Microtubule dynamics from mating through the first zygotic division in the budding yeast Saccharomyces cerevisiae

Mitochondrial Inheritance in Phytopathogenic Fungi-Everything Is Known, or Is It?

Mitochondria are important organelles in eukaryotes that provide energy for cellular processes. Their function is highly conserved and depends on the expression of nuclear encoded genes and genes encoded in the organellar genome. Mitochondrial DNA replication is independent of the replication control of nuclear DNA and as such, mitochondria may behave as selfish elements, so they need to be controlled, maintained and reliably inherited to progeny. Phytopathogenic fungi meet with special environmental challenges within the plant host that might depend on and influence mitochondrial functions and services. We find that this topic is basically unexplored in the literature, so this review largely depends on work published in other systems. In trying to answer elemental questions on mitochondrial functioning, we aim to introduce the aspect of mitochondrial functions and services to the study of plant-microbe-interactions and stimulate phytopathologists to consider research on this important organelle in their future projects.

Single-cell profiling screen identifies microtubule-dependent reduction of variability in signaling

Populations of isogenic cells often respond coherently to signals, despite differences in protein abundance and cell state. Previously, we uncovered processes in the Saccharomyces cerevisiae pheromone response system (PRS) that reduced cell-to-cell variability in signal strength and cellular response. Here, we screened 1,141 non-essential genes to identify 50 "variability genes". Most had distinct, separable effects on strength and variability of the PRS, defining these quantities as genetically distinct "axes" of system behavior. Three genes affected cytoplasmic microtubule function: BIM1, GIM2, and GIM4 We used genetic and chemical perturbations to show that, without microtubules, PRS output is reduced but variability is unaffected, while, when microtubules are present but their function is perturbed, output is sometimes lowered, but its variability is always high. The increased variability caused by microtubule perturbations required the PRS MAP kinase Fus3 and a process at or upstream of Ste5, the membrane-localized scaffold to which Fus3 must bind to be activated. Visualization of Ste5 localization dynamics demonstrated that perturbing microtubules destabilized Ste5 at the membrane signaling site. The fact that such microtubule perturbations cause aberrant fate and polarity decisions in mammals suggests that microtubule-dependent signal stabilization might also operate throughout metazoans.

Molecular basis of Kar9-Bim1 complex function during mating and spindle positioning

The Kar9 pathway promotes nuclear fusion during mating and spindle alignment during metaphase in budding yeast. How Kar9 supports the different outcome of these two divergent processes is an open question. Here, we show that three sites in the C-terminal disordered domain of Kar9 mediate tight Kar9 interaction with the C-terminal dimerization domain of Bim1 (EB1 orthologue). Site1 and Site2 contain SxIP motifs; however, Site3 defines a novel type of EB1-binding site. Whereas Site2 and Site3 mediate Kar9 recruitment to microtubule tips, nuclear movement and karyogamy, solely Site2 functions in spindle positioning during metaphase. Site1 in turn plays an inhibitory role during mating. Additionally, the Kar9-Bim1 complex is involved in microtubule-independent activities during mating. Together, our data reveal how multiple and partially redundant EB1-binding sites provide a microtubule-associated protein with the means to modulate its biochemical properties to promote different molecular processes during cell proliferation and differentiation.

Improved Plasmids for Fluorescent Protein Tagging of Microtubules in Saccharomyces cerevisiae

The ability to fluorescently label microtubules in live cells has enabled numerous studies of motile and mitotic processes. Such studies are particularly useful in budding yeast owing to the ease with which they can be genetically manipulated and imaged by live cell fluorescence microscopy. Because of problems associated with fusing genes encoding fluorescent proteins (FPs) to the native α-tubulin (TUB1) gene, the FP-Tub1 fusion is generally integrated into the genome such that the endogenous TUB1 locus is left intact. Although such modifications have no apparent consequences on cell viability, it is unknown if these genome-integrated FP-tubulin fusions negatively affect microtubule functions. Thus, a simple, economical and highly sensitive assay of microtubule function is required. Furthermore, the current plasmids available for generation of FP-Tub1 fusions have not kept pace with the development of improved FPs. Here, we have developed a simple and sensitive assay of microtubule function that is sufficient to identify microtubule defects that were not apparent by fluorescence microscopy or cell growth assays. Using results obtained from this assay, we have engineered a new family of 30 FP-Tub1 plasmids that use various improved FPs and numerous selectable markers that upon genome integration have no apparent defect on microtubule function.

Spatial control of microtubule length and lifetime by opposing stabilizing and destabilizing functions of Kinesin-8

BACKGROUND

To function in diverse cellular processes, the dynamic behavior of microtubules (MTs) must be differentially regulated within the cell. In budding yeast, the spindle position checkpoint (SPOC) inhibits mitotic exit in response to mispositioned spindles. To maintain SPOC-mediated anaphase arrest, astral MTs must maintain persistent interactions with and/or extend through the bud neck. However, the molecular mechanisms that ensure the stability of these interactions are not known.

RESULTS

The presence of an MT extending through and/or interacting with the bud neck is maintained by spatial control of catastrophe and rescue, which extends MT lifetime >25-fold and controls the length of dynamic MTs within the bud compartment. Moreover, the single kinesin-8 motor Kip3 alternately mediates both catastrophe and rescue of the bud MT. Kip3 accumulates in a length-dependent manner along the lattice of MTs within the bud, yet induces catastrophe spatially near the bud tip. Rather, this accumulation of Kip3 facilitates its association with depolymerizing MT plus ends, where Kip3 promotes rescue before MTs exit the bud. MT rescue within the bud requires the tail domain of Kip3, whereas the motor domain mediates catastrophe at the bud tip. In vitro, Kip3 exerts both stabilizing and destabilizing effects on reconstituted yeast MTs.

CONCLUSIONS

The kinesin-8 Kip3 is a multifunctional regulator that differentially stabilizes and destabilizes specific MTs. Control over MT catastrophe and rescue by Kip3 defines the length and lifetime of MTs within the bud compartment of cells with mispositioned spindles. This subcellular regulation of MT dynamics is critical to maintaining mitotic arrest in response to mispositioned spindles.

