1
|
Mukherjee S, Sasmal PK, Reddy KP, Pal A, Pal D, Nandi SK, Chanda A, Ahmed S, Datta P. Spatiotemporally Controlled Release of Etamsylate from Bioinspired Peptide-Functionalized Nanoparticles Arrests Bleeding Rapidly and Improves Clot Stability in a Rabbit Internal Hemorrhage Model. ACS Biomater Sci Eng 2024; 10:5014-5026. [PMID: 38982893 DOI: 10.1021/acsbiomaterials.4c00743] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 07/11/2024]
Abstract
Achieving rapid clotting and clot stability are important unmet goals of clinical management of noncompressible hemorrhage. This study reports the development of a spatiotemporally controlled release system of an antihemorrhagic drug, etamsylate, in the management of internal hemorrhage. Gly-Arg-Gly-Asp-Ser (GRGDS) peptide-functionalized chitosan nanoparticles, with high affinity to bind with the GPIIa/IIIb receptor of activated platelets, were loaded with the drug etamsylate (etamsylate-loaded GRGDS peptide-functionalized chitosan nanoparticles; EGCSNP). Peptide conjugation was confirmed by LCMS, and the delivery system was characterized by DLS, SEM, XRD, and FTIR. In vitro study exhibited 90% drug release till 48 h fitting into the Weibull model. Plasma recalcification time and prothrombin time tests of GRGDS-functionalized nanoparticles proved that clot formation was 1.5 times faster than nonfunctionalized chitosan nanoparticles. The whole blood clotting time was increased by 2.5 times over clot formed under nonfunctionalized chitosan nanoparticles. Furthermore, the application of rheometric analysis revealed a 1.2 times stiffer clot over chitosan nanoparticles. In an in vivo liver laceration rabbit model, EGCSNP spatially localized at the internal injury site within 5 min of intravenous administration, and no rebleeding was recorded up to 3 h. The animals survived for 3 weeks after the injury, indicating the strong potential of the system for the management of noncompressible hemorrhage.
Collapse
Affiliation(s)
- Soumyadip Mukherjee
- Department of Pharmaceutics, National Institute of Pharmaceutical Education and Research, Kolkata 700054, India
| | | | - Kolimi Prashanth Reddy
- Department of Pharmaceutics, National Institute of Pharmaceutical Education and Research, Kolkata 700054, India
| | - Anubroto Pal
- Department of Pharmacology and Toxicology, National Institute of Pharmaceutical Education and Research, Kolkata 700054, India
| | - Debajyoti Pal
- Department of Veterinary Surgery and Radiology, West Bengal University of Animal and Fishery Sciences, Kolkata 70037, West Bengal, India
| | - Samit Kumar Nandi
- Department of Veterinary Surgery and Radiology, West Bengal University of Animal and Fishery Sciences, Kolkata 70037, West Bengal, India
| | - Abhijit Chanda
- Department of Mechanical Engineering, Jadavpur University, Kolkata 700032, India
| | - Sahnawaz Ahmed
- Department of Medicinal Chemistry, National Institute of Pharmaceutical Education and Research, Kolkata 700054, India
| | - Pallab Datta
- Department of Pharmaceutics, National Institute of Pharmaceutical Education and Research, Kolkata 700054, India
| |
Collapse
|
2
|
Wang D, Jiang Q, Dong Z, Meng T, Hu F, Wang J, Yuan H. Nanocarriers transport across the gastrointestinal barriers: The contribution to oral bioavailability via blood circulation and lymphatic pathway. Adv Drug Deliv Rev 2023; 203:115130. [PMID: 37913890 DOI: 10.1016/j.addr.2023.115130] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/20/2023] [Revised: 09/27/2023] [Accepted: 10/27/2023] [Indexed: 11/03/2023]
Abstract
Oral administration is the preferred route of drug delivery in clinical practice due to its noninvasiveness, safety, convenience, and high patient compliance. The gastrointestinal tract (GIT) plays a crucial role in facilitating the targeted delivery of oral drugs. However, the GIT presents multiple barriers that impede drug absorption, including the gastric barrier in the stomach and the mucus and epithelial barriers in the intestine. In recent decades, nanotechnology has emerged as a promising approach for overcoming these challenges by utilizing nanocarrier-based drug delivery systems such as liposomes, micelles, polymeric nanoparticles, solid lipid nanoparticles, and inorganic nanoparticles. Encapsulating drugs within nanocarriers not only protects them from degradation but also enhances their transport and absorption across the GIT, ultimately improving oral bioavailability. The aim of this review is to elucidate the mechanisms underlying nanocarrier-mediated transportation across the GIT into systemic circulation via both the blood circulation and lymphatic pathway.
