Ce(3+)-ion-induced visible-light photocatalytic degradation and electrochemical activity of ZnO/CeO2 nanocomposite

Industrial applications of Phanerochaete chrysosporium lignin-degrading enzymes: current status, production challenges, and future directions

Phanerochaete chrysosporium (Pc) is a white-rot fungus recognized for its highly efficient lignin-degrading enzymes (LDEs), including lignin peroxidase (LiP), manganese peroxidase (MnP), and laccase. These oxidative enzymes possess transformative capabilities across multiple industrial applications, such as biopulping, biofuel production, bioremediation and for the treatment of industrial wastewater. However, the commercial use of these enzymes is limited due to time-consuming scale-up procedures in native hosts, instability in industrial environments, and high production costs. The recent developments in recombinant expression systems, particularly those employing microbial and plant platforms provide promising opportunities to enhance enzyme yield, stability, and reduce the cost. Despite these advancements, significant challenges remain, which include the formation of inclusion bodies, the need for nutrient and co-factor supplementation, and the development of effective purification strategies. Modern advancements in protein engineering, such as site-directed mutation and in silico approaches, may hold significant promise in addressing the challenges posed by pH optimization, which is prominent in wild-type enzymes. This review examines the current industrial applications of P. chrysosporium ligninolytic enzymes, highlights production bottlenecks in several hosts, and discusses the strategies to enhance their commercial viability of these enzymes.

A novel ZnO/Fe3+-doped Bi2WO6 photocatalyst with triple synergistic effect for solar-driven tetracycline degradation

To address the limited visible-light absorption and rapid charge recombination of Bi2WO6 photocatalysts, this work constructs a Z-scheme ZnO/Fe3+-doped Bi2WO6 heterojunction via a hydrothermal-calcination method. The Fe3+ doping induces the formation of oxygen vacancies and optimizes the band structure, which cooperates with the interface reconstruction of ZnO to expand the light absorption to 480 nm. The hierarchical pore structure simultaneously enhances the mass transfer efficiency, and finally realizes the efficient degradation of tetracycline under visible light (the removal rate is 95.5% in 60 minutes, and the rate is 2.28 times higher than that of the pure phase) and the stable cycle performance is good. Mechanistic studies demonstrate that Z-scheme charge transfer driven by an interfacial built-in electric field ensures effective carrier separation, with photogenerated holes (h+) as key reactive species. The proposed "defect-heterojunction-interface trinity" strategy establishes a new design scheme for bismuth-based Z-scheme photocatalysts.

Effect of ZnO/EAF slag doping on removal of methyl red dye (MR) from industrial waste water

Zinc oxide doped with EAF slag (ZnO/ EAF slag) nanoparticles in different contents (10, 20) % of waste were synthesized in a controlled and reproducible way using spin-coater. The produced nanomaterial's physicochemical and structural characteristics were ascertained by means of particle size distribution, TEM, SEM, UV-Vis spectroscopy, XRD, FTIR, and XRF. The role and effect of EAF slag with constant percent doping with ZnO on the ability to remove pollutants was determined by observing the methyl red (MR) elimination in an aqueous solution at λmax = 413 nm and MR dye removal concentration was evaluated from its optical density. Irradiation of the compounds in sunlight intensity 250 KW/nh.m2 and temperature 36 °c resulted in a larger degree of MR removal from the solution, resulting in ZnO/EAF slag samples exhibiting increased photo activity. As a conclusion ZnO nanoparticles saturated with 20% EAF slag as a waste material were the most efficient in removing methyl red (MR) achieving ~ 96% removal and a completely transparent solution after 2 h of testing.

The coupled WO3-AgBr nanocatalyst, part II: Synthesis, characterization, and the boosted photocatalytic activity towards metronidazole in an aqueous solution

The AgBr and WO3 nanoparticles (NPs) were synthesized and coupled, and the coupled AgBr-WO3 binary catalyst, as well as the individual AgBr and WO3 NPs, were then characterized by XRD, FTIR, DRS, and SEM-EDX. XRD results showed the formation of orthorhombic WO3 cubic AgBr crystals. The crystallite sizes of 45, 28, and 45 nm were estimated by the Scherrer formula for the as-prepared AgBr, WO3, and AgBr-WO3 catalysts, respectively. The DRS study estimated band gap energies using both absorption edge wavelengths and the Kubelka-Munk model. The band gap energies of 2.72, 3.06, and 2.92 eV were obtained for the direct electronic transitions of AgBr, WO3, and AgBr-WO3. The ECB (potential position) of AgBr and WO3 were estimated to be 0.01 and 0.52 V, while their EVB values were 2.60 and 3.55 V, respectively. Typical FTIR absorption bands of W‒OH, the W‒O‒W, and AgBr bonds have appeared at 1637 cm-1, 823 (and 766) cm-1, and 1384 cm-1, respectively. The pHpzc of 4 was estimated for the individual and coupled catalysts. In studying the photocatalytic activity of the catalysts in the photodegradation of metronidazole (MNZ) a boosted activity was achieved for the coupled system. This increased activity depends on the maximum AgBr:WO3 mole ratio in a 1:3 mol ratio. Grinding time applied to prepare the coupled catalyst has also varied the photocatalytic activity.

