Heavy-metal and benzalkonium chloride resistance of Listeria monocytogenes isolates from the environment of turkey-processing plants

Exploring the potential of essential oils against airborne fungi from cultural heritage conservation premises

The activity of six essential oils was investigated against eight fungal isolates (four Aspergillus and four Penicillium species) isolated from cultural heritage conservation premises in Serbia. To analyze the chemical composition of essential oils (EOs), gas chromatography coupled with mass spectrometry was employed. The antifungal activity of selected EOs was investigated using microdilution and microatmosphere methods while the commercial biocide benzalkonium chloride (BAC) was used as a control. Furthermore, molecular docking was used as an efficacious in silico method for the determination of interaction between dominant EO compounds and enzyme CYP51, essential for fungal ergosterol synthesis. It was demonstrated that BAC, Cinnamomum zeylanicum, and Gaultheria procumbens EOs had the strongest antifungal activity, which is in concordance with the results of molecular docking. Namely, the highest energy of enzyme-cofactor interaction was obtained for eugenol (the dominant component of Syzygium aromaticum and C. zeylanicum EOs). Moreover, it was found that the most resistant fungal isolates were A. flavus and A. niger, while A. sydowii and P. citrinum were the most susceptible. The results of our study point to the possibility of using studied environmentally friendly biocides of biological origin for the preservation of historical monuments and artifacts.

Phage-Based Control of Listeria innocua in the Food Industry: A Strategy for Preventing Listeria monocytogenes Persistence in Biofilms

Listeria innocua, though considered non-pathogenic, frequently coexists with Listeria monocytogenes in industrial environments, aiding its survival in biofilms. These biofilms pose a significant challenge in food processing facilities, as they protect bacteria from disinfectants and facilitate their spread. The aim of this review was to identify bacteriophages as a promising method for eliminating Listeria biofilms from the food industry. Lytic bacteriophages show great potential in combating Listeria biofilms. Commercially available products, such as PhageGuard Listex™ (P100) (Micreos Food Safety, Wageningen, The Netherlands), effectively reduce both L. monocytogenes and L. innocua in food products and on production surfaces. Additionally, phage-derived enzymes, such as endolysins, can degrade biofilms, eliminating bacteria without compromising food quality. The following article highlights that although bacteriophages present a promising biocontrol method, further research is necessary to assess their long-term effectiveness, particularly regarding bacterial resistance. To maximize efficacy, a combination of strategies such as phage cocktails and disinfectants is recommended to enhance biofilm eradication and minimize food contamination risks.

Variability in cadmium tolerance of closely related Listeria monocytogenes isolates originating from dairy processing environments

Increased tolerance to cadmium in Listeria monocytogenes has been suggested to contribute to their persistence in natural and food production environments. This study investigated the phenotypic cadmium response of L. monocytogenes strains with efflux pump cadAC (variants 1-4) and related strains with cadA1C1. Growth of cadAC variant strains (n = 5) in 0 µM-120 µM cadmium salts (CdCl2, CdSO4) in Mueller-Hinton broth (MHB) was evaluated. Additionally, 88 L. monocytogenes strains from dairy processing facilities were exposed to 43.8 µM CdCl2 in MHB, and their lag phase duration (LPD) was measured. Strains with cadA1 through cadA3 showed similar growth trends in the presence of cadmium, while the cadA4 variant (Scott A) had the highest CdCl2 minimum inhibitory concentration (175 µM). Growth varied between the two salts, with CdSO4 significantly increasing LPD (P < 0.05) compared to CdCl2. In 43.8 µM CdCl2, cadA1 strains displayed LPDs ranging from 0.99 ± 0.14 h to 6.44 ± 0.08 h, with no clear genomic differences explaining this variability. Strains without cadA did not grow at 43.8 µM CdCl2 but exhibited low tolerance (10.9 µM CdCl2), potentially due to non-specific soft metal ATPases (626 aa; 737 aa) and soft metal resistance proteins encoded by czc genes (289 aa; 291 aa; 303 aa) within their chromosomes. These findings enhance our understanding of L. monocytogenes cadmium tolerance and underscore the need for further research to explore the genetic and physiological factors underlying these trends.

IMPORTANCE

Mobile genetic elements in Listeria monocytogenes contribute to its survival in natural and food processing environments. This study focused on how different genetic variants of the efflux pump gene cadAC and group of closely related cadA1C1 strains respond to cadmium exposure. When exposed to two cadmium salts, cadmium chloride and cadmium sulfate, we observed varying growth patterns, with a significantly longer lag phase in cadmium sulfate compared to cadmium chloride. Strains with cadA1 to cadA3 had similar growth trends, whereas a strain with the cadA4 variant had the highest minimum inhibitory concentration value. Among 88 strains from dairy processing facilities, significant phenotypic differences were observed despite core genome similarities, indicating other underlying genetic and physiological factors contribute to cadmium tolerance. Since cadmium tolerance studies in L. monocytogenes are limited, with rare phenotypic comparisons between closely related strains, our study makes an important observation and contribution to understanding of L. monocytogenes tolerance to cadmium by providing phenotypic comparisons between numerous strains within the same clonal group (<16 single nucleotide polymorphisms).

Listeria monocytogenes in Fruits and Vegetables: Antimicrobial Resistance, Biofilm, and Genomic Insights

BACKGROUND/OBJECTIVES

Listeria monocytogenes is a foodborne pathogen that can infect both humans and animals and cause noninvasive gastrointestinal listeriosis or invasive listeriosis. The objectives of this study were to determine the genetic diversity of L. monocytogenes; the genes associated with its resistance to antibiotics, benzalkonium chloride (BC), and cadmium chloride (CdCl2); and its biofilm formation.

METHODS

A total of 132 fresh fruits (44 samples) and vegetables (88 samples) were selected for this study. The genetic diversity of the isolates and the genes associated with their antibiotic resistance were determined using PCR amplification; meanwhile, their levels of susceptibility to antibiotics were determined using the agar diffusion method. Their levels of resistance to BC and CdCl2 were determined using the minimum inhibitory concentration method, and their capacity for biofilm formation was evaluated using the crystal violet staining method.

RESULTS

A total of 17 L. monocytogenes strains were collected: 12.8% (17/132) from fresh fruits and vegetables in this study. The isolates of L. monocytogenes belonged to phylogenetic groups I.1 (29.4% (5/17); serotype 1/2a) and II.2 (70.5% (12/17); serotype 1/2b); strains containing Listeria pathogenicity islands (LIPIs) were also identified at prevalence rates of 100% for LIPI-1 and LIPI-2 (17/17), 29.4% for LIPI-3 (5/17), and 11.7% for LIPI-4 (2/17). The antibiotic susceptibility tests showed that the L. monocytogenes isolates exhibited six different multiresistant patterns, with multiple antibiotic resistance (MAR) index of ≥0.46 (70.5%; 12/17); additionally, the genes Ide, tetM, and msrA, associated with efflux pump Lde, tetracycline, and ciprofloxacin resistance, were detected at 52.9% (9/17), 29.4% (5/17), and 17.6% (3/17), respectively. The phenotypic tests showed that 58.8% (10/17) of cadmium-resistant L. monocytogenes isolates had a co-resistance of 23.5% (4/17) to BC. Finally, all strains of L. monocytogenes exhibited moderate biofilm production.

CONCLUSIONS

The results of this study contribute to our understanding of the persistence and genetic diversity of L. monocytogenes strains isolated from fresh fruits and vegetables; in addition, their resistance to CdCl2, which is correlated with co-resistance to BC disinfectant, is helpful for the food industry.

Biofilm formation by Listeria monocytogenes from the meat processing industry environment and the use of different combinations of detergents, sanitizers, and UV-A radiation to control this microorganism in planktonic and sessile forms

This study aimed to evaluate the ability of biofilm formation by L. monocytogenes from the meat processing industry environment, as well as the use of different combinations of detergents, sanitizers, and UV-A radiation in the control of this microorganism in the planktonic and sessile forms. Four L. monocytogenes isolates were evaluated and showed moderate ability to form biofilm, as well as carried genes related to biofilm production (agrB, agrD, prfA, actA, cheA, cheY, flaA, sigB), and genes related to tolerance to sanitizers (lde and qacH). The biofilm-forming isolates of L. monocytogenes were susceptible to quaternary ammonium compound (QAC) and peracetic acid (PA) in planktonic form, with minimum inhibitory concentrations of 125 and 75 ppm, respectively, for contact times of 10 and 5 min. These concentrations are lower than those recommended by the manufacturers, which are at least 200 and 300 ppm for QAC and PA, respectively. Biofilms of L. monocytogenes formed from a pool of isolates on stainless steel and polyurethane coupons were subjected to 14 treatments involving acid and enzymatic detergents, QAC and PA sanitizers, and UV-A radiation at varying concentrations and contact times. All treatments reduced L. monocytogenes counts in the biofilm, indicating that the tested detergents, sanitizers, and UV-A radiation exhibited antimicrobial activity against biofilms on both surface types. Notably, the biofilm formed on polyurethane showed greater tolerance to the evaluated compounds than the biofilm on stainless steel, likely due to the material's surface facilitating faster microbial colonization and the development of a more complex structure, as observed by scanning electron microscopy. Listeria monocytogenes isolates from the meat processing industry carry genes associated with biofilm production and can form biofilms on both stainless steel and polyurethane surfaces, which may contribute to their persistence within meat processing lines. Despite carrying sanitizer tolerance genes, QAC and PA effectively controlled these microorganisms in their planktonic form. However, combinations of detergent (AC and ENZ) with sanitizers (QAC and PA) at minimum concentrations of 125 ppm and 300 ppm, respectively, were the most effective.

