Single-atom Ni-N4 provides a robust cellular NO sensor

Three-Electron Uric Acid Oxidation via Interdistance-Dependent Switching Pathways in Correlated Single-Atom Catalysts for Boosting Sensing Signals

The overly simplistic geometric and electronic structures of single-atom catalysts have become a significant bottleneck in the field of single-atom sensing, impeding both the design of highly efficient electrochemical sensors and the establishment of structure-activity relationships. To address these challenges, we present a novel strategy to boost the sensing performance of single-atom catalysts by precisely tuning the single-atomic interdistance (SAD) in correlated single-atom catalysts (c-SACs). A series of Ru-based c-SACs (Rud=6.2 Å, Rud=7.0 Å, and Rud=9.3 Å) are synthesized with predetermined SAD values, which are comprehensively characterized by various techniques. Electrochemical studies on uric acid (UA) oxidation reveal that Rud=6.2 Å demonstrates an extraordinary sensitivity of 9.83 μA μM-1cm-2, which is superior to most of electrochemistry biosensors reported previously. Kinetic analysis and product examination unveil that the 6.2 Å Ru SAD instigates a distinctive three-electron oxidation of UA, with an extra electron transfer compared to the conventional two-electron pathway, which fundamentally enhances its sensitivity. Density functional theory calculations confirm the optimal SAD facilitates dual-site UA adsorption and accelerated charge transfer dynamics. This investigation provides novel insights into the strategic engineering of high-performance SAC-based electrochemical sensors by precisely controlling the atomic-scale structure of active sites.

An Atomically Dispersed Pd Sub-Metallene: Intermediate State of Single Atoms and Metal Bonds

Despite the metal coordination and single-atom catalyst (SAC) have been extensively investigated in surface science over the past decade, their overall activity in involving multi-step reactions remains unsatisfactory owing to the metal bond and single atom being irreconcilable. Here, a stable atomically dispersed Pd sub-metallene (Pd ADSM) layer supported on the 2D MXene (Mo2TiC2) is reported, which combines the advantages of 2D structures, single atoms, and metal bonds. Pd ADSM shows covalent structures along the z-coordination and highly coordinated metal bonds in the 2D direction. During the alkaline hydrogen evolution reaction (HER), Pd ADSM shows 7- and 112-times higher mass activity than the SAC (Pd SAC) and commercial Pt/C at the overpotential of -108 mV, respectively. Operando characterizations and theoretical calculations reveal that the Pd─Pd interface not only makes the adsorbed water form a flexible hydrogen-bonded skeleton closer to the catalytic center but also reduces the energy barrier for the HER rate-determining step. Moreover, the moderate adsorption energy of Pd─Pd bonds in ADSM can rapidly activate, dissociate, and desorb hydrogen molecules at room temperature, resulting in record-high hydrogen sensing performances (Response time, Recovery time, and Sensitivity for 100 ppm H2 are 4.8, 1.6 s, and 43.5%, respectively).

Ligand spin immobilization in metal-organic frameworks enables high-performance chemispintronic detection of radical gas molecules

The precise quantification of gaseous radicals in exhaled breath, such as fractional exhaled nitric oxide, serves as an invaluable noninvasive clinical diagnosis particularly in discerning various respiratory disorders. To date, the development of high-performance nitric oxide sensors compatible to modern electronic devices remains fundamentally challenging. We report that metal-organic frameworks (MOFs) with ligand spin immobilization demonstrate superior chemispintronic sensitivity and selectivity toward nitric oxide. Tetrathiafulvalene radical cations (TTF·+) within the MOF lattice considerably enhance the nitric oxide recognition via spin exchange interactions, leading to a five-order of magnitude reduction in the limit of detection (LOD), as compared to volatile organic compounds (VOCs) via carrier-doping mechanism. Record-low LOD of 0.12 parts per billion was achieved in M-TTF-spin (M = cobalt, zinc, and cadmium) MOFs, which also demonstrates exceptional selectivity over typical nitrogen oxides (NOx) and VOCs. This work opens up a distinct sensing platform for radical-like analytes through strategic design of spin-immobilized molecular functional motifs toward the spintronic device configurations.

Single-atom catalysts enabled electrochemical sensing for glucose

Accurate and rapid monitoring of the glucose concentration in blood is essential for the prevention and treatment of diabetes. However, existing glucose sensors still have room for improvement in terms of sensitivity, selectivity, and stability. Benefiting from the fully exposed metal sites and uniform coordination environment, single-atom catalysts (SACs) have exhibited unique electrochemical sensing performances and received extensive attention in blood glucose detection. A growing number of researches have focused on the close connection between structural regulation of SACs and high efficiency glucose sensing. In this review, we start from the development of sensing devices, function materials related to glucose detection and electrochemical glucose sensing mechanisms. Then, the superiorities of SACs and a variety of SACs-based glucose sensors are proposed. The interact models between the single-atom active species and the reactants (including enzymatic and non-enzymatic environment) will be highlighted. Finally, the precise and large-scale synthesis, followed by the exploration of sensing mechanism, and concluding with opportunities and challenges of SACs in electrochemical glucose detection are outlined.

Heteroatom decorated C2N monolayer for gas-sensing application: Insight from first-principles

Development of novel gas-sensing materials is essential to high-performance gas sensors for monitoring target gases in industrial production and environmental protection. Herein, we investigate two types of the heteroatom-decorated C2N monolayer, denoted as M@C2N (M = Mn and Ni) and B-C2N, for their gas-sensing functionality toward seven small gaseous molecules (H2, O2, N2, CO, CO2, NH3, and H2O). The key gas-sensing characteristics concerning chemiresistive (CR) and field-effect transistor (FET) gas sensing have been thoroughly explored. The results show that Mn@C2N and Ni@C2N can work as either CR or FET gas-sensing materials for detecting H2, O2, N2, CO, CO2, NH3, and H2O, whereas B-C2N can work as a disposable gas sensor for O2, H2O, and NH3. Mn@C2N and Ni@C2N are the most selective toward O2 and NH3, followed by CO and H2O in an oxygen- and ammonia-free environment, while B-C2N is the most selective toward H2O and NH3. More importantly, the adsorption strength of target molecule plays a critical role in gas-sensing mechanism as well as selectivity, recovery time, and sensitivity. This study offers theoretical perspectives on 2D hybrid carbon-based nanomaterials for efficient gas sensing.

Flexible Fiber Sensors for Real-Time Monitoring of Redox Signaling Molecules in Exercise-Mimicking Engineered Skeletal Muscle

Real-time monitoring of reactive oxygen and nitrogen species (RONS) in skeletal muscle provides crucial insights into the cause-and-effect relationships between physical activity and health benefits. However, the dynamic production of exercise-induced RONS remains poorly explored, due to the lack of sensing tools that can conform to soft skeletal muscle while monitor RONS release during exercise. Here we introduce dual flexible sensors via twisting carbon nanotubes into helical bundles of fibers and subsequent assembling electrochemical sensing components. These flexible sensors exhibit low bending stiffness, excellent H2O2 and NO sensing abilities, outstanding biocompatibility and compliance with engineered skeletal muscle tissue. This allows real-time and simultaneous monitoring of H2O2 and NO release from engineered skeletal muscle in response to different exercise-mimicking stretches, which reveals that warm-up activities before high-intensity exercise may enhance adaptive responses by down-regulating H2O2 and up-regulating NO production. The proposed sensing strategy demonstrates great versatility in monitoring multiple biomarkers of soft tissue and organs.

