Lock-and-key effect in the surface diffusion of large organic molecules probed by STM

Construction of metal-organic nanostructures and their structural transformations on metal surfaces

Metal-organic nanostructures, composed of organic molecules as building blocks and metal atoms as linkers, exhibit high reversibility and flexibility and open up new vistas for the creation of novel metal-organic nanomaterials and the fabrication of functional molecule-based nanodevices. With the rapid development of emerging surface science and scanning probe microscopy, various metal-organic nanostructures, ranging from zero to two dimensions, have been prepared with atomic precision on well-defined metal surfaces in a bottom-up manner and further visualized at the submolecular (or even atomic) level. In such processes, the metal-organic interactions involved and the synergy and competition of multiple intermolecular interactions have been clearly discriminated as the cause of the diversity and preference of metal-organic nanostructures. Moreover, structural transformations can be controllably directed by subtly tuning such intermolecular interactions. In this perspective, we review recent exciting progress in the construction of metal-organic nanostructures on metal surfaces ranging from zero to two dimensions, which is mainly in terms of the selection of metal types (including sources), in other words, different metal-organic interactions formed. Subsequently, the corresponding structural transformations in response to internal or external conditions are discussed, providing mechanistic insights into precise structural control, e.g., by means of metal/molecule stoichiometric ratios (including through scanning probe microscopy (SPM) manipulations), thermodynamic control, introduction of extrinsic competing counterparts, etc. In addition, some other regulatory factors, such as the functionalization of organic molecules and the choice of substrates and lattices, which also crucially govern the structural transformations, are briefly mentioned in each part. Finally, some potential perspectives for metal-organic nanostructures are evoked.

Gate-Switchable Molecular Diffusion on a Graphene Field-Effect Transistor

Controlling the surface diffusion of particles on 2D devices creates opportunities for advancing microscopic processes such as nanoassembly, thin-film growth, and catalysis. Here, we demonstrate the ability to control the diffusion of F4TCNQ molecules at the surface of clean graphene field-effect transistors (FETs) via electrostatic gating. Tuning the back-gate voltage (VG) of a graphene FET switches molecular adsorbates between negative and neutral charge states, leading to dramatic changes in their diffusion properties. Scanning tunneling microscopy measurements reveal that the diffusivity of neutral molecules decreases rapidly with a decreasing VG and involves rotational diffusion processes. The molecular diffusivity of negatively charged molecules, on the other hand, remains nearly constant over a wide range of applied VG values and is dominated by purely translational processes. First-principles density functional theory calculations confirm that the energy landscapes experienced by neutral vs charged molecules lead to diffusion behavior consistent with experiment. Gate-tunability of the diffusion barrier for F4TCNQ molecules on graphene enables graphene FETs to act as diffusion switches.

Self-Assembly of Molecular Landers Equipped with Functional Moieties on the Surface: A Mini Review

The bottom-up fabrication of supramolecular and self-assembly on various substrates has become an extremely relevant goal to achieve prospects in the development of nanodevices for electronic circuitry or sensors. One of the branches of this field is the self-assembly of functional molecular components driven through non-covalent interactions on the surfaces, such as van der Waals (vdW) interactions, hydrogen bonding (HB), electrostatic interactions, etc., allowing the controlled design of nanostructures that can satisfy the requirements of nanoengineering concepts. In this context, non-covalent interactions present opportunities that have been previously explored in several molecular systems adsorbed on surfaces, primarily due to their highly directional nature which facilitates the formation of well-ordered structures. Herein, we review a series of research works by combining STM (scanning tunneling microscopy) with theoretical calculations, to reveal the processes used in the area of self-assembly driven by molecule Landers equipped with functional groups on the metallic surfaces. Combining these processes is necessary for researchers to advance the self-assembly of supramolecular architectures driven by multiple non-covalent interactions on solid surfaces.