Fitness Differences Between Listeria monocytogenes Serotypes 1/2a, 4b, and 4bv-1 in Competition for Growth on Lettuce Leaf Sections

Listeria monocytogenes is a foodborne pathogen that lives in nature as a saprophyte. Two of the three most common serotypes that cause foodborne listeriosis are 1/2a and 4b. Within serotype 4b, there is a variant called 4bv-1. In the last decade, several produce-related outbreaks (linked to leafy salad, caramel apples, and stone fruit) were linked to 4bv-1 strains, specifically those of Sequence Type 382. This study assessed the fitness of ST 382 strains on lettuce leaf sections to determine if they are more fit on produce than strains of other serotypes. Strains of serotypes 1/2a, 4b, and ST 382 were inoculated as mixtures onto lettuce and incubated at 4 °C for 7 days or 25 °C for 24 h. Thirty L. monocytogenes colonies resulting from the growth on each lettuce piece were characterized for serotype by multiplex PCR, and the percentages of each serotype recovered were compared. In the individual mixtures with three strains, none of the ST 382 strains showed better fitness for growth on lettuce at either 4 °C or 25 °C. Overall, ST 382 strains showed better recovery from lettuce sections grown at 4 °C than at 25 °C. Statistical analysis of the recovery of twelve strains tested in competition experiments indicated that ST 382 strains were less fit for lettuce growth when competing against the other serotypes. The data indicate that ST 382 strains do not have a competitive fitness advantage on cut lettuce sections.

Gene emrC Associated with Resistance to Quaternary Ammonium Compounds Is Common among Listeria monocytogenes from Meat Products and Meat Processing Plants in Poland

(1) Background: L. monocytogenes is a food pathogen of great importance, characterized by a high mortality rate. Quaternary ammonium compounds (QACs), such as benzalkonium chloride (BC), are often used as disinfectants in food processing facilities. The effectiveness of disinfection procedures is crucial to food safety. (2) Methods: A collection of 153 isolates of L. monocytogenes from meat processing industry was analyzed for their sensitivity to BC using the agar diffusion method. Genes of interest were detected with PCR. (3) Results: Genes emrC, bcrABC, and qacH were found in 64 (41.8%), 6 (3.9%), and 1 isolate (0.7%), respectively, and 79 isolates (51.6%) were classified as having reduced sensitivity to BC. A strong correlation between carrying QACs resistance-related genes and phenotype was found (p-value < 0.0001). Among 51 isolates originating from bacon (collected over 13 months), 48 had the emrC gene, which could explain their persistent presence in a processing facility. Isolates with the ilsA gene (from LIPI-3) were significantly (p-value 0.006) less likely to carry QACs resistance-related genes. (4) Conclusions: Reduced sensitivity to QACs is common among L. monocytogenes from the meat processing industry. Persistent presence of these bacteria in a processing facility is presumably caused by emrC-induced QACs resistance.

Genetic diversity of Listeria monocytogenes from seafood products, its processing environment, and clinical origin in the Western Cape, South Africa using whole genome sequencing

Listeria monocytogenes is a concern in seafood and its food processing environment (FPE). Several outbreaks globally have been linked to various types of seafood. Genetic profiling of L. monocytogenes is valuable to track bacterial contamination throughout the FPE and in understanding persistence mechanisms, with limited studies from South Africa. Forty-six L. monocytogenes isolates from origins: Fish/seafood products (n = 32) (salmon, smoked trout, fresh hake, oysters), the FPE (n = 6), and clinical (n = 8) were included in this study. Lineage typing, antibiotic susceptibility testing, and screening for two genes (bcrABC and emrC) conferring sanitizer tolerance was conducted. The seafood and FPE isolates originated from seven different factories processing various seafood products with undetermined origin. All clinical isolates were categorized as lineage I, and seafood and FPE isolates were mostly categorized into lineage II (p < 0.01). Seafood and FPE isolates (53%) carried the bcrABC gene cassette and one fish isolate, the emrC gene. A subset, n = 24, was grouped into serotypes, sequence types (STs), and clonal complexes (CCs) with whole genome sequencing (WGS). Eight CCs and ten STs were identified. All clinical isolates belonged to serogroup 4b, hypervirulent CC1. CC121 was the most prevalent in isolates from food and the FPE. All isolates carried Listeria pathogenicity islands (LIPI) 1 and 2. LIPI-3 and LIPI-4 were found in certain isolates. We identified genetic determinants linked to enhanced survival in the FPE, including stress survival islets (SSI) and genes conferring tolerance to sanitizers. SSI-1 was found in 44% isolates from seafood and the FPE. SSI-2 was found in all the ST121 seafood isolates. Isolates (42%) harbored transposon Tn1688_qac (ermC), conferring tolerance to quaternary ammonium compounds. Five plasmids were identified in 13 isolates from seafood and the FPE. This is the first One Health study reporting on L. monocytogenes genetic diversity, virulence and resistance profiles from various types of seafood and its FPE in South Africa.

Salinity-mediated enhancement of quaternary ammonium compounds resistance and removal in endophytic bacteria LSE01

The widespread usage of quaternary ammonium compounds (QACs) as disinfectants during the COVID-19 pandemic poses significant environmental risks, such as toxicity to organisms and the emergence of superbugs. In this study, different inorganic salts (NaCl, KCl, CaCl2, MgCl2) were used to induce endophytes LSE01 isolated from hyperaccumulating plants. After five generations of cultivation under 80 g/L NaCl, the minimum inhibitory concentration (MIC) of LSE01 to QACs increased by about 3-fold, while its degradation extent increased from 8% to 84% for C12BDMA-Cl and 5%-89% for C14BDMA-Cl. Transmission electron microscopy (TEM) and three-dimensional fluorescence spectra indicated that the cells induced by high concentration of salt caused plasmolysis and secreted more bound extracellular polymeric substances (B-EPS); these changes are likely to be an important reason for the observed increased resistance and enhanced degradation extent of LSE01 to QACs. Our findings suggest that salt-induction could be an effective way to enhance the resistance and removal of toxic organic pollutants by functional microorganisms.

Polyphenols: Natural Preservatives with Promising Applications in Food, Cosmetics and Pharma Industries; Problems and Toxicity Associated with Synthetic Preservatives; Impact of Misleading Advertisements; Recent Trends in Preservation and Legislation

The global market of food, cosmetics, and pharmaceutical products requires continuous tracking of harmful ingredients and microbial contamination for the sake of the safety of both products and consumers as these products greatly dominate the consumer's health, directly or indirectly. The existence, survival, and growth of microorganisms in the product may lead to physicochemical degradation or spoilage and may infect the consumer at another end. It has become a challenge for industries to produce a product that is safe, self-stable, and has high nutritional value, as many factors such as physical, chemical, enzymatic, or microbial activities are responsible for causing spoilage to the product within the due course of time. Thus, preservatives are added to retain the virtue of the product to ensure its safety for the consumer. Nowadays, the use of synthetic/artificial preservatives has become common and has not been widely accepted by consumers as they are aware of the fact that exposure to preservatives can lead to adverse effects on health, which is a major area of concern for researchers. Naturally occurring phenolic compounds appear to be extensively used as bio-preservatives to prolong the shelf life of the finished product. Based on the convincing shreds of evidence reported in the literature, it is suggested that phenolic compounds and their derivatives have massive potential to be investigated for the development of new moieties and are proven to be promising drug molecules. The objective of this article is to provide an overview of the significant role of phenolic compounds and their derivatives in the preservation of perishable products from microbial attack due to their exclusive antioxidant and free radical scavenging properties and the problems associated with the use of synthetic preservatives in pharmaceutical products. This article also analyzes the recent trends in preservation along with technical norms that regulate the food, cosmetic, and pharmaceutical products in the developing countries.