On-Chip Electrochemical Sensor Based on 3D Graphene Assembly Decorated Ultrafine RuCu Alloy Nanocatalyst for In Situ Detection of NO in Living Cells

In this work, we developed 3D ionic liquid (IL) functionalized graphene assemblies (GAs) decorated by ultrafine RuCu alloy nanoparticles (RuCu-ANPs) via a one-step synthesis process, and integrated it into a microfluidic sensor chip for in situ electrochemical detection of NO released from living cells. Our findings have demonstrated that RuCu-ANPs on 3D IL-GA exhibit high density, uniform distribution, lattice-shaped arrangement of atoms, and extremely ultrafine size, and possess high electrocatalytic activity to NO oxidation on the electrode. Meanwhile, the 3D IL-GA with hierarchical porous structures can facilitate the efficient electron/mass transfer at the electrode/electrolyte interface and the cell culture. Moreover, the graft of IL molecules on GA endows it with high hydrophilicity for facile and well-controllable printing on the electrode. Consequently, the resultant electrochemical microfluidic sensor demonstrated excellent sensing performances including fast response time, high sensitivity, good anti-interference ability, high reproducibility, long-term stability, as well as good biocompatibility, which can be used as an on-chip sensing system for cell culture and real-time in situ electrochemical detection of NO released from living cells with accurate and stable characteristics in physiological conditions.

Advances in Electrochemical Nitrite Reduction toward Nitric Oxide Synthesis for Biomedical Applications

Nitric oxide (NO) is an essential molecule in biomedicine, recognized for its antibacterial properties, neuronal modulation, and use in inhalation therapies. The effectiveness of NO-based treatments relies on precise control of NO concentrations tailored to specific therapeutic needs. Electrochemical generation of NO (E-NOgen) via nitrite (NO2 -) reduction offers a scalable and efficient route for controlled NO production, while also addressing environmental concerns by reducing NO2 - pollution and maintaining nitrogen cycle balance. Recent developments in catalysts and E-NOgen devices have propelled NO2 - conversion, enabling on-demand NO production. This review provides an overview of NO2 - reduction pathways, with a focus on cutting-edge Fe/Cu-based E-NOgen catalysts, and explores the development of E-NOgen devices for biomedical use. Challenges and future directions for advancing E-NOgen technologies are also discussed.

Orbital Coupling of Dual-Atom Sites Boosts Electrocatalytic NO Oxidation and Dynamic Intracellular Response

In situ measurement of nitric oxide (NO) in living tissue and single cells is highly important for achieving a profound comprehension of cellular functionalities and facilitating the precise diagnosis of critical diseases; however, the progress is greatly hindered by the weak affinity of ultratrace concentration NO in cellular environment toward electrocatalysts. Herein, a new strategy is reported for precisely constructing orbital coupled dual-atomic sites to enhance the affinity between the metal atomic sites and NO on a class of N-doped hollow carbon matrix dual-atomic sites Co─Ni (Co1Ni1-NC) for greatly boosting electrocatalytic NO performance. The as-synthesized Co1Ni1-NC demonstrates a substantially higher current density than Ni1-NC and Co1-NC, coupled with exceptional stability with a negligible degradation rate of 0.6 µA·cm-2·h-1, which is the best among the state-of-the-art electrocatalysts for NO oxidation. Experimental and theoretical investigations collectively reveal that the pivotal role of d-d orbit coupling between Co and Ni sites enables Ni to acquire additional electrons, leading to the occupation of Ni's 3dxy/yz within the 2π orbitals of NO, thus weakening the N≡O triple bond and concurrently accelerating NO adsorption kinetics. It is demonstrated that Co1Ni1-NC-coated nanoelectrode can achieve the in situ sensing of NO in living organs and single cells.

In Vivo Electrochemical Biosensing Technologies for Neurochemicals: Recent Advances in Electrochemical Sensors and Devices

In vivo electrochemical sensing of neurotransmitters, neuromodulators, and metabolites plays a critical role in real-time monitoring of various physiological or psychological processes in the central nervous system. Currently, advanced electrochemical biosensors and technologies have been emerging as prominent ways to meet the surging requirements of in vivo monitoring of neurotransmitters and neuromodulators ranging from single cells to brain slices, even the entire brain. This review introduces the fundamental working principles and summarizes the achievements of in vivo electrochemical biosensing technologies including voltammetry, amperometry, potentiometry, field-effect transistor (FET), and organic electrochemical transistor (OECT). According to the elaborate feature of sensing technology, versatile strategies have been devoted to solve critical issues associated with the sensing of neurochemicals under an intricate physiological environment. Voltammetry is a universal technique to investigate electrochemical processes in complex matrices which could realize the miniaturization of electrodes, while amperometry serves as a well-suited approach offering high temporal resolution which is favorable for the fast oxidation-reduction kinetics of neurochemicals. Potentiometry realizes quantitative analysis by recording the potential difference with reduced invasiveness and high compatibility. FET and OECT serve as amplification strategies with higher sensitivity than traditional technologies. Furthermore, we point out the current shortcomings and address the challenges and perspectives of in vivo electrochemical biosensing technologies.

CO Adsorption on a Single-Atom Catalyst Stably Embedded in Graphene

Confined single metal atoms in graphene-based materials have proven to be excellent catalysts for several reactions and promising gas sensing systems. However, whether the chemical activity arises from the specific type of metal atom or is a direct consequence of the confinement itself remains unclear.

Regulation of the coordination number of Zn single atoms to boost electrochemical sensing of H2O2

Compared with transition metals with partially occupied 3d orbitals, Zn has a filled 3d10 configuration, which severely restricts electron mobility and hence usually renders Zn2+ intrinsically inactive for electrochemical sensing. Metal single-atom catalysts are a new kind of sensing material. Owing to their unique coordination structure and high atomic utilization rate, metal single-atom catalysts show unique properties, which makes them promising for use in the field of electrochemical sensing. However, whether Zn single atoms are active sites remains to be elucidated. In this study, we prepared nitrogen-doped carbon (NC) materials by pyrolyzing ZIF-8 at high temperatures and reported that when the pyrolysis temperature was 800 °C, many Zn single atoms with Zn-N4 coordination structures remained in the NC material. Even when the pyrolysis temperature is increased to 1000 °C, a small number of Zn single atoms remain, and the coordination structure changes from Zn-N4 to Zn-N3. Furthermore, unexpectedly, both residual Zn single atoms showed electrocatalytic activity for H2O2 reduction. In particular, the electrocatalytic activity was significantly enhanced after the coordination structure was changed from Zn-N4 to Zn-N3. Density functional theory (DFT) calculations indicate that the coordination structure of Zn-N3 optimizes the adsorption and desorption strength of oxygen-containing species in the electrocatalytic reaction process, which lowers the energy barrier of the rate-determining step and increases the detection sensitivity of H2O2 nearly 4.1 times. This study revealed new properties of Zn single atoms for the electrocatalytic reduction of H2O2 and developed a strategy to increase the electrocatalytic activity of metal single-atom catalysts through coordination number regulation, which lays the foundation for the use of Zn single atoms in the field of electrochemical sensing and provides ideas for the design of new highly active sensing materials.