Revealing the Influence of Molecular Chemisorption Direction on the Reaction Selectivity of Dehalogenative Coupling on Au(111): Polymerization versus Cyclization

The control of reaction selectivity is of great interest in chemistry and depends crucially on the revelation of key influencing factors. Based on well-defined molecule-substrate model systems, various influencing factors have been elucidated, focusing primarily on the molecular precursors and the underlying substrates themselves, while interfacial properties have recently been shown to be essential as well. However, the influence of molecular chemisorption direction on reaction selectivity, as a subtle interplay between molecules and underlying substrates, remains elusive. In this work, by a combination of scanning tunneling microscopy imaging and density functional theory calculations, we report the influence of molecular chemisorption direction on the reaction selectivity of two types of dehalogenative coupling on Au(111), i.e., polymerization and cyclization, at the atomic level. The diffusion step of a reactive dehalogenated intermediate in two different chemisorption directions was theoretically revealed to be the key to determining the corresponding reaction selectivity. Our results highlight the important role of molecular chemisorption directions in regulating the on-surface dehalogenative coupling reaction pathways and products, which provides fundamental insights into the control of reaction selectivity by exploiting some subtle interfacial parameters in on-surface reactions for the fabrication of target low-dimensional carbon nanostructures.

Revealing the Orientation Selectivity of Tetrapyridyl-Substituted Porphyrins Constrained in Molecular "Klotski Puzzles"

Understanding and controlling molecular orientations in self-assembled organic nanostructures are crucial to the development of advanced functional nanodevices. Scanning tunneling microscopy (STM) provides a powerful toolbox to recognize molecular orientations and to induce orientation changes on surfaces at the single-molecule level. Enormous effort has been devoted to directly controlling the molecular orientations of isolated single molecules in free space. However, revealing and further controlling molecular orientation selectivity in constrained environments remain elusive. In this study, by a combination of STM imaging/manipulations and density functional theory calculations, we report the orientation selectivity of tetrapyridyl-substituted porphyrins in response to various local molecular environments in artificially constructed molecular "Klotski puzzles" on Au(111). With the assistance of STM lateral manipulations, "sliding-block" molecules were able to enter predefined positions, and specific molecular orientations were adopted to fit the local molecular environments, in which the intermolecular interaction was revealed to be the key to achieving the eventual molecular orientation selectivity. Our results demonstrate the essential role of local molecular environments in directing single-molecule orientations, which would shed light on the design of molecular structures to control preferred orientations for further applications in molecular nanodevices.

Flexible plasmonic nanocavities: a universal platform for the identification of molecular orientations

The molecular orientation provides fundamental images to understand molecular behaviors in chemistry. Herein, we propose and demonstrate sandwich plasmonic nanocavities as a surface-selection ruler to illustrate the molecular orientations by surface-enhanced Raman spectroscopy (SERS). The field vector in the plasmonic nanocavity presents a transverse spinning feature under specific excitations, allowing the facile modulation of the field polarizations to selectively amplify the Raman modes of the target molecules. It does not require the knowledge of the Raman spectrum of a bare molecule as a standard and thus can be extended as a universal ruler for the identification of molecular orientations. We investigated the most widely used Raman probe, Rhodamine 6G (R6G) on the Au surface and tried to clarify the arguments about its orientations from our perspectives. The experimental results suggest concentration-dependent adsorption configurations of R6G: it adsorbs on Au primarily via an ethylamine group with the xanthene ring lying flatly on the metal surface at low concentrations, and the molecular orientation gradually changes from "flat" to "upright" with the increase of molecular concentrations.

Unidirectional motion of C60-based nanovehicles using hybrid substrates with temperature gradient

With the synthesis of nanocar structures the idea of transporting energy and payloads on the surface became closer to reality. To eliminate the concern of diffusive surface motion of nanocars, in this study, we evaluate the motion of C₆₀ and C₆₀-based nanovehicles on graphene and hexagonal boron-nitride (BN) surfaces using molecular dynamics simulations and potential energy analysis. Utilizing the graphene-hBN hybrid substrate, it has been indicated that C₆₀ is more stable on boron-nitride impurity regions in the hybrid substrate and an energy barrier restricts the motion to the boron-nitride impurity. Increasing the temperature causes the molecule to overcome the energy barrier frequently. A nanoroad of boron-nitride with graphene sideways is designed to confine the surface motion of C₆₀ and nanovehicles at 300 K. As expected, the motion of all surface molecules is limited to the boron-nitride nanoroads. Although the motion is restricted to the boron-nitride nanoroad, the diffusive motion is still noticeable in lateral directions. To obtain the unidirectional motion for C₆₀ and nanocars on the surface, a temperature gradient is applied to the surface. The unidirectional transport to the nanoroad regions with a lower temperature occurs in a short period of time due to the lower energies of molecules on the colder parts.