Mitotic spindle form and function

The Saccharomyces cerevisiae mitotic spindle in budding yeast is exemplified by its simplicity and elegance. Microtubules are nucleated from a crystalline array of proteins organized in the nuclear envelope, known as the spindle pole body in yeast (analogous to the centrosome in larger eukaryotes). The spindle has two classes of nuclear microtubules: kinetochore microtubules and interpolar microtubules. One kinetochore microtubule attaches to a single centromere on each chromosome, while approximately four interpolar microtubules emanate from each pole and interdigitate with interpolar microtubules from the opposite spindle to provide stability to the bipolar spindle. On the cytoplasmic face, two to three microtubules extend from the spindle pole toward the cell cortex. Processes requiring microtubule function are limited to spindles in mitosis and to spindle orientation and nuclear positioning in the cytoplasm. Microtubule function is regulated in large part via products of the 6 kinesin gene family and the 1 cytoplasmic dynein gene. A single bipolar kinesin (Cin8, class Kin-5), together with a depolymerase (Kip3, class Kin-8) or minus-end-directed kinesin (Kar3, class Kin-14), can support spindle function and cell viability. The remarkable feature of yeast cells is that they can survive with microtubules and genes for just two motor proteins, thus providing an unparalleled system to dissect microtubule and motor function within the spindle machine.

Distinct functional roles of β-tubulin isotypes in microtubule arrays of Tetrahymena thermophila, a model single-celled organism

BACKGROUND

The multi-tubulin hypothesis proposes that each tubulin isotype performs a unique role, or subset of roles, in the universe of microtubule function(s). To test this hypothesis, we are investigating the functions of the recently discovered, noncanonical β-like tubulins (BLTs) of the ciliate, Tetrahymena thermophila. Tetrahymena forms 17 distinct microtubular structures whose assembly had been thought to be based on single α- and β-isotypes. However, completion of the macronuclear genome sequence of Tetrahymena demonstrated that this ciliate possessed a β-tubulin multigene family: two synonymous genes (BTU1 and BTU2) encode the canonical β-tubulin, BTU2, and six genes (BLT1-6) yield five divergent β-tubulin isotypes. In this report, we examine the structural features and functions of two of the BLTs (BLT1 and BLT4) and compare them to those of BTU2.

METHODOLOGY/PRINCIPAL FINDINGS

With respect to BTU2, BLT1 and BLT4 had multiple sequence substitutions in their GTP-binding sites, in their interaction surfaces, and in their microtubule-targeting motifs, which together suggest that they have specialized functions. To assess the roles of these tubulins in vivo, we transformed Tetrahymena with expression vectors that direct the synthesis of GFP-tagged versions of the isotypes. We show that GFP-BLT1 and GFP-BLT4 were not detectable in somatic cilia and basal bodies, whereas GFP-BTU2 strongly labeled these structures. During cell division, GFP-BLT1 and GFP-BLT4, but not GFP-BTU2, were incorporated into the microtubule arrays of the macronucleus and into the mitotic apparatus of the micronucleus. GFP-BLT1 also participated in formation of the microtubules of the meiotic apparatus of the micronucleus during conjugation. Partitioning of the isotypes between nuclear and ciliary microtubules was confirmed biochemically.

CONCLUSION/SIGNIFICANCE

We conclude that Tetrahymena uses a family of distinct β-tubulin isotypes to construct subsets of functionally different microtubules, a result that provides strong support for the multi-tubulin hypothesis.

TAN lines: a novel nuclear envelope structure involved in nuclear positioning

Nuclear position is actively controlled and can be adjusted according to the needs of a cell by nuclear movement. Microtubules mediate the majority of nuclear movements studied to date, although examples of nuclear movements mediated by the actin cytoskeleton have been described. One such actin-dependent nuclear movement occurs during centrosome orientation in fibroblasts polarizing for migration. Here, the centrosome is maintained at the cell center while the nucleus is moved to the cell rear by actin retrograde flow thus positioning the centrosome between the nucleus and the leading edge of the cell. We have explored the molecular mechanism for actin dependent movement of the nucleus during centrosome centration. We found that a novel linear array of nuclear envelope membrane proteins composed of nesprin-2G and SUN2, called transmembrane actin-associated nuclear (TAN) lines, couple the nucleus to moving actin cables resulting in the nucleus being positioned toward the cell rear. TAN lines are anchored by A-type lamins and this allows the forces generated by the actin cytoskeleton to be transmitted across the nuclear envelope to move the nucleus. Here we review the data supporting this mechanism for nuclear movement, discuss questions remaining to be addressed and consider how this new mechanism of nuclear movement may shed light on human disease.

Imaging the mitotic spindle

The mitotic spindle, due to its striking form, has been imaged for well over 100 years. Composed largely of microtubules and chromosomes, the spindle also contains numerous proteins whose roles include biochemical and biophysical regulation of mitosis. Given the transient, dynamic nature of the spindle, the light microscope continues to be the main tool employed to unlock its mysteries. In this chapter, we will discuss modern light microscopy techniques commonly used for imaging this intricate cellular machine as well as provide examples and protocols. We will also describe some biological preparations and experimental regimes for investigation of the mitotic spindle.

Development and host cell modifications of Plasmodium falciparum blood stages in four dimensions

Blood stages of Plasmodium falciparum cause the pathology of malaria; however, the progression of the parasite through this complex part of the life cycle has never been visualized. In this study, we use four-dimensional imaging to show for the first time the development of individual parasites in erythrocytes and the concomitant host cell modifications. Our data visualize an unexpectedly dynamic parasite, provide a reference for this life cycle stage and challenge the model that protein export in P. falciparum is linked to the biogenesis of host cell modifications termed Maurer's clefts. Our results provide a novel view of the blood-stage development, Maurer's cleft development and protein export in malaria parasites, and open the door to study dynamic processes, drug effects and the phenotype of mutants.

