Periodontal regeneration using bone morphogenetic protein 2 incorporated biomimetic calcium phosphate in conjunction with barrier membrane: A pre-clinical study in dogs

Progress in Basic Research and Clinical Strategies for Cementum Regeneration

Periodontitis is a chronic inflammatory disease that inflicts damage to periodontal tissues, leading to loss of teeth, and affects systemic health. Traditional treatments can delay inflammation, whereas regeneration of the periodontal complex (periodontal ligament, cementum, and alveolar bone) can better restore periodontal tissue function. In recent years, the regeneration of alveolar bone and the periodontal ligament has been widely reviewed although cementum has received less attention. As an avascular mineralised structure around the tooth, cementum can anchor periodontal ligament fibres to the root surface, thereby connecting teeth to alveolar bone. The supporting and stabilizing effects of cementum make its regeneration vital for restoring the functionality of the periodontal tissues. In this review, we discuss advancements in basic and clinical research appertaining to cementum regeneration. We describe the molecular mechanisms that contribute to cementum regeneration thereby providing a foundation for further basic research. Finally we summarise the clinical strategies employed for cementum regeneration, including regenerative surgery and utilisation of growth factors and stem cells.

The Clinical Efficacy and Safety of ErhBMP-2/BioCaP/β-TCP as a Novel Bone Substitute Using the Tooth-Extraction-Socket-Healing Model: A Proof-of-Concept Randomized Controlled Trial

AIM

This first randomized controlled trial in humans aimed to assess the efficacy and safety of low-dosage Escherichia coli-derived recombinant human bone morphogenetic protein 2 (ErhBMP-2)-incorporated biomimetic calcium phosphate coating-functionalized β-TCP (ErhBMP-2/BioCaP/β-TCP) as a novel bone substitute using the tooth-extraction-socket-healing model.

MATERIALS AND METHODS

Forty patients requiring dental implants after single-root tooth extraction were enrolled in this study and randomly assigned into three groups: ErhBMP-2/BioCaP/β-TCP (N = 15), β-TCP (N = 15) and natural healing (N = 10). New bone volume density from histomorphometric analyses was evaluated 6 weeks post-operatively as the primary outcome, and other histomorphometric analyses, alveolar bone and soft-tissue changes were the secondary outcomes. Safety parameters included adverse events, soft-tissue healing, oral health impact profile, serum BMP-2 concentrations and other laboratory tests.

RESULTS

The findings revealed a significant increase in new bone volume density in patients treated with ErhBMP-2/BioCaP/β-TCP compared to those receiving β-TCP alone. The required bone augmentation procedures during implant placement surgery in the ErhBMP-2/BioCaP/β-TCP group were significantly less than in the natural healing group. There were no significant differences in safety parameters among the three groups.

CONCLUSION

This clinical trial primarily proved the safety and efficacy of ErhBMP-2/BioCaP/β-TCP as a promising bone substitute.

Cementum attachment protein-derived peptide induces cementum formation

A pentapeptide AVIFM (CAP-p5) derived from the carboxy-terminus end of cementum attachment protein was examined for its role on proliferation, differentiation, and mineralization of human periodontal ligament cells (HPLC), and for its potential to induce cementum deposition in vivo. CAP-p5 capability to induce hydroxyapatite crystal formation on demineralized dentin blocks was characterized by scanning electron microscopy, μRAMAN, and high-resolution transmission electron microscopy. The results revealed that CAP-p5 promoted cell proliferation and cell differentiation and increases alkaline phosphatase activity of HPLC and mineralization at an optimal concentration of 10 μg/mL. It induced the expression of cementum molecular markers BSP, CAP, CEMP1, and ALP at the protein level. In a cell-free system, human demineralized dentin blocks coated with CAP-p5 induced the deposition of a homogeneous and continuous mineralized layer, intimately integrated with the underlying dentin indicating new cementum formation. Physicochemical characterization of this mineral layer showed that it is composed of hydroxyapatite crystals. Demineralized dentin blocks coated with CAP-p5 implanted subcutaneously in BALB/cAnNCrl were analyzed histologically; the results disclosed that CAP-p5 could induce the deposition of a cementum layer intimately integrated with the subjacent dentin with cementocytes embedded into the cementum matrix. Immunostaining showed the expression of cementum molecular markers; v.gr. BSP, CAP, CEMP1 and ALP, validating the molecular identity of the newly deposited cementum. We conclude that CAP-p5 is a new biomolecule with the potential of therapeutic application to contribute to the regeneration of cementum and periodontal structures lost in periodontal disease.

The activin/BMP-2 chimera AB204 promotes periodontal tissue regeneration in a buccal dehiscence model: a pilot study

PURPOSE

A combination of activin and bone morphogenetic protein-2 (BMP-2), termed AB204, has been shown to improve osteogenic potential with fewer side effects than BMP-2 alone. This study was performed to evaluate the effect of AB204 on periodontal tissue regeneration in a dog buccal dehiscence model.

METHODS

Buccal dehiscence defects were created on the maxillary premolars (P1, P2, and P3) of 6 mongrel dogs. After 5 weeks, the dogs were randomly assigned to 1 of 3 groups: the control, collagen matrix (CM), and CM/AB204 groups. Grafting procedures were then performed. The dogs were sacrificed 8 weeks after the grafting procedure, and volumetric and histological analyses were conducted.

