In slow motion: radula motion pattern and forces exerted to the substrate in the land snail Cornu aspersum (Mollusca, Gastropoda) during feeding

Radular Tooth Coating in Members of Dendronotidae and Flabellinidae (Nudibranchia, Gastropoda, Mollusca)

Nudibranchs, with their mesmerizing diversity and ecological significance, play crucial roles in marine ecosystems. Central to their feeding prowess is the radula, a chitinous structure with diverse morphologies adapted to prey preferences and feeding strategies. This study focuses on elucidating wear coping mechanisms in radular teeth of carnivorous molluscs, employing Dendronotus lacteus (Dendronotidae) and Flabellina affinis (Flabellinidae) as model species. Both species forage on hydrozoans. Through scanning electron microscopy, confocal laser scanning microscopy, nanoindentation, and energy-dispersive X-ray spectroscopy, the biomechanical and compositional properties of their teeth were analyzed. Notably, tooth coatings, composed of calcium (Ca) or silicon (Si) and high hardness and stiffness compared to the internal tooth structure, with varying mineral contents across tooth regions and ontogenetic zones, were found. The presence of the hard and stiff tooth coatings highlight their role in enhancing wear resistance. The heterogeneities in the autofluorescence patterns related to the distribution of Ca and Si of the coatings. Overall, this study provides into the biomechanical adaptations of nudibranch radular teeth, shedding light on the intricate interplay between tooth structure, elemental composition, and ecological function in marine molluscs.

Performance of biological food processing interfaces: Perspectives on the science of mollusc radula

The Mollusca comprises a diverse range of organisms, with the class Gastropoda alone boasting approximately 80 000 extant species. Their adaptability across various habitats is facilitated by the evolution of the radula, a key structure for food acquisition. The radula's composition and mechanical properties, including its chitinous membrane, teeth, and supporting structures, enable efficient food gathering and processing. Through adaptive tooth morphology and composition, an interplay between radular components is facilitated, which results in collective effects to withstand forces encountered during feeding and reduce structural failure, with the broad range of variations reflecting ecological niches. Furthermore, teeth consist of composite materials with sometimes high contents of iron, calcium, or silicon to reduce wear. During interaction with the food, the radula performs complex three-dimensional motions, challenging to document. Here, we provide a review on the morphology, the mechanical properties, the composition, and various other parameters that contribute to radular performance. Due to, e.g., the smallness of these structures, there are, however, limitations to radular research. However, numerical simulations and physical models tested on substrates offer avenues for further understanding radular function and performance during feeding. These studies not only advance our knowledge of molluscan biology and ecology but also provide inspirations for biomimetic design and further advances in materials engineering.

Wear patterns of radular teeth in Loligo vulgaris (Cephalopoda; Mollusca) are related to their structure and mechanical properties

Radular teeth have to cope with wear, when interacting with ingesta. In some molluscan taxa, wear-coping mechanisms, related to the incorporation of high contents of iron or silica, have been previously determined. For most species, particularly for those which possess radulae without such incorporations, wear-coping mechanisms are understudied. In the present study, we documented and characterized the wear on radular teeth in the model species Loligo vulgaris (Cephalopoda). By applying a range of methods, the elementary composition and mechanical properties of the teeth were described, to gain insight into mechanisms for coping with abrasion. It was found that the tooth regions that are prone to wear are harder and stiffer. Additionally, the surfaces interacting with the ingesta possessed a thin coating with high contents of silicon, probably reducing abrasion. The here presented data may serve as an example of systematic study of radular wear, in order to understand the relationship between the structure of radular teeth and their properties.

Three-dimensional visualization of predatory gastropod feeding teeth with synchrotron scanning

Several families of neogastropod mollusks independently evolved the ability to drill through mineralized prey skeletons using their own mineralized feeding teeth, sometimes with shell-softening chemical agents produced by an organ in the foot. Teeth with more durable tooth shapes should extend their use and improve predator performance, but past studies have described only the cusped-side of teeth, mostly overlooking morphologies related to functional interactions between teeth. Here, we describe the three-dimensional morphology of the central drilling tooth (rachidian) from four species of the neogastropod family Muricidae using synchrotron tomographic microscopy and assemble a three-dimensional model of a multitooth series in drilling position for two of them to investigate their dynamic form. We find two new types of articulating surfaces, including a saddle joint at either end of the rachidian and a large tongue-and-groove joint in the center. The latter has a shape that maximizes contact surface area between teeth as they rotate away from each other during drilling. Articulating joints have not been described in Neogastropod radula previously, but they are consistent with an earlier hypothesis that impact forces on individual teeth during predatory drilling are dispersed by tooth-tooth interactions.