Fe Single-Atom and Fe Cluster-Coupled N, S Co-doped Carbon Nanomaterial-Based Flexible Electrochemical Sweat Biosensor for the Real-Time Analysis of Uric Acid and Tyrosine

Fe single-atom and Fe cluster-coupled N, S co-doped carbon nanomaterials (FeSA-FeONC-NSC) were prepared through a two-step high-temperature pyrolysis process using Gelidium corneum enriched with C, Fe, O, N, and S as precursors. The analysis by aberration-corrected scanning transmission electron microscopy and X-ray absorption spectroscopy revealed the presence of single-atom Fe in Fe-N4 coordination structures, along with small clusters as Fe-O-coordinated Fe2O3. Single-atom Fe in the form of Fe2+/Fe3+ provides more electrocatalytic active sites, which synergistically accelerates the charge migration process in the assembly of FeSA-FeONC-NSC with Fe2O3 clusters. The flexible nonenzymatic sensor, based on FeSA-FeONC-NSC and fabricated using a polydimethylsiloxane substrate, exhibited excellent catalytic activity for both uric acid (UA) and tyrosine (Tyr). Low detection limits for UA (0.14 μmol L-1) and Tyr (0.03 μmol L-1) were observed by using chronoamperometry in artificial sweat. The in situ detection of sweat was performed in combination with an integrated circuit board affixed to human skin, and the results were generally consistent with those of the high-performance liquid chromatography method. Therefore, FeSA-FeONC-NSC serves as a good modifier for wearable electrochemical sweat sensor applications.

Novel interfaces for internet of wearable electrochemical sensors

The integration of wearable devices, the Internet of Things (IoT), and advanced sensing platforms implies a significant paradigm shift in technological innovations and human interactions. The IoT technology allows continuous monitoring in real time. Thus, Internet of Wearables has made remarkable strides, especially in the field of medical monitoring. IoT-enabled wearable systems assist in early disease detection that facilitates personalized interventions and proactive healthcare management, thereby empowering individuals to take charge of their wellbeing. Until now, physical sensors have been successfully integrated into wearable devices for physical activity monitoring. However, obtaining biochemical information poses challenges in the contexts of fabrication compatibility and shorter operation lifetimes. IoT-based electrochemical wearable sensors allow real-time acquisition of data and interpretation of biomolecular information corresponding to biomarkers, viruses, bacteria and metabolites, extending the diagnostic capabilities beyond physical activity tracking. Thus, critical heath parameters such as glucose levels, blood pressure and cardiac rhythm may be monitored by these devices regardless of location and time. This work presents versatile electrochemical sensing devices across different disciplines, including but not limited to sports, safety and wellbeing by using IoT. It also discusses the detection principles for biomarkers and biofluid monitoring, and their integration into devices and advancements in sensing interfaces.

A universal strategy for the synthesis of transition metal single atom catalysts toward electrochemical CO2 reduction

Herein, a pyrolysis-induced precursor transformation strategy has been proposed. Using pre-synthesized PDA-M as a precursor, the production of transition metal single atom catalysts (SACs) has been achieved, with compositional flexibility at high metal loadings. In particular, the Ni SAC sample has shown promising CO selectivity when evaluated for the electrochemical CO2 reduction reaction, reaching 29.8 mA cm-2 CO partial current density and 90.3% CO faradaic efficiency at -1.05 V vs. RHE.

Electrosynthesis of Transition Metal Coordinated Polymers for Active and Stable Oxygen Evolution

Transition metal coordination polymers (TM-CP) are promising inexpensive and flexible electrocatalysts for oxygen evolution reaction in water electrolysis, while their facile synthesis and controllable regulation remain challenging. Here we report an anodic oxidation-electrodeposition strategy for the growth of TM-CP (TM=Fe, Co, Ni, Cr, Mn; CP=polyaniline, polypyrrole) films on a variety of metal substrates that act as both catalyst supports and metal ion sources. An exemplified bimetallic NiFe-polypyrrole (NiFe-PPy) features superior mechanical stability in friction and exhibits high activity with long-term durability in alkaline seawater (over 2000 h) and anion exchange membrane electrolyzer devices at current density of 500 mA cm-2. Spectroscopic and microscopic analysis unravels the configurations with atomically distributed metal sites induced by d-π conjugation, which transforms into a mosaic structure with NiFe (oxy)hydroxides embedded in PPy matrix during oxygen evolution. The superior catalytic performance is ascribed to the anchoring effect of PPy that inhibits metal dissolution, the strong substrate-to-catalyst interaction that ensures good adhesion, and the Fe/Ni-N coordination that modulates the electronic structures to facilitate the deprotonation of *OOH intermediate. This work provides a general strategy and mechanistic insight into building robust inorganic/polymer composite electrodes for oxygen electrocatalysis.

Synergistic Elimination of Chlorophenols Using a Single-Atom Nickel with Single-Walled Carbon Nanotubes: The Roles of Adsorption, Hydrodechlorination, and the Electro-Fenton Process

Electrocatalytic degradation enables the efficient treatment of chlorinated pollutants (COPs); however, its application has been significantly hindered by the large amounts of unsafe intermediate products. In this study, we present a single-atom nickel with single-walled carbon nanotubes (SWCNTs) as an electrochemical reactor for the complete elimination of chlorophenols. Distinct products and reductive mechanisms were observed for Ni-N-C compared to Cu-N-C. Ni-N-C incorporation has a novel degradation pathway for efficient chlorophenol degradation involving hydrodechlorination and the electro-Fenton process. Most importantly, the weak adsorption between the chlorophenols and the SWCNTs promoted their dechlorination by the attached active atomic hydrogen (H*) formed on the Ni-N-C. Meanwhile, the SWCNTs improved the reduction of O2 to H2O2, which was subsequently decomposed by Ni-N-C to form hydroxyl radicals (·OH) for phenol oxidation. As a result, the degradation rate of 4-chlorophenol was increased by 5 and 10 times compared with those of the Ni-N-C and SWCNTs alone, respectively. The first-order reaction rate constant was 2.7 h-1, and the metal mass kinetics constant was 1956.5 min-1g-1. Aromatic COPs containing benzene rings could be degraded, but chloroacetic acids could not. This study demonstrates a new design for multifunctional electrochemical degradation that functions via dechlorination and the ·OH activation mechanism.

Inflammation-free electrochemical in vivo sensing of dopamine with atomic-level engineered antioxidative single-atom catalyst

Electrochemical methods with tissue-implantable microelectrodes provide an excellent platform for real-time monitoring the neurochemical dynamics in vivo due to their superior spatiotemporal resolution and high selectivity and sensitivity. Nevertheless, electrode implantation inevitably damages the brain tissue, upregulates reactive oxygen species level, and triggers neuroinflammatory response, resulting in unreliable quantification of neurochemical events. Herein, we report a multifunctional sensing platform for inflammation-free in vivo analysis with atomic-level engineered Fe single-atom catalyst that functions as both single-atom nanozyme with antioxidative activity and electrode material for dopamine oxidation. Through high-temperature pyrolysis and catalytic performance screening, we fabricate a series of Fe single-atom nanozymes with different coordination configurations and find that the Fe single-atom nanozyme with FeN4 exhibits the highest activity toward mimicking catalase and superoxide dismutase as well as eliminating hydroxyl radical, while also featuring high electrode reactivity toward dopamine oxidation. These dual functions endow the single-atom nanozyme-based sensor with anti-inflammatory capabilities, enabling accurate dopamine sensing in living male rat brain. This study provides an avenue for designing inflammation-free electrochemical sensing platforms with atomic-precision engineered single-atom catalysts.

General In Situ Engineering of Carbon-Based Materials on Carbon Fiber for In Vivo Neurochemical Sensing

Developing real-time, dynamic, and in situ analytical methods with high spatial and temporal resolutions is crucial for exploring biochemical processes in the brain. Although in vivo electrochemical methods based on carbon fiber (CF) microelectrodes are effective in monitoring neurochemical dynamics during physiological and pathological processes, complex post modification hinders large-scale productions and widespread neuroscience applications. Herein, we develop a general strategy for the in situ engineering of carbon-based materials to mass-produce functional CFs by introducing polydopamine to anchor zeolitic imidazolate frameworks as precursors, followed by one-step pyrolysis. This strategy demonstrates exceptional universality and design flexibility, overcoming complex post-modification procedures and avoiding the delamination of the modification layer. This simplifies the fabrication and integration of functional CF-based microelectrodes. Moreover, we design highly stable and selective H+, O2, and ascorbate microsensors and monitor the influence of CO2 exposure on the O2 content of the cerebral tissue during physiological and ischemia-reperfusion pathological processes.

