Operando optical tracking of single-particle ion dynamics in batteries

Role of grain-level chemo-mechanics in composite cathode degradation of solid-state lithium batteries

Solid-state Li-ion batteries, based on Ni-rich oxide cathodes and Li-metal anodes, can theoretically reach a high specific energy of 393 Wh kg-1 and hold promise for electrochemical storage. However, Li intercalation-induced dimensional changes can lead to crystal defect formation in these cathodes, and contact mechanics problems between cathode and solid electrolyte. Understanding the interplay between cathode microstructure, operating conditions, micromechanics of battery materials, and capacity decay remains a challenge. Here, we present a microstructure-sensitive chemo-mechanical model to study the impact of grain-level chemo-mechanics on the degradation of composite cathodes. We reveal that crystalline anisotropy, state-of-charge-dependent Li diffusion rates, and lattice dimension changes drive dislocation formation in cathodes and contact loss at the cathode/electrolyte interface. These dislocations induce large lattice strain and trigger oxygen loss and structural degradation preferentially near the surface area of cathode particles. Moreover, contact loss is caused by the micromechanics resulting from the crystalline anisotropy of cathodes and the mechanical properties of solid electrolytes, not just operating conditions. These findings highlight the significance of grain-level cathode microstructures in causing cracking, formation of crystal defects, and chemo-mechanical degradation of solid-state batteries.

Photoredox phase engineering of transition metal dichalcogenides

Crystallographic phase engineering plays an important part in the precise control of the physical and electronic properties of materials. In two-dimensional transition metal dichalcogenides (2D TMDs), phase engineering using chemical lithiation with the organometallization agent n-butyllithium (n-BuLi), to convert the semiconducting 2H (trigonal) to the metallic 1T (octahedral) phase, has been widely explored for applications in areas such as transistors, catalysis and batteries1-15. Although this chemical phase engineering can be performed at ambient temperatures and pressures, the underlying mechanisms are poorly understood, and the use of n-BuLi raises notable safety concerns. Here we optically visualize the archetypical phase transition from the 2H to the 1T phase in mono- and bilayer 2D TMDs and discover that this reaction can be accelerated by up to six orders of magnitude using low-power illumination at 455 nm. We identify that the above-gap illumination improves the rate-limiting charge-transfer kinetics through a photoredox process. We use this method to achieve rapid and high-quality phase engineering of TMDs and demonstrate that this methodology can be harnessed to inscribe arbitrary phase patterns with diffraction-limited edge resolution into few-layer TMDs. Finally, we replace pyrophoric n-BuLi with safer polycyclic aromatic organolithiation agents and show that their performance exceeds that of n-BuLi as a phase transition agent. Our work opens opportunities for exploring the in situ characterization of electrochemical processes and paves the way for sustainably scaling up materials and devices by photoredox phase engineering.

In-plane staging in lithium-ion intercalation of bilayer graphene

The ongoing efforts to optimize rechargeable Li-ion batteries led to the interest in intercalation of nanoscale layered compounds, including bilayer graphene. Its lithium intercalation has been demonstrated recently but the mechanisms underpinning the storage capacity remain poorly understood. Here, using magnetotransport measurements, we report in-operando intercalation dynamics of bilayer graphene. Unexpectedly, we find four distinct intercalation stages that correspond to well-defined Li-ion densities. Transitions between the stages occur rapidly (within 1 sec) over the entire device area. We refer to these stages as 'in-plane', with no in-plane analogues in bulk graphite. The fully intercalated bilayers represent a stoichiometric compound C14LiC14 with a Li density of ∼2.7·1014 cm-2, notably lower than fully intercalated graphite. Combining the experimental findings and DFT calculations, we show that the critical step in bilayer intercalation is a transition from AB to AA stacking which occurs at a density of ∼0.9·1014 cm-2. Our findings reveal the mechanism and limits for electrochemical intercalation of bilayer graphene and suggest possible avenues for increasing the Li storage capacity.

Unlocking Single Particle Anisotropy in Real-Time for Photoelectrochemistry Processes at the Nanoscale

The key to rationally and rapidly designing high-performance materials is the monitoring and comprehension of dynamic processes within individual particles in real-time, particularly to gain insight into the anisotropy of nanoparticles. The intrinsic property of nanoparticles typically varies from one crystal facet to the next under realistic working conditions. Here, we introduce the operando collision electrochemistry to resolve the single silver nanoprisms (Ag NPs) anisotropy in photoelectrochemistry. We directly identify the effect of anisotropy on the plasmonic-assisted electrochemistry at the single NP/electrolyte interface. The statistical collision frequency shows that heterogeneous diffusion coefficients among crystal facets facilitate Ag NPs to undergo direction-dependent mass transfer toward the gold ultramicroelectrode. Subsequently, the current amplitudes of transient events indicate that the anisotropy enables variations in dynamic interfacial electron transfer behaviors during photothermal processes. The results presented here demonstrate that the measurement precision of collision electrochemistry can be extended to the sub-nanoparticle level, highlighting the potential for high-throughput material screening with comprehensive kinetics information at the nanoscale.

Engineering Faradaic Electrode Materials for High-Efficiency Water Desalination

Water desalination technologies play a key role in addressing the global water scarcity crisis and ensuring a sustainable supply of freshwater. In contrast to conventional capacitive deionization, which suffers from limitations such as low desalination capacity, carbon anode oxidation, and co-ion expulsion effects of carbon materials, the emerging faradaic electrochemical deionization (FDI) presents a promising avenue for enhancing water desalination performance. These electrode materials employed faradaic charge-transfer processes for ion removal, achieving higher desalination capacity and energy-efficient desalination for high salinity streams. The past decade has witnessed a surge in the advancement of faradaic electrode materials and considerable efforts have been made to explore optimization strategies for improving their desalination performance. This review summarizes the recent progress on the optimization strategies and underlying mechanisms of faradaic electrode materials in pursuit of high-efficiency water desalination, including phase, doping and vacancy engineering, nanocarbon incorporation, heterostructures construction, interlayer spacing engineering, and morphology engineering. The key points of each strategy in design principle, modification method, structural analysis, and optimization mechanism of faradaic materials are discussed in detail. Finally, this work highlights the remaining challenges of faradaic electrode materials and present perspectives for future research.