Ceria nanoparticles: biomedical applications and toxicity

Ceria nanoparticles (CeO2 NPs) have become popular materials in biomedical and industrial fields due to their potential applications in anti-oxidation, cancer therapy, photocatalytic degradation of pollutants, sensors, etc. Many methods, including gas phase, solid phase, liquid phase, and the newly proposed green synthesis method, have been reported for the synthesis of CeO2 NPs. Due to the wide application of CeO2 NPs, concerns about their adverse impacts on human health have been raised. This review covers recent studies on the biomedical applications of CeO2 NPs, including their use in the treatment of various diseases (e.‍g., Alzheimer's disease, ischemic stroke, retinal damage, chronic inflammation, and cancer). CeO2 NP toxicity is discussed in terms of the different systems of the human body (e.‍g., cytotoxicity, genotoxicity, respiratory toxicity, neurotoxicity, and hepatotoxicity). This comprehensive review covers both fundamental discoveries and exploratory progress in CeO2 NP research that may lead to practical developments in the future.

Advancements in TiO2-based photocatalysis for environmental remediation: Strategies for enhancing visible-light-driven activity

Researchers have focused on efficient techniques for degrading hazardous organic pollutants due to their negative impacts on ecological systems, necessitating immediate remediation. Specifically, TiO2-based photocatalysts, a wide-bandgap semiconductor material, have been extensively studied for their application in environmental remediation. However, the extensive band gap energy and speedy reattachment of electron (e-) and hole (h+) pairs in bare TiO2 are considered major disadvantages for photocatalysis. This review extensively focuses on the combination of semiconducting photocatalysts for commercial outcomes to develop efficient heterojunctions with high photocatalytic activity by minimizing the e-/h+ recombination rate. The improved activity of these heterojunctions is due to their greater surface area, rich active sites, narrow band gap, and high light-harvesting tendency. In this context, strategies for increasing visible light activity, including doping with metals and non-metals, surface modifications, morphology control, composite formation, heterojunction formation, bandgap engineering, surface plasmon resonance, and optimizing reaction conditions are discussed. Furthermore, this review critically assesses the latest developments in TiO2 photocatalysts for the efficient decomposition of various organic contaminants from wastewater, such as pharmaceutical waste, dyes, pesticides, aromatic hydrocarbons, and halo compounds. This review implies that doping is an effective, economical, and simple process for TiO2 nanostructures and that a heterogeneous photocatalytic mechanism is an eco-friendly substitute for the removal of various pollutants. This review provides valuable insights for researchers involved in the development of efficient photocatalysts for environmental remediation.

Doped Ceria Nanomaterials: Preparation, Properties, and Uses

Doping is a powerful strategy for enhancing the performance of ceria (CeO2) nanomaterials in a range of catalytic, photocatalytic, biomedical, and energy applications. The present review summarizes recent developments in the doping of ceria nanomaterials with metal and non-metal dopants for selected applications. The most important metal dopants are grouped into s, p, d, and f block elements, and the relevant synthetic methods, novel properties, and key applications of metal doped ceria are collated and critically discussed. Non-metal dopants are similarly examined and compared with metal dopants using the same performance criteria. The review reveals that non-metal (N, S, P, F, and Cl) doped ceria has mainly been synthesized by calcination and hydrothermal methods, and it has found applications mostly in photocatalysis or as a cathode material for LiS batteries. In contrast, metal doped ceria nanomaterials have been prepared by a wider range of synthetic routes and evaluated for a larger number of applications, including as catalysts or photocatalysts, as antibacterial agents, and in devices such as fuel cells, gas sensors, and colorimetric detectors. Dual/co-doped ceria containing both metals and non-metals are also reviewed, and it is found that co-doping often leads to improved properties compared with single-element doping. The review concludes with a future outlook that identifies unaddressed issues in the synthesis and applications of doped ceria nanomaterials.