Surface Diffusion Aided by a Chirality Change of Self-Assembled Oligomers under 2D Confinement

Chirality switching of self-assembled molecular structures is of potential interest for designing functional materials but is restricted by the strong interaction between the embedded molecules. Here, we report on an unusual approach based on reversible chirality changes of self-assembled oligomers using variable-temperature scanning tunneling microscopy supported by quantum mechanical calculations. Six functionalized diazomethanes each self-assemble into chiral wheel-shaped oligomers on Ag(111). At 130 K, a temperature far lower than expected, the oligomers change their chirality even though the molecules reside in an embedded self-assembled structure. Each chirality change is accompanied by a slight center-of-mass shift. We show how the identical activation energies of the two processes result from the interplay of the chirality change with surface diffusion, findings that open the possibility of implementing various functional materials from self-assembled supramolecular structures.

Through the Eyes of Creators: Observing Artificial Molecular Motors

Inspired by molecular motors in biology, there has been significant progress in building artificial molecular motors, using a number of quite distinct approaches. As the constructs become more sophisticated, there is also an increasing need to directly observe the motion of artificial motors at the nanoscale and to characterize their performance. Here, we review the most used methods that tackle those tasks. We aim to help experimentalists with an overview of the available tools used for different types of synthetic motors and to choose the method most suited for the size of a motor and the desired measurements, such as the generated force or distances in the moving system. Furthermore, for many envisioned applications of synthetic motors, it will be a requirement to guide and control directed motions. We therefore also provide a perspective on how motors can be observed on structures that allow for directional guidance, such as nanowires and microchannels. Thus, this Review facilitates the future research on synthetic molecular motors, where observations at a single-motor level and a detailed characterization of motion will promote applications.

Collective movement and thermal stability of fullerene clusters on the graphene layer

Understanding the motion characteristics of fullerene clusters on the graphene surface is critical for designing surface manipulation systems. Toward this purpose, using the molecular dynamics method, we evaluated six clusters of fullerenes including 1, 2, 3, 5, 10, and 25 molecules on the graphene surface, in the temperature range of 25 to 500 K. First, the surface motion of clusters is studied at 200 K and lower temperatures, in which fullerenes remain as a single group. The trajectories of the motion as well as the diffusion coefficients indicate the reduction of surface mobility as a response to the increase of the fullerene number. The clusters show normal diffusion at the temperature of 25 K, while they follow the super-diffusion regime at higher temperatures. The separation of fullerenes occurs at 300 K and higher temperatures. Due to the increase of vdW attraction with the increase of the fullerene number, the separation of fullerenes in larger clusters occurs at higher temperatures. The thermal energy at 500 K is sufficient to divide the large C60 clusters into smaller clusters. This energy level is related to the saturation of the interaction energy experienced by individual fullerenes, which can be estimated from the potential energy analysis. The results of simulations reveal that the separation occurs at the edge of clusters. Moreover, we studied the thermal stability of multilayer fullerene clusters on graphene. The simulation results indicate the tendency of multilayer clusters to locate on the surface, which implies the wetting property of C60s on the graphene layer.

Rotation in an Enantiospecific Self-Assembled Array of Molecular Raffle Wheels

Tailored nano-spaces can control enantioselective adsorption and molecular motion. We report on the spontaneous assembly of a dynamic system-a rigid kagome network with each pore occupied by a guest molecule-employing solely 2,6-bis(1H-pyrazol-1-yl)pyridine-4-carboxylic acid on Ag(111). The network cavity snugly hosts the chemically modified guest, bestows enantiomorphic adsorption and allows selective rotational motions. Temperature-dependent scanning tunnelling microscopy studies revealed distinct anchoring orientations of the guest unit switching with a 0.95 eV thermal barrier. H-bonding between the guest and the host transiently stabilises the rotating guest, as the flapper on a raffle wheel. Density functional theory investigations unravel the detailed molecular pirouette of the guest and how the energy landscape is determined by H-bond formation and breakage. The origin of the guest's enantiodirected, dynamic anchoring lies in the specific interplay of the kagome network and the silver surface.

