Functional inks and printing of two-dimensional materials

3D-bioprinting of MXenes: Developments, medical applications, challenges, and future roadmap

MXenes is a member of 2D transition metals carbides and nitrides with promising application prospects in energy storage, sensing, nanomedicine, tissue engineering, catalysis, and electronics. In the current era, MXenes have been widely applied in biomedical applications due to their unique rheological and electrochemical attributes. They have a larger surface area with more active sites, higher conductivity, lower cytotoxicity, and greater biocompatibility, making them highly suitable candidates for in-vivo biomedical applications. Due to recent advancemnets in MXenes 3D bioprinting, they are widely applied in regenerative medicine to combat challenges in suitable transplantation of tissues and organs. However, 3D bioprinting of MXenes has several complexities based on cell type, cytotoxicity, cell viability, and differentiation. To address these intricacies, surface modifications of MXene materials are done, which makes them highly fascinating for the 3D printing of tissues and organs. In the current review, we summarized recent progress in 3D bioprinting of MXene materials to construct scaffolds with desired rheological and biological properties, focusing on their potential applications in cancer phototherapy, tissue engineering, bone regeneration, and biosensing. We also discussed parameters affecting their biomedical applications and possible solutions by applying surface modifications. In addition, we addressed current challenges and future roadmaps for 3D bioprinting of MXene materials, such as generating high throughput 3D printed tissue constructs, drug delivery, drug discovery, and toxicology.

3D-Printing of Freestanding Pure MXene Microarchitectures

Since their discovery, titanium-based MXenes (Ti3C2Tx) have attracted significant attention. Several studies have presented versatile, cost-effective, and scalable approaches for fabricating Ti3C2Tx-based functional components. However, most previous studies only allowed the realization of 2D patterns or required diverse additives to produce 3D architectures. Herein, a 3D-Printing approach for producing 3D microarchitectures composed entirely of Ti3C2Tx. Ti3C2Tx additive-free aqueous ink consists of 0.1 wt.% Ti3C2Tx nanosheets is proposed. The diameter (ds) of the printed Ti3C2Tx 3D microarchitectures can be determined by controlling the meniscus channel size, which is influenced by the diameter (dp) of the micropipette opening and pipette-pulling rate (v). Through optimized control of the pipette, a minimum ds of 1.3 µm is obtained, and complex shapes such as zigzag, helix, bridge, and pyramid shapes can be implemented. To demonstrate the feasibility of realizing functional Ti3C2Tx 3D components, three electrical components are demonstrated: 3D micro-interconnects and 3D transducers for photodetectors and humidity sensors. It is believed that this facile approach can be used for nano 3D-Printing as well as micro printing of Ti3C2Tx architectures.

Morphotaxial Halogenation of Solution-Processed Two-Dimensional Indium Selenide

Morphotaxy, a process by which a 2D material is chemically modified while retaining its original physical dimensions, is an emerging strategy for synthesizing unconventional materials at the atomically thin limit. Morphotaxy is typically implemented by vapor-phase reactions on mechanically exfoliated or vapor-deposited 2D van der Waals (vdW) materials. Here we report a method for converting solution-processed films of 2D InSe into InI2 and InBr2 using dilute I2 and Br2 solutions, respectively. The converted materials retain the physical dimensions of the original 2D flakes, providing access to non-vdW indium halides in ultrathin form. Liquid-phase exfoliation directly enables this morphotaxial reaction by producing nanosheets with high surface areas and introducing residual polyvinylpyrrolidone that stabilizes the flake morphology and slows the reactivity of I2 and Br2. Overall, this work presents a versatile strategy for achieving atomically thin metal halides and offers mechanistic insights relevant to the morphotaxial halogenation of other solution-processed 2D materials.

GO-Enhanced MXene Sediment-Based Inks Achieve Remarkable Oxidation Resistance and High Conductivity

MXenes are emerging materials renowned for their exceptional conductivity, abundant functional groups, and excellent solution processability, making them highly promising as conductive-additive-free inks for flexible electronic devices. However, current preparation methods are hampered by low yields of MXene flakes so that substantial waste MXene sediments (MS) are generated. Here, we demonstrate a type of conductive ink with appropriate rheological properties, namely MG inks formulated using MS and graphene oxide (GO), for screen-printing frequency selective surface (FSS). GO facilitates interlayer interactions by covalently cross-linking with MXene flakes, resulting in a denser structure and significantly enhancing the conductivity of the best-performing MG-based ink to 849 S cm-1. Additionally, GO serves as a binder to considerably improve the rheological properties of MS, thus enabling high-quality printing on various substrates. The close stacking of MS and GO not only improves the oxidation resistance but also maintains conductivity above 97% even after 60 days. Furthermore, the MG-based FSS produced via straightforward screen printing demonstrates excellent performance and retains its functionality after 90 days of operation. This MS-based ink formulation represents a strategy of "turning trash into treasure" and highlights the potential of MS for the next generation of electronic devices.

Low-Temperature Chemical Solution Deposition of Bi2O2Se on Amorphous Surface for Dynamic Memristor of Physical Reservoir Array

Bismuth oxyselenide (Bi2O2Se) stands as a highly promising layered semiconductor with outstanding optical, electrical, and thermal properties. For the practical application of the material toward the devices, growing Bi2O2Se directly on the amorphous substrate at low temperatures (<400 °C) is essential; however, the negatively charged bottom Se layer originating from alternating stacks of Se2- and [Bi2O2]2+ has hindered this process. In this work, we report the method for synthesizing a Bi2O2Se film on amorphous alumina (AlOx) directly at 350 °C by using chemical solution deposition. Our key strategy is to enhance the wettability of bismuth precursor solutions with the oxide first and then to selenize Bi2O3 in the gas phase. CSD-grown Bi2O2Se at 350 °C shows a uniform crystalline quality and chemical stoichiometry. Furthermore, we explore the applicability of Bi2O2Se toward dynamic memristors of a physical reservoir of reservoir computing systems. The fabricated Ag/Bi2O2Se/AlOx/Al-stacked dynamic memristors exhibit volatile memory properties, showing reasonable cycle-to-cycle and device-to-device variations that ensure reliability of the device operation. Intriguingly, the devices show programmable decay time in the range of microseconds to milliseconds depending on the pulse widths of different scales. Our work reveals an approach to grow Bi2O2Se films on versatile substrates that have great potential for future electronics, especially for low-temperature memristive applications.

Thermal-solutal-induced bistability of evaporating multicomponent liquid thin films

Volatile multicomponent liquid films show rich dynamics, due to the complex interplay of gradients in temperature and in solute concentrations. Here, we study the evaporation dynamics of a tricomponent liquid film, consisting of water, ethanol, and trans-anethole oil (known as "ouzo"). With the preferential evaporation of ethanol, cellular convective structures are observed both in the thermal patterns and in the nucleated oil droplet patterns. However, the feature sizes of these two patterns can differ, indicating dual instability mechanisms dominated by either temperature or solute concentration. Using numerical simulations, we quantitatively compare the contributions of temperature and solute concentration on the surface tension. Our results reveal that the thermal Marangoni effect predominates at the initial evaporation stage, resulting in cellular patterns in thermal images, while the solutal Marangoni effect gradually becomes dominant. By regulating the transition time of this thermal-solutal-induced bistability and the nucleation time of oil microdroplets in the ternary mixture, the oil droplet patterns can be well controlled. This capability not only enhances our understanding of the evaporation dynamics but also paves the way for precise manipulation of nucleation and deposition processes at larger scales.

