An AIEgen-based 3D covalent organic framework for white light-emitting diodes

Confining metal nanoparticles and nanoclusters in covalent organic frameworks for biosensing and biomedicine

Metal nanoscale particles, primarily including metal nanoparticles (MNPs) and nanoclusters (MNCs), have garnered substantial interests owing to their unique electronic configurations and distinct physicochemical properties. However, practical applications are frequently constrained by their limited stability and aggregation tendency. Covalent organic frameworks (COFs), featuring highly ordered periodic architectures, have emerged as ideal porous matrices for hosting metal nanoparticles. The resulting metal-embedded COFs synthesized through adsorption methods (M/COFs) or in-situ reduction (M@COFs) not only mitigate nanoparticle aggregation and enhance stability but also demonstrate synergistic effects that generate enhanced or novel functionalities, significantly broadening their application potential. This review firstly examines adsorption-based synthesis strategies for M/COFs through physical and chemical approaches. Subsequently, we analyze in-situ reduction methods for M@COFs, categorizing them by reduction pathways: deposition, impregnation-pyrolysis, and "one-step" synthesis. Special attention is given to an emerging pore wall engineering strategy within in-situ reduction approach. The biosensing and biomedical applications of metal-embedded COFs are systematically examined, highlighting their comparative advantages over conventional nanomaterials in sensing and antimicrobial applications. While metal-embedded COFs remain in their developmental infancy and face considerable challenges, the controlled synthesis of multifunctional variants promises transformative potential across biomedical domains.

Modulation of Aggregation of Covalent Organic Framework Nanosheets with Aggregation-Induced Emission Activity for Ultrasensitive No-Wash Fluorescent Immunosensor

No-wash fluorescence immunosensors are favored because of their simple operation and precise results. However, cleverly designing two fluorescent materials so that their interaction through antigen-antibody specific binding to produce significant fluorescence changes poses a considerable challenge to the design of immunosensors. Herein, covalent organic framework nanosheets (CONs) with aggregation-induced emission (AIE) luminogens (AIEgens) were synthesized to regulate the aggregation of AIEgens through antigen-antibody binding for an ultrasensitive no-wash fluorescence immunosensor. The two-dimensional (2D) CONTFBE-PDAN exhibited excellent AIE activity. A Pt nanoparticle (PtNP)-modified AIE-CONTFBE-PDAN was designed as a signal amplifier, in which the PtNPs were used to bind antibody (Ab) via Pt-N/Pt-S bonds. After the sandwich immunocomplexes were formed by the antigen-antibody interaction, a more compact stacking assembly maximizes the restriction of intramolecular rotation, restriction of intramolecular vibration, restriction of intramolecular motion, and conformational planarization. This optimizes the spatial alignment required for efficient AIE, thereby yielding a strong fluorescence response. Using carcinoembryonic antigen 19-9 (CA 19-9) as a model tumor marker, a no-wash sandwich-type fluorescent immunosensor was constructed. Since a crystalline 2D AIE-CONTFBE-PDAN contains lots of AIEgens, the sensitivity of the fluorescence immunosensor is expected to improve greatly. The no-wash sandwich-type immunosensor showed good performance for CA 19-9 with a linear range of 0.01 mU/mL to 10 U/mL and a detection limit of 3.3 μU/mL (S/N = 3), which was satisfactory in real samples. To the best of our knowledge, this is the first time that AIE-CONs have been used for fluorescence immunosensing, which provides a new perspective for the trace detection of tumor markers.

Retrospective Review on Reticular Materials: Facts and Figures Over the Last 30 Years

The field of reticular materials, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), is expanding continuously - be it in terms of novel structures, advanced characterization techniques, or record-breaking physical properties for applications. This timeline review reflects on the progress over the past 30 years, complemented by input from the community of active researchers. Owing to a global, crowdsourced survey of 228 researchers that is conducted through an online questionnaire, recent insights into the demographics of the field are given. Besides revealing how it works, publish, and interact, the review highlights both academic and industrial milestones. The contemporary trends are described, both at the level of material development and their suitability for a range of applications. To pave the way for newcomers to the field, some remaining challenges and steps to overcome them are discussed. The findings from this contemplative review aim to shape the future course of research in this domain.

Recent Progress in Developing Conjugated Polymer-Microorganism Biohybrids for Semi-Artificial Photosynthetic Energy Conversion

Semi-artificial photosynthesis, which merges the precision of synthetic materials with the catalytic versatility of biological systems, offers a transformative route to solar-driven chemical fuel production and sustainable energy conversion. Conjugated polymers, with their high molar absorption coefficients, broad spectral responsiveness, and tunable semiconducting properties, have emerged as key components in advancing semi-artificial photosynthetic biohybrids. Their capacity for targeted surface modification not only facilitates enhanced interfacing with biological catalysts but also optimizes charge transfer across the bio-synthetic interface. This review traces the evolution of conjugated polymer-based biohybrids, highlighting recent advancements that extend microbial light harvesting, support cellular resilience against environmental stress, and optimize charge transfer via precise structure-activity relationships. Furthermore, this review explores the challenges and opportunities in this field, offering a roadmap for the design of durable and high-performance biohybrid systems. Through the integration of conjugated polymers and microorganisms, this review outlines a strategic approach for solar-driven chemical energy conversion, paving the way for eco-friendly energy solutions.

Semiconducting Covalent Organic Frameworks

Semiconductors form the foundational bedrock of modern electronics and numerous cutting-edge technologies. Particularly, semiconductors crafted from organic building blocks hold immense promise as next-generation pioneers, thanks to their vast array of chemical structures, customizable frontier orbital energy levels and bandgap structures, and easily adjustable π electronic properties. Over the past 50 years, advancements in chemistry and materials science have facilitated extensive investigations into small organic π compounds, oligomers, and polymers, resulting in a rich library of organic semiconductors. However, a longstanding challenge persists: how to organize π building units or chains into well-defined π structures, which are crucial for the performance of organic semiconductors. Consequently, the pursuit of methodologies capable of synthesizing and/or fabricating organic semiconductors with ordered structures has emerged as a frontier in organic and polymeric semiconductor research. In this context, covalent organic frameworks (COFs) stand out as unique platforms allowing for the covalent integration of organic π units into periodically ordered π structures, thus facilitating the development of semiconductors with extended yet precisely defined π architectures. Since their initial report in 2008, significant strides have been made in exploring various chemistries to develop semiconducting COFs, resulting in a rich library of structures, properties, functions, and applications. This review provides a comprehensive yet focused exploration of the general structural features of semiconducting COFs, outlining the basic principles of structural design, illustrating the linkage chemistry and synthetic strategies based on typical one-pot polymerization reactions to demonstrate the growth of bulk materials, nanosheets, films, and membranes. By elucidating the interactions between COFs and various entities such as photons, phonons, electrons, holes, ions, molecules, and spins, this review categorizes semiconducting COFs into nine distinct sections: semiconductors, photoconductors, light emitters, sensors, photocatalysts, photothermal conversion materials, electrocatalysts, energy storage electrodes, and radical spin materials, focusing on disclosing structure-originated properties and functions. Furthermore, this review scrutinizes structure-function correlations and highlights the unique features, breakthroughs, and challenges associated with semiconducting COFs. Furnished with foundational knowledges and state-of-the-art insights, this review predicts the fundamental issues to be addressed and outlines future directions for semiconducting COFs, offering a comprehensive overview of this rapidly evolving and remarkable field.

