Preferential graphitic-nitrogen formation in pyridine-extended graphene nanoribbons

Graphene nanoribbons (GNRs), nanometer-wide strips of graphene, have garnered significant attention due to their tunable electronic and magnetic properties arising from quantum confinement. A promising approach to manipulate their electronic characteristics involves substituting carbon with heteroatoms, such as nitrogen, with different effects predicted depending on their position. In this study, we present the extension of the edges of 7-atom-wide armchair graphene nanoribbons (7-AGNRs) with pyridine rings, achieved on a Au(111) surface via on-surface synthesis. High-resolution structural characterization confirms the targeted structure, showcasing the predominant formation of carbon-nitrogen (C-N) bonds (over 90% of the units) during growth. This favored bond formation pathway is elucidated and confirmed through density functional theory (DFT) simulations. Furthermore, an analysis of the electronic properties reveals metallic behavior due to charge transfer to the Au(111) substrate accompanied by the presence of nitrogen-localized states. Our results underscore the successful formation of C-N bonds on the metal surface, providing insights for designing new GNRs that incorporate substitutional nitrogen atoms to precisely control their electronic properties.

Influence of chitosan and hydroxyethyl cellulose modifications towards the design of cross-linked double networks hydrogel for diabetic wound healing

The wound dressings' lack of antioxidant and antibacterial properties, and delayed wound healing limit their use in wound treatment and management. Recent advances in dressing materials are aimed at improving the limitations discussed above. Therefore, the aim of this study includes the preparation and characterization of oxidized hydroxyethyl cellulose (OHEC) and ferulic acid-grafted chitosan (CS-FA) hydrogel loaded with green synthesized selenium nanoparticles (Se NPs) (OHEC-CS-FA-Se NPs named as nanohydrogel) for diabetic wound healing. The structure and properties of the hydrogel was characterized by FTIR, FE-SEM, HR-TEM, EDAX, UV-Vis spectrophotometry, XRD, DLS, zeta potential and rheological studies. The findings of these experiments demonstrate that nanohydrogel possesses a variety of outstanding qualities, including an optimal gel time, good swelling characteristics, a fair water retention rate, a good degradation rate, and strong mechanical stability. Nanohydrogel has been shown to have a synergistic impact by significantly increasing antioxidant activity by scavenging ABTS and DPPH radicals. The nanohydrogel's strong biocompatibility was confirmed by cytocompatibility testing using L929 mouse fibroblast cells. In addition, the wound healing potential of nanohydrogel was tested on L929 cells by an in vitro scratch assay and the nanohydrogel showed a wound closure rate of 100 % after 12 h. In addition to this study, nanohydrogel has demonstrated significant antimicrobial properties against human and wound infection causing pathogens such as Bacillus subtilis, methicillin-resistant Staphylococcus aureus (MRSA), Escherichia coli, and Pseudomonas aeruginosa. In the animal model, almost complete diabetic wound healing was achieved on day 14 after application of the nanohydrogel. The results obtained indicate that the multifunctional bioactive nature of OHEC-CS-FA-Se NPs showed exceptional antioxidant and antibacterial potential for the treatment of infected and chronic wounds.

Stepwise on-surface synthesis of nitrogen-doped porous carbon nanoribbons

Precise synthesis of carbon-based nanostructures with well-defined structural and chemical properties is of significance towards organic nanomaterials, but remains challenging. Herein, we report on a synthesis of nitrogen-doped porous carbon nanoribbons through a stepwise on-surface polymerization. Scanning tunneling microscopy revealed that the selectivity in molecular conformation, intermolecular debrominative aryl-aryl coupling and inter-chain dehydrogenative cross-coupling determined the well-defined topology and chemistry of the final products. Density functional theory calculations predict that the ribbons are semiconductors, and the band gap can be tuned by the width of the ribbons.

Precision Graphene Nanoribbon Heterojunctions by Chain-Growth Polymerization

Graphene nanoribbons (GNRs) are considered promising candidates for next-generation nanoelectronics. In particular, GNR heterojunctions have received considerable attention due to their exotic topological electronic phases at the heterointerface. However, strategies for their precision synthesis remain at a nascent stage. Here, we report a novel chain-growth polymerization strategy that allows for constructing GNR heterojunction with N=9 armchair and chevron GNRs segments (9-AGNR/cGNR). The synthesis involves a controlled Suzuki-Miyaura catalyst-transfer polymerization (SCTP) between 2-(6'-bromo-4,4''-ditetradecyl-[1,1':2',1''-terphenyl]-3'-yl) boronic ester (M1) and 2-(7-bromo-9,12-diphenyl-10,11-bis(4-tetradecylphenyl)-triphenylene-2-yl) boronic ester (M2), followed by the Scholl reaction of the obtained block copolymer (poly-M1/M2) with controlled Mn (18 kDa) and narrow Đ (1.45). NMR and SEC analysis of poly-M1/M2 confirm the successful block copolymerization. The solution-mediated cyclodehydrogenation of poly-M1/M2 toward 9-AGNR/cGNR is unambiguously validated by FT-IR, Raman, and UV/Vis spectroscopies. Moreover, we also demonstrate the on-surface formation of pristine 9-AGNR/cGNR from the unsubstituted copolymer precursor, which is unambiguously characterized by scanning tunneling microscopy (STM).

