Critical review: cellular mechanobiology and amoeboid migration

Computational modeling of multiple myeloma interactions with resident bone marrow cells

The interaction of multiple myeloma with bone marrow resident cells plays a key role in tumor progression and the development of drug resistance. The tumor cell response involves contact-mediated and paracrine interactions. The heterogeneity of myeloma cells and bone marrow cells makes it difficult to reproduce this environment in in-vitro experiments. The use of in-silico established tools can help to understand these complex problems. In this article, we present a computational model based on the finite element method to define the interactions of multiple myeloma cells with resident bone marrow cells. This model includes cell migration, which is controlled by stress-strain equilibrium, and cell processes such as proliferation, differentiation, and apoptosis. A series of computational experiments were performed to validate the proposed model. Cell proliferation by the growth factor IGF-1 is studied for different concentrations ranging from 0-10 ng/mL. Cell motility is studied for different concentrations of VEGF and fibronectin in the range of 0-100 ng/mL. Finally, cells were simulated under a combination of IGF-1 and VEGF stimuli whose concentrations are considered to be dependent on the cancer-associated fibroblasts in the extracellular matrix. Results show a good agreement with previous in-vitro results. Multiple myeloma growth and migration are shown to correlate linearly to the IGF-1 stimuli. These stimuli are coupled with the mechanical environment, which also improves cell growth. Moreover, cell migration depends on the fiber and VEGF concentration in the extracellular matrix. Finally, our computational model shows myeloma cells trigger mesenchymal stem cells to differentiate into cancer-associated fibroblasts, in a dose-dependent manner.

The interface stiffness and topographic feature dictate interfacial invasiveness of cancer spheroids

During cancer metastasis, tumor cells likely navigate, in a collective manner, discrete tissue spaces comprising inherently heterogeneous extracellular matrix microstructures where interfaces may be frequently encountered. Studies have shown that cell migration modes can be determined by adaptation to mechanical/topographic cues from interfacial microenvironments. However, less attention has been paid to exploring the impact of interfacial mechnochemical attributes on invasive and metastatic behaviors of tumor aggregates. Here, we excogitated a collagen matrix-solid substrate interface platform to investigate the afore-stated interesting issue. Our data revealed that stiffer interfaces stimulated spheroid outgrowth by motivating detachment of single cells and boosting their motility and velocity. However, stronger interfacial adhesive strength between matrix and substrate led to the opposite outcomes. Besides, this interfacial parameter also affected the morphological switch between migration modes of the detached cells and their directionality. Mechanistically, myosin II-mediated cell contraction, compared to matrix metalloproteinases-driven collagen degradation, was shown to play a more crucial role in the invasive outgrowth of tumor spheroids in interfacial microenvironments. Thus, our findings highlight the importance of heterogeneous interfaces in addressing and combating cancer metastasis.

Application of optical tweezers in cardiovascular research: More than just a measuring tool

Recent advances in the field of optical tweezer technology have shown intriguing potential for applications in cardiovascular medicine, bringing this laboratory nanomechanical instrument into the spotlight of translational medicine. This article summarizes cardiovascular system findings generated using optical tweezers, including not only rigorous nanomechanical measurements but also multifunctional manipulation of biologically active molecules such as myosin and actin, of cells such as red blood cells and cardiomyocytes, of subcellular organelles, and of microvessels in vivo. The implications of these findings in the diagnosis and treatment of diseases, as well as potential perspectives that could also benefit from this tool, are also discussed.

Exploiting Substrate Cues for Co-Culturing Cells in a Micropattern

Spatial distribution of cells and their interactions between neighboring cells in native microenvironments are of fundamental importance in determining cell fate decisions such as migration, growth, and differentiation. Controlling the spatial distribution of different cell types in defined geometries can replicate these native environments, which can be a useful model for several studies. While spatiotemporal control over multiple cell arrangements is required to achieve the complex tissue architecture, unfortunately, conventional cell patterning techniques usually allow only single patterning with a single cell type. In the present study, we introduce a simple lithographic method to pattern multiple cell types in a spatially controlled manner by utilizing the biophysical cues present at the corners of the patterned geometry. By fabricating micropatterns of different shapes, we demonstrate how the cell can be constrained to pattern along the corners of patterned geometries owing to the presence of topographical cues, leaving empty voids in the center that can be further utilized for patterning a second cell type. We also demonstrate that the cell alignment along the pattern is a dynamic process and the cells migrate from a more uniform cell-adhesive region toward the topographical cues. The cytoskeleton arrangement was geometry-dependent, which was confirmed through a series of in vitro evaluations, such as scanning electron microscopy and fluorescence microscopy. These findings have not only helped us in exploring the importance of these cues in guiding the cell fate but have also allowed us to develop a technique, which self-patterns the cells without any expensive exogenous cues and can be used as a model protocol to eventually organize cells into a specific pattern with micron-scale precision in vitro.

Migration of immortalized nasopharyngeal epithelia and carcinoma cells through porous membrane in 3D platforms

In the present study, 3D biomimetic platforms were fabricated with guiding grating to mimic extracellular matrix topography, porous membrane to resemble the epithelial porous interface and trenches below to represent blood vessels as an in vitro tissue microenvironment. Fabrication technologies were developed to integrate the transparent biocompatible polydimethylsiloxane platforms with preciously controlled dimensions. Cell migration behaviors of an immortalized nasopharyngeal epithelial cell line (NP460) and a nasopharyngeal carcinoma cell line (NPC43) were studied on the 2D and 3D platforms. The NP460 and NPC43 cells traversing through the porous membrane and migrating in the trenches below were studied by time-lapse imaging. Before traversing through the pores, NP460 and NPC43 cells migrated around the pores but NPC43 cells had a lower migration speed with less lamellipodia spreading. After traversing to trenches below, NPC43 cells moved faster with an alternated elongated morphology (mesenchymal migration mode) and round morphology (amoeboid migration mode) compared with only mesenchymal migration mode for NP460 cells. The cell traversing probability through porous membrane on platforms with 30 μm wide trenches below was found to be the highest when the guiding grating was perpendicular to the trenches below and the lowest when the guiding grating was parallel to the trenches below. The present study shows important information on cell migration in complex 3D microenvironment with various dimensions and could provide insight for pathology and treatment of nasopharyngeal carcinoma.