Materials Containing Single-, Di-, Tri-, and Multi-Metal Atoms Bonded to C, N, S, P, B, and O Species as Advanced Catalysts for Energy, Sensor, and Biomedical Applications

Modifying the coordination or local environments of single-, di-, tri-, and multi-metal atom (SMA/DMA/TMA/MMA)-based materials is one of the best strategies for increasing the catalytic activities, selectivity, and long-term durability of these materials. Advanced sheet materials supported by metal atom-based materials have become a critical topic in the fields of renewable energy conversion systems, storage devices, sensors, and biomedicine owing to the maximum atom utilization efficiency, precisely located metal centers, specific electron configurations, unique reactivity, and precise chemical tunability. Several sheet materials offer excellent support for metal atom-based materials and are attractive for applications in energy, sensors, and medical research, such as in oxygen reduction, oxygen production, hydrogen generation, fuel production, selective chemical detection, and enzymatic reactions. The strong metal-metal and metal-carbon with metal-heteroatom (i.e., N, S, P, B, and O) bonds stabilize and optimize the electronic structures of the metal atoms due to strong interfacial interactions, yielding excellent catalytic activities. These materials provide excellent models for understanding the fundamental problems with multistep chemical reactions. This review summarizes the substrate structure-activity relationship of metal atom-based materials with different active sites based on experimental and theoretical data. Additionally, the new synthesis procedures, physicochemical characterizations, and energy and biomedical applications are discussed. Finally, the remaining challenges in developing efficient SMA/DMA/TMA/MMA-based materials are presented.

Highly Sensitive Ammonia Gas Sensors at Room Temperature Based on the Catalytic Mechanism of N, C Coordinated Ni Single-Atom Active Center

Significant challenges are posed by the limitations of gas sensing mechanisms for trace-level detection of ammonia (NH3). In this study, we propose to exploit single-atom catalytic activation and targeted adsorption properties to achieve highly sensitive and selective NH3 gas detection. Specifically, Ni single-atom active sites based on N, C coordination (Ni-N-C) were interfacially confined on the surface of two-dimensional (2D) MXene nanosheets (Ni-N-C/Ti3C2Tx), and a fully flexible gas sensor (MNPE-Ni-N-C/Ti3C2Tx) was integrated. The sensor demonstrates a remarkable response value to 5 ppm NH3 (27.3%), excellent selectivity for NH3, and a low theoretical detection limit of 12.1 ppb. Simulation analysis by density functional calculation reveals that the Ni single-atom center with N, C coordination exhibits specific targeted adsorption properties for NH3. Additionally, its catalytic activation effect effectively reduces the Gibbs free energy of the sensing elemental reaction, while its electronic structure promotes the spill-over effect of reactive oxygen species at the gas-solid interface. The sensor has a dual-channel sensing mechanism of both chemical and electronic sensitization, which facilitates efficient electron transfer to the 2D MXene conductive network, resulting in the formation of the NH3 gas molecule sensing signal. Furthermore, the passivation of MXene edge defects by a conjugated hydrogen bond network enhances the long-term stability of MXene-based electrodes under high humidity conditions. This work achieves highly sensitive room-temperature NH3 gas detection based on the catalytic mechanism of Ni single-atom active center with N, C coordination, which provides a novel gas sensing mechanism for room-temperature trace gas detection research.

Selecting effective eletrocatalyst from Cu single-atoms and nanoparticles for realizing highly sensitive electrochemical sensing of glucose and H2O2

Which is more suitable as a sensing material between metal single-atoms and nanoparticles? Herein, electrocatalytic behaviors of copper single-atoms (Cu SAs) and copper nanoparticles (CuNPs) toward H2O2 reduction and glucose oxidation were studied. Surprisingly, the electrocatalytic activity of Cu SAs and CuNPs showed significant differences in H2O2 reduction and glucose oxidation. Compared with CuNPs, Cu SAs exhibit outstanding activity in the electrocatalytic reduction of H2O2 but exhibit weak activity in the electrocatalytic oxidation of glucose. On the contrary, CuNPs exhibit excellent activity in the electrochemical oxidation of glucose but have very weak electrocatalytic activity towards H2O2 reduction. DFT results show that H2O2 reduction is more favourable with Cu SAs; however, the electrochemical oxidation of glucose with CuNPs requires overcoming much lower energy barriers than that with Cu SAs. This study proves that both metal single-atoms and nanoparticles are not omnipotent, which provides ideas for constructing highly active sensing materials.

[2+1] Cycloadditions Modulate the Hydrophobicity of Ni-N4 Single-Atom Catalysts for Efficient CO2 Electroreduction

Microenvironment regulation of M-N4 single-atom catalysts (SACs) is a promising way to tune their catalytic properties toward the electrochemical CO2 reduction reaction. However, strategies that can effectively introduce functional groups around the M-N4 sites through strong covalent bonding and under mild reaction conditions are highly desired. Taking the hydrophilic Ni-N4 SAC as a representative, we report herein a [2+1] cycloaddition reaction between Ni-N4 and in situ generated difluorocarbene (F2C:), and enable the surface fluorocarbonation of Ni-N4, resulting in the formation of a super-hydrophobic Ni-N4-CF2 catalyst. Meanwhile, the mild reaction conditions allow Ni-N4-CF2 to inherit both the electronic and structural configuration of the Ni-N4 sites from Ni-N4. Enhanced electrochemical CO2-to-CO Faradaic efficiency above 98 % is achieved in a wide operating potential window from -0.7 V to -1.3 V over Ni-N4-CF2. In situ spectroelectrochemical studies reveal that a highly hydrophobic microenvironment formed by the -CF2- group repels asymmetric H-bonded water at the electrified interface, inhibiting the hydrogen evolution reaction and promoting CO production. This work highlights the advantages of [2+1] cycloaddition reactions on the covalent modification of N-doped carbon-supported catalysts.

Ni Single Atom Decorated Porous Hollow Carbon Nanosphere-Based Electrodes for High Performance Symmetric Solid-State Supercapacitors

Ni single atom containing hollow carbon nanospheres with nitrogen doping has been synthesized by carbonization of Ni(NO3)2/phloroglucinol-formaldehyde polymer/silica composite. The samples have been characterized by powder X-ray diffraction, nitrogen adsorption/desorption, electron microscopic, Raman and X-ray photoelectron spectroscopic studies. The microstructure and surface area vary with the amount of Ni(NO3)2 employed in the syntheses and the carbonization environment. An optimized amount of nickel and argon as the carbonization gas afford Ni-1.0@N@HCN-Ar which possesses overall superior features. The uniformly dispersed Ni single atoms within the hollow porous carbon framework fully utilize all the electroactive sites thereby improving the supercapacitive performance. The specific capacitance of Ni-1.0@N@HCN-Ar reaches 777 F g-1 at 1 A g-1 with a Coulombic efficiency of 98.4 % and excellent recyclability. The energy and power density of Ni-1.0@N@HCN-Ar are found to be high; at 1 A g-1 its energy density is 155.4 Wh kg-1 with a power density of 600.3 W kg-1. At a high current density of 10 A g-1 the material shows a high energy density of 118.4 Wh kg-1 with excellent power density of 6003.4 W kg-1. A symmetric solid-state supercapacitor assembled with this material, Ni-1.0@N@HCN-Ar//Ni-1.0@N@HCN-Ar using H2SO4/PVA gel electrolyte shows a superior energy density value of 30 Wh kg-1 at a power density of 1200 W kg-1.