Sub-5 nm Contacts and Induced p-n Junction Formation in Individual Atomically Precise Graphene Nanoribbons

This paper demonstrates the fabrication of nanometer-scale metal contacts on individual graphene nanoribbons (GNRs) and the use of these contacts to control the electronic character of the GNRs. We demonstrate the use of a low-voltage direct-write STM-based process to pattern sub-5 nm metallic hafnium diboride (HfB2) contacts directly on top of single GNRs in an ultrahigh-vacuum scanning tunneling microscope (UHV-STM), with all the fabrication performed on a technologically relevant semiconductor silicon substrate. Scanning tunneling spectroscopy (STS) data not only verify the expected metallic and semiconducting character of the contacts and GNR, respectively, but also show induced band bending and p-n junction formation in the GNR due to the metal-GNR work function difference. Contact engineering with different work function metals obviates the need to create GNRs with different characteristics by complex chemical doping. This is a demonstration of the successful fabrication of precise metal contacts and local p-n junction formation on single GNRs.

Fermi-Level Engineering of Nitrogen Core-Doped Armchair Graphene Nanoribbons

Substitutional heteroatom doping of bottom-up engineered 1D graphene nanoribbons (GNRs) is a versatile tool for realizing low-dimensional functional materials for nanoelectronics and sensing. Previous efforts have largely relied on replacing C-H groups lining the edges of GNRs with trigonal planar N atoms. This type of atomically precise doping, however, only results in a modest realignment of the valence band (VB) and conduction band (CB) energies. Here, we report the design, bottom-up synthesis, and spectroscopic characterization of nitrogen core-doped 5-atom-wide armchair GNRs (N2-5-AGNRs) that yield much greater energy-level shifting of the GNR electronic structure. Here, the substitution of C atoms with N atoms along the backbone of the GNR introduces a single surplus π-electron per dopant that populates the electronic states associated with previously unoccupied bands. First-principles DFT-LDA calculations confirm that a sizable shift in Fermi energy (∼1.0 eV) is accompanied by a broad reconfiguration of the band structure, including the opening of a new band gap and the transition from a direct to an indirect semiconducting band gap. Scanning tunneling spectroscopy (STS) lift-off charge transport experiments corroborate the theoretical results and reveal the relationship among substitutional heteroatom doping, Fermi-level shifting, electronic band structure, and topological engineering for this new N-doped GNR.

Continuous Production of Functionalized Graphene Inks by Soft Solution Processing

The continuous production of high-quality, few-layer graphene nanosheets (GNSs) functionalized with nitrogen-containing groups was achieved via a two-stage reaction method. The initial stage produces few-layer GNSs by utilizing our recently developed glycine-bisulfate ionic complex-assisted electrochemical exfoliation of graphite. The second stage, developed here, uses a radical initiator and nitrogen precursor (azobisisobutyronitrile) under microwave conditions in an aqueous solution for the efficient nitrogen functionalization of the initially formed GNSs. These nitrile radical reactions have great advantages in green chemistry and soft processing. Raman spectra confirm the insertion of nitrogen functional groups into nitrogen-functionalized graphene (N-FG), whose disorder is higher than that of GNSs. X-ray photoelectron spectra confirm the insertion of edge/surface nitrogen functional groups. The insertion of nitrogen functional groups is further confirmed by the enhanced dispersibility of N-FG in dimethyl formamide, ethylene glycol, acetonitrile, and water. Indeed, after the synthesis of N-FG in solution, it is possible to disperse N-FG in these liquid dispersants just by a simple washing-centrifugation separation-dispersion sequence. Therefore, without any drying, milling, and redispersion into liquid again, we can produce N-FG ink with only solution processing. Thus, the present work demonstrates the 'continuous solution processing' of N-FG inks without complicated post-processing conditions. Furthermore, the formation mechanism of N-FG is presented.

N-doped graphene for electrocatalytic O2 and CO2 reduction

The electrocatalytic CO₂ reduction reaction (CO₂RR) and oxygen reduction reaction (ORR) are important approaches to realize energy conversion and sustainable development. However, sluggish reaction kinetics severely hinders the practical application of devices related to these reactions. N-doped graphene (NG) with unique properties exhibits great potential in catalyzing the CO₂RR and ORR, which is attributed to the electron redistribution. In this review, we start from the fundamental properties of NG, especially emphasizing the changes caused by N doping. Then the synthetic methods are summarized by classifying them into top-down strategies and bottom-up strategies. Subsequently, the applications of NG in the ORR and CO₂RR are discussed and the effects of electronic structure on the electrocatalytic activity are highlighted. Finally, we give our own perspective on the future research direction of NG in the applications of the ORR and CO₂RR.