Concluding remarks: current and next generation MOFs

This paper describes the content of my "Concluding remarks" talk at the Faraday Discussion meeting on "MOFs for energy and the environment" (online, 23-25 June 2021). The panel consisted of sessions on the design of MOFs and MOF hybrids (synthetic chemistry), their applications (e.g., capture, storage, separation, electrical devices, photocatalysis), advanced characterization (e.g., transmission electron microscopy, solid-state nuclear magnetic resonance), theory and modeling, and commercialization. MOF chemistry is undergoing a significant evolution from simply network chemistry to the chemistry of synergistic integration with heterogeneous materials involving other disciplines (we call this the fourth generation type). As reflected in the papers of the invited speakers and discussions with the participants, the present and future of this field will be described in detail.

Manifold dynamic non-covalent interactions for steering molecular assembly and cyclization

Deciphering rich non-covalent interactions that govern many chemical and biological processes is crucial for the design of drugs and controlling molecular assemblies and their chemical transformations. However, real-space characterization of these weak interactions in complex molecular architectures at the single bond level has been a longstanding challenge. Here, we employed bond-resolved scanning probe microscopy combined with an exhaustive structural search algorithm and quantum chemistry calculations to elucidate multiple non-covalent interactions that control the cohesive molecular clustering of well-designed precursor molecules and their chemical reactions. The presence of two flexible bromo-triphenyl moieties in the precursor leads to the assembly of distinct non-planar dimer and trimer clusters by manifold non-covalent interactions, including hydrogen bonding, halogen bonding, C-H⋯π and lone pair⋯π interactions. The dynamic nature of weak interactions allows for transforming dimers into energetically more favourable trimers as molecular density increases. The formation of trimers also facilitates thermally-triggered intermolecular Ullmann coupling reactions, while the disassembly of dimers favours intramolecular cyclization, as evidenced by bond-resolved imaging of metalorganic intermediates and final products. The richness of manifold non-covalent interactions offers unprecedented opportunities for controlling the assembly of complex molecular architectures and steering on-surface synthesis of quantum nanostructures.

Unveiling Adatoms in On-Surface Reactions: Combining Scanning Probe Microscopy with van't Hoff Plots

Scanning probe microscopy has become an essential tool to not only study pristine surfaces but also on-surface reactions and molecular self-assembly. Nonetheless, due to inherent limitations, some atoms or (parts of) molecules are either not imaged or cannot be unambiguously identified. Herein, we discuss the arrangement of two different nonplanar molecular assemblies of para-hexaphenyl-dicarbonitrile (Ph₆(CN)₂) on Au(111) based on a combined theoretical and experimental approach. For deposition of Ph₆(CN)₂ on Au(111) kept at room temperature, a rhombic nanoporous network stabilized by a combination of hydrogen bonding and antiparallel dipolar coupling is formed. Annealing at 575 K resulted in an irreversible thermal transformation into a hexagonal nanoporous network stabilized by native gold adatoms. However, the Au adatoms could neither be unequivocally identified by scanning tunneling microscopy nor by noncontact atomic force microscopy. By combining van't Hoff plots derived from our scanning probe images with our density functional theory calculations, we were able to confirm the presence of the elusive Au adatoms in the hexagonal molecular network.

Control of long-distance motion of single molecules on a surface

Spatial control over molecular movement is typically limited because motion at the atomic scale follows stochastic processes. We used scanning tunneling microscopy to bring single molecules into a stable orientation of high translational mobility where they moved along precisely defined tracks. Single dibromoterfluorene molecules moved over large distances of 150 nanometers with extremely high spatial precision of 0.1 angstrom across a silver (111) surface. The electrostatic nature of the effect enabled the selective application of repulsive and attractive forces to send or receive single molecules. The high control allows us to precisely move an individual and specific molecular entity between two separate probes, opening avenues for velocity measurements and thus energy dissipation studies of single molecules in real time during diffusion and collision.

Transmitting Stepwise Rotation among Three Molecule-Gear on the Au(111) Surface

The realization of a train of molecule-gears working under the tip of a scanning tunneling microscope (STM) requires a stable anchor of each molecule to the metal surface. Such an anchor can be promoted by a radical state of the molecule induced by a dissociation reaction. Our results, rationalized by density functional theory calculations, reveal that such an open radical state at the core of star-shaped pentaphenylcyclopentadiene (PPCP) favors anchoring. Furthermore, to allow the transmission of motion by STM manipulation, the molecule-gears should be equipped with specific groups facilitating the tip-molecule interactions. In our case, a tert-butyl group positioned at one tooth end of the gear benefits both the tip-induced manipulation and the monitoring of rotation. With this optimized molecule, we achieve reproducible and stepwise rotations of the single gears and transmit rotations for up to three interlocked units.

