Microbicides: a new approach to preventing HIV and other sexually transmitted infections

Synthesis and Characterization of High Viscosity Cationic Poly(Proline-Epichlorohydrin) Composite Polymer with Antibacterial Functionalities

We report microbial resistance and catalytic activity of high viscosity cationic poly(proline-epichlorohydrin) composite (PRO-EPI) in the aqueous system. The PRO-EPI was prepared by a simple polycondensation, followed by FTIR, ¹H NMR, SEM, DLS, viscosity, and DSC/TGA characterization. Several concentrations of the PRO-EPI were tested against Gram-negative (E. coli and Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus) microorganisms. The antimicrobial screening revealed that PRO-EPI was a potent antimicrobial agent with the least inhibitory concentrations (MICs) of 128 µg/mL against Gram-negative microorganisms. The PRO-EPI indicated no inhibitory effect against Gram-positive microorganisms. It was determined that PRO-EPI contains polymeric-quaternary ammonium compounds that inactivate the Gram-negative microorganisms by a dual mode of action and carries domains for electrostatic interaction with the microbial membrane and an intracellular target. To study the removal of toxic industrial wastewater, congo red (CR) was tested using sodium borohydride as a reducing agent. Adsorption was achieved within 20 min at a rate constant of 0.92 ks⁻¹. UV–vis spectra showed that the removal of CR in the reaction solution was due to the breakup of the azo (–N=N–) bonds and adsorption of aromatic fragments. PRO is biodegradable and non-toxic, and PRO-EPI was found to be both antimicrobial and also acts as a catalyst for the removal of congo red dye.

Comparable Studies on Nanoscale Antibacterial Polymer Coatings Based on Different Coating Procedures

The antibacterial activity of different antibiotic and metal-free thin polymer coatings was investigated. The films comprised quaternary ammonium compounds (QAC) based on a vinyl benzyl chloride (VBC) building block. Two monomeric QAC of different alkyl chain lengths were prepared, and then polymerized by two different polymerization processes to apply them onto Ti surfaces. At first, the polymeric layer was generated directly on the surface by atom transfer radical polymerization (ATRP). For comparison purposes, in a classical route a copolymerization of the QAC-containing monomers with a metal adhesion mediating phosphonate (VBPOH) monomers was carried out and the Ti surfaces were coated via drop coating. The different coatings were characterized by X-ray photoelectron spectroscopy (XPS) illustrating a thickness in the nanomolecular range. The cytocompatibility in vitro was confirmed by both live/dead and WST-1 assay. The antimicrobial activity was evaluated by two different assays (CFU and BTG, resp.,), showing for both coating processes similar results to kill bacteria on contact. These antibacterial coatings present a simple method to protect metallic devices against microbial contamination.

Nanosystems Applied to HIV Infection: Prevention and Treatments

Sexually-transmitted infections (STIs) are a global health concern worldwide as they cause acute diseases, infertility, and significant mortality. Among the bacterial, viral, and parasitic pathogens that can be sexually transmitted, human immunodeficiency virus (HIV) has caused one of the most important pandemic diseases, which is acquired immune deficiency syndrome (AIDS). 32.7 million people have died from AIDS-related illnesses since the start of the epidemic. Moreover, in 2019, 38 million people were living with HIV worldwide. The need to deal with this viral infection becomes more obvious, because it represents not only a problem for public health, but also a substantial economic problem. In this context, it is necessary to focus efforts on developing methods for prevention, detection and treatment of HIV infections that significantly reduce the number of newly infected people and provide a better quality of life for patients. For several decades, biomedical research has been developed allowing quick solutions through the contribution of effective tools. One of them is the use of polymers as vehicles, drug carrier agents, or as macromolecular prodrugs. Moreover, nanosystems (NSs) play an especially important role in the diagnosis, prevention, and therapy against HIV infection. The purpose of this work is to review recent research into diverse NSs as potential candidates for prevention and treatment of HIV infection. Firstly, this review highlights the advantages of using nanosized structures for these medical applications. Furthermore, we provide an overview of different types of NSs used for preventing or combating HIV infection. Then, we briefly evaluate the most recent developments associated with prevention and treatment alternatives. Additionally, the implications of using different NSs are also addressed.

A Synthetic, Small, Sulfated Agent Is a Promising Inhibitor of Chlamydia spp. Infection in vivo

Chlamydia is the most frequently reported sexually transmitted bacteria causing 2.9 million infections annually in the United States. Diagnosis, treatment, and sequelae of chlamydial disease cost billions of dollars each year in the United States alone. Considering that a heparin sulfate-like cell surface receptor is involved in Chlamydia infections, we reasoned that sulfated and sulfonated mimics of heparin sulfate would be useful in topical prophylactic prevention of Chlamydia. In this study, we tested a small, synthetic sulfated agent sulfated pentagalloyl glucoside (SPGG) and three synthetic sulfonated polymers PSS and SPS with average molecular weight in the range of 11 to 1000 kDa for inhibition against Chlamydia. Infection of HeLa cells with C. muridarum or C. trachomatis in the presence of increasing concentrations of SPGG or sulfonated polymers were quantified by immunofluorescence of Chlamydia inclusions. To determine whether in vitro pre-treatment of SPGG inhibits infection of C. muridarum, HeLa monolayers were incubated with SPGG-containing media, and then infected with Chlamydia. Our in vitro results show that SPGG pre-treatment inhibits Chlamydia infection in a dose-dependent manner. In addition, we further determined if SPGG treatment has an inhibitory effect during infection, therefore cell monolayers were infected with C. muridarum in the concurrent presence of SPGG. Our results show that SPGG inhibits C. muridarum infection with an IC50 at 10 μg/ml levels. We also tested the inhibitory effect of synthetic polymers PSS and SPS against Chlamydia and found inhibition of C. muridarum and C. trachomatis infections with IC50 ranging from 0.3 to 0.8 μg/ml. SPGG, PSS, and SPS inhibit formation of Chlamydia inclusions in a concentration-dependent manner. For evaluation of in vivo efficacy of the most effective agent in blocking C. muridarum, SPGG, we intravaginally pre-treated mice with SPGG before infection with C. muridarum. Cervical swabs were collected post-infection to quantify Chlamydia inclusions in vitro. Our in vivo data show that the SPGG-treated group has a statistically significant reduction of infection compared to the no-treatment control. Overall, our results show that SPGG could serve as a promising topical inhibitor for preventing Chlamydia infection.

Submicron Matrices Embedded in a Polymeric Caplet for Extended Intravaginal Delivery of Zidovudine

In this study, an intravaginal delivery system able to deliver an anti-HIV-1 agent for the purpose of potentially reducing HIV-1 transmission acting over an extended duration was successfully formulated. This delivery system was a composite polymeric caplet comprising zidovudine-loaded polyethylene glycol enclatherated pectin-mucin submicron matrices embedded within a poly (D,L-lactide), magnesium stearate, Kollidon® SR, and Carbopol® 974P NF-based polymeric caplet matrix. A three-factor and three-level Box-Behnken statistical design was utilized to optimize the polymeric caplet. The optimized directly compressed composite polymeric caplet hardness was 22.1 ± 0.3 N and the matrix resilience was 62.4 ± 0.6%. The swelling- and diffusion-controlled fractional zidovudine (AZT) release from the optimized caplet was 0.74 ± 0.01 in simulated vaginal fluid (SVF), which increased to 0.81 ± 0.21 in phosphate-buffered saline (PBS) simulating seminal fluid, over 30 days. Caplet matrix swelling was directly related to the percentage Carbopol 974P NF composition. An intravaginal system for AZT delivery was tested in the pig model over 28 days. X-ray analysis depicted delivery system swelling with matrix contrast fading over time as vaginal fluid permeated the matrix core. Plasma, vaginal fluid swab eluates, and tissue AZT concentrations were measured by gradient ultra-performance liquid chromatography (UPLC)-tandem photodiode array detection. Vaginal tissue and vaginal fluid swab eluate AZT concentrations remained above effective levels over 28 days and were higher than plasma AZT concentrations, availing a system with reduced systemic toxicity and more effective inhibition of viral replication at the site of entry.