Impact of benzalkonium chloride, benzethonium chloride and chloroxylenol on bacterial antimicrobial resistance

This review examined 3655 articles on benzalkonium chloride (BKC), benzethonium chloride (BZT) and chloroxylenol (CHO) aiming to understand their impact on antimicrobial resistance. Following the application of inclusion/exclusion criteria, only 230 articles were retained for analysis; 212 concerned BKC, with only 18 for CHO and BZT. Seventy-eight percent of studies used MIC to measure BKC efficacy. Very few studies defined the term 'resistance' and 85% of studies defined 'resistance' as <10-fold increase (40% as low as 2-fold) in MIC. Only a few in vitro studies reported on formulated products and when they did, products performed better. In vitro studies looking at the impact of BKC exposure on bacterial resistance used either a stepwise training protocol or exposure to constant BKC concentrations. In these, BKC exposure resulted in elevated MIC or/and MBC, often associated with efflux, and at time, a change in antibiotic susceptibility profile. The clinical relevance of these findings was, however, neither reported nor addressed. Of note, several studies reported that bacterial strains with an elevated MIC or MBC remained susceptible to the in-use BKC concentration. BKC exposure was shown to reduce bacterial diversity in complex microbial microcosms, although the clinical significance of such a change has not been established. The impact of BKC exposure on the dissemination of resistant genes (notably efflux) remains speculative, although it manifests that clinical, veterinary and food isolates with elevated BKC MIC carried multiple efflux pump genes. The correlation between BKC usage and gene carriage, maintenance and dissemination has also not been established. The lack of clinical interpretation and significance in these studies does not allow to establish with certainty the role of BKC on AMR in practice. The limited literature and BZT and CHO do not allow to conclude that these will impact negatively on emerging bacterial resistance in practice.

Microbial resistance to sanitizers in the food industry: review

Hygiene programs which comprise the cleaning and sanitization steps are part of the Good Hygiene Practices (GHP) and are considered essential to ensure food safety and quality. Inadequate hygiene practices may contribute to the occurrence of foodborne diseases, development of microbial resistance to sanitizers, and economic losses. In general, the sanitizer resistance is classified as intrinsic or acquired. The former is an inherent characteristic, naturally present in some microorganisms, whereas the latter is linked to genetic modifications that can occur at random or after continuous exposure to a nonnormal condition. The resistance mechanisms can involve changes in membrane permeability or in the efflux pump, and enzymatic activity. The efflux pump mechanism is the most elucidated in relation to the resistance caused by the use of different types of sanitizers. In addition, microbial resistance to sanitizers can also be favored in the presence of biofilms due to the protection given by the glycocalyx matrix and genetic changes. Therefore, this review aimed to show the main microbial resistance mechanisms to sanitizers, including genetic modifications, biofilm formation, and permeability barrier.

Listeria monocytogenes - How This Pathogen Survives in Food-Production Environments?

The foodborne pathogen Listeria monocytogenes is the causative agent of human listeriosis, a severe disease, especially dangerous for the elderly, pregnant women, and newborns. Although this infection is comparatively rare, it is often associated with a significant mortality rate of 20-30% worldwide. Therefore, this microorganism has an important impact on food safety. L. monocytogenes can adapt, survive and even grow over a wide range of food production environmental stress conditions such as temperatures, low and high pH, high salt concentration, ultraviolet lights, presence of biocides and heavy metals. Furthermore, this bacterium is also able to form biofilm structures on a variety of surfaces in food production environments which makes it difficult to remove and allows it to persist for a long time. This increases the risk of contamination of food production facilities and finally foods. The present review focuses on the key issues related to the molecular mechanisms of the pathogen survival and adaptation to adverse environmental conditions. Knowledge and understanding of the L. monocytogenes adaptation approaches to environmental stress factors will have a significant influence on the development of new, efficient, and cost-effective methods of the pathogen control in the food industry, which is critical to ensure food production safety.

Prevalence and Clonal Diversity of over 1,200 Listeria monocytogenes Isolates Collected from Public Access Waters near Produce Production Areas on the Central California Coast during 2011 to 2016

A 5-year survey of public access surface waters in an agricultural region of the Central California Coast was done to assess the prevalence of the foodborne pathogen Listeria monocytogenes. In nature, L. monocytogenes lives as a saprophyte in soil and water, which are reservoirs for contamination of preharvest produce. Moore swabs were deployed biweekly in lakes, ponds, streams, and rivers during 2011 to 2016. L. monocytogenes was recovered in 1,224 of 2,922 samples, resulting in 41.9% prevalence. Multiple subtypes were isolated from 97 samples, resulting in 1,323 L. monocytogenes isolates. Prevalence was higher in winter and spring and after rain events in some waterways. Over 84% of the isolates were serotype 4b. Whole-genome sequencing was done on 1,248 isolates, and in silico multilocus sequence typing revealed 74 different sequence types (STs) and 39 clonal complexes (CCs). The clones most isolated, CC639, CC183, and CC1, made up 27%, 19%, and 13%, respectively, of the sequenced isolates. Other types were CC663, CC6, CC842, CC4, CC2, CC5, and CC217. All sequenced isolates contained intact copies of core L. monocytogenes virulence genes, and pathogenicity islands LIPI-3 and LIPI-4 were identified in 73% and 63%, respectively, of the sequenced isolates. The virulence factor internalin A was predicted to be intact in all but four isolates, while genes important for sanitizer and heavy metal resistance were found in <5% of the isolates. These waters are not used for crop irrigation directly, but they are available to wildlife and can flood fields during heavy rains. IMPORTANCE Listeria monocytogenes serotype 4b and 1/2a strains are implicated in most listeriosis, and hypervirulent listeriosis stems from strains containing pathogenicity islands LIPI-3 and LIPI-4. The waters and sediments in the Central California Coast agricultural region contain widespread and diverse L. monocytogenes populations, and all the isolates contain intact virulence genes. Emerging clones CC183 and CC639 were the most abundant clones, and major clones CC1, CC4, and CC6 were well represented. CC183 was responsible for three produce-related outbreaks in the last 7 years. Most of the isolates in the survey differ from those of lesser virulence that are often isolated from foods and food processing plants because they contain genes encoding an intact virulence factor, internalin A, and most did not contain genes for sanitizer and heavy metal resistance. This isolate collection is important for understanding L. monocytogenes populations in agricultural and natural regions.

Role of horizontally transferred copper resistance genes in Staphylococcus aureus and Listeria monocytogenes

Bacteria have evolved mechanisms which enable them to control intracellular concentrations of metals. In the case of transition metals, such as copper, iron and zinc, bacteria must ensure enough is available as a cofactor for enzymes whilst at the same time preventing the accumulation of excess concentrations, which can be toxic. Interestingly, metal homeostasis and resistance systems have been found to play important roles in virulence. This review will discuss the copper homeostasis and resistance systems in Staphylococcus aureus and Listeria monocytogenes and the implications that acquisition of additional copper resistance genes may have in these pathogens.

Evaluation of the Persistence and Characterization of Listeria monocytogenes in Foodservice Operations

Listeria monocytogenes is a major foodborne pathogen that can contaminate food products and colonize food-producing facilities. Foodservice operations (FSOp) are frequently responsible for foodborne outbreaks due to food safety practices failures. We investigated the presence of and characterized L. monocytogenes from two FSOp (cafeterias) distributing ready-to-eat meals and verified FSOp’s compliance with good manufacturing practices (GMP). Two facilities (FSOp-A and FSOp-B) were visited three times each over 5 months. We sampled foods, ingredients, and surfaces for microbiological analysis, and L. monocytogenes isolates were characterized by phylogenetic analyses and phenotypic characteristics. GMP audits were performed in the first and third visits. A ready-to-eat salad (FSOp-A) and a frozen ingredient (FSOp-B) were contaminated with L. monocytogenes, which was also detected on Zone 3 surfaces (floor, drains, and a boot cover). The phylogenetic analysis demonstrated that FSOp-B had persistent L. monocytogenes strains, but environmental isolates were not closely related to food or ingredient isolates. GMP audits showed that both operations worked under “fair” conditions, and “facilities and equipment” was the section with the least compliances. The presence of L. monocytogenes in the environment and GMP failures could promote food contamination with this pathogen, presenting a risk to consumers.

Landscape of Stress Response and Virulence Genes Among Listeria monocytogenes Strains

The pathogenic microorganism Listeria monocytogenes is ubiquitous and responsible for listeriosis, a disease with a high mortality rate in susceptible people. It can persist in different habitats, including the farm environment, the food production environments, and in foods. This pathogen can grow under challenging conditions, such as low pH, low temperatures, and high salt concentrations. However, L. monocytogenes has a high degree of strain divergence regarding virulence potential, environmental adaption, and stress response. This review seeks to provide the reader with an up-to-date overview of clonal and serotype-specific differences among L. monocytogenes strains. Emphasis on the genes and genomic islands responsible for virulence and resistance to environmental stresses is given to explain the complex adaptation among L. monocytogenes strains. Moreover, we highlight the use of advanced diagnostic technologies, such as whole-genome sequencing, to fine-tune quantitative microbiological risk assessment for better control of listeriosis.

