Nickel promotes biofilm formation by Escherichia coli K-12 strains that produce curli

Bacterial Tolerance to 1-Butanol and 2-Butanol: Quantitative Assessment and Transcriptomic Response

The unique fuel characteristics of butanol and the possibility of its microbial production make it one of the most desirable environmentally friendly substitutes for petroleum fuels. However, the highly toxic nature of 1-butanol to the bacterial strains makes it unprofitable for commercial production. By comparison, 2-butanol has similar fuel qualities, and despite the difficulties in its microbial synthesis, it holds promise because it may be less toxic. This paper is the first comprehensive study to compare bacterial tolerance to different butanol isomers by examining the growth of 31 bacterial strains under 1-butanol and 2-butanol stress conditions. The presented results reveal that all tested strains showed a higher tolerance to 2-butanol than to 1-butanol at each solvent concentration (1%, 2%, and 3% v/v). Moreover, with an increased solvent concentration, bacterial cells lost their resistance to 1-butanol more rapidly than to 2-butanol. A comparison of the transcriptome profiles of the reference strains Bacillus subtilis ATCC 168 and E. coli ATCC 25922 disclosed a specific response to butanol stress. Most notably, in the presence of 2-butanol E. coli ATCC 25922 showed a reduced expression of genes for chaperones, efflux pumps, and the flagellar apparatus, as well as an enhancement of membrane and electron transport. B. subtilis, with 2-butanol, did not perform emergency sporulation or escape, as some global transcriptional stress response regulators were downregulated. The overexpression of ribosomal RNAs, pyrimidine biosynthesis genes, and DNA- and RNA-binding proteins such as pcrA and tnpB was crucial in the response.

Low-dose zinc oxide nanoparticles trigger the growth and biofilm formation of Pseudomonas aeruginosa: a hormetic response

INTRODUCTION

Hormesis describes an inverse dose-response relationship, whereby a high dose of a toxic compound is inhibitory, and a low dose is stimulatory. This study explores the hormetic response of low concentrations of zinc oxide nanoparticles (ZnO NPs) toward Pseudomonas aeruginosa.

METHOD

Samples of P. aeruginosa, i.e. the reference strain, ATCC 27,853, together with six strains recovered from patients with cystic fibrosis, were exposed to ten decreasing ZnO NPs doses (0.78-400 µg/mL). The ZnO NPs were manufactured from Peganum harmala using a chemical green synthesis approach, and their properties were verified utilizing X-ray diffraction and scanning electron microscopy. A microtiter plate technique was employed to investigate the impact of ZnO NPs on the growth, biofilm formation and metabolic activity of P. aeruginosa. Real-time polymerase chain reactions were performed to determine the effect of ZnO NPs on the expression of seven biofilm-encoding genes.

RESULT

The ZnO NPs demonstrated concentration-dependent bactericidal and antibiofilm efficiency at concentrations of 100-400 µg/mL. However, growth was significantly stimulated at ZnO NPs concentration of 25 µg/mL (ATCC 27853, Pa 3 and Pa 4) and at 12.5 µg/mL and 6.25 µg/mL (ATCC 27853, Pa 2, Pa 4 and Pa 5). No significant positive growth was detected at dilutions < 6.25 µg/mL. similarly, biofilm formation was stimulated at concentration of 12.5 µg/mL (ATCC 27853 and Pa 1) and at 6.25 µg/mL (Pa 4). At concentration of 12.5 µg/mL, ZnO NPs upregulated the expression of LasB ( ATCC 27853, Pa 1 and Pa 4) and LasR and LasI (ATCC 27853 and Pa 1) as well as RhII expression (ATCC 27853, Pa 2 and Pa 4).

CONCLUSION

When exposed to low ZnO NPs concentrations, P. aeruginosa behaves in a hormetic manner, undergoing positive growth and biofilm formation. These results highlight the importance of understanding the response of P. aeruginosa following exposure to low ZnO NPs concentrations.

Comparative genomic analysis of strong biofilm-forming Klebsiella pneumoniae isolates uncovers novel ISEcp1-mediated chromosomal integration of a full plasmid-like sequence

BACKGROUND

The goal of the current study was to elucidate the genomic background of biofilm formation in Klebsiella pneumoniae.

METHODS

Clinical isolates were screened for biofilm formation using the crystal violet assay. Antimicrobial resistance (AMR) profiles were assessed by disk diffusion and broth microdilution tests. Biofilm formation was correlated to virulence and resistance genes screened by PCR. Draft genomes of three isolates that form strong biofilm were generated by Illumina sequencing.

RESULTS

Only the siderophore-coding gene iutA was significantly associated with more pronounced biofilm formation. ST1399-KL43-O1/O2v1 and ST11-KL15-O4 were assigned to the multidrug-resistant strain K21 and the extensively drug-resistant strain K237, respectively. ST1999-KL38-O12 was assigned to K57. Correlated with CRISPR/Cas distribution, more plasmid replicons and prophage sequences were identified in K21 and K237 compared to K57. The acquired AMR genes (blaOXA-48, rmtF, aac(6')-Ib and qnrB) and (blaNDM-1, blaCTX-M, aph(3')-VI, qnrS, and aac(6')-Ib-cr) were found in K237 and K21, respectively. The latter showed a novel ISEcp1-mediated chromosomal integration of replicon type IncM1 plasmid-like structure harboring blaCTX-M-14 and aph(3')-VI that uniquely interrupted rcsC. The plasmid-mediated heavy metal resistance genes merACDEPRT and arsABCDR were spotted in K21, which also exclusively carried the acquired virulence genes mrkABCDF and the hypervirulence-associated genes iucABCD-iutA, and rmpA/A2. Pangenome analysis revealed NTUH-K2044 accessory genes most frequently shared with K21.

CONCLUSIONS

While less virulent to Galleria mellonella than ST1999 (K57), the strong biofilm former, multidrug-resistant, NDM-producer K. pneumoniae K21 (ST1399-KL43-O1/O2v1) carries a novel chromosomally integrated plasmid-like structure and hypervirulence-associated genes and represents a serious threat to countries in the area.

Pathophysiology of the Toxic Effects in Metallic Implants

Implants play a very crucial role in modern era of medicine and address several needs in all the medical specialties. Both essential and nonessential metals released from implants at high concentrations can impair biological functions and result in toxicity involving multiple systems of the body. Furthermore, the toxicity information is typically based on exposure through dietary intake and/or occupational/environmental exposure but, since the in vivo implant environment and its composition is different or unknown, individual implants toxic effects needs to be elaborated. Several clinical and nonclinical assessment tools are advised by FDA to evaluate biocompatibility issues, such as risk of immunological response, tissue destruction or overgrowth, and other adverse reactions. The Center for Devices and Radiological Health (CDRH) Biocompatibility Guidelines state that biocompatibility end points caused by metallic implants includes cytotoxicity, sensitization, acute and chronic systemic toxicity, pyrogenicity, genotoxicity, carcinogenicity, implantation, hemocompatibility, reproductive abnormalities, developmental toxicity and biodegradation. Exposure to metal ions which acts as haptens can lead to both local and systemic hypersensitivity reactions which are generally believed to be a Type IV (delayed hypersensitivity) response. Currently, most assessment tools of implant associated hypersensitivity are based on skin sensitization which provides further scopes for research in understanding patient specific immune response causing systemic hypersensitivity.

Efflux pumps and microbial biofilm formation

Biofilm-related infections are resistant forms of pathogens that are regarded as a medical problem, particularly due to the spread of multiple drug resistance. One of the factors associated with biofilm drug resistance is the presence of various types of efflux pumps in bacteria. Efflux pumps also play a role in biofilm formation by influencing Physical-chemical interactions, mobility, gene regulation, quorum sensing (QS), extracellular polymeric substances (EPS), and toxic compound extrusion. According to the findings of studies based on efflux pump expression analysis, their role in the anatomical position within the biofilm will differ depending on the biofilm formation stage, encoding gene expression level, the type and concentration of substrate. In some cases, the function of the efflux pumps can overlap with each other, so it seems necessary to accurate identify the efflux pumps of biofilm-forming bacteria along with their function in this process. Such studies will help to choose treatment strategy, at least in combination with antibiotics. Furthermore, if the goal of treatment is an efflux pump manipulation, we should not limit it to inhibition.