Orchids reduce attachment of herbivorous snails with leaf trichomes

Protective structures in the epidermis are essential for land plants to defend themselves against herbivores. In this study, we investigated the effect of different types of trichomes of three orchids, Calanthe triplicata, Dendrochilum pallidiflavens and Trichotosia ferox, on attachment of herbivorous land snails, using histochemistry and centrifuge experiments. Size, ornamentation and histochemistry of epicuticular trichomes on the orchid leaves were assessed with light microscopy, scanning electron microscopy and transmission electron microscopy. Total forces needed to detach two differently shaped snail species, Subulina octona and Pleurodonte isabella, were measured using a turntable equipped with a synchronized strobe. Snails were placed in two positions, either perpendicular or parallel to the main veins on the orchid leaves, both on the adaxial (= upper) or abaxial (= lower) side. The results obtained provided three new insights. First, a perpendicular or parallel position of the snails to the main veins did not significantly affect the attachment performance of either species tested. Secondly, snails detached significantly easier on leaf sides covered with a high density of lignin filled epicuticular trichomes. Thirdly, the removal of glandular trichomes did not affect the attachment forces; however, the absence of lignified trichomes increased the attachment of the snails. Our study highlights the importance of studying micro-ornamentation in combination with performance for obtaining a better understanding of the defense mechanisms employed by different species of orchids to deter herbivorous snails.

Coping with abrasive food: diverging composition of radular teeth in two Porifera-consuming nudibranch species (Mollusca, Gastropoda)

Molluscs forage with their radula, a chitinous membrane with teeth. Adaptations to hard or abrasive ingesta were well studied in Polyplacophora and Patellogastropoda, but for other taxa there are large gaps in knowledge. Here, we investigated the nudibranch gastropods Felimare picta and Doris pseudoargus, both of which feed on Porifera. Tooth morphologies were documented by scanning electron microscopy, and mechanical properties were tested by nanoindentation. We found that these parameters are rather similar in both species, indicating that teeth are similar in their function. To study the composition, teeth were visualized using confocal laser scanning microscopy (CLSM), to determine the degree of tanning, and analysed with energy-dispersive X-ray spectroscopy, to test the elemental composition. The emitted autofluorescence signal and the inorganic content differed between the species. This was especially prominent when studying the inner and outer tooth surfaces (leading and trailing edges). In F. picta, we detected high proportions of Si, whereas teeth of D. pseudoargus contained high amounts of Ca, which influenced the autofluorescence signal in CLSM. Employing nanoindentation, we determined high Young's modulus and hardness values for the leading edges of teeth, which relate to the Si and Ca content. This highlights that teeth with a similar morphology and mechanical properties can be mechanically enhanced via different chemical pathways in Nudibranchia.

The ontogeny of elements: distinct ontogenetic patterns in the radular tooth mineralization of gastropods

The molluscan phylum is characterized by the radula, used for the gathering and processing of food. This structure can consist of a chitinous membrane with embedded rows of teeth, which show structural, chemical, and biomechanical adaptations to the preferred ingesta. With regard to the chemical composition of teeth, some taxa (Polyplacophora and Patellogastropoda) were extensively studied, and high proportions of incorporated iron, calcium, and silicon were previously reported. However, outside these two groups, there is an immense lack of knowledge about the elemental composition of radular teeth. The here presented work aims at shedding some light on the radular composition by performing energy-dispersive X-ray spectroscopy (EDX) on six non-patelliform gastropod species (Anentome helena, Cornu aspersum, Lavigeria nassa, Littorina littorea, Reymondia horei, and Vittina turrita), with the focus on the ontogeny of the elemental composition. Proportions of elements, which are not part of chitin and other purely organic molecules, were documented for overall 1027 individual teeth of all ontogenetic radular stages, i.e., for the building zone, the maturation zone, and the working zone. We detected that the proportions of these elements increased from the building to the maturation zone. However, from the maturation to the working zone, two general trends are visible: either the proportions of the elements increased or decreased. The latter trend could potentially be explained by the acidic pH of the gastropod saliva, which awaits further investigations.