Facile Fabrication of Highly Active CeO2@ZnO Nanoheterojunction Photocatalysts

Photocatalyst performance is often limited by the poor separation and rapid recombination of photoinduced charge carriers. A nanoheterojunction structure can facilitate the separation of charge carrier, increase their lifetime, and induce photocatalytic activity. In this study, CeO₂@ZnO nanocomposites were produced by pyrolyzing Ce@Zn metal-organic frameworks prepared from cerium and zinc nitrate precursors. The effects of the Zn:Ce ratio on the microstructure, morphology, and optical properties of the nanocomposites were studied. In addition, the photocatalytic activity of the nanocomposites under light irradiation was assessed using rhodamine B as a model pollutant, and a mechanism for photodegradation was proposed. With the increase in the Zn:Ce ratio, the particle size decreased, and surface area increased. Furthermore, transmission electron microscopy and X-ray photoelectron spectroscopy analyses revealed the formation of a heterojunction interface, which enhanced photocarrier separation. The prepared photocatalysts show a higher photocatalytic activity than CeO₂@ZnO nanocomposites previously reported in the literature. The proposed synthetic method is simple and may produce highly active photocatalysts for environmental remediation.

Aluminium doped ZnO nanostructures for efficient photodegradation of indigo carmine and azo carmine G in solar irradiation

Aluminium doped zinc oxide (AZO) nanomaterials (AlxZn1-xO) with x fraction varying as 0.02 and 0.04 were synthesized using the auto-combustion method using glycine as a fuel. The synthesized catalysts were characterized with X-ray diffraction (XRD), UV–Visible Spectroscopy (UV–Vis), Raman spectroscopy, Photoluminescence (PL) spectroscopy, and High Resolution Transmission Electron Microscopy (HR-TEM). XRD results showed that synthesized materials possessed good crystallinity, while UV–VIS was employed to find the band gaps of synthesized materials. Raman was used to determine the vibrational modes in the synthesized nanoparticles, while TEM analysis was performed to study the morphology of the samples. Industrial effluents such as indigo carmine and azo carmine G were used to test the photodegradation ability of synthesised catalysts. Parameters such as the effect of catalyst loading, dye concentration and pH were studied. The reduction in crystallite size, band gap and increased lattice strain for the 4% AZO was the primary reason for the degradation in visible irradiation, degrading 97 and 99% equimolar concentrations of indigo carmine and azo carmine G in 140 min. The Al doped ZnO was found to be effective in faster degradation of dyes as compared to pure ZnO in presence of natural sunlight.

Photocatalytic degradation of Reactive Black dye using ZnO-CeO2 nanocomposites

This study presents the photocatalytic efficiency of ZnO-CeO₂ nanocomposites for the degradation of a model Reactive Black (RB) dye. Nano-CeO₂ was synthesized using cerium nitrate precursor solution via chemical precipitation. Synthesized nano-CeO₂ was mixed with ZnO nanoparticles in different mass ratios to obtain ZnO-CeO₂ heterojunction photocatalyst. The morphology of the nanocomposites was examined using transmission electron microscope (TEM). X-ray diffraction patterns of the CeO₂ corresponded well with (1 1 1) plane of cubic-phase CeO₂. The band gap of the ZnO-CeO₂ nanocatalyst synthesized was determined to be 3.08 eV, which was lower than that of the pristine CeO₂ and ZnO powders, respectively. The results indicate that 1:1 wt. ratio ZnO-CeO₂ nanocomposite provides about 85% RB degradation within 90 min under UV light under alkaline pH conditions. Degradation rate of RB dye achieved with ZnO-CeO₂ nanocomposite was almost 1.5 times greater than that obtained with pristine ZnO. Increasing CeO₂ ratio beyond 1:1 wt. ratio did not significantly increase RB degradation. The results demonstrate that addition of CeO₂ to ZnO results in lowering its band gap energy and aids charge carrier separation resulting in enhanced oxidation of RB dye under UV light.

Antimicrobial, anticancer and immunomodulatory potential of new quinazolines bearing benzenesulfonamide moiety

Sulfonamides are privileged candidates with potent anti-methicillin-resistant Staphylococcus aureus (MRSA) activity and could replenish the MRSA antibiotic pipeline. The initial screening of a series of quinazolinone benzenesulfonamide derivatives 5-18 against multidrug-resistant bacterial and fungal strains revealed their potent activity. The promising compounds were conjugated with ZnONPs to study the effect of nanoparticle formation on the antimicrobial, cytotoxic and immunomodulatory activity. Compounds 5, 11, 16 and 18 revealed promising antimicrobial and cytotoxic activities with superior safety profiles and enhanced activity upon nanoformulation. The immunomodulatory potential of compounds 5, 11, 16 and 18 was assessed. Compounds 5 and 11 demonstrated an increase in spleen and thymus weight and boosted the activation of CD4⁺ and CD8⁺ T lymphocytes, confirming their promising antimicrobial, cytotoxic and immunomodulatory activity.

