Three-dimensional spheroid cell model of in vitro adipocyte inflammation

From development to future prospects: The adipose tissue & adipose tissue organoids

Living organisms store their energy in different forms of fats including lipid droplets, triacylglycerols, and steryl esters. In mammals and some non-mammal species, the energy is stored in adipose tissue which is the innervated specialized connective tissue that incorporates a variety of cell types such as macrophages, fibroblasts, pericytes, endothelial cells, adipocytes, blood cells, and several kinds of immune cells. Adipose tissue is so complex that the scope of its function is not only limited to energy storage, it also encompasses to thermogenesis, mechanical support, and immune defense. Since defects and complications in adipose tissue are heavily related to certain chronic diseases such as obesity, cardiovascular diseases, type 2 diabetes, insulin resistance, and cholesterol metabolism defects, it is important to further study adipose tissue to enlighten further mechanisms behind those diseases to develop possible therapeutic approaches. Adipose organoids are accepted as very promising tools for studying fat tissue development and its underlying molecular mechanisms, due to their high recapitulation of the adipose tissue in vitro. These organoids can be either derived using stromal vascular fractions or pluripotent stem cells. Due to their great vascularization capacity and previously reported incontrovertible regulatory role in insulin sensitivity and blood glucose levels, adipose organoids hold great potential to become an excellent candidate for the source of stem cell therapy. In this review, adipose tissue types and their corresponding developmental stages and functions, the importance of adipose organoids, and the potential they hold will be discussed in detail.

Lesson on obesity and anatomy of adipose tissue: new models of study in the era of clinical and translational research

Obesity is a serious global illness that is frequently associated with metabolic syndrome. Adipocytes are the typical cells of adipose organ, which is composed of at least two different tissues, white and brown adipose tissue. They functionally cooperate, interconverting each other under physiological conditions, but differ in their anatomy, physiology, and endocrine functions. Different cellular models have been proposed to study adipose tissue in vitro. They are also useful for elucidating the mechanisms that are responsible for a pathological condition, such as obesity, and for testing therapeutic strategies. Each cell model has its own characteristics, culture conditions, advantages and disadvantages. The choice of one model rather than another depends on the specific study the researcher is conducting. In recent decades, three-dimensional cultures, such as adipose spheroids, have become very attractive because they more closely resemble the phenotype of freshly isolated cells. The use of such models has developed in parallel with the evolution of translational research, an interdisciplinary branch of the biomedical field, which aims to learn a scientific translational approach to improve human health and longevity. The focus of the present review is on the growing body of data linking the use of new cell models and the spread of translational research. Also, we discuss the possibility, for the future, to employ new three-dimensional adipose tissue cell models to promote the transition from benchside to bedsite and vice versa, allowing translational research to become routine, with the final goal of obtaining clinical benefits in the prevention and treatment of obesity and related disorders.

Sexual Dimorphism's impact on adipogenesis: A three-dimensional in vitro model treated with 17β-estradiol and testosterone

Using a three-dimensional (3-D) in vitro culture model, we report the dose dependent effect of 17β-estradiol and testosterone on the adipogenic differentiation and maturation of human adipose derived stem cells (hASCs) obtained from female and male patients. Considering sexual dimorphism, we expected male and female adipocytes to respond differently to the sex steroids. Both male and female hASC spheroids were exposed to 100 nM and 500 nM of 17β-estradiol and testosterone either at the beginning of the adipogenic maturation (Phase I) to discourage intracellular triglyceride accumulation or exposed after adipogenic maturation (Phase II) to reduce the intracellular triglyceride accumulation. The results show that 17β-estradiol leads to a dose dependent reduction in intracellular triglyceride accumulation in female hASC spheroids compared to the both untreated and testosterone-treated cells. Affirming our hypothesis, 17β-estradiol prevented intracellular triglyceride accumulation during Phase I, while it stimulated lipolysis during Phase II. PPAR-γ and adiponectin gene expression also reduced upon 17β-estradiol treatment in female cells. Interestingly, 17β-estradiol and testosterone had only a modest effect on the male hASC spheroids. Collectively, our findings suggest that 17β-estradiol can prevent fat accumulation in adipocytes during early and late stages of maturation in females.

Improving obesity research: Unveiling metabolic pathways through a 3D In vitro model of adipocytes using 3T3-L1 cells

Obesity, a burgeoning global health crisis, has tripled in prevalence over the past 45 years, necessitating innovative research methodologies. Adipocytes, which are responsible for energy storage, play a central role in obesity. However, most studies in this field rely on animal models or adipocyte monolayer cell cultures, which are limited in their ability to fully mimic the complex physiology of a living organism, or pose challenges in terms of cost, time consumption, and ethical considerations. These limitations prompt a shift towards alternative methodologies. In response, here we show a 3D in vitro model utilizing the 3T3-L1 cell line, aimed at faithfully replicating the metabolic intricacies of adipocytes in vivo. Using a workable cell line (3T3-L1), we produced adipocyte spheroids and differentiated them in presence and absence of TNF-α. Through a meticulous proteomic analysis, we compared the molecular profile of our adipose spheroids with that of adipose tissue from lean and obese C57BL/6J mice. This comparison demonstrated the model's efficacy in studying metabolic conditions, with TNF-α treated spheroids displaying a notable resemblance to obese white adipose tissue. Our findings underscore the model's simplicity, reproducibility, and cost-effectiveness, positioning it as a robust tool for authentically mimicking in vitro metabolic features of real adipose tissue. Notably, our model encapsulates key aspects of obesity, including insulin resistance and an obesity profile. This innovative approach has the potential to significantly impact the discovery of novel therapeutic interventions for metabolic syndrome and obesity. By providing a nuanced understanding of metabolic conditions, our 3D model stands as a transformative contribution to in vitro research, offering a pathway for the development of small molecules and biologics targeting these pervasive health issues in humans.