The yeast ubiquitin-like domain protein Mdy2 is required for microtubule-directed nuclear migration and localizes to cytoplasmic granules in response to heat stress

MDY2 encodes a ubiquitin-like (UBL)-domain protein necessary for efficient mating in Saccharomyces cerevisiae. Unlike most UBL proteins, Mdy2 is apparently not subject to C-terminal processing and is localized predominantly in the nucleus. Deletion of MDY2 is associated with a five- to seven-fold reduction in mating efficiency, mainly due to defects in nuclear migration and karyogamy at the prezygotic stage. Here, we looked for two potential interacting partners of Mdy2, investigated the function of Mdy2 in nuclear movement, determined the increased heat sensitivity defects of mdy2Δ mutants, and inspected localization of Mdy2. Coprecipitation studies show that Mdy2 associates with α-tubulin and with the microtubule (MT)-associated dynactin subunit p150(Glued)/Nip100. nip100Δ mutants exhibit no defects in nuclear migration or in MT length or orientation during shmooing growth. Deletion of MDY2 display small nuclear migration phenotype during vegetative growth and seems to exacerbate the defects in mitotic nuclear migration seen in the nip100Δ strain. Deletion of MDY2 increased heat sensitivity of the cells and these strains accumulate mitotic nuclear migration defects and shortened MTs under these conditions. GFP-Mdy2 proteins which are localized predominantly in the nucleus at permissive temperature are localized to cytoplasmic foci during heat shock. Colocalization studies revealed that heat stress-induced enrichment of Mdy2 in cytoplasmic foci merged mainly with stress granules marker Pab1. During glucose deprivation a minority of Mdy2 foci overlapped with P-bodies marker Dcp2, while most Mdy2 foci and Pab1 foci overlap. Accordingly, we propose that Mdy2 plays a critical role in the MT-dependent processes of karyogamy and stress response.

Methods for expressing and analyzing GFP-tubulin and GFP-microtubule-associated proteins

Important advances in our understanding of the organization and dynamics of the cytoskeleton have been made by direct observations of fluorescently tagged cytoskeletal proteins in living cells. In early experiments, the cytoskeletal protein of interest was purified, covalently modified with a fluorescent dye, and microinjected into living cells. In the mid-1990s, a powerful new technology arose: Researchers developed methods for expressing chimeric proteins consisting of the gene of interest fused to green fluorescent protein (GFP). This approach has become a standard method for characterizing protein localization and dynamics. More recently, a profusion of "XFP" (spectral variants of GFP) has been developed, allowing researchers straightforwardly to perform experiments ranging from simultaneous co-observation of protein dynamics to fluorescence recovery after photobleaching (FRAP), fluorescence resonance energy transfer (FRET), and subresolution techniques such as stimulated emission-depletion microscopy (STED) and photoactivated localization microscopy (PALM). In this article, the methods used to express and analyze GFP- and/or XFP-tagged tubulin and microtubule-associated proteins (MAPs) are discussed. Although some details may be system-specific, the methods and considerations outlined here can be adapted to a wide variety of proteins and organisms.

Coordinating mitosis with cell polarity: Molecular motors at the cell cortex

In many cell divisions, the position of the spindle apparatus is coordinated with polarity signals at the cell cortex so that copies of the genome are delivered to regions of the cell that are designated for differential inheritance by the two progeny. To coordinate spindle position with cell polarity, the spindle interfaces with elements on the cortex, where molecular motors often produce the forces that power displacement. Here we describe the molecular pathways by which cortical motors translocate the spindle in budding yeast, where the mechanisms are understood relatively well, and we compare these pathways to spindle positioning processes in metazoan systems, where the molecular details are less well understood.

Using movies to analyse gene circuit dynamics in single cells

Many bacterial systems rely on dynamic genetic circuits to control crucial biological processes. A major goal of systems biology is to understand these behaviours in terms of individual genes and their interactions. However, traditional techniques based on population averages 'wash out' crucial dynamics that are either unsynchronized between cells or are driven by fluctuations, or 'noise', in cellular components. Recently, the combination of time-lapse microscopy, quantitative image analysis and fluorescent protein reporters has enabled direct observation of multiple cellular components over time in individual cells. In conjunction with mathematical modelling, these techniques are now providing powerful insights into genetic circuit behaviour in diverse microbial systems.

The mating-specific Galpha interacts with a kinesin-14 and regulates pheromone-induced nuclear migration in budding yeast

As a budding yeast cell elongates toward its mating partner, cytoplasmic microtubules connect the nucleus to the cell cortex at the growth tip. The Kar3 kinesin-like motor protein is then thought to stimulate plus-end depolymerization of these microtubules, thus drawing the nucleus closer to the site where cell fusion and karyogamy will occur. Here, we show that pheromone stimulates a microtubule-independent interaction between Kar3 and the mating-specific Galpha protein Gpa1 and that Gpa1 affects both microtubule orientation and cortical contact. The membrane localization of Gpa1 was found to polarize early in the mating response, at about the same time that the microtubules begin to attach to the incipient growth site. In the absence of Gpa1, microtubules lose contact with the cortex upon shrinking and Kar3 is improperly localized, suggesting that Gpa1 is a cortical anchor for Kar3. We infer that Gpa1 serves as a positional determinant for Kar3-bound microtubule plus ends during mating.

Yeast mating: a model system for studying cell and nuclear fusion

Haploid yeast cells mate to form a zygote, whose progeny are diploid cells. A fundamentally sexual event, related to fertilization, yeast mating nevertheless exhibits cytological properties that appear similar to somatic cell fusion. A large collection of mutations that lead to defects in various stages of mating, including cell fusion, has allowed a detailed dissection of the overall pathway. Recent advances in imaging methods, together with powerful methods of genetic analysis, make yeast mating a superb platform for investigation of cell fusion. An understanding of yeast cell fusion will provide insight into fundamental mechanisms of cell signaling, cell polarization, and membrane fusion.

The protease activity of yeast separase (esp1) is required for anaphase spindle elongation independently of its role in cleavage of cohesin

Separase is a caspase-family protease required for the metaphase-anaphase transition in eukaryotes. In budding yeast, the separase ortholog, Esp1, has been shown to cleave a subunit of cohesin, Mcd1 (Scc1), thereby releasing sister chromatids from cohesion and allowing anaphase. However, whether Esp1 has other substrates required for anaphase has been controversial. Whereas it has been reported that cleavage of Mcd1 is sufficient to trigger anaphase in the absence of Esp1 activation, another study using a temperature-sensitive esp1 mutant concluded that depletion of Mcd1 was not sufficient for anaphase in the absence of Esp1 function. Here we revisit the issue and demonstrate that neither depletion of Mcd1 nor ectopic cleavage of Mcd1 by Tev1 protease is sufficient to support anaphase in an esp1 temperature-sensitive mutant. Furthermore, we demonstrate that the catalytic activity of the Esp1 protease is required for this Mcd1-independent anaphase function. These data suggest that another protein, possibly a spindle-associated protein, is cleaved by Esp1 to allow anaphase. Such a function is consistent with the previous observation that Esp1 localizes to the mitotic spindle during anaphase.

