Calcium protects a mesophilic xylanase from proteinase inactivation and thermal unfolding

Paecilomyces variotii xylanase production, purification and characterization with antioxidant xylo-oligosaccharides production

Paecilomyces variotii xylanase was, produced in stirred tank bioreactor with yield of 760 U/mL and purified using 70% ammonium sulfate precipitation and ultra-filtration causing 3.29-fold purification with 34.47% activity recovery. The enzyme purity was analyzed on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) confirming its monomeric nature as single band at 32 KDa. Zymography showed xylan hydrolysis activity at the same band. The purified enzyme had optimum activity at 60 °C and pH 5.0. The pH stability range was 5-9 and the temperature stability was up 70 °C. Fe²⁺and Fe³⁺ exhibited inhibition of xylanase enzyme while Cu²⁺, Ca²⁺, Mg²⁺ and Mn²⁺ stimulated its activity. Mercaptoethanol stimulated its activity; however, Na₂-EDTA and SDS inhibited its activity. The purified xylanase could hydrolyze beechwood xylan but not carboxymethyl cellulose (CMC), avicel or soluble starch. Paecilomyces variotii xylanase K_m and V_max for beechwood were determined to be 3.33 mg/mL and 5555 U/mg, respectively. The produced xylanase enzyme applied on beech xylan resulted in different types of XOS. The antioxidant activity of xylo-oligosaccharides increased from 15.22 to 70.57% when the extract concentration was increased from 0.1 to 1.5 mg/mL. The enzyme characteristics and kinetic parameters indicated its high efficiency in the hydrolysis of xylan and its potential effectiveness in lignocellulosic hydrolysis and other industrial application. It also suggests the potential of xylanase enzyme for production of XOS from biomass which are useful in food and pharmaceutical industries.

Heterologous expression and functional characterization of a GH10 endoxylanase from Aspergillus fumigatus var. niveus with potential biotechnological application

Xylanases decrease the xylan content in pretreated biomass releasing it from hemicellulose, thus improving the accessibility of cellulose for cellulases. In this work, an endo-β-1,4-xylanase from Aspergillus fumigatus var. niveus (AFUMN-GH10) was successfully expressed. The structural analysis and biochemical characterization showed this AFUMN-GH10 does not contain a carbohydrate-binding module. The enzyme retained its activity in a pH range from 4.5 to 7.0, with an optimal temperature at 60 °C. AFUMN-GH10 showed the highest activity in beechwood xylan. The mode of action of AFUMN-GH10 was investigated by hydrolysis of APTS-labeled xylohexaose, which resulted in xylotriose and xylobiose as the main products. AFUMN-GH10 released 27% of residual xylan from hydrothermally-pretreated corn stover and 14% of residual xylan from hydrothermally-pretreated sugarcane bagasse. The results showed that environmentally friendly pretreatment followed by enzymatic hydrolysis with AFUMN-GH10 in low concentration is a suitable method to remove part of residual and recalcitrant hemicellulose from biomass.

Single-molecule Force Spectroscopy Reveals the Calcium Dependence of the Alternative Conformations in the Native State of a βγ-Crystallin Protein

Although multidomain proteins predominate the proteome of all organisms and are expected to display complex folding behaviors and significantly greater structural dynamics as compared with single-domain proteins, their conformational heterogeneity and its impact on their interaction with ligands are poorly understood due to a lack of experimental techniques. The multidomain calcium-binding βγ-crystallin proteins are particularly important because their deterioration and misfolding/aggregation are associated with melanoma tumors and cataracts. Here we investigate the mechanical stability and conformational dynamics of a model calcium-binding βγ-crystallin protein, Protein S, and elaborate on its interactions with calcium. We ask whether domain interactions and calcium binding affect Protein S folding and potential structural heterogeneity. Our results from single-molecule force spectroscopy show that the N-terminal (but not the C-terminal) domain is in equilibrium with an alternative conformation in the absence of Ca(2+), which is mechanically stable in contrast to other proteins that were observed to sample a molten globule under similar conditions. Mutagenesis experiments and computer simulations reveal that the alternative conformation of the N-terminal domain is caused by structural instability produced by the high charge density of a calcium binding site. We find that this alternative conformation in the N-terminal domain is diminished in the presence of calcium and can also be partially eliminated with a hitherto unrecognized compensatory mechanism that uses the interaction of the C-terminal domain to neutralize the electronegative site. We find that up to 1% of all identified multidomain calcium-binding proteins contain a similarly highly charged site and therefore may exploit a similar compensatory mechanism to prevent structural instability in the absence of ligand.

Molecular mechanisms associated with xylan degradation by Xanthomonas plant pathogens

Xanthomonas pathogens attack a variety of economically relevant plants, and their xylan CUT system (carbohydrate utilization with TonB-dependent outer membrane transporter system) contains two major xylanase-related genes, xynA and xynB, which influence biofilm formation and virulence by molecular mechanisms that are still elusive. Herein, we demonstrated that XynA is a rare reducing end xylose-releasing exo-oligoxylanase and not an endo-β-1,4-xylanase as predicted. Structural analysis revealed that an insertion in the β7-α7 loop induces dimerization and promotes a physical barrier at the +2 subsite conferring this unique mode of action within the GH10 family. A single mutation that impaired dimerization became XynA active against xylan, and high endolytic activity was achieved when this loop was tailored to match a canonical sequence of endo-β-1,4-xylanases, supporting our mechanistic model. On the other hand, the divergent XynB proved to be a classical endo-β-1,4-xylanase, despite the low sequence similarity to characterized GH10 xylanases. Interestingly, this enzyme contains a calcium ion bound nearby to the glycone-binding region, which is required for catalytic activity and structural stability. These results shed light on the molecular basis for xylan degradation by Xanthomonas and suggest how these enzymes synergistically assist infection and pathogenesis. Our findings indicate that XynB contributes to breach the plant cell wall barrier, providing nutrients and facilitating the translocation of effector molecules, whereas the exo-oligoxylanase XynA possibly participates in the suppression of oligosaccharide-induced immune responses.