Emerging models for studying adipose tissue metabolism

Understanding adipose metabolism is essential for addressing obesity and related health concerns. However, the ethical and scientific pressure to animal testing, aligning with the 3Rs, has triggered the implementation of diverse alternative models for analysing anomalies in adipose metabolism. In this review, we will address this issue from various perspectives. Traditional adipocyte cell cultures, whether animal or human-derived, offer a fundamental starting point. These systems have their merits but may not fully replicate in vivo complexity. Established cell lines are valuable for high-throughput screening but may lack the authenticity of primary-derived adipocytes, which closely mimic native tissue. To enhance model sophistication, spheroids have been introduced. These three-dimensional cultures better mimicking the in vivo microenvironment, enabling the study of intricate cell-cell interactions, gene expression, and metabolic pathways. Organ-on-a-chip (OoC) platforms take this further by integrating multiple cell types into microfluidic devices, simulating tissue-level functions. Adipose-OoC (AOoC) provides dynamic environments with applications spanning drug testing to personalized medicine and nutrition. Beyond in vitro models, genetically amenable organisms (Caenorhabditis elegans, Drosophila melanogaster, and zebrafish larvae) have become powerful tools for investigating fundamental molecular mechanisms that govern adipose tissue functions. Their genetic tractability allows for efficient manipulation and high-throughput studies. In conclusion, a diverse array of research models is crucial for deciphering adipose metabolism. By leveraging traditional adipocyte cell cultures, primary-derived cells, spheroids, AOoCs, and lower organism models, we bridge the gap between animal testing and a more ethical, scientifically robust, and human-relevant approach, advancing our understanding of adipose tissue metabolism and its impact on health.

Use of brown adipose tissue transplantation and engineering as a thermogenic therapy in obesity and metabolic disease

The induction of thermogenesis in brown adipose tissue is emerging as an attractive therapy for obesity and metabolic syndrome. However, the long-term efficacy and safety of clinical pharmaceutical agents have yet to be fully characterized. The transplantation of brown adipose tissue represents an alternative approach that might have a therapeutic effect by inducing a long-term increase in energy expenditure. However, limited tissue resources hinder the development of transplantation. Stem cell-based therapy and brown adipose tissue engineering, in addition to transplantation, represent alternative approaches that might resolve this problem. In this article, we discuss recent advances in understanding the mechanisms and applications of brown adipose tissue transplantation in the treatment of obesity and related metabolic disorders. Specifically, the induction of brown adipocytes and the fabrication of engineered brown adipose tissue as novel transplantation resources have long-term effects on ameliorating metabolic defects in rodent models. Additionally, we explore future prospects regarding the development of three-dimensional engineered brown adipose tissue and the associated challenges.

Unraveling White Adipose Tissue Heterogeneity and Obesity by Adipose Stem/Stromal Cell Biology and 3D Culture Models

The immune and endocrine dysfunctions of white adipose tissue are a hallmark of metabolic disorders such as obesity and type 2 diabetes. In humans, white adipose tissue comprises distinct depots broadly distributed under the skin (hypodermis) and as internal depots (visceral). Depot-specific ASCs could account for visceral and subcutaneous adipose tissue properties, by regulating adipogenesis and immunomodulation. More importantly, visceral and subcutaneous depots account for distinct contributions to obesity and its metabolic comorbidities. Recently, distinct ASCs subpopulations were also described in subcutaneous adipose tissue. Interestingly, the superficial layer closer to the dermis shows hyperplastic and angiogenic capacities, whereas the deep layer is considered as having inflammatory properties similar to visceral. The aim of this focus review is to bring the light of recent discoveries into white adipose tissue heterogeneity together with the biology of distinct ASCs subpopulations and to explore adipose tissue 3D models revealing their advantages, disadvantages, and contributions to elucidate the role of ASCs in obesity development. Recent advances in adipose tissue organoids opened an avenue of possibilities to recreate the main cellular and molecular events of obesity leading to a deep understanding of this inflammatory disease besides contributing to drug discovery. Furthermore, 3D organ-on-a-chip will add reproducibility to these adipose tissue models contributing to their translation to the pharmaceutical industry.

Unsung versatility of elastin-like polypeptide inspired spheroid fabrication: A review

Lately, 3D cell culture technique has gained a lot of appreciation as a research model. Augmented with technological advancements, the area of 3D cell culture is growing rapidly with a diverse array of scaffolds being tested. This is especially the case for spheroid cultures. The culture of cells as spheroids provides opportunities for unanticipated vision into biological phenomena with its application to drug discovery, metabolic profiling, stem cell research as well as tumor, and disease biology. Spheroid fabrication techniques are broadly categorised into matrix-dependent and matrix-independent techniques. While there is a profusion of spheroid fabrication substrates with substantial biological relevance, an economical, modular, and bio-compatible substrate for high throughput production of spheroids is lacking. In this review, we posit the prospects of elastin-like polypeptides (ELPs) as a broad-spectrum spheroid fabrication platform. Elastin-like polypeptides are nature inspired, size-tunable genetically engineered polymers with wide applicability in various arena of biological considerations, has been employed for spheroid culture with profound utility. The technology offers a cheap, high-throughput, reproducible alternative for spheroid culture with exquisite adaptability. Here, we will brief the applicability of 3D cultures as compared to 2D cultures with spheroids being the focal point of the review. Common approaches to spheroid fabrication are discussed with existential limitations. Finally, the versatility of elastin-like polypeptide inspired substrates for spheroid culture has been discussed.

Collagen microgel to simulate the adipocyte microenvironment for in vitro research on obesity

Obesity is linked to adipose tissue dysfunction, a dynamic endocrine organ. Two-dimensional cultures present technical hurdles hampering their ability to follow individual or cell groups for metabolic disease research. Three-dimensional type I collagen microgels with embedded adipocytes have not been thoroughly investigated to evaluate adipogenic maintenance as instrument for studying metabolic disorders. We aimed to develop a novel tunable Col-I microgel simulating the adipocyte microenvironment to maintain differentiated cells with only insulin as in vitro model for obesity research. Adipocytes were cultured and encapsulated in collagen microgels at different concentrations (2, 3 and 4 mg/mL). Collagen microgels at 3 and 4 mg/mL were more stable after 8 days of culture. However, cell viability and metabolic activity were maintained at 2 and 3 mg/mL, respectively. Cell morphology, lipid mobilization and adipogenic gene expression demonstrated the maintenance of adipocyte phenotype in an in vitro microenvironment. We demonstrated the adequate stability and biocompatibility of the collagen microgel at 3 mg/mL. Cell and molecular analysis confirmed that adipocyte phenotype is maintained over time in the absence of adipogenic factors. These findings will help better understand and open new avenues for research on adipocyte metabolism and obesity. Insight box In the context of adipose tissue dysfunction research, new struggles have arisen owing to the difficulty of cellular maintenance in 2D cultures. Herein, we sought a novel approach using a 3D type I collagen-based biomaterial to adipocyte culture with only insulin. This component was tailored as a microgel in different concentrations to support the growth and survival of adipocytes. We demonstrate that adipocyte phenotype is maintained and key adipogenesis regulators and markers are over time. The cumulative results unveil the practical advantage of this microgel platform as an in vitro model to study adipocyte dysfunction and obesity.