Nature inspired solid-liquid phase amphibious adhesive

Here we report a new class of bio-inspired solid-liquid adhesive, obtained by simple mechanical dispersion of PVDF (polyvinylidene fluoride) (solid spheres) into PDMS (polydimethylsiloxane) (liquid). The adhesive behavior arises from strong solid-liquid interactions. This is a chemical reaction free adhesive (no curing time) that can be repeatedly used and is capable of instantaneously joining a large number of diverse materials (metals, ceramic, and polymer) in air and underwater. The current work is a significant advance in the development of amphibious multifunctional adhesives and presents potential applications in a range of sealing applications, including medical ones.

Conformation Controls Mobility: 2H-Tetranaphthylporphyrins on Cu(111)

The adsorption behavior and the mobility of 2H‐Tetranaphthylporphyrin (2HTNP) on Cu(111) was investigated by scanning tunneling microscopy (STM) at room temperature (RT). The molecules adsorb, like the structurally related 2HTPP, in the “inverted” structure with the naphthyl plane restricted to an orientation parallel to the Cu surface. The orientation of the four naphthyl groups yields altogether 16 possible conformations. Due to the existence of rotamer pairs, 10 different appearances are expected on the surface, and all of them are identified by STM at RT. Most interestingly, the orientation of the naphthyl groups significantly influences the diffusion behavior of the molecules on Cu(111). We identify three different groups of conformers, which are either immobile, medium or fast diffusing at RT. The mobility seems to decrease with increasing size of the footprint of the conformers on the surface.

Peptide Capping Agent Design for Gold (111) Facet by Molecular Simulation and Experimental Approaches

The stochastic tunneling-basin hopping method (STUN-BH) was utilized to obtain the most stable peptide S7 configuration (Ac-Ser-Ser-Phe-Pro-Gln-Pro-Asn-CONH2) adsorbed on Au(111) facet. After the most stable S7 configuration was found, molecular dynamics (MD) simulation was conducted to investigate the thermal stability between S7 and Au facet at 300 K in both vacuum and water environment. Moreover, further design sets of peptide sequences on Au(111) facet were used to compare with S7. All molecular simulations were carried out by the large-scale atomic/molecular massively parallel simulator (LAMMPS). The Amber99sb-ILDN force field was employed for modeling the interatomic interaction of peptides, and the TIP3P water was used for the water environment. The CHARMM-METAL force field was introduced to model the S7, PF8 (Ac-Pro-Phe-Ser-Pro-Phe-Ser-Pro-Phe-CONH2) and FS8 (Ac-Phe-Ser-Phe-Ser-Phe-Ser-Phe-Ser-CONH2) interactions with Au(111). The MD simulation results demonstrate that the morphology of Pro affects the adsorption stability of Phe. Therefore, we designed two sequences, PF8 and FS8, to confirm our simulation result through experiment. The present study also develops a novel low-temperature plasma synthesis method to evaluate the facet selecting performance of the designed peptide sequences of S7, PF8, and FS8. The experimental results suggest that the reduced Au atom seed is captured with the designed peptide sequences and slowing growing under room temperature for 72 hours. The experimental results are in the excellent agreement with the simulation finding that the Pro in the designed peptide sequences plays a critical role in the facet selection for Au atom stacking.

How to control single-molecule rotation

The orientation of molecules is crucial in many chemical processes. Here, we report how single dipolar molecules can be oriented with maximum precision using the electric field of a scanning tunneling microscope. Rotation is found to occur around a fixed pivot point that is caused by the specific interaction of an oxygen atom in the molecule with the Ag(111) surface. Both directions of rotation are realized at will with 100% directionality. Consequently, the internal dipole moment of an individual molecule can be spatially mapped via its behavior in an applied electric field. The importance of the oxygen-surface interaction is demonstrated by the addition of a silver atom between a single molecule and the surface and the consequent loss of the pivot point.