High-Resolution Self-Assembly of Functional Materials and Microscale Devices via Selective Plasma Induced Surface Energy Programming

Current technologies preclude effective and efficient self-assembly of heterogeneous arrangements of functional materials between 10-1 and 10-5 m. Consequently, their fabrication is dominated by methods of direct material manipulation, which struggle to meet the designers' demands regarding resolution, material freedom, production time, and cost. A two-step, computer-controlled is presented, multi-material self-assembly technique that allows heterogenous patterns of several centimeters with features down to 12.5 µm in size. First, a micro plasma jet selectively programs the surface energy of a polydimethylsiloxane substrate through localized chemical functionalization. Second, polar fluids containing functional materials are simplistically introduced which then self-assemble according to the patterned regions of high surface energy over timescales of the order of seconds. In-process control enables both high-resolution patterning and high throughput. This approach is demonstrated to produce heterogenous patterns of materials with varying conductive, magnetic, and mechanical properties. These include magneto-mechanical films and flexible electronic devices with unprecedented processing times and economy for high-resolution patterns. This self-assembly approach can disrupt the current lithography/direct write paradigm that dominates micro/meso-fabrication, enabling the next generation of devices across a broad range of fields via a flexible, industrially scalable, and environmentally friendly manufacturing route.

Recent Advances in Salt-Assisted Synthesis of 2D Materials

Two-dimensional (2D) materials have been attracting extensive interest due to their remarkable chemical, optical, electrical, and magnetic properties, making them ideal candidates for a broad range of applications. Developing facile synthesis methods that can fabricate high-quality 2D materials in an efficient, scalable, and cost-effective way is essential. Among the emerging techniques, salt-assisted methods to synthesize 2D materials, including molten salt method, salt-assisted chemical vapor deposition, and salt-template method, has demonstrated significant potential in fulfilling these requirements. This review highlights recent advancements in the synthesis of 2D materials through salt-assisted methods, focusing on their preparation processes and wide-ranging applications. It also explores the role of salts, in various forms, in directing the formation of 2D structures, providing insights for strategic synthesis design. Finally, challenges and future directions in salt-assisted synthesis are discussed, emphasizing strategies to enable controllable, high-yield production of 2D materials.

Droplet-Pen Writing of Ultra-Uniform Graphene Pattern for Multi-Spectral Applications

Artificial optical patterns bring wide benefits in applications like structural color display, photonic camouflage, and electromagnetic cloak. Their scalable coating on large-scale objects will greatly enrich the multimodal-interactive society. Here, a droplet-pen writing (DPW) method to directly write multi-spectral patterns of thin-film graphene is reported. By amphiphilicity regulations of 2D graphene nanosheets, ultra-uniform and ultrathin films can spontaneously form on droplet caps and pave to the substrate, thus inducing optical interference. This allows the on-surface patterning by pen writing of droplets. Specifically, drop-on-demand thin films are achieved with millimeter lateral size and uniformity up to 97% in subwavelength thickness (<100 nm), corresponding to an aspect ratio of over 30 000. The pixelated thin-film patterns of disks and lines in an 8-inch wafer scale are demonstrated, which enable low-emittance structural color paintings. Furthermore, the applications of these patterns for dual-band camouflage and infrared-to-visible encryption are investigated. This study highlights the potential of 2D material self-assembly in the large-scale preparation and multi-spectral application of thin film-based optical patterns.

Fully Printed, High-Temperature Micro-Supercapacitor Arrays Enabled by a Hexagonal Boron Nitride Ionogel Electrolyte

The proliferation and miniaturization of portable electronics require energy-storage devices that are simultaneously compact, flexible, and amenable to scalable manufacturing. In this work, mechanically flexible micro-supercapacitor arrays are demonstrated via sequential high-speed screen printing of conductive graphene electrodes and a high-temperature hexagonal boron nitride (hBN) ionogel electrolyte. By combining the superlative dielectric properties of 2D hBN with the high ionic conductivity of ionic liquids, the resulting hBN ionogel electrolyte enables micro-supercapacitors with exceptional areal capacitances that approach 1 mF cm-2. Unlike incumbent polymer-based electrolytes, the high-temperature stability of the hBN ionogel electrolyte implies that the printed micro-supercapacitors can be operated at unprecedentedly high temperatures up to 180 °C. These elevated operating temperatures result in increased power densities that make these printed micro-supercapacitors particularly promising for applications in harsh environments such as underground exploration, aviation, and electric vehicles. The combination of enhanced functionality in extreme conditions and high-speed production via scalable additive manufacturing significantly broadens the technological phase space for on-chip energy storage.

Effects of Intercalation on ML-Ti3C2Tz MXene Properties and Friction Performance

Intercalation in two-dimensional (2D) materials can modify their physical, chemical, and electronic properties. This modification enables the tailoring of 2D material characteristics, enhancing their performance and expanding their applications in various fields. The friction performance of 2D materials such as MoS2 and graphite has a strong dependence on their interlayer spacing, and they exhibit an increase in d-spacing associated with a reduction in friction performance. The ability to control the interlayer spacing of Ti3C2Tz MXene has proven beneficial for energy storage applications such as batteries and supercapacitors, but no one has utilized this control of interlayer spacing for lubrication. In this study, we demonstrate that interlayer spacing of multilayer (ML) Ti3C2Tz MXene can be controlled through chemical intercalation and its direct effects on the electrical conductivity and friction performance. We observed a notable decrease in electrical conductivity in vacuum-filtered ML-Ti3C2Tz MXene films, which was attributed to an increased internal resistance resulting from the expansion of the interlayer gap. We also found a significant reduction in the coefficient of friction for ML-Ti3C2Tz MXene with an increased d-spacing. This reduction is attributed to a weakened attraction of individual ML-Ti3C2Tz MXene layers (intercalated). Under a tangential force, it becomes easier to slide within the larger interlayer gap with weakened van der Waals forces. This work provides insights into the tunability of MXene properties through interlayer spacing, offering potential applications requiring materials with specific electrical and friction characteristics.

Fully Printed Multilayer Ceramic Capacitors Based on High-k Perovskite Nanosheets

Printing technology enables the integration of chemically exfoliated perovskite nanosheets into high-performance microcapacitors. Theoretically, the capacitance value can be further enhanced by designing and constructing multilayer structures without increasing the device size. Yet, issues such as interlayer penetration in multilayer heterojunctions constructed using inkjet printing technology further limit the realization of this potential. Herein, a series of multilayer configurations, including Ag/(Ca2NaNb4O13/Ag)n and graphene/(Ca2NaNb4O13/graphene)n (n = 1-3), are successfully inkjet-printed onto diverse rigid and flexible substrates through optimized ink formulations, inkjet printing parameters, thermal treatment conditions, and rational multilayer structural design using high-k perovskite nanosheets, graphene nanosheets and silver. The dielectric performance is optimized by fine-tuning the number of dielectric layers and modifying the electrode/dielectric interface. As a result, the graphene/(Ca2NaNb4O13/graphene)3 multilayer ceramic capacitors exhibit a remarkable capacitance density of 346 ± 12 nF cm-2 and a high dielectric constant of 193 ± 18. Additionally, these devices demonstrate moderate insulation properties, flexibility, thermal stability, and chemical sensitivity. This work shed light on the potential of multilayer structural design in additive manufacturing of high-performance 2D material-based ceramic capacitors.