Boosting Electrochemiluminescence Performance of a Dual-Active Site Iron Single-Atom Catalyst-Based Luminol-Dissolved Oxygen System via Plasmon-Induced Hot Holes

Due to the commonly low content of biomarkers in diseases, increasing the sensitivity of electrochemiluminescence (ECL) systems is of great significance for in vitro ECL diagnosis and biodetection. Although dissolved O2 (DO) has recently been considered superior to H2O2 as a coreactant in the most widely used luminol ECL systems owing to its improved stability and less biotoxicity, it still has unsatisfactory ECL performance because of its ultralow reactivity. In this study, an effective plasmonic luminol-DO ECL system has been developed by complexing luminol-capped Ag nanoparticles (AgNPs) with plasma-treated Fe single-atom catalysts (Fe-SACs) embedded in graphitic carbon nitride (g-CN) (pFe-g-CN). Under optimal conditions, the performance of the resulting ECL system could be markedly increased up to 1300-fold compared to the traditional luminol-DO system. Further investigations revealed that duple binding sites of pFe-g-CN and plasmonically induced hot holes that disseminated from AgNPs to g-CN surfaces lead to facilitate significantly the luminous reaction process of the system. The proposed luminol-DO ECL system was further employed for the stable and ultrasensitive detection of prostate-specific antigen in a wide linear range of 1.0 fg/mL to 1 μg/mL, with a pretty low limit of detection of 0.183 fg/mL.

Single-Atom-Based Nanoenzyme in Tissue Repair

Since the discovery of ferromagnetic nanoparticles Fe3O4 that exhibit enzyme-like activity in 2007, the research on nanoenzymes has made significant progress. With the in-depth study of various nanoenzymes and the rapid development of related nanotechnology, nanoenzymes have emerged as a promising alternative to natural enzymes. Within nanozymes, there is a category of metal-based single-atom nanozymes that has been rapidly developed due to low cast, convenient preparation, long storage, less immunogenicity, and especially higher efficiency. More importantly, single-atom nanozymes possess the capacity to scavenge reactive oxygen species through various mechanisms, which is beneficial in the tissue repair process. Herein, this paper systemically highlights the types of metal single-atom nanozymes, their catalytic mechanisms, and their recent applications in tissue repair. The existing challenges are identified and the prospects of future research on nanozymes composed of metallic nanomaterials are proposed. We hope this review will illuminate the potential of single-atom nanozymes in tissue repair, encouraging their sequential clinical translation.

Bioinspired Gas Manipulation for Regulating Multiphase Interactions in Electrochemistry

The manipulation of gas in multiphase interactions plays a crucial role in various electrochemical processes. Inspired by nature, researchers have explored bioinspired strategies for regulating these interactions, leading to remarkable advancements in design, mechanism, and applications. This paper provides a comprehensive overview of bioinspired gas manipulation in electrochemistry. It traces the evolution of gas manipulation in gas-involving electrochemical reactions, highlighting the key milestones and breakthroughs achieved thus far. The paper then delves into the design principles and underlying mechanisms of superaerophobic and (super)aerophilic electrodes, as well as asymmetric electrodes. Furthermore, the applications of bioinspired gas manipulation in hydrogen evolution reaction (HER), carbon dioxide reduction reaction (CO2RR), and other gas-involving electrochemical reactions are summarized. The promising prospects and future directions in advancing multiphase interactions through gas manipulation are also discussed.

Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single Atom Sites on Carbon Nitride for Selective Photooxidation of Methane into Methanol

Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer-Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.

Wearable electrochemical patch based on iron nano-catalysts incorporated laser-induced graphene for sweat metabolites detection

The development of wearable devices shows great application potential in health management. In this work, we propose the fabrication of a novel wearable electrochemical patch and prove its application in sweat metabolites detection. The patch is developed based on iron nano-catalysts incorporated laser-induced graphene (FeNCs/LIG), which is a newly integrated sensing electrode with unique three-dimensional nanostructure and good electrocatalytic activity. It shows desirable sensing performances for sweat metabolites including tyrosine (Tyr) and uric acid (UA) molecules. The detection limit of Tyr and UA can reach 5.11 μM and 1.37 μM, respectively. Besides, density functional theory calculation deeply reveals that the Fe active sites of FeNCs play an important role in molecule adsorption and electron transference, thus promoting sensing performance. To realize wearable application, a dual-channel hydrogel chip is designed and assembled with FeNCs/LIG. The developed patch is successfully utilized to accurately determination of Tyr and UA in sweat. This work is expected to provide a new non-invasive strategy for evaluating amino acid intake and metabolic level.

Real-Time Quantification of Nanoplastics-Induced Oxidative Stress in Stretching Alveolar Cells

Nanoplastics from air pollutants can be directly inhaled into the alveoli in the lungs and further enter blood circulation, and numerous studies have revealed the close relation between internalized nanoplastics with many physiological disorders via intracellular oxidative stress. However, the dynamic process of nanoplastics-induced oxidative stress in lung cells under breath-mimicked conditions is still unclear, due to the lack of methods that can reproduce the mechanical stretching of the alveolar and simultaneously monitor the oxidative stress response. Here, we describe a biomimetic platform by culturing alveoli epithelial cells on a stretchable electrochemical sensor and integrating them into a microfluidic device. This allows reproducing the respiration of alveoli by cyclic stretching of the alveoli epithelial cells and monitoring the nanoplastics-induced oxidative stress by the built-in sensor. By this device, we prove that cyclic stretches can greatly enhance the cellular uptake of nanoplastics with the dependencies of strain amplitude. Importantly, oxidative stress evoked by internalized nanoplastics can be quantitatively monitored in real time. This work will promote the deep understanding about the cytotoxicity of inhaled nanoplastics in the pulmonary mechanical microenvironment.

Chemically Tailored Single Atoms for Targeted and Light-Controlled Bactericidal Activity

Single-atom (SA) nanoparticles exhibit considerable potential in terms of photothermal properties for bactericidal applications. Nevertheless, the restricted efficacy of their targeted and controlled antibacterial activity has hindered their practical implementation. This study aims to overcome this obstacle by employing chemical modifications to tailor SAs, thereby achieving targeted and light-controlled antimicrobial effects. By conducting atomic-level modifications on palladium SAs using glutathione (GSH) and mercaptophenylboronic acid (MBA), their superior targeted binding capabilities toward Escherichia coli cells are demonstrated, surpassing those of SAs modified with cysteine (Cys). Moreover, these modified SAs effectively inhibit wound bacteria proliferation and promote wound healing in rats, without inducing noticeable toxicity to major organs under 808 nm laser irradiation. This study highlights the significance of chemical engineering in tailoring the antibacterial properties of SA nanoparticles, opening avenues for combating bacterial infections and advancing nanoparticle-based therapies.