The thermal stability of recoverin depends on calcium binding and its myristoyl moiety as revealed by infrared spectroscopy

To evaluate the structural stability of recoverin, a member of the neuronal calcium sensor family, the effect of temperature, myristoylation, and calcium:protein molar ratio on its secondary structure has been studied by transmission infrared spectroscopy. On the basis of the data, the protein predominantly adopts α-helical structures (∼50-55%) with turns, unordered structures, and β-sheets at 25 °C. The data show no significant impact of the presence of calcium and myristoylation on secondary structure. It is found that, in the absence of calcium, recoverin denatures and self-aggregates while being heated, with the formation of intermolecular antiparallel β-sheets. The nonmyristoylated protein (Rec-nMyr) exhibits a lower temperature threshold of aggregation and a higher intermolecular β-sheet content at 65 °C than the myristoylated protein (Rec-Myr). The former thus appears to be less thermally stable than the latter. In the presence of excess calcium ions (calcium:protein ratio of 10), the protein is thermally stable up to 65 °C with no significant conformational change, the presence of the myristoyl chain having no effect on the thermal stability of recoverin under these conditions. A decrease in the thermal stability of recoverin is observed as the calcium:protein molar ratio decreases, with Rec-nMyr being less stable than Rec-Myr. The data overall suggest that a minimal number of coordinated calcium ions is necessary to fully stabilize the structure of recoverin and that, when bound to the membrane, i.e., when the myristoyl chain protrudes from the interior pocket, recoverin should be more stable than in a Ca-free solution, i.e., when the myristoyl chain is sequestered in the interior.

Emerging role of N- and C-terminal interactions in stabilizing (β/α)8 fold with special emphasis on Family 10 xylanases

Xylanases belong to an important class of industrial enzymes. Various xylanases have been purified and characterized from a plethora of organisms including bacteria, marine algae, plants, protozoans, insects, snails and crustaceans. Depending on the source, the enzymatic activity of xylanases varies considerably under various physico-chemical conditions such as temperature, pH, high salt and in the presence of proteases. Family 10 or glycosyl hydrolase 10 (GH10) xylanases are one of the well characterized and thoroughly studied classes of industrial enzymes. The TIM-barrel fold structure which is ubiquitous in nature is one of the characteristics of family 10 xylanases. Family 10 xylanases have been used as a “model system” due to their TIM-barrel fold to dissect and understand protein stability under various conditions. A better understanding of structure-stability-function relationships of family 10 xylanases allows one to apply these governing molecular rules to engineer other TIM-barrel fold proteins to improve their stability and retain function(s) under adverse conditions. In this review, we discuss the implications of N-and C-terminal interactions, observed in family 10 xylanases on protein stability under extreme conditions. The role of metal binding and aromatic clusters in protein stability is also discussed. Studying and understanding family 10 xylanase structure and function, can contribute to our protein engineering knowledge.

Binding of bivalent ions to actinomycete mannanase is accompanied by conformational change and is a key factor in its thermal stability

The study aimed to define the key factors involved in the modulation of actinomycete mannanases. We focused on the roles of carbohydrate-binding modules (CBMs) and bivalent ions. To investigate the effects of these factors, two actinomycete mannanase genes were cloned from Streptomyces thermoluteus (StManII) and Streptomyces lividans (SlMan). CBMs fused to mannanase catalytic domains do not affect the thermal stability of the proteins. CBM2 of StManII increased the catalytic efficiency toward soluble-mannan and insoluble-mannan by 25%-36%, and CBM10 of SlMan increased the catalytic efficiency toward soluble-mannan by 40%-50%. Thermal stability of wild-type and mutant enzymes was enhanced by calcium and manganese. Thermal stability of SlMandC was also slightly enhanced by magnesium. These results indicated that bivalent ion-binding site responsible for thermal stability was in the catalytic domains. Thermal stability of mannanase differed in the kinds of bivalent ions. Isothermal titration calorimetry revealed that the catalytic domain of StManII bound bivalent ions with a K(a) of 5.39±0.45×10(3)-7.56±1.47×10(3)M(-1), and the catalytic domain of SlMan bound bivalent ions with a K(a) of 1.06±0.34×10(3)-3.86±0.94×10(3)M(-1). The stoichiometry of these bindings was consistent with one bivalent ion-binding site per molecule of enzyme. Circular dichroism spectrum revealed that the presence of bivalent ions induced changes in the secondary structures of the enzymes. The binding of certain bivalent ion responsible for thermal stability was accompanied by a different conformational change by each bivalent ion. Actinomycete mannanases belong to GHF5 which contained various hemicellulases; therefore, the information obtained from mannanases applies to the other enzymes.