Micro-cracks and micro-fractures reveal radular tooth architecture and its functional significance in the paludomid gastropod Lavigeria grandis

Most molluscan taxa forage with their radula, a chitinous membrane with embedded teeth. The teeth are the actual interfaces between the animal and its ingesta and serve as load-transmitting regions. During foraging, these structures have to withstand high stresses without structural failure and without a high degree of wear. Mechanisms contributing to this failure- and wear-resistance were well studied in the heavily mineralized teeth of Polyplacophora and Patellogastropoda, but for the rather chitinous teeth of non-limpet snails, we are confronted with a large gap in data. The work presented here on the paludomid gastropod Lavigeria grandis aims to shed some light on radular tooth composition and its contribution to failure- and wear-prevention in this type of radula. The teeth were fractured and the micro-cracks studied in detail by scanning electron microscopy, revealing layers within the teeth. Two layers of distinct fibre densities and orientations were detected, covered by a thin layer containing high proportions of calcium and silicon, as determined by elemental dispersive X-ray spectroscopy. Our results clearly demonstrate the presence of failure- and wear-prevention mechanisms in snail radulae without the involvement of heavy mineralization-rendering this an example of a highly functional biological lightweight structure. This article is part of the theme issue 'Nanocracks in nature and industry'.

Elemental analyses reveal distinct mineralization patterns in radular teeth of various molluscan taxa

The molluscan phylum is the second specious animal group with its taxa feeding on a variety of food sources. This is enabled by the radula, a chitinous membrane with embedded teeth, one important autapomorphy. Between species, radulae can vary in their morphology, mechanical, and chemical properties. With regard to chemical composition, some taxa (Polyplacophora and Patellogastropoda) were studied extensively in the past decades, due to their specificity to incorporate high proportions of iron, calcium, and silicon. There is, however, a huge lack of knowledge about radular composition in other taxa. The work presented aims at shedding light on the chemistry by performing energy-dispersive X-ray spectroscopy analyses on 24 molluscan species, thereof two Polyplacophora, two Cephalopoda, and 20 Gastropoda, which was never done before in such a comprehensiveness. The elements and their proportions were documented for 1448 individual, mature teeth and hypotheses about potential biomineralization types were proposed. The presented work additionally comprises a detailed record on past studies about the chemical composition of molluscan teeth, which is an important basis for further investigation of the radular chemistry. The found disparity in elements detected, in their distribution and proportions highlights the diversity of evolutionary solutions, as it depicts multiple biomineralization types present within Mollusca.

Collective effect of damage prevention in taenioglossan radular teeth is related to the ecological niche in Paludomidae (Gastropoda: Cerithioidea)

The molluscan radula, a thin membrane with embedded rows of teeth, is the structure for food processing and gathering. For proper functioning, radular failures must be either avoided or reduced when interacting with the preferred food, as this might be of high significance for the individual fitness. Thus, the analysis of structural failure in radular teeth could be included in studies on trophic specializations. Here, we tested the failure of non-mineralized, chitinous radular teeth from taxa, belonging to an African paludomid species flock from Lake Tanganyika and surrounding river systems. These species are of high interest for evolutionary biologists since they represent a potential result of an adaptive radiation including trophic specialisations to distinct substrates, the food is attached to. In a biomechanical experiment a shear load was applied to tooth cusps with a force transducer connected to a motorized stage until structural failure occurred. Subsequently broken areas were measured and breaking stress was calculated. As the experiments were carried out under dry and wet conditions, the high influence of the water content on the forces, teeth were capable to resist, could be documented. Wet teeth were able to resist higher forces, because of their increased flexibility and the flexibility of the embedding membrane, which enabled them either to slip away or to gain support from adjacent teeth. This mechanism can be understood as collective effect reducing structural failure without the mineralisation with wear-minimizing elements, as described for Polyplacophora and Patellogastropoda. Since the documented mechanical behaviour of radular teeth and the maximal forces, teeth resist, can directly be related to the gastropod ecological niche, both are here identified as an adaptation to preferred feeding substrates. STATEMENT OF SIGNIFICANCE: The radula, a chitinous membrane with teeth, is the molluscan feeding structure. Here we add onto existing knowledge about the relationship between tooth's mechanical properties and species' ecology by determining the tooth failure resistance. Six paludomid species (Gastropoda) of a prominent species flock from Lake Tanganyika, foraging on distinct feeding substrates, were tested. With a force transducer wet and dry teeth were broken, revealing the high influence of water content on mechanical behaviour and force resistance of teeth. Higher forces were needed to break wet radulae due to an increased flexibility of teeth and membrane, which resulted in an interlocking or twisting of teeth. Mechanical behaviour and force resistance were both identified as trophic adaptations to feeding substrate.