Dual-Mode Imaging of Dynamic Interaction between Bubbles and Single Nanoplates during the Electrocatalytic Hydrogen Evolution Process

Gas bubble formation at electrochemical interfaces can significantly affect the efficiency and durability of electrocatalysts. However, obtaining comprehensive details on bubble evolution dynamics, particularly their dynamic interaction with high-performance structured electrocatalysts, poses a considerable challenge. Herein, dual-mode interference/total internal reflection fluorescence microscopy is introduced, which allows for the simultaneous capture of the evolution pathway of bubbles and the 3D motion of nanoplate electrocatalysts, providing high-resolution and accurate spatiotemporal information. During the hydrogen evolution reaction, the dynamics of hydrogen bubble generation and their interactions with single nanoplate electrocatalysts at the electrochemical interface are observed. The results unveiled that, under constant potential, bubbles initially manifest as fast-moving nanobubbles, transforming into stationary microbubbles subsequently. The morphology of stationary nanoplates regulates the trajectories of these moving nanobubbles while the pinned microbubbles induce the motion of the electrocatalysts. The dual-mode microscopy can be employed to scrutinize numerous multiphase electrochemical interactions with high spatiotemporal resolution, which can facilitate the rational design of high-performance electrocatalysts.

Investigation of the Single-Particle Scale Structure-Activity Relationship Providing New Insights for the Development of High-Performance Batteries

As electric vehicles, portable electronic devices, and tools have increasingly high requirements for battery energy density and power density, constantly improving battery performance is a research focus. Accurate measurement of the structure-activity relationship of active materials is key to advancing the research of high-performance batteries. However, conventional performance tests of active materials are based on the electrochemical measurement of porous composite electrodes containing active materials, polymer binders, and conductive carbon additives, which cannot establish an accurate structure-activity relationship with the physical characterization of microregions. In this review, in order to promote the accurate measurement and understanding of the structure-activity relationship of materials, the electrochemical measurement and physical characterization of energy storage materials at single-particle scale are reviewed. The potential problems and possible improvement schemes of the single particle electrochemical measurement and physical characterization are proposed. Their potential applications in single particle electrochemical simulation and machine learning are prospected. This review aims to promote the further application of single particle electrochemical measurement and physical characterization in energy storage materials, hoping to achieve 3D unified evaluation of physical characterization, electrochemical measurement, and theoretical simulation at the single particle scale to provide new inspiration for the development of high-performance batteries.

Near-infrared visualisation of single microparticle electrochemistry for batteries

While optical microscopy of single particle electrochemistry has proven insightful for future nanoparticle-based batteries, little is explored for micron-sized particles of more practical interest. This is largely hindered by the currently limited methodology. Accordingly, we report transmission optical microscopy using near-infrared light for accessing intra-particle electrochemistry in virtue of strong light penetration as compared to visible light. Using near-infrared (λ > 730 nm) bright-field microscopy, the redox electrochemistry of single LiCoO2 microparticles can be readily measured based on the measurements of optical contrast changes during electrochemical cycling. Further using the established methodology, we discover that the solid-state diffusion inside most single microparticles is distinctly directional, instead of in an isotropic manner from outer to inner as observed for the other particles. This phenomenon is also observed using dark field scattering microscopy with near-infrared light, suggesting non-uniform crystal inner structures responsible for the geometrically asymmetric heterogeneity of charge transfer kinetics within each single particle. These results indicate potential opportunities offered by the near-infrared optical methodology for operando studying practical battery materials.

Early stages of covalent organic framework formation imaged in operando

Covalent organic frameworks (COFs) are a functional material class able to harness, convert and store energy. However, after almost 20 years of research, there are no coherent prediction rules for their synthesis conditions. This is partly because of an incomplete picture of nucleation and growth at the early stages of formation. Here we use the optical technique interferometric scattering microscopy (iSCAT)1-3 for in operando studies of COF polymerization and framework formation. We observe liquid-liquid phase separation, pointing to the existence of structured solvents in the form of surfactant-free (micro)emulsions in conventional COF synthesis. Our findings show that the role of solvents extends beyond solubility to being kinetic modulators by compartmentation of reactants and catalyst. Taking advantage of these observations, we develop a synthesis protocol for COFs using room temperature instead of elevated temperatures. This work connects framework synthesis with liquid phase diagrams and thereby enables an active design of the reaction environment, emphasizing that visualization of chemical reactions by means of light-scattering-based techniques can be a powerful approach for advancing rational materials synthesis.

Ruddlesden-Popper 2D Perovskite-MoS2 Hybrid Heterojunction Photocathodes for Efficient and Scalable Photo-Rechargeable Li-Ion Batteries

Photo-rechargeable batteries (PRBs) can provide a compact solution to power autonomous smart devices located at remote sites that cannot be connected with the grid. The study reports the Ruddlesden-Popper (RP) metal halide perovskite (MHP) and molybdenum disulfide (MoS2) hybrid heterojunction-based photocathodes for Li-ion photo-rechargeable battery (Li-PRB) applications. Hybrid Lithium-ion batteries (LIBs) have demonstrated an average discharge specific capacity of 144.46 and 129.17 mAhg-1 for 50 cycles when operating at 176 and 294 mAg-1, respectively compared to the pristine LIBs which have shown specific capacity of 37.48 and 25.60 mAhg-1 under similar conditions. Hybrid Li-PRB has achieved an average dark discharge specific capacities of 128.66 mAhg-1 (capacity retention: 96.56%) which enhanced to 180.67 mAhg-1 under illumination (capacity retention: 97.39%; photo-enhancement: 40.42%) at 64 mAg-1. Excellent performance of hybrid Li-PRB is attributed to the formation of type-II heterojunction that leads to improved crystallinity and film morphology. The PRB has demonstrated a high photo conversion and storage efficiency (PC-SE) of 0.52% under standard 1 Sun illumination, which outperforms other previously reported MHP based LIBs and PRBs. This work provides a novel approach of harnessing the potential of MHPs for PRBs and offers new avenues for MHP photocathodes for various applications beyond PRBs.

Mitigating Strain Accumulation in Li2RuO3 via Fluorine Doping

Lithium ruthenium oxide (Li2RuO3) is an archetypal lithium rich cathode material (LRCM) with both cation and anion redox reactions (ARRs). Commonly, the instability of oxygen redox activities has been regarded as the root cause of its performance degradation in long-term operation. However, we find that not triggering ARRs does not improve and even worsens its cyclability due to the detrimental strain accumulation induced by Ru redox activities. To solve this problem, we demonstrate that F-doping in Li2RuO3 can alter its preferential orientation and buffer interlayer repulsion upon Ru redox, both of which can mitigate the strain accumulation along the c-axis and improve its structural stability. This work highlights the importance of optimizing cation redox reactions in LRCMs and provides a new perspective for their rational design.