Formulating N-Doped Carbon Hollow Nanospheres with Highly Accessible Through-Pores to Isolate Fe Single-Atoms for Efficient Oxygen Reduction

It is challenging yet promising to design highly accessible N-doped carbon skeletons to fully expose the active sites inside single-atom catalysts. Herein, mesoporous N-doped carbon hollow spheres with regulatable through-pore size can be formulated by a simple sequential synthesis procedure, in which the condensed SiO2 is acted as removable dual-templates to produce both hollow interiors and through-pores, meanwhile, the co-condensed polydopamine shell is served as N-doped carbon precursor. After that, Fe─N─C hollow spheres (HSs) with highly accessible active sites can be obtained after rationally implanting Fe single-atoms. Microstructural analysis and X-ray absorption fine structure analysis reveal that high-density Fe─N4 active sites together with tiny Fe clusters are uniformly distributed on the mesoporous carbon skeleton with abundant through-pores. Benefitted from the highly accessible Fe─N4 active sites arising from the unique through-pore architecture, the Fe─N─C HSs demonstrate excellent oxygen reduction reaction (ORR) performance in alkaline media with a half-wave potential up to 0.90 V versus RHE and remarkable stability, both exceeding the commercial Pt/C. When employing Fe─N─C HSs as the air-cathode catalysts, the assembled Zn-air batteries deliver a high peak power density of 204 mW cm-2 and stable discharging voltage plateau over 140 h.

Correlating Single-Atomic Ruthenium Interdistance with Long-Range Interaction Boosts Hydrogen Evolution Reaction Kinetics

Correlated single-atom catalysts (c-SACs) with tailored intersite metal-metal interactions are superior to conventional catalysts with isolated metal sites. However, precise quantification of the single-atomic interdistance (SAD) in c-SACs is not yet achieved, which is essential for a crucial understanding and remarkable improvement of the correlated metal-site-governed catalytic reaction kinetics. Here, three Ru c-SACs are fabricated with precise SAD using a planar organometallic molecular design and π-π molecule-carbon nanotube confinement. This strategy results in graded SAD from 2.4 to 9.3 Å in the Ru c-SACs, wherein tailoring the Ru SAD into 7.0 Å generates an exceptionally high turnover frequency of 17.92 H2 s-1 and a remarkable mass activity of 100.4 A mg-1 under 50 and 100 mV overpotentials, respectively, which is superior to all the Ru-based catalysts reported previously. Furthermore, density functional theory calculations confirm that Ru SAD has a negative correlation with its d-band center owing to the long-range interactions induced by distinct local atomic geometries, resulting in an appropriate electrostatic potential and the highest catalytic activity on c-SACs with 7.0 Å Ru SAD. The present study promises an attractive methodology for experimentally quantifying the metal SAD to provide valuable insights into the catalytic mechanism of c-SACs.

NLISA versus enzyme-linked immunosorbent assay: Nanozyme-linked immunosorbent array based on platinum sub-nanocluster nanozyme for α-fetoprotein detection

Rapid and accurate identification of tumor metabolic markers is important for early tumor diagnosis and individualized treatment. Here, a stable monodisperse sub-nanometer platinum (Pt) material was developed as a highly efficient nanozyme with a specific activity of peroxidase as high as 20.86 U mg-1 through the growth of in situ domain-limited Pt quantum dots via the polymer polyvinylpyrrolidone. Further, the synthesis of large quantities of Pt-loaded SiO2 (Pt-SiO2 ) was determined by silylation reaction and used for naked eye colorimetric testing of human alpha-fetoprotein (AFP). In particular, the immunization incubation process occurred in preprepared microplates. A nanozyme-based immunomodel was constructed in the presence of the target AFP, and a chromogenic reaction occurred with exogenous hydrogen peroxide and the chromogenic substrate tetramethylbenzidine. On optimization of experimental conditions, the dynamic working response range for AFP was found to be 0.05-20 ng mL-1 , with a limit of detection of 38.7 pg mL-1 . This work provides a new strategy to design efficient nanozyme-based enzyme-linked immunochromatographic platforms to meet the practical use of replacing natural enzymes.

Nickel Single-Atom Catalyst Boosts Electrochemiluminescence of Graphitic Carbon Nitride for Sensitive Detection of HBV DNA

Owing to excellent catalytic activity, single-atom catalysts (SACs) have recently attracted considerable research interest in the electrochemiluminescence (ECL) field. However, the applications of SACs are mostly limited to conventional luminol ECL system. Hence, it is necessary to explore the application of SACs in more ECL systems. In this work, nickel single-atom catalysts (Ni SACs) were successfully applied in the graphitic carbon nitride (g-C3N4)-H2O2 ECL system to significantly enhance its cathodic emission. Notably, g-C3N4 acted not only as an ECL luminophore but also as a support to anchor Ni SACs. Ni SACs can significantly activate H2O2 to produce abundant OH• radicals for enhancing the cathodic ECL emission of g-C3N4. Ni SACs-anchored g-C3N4 (Ni SACs@g-C3N4) had a 10-fold enhanced ECL intensity as compared to g-C3N4. Finally, the Ni SACs@g-C3N4-H2O2 ECL system was developed to detect hepatitis B virus (HBV) DNA by incorporating an entropy-driven DNA walking machine-assisted CRISPR-Cas12a amplification strategy. The constructed biosensor exhibited excellent detection performance for HBV DNA with a limit of detection as low as 17 aM. This work puts forward a new idea for enhancing the cathodic ECL of g-C3N4-H2O2 and expands the application of SACs in the ECL system.

Vasculature-on-a-Chip with a Porous Membrane Electrode for In Situ Electrochemical Detection of Nitric Oxide Released from Endothelial Cells

Vasculature-on-a-chip is a microfluidic cell culture device used for modeling vascular functions by culturing endothelial cells. Porous membranes are widely used to create cell culture environments. However, in situ real-time measurements of cellular metabolites in microchannels are challenging. In this study, a novel microfluidic device with a porous membrane electrode was developed for the in situ monitoring of nitric oxide (NO) released by endothelial cells in real time. In this system, a porous Au membrane electrode was placed directly beneath the cells for in situ and real-time measurements of NO, a biomarker of endothelial cells. First, the device was electrochemically characterized to construct a calibration plot for NO. Next, NO released by human umbilical vein endothelial cells under l-arginine stimulation was successfully quantified. Furthermore, the changes in NO release with culture time (in days) using the same sample were successfully recorded by exploiting minimally invasive measurements. This is the first report on the combination of a microfluidic device and porous membrane electrode for the electrochemical analysis of endothelial cells. This device will contribute to the development of organ-on-a-chip technology for real-time in situ cell analyses.

An emerging direction for nanozyme design: from single-atom to dual-atomic-site catalysts

Nanozymes, a new class of functional nanomaterials with enzyme-like characteristics, have recently made great achievements and have become potential substitutes for natural enzymes. In particular, single-atomic nanozymes (Sazymes) have received intense research focus on account of their versatile enzyme-like performances and well-defined spatial configurations of single-atomic sites. More recently, dual-atomic-site catalysts (DACs) containing two neighboring single-atomic sites have been explored as next-generation nanozymes, thanks to the flexibility in tuning active sites by various combinations of two single-atomic sites. This minireview outlines the research progress of DACs in their synthetic approaches and the latest characterization techniques highlighting a series of representative examples of DAC-based nanozymes. In the final remarks, we provide current challenges and perspectives for developing DAC-based nanozymes as a guide for researchers who would be interested in this exciting field.

Single-Fe-Atom Catalyst for Sensitive Electrochemical Detection of Caffeic Acid

A single-atom catalyst (Fe SAs/-N-C) with excellent stability and conductivity was strategically fabricated via high-temperature calcination using the NiFe layered double hydroxide (LDH)/ZIF-8 composite as precursors. With the help of Ni as a catalyst, a great number of carbon nanotubes were produced whereby the isolated carbon bulks were interconnected to form an "island-bridge"-like 3D network structure, which greatly enhanced the exposure of active sites and the electron transfer. Accordingly, caffeic acid (CA) with versatile biological and pharmacological activities was chosen as the model analyte. The Fe SAs/-N-C with Fe-N4 as the catalytic active site was employed to establish the electrochemical sensing of CA with satisfactory sensitivity, selectivity, and long-term stability. This work expands the application range of single-atom catalysts and contributes a significant reference for the synthesis of hybrid double-atom catalysts.