Direct Imaging of the Induced-Fit Effect in Molecular Self-Assembly

Molecular recognition is a crucial driving force for molecular self-assembly. In many cases molecules arrange in the lowest energy configuration following a lock-and-key principle. When molecular flexibility comes into play, the induced-fit effect may govern the self-assembly. Here, the self-assembly of dicyanovinyl-hexathiophene (DCV6T) molecules, a prototype specie for highly efficient organic solar cells, on Au(111) by using low-temperature scanning tunneling microscopy and atomic force microscopy is investigated. DCV6T molecules assemble on the surface forming either islands or chains. In the islands the molecules are straight-the lowest energy configuration in gas phase-and expose the dicyano moieties to form hydrogen bonds with neighbor molecules. In contrast, the structure of DCV6T molecules in the chain assemblies deviates significantly from their gas-phase analogues. The seemingly energetically unfavorable bent geometry is enforced by hydrogen-bonding intermolecular interactions. Density functional theory calculations of molecular dimers quantitatively demonstrate that the deformation of individual molecules optimizes the intermolecular bonding structure. The intermolecular bonding energy thus drives the chain structure formation, which is an expression of the induced-fit effect.

Calculating free energies of organic molecules on insulating substrates

The challenges and limitations in calculating free energies and entropies of adsorption and interaction of organic molecules on an insulating substrate are discussed. The adhesion of 1,3,5-tri(4'-cyano-[1,1'-biphenyl]-4-yl)benzene (TCB) and 1,4-bis(4-cyanophenyl)-2,5-bis(decyloxy)benzene (CDB) molecules to step edges on the KCl(001) surface and the formation of molecular dimers were studied using classical molecular dynamics. Both molecules contain the same anchoring groups and benzene ring structures, yet differ in their flexibility. Therefore, the entropic contributions to their free energy differ, which affects surface processes. Using potential of mean force and thermodynamic integration techniques, free energy profiles and entropy changes were calculated for step adhesion and dimer formation of these molecules. However, converging these calculations is nontrivial and comes at large computational cost. We illustrate the difficulties as well as the possibilities of applying these methods towards understanding dynamic processes of organic molecules on insulating substrates.

Charge-State-Dependent Diffusion of Individual Gold Adatoms on Ionic Thin NaCl Films

It is known that individual metal atoms on insulating ionic films can occur in several different (meta)stable charge states, which can be reversibly switched in a controlled fashion. Here we show that the diffusion of gold adatoms on NaCl thin films depends critically on their charge state. Surprisingly, the anionic species has a lower diffusion barrier than the neutral one. Furthermore, for the former we observe that the diffusion atop a bilayer of NaCl is strongly influenced by the interface between NaCl and the underlying copper substrate. This effect disappears for a trilayer of NaCl. These observations open the prospect of controlling the diffusion properties of individual metal atoms on thin insulating films.

Coupling between diffusion and orientation of pentacene molecules on an organic surface

The realization of efficient organic electronic devices requires the controlled preparation of molecular thin films and heterostructures. As top-down structuring methods such as lithography cannot be applied to van der Waals bound materials, surface diffusion becomes a structure-determining factor that requires microscopic understanding. Scanning probe techniques provide atomic resolution, but are limited to observations of slow movements, and therefore constrained to low temperatures. In contrast, the helium-3 spin-echo (HeSE) technique achieves spatial and time resolution on the nm and ps scale, respectively, thus enabling measurements at elevated temperatures. Here we use HeSE to unveil the intricate motion of pentacene admolecules diffusing on a chemisorbed monolayer of pentacene on Cu(110) that serves as a stable, well-ordered organic model surface. We find that pentacene moves along rails parallel and perpendicular to the surface molecules. The experimental data are explained by admolecule rotation that enables a switching between diffusion directions, which extends our molecular level understanding of diffusion in complex organic systems.

Jump rates for surface diffusion of large molecules from first principles

We apply a recently developed stochastic model for the surface diffusion of large molecules to calculate jump rates for 9,10-dithioanthracene on a Cu(111) surface. The necessary input parameters for the stochastic model are calculated from first principles using density functional theory (DFT). We find that the inclusion of van der Waals corrections to the DFT energies is critical to obtain good agreement with experimental results for the adsorption geometry and energy barrier for diffusion. The predictions for jump rates in our model are in excellent agreement with measured values and show a marked improvement over transition state theory (TST). We find that the jump rate prefactor is reduced by an order of magnitude from the TST estimate due to frictional damping resulting from energy exchange with surface phonons, as well as a rotational mode of the diffusing molecule.

