Removal of Congo Red dye from aqueous solution using Amberlite IRA-400 in batch and fixed bed reactors

Deciphering the mechanistic role of Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52) in bio-sorption and phyto-assimilation of Cadmium via Linum usitatissimum L. Seedlings

Three Cd2+ resistant bacterium's minimal inhibition concentrations were assessed and their percentages of Cd2+ accumulation were determined by measurements using an atomic absorption spectrophotometer (AAS). The results revealed that two isolates Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52), identified by 16S rDNA gene sequencing, showed a higher percentage of Cd2+ accumulation i.e., 83.78% and 81.79%, respectively. Moreover, both novel strains can tolerate Cd2+ levels up to 2000 mg/L isolated from district Chakwal. Amplification of the czcD, nifH, and acdS genes was also performed. Batch bio-sorption studies revealed that at pH 7.0, 1 g/L of biomass, and an initial 150 mg/L Cd2+ concentration were the ideal bio-sorption conditions for Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52). The experimental data were fit to Langmuir isotherm measurements and Freundlich isotherm model R2 values of 0.999 for each of these strains. Bio sorption processes showed pseudo-second-order kinetics. The intra-diffusion model showed Xi values for Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52) of 2.26 and 2.23, respectively. Different surface ligands, was investigated through Fourier-transformation infrared spectroscopy (FTIR). The scanning electron microscope SEM images revealed that after Cd2+ adsorption, the cells of both strains became thick, adherent, and deformed. Additionally, both enhanced Linum usitatissimum plant seed germination under varied concentrations of Cd2+ (0 mg/L, 250 mg/L,350 mg/L, and 500 mg/L). Current findings suggest that the selected strains can be used as a sustainable part of bioremediation techniques.

Amphiphilic polyphenol incorporated hydrogel derived from mucoadhesive of Dillenia indica: Potential antioxidant and adsorbent

In this work, the mucoadhesive substances from the fruits and seeds of Dillenia indica (DI), a plant present abundantly in India, have been extracted and utilised to prepare a hydrogel. A synthetically prepared amphiphilic polyphenol (L) has been incorporated within the hydrogel network to enhance the hydrogelation property. Moreover, the DI-L hydrogel's total phenolic content and radical scavenging prospects have been investigated. The DI-L hydrogel has shown good, sensitive, and efficient adsorptive removal of Fe(III) from the aqueous medium with an adsorption capacity of 6.157 mg/g for an initial concentration of 10 mg/L of Fe(III) solution. As a result, these findings elucidate the most innovative application of transforming fruit mucoadhesive into sustainable environmental solutions.

Microbial Biofilms for Environmental Bioremediation of Heavy Metals: a Review

Heavy metal pollution caused due to various industrial and mining activities poses a serious threat to all forms of life in the environment because of the persistence and toxicity of metal ions. Microbial-mediated bioremediation including microbial biofilms has received significant attention as a sustainable tool for heavy metal removal as it is considered safe, effective, and feasible. The biofilm matrix is dynamic, having microbial cells as major components with constantly changing and evolving microenvironments. This review summarizes the bioremediation potential of bacterial biofilms for different metal ions. The composition and mechanism of biofilm formation along with interspecies communication among biofilm-forming bacteria have been discussed. The interaction of biofilm-associated microbes with heavy metals takes place through a variety of mechanisms. These include biosorption and bioaccumulation in which the microbes interact with the metal ions leading to their conversion from a highly toxic form to a less toxic form. Such interactions are facilitated via the negative charge of the extracellular polymeric substances on the surface of the biofilm with the positive charge of the metal ions and the high cell densities and high concentrations of cell-cell signaling molecules within the biofilm matrix. Furthermore, the impact of the anodic and cathodic redox potentials in a bioelectrochemical system (BES) for the reduction, removal, and recovery of numerous heavy metal species provides an interesting insight into the bacterial biofilm-mediated bioelectroremediation process. The review concludes that biofilm-linked bioremediation is a viable option for the mitigation of heavy metal pollution in water and ecosystem recovery.