Highly operative NiO/ZnO nanocomposites for photocatalytic removal of azo dye

The far-reaching technology of semiconductors in treating water pollutants reduces serious health hazards to humans and other eco-systems. With this interpretation, this work is attempted for the first time to synthesize nanosized pristine NiO and ZnO materials, and NiO/ZnO (70:30, 50:50) composites by co-precipitation method. The synthesized materials were then portrayed for their properties using various instrumental techniques such as X-ray diffraction (XRD), Transmission electron microscope (TEM), Energy dispersive X-ray spectrum (EDXS), Fourier transform Infrared spectrum (FT-IR). The main approach of this work is connected with the ultra violet (UV) photocatalytic degradation of MO (methyl orange) by employing the synthesized nanomaterials as catalysts. In view of results, the photocatalytic degradation of NiO/ZnO (70:30) has reported the greatest efficiency than the other catalysts. This outcome lies with the consideration of higher content of NiO present in the composite than ZnO. Further, there was the existence of higher surface area analysed from the BET result. Also, the NiO/ZnO (50:50) sample showed lower degradation efficiency in terms of formed agglomeration when surveyed through TEM. Besides, the positive mechanism of photocatalysis reaction forms the essential hydroxyl radicals which correspond to MO degradation. Moreover, the highly efficient NiO/ZnO (70:30) sample has been trialled for photocatalytic repetition process to observe the stability of degradation. It has accounted with good efficiency for 5 repeated cycles. Finally for UV degradation, the recognized photocatalytic aspect was due to the surface morphology enhanced surface area, synergistic effects of metal oxides and electron-hole charge separation.

LiXO2(X = Co, Rh, Ir) and solar light photocatalytic water splitting for hydrogen generation

Alkali metal transition oxide LiCoO₂ has been successfully commercialized as a lithium-ion battery material, and some attention is paid to its homologous derivatives LiRhO₂ and LiIrO₂. However, the photocatalytic properties have not been explored yet for these compounds. Using the first-principles calculations, we carry out investigations on the electronic properties, light absorption, and mobility to understand the feasibility of LiXO₂(X = Co, Rh, Ir) for solar light photocatalytic hydrogen generation from water-splitting. The results show that the band edges of LiCoO₂ and LiRhO₂ meet the redox potential requirements of the water-splitting hydrogen evolution reaction. In addition, the enhanced absorptions of LiXO₂(X = Co, Rh, Ir) in the visible light range imply that they could well respond to solar light, while the significant difference in the mobilities of electrons or holes can strengthen spatial charge separation of the photoexcited electron-hole pairs. The solar-energy-to-hydrogen conversion efficiencies of LiCoO₂ and LiRhO₂ can reach 11.2% and 15.5%, respectively. The results support LiCoO₂ and LiRhO₂ as promising candidates for visible-light photocatalytic hydrogen production from water-splitting.

Fabrication of CeO2/GCE for Electrochemical Sensing of Hydroquinone

Hydroquinone is a widely used derivative of phenol which has a negative influence on human beings and the environment. The determination of the accurate amount of hydroquinone is of great importance. Recently, the fabrication of an electrochemical sensing device has received enormous attention. In this study, we reported on the facile synthesis of cerium dioxide (CeO₂) nanoparticles (NPs). The CeO₂ NPs were synthesized using cerium nitrate hexahydrate as a precursor. For determining the physicochemical properties of synthesized CeO₂ NPs, various advanced techniques, viz., powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS), were studied. Further, these synthesized CeO₂ NPs were used for the modification of a glassy carbon electrode (CeO₂/GCE), which was utilized for the sensing of hydroquinone (HQ). A decent detection limit of 0.9 µM with a sensitivity of 0.41 µA/µM cm² was exhibited by the modified electrode (CeO₂/GCE). The CeO₂/GCE also exhibited good stability, selectivity, and repeatability towards the determination of HQ.