Covalent organic framework nanomaterials: Syntheses, architectures, and applications

Covalent Organic Frameworks (COFs) are characterized by high thermochemical stability, low backbone density, well-controlled physical and chemical properties, large specific surface volume and porosity, permanently open pore structure, and various synthesis strategies. These remarkable attributes confer COFs with significant potential for a myriad of applications ranging from catalysis technology, gas separation and storage, optoelectronic materials, environmental and energy sciences, and biomedical development. There are many synthetic design methods for COF materials, and dynamic covalent chemistry is the scientific basis of COF materials-oriented design, which gives the error correction ability of the covalent assembly process, and is the key to obtaining crystallization and stability at the same time. However, "crystallinity" and "stability" in the synthesis and preparation of COF materials are often like "You can't have your cake and eat it, too": on the one hand, the reversible covalent bonds used in the synthesis of highly crystalline COF framework are easy to decompose under extreme conditions, which greatly limits its application scenarios; On the other hand, although highly stable COF materials can be prepared by using irreversible covalent bonds, it is usually poor crystalline and difficult to have high performance. In addition, the strict deoxygenation operation required for synthesizing COF materials also limits its macro preparation and large-scale application. Therefore, the synthesis strategy and efficient preparation of highly stable and crystalline COF materials are a major obstacle to the practical application of this field. This paper describes the four structures of COF materials, as well as their synthesis methods, electrical energy-storing electrocatalysis, and significant environmental protection applications. The future directions, prospects, and possible barriers to the development of these materials are envisioned in.

Interface preassembly oriented growth strategy towards flexible crystalline covalent organic framework films for OLEDs

The synthesis of flexible crystalline films for optoelectronic applications remains a significant chemical challenge due to the inherent contradiction between flexibility and crystallinity. The delicate balance between flexibility and crystallinity has long constituted a barrier to the development of high-performance optoelectronic materials. Herein, an interface preassembly oriented growth (IPOG) strategy has been explored to fabricate flexible crystalline covalent organic framework (COF) films with controllable thickness. By synergistically modulating hydrophilic and hydrophobic interactions along with interfacial confinement, a set of uniform and flexible crystalline COF films were successfully synthesized. This achievement unlocks the potential of COFs for device applications in organic light-emitting diodes, leading to unprecedented high-efficiency electroluminescence from COFs. This groundbreaking advancement not only lays the foundation for the progress of COF-based OLEDs but also signifies the advent of an era in the synthesis of flexible crystalline materials, wherein exceptional mechanical properties are seamlessly integrated with superior electronic performance, thus heralding a transformative impact on the landscape of flexible electronics.

Construction of Luminescent Three-Dimensional Covalent Organic Frameworks for Molecular Decoding of Wide Organic Compounds

Constructing highly conjugated three-dimensional covalent organic frameworks (3D COFs), particularly those with luminescent features, remains a significant challenge. In this work, we successfully synthesized a 3D COF, named 3D-Py-SP-COF, using a rigid and orthogonal spirobifluorene building block for the spatial 3D structure construction and planar pyrene as luminescent units. The incorporation of the pyrene and the unique rigid 3D network structure endow 3D-Py-SP-COF with fluorescent properties. The successful formation of this 3D COF was verified by FT-IR, solid-state 13C CP-MAS NMR. Structural simulations based on the experimental powder X-ray diffraction analysis revealed that 3D-Py-SP-COF adopted a two-fold interpenetrated pts topology. The highly conjugated porous framework and fluorescent nature allow precise detection and localization of more than two dozen volatile organic compounds (VOCs), including aromatics, alcohols, and other commonly encountered industrial VOCs.

A Dynamic Covalent Organic Framework with Entangled 2D Layers

Dynamic covalent organic frameworks (COFs) represent an emerging class of porous materials with an inherent structural flexibility. However, due to the challenges in their synthesis and structural characterization, research on dynamic COFs remains at an early stage and requires further exploration. Herein, we report the designed synthesis of a novel COF with entangled 2D layers that exhibits interesting dynamic behavior in response to organic vapor exposure. By employing the continuous rotation electron diffraction technique, we precisely resolved the crystal structures of the COF before and after vapor adsorption. Structural analysis revealed that the vapor-induced conformational changes, such as anthracene unit rotation, triggered layer adjustments and reduced entanglement angles, leading to significant pore structure alterations. This study not only introduces a new class of dynamic COFs but also provides a foundation for the rational design of entangled frameworks with structural flexibility for diverse applications.

Spatiotemporal Spectroscopy of Fast Excited-State Diffusion in 2D Covalent Organic Framework Thin Films

Covalent organic frameworks (COFs), crystalline and porous conjugated structures, are of great interest for sustainable energy applications. Organic building blocks in COFs with suitable electronic properties can feature strong optical absorption, whereas the extended crystalline network can establish a band structure enabling long-range coherent transport. This peculiar combination of both molecular and solid-state materials properties makes COFs an interesting platform to study and ultimately utilize photoexcited charge carrier diffusion. Herein, we investigated the charge carrier diffusion in a two-dimensional COF thin film generated through condensation of the building blocks benzodithiophene-dialdehyde (BDT) and N,N,N',N'-tetra(4-aminophenyl)benzene-1,4-diamine (W). We visualized the spatiotemporal evolution of photogenerated excited states in the 2D WBDT COF thin film using remote-detected time-resolved PL measurements (RDTR PL). Combined with optical pump terahertz probe (OPTP) studies, we identified two diffusive species dominating the process at different time scales. Initially, short-lived free charge carriers diffuse almost temperature-independently before relaxing into bound states at a rate of 0.7 ps-1. Supported by theoretical simulations, these long-lived bound states were identified as excitons. We directly accessed the lateral exciton diffusion within the oriented and crystalline film, revealing remarkably high diffusion coefficients of up to 4 cm2 s-1 (200 K) and diffusion lengths of several hundreds of nanometers and across grain boundaries. Temperature-dependent exciton transport analysis showed contributions from both incoherent hopping and coherent band-like transport. In the transport model developed based on these findings, we discuss the complex impact of order and disorder on charge carrier diffusion within the WBDT COF thin film.

Exploring high-connectivity three-dimensional covalent organic frameworks: topologies, structures, and emerging applications

Covalent organic frameworks (COFs) represent a highly versatile class of crystalline porous materials, formed by the deliberate assembly of organic building units into ordered two-dimensional (2D) and three-dimensional (3D) structures. Their unique combination of topological precision and tunable micro- or mesoporous architectures offers unmatched flexibility in material design. By selecting specific building units, reactive sites, and functional groups, COFs can be engineered to achieve customized skeletal, porous, and interfacial properties, opening the door to materials with optimized performance for diverse applications. Among recent advances, high-connectivity 3D COFs have emerged as a particularly exciting development, with their intricate network structures enabling unprecedented levels of structural complexity, stability, and functionality. This review provides a comprehensive overview of the synthesis strategies, topological design principles, structural characterization techniques, and emerging applications of high-connectivity 3D COFs. We explore their potential across a broad range of cutting-edge applications, including gas adsorption and separation, macromolecule adsorption, dye removal, photocatalysis, electrocatalysis, lithium-sulfur batteries, and charge transport. By examining these key areas, we aim to deepen the understanding of the intricate relationship between structure and function, guiding the rational design of next-generation COF materials. The continued advancements in this field hold immense promise for revolutionizing sectors such as energy storage, catalysis, and molecular separation, making high-connectivity 3D COFs a cornerstone for future technological innovations.