Cell fusion assays for yeast mating pairs

Yeast mating provides an accessible genetic system for the discovery of fundamental mechanisms in eukaryotic cell fusion. Although aspects of yeast mating related to pheromone signaling and polarized growth have been intensively investigated, fusion itself is poorly understood. This chapter describes methods for measuring the overall efficiency of yeast cell fusion and for monitoring various stages of the fusion process including cell wall remodeling, plasma membrane fusion, and nuclear fusion.

Nuclear fusion during yeast mating occurs by a three-step pathway

In Saccharomyces cerevisiae, mating culminates in nuclear fusion to produce a diploid zygote. Two models for nuclear fusion have been proposed: a one-step model in which the outer and inner nuclear membranes and the spindle pole bodies (SPBs) fuse simultaneously and a three-step model in which the three events occur separately. To differentiate between these models, we used electron tomography and time-lapse light microscopy of early stage wild-type zygotes. We observe two distinct SPBs in ∼80% of zygotes that contain fused nuclei, whereas we only see fused or partially fused SPBs in zygotes in which the site of nuclear envelope (NE) fusion is already dilated. This demonstrates that SPB fusion occurs after NE fusion. Time-lapse microscopy of zygotes containing fluorescent protein tags that localize to either the NE lumen or the nucleoplasm demonstrates that outer membrane fusion precedes inner membrane fusion. We conclude that nuclear fusion occurs by a three-step pathway.

Yeast peroxisomes multiply by growth and division

Peroxisomes can arise de novo from the endoplasmic reticulum (ER) via a maturation process. Peroxisomes can also multiply by fission. We have investigated how these modes of multiplication contribute to peroxisome numbers in Saccharomyces cerevisiae and the role of the dynamin-related proteins (Drps) in these processes. We have developed pulse-chase and mating assays to follow the fate of existing peroxisomes, de novo–formed peroxisomes, and ER-derived preperoxisomal structures. We find that in wild-type (WT) cells, peroxisomes multiply by fission and do not form de novo. A marker for the maturation pathway, Pex3-GFP, is delivered from the ER to existing peroxisomes. Strikingly, cells lacking peroxisomes as a result of a segregation defect do form peroxisomes de novo. This process is slower than peroxisome multiplication in WT cells and is Drp independent. In contrast, peroxisome fission is Drp dependent. Our results show that peroxisomes multiply by growth and division under our assay conditions. We conclude that the ER to peroxisome pathway functions to supply existing peroxisomes with essential membrane constituents.

Vik1 modulates microtubule-Kar3 interactions through a motor domain that lacks an active site

Conventional kinesin and class V and VI myosins coordinate the mechanochemical cycles of their motor domains for processive movement of cargo along microtubules or actin filaments. It is widely accepted that this coordination is achieved by allosteric communication or mechanical strain between the motor domains, which controls the nucleotide state and interaction with microtubules or actin. However, questions remain about the interplay between the strain and the nucleotide state. We present an analysis of Saccharomyces cerevisiae Kar3/Vik1, a heterodimeric C-terminal Kinesin-14 containing catalytic Kar3 and the nonmotor protein Vik1. The X-ray crystal structure of Vik1 exhibits a similar fold to the kinesin and myosin catalytic head, but lacks an ATP binding site. Vik1 binds more tightly to microtubules than Kar3 and facilitates cooperative microtubule decoration by Kar3/Vik1 heterodimers, and yet allows motility. These results demand communication between Vik1 and Kar3 via a mechanism that coordinates their interactions with microtubules.

Phosphorylation of Spc110p by Cdc28p-Clb5p kinase contributes to correct spindle morphogenesis in S. cerevisiae

Spindle morphogenesis is regulated by cyclin-dependent kinases and monitored by checkpoint pathways to accurately coordinate chromosomal segregation with other events in the cell cycle. We have previously dissected the contribution of individual B-type cyclins to spindle morphogenesis in Saccharomyces cerevisiae. We showed that the S-phase cyclin Clb5p is required for coupling spindle assembly and orientation. Loss of Clb5p-dependent kinase abolishes intrinsic asymmetry between the spindle poles resulting in lethal translocation of the spindle into the bud with high penetrance in diploid cells. This phenotype was exploited in a screen for high dosage suppressors that yielded spc110(Delta)(13), encoding a truncation of the spindle pole body component Spc110p (the intranuclear receptor for the gamma-tubulin complex). We found that Clb5p-GFP was localised to the spindle poles and intranuclear microtubules and that Clb5p-dependent kinase promoted cell cycle dependent phosphorylation of Spc110p contributing to spindle integrity. Two cyclin-dependent kinase consensus sites were required for this phosphorylation and were critical for the activity of spc110(Delta)(13) as a suppressor. Together, our results point to the function of cyclin-dependent kinase phosphorylation of Spc110p and provide, in addition, support to a model for Clb5p control of spindle polarity at the level of astral microtubule organisation.

Role of transcription factor Kar4 in regulating downstream events in the Saccharomyces cerevisiae pheromone response pathway

Yeast Kar4 is a putative transcription factor required for karyogamy (the fusion of haploid nuclei during mating) and possibly other functions. Previously known to be required only for the transcriptional induction of KAR3 and CIK1, microarray experiments identified many genes regulated by Kar4 in both mating and mitosis. Several gene clusters are positively or negatively regulated by mating pheromone in a Kar4-dependent manner. Chromatin immunoprecipitation and gel shift assays confirmed that Kar4 binds to regulatory DNA sequences upstream of KAR3. Together with one-hybrid experiments, these data support a model in which both Kar4 and Ste12 bind jointly to the KAR3 promoter. Analysis of the upstream regions of Kar4-induced genes identified a DNA sequence motif that may be a binding site for Kar4. Mutation within the motif upstream of KAR3 eliminated pheromone induction. Genes regulated by Kar4, on average, are delayed in their temporal expression and exhibit a more stringent dose response to pheromone. Furthermore, the induction of Kar4 by pheromone is necessary for the delayed temporal induction of KAR3 and PRM2, genes required for efficient nuclear fusion during mating. Accordingly, we propose that Kar4 plays a critical role in the choreography of the mating response.