Engineering hyperthermostability into a GH11 xylanase is mediated by subtle changes to protein structure

Understanding the structural basis for protein thermostability is of considerable biological and biotechnological importance as exemplified by the industrial use of xylanases at elevated temperatures in the paper pulp and animal feed sectors. Here we have used directed protein evolution to generate hyperthermostable variants of a thermophilic GH11 xylanase, EvXyn11. The Gene Site Saturation Mutagenesis (GSSM) methodology employed assesses the influence on thermostability of all possible amino acid substitutions at each position in the primary structure of the target protein. The 15 most thermostable mutants, which generally clustered in the N-terminal region of the enzyme, had melting temperatures (Tm) 1-8 degrees C higher than the parent protein. Screening of a combinatorial library of the single mutants identified a hyperthermostable variant, EvXyn11TS, containing seven mutations. EvXyn11TS had a Tm approximately 25 degrees C higher than the parent enzyme while displaying catalytic properties that were similar to EvXyn11. The crystal structures of EvXyn11 and EvXyn11TS revealed an absence of substantial changes to identifiable intramolecular interactions. The only explicable mutations are T13F, which increases hydrophobic interactions, and S9P that apparently locks the conformation of a surface loop. This report shows that the molecular basis for the increased thermostability is extraordinarily subtle and points to the requirement for new tools to interrogate protein folding at non-ambient temperatures.

Prediction of EF-hand calcium-binding proteins and analysis of bacterial EF-hand proteins

The EF-hand protein with a helix-loop-helix Ca(2+) binding motif constitutes one of the largest protein families and is involved in numerous biological processes. To facilitate the understanding of the role of Ca(2+) in biological systems using genomic information, we report, herein, our improvement on the pattern search method for the identification of EF-hand and EF-like Ca(2+)-binding proteins. The canonical EF-hand patterns are modified to cater to different flanking structural elements. In addition, on the basis of the conserved sequence of both the N- and C-terminal EF-hands within S100 and S100-like proteins, a new signature profile has been established to allow for the identification of pseudo EF-hand and S100 proteins from genomic information. The new patterns have a positive predictive value of 99% and a sensitivity of 96% for pseudo EF-hands. Furthermore, using the developed patterns, we have identified zero pseudo EF-hand motif and 467 canonical EF-hand Ca(2+) binding motifs with diverse cellular functions in the bacteria genome. The prediction results imply that pseudo EF-hand motifs are phylogenetically younger than canonical EF-hand motifs. Our prediction of Ca(2+) binding motifs provides not only an insight into the role of Ca(2+) and Ca(2+)-binding proteins in bacterial systems, but also a way to explore and define the role of Ca(2+) in other biological systems (calciomics).

Probing the structural basis for the difference in thermostability displayed by family 10 xylanases

Thermostability is an important property of industrially significant hydrolytic enzymes: understanding the structural basis for this attribute will underpin the future biotechnological exploitation of these biocatalysts. The Cellvibrio family 10 (GH10) xylanases display considerable sequence identity but exhibit significant differences in thermostability; thus, these enzymes represent excellent models to examine the structural basis for the variation in stability displayed by these glycoside hydrolases. Here, we have subjected the intracellular Cellvibrio mixtus xylanase CmXyn10B to forced protein evolution. Error-prone PCR and selection identified a double mutant, A334V/G348D, which confers an increase in thermostability. The mutant has a Tm 8 degrees C higher than the wild-type enzyme and, at 55 degrees C, the first-order rate constant for thermal inactivation of A334V/G348D is 4.1 x 10(-4) min(-1), compared to a value of 1.6 x 10(-1) min(-1) for the wild-type enzyme. The introduction of the N to C-terminal disulphide bridge into A334V/G348D, which increases the thermostability of wild-type CmXyn10B, conferred a further approximately 2 degrees C increase in the Tm of the double mutant. The crystal structure of A334V/G348D showed that the introduction of Val334 fills a cavity within the hydrophobic core of the xylanase, increasing the number of van der Waals interactions with the surrounding aromatic residues, while O(delta1) of Asp348 makes an additional hydrogen bond with the amide of Gly344 and O(delta2) interacts with the arabinofuranose side-chain of the xylose moiety at the -2 subsite. To investigate the importance of xylan decorations in productive substrate binding, the activity of wild-type CmXyn10B, the mutant A334V/G348D, and several other GH10 xylanases against xylotriose and xylotriose containing an arabinofuranose side-chain (AX3) was assessed. The enzymes were more active against AX3 than xylotriose, providing evidence that the arabinose side-chain makes a generic contribution to substrate recognition by GH10 xylanases.

Domain coupling in a multimodular cellobiohydrolase CbhA fromClostridium thermocellum

Cellobiohydrolase A (CbhA) from Clostridium thermocellum is composed of an N-terminal carbohydrate-binding domain 4 (CBD4), an immunoglobulin-like domain (Ig), a glycoside hydrolase 9 (GH9), X1(1) and X1(2) domains, a CBD3, and a dockerin domain. All domains, except the Ig, bind Ca2+. The following constructs were made: X1(2), X1(1)X1(2), CBD3, X1(1)X1(2)-CBD3, Ig, GH9, Ig-GH9, Ig-GH9-X1(1)X1(2), and Ig-GH9-X1(1)X1(2)-CBD3. Interactions between domains in (1) buffer, (2) with Ca2+, or (3) ethylenediaminetetraacetic acid (EDTA) were studied by differential scanning calorimetry. Thermal unfoldings of all constructs were irreversible. Calcium increased T(d) and cooperativity of unfolding. Multi-domain constructs exhibited more cooperative unfolding in buffer and in the presence of EDTA than did individual domains. They denatured by mechanism simpler than expected from their modular architecture. The results indicate that domain coupling in thermophilic proteins constitutes a significant stabilizing factor.