Ce3+/Ce4+-Doped ZrO2/CuO Nanocomposite for Enhanced Photocatalytic Degradation of Methylene Blue under Visible Light

In recent years, photocatalysis has been used as an environmentally friendly method for the degradation of organic pigments in water. In this study, Ce³⁺/Ce⁴⁺-doped ZrO₂/CuO as a mixed semiconductor oxide was successfully prepared by a one-step hydrothermal method. The Ce³⁺/Ce⁴⁺-doped ZrO₂/CuO has shown high degradation efficiency of methylene blue (MB), and the maximum degradation percentage was observed to be 94.5% at 180 min under irradiation visible light. The photocatalytic activity increases significantly by doping Ce³⁺/Ce⁴⁺ in ZrO₂/CuO for MB degradation. Ce³⁺/Ce⁴⁺ doping is shown to reduce the (e^-/h⁺) recombination rate and improve the charge transfer, leading to enhanced photocatalytic activity of materials. The materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), FTIR, EDS, BET and diffuse reflectance spectroscopy (DRS).

Influence of Fe and Cu Co-Doping on Structural, Magnetic and Electrochemical Properties of CeO2 Nanoparticles

The nanoparticles of CeO₂, Ce_0.98Fe_0.02O₂, and Ce_0.78Fe_0.02Cu_0.20O₂ were synthesized using the co-precipitation-synthesis technique. The effect of co-doping of Fe and Cu on structural, optical, and magnetic properties as well as specific capacitance have been studied using X-ray diffraction (XRD), scanning-electron microscopy (SEM), UV-visible spectroscopy, Raman spectroscopy, dc magnetization, and electrochemical measurements at room temperature. The results of the XRD analysis infer that all the samples have a single-phase nature and exclude the formation of any extra phase. Particle size has been found to reduce as a result of doping and co-doping. The smallest particle size was obtained to be 5.59 nm for Ce_0.78Fe_0.02Cu_0.20O₂. The particles show a spherical-shape morphology. Raman active modes, corresponding to CeO₂, were observed in the Raman spectra, with noticeable shifting with doping and co-doping indicating the presence of defect states. The bandgap, calculated using UV-Vis spectroscopy, showed relatively low bandgap energy (1.7 eV). The dc magnetization results indicate the enhancement of the magnetic moment in the samples, with doping and co-doping. The highest value of saturation magnetization (1.3 × 10^-2 emu/g) has been found for Ce_0.78Fe_0.02Cu_0.20O₂ nanoparticles. The electrochemical behavior studied using cyclic-voltammetry (CV) measurements showed that the Ce_0.98Fe_0.02O₂ electrode exhibits superior-specific capacitance (~532 F g^-1) along with capacitance retention of ~94% for 1000 cycles.

Ceria nanoparticles anchored on graphitic oxide sheets (CeO2-GOS) as an efficient catalyst for degradation of dyes and textile effluents

Herein, we report a Ceria-graphitic oxide sheets (CeO₂-GOS) nanocomposites photo catalyst synthesized by simple and green methods for the degradation of textile effluents and dyes. In the first step, green treated CeO₂ NPs were synthesized through a simple organic reduction method. Further, green synthesized CeO₂ NPs were anchored with GOS to produce CeO₂-GOS nanocomposites by a sol-gel method. The phase morphology and structure of CeO₂-GOS nanocomposites was systematically characterized through X-ray diffraction, Raman spectroscopy, zeta potential, Fourier transform infrared spectroscopy (FT-IR), High-Resolution Transmission Electron Microscope (HR-TEM), and X-ray photoelectron spectroscopy (XPS) analysis. Under visible light irradiation, the CeO₂-GOS nanocomposites photo catalyst exhibited 83%, 78%, and 70% degradation efficiencies for rhodamine B, methylene blue, and textile effluent, respectively. Due to the synergistic impact of GO, it act as an elastic conductive channel permitting improved charge transport, the fabricated CeO₂-GOS nanocomposites showed a significant retort to photo catalysis of rhodamine B, methylene blue, and textile effluent. CeO₂-GOS nanocomposites may yield unique insight into the synthesis of green nanocomposites and their application in environmental remediation due to their better photo catalytic activity.

Orange peel extract influenced partial transformation of SnO2 to SnO in green 3D-ZnO/SnO2 system for chlorophenol degradation