Azatriangulene-Based Conductive C═C Linked Covalent Organic Frameworks with Near-Infrared Emission

Two near-infrared (NIR) emissive π-conjugated covalent organic frameworks (COFs) pTANG1 and pTANG2 are synthesized using Knoevenagel condensation of trioxaazatriangulenetricarbaldehyde (TATANG) with benzene- and biphenyldiacetonitriles, respectively. The morphology of the COFs is affected by the size of TATANG precursor crystals. Donor-acceptor interactions in these COFs result in small bandgaps (≈1.6 eV) and NIR emission (λmax = 789 nm for pTANG1). pTANG1 can absorb up to 9 molecules of water per unit cell, which is accompanied by a marked quenching of the NIR emission, suggesting applications as humidity sensors. p-Doping with magic blue significantly increases the electrical conductivities of the COFs by up to 8 orders of magnitude, with the room temperature conductivity of pTANG1 reaching 0.65 S cm-1, the highest among reported C═C linked COFs. 1H NMR relaxometry, temperature-dependent fluorescence spectroscopy, and DFT calculations reveal that the higher rigidity of the shorter phenylene linker is responsible for the more extended conjugation (red-shifted emission, higher electrical conductivity) of pTANG1 compared to pTANG2.

Photons, Excitons, and Electrons in Covalent Organic Frameworks

Covalent organic frameworks (COFs) are created by the condensation of molecular building blocks and nodes to form two-dimensional (2D) or three-dimensional (3D) crystalline frameworks. The diversity of molecular building blocks with different properties and functionalities and the large number of possible framework topologies open a vast space of possible well-defined porous architectures. Besides more classical applications of porous materials such as molecular absorption, separation, and catalytic conversions, interest in the optoelectronic properties of COFs has recently increased considerably. The electronic properties of both the molecular building blocks and their linkage chemistry can be controlled to tune photon absorption and emission, to create excitons and charge carriers, and to use these charge carriers in different applications such as photocatalysis, luminescence, chemical sensing, and photovoltaics. In this Perspective, we will discuss the relationship between the structural features of COFs and their optoelectronic properties, starting with the building blocks and their chemical connectivity, layer stacking in 2D COFs, control over defects and morphology including thin film synthesis, exploring the theoretical modeling of structural, electronic, and dynamic features of COFs, and discussing recent intriguing applications with a focus on photocatalysis and photoelectrochemistry. We conclude with some remarks about present challenges and future prospects of this powerful architectural paradigm.

Air and Thermally Stable Fluoride Bridged Rare-Earth Clusters Showing Intense Photoluminescence and Potential LED Application

Fluoride based lattice is attractive for reducing phonon-induced quenching in rare-earth (RE) based luminescent materials. However, due to the strong affinity between RE and oxygen, the synthesis of fluoride-based complexes has to be protected under anhydrous conditions, and many known fluoride bridged RE clusters are unstable in air. Here, by using the "mixed-ligand" strategy a family of fluoride bridged RE clusters is synthesized, namely RE16(μ4-F)6(μ3-F)12(tBuCOO)18[N(CH2CH2O)3]4 (RE = Eu, EuFC-16; RE = Tb, TbFC-16), which are highly stable in air and decomposed thermally only when heating above 435 °C. Moreover, both clusters exhibit high photoluminescence quantum yields (PLQYEuFC-16 = 87.7%, PLQYTbFC-16 = 99.0%). Upon warming, EuFC-16 and TbFC-16 display excellent structural, thermal, and chroma stability. Thus, EuFC-16 and TbFC-16 have the potential to be used in light-emitting diode (LED) devices, offering many advantages over commercial phosphors. First, both clusters are soluble in UV-curable resin at any mixing rate, and the emission colors can be tuned from magenta, turquoise, willow green, and ivory to pure white if mixing blue phosphor BAM:Eu2+. Second, the clusters are hydrophobic, and the LEDs work well after soaking in water, indicating a good quality for outdoor lighting.

Recent advances in emerging nanozymes with aggregation-induced emission

AIE luminogens (AIEgens) are a class of unique fluorescent molecules that exhibit significantly enhanced luminescence properties and excellent photostability in the aggregated state. Recently, it has been found that some AIEgens can produce reactive oxygen species, which means that they may have potential enzyme-like activities and are thus termed "AIEzymes". Consequently, the discovery and design of novel AIEgens with enzyme-like properties have emerged as a new and exciting research direction. Additionally, AIEgens can enhance the catalytic efficiency of traditional nanozymes by direct combination, thereby endowing the nanozymes with multifunctionality. In this regard, nanozymes with aggregation-induced emission (AIE) properties, which represents a win-win integration, not only take full advantage of the low cost and stability of nanozymes, but also incorporate the excellent biocompatibility and fluorescence properties of AIEgens. These synergistic compounds bring about new opportunities for various applications, making AIEzymes of interest in biomedical research, food analysis, environmental monitoring, and especially imaging-guided diagnostics. This review will provide an overview of the latest strategies and achievements in the rational design and preparation of AIEzymes, as well as current research trends, future challenges and prospective solutions. We expect that this work will encourage and motivate more people to study and explore AIEzymes to further promote their applications in various fields.

Fluorescent Porous Materials Based on Aggregation-induced Emission for Biomedical Applications

Fluorescent porous materials based on aggregation-induced emission (AIE) are growing into a sparkling frontier in biomedical applications. Exploring those materials represents a win-win integration and has recently progressed at a rapid pace, mainly benefiting from intrinsic advantages including tunable pore size and structure, strong guest molecule encapsulation ability, superior biocompatibility, and photophysical outcomes. With the great significance and rapid progress in this area, this review provides an integrated picture on AIE luminogen-based porous materials. It encompasses inorganic, organic, and inorganic-organic porous materials, exploring fundamental concepts and the relationship between AIE performance and material design and highlighting significant breakthroughs and the latest trends in biomedical applications. In addition, some critical challenges and future perspectives in the development of AIE luminogen-based porous materials are also discussed.

Additive Mixing of Emissive Ligands in Covalent Organic Frameworks for White Light Emission

Emissive covalent organic frameworks (COFs) are a promising class of crystalline materials that have demonstrated applications for sensing and light-emitting diodes. However, white light emission from a single COF has not been achieved yet as it requires multicomponent organic chromophores that simultaneously emit blue, green, and red light. In this work, we report the successful synthesis of a single COF with efficient white light emission by utilizing tunable emission properties of 2,1,3-benzothiadazole after incorporating different functional groups on its core structure, which results in the formation of three ligands, i.e., 4',4-(benzothiadiazole-4,7-diyl)-dibenzaldehyde (BTD), 4,4'-(benzoselenadiazole-4,7-diyl)-dibenzaldehyde (BSD), and 4,4'-(naphtho[2,3-c][1,2,3] selenadiazole-4,9-diyl)-dibenzaldehyde (NSD), that emit in the blue, green, and red regions of the visible light spectrum. We show that white light emission can only occur when BTD, BSD, and NSD are assembled in a single COF structure due to the facilitated energy transfer process from BTD to BSD/NSD. This work demonstrates a unique approach to developing new white light-emitting materials based on the COF structure.