Microtubule dynamics in the budding yeast mating pathway

In order for haploid gametes to fuse during fertilization, microtubules (MTs) must generate forces that are sufficient to move the nuclei together. Nuclear movements during fertilization rely on microtubule-associated proteins (MAPs), many of which have been characterized extensively during mitosis. A useful model system to study MT-dependent forces before nuclear fusion, or karyogamy, is the mating pathway of budding yeast. Dynamic MTs are guided to the mating projection (shmoo tip) when plus-end-binding proteins interact with polarized actin microfilaments. If two shmoo tips are in proximity they may fuse, dissolving the MT-cortical interactions. Subsequently, oppositely oriented MT plus ends interact and draw the nuclei together. The plus-end-binding proteins in the yeast mating pathway are conserved in metazoan cells and may play a role in higher eukaryotic fertilizaton. Thus, understanding the mechanism of plus end orientation and karyogamy in budding yeast will reveal mechanisms of MT-dependent force generation conserved throughout evolution.

FUS1 regulates the opening and expansion of fusion pores between mating yeast

Mating yeast cells provide a genetically accessible system for the study of cell fusion. The dynamics of fusion pores between yeast cells were analyzed by following the exchange of fluorescent markers between fusion partners. Upon plasma membrane fusion, cytoplasmic GFP and DsRed diffuse between cells at rates proportional to the size of the fusion pore. GFP permeance measurements reveal that a typical fusion pore opens with a burst and then gradually expands. In some mating pairs, a sudden increase in GFP permeance was found, consistent with the opening of a second pore. In contrast, other fusion pores closed after permitting a limited amount of cytoplasmic exchange. Deletion of FUS1 from both mating partners caused a >10-fold reduction in the initial permeance and expansion rate of the fusion pore. Although fus1 mating pairs also have a defect in degrading the cell wall that separates mating partners before plasma membrane fusion, other cell fusion mutants with cell wall remodeling defects had more modest effects on fusion pore permeance. Karyogamy is delayed by >1 h in fus1 mating pairs, possibly as a consequence of retarded fusion pore expansion.

Mdy2, a ubiquitin-like (UBL)-domain protein, is required for efficient mating in Saccharomyces cerevisiae

MDY2, a gene required for efficient mating of the yeast Saccharomyces cerevisiae, was characterized in this study. The gene encodes a protein of 212 amino acids, which contains a ubiquitin-like (UBL) domain (residues 74-149). Deletion of MDY2 is associated with a five- to sevenfold reduction in mating efficiency, mainly due to defects in nuclear migration and karyogamy at the prezygotic stage. However, prior to mating pair fusion, shmoo formation is reduced by 30%, with a concomitant failure to form mating pairs. Strikingly, migration of the nucleus into the shmoo tip is also delayed or fails to occur. In addition, we show that in mdy2 mutants, microtubule bundles, as well as the microtubule end-binding protein Kar9, fail to localize properly to the shmoo tip, suggesting that the nuclear migration defect could be due to aberrant localization of Kar9. Pheromone signal transduction (as measured by FUS1 induction by α-factor) is not affected in mdy2Δ mutants and mitosis is also normal in these cells. MDY2 is not induced by mating pheromone. In vegetatively growing cells, GFP-Mdy2 is localized in the nucleus, and remains nuclear after exposure of cells to α-factor. His-tagged Mdy2 shows no evidence of the C-terminal processing typical of ubiquitin, and also localizes to the nucleus. Thus MDY2 is a novel gene, whose product plays a role in shmoo formation and in nuclear migration in the pre-zygote, possibly by interacting with other UBL-type proteins that possess ubiquitin association (UBA) domains.

Cik1 targets the minus-end kinesin depolymerase kar3 to microtubule plus ends

Kar3, a Saccharomyces cerevisiae Kinesin-14, is essential for karyogamy and meiosis I but also has specific functions during vegetative growth. For its various roles, Kar3 forms a heterodimer with either Cik1 or Vik1, both of which are noncatalytic polypeptides. Here, we present the first biochemical characterization of Kar3Cik1, the kinesin motor that is essential for karyogamy. Kar3Cik1 depolymerizes microtubules from the plus end and promotes robust minus-end-directed microtubule gliding. Immunolocalization studies show that Kar3Cik1 binds preferentially to one end of the microtubule, whereas the Kar3 motor domain, in the absence of Cik1, exhibits significantly higher microtubule lattice binding. Kar3Cik1-promoted microtubule depolymerization requires ATP turnover, and the kinetics fit a single exponential function. The disassembly mechanism is not microtubule catastrophe like that induced by the MCAK Kinesin-13s. Soluble tubulin does not activate the ATPase activity of Kar3Cik1, and there is no evidence of Kar3Cik1(.)tubulin complex formation as observed for MCAK. These results reveal a novel mechanism to regulate microtubule depolymerization. We propose that Cik1 targets Kar3 to the microtubule plus end. Kar3Cik1 then uses its minus-end-directed force to depolymerize microtubules from the plus end, with each tubulin-subunit release event tightly coupled to one ATP turnover.

The CLIP-170 orthologue Bik1p and positioning the mitotic spindle in yeast

Bik1p is the yeast Saccharomyces cerevisiae representative of the CLIP-170 family of microtubule plus-end tracking proteins. Bik1p shares a number of similarities with its mammalian counterpart CLIP-170, including an important role in dynein function. However, Bik1p and CLIP-170 differ in several significant ways, including the mechanisms utilized to track microtubule plus ends. In addition to presenting functional comparisons between Bik1p and CLIP-170, we provide sequence analyses that reveal previously unrecognized similarities between Bik1p and its animal counterparts. We examine in detail what is known about the functions of Bik1p and consider the various roles that Bik1p plays in positioning the yeast mitotic spindle. This chapter also highlights several recent findings, including the contribution of Bik1p to the yeast mating pathway.