Collapse
Affiliation(s)
- Ding Wang
- College of Pharmaceutical Science, Zhejiang University, Hangzhou 310058, PR China
| | - Qi Jiang
- College of Pharmaceutical Science, Zhejiang University, Hangzhou 310058, PR China
| | - Zhefan Dong
- College of Pharmaceutical Science, Zhejiang University, Hangzhou 310058, PR China
| | - Tingting Meng
- College of Pharmaceutical Science, Zhejiang University, Hangzhou 310058, PR China
| | - Fuqiang Hu
- College of Pharmaceutical Science, Zhejiang University, Hangzhou 310058, PR China
| | - Jianwei Wang
- The Second Affiliated Hospital Zhejiang University School of Medicine, Hangzhou, 310009, PR China
| | - Hong Yuan
- College of Pharmaceutical Science, Zhejiang University, Hangzhou 310058, PR China; China Jinhua Institute of Zhejiang University, Jinhua 321299, PR China.
| |
Collapse
|
3
|
Li S, Nih LR, Bachman H, Fei P, Li Y, Nam E, Dimatteo R, Carmichael ST, Barker TH, Segura T. Hydrogels with precisely controlled integrin activation dictate vascular patterning and permeability. NATURE MATERIALS 2017; 16:953-961. [PMID: 28783156 PMCID: PMC5809173 DOI: 10.1038/nmat4954] [Citation(s) in RCA: 120] [Impact Index Per Article: 17.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/18/2016] [Accepted: 06/30/2017] [Indexed: 05/05/2023]
Abstract
Integrin binding to bioengineered hydrogel scaffolds is essential for tissue regrowth and regeneration, yet not all integrin binding can lead to tissue repair. Here, we show that through engineering hydrogel materials to promote α3/α5β1 integrin binding, we can promote the formation of a space-filling and mature vasculature compared with hydrogel materials that promote αvβ3 integrin binding. In vitro, α3/α5β1 scaffolds promoted endothelial cells to sprout and branch, forming organized extensive networks that eventually reached and anastomosed with neighbouring branches. In vivo, α3/α5β1 scaffolds delivering vascular endothelial growth factor (VEGF) promoted non-tortuous blood vessel formation and non-leaky blood vessels by 10 days post-stroke. In contrast, materials that promote αvβ3 integrin binding promoted endothelial sprout clumping in vitro and leaky vessels in vivo. This work shows that precisely controlled integrin activation from a biomaterial can be harnessed to direct therapeutic vessel regeneration and reduce VEGF-induced vascular permeability in vivo.
Collapse
Affiliation(s)
- Shuoran Li
- Department of Chemical and Biomolecular Engineering, University of California, Los Angeles, CA 90095, USA
| | - Lina R. Nih
- Department of Chemical and Biomolecular Engineering, University of California, Los Angeles, CA 90095, USA
| | - Haylee Bachman
- Department of Chemistry and Biochemistry, Georgia Institute of Technology, Atlanta, GA 30332, USA
| | - Peng Fei
- School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan, 430074, China
- Department of Mechanical and Aerospace Engineering, University of California, Los Angeles, CA 90095, USA
| | - Yilei Li
- Department of Electrical Engineering, University of California, Los Angeles, CA 90095, USA
- NovuMind Inc., Santa Clara, CA, 95054, USA
| | - Eunwoo Nam
- Department of Chemical and Biomolecular Engineering, University of California, Los Angeles, CA 90095, USA
| | - Robert Dimatteo
- Department of Chemical and Biomolecular Engineering, University of California, Los Angeles, CA 90095, USA
| | - S. Thomas Carmichael
- Department of Medicine, Neurology, University of California, Los Angeles, CA 90095, USA
| | - Thomas H. Barker
- Department of Biomedical Engineering, University of Virginia, Charlottesville, VA 22908, USA
| | - Tatiana Segura
- Department of Chemical and Biomolecular Engineering, University of California, Los Angeles, CA 90095, USA
- Department of Medicine, Dermatology, University of California, Los Angeles, CA 90095, USA
- Department of Bioengineering, University of California, Los Angeles, CA 90095, USA
- Corresponding author: Prof. Tatiana Segura Tel.: +1-310-206-3980,
| |
Collapse
|
4
|
Guan YT, Li Y, Jin ZH. Osteoblast Growth on Poly(L-lactic acid)-Negative Ion Powder Composite Films. J BIOACT COMPAT POL 2016. [DOI: 10.1177/0883911506068684] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
Composite films made from poly(L-lactic acid) (PLLA) and negative ion powder (NIP, opal powder) were fabricated and the growth of human osteoblasts cultured in vitro on these composite films was assessed. The surface properties of the composite film and the control (100% PLLA) were investigated by contact angle and scanning electron microscopy (SEM). The former indicated that hydrophilicity did not change significantly, whereas the latter indicated that the surface of the composite films was not as smooth as the control, but without holes or caves. After osteoblast cells were seeded on the composite and control films, the cell densities and the morphology on these films were studied by light microscopy and SEM. The differential function of the cells was assessed by testing their alkaline phosphatase (ALP) activity. These results indicate that the addition of powder improved the adhesion between the osteoblasts and the composite films. The improvement came from the negative ions which were given off by the negative ion powder. The mechanism of negative ion was reviewed and a model of the mechanism was developed. This paper provides the first evidence that negative powder (functional material) can be used to fabricate composite films with PLLA for better cell growth.