Application of nanotechnology for the development of microbicides

The vaginal route is increasingly being considered for both local and systemic delivery of drugs, especially those unsuitable for oral administration. One of the opportunities offered by this route but yet to be fully utilised is the administration of microbicides. Microbicides have an unprecedented potential for mitigating the global burden from HIV infection as heterosexual contact accounts for most of the new infections occurring in sub-Saharan Africa, the region with the highest prevalent rates. Decades of efforts and massive investment of resources into developing an ideal microbicide have resulted in disappointing outcomes, as attested by several clinical trials assessing the suitability of those formulated so far. The highly complex and multi-level biochemical interactions that must occur among the virus, host cells and the drug for transmission to be halted means that a less sophisticated approach to formulating a microbicide e.g. conventional gels, etc may have to give way for a different formulation approach. Nanotechnology has been identified to offer prospects for fabricating structures with high capability of disrupting HIV transmission. In this review, predominant challenges seen in microbicide development have been highlighted and possible ways of surmounting them suggested. Furthermore, formulations utilising some of these highly promising nanostructures such as liposomes, nanofibres and nanoparticles have been discussed. A perspective on how a tripartite collaboration among governments and their agencies, the pharmaceutical industry and academic scientists to facilitate the development of an ideal microbicide in a timely manner has also been briefly deliberated.

Antimicrobial and Hemolytic Studies of a Series of Polycations Bearing Quaternary Ammonium Moieties: Structural and Topological Effects

A series of polycations bearing quaternary ammonium moieties have shown antimicrobial activity against the Gram-negative bacterium Escherichia coli. Different polymer topologies governed by a disubstituted aromatic core as well as different diamine-based linkers were found to influence the antimicrobial properties. Moreover, the hemolytic activity against human red blood cells was measured and demonstrated good biocompatibility and selectivity of these polycations for bacteria over mammalian cells.

Multicompartmental Pharmacokinetic Model of Tenofovir Delivery to the Rectal Mucosa by an Enema

Rectal enemas that contain prophylactic levels of anti-HIV microbicides such as tenofovir have emerged as a promising dosage form to prevent sexually transmitted HIV infections. The enema vehicle is promising due to its likely ability to deliver a large amount of drug along the length of the rectal canal. Computational models of microbicide drug delivery by enemas can help their design process by determining key factors governing drug transport and, more specifically, the time history and degree of protection. They can also inform interpretations of experimental pharmacokinetic measures such as drug concentrations in biopsies. The present work begins rectal microbicide PK modeling, for enema vehicles. Results here show that a paramount factor in drug transport is the time of enema retention; direct connectivity between enema fluid and the fluid within rectal crypts is also important. Computations of the percentage of stromal volume protected by a single enema dose indicate that even with only a minute of enema retention, protection of 100% can be achieved after around 14 minutes post dose. Concentrations in biopsies are dependent on biopsy thickness; and control and/or knowledge of thickness could improve accuracy and decrease variability in biopsy measurements. Results here provide evidence that enemas are a promising dosage form for rectal microbicide delivery, and offer insights into their rational design.

Electrospun cellulose acetate phthalate nanofibrous scaffolds fabricated using novel solvent combinations biocompatible for primary chondrocytes and neurons

Electrospun nanofibres have been shown to exhibit extracellular matrix (ECM)-like characteristics required for tissue engineering in terms of porosity, flexibility, fibre organization and strength. This study focuses on developing novel cellulose acetate phthalate (CAP) scaffolds by electrospinning for establishing 3-D chondrocyte and neuronal cultures. Five solvent combinations were employed in fabricating the fibres, namely, acetone/ethanol (9:1), dimethylformamide/tetrahydrofuran/acetone (3:3:4), tetrahydrofuran/acetone (1:1), tetrahydrofuran/ethanol (1:1) and chloroform/methanol (1:1). The electrospun fibres were characterized by scanning electron microscopy (SEM) analysis and confirmed to be within the nanometre range. Based on the morphology of the fibers from SEM results, two solvent combinations such as acetone/ethanol and dimethylformamide/tetrahydrofuran/acetone were selected for stabilization as CAP exhibits a pH dependent solubility. Fourier-Transform Infrared (FTIR) analysis revealed the hydrolysis of CAP which was overcome by EDC [1-ethyl-3-(3-dimethylaminopropyl) carbodiimide] and EDC/NHS (N-hydroxysuccinimide) cross-linking resulting in its stability (pH of 7.2) for three months. MTT [3-(4, 5-dimethylthiazol-2-yl)-1, 5-diphenyltetrazolium bromide] assay performed using L6 myoblast confirmed the biocompatibility of the scaffolds. 3-D primary chondrocyte and neuronal cultures were established on the scaffolds and maintained for a period of 10 days. H&E staining and SEM analysis showed the attachment of the chondrocytes and neurons on CAP scaffolds prepared using dimethylformamide/tetrahydrofuran/acetone and acetone/ethanol respectively.

Rhizosecretion improves the production of Cyanovirin-N in Nicotiana tabacum through simplified downstream processing

Rhizosecretion has many advantages for the production of recombinant pharmaceuticals, notably facile downstream processing from hydroponic medium. The aim of this study was to increase yields of the HIV microbicide candidate, Cyanovirin-N (CV-N), obtained using this production platform and to develop a simplified methodology for its downstream processing from hydroponic medium. Placing hydroponic cultures on an orbital shaker more than doubled the concentration of CV-N in the hydroponic medium compared to plants which remained stationary, reaching a maximum of approximately 20μg/ml in one week, which is more than 3 times higher than previously reported yields. The protein composition of the hydroponic medium, the rhizosecretome, was characterised in plants cultured with or without the plant growth regulator alpha-napthaleneacetic acid by LC-ESI-MS/MS, and CV-N was the most abundant protein. The issue of large volumes in the rhizosecretion system was addressed by using ion exchange chromatography to concentrate CV-N and partially remove impurities. The semi-purified CV-N was demonstrated to bind to HIV gp120 in an ELISA and to neutralise HIVBa-L with an IC50 of 6nM in a cell-based assay. Rhizosecretion is therefore a practicable and inexpensive method for the production of functional CV-N.

Coupled gel spreading and diffusive transport models describing microbicidal drug delivery

Gels are a drug delivery platform that is being evaluated for application of active pharmaceutical ingredients, termed microbicides, that act topically against vaginal and rectal mucosal infection by sexually transmitted HIV. Despite success in one Phase IIb trial of a vaginal gel delivering tenofovir, problems of user adherence to designed gel application scheduling have compromised results in two other trials. The microbicides field is responding to this dilemma by expanding behavioral analysis of the determinants of adherence while simultaneously improving the pharmacological, biochemical, and biophysical analyses of the determinants of microbicide drug delivery. The intent is to combine results of these two complementary perspectives on microbicide performance and epidemiological success to create an improved product design paradigm. Central to both user sensory perceptions and preferences, key factors that underlie adherence, and to vaginal gel mucosal drug delivery, that underlies anti-HIV efficacy, are gel properties (e.g. rheology) and volume. The specific engineering problem to be solved here is to develop a model for how gel rheology and volume, interacting with loaded drug concentration, govern the transport of the microbicide drug tenofovir into the vaginal mucosa to its stromal layer. These are factors that can be controlled in microbicide gel design. The analysis here builds upon our current understanding of vaginal gel deployment and drug delivery, incorporating key features of the gel's environment, the vaginal canal, fluid production and subsequent gel dilution, and vaginal wall elasticity. These have not previously been included in the modeling of drug delivery. We consider the microbicide drug tenofovir, which is the drug most completely studied for gels: in vitro, in animal studies in vivo, and in human clinical trials with both vaginal or rectal gel application. Our goal is to contribute to improved biophysical and pharmacological understanding of gel functionality, providing a computational tool that can be used in future vaginal microbicide gel design.