The Use of Forced Protein Evolution to Investigate and Improve Stability of Family 10 Xylanases

Metal ions such as calcium often play a key role in protein thermostability. The inclusion of metal ions in industrial processes is, however, problematic. Thus, the evolution of enzymes that display enhanced stability, which is not reliant on divalent metals, is an important biotechnological goal. Here we have used forced protein evolution to interrogate whether the stabilizing effect of calcium in an industrially relevant enzyme can be replaced with amino acid substitutions. Our study has focused on the GH10 xylanase CjXyn10A from Cellvibrio japonicus, which contains an extended calcium binding loop that confers proteinase resistance and thermostability. Three rounds of error-prone PCR and selection identified a treble mutant, D262N/A80T/R347C, which in the absence of calcium is more thermostable than wild type CjXyn10A bound to the divalent metal. D262N influences the properties of the calcium binding site, A80T fills a cavity in the enzyme, increasing the number of hydrogen bonds and van der Waals interactions, and the R347C mutation introduces a disulfide bond that decreases the free energy of the unfolded enzyme. A derivative of CjXyn10A (CfCjXyn10A) in which the calcium binding loop has been replaced with a much shorter loop from Cellulomonas fimi CfXyn10A was also subjected to forced protein evolution to select for thermostablizing mutations. Two amino acid substitutions within the introduced loop and the A80T mutation increased the thermostability of the enzyme. This study demonstrates how forced protein evolution can be used to introduce enhanced stability into industrially relevant enzymes while removing calcium as a major stability determinant.

High-resolution crystal structures of Caldicellulosiruptor strain Rt8B.4 carbohydrate-binding module CBM27-1 and its complex with mannohexaose

Carbohydrate-binding modules (CBMs) are the most common non-catalytic modules associated with enzymes active in plant cell-wall hydrolysis. Despite the large number of putative CBMs being identified by amino acid sequence alignments, only few representatives have been experimentally shown to have a carbohydrate-binding function. Caldicellulosiruptor strain Rt8B.4 Man26 is a thermostable modular glycoside hydrolase beta-mannanase which contains two non-catalytic modules in tandem at its N terminus. These modules were recently shown to function primarily as beta-mannan-binding modules and have accordingly been classified as members of a novel family of CBMs, family 27. The N-terminal CBM27 (CsCBM27-1) of Man26 from Caldicellulosiruptor Rt8B.4 displays high-binding affinity towards mannohexaose with a Ka of 1 x 10(7) M(-1). Accordingly, the high-resolution crystal structures of CsCBM27-1 native and its mannohexaose complex were solved at 1.55 angstroms and 1.06 angstoms resolution, respectively. In the crystal, CsCBM27-1 shows the typical beta-sandwich jellyroll fold observed in other CBMs with a single metal ion bound, which was identified as calcium. The crystal structures reveal that the overall fold of CsCBM27-1 remains virtually unchanged upon sugar binding and that binding is mediated by three solvent-exposed tryptophan residues and few direct hydrogen bonds. Based on binding affinity and thermal unfolding experiments this structural calcium is shown to play a role in the thermal stability of CsCBM27-1 at high temperatures. The higher binding affinity of CsCBM27-1 to mannooligosaccharides when compared to other members of CBM family 27 might be explained by the different orientation of the residues forming the "aromatic platform" and by differences in the length of loops. Finally, evidence is presented, on the basis of fold similarities and the retention of the position of conserved motifs and a calcium ion, for the consolidation of related CBM families into a superfamily of CBMs.

Probing the stability of the modular family 10 xylanase from Rhodothermus marinus

The thermophilic bacterium Rhodothermus marinus produces a modular xylanase (Xyn10A) consisting of two N-terminal carbohydrate-binding modules (CBMs), followed by a domain of unknown function, and a catalytic module flanked by a fifth domain. Both Xyn10A CBMs bind calcium ions, and this study explores the effect of these ions on the stability of the full-length enzyme. Xyn10A and truncated forms thereof were produced and their thermostabilities were evaluated under different calcium loads. Studies performed using differential scanning calorimetry showed that the unfolding temperature of the Xyn10A was significantly dependent on the presence of Ca2+, and that the third domain of the enzyme binds at least one Ca2+. Thermal inactivation studies confirmed the role of tightly bound Ca2+ in stabilizing the enzyme, but showed that the presence of a large excess of this ion results in reduced kinetic stability. The truncated forms of Xyn10A were less stable than the full-length enzyme, indicative of module/domain thermostabilizing interactions. Finally, possible roles of the two domains of unknown function are discussed in the light of this study. This is the first report on the thermostabilizing role of calcium on a modular family 10 xylanase that displays multiple calcium binding in three of its five domains/modules.

Alpha-crystallin and ATP facilitate the in vitro renaturation of xylanase: enhancement of refolding by metal ions

Alpha-crystallin is a multimeric protein that functions as a molecular chaperone and shares extensive structural homology to small heat shock proteins. For the functional in vitro analysis of alpha-crystallin, the xylanase Xyl II from alkalophilic thermophilic Bacillus was used as a model system. The mechanism of chaperone action of alpha-crystallin is less investigated. Here we studied the refolding of Gdn HCl-denatured Xyl II in the presence and absence of alpha-crystallin to elucidate the molecular mechanism of chaperone-mediated in vitro folding. Our results, based on intrinsic tryptophan fluorescence and hydrophobic fluorophore 8-anilino-1-naphthalene sulfonate binding studies, suggest that alpha-crystallin formed a complex with a putative molten globule-like intermediate in the refolding pathway of Xyl II. The alpha-crystallin.Xyl II complex exhibited no functional activity. Addition of ATP to the complex initiated the renaturation of Xyl II with 30%-35% recovery of activity. The nonhydrolyzable analog 5'-adenylyl imidodiphosphate (AMP-PNP) was capable of reconstitution of active Xyl II to a lesser extent than ATP. Although the presence of Ca(2+) was not required for the in vitro refolding of Xyl II, the renaturation yield was enhanced in its presence. Experimental evidence indicated that the binding of ATP to the alpha-crystallin.Xyl II complex brought about conformational changes in alpha-crystallin facilitating the dissociation of xylanase molecules. This is the first report of the enhancement of alpha-crystallin chaperone functions by metal ions.