Collapse
Affiliation(s)
- Y. T. Guan
- State Key Laboratory of Metal Strength, Institute of Material Science and Technology, Xi’an Jiaotong University, Xi’an, 710049, P.R. China, School of Textile and Materials, Xi’an University of Engineering Science and Technology, Xi’an, 710048, P.R. China,
| | - Y. Li
- Institute of Textiles and Clothing, The Hongkong Polytechnic University, Hungkom, Kowloon, Hongkong
| | - Z. H. Jin
- State Key Laboratory of Metal Strength, Institute of Material Science and Technology, Xi’an Jiaotong University, Xi’an, 710049, P.R. China
| |
Collapse
|
5
|
Abstract
The contact of any biomaterial with blood gives rise to multiple pathophysiologic defensive mechanisms such as activation of the coagulation cascade, platelet adhesion and activation of the complement system and leukocytes. The reduction of these events is of crucial importance for the successful clinical performance of a cardiovascular device. This can be achieved by improving the hemocompatibility of the device materials or by pharmacologic inhibition of the key enzymes responsible for the activation of the cascade reactions, or a combination of both. Different strategies have been developed during the last 20 years, and this article attempts to review the most significant, by dividing them into three main categories: bioinert or biopassive, biomimetic and bioactive strategies. With regard to bioactive strategies, particular attention is given to heparin immobilization and recent related technologies. References from both scientific literature and commercial sites are provided. Future development and studies are suggested.
Collapse
Affiliation(s)
- Maria Cristina Tanzi
- Politecnico di Milano, Bioengineering Department, P.zza L. da Vinci, Milano, Italy.
| |
Collapse
|
6
|
Widhe M, Johansson U, Hillerdahl CO, Hedhammar M. Recombinant spider silk with cell binding motifs for specific adherence of cells. Biomaterials 2013; 34:8223-34. [PMID: 23916396 DOI: 10.1016/j.biomaterials.2013.07.058] [Citation(s) in RCA: 59] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/15/2013] [Accepted: 07/18/2013] [Indexed: 12/31/2022]
Abstract
Silk matrices have previously been shown to possess general properties governing cell viability. However, many cell types also require specific adhesion sites for successful in vitro culture. Herein, we have shown that cell binding motifs can be genetically fused to a partial spider silk protein, 4RepCT, without affecting its ability to self-assemble into stable matrices directly in a physiological-like buffer. The incorporated motifs were exposed in the formed matrices, and available for binding of integrins. Four different human primary cell types; fibroblasts, keratinocytes, endothelial cells and Schwann cells, were applied to the matrices and investigated under serum-free culture conditions. Silk matrices with cell binding motifs, especially RGD, were shown to promote early adherence of cells, which formed stress fibers and distinct focal adhesion points. Schwann cells acquired most spread-out morphology on silk matrices with IKVAV, where significantly more viable cells were found, also when compared to wells coated with laminin. This strategy is thus suitable for development of matrices that allow screening of various cell binding motifs and their effect on different cell types.
Collapse
Affiliation(s)
- Mona Widhe
- Department of Anatomy, Physiology and Biochemistry, Swedish University of Agricultural Sciences, The Biomedical Centre, S-75123 Uppsala, Sweden
| | | | | | | |
Collapse
|
7
|
Song SH, Lee SJ, Rhee SH. Synthesis of biodegradable poly(ε-caprolactone)-organosiloxane hybrid with carboxylate groups. J Biomed Mater Res B Appl Biomater 2012; 100:1289-97. [DOI: 10.1002/jbm.b.32695] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/30/2011] [Revised: 01/04/2012] [Accepted: 02/16/2012] [Indexed: 01/16/2023]
|
8
|
Lin HB, Cooper SL. Synthesis, Surface and Cell-Adhesion Properties of Polyurethanes Containing Covalently Grafted RGD-Peptides. ACTA ACUST UNITED AC 2011. [DOI: 10.1557/proc-331-105] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022]
Abstract
AbstractIn an attempt to improve endothelial cell adhesion and growth on a polyurethane copolymer, cell adhesive RGD-containing peptides were grafted to the polymer backbone. Two peptide grafting reaction schemes, including one-step and two-step approaches, were developed. Amino acid analysis confirmed that the two-step approach had a higher peptide coupling efficiency. The two-step reaction scheme was utilized to prepare GRGDSY, GRGDVY and GRGESY (inactive control) peptide grafted polyurethanes with two different peptide densities (100 and 250 μmol/g polymer). Dynamic contact angle measurements indicated that the surfaces of the peptide grafted polyurethanes were more hydrophilic than the starting and carboxylated versions of the precursor polyurethane. In-vitro endothelial cell adhesion experiments showed that, without the presence of serum in culture medium, the GRGDSY- and GRGDVY-grafted polyurethanes dramatically enhanced cell attachment and spreading. Increasing the peptide density from 100 to 250 μmol/g polymer for the GRGDSYand GRGDVY-grafted polyurethanes resulted in an increase in cell attachment. With approximately the same peptide density (100 or 250 μmol/g polymer), the GRGDVY-grafted polymers supported more adherent cells than the GRGDSY-grafted polymers. Similar trends were observed in the in-vitro endothelial cell growth studies using culture medium containing serum and endothelial cell growth supplement. These RGD-peptide grafted polyurethanes may be useful in providing an easily prepared cell-adhesive substrate for various implantable devices and hybrid organs.