Neto A. cis-[6-(Pyridin-2-yl)-1,3,5-triazine-2,4-diamine](dichloride) Palladium(II)-Based Electrolyte Membrane Reactors for Partial Oxidation Methane to Methanol

Methane is an abundant resource and the main constituent of natural gas. It can be converted into higher value-added products and as a subproduct of electricity co-generation. The application of polymer electrolyte reactors for the partial oxidation of methane to methanol to co-generate power and chemical products is a topic of great interest for gas and petroleum industries, especially with the use of materials with a lower amount of metals, such as palladium complex. In this study, we investigate the ideal relationship between cis-[6-(pyridin-2-yl)-1,3,5-triazine-2,4-diamine(dichloride)palladium(II)] (Pd-complex) nanostructure and carbon to obtain a stable, conductive, and functional reagent diffusion electrode. The physical and structural properties of the material were analyzed by Fourier transform infrared (FT-IR) and Raman spectroscopies, transmission electron microscopy (TEM), and X-ray powder diffraction (XRD) techniques. The electrocatalytic activity studies revealed that the most active proportion was 20% of Pd-complex supported on carbon (m/m), which was measured with lower values of open-circuit and power density but with higher efficiency in methanol production with reaction rates of r = 4.2 mol L^-1·h^-1 at 0.05 V.

Nanographenes and Graphene Nanoribbons as Multitalents of Present and Future Materials Science

As cut-outs from a graphene sheet, nanographenes (NGs) and graphene nanoribbons (GNRs) are ideal cases with which to connect the world of molecules with that of bulk carbon materials. While various top-down approaches have been developed to produce such nanostructures in high yields, in the present perspective, precision structural control is emphasized for the length, width, and edge structures of NGs and GNRs achieved by modern solution and on-surface syntheses. Their structural possibilities have been further extended from "flatland" to the three-dimensional world, where chirality and handedness are the jewels in the crown. In addition to properties exhibited at the molecular level, self-assembly and thin-film structures cannot be neglected, which emphasizes the importance of processing techniques. With the rich toolkit of chemistry in hand, NGs and GNRs can be endowed with versatile properties and functions ranging from stimulated emission to spintronics and from bioimaging to energy storage, thus demonstrating their multitalents in present and future materials science.

Two multifunctional benzoquinone derivatives as small molecule organic semiconductors for bulk heterojunction and perovskite solar cells

Two novel quinone derivatives (NN3 and NN4) were synthesized in this work and they were characterized to be used as small organic semiconductor molecules in different types of photovoltaic applications. To make accessible compounds, three simple steps were followed to prepare NN3 and NN4 compounds. Furthermore, energy levels of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) were determined for the computationally optimized models of the investigated compounds. The obtained optical and electrochemical results of this work indicated that NN3 and NN4 compounds were good candidates for application in the fields of bulk heterojunction (BHJ) and perovskite solar cells. Indeed, investigating new energy resources has been seen an important topic of research for producing clean energies and portable storage systems.

Pentagons and Heptagons on Edges of Graphene Nanoflakes Analyzed by X-ray Photoelectron and Raman Spectroscopy

Identifying pentagons and heptagons in graphene nanoflake (GNF) structures at the atomic scale is important to completely understand the chemical and physical properties of these materials. Herein, we used X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy to analyze the spectral features of GNFs according to the position of pentagons and heptagons introduced onto their zigzag and armchair edges. The XPS peak maxima were shifted to higher binding energies by introducing the pentagons or heptagons on armchair rather than zigzag edges, and the structures could be distinguished depending on the positions of the introduced pentagons or heptagons. Raman spectroscopic analyses also revealed that the position of edges with introduced pentagons or heptagons could also be identified using Raman spectroscopy, with characteristic bands appearing at 800-1200 cm^-1, following the introduction of either pentagons or heptagons on armchair edges. This precise spectroscopic identification of pentagons and heptagons in GNFs provides the groundwork for the analysis of graphene-related materials.