RESULTS

The thickness of the buccal gingiva in the CM/AB204 group was greater than those in the other groups at 2 weeks (P<0.05). The ridge width in the AB204/CM group exceeded the width in the other groups at 4 and 8 weeks; however, the difference was not statistically significant. Histological analysis revealed that the CM/AB204 group demonstrated the formation of new bone surrounded by newly formed periodontal ligament and cementum (P=0.035).

CONCLUSIONS

The combined application of CM and AB204 shows promise in facilitating the regeneration of periodontal attachment, including the formation of new bone, cementum, and periodontal ligament.

Assessment and comparative study of diosgenin doses in alleviating experimental periodontitis

BACKGROUND

This study was performed to determine the therapeutic effects of diosgenin (DG) which is a steroidal saponin, administered at different doses on alveolar bone loss (ABL) in rats with experimental periodontitis using immunohistochemical and cone-beam computed tomography (CBCT).

METHODS

Thirty-two male Wistar rats divided into four equal groups: control (non-ligated), periodontitis (P), DG-48, and DG-96. Sutures were placed at the gingival margin of the lower first molars to induce experimental periodontitis. Then, 48 and 96 mg/kg of DG was administered to the study groups by oral gavage for 29 days. At day 30, the animals were sacrificed and ABL was determined via CBCT. The expression patterns of osteocalcin (OCN), alkaline phosphatase (ALP), type I collagen (Col-1), B cell lymphoma 2 (Bcl 2), Bcl 2-associated X protein (Bax), bone morphogenetic protein 2 (BMP-2), and receptor activator of NF κB ligand (RANKL) were examined immunohistochemically.

RESULTS

Histopathologic examination showed all features of the advanced lesion in the P group. DG use decreased all these pathologic changes. It was observed that periodontitis pathology decreased as the dose increased. DG treatment increased the ALP, OCN, Bcl 2, Col-1, and BMP-2 levels in a dose-dependent manner, compared with the P group (p < 0.05). DG decreased the expression of RANKL and Bax in a dose-dependent manner (p < 0.05). ABL was significantly lower in the DG-48 and DG-96 groups than in the P group (p < 0.05).

CONCLUSION

Collectively, our findings suggest that DG administration protects rats from periodontal tissue damage with a dose-dependent manner, provides an increase in markers of bone formation, decreases in Bax/Bcl-2 ratio and osteoclast activation.

Enhanced immunomodulation and periodontal regeneration efficacy of subgingivally delivered progranulin-loaded hydrogel as an adjunct to non-surgical treatment for Class II furcation involvement in dogs

AIM

To evaluate the effect of subgingival delivery of progranulin (PGRN)/gelatin methacryloyl (GelMA) complex as an adjunct to scaling and root planing (SRP) on an experimental periodontitis dog model with Class II furcation involvement (FI).

MATERIALS AND METHODS

A Class II FI model was established, and the defects were divided into four treatment groups: (a) no treatment (control); (b) SRP; (c) SRP + GelMA; (d) SRP + PGRN/GelMA. Eight weeks after treatment, periodontal parameters were recorded, gingival crevicular fluid and gingival tissue were collected for ELISA and RT-qPCR, respectively, and mandibular tissue blocks were collected for micro computed tomography (micro-CT) scanning and hematoxylin and eosin (H&E) staining.

RESULTS

The SRP + PGRN/GelMA group showed significant improvement in all periodontal parameters compared with those in the other groups. The expression of markers related to M1 macrophage and Th17 cell significantly decreased, and the expression of markers related to M2 macrophage and Treg cell significantly increased in the SRP + PGRN/GelMA group compared with those in the other groups. The volume, quality and area of new bone and the length of new cementum in the root furcation defects of the PGRN/GelMA group were significantly increased compared to those in the other groups.

CONCLUSIONS

Subgingival delivery of the PGRN/GelMA complex could be a promising non-surgical adjunctive therapy for anti-inflammation, immunomodulation and periodontal regeneration.

Tissue Regeneration on Rise: Dental Hard Tissue Regeneration and Challenges-A Narrative Review

Background

As people live longer, there is an increasing need for hard tissue regeneration and whole-tooth regeneration. Despite the advancements in the field of medicine, the field of regenerative dentistry is still challenging due to the complexity of dental hard tissues. Cross-disciplinary collaboration among material scientists, cellular biologists, and odontologists aimed at developing strategies and uncovering solutions related to dental tissue regeneration. Methodology. A search of the literature was done for pertinent research. Consistent with the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) 2020 Statement, the electronic databases looked at were PubMed, Science Direct, Scopus, and Google Scholar, with the keyword search "hard dental tissue regeneration."

Results

Database analysis yielded a total of 476 articles. 222 duplicate articles have been removed in total. Articles that have no connection to the directed regeneration of hard dental tissue were disregarded. The review concluded with the inclusion of four studies that were relevant to our research objective.

Conclusion

Current molecular signaling network investigations and novel viewpoints on cellular heterogeneity have made advancements in understanding of the kinetics of dental hard tissue regeneration possible. Here, we outline the fundamentals of stem hard dental tissue maintenance, regeneration, and repair, as well as recent advancements in the field of hard tissue regeneration. These intriguing findings help establish a framework that will eventually enable basic research findings to be utilized towards oral health-improving medicines.