Low thermal quenching of metal halide-based metal-organic framework phosphor for light-emitting diodes

Phosphor-converted white light-emitting diodes (PC-WLEDs) have attracted considerable attention in solid-state lighting and display. However, urgent issues of thermal quenching and high cost remain formidable challenges. Herein, a novel metal-organic framework (MOF) phosphor [CdCl2(AD)] was facilely prepared using a mixture of CdCl2 and acridine (AD) under solvothermal conditions. It shows intensive green emission with a long lifetime of 31.88 ns and quantum yield of 65% while maintaining 95% and 84% of its initial emission intensity after remaining immersed in water for 60 days and being heated to 150 °C, respectively. The low thermal quenching of this MOF material is comparable to or can even exceed that of commercial inorganic phosphors. The combination of experiments and theoretical calculations reveals that the alternating arrangement of delocalized AD π-conjugated systems and CdCl2 inorganic chains through strong coordination bonds and π⋯π stacking interactions imparts the MOF phosphor with high thermal stability and optoelectronic performance. The successful fabrication of green and white LED devices by coating [CdCl2(AD)] and/or N630 red phosphor on a 365/460 nm commercial diode chip suggests a promising and potential alternative to commercial phosphors.

Analysis of COF-300 synthesis: probing degradation processes and 3D electron diffraction structure

Although COF-300 is often used as an example to study the synthesis and structure of (3D) covalent organic frameworks (COFs), knowledge of the underlying synthetic processes is still fragmented. Here, an optimized synthetic procedure based on a combination of linker protection and modulation was applied. Using this approach, the influence of time and temperature on the synthesis of COF-300 was studied. Synthesis times that were too short produced materials with limited crystallinity and porosity, lacking the typical pore flexibility associated with COF-300. On the other hand, synthesis times that were too long could be characterized by loss of crystallinity and pore order by degradation of the tetrakis(4-aminophenyl)methane (TAM) linker used. The presence of the degradation product was confirmed by visual inspection, Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). As TAM is by far the most popular linker for the synthesis of 3D COFs, this degradation process might be one of the reasons why the development of 3D COFs is still lagging compared with 2D COFs. However, COF crystals obtained via an optimized procedure could be structurally probed using 3D electron diffraction (3DED). The 3DED analysis resulted in a full structure determination of COF-300 at atomic resolution with satisfying data parameters. Comparison of our 3DED-derived structural model with previously reported single-crystal X-ray diffraction data for this material, as well as parameters derived from the Cambridge Structural Database, demonstrates the high accuracy of the 3DED method for structure determination. This validation might accelerate the exploitation of 3DED as a structure determination technique for COFs and other porous materials.

Covalent organic frameworks-based materials for antibiotics fluorescence detection

Antibiotics play a vital role in safeguarding people's health since most bacterial infection can be efficiently controlled and cured by treating with suitable antibiotics. However, excessive use of antibiotics in husbandry and aquaculture leaded to the pollution of eco-environment. Thus, it is important to develop simple facile methods and effective functional materials for quick on-site analysis of antibiotics. Covalent organic frameworks (COFs), as a kind of porous crystalline covalent bond linked polymers, have demonstrated its power in multiple fields. Herein, we will discuss COFs-based materials utilized as antibiotics sensors with fluorescence method. For each sensor, we will mainly discuss the mechanism for antibiotics recognition, the preparation, characterization and fluorescence sensing performance of specific antibiotics. The mechanism to illustrate the interaction between sensors and antibiotics analytes would also be stressed.

Modular Construction of Vinylene-Linked Covalent Organic Frameworks with Tunable Emission for Tumor Visualization

Covalent organic frameworks (COFs) with ordered π structures are very promising in porous light-emitting materials. However, most of these COFs are either poor in luminescence or lack of water-stability. Herein, a series of isostructural D-A vinylene-linked COFs were constructed based a new D2h symmetric linker 1,4-bis(4,6-dimethyl-1,3,5-triazin-2-yl)benzene (TMTA) with high crystallinity, comparative high surface area and excellent chemical/thermal stability. Impressively, their adsorption and luminescence wavelength vary with respect to the density of π-systems in the electron-donating group, which constitute the foundation for molecular engineering the luminescent properties of vinylene-linked COFs. The DFT calculations further established the relationship between the luminescence properties and the donor electronic structure. Moreover, one of representative COF named FZU-203 showed inspiring applications in bioimaging, which may further provide strategic guidance for the use of vinylene-linked COFs as fluorescent nanoprobes in non-invasive medical diagnosis and visualization therapy of tumors.

3D Covalent Organic Frameworks from Design, Synthesis to Applications in Optoelectronics

Covalent organic frameworks (COFs), a new class of crystalline materials connected by covalent bonds, have been developed rapidly in the past decades. However, the research on COFs is mainly focused on two-dimensional (2D) COFs, and the research on three-dimensional (3D) COFs is still in the initial stage. In 2D COFs, the covalent bonds exist only in the 2D flakes and can form 1D channels, which hinder the charge transport to some extent. In contrast, 3D COFs have a more complex pore structure and thus exhibit higher specific surface area and richer active sites, which greatly enhance the 3D charge carrier transport. Therefore, compared to 2D COFs, 3D COFs have stronger applicability in energy storage and conversion, sensing, and optoelectronics. In this review, it is first introduced the design principles for 3D COFs, and in particular summarize the development of conjugated building blocks in 3D COFs, with a special focus on their application in optoelectronics. Subsequently, the preparation of 3D COF powders and thin films and methods to improve the stability and functionalization of 3D COFs are summarized. Moreover, the applications of 3D COFs in electronics are outlined. Finally, conclusions and future research directions for 3D COFs are presented.

Topological Analysis and Structural Determination of 3D Covalent Organic Frameworks

3D covalent organic frameworks (3D COFs) constitute a new type of crystalline materials that consist of a range of porous structures with numerous applications in the fields of adsorption, separation, and catalysis. However, because of the complexity of the three-periodic net structure, it is desirable to develop a thorough structural comprehension, along with a means to precisely determine the actual structure. Indeed, such advancements would considerably contribute to the rational design and application of 3D COFs. In this review, the reported topologies of 3D COFs are introduced and categorized according to the configurations of their building blocks, and a comprehensive overview of diffraction-based structural determination methods is provided. The current challenges and future prospects for these materials will also be discussed.

Fine-tuning the pore environment of ultramicroporous three-dimensional covalent organic frameworks for efficient one-step ethylene purification

The construction of functional three-dimensional covalent organic frameworks (3D COFs) for gas separation, specifically for the efficient removal of ethane (C2H6) from ethylene (C2H4), is significant but challenging due to their similar physicochemical properties. In this study, we demonstrate fine-tuning the pore environment of ultramicroporous 3D COFs to achieve efficient one-step C2H4 purification. By choosing our previously reported 3D-TPB-COF-H as a reference material, we rationally design and synthesize an isostructural 3D COF (3D-TPP-COF) containing pyridine units. Impressively, compared with 3D-TPB-COF-H, 3D-TPP-COF exhibits both high C2H6 adsorption capacity (110.4 cm3 g-1 at 293 K and 1 bar) and good C2H6/C2H4 selectivity (1.8), due to the formation of additional C-H···N interactions between pyridine groups and C2H6. To our knowledge, this performance surpasses all other reported COFs and is even comparable to some benchmark porous materials. In addition, dynamic breakthrough experiments reveal that 3D-TPP-COF can be used as a robust absorbent to produce high-purity C2H4 directly from a C2H6/C2H4 mixture. This study provides important guidance for the rational design of 3D COFs for efficient gas separation.