An Fe-organic framework/arginine-glycine-aspartate peptide-modified sensor for electrochemically detecting nitric oxide released from living cells

Nitric oxide (NO) is a crucial cell-signaling molecule utilized in numerous physiological and pathological processes. Monitoring cellular levels of NO requires a sensor with sufficient sensitivity, transient recording capability, and biocompatibility. Owing to the large surface area and high catalytic activity of the metal-organic framework, Fe-BTC was used for the modification of screen-printed electrodes (SPEs). This study investigates the electrochemical sensing of NO on modified SPEs. Additionally, the introduction of a cell-adhesive molecule, arginine-glycine-aspartate peptide (RGD), considerably improved the cytocompatibility, resulting in superior cell attachment and growth on the SPE. The Fe-BTC/RGD-modified SPE (Fe-BTC/RGD/SPE) exhibited electrocatalytic NO oxidation at 0.8 V, demonstrating a linear response with a detection limit of 11.88 nM over a wide concentration range (0.17-47.37 μM) and a response time of approximately 0.9 s. Subsequently, the as-obtained Fe-BTC/RGD/SPE was successfully utilized for the real-time detection of NO released from human endothelial cells cultured on the electrode. Therefore, the study undertaken shows remarkable potential of Fe-BTC/RGD/SPE for practical applications in biological processes and clinical diagnostics.

Cu single-atom catalyst-based flexible hydrogen peroxide electrochemical sensor with oxygen resistance for monitoring ROS bursts

The study of cellular responses linked to oxidative stress mechanisms is crucial in comprehending diverse physiological and pathological life processes, including mitochondrial dysfunction. Nonetheless, despite the interference of O2, the monitoring of ROS released from cells poses a challenging task. In this study, carbon-based copper single-atom catalysts (Cu SACs) were synthesized that exhibits excellent electrocatalytic performance for H2O2 reduction with an initial potential at 0.23 V and effectively avoids interference from O2. Based on this catalyst, a flexible and stretchable oxygen-tolerant sensor was constructed and applied to monitor the calcium ion-induced ROS burst in human umbilical vein endothelial cells (HUVECs) in a simulated physiological condition. This study effectively eradicates interference that may arise from the reduction of O2 and presents a dependable platform for real-time in situ monitoring of physiologically active molecules by utilizing H2O2 detection.

Current Advances of Atomically Dispersed Metal-Centered Nanozymes for Tumor Diagnosis and Therapy

Nanozymes, which combine enzyme-like catalytic activity and the biological properties of nanomaterials, have been widely used in biomedical fields. Single-atom nanozymes (SANs) with atomically dispersed metal centers exhibit excellent biological catalytic activity due to the maximization of atomic utilization efficiency, unique metal coordination structures, and metal-support interaction, and their structure-activity relationship can also be clearly investigated. Therefore, they have become an emerging alternative to natural enzymes. This review summarizes the examples of nanocatalytic therapy based on SANs in tumor diagnosis and treatment in recent years, providing an overview of material classification, activity modulation, and therapeutic means. Next, we will delve into the therapeutic mechanism of SNAs in the tumor microenvironment and the advantages of synergistic multiple therapeutic modalities (e.g., chemodynamic therapy, sonodynamic therapy, photothermal therapy, chemotherapy, photodynamic therapy, sonothermal therapy, and gas therapy). Finally, this review proposes the main challenges and prospects for the future development of SANs in cancer diagnosis and therapy.

2D Materials Beyond Post-AI Era: Smart Fibers, Soft Robotics, and Single Atom Catalysts

Recent consecutive discoveries of various 2D materials have triggered significant scientific and technological interests owing to their exceptional material properties, originally stemming from 2D confined geometry. Ever-expanding library of 2D materials can provide ideal solutions to critical challenges facing in current technological trend of the fourth industrial revolution. Moreover, chemical modification of 2D materials to customize their physical/chemical properties can satisfy the broad spectrum of different specific requirements across diverse application areas. This review focuses on three particular emerging application areas of 2D materials: smart fibers, soft robotics, and single atom catalysts (SACs), which hold immense potentials for academic and technological advancements in the post-artificial intelligence (AI) era. Smart fibers showcase unconventional functionalities including healthcare/environmental monitoring, energy storage/harvesting, and antipathogenic protection in the forms of wearable fibers and textiles. Soft robotics aligns with future trend to overcome longstanding limitations of hard-material based mechanics by introducing soft actuators and sensors. SACs are widely useful in energy storage/conversion and environmental management, principally contributing to low carbon footprint for sustainable post-AI era. Significance and unique values of 2D materials in these emerging applications are highlighted, where the research group has devoted research efforts for more than a decade.

Bioinspired CuZn-N/C Single-Atom Nanozyme with High Substrate Specificity for Selective Online Monitoring of Epinephrine in Living Brain

Though many elegant laccase mimics have emerged, these mimics generally have no substrate selectivity as well as low activity, making it difficult to fulfill the demand for monitoring in physiological conditions. Herein, inspired by the Cu-N ligand structure in the active site of natural laccase, we revealed that a carbon nanomaterial with atomically dispersed Cu and Zn atoms (CuZn-N/C) and a well-defined ligand structure could function as an effective laccase mimic for selectively catalyzing epinephrine (EP) oxidation. Catalytic activity of the CuZn-N/C nanozyme was superior to those of Cu-N/C and Zn-N/C and featured a Km value nearly 3-fold lower than that of natural laccase, which indicated that CuZn-N/C has a better affinity for EP. Density functional theory (DFT) revealed the mechanism of the superior catalytic ability of dual-metal CuZn-N/C as follows: (1) the exact distance of the two metal atoms in the CuZn-N/C catalyst makes it suitable for adsorption of the EP molecule, and the CuZn-N/C catalyst can offer the second hydrogen bond that stabilizes the adsorption; (2) molecular orbitals and density of states indicate that the strong interaction between the EP molecule and CuZn-N/C is important for EP catalytic oxidization. Furthermore, a sensitive and selective online optical detection platform (OODP) is constructed for determining EP with a low limit of detection (LOD) of 0.235 μM and a linear range of 0.2-20 μM. The system allows real-time measurement of EP release in the rat brain in vivo following ischemia with dexmedetomidine administration. This work not only provides an idea of designing efficient laccase mimics but also builds a promising chemical platform for better understanding EP-related drug action for ischemic cerebrovascular illnesses and opens up possibilities to explore brain function.

Three-Dimensional Stretchable Sensor-Hydrogel Integrated Platform for Cardiomyocyte Culture and Mechanotransduction Monitoring

Cardiomyocytes are responsible for generating contractile force to pump blood throughout the body and are very sensitive to mechanical forces and can initiate mechano-electric coupling and mechano-chemo-transduction. Remarkable progress has been made in constructing heart tissue by engineered three-dimensional (3D) culture models and in recording the electrical signals of cardiomyocytes. However, it remains a severe challenge for real-time acquiring of the transient biochemical information in cardiomyocyte mechano-chemo-transduction. Herein, we reported a multifunctional platform by integrating a 3D stretchable electrochemical sensor with collagen hydrogel for the culture, electrical stimulation, and electrochemical monitoring of cardiomyocytes. The 3D stretchable electrochemical sensor was prepared by assembling functionalized conductive polymer PEDOT:PSS on an elastic scaffold, which showed excellent electrochemical sensing performance and stability under mechanical deformations. The integration of a 3D stretchable electrochemical sensor with collagen hydrogel provided an in vivo-like microenvironment for cardiomyocyte culture and promoted cell orientation via in situ electrical stimulation. Furthermore, this multifunctional platform allowed real-time monitoring of stretch-induced H2O2 release from cardiomyocytes under their normal and pathological conditions, as well as pharmacological interventions.