The membrane-bound alpha-glucuronidase from Pseudomonas cellulosa hydrolyzes 4-O-methyl-D-glucuronoxylooligosaccharides but not 4-O-methyl-D-glucuronoxylan

The microbial degradation of xylan is a key biological process. Hardwood 4-O-methyl-D-glucuronoxylans are extensively decorated with 4-O-methyl-D-glucuronic acid, which is cleaved from the polysaccharides by alpha-glucuronidases. In this report we describe the primary structures of the alpha-glucuronidase from Cellvibrio mixtus (C. mixtus GlcA67A) and the alpha-glucuronidase from Pseudomonas cellulosa (P. cellulosa GlcA67A) and characterize P. cellulosa GlcA67A. The primary structures of C. mixtus GlcA67A and P. cellulosa GlcA67A, which are 76% identical, exhibit similarities with alpha-glucuronidases in glycoside hydrolase family 67. The membrane-associated pseudomonad alpha-glucuronidase released 4-O-methyl-D-glucuronic acid from 4-O-methyl-D-glucuronoxylooligosaccharides but not from 4-O-methyl-D-glucuronoxylan. We propose that the role of the glucuronidase, in combination with cell-associated xylanases, is to hydrolyze decorated xylooligosaccharides, generated by extracellular hemicellulases, to xylose and 4-O-methyl-D-glucuronic acid, enabling the pseudomonad to preferentially utilize the sugars derived from these polymers.

Calcium binding and thermostability of carbohydrate binding module CBM4-2 of Xyn10A from Rhodothermus marinus

Calcium binding to carbohydrate binding module CBM4-2 of xylanase 10A (Xyn10A) from Rhodothermus marinus was explored using calorimetry, NMR, fluorescence, and absorbance spectroscopy. CBM4-2 binds two calcium ions, one with moderate affinity and one with extremely high affinity. The moderate-affinity site has an association constant of (1.3 +/- 0.3) x 10(5) M(-1) and a binding enthalpy DeltaH(a) of -9.3 +/- 0.4 kJ x mol(-1), while the high-affinity site has an association constant of approximately 10(10) M(-1) and a binding enthalpy DeltaH(a) of -40.5 +/- 0.5 kJ x mol(-1). The locations of the binding sites have been identified by NMR and structural homology, and were verified by site-directed mutagenesis. The high-affinity site consists of the side chains of E11 and D160 and backbone carbonyls of E52 and K55, while the moderate-affinity site comprises the side chain of D29 and backbone carbonyls of L21, A22, V25, and W28. The high-affinity site is in a position analogous to the calcium site in CBM4 structures and in a recent CBM22 structure. Binding of calcium increases the unfolding temperature of the protein (T(m)) by approximately 23 degrees C at pH 7.5. No correlation between binding affinity and T(m) change was noted, as each of the two calcium ions contributes almost equally to the increase in unfolding temperature.

The location of the ligand-binding site of carbohydrate-binding modules that have evolved from a common sequence is not conserved

Polysaccharide-degrading enzymes are generally modular proteins that contain non-catalytic carbohydrate-binding modules (CBMs), which potentiate the activity of the catalytic module. CBMs have been grouped into sequence-based families, and three-dimensional structural data are available for half of these families. Clostridium thermocellum xylanase 11A is a modular enzyme that contains a CBM from family 6 (CBM6), for which no structural data are available. We have determined the crystal structure of this module to a resolution of 2.1 A. The protein is a beta-sandwich that contains two potential ligand-binding clefts designated cleft A and B. The CBM interacts primarily with xylan, and NMR spectroscopy coupled with site-directed mutagenesis identified cleft A, containing Trp-92, Tyr-34, and Asn-120, as the ligand-binding site. The overall fold of CBM6 is similar to proteins in CBM families 4 and 22, although surprisingly the ligand-binding site in CBM4 and CBM22 is equivalent to cleft B in CBM6. These structural data define a superfamily of CBMs, comprising CBM4, CBM6, and CBM22, and demonstrate that, although CBMs have evolved from a relatively small number of ancestors, the structural elements involved in ligand recognition have been assembled at different locations on the ancestral scaffold.

Structural basis for catalysis and inhibition of N-glycan processing class I alpha 1,2-mannosidases

Endoplasmic reticulum (ER) class I alpha1,2-mannosidase (also known as ER alpha-mannosidase I) is a critical enzyme in the maturation of N-linked oligosaccharides and ER-associated degradation. Trimming of a single mannose residue acts as a signal to target misfolded glycoproteins for degradation by the proteasome. Crystal structures of the catalytic domain of human ER class I alpha1,2-mannosidase have been determined both in the presence and absence of the potent inhibitors kifunensine and 1-deoxymannojirimycin. Both inhibitors bind to the protein at the bottom of the active-site cavity, with the essential calcium ion coordinating the O-2' and O-3' hydroxyls and stabilizing the six-membered rings of both inhibitors in a (1)C(4) conformation. This is the first direct evidence of the role of the calcium ion. The lack of major conformational changes upon inhibitor binding and structural comparisons with the yeast alpha1, 2-mannosidase enzyme-product complex suggest that this class of inverting enzymes has a novel catalytic mechanism. The structures also provide insight into the specificity of this class of enzymes and provide a blueprint for the future design of novel inhibitors that prevent degradation of misfolded proteins in genetic diseases.