Genetic relationships and biofilm formation of Listeria monocytogenes isolated from the smoked salmon industry

Among pathogens, L. monocytogenes has the capability to persist on Food Processing Environment (FPE), first of all posing safety issues, then economic impact on productivity. The aim of this work was to determine the influence of biofilm forming-ability and molecular features on the persistence of 19 Listeria monocytogenes isolates obtained from FPE, raw and processed products of a cold-smoked salmon processing plant. To verify the phenotypic and genomic correlations among the isolates, different analyses were employed: serotyping, Clonal Complex (CC), core genome Multi-Locus Sequence Typing (cgMLST) and Single Nucleotide Polymorphisms (SNPs) clustering, and evaluation of the presence of virulence- and persistence-associated genes. From our results, the biofilm formation was significantly higher (*P < 0.05) at 37 °C, compared to 30 and 12 °C, suggesting a temperature-dependent behaviour. Moreover, the biofilm-forming ability showed a strain-specific trend, not correlated with CC or with strains persistence. Instead, the presence of internalin (inL), Stress Survival Islet (SSI) and resistance to erythromycin (ermC) genes was correlated with the ability to produce biofilms. Our data demonstrate that the genetic profile influences the adhesion capacity and persistence of L. monocytogenes in food processing plants and could be the result of environmental adaptation in response to the external selective pressure.

Harnessing Whole Genome Sequence Data for Facility-Specific Signatures for Listeria monocytogenes: A Case Study With Turkey Processing Plants in the United States

Listeria monocytogenes is a Gram-positive foodborne pathogen responsible for the severe disease listeriosis and notorious for its ability to persist in food processing plants, leading to contamination of processed, ready-to-eat foods. L. monocytogenes persistence in various food processing environments (FPEs) has been extensively investigated by various subtyping tools, with increasing use of whole genome sequencing (WGS). However, major knowledge gaps remain. There is a need for facility-specific molecular signatures not only for adequate attribution of L. monocytogenes to a specific FPE but also for improved understanding of the ecology and evolution of L. monocytogenes in the food processing ecosystem. Furthermore, multiple strains can be recovered from a single FPE sample, but their diversity can be underestimated with common molecular subtyping tools. In this study we investigated a panel of 54 L. monocytogenes strains from four turkey processing plants in the United States. A combination of WGS and phenotypic assays was employed to assess strain persistence as well as identify facility-specific molecular signatures. Comparative analysis of allelic variation across the whole genome revealed that allelic profiles have the potential to be specific to individual processing plants. Certain allelic profiles remained associated with individual plants even when closely-related strains from other sources were included in the analysis. Furthermore, for certain sequence types (STs) based on the seven-locus multilocus sequence typing scheme, presence and location of premature stop codons in inlA, inlB length, prophage sequences, and the sequence content of a genomic hotspot could serve as plant-specific signatures. Interestingly, the analysis of different isolates from the same environmental sample revealed major differences not only in serotype and ST, but even in the sequence content of strains of the same ST. This study highlights the potential for WGS data to be deployed for identification of facility-specific signatures, thus facilitating the tracking of strain movement through the food chain. Furthermore, deployment of WGS for intra-sample strain analysis allows for a more complete environmental surveillance of L. monocytogenes in food processing facilities, reducing the risk of failing to detect strains that may be clinically relevant and potentially novel.

Investigating Transcriptomic Induction of Resistance and/or Virulence in Listeria monocytogenes Cells Surviving Sublethal Antimicrobial Exposure

The potential transcriptomic induction of resistance and/or virulence in two L. monocytogenes strains belonging to the most frequent listeriosis-associated serovars (i.e., 1/2a and 4b), following their sublethal antimicrobial exposure, was studied through qPCR determination of the relative expression of 10 selected related genes (i.e., groEL, hly, iap, inlA, inlB, lisK, mdrD, mdrL, prfA, and sigB). To induce sublethal stress, three common antimicrobials (i.e., benzalkonium chloride, thymol, and ampicillin) were individually applied for 2 h at 37 °C against stationary phase cells of each strain, each at a sublethal concentration. In general, the expression of most of the studied genes remained either stable or was significantly downregulated following the antimicrobial exposure, with some strain-specific differences to be yet recorded. Thymol provoked downregulation of most of the studied genes, significantly limiting the expression of 6/10 and 4/10 genes in the strains of ser. 1/2a and ser. 4b, respectively, including those coding for the master regulators of stress response and virulence (SigB and PrfA, respectively), in both strains. At the same time, the two genes coding for the invasion internalin proteins (InlA and InlB), with crucial role in the onset of L. monocytogenes pathogenesis, were both importantly upregulated in ser. 4b strain. The results obtained increase our knowledge of the stress physiology of L. monocytogenes under certain sublethal antimicrobial conditions that could be encountered within the food chain and in clinical settings, and may assist in better and more effective mitigation strategies.

Plasmidome of Listeria spp.-The repA-Family Business

Bacteria of the genus Listeria (phylum Firmicutes) include both human and animal pathogens, as well as saprophytic strains. A common component of Listeria spp. genomes are plasmids, i.e., extrachromosomal replicons that contribute to gene flux in bacteria. This study provides an in-depth insight into the structure, diversity and evolution of plasmids occurring in Listeria strains inhabiting various environments under different anthropogenic pressures. Apart from the components of the conserved plasmid backbone (providing replication, stable maintenance and conjugational transfer functions), these replicons contain numerous adaptive genes possibly involved in: (i) resistance to antibiotics, heavy metals, metalloids and sanitizers, and (ii) responses to heat, oxidative, acid and high salinity stressors. Their genomes are also enriched by numerous transposable elements, which have influenced the plasmid architecture. The plasmidome of Listeria is dominated by a group of related replicons encoding the RepA replication initiation protein. Detailed comparative analyses provide valuable data on the level of conservation of these replicons and their role in shaping the structure of the Listeria pangenome, as well as their relationship to plasmids of other genera of Firmicutes, which demonstrates the range and direction of flow of genetic information in this important group of bacteria.

Control of Virulent Listeria monocytogenes Originating from Dairy Products and Cattle Environment Using Marine Algal Extracts, Silver Nanoparticles Thereof, and Quaternary Disinfectants

Introduction

Listeria monocytogenes is an important foodborne pathogen of public- and animal-health concern globally. The persistence of L. monocytogenes in the dairy-processing environment has multifactorial causes, including lack of hygiene, inefficient cleaning, and improper disinfection practices.

Materials and Methods

A total of 300 dairy-product and environmental samples were collected from dairy-cattle facilities and local dairy shops and vendors in Qena, Egypt. Samples were screened for the incidence of Listeria spp. and to detect virulence determinants and disinfectant-resistance genes. Three marine algal species - Caulerpa racemosa, Jania rubens, and Padina pavonica - were collected from Hurghada on the Red Sea coast. Algal extracts were screened using gas chromatography-mass spectrometry. The antimicrobial activity of some marine algal extracts, nanoparticles derived therefrom, and some disinfectants against L. monocytogenes strains were assessed in vitro using agar-well diffusion and liquid-broth methods. The impact of P. pavonica extract on the growth and survival of virulent L. monocytogenes in cheese and whey were clarified.

Results and Discussion

The incidence of L. monocytogenes in dairy products and environmental samples was 15.5% and 19%, respectively. The most common toxigenic gene profile found among the isolates was hlyA ⁺-inlA ⁺-prfA ⁺. The sensitivity pattern of L. monocytogenes strains to disinfectant containing alkyl (C_12-16) dimethyl BAC was high compared to other tested quaternary ammonium compounds (QAC) disinfectants tested, which showed lower log reductions against resistant strains. The QAC disinfectant-resistance gene qacH was detected in 40% of the isolates. Potent bactericidal activity of a petroleum ether extract of P. pavonica and silver nanoparticles of P. pavonica were obtained against the virulent L. monocytogenes strain. The population of L. monocytogenes in cheese curd and whey after 14 days was reduced at a rate of 9 log CFU/g and 8 log CFU/mL, respectively due to the effect of P. pavonica extract. After 28 days of storage, L. monocytogenes was completely inactivated in those dairy products.

Conclusion

P. pavonica extract showed promising antimicrobial properties, calling for further comprehensive studies prior to it being applied in the food industry to enhance the safety, quality, and shelf life of products and protect public health.