Nuclear congression is driven by cytoplasmic microtubule plus end interactions in S. cerevisiae

Nuclear movement before karyogamy in eukaryotes is known as pronuclear migration or as nuclear congression in Saccharomyces cerevisiae. In this study, S. cerevisiae is used as a model system to study microtubule (MT)-dependent nuclear movements during mating. We find that nuclear congression occurs through the interaction of MT plus ends rather than sliding and extensive MT overlap. Furthermore, the orientation and attachment of MTs to the shmoo tip before cell wall breakdown is not required for nuclear congression. The MT plus end–binding proteins Kar3p, a class 14 COOH-terminal kinesin, and Bik1p, the CLIP-170 orthologue, localize to plus ends in the shmoo tip and initiate MT interactions and depolymerization after cell wall breakdown. These data support a model in which nuclear congression in budding yeast occurs by plus end MT capture and depolymerization, generating forces sufficient to move nuclei through the cytoplasm. This is the first evidence that MT plus end interactions from oppositely oriented organizing centers can provide the force for organelle transport in vivo.

Microtubules: Kar3 Eats up the Track

Molecular motors are quintessential bio-machines found throughout phylogeny. A new application of in vitro assays highlights an unexpected dual functionality for the motor domain of the microtubule-based kinesin-14 type motor protein from budding yeast.

Lrg1p Is a Rho1 GTPase-activating protein required for efficient cell fusion in yeast

To identify additional cell fusion genes in Saccharomyces cerevisiae, we performed a high-copy suppressor screen of fus2Delta. Higher dosage of three genes, BEM1, LRG1, and FUS1, partially suppressed the fus2Delta cell fusion defect. BEM1 and FUS1 were high-copy suppressors of many cell-fusion-defective mutations, whereas LRG1 suppressed only fus2Delta and rvs161Delta. Lrg1p contains a Rho-GAP homologous region. Complete deletion of LRG1, as well as deletion of the Rho-GAP coding region, caused decreased rates of cell fusion and diploid formation comparable to that of fus2Delta. Furthermore, lrg1Delta caused a more severe mating defect in combination with other cell fusion mutations. Consistent with an involvement in cell fusion, Lrg1p localized to the tip of the mating projection. Lrg1p-GAP domain strongly and specifically stimulated the GTPase activity of Rho1p, a regulator of beta(1-3)-glucan synthase in vitro. beta(1-3)-glucan deposition was increased in lrg1Delta strains and mislocalized to the tip of the mating projection in fus2Delta strains. High-copy LRG1 suppressed the mislocalization of beta(1-3) glucan in fus2Delta strains. We conclude that Lrg1p is a Rho1p-GAP involved in cell fusion and speculate that it acts to locally inhibit cell wall synthesis to aid in the close apposition of the plasma membranes of mating cells.

Differential contribution of Bud6p and Kar9p to microtubule capture and spindle orientation in S. cerevisiae

In Saccharomyces cerevisiae, spindle orientation is controlled by a temporal and spatial program of microtubule (MT)–cortex interactions. This program requires Bud6p/Aip3p to direct the old pole to the bud and confine the new pole to the mother cell. Bud6p function has been linked to Kar9p, a protein guiding MTs along actin cables. Here, we show that Kar9p does not mediate Bud6p functions in spindle orientation. Based on live microscopy analysis, kar9Δ cells maintained Bud6p-dependent MT capture. Conversely, bud6Δ cells supported Kar9p-associated MT delivery to the bud. Moreover, additive phenotypes in bud6Δ kar9Δ or bud6Δ dyn1Δ mutants underscored the separate contributions of Bud6p, Kar9p, and dynein to spindle positioning. Finally, tub2^C354S, a mutation decreasing MT dynamics, suppressed a kar9Δ mutation in a BUD6-dependent manner. Thus, Kar9p-independent capture at Bud6p sites can effect spindle orientation provided MT turnover is reduced. Together, these results demonstrate Bud6p function in MT capture at the cell cortex, independent of Kar9p-mediated MT delivery along actin cables.

Quantitative fluorescent speckle microscopy: where it came from and where it is going

Fluorescent speckle microscopy (FSM) is a technology for analysing the dynamics of macromolecular assemblies. Originally, the effect of random speckle formation was discovered with microtubules. Since then, the method has been expanded to other proteins of the cytoskeleton such as f-actin and microtubule binding proteins. Newly developed, specialized software for analysing speckle movement and photometric fluctuation in the context of polymer transport and turnover has turned FSM into a powerful method for the study of cytoskeletal dynamics in cell migration, division, morphogenesis and neuronal path finding. In all these settings, FSM serves as the quantitative readout to link molecular and genetic interventions to complete maps of the cytoskeleton dynamics and thus can be used for the systematic deciphering of molecular regulation of the cytoskeleton. Fully automated FSM assays can also be applied to live-cell screens for toxins, chemicals, drugs and genes that affect cytoskeletal dynamics. We envision that FSM has the potential to become a core tool in automated, cell-based molecular diagnostics in cases where variations in cytoskeletal dynamics are a sensitive signal for the state of a disease, or the activity of a molecular perturbant. In this paper, we review the origins of FSM, discuss these most recent technical developments and give a glimpse to future directions and potentials of FSM. It is written as a complement to the recent review (Waterman-Storer & Danuser, 2002, Curr. Biol., 12, R633-R640), in which we emphasized the use of FSM in cell biological applications. Here, we focus on the technical aspects of making FSM a quantitative method.

The minus end-directed motor Kar3 is required for coupling dynamic microtubule plus ends to the cortical shmoo tip in budding yeast

The budding yeast shmoo tip is a model system for analyzing mechanisms coupling force production to microtubule plus-end polymerization/depolymerization. Dynamic plus ends of astral microtubules interact with the shmoo tip in mating yeast cells, positioning nuclei for karyogamy. We have used live-cell imaging of GFP fusions to identify proteins that couple dynamic microtubule plus ends to the shmoo tip. We find that Kar3p, a minus end-directed kinesin motor protein, is required, whereas the other cytoplasmic motors, dynein and the kinesins Kip2p and Kip3p, are not. In the absence of Kar3p, attached microtubule plus ends released from the shmoo tip when they switched to depolymerization. Furthermore, microtubules in cells expressing kar3-1, a mutant that results in rigor binding to microtubules [2], were stabilized specifically at shmoo tips. Imaging of Kar3p-GFP during mating revealed that fluorescence at the shmoo tip increased during periods of microtubule depolymerization. These data are the first to localize the activity of a minus end-directed kinesin at the plus ends of microtubules. We propose a model in which Kar3p couples depolymerizing microtubule plus ends to the cell cortex and the Bim1p-Kar9p protein complex maintains attachment during microtubule polymerization. In support of this model, analysis of Bim1p-GFP at the shmoo tip results in a localization pattern complementary to that of Kar3p-GFP.