A novel Cellvibrio mixtus family 10 xylanase that is both intracellular and expressed under non-inducing conditions

Hydrolysis of the plant cell wall polysaccharides cellulose and xylan requires the synergistic interaction of a repertoire of extracellular enzymes. Recently, evidence has emerged that anaerobic bacteria can synthesize high levels of periplasmic xylanases which may be involved in the hydrolysis of small xylo-oligosaccharides absorbed by the micro-organism. Cellvibrio mixtus, a saprophytic aerobic soil bacterium that is highly active against plant cell wall polysaccharides, was shown to express internal xylanase activity when cultured on media containing xylan or glucose as sole carbon source. A genomic library of C. mixtus DNA, constructed in lambdaZAPII, was screened for xylanase activity. The nucleotide sequence of the genomic insert from a xylanase-positive clone that expressed intracellular xylanase activity in Escherichia coli revealed an ORF of 1137 bp (xynC), encoding a polypeptide with a deduced M(r) of 43413, defined as xylanase C (XylC). Probing a gene library of Pseudomonas fluorescens subsp. cellulosa with C. mixtus xynC identified a xynC homologue (designated xynG) encoding XylG; XylG and xynG were 67% and 63% identical to the corresponding C. mixtus sequences, respectively. Both XylC and XylG exhibit extensive sequence identity with family 10 xylanases, particularly with non-modular enzymes, and gene deletion studies on xynC supported the suggestion that they are single-domain xylanases. Purified recombinant XylC had an M(r) of 41000, and displayed biochemical properties typical of family 10 polysaccharidases. However, unlike previously characterized xylanases, XylC was particularly sensitive to proteolytic inactivation by pancreatic proteinases and was thermolabile. C. mixtus was grown to late-exponential phase in the presence of glucose or xylan and the cytoplasmic, periplasmic and cell envelope fractions were probed with anti-XylC antibodies. The results showed that XylC was absent from the culture media but was predominantly present in the periplasm of C. mixtus cells grown on glucose, xylan, CM-cellulose or Avicel. These data suggest that C. mixtus can express non-modular internal xylanases whose potential roles in the hydrolysis of plant cell wall components are discussed.

The metal dependence of Bacillus subtilis phytase

The metal ion requirement of a Bacillus subtilis phytase has been studied. Removal of metal ions from the enzyme by EDTA resulted in complete inactivation. Circular dichroism spectroscopy was used to study the effect of metal ion removal on the protein conformation. The loss of enzymatic activity is most likely due to a conformational change, as the circular dichroism spectra of holoenzyme and metal-depleted enzyme were different. Metal-depleted enzyme was partially able to restore the active conformation when incubated in the presence of calcium. Only minor reactivation was detected with other divalent metal ions and their combinations. Based on the data we conclude that B. subtilis phytase requires calcium for active conformation. Calcium has also a strong stabilizing effect on the enzyme against thermal denaturation. However, the conformational change resulted by calcium depletion does not affect the protease susceptibility.

Sequence, overproduction and purification of the family 11 endo-beta-1,4-xylanase encoded by the xyl1 gene of Streptomyces sp. S38

The xyl1 gene encoding the Xyl1 xylanase of Streptomyces sp. strain S38 was cloned by screening an enriched DNA library with a specific DNA probe and sequenced. Three short 5 bp -CGAAA- sequences are located upstream of the Streptomyces sp. S38 xyl1 gene 105, 115 and 250 bp before the start codon. These sequences, named boxes 1, 2 and 3, are conserved upstream of the Actinomycetales xylanase genes and are specifically recognized by a DNA-binding protein (Giannotta et al., 1994. FEMS Microbiol. Lett. 142, 91-97) and could be probably involved in the regulation of xylanase production. The Xyl1 ORF encodes a 228 residue polypeptide and the Xyl1 preprotein contains a 38 residue signal peptide whose cleavage yields a 190 residue mature protein of calculated M(r) = 20,585 and basic pI value of 9.12. The molecular mass of the produced and purified mature protein determined by mass spectrometry (20,586 +/- 1 Da) and its pI (9.8) agree with these calculated values. Its N-terminal amino-acid sequence confirmed the proposed cleavage site between the signal peptide and the mature protein. Comparisons between Xyl1 and the 62 other xylanases belonging to family 11 allowed the construction of a phylogenetic tree and revealed its close relationship with Actinomycetales enzymes. Moreover, nine residues were found to be strictly conserved among the 63 xylanases.

A family IIb xylan-binding domain has a similar secondary structure to a homologous family IIa cellulose-binding domain but different ligand specificity

BACKGROUND

Many enzymes that digest polysaccharides contain separate polysaccharide-binding domains. Structures have been previously determined for a number of cellulose-binding domains (CBDs) from cellulases.

RESULTS

The family IIb xylan-binding domain 1 (XBD1) from Cellulomonas fimi xylanase D is shown to bind xylan but not cellulose. Its structure is similar to that of the homologous family IIa CBD from C. fimi Cex, consisting of two four-stranded beta sheets that form a twisted 'beta sandwich'. The xylan-binding site is a groove made from two tryptophan residues that stack against the faces of the sugar rings, plus several hydrogen-bonding polar residues.