Flexible ammonium ion-selective electrode based on inkjet-printed graphene solid contact

Miniaturization and mass-production of potentiometric sensor systems is paving the way towards distributed environmental sensing, on-body measurements and industrial process monitoring. Inkjet printing is gaining popularity as a highly adaptable and scalable production technique. Presented here is a scalable and low-cost route for flexible solid-contact ammonium ion-selective electrode fabrication by inkjet printing. Utilization of inkjet-printed melamine-intercalated graphene nanosheets as the solid-contact material significantly improved charge transport, while evading the detrimental water-layer formation. External polarization was investigated as a means of improving the inter-electrode reproducibility: the standard deviations of E0 values were reduced after electrode polarization, the linear region of the response was extended to the range 10-1-10-6 M of NH4Cl and LODs reduced to 0.88 ± 0.17 μM. Finally, we have shown that the electrodes are adequate for measurements in a complex real sample: ammonium concentration was determined in landfill leachate water, with less than 4 % deviation from the reference method.

UV-assisted fluctuation-enhanced gas sensing by ink-printed MoS2 devices

In this work, MoS2 flakes were printed on ceramic substrates and investigated toward 1-10 ppm of nitrogen dioxide (NO2), 2-12 ppm of ammonia (NH3), and 2-12 ppm acetone (C3H6O) under UV light (275 nm). The structure of overlapping MoS2 flakes and UV light assistance affected high responsivity to NO2 when DC resistance was monitored, and superior sensitivity to NH3 was obtained from the low-frequency noise spectra. MoS2 exhibited response and recovery times in hundreds of seconds and stability throughout the experiments conducted within a few months. MoS2 sensor exhibited a resistance drift during the detection of a specific relaxation time. Subtracting the baseline burden with exponential drift exposed the direction of changes induced by oxidizing and reducing gases and reduced DL to 80 ppb, 130 ppb, and 360 ppb for NO2, NH3, and C3H6O, respectively. The fluctuation-enhanced sensing (FES) revealed that the adsorption of NO2 on MoS2 decreases the noise intensity, whereas adsorbed NH3 increases the fluctuations of current flowing through the sensor, and these changes are proportional to the concentration of gases. The noise responses for NO2 and NH3 were opposite and higher than DC resistance responses with subtracted baseline (an increase of 50% for 10 ppm of NO2 and an increase of more than 600% for 12 ppm of NH3), showing that FES is a highly sensitive tool to detect and distinguish between these two gases. This way, we introduce a simple and low-cost method of gas sensor fabrication using ink-printed MoS2 and the possibility of enhancing its sensitivity through data processing and the FES method.

Planar Micro-Supercapacitors with High Power Density Screen-Printed by Aqueous Graphene Conductive Ink

Simple and scalable production of micro-supercapacitors (MSCs) is crucial to address the energy requirements of miniature electronics. Although significant advancements have been achieved in fabricating MSCs through solution-based printing techniques, the realization of high-performance MSCs remains a challenge. In this paper, graphene-based MSCs with a high power density were prepared through screen printing of aqueous conductive inks with appropriate rheological properties. High electrical conductivity (2.04 × 104 S∙m-1) and low equivalent series resistance (46.7 Ω) benefiting from the dense conductive network consisting of the mesoporous structure formed by graphene with carbon black dispersed as linkers, as well as the narrow finger width and interspace (200 µm) originating from the excellent printability, prompted the fully printed MSCs to deliver high capacitance (9.15 mF∙cm-2), energy density (1.30 µWh∙cm-2) and ultrahigh power density (89.9 mW∙cm-2). Notably, the resulting MSCs can effectively operate at scan rates up to 200 V∙s-1, which surpasses conventional supercapacitors by two orders of magnitude. In addition, the MSCs demonstrate excellent cycling stability (91.6% capacity retention and ~100% Coulombic efficiency after 10,000 cycles) and extraordinary mechanical properties (92.2% capacity retention after 5000 bending cycles), indicating their broad application prospects in flexible wearable/portable electronic systems.

Quantifying the effect of nanosheet dimensions on the piezoresistive response of printed graphene nanosheet networks

Printed networks of 2D nanosheets have found a range of applications in areas including electronic devices, energy storage systems and sensors. For example, the ability to print graphene networks onto flexible substrates enables the production of high-performance strain sensors. The network resistivity is known to be sensitive to the nanosheet dimensions which implies the piezoresistance might also be size-dependent. In this study, the effect of nanosheet thickness on the piezoresistive response of nanosheet networks has been investigated. To achieve this, we liquid-exfoliated graphene nanosheets which were then subjected to centrifugation-based size selection followed by spray deposition onto flexible substrates. The resultant devices show increasing resistivity and gauge factor with increasing nanosheet thickness. We analyse the resistivity versus thickness data using a recently reported model and develop a new model to fit the gauge factor versus thickness data. This analysis allowed us to differentiate between the effect of strain on inter-nanosheet junctions and the straining of the individual nanosheets within the network. Surprisingly, our data implies the nanosheets themselves to display a negative piezo response.

Growth of Single Crystalline 2D Materials beyond Graphene on Non-metallic Substrates

The advent of 2D materials has ushered in the exploration of their synthesis, characterization and application. While plenty of 2D materials have been synthesized on various metallic substrates, interfacial interaction significantly affects their intrinsic electronic properties. Additionally, the complex transfer process presents further challenges. In this context, experimental efforts are devoted to the direct growth on technologically important semiconductor/insulator substrates. This review aims to uncover the effects of substrate on the growth of 2D materials. The focus is on non-metallic substrate used for epitaxial growth and how this highlights the necessity for phase engineering and advanced characterization at atomic scale. Special attention is paid to monoelemental 2D structures with topological properties. The conclusion is drawn through a discussion of the requirements for integrating 2D materials with current semiconductor-based technology and the unique properties of heterostructures based on 2D materials. Overall, this review describes how 2D materials can be fabricated directly on non-metallic substrates and the exploration of growth mechanism at atomic scale.

Two-Dimensional Tunneling Memtransistor with Thin-Film Heterostructure for Low-Power Logic-in-Memory Complementary Metal-Oxide Semiconductor

With the demand for high-performance and miniaturized semiconductor devices continuously rising, the development of innovative tunneling transistors via efficient stacking methods using two-dimensional (2D) building blocks has paramount importance in the electronic industry. Hence, 2D semiconductors with atomically thin geometries hold significant promise for advancements in electronics. In this study, we introduced tunneling memtransistors with a thin-film heterostructure composed of 2D semiconducting MoS2 and WSe2. Devices with the dual function of tuning and memory operation were realized by the gate-regulated modulation of the barrier height at the heterojunction and manipulation of intrinsic defects within the exfoliated nanoflakes using solution processes. Further, our investigation revealed extensive edge defects and four distinct defect types, namely monoselenium vacancies, diselenium vacancies, tungsten vacancies, and tungsten adatoms, in the interior of electrochemically exfoliated WSe2 nanoflakes. Additionally, we constructed complementary metal-oxide semiconductor-based logic-in-memory devices with a small static power in the range of picowatts using the developed tunneling memtransistors, demonstrating a promising approach for next-generation low-power nanoelectronics.