Compounds That Have an Anti-Biofilm Effect against Common Bacteria at Very Low Concentrations and Their Antibiotic Combination Effect

Two synthetic compounds, MHY1383, azo-resveratrol and MHY1387, 5-[4-hydroxy-3,5-methoxybenzy]-2-thioxodihydropyrimidine-4,6[1H,5H]-dione have been reported to have an anti-biofilm effect on Pseudomonas aeruginosa at very low concentrations (1-10 pM). Here, we investigated the anti-biofilm effects of these compounds in various bacteria. We found that MHY1383 significantly inhibited Escherichia coli, Bacillus subtilis, and Staphylococcus aureus biofilm formation at 1 pM, 1 nM, and 10 nM, respectively. MHY1387 also inhibited the biofilm formation of E. coli, B. subtilis, and S. aureus at 1 pM, 10 nM, and 100 pM, respectively. Both MHY1383 and MHY1387 showed medium-dependent anti-biofilm effects on Salmonella enterica at high concentrations (10 μM). We also tested the susceptibility to antibiotics by measuring the minimum inhibitory concentration (MIC) in various bacteria. When P. aeruginosa, E. coli, B. subtilis, S. enterica, and S. aureus were treated with MHY1383 or MHY1387 in combination with four different antibiotics, the MICs of carbenicillin against B. subtilis and S. aureus were lowered more than two-fold by the combination with MHY1387. However, in all other combinations, the MIC changed within two-fold. The results of this study suggest that MHY1383 and MHY1387 are effective anti-biofilm agents and can be used at very low concentrations against biofilms formed by various types of bacteria. We also suggest that even if a substance that inhibits biofilm is used together with antibiotics, it does not necessarily have the effect of lowering the MIC of the antibiotics.

Pseudomonas aeruginosa Clusters Toxic Nickel Nanoparticles to Enhance Survival

Microorganisms forming a biofilm might become multidrug-resistant by information exchange. Multi-resistant, biofilm-producing microorganisms are responsible for a major portion of hospital-acquired infections. Additionally, these microorganisms cause considerable damage in the industrial sector. Here, we screened several nanoparticles of transition metals for their antibacterial properties. The nanoparticles sizes of nickel (<300 nm) and nickel oxide (<50 nm) were analyzed with transmission electron microscopy. We could show that the antibacterial efficacy of nickel and nickel oxide nanoparticles on Pseudomonas aeruginosa isolated from household appliances and Staphylococcus aureus was the highest. Interestingly, only P. aeruginosa was able to survive at high concentrations (up to 50 mM) due to clustering toxic nanoparticles out of the medium by biofilm formation. This clustering served to make the medium nearly free of nanoparticles, allowing the bacteria to continue living without contact to the stressor. We observed these clusters by CLSM, SEM, and light microscopy. Moreover, we calculated the volume of NiO particles in the bacterial biofilms based on an estimated thickness of 5 nm from the TEM images as an average volume of 3.5 × 10−6 µm3. These results give us a new perspective on bacterial defense mechanisms and might be useful in industries such as water purification.

Effect of nickel (II) on the performance of anodic electroactive biofilms in bioelectrochemical systems

The impact of nickel (Ni²⁺) on the performance of anodic electroactive biofilms (EABs) in the bioelectrochemical system (BES) was investigated in this study. Although it has been reported that Ni²⁺ influences microorganisms in a number of ways, it is unknown how its presence in the anode of a BES affects extracellular electron transfer (EET) of EABs, microbial viability, and the bacterial community. Results revealed that the addition of Ni²⁺ decreased power output from 673.24 ± 12.40 mW/m² at 0 mg/L to 179.26 ± 9.05 mW/m² at 80 mg/L. The metal and chemical oxygen demand removal efficiencies of the microbial fuel cells (MFCs) declined as Ni²⁺ concentration increased, which could be attributed to decreased microbial viability as revealed by SEM and CLSM. FTIR analysis revealed the involvement of various microbial biofilm functional groups, including hydroxyl, amides, methyl, amine, and carboxyl, in the uptake of Ni²⁺. The presence of Ni²⁺ on the anodic biofilms was confirmed by SEM-EDS and XPS analyses. CV demonstrated that the electron transfer performance of the anodic biofilms was negatively correlated with the various Ni²⁺ concentrations. EIS showed that the internal resistance of the MFCs increased with increasing Ni²⁺ concentration, resulting in a decrease in power output. High-throughput sequencing results revealed a decrease in Geobacter and an increase in Desulfovibrio in response to Ni²⁺ concentrations of 10, 20, 40, and 80 mg/L. Furthermore, the various Ni²⁺ concentrations decreased the expression of EET-related genes. The Ni²⁺-fed MFCs had a higher abundance of the nikR gene than the control group, which was important for Ni²⁺ resistance. This work advances our understanding of Ni²⁺ inhibition on EABs, as well as the concurrent removal of organic matter and Ni²⁺ from wastewater.

Electrochemical Control of Biofilm Formation and Approaches to Biofilm Removal

This review deals with microbial adhesion to metal-based surfaces and the subsequent biofilm formation, showing that both processes are a serious problem in the food industry, where pathogenic microorganisms released from the biofilm structure may pollute food and related material during their production. Biofilm exhibits an increased resistance toward sanitizers and disinfectants, which complicates the removal or inactivation of microorganisms in these products. In the existing traditional techniques and modern approaches for clean-in-place, electrochemical biofilm control offers promising technology, where surface properties or the reactions taking place on the surface are controlled to delay or prevent cell attachment or to remove microbial cells from the surface. In this overview, biofilm characterization, the classification of bacteria-forming biofilms, the influence of environmental conditions for bacterial attachment to material surfaces, and the evaluation of the role of biofilm morphology are described in detail. Health aspects, biofilm control methods in the food industry, and conventional approaches to biofilm removal are included as well, in order to consider the possibilities and limitations of various electrochemical approaches to biofilm control with respect to potential applications in the food industry.

Response mechanism of psychrotolerant Bacillus cereus D2 towards Ni (II) toxicity and involvement of amino acids in Ni (II) toxicity reduction

The toxic effect of Nickel (Ni (II)) on humans and animals has been previously addressed. Owing to the important application of psychrotolerant bacteria in Ni (II) damage remediation in contamination sites at low temperatures, the response mechanism of psychrotolerant bacteria to Ni (II) toxicity must be elucidated. Therefore, the effect of Ni (II) toxicity on a psychrotolerant Bacillus cereus D2 was studied, showing a way to alleviate the Ni (II) toxicity in strain D2. The results showed that strain D2 growth was completely inhibited at a concentration of 100 mg/L of Ni (II). The main effects of Ni (II) toxicity on strain D2 were membrane damage and reactive oxygen species-dependent oxidative stress. Additionally, Ni (II) toxicity resulted in dysregulation of the cell cycle in strain D2. Furthermore, metabolomic analysis showed that the biosynthesis of amino acids and ABC transporters were significantly affected, and the relative abundance of seven important amino acids changed in a concentration-dependent manner. Addition of 20 mM or 5 mM amino acids to 100 mg/L Ni (II)-treated strain D2 restored its growth. This study provides insights into the way to alleviate the Ni (II) toxicity in strain D2, thus contributing to the development of bioremediation strategies.

Concentration-dependent effects of nickel doping on activated carbon biocathodes

In microbial electrosynthesis (MES), microorganisms grow on a cathode electrode as biofilm, or in the catholyte as planktonic biomass, and utilize CO2 for their growth and metabolism. Modification of the...