Scanning Electrochemical Microscopy Meets Optical Microscopy: Probing the Local Paths of Charge Transfer Operando in Booster-Microparticles for Flow Batteries

Understanding the oxidation/reduction dynamics of secondary microparticles formed from agglomerated nanoscale primary particles is crucial for advancing electrochemical energy storage technologies. In this study, the behavior of individual copper hexacyanoferrate (CuHCF) microparticles is explored at both global and local scales combining scanning electrochemical microscopy (SECM), for electrochemical interrogation of a single, but global-scale microparticle, and optical microscopy monitoring to obtain a higher resolution dynamic image of the local electrochemistry within the same particle. Chronoamperometric experiments unveil a multistep oxidation/reduction process with varying dynamics. On the one hand, the global SECM analysis enables quantifying the charge transfer as well as its dynamics at the single microparticle level during the oxidation/reduction cycles by a redox mediator in solution. These conditions allow mimicking the charge storage processes in these particles when they are used as solid boosters in redox flow batteries. On the other hand, optical imaging with sub-particle resolution allows the mapping of local conversion rates and state-of-charge within individual CuHCF particles. These maps reveal that regions of different material loadings exhibit varying charge storage capacities and conversion rates. The findings highlight the significance of porous nanostructures and provide valuable insights for designing more efficient energy storage materials.

Origins and Importance of Intragranular Cracking in Layered Lithium Transition Metal Oxide Cathodes

Li-ion batteries have a pivotal role in the transition toward electric transportation. Ni-rich layered transition metal oxide (LTMO) cathode materials promise high specific capacity and lower cost but exhibit faster degradation compared with lower Ni alternatives. Here, we employ high-resolution electron microscopy and spectroscopy techniques to investigate the nanoscale origins and impact on performance of intragranular cracking (within primary crystals) in Ni-rich LTMOs. We find that intragranular cracking is widespread in charged specimens early in cycle life but uncommon in discharged samples even after cycling. The distribution of intragranular cracking is highly inhomogeneous. We conclude that intragranular cracking is caused by local stresses that can have several independent sources: neighboring particle anisotropic expansion/contraction, Li- and TM-inhomogeneities at the primary and secondary particle levels, and interfacing of electrochemically active and inactive phases. Our results suggest that intragranular cracks can manifest at different points of life of the cathode and can potentially lead to capacity fade and impedance rise of LTMO cathodes through plane gliding and particle detachment that lead to exposure of additional surfaces to the electrolyte and loss of electrical contact.

Microstructures of layered Ni-rich cathodes for lithium-ion batteries

Millions of electric vehicles (EVs) on the road are powered by lithium-ion batteries (LIBs) based on nickel-rich layered oxide (NRLO) cathodes, and they suffer from a limited driving range and safety concerns. Increasing the Ni content is a key way to boost the energy densities of LIBs and alleviate the EV range anxiety, which are, however, compromised by the rapid performance fading. One unique challenge lies in the worsening of the microstructural stability with a rising Ni-content in the cathode. In this review, we focus on the latest advances in the understanding of NLRO microstructures, particularly the microstructural degradation mechanisms, state-of-the-art stabilization strategies, and advanced characterization methods. We first elaborate on the fundamental mechanisms underlying the microstructural failures of NRLOs, including anisotropic lattice evolution, microcracking, and surface degradation, as a result of which other degradation processes, such as electrolyte decomposition and transition metal dissolution, can be severely aggravated. Afterwards, we discuss representative stabilization strategies, including the surface treatment and construction of radial concentration gradients in polycrystalline secondary particles, the fabrication of rod-shaped primary particles, and the development of single-crystal NRLO cathodes. We then introduce emerging microstructural characterization techniques, especially for identification of the particle orientation, dynamic changes, and elemental distributions in NRLO microstructures. Finally, we provide perspectives on the remaining challenges and opportunities for the development of stable NRLO cathodes for the zero-carbon future.

Cascaded momentum-space polarization filters enabled label-free black-field microscopy for single nanoparticles analysis

Label-free optical imaging of single-nanometer-scale matter is extremely important for a variety of biomedical, physical, and chemical investigations. One central challenge is that the background intensity is much stronger than the intensity of the scattering light from single nano-objects. Here, we propose an optical module comprising cascaded momentum-space polarization filters that can perform vector field modulation to block most of the background field and result in an almost black background; in contrast, only a small proportion of the scattering field is blocked, leading to obvious imaging contrast enhancement. This module can be installed in various optical microscopies to realize a black-field microscopy. Various single nano-objects with dimensions smaller than 20 nm appear distinctly in the black-field images. The chemical reactions occurring on single nanocrystals with edge lengths of approximately 10 nm are in situ real-time monitored by using the black-field microscopy. This label-free black-field microscopy is highly promising for a wide range of future multidisciplinary science applications.

Direct imaging of dynamic heterogeneous lithium-gold interaction at the electrochemical interface during the charging/discharging processes

Lithium can smoothly plate on certain lithium alloys in theory, such as the Li-Au alloy, making the alloy/metal films promising current collectors for high energy density anode-free batteries. However, the actual performance of the batteries with alloy film electrodes often rapidly deteriorates. It remains challenging for current imaging approaches to provide sufficient details for fully understanding the process. Here, a "see-through" operando optical microscopic approach that allows direct imaging of Li-Au interaction with high spatiotemporal and chemical resolution has been developed. Through this approach, a two-step Li-Au alloying process that exhibits interesting complementary spatiotemporal evolution paths has been discovered. The alloying process regulates the nucleation of further Li deposition, while the Li nucleation sites generate pores on the electrode film. After several cycles, film rupture occurs due to the generation of an increased number of pores, thus explaining the previously unclear mechanism of poor cycling stability. We have also elucidated the deterioration mechanism of silver electrodes: the growth of defect pores in size, independent of the alloying process. Overall, this new imaging approach opens up an effective and simple way to monitor the dynamic heterogeneity of metal-metal interaction at the electrochemical interface, which could provide helpful insight for designing high-performance batteries.

In Situ Transmission Electron Microscopy Methods for Lithium-Ion Batteries

In situ Transmission Electron Microscopy (TEM) stands as an invaluable instrument for the real-time examination of the structural changes in materials. It features ultrahigh spatial resolution and powerful analytical capability, making it significantly versatile across diverse fields. Particularly in the realm of Lithium-Ion Batteries (LIBs), in situ TEM is extensively utilized for real-time analysis of phase transitions, degradation mechanisms, and the lithiation process during charging and discharging. This review aims to provide an overview of the latest advancements in in situ TEM applications for LIBs. Additionally, it compares the suitability and effectiveness of two techniques: the open cell technique and the liquid cell technique. The technical aspects of both the open cell and liquid cell techniques are introduced, followed by a comparison of their applications in cathodes, anodes, solid electrolyte interphase (SEI) formation, and lithium dendrite growth in LIBs. Lastly, the review concludes by stimulating discussions on possible future research trajectories that hold potential to expedite the progression of battery technology.