A Cellular Potts Model for Analyzing Cell Migration across Constraining Pillar Arrays

Cell migration in highly constrained environments is fundamental in a wide variety of physiological and pathological phenomena. In particular, it has been experimentally shown that the migratory capacity of most cell lines depends on their ability to transmigrate through narrow constrictions, which in turn relies on their deformation capacity. In this respect, the nucleus, which occupies a large fraction of the cell volume and is substantially stiffer than the surrounding cytoplasm, imposes a major obstacle. This aspect has also been investigated with the use of microfluidic devices formed by dozens of arrays of aligned polymeric pillars that limit the available space for cell movement. Such experimental systems, in particular, in the designs developed by the groups of Denais and of Davidson, were here reproduced with a tailored version of the Cellular Potts model, a grid-based stochastic approach where cell dynamics are established by a Metropolis algorithm for energy minimization. The proposed model allowed quantitatively analyzing selected cell migratory determinants (e.g., the cell and nuclear speed and deformation, and forces acting at the nuclear membrane) in the case of different experimental setups. Most of the numerical results show a remarkable agreement with the corresponding empirical data.

Separation of nasopharyngeal epithelial cells from carcinoma cells on 3D scaffold platforms

Scaffold microstructures were developed to mimic a three-dimensional extracellular matrix in studying cell migration and invasion. The multiple-layer scaffold platforms were designed to investigate cell migration and separation from top to bottom layer. Two cell lines including immortalized nasopharyngeal epithelial (NP460) cells and nasopharyngeal carcinoma (NPC43) cells with Epstein-Barr virus were compared in this study. On one-layer platforms with trench depth of 15 µm, both NP460 and NPC43 cells were guided to migrate along the 18-µm-wide trenches, and exhibited random migration directions when the trench width was 10 or 50 µm. Nearly no cell was found to migrate in the 10-µm-wide trenches on one-layer platforms. However, the NP460 and NPC43 cells showed very different probability in the narrow trenches on two-layer platforms, making it possible to separate the nasopharyngeal epithelial cells from the carcinoma cells. Moreover, 1-µm deep grating topography on the top layer inhibited NP460 cells to migrate from top ridges to the 10-µm-wide trenches, but promoted such behavior for NPC43 cells. The results demonstrated in This study suggest that the engineered multiple-layer scaffold platforms could be used to separate carcinoma cells in NPC tumor as a potential treatment of NPC.

Mechanical Adaptability of Tumor Cells in Metastasis

The most dangerous aspect of cancer lies in metastatic progression. Tumor cells will successfully form life-threatening metastases when they undergo sequential steps along a journey from the primary tumor to distant organs. From a biomechanics standpoint, growth, invasion, intravasation, circulation, arrest/adhesion, and extravasation of tumor cells demand particular cell-mechanical properties in order to survive and complete the metastatic cascade. With metastatic cells usually being softer than their non-malignant counterparts, high deformability for both the cell and its nucleus is thought to offer a significant advantage for metastatic potential. However, it is still unclear whether there is a finely tuned but fixed mechanical state that accommodates all mechanical features required for survival throughout the cascade or whether tumor cells need to dynamically refine their properties and intracellular components at each new step encountered. Here, we review the various mechanical requirements successful cancer cells might need to fulfill along their journey and speculate on the possibility that they dynamically adapt their properties accordingly. The mechanical signature of a successful cancer cell might actually be its ability to adapt to the successive microenvironmental constraints along the different steps of the journey.

(De)form and Function: Measuring Cellular Forces with Deformable Materials and Deformable Structures

The ability for biological cells to produce mechanical forces is important for the development, function, and homeostasis of tissue. The measurement of cellular forces is not a straightforward task because individual cells are microscopic in size and the forces they produce are at the nanonewton scale. Consequently, studies in cell mechanics rely on advanced biomaterials or flexible structures that permit one to infer these forces by the deformation they impart on the material or structure. Herein, the scientific progression on the use of deformable materials and deformable structures to measure cellular forces are reviewed. The findings and insights made possible with these approaches in the field of cell mechanics are summarized.

Colloidal crystals of compliant microgel beads to study cell migration and mechanosensitivity in 3D

Tissues are defined not only by their biochemical composition, but also by their distinct mechanical properties. It is now widely accepted that cells sense their mechanical environment and respond to it. However, studying the effects of mechanics in in vitro 3D environments is challenging since current 3D hydrogel assays convolve mechanics with gel porosity and adhesion. Here, we present novel colloidal crystals as modular 3D scaffolds where these parameters are principally decoupled by using monodisperse, protein-coated PAAm microgel beads as building blocks, so that variable stiffness regions can be achieved within one 3D colloidal crystal. Characterization of the colloidal crystal and oxygen diffusion simulations suggested the suitability of the scaffold to support cell survival and growth. This was confirmed by live-cell imaging and fibroblast culture over a period of four days. Moreover, we demonstrate unambiguous durotactic fibroblast migration and mechanosensitive neurite outgrowth of dorsal root ganglion neurons in 3D. This modular approach of assembling 3D scaffolds from mechanically and biochemically well-defined building blocks allows the spatial patterning of stiffness decoupled from porosity and adhesion sites in principle and provides a platform to investigate mechanosensitivity in 3D environments approximating tissues in vitro.

Probing force in living cells with optical tweezers: from single-molecule mechanics to cell mechanotransduction

The invention of optical tweezers more than three decades ago has opened new avenues in the study of the mechanical properties of biological molecules and cells. Quantitative force measurements still represent a challenging task in living cells due to the complexity of the cellular environment. Here, we review different methodologies to quantitatively measure the mechanical properties of living cells, the strength of adhesion/receptor bonds, and the active force produced during intracellular transport, cell adhesion, and migration. We discuss experimental strategies to attain proper calibration of optical tweezers and molecular resolution in living cells. Finally, we show recent studies on the transduction of mechanical stimuli into biomolecular and genetic signals that play a critical role in cell health and disease.

Biomechanical and functional properties of trophoblast cells exposed to Group B Streptococcus in vitro and the beneficial effects of uvaol treatment

BACKGROUND

Group B streptococcus (GBS) is the main bacteria that infects pregnant women and can cause abortion and chorioamnionitis. The impact of GBS effects on human trophoblast cells remains largely elusive, and actions toward anti-inflammatory strategies in pregnancy are needed. A potent anti-inflammatory molecule, uvaol is a triterpene from olive oil and its functions in trophoblasts are unknown. We aimed to analyze biomechanical and functional effects of inactivated GBS in trophoblast cells, with the addition of uvaol to test potential benefits.