Spray-lithography of hybrid graphene-perovskite paper-based photodetectors for sustainable electronics

Paper is an ideal substrate for the development of flexible and environmentally sustainable ubiquitous electronic systems. When combined with nanomaterial-based devices, it can be harnessed for various Internet-of-Things applications, ranging from wearable electronics to smart packaging. However, paper remains a challenging substrate for electronics due to its rough and porous nature. In addition, the absence of established fabrication methods is impeding its utilization in wearable applications. Unlike other paper-based electronics with added layers, in this study, we present a scalable spray-lithography on a commercial paper substrate. We present a non-vacuum spray-lithography of chemical vapor deposition (CVD) single-layer graphene (SLG), carbon nanotubes (CNTs) and perovskite quantum dots (QDs) on a paper substrate. This approach combines the advantages of two large-area techniques: CVD and spray-coating. The first technique allows for the growth of SLG, while the second enables the spray coating of a mask to pattern CVD SLG, electrodes (CNTs), and photoactive (QDs) layers. We harness the advantages of perovskite QDs in photodetection, leveraging their strong absorption coefficients. Integrating them with the graphene enhances the photoconductive gain mechanism, leading to high external responsivity. The presented device shows high external responsivity of ∼520 A W-1at 405 nm at <1 V bias due to the photoconductive gain mechanism. The prepared paper-based photodetectors (PDs) achieve an external responsivity of 520 A W-1under 405 nm illumination at <1 V operating voltage. To the best of our knowledge, our devices have the highest external responsivity among paper-based PDs. By fabricating arrays of PDs on a paper substrate in the air, this work highlights the potential of this scalable approach for enabling ubiquitous electronics on paper.

Advances in stabilization of metallic nanoparticle with biosurfactants- a review on current trends

Recently, research based on new biomaterials for stabilizing metallic nanoparticles has increased due to their greater environmental friendliness and lower health risk. Their stability is often a critical factor influencing their performance and shelf life. Nowadays, the use of biosurfactants is gaining interest due to their sustainable advantages. Biosurfactants are used for various commercial and industrial applications such as food processing, therapeutic applications, agriculture, etc. Biosurfactants create stable coatings surrounding nanoparticles to stop agglomeration and provide long-term stability. The present review study describes a collection of important scientific works on stabilization and capping of metallic nanoparticles as biosurfactants. This review also provides a comprehensive overview of the intrinsic properties and environmental aspects of metal nanoparticles coated with biosurfactants. In addition, future methods and potential solutions for biosurfactant-mediated stabilization in nanoparticle synthesis are also highlighted. The objective of this study is to ensure that the stabilized nanoparticles exhibit biocompatible properties, making them suitable for applications in medicine and biotechnology.

Inkjet Printing of Long-Range Ordering Two-Dimensional Magnetic Ti0.8Co0.2O2 Film

The value of two-dimensional (2D) materials in printed electronics has been gradually explored, and the rheological properties of 2D material dispersions are very different for various printing technologies. Understanding the rheological properties of 2D material dispersions plays a vital role in selecting the optimal manufacturing technology. Inkjet printing is suitable for small nanosheet sizes and low solution viscosity, and it has a significant advantage in developing nanosheet inks because of its masklessness, high efficiency, and high precision. In this work, we selected 2D Ti0.8Co0.2O2 nanosheets, which can be synthesized in large quantities by the liquid phase exfoliation technique; investigated the effects of nanosheet particle size, solution concentration on the rheological properties of the dispersion; and obtained the optimal printing processing method of the dispersion as inkjet printing. The ultrathin Ti0.8Co0.2O2 nanosheet films were prepared by inkjet printing, and their magnetic characteristics were compared with those of Ti0.8Co0.2O2 powder. The films prepared by inkjet printing exhibited long-range ordering, maintaining the nanosheet powders' paramagnetic characteristics. Our work underscored the potential of inkjet printing as a promising method for fabricating precisely controlled thin films using 2D materials, with applications spanning electronics, sensors, and catalysis.

Solution-Processable and Printable Two-Dimensional Transition Metal Dichalcogenide Inks

Two-dimensional (2D) transition metal dichalcogenides (TMDs) with layered crystal structures have been attracting enormous research interest for their atomic thickness, mechanical flexibility, and excellent electronic/optoelectronic properties for applications in diverse technological areas. Solution-processable 2D TMD inks are promising for large-scale production of functional thin films at an affordable cost, using high-throughput solution-based processing techniques such as printing and roll-to-roll fabrications. This paper provides a comprehensive review of the chemical synthesis of solution-processable and printable 2D TMD ink materials and the subsequent assembly into thin films for diverse applications. We start with the chemical principles and protocols of various synthesis methods for 2D TMD nanosheet crystals in the solution phase. The solution-based techniques for depositing ink materials into solid-state thin films are discussed. Then, we review the applications of these solution-processable thin films in diverse technological areas including electronics, optoelectronics, and others. To conclude, a summary of the key scientific/technical challenges and future research opportunities of solution-processable TMD inks is provided.

Innovative Graphene-Based Nanocomposites for Improvement of Electrochemical Sensors: Synthesis, Characterization, and Applications

Graphene, renowned for its exceptional physicochemical attributes, has emerged as a favored substrate for integrating a wide array of inorganic and organic materials in scientific endeavors and innovations. Electrochemical graphene-based nanocomposite sensors have been developed by incorporating diverse nanoparticles into graphene, effectively immobilized onto electrodes through various techniques. These graphene-based nanocomposite sensors have effectively detected and quantified various electroactive species in samples. This review delves into using graphene nanocomposites to fabricate electrochemical sensors, leveraging the exceptional electrical, mechanical, and thermal properties inherent to graphene derivatives. These nanocomposites showcase electrocatalytic activity, substantial surface area, superior electrical conductivity, adsorption capabilities, and notable porosity, which are highly advantageous for sensing applications. A myriad of characterization techniques, including Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), BET surface area analysis, and X-ray diffraction (XRD), have proven effective in exploring the properties of graphene nanocomposites and validating the adjustable formation of these nanomaterials with graphene. The applicability of these sensors across various matrices, encompassing environmental, food, and biological domains, has been evaluated through electrochemical measurements, such as cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). This review provides a comprehensive overview of synthesis methods, characterization techniques, and sensor applications pertinent to graphene-based nanocomposites. Furthermore, it deliberates on the challenges and future prospects within this burgeoning field.

Printable and flexible integrated sensing systems for wireless healthcare

The rapid development of wearable sensing devices and artificial intelligence has enabled portable and wireless tracking of human health, fulfilling the promise of digitalized healthcare applications. To achieve versatile design and integration of multi-functional modules including sensors and data transmission units onto various flexible platforms, printable technologies emerged as some of the most promising strategies. This review first introduces the commonly utilized printing technologies, followed by discussion of the printable ink formulations and flexible substrates to ensure reliable device fabrication and system integration. The advances of printable sensors for body status monitoring are then discussed. Moreover, the integration of wireless data transmission via printable approaches is also presented. Finally, the challenges in achieving printable sensing devices and wireless integrated systems with competitive performances are considered, so as to realize their practical applications for personalized healthcare.