In recent times, visible light enhancement has become much more considered due to the enlightening properties of nanocomposite systems. This has potential applications for wastewater treatment due to the blemish of toxic organic chemicals from industrial sectors. Therefore, this work is focused on novel 3D ZnO/SnO₂ nanocomposites synthesized by the green method (orange peel extracts supported combined chemical processes) utilized for the removal of chlorophenol effluent. The orange peel extract has been incorporated as one of the major components to synthesize an effective nanocomposite. Also, the pure materials were synthesized along with these nanocomposites and tested under various instrumental techniques. The characterized results showed that the composites prepared with orange peel extract exhibited hexagonal 3D ZnO nanospheres with 3D tetragonal structured SnO₂ nanocubes. Elemental analysis showed that the partial amount of SnO₂ has transformed to SnO due to the reducing ability of orange peel extract. Also, the existing different (Zn²⁺, Sn⁴⁺, and Sn²⁺) states helped in delaying the transfer of electron-hole recombination to obtain photocatalytic chlorophenol degradation. Further, the prevailing line dislocation can compromise more vacancy and interact with more electrons. The high surface area, least crystallite size, and lower bandgap inspired to enhance the visible light activity. Simultaneously, the pure form of nanomaterial has poor light absorption under visible light. This study achieves the photocatalytic degradation of 77.5% against chlorophenol using a green 3D composite system.

TiO2-CeO2/g-C3N4 S-scheme heterostructure composite for enhanced photo-degradation and hydrogen evolution performance with combined experimental and DFT study

The g-C₃N₄/TiO₂ nanocomposites (NCs) are fabricated by optimization of calcination and subsequent hydrothermal technique decorated with CeO₂ nanoparticles (NPs) to build the g-C₃N₄/TiO₂-CeO₂ hybrid NCs. The chemical and surface characterizations of structural, morphological, elemental composition, optical, photo-degradation, HER performance and the DFT computation has been efficiently analyzed. The g-C₃N₄/TiO₂-CeO₂ composite photocatalysts (PCs) exhibit photocatalytic improved performance (∼97 %) for MB aqueous dye related to pristine g-C₃N₄ and g-C₃N₄/TiO₂ composite PCs. The obtained k value of the g-C₃N₄/TiO₂/CeO₂ heterostructure composite PCs has around 0.0262 min^-1 and 6.1, 2.6 and 1.5 times higher than to g-C₃N₄ (0.0043 min^-1), g-C₃N₄/CeO₂ (0.0099 min^-1) and g-C₃N₄/TiO₂ (0.0180 min^-1) PCs respectively. Likewise, the synergistic probable S-scheme charge separation mechanism based on scavengers' tests and other values, which leads to effective separation of photo-excited (e^--h⁺) pairs, whereas high degradation and more H₂O molecules have photo-reduction to H₂. The H₂ evolution reaction (HER) and the electrochemical impedance spectroscopy (EIS) of the as-obtained samples were explored via electrochemical study. This exertion recommends that the rational strategy and building of g-C₃N₄/TiO₂-CeO₂ nano-heterostructures were beneficial for developing visible-light-driven recyclable PCs for ecological refinement.

Review on Methylene Blue: Its Properties, Uses, Toxicity and Photodegradation

The unavailability of clean drinking water is one of the significant health issues in modern times. Industrial dyes are one of the dominant chemicals that make water unfit for drinking. Among these dyes, methylene blue (MB) is toxic, carcinogenic, and non-biodegradable and can cause a severe threat to human health and environmental safety. It is usually released in natural water sources, which becomes a health threat to human beings and living organisms. Hence, there is a need to develop an environmentally friendly, efficient technology for removing MB from wastewater. Photodegradation is an advanced oxidation process widely used for MB removal. It has the advantages of complete mineralization of dye into simple and nontoxic species with the potential to decrease the processing cost. This review provides a tutorial basis for the readers working in the dye degradation research area. We not only covered the basic principles of the process but also provided a wide range of previously published work on advanced photocatalytic systems (single-component and multi-component photocatalysts). Our study has focused on critical parameters that can affect the photodegradation rate of MB, such as photocatalyst type and loading, irradiation reaction time, pH of reaction media, initial concentration of dye, radical scavengers and oxidising agents. The photodegradation mechanism, reaction pathways, intermediate products, and final products of MB are also summarized. An overview of the future perspectives to utilize MB at an industrial scale is also provided. This paper identifies strategies for the development of effective MB photodegradation systems.

Rare-Earth Doping in Nanostructured Inorganic Materials

Impurity doping is a promising method to impart new properties to various materials. Due to their unique optical, magnetic, and electrical properties, rare-earth ions have been extensively explored as active dopants in inorganic crystal lattices since the 18th century. Rare-earth doping can alter the crystallographic phase, morphology, and size, leading to tunable optical responses of doped nanomaterials. Moreover, rare-earth doping can control the ultimate electronic and catalytic performance of doped nanomaterials in a tunable and scalable manner, enabling significant improvements in energy harvesting and conversion. A better understanding of the critical role of rare-earth doping is a prerequisite for the development of an extensive repertoire of functional nanomaterials for practical applications. In this review, we highlight recent advances in rare-earth doping in inorganic nanomaterials and the associated applications in many fields. This review covers the key criteria for rare-earth doping, including basic electronic structures, lattice environments, and doping strategies, as well as fundamental design principles that enhance the electrical, optical, catalytic, and magnetic properties of the material. We also discuss future research directions and challenges in controlling rare-earth doping for new applications.