Collapse
|
9
|
Abstract
We present many examples of surface engineered polymeric biomaterials with nanosize modified layers, controlled protein adsorption, and cellular interactions potentially applicable for tissue and/or blood contacting devices, scaffolds for cell culture and tissue engineering, biosensors, biological microchips as well as approaches to their preparation.
Collapse
|
10
|
Gu SY, Wang ZM, Zhang CY, Ren J. Synthesis and evaluation of a biodegradable material with cell recognition motives. Carbohydr Polym 2008. [DOI: 10.1016/j.carbpol.2008.04.020] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
|
11
|
Deng C, Chen X, Yu H, Sun J, Lu T, Jing X. A biodegradable triblock copolymer poly(ethylene glycol)-b-poly(l-lactide)-b-poly(l-lysine): Synthesis, self-assembly, and RGD peptide modification. POLYMER 2007. [DOI: 10.1016/j.polymer.2006.10.046] [Citation(s) in RCA: 87] [Impact Index Per Article: 5.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
|
12
|
Deng C, Chen X, Sun J, Lu T, Wang W, Jing X. RGD peptide grafted biodegradable amphiphilic triblock copolymer poly(glutamic acid)-b-poly(L-lactide)-b-poly(glutamic acid): Synthesis and self-assembly. ACTA ACUST UNITED AC 2007. [DOI: 10.1002/pola.22071] [Citation(s) in RCA: 45] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
|
13
|
Kidane AG, Punshon G, Salacinski HJ, Ramesh B, Dooley A, Olbrich M, Heitz J, Hamilton G, Seifalian AM. Incorporation of a lauric acid-conjugated GRGDS peptide directly into the matrix of a poly(carbonate-urea)urethane polymer for use in cardiovascular bypass graft applications. J Biomed Mater Res A 2006; 79:606-17. [PMID: 16826599 DOI: 10.1002/jbm.a.30817] [Citation(s) in RCA: 21] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Abstract
Gly-Arg-Gly-Asp-Ser (GRGDS) was modified by conjugation to lauric acid (LA) to facilitate incorporation into the matrix of a poly(carbonate-urea)urethane (PCU) used in vascular bypass grafts. GRGDS and LA-GRGDS were synthesized using solid phase Fmoc chemistry and characterized by high performance liquid chromatography and Fourier transform infrared spectroscopy. LA-GRGDS was passively coated and incorporated as nanoparticle dispersion on the PCU films. Biocompatibility of the modified surfaces was investigated. Endothelial cells seeded on LA-GRGDS coated and incorporated PCU showed after 48 h and 72 h a significant (p < 0.05) increase in metabolism compared with unmodified PCU. The platelet adhesion and hemolysis studies showed that the modification of PCU had no adverse effect. In conclusion, LA-conjugated RGD derivatives, such as LA-GRGDS, that permit solubility into solvents used in solvent casting methodologies should have wide applicability in polymer development for use in coronary, vascular, and dialysis bypass grafts, and furthermore scaffolds utilized for tissue regeneration and tissue engineering.
Collapse
Affiliation(s)
- Asmeret G Kidane
- Biomaterial and Tissue Engineering Centre (BTEC), Academic Division of Surgery & Interventional Sciences, University College London, Hampstead Campus, London NW3 2PF, United Kingdom
| | | | | | | | | | | | | | | | | |
Collapse
|
14
|
Park KH, Na K, Chung HM. Enhancement of the adhesion of fibroblasts by peptide containing an Arg-Gly-Asp sequence with poly(ethylene glycol) into a thermo-reversible hydrogel as a synthetic extracellular matrix. Biotechnol Lett 2005; 27:227-31. [PMID: 15742141 DOI: 10.1007/s10529-004-8297-z] [Citation(s) in RCA: 24] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/14/2004] [Accepted: 12/14/2004] [Indexed: 10/25/2022]
Abstract
In an effort to regulate the behavior of mammalian cell entrapped in a gel, the gels were functionalized with the putative cell-binding (-Arg-Gly-Asp-) (RGD) domain. The adhesion molecules composed of Gly-Arg-Gly-Asp-Ser (GRGDS) peptides and the cell recognition ligands were inculcated into the thermo-reversible hydrogel composed of N-isopropylacrylamide, with a small amount of succinyl poly(ethylene glycol) (PEG) acrylate (MW 2000) used as the biomimetic extracellular matrix (ECM). The GRGDS-containing p(NiPAAm-co-PEG) copolymer gel was examined in vitro for its ability to promote cell spreading and to increase the viability of the cells by introducing PEG spacers. ECM poorly adhered to hydrogel lacking adhesion molecules permitting only a 20% spread of the seeded cells after 10 days. When the PEG spacer arms, which were immobilized by a peptide linkage, had been integrated into the hydrogel, the conjugation of RGD improved cell spreading by 600% in a 10-day trial.