The status and challenging perspectives of 3D-printed micro-batteries

In the era of the Internet of Things and wearable electronics, 3D-printed micro-batteries with miniaturization, aesthetic diversity and high aspect ratio, have emerged as a recent innovation that solves the problems of limited design diversity, poor flexibility and low mass loading of materials associated with traditional power sources restricted by the slurry-casting method. Thus, a comprehensive understanding of the rational design of 3D-printed materials, inks, methods, configurations and systems is critical to optimize the electrochemical performance of customizable 3D-printed micro-batteries. In this review, we offer a key overview and systematic discussion on 3D-printed micro-batteries, emphasizing the close relationship between printable materials and printing technology, as well as the reasonable design of inks. Initially, we compare the distinct characteristics of various printing technologies, and subsequently emphatically expound the printable components of micro-batteries and general approaches to prepare printable inks. After that, we focus on the outstanding role played by 3D printing design in the device architecture, battery configuration, performance improvement, and system integration. Finally, the future challenges and perspectives concerning high-performance 3D-printed micro-batteries are adequately highlighted and discussed. This comprehensive discussion aims at providing a blueprint for the design and construction of next-generation 3D-printed micro-batteries.

Tailoring functional two-dimensional nanohybrids: A comprehensive approach for enhancing photocatalytic remediation

Photocatalysis is gaining prominence as a viable alternative to conventional biohazard treatment technologies. Two-dimensional (2D) nanomaterials have become crucial for fabricating novel photocatalysts due to their nanosheet architectures, large surface areas, and remarkable physicochemical properties. Furthermore, a variety of applications are possible with 2D nanomaterials, either in combination with other functional nanoparticles or by utilizing their inherent properties. Henceforth, the review commences its exploration into the synthesis of these materials, delving into their inherent properties and assessing their biocompatibility. Subsequently, an overview of mechanisms involved in the photocatalytic degradation of pollutants and the processes related to antimicrobial action is presented. As an integral part of our review, we conduct a systematic analysis of existing challenges and various types of 2D nanohybrid materials tailored for applications in the photocatalytic degradation of contaminants and the inactivation of pathogens through photocatalysis. This investigation will aid to contribute to the formulation of decision-making criteria and design principles for the next generation of 2D nanohybrid materials. Additionally, it is crucial to emphasize that further research is imperative for advancing our understanding of 2D nanohybrid materials.

Annealing Ti3C2Tz MXenes to Control Surface Chemistry and Friction

Although surface terminations (such as ═O, -Cl, -F, and -OH) on MXene nanosheets strongly influence their functional properties, synthesis of MXenes with desired types and distribution of those terminations is still challenging. Here, it is demonstrated that thermal annealing helps in removing much of the terminal groups of molten salt-etched multilayered (ML) Ti3C2Tz. In this study, the chloride terminations of molten salt-etched ML-Ti3C2Tz were removed via thermal annealing at increased temperatures under an inert (argon) atmosphere. This thermal annealing created some bare sites available for further functionalization of Ti3C2Tz. XRD, EDS, and XPS measurements confirm the removal of much of the terminal groups of ML-Ti3C2Tz. Here, the annealed ML-Ti3C2Tz was refunctionalized by -OH groups and 3-aminopropyl triethoxysilane (APTES), which was confirmed by FTIR. The -OH and APTES surface-modified ML-Ti3C2Tz are evaluated as a solid lubricant, exhibiting ∼70.1 and 66.7% reduction in friction compared to a steel substrate, respectively. This enhanced performance is attributed to the improved interaction or adhesion of functionalized ML-Ti3C2Tz with the substrate material. This approach allows for the effective surface modification of MXenes and control of their functional properties.

MXene-Based Micro-Supercapacitors: Ink Rheology, Microelectrode Design and Integrated System

MXenes have shown great potential for micro-supercapacitors (MSCs) due to the high metallic conductivity, tunable interlayer spacing and intercalation pseudocapacitance. In particular, the negative surface charge and high hydrophilicity of MXenes make them suitable for various solution processing strategies. Nevertheless, a comprehensive review of solution processing of MXene MSCs has not been conducted. In this review, we present a comprehensive summary of the state-of-the-art of MXene MSCs in terms of ink rheology, microelectrode design and integrated system. The ink formulation and rheological behavior of MXenes for different solution processing strategies, which are essential for high quality printed/coated films, are presented. The effects of MXene and its compounds, 3D electrode structure, and asymmetric design on the electrochemical properties of MXene MSCs are discussed in detail. Equally important, we summarize the integrated system and intelligent applications of MXene MSCs and present the current challenges and prospects for the development of high-performance MXene MSCs.

Advances in Printed Electronic Textiles

Electronic textiles (e-textiles) have emerged as a revolutionary solution for personalized healthcare, enabling the continuous collection and communication of diverse physiological parameters when seamlessly integrated with the human body. Among various methods employed to create wearable e-textiles, printing offers unparalleled flexibility and comfort, seamlessly integrating wearables into garments. This has spurred growing research interest in printed e-textiles, due to their vast design versatility, material options, fabrication techniques, and wide-ranging applications. Here, a comprehensive overview of the crucial considerations in fabricating printed e-textiles is provided, encompassing the selection of conductive materials and substrates, as well as the essential pre- and post-treatments involved. Furthermore, the diverse printing techniques and the specific requirements are discussed, highlighting the advantages and limitations of each method. Additionally, the multitude of wearable applications made possible by printed e-textiles is explored, such as their integration as various sensors, supercapacitors, and heated garments. Finally, a forward-looking perspective is provided, discussing future prospects and emerging trends in the realm of printed wearable e-textiles. As advancements in materials science, printing technologies, and design innovation continue to unfold, the transformative potential of printed e-textiles in healthcare and beyond is poised to revolutionize the way wearable technology interacts and benefits.

Advanced inorganic nanomaterials for high-performance electrochromic applications

Electrochromic materials and devices with the capability of dynamic optical regulation have attracted considerable attention recently and have shown a variety of potential applications including energy-efficient smart windows, multicolor displays, atuto-diming mirrors, military camouflage, and adaptive thermal management due to the advantages of active control, wide wavelength modulation, and low energy consumption. However, its development still experiences a number of issues such as long response time and inadequate durability. Nanostructuring has demonstrated that it is an effective strategy to improve the electrochromic performance of the materials due to the increased reaction active sites and the reduced ion diffusion distance. Various advanced inorganic nanomaterials with high electrochromic performance have been developed recently, significantly contributing to the development of electrochromic applications. In this review, we systematically introduce and discuss the recent advances in advanced inorganic nanomaterials including zero-, one-, and two-dimensional materials for high-performance electrochromic applications. Finally, we outline the current major challenges and our perspectives for the future development of nanostructured electrochromic materials and applications.