Function and distribution of the conjugative plasmid pLM1686 in foodborne Listeria monocytogenes in China

Listeria monocytogenes, a fatal foodborne pathogen has the extraordinary capacity to survive in harsh conditions and is a potential threat to public health. A novel 91 kb plasmid pLM1686 was found in the prevalent L. monocytogenes sequence type (ST) 87 strain in China. In this study, the function and distribution of pLM1686 were firstly investigated in L. monocytogenes. The results showed plasmid pLM1686 had self-transmissible ability and existed in various types of L. monocytogenes isolates belonging to two lineages (lineage I and II), four serotypes (1/2b, 3b, 1/2c and 1/2a) and four STs (ST87, ST59, ST9 and ST120). The wild strain LM1686 and transconjugant strain 10403S_P1686 exhibited significantly higher growth rate and biofilm formation in Modification of Welshimer's medium (MWB), greater salinity tolerance, stronger cell invasion and higher cytotoxicity than plasmid-cured strain and reference strain 10403S. Moreover, plasmid curing caused the loss of cadmium resistance of strain, and the recipient strain acquired cadmium resistance after conjugation. Thus, pLM1686 would provide L. monocytogenes advantages of surviving in adverse environments.

Characterisation of Listeria monocytogenes food-associated isolates to assess environmental fitness and virulence potential

The ability of Listeria monocytogenes isolates to survive within the food production environment (FPE), as well as virulence, varies greatly between strains. There are specific genetic determinants that have been identified which can strongly influence a strains ability to survive in the FPE and/or within human hosts. In this study, we assessed the FPE fitness and virulence potential, including efficacy of selected hygiene or treatment intervention, against 52 L. monocytogenes strains isolated from various food and food environment sources. Phenotypic tests were performed to determine the minimum inhibitory concentration of cadmium chloride and benzalkonium chloride and the sensitivities to five clinically relevant antibiotics. A genomic analysis was also performed to identify resistance genes correlating to the observed phenotypic resistance profiles, along with genetic determinants of interest which may elude to the FPE fitness and virulence potential. A transposon element containing a novel cadmium resistance gene, cadA7, a Tn916 variant insert in the hypervariable Listeria genomic island 1 region and an LGI2 variant were identified. Resistance to cadmium and disinfectants was prevalent among isolates in this study, although no resistance to clinically important antimicrobials was observed. Potential hypervirulent strains containing full length inlA, LIPI-1 and LIPI-3 were also identified in this study. Cumulatively, the results of this study show a vast array of FPE survival and pathogenicity potential among food production-associated isolates, which may be of concern for food processing operators and clinicians regarding L. monocytogenes strains colonising and persisting within the FPE, and subsequently contaminating food products then causing disease in at risk population groups.

Identification and Characterization of a Novel Genomic Island Harboring Cadmium and Arsenic Resistance Genes in Listeria welshimeri

Listeria monocytogenes, the bacterial foodborne pathogen responsible for the severe disease listeriosis, frequently exhibits heavy metal resistance. Concurrent resistance to cadmium and arsenic in L. monocytogenes is strongly associated with the 35-kb chromosomal island LGI2. LGI2 has been encountered repeatedly among L. monocytogenes serotype 4b hypervirulent clones but, surprisingly, not among non-pathogenic Listeria spp. Here we describe a novel LGI2 variant, LGI2-3, in two L. welshimeri strains from an urban aquatic environment. Whole genome sequence analysis revealed that the genomes were closely related except for one prophage region and confirmed a chromosomally integrated LGI2-3. It harbored a cystathionine beta-lyase gene previously only encountered in LGI2-1 of L. monocytogenes clonal complex 1 but was otherwise most closely related to LGI2. LGI2-3 harbored a novel cadAC cassette (cadA7C7) that, like LGI2's cadA4C4, was associated with lower-level tolerance to cadmium (MIC 50 μg/mL) than other cadAC cassettes (MIC ≥ 140 μg/mL). CadA sequence analysis identified two amino acids that may be important for mediating different levels of cadmium tolerance. Our findings clearly demonstrated the potential for LGI2-like islands to be harbored by non-pathogenic Listeria spp. and generate intriguing hypotheses on the genetic diversity mediated by this island and its transfer among Listeria spp.

Genomic insights into persistence of Listeria species in the food processing environment

AIMS

Listeria species may colonize and persist in food processing facilities for prolonged periods of time, despite hygiene interventions in place. To understand the genetic factors contributing to persistence of Listeria strains, this study undertook a comparative analysis of seven persistent and six presumed non-persistent strains, isolated from a single food processing environment, to identify genetic markers correlating to promoting persistence of Listeria strains, through whole genome sequence analysis.

METHODS AND RESULTS

A diverse pool of genetic markers relevant to hygiene tolerance was identified, including disinfectant resistance markers qacH, emrC and the efflux cassette bcrABC. Both persistent and presumed non-persistent cohorts encoded a range of stress resistance markers, including heavy metal resistance, oxidative and pH stress, although trends were associated with each cohort (e.g., qacH and cadA1C resistance was more frequently found in persistent isolates). Persistent isolates were more likely to contain mutations associated with attenuated virulence, including a truncated InlA. Plasmids and transposons were widespread between cohorts.

CONCLUSIONS

Results suggest that no single genetic marker identified was universally responsible for a strain's ability to persist. Persistent strains were more likely to harbour mutation associated with hypovirulence.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study provides additional insights into the distribution of genetic elements relevant to persistence across Listeria species, as well as strain virulence potential.

Benzalkonium chloride and heavy metal resistance profiles of Listeria monocytogenes strains isolated from fish, fish products and food-producing factories in Poland

Phenotypic and genotypic resistance to benzalkonium chloride (BC), cadmium and arsenic was tested (by susceptibility assays and molecular methods) in 287 Listeria monocytogenes strains isolated from fish and fish products, and food-producing factories in Poland. Overall, 40% of the isolates were resistant to BC, 56% to cadmium and 41% to arsenic (57% displayed resistance to more than one of the tested compounds). Among BC-resistant isolates, the most commonly detected resistance determinant was the qacH gene (83%). Three distinct types of cadA gene determining resistance to cadmium were detected, with the cadA1 variant predominant (88%), while most arsenic-resistant isolates (86%) harbored the arsA gene associated with a Tn554-like transposon (one strain harbored two copies of arsA in different arsenic resistance cassettes). 53% of all tested isolates contained plasmids (from 4 kb to > 90 kb in size), which were classified into 11 groups (p1-p11) based on their restriction patterns. Interestingly, 12 isolates harbored the small mobilizable pLMST6-like plasmid pLIS3 encoding multidrug efflux pump EmrC. Clustering analysis of PFGE patterns revealed that these isolates represent several diverse bacterial populations, which strongly suggests mobility of the pLMST6-like plasmids among L. monocytogenes strains and their role in dissemination of BC resistance.

Hypo- and Hyper-Virulent Listeria monocytogenes Clones Persisting in Two Different Food Processing Plants of Central Italy

A total of 66 Listeria monocytogenes (Lm) isolated from 2013 to 2018 in a small-scale meat processing plant and a dairy facility of Central Italy were studied. Whole Genome Sequencing and bioinformatics analysis were used to assess the genetic relationships between the strains and investigate persistence and virulence abilities. The biofilm forming-ability was assessed in vitro. Cluster analysis grouped the Lm from the meat plant into three main clusters: two of them, both belonging to CC9, persisted for years in the plant and one (CC121) was isolated in the last year of sampling. In the dairy facility, all the strains grouped in a CC2 four-year persistent cluster. All the studied strains carried multidrug efflux-pumps genetic determinants (sugE, mdrl, lde, norM, mepA). CC121 also harbored the Tn6188 specific for tolerance to Benzalkonium Chloride. Only CC9 and CC121 carried a Stress Survival Islet and presented high-level cadmium resistance genes (cadA1C1) carried by different plasmids. They showed a greater biofilm production when compared with CC2. All the CC2 carried a full-length inlA while CC9 and CC121 presented a Premature Stop Codon mutation correlated with less virulence. The hypo-virulent clones CC9 and CC121 appeared the most adapted to food-processing environments; however, even the hyper-virulent clone CC2 warningly persisted for a long time. The identification of the main mechanisms promoting Lm persistence in a specific food processing plant is important to provide recommendations to Food Business Operators (FBOs) in order to remove or reduce resident Lm.

Tolerance of Listeria monocytogenes to biocides used in food processing environments

Listeria monocytogenes is a foodborne pathogen that causes a life-threatening disease in humans known as listeriosis. Contamination of food during processing is the main route of transmission of Listeria monocytogenes. Therefore, biocides play a crucial role in food processing environments as they act as the first line of defense in the prevention and control of L. monocytogenes. Residues of biocides may be present at sublethal concentrations after disinfection. This, unfortunately, subjects L. monocytogenes to selection pressure, giving rise to tolerant strains, which pose a threat to food safety and public health. This review will give a brief description of L. monocytogenes, the clinical manifestation, treatment of listeriosis as well as recently recorded outbreaks. The article will then discuss the current literature on the ability of L. monocytogenes strains to tolerate biocides especially quaternary ammonium compounds as well as the mechanisms of tolerance towards biocides including the activation of efflux pump systems.