Recent advances on anti-HIV vaginal delivery systems development

A review of the recent outcomes regarding technologies to prevent vaginal transmission of HIV, mainly by using antiretroviral (ARV) drugs formulated as microbicides. An introduction about the HIV transmission mechanisms by the vaginal route is included, together with the recent challenges faced for development of successful microbicide products. The outcomes of clinical evaluations are mentioned, and the different formulation strategies studied to-date, with the requirements, advantages, disadvantages and limitations of each dosage-form type, are presented. Finally, the recent attempts to apply various types of nanotechnologies in order to develop advanced microbicide-products and overcome existing limitations, are discussed.

Vaginal drug distribution modeling

This review presents and applies fundamental mass transport theory describing the diffusion and convection driven mass transport of drugs to the vaginal environment. It considers sources of variability in the predictions of the models. It illustrates use of model predictions of microbicide drug concentration distribution (pharmacokinetics) to gain insights about drug effectiveness in preventing HIV infection (pharmacodynamics). The modeling compares vaginal drug distributions after different gel dosage regimens, and it evaluates consequences of changes in gel viscosity due to aging. It compares vaginal mucosal concentration distributions of drugs delivered by gels vs. intravaginal rings. Finally, the modeling approach is used to compare vaginal drug distributions across species with differing vaginal dimensions. Deterministic models of drug mass transport into and throughout the vaginal environment can provide critical insights about the mechanisms and determinants of such transport. This knowledge, and the methodology that obtains it, can be applied and translated to multiple applications, involving the scientific underpinnings of vaginal drug distribution and the performance evaluation and design of products, and their dosage regimens, that achieve it.

Natural Plant Alkaloid (Emetine) Inhibits HIV-1 Replication by Interfering with Reverse Transcriptase Activity

Ipecac alkaloids are secondary metabolites produced in the medicinal plant Psychotria ipecacuanha. Emetine is the main alkaloid of ipecac and one of the active compounds in syrup of Ipecac with emetic property. Here we evaluated emetine’s potential as an antiviral agent against Human Immunodeficiency Virus. We performed in vitro Reverse Transcriptase (RT) Assay and Natural Endogenous Reverse Transcriptase Activity Assay (NERT) to evaluate HIV RT inhibition. Emetine molecular docking on HIV-1 RT was also analyzed. Phenotypic assays were performed in non-lymphocytic and in Peripheral Blood Mononuclear Cells (PBMC) with HIV-1 wild-type and HIV-harboring RT-resistant mutation to Nucleoside Reverse Transcriptase Inhibitors (M184V). Our results showed that HIV-1 RT was blocked in the presence of emetine in both models: in vitro reactions with isolated HIV-1 RT and intravirion, measured by NERT. Emetine revealed a strong potential of inhibiting HIV-1 replication in both cellular models, reaching 80% of reduction in HIV-1 infection, with low cytotoxic effect. Emetine also blocked HIV-1 infection of RT M184V mutant. These results suggest that emetine is able to penetrate in intact HIV particles, and bind and block reverse transcription reaction, suggesting that it can be used as anti-HIV microbicide. Taken together, our findings provide additional pharmacological information on the potential therapeutic effects of emetine.

Vaginal deployment and tenofovir delivery by microbicide gels

Gels are one of the soft material platforms being evaluated to deliver topically acting anti-HIV drugs (microbicides) to the vaginal environment. For each drug, its loaded concentration, gel properties and applied volume, and frequency of dosing can be designed to optimize PK and, thence, PD. These factors also impact user sensory perceptions and acceptability. Deterministic compartmental modeling of vaginal deployment and drug delivery achieved by test gels can help delineate how multiple parameters characterizing drug, vehicle, vaginal environment, and dosing govern details of PK and PD and also gel leakage from the canal. Such microbicide delivery is a transport process combining convection, e.g., from gel spreading along the vaginal canal, with drug diffusion in multiple compartments, including gel, mucosal epithelium, and stroma. The present work builds upon prior models of gel coating flows and drug diffusion (without convection) in the vaginal environment. It combines and extends these initial approaches in several key ways, including: (1) linking convective drug transport due to gel spreading with drug diffusion and (2) accounting for natural variations in dimensions of the canal and the site of gel placement therein. Results are obtained for a leading microbicide drug, tenofovir, delivered by three prototype microbicide gels, with a range of rheological properties. The model includes phosphorylation of tenofovir to tenofovir diphosphate (which manifests reverse transcriptase activity in host cells), the stromal concentration distributions of which are related to reference prophylactic values against HIV. This yields a computed summary measure related to gel protection ("percent protected"). Analyses illustrate tradeoffs amongst gel properties, drug loading, volume and site of placement, and vaginal dimensions, in the time and space history of gel distribution and tenofovir transport to sites of its anti-HIV action and concentrations and potential prophylactic actions of tenofovir diphosphate therein.

Engineering a degradable polyurethane intravaginal ring for sustained delivery of dapivirine

We describe the engineering of a degradable intravaginal ring (IVR) for the delivery of the potent HIV-1 reverse transcriptase inhibitor dapivirine. The degradable polymer used in fabricating the device incorporated poly(caprolactone) ester blocks in a poly(tetramethylene ether) glycol ABA type polyurethane backbone. The polymer was designed to maintain its structure for 1 month during usage and then degrade in the environment post-disposal. In vitro release of dapivirine showed zero-order kinetics for up to 1 month and significant levels of drug release into engineered vaginal tissue. The mechanical properties of the degradable IVR were comparable to those of a widely used contraceptive intravaginal ring upon exposure to simulated vaginal conditions. Incubation under simulated vaginal conditions for a month caused minimal degradation with minimal effect on the mechanical properties of the ring and polymer. The cytotoxicity evaluation of the drug-loaded IVRs against Vk2/E6E7 human vaginal epithelial cells, Lactobacillus jensenii, and engineered vaginal tissue constructs showed the degradable polyurethane to be non-toxic. In vitro evaluation of inflammatory potential monitored through the levels of inflammatory cytokines IL-8, IL-1α, IL-6, IL-1β, and MIP-3α when engineered EpiVaginal™ tissue was incubated with the polyurethanes suggested that the degradable polyurethane was comparable to commercial medical grade polyurethane. These results are encouraging for further development of this degradable IVR for topical vaginal delivery of microbicides.

Antimicrobial polymeric materials with quaternary ammonium and phosphonium salts

Polymeric materials containing quaternary ammonium and/or phosphonium salts have been extensively studied and applied to a variety of antimicrobial-relevant areas. With various architectures, polymeric quaternary ammonium/phosphonium salts were prepared using different approaches, exhibiting different antimicrobial activities and potential applications. This review focuses on the state of the art of antimicrobial polymers with quaternary ammonium/phosphonium salts. In particular, it discusses the structure and synthesis method, mechanisms of antimicrobial action, and the comparison of antimicrobial performance between these two kinds of polymers.