Unraveling the complex regulatory networks in biofilm formation in bacteria and relevance of biofilms in environmental remediation

Biofilms are assemblages of bacteria embedded within a matrix of extracellular polymeric substances (EPS) attached to a substratum. The process of biofilm formation is a complex phenomenon regulated by the intracellular and intercellular signaling systems. Various secondary messenger molecules such as cyclic dimeric guanosine 3',5'-monophosphate (c-di-GMP), cyclic adenosine 3',5'-monophosphate (cAMP), and cyclic dimeric adenosine 3',5'-monophosphate (c-di-AMP) are involved in complex signaling networks to regulate biofilm development in several bacteria. Moreover, the cell to cell communication system known as Quorum Sensing (QS) also regulates biofilm formation via diverse mechanisms in various bacterial species. Bacteria often switch to the biofilm lifestyle in the presence of toxic pollutants to improve their survivability. Bacteria within a biofilm possess several advantages with regard to the degradation of harmful pollutants, such as increased protection within the biofilm to resist the toxic pollutants, synthesis of extracellular polymeric substances (EPS) that helps in the sequestration of pollutants, elevated catabolic gene expression within the biofilm microenvironment, higher cell density possessing a large pool of genetic resources, adhesion ability to a wide range of substrata, and metabolic heterogeneity. Therefore, a comprehensive account of the various factors regulating biofilm development would provide valuable insights to modulate biofilm formation for improved bioremediation practices. This review summarizes the complex regulatory networks that influence biofilm development in bacteria, with a major focus on the applications of bacterial biofilms for environmental restoration.

The role of antibiotics and heavy metals on the development, promotion, and dissemination of antimicrobial resistance in drinking water biofilms

Antimicrobial resistance (AMR), as well as the development of biofilms in drinking water distribution systems (DWDSs), have become an increasing concern for public health and management. As bulk water travels from source to tap, it may accumulate contaminants of emerging concern (CECs) such as antibiotics and heavy metals. When these CECs and other selective pressures, such as disinfection, pipe material, temperature, pH, and nutrient availability interact with planktonic cells and, consequently, DWDS biofilms, AMR is promoted. The purpose of this review is to highlight the mechanisms by which AMR develops and is disseminated within DWDS biofilms. First, this review will lay a foundation by describing how DWDS biofilms form, as well as their basic intrinsic and acquired resistance mechanisms. Next, the selective pressures that further induce AMR in DWDS biofilms will be elaborated. Then, the pressures by which antibiotic and heavy metal CECs accumulate in DWDS biofilms, their individual resistance mechanisms, and co-selection are described and discussed. Finally, the known human health risks and current management strategies to mitigate AMR in DWDSs will be presented. Overall, this review provides critical connections between several biotic and abiotic factors that influence and induce AMR in DWDS biofilms. Implications are made regarding the importance of monitoring and managing the development, promotion, and dissemination of AMR in DWDS biofilms.

Gene Regulation of Biofilm-Associated Functional Amyloids

Biofilms are bacterial communities encased in a rigid yet dynamic extracellular matrix. The sociobiology of bacterial communities within a biofilm is astonishing, with environmental factors playing a crucial role in determining the switch from planktonic to a sessile form of life. The mechanism of biofilm biogenesis is an intriguingly complex phenomenon governed by the tight regulation of expression of various biofilm-matrix components. One of the major constituents of the biofilm matrix is proteinaceous polymers called amyloids. Since the discovery, the significance of biofilm-associated amyloids in adhesion, aggregation, protection, and infection development has been much appreciated. The amyloid expression and assembly is regulated spatio-temporarily within the bacterial cells to perform a diverse function. This review provides a comprehensive account of the genetic regulation associated with the expression of amyloids in bacteria. The stringent control ensures optimal utilization of amyloid scaffold during biofilm biogenesis. We conclude the review by summarizing environmental factors influencing the expression and regulation of amyloids.

Bacterial biofilm formation on stainless steel in the food processing environment and its health implications

Biofilm formation (BF) and production in the food processing industry (FPI) is a continual threat to food safety and quality. Various bacterial pathogens possess the ability to adhere and produce biofilms on stainless steel (SS) in the FPI due to flagella, curli, pili, fimbrial adhesins, extra polymeric substances, and surface proteins. The facilitating environmental conditions (temperature, pressure, variations in climatic conditions), SS properties (surface energy, hydrophobicity, surface roughness, topography), type of raw food materials, pre-processing, and processing conditions play a significant role in the enhancement of bacterial adhesion and favorable condition for BF. Furthermore, biofilm formers can tolerate different sanitizers and cleaning agents due to the constituents, concentration, contact time, bacterial cluster distribution, and composition of bacteria within the biofilm. Also, bacterial biofilms' ability to produce various endotoxins and exotoxins when consumed cause food infections and intoxications with serious health implications. It is thus crucial to understand BF's repercussions and develop effective interventions against these phenomena that make persistent pathogens difficult to remove in the food processing environment.

Pellicle formation by Escherichia coli K-12: Role of adhesins and motility

Initial work to generate physically robust biofilms for biocatalytic applications revealed that Escherichia coli K-12 can form a floating biofilm at the air-liquid interface, commonly referred to as a pellicle. Unlike other species where pellicle formation is well-characterised, such as Bacillus subtilis, there are few reports of E. coli K-12 pellicles in the literature. In order to study pellicle formation, a growth model was developed and pellicle formation was monitored over time. Mechanical forces, both motility and shaking, were shown to have effects on pellicle formation and development. The role and regulation of curli, an amyloid protein adhesin critical in E. coli K-12 biofilm formation, was studied by using promoter-green fluorescent protein reporters; flow cytometry and confocal laser scanning microscopy were used to monitor curli expression over time and in different locations. Curli were found to be not only crucial for pellicle formation, but also heterogeneously expressed within the pellicle. The components of the extracellular polymeric substances (EPS) in pellicles were analysed by confocal microscopy using lectins, revealing distinct pellicle morphology on the air-facing and medium-facing sides, and spatially- and temporally-regulated generation of the EPS components poly-N-acetyl glucosamine and colanic acid. We discuss the difference between pellicles formed by E. coli K-12, pathogenic E. coli strains and other species, and the relationship between E. coli K-12 pellicles and solid surface-attached biofilms.

Pharmaceutical disposal facilitates the mobilization of resistance determinants among microbiota of polluted environment

The emergence of resistance on exposure to pharmaceuticals among microorganisms has raised serious concern in the therapeutic approach against infectious diseases. Effluents discharge from hospitals, industries, and urban settlements containing pharmaceuticals and other toxic compounds into the aquatic ecosystem selects bacterial population against them; thereby promotes acquisition and dissemination of resistant traits among the inhabitant microbiota. The present study was aimed to determine the prevalence and multidrug resistance pattern of Extended Spectrum β-lactamase (ESBL) producing and non-producing bacterial isolates from the heavily polluted Delhi stretch of river Yamuna, India. Additionally, the role of abiotic factors in the dissemination of conjugative plasmids harbouring resistance genes was also studied using E. coli J53 as recipient and resistant E. coli isolates as donor strains. Of the 227 non-duplicate bacterial isolates, 60% (136) were identified as ESBL⁺ and 40% (91) as ESBL. ESBL⁺ isolates were found highly resistant to β-lactam and non-β-lactam classes of antibiotics compared with the ESBL^- isolates. 68% of ESBL⁺ and 24% of ESBL^- isolates showed an MAR index of ≥0.5. Surprisingly, multidrug resistance (MDR), extensively drug resistance (XDR), and pandrug resistance (PDR) phenotype were observed for 78.6%, 16.9%, and 0.7% of ESBL⁺ and 90%, 3%, and none for PDR among ESBL^- isolates. Conjugation under different conditions showed a higher mobilization rate at neutral pH (7-7.5) for ESBL⁺ isolates. Conjugation frequency was maximum at 40 °C for the isolate E. coli MRB6 (4.1 × 10^-5) and E. coli MRE32 (4.89 × 10^-4) and at 35 °C for E. coli MRA11 (4.89 × 10^-5). The transconjugants obtained were found tolerating different concentrations of mercuric chloride (0.0002-0.2 mg/L). Increased biofilm formation for ESBL⁺ isolates was observed on supplementing media with HgCl₂ (2 μg/mL) either singly or in combination with CTX (10 μg/mL). The present study demonstrates that anthropogenically influenced aquatic environments act as a reservoir of MDR, XDR, and even PDR strains; thereby posing a potent public health risk.