Phospholipid-inspired alkoxylation induces crystallization and cellular uptake of luminescent COF nanocarriers

The porous nature and structural variability of covalent organic frameworks (COFs) make them preferred for drug loading and delivery applications. However, most COF materials suffer from poor luminescent properties and inefficiency for cell uptake. Herein, we experimentally demonstrate the crucial role of long alkoxy chains in the synthesis of crystalline COF nanostructures with high cellular uptake efficiency. After luminescence integration through band engineering, the semiconducting COF exhibits an optical bandgap of 2.05 eV, an emission wavelength of 632 nm, a high quantum yield of 37 %, and excellent fluorescence stability (100 % at 3 h). Such excellent optical properties of the designed COF nanocarriers enable quantitative evaluations of cellular uptake and visual tracking of drug delivery. It was demonstrated that the cellular uptake efficiency was enhanced by orders of magnitude for the COF after the introduction of long n-octyloxy chains, which firstly delivered the anticancer camptothecin (CPT) to cell lysosomes, and then underwent "endo/lysosomal escape" to induce cell apoptosis. In vivo assay evidenced a significant enhancement in the therapeutic effect with a 96 % inhibition of tumor growth after 14 days of treatment. This progress sheds light on designing cutting-edge drug delivery nanosystems based on COF materials with integrated diagnostic and therapeutic functions.

Inorganic-Organic Nanoarchitectonics: MXene/Covalent Organic Framework Heterostructure for Superior Microextraction

One of the difficulties limiting covalent organic frameworks (COFs) from becoming excellent adsorbents is their stacking/aggregation architectures owing to poor morphology/structure control during the synthesis process. Herein, an inorganic-organic nanoarchitectonics strategy to synthesize the MXene/COF heterostructure (Ti3 C2 Tx /TAPT-TFP) is developed by the assembly of β-ketoenamine-linked COF on the Ti3 C2 Tx MXene nanosheets. The as-prepared Ti3 C2 Tx /TAPT-TFP retains the 2D architecture and high adsorption capacity of MXenes as well as large specific surface area and hierarchical porous structure of COFs. As a proof of concept, the potential of Ti3 C2 Tx /TAPT-TFP for solid-phase microextraction (SPME) of trace organochlorine pesticides (OCPs) is investigated. The Ti3 C2 Tx /TAPT-TFP based SPME method achieves low limits of detection (0.036-0.126 ng g-1 ), wide linearity ranges (0.12-20.0 ng g-1 ), and acceptable repeatabilities for preconcentrating trace OCPs from fruit and vegetable samples. This study offers insights into the potential of constructing COF or MXene-based heterostructures for the microextraction of environmental pollutants.

Pyrolysis Free Out-of-Plane Co-Single Atomic Sites in Porous Organic Photopolymer Stimulates Solar-Powered CO2 Fixation

Herein, a facile strategy is illustrated to develop pyrolysis-free out-of-plane coordinated single atomic sites-based M-POP via a one-pot Friedel Craft acylation route followed by a post-synthetic metalation. The optimized geometry of the Co@BiPy-POP clearly reveals the presence of out-of-plane Co-single atomic sites in the porous backbone. This novel photopolymer Co@BiPy-POP shows extensive π-conjugations followed by impressive light harvesting ability and is utilized for photochemical CO2 fixation to value-added chemicals. A remarkable conversion of styrene epoxide (STE) to styrene carbonate (STC) (≈98%) is obtained under optimized photocatalytic conditions in the existence of promoter tert-butyl ammonium bromide (TBAB). Synchrotron-based X-ray adsorption spectroscopy (XAS) analysis reveals the single atom coordination sites along with the metal (Co) oxidation number of +2.16 in the porous network. Moreover, in situ diffuse reflectance spectroscopy (DRIFTS) and electron paramagnetic resonance (EPR) investigations provide valuable information on the evolution of key reaction intermediates. Comprehensivecomputational analysis also helps to understand the overall mechanistic pathway along with the interaction between the photocatalyst and reactants. Overall, this study presents a new concept of fabricating porous photopolymers based on a pyrolysis-free out-of-plane-coordination strategy and further explores the role of single atomic sites in carrying out feasible CO2 fixation reactions.

Design and preparation of fluorescent covalent organic frameworks for biological sensing

Covalent organic frameworks (COFs) are a new class of functional solids featuring several fantastic structural characteristics, including a great diversity of building units and cross-linking patterns, precise integration of building blocks, and adjustable topology of porous architecture. In addition to the above features, some COF samples are constructed with high-density conjugated fragments, which have unique potential advantages in fluorescence imaging, and thus may have great potential applications in bioimaging. Herein, this article summarizes the recent progress in the design and preparation of fluorescent covalent organic frameworks. We investigate the systemic correlation between the structural qualities of COF networks and biological sensors. Finally, the significant advantages, major challenges, and future opportunities of fluorescent covalent organic frameworks are discussed for the development of next-generation porous materials for sensing applications.

Rational Synthesis of Functionalized Covalent Organic Frameworks via Four-Component Reaction

The construction of function-oriented covalent organic frameworks (COFs) remains a challenge as it requires simultaneous consideration of diversified structures, robust linkage, and tailorable functionalities. Herein, we report the rational synthesis of functionalized COFs via a four-component reaction strategy. Through the four-component Debus-Radziszewski reaction, 11 N-substituted imidazole-based COFs with diversified structures were facilely constructed from readily available building blocks. By forming the N-substituted imidazole linkage, these synthesized COFs displayed ultrastability toward strong acids and base. Moreover, the four components reaction allows the rational synthesis of COFs with tailorable functionalities. As an example, the phosphonate-functionalized COF (LZU-530) was rationally constructed for the efficient adsorption of uranium(VI). The uranium(VI) uptake of LZU-530 reaches up to 95 mg·g-1 in 2 M HNO3, which is the highest uptake of the existing organic porous materials under such harsh conditions. Our results highlight the use of multicomponent reaction for the rational synthesis of robust and functionalized COFs toward targeted applications.

Enhancing Fluorescence in Both Solution and Solid States Induced by Imine Cage Formation

Developing luminescent materials that exhibit strong emissions in both solution and solid phases is highly desirable and challenging. Herein, we report imine-bond directed formation of a rigid organic cage (TPE-cage) that was synthesized by [2+4] imine condensation of a TPE-cored tetra-aldehyde (TPE-TA) with a clip-like diamine (XA) to illustrate confinement-induced fluorescence enhancement. Compared to the non-emissive TPE-TA (ϕF =0.26 %) in the dichloromethane (DCM) solution, the TPE-cage achieved a remarkable (~520-fold) emission enhancement (ϕF =70.38 %). In contrast, a monomeric tetra-imine model compound (TPE-model) showed only a minor enhancement (ϕF =0.56 %) in emission compared to the parent tetra-aldehyde TPE-TA. The emission of TPE-cage was further enhanced by ~1.5-fold (ϕF =80.96 %) in the aggregated state owing to aggregation-induced emission enhancement (AIEE). This approach establishes the potential for synthesizing luminescent materials with high emission in both solution and solid-state by employing a single-step imine condensation reaction.