METHODS

HTR-8/SVneo cells were treated with uvaol and incubated with inactivated GBS. Cell viability and death were analyzed. Cellular elasticity and topography were accessed by atomic force microscopy. Nitrite production was evaluated by Griess reaction. Nuclear translocation of NFkB p65 was detected by immunofluorescence and Th1/Th2 cytokines by bead-based multiplex assay.

RESULTS

GBS at 10⁸ CFU increased cell death, which was partially prevented by uvaol. Cell stiffness, cytoskeleton organization and morphology were changed by GBS, and uvaol partially restored these alterations. Nuclear translocation of NFkB p65 began 15 min after GBS incubation and uvaol inhibited this process. GBS decreased IL-4 secretion and increased IL-1β, IFN-γ and IL-2, whereas uvaol reverted this.

CONCLUSIONS

The increased inflammation and cell death caused by GBS correlated with biomechanical and cytoskeleton changes found in trophoblast cells, while uvaol was effective its protective role.

GENERAL SIGNIFICANCE

Uvaol is a natural anti-inflammatory product efficient against GBS-induced inflammation and it has potential to be acquired through diet in order to prevent GBS deleterious effects in pregnancy.

T cell migration in microchannels densely packed with T cells

T cells migrate diverse microenvironments of the body to mount antigen-specific immune responses. T cell activation, a key initial process for antigen-specific immune responses, occur in secondary lymphoid organs such as spleens and lymph nodes where high density of T cells migrates rapidly through the reticular networks formed by stromal cells. In vitro model system recapitulating key characteristics of secondary lymphoid organs, confined spaces densely packed with rapidly migrating cells, would be useful to investigate mechanisms of T cell migration. In this study, we devised a method to fabricate microchannels densely packed with T cells. Microchannel arrays with fixed height (4 μm) and length (1.5 mm) and various widths (15~80 μm) were fabricated in between trapezoid-shaped reservoirs that facilitated T cell sedimentation near microchannel entries. Microchannel surface chemistry and filling time were optimized to achieve high packing density (0.89) of T cell filling within microchannels. Particle image velocimetry (PIV) analysis method was employed to extract velocity field of microchannels densely packed with T cells. Using velocity field information, various motility parameters were further evaluated to quantitatively assess the effects of microchannel width and media tonicity on T cell motility within cell dense microenvironments.

Unraveling the Mechanobiology of the Immune System

Cells respond and actively adapt to environmental cues in the form of mechanical stimuli. This extends to immune cells and their critical role in the maintenance of tissue homeostasis. Multiple recent studies have begun illuminating underlying mechanisms of mechanosensation in modulating immune cell phenotypes. Since the extracellular microenvironment is critical to modify cellular physiology that ultimately determines the functionality of the cell, understanding the interactions between immune cells and their microenvironment is necessary. This review focuses on mechanoregulation of immune responses mediated by macrophages, dendritic cells, and T cells, in the context of modern mechanobiology.

Advances in Micropipette Aspiration: Applications in Cell Biomechanics, Models, and Extended Studies

With five decades of sustained application, micropipette aspiration has enabled a wide range of biomechanical studies in the field of cell mechanics. Here, we provide an update on the use of the technique, with a focus on recent developments in the analysis of the experiments, innovative microaspiration-based approaches, and applications in a broad variety of cell types. We first recapitulate experimental variations of the technique. We then discuss analysis models focusing on important limitations of widely used biomechanical models, which underpin the urge to adopt the appropriate ones to avoid misleading conclusions. The possibilities of performing different studies on the same cell are also considered.

A computational model of amoeboid cell motility in the presence of obstacles

Locomotion of amoeboid cells is mediated by finger-like protrusions of the cell body, known as pseudopods, which grow, bifurcate, and retract in a dynamic fashion. Pseudopods are the primary mode of locomotion for many cells within the human body, such as leukocytes, embryonic cells, and metastatic cancer cells. Amoeboid motility is a complex and multiscale process, which involves bio-molecular reactions, cell deformation, and cytoplasmic and extracellular fluid motion. Additionally, cells within the human body are subject to a confined 3D environment known as the extra-cellular matrix (ECM), which resembles a fluid-filled porous medium. In this article, we present a 3D, multiphysics computational approach coupling fluid mechanics, solid mechanics, and a pattern formation model to simulate locomotion of amoeboid cells through a porous matrix composed of a viscous fluid and an array of finite-sized spherical obstacles. The model combines reaction-diffusion of activator/inhibitors, extreme deformation of the cell, pseudopod dynamics, cytoplasmic and extracellular fluid motion, and fully resolved extracellular matrix. A surface finite-element method is used to obtain the cell deformation and activator/inhibitor concentrations, while the fluid motion is solved using a combined finite-volume and spectral method. The immersed-boundary methods are used to couple the cell deformation, obstacles, and fluid. The model is able to recreate squeezing and weaving motion of cells through the matrix. We study the influence of matrix porosity, obstacle size, and cell deformability on the motility behavior. It is found that below certain values of these parameters, cell motion is completely inhibited. Phase diagrams are presented depicting such motility limits. Interesting dynamics seen in the presence of obstacles but absent in unconfined medium, such as freezing or cell arrest, probing, doubling-back, and tug-of-war are predicted. Furthermore, persistent unidirectional motion of cells that is often observed in an unconfined medium is shown to be lost in presence of obstacles, and is attributed to an alteration of the pseudopod dynamics. The same mechanism, however, allows the cell to find a new direction to penetrate further into the matrix without being stuck in one place. The results and analysis presented here show a strong coupling between cell deformability and ECM properties, and provide new fluid mechanical insights on amoeboid motility in confined medium.

Association between biomechanical alterations and migratory ability of semaphorin-3A-treated thymocytes

BACKGROUND

Class 3 semaphorins are soluble proteins involved in cell adhesion and migration. Semaphorin-3A (Sema3A) was initially shown to be involved in neuronal guidance, and it has also been reported to be associated with immune disorders. Both Sema3A and its receptors are expressed by most immune cells, including monocytes, macrophages, and lymphocytes, and these proteins regulate cell function. Here, we studied the correlation between Sema3A-induced changes in biophysical parameters of thymocytes, and the subsequent repercussions on cell function.

METHODS

Thymocytes from mice were treated in vitro with Sema3A for 30min. Scanning electron microscopy was performed to assess cell morphology. Atomic force microscopy was performed to further evaluate cell morphology, membrane roughness, and elasticity. Flow cytometry and/or fluorescence microscopy were performed to assess the F-actin cytoskeleton and ROCK2. Cell adhesion to a bovine serum albumin substrate and transwell migration assays were used to assess cell migration.