Structure Formation and Coupling Reactions of Hexaphenylbenzene and Its Brominated Analog

The on‐surface coupling of the prototypical precursor molecule for graphene nanoribbon synthesis, 6,11‐dibromo‐1,2,3,4‐tetraphenyltriphenylene (C₄₂Br₂H₂₆, TPTP), and its non‐brominated analog hexaphenylbenzene (C₄₂H₃₀, HPB), was investigated on coinage metal substrates as a function of thermal treatment. For HPB, which forms non‐covalent 2D monolayers at room temperature, a thermally induced transition of the monolayer's structure could be achieved by moderate annealing, which is likely driven by π‐bond formation. It is found that the dibrominated carbon positions of TPTP do not guide the coupling if the growth occurs on a substrate at temperatures that are sufficient to initiate C−H bond activation. Instead, similar one‐dimensional molecular structures are obtained for both types of precursors, HPB and TPTP.

Application and Suitability of Polymeric Materials as Insulators in Electrical Equipment

In this paper, the applications of thermoplastic, thermoset polymers, and a brief description of the functions of each subsystem are reviewed. The synthetic route and characteristics of polymeric materials are presented. The mechanical properties of polymers such as impact behavior, tensile test, bending test, and thermal properties like mold stress-relief distortion, generic thermal indices, relative thermal capability, and relative thermal index are mentioned. Furthermore, this paper covers the electrical behavior of polymers, mainly their dielectric strength. Different techniques for evaluating polymers’ suitability applied for electrical insulation are covered, such as partial discharge and high current arc resistance to ignition. The polymeric materials and processes used for manufacturing cables at different voltage ranges are described, and their applications to high voltage DC systems (HVDC) are discussed. The evolution and limitations of polymeric materials for electrical application and their advantages and future trends are mentioned. However, to reduce the high cost of filler networks and improve their technical properties, new techniques need to be developed. To overcome limitations associated with the accuracy of the techniques used for quantifying residual stresses in polymers, new techniques such as indentation are used with higher force at the stressed location.

Electronic properties of N-rich graphene nano-chevrons

Theoretical analysis based on density functional theory describes the microscopic origins of emerging electronic and magnetic properties in quasi-1D nitrogen-rich graphene nanoribbon structures with chevron-like (or wiggle-edged) configurations. The study focuses on systems with structural units composed of hexagonal graphitic units featuring one and two nitrogen atoms substituted in the graphitic structure, in positions contrasting with the more commonly considered pyridinic configurations. This type of substitution introduces nitrogen levels close to the Fermi level which in turn induce spin polarization depending on a number of structural features. We demonstrate that these systems present a broader set of electronic and magnetic behaviors relative to their pure hydrocarbon counterparts, with the possibility of engineering the electronic band gap strategically using different spin configurations and positions of the substituting nitrogen atoms.

Bottom-up synthesis of nitrogen-doped nanocarbons by a combination of metal catalysis and a solution plasma process

We aimed to develop the bottom-up synthesis of nanocarbons with specific functions from molecules without any leaving group, halogen atom and boronic acid, by employing a metal catalyst under solution plasma irradiation. Pyridine was used as a source of carbon. In the presence of a Pd catalyst, the plasma treatment enabled the synthesis of N-doped carbons with a pyridinic configuration, which worked as an active catalytic site for the oxygen reduction reaction.

Fjord-Edge Graphene Nanoribbons with Site-Specific Nitrogen Substitution

The synthesis of graphene nanoribbons (GNRs) that contain site-specifically substituted backbone heteroatoms is one of the essential goals that must be achieved in order to control the electronic properties of these next generation organic materials. We have exploited our recently reported solid-state topochemical polymerization/cyclization-aromatization strategy to convert the simple 1,4-bis(3-pyridyl)butadiynes 3a,b into the fjord-edge nitrogen-doped graphene nanoribbon structures 1a,b (fjord-edge N₂[8]GNRs). Structural assignments are confirmed by CP/MAS ¹³C NMR, Raman, and XPS spectroscopy. The fjord-edge N₂[8]GNRs 1a,b are promising precursors for the novel backbone nitrogen-substituted N₂[8]_AGNRs 2a,b. Geometry and band calculations on N₂[8]_AGNR 2c indicate that this class of nanoribbons should have unusual bonding topology and metallicity.

Redox Mechanisms in Li and Mg Batteries Containing Poly(phenanthrene quinone)/Graphene Cathodes using Operando ATR-IR Spectroscopy

The redox reaction mechanism of a poly(phenanthrene quinone)/graphene composite (PFQ/rGO) was investigated using operando attenuated total reflection infrared (ATR-IR) spectroscopy during cycling of Li and Mg batteries. The reference phenanthrene quinone and the Li and Mg salts of the hydroquinone monomers were synthesized and their IR spectra were measured. Additionally, IR spectra were calculated using DFT. A comparison of all three spectra allowed us to accurately assign the C=O and C-O- vibration bands and confirm the redox mechanism of the quinone/Li salt of hydroquinone, with radical anion formation as the intermediate product. PFQ/rGO also showed exceptional performance in an Mg battery: A potential of 1.8 V versus Mg/Mg2+ , maximum capacity of 186 mAh g-1 (335 Wh kg-1 of cathode material), and high capacity retention with only 8 % drop/100 cycles. Operando ATR-IR spectroscopy was performed in a Mg/organic system, revealing an analogous redox mechanism to a Li/organic cell.