Surface Plasmon Resonance Biosensors: A Review of Molecular Imaging with High Spatial Resolution

Surface plasmon resonance (SPR) is a powerful tool for determining molecular interactions quantitatively. SPR imaging (SPRi) further improves the throughput of SPR technology and provides the spatially resolved capability for observing the molecular interaction dynamics in detail. SPRi is becoming more and more popular in biological and chemical sensing and imaging. However, SPRi suffers from low spatial resolution due to the imperfect optical components and delocalized features of propagating surface plasmonic waves along the surface. Diverse kinds of approaches have been developed to improve the spatial resolution of SPRi, which have enormously impelled the development of the methodology and further extended its possible applications. In this minireview, we introduce the mechanisms for building a high-spatial-resolution SPRi system and present its experimental schemes from prism-coupled SPRi and SPR microscopy (SPRM) to surface plasmonic scattering microscopy (SPSM); summarize its exciting applications, including molecular interaction analysis, molecular imaging and profiling, tracking of single entities, and analysis of single cells; and discuss its challenges in recent decade as well as the promising future.

Structural Understanding for High-Voltage Stabilization of Lithium Cobalt Oxide

The rapid development of modern consumer electronics is placing higher demands on the lithium cobalt oxide (LiCoO2 ; LCO) cathode that powers them. Increasing operating voltage is exclusively effective in boosting LCO capacity and energy density but is inhibited by the innate high-voltage instability of the LCO structure that serves as the foundation and determinant of its electrochemical behavior in lithium-ion batteries. This has stimulated extensive research on LCO structural stabilization. Here, it is focused on the fundamental structural understanding of LCO cathode from long-term studies. Multi-scale structures concerning LCO bulk and surface and various structural issues along with their origins and corresponding stabilization strategies with specific mechanisms are uncovered and elucidated at length, which will certainly deepen and advance the knowledge of LCO structure and further its inherent relationship with electrochemical performance. Based on these understandings, remaining questions and opportunities for future stabilization of the LCO structure are also emphasized.

Optical Approach for Mapping the Intercalation Capacity of Porous Electrodes

The intercalation capacity of a porous electrode in real batteries is not uniform spatially due to the inevitable structural and compositional inhomogeneity and site-dependent ion and electron transport features. Reliable methods to quantify the capacity distribution are highly desirable but absent so far in battery research. In this paper, a novel optical technique, oblique incident reflection difference (OIRD), was employed to monitor in situ the electrochemical ion (de)intercalation behavior of Prussian blue analogue (PBA) porous films. The OIRD signal responded synchronously to the ion (de)intercalation, and the change in the OIRD signal (ΔI) was positively correlated with the local electrochemical capacity, thereby enabling mapping of the spatially resolved ion storage capacity of the films. Optical analysis further showed that the OIRD response originated from the ion (de)intercalation-induced dielectric constant change of PBA films. This work therefore offers an intriguing in situ and spatially resolved tool for the study of rechargeable batteries.

Asynchronous domain dynamics and equilibration in layered oxide battery cathode

To improve lithium-ion battery technology, it is essential to probe and comprehend the microscopic dynamic processes that occur in a real-world composite electrode under operating conditions. The primary and secondary particles are the structural building blocks of battery cathode electrodes. Their dynamic inconsistency has profound but not well-understood impacts. In this research, we combine operando coherent multi-crystal diffraction and optical microscopy to examine the chemical dynamics in local domains of layered oxide cathode. Our results not only pinpoint the asynchronicity of the lithium (de)intercalation at the sub-particle level, but also reveal sophisticated diffusion kinetics and reaction patterns, involving various localized processes, e.g., chemical onset, reaction front propagation, domains equilibration, particle deformation and motion. These observations shed new lights onto the activation and degradation mechanisms of state-of-the-art battery cathode materials.

Fundamentals, status and challenges of direct recycling technologies for lithium ion batteries

Advancement in energy storage technologies is closely related to social development. However, a significant conflict has arisen between the explosive growth in battery demand and resource availability. Facing the upcoming large-scale disposal problem of spent lithium-ion batteries (LIBs), their recycling technology development has become key. Emerging direct recycling has attracted widespread attention in recent years because it aims to 'repair' the battery materials, rather than break them down and extract valuable products from their components. To achieve this goal, a profound understanding of the failure mechanisms of spent LIB electrode materials is essential. This review summarizes the failure mechanisms of LIB cathode and anode materials and the direct recycling strategies developed. We systematically explore the correlation between the failure mechanism and the required repair process to achieve efficient and even upcycling of spent LIB electrode materials. Furthermore, we systematically introduce advanced in situ characterization techniques that can be utilized for investigating direct recycling processes. We then compare different direct recycling strategies, focussing on their respective advantages and disadvantages and their applicability to different materials. It is our belief that this review will offer valuable guidelines for the design and selection of LIB direct recycling methods in future endeavors. Finally, the opportunities and challenges for the future of battery direct recycling technology are discussed, paving the way for its further development.

Defects and nanostrain gradients control phase transition mechanisms in single crystal high-voltage lithium spinel

Lithiation dynamics and phase transition mechanisms in most battery cathode materials remain poorly understood, because of the challenge in differentiating inter- and intra-particle heterogeneity. In this work, the structural evolution inside Li1-xMn1.5Ni0.5O4 single crystals during electrochemical delithiation is directly resolved with operando X-ray nanodiffraction microscopy. Metastable domains of solid-solution intermediates do not appear associated with the reaction front between the lithiated and delithiated phases, as predicted by current phase transition theory. Instead, unusually persistent strain gradients inside the single crystals suggest that the shape and size of solid solution domains are instead templated by lattice defects, which guide the entire delithiation process. Morphology, strain distributions, and tilt boundaries reveal that the (Ni2+/Ni3+) and (Ni3+/Ni4+) phase transitions proceed through different mechanisms, offering solutions for reducing structural degradation in high voltage spinel active materials towards commercially useful durability. Dynamic lattice domain reorientation during cycling are found to be the cause for formation of permanent tilt boundaries with their angular deviation increasing during continuous cycling.