Achieving Ultralong Room-Temperature Phosphorescence in Covalent Organic Framework System

The combination of room-temperature phosphorescence (RTP) and covalent organic frameworks (COFs) would give rise to a new class of functional materials with sensing and responsive properties. However, such organic materials have been rarely reported, especially for those with long phosphorescence lifetimes. Here we report the incorporation of RTP emitters into COFs either via chemical decoration or noncovalent doping to achieve ultralong RTP in a COF system. The RTP emitters are designed with small phosphorescence rates and consequently exhibit ultralong phosphorescence lifetimes when nonradiative decay and oxygen quenching are suppressed in COF system. The RTP-COF materials have been found to possess oxygen sensing properties with large response of phosphorescence lifetimes.

A Stimuli-Responsive Dual-Emitting Covalent Organic Framework Shows Selective Sensing of Highly Corrosive Acidic Media via Fluorescence Turn-On Signal with White Light Emission

Luminescent covalent organic frameworks (LCOFs) have been employed as platforms for sensing analytes. Judicial incorporation of appropriate functional units inside the framework leads to the different electronic states in the presence of external stimuli, e.g., temperature, pH, etc. We report herein a new COF (TPEPy) as a solid-state acid sensor specific for the highly acidic environments that range from pH ∼0.5 to ∼3.0. This COF shows a protonation-induced reversible color change from bright yellow to deep red upon decreasing the pH from 3 to 0.5 and vice versa. No visual color change was, however, observed above pH 3.0. Photoluminescence (PL) studies show that the intrinsic emission peak of the TPEPy COF at 530 nm is shifted to 420 nm owing to the N-protonation of the imine nitrogen of COF within this pH range. Extensive studies demonstrate that the protonation behavior of the COF is counterion dependent. This was revealed when different acids, e.g., HCl, HNO3, HBr, and HI, were employed. The intensity of the proton-induced emission peak at 420 nm depends significantly upon the counterions with the order of HCl > HNO3 > HBr > HI. These anions interact with the protonated TPEPy COF by cation-anion and H-bonding interactions. Further, the pristine COF showed near white light emission at a particular pH of 2.5 (CIE coordinates 0.27, 0.32). From the PL spectrophotometric titrations, the deprotonation pKa was experimentally found to be 1.8 ± 0.02 for the TPEPy COF. The sensor reported herein is reversible, reusable, and regenerable and is useful for assessing pH fluctuations within a strongly acidic range via digital signaling.

Three-Motif Molecular Junction Type Covalent Organic Frameworks for Efficient Photocatalytic Aerobic Oxidation

Covalent organic frameworks (COFs), with the features of flexible structure regulation and easy introduction of functional groups, have aroused broad interest in the field of photocatalysis. However, due to the low light absorption intensity, low photoelectron conversion efficiency, and lack of suitable active sites, it remains a great challenge to achieve efficient photocatalytic aerobic oxidation reactions. Herein, based on reticular chemistry, we rationally designed a series of three-motif molecular junction type COFs, which formed dual photosensitizer coupled redox molecular junctions containing multifunctional COF photocatalysts. Significantly, due to the strong light adsorption ability of dual photosensitizer units and integrated oxidation and reduction features, the PY-BT COF exhibited the highest activity for photocatalytic aerobic oxidation. Especially, it achieved a photocatalytic benzylamine conversion efficiency of 99.9% in 2.5 h, which is much higher than that of the two-motif molecular junctions with only one photosensitizer or redox unit lacking COFs. The mechanism of selective aerobic oxidation was studied through comprehensive experiments and density functional theory calculations. The results showed that the photoinduced electron transfer occurred from PY and then through triphenylamine to BT. Furthermore, the thermodynamics energy for benzylamine oxidation on PY-BT COF was much lower than that for others, which confirmed the synergistic effect of dual photosensitizer coupled redox molecular junction COFs. This work provided a new strategy for the design of functional COFs with three-motif molecular junctions and also represented a new insight into the multifunctional COFs for organic catalytic reactions.

Triple Isomerism in 3D Covalent Organic Frameworks

Isomerism in covalent organic frameworks (COFs) has scarcely been known. Here, for the first time we show 3D COFs with three framework isomers or polymorphs constructed from the same building blocks. All isomers were obtained as large (>10 μm) crystals; although their crystal shapes were distinctly different, they showed identical FT-IR and solid-state NMR spectra. Our structural analyses revealed unprecedented triple isomerism in 3D COFs (noninterpenetrated dia, qtz, and 3-fold interpenetrated dia-c3 nets). Furthermore, this Communication reports the first known COF with qtz topology for which the structure determination was based on Rietveld analysis. We achieved triple framework isomerism by reticulating a tetrahedral building block with a flexible junction and a linear building block with PEO side chains and by varying solution compositions. Our energy calculations, along with the discovery of interisomer transition, revealed that the isomer with qtz topology was a kinetic isomer. Thus, this simple yet little-explored concept of reticulating only flexible building blocks is an effective pathway to significantly broaden the diversity of 3D COFs, which have been proposed for a myriad of applications.

Hydrogen Isotope Effect Endows a Breakthrough in Photoluminescent Covalent Organic Frameworks

Luminescent covalent organic frameworks (LCOFs) have emerged as indispensable candidates in various applications due to their greater tunable emitting properties and structural robustness compared to small molecule emitters. An unsolved issue in this area is developing highly luminescent LCOFs of which the nonradiative quenching pathways were suppressed as much as possible. Here, a robust aminal-linked COF (DD-COF) possessing perdeuterated light-emitting monomers was designed and synthesized. The solid-state photoluminescence quantum yield of the DD-COF reaches 81%, significantly outcompeting all state-of-the-art LCOFs reported so far. The exceptional luminescent efficiency is attributed to the inhibition of different pathways of nonradiative decay, especially from bond vibrations where only substitution by a heavier isotope with a lower zero-point vibration frequency works. Furthermore, the prepared deuterated COF not only boosts higher photostability under UV irradiation but also enables superior fluorescence sensing performance for iodine detection compared to nondeuterated COF.

Sculpting Mesoscopic Helical Chirality into Covalent Organic Framework Nanotubes from Entirely Achiral Building Blocks

The diversification of chirality in covalent organic frameworks (COFs) holds immense promise for expanding their properties and functionality. Herein, we introduce an innovative approach for imparting helical chirality to COFs and fabricating a family of chiral COF nanotubes with mesoscopic helicity from entirely achiral building blocks for the first time. We present an effective 2,3-diaminopyridine-mediated supramolecular templating method, which facilitates the prefabrication of helical imine-linked polymer nanotubes using unprecedented achiral symmetric monomers. Through meticulous optimization of crystallization conditions, these helical polymer nanotubes are adeptly converted into imine-linked COF nanotubes boasting impressive surface areas, while well preserving their helical morphology and chiroptical properties. Furthermore, these helical imine-linked polymers or COFs could be subtly transformed into corresponding more stable and functional helical β-ketoenamine-linked and hydrazone-linked COF nanotubes with transferred circular dichroism via monomer exchange. Notably, despite the involvement of covalent bonding breakage and reorganization, these exchange processes overcome thermodynamic disadvantages, allowing mesoscopic helical chirality to be perfectly preserved. This research highlights the potential of mesoscopic helicity in conferring COFs with favourable chiral properties, providing novel insights into the development of multifunctional COFs in the field of chiral materials chemistry.