RESULTS

Sema3A induced filopodia formation in thymocytes, increased membrane stiffness and roughness, and caused a cortical distribution of the cytoskeleton without changes in F-actin levels. Sema3A-treated thymocytes showed reduced substrate adhesion and migratory ability, without changes in cell viability. In addition, Sema3A was able to down-regulate ROCK2.

CONCLUSIONS

Sema3A promotes cytoskeletal rearrangement, leading to membrane modifications, including increased stiffness and roughness. This effect in turn affects the adhesion and migration of thymocytes, possibly due to a reduction in ROCK2 expression.

GENERAL SIGNIFICANCE

Sema3A treatment impairs thymocyte migration due to biomechanical alterations in cell membranes.

The role of Vimentin in Regulating Cell Invasive Migration in Dense Cultures of Breast Carcinoma Cells

Cell migration and mechanics are tightly regulated by the integrated activities of the various cytoskeletal networks. In cancer cells, cytoskeletal modulations have been implicated in the loss of tissue integrity and acquisition of an invasive phenotype. In epithelial cancers, for example, increased expression of the cytoskeletal filament protein vimentin correlates with metastatic potential. Nonetheless, the exact mechanism whereby vimentin affects cell motility remains poorly understood. In this study, we measured the effects of vimentin expression on the mechano-elastic and migratory properties of the highly invasive breast carcinoma cell line MDA231. We demonstrate here that vimentin stiffens cells and enhances cell migration in dense cultures, but exerts little or no effect on the migration of sparsely plated cells. These results suggest that cell-cell interactions play a key role in regulating cell migration, and coordinating cell movement in dense cultures. Our findings pave the way toward understanding the relationship between cell migration and mechanics in a biologically relevant context.

Toxicity and Immunogenicity in Murine Melanoma following Exposure to Physical Plasma-Derived Oxidants

Metastatic melanoma is an aggressive and deadly disease. Therapeutic advance has been achieved by antitumor chemo- and radiotherapy. These modalities involve the generation of reactive oxygen and nitrogen species, affecting cellular viability, migration, and immunogenicity. Such species are also created by cold physical plasma, an ionized gas capable of redox modulating cells and tissues without thermal damage. Cold plasma has been suggested for anticancer therapy. Here, melanoma cell toxicity, motility, and immunogenicity of murine metastatic melanoma cells were investigated following plasma exposure in vitro. Cells were oxidized by plasma, leading to decreased metabolic activity and cell death. Moreover, plasma decelerated melanoma cell growth, viability, and cell cycling. This was accompanied by increased cellular stiffness and upregulation of zonula occludens 1 protein in the cell membrane. Importantly, expression levels of immunogenic cell surface molecules such as major histocompatibility complex I, calreticulin, and melanocortin receptor 1 were significantly increased in response to plasma. Finally, plasma treatment significantly decreased the release of vascular endothelial growth factor, a molecule with importance in angiogenesis. Altogether, these results suggest beneficial toxicity of cold plasma in murine melanomas with a concomitant immunogenicity of potential interest in oncology.

How Nucleus Mechanics and ECM Microstructure Influence the Invasion of Single Cells and Multicellular Aggregates

In order to move in a three-dimensional extracellular matrix, the nucleus of a cell must squeeze through the narrow spacing among the fibers and, by adhering to them, the cell needs to exert sufficiently strong traction forces. If the nucleus is too stiff, the spacing too narrow, or traction forces too weak, the cell is not able to penetrate the network. In this article, we formulate a mathematical model based on an energetic approach, for cells entering cylindrical channels composed of extracellular matrix fibers. Treating the nucleus as an elastic body covered by an elastic membrane, the energetic balance leads to the definition of a necessary criterion for cells to pass through the regular network of fibers, depending on the traction forces exerted by the cells (or possibly passive stresses), the stretchability of the nuclear membrane, the stiffness of the nucleus, and the ratio of the pore size within the extracellular matrix with respect to the nucleus diameter. The results obtained highlight the importance of the interplay between mechanical properties of the cell and microscopic geometric characteristics of the extracellular matrix and give an estimate for a critical value of the pore size that represents the physical limit of migration and can be used in tumor growth models to predict their invasive potential in thick regions of ECM.

Detecting Swelling States of Red Blood Cells by "Cell-Fluid Coupling Spectroscopy"

Red blood cells are "shaken" with a holographic optical tweezer array. The flow generated around cells due to the periodic optical forcing is measured with an optically trapped "detector" particle located in the cell vicinity. A signal-processing model that describes the cell's physical properties as an analog filter illustrates how cells can be distinguished from each other.

Gradient-Based Optimization for Poroelastic and Viscoelastic MR Elastography

We describe an efficient gradient computation for solving inverse problems arising in magnetic resonance elastography (MRE). The algorithm can be considered as a generalized 'adjoint method' based on a Lagrangian formulation. One requirement for the classic adjoint method is assurance of the self-adjoint property of the stiffness matrix in the elasticity problem. In this paper, we show this property is no longer a necessary condition in our algorithm, but the computational performance can be as efficient as the classic method, which involves only two forward solutions and is independent of the number of parameters to be estimated. The algorithm is developed and implemented in material property reconstructions using poroelastic and viscoelastic modeling. Various gradient- and Hessian-based optimization techniques have been tested on simulation, phantom and in vivo brain data. The numerical results show the feasibility and the efficiency of the proposed scheme for gradient calculation.

Micropatterned Hydrogel Surface with High-Aspect-Ratio Features for Cell Guidance and Tissue Growth

Surface topography has been introduced as a new tool to coordinate cell selection, growth, morphology, and differentiation. The materials explored so far for making such structural surfaces are mostly rigid and impermeable. Hydrogel, on the other hand, was proved a better synthetic media for cell culture because of its biocompatibility, softness, and high permeability. Herein, we fabricated a poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogel substrate with high-aspect-ratio surface microfeatures. Such structural surface could effectively guide the orientation and shape of human mesenchymal stem cells (HMSCs). Notably, on the flat hydrogel surface, cells rounded up, whereas on the microplate patterned hydrogel surface, cells elongated and aligned along the direction parallel to the plates. The microplates were 2 μm thick, 20 μm tall, and 10-50 μm wide. The interplate spacing was 5-15 μm, and the intercolumn spacing was 5 μm. The elongation of cell body was more pronounced on the patterns with narrower interplate spacing and wider plates. The cells behaved like soft solid. The competition between surface energy and elastic energy defined the shape of the cells on the structured surfaces. The soft permeable hydrogel scaffold with surface structures was also demonstrated as being viable for long-term cell culture, and could be used to generate interconnected tissues with finely tuned cell morphology and alignment across a few centimeter sizes.