Metal Core-Shell Nanoparticle Supercrystals: From Photoactivation of Hydrogen Evolution to Photocorrosion

Gas nanobubbles are directly linked to many important chemical reactions. While they can be detrimental to operational devices, they also reflect the local activity at the nanoscale. Here, supercrystals made of highly monodisperse Ag@Pt core-shell nanoparticles are first grown onto a solid support and fully characterized by electron microscopies and X-ray scattering. Supercrystals are then used as a plasmonic photocatalytic platform for triggering the hydrogen evolution reaction. The catalytic activity is measured operando at the single supercrystal level by high-resolution optical microscopy, which allows gas nanobubble nucleation to be probed at the early stage with high temporal resolution and the amount of gas molecules trapped inside them to be quantified. Finally, a correlative microscopy approach and high-resolution electron energy loss spectroscopy help to decipher the mechanisms at the origin of the local degradation of the supercrystals during catalysis, namely nanoscale erosion and corrosion.

In Situ Mapping of Activity Distribution of V(II)/V(III) and Onset Potential Distribution of Hydrogen Evolution Side Reaction in Vanadium Flow Batteries

Vanadium flow batteries (VFBs) face a challenge with the low reaction rates of the V(II)/V(III) redox couple, which limits the performance of VFBs. Additionally, the negative electrode in VFBs is often accompanied by the persistent hydrogen evolution reaction (HER), which is difficult to eliminate. Therefore, understanding the spatial distribution of activity on the negative electrode and the HER side reaction on the electrode surface is of critical importance. This study proposes a weak measurement imaging method to characterize the spatial distribution of surface activity and HER onset potential on the negative electrode in VFBs). This method enables the visualization and in situ detection of key parameters such as the absolute values of |ipa |, |ipc |, |∆E|, |ipc /ipa |, and the HER onset potential. By comparing three different types of graphite felts with varying activity levels, it validates the feasibility of this method. Furthermore, electrochemical stability tests are conducted to study the electrodes repeatability, uniformity, and durability. This method holds promise in guiding the design of electrodes with enhanced activity, good reversibility, minimized HER side reactions, and uniform distribution.

Iontronic microscopy of a tungsten microelectrode: "seeing" ionic currents under an optical microscope

Optical methods for monitoring electrochemical reactions at an interface are advantageous because of their table-top setup and ease of integration into reactors. Here we apply EDL-modulation microscopy to one of the main components of amperometric measurement devices: a microelectrode. We present experimental measurements of the EDL-modulation contrast from the tip of a tungsten microelectrode at various electrochemical potentials inside a ferrocene-dimethanol Fe(MeOH)2 solution. Using the combination of the dark-field scattering microscope and the lock-in detection technique, we measure the phase and amplitude of local ion-concentration oscillations in response to an AC potential as the electrode potential is scanned through the redox-activity window of the dissolved species. We present the amplitude and phase map of this response, as such this method can be used to study the spatial and temporal variations of the ion-flux due to an electrochemical reaction close to metallic and semiconducting objects of general geometry. We discuss the advantages and possible extensions of using this microscopy method for wide-field imaging of ionic currents.

Unsupervised Analysis of Optical Imaging Data for the Discovery of Reactivity Patterns in Metal Alloy

Operando wide-field optical microscopy imaging yields a wealth of information about the reactivity of metal interfaces, yet the data are often unstructured and challenging to process. In this study, the power of unsupervised machine learning (ML) algorithms is harnessed to analyze chemical reactivity images obtained dynamically by reflectivity microscopy in combination with ex situ scanning electron microscopy to identify and cluster the chemical reactivity of particles in Al alloy. The ML analysis uncovers three distinct clusters of reactivity from unlabeled datasets. A detailed examination of representative reactivity patterns confirms the chemical communication of generated OH- fluxes within particles, as supported by statistical analysis of size distribution and finite element modelling (FEM). The ML procedures also reveal statistically significant patterns of reactivity under dynamic conditions, such as pH acidification. The results align well with a numerical model of chemical communication, underscoring the synergy between data-driven ML and physics-driven FEM approaches.

Three-dimensional operando optical imaging of particle and electrolyte heterogeneities inside Li-ion batteries

Understanding (de)lithiation heterogeneities in battery materials is key to ensure optimal electrochemical performance. However, this remains challenging due to the three-dimensional morphology of electrode particles, the involvement of both solid- and liquid-phase reactants and a range of relevant timescales (seconds to hours). Here we overcome this problem and demonstrate the use of confocal microscopy for the simultaneous three-dimensional operando measurement of lithium-ion dynamics in individual agglomerate particles, and the electrolyte in batteries. We examine two technologically important cathode materials: LixCoO2 and LixNi0.8Mn0.1Co0.1O2. The surface-to-core transport velocity of Li-phase fronts and volume changes are captured as a function of cycling rate. Additionally, we visualize heterogeneities in the bulk and at agglomerate surfaces during cycling, and image microscopic liquid electrolyte concentration gradients. We discover that surface-limited reactions and intra-agglomerate competing rates control (de)lithiation and structural heterogeneities in agglomerate-based electrodes. Importantly, the conditions under which optical imaging can be performed inside the complex environments of battery electrodes are outlined.

Spatiotemporally and Chemically Resolved Imaging of Electrocatalytic Oxygen Evolution on Single Nanoplates of Cobalt-Layered Hydroxide

Transition metal-layered hydroxides have been extensively studied in order to address the key challenge of slow kinetics of the oxygen evolution reaction (OER). However, how the catalytically active sites are evolved and the corresponding heterogeneous structure-property relationship remain unclear. Herein, using cobalt-layered hydroxide as a representative catalyst, we report a strategy for the comprehensive in situ investigation of the electrocatalytic OER process at the single electrocatalyst level using combined electrochemiluminescence (ECL) and vis-absorption microscopy. The stepwise heterogeneous electrocatalytic responses of single-cobalt hydroxide nanoplates are unveiled with ECL imaging, and the corresponding valence state changes are revealed by vis-absorption imaging. The correlated in situ and ex situ multimode analyses indicate that, during the oxidation process, the Co2+ cations in the tetrahedral sites (CoTd2+) turned into CoTd3+ and even the highly unstable CoTd4+, assisted by the interlayer water in a metastable CoOOH·xH2O phase. Crucially, the CoTd4+ sites are mainly distributed in the inner part of the nanoplates and show superior electrocatalytic properties. The correlative single-particle imaging approach for electrocatalytic process analysis with high spatiotemporal and chemical resolution enables in-depth mechanistic insights to be generated and, in turn, will benefit the rational design of electrocatalysts with enhanced performance.