Highly luminescent olefin-linked covalent organic frameworks

A new olefin-linked covalent organic framework (COF) was developed using 1,3,5-triformylbenzene (TFB) and tetraethyl p-xylylenediphosphonate (TEXDP) as building blocks through a Horner-Wadsworth-Emmons reaction. By combination of the aromatic columnar ordering and high conjugation, the resulting TFB-TEXDP-COF exhibits a fluorescence quantum yield of up to 41%, which constitutes the new record value among COFs.

Revolutionizing the structural design and determination of covalent-organic frameworks: principles, methods, and techniques

Covalent organic frameworks (COFs) represent an important class of crystalline porous materials with designable structures and functions. The interconnected organic monomers, featuring pre-designed symmetries and connectivities, dictate the structures of COFs, endowing them with high thermal and chemical stability, large surface area, and tunable micropores. Furthermore, by utilizing pre-functionalization or post-synthetic functionalization strategies, COFs can acquire multifunctionalities, leading to their versatile applications in gas separation/storage, catalysis, and optoelectronic devices. Our review provides a comprehensive account of the latest advancements in the principles, methods, and techniques for structural design and determination of COFs. These cutting-edge approaches enable the rational design and precise elucidation of COF structures, addressing fundamental physicochemical challenges associated with host-guest interactions, topological transformations, network interpenetration, and defect-mediated catalysis.

Dendrimer-Encapsulated Halide Perovskite Nanocrystals for Self-Powered White Light-Emitting Glass

Perovskite nanocrystals (PNCs) have attracted substantial attention due to their inspiring intrinsic merits such as low cost, high performance, and solution processability, but when it comes to the usage of blends of different colored PNCs with the purpose of covering the broadband spectrum field, the high degree of instability remains a major bottleneck. Herein, we report a family of dendritic ammonium ligands that act as stiff shell-encapsulating PNCs for improving their stability and suppressing ion permeability in mixed colloidal PNC solutions. The as-synthesized ligand-encapsulated PNCs notably achieve near-unity photoluminescence quantum yields (PLQYs) and strongly resist the unwanted ion exchange reaction under aggressive anion source attack. To fabricate self-powered white-emitting glass, the stabilized mixed colored PNCs were embedded into the laminated glass, which simultaneously acted as absorbers-emitters for luminescent solar concentrators (LSCs) and emitters for white light-emitting glass.

COF@COF: Constructing Core-Shell Structured Covalent-Organic Frameworks from Interpenetration Isomers

Core-shell structured covalent-organic frameworks (COFs) have rarely been reported because of the essentially inevitable crystallographic structural distinctions of different COF species. In this contribution, we outline a novel strategy for constructing core-shell structured COFs from interpenetration isomers and take the classic three-dimensional COF-300 as a proof-of-concept. Core-shell particles with 5-fold interpenetrated COF-300 as the core and 7-fold interpenetrated COF-300 as the shell were prepared via a two-step process, using exactly the same monomers but under different reaction conditions within each step. Moreover, the thicknesses of both the core and shell show adjustable characteristics. This approach may promote the future advancement of hierarchical microstructures with predesigned functions in different hierarchies.

Linkages Make a Difference in the Photoluminescence of Covalent Organic Frameworks

Covalent organic frameworks (COFs) with structural designability and tunability of photophysical properties enable them to be a promising class of organic luminescent materials by incorporating well-designed fluorescent units directly into the periodic skeletons. The photophysical properties of COFs are mainly affected by the structural features, which determine the conjugation degree, charge delocalization ability, and exciton dynamics of COFs. To understand the relationship between COF structures and their photophysical properties, two COFs with the same pyrene chromophore units but different linkages (imine or vinylene) were designed and synthesized. Interestingly, different linkages endow COFs with huge differences in solid-state photoluminescence quantum yield (PLQY) for imine- and vinylene-linked pyrene-based COFs, which possess PLQY values of 0.34 % and 15.43 %, respectively. The femtosecond-transient absorption spectra and time-dependent density functional theory reveal the different charge-transfer pathways in imine- and vinylene-linked COFs, which influence the exciton relaxation way and fluorescence intensity. In addition, an effective white-light device was obtained by coating the vinylene-linked COF on a light-emitting diode strip.

U-type π-conjugated phosphorescent ligand sensitized lanthanide metal-organic frameworks for efficient white-light-emitting diodes

Lanthanide metal-organic framework (Ln-MOF) based phosphors for light-emitting diodes (LEDs) play an important role in the fields of solid-state lighting and display. The rational design of organic antennae to address the drawback of low extinction coefficients of the lanthanide ions is highly desired. In this work, we provide a new design strategy to achieve an energy transfer molecule with a through-space conjugated folded structure, which can strengthen the skeleton rigidity and facilitate triplet state energy transfer. Consequently, one U-type π-conjugated molecule 2,6-bis(3,5-dicarboxylphenoxy) pyridine (H4L) was selected as a light gatherer to sensitize lanthanide ions for the construction of Ln-MOFs [Ln(HL)(H2O)3]n (Eu-MOF and Tb-MOF), which exhibit a long-lived luminescence lifetime (0.88 ms for Eu-MOF and 1.31 ms for Tb-MOF) and high quantum yields (50.87% for Eu-MOF and 85.64% for Tb-MOF). Furthermore, a white LED device with a colour rendering index (89) was fabricated using the mixture of Ln-MOFs with a commercial blue phosphor.

Enhancing the Iodine Adsorption Capacity of Pyrene-Based Covalent Organic Frameworks by Regulating the Pore Environment

Regulating of pore environment is an efficient way to improve the performance of covalent organic frameworks (COFs) for specific application requirements. Herein, the design and synthesis of two pyrene-based 2D COFs with -H or -Me substituents, TFFPy-PPD-COF and TFFPy-TMPD-COF are reported. Both of them show long order structure and high porosity, in which TFFPy-PPD-COF displays a larger pore volume and bigger BET surface area (2587 m2 g-1 , 1.17 cm3 g-1 ). Interestingly, TFPPy-TMPD-COF exhibits a much higher vapor iodine capacity (4.8 g g-1 ) than TFPPy-PPD-COF (2.9 g g-1 ), in contrast to their pore volume size. By using multiple techniques, the better performance of TFPPy-TMPD-COF in iodine capture is ascribed to the altered pore environment by introducing methyl groups, which contributes to the formation of polyiodide anions and enhances the interactions between the frameworks and iodine. These results will be helpful for understanding the effect of pore environment in COFs for iodine uptake and constructing novel structure with high iodine capture performance.