Collapse
Affiliation(s)
- Keun-Hong Park
- College of Medicine, Pochon CHA University, Cell and Gene Therapy Research Institute 605, Yeoksam 1-dong, Kangnam-gu, Seoul, 135-081, Korea
| | | | | |
Collapse
|
15
|
Park KH, Na K, Jung SY, Kim SW, Park KH, Cha KY, Chung HM. Insulinoma cell line (MIN6) adhesion and spreading mediated by Arg-Gly-Asp (RGD) sequence conjugated in thermo-reversible gel. J Biosci Bioeng 2005; 99:598-602. [PMID: 16233837 DOI: 10.1263/jbb.99.598] [Citation(s) in RCA: 14] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/04/2005] [Accepted: 03/23/2005] [Indexed: 11/17/2022]
Abstract
We have functionalized gels with a putative cell-binding (-Arg-Gly-Asp-) (RGD) domain in an effort to regulate mammalian cell behavior in cells entrapped with gel. Adhesion molecules composed of Gly-Arg-Gly-Asp-Ser (GRGDS) peptides and cell recognition ligands were inculcated into thermo-reversible hydrogel composed of N-isopropylacrylamide, with a small amount of succinyl poly(ethylene glycol) (PEG) acrylate (MW 2000) used as a biomimetic extracellular matrix (ECM). The GRGDS-containing p(NiPAAm-co-PEG) copolymer gel was studied in vitro for its ability to promote cell spreading and to increase the viability of cells by introducing PEG spacers. Hydrogel lacking the adhesion molecules proved to be a poor ECM for adhesion, permitting only a 20% spread of the seeded cells after 10 d. When PEG spacer arms, immobilized by a peptide linkage, had been integrated into the hydrogel, conjugation of RGD promoted cell spread by 300% in a 28-d trial. In addition, in a serum-free medium, only GRGDS peptides conjugated with the spacer arm were able to promote cell spread.
Collapse
Affiliation(s)
- Keun-Hong Park
- College of Medicine, Pochon CHA University, Cell and Gene Therapy Research Institute, 605 Yeoksam 1-dong, Kangnam-gu, Seoul 135-081, Korea
| | | | | | | | | | | | | |
Collapse
|
16
|
Sun H, Wirsén A, Albertsson AC. Electron Beam-Induced Graft Polymerization of Acrylic Acid and Immobilization of Arginine−Glycine−Aspartic Acid-Containing Peptide onto Nanopatterned Polycaprolactone. Biomacromolecules 2004; 5:2275-80. [PMID: 15530042 DOI: 10.1021/bm049703p] [Citation(s) in RCA: 36] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Electron beam- (EB-) induced graft polymerization of acrylic acid and the subsequent immobilization of arginine-glycine-aspartic acid (RGD) peptide onto nanopatterned polycaprolactone with parallel grooves is reported. A high concentration of carboxylic groups was introduced onto the polymer substrate by EB-induced polymerization of acrylic acid. In the coupling of the RGD peptide to the carboxylated polymer surface, a three-step peptide immobilization process was used. This process included the activation of surface carboxylic acid into an active ester intermediate by use of 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS), the introduction of disulfide groups by use of 2-(2-pyridinyldithio)ethanamine hydrochloride (PDEA), and final immobilization of the peptide via a thiol-disulfide exchange reaction. The extent of coupling was measured by UV spectroscopy. A preliminary study of the in vitro behavior of keratinocytes (NCTC 2544) cultured on the acrylic acid-grafted and RGD peptide-coupled surface showed that most cells grown on the coupled samples had a spread-rounded appearance, while the majority of cells tended to be elongated along the grooves on uncoupled substrates.
Collapse
Affiliation(s)
- Hui Sun
- Department of Fiber and Polymer Technology, Royal Institute of Technology (KTH), Teknikringen 56-58, S 100 44 Stockholm, Sweden
| | | | | |
Collapse
|
17
|
Park KH, Na K, Lee KC. Immobilization of Arg-Gly-Asp (RGD) sequence in sugar containing copolymer for culturing of pheochromocytoma (PC12) cells. J Biosci Bioeng 2004; 97:207-11. [PMID: 16233616 DOI: 10.1016/s1389-1723(04)70192-9] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/22/2003] [Accepted: 01/06/2004] [Indexed: 11/24/2022]
Abstract
A copolymer that included a Gly-Arg-Gly-Asp-Ser (GRGDS) sequence and sugar moieties was synthesized to culture pheochromocytoma cells (PC12). PC12 cells attached to poly(N-p-vinylbenzyl-D-maltonamide-co-6-(p-vinylbenzamido)-hexanoic acid-g-GRGDS) [p(VMA-co-VBGRGDS)]-coated dishes showed greater proliferation than on other polymer-coated surfaces. Enhancement in cell growth correlated with the ability of soluble Arg-Gly-Asp (RGD) to inhibit cell adhesion to surfaces coated with p(VMA-co-VBGRGDS). This method for promoting cell proliferation may be useful for the culturing of anchorage-dependent cells. Furthermore, about 80% greater dopamine secretion from PC12 cells was produced with the p(VMA-co-VBGRGDS) as compared with PC12 cells on unmodified surfaces.