Firmness Perception Influences Women's Preferences for Vaginal Suppositories

Microbicides are being actively researched and developed as woman-initiated means to prevent HIV transmission during unprotected coitus. Along with safety and efficacy, assessing and improving compliance is a major area of research in microbicide development. We have developed carrageenan-based semisoft vaginal suppositories and have previously evaluated how physical properties such as firmness, size and shape influence women’s willingness to try them. Firmness has previously been quantified in terms of small-strain storage modulus, G’, however large-strain properties of the gels may also play a role in the firmness perception. In the current study we prepared two sets of suppositories with the same G’ but different elongation properties at four different G’ values (250, 2500, 12,500, 25,000 Pa): For convenience we refer to these as “brittle” and “elastic”, although these terms were never provided to study participants. In the first of two tests conducted to assess preference, women compared pairs of brittle and elastic suppositories and indicated their preference. We observed an interaction, as women preferred brittle suppositories at lower G’ (250, 2500 Pa) and elastic ones at a higher G’ (25,000 Pa). In the second test, women evaluated samples across different G’, rated the ease-of-insertion and willingness-to-try and ranked the samples in order of preference. Brittle suppositories at G’ of 12,500 Pa were most preferred. In vitro studies were also conducted to measure the softening of the suppositories in contact with vaginal simulant fluid (VSF). Release of antiretroviral drug tenofovir in VSF was quantified for the brittle and elastic suppositories at G’ of 12,500 Pa to determine the effect of suppository type on release. The initial rate of release was 20% slower with elastic suppositories as compared to brittle suppositories. Understanding how different physical properties simultaneously affect women’s preferences and pharmacological efficacy in terms of drug release is required for the optimization of highly acceptable and efficacious microbicides.

Relationships between perceptual attributes and rheology in over-the-counter vaginal products: a potential tool for microbicide development

Vaginal microbicides are believed to have substantial potential to empower women to protect themselves from HIV, although clinical trials to date have had mixed results at best. Issues with patient adherence in these trials suggest additional emphasis should be placed on optimizing acceptability. Acceptability is driven, in part, by the sensory properties of the microbicide, so better understanding of the relationships between sensory properties and the physical and rheological properties of microbicides should facilitate the simultaneous optimization of sensory properties in parallel with the biophysical properties required for drug deployment. Recently, we have applied standard methods to assess the potential acceptability of microbicide prototypes ex vivo and to quantify the sensory properties of microbicide surrogates. Here, we link quantitative perceptual data to the rheological properties of 6 over-the counter (OTC) vaginal products used as ex vivo microbicide surrogates. Shear-thinning behavior (n) and tan δ (10 rad/s) showed no relationship with any perceptual attributes while shear storage modulus, G’ (10 rad/s) was correlated with some attributes, but did not appear to be a strong predictor of sensory properties. Conversely, the storage loss modulus, G” (10 rad/s) and the consistency coefficient, K, were correlated with several sensory attributes: stickiness, rubberiness, and uniform thickness for G’’ and stickiness, rubberiness, and peaking for K. Although these relationships merit confirmation in later studies, this pilot study suggests rheological principles can be used to understand the sensory properties evoked by microbicide surrogates assessed ex vivo. Additional work is needed to determine if these findings would apply for microbicides in vivo.

Release of tenofovir from carrageenan-based vaginal suppositories

Microbicides are an active area of research for HIV prevention, being developed as a woman-initiated method of prevention during unprotected coitus. Along with safety and efficacy, assessing and improving compliance is a major area of research in microbicide development. We have produced microbicide prototypes in the form of semisoft vaginal suppositories prepared from carrageenan and conducted both qualitative and quantitative studies using these prototypes to determine the physical properties that drive acceptability and possibly adherence. In order to ensure that the suppositories function as effective drug delivery vehicles, we have conducted in vitro dissolution studies in water, vaginal simulant fluid (VSF) and semen simulant fluid (SSF) with suppositories loaded with the antiretroviral drug, tenofovir (TFV). TFV was released via diffusion and matrix erosion in water or by diffusion out of the matrix in VSF and SSF. Diffusion studies were conducted in two different volumes of VSF and SSF. The volume of VSF/SSF into which TFV diffused and the size of the suppositories determined the rate of diffusion from the suppositories. About 45%–50% of the encapsulated TFV diffused out of the suppositories within the first two hours, irrespective of suppository size, diffusion medium (VSF/SSF) and the volume of medium. Prior work indicates that a short waiting period between insertion and coitus is highly desired by women; present data suggest our microbicide prototypes have rapid initial release followed by a slow release curve over the first 24 h.

Nanoparticle incorporation of melittin reduces sperm and vaginal epithelium cytotoxicity

Melittin is a cytolytic peptide component of bee venom which rapidly integrates into lipid bilayers and forms pores resulting in osmotic lysis. While the therapeutic utility of free melittin is limited by its cytotoxicity, incorporation of melittin into the lipid shell of a perfluorocarbon nanoparticle has been shown to reduce its toxicity in vivo. Our group has previously demonstrated that perfluorocarbon nanoparticles containing melittin at concentrations <10 µM inhibit HIV infectivity in vitro. In the current study, we assessed the impact of blank and melittin-containing perfluorocarbon nanoparticles on sperm motility and the viability of both sperm and vaginal epithelial cells. We found that free melittin was toxic to sperm and vaginal epithelium at concentrations greater than 2 µM (p<0.001). However, melittin nanoparticles were not cytotoxic to sperm (p = 0.42) or vaginal epithelium (p = 0.48) at an equivalent melittin concentration of 10 µM. Thus, nanoparticle formulation of melittin reduced melittin cytotoxicity fivefold and prevented melittin toxicity at concentrations previously shown to inhibit HIV infectivity. Melittin nanoparticles were toxic to vaginal epithelium at equivalent melittin concentrations ≥20 µM (p<0.001) and were toxic to sperm at equivalent melittin concentrations ≥40 µM (p<0.001). Sperm cytotoxicity was enhanced by targeting of the nanoparticles to the sperm surface antigen sperm adhesion molecule 1. While further testing is needed to determine the extent of cytotoxicity in a more physiologically relevant model system, these results suggest that melittin-containing nanoparticles could form the basis of a virucide that is not toxic to sperm and vaginal epithelium. This virucide would be beneficial for HIV serodiscordant couples seeking to achieve natural pregnancy.

Efficacy of Tenofovir 1% Vaginal Gel in Reducing the Risk of HIV-1 and HSV-2 Infection

Human Immunodeficiency Virus (HIV) is a retrovirus that can result in rare opportunistic infections occurring in humans. The onset of these infections is known as Acquired Immune Deficiency Syndrome (AIDS). Sexual transmission is responsible for the majority of infections 1, resulting in transmission of HIV due to infected semen or vaginal and cervical secretions containing infected lymphocytes. HIV microbicides are formulations of chemical or biological agents that can be applied to the vagina or rectum with the intention of reducing the acquisition of HIV. Tenofovir is an NRTI that is phosphorylated by adenylate kinase to tenofovir diphosphate, which in turn competes with deoxyadeosine 5’-triphosphate for incorporation into newly synthesized HIV DNA. Once incorporated, tenofovir diphosphate results in chain termination, thus inhibiting viral replication. Tenofovir has been formulated into a range of vaginal formulations, such as rings, tablets gels and films. It has been shown to safe and effective in numerous animal models, while demonstrating safety and acceptability in numerous human trials. The most encouraging results came from the CAPRISA 004 clinical trial which demonstrated that a 1% Tenofovir vaginal gel reduced HIV infection by approximately 39%.