Hormetic Promotion of Biofilm Growth by Polyvalent Bacteriophages at Low Concentrations

Interactions between bacteriophages (phages) and biofilms are poorly understood despite their broad ecological and water quality implications. Here, we report that biofilm exposure to lytic polyvalent phages at low concentrations (i.e., 10²-10⁴ phages/mL) can counterintuitively promote biofilm growth and densification (corroborated by confocal laser scanning microscopy (CLSM)). Such exposure hormetically upregulated quorum sensing genes (by 4.1- to 24.9-fold), polysaccharide production genes (by 3.7- to 9.3-fold), and curli synthesis genes (by 4.5- to 6.5-fold) in the biofilm-dwelling bacterial hosts (i.e., Escherichia coli and Pseudomonas aeruginosa) relative to unexposed controls. Accordingly, the biofilm matrix increased its polysaccharide and extracellular DNA content relative to unexposed controls (by 41.8 ± 2.3 and 81.4 ± 2.2%, respectively), which decreased biofilm permeability and increased structural integrity. This contributed to enhanced resistance to disinfection with chlorine (bacteria half-lives were 6.08 ± 0.05 vs 3.91 ± 0.03 min for unexposed controls) and to subsequent phage infection (biomass removal was 18.2 ± 1.2 vs 32.3 ± 1.2% for unexposed controls), apparently by mitigating diffusion of these antibacterial agents through the biofilm. Overall, low concentrations of phages reaching a biofilm may result in unintended biofilm stimulation, which might accelerate biofouling, biocorrosion, or other biofilm-related water quality problems.

Non-pathogenic Escherichia coli biofilms: effects of growth conditions and surface properties on structure and curli gene expression

Biofilm formation is a harmful phenomenon in many areas, such as in industry and clinically, but offers advantages in the field of biocatalysis for the generation of robust biocatalytic platforms. In this work, we optimised growth conditions for the production of Escherichia coli biofilms by three strains (PHL644, a K-12 derivative with enhanced expression of the adhesin curli; the commercially-used strain BL21; and the probiotic Nissle 1917) on a variety of surfaces (plastics, stainless steel and PTFE). E. coli PHL644 and PTFE were chosen as optimal strain and substratum, respectively, and conditions (including medium, temperature, and glucose concentration) for biofilm growth were determined. Finally, the impact of these growth conditions on expression of the curli genes was determined using flow cytometry for planktonic and sedimented cells. We reveal new insights into the formation of biofilms and expression of curli in E. coli K-12 in response to environmental conditions.

In vitro evaluation of mercury (Hg2+) effects on biofilm formation by clinical and environmental isolates of Klebsiella pneumoniae

The increase in urbanization and industrialization has contributed to the contamination of different environments by means of xenobiotic compounds, such as heavy metals, causing changes in microbial communities. Among these metals, the Mercury (Hg²⁺) is one the most prevalent toxic metals for the environment The present study aimed to evaluate the effect of mercury on the formation of biofilm by environmental (collected from urban stream water) and clinical isolates of Klebsiella pneumoniae. In addition, antibiotic resistance, virulence factors, and genetic diversity were investigated. Taxonomic identity of eight isolates (one reference, two clinical, and five environmental isolates) was performed by MALDI-TOF-MS, while the antibiotic susceptibility profile was assessed by the disc diffusion method. The ability to form biofilms was evaluated by culture on Congo red agar and by crystal violet staining. Biofilm structure was analyzed by scanning electron microscopy. The hydrophobicity profile and the presence of the virulence genes cps, fimH, and mrkD was investigated. The presence of merA and its relationship with antimicrobial resistance were also assessed. The identity of all isolates was confirmed by MALDI-TOF-MS, and different profiles of resistance to mercury and antibiotics as well as of biofilm formation were identified for the clinical and environmental isolates. All isolates were hydrophilic and positive for the virulence genes cps, fimH, and mrkD; only the clinical isolate K36-A2 was positive for merA. The diversity of the isolates was confirmed by ERIC-PCR, which revealed high heterogeneity among the isolates. In conclusion, the data demonstrate that the investigated isolates present different responses to exposure to Hg²⁺ and correspond to distinct populations of K. pneumoniae disseminated in the investigated environment. The data obtained in this work will aid in understanding the mechanisms of survival of this pathogen under adverse conditions.

Heavy Metal Ion Stress on Halobacterium salinarum R1 Planktonic Cells and Biofilms

Halobacterium salinarum R1 is an extremely halophilic archaeon, able to attach to the surface and to form characteristic biofilm structures under physiological conditions. However, the effect of environmental stress factors like heavy metals on biofilms was still unknown. Here, we report on the first insights into H. salinarum biofilm formation when exposed to copper, nickel and zinc and describe the effects of metal ions on the architecture of mature biofilms. We also studied the effects on gene expression in planktonic cells. Investigation of planktonic growth and cell adhesion in the presence of sub-lethal metal concentrations yielded an up to 60% reduced adhesion in case of copper and a significantly enhanced adhesion in case of zinc, whereas nickel treatment had no effect on adhesion. A PMA-qPCR assay was developed to quantify live/dead cells in planktonic cultures and mature biofilms, enabling the investigation of cell vitality after metal exposure. An increased resistance was observed in biofilms with up to 80% in case of copper- and up to 50% in case of zinc exposure compared to planktonic cells. However, nickel-treated biofilms showed no significant increase of cell survival. Microscopic investigation of the architecture of mature biofilms exposed to lethal metal concentrations demonstrated an increased detachment and the formation of large microcolonies after copper treatment, whereas the number of adherent cells increased strongly in nickel-exposed biofilms. In contrast, zinc exposed-biofilms showed no differences compared to the control. Analysis of the expression of genes encoding putative metal transporters by qRT-PCR revealed specific changes upon treatment of the cells with heavy metals. Our results demonstrate diverse effects of heavy metal ions on H. salinarum and imply a metal-specific protective response of cells in biofilms.

Metal-Adapted Bacteria Isolated From Wastewaters Produce Biofilms by Expressing Proteinaceous Curli Fimbriae and Cellulose Nanofibers

Bacterial biofilm plays a pivotal role in bioremediation of heavy metals from wastewaters. In this study, we isolated and identified different biofilm producing bacteria from wastewaters. We also characterized the biofilm matrix [i.e., extracellular polymeric substances (EPS)] produced by different bacteria. Out of 40 isolates from different wastewaters, only 11 (27.5%) isolates (static condition at 28°C) and 9 (22.5%) isolates (agitate and static conditions at 28 and 37°C) produced air–liquid (AL) and solid–air–liquid (SAL) biofilms, respectively, only on salt-optimized broth plus 2% glycerol (SOBG) but not in other media tested. Biomass biofilms and bacteria coupled with AL biofilms were significantly (P ≤ 0.001) varied in these isolates. Escherichia coli (isolate ENSD101 and ENST501), Enterobacter asburiae (ENSD102), Enterobacter ludwigii (ENSH201), Pseudomonas fluorescens (ENSH202 and ENSG304), uncultured Vitreoscilla sp. (ENSG301 and ENSG305), Acinetobacter lwoffii (ENSG302), Klebsiella pneumoniae (ENSG303), and Bacillus thuringiensis (ENSW401) were identified based on 16S rRNA gene sequencing. Scanning electron microscope (SEM) images revealed that biofilm matrix produced by E. asburiae ENSD102, uncultured Vitreoscilla sp. ENSG301, A. lwoffii ENSG302, and K. pneumoniae ENSG303 are highly fibrous, compact, and nicely interlinked as compared to the biofilm developed by E. ludwigii ENSH201 and B. thuringiensis ENSW401. X-ray diffraction (XRD) results indicated that biofilm matrix produced by E. asburiae ENSD102, uncultured Vitreoscilla sp. ENSG301, and A. lwoffii ENSG302 are non-crystalline amorphous nature. Fourier transform infrared (FTIR) spectroscopy showed that proteins and polysaccharides are the main components of the biofilms. Congo red binding results suggested that all these bacteria produced proteinaceous curli fimbriae and cellulose-rich polysaccharide. Production of cellulose was also confirmed by Calcofluor binding- and spectrophotometric assays. E. asburiae ENSD102, Vitreoscilla sp. ENSG301, and A. lwoffii ENSG302 were tested for their abilities to form the biofilms exposure to 0 to 2000 mg/L of copper sulfate (for Cu), zinc sulfate (for Zn), lead nitrate (for Pb), nickel chloride (for Ni), and potassium dichromate (for Cr), several concentrations of these metals activated the biofilm formation. The polysaccharides is known to sequester the heavy metals thus, these bacteria might be applied to remove the heavy metals from wastewater.