From the knitting shop: the first physical and dynamic model of the taenioglossan radula (Mollusca: Gastropoda) aids in unravelling functional principles of the radular morphology

The radula is the structure used for food processing in Mollusca. It can consist of a membrane with stiffer teeth, which is, together with alary processus, muscles and odontophoral cartilages, part of the buccal mass. In malacology, it is common practice to infer potential tooth functions from morphology. Thus, past approaches to explain functional principles are mainly hypothesis driven. Therefore, there is an urgent need for a workflow testing hypotheses on the function of teeth and buccal mass components and interaction of structures, which can contribute to understanding the structure as a whole. Here, in a non-conventional approach, we introduce a physical and dynamic radular model, based on morphological data of Spekia zonata (Gastropoda, Paludomidae). Structures were documented, computer-modelled, three-dimensional-printed and assembled to gather a simplistic but realistic physical and dynamic radular model. Such a bioinspired design enabled studying of radular kinematics and interaction of parts when underlain supporting structures were manipulated in a similar manner as could result from muscle contractions. The presented work is a first step to provide a constructional manual, paving the way for even more realistic physical radular models, which could be used for understanding radular functional morphology and for the development of novel gripping devices.

Listening to Slugs: Acceptability and Consumption of Molluscicide Pellets by the Grey Field Slug, Deroceras reticulatum

Gastropod damage to crop plants has a significant economic impact on agricultural and horticultural industries worldwide, with the Grey Field Slug (Deroceras reticulatum (Müller)) considered the main mollusc pest in the United Kingdom and in many other temperate areas. The prevailing form of crop protection is pellets containing the active ingredient, metaldehyde. Metaldehyde can cause paralysis and death in the mollusc, depending on the amount ingested. The paralysing effects may result in reduced pellet consumption. A greater understanding of metaldehyde consumption may reveal an area that can be manipulated using novel molluscicide formulations. Novel pellet types included commercial metaldehyde pellets coated so that metaldehyde is released more slowly. In both laboratory and arena trials, an audio sensor was used to record individual slugs feeding on a variety of pellet types, including commercially available toxic pellets (metaldehyde and ferric phosphate) and novel metaldehyde formulations. The sensor was used to record the length of each bite and the total number of bites. There was no significant difference in the length of bites between pellet types in laboratory trials. Novel pellets were not consumed more than commercial pellet types. Commercial pellet types did not differ in consumption.

Radular force performance of stylommatophoran gastropods (Mollusca) with distinct body masses

The forces exerted by the animal's food processing structures can be important parameters when studying trophic specializations to specific food spectra. Even though molluscs represent the second largest animal phylum, exhibiting an incredible biodiversity accompanied by the establishment of distinct ecological niches including the foraging on a variety of ingesta types, only few studies focused on the biomechanical performance of their feeding organs. To lay a keystone for future research in this direction, we investigated the in vivo forces exerted by the molluscan food gathering and processing structure, the radula, for five stylommatophoran species (Gastropoda). The chosen species and individuals have a similar radular morphology and motion, but as they represent different body mass classes, we were enabled to relate the forces to body mass. Radular forces were measured along two axes using force transducers which allowed us to correlate forces with the distinct phases of radular motion. A radular force quotient, AFQ = mean Absolute Force/bodymass^0.67, of 4.3 could be determined which can be used further for the prediction of forces generated in Gastropoda. Additionally, some specimens were dissected and the radular musculature mass as well as the radular mass and dimensions were documented. Our results depict the positive correlation between body mass, radular musculature mass, and exerted force. Additionally, it was clearly observed that the radular motion phases, exerting the highest forces during feeding, changed with regard to the ingesta size: all smaller gastropods rather approached the food by a horizontal, sawing-like radular motion leading to the consumption of rather small food particles, whereas larger gastropods rather pulled the ingesta in vertical direction by radula and jaw resulting in the tearing of larger pieces.