Development of a vaginal delivery film containing EFdA, a novel anti-HIV nucleoside reverse transcriptase inhibitor

The aim of this work was to develop a fast-dissolving film formulation containing EFdA for potential use as a topical vaginal microbicide for prevention of HIV sexual transmission. Solid state compatibility approaches were used to screen commonly used polymers for formulation development. Factorial design and desirability function were used to investigate the effect of two variables, the ratio of the polymers and the concentration of selected plasticizer on four mechanical responses including tensile strength, elongation at break, toughness and elastic modulus for optimization of the film formulation. Assessments of EFdA-loaded films included physicochemical characteristics, in vitro cytotoxicity, epithelia integrity, ex vivo permeability and bioactivity test. The optimal placebo film was composed of PVA, HPMC E5 and propylene glycol (7:3:3, w/w), and its mechanical characteristics were comparable to those of VCF(®) film (a commercial vaginal film product). Permeability studies using human ectocervical explants showed that there was no significant difference in cumulative permeated amount of EFdA between EFdA film and free EFdA. The results of in vitro cytotoxicity and bioactivity testing showed that 50% cytotoxic concentration (CC50) was several orders of magnitude higher than 50% effective concentration (EC50) of EFdA. Furthermore, epithelial integrity study showed that EFdA-loaded film had a much lower toxicity to HEC-1A cell monolayers as compared to VCF(®). Therefore, EFdA-loaded vaginal film may be considered as a promising vaginal microbicide for HIV prevention.

Multicompartmental pharmacokinetic model of tenofovir delivery by a vaginal gel

Background

Trials of a vaginal Tenofovir gel for pre-exposure prophylaxis (PrEP) for HIV have given conflicting results. Knowledge of concentrations of Tenofovir and its active form Tenofovir diphosphate, at putative sites of anti-HIV functioning, is central to understanding trial outcomes and design of products and dosage regimens. Topical Tenofovir delivery to the vaginal environment is complex, multivariate and non-linear; determinants relate to drug, vehicle, dosage regimen, and environment. Experimental PK methods cannot yield mechanistic understanding of this process, and have uncontrolled variability in drug sampling. Mechanistic modeling of the process could help delineate its determinants, and be a tool in design and interpretation of products and trials.

Methods and Findings

We created a four-compartment mass transport model for Tenofovir delivery by a gel: gel, epithelium, stroma, blood. Transport was diffusion-driven in vaginal compartments; blood concentration was time-varying but homogeneous. Parameters for the model derived from in vitro and in vivo PK data, to which model predictions gave good agreement. Steep concentration gradients occurred in stroma ≤8 hours after gel release. Increasing epithelial thickness delayed initial TFV delivery to stroma and its decline: t_max increased but AUC at 24 hours was not significantly altered. At 24 and 48 hours, stromal concentrations were 6.3% and 0.2% of C_max. Concentrations in simulated biopsies overestimated stromal concentrations, as much as ∼5X, depending upon time of sampling, biopsy thickness and epithelial thickness.

Conclusions

There was reasonably good agreement of model predictions with clinical PK data. Conversion of TFV to TFV-DP was not included, but PK data suggest a linear relationship between them. Thus contrasts predicted by this model can inform design of gels and dosage regimens in clinical trials, and interpretation of PK data. This mass transport based approach can be extended to TFV conversion to TFV-DP, and to other drugs and dosage forms.

Mitochondrial dysfunction is the focus of quaternary ammonium surfactant toxicity to mammalian epithelial cells

Surfactants have long been known to have microbicidal action and have been extensively used as antiseptics and disinfectants for a variety of general hygiene and clinical purposes. Among surfactants, quaternary ammonium compounds (QAC) are known to be the most useful antiseptics and disinfectants. However, our previous toxicological studies showed that QAC are also the most toxic surfactants for mammalian cells. An understanding of the mechanisms that underlie QAC toxicity is a crucial first step in their rational use and in the design and development of more effective and safer molecules. We show that QAC-induced toxicity is mediated primarily through mitochondrial dysfunction in mammalian columnar epithelial cell cultures in vitro. Toxic effects begin at sublethal concentrations and are characterized by mitochondrial fragmentation accompanied by decreased cellular energy charge. At very low concentrations, several QAC act on mitochondrial bioenergetics through a common mechanism of action, primarily by inhibiting mitochondrial respiration initiated at complex I and, to a lesser extent, by slowing down coupled ADP phosphorylation. The result is a reduction of cellular energy charge which, when reduced below 50% of its original value, induces apoptosis. The lethal effects are shown to be primarily a result of this process. At higher doses (closer to the critical micellar concentration), QAC induce the complete breakdown of cellular energy charge and necrotic cell death.

User preferences in a carrageenan-based vaginal drug delivery system

Topical microbicides are a promising solution to address the global threat of HIV and other sexually transmitted infections. To be successful, a microbicide not only needs to be biologically functional but also highly acceptable to users. User acceptability of microbicides can be incorporated early in the product formulation and design process. Previous qualitative research revealed women had strong preferences regarding product shape, while preferences related to size and firmness were less clear. Here, we explored the effect of size and firmness on the acceptability of semisolid ovoid microbicide prototypes intended for vaginal use. Sexually active women (n = 74) were randomized to one of two conditions: with and without applicator. Nine different prototypes were evaluated; they were formulated to low, medium and high firmness using mixtures of kappa and iota carrageenan and potassium chloride. Three sizes were produced at each firmness level. Women manipulated all nine prototypes, rating them for perceived effectiveness, imagined ease-of-insertion and willingness-to-try on visual analog scales. The influence of size and firmness on these three outcome measures were assessed using ANOVA and response surface models. Results indicated size and firmness both influenced the outcome measures, but firmess was more influential than size. Also, the specific effects of size and firmness depended strongly on presence or absence of an applicator. Generally, women in the without applicator condition wanted a larger, firmer product. Collectively, these data suggest efforts to rationally design of microbicides for enhanced user acceptability must consider factors like size and firmness. Also, the decision to include or forego an applicator should be addressed early in the design process, as it strongly influences other design decisions.

Shape of vaginal suppositories affects willingness-to-try and preference

HIV and other sexually transmitted infections (STIs) are a global threat to public health that may be countered, in part, by microbicides. A successful microbicide must be both biologically efficacious and highly acceptable to users. Sensory attributes have a direct influence on product acceptability. We created a series of vaginal suppositories appropriate for use as microbicides to investigate the influence of shape on women's willingness-to-try. The influence of perceived size and firmness on acceptability was also assessed. Sexually-active women (n=99) were invited to participate in an evaluation of vaginal suppositories in 5 different shapes including: Bullet, Long Oval, Round Oval, Teardrop and Tampon. The volume (3mL) and formulation for these five prototypes were identical. After manipulating prototypes ex vivo (in their hands), participants rated their willingness-to-try on a 100-point visual analog scale. The appropriateness of size and firmness were evaluated using 5-point just-about-right (JAR) scales. Each participant evaluated all five prototypes individually. Samples were presented in a counterbalanced monadic sequence using a Williams design. Mean willingness-to-try varied by shape, with Bullet and Long Oval receiving significantly higher scores. This was consistent with JAR data for size, as 70% and 65% of women indicated these shapes were 'just-about-right', respectively. In contrast, a minority of women endorsed the other 3 shapes as having a size that was 'just-about-right'. The proportion of women who felt the firmness was 'just-about-right' was uniformly high, irrespective of shape, suggesting prior attempts to optimize the formula were successful. Perceptions of size and firmness were influenced by the physical length and width of the prototypes, in spite of having constant volume. Women showed high willingness-to-try when asked to assume they were at risk. These results are relevant for behavioral and formulation scientists working on microbicides, to better understand the influence of sensory attributes on acceptability, as acceptability and compliance ultimately impact effectiveness.