Comparative Analysis of Genetic Determinants Encoding Cadmium, Arsenic, and Benzalkonium Chloride Resistance in Listeria monocytogenes of Human, Food, and Environmental Origin

Environmental adaptation of Listeria monocytogenes is a complex process involving various mechanisms that can contribute to their survival in the environment, further spreading throughout the food chain and the development of listeriosis. The aim of this study was to analyze whole-genome sequencing data in a set of 270 strains of L. monocytogenes derived from human listeriosis cases and food and environmental sources in order to compare the prevalence and type of genetic determinants encoding cadmium, arsenic, and benzalkonium chloride resistance. Most of the detected genes of cadmium (27.8%), arsenic (15.6%), and benzalkonium chloride (7.0%) resistance were located on mobile genetic elements, even in phylogenetically distant lineages I and II, which indicates the possibility of their horizontal spread. Although no differences were found in the prevalence of these genes between human and food strains, they have been detected sporadically in strains from the environment. Regarding cadmium resistance genes, cadA1C1_Tn5422 predominated, especially in clonal complexes (CCs) 121, 8, and 3 strains. At the same time, qacH_Tn6188-encoding benzalkonium chloride resistance was most frequently detected in the genome of CC121 strains. Genes encoding arsenic resistance were detected mainly in strains CC2 (located on the chromosomal island LGI2) and CC9 (carried on Tn554). The results indicated a relationship between the spread of genes encoding resistance to cadmium, arsenic, and benzalkonium chloride in certain serotypes and CCs and showed the need for a more extensive study of L. monocytogenes strains to better understand their ability to adapt to the food production environment.

Dissemination and conservation of cadmium and arsenic resistance determinants in Listeria and other Gram-positive bacteria

Metal homeostasis in bacteria is a complex and delicate balance. While some metals such as iron and copper are essential for cellular functions, others such as cadmium and arsenic are inherently cytotoxic. While bacteria regularly encounter essential metals, exposure to high levels of toxic metals such as cadmium and arsenic is only experienced in a handful of special habitats. Nonetheless, Listeria and other Gram-positive bacteria have evolved an impressively diverse array of genetic tools for acquiring enhanced tolerance to such metals. Here, we summarize this fascinating collection of resistance determinants in Listeria, with special focus on resistance to cadmium and arsenic, as well as to biocides and antibiotics. We also provide a comparative description of such resistance determinants and adaptations in other Gram-positive bacteria. The complex coselection of heavy metal resistance and other types of resistance seems to be universal across the Gram-positive bacteria, while the type of coselected traits reflects the lifestyle of the specific microbe. The roles of heavy metal resistance genes in environmental adaptation and virulence appear to vary by genus, highlighting the need for further functional studies to explain the mystery behind the array of heavy metal resistance determinants dispersed and maintained among Gram-positive bacteria.

Genetic Carriers and Genomic Distribution of cadA6-A Novel Variant of a Cadmium Resistance Determinant Identified in Listeria spp

Listeria monocytogenes is a pathogen responsible for severe cases of food poisoning. Listeria spp. strains occurring in soil and water environments may serve as a reservoir of resistance determinants for pathogenic L. monocytogenes strains. A large collection of Listeria spp. strains (155) isolated from natural, agricultural, and urban areas was screened for resistance to heavy metals and metalloids, and the presence of resistance determinants and extrachromosomal replicons. Of the tested strains, 35% were resistant to cadmium and 17% to arsenic. Sequence analysis of resistance plasmids isolated from strains of Listeria seeligeri and Listeria ivanovii, and the chromosome of L. seeligeri strain Sr73, identified a novel variant of the cadAC cadmium resistance efflux system, cadA6, that was functional in L. monocytogenes cells. The cadA6 cassette was detected in four Listeria species, including strains of L. monocytogenes, isolated from various countries and sources-environmental, food-associated, and clinical samples. This resistance cassette is harbored by four novel composite or non-composite transposons, which increases its potential for horizontal transmission. Since some cadAC cassettes may influence virulence and biofilm formation, it is important to monitor their presence in Listeria spp. strains inhabiting different environments.

Listeria monocytogenes at the human-wildlife interface: black bears (Ursus americanus) as potential vehicles for Listeria

Listeria monocytogenes is the causative agent of the foodborne illness listeriosis, which can result in severe symptoms and death in susceptible humans and other animals. L. monocytogenes is ubiquitous in the environment and isolates from food and food processing, and clinical sources have been extensively characterized. However, limited information is available on L. monocytogenes from wildlife, especially from urban or suburban settings. As urban and suburban areas are expanding worldwide, humans are increasingly encroaching into wildlife habitats, enhancing the frequency of human-wildlife contacts and associated pathogen transfer events. We investigated the prevalence and characteristics of L. monocytogenes in 231 wild black bear capture events between 2014 and 2017 in urban and suburban sites in North Carolina, Georgia, Virginia and United States, with samples derived from 183 different bears. Of the 231 captures, 105 (45%) yielded L. monocytogenes either alone or together with other Listeria. Analysis of 501 samples, primarily faeces, rectal and nasal swabs for Listeria spp., yielded 777 isolates, of which 537 (70%) were L. monocytogenes. Most L. monocytogenes isolates exhibited serotypes commonly associated with human disease: serotype 1/2a or 3a (57%), followed by the serotype 4b complex (33%). Interestingly, approximately 50% of the serotype 4b isolates had the IVb-v1 profile, associated with emerging clones of L. monocytogenes. Thus, black bears may serve as novel vehicles for L. monocytogenes, including potentially emerging clones. Our results have significant public health implications as they suggest that the ursine host may preferentially select for L. monocytogenes of clinically relevant lineages over the diverse listerial populations in the environment. These findings also help to elucidate the ecology of L. monocytogenes and highlight the public health significance of the human-wildlife interface.

Dynamics of mobile genetic elements of Listeria monocytogenes persisting in ready-to-eat seafood processing plants in France

BACKGROUND

Listeria monocytogenes Clonal Complexes (CCs) have been epidemiologically associated with foods, especially ready-to-eat (RTE) products for which the most likely source of contamination depends on the occurrence of persisting clones in food-processing environments (FPEs). As the ability of L. monocytogenes to adapt to environmental stressors met in the food chain challenges the efforts to its eradication from FPEs, the threat of persistent strains to the food industry and public health authorities continues to rise. In this study, 94 food and FPEs L. monocytogenes isolates, representing persistent subtypes contaminating three French seafood facilities over 2-6 years, were whole-genome sequenced to characterize their genetic diversity and determine the biomarkers associated with long-term survival in FPEs.

RESULTS

Food and FPEs isolates belonged to five CCs, comprising long-term intra- and inter-plant persisting clones. Mobile genetic elements (MGEs) such as plasmids, prophages and transposons were highly conserved within CCs, some of which harboured genes for resistance to chemical compounds and biocides used in the processing plants. Some of these genes were found in a 90.8 kbp plasmid, predicted to be" mobilizable", identical in isolates from CC204 and CC155, and highly similar to an 81.6 kbp plasmid from isolates belonging to CC7. These similarities suggest horizontal transfer between isolates, accompanied by deletion and homologous recombination in isolates from CC7. Prophage profiles characterized persistent clonal strains and several prophage-loci were plant-associated. Notably, a persistent clone from CC101 harboured a novel 31.5 kbp genomic island that we named Listeria genomic island 3 (LGI3), composed by plant-associated loci and chromosomally integrating cadmium-resistance determinants cadA1C.

CONCLUSIONS

Genome-wide analysis indicated that inter- and intra-plant persisting clones harbour conserved MGEs, likely acquired in FPEs and maintained by selective pressures. The presence of closely related plasmids in L. monocytogenes CCs supports the hypothesis of horizontal gene transfer conferring enhanced survival to FPE-associated stressors, especially in hard-to-clean harbourage sites. Investigating the MGEs evolutionary and transmission dynamics provides additional resolution to trace-back potentially persistent clones. The biomarkers herein discovered provide new tools for better designing effective strategies for the removal or reduction of resident L. monocytogenes in FPEs to prevent contamination of RTE seafood.