Removal of Methylene Blue and Congo Red Using a Chitosan-Graphene Oxide-Electrosprayed Functionalized Polymeric Nanofiber Membrane

Untreated textile effluent may contain toxic organic pollutants that can have negative impacts on the ecosystem. Among the harmful chemicals present in dyeing wastewater, there are two frequently used organic dyes: methylene blue (cationic) and congo red (anionic). The current study presents investigations on a novel two-tier nanocomposite membrane, i.e., a top layer formed of electrosprayed chitosan-graphene oxide and a bottom layer consisting of an ethylene diamine functionalized polyacrylonitrile electrospun nanofiber for the simultaneous removal of the congo red and methylene blue dyes. The fabricated nanocomposite was characterized using FT-IR spectroscopy, scanning electron microscopy, UV-visible spectroscopy, and Drop Shape Analyzer. Isotherm modeling was used to determine the efficiency of dye adsorption for the electrosprayed nanocomposite membrane and the confirmed maximum adsorptive capacities of 182.5 mg/g for congo red and 219.3 mg/g for methylene blue, which fits with the Langmuir isotherm model, suggesting uniform single-layer adsorption. It was also discovered that the adsorbent preferred an acidic pH level for the removal of congo red and a basic pH level for the removal of methylene blue. The gained results can be a first step for the development of new wastewater cleaning techniques.

Synthesis of activated carbon composited with Egyptian black sand for enhanced adsorption performance toward methylene blue dye

The present study reports the feasibility of the synthesis of a novel porous composite adsorbent, prepared from olive stone activated carbon (OS400) and garnet (GA) mineral impregnations (referred to as OSMG). This composite (OSMG) was applied for its ability to adsorb a macromolecular organic dye. The composite's structural characteristics were evaluated using various techniques such as Brunauer-Emmett-Teller (BET), Scanning Electron Microscopy equipped with Energy Dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD), and a Fourier transform infrared spectrometer (FT-IR). The specific surface area of the garnet (GA), (OS400), and (OSMG) were found to be 5.157 mg⋅g^-1, 1489.598 mg⋅g^-1, and 546.392 mg⋅g^-1, respectively. The specific surface area of the new composite (OSMG) was promoted to enhance the adsorption of methylene blue (MB). Experiments were conducted under various conditions, including contact time, initial dye concentration, adsorbent dosage, pH, and temperatures. Data from these experiments were analyzed using several adsorption models including Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich (D-R). The results indicated that, the adsorption fit best with the Freundlich model and that the adsorption process followed a pseudo-second-order kinetic mechanism. Additionally, the thermodynamic analysis indicated the adsorption of MB onto garnet(GA) adsorbents is endothermic, while the sorption onto (OS400) and (OSMG) is an exothermic and non-spontaneous process. The OSMG composite can be used for at least five cycles without significant loss of adsorptive performance, and can easily be separated from the water after treatment.

Chitosan-Graphene Oxide Dip-Coated Polyacrylonitrile-Ethylenediamine Electrospun Nanofiber Membrane for Removal of the Dye Stuffs Methylene Blue and Congo Red

Textile wastewater accommodates many toxic organic contaminants that could potentially threaten the ecosystem if left untreated. Methylene blue is a toxic, non-biodegradable, cationic dye that is reportedly observed in significant amounts in the textile effluent stream as it is widely used to dye silk and cotton fabrics. Congo red is a carcinogenic anionic dye commonly used in the textile industry. This study reports an investigation of methylene blue and Congo red removal using a chitosan-graphene oxide dip-coated electrospun nanofiber membrane. The fabricated nanocomposite was characterized using Scanning Electron Microscopy (SEM), FT-IR Spectroscopy, Raman Spectroscopy, UV-vis Spectroscopy, Drop Shape Analyzer, and X-ray Diffraction. The isotherm modeling confirmed a maximum adsorptive capacity of 201 mg/g for methylene blue and 152 mg/g for Congo red, which were well fitted with a Langmuir isotherm model indicating homogenous monolayer adsorption.

A systematic study of cellulose-reactive anionic dye removal using a sustainable bioadsorbent