Flexible and Stretchable Electrochemical Sensors for Biological Monitoring

The rise of flexible and stretchable electronics has revolutionized biosensor techniques for probing biological systems. Particularly, flexible and stretchable electrochemical sensors (FSECSs) enable the in situ quantification of numerous biochemical molecules in different biological entities owing to their exceptional sensitivity, fast response, and easy miniaturization. Over the past decade, the fabrication and application of FSECSs have significantly progressed. This review highlights key developments in electrode fabrication and FSECSs functionalization. It delves into the electrochemical sensing of various biomarkers, including metabolites, electrolytes, signaling molecules, and neurotransmitters from biological systems, encompassing the outer epidermis, tissues/organs in vitro and in vivo, and living cells. Finally, considering electrode preparation and biological applications, current challenges and future opportunities for FSECSs are discussed.

Nanofiber-based Stretchable Electrodes for Oriented Culture and Mechanotransduction Monitoring of Smooth Muscle Cells

Vascular smooth muscle cells (SMCs) are circumferentially oriented perpendicular to the blood vessel and maintain the contractile phenotype in physiological conditions. They can sense the mechanical forces of blood vessels expanding and contracting and convert them into biochemical signals to regulate vascular homeostasis. However, the real-time monitoring of mechanically evoked biochemical response while maintaining SMC oriented growth remains an important challenge. Herein, we developed a stretchable electrochemical sensor by electrospinning aligned and elastic polyurethane (PU) nanofibers on the surface of PDMS film and further modification of conductive polymer PEDOT:PSS-LiTFSI-CoPc (PPLC) on the nanofibers (denoted as PPLC/PU/PDMS). The aligned nanofibers on the electrode surface could guide the oriented growth of SMCs and maintain the contractile phenotype, and the modification of PPLC endowed the electrode with good electrochemical sensing performance and stability under mechanical deformation. By culturing cells on the electrode surface, the oriented growth of SMCs and real-time monitoring of stretch-induced H2O2 release were achieved. On this basis, the changes of H2O2 level released by SMCs under the pathology (hypertension) and intervention of natural product resveratrol were quantitatively monitored, which will be helpful to further understand the occurrence and development of vascular-related diseases and the mechanisms of pharmaceutical intervention.

Coordination Engineering of Dual Co, Ni Active Sites in N-Doped Carbon Fostering Reversible Oxygen Electrocatalysis

The development of affordable and non-noble-metal-based reversible oxygen electrocatalysts is required for renewable energy conversion and storage systems like metal-air batteries (MABs). However, the nonbifunctionality of most of the catalysts impedes their use in rechargeable MAB applications. Moreover, the loss of active sites also affects the long-term performance of the electrocatalyst toward oxygen electrocatalysis. In this work, we report a simplistic yet controllable chemical approach for the synthesis of dual transitional metals such as cobalt, nickel, and nitrogen-doped carbon (CoNi-NC) as bifunctional electrode materials for rechargeable zinc-air batteries (ZABs). The spatially isolated Ni-N4 and Co-N4 active units were rendered for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), respectively. The individual efficacy of both reversible reactions enables an ΔE value of ∼0.72 V, which outperforms several bifunctional electrocatalysts reported in the literature. The half-wave potential (E1/2) and overpotential were achieved at 0.83 V and 330 mV (vs RHE) for ORR and OER, respectively. The peak power density of ZAB equipped with the CoNi-NC catalyst was calculated to be 194 mW cm-2. The present strategy for the synthesis of bifunctional electrocatalysts with dual active sites offers prospects for developing electrochemical energy storage and conversion systems.

In situ growth of a cobalt porphyrin-based covalent organic framework on multi-walled carbon nanotubes for ultrasensitive real-time monitoring of living cell-released nitric oxide

Nitric oxide (NO), as a critical transcellular messenger, participates in a variety of physiological and pathological processes. However, its real-time detection still faces challenges due to its short half-life and trace amounts. Here, MWCNTs@COF-366-Co was prepared by in situ growth of a cobalt porphyrin-based covalent organic framework (COF-366-Co) on multi-walled carbon nanotubes (MWCNTs), and a unique biosensing platform for ultrasensitive real-time NO determination was established. Remarkably, MWCNTs@COF-366-Co contains plenty of atomically arranged M-N4 active sites for electrocatalysis, which provides more efficient electron transfer pathways and resolves the random arrangement issue of active sites. COF-366-Co with a high surface area contains a large number of exposed active M-N4 sites, providing faster NO transport/diffusion and more efficient electron transfer pathways. Due to the synergy of atomic-level periodic structural features of COF-366-Co and high conductivity of MWCNTs, the MWCNTs@COF-366-Co electrochemical biosensor exhibited excellent NO determination performance in a wide range from 0.09 to 400 μM, with high sensitivity (8.9 μA μM-1 cm-2) and a low limit of detection (16 nM). Moreover, the biosensor has been successfully used to sensitively monitor NO molecules released from human umbilical vein endothelial cells (HUVECs). This research not only designed a multifunctional intelligent biosensor platform, but also provided a broad prospect for continuous dynamic monitoring of the activity of living cells and their released metabolites.

Tracking the Evolution of Single-Atom Catalysts for the CO2 Electrocatalytic Reduction Using Operando X-ray Absorption Spectroscopy and Machine Learning

Transition metal-nitrogen-doped carbons (TMNCs) are a promising class of catalysts for the CO2 electrochemical reduction reaction. In particular, high CO2-to-CO conversion activities and selectivities were demonstrated for Ni-based TMNCs. Nonetheless, open questions remain about the nature, stability, and evolution of the Ni active sites during the reaction. In this work, we address this issue by combining operando X-ray absorption spectroscopy with advanced data analysis. In particular, we show that the combination of unsupervised and supervised machine learning approaches is able to decipher the X-ray absorption near edge structure (XANES) of the TMNCs, disentangling the contributions of different metal sites coexisting in the working TMNC catalyst. Moreover, quantitative structural information about the local environment of active species, including their interaction with adsorbates, has been obtained, shedding light on the complex dynamic mechanism of the CO2 electroreduction.

Fe/Cu diatomic catalysts for electrochemical nitrate reduction to ammonia

Electrochemical conversion of nitrate to ammonia offers an efficient approach to reducing nitrate pollutants and a potential technology for low-temperature and low-pressure ammonia synthesis. However, the process is limited by multiple competing reactions and NO₃^- adsorption on cathode surfaces. Here, we report a Fe/Cu diatomic catalyst on holey nitrogen-doped graphene which exhibits high catalytic activities and selectivity for ammonia production. The catalyst enables a maximum ammonia Faradaic efficiency of 92.51% (-0.3 V(RHE)) and a high NH₃ yield rate of 1.08 mmol h^-1 mg^-1 (at - 0.5 V(RHE)). Computational and theoretical analysis reveals that a relatively strong interaction between NO₃^- and Fe/Cu promotes the adsorption and discharge of NO₃^- anions. Nitrogen-oxygen bonds are also shown to be weakened due to the existence of hetero-atomic dual sites which lowers the overall reaction barriers. The dual-site and hetero-atom strategy in this work provides a flexible design for further catalyst development and expands the electrocatalytic techniques for nitrate reduction and ammonia synthesis.