Water-Soluble Quantum Dots for Inkjet Printing Color Conversion Films with Simultaneous High Efficiency and Stability

Water-soluble quantum dots (QDs) are necessary to prepare patterned pixels or films for high-resolution displays with less environmental burden but are very limited by the trade-off between photoluminescence and stability of QDs. In this work, we proposed synthesizing water-soluble QDs with simultaneous excellent luminescence properties and high stability by coating the amphiphilic poly(maleic anhydride-alt-1-octadecene)-ethanol amine (PMAO-EA) polymer on the surface of silane-treated QDs. These coated QDs show a photoluminescence quantum yield (PLQY) as high as 94%, and they have good photoluminescence stability against light irradiation and thermal attacks, owing to the suppression of the nonradiative recombination by the polymer layer and the isolation of oxygen and water by the silica layer. The water-soluble QDs, mixed with ethylene glycol, enable inkjet printing of QD color conversion films (QD-CCFs) with an average diameter of 68 μm for each pixel and a high PLQY of 91%. The QD-CCFs are demonstrated to fabricate red-emitting mini-LEDs by combining with blue mini-LED chips, which have an external quantum efficiency as high as 25.86% and a luminance of 2.44 × 107 cd/m2. We believe that the proposed strategy is applicable to other water-soluble QDs and paves an avenue for inkjet printing environmentally friendly QD-CCFs for mini/micro-LED displays.

New Advances in Antenna Design toward Wearable Devices Based on Nanomaterials

Wearable antennas have recently garnered significant attention due to their attractive properties and potential for creating lightweight, compact, low-cost, and multifunctional wireless communication systems. With the breakthrough progress in nanomaterial research, the use of lightweight materials has paved the way for the widespread application of wearable antennas. Compared with traditional metallic materials like copper, aluminum, and nickel, nanoscale entities including zero-dimensional (0-D) nanoparticles, one-dimensional (1-D) nanofibers or nanotubes, and two-dimensional (2-D) nanosheets exhibit superior physical, electrochemical, and performance characteristics. These properties significantly enhance the potential for constructing durable electronic composites. Furthermore, the antenna exhibits compact size and high deformation stability, accompanied by greater portability and wear resistance, owing to the high surface-to-volume ratio and flexibility of nanomaterials. This paper systematically discusses the latest advancements in wearable antennas based on 0-D, 1-D, and 2-D nanomaterials, providing a comprehensive overview of their development and future prospects in the field.

Defect-Engineered Semiconducting van der Waals Thin Film at Metal-Semiconductor Interface of Field-Effect Transistors

The significance of metal-semiconductor interfaces and their impact on electronic device performance have gained increasing attention, with a particular focus on investigating the contact metal. However, another avenue of exploration involves substituting the contact metal at the metal-semiconductor interface of field-effect transistors with semiconducting layers to introduce additional functionalities to the devices. Here, a scalable approach for fabricating metal-oxide-semiconductor (channel)-semiconductor (interfacial layer) field-effect transistors is proposed by utilizing solution-processed semiconductors, specifically semiconducting single-walled carbon nanotubes and molybdenum disulfide, as the channel and interfacial semiconducting layers, respectively. The work function of the interfacial MoS2 is modulated by controlling the sulfur vacancy concentration through chemical treatment, which results in distinctive energy band alignments within a single device configuration. The resulting band alignments lead to multiple functionalities, including multivalued transistor characteristics and multibit nonvolatile memory (NVM) behavior. Moreover, leveraging the stable NVM properties, we demonstrate artificial synaptic devices with 88.9% accuracy of MNIST image recognition.

van der Waals 2D transition metal dichalcogenide/organic hybridized heterostructures: recent breakthroughs and emerging prospects of the device

The near-atomic thickness and organic molecular systems, including organic semiconductors and polymer-enabled hybrid heterostructures, of two-dimensional transition metal dichalcogenides (2D-TMDs) can modulate their optoelectronic and transport properties outstandingly. In this review, the current understanding and mechanism of the most recent and significant breakthrough of novel interlayer exciton emission and its modulation by harnessing the band energy alignment between TMDs and organic semiconductors in a TMD/organic (TMDO) hybrid heterostructure are demonstrated. The review encompasses up-to-date device demonstrations, including field-effect transistors, detectors, phototransistors, and photo-switchable superlattices. An exploration of distinct traits in 2D-TMDs and organic semiconductors delves into the applications of TMDO hybrid heterostructures. This review provides insights into the synthesis of 2D-TMDs and organic layers, covering fabrication techniques and challenges. Band bending and charge transfer via band energy alignment are explored from both structural and molecular orbital perspectives. The progress in emission modulation, including charge transfer, energy transfer, doping, defect healing, and phase engineering, is presented. The recent advancements in 2D-TMDO-based optoelectronic synaptic devices, including various 2D-TMDs and organic materials for neuromorphic applications are discussed. The section assesses their compatibility for synaptic devices, revisits the operating principles, and highlights the recent device demonstrations. Existing challenges and potential solutions are discussed. Finally, the review concludes by outlining the current challenges that span from synthesis intricacies to device applications, and by offering an outlook on the evolving field of emerging TMDO heterostructures.

Large area inkjet-printed OLED fabrication with solution-processed TADF ink

This work demonstrates successful large area inkjet printing of a thermally activated delayed fluorescence (TADF) material as the emitting layer of organic light-emitting diodes (OLEDs). TADF materials enable efficient light emission without relying on heavy metals such as platinum or iridium. However, low-cost manufacturing of large-scale TADF OLEDs has been restricted due to their incompatibility with solution processing techniques. In this study, we develop ink formulation for a TADF material and show successful ink jet printing of intricate patterns over a large area (6400 mm2) without the use of any lithography. The stable ink is successfully achieved using a non-chlorinated binary solvent mixture for a solution processable TADF material, 3-(9,9-dimethylacridin-10(9H)-yl)-9H-xanthen-9-one dispersed in 4,4'-bis-(N-carbazolyl)-1,1'-biphenyl host. Using this ink, large area ink jet printed OLEDs with performance comparable to the control spin coated OLEDs are successfully achieved. In this work, we also show the impact of ink viscosity, density, and surface tension on the droplet formation and film quality as well as its potential for large-area roll-to-roll printing on a flexible substrate. The results represent a major step towards the use of TADF materials for large-area OLEDs without employing any lithography.

p-Type Two-Dimensional Semiconductors: From Materials Preparation to Electronic Applications

Two-dimensional (2D) materials are regarded as promising candidates in many applications, including electronics and optoelectronics, because of their superior properties, including atomic-level thickness, tunable bandgaps, large specific surface area, and high carrier mobility. In order to bring 2D materials from the laboratory to industrialized applications, materials preparation is the first prerequisite. Compared to the n-type analogs, the family of p-type 2D semiconductors is relatively small, which limits the broad integration of 2D semiconductors in practical applications such as complementary logic circuits. So far, many efforts have been made in the preparation of p-type 2D semiconductors. In this review, we overview recent progresses achieved in the preparation of p-type 2D semiconductors and highlight some promising methods to realize their controllable preparation by following both the top-down and bottom-up strategies. Then, we summarize some significant application of p-type 2D semiconductors in electronic and optoelectronic devices and their superiorities. In end, we conclude the challenges existed in this field and propose the potential opportunities in aspects from the discovery of novel p-type 2D semiconductors, their controlled mass preparation, compatible engineering with silicon production line, high-κ dielectric materials, to integration and applications of p-type 2D semiconductors and their heterostructures in electronic and optoelectronic devices. Overall, we believe that this review will guide the design of preparation systems to fulfill the controllable growth of p-type 2D semiconductors with high quality and thus lay the foundations for their potential application in electronics and optoelectronics.