Revealing the Grain-Boundary-Cracking Induced Capacity Decay of a High-Voltage LiCoO2 at 4.6 V

During a practical battery manufacture process, the LiCoO2 (LCO) electrodes are usually rolled with high pressure to achieve better performance, including reducing electrode polarization, increasing compact density, enhancing mechanical toughness, etc. In this work, a high-voltage LCO (HV-LCO) is achieved via modulating a commercialized LCO with an Al/F enriched and spinel reinforced surface structure. We reveal that the rolling can more or less introduce risk of grain-boundary-cracking (GBC) inside the HV-LCO and accelerate the capacity decay when cycled at 3-4.6 V vs Li/Li+. In particular, the concept of interface structure is proposed to explain the reason for the deteriorated cycle stability. As the GBC is generated, the interface structure of HV-LCO alters from a surface spinel phase to a hybrid of surface spinel plus boundary layer phases, leading to the exposure of some the nonprotective layer phase against the electrolyte. This alternation causes serious bulk structure damage upon cycles, including expanding GBC among the primary crystals, forming intragranular cracks and inactive spinel phases inside the bulk regions, etc., eventually leading to the deteriorated cycle stability. Above all, we realize that it is far from enough to achieve a eligible high-voltage LCO via only applying surface modification. This work provides a new insight for developing more advanced LCO cathodes.

Learning heterogeneous reaction kinetics from X-ray videos pixel by pixel

Reaction rates at spatially heterogeneous, unstable interfaces are notoriously difficult to quantify, yet are essential in engineering many chemical systems, such as batteries1 and electrocatalysts2. Experimental characterizations of such materials by operando microscopy produce rich image datasets3-6, but data-driven methods to learn physics from these images are still lacking because of the complex coupling of reaction kinetics, surface chemistry and phase separation7. Here we show that heterogeneous reaction kinetics can be learned from in situ scanning transmission X-ray microscopy (STXM) images of carbon-coated lithium iron phosphate (LFP) nanoparticles. Combining a large dataset of STXM images with a thermodynamically consistent electrochemical phase-field model, partial differential equation (PDE)-constrained optimization and uncertainty quantification, we extract the free-energy landscape and reaction kinetics and verify their consistency with theoretical models. We also simultaneously learn the spatial heterogeneity of the reaction rate, which closely matches the carbon-coating thickness profiles obtained through Auger electron microscopy (AEM). Across 180,000 image pixels, the mean discrepancy with the learned model is remarkably small (<7%) and comparable with experimental noise. Our results open the possibility of learning nonequilibrium material properties beyond the reach of traditional experimental methods and offer a new non-destructive technique for characterizing and optimizing heterogeneous reactive surfaces.

Interrogating the Light-Induced Charging Mechanism in Li-Ion Batteries Using Operando Optical Microscopy

Photobatteries, batteries with a light-sensitive electrode, have recently been proposed as a way of simultaneously capturing and storing solar energy in a single device. Despite reports of photocharging with multiple different electrode materials, the overall mechanism of operation remains poorly understood. Here, we use operando optical reflection microscopy to investigate light-induced charging in LixV2O5 electrodes. We image the electrode, at the single-particle level, under three conditions: (a) with a closed circuit and light but no electronic power source (photocharging), (b) during galvanostatic cycling with light (photoenhanced), and (c) with heat but no light (thermal). We demonstrate that light can indeed drive lithiation changes in LixV2O5 while maintaining charge neutrality, possibly via a combination of faradaic and nonfaradaic effects taking place in individual particles. Our results provide an addition to the photobattery mechanistic model highlighting that both intercalation-based charging and lithium concentration polarization effects contribute to the increased photocharging capacity.

O3 to O1 Phase Transitions in Highly Delithiated NMC811 at Elevated Temperatures

Nickel-rich layered oxide cathodes such as NMC811 (Li_xNi_0.8Mn_0.1Co_0.1O₂) currently have the highest practical capacities of cathodes used commercially, approaching 200 mAh/g. Lithium is removed from NMC811 via a solid-solution behavior when delithiated to x_Li > 0.10, maintaining the same layered (O3 structure) throughout as observed via operando diffraction measurements. Although it is possible to further delithiate NMC811, it is kinetically challenging, and there are significant side reactions between the electrolyte and cathode surface. Here, small format, NMC811-graphite pouch cells were charged to high voltages at elevated temperatures and held for days to access high states of delithiation. Rietveld refinements on high-resolution diffraction data and indexing of selected area electron diffraction patterns, both acquired ex situ, show that NMC811 undergoes a partial and reversible transition from the O3 to the O1 phase under these conditions. The O1 phase fraction depends not only on the concentration of intercalated lithium but also on the hold temperature and hold time, indicating that the phase transition is kinetically controlled. ¹H NMR spectroscopy shows that the proton concentration decreases with O1 phase fraction and is not, therefore, likely to be driving the O3-O1 phase transition.

Temperature-Driven Anisotropic Mg2+ Doping for a Pillared LiCoO2 Interlayer Surface in High-Voltage Applications

High-voltage lithium cobalt oxide (LiCoO₂) has the highest volumetric energy density among commercial cathode materials in lithium-ion batteries due to its high working voltage and compacted density. However, under high voltage (4.6 V), the capacity of LiCoO₂ fades rapidly due to parasitic reactions of high-valent cobalt with the electrolyte and the loss of lattice oxygen at the interface. In this study, we report a temperature-driven anisotropic doping phenomenon of Mg²⁺ that results in surface-populated Mg²⁺ doping to the side of the (003) plane of LiCoO₂. Mg²⁺ dopants enter the Li⁺ sites, lower the valence state of Co ions with less hybridization between the O 2p and Co 3d orbitals, promote the formation of surface Li⁺/Co²⁺ anti-sites, and suppress lattice oxygen loss on the surface. As a result, the modified LiCoO₂ demonstrates excellent cycling performance under 4.6 V, reaching an energy density of 911.2 Wh/kg at 0.1C and retaining 92.7% (184.3 mAh g^-1) of its capacity after 100 cycles at 1C. Our results highlight a promising avenue for enhancing the electrochemical performance of LiCoO₂ by anisotropic surface doping with Mg²⁺.

Imaging and Quantifying the Chemical Communication between Single Particles in Metal Alloys

The communication within particle agglomerates in industrial alloys can have a significant impact on the macroscopic reactivity, putting a high demand on the adaptation of wide-field methodologies to clarify this phenomenon. In this work, we report the application of correlated optical microscopies probing operando both local pH and local surface chemical transformation correlated with identical location scanning electron microscopy to quantify in situ the structure reactivity of particle agglomerates of foreign elements in the Al alloy. The optical operando analyses allow us (i) to reveal and quantify the local production of OH^- from proton and oxygen reduction at individual Si- or Fe-rich microparticles and (ii) to quantify (and model) the chemical communication between these active sites, within a few micrometer range, on the local chemical transformation of the material. Wide-field image analysis highlights the statistical importance of chemical communication that may introduce a new conceptual framework for the understanding of the mechanisms in related fields of charge transfer, electrocatalysis, and corrosion.