Cellulose-reactive anionic dyes are one of the dominant colorants used in textile finishing. Unfortunately, they also produce large quantities of wastewater that must be treated before discharge, demanding low-cost and sustainable adsorbents that can easily be implemented, especially for developing countries with thriving cotton-based textile sectors. In this study, a high specific surface area (670 m²/g) water hyacinth root powder (WHRP) bioadsorbent that is neither carbonized nor activated was prepared to remove cellulose-reactive anionic blue dye from an aqueous solution. The effect of adsorption pH (pH = 2-8), adsorbent dose (1 g/L-6 g/L), dye concentration (50 mg/L-500 mg/L), adsorbent particle size (50 μm-1000 μm), mixing speed (100 rpm -200 rpm), and adsorption temperatures (22 °C-60 °C) were systematically studied. It was found that the protonation of lignin polyphenols in WHRP at pH = 2 was responsible for the observed high (∼99%) adsorptive removal of reactive blue dye. The maximum equilibrium adsorption capacity was 128.8 mg/g when 1 g/L WHRP and 500 mg/L dye concentration were used. In addition, adsorption isotherms, kinetic models, and adsorption thermodynamics were investigated. Increasing adsorbent dose, decreasing adsorbent particle size, increasing mixing speed, and lowering temperature favored the adsorption of reactive dye to WHRP adsorbent. The batch adsorption data were best fitted with both Langmuir and Temkin models, especially at 22 °C, while the adsorption kinetic behavior was described best using pseudo-second-order kinetics. Adsorption of cellulose-reactive blue dye to WHRP was spontaneous as characterized by the negative Gibbs energy (-11 kJ/mol to -24 kJ/mol) and exothermic with negative enthalpy (-13 kJ/mol to -23 kJ/mol). The overall adsorption process was controlled by more than one mechanism since the intraparticle diffusion was not the only rate-limiting step under our experimental conditions. Taken together, the abundantly available and sustainable WHRP is an efficient adsorbent that could be scaled up for treating cellulose-reactive dye-contaminated water.

Adsorption-enhanced photocatalytic property of Ag-doped biochar/g-C3N4/TiO2 composite by incorporating cotton-based biochar

In this study, the biochar obtained from waste cotton fibers was introduced into the Ag-doped g-C3N4/TiO2 hybrid composite through a facile one-step hydrothermal process. The morphology, elemental composition, crystal structure, microstructure, specific surface area, chemical bonding state, energy band structure, and separation efficiency of photoinduced charge carriers of the resultant composite were examined using scanning electron microscope, energy dispersive X-ray spectrometer, X-ray diffractometer, transmission electron microscope, surface area analyzer, X-ray photoelectron spectroscope, Ultraviolet-visible spectrophotometer, ultraviolet photoelectron spectroscope, and photoluminescence spectroscope. The adsorption isotherms, kinetics and thermodynamics of the biochar, Ag-doped g-C3N4/TiO2 and Ag-doped biochar/g-C3N4/TiO2 were evaluated using the model methyl orange dye. The photoacatalytic degradation of the model pollutants including methyl orange, methylene blue, congo red, and tetracycline hydrochloride and the photocatalytic reduction of Cr(VI) ions were also assessed under visible light. Experimental results indicated that the photocatalytic property of the Ag-doped biochar/g-C3N4/TiO2 was significantly enhanced through the adsorption enhancement compared with the Ag-doped g-C3N4/TiO2. This was due to the uniform doping of multi-scale porous biochar with g-C3N4 nanosheet, Ag and TiO2 nanoparticles. The adsorptive enhancement induced by the biochar resulted in the narrowed band gap, suitable electronic energy band structure, and fast separation of photoinduced charge carriers of the Ag-doped biochar/g-C3N4/TiO2, which was probably due to the coexistence of multi-valence Ti+4/+3 and Ag0/+1 species and oxygen-containing groups of biochar. The major reactive species of the Ag-doped biochar/g-C3N4/TiO2 were 1O2 and h+. The MO dye adsorption onto the Ag-doped biochar/g-C3N4/TiO2 followed the Langmuir isotherm model, pseudo-first-order and pseudo-second-order kinetic models, and the adsorption process was an endothermic reaction with entropy reduction effects. As such, the Ag-doped biochar/g-C3N4/TiO2 exhibited a promising application for the treatment of wastewater containing multi-pollutants especially organic dyes and heavy metal ions.