Obesity III: Obesogen assays: Limitations, strengths, and new directions

There is increasing evidence of a role for environmental contaminants in disrupting metabolic health in both humans and animals. Despite a growing need for well-understood models for evaluating adipogenic and potential obesogenic contaminants, there has been a reliance on decades-old in vitro models that have not been appropriately managed by cell line providers. There has been a quick rise in available in vitro models in the last ten years, including commercial availability of human mesenchymal stem cell and preadipocyte models; these models require more comprehensive validation but demonstrate real promise in improved translation to human metabolic health. There is also progress in developing three-dimensional and co-culture techniques that allow for the interrogation of a more physiologically relevant state. While diverse rodent models exist for evaluating putative obesogenic and/or adipogenic chemicals in a physiologically relevant context, increasing capabilities have been identified for alternative model organisms such as Drosophila, C. elegans, zebrafish, and medaka in metabolic health testing. These models have several appreciable advantages, including most notably their size, rapid development, large brood sizes, and ease of high-resolution lipid accumulation imaging throughout the organisms. They are anticipated to expand the capabilities of metabolic health research, particularly when coupled with emerging obesogen evaluation techniques as described herein.

Mass spectrometry-based proteomics of 3D cell culture: A useful tool to validate culture of spheroids and organoids

Worldwide obesity, defined as abnormal or excessive fat accumulation that may result in different comorbidities, is considered a pandemic condition that has nearly tripled in the last 45 years. Most studies on obesity use animal models or adipocyte monolayer cell culture to investigate adipose tissue. However, besides monolayer cell culture approaches do not fully recapitulate the physiology of living organisms, there is a growing need to reduce or replace animals in research. In this context, the development of 3D self-organized structures has provided models that better reproduce the in vitro aspects of the in vivo physiology in comparison to traditional monolayer cell culture. Besides, recent advances in omics technologies have allowed us to characterize these cultures at the proteome, metabolome, transcription factor, DNA-binding and transcriptomic levels. These two combined approaches, 3D culture and omics, have provided more realistic data about determined conditions. Thereby, here we focused on the development of an obesity study pipeline including proteomic analysis to validate adipocyte-derived spheroids. Through the combination of collected mass spectrometry data from differentiated 3T3-L1 spheroids and from murine white adipose tissue (WAT), we identified 1732 proteins in both samples. By using a comprehensive proteomic analysis, we observed that the in vitro 3D culture of differentiated adipocytes shares important molecular pathways with the WAT, including expression of proteins involved in central metabolic process of the adipose tissue. Together, our results show a combination of an orthogonal method and an image-based analysis that constitutes a useful pipeline to be applied in 3D adipocyte culture.

Engineering and Characterization of a Biomimetic Microchip for Differentiating Mouse Adipocytes in a 3D Microenvironment

Although two-dimensional (2D) cell cultures are the standard in cell research, one pivotal disadvantage is the lack of cell-cell and cell-extracellular matrix (ECM) signaling in the culture milieu. However, such signals occur in three-dimensional (3D) in vivo environments and are essential for cell differentiation, proliferation, and a range of cellular functions. In this study, we developed a microfluidic device to proliferate and differentiate functional adipose tissue and adipocytes by utilizing 3D cell culture technology. This device was used to generate a tissue-specific 3D microenvironment to differentiate 3T3-L1 preadipocytes into either visceral white adipocytes using visceral adipose tissue (VAT) or subcutaneous white adipose tissue (SAT). The microchip has been tested and validated by functional assessments including cell morphology, inflammatory response to a lipopolysaccharide (LPS) challenge, GLUT4 tracking, and gene expression analyses. The biomimetic microfluidic chip is expected to mimic functional adipose tissues that can replace 2D cell cultures and allow for more accurate analysis of adipose tissue physiology.

Perspectives on scaling production of adipose tissue for food applications

With rising global demand for food proteins and significant environmental impact associated with conventional animal agriculture, it is important to develop sustainable alternatives to supplement existing meat production. Since fat is an important contributor to meat flavor, recapitulating this component in meat alternatives such as plant based and cell cultured meats is important. Here, we discuss the topic of cell cultured or tissue engineered fat, growing adipocytes in vitro that could imbue meat alternatives with the complex flavor and aromas of animal meat. We outline potential paths for the large scale production of in vitro cultured fat, including adipogenic precursors during cell proliferation, methods to adipogenically differentiate cells at scale, as well as strategies for converting differentiated adipocytes into 3D cultured fat tissues. We showcase the maturation of knowledge and technology behind cell sourcing and scaled proliferation, while also highlighting that adipogenic differentiation and 3D adipose tissue formation at scale need further research. We also provide some potential solutions for achieving adipose cell differentiation and tissue formation at scale based on contemporary research and the state of the field.

