10⁸. The most important reason for ultra-sensitivity is that ZnO derived from ZIF-8 has a hierarchical porous structure and large surface area to provide more "hot spots" and absorb more probe molecules. Consequently, the ZnO/Ag nanostructures show excellent photocatalytic performance. The detected probe molecules could be completely degraded in situ within a short UV exposure time (<30 min), thereby enabling outstanding reusability of this substrate. Finite-different time-domain (FDTD) simulations were used to understand the underlying mechanism of the substrate by calculating electric fields and hot spot distributions. The simulations suggested that the widespread hot spots structures on the substrate are the main reason for its SERS ultra-sensitivity.

Latest Advances in Nanoplasmonics and Use of New Tools for Plasmonic Characterization

Nanoplasmonics is a research topic that takes advantage of the light coupling to electrons in metals, and can break the diffraction limit for light confinement into subwavelength zones allowing strong field enhancements [...]

Selenium Vacancies and Synergistic Effect of Near- and Far-Field-Enabled Ultrasensitive Surface-Enhanced Raman-Scattering-Active Substrates for Malaria Detection

Defect engineering with the active control of defect states brings remarkable enhancement on surface-enhanced Raman scattering (SERS) by magnifying semiconductor-molecule interaction. Such light-trapping architectures can increase the light path length, which promotes photon-analytes interactions and further improves the SERS sensitivity. However, by far the reported semiconductor SERS-active substrates based on these strategies are often nonuniform and commonly in the form of isolated laminates or random clusters, which limit their reliability and stability for practical applications. Herein, we develop self-grown single-crystalline "V-shape" SnSe_2-x (SnSe_1.5, SnSe_1.75, SnSe₂) nanoflake arrays (SnSe_2-x NFAs) with controlled selenium vacancies over large-area (10 cm × 10 cm) for ultrahigh-sensitivity SERS. First-principles density functional theory (DFT) is used to calculate the band gap and the electronic density of states (DOS). Based on the Herzberg-Teller theory regarding the vibronic coupling, the results of theoretical calculation reveal that the downshift of band edge and high DOS of SnSe_1.75 can effectively enhance the vibronic coupling within the SnSe_1.75-R6G system, which in turn enhances the photoinduced charge transfer resonance and contributes to the SERS activity with a remarkable enhancement factor of 1.68 × 10⁷. Furthermore, we propose and demonstrate ultrasensitive (10^-15 M for R6G), uniform, and reliable SERS substrates by forming SnSe_1.75 NFAs/Au heterostructures via a facile Au evaporation process. We attribute the superior performance of our SnSe_1.75 NFAs/Au heterostructures to the following reasons: (1) selenium vacancies and (2) synergistic effect of the near and far fields. In addition, we successfully build a detection platform to achieve rapid (∼15 min for the whole process), antibody-free, in situ, and reliable early malaria detection (100% detection rate for 10 samples with 160 points) in whole blood, and molecular hemozoin (<100/mL) can be detected. Our approach not only provides an efficient technique to obtain large-area, uniform, and reliable SERS-active substrates but also offers a substantial impact on addressing practical issues in many application scenarios such as the detection of insect-borne infectious diseases.

Defect engineering in semiconductor-based SERS

Semiconductor-based surface enhanced Raman spectroscopy (SERS) platforms take advantage of the multifaceted tunability of semiconductor materials to realize specialized sensing demands in a wide range of applications. However, until quite recently, semiconductor-based SERS materials have generally exhibited low activity compared to conventional noble metal substrates, with enhancement factors (EF) typically reaching 103, confining the study of semiconductor-based SERS to purely academic settings. In recent years, defect engineering has been proposed to effectively improve the SERS activity of semiconductor materials. Defective semiconductors can now achieve noble-metal-comparable SERS enhancement and exceedingly low, nano-molar detection concentrations towards certain molecules. The reason for such success is that defect engineering effectively harnesses the complex enhancement mechanisms behind the SERS phenomenon by purposefully tailoring many physicochemical parameters of semiconductors. In this perspective, we introduce the main defect engineering approaches used in SERS-activation, and discuss in depth the electromagnetic and chemical enhancement mechanisms (EM and CM, respectively) that are influenced by these defect engineering methods. We also introduce the applications that have been reported for defective semiconductor-based SERS platforms. With this perspective we aim to meet the imperative demand for a summary on the recent developments of SERS material design based on defect engineering of semiconductors, and highlight the attractive research and application prospects for semiconductor-based SERS.