CONCLUSIONS

The biggest difference between the family IIa and IIb domains is that in the former the solvent-exposed tryptophan sidechains are coplanar, whereas in the latter they are perpendicular, forming a twisted binding site. The binding sites are therefore complementary to the secondary structures of the ligands cellulose and xylan. XBD1 and CexCBD represent a striking example of two proteins that have high sequence similarity but a different function.

Molecular and biotechnological aspects of xylanases

Hemicellulolytic microorganisms play a significant role in nature by recycling hemicellulose, one of the main components of plant polysaccharides. Xylanases (EC 3.2.1.8) catalyze the hydrolysis of xylan, the major constituent of hemicellulose. The use of these enzymes could greatly improve the overall economics of processing lignocellulosic materials for the generation of liquid fuels and chemicals. Recently cellulase-free xylanases have received great attention in the development of environmentally friendly technologies in the paper and pulp industry. In microorganisms that produce xylanases low molecular mass fragments of xylan and their positional isomers play a key role in regulating its biosynthesis. Xylanase and cellulase production appear to be regulated separately, although the pleiotropy of mutations, which causes the elimination of both genes, suggests some linkage in the synthesis of the two enzymes. Xylanases are found in a cornucopia of organisms and the genes encoding them have been cloned in homologous and heterologous hosts with the objectives of overproducing the enzyme and altering its properties to suit commercial applications. Sequence analyses of xylanases have revealed distinct catalytic and cellulose binding domains, with a separate non-catalytic domain that has been reported to confer enhanced thermostability in some xylanases. Analyses of three-dimensional structures and the properties of mutants have revealed the involvement of specific tyrosine and tryptophan residues in the substrate binding site and of glutamate and aspartate residues in the catalytic mechanism. Many lines of evidence suggest that xylanases operate via a double displacement mechanism in which the anomeric configuration is retained, although some of the enzymes catalyze single displacement reactions with inversion of configuration. Based on a dendrogram obtained from amino acid sequence similarities the evolutionary relationship between xylanases is assessed. In addition the properties of xylanases from extremophilic organisms have been evaluated in terms of biotechnological applications.

Purification and properties of a xylan-binding endoxylanase from Alkaliphilic bacillus sp. strain K-1

An alkaliphilic bacterium, Bacillus sp. strain K-1, produces extracellular xylanolytic enzymes such as xylanases, beta-xylosidase, arabinofuranosidase, and acetyl esterase when grown in xylan medium. One of the extracellular xylanases that is stable in an alkaline state was purified to homogeneity by affinity adsorption-desorption on insoluble xylan. The enzyme bound to insoluble xylan but not to crystalline cellulose. The molecular mass of the purified xylan-binding xylanase was estimated to be approximately 23 kDa. The enzyme was stable at alkaline pHs up to 12. The optimum temperature and optimum pH of the enzyme activity were 60 degrees C and 5.5, respectively. Metal ions such as Fe2+, Ca2+, and Mg2+ greatly increased the xylanase activity, whereas Mn2+ strongly inhibited it. We also demonstrated that the enzyme could hydrolyze the raw lignocellulosic substances effectively. The enzymatic products of xylan hydrolysis were a series of short-chain xylooligosaccharides, indicating that the enzyme was an endoxylanase.

Calcium binding to the class I alpha-1,2-mannosidase from Saccharomyces cerevisiae occurs outside the EF hand motif

Class I alpha-1,2-mannosidases are a family of Ca2+-dependent enzymes that have been conserved through eukaryotic evolution. These enzymes contain a conserved putative EF hand Ca2+-binding motif and nine invariant acidic residues. The catalytic domain of the alpha-1, 2-mannosidase from Saccharomyces cerevisiae was expressed in Pichia pastoris and was shown by atomic absorption and equilibrium dialysis to bind one Ca2+ ion with high affinity (KD = 4 x 10(-)7 M). Ca2+ protected the enzyme from thermal denaturation. Mutation of the 1st and 12th residues of the putative EF hand Ca2+ binding loop (D121N, D121A, E132Q, E132V, and D121A/E132V) had no effect on Ca2+ binding, demonstrating that the EF hand motif is not the site of Ca2+ binding. In contrast, three invariant acidic residue mutants (D275N, E279Q, and E438Q) lost the ability to bind 45Ca2+ following nondenaturing polyacrylamide gel electrophoresis whereas D86N, E132Q, E503Q, and E526Q mutants exhibited binding of 45Ca2+ similar to the wild-type enzyme. The wild-type enzyme had a Km and kcat of 0.5 mM and 12 s-1, respectively. The Km of E526Q was greatly increased to 4 mM with a small reduction in kcat to 5 s-1 whereas the kcat values of D86N and E132Q(V) were greatly reduced (0.005-0.007 s-1) with a decrease in Km (0.07-0.3 mM). The E503Q mutant is completely inactive. Asp275, Glu279, and Glu438 are therefore required for Ca2+ binding whereas Asp86, Glu132, and Glu503 are required for catalysis.