Matrigel® enhances 3T3-L1 cell differentiation

Culturing cells on bio-gels are believed to provide a more in vivo-like extracellular matrix. 3T3-L1 cells cultured on Matrigel® significantly alteregd their proliferation and differentiation as compared to growth on tissue culture-coated polystyrene surfaces. Growth on a 250-μm thick layer of Matrigel® facilitated the formation of cellular aggregates of 3T3-L1 cells. Differentiation of 3T3-L1 cells cultured on Matrigel® demonstrated increased levels of mRNA levels for key adipogenic transcription factors (PPARγ, C/EBPα, SREBP1), lipogenic markers (FAS, FABP4, LPL, PLIN1) and markers of adipocyte maturity (LEP), compared to cells cultured directly on a polystyrene tissue culture surface. The gene expression of extracellular matrix proteins (FN1, COL1A1, COL4A1, COL6, LAM) was decreased in 3T3-L1 cells cultured on Matrigel®. Furthermore, growth on Matrigel® increased lipid accumulation in 3T3-L1 cells in the presence and absence of rosiglitazone, a thiazolidinedione routinely used to optimize differentiation in these cells. These changes in adipocyte gene expression and lipid accumulation patterns may be a result of the increased cell-cell and cell-ECM interactions occurring on the Matrigel®, a scenario that is more reflective of an in vivo model. Taken together, our data advance the understanding of the value of culturing 3T3-L1 cells on Matrigel®.

3D Adipose Tissue Culture Links the Organotypic Microenvironment to Improved Adipogenesis

Obesity and type 2 diabetes are strongly associated with adipose tissue dysfunction and impaired adipogenesis. Understanding the molecular underpinnings that control adipogenesis is thus of fundamental importance for the development of novel therapeutics against metabolic disorders. However, translational approaches are hampered as current models do not accurately recapitulate adipogenesis. Here, a scaffold-free versatile 3D adipocyte culture platform with chemically defined conditions is presented in which primary human preadipocytes accurately recapitulate adipogenesis. Following differentiation, multi-omics profiling and functional tests demonstrate that 3D adipocyte cultures feature mature molecular and cellular phenotypes similar to freshly isolated mature adipocytes. Spheroids exhibit physiologically relevant gene expression signatures with 4704 differentially expressed genes compared to conventional 2D cultures (false discovery rate < 0.05), including the concerted expression of factors shaping the adipogenic niche. Furthermore, lipid profiles of >1000 lipid species closely resemble patterns of the corresponding isogenic mature adipocytes in vivo (R2 = 0.97). Integration of multi-omics signatures with analyses of the activity profiles of 503 transcription factors using global promoter motif inference reveals a complex signaling network, involving YAP, Hedgehog, and TGFβ signaling, that links the organotypic microenvironment in 3D culture to the activation and reinforcement of PPARγ and CEBP activity resulting in improved adipogenesis.

Beyond the Extracellular Vesicles: Technical Hurdles, Achieved Goals and Current Challenges When Working on Adipose Cells

Adipose tissue and its crosstalk with other organs plays an essential role in the metabolic homeostasis of the entire body. Alteration of this communication (i.e., due to obesity) is related to the development of several comorbidities including type 2 diabetes, cardiovascular diseases, or cancer. Within the adipose depot, adipocytes are the main cell type and thus the main source of secreted molecules, which exert modulating effects not only at a local but also at a systemic level. Extracellular vesicles (EVs) have recently emerged as important mediators in cell–cell communication and account for part of the cellular secretome. In recent years, there has been a growing body of research on adipocyte-derived extracellular vesicles (Ad-EVs). However, there is still a lack of standardized methodological approaches, especially regarding primary adipocytes. In this review, we will provide an outline of crucial aspects when working on adipose-derived material, with a special focus on primary adipocytes. In parallel, we will point out current methodological challenges in the EV field and how they impact the transcriptomic, proteomic and functional evaluations of Ad-EVs.

In vitro and ex vivo models of adipocytes

Adipocytes are specialized cells with pleiotropic roles in physiology and pathology. Several types of fat cells with distinct metabolic properties coexist in various anatomically defined fat depots in mammals. White, beige, and brown adipocytes differ in their handling of lipids and thermogenic capacity, promoting differences in size and morphology. Moreover, adipocytes release lipids and proteins with paracrine and endocrine functions. The intrinsic properties of adipocytes pose specific challenges in culture. Mature adipocytes float in suspension culture due to high triacylglycerol content and are fragile. Moreover, a fully differentiated state, notably acquirement of the unilocular lipid droplet of white adipocyte, has so far not been reached in two-dimensional culture. Cultures of mouse and human-differentiated preadipocyte cell lines and primary cells have been established to mimic white, beige, and brown adipocytes. Here, we survey various models of differentiated preadipocyte cells and primary mature adipocyte survival describing main characteristics, culture conditions, advantages, and limitations. An important development is the advent of three-dimensional culture, notably of adipose spheroids that recapitulate in vivo adipocyte function and morphology in fat depots. Challenges for the future include isolation and culture of adipose-derived stem cells from different anatomic location in animal models and humans differing in sex, age, fat mass, and pathophysiological conditions. Further understanding of fat cell physiology and dysfunction will be achieved through genetic manipulation, notably CRISPR-mediated gene editing. Capturing adipocyte heterogeneity at the single-cell level within a single fat depot will be key to understanding diversities in cardiometabolic parameters among lean and obese individuals.

Generation of immune cell containing adipose organoids for in vitro analysis of immune metabolism

Adipose tissue is an organized endocrine organ with important metabolic and immunological functions and immune cell-adipocyte crosstalk is known to drive various disease pathologies. Suitable 3D adipose tissue organoid models often lack resident immune cell populations and therefore require the addition of immune cells isolated from other organs. We have created the first 3D adipose tissue organoid model which could contain and maintain resident immune cell populations of the stromal vascular fraction (SVF) and proved to be effective in studying adipose tissue biology in a convenient manner. Macrophage and mast cell populations were successfully confirmed within our organoid model and were maintained in culture without the addition of growth factors. We demonstrated the suitability of our model for monitoring the lipidome during adipocyte differentiation in vitro and confirmed that this model reflects the physiological lipidome better than standard 2D cultures. In addition, we applied mass spectrometry-based lipidomics to track lipidomic changes in the lipidome upon dietary and immunomodulatory interventions. We conclude that this model represents a valuable tool for immune-metabolic research.