Dentinomimetics and cementomimetics of Moringa oleifera leaves extract

To evaluate the biomimetic remineralization capabilities of Moringa oleifera leaves (MOL) extract on coronal dentin and acellular cementum, two different concentrations (50 and 200 mg/ml) of MOL extract loaded in plain varnish (M1 and M2 groups respectively) were compared to fluoride varnish (FL group) and native surface (C group). Eighty sound premolar teeth were collected. Forty teeth (10 teeth in each group) were used for coronal dentin testing while the other forty (10 teeth in each group) were used for acellular cementum testing. Teeth in M1, M2, and FL groups were etched for 30 s and then received the specific varnish treatment. All samples were immersed in artificial saliva for 14 days and then collected, dried, and examined by scanning electron microscopy and energy dispersive X-ray spectroscopy (EDX). Histologically, FL group showed mineral deposition as discrete vesicular granules of various sizes on the surface of both coronal dentin and acellular cementum. Mineral deposition only occurred on some DTs openings while opened tubules remained. The surface of the acellular cementum revealed regular grooves, micro-fissures, and cracks. In the M1 and M2 groups, mineral deposition appeared as a homogenous continuous layer on coronal dentin and acellular cementum. Only a few DTs and cementum fissures were not filled completely. In L.S. sections of the coronal one-third, the DTs appeared almost sealed with varying lengths of mineral deposition. EDX results statistical analysis showed that the M2 group had the highest phosphate ions (P-) and calcium ions (Ca+2) at%. MOL has an extraordinary effect on the remineralization of coronal dentin and acellular cementum. It would have a promising ability to control dentinal hypersensitivity and formation of biomimetic cementum tissue.

Animal models for testing biomaterials in periodontal regeneration

Periodontitis is a prevalent oral disease. It can cause tooth loss and has a significant impact on patients' quality of life. While existing treatments can only slow the progression of periodontitis, they are unable to achieve complete regeneration and functional reconstruction of periodontal tissues. As a result, regenerative therapies based on biomaterials have become a focal point of research in the field of periodontology. Despite numerous studies reporting the superiority of new materials in periodontal regeneration, limited progress has been made in translating these findings into clinical practice. This may be due to the lack of appropriate animal models to simulate the tissue defects caused by human periodontitis. This review aims to provide an overview of established animal models for periodontal regeneration, examine their advantages and limitations, and outline the steps for model construction. The objective is to determine the most relevant animal models for periodontal regeneration based on the hypothesis and expected outcomes.

Biomimicry and 3D-Printing of Mussel Adhesive Proteins for Regeneration of the Periodontium-A Review

Innovation in the healthcare profession to solve complex human problems has always been emulated and based on solutions proven by nature. The conception of different biomimetic materials has allowed for extensive research that spans several fields, including biomechanics, material sciences, and microbiology. Due to the atypical characteristics of these biomaterials, dentistry can benefit from these applications in tissue engineering, regeneration, and replacement. This review highlights an overview of the application of different biomimetic biomaterials in dentistry and discusses the key biomaterials (hydroxyapatite, collagen, polymers) and biomimetic approaches (3D scaffolds, guided bone and tissue regeneration, bioadhesive gels) that have been researched to treat periodontal and peri-implant diseases in both natural dentition and dental implants. Following this, we focus on the recent novel application of mussel adhesive proteins (MAPs) and their appealing adhesive properties, in addition to their key chemical and structural properties that relate to the engineering, regeneration, and replacement of important anatomical structures in the periodontium, such as the periodontal ligament (PDL). We also outline the potential challenges in employing MAPs as a biomimetic biomaterial in dentistry based on the current evidence in the literature. This provides insight into the possible increased functional longevity of natural dentition that can be translated to implant dentistry in the near future. These strategies, paired with 3D printing and its clinical application in natural dentition and implant dentistry, develop the potential of a biomimetic approach to overcoming clinical problems in dentistry.

Biomimetic calcium phosphate coating on medical grade stainless steel improves surface properties and serves as a drug carrier for orthodontic applications

OBJECTIVE

Recently, stainless steel (SSL) miniscrew implants have been used in orthodontic clinics as temporary anchorage devices. Although they have excellent physical properties, their biocompatibility is relatively poor. Previously, our group developed a two-phase biomimetic calcium phosphate (BioCaP) coating that can significantly improve the biocompatibility of medical devices. This study aimed to improve the biocompatibility of SSL by coating SSL surface with the BioCaP coating.

METHODS

Titanium (Ti) discs and SSL discs (diameter: 5 mm, thickness: 1 mm) were used in this study. To form an amorphous layer, the Ti discs were immersed in a biomimetic modified Tyrode solution (BMT) for 24 h. The SSL discs were immersed in the same solution for 0 h, 12 h, 24 h, 36 h and 48 h. To form a crystalline layer, the discs were then immersed in a supersaturated calcium phosphate solution (CPS) for 48 h. The surface properties of the BioCaP coatings were analysed. In addition, bovine serum albumin (BSA) was incorporated into the crystalline layer during biomimetic mineralisation as a model protein.

RESULTS

The morphology, chemical composition and drug loading capacity of the BioCaP coating on smooth SSL were confirmed. This coating improved roughness and wettability of SSL surface. In vitro, with the extension of BMT coating period, the cell seeding efficiency, cell spreading area and cell proliferation on the BioCaP coating were increased.

SIGNIFICANCE

These in vitro results show that the BioCaP coating can improve surface properties of smooth medical grade SSL and serve as a carrier system for bioactive agents.