Macro-Reticular Ion Exchange Resins for Recovery of Direct Dyes from Spent Dyeing and Soaping Liquors

Dyes are a major class of organic pollutants that are well-known for their harmful impact on aquatic life and humans. Several new strategies for removing colours from industrial and residential effluents have recently emerged, with adsorption being the best option. The current study looked at the recovery of direct dyes from aqueous streams for reuse using macro-reticular ion exchange resins (IERs). The investigation includes dyeing single jersey cotton grey textiles with direct dyes from the Isma dye Company in Kafr El Dawar, Egypt. After centrifuging and separating the supernatant liquid, solutions from thirteen different dyes, produced at an average concentration between the wasted and soaping liquor concentrations, were calculated spectrophotometrically from the first dyeing trials. Kinetic data were well fitted with pseudo-second-order rate kinetics. The amounts of dye retained by the anion exchangers increased with a rise in temperature in the case of Strong Base Resin (SBR) and vice versa for Weak Base Resin (WBR). Batch adsorption experiments with SBR and WBR were conducted for each dye, and both Freundlich and Langmuir isotherms were constructed. It was found that adsorption obeyed both isotherms, that monolayer adsorption took place, and that the dye molecular weight, structure, and solubility, as well as the type of anionic resin used, had varying effects on the extent of absorption. The monolayer sorption capacities Q₀ determined from the Langmuir isotherm model for the strongly and weakly basic anion exchangers were found to be 537.6 and 692 mg/g for Direct Yellow RL, respectively. As a result, Yellow RL exhibited the greatest adsorption on both SBR and WBR. Orange GRLL, Blue 3B, and Congo Red, on the other hand, were the poorest colours absorbed by the IERs, whereas Blue RL demonstrated good adsorption by SBR and accelerated adsorption by WBR. Most of the dyes may be recovered and reused in this manner.

Application of Amberlite IRA 402 Resin Adsorption and Laccase Treatment for Acid Blue 113 Removal from Aqueous Media

Despite Acid Blue 113 (AB 113)'s extensive use and negative environmental impact, very few studies have focused on its efficient and environmentally friendly removal. This research aims the removal of AB 113 from environmental aqueous media and its consequent enzymatic biodegradation. A strongly basic anion exchange resin in Cl^- form, Amberlite IRA 402 (IRA 402(Cl^-)) was used for AB 113 adsorption and a laccase was used to further biodegrade it. For the first time, two novel, efficient and environmentally friendly physical-chemical and biological assays for AB 113 wastewater removal and subsequent biodegradation were combined. The adsorption of AB 113 onto IRA 402(Cl^-) was tested in batch and continuous flux modes. Influence of contact time, concentration and desorption in acidic media were evaluated. The kinetic data were best modulated by the Lagergren model with R² = 0.9275. The Langmuir isotherm model best fitted the experimental data, and the maximum adsorption capacity was 130 mg/g. Dye, resin and AB113 loaded resin were characterized by thermogravimetry and FTIR to evaluate their physical chemical properties modification. Based on the performed studies, a consecutive methodology is proposed, incorporating the ion exchange process in the first stage and the biodegradation process in the second. Thus, in the second stage the residual concentration of AB 113 is reduced by an efficient bio-degradation process produced by the laccase at pH = 4.

An experimental approach for the utilization of tannery sludge-derived Bacillus strain for biosorptive removal of Cr(VI)-contaminated wastewater

Biosorption efficacy of Bacillus strain DPAML065, isolated from the tannery sludge, was appraised for the removal of toxic hexavalent chromium (VI) ions from synthetic wastewater. Effects of the process variable on biosorbent surface by variation in pH, metal Cr(VI) concentration and retention time were examined using batch experiments. The isolated Bacillus strain biosorbent was studied for its morphology and surface chemistry through FE-SEM, EDX and FTIR. It discloses that, the reduction mechanism of Cr(VI) during the process is mainly attributed to precipitation in addition to the functional groups (such as -COOH, -OH, C-O, P=O) present on the cellular matrix of Bacillus. Biochemical tests and 16s rRNA sequencing were also performed to identify the biosorbent at the genus level. A 95% Cr(VI) removal efficiency was procured by Bacillus strain DPAML065 biosorbent at pH 6, incubation period 24 h, 80 mg/L initial feed concentration and operational temperature 35 °C. Equilibrium behaviour of chromium binding follows the Langmuir isotherm model (R² = 0.968) with an adsorption capacity of 106.38 mg/g. Kinetic modelling disseminates that biosorption of Cr(VI) ions by Bacillus strain DPAML065 obeyed pseudo-second-order model (R² = 0.984) rather than the pseudo-first-order model. Concisely, the results indicate that the Bacillus strain DPAML065 is a potential, economically feasible and eco-friendly biosorbent which can be effectively used for removal of chromium (VI) from wastewater.