On-Surface Synthesis of NBN-Doped Zigzag-Edged Graphene Nanoribbons

We report the first bottom‐up synthesis of NBN‐doped zigzag‐edged GNRs (NBN‐ZGNR1 and NBN‐ZGNR2) through surface‐assisted polymerization and cyclodehydrogenation based on two U‐shaped molecular precursors with an NBN unit preinstalled at the zigzag edge. The resultant zigzag‐edge topologies of GNRs are elucidated by high‐resolution scanning tunneling microscopy (STM) in combination with noncontact atomic force microscopy (nc‐AFM). Scanning tunneling spectroscopy (STS) measurements and density functional theory (DFT) calculations reveal that the electronic structures of NBN‐ZGNR1 and NBN‐ZGNR2 are significantly different from those of their corresponding pristine fully‐carbon‐based ZGNRs. Additionally, DFT calculations predict that the electronic structures of NBN‐ZGNRs can be further tailored to be gapless and metallic through one‐electron oxidation of each NBN unit into the corresponding radical cations. This work reported herein provides a feasible strategy for the synthesis of GNRs with stable zigzag edges yet tunable electronic properties.

Fabrication of single-crystalline gold nanowires on cellulose nanofibers

Cellulose nanofibers (CNF) are promising nanomaterials for functional inks and printed sensors, although the potential applications are currently limited by the available functionalization methods. This work outlines a convenient method to grow a novel and highly conductive network of single-crystalline gold nanowires (AuNW) on CNF for use in conductive inks and printed sensors. The CNF are able to reduce Au (III) precursors to Au (0) monomers and generate nucleation sites for the subsequent monomer-by-monomer growth of Au nanocrystals; sodium citrate is used to control the reduction kinetics and the crystal growth. The growth of these AuNW/CNF materials is a three-step process of redox reaction, isotropic nucleation and anisotropic crystallization: the morphology and crystal structure of Au nanocrystals on CNF can be controlled by adjusting the reaction temperature and concentrations of citrate and CNF. The AuNW/CNF materials obtained have been formulated into highly conductive and atmospherically stable inks for use in either directly writing or screen printing. We have demonstrated AuNW/CNF-printed sensors with highly controllable electrical conductivity as well as excellent stability against rinsing and immersion by water and ethanol.

Highly Selective Gas Sensors Based on Graphene Nanoribbons Grown by Chemical Vapor Deposition

Despite the recent advances in bottom-up synthesis of different kinds of atomically precise graphene nanoribbons (GNRs) with very diverse physical properties, the translation of these GNRs into electronic devices remains challenging. Among other factors, the electronic characterization of GNRs is hampered by their complex synthesis that often requires custom-made organic precursors and the need for their transfer to dielectric substrates compatible with the conventional device fabrication procedures. In this paper, we demonstrate that uniform electrically conductive GNR films can be grown on arbitrary high-temperature-resistant substrates, such as metals, Si/SiO₂, or silica glasses, by a simple chemical vapor deposition (CVD) approach based on thermal decomposition of commercially available perylenetetracarboxylic dianhydride molecules. The results of spectroscopic and microscopic characterization of the CVD-grown films were consistent with the formation of oxygen-terminated N = 5 armchair GNRs. The CVD-grown nanoribbon films exhibited an ambipolar electric field effect and low on-off ratios, which were in agreement with the predicted metallic properties of N = 5 armchair GNRs, and remarkable gas sensing properties to a variety of volatile organic compounds (VOCs). We fabricated a GNR-based electronic nose system that could reliably recognize VOCs from different chemical classes including alcohols (methanol, ethanol, and isopropanol) and amines (n-butylamine, diethylamine, and triethylamine). The simplicity of the described CVD approach and its compatibility with the conventional device fabrication procedures, as well as the demonstrated sensitivity of the GNR devices to a variety of VOCs, warrant further investigation of CVD-grown nanoribbons for sensing applications.

Templated Synthesis of End-Functionalized Graphene Nanoribbons through Living Ring-Opening Alkyne Metathesis Polymerization

Atomically precise bottom-up synthesized graphene nanoribbons (GNRs) are promising candidates for next-generation electronic materials. The incorporation of these highly tunable semiconductors into complex device architectures requires the development of synthetic tools that provide control over the absolute length, the sequence, and the end groups of GNRs. Here, we report the living chain-growth synthesis of chevron-type GNRs (cGNRs) templated by a poly-(arylene ethynylene) precursor prepared through ring-opening alkyne metathesis polymerization (ROAMP). The strained triple bonds of a macrocyclic monomer serve both as the site of polymerization and the reaction center for an annulation reaction that laterally extends the conjugated backbone to give cGNRs with predetermined lengths and end groups. The structural control provided by a living polymer-templated synthesis of GNRs paves the way for their future integration into hierarchical assemblies, sequence-defined heterojunctions, and well-defined single-GNR transistors via block copolymer templates.