Scaffold-free biofabrication of adipocyte structures with magnetic levitation

Tissue engineering research aims to repair the form and/or function of impaired tissues. Tissue engineering studies mostly rely on scaffold-based techniques. However, these techniques have certain challenges, such as the selection of proper scaffold material, including mechanical properties, sterilization, and fabrication processes. As an alternative, we propose a novel scaffold-free adipose tissue biofabrication technique based on magnetic levitation. In this study, a label-free magnetic levitation technique was used to form three-dimensional (3D) scaffold-free adipocyte structures with various fabrication strategies in a microcapillary-based setup. Adipogenic-differentiated 7F2 cells and growth D1 ORL UVA stem cells were used as model cells. The morphological properties of the 3D structures of single and cocultured cells were analyzed. The developed procedure leads to the formation of different patterns of single and cocultured adipocytes without a scaffold. Our results indicated that adipocytes formed loose structures while growth cells were tightly packed during 3D culture in the magnetic levitation platform. This system has potential for ex vivo modeling of adipose tissue for drug testing and transplantation applications for cell therapy in soft tissue damage. Also, it will be possible to extend this technique to other cell and tissue types.

Modeling Adipogenesis: Current and Future Perspective

Adipose tissue is contemplated as a dynamic organ that plays key roles in the human body. Adipogenesis is the process by which adipocytes develop from adipose-derived stem cells to form the adipose tissue. Adipose-derived stem cells’ differentiation serves well beyond the simple goal of producing new adipocytes. Indeed, with the current immense biotechnological advances, the most critical role of adipose-derived stem cells remains their tremendous potential in the field of regenerative medicine. This review focuses on examining the physiological importance of adipogenesis, the current approaches that are employed to model this tightly controlled phenomenon, and the crucial role of adipogenesis in elucidating the pathophysiology and potential treatment modalities of human diseases. The future of adipogenesis is centered around its crucial role in regenerative and personalized medicine.

Comparison of the formation, adipogenic maturation, and retention of human adipose-derived stem cell spheroids in scaffold-free culture techniques

While three-dimensional spheroids outperform traditional two-dimensional monolayer culture for human adipose-derived stem cells (hASCs), there is not a consensus on the most successful method for enhancing their adipogenic differentiation and minimizing the loss of physiologically relevant, fatty spheroids during culture. To this end, we compared three culture methods, namely, elastin-like polypeptide-polyethyleneimine (ELP-PEI) coated surfaces, ultra-low attachment static culture, and suspension culture for their ability to form and retain productive hASC spheroids. The ELP-PEI coatings used the ELP conjugated to two molecular weights of PEI (800 or 25,000 g/mol). FTIR spectroscopy, atomic force microscopy, and contact angle goniometry revealed that the ELP-PEI coatings had similar chemical structures, surface topography, and hydrophobicity. Time-lapse microscopy showed that increasing the PEI molecular weight resulted in smaller spheroids. Measurement of triglyceride content showed that the three methods induced comparable differentiation of hASCs toward the adipogenic lineage. DNA content and morphometric analysis revealed merging of spheroids to form larger spheroids in the ultra-low attachment static culture and suspension culture methods. In contrast, the retention of hASC spheroid sizes and numbers with a regular spheroid size (~100 μm) were best atop the ELP-PEI800 coatings. Overall, this research shows that the spheroid culture atop the ELP-PEI coatings is a suitable cell culture model for future studies involving long-term, three-dimensional culture of mature adipocytes derived from hASCs.

Studying Adipose Tissue in the Breast Tumor Microenvironment In Vitro: Progress and Opportunities

BACKGROUND

The breast cancer microenvironment contains a variety of stromal cells that are widely implicated in worse patient outcomes. While many in vitro models of the breast tumor microenvironment have been published, only a small fraction of these feature adipocytes. Adipocytes are a cell type increasingly recognized to have complex functions in breast cancer.

METHODS

In this review, we examine findings from recent examples of in vitro experiments modeling adipocytes within the local breast tumor microenvironment.

RESULTS

Both two-dimensional and three-dimensional models of adipocytes in the breast tumor microenvironment are covered in this review and both have uncovered interesting phenomena related to breast tumor progression.

CONCLUSION

Certain aspects of breast cancer and associated adipocyte biology: extracellular matrix effects, cell-cell contact, and physiological mass transport can only be examined with a three-dimensional culture platform. Opportunities remain for innovative improvements to be made to in vitro models that further increase what is known about adipocytes during breast cancer progression.

Murine in vitro cellular models to better understand adipogenesis and its potential applications

Adipogenesis has been extensively studied using in vitro models of cellular differentiation, enabling long-term regulation of fat cell metabolism in human adipose tissue (AT) material. Many studies promote the idea that manipulation of this process could potentially reduce the prevalence of obesity and its related diseases. It has now become essential to understand the molecular basis of fat cell development to tackle this pandemic disease, by identifying therapeutic targets and new biomarkers. This review explores murine cell models and their applications for study of the adipogenic differentiation process in vitro. We focus on the benefits and limitations of different cell line models to aid in interpreting data and selecting a good cell line model for successful understanding of adipose biology.

A 3D Self-Assembled In Vitro Model to Simulate Direct and Indirect Interactions between Adipocytes and Skeletal Muscle Cells

The molecular mechanisms of the development and progression of diabetes and obesity involve complex interactions between adipocytes and skeletal muscle cells. Although 2D in-vitro models are the gold standard for the mechanistic study of such behaviors, they do not recreate the complexity and dynamics of the interactions between the cell types involved. Alternatively, animal models are used but are expensive, difficult to visualize or analyze, are not completely representative of human physiology or genetic background, and have associated ethical considerations. 3D co-culture systems can be complementary to these approaches. Here, using a newly developed 3D biofabrication method, adipocytes and myoblasts are positioned precisely either in direct physical contact or in close proximity such that the paracrine effects could be systematically studied. Suitable protocols for growth and differentiation of both cells in the co-culture system is also developed. Cells show more restrained lipid and protein production in 3D systems compared to 2D ones and adipocytes show more lipolysis in indirect contact with myoblasts as response to drug treatment. These findings emphasize importance of physical contact between cells that have been overlooked in co-culture systems using transwell inserts and can be used in studies for the development of anti-obesity drugs.

iTRAQ-Based Quantitative Proteomic Comparison of 2D and 3D Adipocyte Cell Models Co-cultured with Macrophages Using Online 2D-nanoLC-ESI-MS/MS