Icariin Has a Synergistic Effect on the Osteoinductivity of Bone Morphogenetic Protein 2 at Ectopic Sites

OBJECTIVE

Establishing biocompatible, biodegradable, osteoconductive, and osteoinductive bone materials remains a challenging subject in the research of bone healing and bone regeneration. Previously, we demonstrated the osteogenic and osteoconductive effects of biomimetic calcium phosphate (BioCaP) incorporating with Icariin and/or bone morphogenetic protein 2 (BMP-2) at orthotopic sites.

METHODS

By implanting the BioCaP granules incorporated Icariin and/or BMP-2 into the dorsal subcutaneous pockets of adult male Sprague-Dawley (S-D) rats (6-7 weeks old), we investigated the osteoinductive efficacy of the samples. Micro-computed tomography(micro-CT) observations and histological slices were used to verify the osteoinduction of this system on the 2^nd and 5^th week. Statistical significances was evaluated using Turkey's post hoc test of one-way analysis of variance.

RESULTS

The osteoinduction of the BioCaP incorporated with BMP-2 or both agents was confirmed as expected. BioCaP with Icariin alone could not generate bone formation at an ectopic sites. Nevertheless, co-administration of Icariin increased bone mineral density (BMD; p < 0.01) (628mg HA/cm³ vs 570mg HA/cm³ ) and completely changed the distribution of newly formed bone when compared with the granules with BMP-2 alone, even though there was no significant difference in the volume of newly formed bone. In contrast, the BioCaP with both agents (37.86%) had significantly fewer remaining materials than the other groups by the end of the fifth week (53.22%, 53.62% and 48.22%) (p < 0.01).

CONCLUSION

The co-administration of Icariin and BMP-2 increased BMD changed the distribution of newly formed bone, and reduced the amount of remaining materials. Therefore, Icariin can stimulate BMP-2 when incorporated into BioCaP granules at ectopic sites, which makes it useful for bone tissue engineering.

Macrophage Polarization Related to Biomimetic Calcium Phosphate Coatings: A Preliminary Study

Biomimetic calcium phosphate (BioCaP) coatings were used to deliver bone morphogenetic protein 2 (BMP2), and enhance osteogenesis. However, the mechanism for BioCaP coatings interacting with the immune response during bone regeneration remains unclear. In this preliminary study, the effect of BioCaP coatings on macrophage polarization without (BioCaP group) or with BMP2 (BioCaP+Inc.BMP2 group) was investigated. RAW 264.7 cells were cultured on the rough and platelike surfaces of coatings in BioCaP and BioCaP+Inc.BMP2 groups, while cultured on smooth surfaces in the group without material for 5 days. The BioCaP coatings per se modulated the switch of M1 to M2 phenotype from day 3, which promoted the expressions of Arg1 and CD 206 but reduced the expression of TNF-α compared with No material group. To detect the microenvironmental changes, the concentrations of calcium ion (Ca²⁺) and inorganic phosphate (Pi), pH values, as well as calcium phosphate crystal pattern were examined. The trends of ionic environmental changes were closely related with macrophage phenotype switch. These results suggest that BioCaP coating itself may affect the macrophage polarization through surface topography, surrounding ionic environment and calcium phosphate crystal pattern.

Carrier systems for bone morphogenetic proteins: An overview of biomaterials used for dentoalveolar and maxillofacial bone regeneration

Different types of biomaterials have been used to fabricate carriers to deliver bone morphogenetic proteins (BMPs) in both dentoalveolar and maxillofacial bone regeneration procedures. Despite that absorbable collagen sponge (ACS) is considered the gold standard for BMP delivery, there is still some concerns regarding its use mainly due to its poor mechanical properties. To overcome this, novel systems are being developed, however, due to the wide variety of biomaterial combination, the heterogeneous assessment of newly formed tissue, and the intended clinical applications, there is still no consensus regarding which is more efficient in a particular clinical scenario. The combination of two or more biomaterials in different topological configurations has allowed specific controlled-release patterns for BMPs, improving their biological and mechanical properties compared with classical single-material carriers. However, more basic research is needed. Since the BMPs can be used in multiple clinical scenarios having different biological and mechanical needs, novel carriers should be developed in a context-specific manner. Thus, the purpose of this review is to gather current knowledge about biomaterials used to fabricate delivery systems for BMPs in both dentoalveolar and maxillofacial contexts. Aspects related with the biological, physical and mechanical characteristics of each biomaterial are also presented and discussed.

•

Strategies for bone formation and regeneration are a major concern in dentistry.

•

Topical delivery of bone morphogenetic proteins (BMPs) allows rapid bone formation.

•

BMPs requires proper carrier system to allow controlled and sustained release.

•

Carrier should also fulfill mechanical requirements of bone defect sites.

•

By using complex composites, it would be possible to develop new carriers for BMPs.