Spindle orientation in Saccharomyces cerevisiae depends on the transport of microtubule ends along polarized actin cables

Microtubules and actin filaments interact and cooperate in many processes in eukaryotic cells, but the functional implications of such interactions are not well understood. In the yeast Saccharomyces cerevisiae, both cytoplasmic microtubules and actin filaments are needed for spindle orientation. In addition, this process requires the type V myosin protein Myo2, the microtubule end-binding protein Bim1, and Kar9. Here, we show that fusing Bim1 to the tail of the Myo2 is sufficient to orient spindles in the absence of Kar9, suggesting that the role of Kar9 is to link Myo2 to Bim1. In addition, we show that Myo2 localizes to the plus ends of cytoplasmic microtubules, and that the rate of movement of these cytoplasmic microtubules to the bud neck depends on the intrinsic velocity of Myo2 along actin filaments. These results support a model for spindle orientation in which a Myo2-Kar9-Bim1 complex transports microtubule ends along polarized actin cables. We also present data suggesting that a similar process plays a role in orienting cytoplasmic microtubules in mating yeast cells.

Nuclear positioning: the means is at the ends

The nucleus, like other smaller organelles in the cell, is dynamic and can move about in the cytoplasm. In some cells, nuclear movements are concerned with mitosis or meiosis; in others, they are concerned with orienting nuclear divisions; and in still others, they deal with distributing nuclei through the cytoplasm. Recent interest in nuclear positioning has shown that nuclear movements are often mediated by the interactions of dynein and other proteins at the plus ends of astral microtubules with the cell cortex. How the microtubule minus ends interact with the nucleus also affects nuclear movements.

Kar9p-independent microtubule capture at Bud6p cortical sites primes spindle polarity before bud emergence in Saccharomyces cerevisiae

Spindle orientation is critical for accurate chromosomal segregation in eukaryotic cells. In the yeast Saccharomyces cerevisiae, orientation of the mitotic spindle is achieved by a program of microtubule-cortex interactions coupled to spindle morphogenesis. We previously implicated Bud6p in directing microtubule capture throughout this program. Herein, we have analyzed cells coexpressing GFP:Bud6 and GFP:Tub1 fusions, providing a kinetic view of Bud6p-microtubule interactions in live cells. Surprisingly, even during the G1 phase, microtubule capture at the recent division site and the incipient bud is dictated by Bud6p. These contacts are eliminated in bud6 delta cells but are proficient in kar9 delta cells. Thus, Bud6p cues microtubule capture, as soon as a new cell polarity axis is established independent of Kar9p. Bud6p increases the duration of interactions and promotes distinct modes of cortical association within the bud and neck regions. In particular, microtubule shrinkage and growth at the cortex rarely occur away from Bud6p sites. These are the interactions selectively impaired at the bud cortex in bud6 delta cells. Finally, interactions away from Bud6p sites within the bud differ from those occurring at the mother cell cortex, pointing to the existence of an independent factor controlling cortical contacts in mother cells after bud emergence.

New directions for fluorescent speckle microscopy

Fluorescent Speckle Microscopy (FSM) is a technology for analyzing cytoskeleton dynamics, giving novel insight into their roles in living cells. New applications of FSM, together with the development of computer-based FSM image analysis, will make FSM the first microscopy-based method to deliver quantitative kinetic readouts at high spatial and temporal resolution for a wide variety of macromolecular systems. Here, we review the most recent applications and developments and give a glimpse of future directions and potentials of FSM.

Mitosis and motor proteins in the filamentous ascomycete, Nectria haematococca, and some related fungi

Among filamentous fungi, mitosis has been studied in-depth in just a few species. The mitotic apparatuses in the ascomycetous Fusarium spp. are the most clearly and readily visualized in vivo within this group; fluorescent labeling is unnecessary. This superior cytological tractability has enabled detailed studies and revealing experiments that have led the way toward a more complete understanding of fungal mitosis. Some of the most important discoveries include the role of half-spindles in development of the bipolar spindle, the existence of true kinetochores in fungi, the unorthodox chromosome configurations and movements comprising metaphase and anaphase A, the attachment of astral microtubules to the plasmalemma, the role of the astral pulling force in elongating the spindle, an inwardly directed force within the spindle, and microtubule cross-bridging in both spindle and asters. Recent research has focused on the roles of microtubuleassociated motor proteins in Fusarium solani f. sp. pisi (anamorph of Nectria haematococca). Cytoplasmic dynein was shown to be involved in the development and/or maintenance of mitotic asters and necessary for motility and functionality of the interphase spindle pole body. The inwardly directed force within the anaphase spindle was shown to be produced by a kinesin-related protein, NhKRP1. Because of its superior cytological tractability, the considerable and unique knowledge we have of many aspects of its mitosis, and its genetic tractability, Fusarium solani f. sp. pisi is a good choice for further investigations of mitosis in filamentous fungi.

Levels of circumsporozoite protein in the Plasmodium oocyst determine sporozoite morphology

The sporozoite stage of the Plasmodium parasite is formed by budding from a multinucleate oocyst in the mosquito midgut. During their life, sporozoites must infect the salivary glands of the mosquito vector and the liver of the mammalian host; both events depend on the major sporozoite surface protein, the circumsporozoite protein (CS). We previously reported that Plasmodium berghei oocysts in which the CS gene is inactivated do not form sporozoites. Here, we analyzed the ultrastructure of P.berghei oocyst differentiation in the wild type, recombinants that do not produce or produce reduced amounts of CS, and corresponding complemented clones. The results indicate that CS is essential for establishing polarity in the oocyst. The amounts of CS protein correlate with the extent of development of the inner membranes and associated microtubules underneath the oocyst outer membrane, which normally demarcate focal budding sites. This is a first example of a protein controlling both morphogenesis and infectivity of a parasite stage.