The demand for novel three-dimensional (3D) cell culture models of adipose tissue has been increasing, and proteomic investigations are important for determining the underlying causes of obesity, type II diabetes, and metabolic disorders. In this study, we performed global quantitative proteomic profiling of three 3D-cultured 3T3-L1 cells (preadipocytes, adipocytes and co-cultured adipocytes with macrophages) and their 2D-cultured counterparts using 2D-nanoLC-ESI-MS/MS with iTRAQ labelling. A total of 2,885 shared proteins from six types of adipose cells were identified and quantified in four replicates. Among them, 48 proteins involved in carbohydrate metabolism (e.g., PDHα, MDH1/2, FH) and the mitochondrial fatty acid beta oxidation pathway (e.g., VLCAD, ACADM, ECHDC1, ALDH6A1) were relatively up-regulated in the 3D co-culture model compared to those in 2D and 3D mono-cultured cells. Conversely, 12 proteins implicated in cellular component organisation (e.g., ANXA1, ANXA2) and the cell cycle (e.g., MCM family proteins) were down-regulated. These quantitative assessments showed that the 3D co-culture system of adipocytes and macrophages led to the development of insulin resistance, thereby providing a promising in vitro obesity model that is more equivalent to the in vivo conditions with respect to the mechanisms underpinning metabolic syndromes and the effect of new medical treatments for metabolic disorders.

In vitro tissue-engineered adipose constructs for modeling disease

BACKGROUND

Adipose tissue is a vital tissue in mammals that functions to insulate our bodies, regulate our internal thermostat, protect our organs, store energy (and burn energy, in the case of beige and brown fat), and provide endocrine signals to other organs in the body. Tissue engineering of adipose and other soft tissues may prove essential for people who have lost this tissue from trauma or disease.

MAIN TEXT

In this review, we discuss the applications of tissue-engineered adipose tissue specifically for disease modeling applications. We provide a basic background to adipose depots and describe three-dimensional (3D) in vitro adipose models for obesity, diabetes, and cancer research applications.

CONCLUSIONS

The approaches to engineering 3D adipose models are diverse in terms of scaffold type (hydrogel-based, silk-based and scaffold-free), species of origin (H. sapiens and M. musculus) and cell types used, which allows researchers to choose a model that best fits their application, whether it is optimization of adipocyte differentiation or studying the interaction of adipocytes and other cell types like endothelial cells. In vitro 3D adipose tissue models support discoveries into the mechanisms of adipose-related diseases and thus support the development of novel anti-cancer or anti-obesity/diabetes therapies.

Part 1: A Novel Model for Three-Dimensional Culture of 3T3-L1 Preadipocytes Stimulates Spontaneous Cell Differentiation Independent of Chemical Induction Typically Required in Monolayer

Differences in monolayer and three-dimensional (3D) culture systems have been recognized for several years. Despite the recognized importance of 3D systems, low cost and convenience of monolayer culture are still readily used for metabolic and nutritional studies. Here, we present part 1 of a 2-part series that will highlight (1) a novel and cost-effective model for culturing 3T3-L1 preadipocytes in 3D agarose as well as (2) an initial study showing the successful use of this 3D model for experimental analysis of these cells treated with cinnamon extract while suspended in agarose. In part 1, we provide a full characterization of the model system for the 3T3-L1 cells that demonstrate the functionality and convenience of this system. Importantly, we note spontaneous differentiation to adipocytes while cultured under these methods, independent of chemical induction. We present a 2.5-week time course with rounded cells forming vacuoles as early as 24 hours and accumulation of lipid detectable by Oil Red O stain at 0.5 weeks. Serum selection, lipid volume determination, and cell size are characterized. We conclusively demonstrate adipogenesis based on a peroxisome proliferator-activated receptor γ (PPARγ) detection using immunohistochemistry (IHC) of sections from these 3D cultures. Methods, materials and recommendations are described as well as proposed benefits to the use of this culture system for 3T3-L1 cells.

Stem-cell based organ-on-a-chip models for diabetes research

Diabetes mellitus (DM) ranks among the severest global health concerns of the 21st century. It encompasses a group of chronic disorders characterized by a dysregulated glucose metabolism, which arises as a consequence of progressive autoimmune destruction of pancreatic beta-cells (type 1 DM), or as a result of beta-cell dysfunction combined with systemic insulin resistance (type 2 DM). Human cohort studies have provided evidence of genetic and environmental contributions to DM; yet, these studies are mostly restricted to investigating statistical correlations between DM and certain risk factors. Mechanistic studies, on the other hand, aimed at re-creating the clinical picture of human DM in animal models. A translation to human biology is, however, often inadequate owing to significant differences between animal and human physiology, including the species-specific glucose regulation. Thus, there is an urgent need for the development of advanced human in vitro models with the potential to identify novel treatment options for DM. This review provides an overview of the technological advances in research on DM-relevant stem cells and their integration into microphysiological environments as provided by the organ-on-a-chip technology.

3D collagen microfibers stimulate the functionality of preadipocytes and maintain the phenotype of mature adipocytes for long term cultures

Although adipose tissue is one of the most abundant tissues of the human body, its reconstruction remains a competitive challenge. The conventional in vitro two or three-dimensional (2D or 3D) models of mature adipocytes unfortunately lead to their quick dedifferentiation after one week, and complete differentiation of adipose derived stem cells (ADSC) usually requires more than one month. In this context, we developed biomimetic 3D adipose tissues with high density collagen by mixing type I collagen microfibers with primary mouse mature adipocytes or human ADSC in transwells. These 3D-tissues ensured a better long-term maintained phenotype of unilocular mature adipocytes, compared to 2D, with a viability of 96 ± 2% at day 14 and a good perilipin immunostaining, - the protein necessary for stabilizing the fat vesicles. For comparison, in 2D culture, mature adipocytes released their fat until splitting their single adipose vesicle into several ones with significantly 4 times smaller size. Concerning ADSC, the adipogenic genes expression in 3D-tissues was found at least doubled throughout the differentiation (over 8 times higher for GLUT4 at day 21), along with it, almost 4 times larger fat vesicles were observed (10 ± 4 µm at day 14). Perilipin immunostaining and leptin secretion, the satiety protein, attested the significantly doubled better functionality of ADSC in 3D adipose tissues. These obtained long-term maintained phenotype and fast adipogenesis make this model relevant for either cosmetic/pharmaceutical assays or plastic surgery purposes. STATEMENT OF SIGNIFICANCE: Adipose tissue has important roles in our organism, providing energy from its lipids storage and secreting many vital proteins. However, its reconstruction in a functional in vitro adipose tissue is still a challenge. Mature adipocytes directly extracted from surgery liposuctions quickly lose their lipids after a week in vitro and the use of differentiated adipose stem cells is too time-consuming. We developed a new artificial fat tissue using collagen microfibers. These tissues allowed the maintenance of viable big unilocular mature adipocytes up to two weeks and the faster adipogenic differentiation of adipose stem cells. Moreover, the adipose functionality confirmed by perilipin and leptin assessments makes this model suitable for further applications in cosmetic/pharmaceutical drug assays or for tissue reconstruction.