In vivo optical imaging of human vaginal gel thickness distributions with a probe-based, dual-modality instrument

ABSTRACT. We used a probe-based dual-modality optical imaging instrument to measure in vivo coating thickness distributions of a gel distributed along the vaginal lumen, in a clinical study. The gel was a surrogate for one delivering an anti-HIV topical microbicide. Imaging data from Fourier-domain multiplexed low-coherence interferometry (mLCI) and fluorimetric measurements were compared to assess the feasibility and accuracy of mLCI in measuring in vivo gel coating thickness distributions. In each study session, 3.5 mL of Replens gel was inserted to the vaginal fornix while the participant was supine. The participant either: 1. remained supine (10 or 60 min); or 2. sat up (1 min), stood up (1 min), sat down (1 min) and returned to the supine position; net elapsed time was 10 or 60 min after which the gel distribution was imaged. Local coating thickness distributions were qualitatively and quantitatively similar. Here mLCI did not accurately measure thicker gel coatings (&gt;0.8  mm), a limitation not seen with fluorimetry. However, mLCI is capable of measuring in vivo microbicide gel distributions with resolution on the order of 10 μm, without the need for exogenous contrast agents, and can accurately capture relevant summary coating measures in good agreement with fluorimetry.

Understanding factors that modulate HIV infection at the female genital tract mucosae for the rationale design of microbicides

Women are now becoming the pivot of the epidemiological spread of HIV infection worldwide, especially in developing countries. Therefore, research to develop an efficient microbicide is now a priority for the prevention of HIV-1 acquisition in exposed women. However, recent disappointing failures in microbicide clinical trials revealed major gaps in basic and applied knowledge that hinder the development of effective microbicide formulations. Indeed, the inhibitory power of microbicide molecules may be affected by several physiological and immunological factors present in male and female genital tracts. Furthermore, mucosal crossing of HIV-1 to increase the ability to reach the submucosal target cells (macrophages, lymphocytes, and dendritic cells) may be modulated by supraepithelial factors such as seminal complement components (opsonized HIV-1), by epithelial factors released in the submucosal microenvironment such as antimicrobial soluble factors, cytokines, and chemokines, and by potent intraepithelial and submucosal innate immunity. The design of vaginal microbicide formulations should take into account an understanding of the intimate mechanisms involved in the crossing of HIV through the female genital mucosae, in the context of a mixture of both male and female genital fluids.

Topical microbicides for prevention of sexually transmitted infections

BACKGROUND

Two decades of research on topical microbicides for prevention of sexually transmitted infections (STIs) have had limited success. However, new microbicide randomised controlled trial (RCT) data have recently been published; but these have not yet been the subject of a systematic review.

OBJECTIVES

To determine the effects of topical microbicides for prevention of the acquisition of STIs, including human immunodeficiency virus (HIV) infection, by women from men and by men who have sex with men (MSM).

SEARCH METHODS

In July 2011 we searched the Cochrane Central Register of Controlled Trials (CENTRAL), PubMed, EMBASE, Web of Science, NLM Gateway, CLIB, AIDS Education Global Information System, ClinicalTrials.gov and the World Health Organization (WHO) International Clinical Trials Registry Platform; handsearched reference lists of relevant articles and contacted relevant organisations and experts.

SELECTION CRITERIA

RCTs of topical microbicides (except Nonoxynol-9) in sexually active, HIV-negative women or MSM. We excluded Nonoxynol-9 because previous systematic reviews showed that it does not have a significant effect on HIV or STIs.

DATA COLLECTION AND ANALYSIS

We assessed study eligibility, extracted data and assessed risk of bias in duplicate; resolving differences by discussion and consensus. We then conducted fixed-effect meta-analysis, stratified by type of microbicide.

MAIN RESULTS

We found that by the end of 2011, nine microbicide RCTs had either been conducted to term (one BufferGel and 0.5% PRO 2000, one Carraguard and one tenofovir trial) or stopped early due to safety concerns (two cellulose sulphate trials) or insufficient rate of HIV infection and low likelihood of showing a protective effect (one 2% PRO 2000, one tenofovir and two SAVVY trials). The nine RCTs enrolled 31,941 sexually active women between 2004 and 2011; in Benin, Ghana, Malawi, Nigeria, South Africa, Tanzania, Uganda, Zambia, Zimbabwe, India, and the US. A small proof-of-concept RCT found that tenofovir (a nucleotide reverse transcriptase inhibitor) reduced the risk of HIV acquisition (one trial, 889 women; risk ratio (RR) 0.63; 95% CI 0.43 to 0.93). Effectiveness data are not yet available from the second tenofovir RCT that enrolled 5000 women and was stopped early due to low likelihood of showing a protective effect. We found no evidence of an effect on HIV acquisition for cellulose sulphate (2 trials, n = 3069; RR 1.20; 95% CI 0.74 to 1.95), SAVVY (two trials, n = 4295; RR 1.38; 95% CI 0.79 to 2.41), Carraguard (one trial, n = 6202; RR 0.89; 95% CI 0.71 to 1.11), PRO 2000 (two trials, n = 12,486; RR 0.93, 95% CI 0.77 to 1.14) and BufferGel (one trial, n = 1546; RR 1.05; 95% CI 0.73 to 1.52). Tenofovir reduced the incidence of herpes simplex virus type 2 (HSV-2) infection (one trial, 426 women; RR 0.55; 95% CI 0.37 to 0.83) and cellulose sulphate reduced the risk of chlamydia infection (two trials, n = 3069; RR 0.70, 95% CI 0.49 to 0.99). However, there was no evidence of an effect of any microbicide on the acquisition of gonorrhoea, syphilis, condyloma acuminatum, trichomoniasis, or human papillomavirus (HPV) infection. A substudy of the Carraguard trial found the prevalence of high-risk HPV infection (HR-HPV) to be 23.5% in women on Carraguard and 23.0% on placebo (n = 1718; RR 1.02; 95% CI 0.86 to 1.21). After controlling for HR-HPV risk factors, the authors found that compliant Carraguard users were 0.62 (95% CI 0.41 to 0.94) times as likely to be HR-HPV positive as compliant placebo users. Overall, there was no significant difference in the incidence of adverse events between microbicide and placebo groups.

AUTHORS' CONCLUSIONS

Limited evidence suggests that vaginal tenofovir microbicides may reduce the risk of acquisition of HIV and HSV-2 infections in women; but other types of topical microbicides have not shown evidence of an effect on HIV or STI acquisition. Therefore, there is not enough evidence to recommend topical microbicides for HIV or STI prevention at present. Further studies are needed to confirm the beneficial effects of tenofovir microbicide gel in vaginal sex. In addition, further research should continue on the development and testing of new microbicides. If the effectiveness of the tenofovir and/or other microbicides is confirmed in further studies, there will need to be a clear pathway to rapid regulatory approval. Successful launch of the effective gel would depend on having in place appropriate mechanisms for distribution to the women who need it, along with a strategy for ensuring that they use it correctly.