A systematic review on iron-based nanoparticle-mediated clean-up of textile dyes: challenges and prospects of scale-up technologies

The projected increase of the global textile industry to USD1002.84 billion in 2027 indicates a simultaneous increase in water pollution due to textile dye-rich voluminous effluents highlighting the requirement of source clean-up. This review analyzes the colossal amount of literature on lab-scale nanoremediation technologies involving iron-based nanoparticles and the mechanistic aspects. However, not many studies are in place with regard to execution because there are several bottlenecks in the scale-up of the technology. This review attempts to identify the limitations of scale-up by focusing on each step of nanoremediation from synthesis of iron-based nanoparticles to their applications. The most prominent appears to be the low economic viability of physico-chemical synthesis of nanoparticles, lack of appropriate toxicity studies of iron-based nanoparticles, and dearth of studies on field applications. It is recommended that above studies should be made not only on lab scale but also on field samples preferably utilizing microbial products based green synthesized iron-based nanoparticles and conducting toxicity studies. Besides, immobilization of the nanoparticles on renewable material greatly enhances the sustainability and economic value of the process. Furthermore, since the chemical composition of dye-rich effluents varies among industries, effluent specific optimization of process parameters and kinetics thereof is also a major prerequisite for scale-up. The value of this review lies in the fact that it brings, for the first time, a comprehensive and critical systematization of various aspects needing attention in order to scale-up such effective nanoremediation processes.

Structural and Functional Behaviour of Ce-Doped Wide-Bandgap Semiconductors for Photo-Catalytic Applications

Increasing the photocatalytic efficiency of earth-abundant wide-bandgap semiconductors is of high interest for the development of cheap but effective light-driven chemical conversion processes. In this study, the coupling of ZnO and TiO2 with low contents of the rare-earth Ce species aimed to assess the photo-catalytic performance of the two semiconductors (SC). Structural and optical characterizations were performed to estimate the effect of the different interactions between Zn2+, Ti4+ and Ce4+ ions, and how the photo-responsive behaviour of Ce-Ti and Ce-Zn composites was affected. Therefore, photo-catalytic tests were performed for all Ce-modified SC to assess both their photo-oxidative and photo-reductive properties. Amongst all the tested materials, only Zn-based samples resulted in being suitable for the photo-oxidation of the methylene blue (MB) organic pollutant in a synthetic-dependent fashion.

Photocatalytic Dye Degradation and Biological Activities of Cu-Doped ZnSe Nanoparticles and Their Insights

Environmental nanotechnology has received much attention owing to its implications on environmental ecosystem, and thus is promising for the elimination of toxic elements from the aquatic surface. This work focuses on Cu-doped ZnSe nanoparticles using the co-precipitation method. The synthesized Cu-doped ZnSe nanoparticles were examined for structural, optical, and morphological properties with the help of XRD, FTIR, UV/vis diffuse reflection spectroscopy (DRS), FESEM, TEM, and XPS. The synthesized Cu-doped ZnSe nanoparticles revealed the presence of Cu2+ in the ZnSe lattice, which has been shown to take a predominant role for enhanced catalysis in the Cu-doped ZnSe nanoparticles. The synthesized Cu-doped ZnSe nanoparticles were investigated for their catalytic and antibacterial activities. The 0.1 M copper-doped ZnSe nanoparticles exhibited the highest rate of degradation against the methyl orange dye, which was found to be 87%. A pseudo-first-order kinetics was followed by Cu-doped ZnSe nanoparticles with a rate constant of 0.1334 min−1. The gram-positive and gram-negative bacteria were used for investigating the anti-bacterial activity of the Cu-doped ZnSe nanoparticles. The Cu-doped ZnSe nanoparticles exhibited enhanced photocatalytic and antibacterial activity.