Concurrent shear stress and chemical stimulation of mechano-sensitive cells by discontinuous dielectrophoresis

Microfluidic platforms enable a variety of physical or chemical stimulation of single or multiple cells to be examined and monitored in real-time. To date, intracellular calcium signalling research is, however, predominantly focused on observing the response of cells to a single mode of stimulation; consequently, the sensitising/desensitising of cell responses under concurrent stimuli is not well studied. In this paper, we provide an extended Discontinuous Dielectrophoresis procedure to investigate the sensitising of chemical stimulation, over an extensive range of shear stress, up to 63 dyn/cm(2), which encompasses shear stresses experienced in the arterial and venus systems (10 to 60 dyn/cm(2)). Furthermore, the TRPV4-selective agonist GSK1016790A, a form of chemical stimulation, did not influence the ability of the cells' to remain immobilised under high levels of shear stress; thus, enabling us to investigate shear stress stimulation on agonism. Our experiments revealed that shear stress sensitises GSK1016790A-evoked intracellular calcium signalling of cells in a shear-stimulus dependent manner, as observed through a reduction in the cellular response time and an increase in the pharmacological efficacy. Consequently, suggesting that the role of TRPV4 may be underestimated in endothelial cells-which experience high levels of shear stress. This study highlights the importance of conducting studies at high levels of shear stress. Additionally, our approach will be valuable for examining the effect of high levels of shear on different cell types under different conditions, as presented here for agonist activation.

Regulation of breast cancer cell behaviours by the physical microenvironment constructed via projection microstereolithography

A considerable number of studies have examined how intrinsic factors regulate breast cancer cell behaviours; however, physical microenvironmental cues may also modulate cellular morphology, proliferation, and migration and mechanical properties.

An optofluidic constriction chip for monitoring metastatic potential and drug response of cancer cells

Cellular mechanical properties constitute good markers to characterize tumor cells, to study cell population heterogeneity and to highlight the effect of drug treatments. In this work, we describe the fabrication and validation of an integrated optofluidic chip capable of analyzing cellular deformability on the basis of the pressure gradient needed to push a cell through a narrow constriction. We demonstrate the ability of the chip to discriminate between tumorigenic and metastatic breast cancer cells (MCF7 and MDA-MB231) and between human melanoma cells with different metastatic potential (A375P and A375MC2). Moreover, we show that this chip allows highlighting the effect of drugs interfering with microtubule organization (paclitaxel, combretastatin A-4 and nocodazole) on cancer cells, which leads to changes in the pressure-gradient required to push cells through the constriction. Our single-cell microfluidic device for mechanical evaluation is compact and easy to use, allowing for an extensive use in different laboratory environments.

Interstitial flows promote amoeboid over mesenchymal motility of breast cancer cells revealed by a three dimensional microfluidic model

Malignant tumors are often associated with an elevated fluid pressure due to the abnormal growth of vascular vessels, and thus an increased interstitial flow out of the tumors. Recent in vitro works revealed that interstitial flows critically regulated tumor cell migration within a three dimensional biomatrix, and breast cancer cell migration behavior depended sensitively on the cell seeding density, chemokine availability and flow rates. In this paper, we focus on the role of interstitial flows in modulating the heterogeneity of cancer cell motility phenotype within a three dimensional biomatrix. Using a newly developed microfluidic model, we show that breast cancer cells (MDA-MB-231) embedded in a 3D type I collagen matrix exhibit both amoeboid and mesenchymal motility, and interstitial flows promote the cell population towards the amoeboid motility phenotype. Furthermore, the addition of exogenous adhesion molecules (fibronectin) within the extracellular matrix (type I collagen) partially rescues the mesenchymal phenotype in the presence of the flow. Quantitative analysis of cell tracks and cell shapes shows distinct differential migration characteristics of amoeboid and mesenchymal cells. Notably, the fastest moving cells belong to the subpopulation of amoeboid cells. Together, these findings highlight the important role of biophysical forces in modulating tumor cell migration heterogeneity and plasticity, as well as the suitability of microfluidic models in interrogating tumor cell dynamics at single-cell and subpopulation level.

Review of cellular mechanotransduction on micropost substrates

As physical entities, living cells can sense and respond to various stimulations within and outside the body through cellular mechanotransduction. Any deviation in cellular mechanotransduction will not only undermine the orchestrated regulation of mechanical responses, but also lead to the breakdown of their physiological function. Therefore, a quantitative study of cellular mechanotransduction needs to be conducted both in experiments and in computational simulations to investigate the underlying mechanisms of cellular mechanotransduction. In this review, we present an overview of the current knowledge and significant progress in cellular mechanotransduction via micropost substrates. In the aspect of experimental studies, we summarize significant experimental progress and place an emphasis on the coupled relationship among cellular spreading, focal adhesion and contractility as well as the influence of substrate properties on force-involved cellular behaviors. In the other aspect of computational investigations, we outline a coupled framework including the biochemically motivated stress fiber model and thermodynamically motivated adhesion model and present their predicted biomechanical responses and then compare predicted simulation results with experimental observations to further explore the mechanisms of cellular mechanotransduction. At last, we discuss the future perspectives both in experimental technologies and in computational models, as well as facing challenges in the area of cellular mechanotransduction.

A monolithic glass chip for active single-cell sorting based on mechanical phenotyping

The mechanical properties of biological cells have long been considered as inherent markers of biological function and disease. However, the screening and active sorting of heterogeneous populations based on serial single-cell mechanical measurements has not been demonstrated. Here we present a novel monolithic glass chip for combined fluorescence detection and mechanical phenotyping using an optical stretcher. A new design and manufacturing process, involving the bonding of two asymmetrically etched glass plates, combines exact optical fiber alignment, low laser damage threshold and high imaging quality with the possibility of several microfluidic inlet and outlet channels. We show the utility of such a custom-built optical stretcher glass chip by measuring and sorting single cells in a heterogeneous population based on their different mechanical properties and verify sorting accuracy by simultaneous fluorescence detection. This offers new possibilities of exact characterization and sorting of small populations based on rheological properties for biological and biomedical applications.