Effects of Sub-lethal Concentrations of Silver Nanoparticles on a Simulated Intestinal Prokaryotic-Eukaryotic Interface

Nanotechnology applications are expected to bring a range of benefits to the food sector, aiming to provide better quality and conservation. In this research, the physiological response of both an Escherichia coli mono-species biofilm and Caco-2 intestinal cells to sub-lethal concentrations of silver nanoparticles (AgNPs) has been investigated. In order to simulate the anaerobic and aerobic compartments required for bacteria and intestinal cells growth, a simplified semi-batch model based on a transwell permeable support was developed. Interaction between the two compartments was obtained by exposing Caco-2 intestinal cells to the metabolites secreted by E. coli biofilm after its exposure to AgNPs. To the best of the authors’ knowledge, this study is the first to investigate the effect of AgNPs on Caco-2 cells that takes into consideration previous AgNP-intestinal biofilm interactions, and at concentrations mimicking real human exposure. Our data show that 1 μg/mL AgNPs in anaerobic conditions (i) promote biofilm formation up to 2.3 ± 0.3 fold in the first 72 h of treatment; (ii) increase reactive oxygen species (ROS) production to 84 ± 21% and change the physiological status of microbial cells after 96 h of treatment; (iii) seriously affect a 72-h old established biofilm, increasing the level of oxidative stress to 86 ± 21%. Moreover, the results indicate that oxygen renders the biofilm more adequate to counteract AgNP effects. Comet assays on Caco-2 cells demonstrated a protective role of biofilm against the genotoxic effect of 1 μg/mL AgNPs on intestinal epithelial cells.

Cellulose production is coupled to sensing of the pyrimidine biosynthetic pathway via c-di-GMP production by the DgcQ protein of Escherichia coli

Production of cellulose, a stress response-mediated process in enterobacteria, is modulated in Escherichia coli by the activity of the two pyrimidine nucleotide biosynthetic pathways, namely, the de novo biosynthetic pathway and the salvage pathway, which relies on the environmental availability of pyrimidine nitrogenous bases. We had previously reported that prevalence of the salvage over the de novo pathway triggers cellulose production via synthesis of the second messenger c-di-GMP by the DgcQ (YedQ) diguanylate cyclase. In this work, we show that DgcQ enzymatic activity is enhanced by UTP, whilst being inhibited by N-carbamoyl-aspartate, an intermediate of the de novo pathway. Thus, direct allosteric control by these ligands allows full DgcQ activity exclusively in cells actively synthesizing pyrimidine nucleotides via the salvage pathway. Inhibition of DgcQ activity by N-carbamoyl-aspartate appears to be favoured by protein-protein interaction between DgcQ and PyrB, a subunit of aspartate transcarbamylase, which synthesizes N-carbamoyl-aspartate. Our results suggest that availability of pyrimidine bases might be sensed, somehow paradoxically, as an environmental stress by E. coli. We hypothesize that this link might have evolved since stress events, leading to extensive DNA/RNA degradation or lysis of neighbouring cells, can result in increased pyrimidine concentrations and activation of the salvage pathway.

Spatial Organization Plasticity as an Adaptive Driver of Surface Microbial Communities

Biofilms are dynamic habitats which constantly evolve in response to environmental fluctuations and thereby constitute remarkable survival strategies for microorganisms. The modulation of biofilm functional properties is largely governed by the active remodeling of their three-dimensional structure and involves an arsenal of microbial self-produced components and interconnected mechanisms. The production of matrix components, the spatial reorganization of ecological interactions, the generation of physiological heterogeneity, the regulation of motility, the production of actives enzymes are for instance some of the processes enabling such spatial organization plasticity. In this contribution, we discussed the foundations of architectural plasticity as an adaptive driver of biofilms through the review of the different microbial strategies involved. Moreover, the possibility to harness such characteristics to sculpt biofilm structure as an attractive approach to control their functional properties, whether beneficial or deleterious, is also discussed.

Evaluation of anti-bacterial effects of nickel nanoparticles on biofilm production by Staphylococcus epidermidis

BACKGROUND AND OBJECTIVES

Staphylococcus epidermidis produces biofilm by extracellular polysaccharides, causing bacterial adherence to different surfaces. Anti-microbial effects of nickel nanoparticles on some bacterial strains such as S. aureus and Escherichia coli have been determined in limited studies. The aim of the present study is to examine the inhibitory effect of nickel nanoparticles on biofilm formation using clinical isolates of S. epidermidis and its hemolytic effect on human red blood cells.

MATERIALS AND METHODS

Twenty two S. epidermidis isolates were collected and identified by standard microbiological methods. Microtiter plate method was used to determine the biofilm production in bacterial isolates. The amounts of biofilm formation by isolates in the presence of 0.01, 0.05, 0.1, and 1 mg/mL concentrations of nickel nanoparticles were measured. Hemolytic activity of different concentrations of nickel nanoparticles was measured on human RBC suspensions.

RESULTS

Twenty isolates were strong, and two isolates were moderate biofilm producers. Biofilm formation significantly decreased in the presence of 0.05, 0.1, and 1 mg/mL of nickel nanoparticles (p<0.05). Although in the presence of 0.01 mg/mL of nickel nanoparticles, decrease in biofilm formation was observed but it was not statistically significant (p=0.448). Slight hemolytic activity was seen in the presence of nickel nanoparticles.

CONCLUSION

In this study, the ability of biofilm production was demonstrated for all clinical isolates of S. epidermidis. On the other hand, the lowering effects of nickel nanoparticles on biofilm formation were observed.

Ni exposure impacts the pool of free Fe and modifies DNA supercoiling via metal-induced oxidative stress in Escherichia coli K-12

The biology of nickel has been widely studied in mammals because of its carcinogenic properties, whereas few studies have been performed in microorganisms. In the present work, changes accompanying stress caused by nickel were evaluated at the cellular level using RNA-Seq in Escherichia coli K-12. Interestingly, a very large number of genes were found to be deregulated by Ni stress. Iron and oxidative stress homeostasis maintenance were among the most highly enriched functional categories, and genes involved in periplasmic copper efflux were among the most highly upregulated. These results suggest that the deregulation of Fe and Cu homeostatic genes is caused by a release of free Cu and Fe ions in the cell which in turn activate the Cu and Fe homeostatic systems. The content of Cu was not significantly affected upon the addition of Ni to the growth medium, nor were the Cus and CopA Cu-efflux systems important for the survival of bacteria under Ni stress In contrast the addition of Ni slightly decreased the amount of cellular Fe and activated the transcription of Fur regulated genes in a Fur-dependent manner. Cu or Fe imbalance together with oxidative stress might affect the structure of DNA. Further experiments revealed that Ni alters the state of DNA folding by causing a relaxed conformation, a phenomenon that is reversible by addition of the antioxidant Tiron or the Fe chelator Dip. The Tiron-reversible DNA relaxation was also observed for Fe and to a lesser extent with Cu but not with Co. DNA supercoiling is well recognized as an integral aspect of gene regulation. Moreover our results show that Ni modifies the expression of several nucleoid-associated proteins (NAPs), important agents of DNA topology and global gene regulation. This is the first report describing the impact of metal-induced oxidative on global regulatory networks.