Sustained release of the CCR5 inhibitors CMPD167 and maraviroc from vaginal rings in rhesus macaques

Antiretroviral entry inhibitors are now being considered as vaginally administered microbicide candidates for the prevention of the sexual transmission of human immunodeficiency virus. Previous studies testing the entry inhibitors maraviroc and CMPD167 in aqueous gel formulations showed efficacy in the macaque challenge model, although protection was highly dependent on the time period between initial gel application and subsequent challenge. In this paper, we describe the sustained release of maraviroc and CMPD167 from matrix-type silicone elastomer vaginal rings both in vitro and in vivo. Both inhibitors were released continuously during 28 days from rings in vitro at rates of 100 to 2,500 μg/day. In 28-day pharmacokinetic studies in rhesus macaques, the compounds were measured in the vaginal fluid and vaginal tissue; steady-state fluid concentrations were ~10(6)-fold greater than the 50% inhibitory concentrations (IC(50)s) for simian human immunodeficiency virus 162P3 inhibition in macaque lymphocytes in vitro. Plasma concentrations for both compounds were very low. The pretreatment of macaques with Depo-Provera (DP), which is commonly used in macaque challenge studies, was shown to significantly modify the biodistribution of the inhibitors but not the overall amount released. Vaginal fluid and tissue concentrations were significantly decreased while plasma levels increased with DP pretreatment. These observations have implications for designing macaque challenge experiments and also for ring performance during the human female menstrual cycle.

A hot-melt extruded intravaginal ring for the sustained delivery of the antiretroviral microbicide UC781

Microbicide intravaginal rings (IVRs) are a promising woman-controlled strategy for preventing sexual transmission of human immunodeficiency virus (HIV). An IVR was prepared and developed from polyether urethane (PU) elastomers for the sustained delivery of UC781, a highly potent nonnucleoside reverse transcriptase inhibitor of HIV-1. PU IVRs containing UC781 were fabricated using a hot-melt extrusion process. In vitro release studies of UC781 demonstrated that UC781 release profiles are loading dependent and resemble matrix-type, diffusion-limited kinetics. The in vitro release methods employed over predicted the in vivo release rates of UC781 in rabbits. Accelerated stability studies showed good chemical stability of UC781 in prototype formulations, but surface crystallization of UC781 was observed following long-term storage at higher UC781 loadings, unless formulated with a polyvinylpyrrolidone/glycerol surface coating. Mechanical stability testing of prototype rings showed moderate stiffening upon storage. The PU and UC781 had minimal to no impact on viability, tissue integrity, barrier function, or cytokine expression in the tissue irritation model, and UC781 was shown to be delivered to and permeate through this tissue construct in vitro. Overall, UC781 was formulated in a stable PU IVR and provided controlled release of UC781 both in vitro and in vivo.

The consequences of yield stress on deployment of a non-Newtonian anti-HIV microbicide gel

A recent study in South Africa has confirmed, for the first time, that a vaginal gel formulation of the antiretroviral drug Tenofovir, when applied topically, significantly inhibits sexual HIV transmission to women [10]. However the gel for this drug, and anti-HIV microbicide gels in general, have not been designed using full understanding of how gel spreading and retention in the vagina govern successful drug delivery. Elastohydrodynamic lubrication theory can be applied to model such spreading of microbicide gels, which are inherently non-Newtonian [13,15]. A yield stress is emerging as one of the important properties of microbicide gel vehicle deployment, as this may improve retention within the vaginal canal. On the other hand, a yield stress may decrease the initial extent of the coating flow. Here, we first explain a certain yield stress paradox observed generally in many lubrication flows. Four conditions are determined, via scaling analysis, which mitigate the inconsistency in the use of lubrication theory to analyze the specific problem of elastic wall squeezing flow of yield stress fluid. Parameters characterizing these conditions are obtained experimentally for a test gel. Using them, it is shown that the lubrication approximation may be applied to the elastic wall-squeezing problem for this gel.

The effects of inhomogeneous boundary dilution on the coating flow of an anti-HIV microbicide vehicle

A recent study in South Africa has confirmed, for the first time, that a vaginal gel formulation of the antiretroviral drug Tenofovir, when topically applied, significantly inhibits sexual HIV transmission to women [Karim et al., Science 329, 1168 (2010)]. However, the gel for this drug and anti-HIV microbicide gels in general have not been designed using an understanding of how gel spreading and retention in the vagina govern successful drug delivery. Elastohydrodynamic lubrication theory can be applied to model spreading of microbicide gels [Szeri et al., Phys. Fluids 20, 083101 (2008)]. This should incorporate the full rheological behavior of a gel, including how rheological properties change due to contact with, and dilution by, ambient vaginal fluids. Here, we extend our initial analysis, incorporating the effects of gel dilution due to contact with vaginal fluid produced at the gel-tissue interface. Our original model is supplemented with a convective-diffusive transport equation to characterize water transport into the gel and, thus, local gel dilution. The problem is solved using a multi-step scheme in a moving domain. The association between local dilution of gel and rheological properties is obtained experimentally, delineating the way constitutive parameters of a shear-thinning gel are modified by dilution. Results show that dilution accelerates the coating flow by creating a slippery region near the vaginal wall akin to a dilution boundary layer, especially if the boundary flux exceeds a certain value. On the other hand, if the diffusion coefficient of boundary fluid is increased, the slippery region diminishes in extent and the overall rate of gel spreading decreases.

Non-aqueous silicone elastomer gels as a vaginal microbicide delivery system for the HIV-1 entry inhibitor maraviroc

Aqueous semi-solid polymeric gels, such as those based on hydroxyethylcellulose (HEC) and polyacrylic acid (e.g. Carbopol®), have a long history of use in vaginal drug delivery. However, despite their ubiquity, they often provide sub-optimal clinical performance, due to poor mucosal retention and limited solubility for poorly water-soluble actives. These issues are particularly pertinent for vaginal HIV microbicides, since many lead candidates are poorly water-soluble and where a major goal is the development of a coitally independent, once daily gel product. In this study, we report the use of a non-aqueous silicone elastomer gel for vaginal delivery of the HIV-1 entry inhibitor maraviroc. In vitro rheological, syringeability and retention studies demonstrated enhanced performance for silicone gels compared with a conventional aqueous HEC gel, while testing of the gels in the slug model confirmed a lack of mucosal irritancy. Pharmacokinetic studies following single dose vaginal administration of a maraviroc silicone gel in rhesus macaques showed higher and sustained MVC levels in vaginal fluid, vaginal tissue and plasma compared with a HEC gel containing the same maraviroc loading. The results demonstrate that non-aqueous silicone gels have potential as a formulation platform for coitally independent vaginal HIV microbicides.

Couples' acceptability of the SILCS diaphragm for microbicide delivery

BACKGROUND

Disposable plastic applicators used in microbicide gel studies are expensive and have a negative environmental impact. The SILCS diaphragm is a barrier contraceptive that could offer a reusable delivery system.

STUDY DESIGN

Thirty-six couples in this randomized, cross-over study evaluated single- and double-sided gel delivery from a SILCS diaphragm compared with gel from an applicator. Couples used each gel scenario during two acts of intercourse and completed acceptability questionnaires after each.

RESULTS

All three scenarios received favorable ratings for ease of application, acceptability and perceived effectiveness. Both female and male participants tended to rate the gel applicator significantly more favorably than either SILCS gel delivery scenarios for all attributes except messiness/leakage and effectiveness. Additionally, about 60% of female participants and about half of male participants preferred the gel applicator to either of the gel delivery systems using SILCS. The preference for the SILCS scenario for pregnancy protection was statistically significant for both sexes. Male participants were also significantly more likely to prefer the SILCS single-sided delivery system to the gel applicator for protection from sexually transmitted infection.

CONCLUSIONS

In this study population, participants found the gel applicator to be more acceptable than either single- or double-sided gel delivery from a SILCS diaphragm. Further research of the SILCS as a microbicide delivery system should be implemented to assess its acceptability among study populations that reflect diverse potential user groups such as women and men from both low and high HIV prevalence settings including HIV-positive populations and with and without experience using female barrier methods.