A new approach to study the sex differences in adipose tissue

Obesity is one of the most invaliding and preventable diseases in the United States. Growing evidence suggests that there are sex differences in obesity in human and experimental animals. However, the specific mechanisms of this disease are unknown. Consequently, there is any particular treatment according to the sex/gender at this time. During the last decade, we observe a rise in the study of adipocyte and the possible mechanisms involved in the different roles of the fat. Furthermore, the effect of sex steroids on the adipocyte is one of the fields that need elucidation. Supporting evidence suggests that sex steroids play an essential role not only in the fat distribution, but also, in its metabolism, proliferation, and function. Thus, using in vitro and in vivo studies will contribute to our fight against this critical health public problem encompassing both sexes. In the present review, we discuss some of the recent advances in the adipocytes and the effect of the sex steroids on the adipose tissue. Also, we propose a new alternative to study the role of sex steroids on adipocyte biology through human adipose-derived stem cells.

A multiple-funnels cell culture insert for the scale-up production of uniform cell spheroids

Introduction

Formation of cell spheres is an important procedure in biomedical research. A large number of high-quality cell spheres of uniform size and shape are required for basic studies and therapeutic applications. Conventional approaches, including the hanging drop method and suspension culture, are used for cell sphere production. However, these methods are time consuming, cell spheres cannot be harvested easily, and it is difficult to control the size and geometry of cell spheres. To resolve these problems, a novel multiple-funnel cell culture insert was designed for size controlling, easy harvesting, and scale-up production of cell spheres.

Methods

The culture substrate has 680 micro-funnels with a 1-mm width top, 0.89 mm depth, and 0.5 mm square bottom. Mouse embryonic stem cells were used to test the newly developed device. The seeded embryonic stem cells settled at the downward medium surface toward the bottom opening and aggregated as embryoid bodies (EBs). For cell sphere harvest, the bottom of the culture insert was put in contact with the medium surface in another culture dish, and the medium in the device flowed down with cell spheres by hydrostatic pressure.

Results

Compact cell spheres with uniform size and shape were collected easily. The diameter of the spheres could be controlled by adjusting the seeding cell density. Spontaneous neural differentiation (nestin and Tju1) and retinoic acid-induced endodermal differentiation (Pdx-1 and insulin I) were improved in the EBs produced using the new insert compared to those in EBs produced by suspension culture.

Conclusions

This novel cell culture insert shall improve future studies of cell spheres and benefit clinical applications of cell therapy.

Rapid and Versatile Cell Aggregate Formation Using Lipid-Conjugated Heparin

Cell aggregates hold significant therapeutic promise for in vitro cell analysis, ex vivo tissue models, and in vivo cell therapy and tissue engineering. Traditional methods of making cell aggregates require long incubation times and can only produce three-dimensional-spheroid-shaped aggregates. We propose a novel method of making cell aggregates of diverse sizes and shapes using lipid-conjugated heparin. Shaking the cell suspension containing a small amount of lipid-conjugated heparin for approximately 30 min produced cell aggregates. This approach can be applied to any cell type, including stem cells, fibroblast cells, and T lymphocytes. The shape of biocompatible templates could modulate the shape of cell aggregates. In addition to layered, multicompartmental cell aggregates on template, template-free, tube-shaped cell aggregates could also be made. The cell aggregates formed were alive and maintained biological activities.

Spheroid Culture System Confers Differentiated Transcriptome Profile and Functional Advantage to 3T3-L1 Adipocytes

This study highlights functional differences between 2-D monolayer and 3-D spheroid 3T3-L1 adipocyte culture models and explores the underlying genomic mechanisms responsible for the different phenotypes present. The spheroids showed higher triglyceride accumulation than the monolayer culture and further increase with larger spheroid size. Whole transcriptome analysis indicated significant differential expression of genes related to adipogenesis, including adipocytokine signaling, fatty acid metabolism, and PPAR-γ signaling. Spheroids also showed downregulation of matrix metalloproteinases (MMPs), integrin, actin-cytoskeleton associated genes, and Rho/GTPase3 expression relative to 2-D monolayer, indicating suppression of the Rho-ROCK pathway and thereby promoting adipogenic differentiation. When exposed to linoleic acid (500 μM) and TNF-α (125 ng/mL) to promote chronic adiposity, linoleic acid treatment resulted in increased intracellular triglycerides and subsequent TNF-α treatment resulted in significantly altered adipocytokine signaling, fatty acid metabolism, and PPAR signaling, in addition to upregulation of multiple MMPs in spheroids vs. monolayer. Overall, 3-D spheroids showed enhanced adipogenic phenotype as indicated by triglyceride synthesis and transcriptome changes while retaining sensitivity to a pro-inflammatory stimulus. The 3-D spheroid culture thus may provide a simple, convenient, and sensitive in vitro model to study adipocyte response to metabolic stresses relevant to clinical pathologies.