Development, In-Vitro Characterization and In-Vivo Osteoinductive Efficacy of a Novel Biomimetically-Precipitated Nanocrystalline Calcium Phosphate With Internally-Incorporated Bone Morphogenetic Protein-2

The repair of large-volume bone defects (LVBDs) remains a great challenge in the fields of orthopedics and maxillofacial surgery. Most clinically available bone-defect-filling materials lack proper degradability and efficient osteoinductivity. In this study, we synthesized a novel biomimetically-precipitated nanocrystalline calcium phosphate (BpNcCaP) with internally incorporated bone morphogenetic protein-2 (BpNcCaP + BMP-2) with an aim to develop properly degradable and highly osteoinductive granules to repair LVBDs. We first characterized the physicochemical properties of the granules with different incorporation amounts of BMP-2 using scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. We evaluated the cytotoxicity and cytocompatibility of BpNcCaP by assessing the viability and adhesion of MC3T3-E1 pre-osteoblasts using PrestoBlue assay, Rhodamine-Phalloidin and DAPI staining, respectively. We further assessed the in-vivo osteoinductive efficacy in a subcutaneous bone induction model in rats. In-vitro characterization data showed that the BpNcCaP + BMP-2 granules were comprised of hexagonal hydroxyapatite with an average crystallite size ranging from 19.7 to 25.1 nm and a grain size at 84.13 ± 28.46 nm. The vickers hardness of BpNcCaP was 32.50 ± 3.58 HV 0.025. BpNcCaP showed no obvious cytotoxicity and was favorable for the adhesion of pre-osteoblasts. BMP-2 incorporation rate could be as high as 65.04 ± 6.01%. In-vivo histomorphometric analysis showed that the volume of new bone induced by BpNcCaP exhibited a BMP-2 amount-dependent increasing manner. The BpNcCaP+50 μg BMP-2 exhibited significantly more degradation and fewer foreign body giant cells in comparison with BpNcCaP. These data suggested a promising application potential of BpNcCaP + BMP-2 in repairing LVBDs.

Development and regeneration of periodontal supporting tissues

Periodontal tissues, including gingiva, cementum, periodontal ligament, and alveolar bone, play important roles in oral health. Under physiological conditions, periodontal tissues surround and support the teeth, maintaining the stability of the teeth and distributing the chewing forces. However, under pathological conditions, with the actions of various pathogenic factors, the periodontal tissues gradually undergo some irreversible changes, that is, gingival recession, periodontal ligament rupture, periodontal pocket formation, alveolar bone resorption, eventually leading to the loosening and even loss of the teeth. Currently, the regenerations of the periodontal tissues are still challenging. Therefore, it is necessary to study the development of the periodontal tissues, the principles and processes of which can be used to develop new strategies for the regeneration of periodontal tissues. This review summarizes the development of periodontal tissues and current strategies for periodontal healing and regeneration.

Treatment of Naturally Occurring Periodontitis in Dogs With a New Bio-Absorbable Regenerative Matrix

Although periodontal disease is one of the most common (oral) diseases in dogs, an effective treatment approach to periodontitis lacks. The aim of this study was to evaluate the safety and efficacy of a regenerative, bio-absorbable implant biomaterial made of medical-grade porcine gelatin, which is cross-linked by transglutaminase into a porous scaffold for the treatment of periodontitis in dogs in a clinical setting. Nine client-owned dogs were included in this multicenter, prospective interventional clinical study. A split-mouth design was used to treat any teeth with periodontitis; teeth on one side of the mouth were treated with open periodontal therapy alone (control teeth) and teeth on the other side were treated with open periodontal therapy and the tested implant (teeth treated with the implant). A recheck under general anesthesia was performed 3 months after the initial treatment and included periodontal probing, dental radiographs, and/or cone-beam computed tomography (CBCT) of the teeth included in the study. This revealed a reduction of the probing depth (PD) at all teeth, but in teeth treated with the implant, a statistically significant improvement (average 2.0 mm) over control teeth (average 1.0 mm) was diagnosed. Similarly, alveolar bone height was increased at most of the teeth, but in teeth treated with the implant, a statistically significant improvement (average 1.26 mm palatally and 1.51 mm buccally) over control teeth (average 0.58 mm palatally and 0.7 mm buccally) was observed for the buccal site. Open periodontal therapy alone improves clinical parameters and alveolar bone height in dogs with periodontitis, which is further significantly improved by the addition of the implant used.

Autogenous Tooth Bone Grafts for Repair and Regeneration of Maxillofacial Defects: A Narrative Review

Autogenous tooth graft is an innovative and ingenious technique that employs a stepwise approach and utilizes human teeth as an autogenous source of bone graft. The structure of teeth closely resembles bone, both physically and biochemically, and can be efficiently used for the process as it depicts properties of osteoinduction and osteoconduction. Autogenous tooth bone has characteristics similar to bone grafts in terms of healing potential, physical properties, and clinical outcome. Autogenous tooth graft has shown reasonable promise as a graft material for the regeneration of maxillary and mandibular defects. Autogenous tooth bone graft finds its principal application in sinus and ridge augmentations and for socket preservation before implant placement. Additionally, it can be used successfully for alveolar cleft patients and patients with limited periodontal defects. The overall complication rates reported for autogenous tooth grafts are comparable to other graft sources. However, although long-term results are still underway, it is still recommended as a grafting option for limited defects in the cranio-facial region.

Periodontal Wound Healing and Regeneration: Insights for Engineering New Therapeutic Approaches

Periodontitis is a widespread inflammatory disease that leads to loss of the tooth supporting periodontal tissues. The few therapies available to regenerate periodontal tissues have high costs and inherent limitations, inspiring the development of new approaches. Studies have shown that periodontal tissues have an inherent capacity for regeneration, driven by multipotent cells residing in the periodontal ligament (PDL). The purpose of this review is to describe the current understanding of the mechanisms driving periodontal wound healing and regeneration that can inform the development of new treatment approaches. The biologic basis underlying established therapies such as guided tissue regeneration (GTR) and growth factor delivery are reviewed, along with examples of biomaterials that have been engineered to improve the effectiveness of these approaches. Emerging therapies such as those targeting Wnt signaling, periodontal cell delivery or recruitment, and tissue engineered scaffolds are described in the context of periodontal wound healing, using key in vivo studies to illustrate the impact these approaches can have on the formation of new cementum, alveolar bone, and PDL. Finally, design principles for engineering new therapies are suggested which build on current knowledge of periodontal wound healing and regeneration.