Evolutionary conservation of microtubule-capture mechanisms

The dynamic nature of microtubules allows them to search the three-dimensional space of the cell. But what are they looking for? During cellular morphogenesis, microtubules are captured at sites just under the plasma membrane, and this polarizes the microtubule array and associated organelles. Recent data indicate that the signalling pathways that are involved in regulating the different microtubule cortical interactions are not only conserved between species, but also that they function in diverse processes.

Dynamic behavior of microtubules during dynein-dependent nuclear migrations of meiotic prophase in fission yeast

During meiotic prophase in fission yeast, the nucleus migrates back and forth between the two ends of the cell, led by the spindle pole body (SPB). This nuclear oscillation is dependent on astral microtubules radiating from the SPB and a microtubule motor, cytoplasmic dynein. Here we have examined the dynamic behavior of astral microtubules labeled with the green fluorescent protein during meiotic prophase with the use of optical sectioning microscopy. During nuclear migrations, the SPB mostly follows the microtubules that extend toward the cell cortex. SPB migrations start when these microtubules interact with the cortex and stop when they disappear, suggesting that these microtubules drive nuclear migrations. The microtubules that are followed by the SPB often slide along the cortex and are shortened by disassembly at their ends proximal to the cortex. In dynein-mutant cells, where nuclear oscillations are absent, the SPB never migrates by following microtubules, and microtubule assembly/disassembly dynamics is significantly altered. Based on these observations, together with the frequent accumulation of dynein at a cortical site where the directing microtubules interact, we propose a model in which dynein drives nuclear oscillation by mediating cortical microtubule interactions and regulating the dynamics of microtubule disassembly at the cortex.

Microtubule dynamics during infection-related morphogenesis of Colletotrichum lagenarium

Using a green fluorescent protein (GFP)-tubulin fusion protein, we have investigated the dynamic rearrangement of microtubules during appressorium formation of Colletotrichum lagenarium. Two alpha-tubulin genes of C. lagenarium were isolated, and GFP-alpha-tubulin protein was expressed in this fungus. The strain expressing the fusion protein formed fluorescent filaments that were disrupted by a microtubule-depolymerizing drug, benomyl, demonstrating successful visualization of microtubules. In preincubated conidia, GFP-labeled interphase microtubules, showing random orientation, were observed. At conidial germination, microtubules oriented toward a germination site. At nuclear division, when germ tubes had formed appressoria, mitotic spindles appeared inside conidia followed by disassembly of interphase microtubules. Remarkably, time-lapse views showed that interphase microtubules contact a microtubule-associated center at the cell cortex of conidia that is different from a nuclear spindle pole body (SPB) before their disassembly. Duplicated nuclear SPBs separately moved toward conidium and appressorium accompanied by astral microtubule formation. Benomyl treatment caused movement of both daughter nuclei into 70% of appressoria and affected appressorium morphogenesis. In conidia elongating hyphae without appressoria, microtubules showed polar elongation which is distinct from their random orientation inside appressoria.

DNA replication and daughter cell budding are not tightly linked in the protozoan parasite Toxoplasma gondii

In the protozoan parasite Toxoplasma gondii, cell division occurs by an unusual internal budding process whereby two daughter cells develop within and eventually subsume the mother cell. We have examined this process using inhibitors targeted at specific events in the cell cycle. By adding inhibitors to newly established parasites we were able to examine the effects of the inhibitors on parasites treated at the start of intracellular development and many hours prior to the onset of daughter cell budding. As with other eukaryotes, inhibitors of nuclear DNA synthesis blocked parasite DNA synthesis and prevented cell division. Examination of parasites treated with the nuclear DNA synthesis inhibitor aphidicolin showed that the formation of daughter apical complexes and the initiation of budding occurred as normal and only the inability of the nucleus to become incorporated into the daughter cells prevented successful cell division. Moreover, these inhibitory effects of aphidicolin were not reversible. The initiation of nuclear DNA synthesis and cell division in newly invaded Toxoplasma required both gene transcription and protein synthesis, although inhibitors of mitochondrial DNA synthesis, transcription and protein synthesis did not block parasite division. Thus, unlike most eukaryotes, Toxoplasma tachyzoites have separated nuclear DNA replication and mitosis from the events associated with cell division (daughter cell budding). This implies that Toxoplasma tachyzoites may have dispensed with specific cell cycle checkpoints present in other eukaryotes with, in particular, a DNA-replication checkpoint control either missing, or downregulated in this stage of the parasite life cycle.

Cell cycle-dependent changes in microtubule dynamics in living cells expressing green fluorescent protein-alpha tubulin

LLCPK-1 cells were transfected with a green fluorescent protein (GFP)-alpha tubulin construct and a cell line permanently expressing GFP-alpha tubulin was established (LLCPK-1alpha). The mitotic index and doubling time for LLCPK-1alpha were not significantly different from parental cells. Quantitative immunoblotting showed that 17% of the tubulin in LLCPK-1alpha cells was GFP-tubulin; the level of unlabeled tubulin was reduced to 82% of that in parental cells. The parameters of microtubule dynamic instability were compared for interphase LLCPK-1alpha and parental cells injected with rhodamine-labeled tubulin. Dynamic instability was very similar in the two cases, demonstrating that LLCPK-1alpha cells are a useful tool for analysis of microtubule dynamics throughout the cell cycle. Comparison of astral microtubule behavior in mitosis with microtubule behavior in interphase demonstrated that the frequency of catastrophe increased twofold and that the frequency of rescue decreased nearly fourfold in mitotic compared with interphase cells. The percentage of time that microtubules spent in an attenuated state, or pause, was also dramatically reduced, from 73.5% in interphase to 11.4% in mitosis. The rates of microtubule elongation and rapid shortening were not changed; overall dynamicity increased 3.6-fold in mitosis. Microtubule release from the centrosome and a subset of differentially stable astral microtubules were also observed. The results provide the first quantitative measurements of mitotic microtubule dynamics in mammalian cells.