Residual Variation Intolerance Score Detects Loci Under Selection in Neuroinvasive Listeria monocytogenes

Listeria monocytogenes is a Gram-positive bacterium that can be found in a broad range of environments, including soil, food, animals, and humans. L. monocytogenes can cause a foodborne disease manifesting as sepsis and meningo-encephalitis. To evaluate signals of selection within the core genome of neuroinvasive L. monocytogenes strains, we sequenced 122 L. monocytogenes strains from cerebrospinal fluid (CSF) of Dutch meningitis patients and performed a genome-wide analysis using Tajima’s D and ω (dN/dS). We also evaluated the residual variation intolerance score (RVIS), a computationally less demanding methodology, to identify loci under selection. Results show that the large genetic distance between the listerial lineages influences the Tajima’s D and ω (dN/dS) outcome. Within genetic lineages we detected signals of selection in 6 of 2327 loci (<1%), which were replicated in an external cohort of 105 listerial CSF isolates from France. Functions of identified loci under selection were within metabolism pathways (lmo2476, encoding aldose 1-epimerase), putative antimicrobial resistance mechanisms (lmo1855, encoding PBPD3), and virulence factors (lmo0549, internalin-like protein; lmo1482, encoding comEC). RVIS over the two genetic lineages showed signals of selection in internalin-like proteins loci potentially involved in pathogen-host interaction (lmo0549, lmo0610, and lmo1290). Our results show that RVIS can be used to detect bacterial loci under selection.

Biocide-Tolerant Listeria monocytogenes Isolates from German Food Production Plants Do Not Show Cross-Resistance to Clinically Relevant Antibiotics

Contamination of food during processing is recognized as a main transmission route of Listeria monocytogenes To prevent microbial contamination, biocides are widely applied as disinfectants in food processing plants. However, there are concerns about the development of antimicrobial resistance in foodborne pathogens due to widespread biocide usage. In our study, 93 L. monocytogenes isolates from German food production facilities were (i) tested for biocide and antibiotic susceptibility using broth microdilution assays, (ii) analyzed for links between reduced biocide susceptibility and antibiotic resistance, and (iii) characterized by whole-genome sequencing, including the detection of genes coding for biocide tolerance, antibiotic resistance, and other virulence factors. Fifteen L. monocytogenes isolates were tolerant to benzalkonium chloride (BAC), and genes conferring BAC tolerance were found in 13 of them. Antibiotic resistance was not associated with biocide tolerance. BAC-tolerant isolates were assigned to 6 multilocus sequence type (MLST) clonal complexes, and most of them harbored internalin A pseudogenes with premature stop codons or deletions (n = 9). Our study demonstrated a high genetic diversity among the investigated isolates including genotypes that are frequently involved in human infections. Although in vitro adaptation studies to biocides have raised concerns about increasing cross-resistance to antibiotics, our results do not provide evidence for this phenomenon in field isolates.IMPORTANCE Foodborne pathogens such as L. monocytogenes can persist in food production environments for a long time, causing perennial outbreaks. Hence, bacterial pathogens are able to survive cleaning and disinfection procedures. Accordingly, they may be repeatedly exposed to sublethal concentrations of disinfectants, which might result in bacterial adaptation to these biocides. Furthermore, antibiotic coresistance and cross-resistance are known to evolve under biocide selection pressure in vitro Hence, antimicrobial tolerance seems to play a crucial role in the resilience and persistence of foodborne pathogens in the food chain and might reduce therapeutic options in infectious diseases.

Whole-Genome Sequencing-Based Characterization of 100 Listeria monocytogenes Isolates Collected from Food Processing Environments over a Four-Year Period

Listeria monocytogenes is frequently found in foods and processing facilities, where it can persist, creating concerns for the food industry. Its ability to survive under a wide range of environmental conditions enhances the potential for cross-contamination of the final food products, leading to possible outbreaks of listeriosis. In this study, whole-genome sequencing (WGS) was applied as a tool to characterize and track 100 L. monocytogenes isolates collected from three food processing environments. These WGS data from environmental and food isolates were analyzed to (i) assess the genomic diversity of L. monocytogenes, (ii) identify possible source(s) of contamination, cross-contamination routes, and persistence, (iii) detect absence/presence of antimicrobial resistance-encoding genes, (iv) assess virulence genotypes, and (v) explore in vivo pathogenicity of selected L. monocytogenes isolates carrying different virulence genotypes. The predominant L. monocytogenes sublineages (SLs) identified were SL101 (21%), SL9 (17%), SL121 (12%), and SL5 (12%). Benzalkonium chloride (BC) tolerance-encoding genes were found in 62% of these isolates, a value that increased to 73% among putative persistent subgroups. The most prevalent gene was emrC followed by bcrABC, qacH-Tn6188, and qacC. The L. monocytogenes major virulence factor inlA was truncated in 31% of the isolates, and only one environmental isolate (L. monocytogenes CFS086) harbored all major virulence factors, including Listeria pathogenicity island 4 (LIPI-4), which has been shown to confer hypervirulence. A zebrafish embryo infection model showed a low (3%) embryo survival rate for all putatively hypervirulent L. monocytogenes isolates assayed. Higher embryo survival rates were observed following infection with unknown virulence potential (20%) and putatively hypovirulent (53 to 83%) L. monocytogenes isolates showing predicted pathogenic phenotypes inferred from virulence genotypes.IMPORTANCE This study extends current understanding of the genetic diversity among L. monocytogenes from various food products and food processing environments. Application of WGS-based strategies facilitated tracking of this pathogen of importance to human health along the production chain while providing insights into the pathogenic potential for some of the L. monocytogenes isolates recovered. These analyses enabled the grouping of selected isolates into three putative virulence categories according to their genotypes along with informing selection for phenotypic assessment of their pathogenicity using the zebrafish embryo infection model. It has also facilitated the identification of those isolates with genes conferring tolerance to commercially used biocides. Findings from this study highlight the potential for the application of WGS as a proactive tool to support food safety controls as applied to L. monocytogenes.

Benzalkonium Chlorides: Uses, Regulatory Status, and Microbial Resistance

Benzalkonium chlorides (BACs) are chemicals with widespread applications due to their broad-spectrum antimicrobial properties against bacteria, fungi, and viruses. This review provides an overview of the market for BACs, as well as regulatory measures and available data on safety, toxicity, and environmental contamination. We focus on the effect of frequent exposure of microbial communities to BACs and the potential for cross-resistant phenotypes to emerge. Toward this goal, we review BAC concentrations in consumer products, their correlation with the emergence of tolerance in microbial populations, and the associated risk potential. Our analysis suggests that the ubiquitous and frequent use of BACs in commercial products can generate selective environments that favor microbial phenotypes potentially cross-resistant to a variety of compounds. An analysis of benefits versus risks should be the guidepost for regulatory actions regarding compounds such as BACs.

Coresistance to Benzalkonium Chloride Disinfectant and Heavy Metal Ions in Listeria monocytogenes and Listeria innocua Swine Isolates from China

The development of coresistance to disinfectants and heavy metals contributes to the fitness of Listeria spp. in foods or food processing environments, where life-threatening Listeria monocytogenes coexist and coevolve with other Listeria spp. Despite extensive research on L. monocytogenes, coresistance to disinfectants and heavy metals is less documented for other Listeria spp. In this study, we screened 30 L. monocytogenes and 27 Listeria innocua isolates recovered from 273 swine samples for resistance to quaternary ammonium compound benzalkonium chloride (BC) and to heavy metals cadmium (Cd) and arsenic (As). Moreover, we evaluated the potential mechanisms of resistance by detecting the efflux pump activity in BC resistance and the presence of resistance determinants. The average minimum inhibitory concentrations of BC in L. innocua (10.7 ± 2.0) were significantly higher than that in L. monocytogenes (6.9 ± 3.7) (p < 0.05). Resistance to BC and heavy metals was correlated, where all BC-resistant L. innocua and As-resistant L. monocytogenes isolates were coresistant to BC and Cd. Twenty percent and 66.7% of BC resistance in L. monocytogenes and L. innocua were related to reserpine-associated efflux pumps, whereas all cases of BC resistance were related to carbonyl cyanide 3-chlorophenylhydrazone-associated efflux pumps. The cadA1 and cadA2 genes were present in Cd-resistant isolates but not in Cd-sensitive isolates, and cadA3 was undetectable in all isolates examined. cadA4 conferring lower level of Cd resistance was copresent with arsA1 and arsA2 in the Cd-resistant and As-susceptible L. monocytogenes isolate LM3. Our findings suggest that swine serves as a reservoir for developing resistance to disinfectant and heavy metals in L. monocytogenes and L. innocua, which share common resistance mechanisms such as efflux pumps and resistance genes. This work provides new insight into the coresistance events of other Listeria as a potential contributor of the resistance in L. monocytogenes.