Modeling tumor microenvironments in vitro

Tumor progression depends critically upon the interactions between the tumor cells and their microenvironment. The tumor microenvironment is heterogeneous and dynamic; it consists of extracellular matrix, stromal cells, immune cells, progenitor cells, and blood and lymphatic vessels. The emerging fields of tissue engineering and microtechnologies have opened up new possibilities for engineering physiologically relevant and spatially well-defined microenvironments. These in vitro models allow specific manipulation of biophysical and biochemical parameters, such as chemical gradients, biomatrix stiffness, metabolic stress, and fluid flows; thus providing a means to study their roles in certain aspects of tumor progression such as cell proliferation, invasion, and crosstalk with other cell types. Challenges and perspectives for deconvolving the complexity of tumor microenvironments will be discussed. Emphasis will be given to in vitro models of tumor cell migration and invasion.

Actin polymerization as a key innate immune effector mechanism to control Salmonella infection

Salmonellosis is one of the leading causes of food poisoning worldwide. Controlling bacterial burden is essential to surviving infection. Nucleotide-binding oligomerization domain-like receptors (NLRs), such as NLRC4, induce inflammasome effector functions and play a crucial role in controlling Salmonella infection. Inflammasome-dependent production of IL-1β recruits additional immune cells to the site of infection, whereas inflammasome-mediated pyroptosis of macrophages releases bacteria for uptake by neutrophils. Neither of these functions is known to directly kill intracellular salmonellae within macrophages. The mechanism, therefore, governing how inflammasomes mediate intracellular bacterial-killing and clearance in host macrophages remains unknown. Here, we show that actin polymerization is required for NLRC4-dependent regulation of intracellular bacterial burden, inflammasome assembly, pyroptosis, and IL-1β production. NLRC4-induced changes in actin polymerization are physically manifested as increased cellular stiffness, and leads to reduced bacterial uptake, production of antimicrobial molecules, and arrested cellular migration. These processes act in concert to limit bacterial replication in the cell and dissemination in tissues. We show, therefore, a functional link between innate immunity and actin turnover in macrophages that underpins a key host defense mechanism for the control of salmonellosis.

Local viscoelastic properties of live cells investigated using dynamic and quasi-static atomic force microscopy methods

The measurement of viscoelasticity of cells in physiological environments with high spatio-temporal resolution is a key goal in cell mechanobiology. Traditionally only the elastic properties have been measured from quasi-static force-distance curves using the atomic force microscope (AFM). Recently, dynamic AFM-based methods have been proposed to map the local in vitro viscoelastic properties of living cells with nanoscale resolution. However, the differences in viscoelastic properties estimated from such dynamic and traditional quasi-static techniques are poorly understood. In this work we quantitatively reconstruct the local force and dissipation gradients (viscoelasticity) on live fibroblast cells in buffer solutions using Lorentz force excited cantilevers and present a careful comparison between mechanical properties (local stiffness and damping) extracted using dynamic and quasi-static force spectroscopy methods. The results highlight the dependence of measured viscoelastic properties on both the frequency at which the chosen technique operates as well as the interactions with subcellular components beyond certain indentation depth, both of which are responsible for differences between the viscoelasticity property maps acquired using the dynamic AFM method against the quasi-static measurements.

A novel 2.5D culture platform to investigate the role of stiffness gradients on adhesion-independent cell migration

Current studies investigating the role of biophysical cues on cell migration focus on the use of culture platforms with static material parameters. However, migrating cells invivo often encounter spatial variations in extracellular matrix stiffness. To better understand the effects of stiffness gradients on cell migration, we developed a 2.5D cell culture platform where cells are sandwiched between stiff tissue culture plastic and soft alginate hydrogel. Under these conditions, we observed migration of cells from the underlying stiff substrate into the alginate matrix. Observation of migration into alginate in the presence of integrin inhibition as well as qualitative microscopic analyses suggested an adhesion-independent cell migration mode. Observed migration was dependent on alginate matrix stiffness and the RhoA-ROCK-myosin-II pathway; inhibitors specifically targeting ROCK and myosin-II arrested cell migration. Collectively, these results demonstrate the utility of the 2.5D culture platform to advance our understanding of the effects of stiffness gradients and mechanotransductive signaling on adhesion-independent cell migration.

Impact of heating on passive and active biomechanics of suspended cells

A cell is a complex material whose mechanical properties are essential for its normal functions. Heating can have a dramatic effect on these mechanical properties, similar to its impact on the dynamics of artificial polymer networks. We investigated such mechanical changes by the use of a microfluidic optical stretcher, which allowed us to probe cell mechanics when the cells were subjected to different heating conditions at different time scales. We find that HL60/S4 myeloid precursor cells become mechanically more compliant and fluid-like when subjected to either a sudden laser-induced temperature increase or prolonged exposure to higher ambient temperature. Above a critical temperature of 52 ± 1°C, we observed active cell contraction, which was strongly correlated with calcium influx through temperature-sensitive transient receptor potential vanilloid 2 (TRPV2) ion channels, followed by a subsequent expansion in cell volume. The change from passive to active cellular response can be effectively described by a mechanical model incorporating both active stress and viscoelastic components. Our work highlights the role of TRPV2 in regulating the thermomechanical response of cells. It also offers insights into how cortical tension and osmotic pressure govern cell mechanics and regulate cell-shape changes in response to heat and mechanical stress.

Micro-environmentally restricted cell growth dynamics - modeling considerations

Various modeling approaches have been applied to describe the rearrangement of immobilized cell clusters within the extracellular matrix. The cell rearrangement has been related with the micro-environmental restrictions to cell growth. Herein, an attempt is made to discuss and connect various modeling approaches on various time scales which have been proposed in the literature in order to shed further light to this complex phenomenon which induces micro-environmental restrictions to cell growth. The rearrangement is driven by internal stress generated within the cluster. The internal stress represents a consequence of the matrix rheological response to cell expansion. The rearrangement includes the interplay between the processes of: (1) single and collective cell migrations, (2) cell deformation and orientation, (3) decrease of cell-to-cell separation distances and (4) cell growth. It has been considered on two time scales: a short time scale (i.e. the rearrangement time) and a long time scale (i.e. the growing time). The results indicate that short and long times cell rearrangement induces energy dissipation. The dissipation provokes biological responses of cells which cause the resistance effects to cell growth. Deeper insight in the anomalous nature of the energy dissipation would be useful for understanding the biological mechanisms which causes the resistance effects to cell growth.