Toxic metal resistance in biofilms: diversity of microbial responses and their evolution

Since biofilms are an important issue in the fields of medicine and health, several recent microbiological studies have focused on their formation and their contribution to toxic compound resistance mechanisms. In this review, we describe how metals impact biofilm formation and resistance, and how biofilms can help cells resist toxic metals. First, the organic matrix acts as a barrier isolating the cells from many environmental stresses. Secondly, the metabolism of the cells changes, and a slowly-growing or non-growing sub-population of cells known as persisters emerges. Thirdly, in the case of multispecies biofilms, metabolic interactions are developed, allowing cells to be more persistent or to have greater capacity to survive than a single species biofilm. Finally, we discuss how the high density of the cells may promote horizontal gene transfer processes, resulting in the acquisition of new features. All these crucial mechanisms enable microorganisms to survive and colonize toxic environments, and probably accelerate ongoing evolutionary processes.

Cadmium modulates biofilm formation by Staphylococcus epidermidis

The aim of the study was to evaluate the effect of cadmium exposure on Staphylococcus epidermidis (ATCC 35984) biofilm formation. Bacteria were cultured in the absence or presence of different concentrations (0–50 µM) of cadmium. Biofilm formation and bacterial viability were assessed. Quantitative Real Time-PCR (qRT-PCR) was used to determine the mRNA expression of molecular markers of S. epidermidis biofilm formation and dispersion. S. epidermidis biofilm formation was stimulated (p < 0.001) by 1.56 and 3.13 µM cadmium. Confocal laser scanning microscopy (CLSM) analysis confirmed an increase in biofilm thickness (23 and 22 µm, versus 17.8 µm in the controls) after exposure to 1.56 or 3.13 µM cadmium, respectively. qRT-PCR was performed showing the up-regulation of atlE, embp, aap, icaA and icaB after exposure to 3.13 µM cadmium. Taken together, these findings show that cadmium at low, sub-toxic concentrations acts as inducer of S. epidermidis biofilm formation.

"NiCo Buster": engineering E. coli for fast and efficient capture of cobalt and nickel

BACKGROUND

Metal contamination is widespread and results from natural geogenic and constantly increasing anthropogenic sources (mainly mining and extraction activities, electroplating, battery and steel manufacturing or metal finishing). Consequently, there is a growing need for methods to detoxify polluted ecosystems. Industrial wastewater, surface water and ground water need to be decontaminated to alleviate the contamination of soils and sediments and, ultimately, the human food chain. In nuclear power plants, radioactive metals are produced; these metals need to be removed from effluents before they are released into the environment, not only for pollution prevention but also for waste minimization. Many physicochemical methods have been developed for metal removal from aqueous solutions, including chemical coagulation, adsorption, extraction, ion exchange and membrane separation; however, these methods are generally not metal selective. Bacteria, because they contain metal transporters, provide a potentially competitive alternative to the current use of expensive and high-volume ion-exchange resins.

RESULTS

The feasibility of using bacterial biofilters as efficient tools for nickel and cobalt ions specific remediation was investigated. Among the factors susceptible to genetic modification in Escherichia coli, specific efflux and sequestration systems were engineered to improve its metal sequestration abilities. Genomic suppression of the RcnA nickel (Ni) and cobalt (Co) efflux system was combined with the plasmid-controlled expression of a genetically improved version of a specific metallic transporter, NiCoT, which originates from Novosphingobium aromaticivorans. The resulting strain exhibited enhanced nickel (II) and cobalt (II) uptake, with a maximum metal ion accumulation of 6 mg/g bacterial dry weight during 10 min of treatment. A synthetic adherence operon was successfully introduced into the plasmid carrying the improved NiCoT transporter, conferring the ability to form thick biofilm structures, especially when exposed to nickel and cobalt metallic compounds.

CONCLUSIONS

This study demonstrates the efficient use of genetic engineering to increase metal sequestration and biofilm formation by E. coli. This method allows Co and Ni contaminants to be sequestered while spatially confining the bacteria to an abiotic support. Biofiltration of nickel (II) and cobalt (II) by immobilized cells is therefore a promising option for treating these contaminants at an industrial scale.

Unraveling microbial biofilms of importance for food microbiology

The presence of biofilms is a relevant risk factors in the food industry due to the potential contamination of food products with pathogenic and spoilage microorganisms. The majority of bacteria are able to adhere and to form biofilms, where they can persist and survive for days to weeks or even longer, depending on the microorganism and the environmental conditions. The biological cycle of biofilms includes several developmental phases such as: initial attachment, maturation, maintenance, and dispersal. Bacteria in biofilms are generally well protected against environmental stress, consequently, extremely difficult to eradicate and detect in food industry. In the present manuscript, some techniques and compounds used to control and to prevent the biofilm formation are presented and discussed. Moreover, a number of novel techniques have been recently employed to detect and evaluate bacteria attached to surfaces, including real-time polymerase chain reaction (PCR), DNA microarray and confocal laser scanning microscopy. Better knowledge on the architecture, physiology and molecular signaling in biofilms can contribute for preventing and controlling food-related spoilage and pathogenic bacteria. The present study highlights basic and applied concepts important for understanding the role of biofilms in bacterial survival, persistence and dissemination in food processing environments.

The case for involvement of spiroplasma in the pathogenesis of transmissible spongiform encephalopathies

Spiroplasma biofilm formation explains the role of these wall-less bacteria in the pathogenesis of transmissible spongiform encephalopathies (TSEs). Spiroplasma embedded in the biofilm polysaccharide matrix are markedly resistant to physical and chemical treatment, simulating the biologic properties of the TSE agent. Microcolonies of spiroplasma embedded in biofilm bound to clay are the likely mechanism of lateral transmission of scrapie in sheep and chronic wasting disease in deer via soil ingestion. Spiroplasma in biofilm bound to the stainless steel of surgical instruments may also cause iatrogenic transmission of Creutzfeldt-Jakob disease. Sessile spiroplasma in biofilm attach to the surface by curli-like fibrils, a functional amyloid that is important for spiroplasma entering cells. Curli fibers have been shown to interact with host proteins and initiate formation of a potentially toxic amyloid that multiplies by self-assembly. In TSE, this mechanism may explain how spiroplasma trigger the formation of prion amyloid. This possibility is supported by experiments that show spiroplasma produce α-synuclein in mammalian tissue cultures. The data linking spiroplasma to neurodegenerative diseases provide a rationale for developing diagnostic tests for TSE based on the presence of spiroplasma-specific proteins or nucleic acid. Research efforts should focus on this bacterium for development of therapeutic regimens for Creutzfeldt-Jakob disease.

The influence of CsgD on the expression of genes of folate metabolism and hmp in Escherichia coli K-12

The csgD gene codes for the regulatory protein CsgD. CsgD upregulates the synthesis of the adhesive fimbriae, curli, that are important for biofilm formation and downregulates flagellar synthesis. We compared the expression of genes involved in folate metabolism and a gene (hmp) in strains with an intact csgD gene and with a deletion in csgD. The hmp gene codes a flavohemoglobin that inactivates nitric oxide. Expression was monitored by measuring light production from single copy lux operon fusions. At late times of growth, expression of genes responsible for methylene tetrahydrofolate synthesis (glyA and gcvTHP) and formyltetrahydrofolate recycling (purU) was higher in cells with CsgD than those without. In contrast, expression of hmp was lower in the presence of CsgD throughout the period monitored. We used a novel defined medium which should assist in defining nutritional factors that contribute to curli formation.