Heavy Metal Resistance Determinants of the Foodborne Pathogen Listeria monocytogenes

Listeria monocytogenes is ubiquitous in the environment and causes the disease listeriosis. Metal homeostasis is one of the key processes utilized by L. monocytogenes in its role as either a saprophyte or pathogen. In the environment, as well as within an animal host, L. monocytogenes needs to both acquire essential metals and mitigate toxic levels of metals. While the mechanisms associated with acquisition and detoxification of essential metals such as copper, iron, and zinc have been extensively studied and recently reviewed, a review of the mechanisms associated with non-essential heavy metals such as arsenic and cadmium is lacking. Resistance to both cadmium and arsenic is frequently encountered in L. monocytogenes, including isolates from human listeriosis. In addition, a growing body of work indicates the association of these determinants with other cellular functions such as virulence, suggesting the importance of further study in this area.

Prevalence of plasmid-borne benzalkonium chloride resistance cassette bcrABC and cadmium resistance cadA genes in nonpathogenic Listeria spp. isolated from food and food-processing environments

The sixty-seven nonpathogenic Listeria spp. strains isolated from food and food processing environments in Poland were examined for the presence of benzalkonium chloride (BC) resistance cassette (bcrABC) and four different variants of cadmium resistance determinants (cadA1-cadA4). All the strains were phenotypically resistant to cadmium and 22 among them were also resistant to BC. PCR-based analysis revealed that bcrABC cassette was harbored by 95.5% of the strains phenotypically resistant to BC. All of them harbored also either cadA1 or cadA2 genes (none carried cadA3 or cadA4), which corresponded to the presence of plasmids with two restriction patterns. The strains resistant to cadmium but susceptible to BC harbored only the cadA1 gene variant. DNA-DNA hybridization analysis showed that all the identified bcrABC, cadA1 and cadA2 genes were located within plasmids, classified into 11 groups of RFLP profiles. Only one of the plasmids - pLIS1 of Listeria welshimeri (carrying bcrABC and cadA2) - was capable of efficient conjugal transfer from nonpathogenic Listeria isolates to a pathogenic Listeria monocytogenes strain. Analysis of the complete nucleotide sequence of pLIS1 (the first sequenced plasmid of L. welshimeri species) revealed the presence of genes involved in plasmid replication, stabilization and transfer as well as genes conferring resistance phenotypes. Comparative analysis showed that pLIS1 genome is highly similar to a group of plasmids originating from L. monocytogenes strains. A common feature of pLIS1 and its relatives, besides the presence of the resistance genes, is the presence of numerous transposable elements (TEs). The analysis revealed the important role of TEs in both promoting genetic rearrangements within Listeria spp. plasmids and the acquisition of resistance determinants.

Strain-level typing and identification of bacteria - a novel approach for SERS active plasmonic nanostructures

One of the potential applications of surface-enhanced Raman spectroscopy (SERS) is the detection of biological compounds and microorganisms. Here we demonstrate that SERS coupled with principal component analysis (PCA) serves as a perfect method for determining the taxonomic affiliation of bacteria at the strain level. We demonstrate for the first time that it is possible to distinguish different genoserogroups within a single species, Listeria monocytogenes, which is one of the most virulent foodborne pathogens and in some cases contact with which may be fatal. We also postulate that it is possible to detect additional proteins in the L. monocytogenes cell envelope, which provide resistance to benzalkonium chloride and cadmium. A better understanding of this infectious agent could help in selecting the appropriate pharmaceutical product for enhanced treatment. Graphical abstract ᅟ.

Antimicrobial Resistance in Listeria Species

For nearly a century the use of antibiotics to treat infectious diseases has benefited human and animal health. In recent years there has been an increase in the emergence of antibiotic-resistant bacteria, in part attributed to the overuse of compounds in clinical and farming settings. The genus Listeria currently comprises 17 recognized species found throughout the environment. Listeria monocytogenes is the etiological agent of listeriosis in humans and many vertebrate species, including birds, whereas Listeria ivanovii causes infections mainly in ruminants. L. monocytogenes is the third-most-common cause of death from food poisoning in humans, and infection occurs in at-risk groups, including pregnant women, newborns, the elderly, and immunocompromised individuals.

Listeria monocytogenes Sequence Types 121 and 14 Repeatedly Isolated Within One Year of Sampling in a Rabbit Meat Processing Plant: Persistence and Ecophysiology

Listeria monocytogenes is a foodborne pathogen adapted to survive and persist in multiple environments. Following two previous studies on prevalence and virulence of L. monocytogenes ST121 and ST14 repeatedly collected in a the same rabbit-meat processing plant, the research questions of the present study were to: (1) assess persistence of L. monocytogenes isolates from the rabbit-plant; (2) select genes associated to physiological adaptation to the food-processing environment; (3) compare presence/absence/truncation of these genes in newly sequenced and publicly available ST121 and ST14 genomes. A total of 273 draft genomes including ST121 and ST14 newly sequenced and publicly available draft genomes were analyzed. Whole-genome Single Nucleotide Polymorfism (wgSNP) analysis was performed separately on the assemblies of ST121 and ST14 draft genomes. SNPs alignments were used to infer phylogeny. A dataset of L. monocytogenes ecophysiology genes was built based on a comprehensive literature review. The 94 selected genes were screened on the assemblies of all ST121 and ST14 draft genomes. Significant gene enrichments were evaluated by statistical analyses. A persistent ST14 clone, including 23 out of 27 newly sequenced genomes, was circulating in the rabbit-meat plant along with two not persistent clones. A significant enrichment was observed in ST121 genomes concerning stress survival islet 2 (SSI-2) (alkaline and oxidative stress), qacH gene (resistance to benzalkonium chloride), cadA1C gene cassette (resistance to 70 mg/l of cadmium chloride) and a truncated version of actA gene (biofilm formation). Conversely, ST14 draft genomes were enriched with a full-length version of actA gene along with the Listeria Genomic Island 2 (LGI 2) including the ars operon (arsenic resistance) and the cadA4C gene cassette (resistance to 35 mg/l of cadmium chloride). Phenotypic tests confirmed ST121 as a weak biofilm producer in comparison to ST14. In conclusion, ST121 carried the qacH gene and was phenotypically resistant to quaternary ammonium compounds. This property might contribute to the high prevalence of ST121 in food processing plants. ST14 showed greater ability to form biofilms, which might contribute to the occasional colonization and persistence on harborage sites where sanitizing procedures are difficult to display.

Genomic and phenotypic diversity of Listeria monocytogenes clonal complexes associated with human listeriosis

Listeria monocytogenes is a pathogen of significant concern in many ready to eat foods due to its ability to survive and multiply even under significant environmental stresses. Listeriosis in humans is a concern, especially to high-risk populations such as those who are immunocompromised or pregnant, due to the high rates of morbidity and mortality. Whole genome sequencing has become a routine part of assessing L. monocytogenes isolated from patients, and the frequency of different genetic subtypes associated with listeriosis is now being reported. The recent abundance of genome sequences for L. monocytogenes has provided a wealth of information regarding the variation in core and accessory genomic elements. Newly described accessory genomic regions have been linked to greater virulence capabilities as well as greater resistance to environmental stressors such as sanitizers commonly used in food processing facilities. This review will provide a summary of our current understanding of stress response and virulence phenotypes of L. monocytogenes, within the context of the genetic diversity of the pathogen.

The absence of N-acetylglucosamine in wall teichoic acids of Listeria monocytogenes modifies biofilm architecture and tolerance to rinsing and cleaning procedures

The wall teichoic acid (WTA) is the major carbohydrate found within the extracellular matrix of the Listeria monocytogenes biofilm. We first addressed the frequency of spontaneous mutations in two genes (lmo2549 and lmo2550) responsible for the GlcNAcylation in 93 serotype 1/2a strains that were mainly isolated from seafood industries. We studied the impact of mutations in lmo2549 or lmo2550 genes on biofilm formation by using one mutant carrying a natural mutation inactivating the lmo2550 gene (DSS 1130 BFA2 strain) and two EGD-e mutants that lack respective genes by in-frame deletion of lmo2549 or lmo2550 using splicing-by-overlap-extension PCR, followed by allelic exchange mutagenesis. The lmo2550 gene mutation, occurring in around 50% isolates, caused a decrease in bacterial adhesion to stainless steel compared to wild-type EGD-e strain during the adhesion step. On the other hand, bacterial population weren't significantly different after 24h-biofilm formation. The biofilm architecture was different between the wild-type strain and the two mutants inactivated for lmo2549 or lmo2550 genes respectively with the presence of bacterial micro-colonies for mutants which were not observed in the wild-type EGD-e strain biofilm. These differences might account for the stronger hydrophilic surface exhibited by the mutant cells. Upon a water flow or to a cleaning procedure at a shear stress of 0.16 Pa, the mutant biofilms showed the higher detachment rate compared to wild-type strain. Meanwhile, an increase in the amount of residual viable but non-culturable population on stainless steel was recorded in two mutants. Our data suggests that the GlcNAc residue of WTA played a role in adhesion and biofilm formation of Listeria monocyctogenes.