Distinguishing Zigzag and Armchair Edges on Graphene Nanoribbons by X-ray Photoelectron and Raman Spectroscopies

Graphene nanoribbons (GNRs) have recently emerged as alternative 2D semiconductors owing to their fascinating electronic properties that include tunable band gaps and high charge-carrier mobilities. Identifying the atomic-scale edge structures of GNRs through structural investigations is very important to fully understand the electronic properties of these materials. Herein, we report an atomic-scale analysis of GNRs using simulated X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. Tetracene with zigzag edges and chrysene with armchair edges were selected as initial model structures, and their XPS and Raman spectra were analyzed. Structurally expanded nanoribbons based on tetracene and chrysene, in which zigzag and armchair edges were combined in various ratios, were then simulated. The edge structures of chain-shaped nanoribbons composed only of either zigzag edges or armchair edges were distinguishable by XPS and Raman spectroscopy, depending on the edge type. It was also possible to distinguish planar nanoribbons consisting of both zigzag and armchair edges with zigzag/armchair ratios of 4:1 or 1:4, indicating that it is possible to analyze normally synthesized GNRs because their zigzag to armchair edge ratios are usually greater than 4 or less than 0.25. Our study on the precise identification of GNR edge structures by XPS and Raman spectroscopy provides the groundwork for the analysis of GNRs.

Nanographene and Graphene Nanoribbon Synthesis via Alkyne Benzannulations

The extension of π-conjugation of polycyclic aromatic hydrocarbons (PAHs) via alkyne benzannulation reactions has become an increasingly utilized tool over the past few years. This short review will highlight recent work of alkyne benzannulations in the context of large nanographene as well as graphene nanoribbon synthesis along with a brief discussion of the interesting physical properties these molecules display.

Boron-Doped Graphene Nanoribbons: Electronic Structure and Raman Fingerprint

We investigate the electronic and vibrational properties of bottom-up synthesized aligned armchair graphene nanoribbons of N = 7 carbon atoms width periodically doped by substitutional boron atoms (B-7AGNRs). Using angle-resolved photoemission spectroscopy and density functional theory calculations, we find that the dopant-derived valence and conduction band states are notably hybridized with electronic states of Au substrate and spread in energy. The interaction with the substrate leaves the bands with pure carbon character rather unperturbed. This results in an identical effective mass of ≈0.2 m₀ for the next-highest valence band compared with pristine 7AGNRs. We probe the phonons of B-7AGNRs by ultrahigh-vacuum (UHV) Raman spectroscopy and reveal the existence of characteristic splitting and red shifts in Raman modes due to the presence of substitutional boron atoms. Comparing the Raman spectra for three visible lasers (red, green, and blue), we find that interaction with gold suppresses the Raman signal from B-7AGNRs and the energy of the green laser (2.33 eV) is closer to the resonant E₂₂ transition. The hybridized electronic structure of the B-7AGNR-Au interface is expected to improve electrical characteristics of contacts between graphene nanoribbon and Au. The Raman fingerprint allows the easy identification of B-7AGNRs, which is particularly useful for device fabrication.

Phenyl Functionalization of Atomically Precise Graphene Nanoribbons for Engineering Inter-ribbon Interactions and Graphene Nanopores

Graphene nanoribbons (GNRs) attract much attention from researchers due to their tunable physical properties and potential for becoming nanoscale building blocks of electronic devices. GNRs can be synthesized with atomic precision by on-surface approaches from specially designed molecular precursors. While a considerable number of ribbons with very diverse structures and properties have been demonstrated in recent years, there have been only limited examples of on-surface synthesized GNRs modified with functional groups. In this study, we designed a nanoribbon, in which the chevron GNR backbone is decorated with phenyl functionalities, and demonstrate the on-surface synthesis of these GNRs on Au(111). We show that the phenyl modification affects the assembly of the GNR polymer precursors through π-π interactions. Scanning tunneling spectroscopy of the modified GNRs on Au(111) revealed that they have a band gap of 2.50 ± 0.02 eV, which is comparable to that of the parent chevron GNR. The phenyl functionalization leads to a shift of the band edges to lower energies, suggesting that it could be a useful tool for the GNR band structure engineering. We also investigated lateral fusion of the phenyl-modified GNRs and demonstrate that it could be used to engineer different kinds of atomically precise graphene nanopores. A similar functionalization approach could be potentially applied to other GNRs to affect their on-surface assembly, modify their electronic properties, and realize graphene nanopores with a variety of structures.