Direct Observation of Dynamic Lithium Diffusion Behavior in Nickel-Rich, LiNi0.8Mn0.1Co0.1O2 (NMC811) Cathodes Using Operando Muon Spectroscopy

Ni-rich layered oxide cathode materials such as LiNi_0.8Mn_0.1Co_0.1O₂ (NMC811) are widely tipped as the next-generation cathodes for lithium-ion batteries. The NMC class offers high capacities but suffers an irreversible first cycle capacity loss, a result of slow Li⁺ diffusion kinetics at a low state of charge. Understanding the origin of these kinetic hindrances to Li⁺ mobility inside the cathode is vital to negate the first cycle capacity loss in future materials design. Here, we report on the development of operando muon spectroscopy (μSR) to probe the Å-length scale Li⁺ ion diffusion in NMC811 during its first cycle and how this can be compared to electrochemical impedance spectroscopy (EIS) and the galvanostatic intermittent titration technique (GITT). Volume-averaged muon implantation enables measurements that are largely unaffected by interface/surface effects, thus providing a specific characterization of the fundamental bulk properties to complement surface-dominated electrochemical methods. First cycle measurements show that the bulk Li⁺ mobility is less affected than the surface Li⁺ mobility at full depth of discharge, indicating that sluggish surface diffusion is the likely cause of first cycle irreversible capacity loss. Additionally, we demonstrate that trends in the nuclear field distribution width of the implanted muons during cycling correlate with those observed in differential capacity, suggesting the sensitivity of this μSR parameter to structural changes during cycling.

Recent advances in in situ and operando characterization techniques for Li7La3Zr2O12-based solid-state lithium batteries

Li₇La₃Zr₂O₁₂ (LLZO)-based solid-state Li batteries (SSLBs) have emerged as one of the most promising energy storage systems due to the potential advantages of solid-state electrolytes (SSEs), such as ionic conductivity, mechanical strength, chemical stability and electrochemical stability. However, there remain several scientific and technical obstacles that need to be tackled before they can be commercialised. The main issues include the degradation and deterioration of SSEs and electrode materials, ambiguity in the Li⁺ migration routes in SSEs, and interface compatibility between SSEs and electrodes during the charging and discharging processes. Using conventional ex situ characterization techniques to unravel the reasons that lead to these adverse results often requires disassembly of the battery after operation. The sample may be contaminated during the disassembly process, resulting in changes in the material properties within the battery. In contrast, in situ/operando characterization techniques can capture dynamic information during cycling, enabling real-time monitoring of batteries. Therefore, in this review, we briefly illustrate the key challenges currently faced by LLZO-based SSLBs, review recent efforts to study LLZO-based SSLBs using various in situ/operando microscopy and spectroscopy techniques, and elaborate on the capabilities and limitations of these in situ/operando techniques. This review paper not only presents the current challenges but also outlines future developmental prospects for the practical implementation of LLZO-based SSLBs. By identifying and addressing the remaining challenges, this review aims to enhance the comprehensive understanding of LLZO-based SSLBs. Additionally, in situ/operando characterization techniques are highlighted as a promising avenue for future research. The findings presented here can serve as a reference for battery research and provide valuable insights for the development of different types of solid-state batteries.

Fast Li-ion Storage and Dynamics in TiO2 Nanoparticle Clusters Probed by Smart Scanning Electrochemical Cell Microscopy

Anatase TiO₂ is a promising material for Li-ion (Li⁺ ) batteries with fast charging capability. However, Li⁺ (de)intercalation dynamics in TiO₂ remain elusive and reported diffusivities span many orders of magnitude. Here, we develop a smart protocol for scanning electrochemical cell microscopy (SECCM) with in situ optical microscopy (OM) to enable the high-throughput charge/discharge analysis of single TiO₂ nanoparticle clusters. Directly probing active nanoparticles revealed that TiO₂ with a size of ≈50 nm can store over 30 % of the theoretical capacity at an extremely fast charge/discharge rate of ≈100 C. This finding of fast Li⁺ storage in TiO₂ particles strengthens its potential for fast-charging batteries. More generally, smart SECCM-OM should find wide applications for high-throughput electrochemical screening of nanostructured materials.

Transmission-based charge modulation microscopy on conjugated polymer blend field-effect transistors

Charge modulation microscopy (CMM) is an electro-optical method that is capable of mapping the spatial distribution of induced charges in an organic field-effect transistor (OFET). Here, we report a new (and simple) implementation of CMM in transmission geometry with camera-based imaging. A significant improvement in data acquisition speed (by at least an order of magnitude) has been achieved while preserving the spatial and spectral resolution. To demonstrate the capability of the system, we measured the spatial distribution of the induced charges in an OFET with a polymer blend of indacenodithiophene-co-benzothiadiazole and poly-vinylcarbazole that shows micrometer-scale phase separation. We were able to resolve spatial variations in the accumulated charge density on a length scale of 500 nm. We demonstrated through a careful spectral analysis that the measured signal is a genuine charge accumulation signal that is not dominated by optical artifacts.

Formation and impact of nanoscopic oriented phase domains in electrochemical crystalline electrodes

Electrochemical phase transformation in ion-insertion crystalline electrodes is accompanied by compositional and structural changes, including the microstructural development of oriented phase domains. Previous studies have identified prevailingly transformation heterogeneities associated with diffusion- or reaction-limited mechanisms. In comparison, transformation-induced domains and their microstructure resulting from the loss of symmetry elements remain unexplored, despite their general importance in alloys and ceramics. Here, we map the formation of oriented phase domains and the development of strain gradient quantitatively during the electrochemical ion-insertion process. A collocated four-dimensional scanning transmission electron microscopy and electron energy loss spectroscopy approach, coupled with data mining, enables the study. Results show that in our model system of cubic spinel MnO₂ nanoparticles their phase transformation upon Mg²⁺ insertion leads to the formation of domains of similar chemical identity but different orientations at nanometre length scale, following the nucleation, growth and coalescence process. Electrolytes have a substantial impact on the transformation microstructure ('island' versus 'archipelago'). Further, large strain gradients build up from the development of phase domains across their boundaries with high impact on the chemical diffusion coefficient by a factor of ten or more. Our findings thus provide critical insights into the microstructure formation mechanism and its impact on the ion-insertion process, suggesting new rules of transformation structure control for energy storage materials.