Three-dimensional printing of clinical scale and personalized calcium phosphate scaffolds for alveolar bone reconstruction

OBJECTIVE

Alveolar bone defects can be highly variable in their morphology and, as the defect size increases, they become more challenging to treat with currently available therapeutics and biomaterials. This investigation sought to devise a protocol for fabricating customized clinical scale and patient-specific, bioceramic scaffolds for reconstruction of large alveolar bone defects.

METHODS

Two types of calcium phosphate (CaP)-based bioceramic scaffolds (alginate/β-TCP and hydroxyapatite/α-TCP, hereafter referred to as hybrid CaP and Osteoink™, respectively) were designed, 3D printed, and their biocompatibility with alveolar bone marrow stem cells and mechanical properties were determined. Following scaffold optimization, a workflow was developed to use cone beam computed tomographic (CBCT) imaging to design and 3D print, defect-specific bioceramic scaffolds for clinical-scale bone defects.

RESULTS

Osteoink™ scaffolds had the highest compressive strength when compared to hybrid CaP with different infill orientation. In cell culture medium, hybrid CaP degradation resulted in decreased pH (6.3) and toxicity to stem cells; however, OsteoInk™ scaffolds maintained a stable pH (7.2) in culture and passed the ISO standard for cytotoxicity. Finally, a clinically feasible laboratory workflow was developed and evaluated using CBCT imaging to engineer customized and defect-specific CaP scaffolds using OsteoInk™. It was determined that printed scaffolds had a high degree of accuracy to fit the respective clinical defects for which they were designed (0.27 mm morphological deviation of printed scaffolds from digital design).

SIGNIFICANCE

From patient to patient, large alveolar bone defects are difficult to treat due to high variability in their complex morphologies and architecture. Our findings shows that Osteoink™ is a biocompatible material for 3D printing of clinically acceptable, patient-specific scaffolds with precision-fit for use in alveolar bone reconstructive procedures. Collectively, emerging digital technologies including CBCT imaging, 3D surgical planning, and (bio)printing can be integrated to address this unmet clinical challenge.

Effects of low dose doxycycline and caffeic acid phenethyl ester on sclerostin and bone morphogenic protein-2 expressions in experimental periodontitis

We investigated the effects of caffeic acid phenethyl ester (CAPE) and low-dose doxycycline (LDD) on sclerostin and bone morphogenic protein (BMP)-2 expression in experimental periodontitis. We used male rats in groups as follows: control group (C), periodontitis + CAPE group (PC), periodontitis + LDD group (PD), periodontitis + LDD + CAPE group (PCD) and periodontitis group (P). We administered 10 µmol/kg/day CAPE by an intraperitoneal (i.p.) injection and 10 mg/kg/day LDD by oral gavage. Histopathological changes among groups were evaluated and compared. Sclerostin and BMP-2 expression was analyzed using immunohistochemistry. LDD and/or CAPE treatment ameliorated pathology. The highest sclerostin and lowest BMP-2 expressions were found in P group. Group PC exhibited the highest BMP-2 expression scores and the most significant improvement among the treatment groups. The lowest sclerostin expression was observed in the PD group. We found that preventing sclerostin activity may be a useful treatment alternative for bone resorption, especially in cases of periodontitis and peri-implantitis. We found that CAPE and/or LDD may act as anti-sclerostin agents.

Additives Incorporated in Cellulose Acetate Membranes to Improve Its Performance as a Barrier in Periodontal Treatment

In this study, we prepared cellulose acetate membranes, by means of casting mold, incorporated with two additives, sodium carboxymethyl lignin and calcium glycerophosphate, in order to improve properties for periodontal applications. The membranes were characterized from the morphological, structural, thermal and mechanical point of view, as well as by physiological pH tests. The results showed that membranes with additives improve the physical-chemical and mechanical properties, especially when the two additives are present in the same membrane, which can be attributed to the important synergy between them. The most significant effects occur in increasing the thickness and decreasing the density, which reflects in the porosity of the membranes, although the added amounts do not exceed 1.4%. A 1% increase in lignin concentration does not change the thickness and density of the membrane, but that amount of lignin plus 0.4% calcium glycerophosphate increases the thickness of the membrane by 42% and decreases the density by about 6%. Although there is a decrease in mechanical properties, as observed in Young's modulus and crystallinity, the significant and intermittent increase in sample weight loss with both additives in physiological solution indicates that, in the long run, it can be used as a degradable barrier.