The topology of the substrate binding clefts of glycosyl hydrolase family 10 xylanases are not conserved

The crystal structures of family 10 xylanases indicate that the distal regions of their active sites are quite different, suggesting that the topology of the substrate binding clefts of these enzymes may vary. To test this hypothesis, we have investigated the rate and pattern of xylooligosaccharide cleavage by the family 10 enzymes, Pseudomonas fluorescens subsp. cellulosa xylanase A (XYLA) and Cellulomonas fimi exoglucanase, Cex. The data showed that Cex contained three glycone and two aglycone binding sites, while XYLA had three glycone and four aglycone binding sites, supporting the view that the topologies of substrate binding clefts in family 10 glycanases are not highly conserved. The importance of residues in the substrate binding cleft of XYLA in catalysis and ligand binding were evaluated using site-directed mutagenesis. In addition to providing insight into the function of residues in the glycone region of the active site, the data showed that the aromatic residues Phe-181, Tyr-255, and Tyr-220 play important roles in binding xylose moieties, via hydrophobic interactions, at subsites +1, +3, and +4, respectively. Interestingly, the F181A mutation caused a much larger reduction in the activity of the enzyme against xylooligosaccharides compared with xylan. These data, in conjunction with a previous study (Charnock, S. J., Lakey, J. H., Virden, R., Hughes, N., Sinnott, M. L., Hazlewood, G. P., Pickersgill, R., and Gilbert, H. J. (1997) J. Biol. Chem. 272, 2942-2951), suggest that the binding of xylooligosaccharides at the -2 and +1 subsites ensures that the substrates occupy the -1 and +1 subsites and thus preferentially form productive complexes with the enzyme. Loss of ligand binding at either subsite results in small substrates forming nonproductive complexes with XYLA by binding to distal regions of the substrate binding cleft.

Change in conformation of plasma membrane phospholipid scramblase induced by occupancy of its Ca2+ binding site

Phospholipid (PL) scramblase is a 35.1 kDa plasma membrane protein that mediates the accelerated transbilayer migration of plasma membrane PL in activated, injured, or apoptotic cells exposed to elevated intracellular Ca2+. We recently identified a conserved segment in the PL scramblase polypeptide (residues Asp273 to Asp284) that is essential for its PL-mobilizing function and was presumed to contain the Ca2+ binding site of the protein (Zhou, Q., Sims, P. J., and Wiedmer, T. (1998) Biochemistry 37, 2356-2360). Whereas the sequence of this peptide segment resembles that of known Ca2+-binding loops within EF-hand containing proteins, it is unusual in being a single such loop in the entire protein and in being closely spaced to the predicted transmembrane helix (Ala291-Gly309). To gain insight into how Ca2+ activates the PL-mobilizing function of PL scramblase, we analyzed conformational changes associated with occupancy of this putative Ca2+ binding site. In addition to activation by Ca2+, the PL-mobilizing function of PL scramblase was found to be activated by other ions, with apparent affinities Tb3+, La3+ >> Ca2+ > Mn2+ > Zn2+ > Sr2+ >> Ba2+, Mg2+. Evidence for coordinate binding of metal ion by the polypeptide was provided by resonance energy transfer from protein Trp to Tb3+, which was competed by excess Ca2+. Metal binding to PL scramblase was accompanied by increased right-angle light scattering and by a prominent change in circular dichroism, suggesting that coordinate binding of the metal ion induces a conformational change that includes self-aggregation of the polypeptide. Consistent with this interpretation, addition of Ca2+ was found to protect PL scramblase from proteolysis by trypsin both in detergent solution as well as in situ, within the erythrocyte membrane. Mutation in the segment Asp273-Asp284 reduced Tb3+ incorporation and attenuated the change in CD spectrum induced by bound metal ligand, confirming that this suspected EF-hand loopike segment of the polypeptide directly contributes to the Ca2+ binding site.

Structure and function analysis of Pseudomonas plant cell wall hydrolases

Hydrolysis of the major structural polysaccharides of plant cell walls by the aerobic soil bacterium Pseudomonas fluorescens subsp. cellulosa is attributable to the production of multiple extracellular cellulase and hemicellulase enzymes, which are the products of distinct genes belonging to multigene families. Cloning and sequencing of individual genes, coupled with gene sectioning and functional analysis of the encoded proteins have provided a detailed picture of structure/function relationships and have established the cellulase-hemicellulase system of P. fluorescens subsp. cellulosa as a model for the plant cell wall degrading enzyme systems of aerobic cellulolytic bacteria. Cellulose- and xylan-degrading enzymes produced by the pseudomonad are typically modular in structure and contain catalytic and noncatalytic domains joined together by serine-rich linker sequences. The cellulases include a cellodextrinase; a beta-glucan glucohydrolase and multiple endoglucanases, containing catalytic domains belonging to glycosyl hydrolase families 5, 9, and 45; and cellulose-binding domains of families II and X, both of which are present in each enzyme. Endo-acting xylanases, with catalytic domains belonging to families 10 and 11, and accessory xylan-degrading enzymes produced by P. fluorescens subsp. cellulosa contain cellulose-binding domains of families II, X, and XI, which act by promoting close contact between the catalytic domain of the enzyme and its target substrate. A domain homologous with NodB from rhizobia, present in one xylanase, functions as a deacetylase. Mananase, arabinanase, and galactanase produced by the pseudomonad are single domain enzymes. Crystallographic studies, coupled with detailed kinetic analysis of mutant forms of the enzyme in which key residues have been altered by site-directed mutagenesis, have shown that xylanase A (family 10) has 8-fold alpha/beta barrel architecture, an extended substrate-binding cleft containing at least six xylose-binding pockets and a calcium-binding site that protects the enzyme from thermal inactivation, thermal unfolding, and attack by proteinases. Kinetic studies of mutant and wild-type forms of a mannanase and a galactanase from P. fluorescens subsp. cellulosa have enabled the catalytic mechanisms and key catalytic residues of these enzymes to be identified.