Green synthesis of iron-based nanoparticles using Chlorophytum comosum leaf extract: methyl orange dye degradation and antimicrobial properties

Nowadays, green synthesis methods have gained growing attention in nanotechnology owning to their versatile features including high efficiency, cost-effectiveness, and eco-friendliness. Here, the aqueous extract of Chlorophytum comosum leaf was applied for the preparation of iron nanoparticles (INPs) to obtain spherical and amorphous INPs with a particle size below 100 nm as confirmed by TEM. The synthesized INPs managed to eliminate methyl orange (MO) from the aqueous solution. The concentration of MO can be easily checked via ultraviolet-visible (UV-Vis) spectroscopy throughout the usage of INPs at the presence of H2O2. The synthesized INPs exhibited MO degradation efficiency of 77% after 6 h. Furthermore, the synthesized INPs exhibited antibacterial activity against both Gram-negative and Gram-positive bacteria. The prepared INPs have an impressive effect on Staphylococcus aureus at concentrations below 6 μg/ml. Overall, the synthesized INPs could considerably contribute to our combat against organic dyes and bacteria.

Two plant growth promoting bacterial Bacillus strains possess different mechanisms in adsorption and resistance to cadmium

Microorganisms are promising biosorbents for decontaminating cadmium-polluted soil or water systems, but the underlying remediation mechanisms are still unclear. In this study, the cadmium biosorption mechanisms and capabilities of plant growth-promoting microorganisms (Bacillus megaterium NCT-2 and Bacillus paranthracis NT1) were investigated. Batch biosorption experiments showed that the optimal biosorption conditions for B. megaterium NCT-2 and B. paranthracis NT1 were pH 6.0, a biomass dosage of 1.0 g L^-1, and an initial Cd²⁺ concentration of 10 mg L^-1, and pH 8.0, a biomass dosage of 1.0 g L^-1, and an initial Cd²⁺ concentration of 10 mg L^-1, respectively. The biosorption processes of both biosorbents were well described by the pseudo-second order kinetic model, which indicated that the biosorption of Cd²⁺ was mainly chemisorption. The intracellular accumulation portion of adsorbed Cd²⁺ in B. megaterium NCT-2 was much higher than in B. paranthracis NT1 (43.11% and 3.25%, respectively), which resulted in the lower cadmium tolerance (14 mg L^-1 and 280 mg L^-1, respectively) and higher cadmium removal efficiency (46.79% and 20.45%, respectively) of B. megaterium NCT-2 compared to B. paranthracis NT1. SEM-EDS and FTIR analysis suggested the probable interactions of Cd²⁺ with the biosorbent surface ligands, such as -OH, -NH, -SO₃, CO and -COOH during surface adsorption. Results of qRT-PCR illustrated that the difference in cadmium resistant mechanism and adsorption performance between B. megaterium NCT-2 and B. paranthracis NT1 may be regulated by the genes cadA, zitB, khtT, and bshA and cadA, trkA, czcD, and bshA, respectively. Our results revealed that these two biosorbents have the potential for further use in the development of cadmium remediation technologies and could provide insight into the mechanisms of cadmium biosorption.

Brilliant Green Dye Biosorption Using Activated Carbon Derived from Guava Tree Wood

The removal of brilliant green (BG) dye from an aqueous solution using activated carbon (AC) derived from guava tree wood is conducted in batch conditions. The influence of different factors such as contact time, pH, adsorbent dosage, initial dye concentration, and temperature on the adsorption of BG onto AC was investigated. FTIR, BET, and SEM analyses were performed to determine the characteristics of the material. The isotherm results were analyzed using the Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherms. Linear regression was used to fit the experimental data. It was found that the equilibrium data are best represented by the Freundlich isotherm, and the adsorption capacity (qe) was 90 mg dye/g AC. The values of the free energy (∆G), enthalpy (∆H), and entropy (∆S) were −86.188 kJ/mol, 43.025 kJ/mol, and 128 J/mol.K, respectively, at pH 7 for the BG dye. The kinetics of BG dye adsorption were analyzed using pseudo-first-order and pseudo-second-order models, and it was found that the pseudo-second-order model was suitable for the behavior of the BG dye at R2 = 0.999.