Scaffold-free generation of uniform adipose spheroids for metabolism research and drug discovery

Adipose tissue dysfunction is critical to the development of type II diabetes and other metabolic diseases. While monolayer cell culture has been useful for studying fat biology, 2D culture often does not reflect the complexity of fat tissue. Animal models are also problematic in that they are expensive, time consuming, and may not completely recapitulate human biology because of species variation. To address these problems, we have developed a scaffold-free method to generate 3D adipose spheroids from primary or immortal human or mouse pre-adipocytes. Pre-adipocytes self-organize into spheroids in hanging drops and upon transfer to low attachment plates, can be maintained in long-term cultures. Upon exposure to differentiation cues, the cells mature into adipocytes, accumulating large lipid droplets that expand with time. The 3D spheroids express and secrete higher levels of adiponectin compared to 2D culture and respond to stress, either culture-related or toxin-associated, by secreting pro-inflammatory adipokines. In addition, 3D spheroids derived from brown adipose tissue (BAT) retain expression of BAT markers better than 2D cultures derived from the same tissue. Thus, this model can be used to study both the maturation of pre-adipocytes or the function of mature adipocytes in a 3D culture environment.

Stromal cell extracellular vesicular cargo mediated regulation of breast cancer cell metastasis via ubiquitin conjugating enzyme E2 N pathway

Mesenchymal stromal cells (hMSCs) have been used to understand the stromal cell properties in solid tumors because of their ablity to differentiate into most cell types. We investigated the role of EVs from hMSCs (hMSC-EVs) in breast cancer metastasis using MDA-MB-231 parental cell line and organotropic sub-lines. We demonstrated that hMSC-EVs significantly suppressed the metastatic potential of the parental cell line when compared to their organotropic sublines. hMSC-EVs induce dormancy in the parental cell line but not in their organotropic sub-lines and miR-205 and miR-31 from EV cargo played a role. Further, Ubiquitin Conjugating Enzyme E2 N (UBE2N/Ubc13) - metastasis-regulating gene, is a target of these miRNAs and silencing of UBE2N/Ubc13 expression significantly suppressed migration, invasion, and proliferation of breast cancer cells. To summarize, hMSC-EVs support primary breast tumor progression but suppress the metastasis of breast cancer cells that are not organ-committed through the UBE2N/Ubc13 pathway and play a role in premetastic niche formation.

Dispersible oxygen microsensors map oxygen gradients in three-dimensional cell cultures

Phase fluorimetry, unlike the more commonly used intensity-based measurement, is not affected by differences in light paths from culture vessels or by optical attenuation through dense 3D cell cultures and hydrogels thereby minimizing dependence on signal intensity for accurate measurements. This work describes the use of phase fluorimetry on oxygen-sensor microbeads to perform oxygen measurements in different microtissue culture environments. In one example, cell spheroids were observed to deplete oxygen from the cell-culture medium filling the bottom of conventional microwells within minutes, whereas oxygen concentrations remained close to ambient levels for several days in hanging-drop cultures. By dispersing multiple oxygen microsensors in cell-laden hydrogels, we also mapped cell-generated oxygen gradients. The spatial oxygen mapping was sufficiently precise to enable the use of computational models of oxygen diffusion and uptake to give estimates of the cellular oxygen uptake rate and the half-saturation constant. The results show the importance of integrated design and analysis of 3D cell cultures from both biomaterial and oxygen supply aspects. While this paper specifically tests spheroids and cell-laden gel cultures, the described methods should be useful for measuring pericellular oxygen concentrations in a variety of biomaterials and culture formats.

The Use of Silk as a Scaffold for Mature, Sustainable Unilocular Adipose 3D Tissue Engineered Systems

There is a critical need for monitoring physiologically relevant, sustainable, human adipose tissues in vitro to gain new insights into metabolic diseases. To support long-term culture, a 3D silk scaffold assisted culture system is developed that maintains mature unilocular adipocytes ex vivo in coculture with preadipocytes, endothelial cells, and smooth muscle cells obtained from small volumes of liquefied adipose samples. Without the silk scaffold, adipose tissue explants cannot be sustained in long-term culture (3 months) due to their fragility. Adjustments to media components are used to tune lipid metabolism and proliferation, in addition to responsiveness to an inflammatory stimulus. Interestingly, patient specific responses to TNFα stimulation are observed, providing a proof-of-concept translational technique for patient specific disease modeling in the future. In summary, this novel 3D scaffold assisted approach is required for establishing physiologically relevant, sustainable, human adipose tissue systems from small volumes of lipoaspirate, making this methodology of great value to studies of metabolism, adipokine-driven diseases, and other diseases where the roles of adipocytes are only now becoming uncovered.

Cell Models and Their Application for Studying Adipogenic Differentiation in Relation to Obesity: A Review

Over the last several years, the increasing prevalence of obesity has favored an intense study of adipose tissue biology and the precise mechanisms involved in adipocyte differentiation and adipogenesis. Adipocyte commitment and differentiation are complex processes, which can be investigated thanks to the development of diverse in vitro cell models and molecular biology techniques that allow for a better understanding of adipogenesis and adipocyte dysfunction associated with obesity. The aim of the present work was to update the different animal and human cell culture models available for studying the in vitro adipogenic differentiation process related to obesity and its co-morbidities. The main characteristics, new protocols, and applications of the cell models used to study the adipogenesis in the last five years have been extensively revised. Moreover, we depict co-cultures and three-dimensional cultures, given their utility to understand the connections between adipocytes and their surrounding cells in adipose tissue.

Impact of TNF and IL-1β on capillary networks within engineered human adipose tissues

Inflammatory cytokines lead to capillary network disorganization and secreted factor modulation within human microvascularized engineered adipose tissues.

Special Collection: Emerging Concepts in Three-Dimensional Microtissues

Over the past decade, the concept of tissue engineering has been extended to include technologies that use multicellular aggregates, not only to repair or replace tissue but also as a stand-alone in vitro device (e.g., "organ-on-a-chip") with well-defined biological outputs. The advantage of such systems is that they allow for culture of one or more cell types in three dimensions, which may promote tissue function that is more mimetic of the in vivo state, while allowing high-throughput sample testing and a large degree of control of external culture factors that may lead to more reproducible results than that found in the more complex in vivo environment. While the means used to achieve these devices vary greatly, in this special collection, we focus our attention on formation and use of scaffold-free cellular aggregates (three-dimensional microtissues).