Engineering adherent bacteria by creating a single synthetic curli operon

The method described here consists in redesigning E. coli adherence properties by assembling the minimum number of curli genes under the control of a strong and metal-overinducible promoter, and in visualizing and quantifying the resulting gain of bacterial adherence. This method applies appropriate engineering principles of abstraction and standardization of synthetic biology, and results in the BBa_K540000 Biobrick (Best new Biobrick device, engineered, iGEM 2011). The first step consists in the design of the synthetic operon devoted to curli overproduction in response to metal, and therefore in increasing the adherence abilities of the wild type strain. The original curli operon was modified in silico in order to optimize transcriptional and translational signals and escape the "natural" regulation of curli. This approach allowed to test with success our current understanding of curli production. Moreover, simplifying the curli regulation by switching the endogenous complex promoter (more than 10 transcriptional regulators identified) to a simple metal-regulated promoter makes adherence much easier to control. The second step includes qualitative and quantitative assessment of adherence abilities by implementation of simple methods. These methods are applicable to a large range of adherent bacteria regardless of biological structures involved in biofilm formation. Adherence test in 24-well polystyrene plates provides a quick preliminary visualization of the bacterial biofilm after crystal violet staining. This qualitative test can be sharpened by the quantification of the percentage of adherence. Such a method is very simple but more accurate than only crystal violet staining as described previously with both a good repeatability and reproducibility. Visualization of GFP-tagged bacteria on glass slides by fluorescence or laser confocal microscopy allows to strengthen the results obtained with the 24-well plate test by direct observation of the phenomenon.

Infection of orthopedic implants with emphasis on bacterial adhesion process and techniques used in studying bacterial-material interactions

Staphylococcus comprises up to two-thirds of all pathogens in orthopedic implant infections and they are the principal causative agents of two major types of infection affecting bone: septic arthritis and osteomyelitis, which involve the inflammatory destruction of joint and bone. Bacterial adhesion is the first and most important step in implant infection. It is a complex process influenced by environmental factors, bacterial properties, material surface properties and by the presence of serum or tissue proteins. Properties of the substrate, such as chemical composition of the material, surface charge, hydrophobicity, surface roughness and the presence of specific proteins at the surface, are all thought to be important in the initial cell attachment process. The biofilm mode of growth of infecting bacteria on an implant surface protects the organisms from the host immune system and antibiotic therapy. The research for novel therapeutic strategies is incited by the emergence of antibiotic-resistant bacteria. This work will provide an overview of the mechanisms and factors involved in bacterial adhesion, the techniques that are currently being used studying bacterial-material interactions as well as provide insight into future directions in the field.

The bacterial thiopurine methyltransferase tellurite resistance process is highly dependent upon aggregation properties and oxidative stress response

Bacterial thiopurine methyltransferases (bTPMTs) can favour resistance towards toxic tellurite oxyanions through a pathway leading to the emission of a garlic-like smell. Gene expression profiling completed by genetic, physiological and electron microscopy analyses was performed to identify key bacterial activities contributing to this resistance process. Escherichia coli strain MG1655 expressing the bTPMT was used as a cell model in these experiments. This strain produced a garlic-like smell which was found to be due to dimethyl telluride, and cell aggregates in culture media supplemented with tellurite. Properties involved in aggregation were correlated with cell attachment to polystyrene, which increased with tellurite concentrations. Gene expression profiling supported a role of adhesins in the resistance process with 14% of the tellurite-regulated genes involved in cell envelope, flagella and fimbriae biogenesis. Other tellurite-regulated genes were, at 27%, involved in energy, carbohydrate and amino acid metabolism including the synthesis of antioxidant proteins, and at 12% in the synthesis of transcriptional regulators and signal transduction systems. Escherichia coli mutants impaired in tellurite-regulated genes showed ubiquinone and adhesins synthesis, oxidative stress response, and efflux to be essential in the bTPMT resistance process. High tellurite resistance required a synergistic expression of these functions and an efficient tellurium volatilization by the bTPMT.

Effects of subinhibitory concentrations of menthol on adaptation, morphological, and gene expression changes in enterohemorrhagic Escherichia coli

Menthol (C(10)H(20)O) possesses antibacterial activity; nevertheless, bacterial adaptation to this compound has never been studied. Here we report that precultivation of enterohemorrhagic Escherichia coli (EHEC) strains in increasing subinhibitory (SI) concentrations of menthol significantly elevates (4- to 16-fold) their resistance to menthol. Concomitant morphological alterations included the appearance of mucoid colonies and reduced biofilm production. Scanning electron microscopy (SEM) examination revealed suppressed curli formation in menthol-adapted cells. Expression of the gene cpsB10 (encoding one of the enzymes responsible for colanic acid production) was elevated in response to SI concentrations of menthol in a laboratory E. coli strain, whereas expression in an rcsC null mutant was reduced, implicating a partial role for the Rcs phosphorelay system in mediating the menthol signal. Adaptation to menthol also reduced expression of the locus of enterocyte effacement-encoded regulator (Ler). This reduction, together with reduced curli and biofilm formation and elevated mucoidity, suggests a general reduction in bacterial virulence following adaptation to menthol. Our results thus suggest menthol as a potential lead in the recently emerging alternative strategy of targeting bacterial virulence factors to develop new types of anti-infective agents.

Spiroplasma spp. biofilm formation is instrumental for their role in the pathogenesis of plant, insect and animal diseases

Spiroplasma spp. are important phyto and insect pathogens, and candidate causal agent/s of transmissible spongiform encephalopathies (TSE) in man and animals. These filterable wall-less bacteria are widely distributed in nature with an unspecified environmental reservoir. In this study we showed by scanning electron microscopy that spiroplasma form biofilm on an assortment of hard surfaces including mica, nickel and stainless steel. Spiroplasma were stuck to the surfaces by fibrillar threads consistent with curli fibers (an amyloid protein found in bacterial biofilms). After a lengthy time in cultures (6 weeks), spiroplasma in biofilm bound to mica disks lost their spiral shapes and formed coccoid forms interconnected by long (>2 μm) branched membranous nanotubules, therein representing direct conjugate connections between the cells. The affinity of spiroplasma biofilms for mica and nickel, and the membrane communications suggest that soil could be a reservoir for these bacteria. The persistence of clay bound spiroplasma in soil could serve as the mechanism of lateral spread of TSEs by ingestion of soil by ruminants. Spiroplasma binding to stainless steel wire supports bacterial contamination of surgical instruments following surgery on dementia patients as a mechanism of iatrogenic transmission of TSEs, especially with resistance of spiroplasma in biofilms to drying or exposure to 50% glutaraldehyde. The discovery of biofilm formation by spiroplasma addresses questions regarding environmental persistence of these organisms in nature and suggests novel mechanisms of intercellular communication and transmission.

The pyrimidine nucleotide biosynthetic pathway modulates production of biofilm determinants in Escherichia coli

Bacteria are often found in multicellular communities known as biofilms, which constitute a resistance form against environmental stresses. Extracellular adhesion and cell aggregation factors, responsible for bacterial biofilm formation and maintenance, are tightly regulated in response to physiological and environmental cues. We show that, in Escherichia coli, inactivation of genes belonging to the de novo uridine monophosphate (UMP) biosynthetic pathway impairs production of curli fibers and cellulose, important components of the bacterial biofilm matrix, by inhibiting transcription of the csgDEFG operon, thus preventing production of the biofilm master regulator CsgD protein. Supplementing growth media with exogenous uracil, which can be converted to UMP through the pyrimidine nucleotide salvage pathway, restores csgDEFG transcription and curli production. In addition, however, exogenous uracil triggers cellulose production, particularly in strains defective in either carB or pyrB genes, which encode enzymes catalyzing the first steps of de novo UMP biosynthesis. Our results indicate the existence of tight and complex links between pyrimidine metabolism and curli/cellulose production: transcription of the csgDEFG operon responds to pyrimidine nucleotide availability, while cellulose production is triggered by exogenous uracil in the absence of active de novo UMP biosynthesis. We speculate that perturbations in the UMP biosynthetic pathways allow the bacterial cell to sense signals such as starvation, nucleic acids degradation, and availability of exogenous pyrimidines, and to adapt the production of the extracellular matrix to the changing environmental conditions.