Collapse
Affiliation(s)
- Keun-Hong Park
- School of Medical Engineering, Ajou University, Suwon City 442-749, Korea
| | | | | |
Collapse
|
18
|
Kidane AG, Salacinski HJ, Punshon G, Ramesh B, Srai KS, Seifalian AM. Synthesis and evaluation of amphiphilic RGD derivatives: Uses for solvent casting in polymers and tissue engineering applications. Med Biol Eng Comput 2003; 41:740-5. [PMID: 14686601 DOI: 10.1007/bf02349983] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
Abstract
Derivatives containing arginine-glycine-aspartic acid (RGD) inhibit fibrinogen binding to activated platelets and promote endothelial and smooth muscle cell attachment. An amphiphilic derivative of RGD that can be dissolved in an organic solvent has potential in the development of non-thrombogenic biomaterials. Such a derivative, LA-GRGD, was synthesised by coupling glycine-arginine-glycine-aspartic acid (GRGD) with lauric acid (LA). Its solubility and antithrombotic, cytotoxic and cell-binding effects were then evaluated in comparison with heparin (which is used clinically) and a fibronectin-engineered protein polymer (FEPP). Thromboelastography (TEG) was used to measure blood clotting time using fresh whole blood from healthy volunteers. Tissue factor (TF) activity was measured using plasma with a standard prothrombin time assay (PT). Cytotoxicity was assessed on human umbilical cord endothelial cells (HUVECs) using an Alamar blue assay. Solubility of the conjugate was assessed in a co-solvent. These techniques were used to study LA-GRGD, using heparin and FEPP as controls. The amphiphilic property of LA-GRGD was dependent on the feed mole ratio of GRGD to LA. LA-GRGD was soluble in acetone:water and water. LA-GRGD inhibited TF by >90% and prolonged TEG-r by 8.2+/-3.3 min (200 microg ml(-1)). Heparin inhibited TF by >90%, but prolonged TEG-r by 97.4+/-1.6 min (1 U ml(-1)); FEPP inhibited TF by >90% (100 microg ml(-1)) and prolonged TEG-r by 73.7+/-8.4 min (10 microg ml(-1)). Heparin had no cytotoxic effect on EC metabolism and viability at the concentrations studied (0.1-100 U ml(-1)). No significant cytotoxic effect was produced by LA-GRGD or FEPP at concentrations ranging from 0.1 microg ml(-1) to 50 microg ml(-1), but, at higher concentrations (100 microg ml(-1) and 200 microg ml(-1)), a detrimental effect was observed. Cell binding studies showed that LA-GRGD bound 29% of ECs compared with FEPP (60%) and heparin (22%). This new approach for synthesising amphiphilic RGD and its analogues has potential as a drug delivery system for the manufacture of new polymer formulations for use in bypass grafts and other tissue-engineered devices.
Collapse
Affiliation(s)
- A G Kidane
- Tissue Engineering Centre, University Department of Surgery, Royal Free & University College Medical School, University College London, The Royal Free Hospital, London, UK
| | | | | | | | | | | |
Collapse
|
19
|
Hersel U, Dahmen C, Kessler H. RGD modified polymers: biomaterials for stimulated cell adhesion and beyond. Biomaterials 2003; 24:4385-415. [PMID: 12922151 DOI: 10.1016/s0142-9612(03)00343-0] [Citation(s) in RCA: 1731] [Impact Index Per Article: 82.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
Since RGD peptides (R: arginine; G: glycine; D: aspartic acid) have been found to promote cell adhesion in 1984 (Cell attachment activity of fibronectin can be duplicated by small synthetic fragments of the molecule, Nature 309 (1984) 30), numerous materials have been RGD functionalized for academic studies or medical applications. This review gives an overview of RGD modified polymers, that have been used for cell adhesion, and provides information about technical aspects of RGD immobilization on polymers. The impacts of RGD peptide surface density, spatial arrangement as well as integrin affinity and selectivity on cell responses like adhesion and migration are discussed.