Regenerative benefits of using growth factors in treatment of periodontal defects: A systematic review and meta-analysis with Trial Sequential Analysis on preclinical studies

The ultimate goal in periodontal treatments is to achieve a functional and anatomical regeneration of the lost tissues. Numerous studies have in some way illustrated the beneficial effects of biologic modifiers in this process, yet they are subject to a rather large degree of diversity in their results. Thanks to the promising outcomes of bioengineering techniques in the field of periodontal regeneration, this systematic review aims to evaluate the effect of various biologic modifiers used in periodontal defects of animal models. Electronic databases (Medline, Scopus, Embase, Web of Science, and Google Scholar) were searched (March 2010-December 2020) for every study that used biomolecules for regeneration of periodontal osseous defects in animal models. Regenerated bone height or area, new cementum, new connective tissues, new regenerated periodontal ligament and the dimensions of epithelial attachment (either in mm/mm² or percentage) were the investigated outcomes. The risk of bias of the included studies was assessed using the SYRCLE tool. In closing, there was a meta-analysis carried out on the outcomes of interest. Trial Sequential Analysis was also carried out to figure out the power of meta-analytic outcomes. From 1995 studies which were found in the initial search, 34 studies were included in this review, and 20 of them were selected for the meta-analysis. The eligible studies were categorized according to the morphology of the experimental periodontal defects as one-, two-, and three-wall intrabony defects; furcation defects, and recession-type defects. The most studied biomolecules were rhFGF-2, rhGDF-5, platelet-derived growth factor, bone morphogenetic protein-2, and enamel matrix derivative (EMD). Based on the meta-analysis findings, combined application of biomolecules with regenerative treatments could improve new bone and cementum formation near 1 mm when compared to the control groups in one, two and three-wall intrabony defect models (p < 0.001). In furcation grade II defect, the addition of biomolecules was observed to enhance bone area gain and cementum height regeneration up to almost 2 mm (p < 0.001). Trial Sequential Analysis results confirmed the significant effect in the aforementioned meta-analyses. In cases of the buccal recession model, the application of rhFGF-2 and rhGDF-5 decreased the dimension of epithelial attachments besides regenerative advantages on bone and cementum formation, but EMD deposition exerted no inhibitory effect on epithelial down-growth. Application of biologic modifiers especially FGF-2 and GDF-5, could positively improve the regeneration of periodontal tissues, particularly cementum and bone in animal models. Trial Sequential Analysis confirmed the results but the power of the evidences was high just in some subgroup meta-analyses, like bone and cementum regeneration in furcation grade II model and cementum regeneration in one-wall intrabony defects. The outcomes of this study can potentially endow clinicians with guidelines for the appropriate application of growth factors in periodontal regenerative therapies.

Retrograde nerve growth factor signaling modulates tooth mechanical hyperalgesia induced by orthodontic tooth movement via acid-sensing ion channel 3

Orthodontic tooth movement elicits alveolar bone remodeling and orofacial pain that is manifested by tooth mechanical hyperalgesia. Nerve growth factor (NGF) is upregulated in periodontium and may modulate tooth mechanical hyperalgesia. The objectives were to examine the role of NGF in tooth mechanical hyperalgesia and to elucidate the underlying mechanisms. Tooth mechanical hyperalgesia was induced by ligating closed coil springs between incisors and molars in Sprague-Dawley rats. Retrograde labeling was performed by periodontal administration of fluor-conjugated NGF and the detection of fluorescence in trigeminal ganglia (TG). Lentivirus vectors carrying NGF shRNA were employed to knockdown the expression of NGF in TG. The administration of agonists, antagonists, and virus vectors into TG and periodontium was conducted. Tooth mechanical hyperalgesia was examined through the threshold of biting withdrawal. Our results revealed that tooth movement elicited tooth mechanical hyperalgesia that could be alleviated by NGF neutralizing antibody and that NGF was upregulated in periodontium (mainly in periodontal fibroblasts) and TG. Retrograde labeling revealed that periodontal NGF was retrogradely transported to TG after day 1. Acid-sensing ion channel 3 (ASIC3) and NGF were co-expressed in trigeminal neurons and the percentage of co-expression was significantly higher following tooth movement. The administration of NGF and NGF neutralizing antibody into TG could upregulate and downregulate the expression of ASIC3 in TG, respectively. NGF aggravated tooth mechanical hyperalgesia that could be alleviated by ASIC3 antagonist (APETx2). Moreover, NGF neutralizing antibody mitigated tooth mechanical hyperalgesia that could be recapitulated by ASIC3 agonist (GMQ). NGF-based gene therapy abolished tooth mechanical hyperalgesia and downregulated ASIC3 expression. Taken together, in response to force stimuli, periodontal fibroblasts upregulated the expressions of NGF that was retrogradely transported to TG, where NGF elicited tooth mechanical hyperalgesia through upregulating ASIC3. NGF-based gene therapy is a viable method in alleviating tooth-movement-induced mechanical hyperalgesia.

Low Dose BMP2-Doped Calcium Phosphate Graft Promotes Bone Defect Healing in a Large Animal Model

Background: Bone grafts are in high demand due to the increase in the cases of bone defects mainly caused by trauma, old age, and disease-related bone damages. Tissue-engineered calcium phosphate (CaP) biomaterials match the major inorganic contents of bone, thereby could be the potential bone graft substitute. However, CaP-bone grafts lack the osteoinductivity that is vital for effective bone regeneration. In this study, we aimed to test the bone defect healing potential of biomimetically fabricated low dose BMP2-doped CaP (BMP2.BioCaP) grafts in a large animal model.

Methods: Low dose BMP2 was doped internally (BMP2-int.BioCaP) or on the surface of CaP (BMP2-sur.BioCaP) grafts during the fabrication process. Our previous study showed the robust bone regenerative potential of BMP2-int.BioCaP and BMP2-sur.BioCaP grafts in the rat ectopic model. In this study, we investigated the bone defect healing potential of BMP2.BioCaP grafts in sheep humerus/femoral defects, as well as compared with that of autologous bone graft and clinically used deproteinized bovine bone (DBB) xenograft.