Loss of myoferlin redirects breast cancer cell motility towards collective migration

Cell migration plays a central role in the invasion and metastasis of tumors. As cells leave the primary tumor, they undergo an epithelial to mesenchymal transition (EMT) and migrate as single cells. Epithelial tumor cells may also migrate in a highly directional manner as a collective group in some settings. We previously discovered that myoferlin (MYOF) is overexpressed in breast cancer cells and depletion of MYOF results in a mesenchymal to epithelial transition (MET) and reduced invasion through extracellular matrix (ECM). However, the biomechanical mechanisms governing cell motility during MYOF depletion are poorly understood. We first demonstrated that lentivirus-driven shRNA-induced MYOF loss in MDA-MB-231 breast cancer cells (MDA-231(MYOF-KD)) leads to an epithelial morphology compared to the mesenchymal morphology observed in control (MDA-231(LTVC)) and wild-type cells. Knockdown of MYOF led to significant reductions in cell migration velocity and MDA-231(MYOF-KD) cells migrated directionally and collectively, while MDA-231(LTVC) cells exhibited single cell migration. Decreased migration velocity and collective migration were accompanied by significant changes in cell mechanics. MDA-231(MYOF-KD) cells exhibited a 2-fold decrease in cell stiffness, a 2-fold increase in cell-substrate adhesion and a 1.5-fold decrease in traction force generation. In vivo studies demonstrated that when immunocompromised mice were implanted with MDA-231(MYOF-KD) cells, tumors were smaller and demonstrated lower tumor burden. Moreover, MDA-231(MYOF-KD) tumors were highly circularized and did not invade locally into the adventia in contrast to MDA-231(LTVC)-injected animals. Thus MYOF loss is associated with a change in tumor formation in xenografts and leads to smaller, less invasive tumors. These data indicate that MYOF, a previously unrecognized protein in cancer, is involved in MDA-MB-231 cell migration and contributes to biomechanical alterations. Our results indicate that changes in biomechanical properties following loss of this protein may be an effective way to alter the invasive capacity of cancer cells.

Wharton's Jelly human mesenchymal stem cell contact guidance by noisy nanotopographies

The development of biomaterials ensuring proper cell adhesion, polarization, migration and differentiation represents a true enabler for successful tissue-engineering applications. Surface nanostructuring was suggested as a promising method for improving cell-substrate interaction. Here, we study Wharton's Jelly human Mesenchymal Stem Cells (WJ-hMSC) interacting with nanogratings (NGs) having a controlled amount of nanotopographical noise (nTN). Our data demonstrate that unperturbed NGs induce cell polarization, alignment and migration along NG lines. The introduction of nTN dramatically modifies this behavior and leads to a marked loss of cell polarization and directional migration, even at low noise levels. High-resolution focal adhesions (FAs) imaging showed that this behavior is caused by the release of the geometrical vinculum imposed by the NGs to FA shaping and maturation. We argue that highly anisotropic nanopatterned scaffolds can be successfully exploited to drive stem cell migration in regenerative medicine protocols and discuss the impact of scaffold alterations or wear.

The influence of physical and physiological cues on atomic force microscopy-based cell stiffness assessment

Atomic force microscopy provides a novel technique for differentiating the mechanical properties of various cell types. Cell elasticity is abundantly used to represent the structural strength of cells in different conditions. In this study, we are interested in whether physical or physiological cues affect cell elasticity in Atomic force microscopy (AFM)-based assessments. The physical cues include the geometry of the AFM tips, the indenting force and the operating temperature of the AFM. All of these cues show a significant influence on the cell elasticity assessment. Sharp AFM tips create a two-fold increase in the value of the effective Young's modulus (E(eff)) relative to that of the blunt tips. Higher indenting force at the same loading rate generates higher estimated cell elasticity. Increasing the operation temperature of the AFM leads to decreases in the cell stiffness because the structure of actin filaments becomes disorganized. The physiological cues include the presence of fetal bovine serum or extracellular matrix-coated surfaces, the culture passage number, and the culture density. Both fetal bovine serum and the extracellular matrix are critical for cells to maintain the integrity of actin filaments and consequently exhibit higher elasticity. Unlike primary cells, mouse kidney progenitor cells can be passaged and maintain their morphology and elasticity for a very long period without a senescence phenotype. Finally, cell elasticity increases with increasing culture density only in MDCK epithelial cells. In summary, for researchers who use AFM to assess cell elasticity, our results provide basic and significant information about the suitable selection of physical and physiological cues.

Osteopontin promotes mesenchymal stem cell migration and lessens cell stiffness via integrin β1, FAK, and ERK pathways

The use of mesenchymal stem cells (MSCs) for therapeutic applications has attracted great attention because MSCs home to and engraft to injured tissues after in vivo administration. The expression of osteopontin (OPN) is elevated in response to injury and inflammation, and its role on rat bone marrow-derived mesenchymal stem cells (rMSCs)-directed migration has been elucidated. However, the signaling pathways through the activation of which OPN promotes rMSCs migration and the involvement of cell mechanics during OPN-mediating rMSCs migration have not been well studied. In this study, we found that OPN activated focal adhesion kinase (FAK) and extracellular signal-regulated kinase (ERK) signaling pathways by the ligation of integrin β1 in rMSCs. Inhibitors of FAK and ERK pathways inhibited OPN-induced rMSCs migration, indicating the possible involvement of FAK and ERK activation in OPN-induced migration in rMSCs. In addition, atomic force microscopy analysis showed that OPN reduced cell stiffness in rMSCs via integrin β1, FAK, and ERK pathways, suggesting that the promotion of rMSCs migration might partially be contributing to the decrease in cell stiffness stimulated by OPN. To further examine the role of OPN on cell motility and stiffness, actin cytoskeleton of rMSCs was observed. The reduced well-defined F-actin filaments and the promoted formation of pseudopodia in rMSCs induced by OPN explained the reduction in cell stiffness and the increase in cell migration. The current study data have shown for the first time that OPN binding to integrin β1 promotes rMSCs migration through the activation of FAK and ERK pathways, which may be attributed to the change in cell stiffness caused by the reduction in the amount of organized actin cytoskeleton.