Collapse
Affiliation(s)
- Ulrich Hersel
- Institut für Organische Chemie und Biochemie, Technische Universität München, Lichtenbergstr. 4, D-85747, Garching, Germany
| | | | | |
Collapse
|
20
|
Göransson A, Jansson E, Tengvall P, Wennerberg A. Bone formation after 4 weeks around blood-plasma-modified titanium implants with varying surface topographies: an in vivo study. Biomaterials 2003; 24:197-205. [PMID: 12419619 DOI: 10.1016/s0142-9612(02)00277-6] [Citation(s) in RCA: 30] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/27/2022]
Abstract
The aim of the present study was to investigate and compare the stability and bone ingrowth capacity to screw-shaped titanium implants with five different surface treatments. The implants were: (1) standard turned with a thin blood plasma coat (TP), (2) NaOH-etched dito with pore size 0.2-0.3 microm (E), (3) NaOH-etched with pore size 0.2-0.3 microm and a thin blood plasma coat (EP), (4) electrochemically oxidised with pore size 1-2 microm (O), (5) electrochemically oxidised with pore size 1-2 microm and a thin blood plasma coat (OP). A total of 66 implants were divided into the above-described five groups and inserted for 4 weeks into tibia and femur of 11 rabbits. The implants were evaluated by resonance frequency (RF) measurements at the time of insertion and removal, and analysed histomorphometrically at removal. The RF measurements showed that the implant stability was lower in soft bone compared to dense and increased with time. No significant differences were observed between the different surface modifications. The histomorphometric analysis revealed no statistically significant differences between the implants regarding bone-to-metal contact (BMC) and bone area inside the threads (BA). The above results indicate that thin blood plasma-coated and non-coated screw-shaped titanium implants with turned, NaOH-etched and electrochemically etched surface profiles integrate similarly to bone at 1 month of implantation.
Collapse
Affiliation(s)
- A Göransson
- Department of Biomaterial Science/Institute of Surgical Science, Box 412, Göteborg University, Göteborg 40530, Sweden.
| | | | | | | |
Collapse
|
21
|
Alferiev IS. Novel elastomeric polyurethanes with pendant epoxy groups as highly reactive auxiliary groups for further derivatizations. ACTA ACUST UNITED AC 2002. [DOI: 10.1002/pola.10467] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|
22
|
Davis DH, Giannoulis CS, Johnson RW, Desai TA. Immobilization of RGD to < 1 1 1 > silicon surfaces for enhanced cell adhesion and proliferation. Biomaterials 2002; 23:4019-27. [PMID: 12162335 DOI: 10.1016/s0142-9612(02)00152-7] [Citation(s) in RCA: 90] [Impact Index Per Article: 4.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
Abstract
The ability of biomaterial surfaces to regulate cell behavior requires control over surface chemistry and microstructure. One of the greatest challenges with silicon-based biomedical microdevices such as those recently developed for neural stimulation, implantable encapsulation, biosensors, and drug delivery, is to improve biocompatibility and tissue integration. This may be achieved by modifying the exposed silicon surface with bioactive peptides. In this study, Arg-Gly-Asp (RGD) peptide conjugated surfaces were prepared and characterized. The effect of these surfaces on fibroblast adhesion and proliferation was examined over 4 days. Silicon surfaces coupled with a synthetic RGD peptide, as characterized with X-ray photoelectron spectroscopy and atomic force microscopy, display enhanced cell proliferation and bioactivity. Results demonstrate an almost three-fold greater cell attachment! proliferation on RGD immobilized surfaces compared to unmodified (control) silicon surfaces. Modulating the biological response of inorganic materials such as silicon will allow us to design more appropriate interfaces for implantable diagnostic and therapeutic silicon-based microdevices.
Collapse
Affiliation(s)
- Daniel Hal Davis
- Department of Bioengineering, College of Engineering, University of Illinois at Chicago, 60607, USA
| | | | | | | |
Collapse
|
23
|
Tiwari A, Salacinski HJ, Punshon G, Hamilton G, Seifalian AM. Development of a hybrid cardiovascular graft using a tissue engineering approach. FASEB J 2002; 16:791-6. [PMID: 12039860 DOI: 10.1096/fj.01-0826com] [Citation(s) in RCA: 86] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Abstract
Tissue engineering of endothelial cells (EC) and chemical engineering with anticoagulant moieties has been undertaken in order to improve prosthetic graft patency and thrombogenicity. This was done by covalently bonding a compliant poly(carbonate-urea)urethane graft (MyoLink) with arginine-glycine-aspartate (RGD) or/and heparin (Hep) to ascertain whether EC retention could be improved. The retention of these moieties and EC was assessed after exposure to pulsatile flow. We covalently bonded RGD, Hep, and RGD/Hep onto the luminal surface of MyoLink using spacer arm technology. Narrow-beam X-ray photoelectron spectroscopy was carried out to check the efficiency of the bonding. EC were radiolabeled and seeded onto native MyoLink and with 1) RGD-, 2) Hep-, and 3) RGD/Hep-bonded grafts and exposed to shear stress in a physiological flow circuit for 6 h, which reproduces femoral artery flow waveforms and pulsatility. Results were recorded on a gamma camera imaging system. Viability of cells was tested with a modified Alamar Blue assay (ABA) and scanning electron microscopy for morphological appearance of seeded cells. Experiments were repeated (n=6). RGD, Hep, and RGD/Hep were bonded together in a uniform distribution on the luminal surface of each graft type, and bioactivity of each moiety covalently bonded was very high. In the flow circuit, there was exponential cell retention for the first 60 min of flow for all the grafts, but after 6 h of exposure to pulsatile flow the RGD/Hep-bonded graft had a significantly better cell retention rate than native MyoLink (75.7%+/-2.3 vs. 60.5+/-10.1, P<0.05). ABA test showed that all the seeded cells postexposure to flow were viable, and significantly higher metabolic activity was recorded on a RGD/Hep-bonded graft than with MyoLink-seeded graft (P<0.01). Using RGD/Hep covalently bonded onto graft surfaces improves cell retention and provides an antithrombogenic surface for initial blood flow in vivo until full EC activity develops postseeding. This would allow the development and further improvement of hybrid grafts.