Printable Energy Storage: Stay or Go?

In the era of rapidly evolving smart electronic devices, the development of power supplies with miniaturization and versatility is imperative. Prevailing manufacturing approaches for basic energy modules impose limitations on their size and shape design. Printing is an emerging technique to fabricate energy storage systems with tailorable mass loading and compelling energy output, benefiting from elaborate structural configurations and unobstructed charge transports. The derived "printable energy storage" realm is now focusing on materials exploration, ink formulation, and device construction. This contribution aims to illustrate the current state-of-the-art in printable energy storage and identify the existing challenges in the 3D printing design of electrodes. Insights into the future outlooks and directions for the development of this field are provided, with the goal of enabling printable energy storage toward practical applications.

Electroluminescence from Megasonically Solution-Processed MoS2 Nanosheet Films

Due to their superior optoelectronic properties, monolayer two-dimensional (2D) transition metal dichalcogenides (TMDs) have attracted significant attention for electroluminescent devices. However, challenges in isolating optoelectronically active TMD monolayers using scalable liquid phase exfoliation have precluded electroluminescence in large-area, solution-processed TMD films. Here, we overcome these limitations and demonstrate electroluminescence from molybdenum disulfide (MoS2) nanosheet films by employing a monolayer-rich MoS2 ink produced by electrochemical intercalation and megasonic exfoliation. Characteristic monolayer MoS2 photoluminescence and electroluminescence spectral peaks at 1.88-1.90 eV are observed in megasonicated MoS2 films, with the emission intensity increasing with film thickness over the range 10-70 nm. Furthermore, employing a vertical light-emitting capacitor architecture enables uniform electroluminescence in large-area devices. These results indicate that megasonically exfoliated MoS2 monolayers retain their direct bandgap character in electrically percolating thin films even following multistep solution processing. Overall, this work establishes megasonicated MoS2 inks as an additive manufacturing platform for flexible, patterned, and miniaturized light sources that can likely be expanded to other TMD semiconductors.

In Situ Filler Addition for Homogeneous Dispersion of Carbon Nanotubes in Multi Jet Fusion-Printed Elastomer Composites

The dispersibility of fillers determines their effect on the mechanical properties and anisotropy of the 3D-printed polymeric composites. Nanoscale fillers have the tendency to aggregate, resulting in the deterioration of part performance. An in situ filler addition method using the newly developed dual-functional toughness agents (TAs) is proposed in this work for the homogeneous dispersion of carbon nanotubes (CNTs) in elastomer composites printed via multi jet fusion. The CNTs added in the TAs serve as an infrared absorbing colorant for selective powder fusion, as well as the strengthening and toughening fillers. The printability of the TA is theoretically deduced based on the measured physical properties, which are subsequently verified experimentally. The printing parameters and agent formulation are optimized to maximize the mechanical performance of the printed parts. The printed elastomer parts show significant improvement in strength and toughness for all printing orientations and alleviation of the mechanical anisotropy originating from the layer-wise fabrication manner. This in situ filler addition method using tailorable TAs is applicable for fabricating parts with site-specific mechanical properties and is promising in assisting the scalable manufacturing of 3D-printed elastomers.

Aerosol-Jet-Printable Covalent Organic Framework Colloidal Inks and Temperature-Sensitive Nanocomposite Films

With molecularly well-defined and tailorable 2D structures, covalent organic frameworks (COFs) have emerged as leading material candidates for chemical sensing, storage, separation, and catalysis. In these contexts, the ability to directly and deterministically print COFs into arbitrary geometries will enable rapid optimization and deployment. However, previous attempts to print COFs have been restricted by low spatial resolution and/or post-deposition polymerization that limits the range of compatible COFs. Here, these limitations are overcome with a pre-synthesized, solution-processable colloidal ink that enables aerosol jet printing of COFs with micron-scale resolution. The ink formulation utilizes the low-volatility solvent benzonitrile, which is critical to obtaining homogeneous printed COF film morphologies. This ink formulation is also compatible with other colloidal nanomaterials, thus facilitating the integration of COFs into printable nanocomposite films. As a proof-of-concept, boronate-ester COFs are integrated with carbon nanotubes (CNTs) to form printable COF-CNT nanocomposite films, in which the CNTs enhance charge transport and temperature sensing performance, ultimately resulting in high-sensitivity temperature sensors that show electrical conductivity variation by 4 orders of magnitude between room temperature and 300 °C. Overall, this work establishes a flexible platform for COF additive manufacturing that will accelerate the incorporation of COFs into technologically significant applications.

A Review on Progress, Challenges, and Prospects of Material Jetting of Copper and Tungsten

Copper (Cu) and tungsten (W) possess exceptional electrical and thermal conductivity properties, making them suitable candidates for applications such as interconnects and thermal conductivity enhancements. Solution-based additive manufacturing (SBAM) offers unique advantages, including patterning capabilities, cost-effectiveness, and scalability among the various methods for manufacturing Cu and W-based films and structures. In particular, SBAM material jetting techniques, such as inkjet printing (IJP), direct ink writing (DIW), and aerosol jet printing (AJP), present a promising approach for design freedom, low material wastes, and versatility as either stand-alone printers or integrated with powder bed-based metal additive manufacturing (MAM). Thus, this review summarizes recent advancements in solution-processed Cu and W, focusing on IJP, DIW, and AJP techniques. The discussion encompasses general aspects, current status, challenges, and recent research highlights. Furthermore, this paper addresses integrating material jetting techniques with powder bed-based MAM to fabricate functional alloys and multi-material structures. Finally, the factors influencing large-scale fabrication and potential prospects in this area are explored.

Controlling Microparticle Morphology in Melt-Jet Printing of Active Pharmaceutical Ingredients through Surface Phenomena

Achieving homogeneity and reproducibility in the size, shape, and morphology of active pharmaceutical ingredient (API) particles is crucial for their successful manufacturing and performance. Herein, we describe a new method for API particle engineering using melt-jet printing technology as an alternative to the current solvent-based particle engineering methods. Paracetamol, a widely used API, was melted and jetted as droplets onto various surfaces to solidify and form microparticles. The influence of different surfaces (glass, aluminum, polytetrafluoroethylene, and polyethylene) on particle shape was investigated, revealing a correlation between substrate properties (heat conduction, surface energy, and roughness) and particle sphericity. Higher thermal conductivity, surface roughness, and decreased surface energy contributed to larger contact angles and increased sphericity, reaching a near-perfect micro-spherical shape on an aluminum substrate. The integrity and polymorphic form of the printed particles were confirmed through differential scanning calorimetry and X-ray diffraction. Additionally, high-performance liquid chromatography analysis revealed minimal degradation products. The applicability of the printing process to other APIs was demonstrated by printing carbamazepine and indomethacin on aluminum surfaces, resulting in spherical microparticles. This study emphasizes the potential of melt-jet printing as a promising approach for the precise engineering of pharmaceutical particles, enabling effective control over their physiochemical properties.