Influence of water content on mechanical behaviour of gastropod taenioglossan radulae

One molluscan autapomorphy is the radula, the organ used for feeding. Here, for the first time, the performance and failure of taenioglossan radular teeth were tested in a biomechanical experiment which in turn allowed building hypotheses about tooth functionalities. Shear load was applied to tooth cusps with a force transducer until structural failure occurred, the broken area was measured, and finally breaking stress was calculated. These experiments were carried out under dry and wet conditions. Our results show that certain tooth types can resist higher stresses and are rather specialised to loosen food items from a surface, whereas other teeth can only gather food particles. The experiments additionally illustrate the high influence of the water content on the resulting breaking stress. When wet teeth were tested, their ductility and ability to avoid being fractured by an obstacle increased. Their flexibility also allowed them support from teeth of adjacent tooth rows, which made the whole system less prone to failure. Our results were compared with the previous data on the mechanical properties and feeding simulations. This study provides a keystone for further comparative studies aiming at connecting diversity of radulae with their possible adaptations to the ingesta.

Trophic specialisation reflected by radular tooth material properties in an "ancient" Lake Tanganyikan gastropod species flock

Background

Lake Tanganyika belongs to the East African Great Lakes and is well known for harbouring a high proportion of endemic and morphologically distinct genera, in cichlids but also in paludomid gastropods. With about 50 species these snails form a flock of high interest because of its diversity, the question of its origin and the evolutionary processes that might have resulted in its elevated amount of taxa. While earlier debates centred on these paludomids to be a result of an intralacustrine adaptive radiation, there are strong indications for the existence of several lineages before the lake formation. To evaluate hypotheses on the evolution and radiation the detection of actual adaptations is however crucial. Since the Tanganyikan gastropods show distinct radular tooth morphologies hypotheses about potential trophic specializations are at hand.

Results

Here, based on a phylogenetic tree of the paludomid species from Lake Tanganyika and adjacent river systems, the mechanical properties of their teeth were evaluated by nanoindentation, a method measuring the hardness and elasticity of a structure, and related with the gastropods’ specific feeding substrate (soft, solid, mixed). Results identify mechanical adaptations in the tooth cusps to the substrate and, with reference to the tooth morphology, assign distinct functions (scratching or gathering) to tooth types. Analysing pure tooth morphology does not consistently reflect ecological specializations, but the mechanical properties allow the determination of eco-morphotypes.

Conclusion

In almost every lineage we discovered adaptations to different substrates, leading to the hypothesis that one main engine of the flock’s evolution is trophic specialization, establishing distinct ecological niches and allowing the coexistence of taxa.