Synthesis of a novel polysuccinimide based resin for the ultrahigh removal of anionic azo dyes from aqueous solution

A novel hyper-cross-linked polyamide resin (PSI-PA) has been synthesized for the ultrahigh removal of Congo red (CR) and Eriochrom Black T (EBT) from aqueous solution. The mesoporous resin, having a specific surface area (98.80 m² g^-1), showed maximum adsorption capacity (Q_max) of 522.18 mg g^-1 for CR (pH 9.0) and 460.34 mg g^-1 for EBT (pH 6) at room temperature. The adsorption of these dyes was rapid and the equilibrium was attained within 4 h. The kinetic data was well-fitted by pseudo-second-order rate equation. Analysis of the surface chemical composition of loaded PSI-PA by XPS revealed the appearance of a new peak at around 166.0 eV (S 2p), confirming the adsorption of the sulfur-based dyes onto the resin. Examination of experimental data of dyes adsorption by a variety of non-linear adsorption isotherms and kinetic models suggested that the Langmuir model exhibited the best fit with high correlation coefficients for both CR (R² = 0.9966) and EBT (R² = 0.9934). PSI-PA has been extensively characterized by FT-IR, solid state ¹³C (CP-MAS) NMR, EDS, TGA and BET analysis. Moreover, PSI-PA exhibited 82% removal efficiency for dyes in simulated effluents, manifesting its promise and utility for treating industrial effluent.

Active and passive biosorption of Pb(II)using live and dead biomass of marine bacterium Bacillus xiamenensis PbRPSD202: Kinetics and isotherm studies

A highly lead(II) resistant (up to 2200 mg/l) bacterium PbRPSD202 was selected among 210 lead resistant bacteria isolated from marine environment of Paradeep Port, Odisha for possible biosoption of toxic Pb (II) ions from metals polluted environments. The bacterium was identified as Bacillus xiamenensis following the phenotypic as well as 16S rRNA gene sequence analysis. In addition to Pb(II), it also showed resistance towards other heavy metals like Cd(II), Cr(VI), As(III), Cu(II), Ni(II) and Zn(II). Batch biosorption of Pb(II) using both live and dead biomass of this strain was investigated under different operational parametric conditions such as pH, temperature, NaCl concentration, shaking speed, treatment time, biomass concentration and initial Pb(II) concentration. The maximum Pb(II) uptake of 216.75 and 207.4 mg/g biomass was obtained with live and dead biomass, respectively, at the optimum condition (4% w/v NaCl, pH 6.0, 35 °C, 140 rpm and 1 g/l biosorbent dose). Both active as well as passive Pb(II) bio-sorption process showed best fit with the pseudo-second-order kinetic model. The sorption mechanism was favoured with Langmuir isotherm model indicating monolayer type adsorption. FTIR and FESEM-EDX analysis further ensured the possible interactions of Pb(II) with bacterial cell surface ligands like hydroxyl, carbonyl, carboxyl and amine groups during surface adsorption. TEM analysis revealed the intracellular accumulation of lead ions. This investigation highlights the potential application of this bacterium for bioremediation of lead(II) from the multiple metals contaminated saline environment through biosorption.

Synthesis of a novel 3,5-diacrylamidobenzoic acid based hyper-cross-linked resin for the efficient adsorption of Congo Red and Rhodamine B

A novel hyper cross-linked, 3,5-diacrylamidobenzoic acid based resin (APEADA) has been synthesized for the highly efficient removal of Congo red (CR) and Rhodamine B (RhB) from aqueous solution. The synthesized resin was extensively characterized by FT-IR, FESEM, PXRD, EDX, BET analysis, TGA and solid state ¹³C (CP-MAS) NMR. APEADA exhibits thermal stability (≈ 200 °C) and a considerable surface area (64.78 m² g^-1), as suggested by Thermogravimetric Analysis (TGA) and Brunauer-Emmett-Teller (BET) analysis, respectively. The experimental data of dyes adsorption onto resin was examined by a variety of isotherm models wherein Langmuir and Temkin models were found to be the best fit for explaining the adsorption of both RhB (R² = 0.9899) and CR (R² = 0.9919). The resin can efficiently remove CR (92.03%) at pH 8.14 and moderately adsorb RhB (45.3%) at pH 5.01 and exhibits maximum adsorption capacity (Q_max) for CR (280.0 mg g^-1) and RhB (23.28 mg g^-1) at 318.6 K. The thermodynamic analysis of the data revealed that the adsorption processes were exothermic and spontaneous. Moreover, APEADA showed efficient removal efficiency (80.13%) for dyes in simulated effluents which warrants its utility and effectiveness in industrial waste water treatment.