Coherent correlation imaging for resolving fluctuating states of matter

Fluctuations and stochastic transitions are ubiquitous in nanometre-scale systems, especially in the presence of disorder. However, their direct observation has so far been impeded by a seemingly fundamental, signal-limited compromise between spatial and temporal resolution. Here we develop coherent correlation imaging (CCI) to overcome this dilemma. Our method begins by classifying recorded camera frames in Fourier space. Contrast and spatial resolution emerge by averaging selectively over same-state frames. Temporal resolution down to the acquisition time of a single frame arises independently from an exceptionally low misclassification rate, which we achieve by combining a correlation-based similarity metric^1,2 with a modified, iterative hierarchical clustering algorithm^3,4. We apply CCI to study previously inaccessible magnetic fluctuations in a highly degenerate magnetic stripe domain state with nanometre-scale resolution. We uncover an intricate network of transitions between more than 30 discrete states. Our spatiotemporal data enable us to reconstruct the pinning energy landscape and to thereby explain the dynamics observed on a microscopic level. CCI massively expands the potential of emerging high-coherence X-ray sources and paves the way for addressing large fundamental questions such as the contribution of pinning^5-8 and topology^9-12 in phase transitions and the role of spin and charge order fluctuations in high-temperature superconductivity^13,14.

Quantum view of Li-ion high mobility at carbon-coated cathode interfaces

Lithium-ion batteries (LIBs) are among the most promising power sources for electric vehicles, portable electronics and smart grids. In LIBs, the cathode is a major bottleneck, with a particular reference to its low electrical conductivity and Li-ion diffusivity. The coating with carbon layers is generally employed to enhance the electrical conductivity and to protect the active material from degradation during operation. Here, we demonstrate that this layer has a primary role in the lithium diffusivity into the cathode nanoparticles. Positron is a useful quantum probe at the electroactive materials/carbon interface to sense the mobility of Li-ion. Broadband electrical spectroscopy demonstrates that only a small number of Li-ions are moving, and that their diffusion strongly depends on the type of carbon additive. Positron annihilation and broadband electrical spectroscopies are crucial complementary tools to investigate the electronic effect of the carbon phase on the cathode performance and Li-ion dynamics in electroactive materials.

Dynamic Investigation of Battery Materials via Advanced Visualization: From Particle, Electrode to Cell Level

Li-ion batteries, the most-popular secondary battery, are typically electrochemical systems controlled by ion-insertion dynamics. The battery dynamics involve mass transport, charge transfer, ion-electron coupled reactions, electrolyte penetration, ion solvation, and interfacial evolution. However, it is difficult for the traditional electrochemical methods to capture the accurate and individual details of the dynamic processes in "black box" batteries; instead, only the net result of multi-factors on the whole scale. Recently, different advanced visualization techniques have been developed, which provide powerful tools to track and monitor the internal real-time dynamic processes, giving intuitive details and fine information at various scales from crystal lattice, single particle, electrode to cell level. Here, the recent progress on the investigation of electrochemical dynamics in battery materials are reviewed, via developed techniques across wide timescales and space-scales, including the dynamic process inside the active particle, kinetics issues at the electrode/electrolyte interface, dynamic inhomogeneity in the electrode, and dynamic transportation at the cell level. Finally, the fundamental principles to improve the battery dynamics are summarized and new technologies for future more stringent conditions are highlighted. In prospect, this review opens sight on the battery interior for a clearer, deeper, and more thorough understanding of the dynamics.

Multivariate hyperspectral data analytics across length scales to probe compositional, phase, and strain heterogeneities in electrode materials

The origins of performance degradation in batteries can be traced to atomistic phenomena, accumulated at mesoscale dimensions, and compounded up to the level of electrode architectures. Hyperspectral X-ray spectromicroscopy techniques allow for the mapping of compositional variations, and phase separation across length scales with high spatial and energy resolution. We demonstrate the design of workflows combining singular value decomposition, principal-component analysis, k-means clustering, and linear combination fitting, in conjunction with a curated spectral database, to develop high-accuracy quantitative compositional maps of the effective depth of discharge across individual positive electrode particles and ensembles of particles. Using curated reference spectra, accurate and quantitative mapping of inter- and intraparticle compositional heterogeneities, phase separation, and stress gradients is achieved for a canonical phase-transforming positive electrode material, α-V₂O₅. Phase maps from single-particle measurements are used to reconstruct directional stress profiles showcasing the distinctive insights accessible from a standards-informed application of high-dimensional chemical imaging.

Oscillatory Reaction Activity of Single Cuprous Oxide Microparticles with NO2

Here, we report on using dark-field microscopy (DFM) as a simple and low-cost imaging platform to visually resolve the kinetics of single cuprous oxide (Cu₂O) microparticles for NO₂ removal in a real-time manner. Unexpectedly, we find that the redox reaction between Cu₂O microparticles and NO₂ is oscillating with the reaction time. Specifically, the oscillatory behavior of single Cu₂O microparticles for NO₂ reduction shows a large particle-to-particle variability, which is also dependent upon the NO₂ pressure and Cu₂O facets. A combined DFM imaging, spectroscopic, scanning electron microscopy, and density functional theory study uncovers that Cu₂O is gradually transformed to copper nitrate hydroxide [Cu₂(NO₃)(OH)₃], and this oscillatory reaction is attributed to the cyclic formation and structural collapse of Cu₂(NO₃)(OH)₃. The present findings open an alternative avenue for probing structure-performance relationships, which are anticipated to benefit the creation of functional materials for air purification.

Lanthanide Ion Resonance-Driven Rayleigh Scattering of Nanoparticles for Dual-Modality Interferometric Scattering Microscopy

Light scattering from nanoparticles is significant in nanoscale imaging, photon confinement. and biosensing. However, engineering the scattering spectrum, traditionally by modifying the geometric feature of particles, requires synthesis and fabrication with nanometre accuracy. Here it is reported that doping lanthanide ions can engineer the scattering properties of low-refractive-index nanoparticles. When the excitation wavelength matches the ion resonance frequency of lanthanide ions, the polarizability and the resulted scattering cross-section of nanoparticles are dramatically enhanced. It is demonstrated that these purposely engineered nanoparticles can be used for interferometric scattering (iSCAT) microscopy. Conceptually, a dual-modality iSCAT microscopy is further developed to identify different nanoparticle types in living HeLa cells. The work provides insight into engineering the scattering features by doping elements in nanomaterials, further inspiring exploration of the geometry-independent scattering modulation strategy.