Controllable Scission and Seamless Stitching of Metal-Organic Clusters by STM Manipulation

Scanning tunneling microscopy (STM) manipulation techniques have proven to be a powerful method for advanced nanofabrication of artificial molecular architectures on surfaces. With increasing complexity of the studied systems, STM manipulations are then extended to more complicated structural motifs. Previously, the dissociation and construction of various motifs have been achieved, but only in a single direction. In this report, the controllable scission and seamless stitching of metal-organic clusters have been successfully achieved through STM manipulations. The system presented here includes two sorts of hierarchical interactions where coordination bonds hold the metal-organic elementary motifs while hydrogen bonds among elementary motifs are directly involved in bond breakage and re-formation. The key to making this reversible switching successful is the hydrogen bonding, which is comparatively facile to be broken for controllable scission, and, on the other hand, the directional characteristic of hydrogen bonding makes precise stitching feasible.

Stochastic models for surface diffusion of molecules

We derive a stochastic model for the surface diffusion of molecules, starting from the classical equations of motion for an N-atom molecule on a surface. The equation of motion becomes a generalized Langevin equation for the center of mass of the molecule, with a non-Markovian friction kernel. In the Markov approximation, a standard Langevin equation is recovered, and the effect of the molecular vibrations on the diffusion is seen to lead to an increase in the friction for center of mass motion. This effective friction has a simple form that depends on the curvature of the lowest energy diffusion path in the 3N-dimensional coordinate space. We also find that so long as the intramolecular forces are sufficiently strong, memory effects are usually not significant and the Markov approximation can be employed, resulting in a simple one-dimensional model that can account for the effect of the dynamics of the molecular vibrations on the diffusive motion.

Templating effects in molecular growth of blended films for efficient small-molecule photovoltaics

A strategy to control the molecular growth of coevaporated zinc phthalocyanine (ZnPc) and fullerene (C60) blended films for efficient organic photovoltaic (OPV) cells was demonstrated. Introduction of a 2,5-bis(4-biphenylyl)-bithiophene (BP2T) film or a ZnPc film on BP2T as nanostructured templates not only results in phase-separated domains in blended films with clear interpenetrating networks but also improves the crystallinity of ZnPc domains, both of which enhance photocurrent generation and charge carrier transport. Such morphology is strongly associated with the molecular growth of the templating layers. Roughness and adhesion of the templating layers are of great importance for the molecular growth of the blended films and in turn for cell characteristics. By carefully regulating the molecular growth of the blended films, the power conversion efficiency was improved by 125%, from 1.85 to 4.15% under 1 sun.

Bicomponent hydrogen-bonded nanostructures formed by two complementary molecular Landers on Au(111)

One- and two-dimensional structures formed by two Lander molecules on Au(111) via 3D-optimized or complementary triple H-bonding are studied by scanning tunneling microscopy and rationalized by numerical calculations.

Molecular self-assembly at solid surfaces

Self-assembly, the process by which objects initially distributed at random arrange into well-defined patterns exclusively due to their local mutual interactions without external intervention, is generally accepted to be the most promising method for large-scale fabrication of functional nanostructures. In particular, the ordering of molecular building-blocks deposited at solid surfaces is relevant for the performance of many organic electronic and optoelectronic devices, such as organic field-effect transistors (OFETs), organic light-emitting diodes (OLEDs) or photovoltaic solar cells. However, the fundamental knowledge on the nature and strength of the intermolecular and molecule-substrate interactions that govern the ordering of molecular adsorbates is, in many cases, rather scarce. In most cases, the structure and morphology of the organic-metal interface is not known and it is just assumed to be the same as in the bulk, thereby implicitly neglecting the role of the surface on the assembly. However, this approximation is usually not correct, and the evidence gathered over the last decades points towards an active role of the surface in the assembly, leading to self-assembled structures that only in a few occasions can be understood by considering just intermolecular interactions in solid or gas phases. In this work we review several examples from our recent research demonstrating the apparently endless variety of ways in which the surface might affect the assembly of organic adsorbates.

Molecular symmetry governs surface diffusion

In chemistry and physics symmetry principles are all important, for example, leading to the selection rules governing optical transitions. We have investigated the influence of the molecular symmetry on the surface potential landscape of molecules in the limit of weak molecule-substrate binding. For this purpose, the induced lateral motion of Cu(II)-tetraazaphthalocyanine molecules, for which four symmetry distinct isomers exist, on NaCl(100) was studied by scanning tunneling microscopy. This nonthermal diffusion induced by inelastic excitations is found to be qualitatively different for all four symmetry distinct isomers, demonstrating that symmetry governs the surface potential landscape.