Extraordinary approach to further boost plasmonic NIR-SERS by cryogenic temperature-suppressed non-radiative recombination

We report an effective strategy to promote the near-infrared surface-enhanced Raman scattering spectroscopy (NIR-SERS) activity by boosting the photon-induced charge transfer (PICT) efficiency at cryogenic temperature. Based on as-prepared Au/Ag nano-urchins (NUs) with abundant surface defects, the extremely low temperature (77 K) can significantly weaken the metallic lattice vibration and reduce the recombination of thermal phonons and photoexcited electrons, then accelerate the migration of energetic electrons. It enables the NIR-SERS detection limit of dye molecules to be achieved at 10^-17 M, which is nearly three orders of magnitude better than that at room temperature. The present work provides a new, to the best of our knowledge, approach for ultra-trace NIR-SERS bioanalysis.

Large-Area Nanosphere Self-Assembly Monolayers for Periodic Surface Nanostructures with Ultrasensitive and Spatially Uniform SERS Sensing

Colloidal lithography provides a rapid and low-cost approach to construct 2D periodic surface nanostructures. However, an impressive demonstration to prepare large-area colloidal template is still missing. Here, a high-efficient and flexible technique is proposed to fabricate self-assembly monolayers consisting of orderly-packed polystyrene spheres at air/water interface via ultrasonic spray. This "non-contact" technique exhibits great advantages in terms of scalability and adaptability due to its renitent interface dynamic balance. More importantly, this technique is not only competent for self-assembly of single-sized polystyrene spheres, but also for binary polystyrene spheres, completely reversing the current hard situation of preparing large-area self-assembly monolayers. As a representative application, hexagonal-packed silver-coated silicon nanorods array (Si-NRs@Ag) is developed as an ultrasensitive surface-enhanced Raman scattering (SERS) substrate with very low limit-of-detection for selective detection of explosive 2,4,6-trinitrotoluene down to femtomolar (10^-14 m) range. The periodicity and orderliness of the array allow hot spots to be designed and constructed in a homogeneous fashion, resulting in an incomparable uniformity and reproducibility of Raman signals. All these excellent properties come from the Si-NRs@Ag substrate based on the ordered structure, open surface, and wide-range electric field, providing a robust, consistent, and tunable platform for molecule trapping and SERS sensing for a wide range of organic molecules.

3D hierarchically porous magnetic molybdenum trioxide@gold nanospheres as a nanogap-enhanced Raman scattering biosensor for SARS-CoV-2

The global pandemic of COVID-19 is an example of how quickly a disease-causing virus can take root and threaten our civilization. Nowadays, ultrasensitive and rapid detection of contagious pathogens is in high demand. Here, we present a novel hierarchically porous 3-dimensional magnetic molybdenum trioxide-polydopamine-gold functionalized nanosphere (3D mag-MoO3-PDA@Au NS) composed of plasmonic, semiconductor, and magnetic nanoparticles as a multifunctional nanosculptured hybrid. Based on the synthesized 3D mag-MoO3-PDA@Au NS, a universal "plug and play" biosensor for pathogens is proposed. Specifically, a magnetically-induced nanogap-enhanced Raman scattering (MINERS) detection platform was developed using the 3D nanostructure. Through a magnetic actuation process, the MINERS system overcomes Raman signal stability and reproducibility challenges for the ultrasensitive detection of SARS-CoV-2 spike protein over a wide dynamic range up to a detection limit of 10-15 g mL-1. The proposed MINERS platform will facilitate the broader use of Raman spectroscopy as a powerful analytical detection tool in diverse fields.