Transformation of CuS/ZnS nanomaterials to an efficient visible light photocatalyst by 'photosensitizer' graphene and the potential antimicrobial activities of the nanocomposites

We report the growth of CuS/ZnS (CZS) nanoparticles (NPs) on the graphene sheet by a facile green synthesis process. The CuS/ZnS-graphene (CZSG) nanocomposites exhibit enhanced visible light photocatalytic activity towards organic dye (methylene blue) degradation than that of CZS nanoparticles. To find the reason for the enhanced photo-activity, we propose a new photocatalytic mechanism where graphene in the CZSG nanocomposites acts as a 'photosensitizer' for CZS nanoparticles. This distinctive photocatalytic mechanism is noticeably different from all other previous research works on semiconductor-graphene hybrid photocatalysts where graphene behaves as an electron reservoir to capture the electrons from photo-excited semiconductor. This novel idea of the photocatalytic mechanism in semiconductor-graphene photocatalysts could draw a new track in thinking for designing of graphene-based photocatalysts for solving environmental pollution problems and they also show remarkable antimicrobial activities.

Amorphous Fe(OH)3 Passivating CeO2 Nanorods: A Noble-Metal-Free Photocatalyst for Water Oxidation

Noble-metal-free composites with good photocatalytic property are of great interest. Here, CeO₂ nanorods composites loaded with amorphous Fe(OH)₃ cocatalyst were designed and prepared via a secondary water bath at 100 °C. The as-synthesized CeO₂ /amorphous Fe(OH)₃ composites exhibited superior light photocatalytic activities compared to pure CeO₂ , especially the sample with a loading time of 60 min. The photocatalytic oxygen generation rate could reach to 357.2 μmol h^-1  g^-1 , and the average apparent quantum yield (AQY) was 24.67 %, which was a 5.5-fold increase compared to the CeO₂ sample. The improvement of photocatalytic performance could be ascribed to three main reasons: First, loading the amorphous Fe(OH)₃ enlarged the specific surface area and passivated the surface of the pristine CeO₂ . Second, the amorphous Fe(OH)₃ ,which acted as a cocatalyst, provided many active sites, and reduced the reaction activation energy. Thirdly, the maximum interface with intimate contact between CeO₂ and amorphous Fe(OH)₃ cocatalyst accelerated the photogenerated charge separation efficiency and thus improved the photocatalytic performance of CeO₂ in photocatalytic water oxidation.

Green-synthesized CeO2 nanoparticles for photocatalytic, antimicrobial, antioxidant and cytotoxicity activities

Cerium oxide nanoparticles (CeO2 NPs) are a sought-after material in numerous fields due to their potential applications such as in catalysis, cancer therapy, photocatalytic degradation of pollutants, sensors, polishing agents. Green synthesis usually involves the production of CeO2 assisted by organic extracts obtained from plants, leaves, flowers, bacteria, algae, food, fruits, etc. The phytochemicals present in the organic extracts adhere to the NPs and act as reducing and/or oxidizing agents and capping agents to stabilize the NPs, modify the particle size, morphology and band gap energy of the as-synthesized materials, which would be advantageous for numerous applications. This review focuses on the green extract-mediated synthesis of CeO2 NPs and discusses the effects on CeO2 NPs of various synthesis methods that have been reported. Several photocatalytic, antimicrobial, antioxidant and cytotoxicity applications have been evaluated, compared and discussed. Future prospects are also suggested.

Cobalt doped nano-hydroxyapatite incorporated gum tragacanth-alginate beads as angiogenic-osteogenic cell encapsulation system for mesenchymal stem cell based bone tissue engineering

Angiogenic-osteogenic cell encapsulation system is a technical need for human mesenchymal stem cell (hMSC)-based bone tissue engineering (BTE). Here, we have developed a highly efficient hMSC encapsulation system by incorporating bivalent cobalt doped nano-hydroxyapatite (HAN) and gum tragacanth (GT) as angiogenic-osteogenic components into the calcium alginate (CA) beads. Physico-chemical characterizations revealed that the swelling and degradation of HAN incorporated CA-GT beads (GT-HAN) were 1.34 folds and 2 folds higher than calcium alginate (CA) beads. Furthermore, the diffusion coefficient of solute molecule was found 2.5-fold higher in GT-HAN with respect to CA bead. It is observed that GT-HAN supports the long-term viability of encapsulated hMSC and causes 50% less production of reactive oxygen species (ROS) in comparison to CA beads. The expression of osteogenic differentiation markers was found 1.5-2.5 folds higher in the case of GT-HAN in comparison to CA. A similar trend was observed for hypoxia inducible factor 1 alpha (HIF-1α) and vascular endothelial growth factor (VEGF). The soluble secretome from hMSC encapsulated in the GT-HAN induced proliferation of endothelial cells and supported tube formation (2.5-fold higher than CA beads). These results corroborated that GT-HAN could be used as an angiogenic-osteogenic cell encapsulation matrix for hMSC encapsulation and BTE application.