Vinylene-Linked Emissive Covalent Organic Frameworks for White-Light-Emitting Diodes

Covalent organic frameworks (COFs) have gained considerable attention due to their highly conjugated π-skeletons, rendering them promising candidates for the design of light-emitting materials. In this study, we present two vinylene-linked COFs, namely, VL-COF-1 and VL-COF-2, which were synthesized through the Knoevenagel condensation of 2,4,6-trimethyl-1,3,5-triazine with terephthalaldehyde or 4,4'-biphenyldicarboxaldehyde. Both VL-COF-1 and VL-COF-2 exhibited excellent chemical and thermal stability. The presence of vinylene linkages between the constituent building blocks in these COFs resulted in broad excitation and emission properties. Remarkably, the designed VL-COFs demonstrated bright emission, fast fluorescence decay, and high stability, making them highly attractive for optoelectronic applications. To assess the potential of these VL-COFs in practical devices, we fabricated white-light-emitting diodes (WLEDs) coated with VL-COF-1 and VL-COF-2. Notably, the WLEDs coated with VL-COF-1 achieved high-quality white light emission, closely approximating standard white light. The promising performance of VL-COF-coated WLEDs suggests the feasibility of utilizing COF materials for stable and efficient lighting applications.

A Fluorescent Three-Dimensional Covalent Organic Framework Formed by the Entanglement of Two-Dimensional Sheets

Herein, we report the introduction of steric hindrance in molecular building blocks to prevent π···π stacking, thus allowing two-dimensional (2D) covalent organic sheets to form three-dimensional (3D) covalent organic frameworks (COFs) through entanglement. Starting from the rationally designed precursors containing a bulky anthracene unit in the vertical direction, a highly crystalline COF (3D-An-COF) was successfully synthesized. Very interestingly, 3D-An-COF was determined as an entangled 2D square net (sql) structure, and the high-resolution data (1.1 Å) obtained by the continuous rotation electron diffraction technique allowed us to directly locate all non-hydrogen atoms. Structurally, the presence of an anthracene group outside the C2h symmetry plane strongly reduces the π···π interactions and promotes the formation of square entanglements. In addition, 3D-An-COF is fluorescent and can be used as a sensor to detect the trace amount of antibiotics in water. This study provides a new strategy for the structural diversification of 3D COFs and will certainly motivate us to construct more entangled COFs for interesting applications in the future.

Ultrasensitive levofloxacin electrochemical biosensor based on semiconducting covalent organic framework/poly-L-cysteine/triangular Ag nanoplates modified glassy carbon electrode

A novel electrochemical biosensor with excellent performance was fabricated for levofloxacin (LEV) detection, which adopted triangular Ag nanoplates (Tri-AgNP) confined in a poly-L-cysteine (poly-L-Cys) film and a semiconducting covalent organic framework (COF) as the electrochemical sensing material. The developed electrochemical sensor revealed excellent analytical properties because of its good electrical conductivity, fast electron transfer, and abundant bioactive site. Based on this, a linear relationship between the LEV concentration and the peak current response at 0.92 V was obtained under the optimal experimental conditions by differential pulse voltammetry (DPV), with a wide linear range of 0.05 to 600 μM and a low limit of detection (LOD) of 0.0061 μM. The prepared sensor also realized sensitive and accurate determination of LEV in human serum and urine samples by standard addition method, with satisfactory recoveries (97.1 to 104%) and a low relative standard deviation of less than 4.6%. These results indicated that the novel ternary system has a promising application in the development of electrochemical signal probe and electrochemical biosensing platform.

Large-Scale Synthesis of Covalent Organic Frameworks: Challenges and Opportunities

Connecting organic building blocks by covalent bonds to design porous crystalline networks has led to covalent organic frameworks (COFs), consequently transferring the flexibility of dynamic linkages from discrete architectures to extended structures. By virtue of the library of organic building blocks and the diversity of dynamic linkages and topologies, COFs have emerged as a novel field of organic materials that propose a platform for tailor-made complex structural design. Progress over the past two decades in the design, synthesis, and functional exploration of COFs in diverse applications successively established these frameworks in materials chemistry. The large-scale synthesis of COFs with uniform structures and properties is of profound importance for commercialization and industrial applications; however, this is in its infancy at present. An innovative designing and synthetic approaches have paved novel ways to address future hurdles. This review article highlights the fundamental of COFs, including designing principles, coupling reactions, topologies, structural diversity, synthetic strategies, characterization, growth mechanism, and activation aspects of COFs. Finally, the major challenges and future trends for large-scale COF fabrication are outlined.

Saturated Linkers in Two-Dimensional Covalent Organic Frameworks Boost Their Luminescence

The development of highly luminescent two-dimensional covalent organic frameworks (COFs) for sensing applications remains challenging. To suppress commonly observed photoluminescence quenching of COFs, we propose a strategy involving interrupting the intralayer conjugation and interlayer interactions using cyclohexane as the linker unit. By variation of the building block structures, imine-bonded COFs with various topologies and porosities are obtained. Experimental and theoretical analyses of these COFs disclose high crystallinity and large interlayer distances, demonstrating enhanced emission with record-high photoluminescence quantum yields of up to 57% in the solid state. The resulting cyclohexane-linked COF also exhibits excellent sensing performance for the trace recognition of Fe³⁺ ions, explosive and toxic picric acid, and phenyl glyoxylic acid as metabolites. These findings inspire a facile and general strategy to develop highly emissive imine-bonded COFs for detecting various molecules.

Constructing a 3D Covalent Organic Framework from 2D hcb Nets through Inclined Interpenetration

Three-dimensional covalent organic frameworks (3D COFs) have been of great interest due to their inherent numerous open sites and pore confinement effect. However, it has remained challenging to build 3D frameworks via interdigitation (also known as inclined interpenetration) by generating an entangled network formed by multiple 2D layers inclined with respect to each other. Herein, we report the first case of constructing a 3D COF, termed COF-904, through interdigitating 2D hcb nets, which was formed via [3+2] imine condensation reactions by the use of 1,3,5-triformylbenzene and 2,3,5,6-tetramethyl-1,4-phenylenediamine. The single-crystal structure of COF-904 is solved, and the locations of all non-hydrogen atoms are determined by 3D electron diffraction with a resolution up to 0.8 Å. These results not only broaden the strategy for achieving 3D COFs via interdigitation but also demonstrate that structurally complex extended frameworks can arise from simple molecules.

[2,2] Paracyclophanes-based double helicates for constructing artificial light-harvesting systems and white LED device

The construction of efficient artificial light-harvesting systems (ALHSs) is of vital importance in utilizing solar energy. Herein, we report the non-covalent syntheses of double helicates PCP-TPy1/2 and Rp,Rp-PCP-TPy1/2 by metal-coordination interaction and their applications in ALHSs and white light-emitting diode (LED) device. All double helicates exhibit significant aggregation-induced emission in tetrahydrofuran/water (1:9, v/v) solvent. The aggregated double helicates can be used to construct one-step or sequential ALHSs with fluorescent dyes Eosin Y (EsY) and Nile red (NiR) with the energy transfer efficiency up to 89.3%. Impressively, the PMMA film of PCP-TPy1 shows white-light emission when doped 0.075% NiR, the solid of double helicates (Rp,Rp-) PCP-TPy2 can be used as the additive of a blue LED bulb to achieve white-light emission. In this work, we provided a general method for the preparation of novel double helicates and explored their applications in ALHSs and fluorescent materials, which will promote future construction and application of helicates as emissive devices.