Influence of nucleus deformability on cell entry into cylindrical structures

The mechanical properties of cell nuclei have been demonstrated to play a fundamental role in cell movement across extracellular networks and micro-channels. In this work, we focus on a mathematical description of a cell entering a cylindrical channel composed of extracellular matrix. An energetic approach is derived in order to obtain a necessary condition for which cells enter cylindrical structures. The nucleus of the cell is treated either (i) as an elastic membrane surrounding a liquid droplet or (ii) as an incompressible elastic material with Neo-Hookean constitutive equation. The results obtained highlight the importance of the interplay between mechanical deformability of the nucleus and the capability of the cell to establish adhesive bonds and generate active forces in the cytoskeleton due to myosin action.

Drugs for solid cancer: the productivity crisis prompts a rethink

Despite remarkable progress in cancer-drug discovery, the delivery of novel, safe, and sustainably effective products to the clinic has stalled. Using Src as a model, we examine key steps in drug development. The preclinical evidence on the relationship between Src and solid cancer is in sharp contrast with the modest anticancer effect noted in conventional clinical trials. Here, we consider Src inhibitors as an example of a promising drug class directed to invasion and metastasis and identify roadblocks in translation. We question the assumption that a drug-induced tumor shrinkage in preclinical and clinical studies predicts a successful outcome. Our analysis indicates that the key areas requiring attention are related, and include preclinical models (in vitro and mouse models), meaningful clinical trial end points, and an appreciation of the role of metastasis in morbidity and mortality. Current regulations do not reflect the natural history of the disease, and may be unrelated to the key complications: local invasion, metastasis, and the development of resistance. Alignment of preclinical and clinical studies and regulations based on mechanistic trial end points and platforms may help in overcoming these roadblocks. Viewed kaleidoscopically, most elements necessary and sufficient for a novel translational paradigm are in place.

Mechanics in neuronal development and repair

Biological cells are well known to respond to a multitude of chemical signals. In the nervous system, chemical signaling has been shown to be crucially involved in development, normal functioning, and disorders of neurons and glial cells. However, there are an increasing number of studies showing that these cells also respond to mechanical cues. Here, we summarize current knowledge about the mechanical properties of nervous tissue and its building blocks, review recent progress in methodology and understanding of cellular mechanosensitivity in the nervous system, and provide an outlook on the implications of neuromechanics for future developments in biomedical engineering to aid overcoming some of the most devastating and currently incurable CNS pathologies such as spinal cord injuries and multiple sclerosis.

Actin binding proteins: their ups and downs in metastatic life

In order to metastasize away from the primary tumor site and migrate into adjacent tissues, cancer cells will stimulate cellular motility through the regulation of their cytoskeletal structures. Through the coordinated polymerization of actin filaments, these cells will control the geometry of distinct structures, namely lamella, lamellipodia and filopodia, as well as the more recently characterized invadopodia. Because actin binding proteins play fundamental functions in regulating the dynamics of actin polymerization, they have been at the forefront of cancer research. This review focuses on a subset of actin binding proteins involved in the regulation of these cellular structures and protrusions, and presents some general principles summarizing how these proteins may remodel the structure of actin. The main body of this review aims to provide new insights into how the expression of these actin binding proteins is regulated during carcinogenesis and highlights new mechanisms that may be initiated by the metastatic cells to induce aberrant expression of such proteins.

Modeling the influence of nucleus elasticity on cell invasion in fiber networks and microchannels

Cell migration in highly constrained extracellular matrices is exploited in scaffold-based tissue engineering and is fundamental in a wide variety of physiological and pathological phenomena, among others in cancer invasion and development. Research into the critical processes involved in cell migration has mainly focused on cell adhesion and proteolytic degradation of the external environment. However, rising evidence has recently shown that a number of cell-derived biophysical and mechanical parameters, among others nucleus stiffness and cell deformability, plays a major role in cell motility, especially in the ameboid-like migration mode in 3D confined tissue structures. We here present an extended cellular Potts model (CPM) first used to simulate a micro-fabricated migration chip, which tests the active invasive behavior of cancer cells into narrow channels. As distinct features of our approach, cells are modeled as compartmentalized discrete objects, differentiated in the nucleus and in the cytosolic region, while the migration chamber is composed of channels of different widths. We find that cell motile phenotype and velocity in open spaces (i.e., 2D flat surfaces or large channels) are not significantly influenced by cell elastic properties. On the contrary, the migratory behavior of cells within subcellular and subnuclear structures strongly relies on the deformability of the cytosol and of the nuclear cluster, respectively. Further, we characterize two migration dynamics: a stepwise way, characterized by fluctuations in cell length, within channels smaller than nucleus dimensions and a smooth sliding (i.e., maintaining constant cell length) behavior within channels larger than the nuclear cluster. These resulting observations are then extended looking at cell migration in an artificial fiber network, which mimics cell invasion in a 3D extracellular matrix. In particular, in this case, we analyze the effect of variations in elasticity of the nucleus on cell movement. In order to summarize, with our simulated migration assays, we demonstrate that the dimensionality of the environment strongly affects the migration phenotype and we suggest that the cytoskeletal and nuclear elastic characteristics correlate with the tumor cell's invasive potential.

Mechanical environment modulates biological properties of oligodendrocyte progenitor cells

Myelination and its regenerative counterpart remyelination represent one of the most complex cell-cell interactions in the central nervous system (CNS). The biochemical regulation of axon myelination via the proliferation, migration, and differentiation of oligodendrocyte progenitor cells (OPCs) has been characterized extensively. However, most biochemical analysis has been conducted in vitro on OPCs adhered to substrata of stiffness that is orders of magnitude greater than that of the in vivo CNS environment. Little is known of how variation in mechanical properties over the physiological range affects OPC biology. Here, we show that OPCs are mechanosensitive. Cell survival, proliferation, migration, and differentiation capacity in vitro depend on the mechanical stiffness of polymer hydrogel substrata. Most of these properties are optimal at the intermediate values of CNS tissue stiffness. Moreover, many of these properties measured for cells on gels of optimal stiffness differed significantly from those measured on glass or polystyrene. The dependence of OPC differentiation on the mechanical properties of the extracellular environment provides motivation to revisit results obtained on nonphysiological, rigid surfaces. We also find that OPCs stiffen upon differentiation, but that they do not change their compliance in response to substratum stiffness, which is similar to embryonic stem cells, but different from adult stem cells. These results form the basis for further investigations into the mechanobiology of cell function in the CNS and may specifically shed new light on the failure of remyelination in chronic demyelinating diseases such as multiple sclerosis.