Modulation of metabolism and switching to biofilm prevail over exopolysaccharide production in the response of Rhizobium alamii to cadmium

Heavy metals such as cadmium (Cd(2+)) affect microbial metabolic processes. Consequently, bacteria adapt by adjusting their cellular machinery. We have investigated the dose-dependent growth effects of Cd(2+) on Rhizobium alamii, an exopolysaccharide (EPS)-producing bacterium that forms a biofilm on plant roots. Adsorption isotherms show that the EPS of R. alamii binds cadmium in competition with calcium. A metabonomics approach based on ion cyclotron resonance Fourier transform mass spectrometry has showed that cadmium alters mainly the bacterial metabolism in pathways implying sugars, purine, phosphate, calcium signalling and cell respiration. We determined the influence of EPS on the bacterium response to cadmium, using a mutant of R. alamii impaired in EPS production (MSΔGT). Cadmium dose-dependent effects on the bacterial growth were not significantly different between the R. alamii wild type (wt) and MSΔGT strains. Although cadmium did not modify the quantity of EPS isolated from R. alamii, it triggered the formation of biofilm vs planktonic cells, both by R. alamii wt and by MSΔGT. Thus, it appears that cadmium toxicity could be managed by switching to a biofilm way of life, rather than producing EPS. We conclude that modulations of the bacterial metabolism and switching to biofilms prevails in the adaptation of R. alamii to cadmium. These results are original with regard to the conventional role attributed to EPS in a biofilm matrix, and the bacterial response to cadmium.

RcnB is a periplasmic protein essential for maintaining intracellular Ni and Co concentrations in Escherichia coli

Nickel and cobalt are both essential trace elements that are toxic when present in excess. The main resistance mechanism that bacteria use to overcome this toxicity is the efflux of these cations out of the cytoplasm. RND (resistance-nodulation-cell division)- and MFS (major facilitator superfamily)-type efflux systems are known to export either nickel or cobalt. The RcnA efflux pump, which belongs to a unique family, is responsible for the detoxification of Ni and Co in Escherichia coli. In this work, the role of the gene yohN, which is located downstream of rcnA, is investigated. yohN is cotranscribed with rcnA, and its expression is induced by Ni and Co. Surprisingly, in contrast to the effect of deleting rcnA, deletion of yohN conferred enhanced resistance to Ni and Co in E. coli, accompanied by decreased metal accumulation. We show that YohN is localized to the periplasm and does not bind Ni or Co ions directly. Physiological and genetic experiments demonstrate that YohN is not involved in Ni import. YohN is conserved among proteobacteria and belongs to a new family of proteins; consequently, yohN has been renamed rcnB. We show that the enhanced resistance of rcnB mutants to Ni and Co and their decreased Ni and Co intracellular accumulation are linked to the greater efflux of these ions in the absence of rcnB. Taken together, these results suggest that RcnB is required to maintain metal ion homeostasis, in conjunction with the efflux pump RcnA, presumably by modulating RcnA-mediated export of Ni and Co to avoid excess efflux of Ni and Co ions via an unknown novel mechanism.

Plasma-assisted surface modification of organic biopolymers to prevent bacterial attachment

Despite many synthetic biomaterials having physical properties that are comparable or even superior to those of natural body tissues, they frequently fail due to the adverse physiological reactions they cause within the human body, such as infection and inflammation. The surface modification of biomaterials is an economical and effective method by which biocompatibility and biofunctionality can be achieved while preserving the favorable bulk characteristics of the biomaterial, such as strength and inertness. Amongst the numerous surface modification techniques available, plasma surface modification affords device manufacturers a flexible and environmentally friendly process that enables tailoring of the surface morphology, structure, composition, and properties of the material to a specific need. There are a vast range of possible applications of plasma modification in biomaterial applications, however, the focus of this review paper is on processes that can be used to develop surface morphologies and chemical structures for the prevention of adhesion and proliferation of pathogenic bacteria on the surfaces of in-dwelling medical devices. As such, the fundamental principles of bacterial cell attachment and biofilm formation are also discussed. Functional organic plasma polymerised coatings are also discussed for their potential as biosensitive interfaces, connecting inorganic/metallic electronic devices with their physiological environments.

In vitro transcription profiling of the σS subunit of bacterial RNA polymerase: re-definition of the σS regulon and identification of σS-specific promoter sequence elements

Specific promoter recognition by bacterial RNA polymerase is mediated by σ subunits, which assemble with RNA polymerase core enzyme (E) during transcription initiation. However, σ⁷⁰ (the housekeeping σ subunit) and σ^S (an alternative σ subunit mostly active during slow growth) recognize almost identical promoter sequences, thus raising the question of how promoter selectivity is achieved in the bacterial cell. To identify novel sequence determinants for selective promoter recognition, we performed run-off/microarray (ROMA) experiments with RNA polymerase saturated either with σ⁷⁰ (Eσ⁷⁰) or with σ^S (Eσ^S) using the whole Escherichia coli genome as DNA template. We found that Eσ⁷⁰, in the absence of any additional transcription factor, preferentially transcribes genes associated with fast growth (e.g. ribosomal operons). In contrast, Eσ^S efficiently transcribes genes involved in stress responses, secondary metabolism as well as RNAs from intergenic regions with yet-unknown function. Promoter sequence comparison suggests that, in addition to different conservation of the −35 sequence and of the UP element, selective promoter recognition by either form of RNA polymerase can be affected by the A/T content in the −10/+1 region. Indeed, site-directed mutagenesis experiments confirmed that an A/T bias in the −10/+1 region could improve promoter recognition by Eσ^S.

Virulence inhibition by zinc in shiga-toxigenic Escherichia coli

Previously, our laboratories reported that zinc inhibited expression of several important virulence factors in enteropathogenic Escherichia coli (EPEC) and reduced EPEC-induced intestinal damage in vivo. Since EPEC is genetically related to Shiga-toxigenic E. coli (STEC), we wondered whether the beneficial effects of zinc extended to STEC as well. Treatment options for STEC infection are very limited, since antibiotics tend to exacerbate disease via enhanced toxin production, so a safe intervention for this infection would be welcome. In this study, we report that in STEC strains zinc inhibits adherence to cultured cells as well as expression of EHEC secreted protein A (EspA). In addition, zinc inhibits the expression of Shiga toxin (Stx) at both the protein and the RNA level. Zinc inhibits basal and antibiotic-induced Stx production and inhibits both Stx1 and Stx2 by ≥90% at a concentration of 0.4 mM zinc. Rabbit EPEC strains were selected for acquisition of Stx-encoding bacteriophages, and these rabbit STEC strains (designated RDEC-H19A and E22-stx2) were used to test the effects of zinc in vivo in ligated rabbit intestinal loops. In vivo, zinc reduced fluid secretion into loops, inhibited mucosal adherence, reduced the amount of toxin in the loops, and reduced STEC-induced histological damage (villus blunting). Zinc has beneficial inhibitory effects against STEC strains that parallel those observed in EPEC. In addition, zinc strongly inhibits Stx expression; since Stx is responsible for the extraintestinal effects of STEC infection, such as hemolytic-uremic syndrome (HUS), zinc might be capable of preventing severe sequelae of STEC infection.

The Escherichia coli metallo-regulator RcnR represses rcnA and rcnR transcription through binding on a shared operator site: Insights into regulatory specificity towards nickel and cobalt

RcnA is an efflux pump responsible for Ni and Co detoxification in Escherichia coli. The expression of rcnA is induced by Ni and Co via the metallo-regulator RcnR. In the present work, the functioning of the promoter-operator region of rcnR and rcnA was investigated using primer extension and DNAse I footprinting experiments. We show that the promoters of rcnR and rcnA are convergent and that apo-RcnR binds on symmetrically located sequences in this intergenic region. Moreover, RcnR DNA binding is specifically modulated by one Ni or Co equivalent and not by other metals. In addition to rcnA, RcnR controls expression of its own gene in response to Ni and Co, but the two genes are differentially expressed.