Surface and defect structure of oxide nanowires on SrTiO3

Processing the SrTiO(3)(001) surface results in the self-assembly of reduced titanate nanowires whose widths are approximately 1 nm. We have imaged these nanowires and their defects at elevated temperatures by atomic resolution scanning tunneling microscopy. The nanowire structure is modeled with density functional theory, and defects observed in the center of the nanowire are determined to be Ti(4)O(3) vacancy clusters. The activation energy for Ti(4)O(3) vacancy cluster diffusion is explicitly measured as 4.98±0.17 eV with an exponential prefactor of μ=6.57×10(29) (s(-1).

Adsorption configuration effects on the surface diffusion of large organic molecules: the case of Violet Lander

Violet Lander (C(108)H(104)) is a large organic molecule that when deposited on Cu(110) surface exhibits lock-and-key like behavior [Otero et al., Nature Mater. 3, 779 (2004)]. In this work, we report a detailed fully atomistic molecular mechanics and molecular dynamics study of this phenomenon. Our results show that it has its physical basis on the interplay of the molecular hydrogens and the Cu(110) atomic spacing, which is a direct consequence of the matching between molecule and surface dimensions. This information could be used to find new molecules capable of displaying lock-and-key behavior with new potential applications in nanotechnology.

Supramolecular architectures on surfaces formed through hydrogen bonding optimized in three dimensions

Supramolecular self-assembly on surfaces, guided by hydrogen bonding interactions, has been widely studied, most often involving planar compounds confined directly onto surfaces in a planar two-dimensional (2-D) geometry and equipped with structurally rigid chemical functionalities to direct the self-assembly. In contrast, so-called molecular Landers are a class of compounds that exhibit a pronounced three-dimensional (3-D) structure once adsorbed on surfaces, arising from a molecular backboard equipped with bulky groups which act as spacer legs. Here we demonstrate the first examples of extended, hydrogen-bonded surface architectures formed from molecular Landers. Using high-resolution scanning tunnelling microscopy (STM) under well controlled ultrahigh vacuum conditions we characterize both one-dimensional (1-D) chains as well as five distinct long-range ordered 2-D supramolecular networks formed on a Au(111) surface from a specially designed Lander molecule equipped with dual diamino-triazine (DAT) functional moieties, enabling complementary NH...N hydrogen bonding. Most interestingly, comparison of experimental results to STM image calculations and molecular mechanics structural modeling demonstrates that the observed molecular Lander-DAT structures can be rationalized through characteristic intermolecular hydrogen bonding coupling motifs which would not have been possible in purely planar 2-D surface assembly because they involve pronounced 3-D optimization of the bonding configurations. The described 1-D and 2-D patterns of Lander-DAT molecules may potentially be used as extended molecular molds for the nucleation and growth of complex metallic nanostructures.

Time-resolved scanning tunnelling microscopy for molecular science

Time-resolved scanning tunnelling microscopy (STM) and its application in molecular science are reviewed. STM can image individual atoms and molecules and thus is able to observe the results of molecular processes such as diffusion, desorption, configuration switching, bond-breaking and chemistry, on the atomic scale. This review will introduce time-resolved STM, its experimental limitations and implementations with particular emphasis on thermally activated and tunnelling current induced molecular processes. It will briefly examine the push towards ultrafast imaging. In general, results achieved by time-resolved STM demonstrate the necessity of both space and time resolution for fully characterizing molecular processes on the atomic scale.

Functionalized truxenes: adsorption and diffusion of single molecules on the KBr(001) surface

In this work, we have studied the adsorption and diffusion of large functionalized organic molecules on an insulating ionic surface at room temperature using a noncontact atomic force microscope (NC-AFM) and theoretical modeling. Custom designed syn-5,10,15-tris(4-cyanophenylmethyl)truxene molecules are adsorbed onto the nanoscale structured KBr(001) surface at low coverages and imaged with atomic and molecular resolution with the NC-AFM. The molecules are observed rapidly diffusing along the perfect monolayer step edges and immobilized at monolayer kink sites. Extensive atomistic simulations elucidate the mechanisms of adsorption and diffusion of the molecule on the different surface features. The results of this study suggest methods of controlling the diffusion of adsorbates on insulating and nanostructured surfaces.