Results: Different ways of BMP2 doping did not affect the surface morphology and degradation properties of the graft materials. Micro-CT and histology results showed robustly higher bone defect-healing potential of the BMP2.BioCaP grafts compared to clinically used DBB grafts. The bone defect healing potential of BMP2.BioCaP grafts was as effective as that of the autologous bone graft. Although, BMP2-int.BioCaP doped half the amount of BMP2 compared to BMP2-sur.BioCaP, its' bone defect healing potential was even robust. The BMP2.BioCaP grafts showed less immunogenicity compared to BioCaP or DBB grafts. The volume density of blood vessel-like and bone marrow-like structures in both BMP2.BioCaP graft groups were in a similar extent to the autologous group. Meticulous observation of higher magnification histological images showed active bone regeneration and remodeling during bone defect healing in BMP2.BioCaP graft groups.

Conclusion: The robust bone regenerative potential of BMP2.BioCaP grafts in the ectopic model and in-situ bone defects in small and large animals warrant the pre-clinical studies on large animal critical-sized segmental bone defects.

Tooth Formation: Are the Hardest Tissues of Human Body Hard to Regenerate?

With increasing life expectancy, demands for dental tissue and whole-tooth regeneration are becoming more significant. Despite great progress in medicine, including regenerative therapies, the complex structure of dental tissues introduces several challenges to the field of regenerative dentistry. Interdisciplinary efforts from cellular biologists, material scientists, and clinical odontologists are being made to establish strategies and find the solutions for dental tissue regeneration and/or whole-tooth regeneration. In recent years, many significant discoveries were done regarding signaling pathways and factors shaping calcified tissue genesis, including those of tooth. Novel biocompatible scaffolds and polymer-based drug release systems are under development and may soon result in clinically applicable biomaterials with the potential to modulate signaling cascades involved in dental tissue genesis and regeneration. Approaches for whole-tooth regeneration utilizing adult stem cells, induced pluripotent stem cells, or tooth germ cells transplantation are emerging as promising alternatives to overcome existing in vitro tissue generation hurdles. In this interdisciplinary review, most recent advances in cellular signaling guiding dental tissue genesis, novel functionalized scaffolds and drug release material, various odontogenic cell sources, and methods for tooth regeneration are discussed thus providing a multi-faceted, up-to-date, and illustrative overview on the tooth regeneration matter, alongside hints for future directions in the challenging field of regenerative dentistry.

The Construction of Biomimetic Cementum Through a Combination of Bioskiving and Fluorine-Containing Biomineralization

Despite tremendous attention is given to the construction of biomimetic cementum for regeneration of tooth cementum, the lack of recapitulating the composition and hierarchical structure of cementum often leads to the poor performance of constructed materials. How to highly mimic the sophisticated composition and hierarchy of cementum remains a longstanding challenge in constructing the biomimetic cementum. Inspired by cementum formation process, a novel construction approach via a combination of bioskiving and fluorine-containing biomineralization is developed in this study. The alternative collagen lamellae (ACL) that can highly mimic the rotated plywood structure of cementum collagen matrix is fabricated via bioskiving. Followed by biomineralization in the amorphous calcium phosphate (ACP) solution with different concentration of fluorine, a series of biomimetic cementum is constructed. Screened by physicochemical characterization, the biomimetic cementum with the composition and hierarchical structure highly similar to human cementum is selected. Through in vitro biological assay, this biomimetic cementum is proven to significantly promote the adhesion, proliferation, and cementogenic differentiation of periodontal ligament cells (PDLCs). Furthermore, in vivo study demonstrates that biomimetic cementum could induce cementogenesis. This biomimetic cementum constructed via combinatory application of bioskiving and fluorine-containing biomineralization stands as a promising candidate for achieving cementum regeneration.

Periodontal regeneration using bone morphogenetic protein 2 incorporated biomimetic calcium phosphate in conjunction with barrier membrane: A pre-clinical study in dogs

Aim

To evaluate the effect of bone morphogenetic protein 2 (BMP‐2) incorporated biomimetic calcium phosphate (BMP‐2/BioCaP) in conjunction with barrier membrane on periodontal regeneration in chronic periodontitis experimental model.

Material and Methods

Chronic periodontitis experimental model with critical‐sized supra‐alveolar defects was created in 15 dogs’ mandibles. After the initial periodontal therapy, the defects were randomly assigned to the following groups: (a) control; (b) barrier membrane; (c) deproteinized bovine bone mineral + barrier membrane; (d) BioCaP + barrier membrane and (e) BMP‐2/BioCaP + barrier membrane (6 quadrants with 18 teeth per group). Eight weeks later, clinical examinations, micro‐CT, and histomorphometric analyses were performed.

Results

Clinical examinations, including plaque index, bleeding index, and probing depth, were similar for all groups. In contrast, the clinical attachment loss was significantly lower in defects grafted with BMP‐2/BioCaP and barrier membrane. The micro‐CT results showed that the height of mineralized tissue in defects grafted with BMP‐2/BioCaP and barrier membrane was significantly higher. For histometric analysis, the defects grafted with BMP‐2/BioCaP and barrier membrane exhibited significantly more connective tissue height, new cementum height, new bone height and area, as well as less down‐growth of junctional epithelium.

Conclusion

BMP‐2/BioCaP could be a promising bone substitute for periodontal regeneration.