Oxygen, sulfur and selenium terminated single-walled heterocyclic carbon nanobelts (SWHNBs) as potential 3D organic semiconductors

Carbon nanomaterials such as polyaromatic hydrocarbons (PAHs), graphene, fullerenes and nanotubes are on the frontline of materials research due to their excellent physical properties, which in recent years, have started to compete with conventional inorganic materials in charge transfer based applications. Recently, a variety of new structures such as single-walled carbon nanobelts (SWCNBs) have been conceived, however, to date only one 'all-phenyl' example has been synthesised, due to problems with their stability and the challenging synthetic methodologies required. This study introduces a new class of phenacene-based SWCNBs and their chalcogenide derivatives, forming the new sub-class of single-walled heterocyclic carbon nanobelts (SWHNBs) which are expected to be both more stable and easier to synthesise than the all carbon analogues. Subsequent theoretical examination of the structure-property relationships found that unlike the small-molecule acene homologues (tetracene, pentacene etc.) which become more reactive with addition of oxygen, an increase in the molecular size of the SWCNBs actually stabilises the HOMO energy level, in correlation with the increasingly negative nuclear independent chemical shift (NICS) calculations of their cylindrical aromaticities. The FMO energies of the phenacene SWCNBs are similar to that of the nanobelt reported by Itami and co-workers, but those of the SWHNBs are deeper and thus more stable. The sulfur derivative of one SWHNB was found to give hole-charge transfer mobilities as high as 1.12 cm2 V-1 s-1, which is three orders of magnitude larger than the corresponding unsubstituted SWCNB (3 × 10-3 cm2 V-1 s-1). These findings suggest the candidates are air-stable and potentially high-performing organic semiconductors for organic thin film transistor (OTFT) devices, while the structure-property relationships uncovered here will aid the design and synthesis of future three-dimensional organic nanomaterials.

Epitaxial growth of aligned atomically precise chevron graphene nanoribbons on Cu(111)

Atomically precise chevron graphene nanoribbons (GNRs) have been synthesized on Cu(111) substrates by the surface-assisted coupling of 6,11-dibromo-1,2,3,4-tetraphenyltriphenylene (C₄₂Br₂H₂₆) and thermal cyclodehydrogenation of the resulting polymer. The GNRs form on Cu(111) epitaxially along the 〈112〉 crystallographic directions, which was found to be in agreement with the computational results, and at lower temperatures than on Au(111). This work demonstrates that the substrate plays an important role in the on-surface synthesis of GNRs and can result in new assembly modes of GNR structures.

Cationic Nitrogen-Doped Helical Nanographenes

Herein, we report the design and synthesis of a series of novel cationic nitrogen-doped nanographenes (CNDNs) with nonplanar geometry and axial chirality. Single-crystal X-ray analysis reveals helical and cove-edged structures. Compared to their all-carbon analogues, the frontier orbitals of the CNDNs are energetically lower lying, with a reduced optical energy gap and greater electron-accepting behavior. Cyclic voltammetry shows all the derivatives to undergo quasireversible reductions. In situ spectroelectrochemical studies prove that, depending on the number of nitrogen dopants, either neutral radicals (one nitrogen dopant) or radical cations (two nitrogen dopants) are formed upon reduction. The concept of cationic nitrogen doping and introducing helicity into nanographenes paves the way for the design and synthesis of expanded nanographenes or even graphene nanoribbons with cationic nitrogen dopants.

Laterally extended atomically precise graphene nanoribbons with improved electrical conductivity for efficient gas sensing

Narrow atomically precise graphene nanoribbons hold great promise for electronic and optoelectronic applications, but the previously demonstrated nanoribbon-based devices typically suffer from low currents and mobilities. In this study, we explored the idea of lateral extension of graphene nanoribbons for improving their electrical conductivity. We started with a conventional chevron graphene nanoribbon, and designed its laterally extended variant. We synthesized these new graphene nanoribbons in solution and found that the lateral extension results in decrease of their electronic bandgap and improvement in the electrical conductivity of nanoribbon-based thin films. These films were employed in gas sensors and an electronic nose system, which showed improved responsivities to low molecular weight alcohols compared to similar sensors based on benchmark graphitic materials, such as graphene and reduced graphene oxide, and a reliable analyte recognition. This study shows the methodology for designing new atomically precise graphene nanoribbons with improved properties, their bottom-up synthesis, characterization, processing and implementation in electronic devices.

Atomically precise graphene nanoribbons are a promising platform for tailored electron transport, yet they suffer from low conductivity. Here, the authors devise a strategy to laterally extend conventional chevron nanoribbons, thus achieving increased electrical conductivity and improved chemical sensing capabilities.