MXene Contact Engineering for Printed Electronics

MXenes emerging as an amazing class of 2D layered materials, have drawn great attention in the past decade. Recent progress suggest that MXene-based materials have been widely explored as conductive electrodes for printed electronics, including electronic and optoelectronic devices, sensors, and energy storage systems. Here, the critical factors impacting device performance are comprehensively interpreted from the viewpoint of contact engineering, thereby giving a deep understanding of surface microstructures, contact defects, and energy level matching as well as their interaction principles. This review also summarizes the existing challenges of MXene inks and the related printing techniques, aiming at inspiring researchers to develop novel large-area and high-resolution printing integration methods. Moreover, to effectually tune the states of contact interface and meet the urgent demands of printed electronics, the significance of MXene contact engineering in reducing defects, matching energy levels, and regulating performance is highlighted. Finally, the printed electronics constructed by the collaborative combination of the printing process and contact engineering are discussed.

All-MXene-Printed RF Resonators as Wireless Plant Wearable Sensors for In Situ Ethylene Detection

Printed flexible electronics have emerged as versatile functional components of wearable intelligent devices that bridge the digital information networks with biointerfaces. Recent endeavors in plant wearable sensors provide real-time and in situ insights to study phenotyping traits of crops, whereas monitoring of ethylene, the fundamental phytohormone, remains challenging due to the lack of flexible and scalable manufacturing of plant wearable ethylene sensors. Here the all-MXene-printed flexible radio frequency (RF) resonators are presented as plant wearable sensors for wireless ethylene detection. The facile formation of additive-free MXene ink enables rapid, scalable manufacturing of printed electronics, demonstrating decent printing resolution (2.5% variation), ≈30000 S m^-1 conductivity and mechanical robustness. Incorporation of MXene-reduced palladium nanoparticles (MXene@PdNPs) facilitates 1.16% ethylene response at 1 ppm with 0.084 ppm limit of detection. The wireless sensor tags are attached on plant organ surfaces for in situ and continuously profiling of plant ethylene emission to inform the key transition of plant biochemistry, potentially extending the application of printed MXene electronics to enable real-time plant hormone monitoring for precision agriculture and food industrial management.

Centrifuge-Free Separation of Solution-Exfoliated 2D Nanosheets via Cross-Flow Filtration

Solution-processed graphene is a promising material for numerous high-volume applications including structural composites, batteries, sensors, and printed electronics. However, the polydisperse nature of graphene dispersions following liquid-phase exfoliation poses major manufacturing challenges, as incompletely exfoliated graphite flakes must be removed to achieve optimal properties and downstream performance. Incumbent separation schemes rely on centrifugation, which is highly energy-intensive and limits scalable manufacturing. Here, cross-flow filtration (CFF) is introduced as a centrifuge-free processing method that improves the throughput of graphene separation by two orders of magnitude. By tuning membrane pore sizes between microfiltration and ultrafiltration length scales, CFF can also be used for efficient recovery of solvents and stabilizing polymers. In this manner, life cycle assessment and techno-economic analysis reveal that CFF reduces greenhouse gas emissions, fossil energy usage, water consumption, and specific production costs of graphene manufacturing by 57%, 56%, 63%, and 72%, respectively. To confirm that CFF produces electronic-grade graphene, CFF-processed graphene nanosheets are formulated into printable inks, leading to state-of-the-art thin-film conductivities exceeding 10⁴ S m^-1 . This CFF methodology can likely be generalized to other van der Waals layered solids, thus enabling sustainable manufacturing of the diverse set of applications currently being pursued for 2D materials.

Recent advances in inkjet-printing technologies for flexible/wearable electronics

The rapid development of flexible/wearable electronics requires novel fabricating strategies. Among the state-of-the-art techniques, inkjet printing has aroused considerable interest due to the possibility of large-scale fabricating flexible electronic devices with good reliability, high time efficiency, a low manufacturing cost, and so on. In this review, based on the working principle, recent advances in the inkjet printing technology in the field of flexible/wearable electronics are summarized, including flexible supercapacitors, transistors, sensors, thermoelectric generators, wearable fabric, and for radio frequency identification. In addition, some current challenges and future opportunities in this area are also addressed. We hope this review article can give positive suggestions to the researchers in the area of flexible electronics.

Water-based 2-dimensional anatase TiO2 inks for printed diodes and transistors

2-Dimensional (2D) materials are attracting strong interest in printed electronics because of their unique properties and easy processability, enabling the fabrication of devices with low cost and mass scalable methods such as inkjet printing. For the fabrication of fully printed devices, it is of fundamental importance to develop a printable dielectric ink, providing good insulation and the ability to withstand large electric fields. Hexagonal boron nitride (h-BN) is typically used as a dielectric in printed devices. However, the h-BN film thickness is usually above 1 μm, hence limiting the use of h-BN in low-voltage applications. Furthermore, the h-BN ink is composed of nanosheets with broad lateral size and thickness distributions, due to the use of liquid-phase exfoliation (LPE). In this work, we investigate anatase TiO₂ nanosheets (TiO₂-NS), produced by a mass scalable bottom-up approach. We formulate the TiO₂-NS into a water-based and printable solvent and demonstrate the use of the material with sub-micron thickness in printed diodes and transistors, hence validating the strong potential of TiO₂-NS as a dielectric for printed electronics.

Electrochemical Replication and Transfer for Low-Cost, Sub-100 nm Patterning of Materials on Flexible Substrates

The fabrication of high-resolution patterns on flexible substrates is an essential step in the development of flexible electronics. However, the patterning process on flexible substrates often requires expensive equipment and tedious lithographic processing. Here, a bottom-up patterning technique, termed electrochemical replication and transfer (ERT) is reported, which fabricates multiscale patterns of a wide variety of materials by selective electrodeposition of target materials on a predefined template, and subsequent transfer of the electrodeposited materials to a flexible substrate, while leaving the undamaged template for reuse for over 100 times. The additive and parallel patterning attribute of ERT allows the fabrication of multiscale patterns with resolutions spanning from sub-100 nm to many centimeters simultaneously, which overcomes the trade-off between resolution and throughput of conventional patterning techniques. ERT is suitable for fabricating a wide variety of materials including metals, semiconductors, metal oxides, and polymers into arbitrary shapes on flexible substrates at a very low cost.

High-Performance Solution-Processed 2D P-Type WSe2 Transistors and Circuits through Molecular Doping

Semiconducting ink based on 2D single-crystal flakes with dangling-bond-free surfaces enables the implementation of high-performance devices on form-free substrates by cost-effective and scalable printing processes. However, the lack of solution-processed p-type 2D semiconducting inks with high mobility is an obstacle to the development of complementary integrated circuits. Here, a versatile strategy of doping with Br₂ is reported to enhance the hole mobility by orders of magnitude for p-type transistors with 2D layered materials. Br₂ -doped WSe₂ transistors show a field-effect hole mobility of more than 27 cm²  V^-1  s^-1 , and a high on/off current ratio of ≈10⁷ , and exhibits excellent operational stability during the on-off switching, cycling, and bias stressing testing. Moreover, complementary inverters composed of patterned p-type WSe₂ and n-type MoS₂ layered films are demonstrated with an ultra-high gain of 1280 under a driving voltage (V_DD ) of 7 V. This work unveils the high potential of solution-processed 2D semiconductors with low-temperature processability for flexible devices and monolithic circuitry.