An Anticipatory Circuit Modification That Modifies Subsequent Task Switching

Modulators are generally expected to establish a network configuration that is appropriate for the current circumstances. We characterize a situation where the opposite is apparently observed. A network effect of a peptide modulator is counterproductive in that it tends to impede rather than promote the creation of the configuration that is appropriate when the modulator is released. This raises a question: why does release occur? We present data that strongly suggest that it impacts task switching. Our experiments were conducted in an Aplysia feeding network that generates egestive and ingestive motor programs. Initial experiments focused on egestive activity and the neuron B8. As activity becomes egestive, there is an increase in synaptic drive to B8 and its firing frequency increases (Wang et al., 2019). We show that, as this occurs, there is also a persistent current that develops in B8 that is outward rather than inward. Dynamic clamp introduction of this current decreases excitability. When there is an egestive-ingestive task switch in Aplysia, negative biasing is observed (i.e., a bout of egestive activity has a negative impact on a subsequent attempt to initiate an ingestive response) (Proekt et al., 2004). Using an in vitro analog of negative biasing, we demonstrate that the outward current that develops during egestive priming plays an important role in establishing this phenomenon. Our data suggest that, although the outward current induced as activity becomes egestive is counterproductive at the time, it plays an anticipatory role in that it subsequently impacts task switching.SIGNIFICANCE STATEMENT In this study, we identify a peptide-induced circuit modification (induction of an outward current) that does not immediately promote the establishment of a behaviorally appropriate network configuration. We ask why this might occur, and present data that strongly suggest that it plays an important role during task switching. Specifically, our data suggest that the outward current we characterize plays a role in the negative biasing that is seen in the mollusc Aplysia when there is a transition from egestive to ingestive activity. It is possible that the mechanism that we describe operates in other species. A negative effect of egestion on subsequent ingestion is observed throughout the animal kingdom.

Not just scratching the surface: distinct radular motion patterns in Mollusca

The radula is the organ for mechanical food processing and an important autapomorphy of Mollusca. Its chitinous membrane, embedding small radular teeth, is moved by the set of muscles resulting in an interaction with the ingesta, tearing it and collecting loosened particles. Radulae and their teeth can be quite distinct in their morphology and had been of high research interest, but only a few studies have examined the basic functional principles of this organ, the movement and motion during feeding action. Here, the radular motion of 20 representative species, belonging to four major gastropod lineages (Vetigastropoda, Neritimorpha, Caenogastropoda and Heterobranchia) and Polyplacophora, were recorded and classified. Comparisons of the video footage with the scanning electron microscope (SEM) images of the radula resulted in the recognition of functional tooth rows and the correct position of the teeth during feeding. We identified six different types of radular movements, including rotations and bending of the radula itself. In each movement type, different structures act as counter bearings enabling the animals to grab and tear food.

Finite element analysis of individual taenioglossan radular teeth (Mollusca)

Molluscs are a highly successful group of invertebrates characterised by a specialised feeding organ called the radula. The diversity of this structure is associated with distinct feeding strategies and ecological niches. However, the precise function of the radula (each tooth type and their arrangement) remains poorly understood. Here for the first time, we use a quantitative approach, Finite-Element-Analysis (FEA), to test hypotheses regarding the function of particular taenioglossan tooth types. Taenioglossan radulae are of special interest, because they are comprised of multiple teeth that are regionally distinct in their morphology. For this study we choose the freshwater gastropod species Spekia zonata, endemic to Lake Tanganyika, inhabiting and feeding on algae attached to rocks. As a member of the African paludomid species flock, the enigmatic origin and evolutionary relationships of this species has received much attention. Its chitinous radula comprises several tooth types with distinctly different shapes. We characterise the tooth's position, material properties and attachment to the radular membrane and use this data to evaluate 18 possible FEA scenarios differing in the above parameters. Our estimations of stress and strain indicate different functional loads for different teeth. We posit that the central and lateral teeth are best suitable for scratching substrate loosening ingesta, whereas the marginals are best suited for gathering food particles. Our successful approach and workflow are readily applicable to other mollusc species.

On Helix grisea Linnaeus, 1758 and the Helix species described by Carl Linnaeus and Otto Friedrich Müller

Helix grisea was described by Linnaeus in 1758, and its identity has been doubtful ever since. The name features in the early taxonomic history of some other species of Helix sensu lato. Here I provide a summary of the history of its use. Mostly, the name was applied for the widespread species now accepted as Cornu aspersum (O. F. Müller, 1774), while a few authors used it for Helix cincta O. F. Müller, 1774. Neither usage is in line with the Linnaeus' account. Based on a figure to which Linnaeus referred, I propose that the name originally applied to a species now known as Helix lucorum Linnaeus, 1758 and as the first reviser, I give precedence to H. lucorum over H. grisea. In respect to C. aspersum, H. grisea cannot take precedence because of reversal of precedence according to Art. 23.9, and is pronounced a nomen oblitum. The case of H. grisea illustrates the importance of Müller's work for the taxonomy of the genus. In this respect it is regrettable that some of his species, including C. aspersum, lack a known and well documented type specimens.