Injectable PAMAM dendrimer-PEG hydrogels for the treatment of genital infections: formulation and in vitro and in vivo evaluation

Local intravaginal drug therapy is preferred for treatment of ascending genital infections during pregnancy. In the present study, an in situ forming biodegradable hydrogel for sustained release of amoxicillin in the cervicovaginal region is described. A generation 4 poly(amidoamine) [G4-(NH(2))(64)] dendrimer with peripheral thiopyridyl terminations is cross-linked with 8-arm polyethylene glycol (PEG) bearing thiol terminations. The hydrogels were formulated and tested in vivo in a pregnant guinea pig model for volume, retention times, biodegradation, tolerability and transport across fetal membrane. The physicochemical characterization of the hydrogels was carried out using differential calorimetry, SEM, and confocal imaging. The hydrogels offer antibacterial activity arising from sustained release of amoxicillin from gels. The in vivo studies in guinea pig showed that 100-200 μL of gel sufficiently covered the cervicovaginal region with a residence time of at least 72 h and gel was primarily retained in the maternal tissues without crossing the fetal membranes into the fetus. The dendrimer gels were stable up to 72 h, and the in vivo biodegradation of gel occurred after 72 h; this correlated well with the in vitro degradation pattern. The pH of the vagina was not altered upon application of the gel, and none of the animals aborted up to 72 h after application of gel. The histological evaluation of the cervical tissues showed absence of edema in the epithelial cell layer, no sloughing of the epithelial or superficial mucous layer, and absence of necrosis and infiltration of inflammatory cells in the submucosal layers, confirming that tissues were tolerant to the gel. The immunohistofluorescence images showed the localization of the gel components on the superficial mucified epithelial layer. The cross-linking density and swelling of hydrogels was impacted by the polymer content, and the 10% hydrogels exhibited the highest cross-link density. The in vitro drug release studies carried out using Franz diffusion cells showed that amoxicillin release from 6 and 10% gels was sustained for 240 h as compared to 3% gels. As the polymer concentration increased to 10%, the release pattern from gels approached diffusion controlled mechanism with diffusional exponent n = 0.49. In conclusion, the biodegradable in situ forming hydrogels of the present study offer a therapeutic option to provide sustained localized delivery of amoxicillin intracervically to the pregnant woman for the treatment of ascending genital infections.

Enzymatic triggered release of an HIV-1 entry inhibitor from prostate specific antigen degradable microparticles

This paper describes the design, construction and characterization of the first anti-HIV drug delivery system that is triggered to release its contents in the presence of human semen. Microgel particles were synthesized with a crosslinker containing a peptide substrate for the seminal serine protease prostate specific antigen (PSA) and were loaded with the HIV-1 entry inhibitor sodium poly(styrene-4-sulfonate) (pSS). The particles were composed of N-2-hydroxyproplymethacrylamide and bis-methacrylamide functionalized peptides based on the PSA substrates GISSFYSSK and GISSQYSSK. Exposure to human seminal plasma (HSP) degraded the microgel network and triggered the release of the entrapped antiviral polymer. Particles with the crosslinker composed of the substrate GISSFYSSK showed 17 times faster degradation in seminal plasma than that of the crosslinker composed of GISSQYSSK. The microgel particles containing 1 mol% GISSFYSSK peptide crosslinker showed complete degradation in 30 h in the presence of HSP at 37°C and pSS released from the microgels within 30 min reached a concentration of 10 μg/mL, equivalent to the published IC(90) for pSS. The released pSS inactivated HIV-1 in the presence of HSP. The solid phase synthesis of the crosslinkers, preparation of the particles by inverse microemulsion polymerization, HSP-triggered release of pSS and inactivation of HIV-1 studies are described.

Rational design of HIV vaccines and microbicides: report of the EUROPRISE network annual conference 2010

Novel, exciting intervention strategies to prevent infection with HIV have been tested in the past year, and the field is rapidly evolving. EUROPRISE is a network of excellence sponsored by the European Commission and concerned with a wide range of activities including integrated developmental research on HIV vaccines and microbicides from discovery to early clinical trials. A central and timely theme of the network is the development of the unique concept of co-usage of vaccines and microbicides. This review, prepared by the PhD students of the network captures much of the research ongoing between the partners. The network is in its 5th year and involves over 50 institutions from 13 European countries together with 3 industrial partners; GSK, Novartis and Sanofi-Pasteur. EUROPRISE is involved in 31 separate world-wide trials of Vaccines and Microbicides including 6 in African countries (Tanzania, Mozambique, South Africa, Kenya, Malawi, Rwanda), and is directly supporting clinical trials including MABGEL, a gp140-hsp70 conjugate trial and HIVIS, vaccine trials in Europe and Africa.

Viral surface glycoproteins, gp120 and gp41, as potential drug targets against HIV-1: brief overview one quarter of a century past the approval of zidovudine, the first anti-retroviral drug

The first anti-HIV drug, zidovudine (AZT), was approved by the FDA a quarter of a century ago, in 1985. Currently, anti-HIV drug-combination therapies only target HIV-1 protease and reverse transcriptase. Unfortunately, most of these molecules present numerous shortcomings such as viral resistances and adverse effects. In addition, these drugs are involved in later stages of infection. Thus, it is necessary to develop new drugs that are able to block the first steps of viral life cycle. Entry of HIV-1 is mediated by its two envelope glycoproteins: gp120 and gp41. Upon gp120 binding to cellular receptors, gp41 undergoes a series of conformational changes from a non-fusogenic to a fusogenic conformation. The fusogenic core of gp41 is a trimer-of-hairpins structure in which three C-terminal helices pack against a central trimeric-coiled coil formed by three N-terminal helices. The formation of this fusogenic structure brings the viral and cellular membranes close together, a necessary condition for membrane fusion to occur. As gp120 and gp41 are attractive targets, the development of entry inhibitors represents an important avenue of anti-HIV drug therapy. The present review will focus on some general considerations about HIV, the main characteristics of gp120, gp41 and their inhibitors, with special emphasis on the advances of computational approaches employed in the development of bioactive compounds against HIV-1 entry process.

Quantitative perceptual differences among over-the-counter vaginal products using a standardized methodology: implications for microbicide development

BACKGROUND

Increasing prevalence of HIV infection among women worldwide has motivated the development of female-initiated prevention methods, including gel-based microbicides. User acceptability is vital for microbicide success; however, varying cultural vaginal practices indicate multiple formulations must be developed to appeal to different populations. Perceptual attributes of microbicides have been identified as primary drivers of acceptability; however, previous studies do not allow for direct comparison of these qualities between multiple formulations.

STUDY DESIGN

Six vaginal products were analyzed ex vivo using descriptive analysis. Perceptual attributes of samples were identified by trained participants (n=10) and rated quantitatively using scales based on a panel-developed lexicon. Data were analyzed using two-way ANOVAs for each attribute; product differences were assessed via Tukey's honestly significant difference test.

RESULTS

Significant differences were found between products for multiple attributes. Patterns were also seen for attributes across intended product usage (i.e., contraceptive, moisturizer or lubricant). For example, Options© Gynol II® (Caldwell Consumer Health, LLC) was significantly stickier and grainier than other products.

CONCLUSIONS

Descriptive analysis, a quantitative approach that is based on consensus lexicon usage among participants, successfully quantified perceptual differences among vaginal products. Since perceptual attributes of products can be directly compared quantitatively, this study represents a novel approach that could be used to inform rational design of microbicides.