Nitrogen-Mediated Graphene Oxide Enables Highly Efficient Proton Transfer

Two-dimensional (2D) graphene and graphene oxide (GO) offer great potential as a new type of cost-efficient proton-exchange membranes (PEM) for electrochemical devices. However, fundamental issues of proton transfer mechanism via 2D membranes are unclear and the transfer barrier for perfect graphene are too high for practical application. Using ab initio molecular dynamic simulations, we screened the proton transfer barrier for different un-doped and nitrogen doped GO membranes, and clarified the corresponding transfer mechanisms. More significantly, we further identify that N-mediated GO can be built into a highly efficient PEM with a proton transfer rate of seven orders of magnitude higher than an un-doped case via. a proton relay mechanism between a ketone-like oxygen and a pyridine-like nitrogen across the vacancy site. The N-doped 2D GO is also impermeable to small molecules, and hence a highly efficient PEM for practical applications.

Solution Synthesis of Atomically Precise Graphene Nanoribbons

Bottom-up fabrication of narrow strips of graphene, also known as graphene nanoribbons or GNRs, is an attractive way to open a bandgap in semimetallic graphene. In this chapter, we review recent progress in solution-based synthesis of GNRs with atomically precise structures. We discuss a variety of atomically precise GNRs and highlight theoretical and practical aspects of their structural design and solution synthesis. These GNRs are typically synthesized through a polymerization of rationally designed molecular precursors followed by a planarization through a cyclodehydrogenation reaction. We discuss various synthetic techniques for polymerization and planarization steps, possible approaches for chemical modification of GNRs, and compare the properties of GNRs that could be achieved by different synthetic methods. We also discuss the importance of the rational design of molecular precursors to avoid isomerization during the synthesis and achieve GNRs that have only one possible structure. Significant attention in this chapter is paid to the methods of material characterization of solution-synthesized GNRs. The chapter is concluded with the discussion of the most significant challenges in the field and the future outlook.

Soluble Graphene Nanoribbons from Planarization of Oligophenylenes

A solution-based chemical synthesis of two graphene nanoribbons with armchair edges is reported. The precursor oligophenylene molecules are synthesized and subjected to oxidative cyclodehydrogenation to afford the target molecules, G-1 and G-2. These molecules have good solubility in organic solvents, and show a large redshift in their absorption edge (up to 185 nm) and emission maximum (up to 125 nm) after planarization. Fibrous structures are formed upon self-assembly of molecules through columnar π-π stacking. Such molecular assemblies may be useful for various applications.

Solution-Synthesized Chevron Graphene Nanoribbons Exfoliated onto H:Si(100)

There has been tremendous progress in designing and synthesizing graphene nanoribbons (GNRs). The ability to control the width, edge structure, and dopant level with atomic precision has created a large class of accessible electronic landscapes for use in logic applications. One of the major limitations preventing the realization of GNR devices is the difficulty of transferring GNRs onto nonmetallic substrates. In this work, we developed a new approach for clean deposition of solution-synthesized atomically precise chevron GNRs onto H:Si(100) under ultrahigh vacuum. A clean transfer allowed ultrahigh-vacuum scanning tunneling microscopy (STM) to provide high-resolution imaging and spectroscopy and reveal details of the electronic structure of chevron nanoribbons that have not been previously reported. We also demonstrate STM nanomanipulation of GNRs, characterization of multilayer GNR cross-junctions, and STM nanolithography for local depassivation of H:Si(100), which allowed us to probe GNR-Si interactions and revealed a semiconducting-to-metallic transition. The results of STM measurements were shown to be in good agreement with first-principles computational modeling.

Interfacial Self-Assembly of Atomically Precise Graphene Nanoribbons into Uniform Thin Films for Electronics Applications

Because of their intriguing electronic and optical properties, atomically precise graphene nanoribbons (GNRs) are considered to be promising materials for electronics and photovoltaics. However, significant aggregation and low solubility of GNRs in conventional solvents result in their poor processability for materials characterization and device studies. In this paper, we demonstrate a new fabrication approach for large-scale uniform thin films of nonfunctionalized atomically precise chevron-type GNRs. The method is based on (1) the exceptional solubility of graphitic materials in chlorosulfonic acid and (2) the original interfacial self-assembly approach by which uniform films that are single-GNR (∼2 nm) thick can be routinely prepared. These films can be transferred to various substrates including Si/SiO₂ and used for the streamlined fabrication of arrays of GNR-based devices. The described self-assembly approach should be applicable to other types of solution-synthesized atomically precise GNRs as well as large polyaromatic hydrocarbon (PAH) molecules and therefore should facilitate and streamline their device characterization.

Aggregation of atomically precise graphene nanoribbons

Atomically precise chevron graphene nanoribbons can form bulk π–π stacked aggregates as well as few-μm-long one-dimensional structures on surfaces that could be used for electronic device fabrication.