Collapse
Affiliation(s)
- Alok Tiwari
- Tissue Engineering Center, University Department of Surgery, Royal Free and University College Medical School, University College London and The Royal Free Hospital, London, UK
| | | | | | | | | |
Collapse
|
24
|
Cai K, Yao K, Cui Y, Yang Z, Li X, Xie H, Qing T, Gao L. Influence of different surface modification treatments on poly(D,L-lactic acid) with silk fibroin and their effects on the culture of osteoblast in vitro. Biomaterials 2002; 23:1603-11. [PMID: 11922466 DOI: 10.1016/s0142-9612(01)00287-3] [Citation(s) in RCA: 140] [Impact Index Per Article: 6.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
Abstract
The objective of this study was to investigate the efficiency of two treatments for poly(D,L-lactic acid) (PDLLA) surface modification using silk fibroin. one chemical treatment and one physical treatment: 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide (WSC) and entrapment. The properties of control films, WSC-modified and entrapment-treated PDLLA films were investigated by water contact angle measurement and electron spectroscopy for chemical analysis (ESCA). The water-contact angle measurement indicated the change of hydrophilicity and the ESCA analysis suggested that the modified PDLLA film using silk fibroin became enriched with nitrogen atoms. The biocompatibility of PDLLA film might be altered, which in turn would affect the functions of cells that were seeded on it. Therefore, attachment and proliferation of osteoblasts that were seeded on modified PDLLA films and control films were examined. Cell viability was evaluated by the MTT assay and differentiated cell function was assessed by measuring alkaline phosphatase activity. These results suggested that silk fibroin was used to modify PDLLA surface via WSC and that entrapment could improve the interactions between osteoblasts and PDLLA films. The entrapment treatment was more effective thin WSC treatment to accomplish the goal of surface modification.
Collapse
Affiliation(s)
- Kaiyong Cai
- Research Institute of Polymeric Materials, Tianjin University, People's Republic of China
| | | | | | | | | | | | | | | |
Collapse
|
25
|
Cai K, Yao K, Lin S, Yang Z, Li X, Xie H, Qing T, Gao L. Poly(D,L-lactic acid) surfaces modified by silk fibroin: effects on the culture of osteoblast in vitro. Biomaterials 2002; 23:1153-60. [PMID: 11791919 DOI: 10.1016/s0142-9612(01)00230-7] [Citation(s) in RCA: 150] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
The objective of this study was to modify the surface of poly(D,L-lactic acid) (PDLLA) with different molecular weight of silk fibroins, and assess the effects of the modified surfaces on the functions of rat osteoblasts cultured in vitro. The properties of the modified PDLLA surface and the control one were investigated by contact angle and electron spectroscopy for chemical analysis (ESCA). The former indicated the variation of hydrophilicity and the latter suggested that the modified PDLLA film using silk fibroin is enriched with nitrogen atoms. The biocompatibility of the PDLLA film may be altered and in turn affects the seeded cell functions. Therefore, attachment and proliferation of osteoblasts seeded on the modified PDLLA films and the control one were examined. Cell morphologies on these films were studied by scanning electron microscopy (SEM) and cell viability was evaluated by MTT assay. In addition, differentiated cell function was assessed by measuring the alkaline phosphatase (ALP) activity. These results suggest that the silk fibroin-modified PDLLA surface can improve the interaction between osteoblasts and the PDLLA films.
Collapse
Affiliation(s)
- Kaiyong Cai
- Research Institute of Polymeric Materials, Tianjin University, People's Republic of China
| | | | | | | | | | | | | | | |
Collapse
|
26
|
Carlisle ES, Mariappan MR, Nelson KD, Thomes BE, Timmons RB, Constantinescu A, Eberhart RC, Bankey PE. Enhancing hepatocyte adhesion by pulsed plasma deposition and polyethylene glycol coupling. TISSUE ENGINEERING 2000; 6:45-52. [PMID: 10941200 DOI: 10.1089/107632700320883] [Citation(s) in RCA: 93] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Abstract
Decreased hepatocyte adhesion to polymeric constructs limits the function of tissue engineered hepatic assist devices. We grafted adhesion peptides (RGD and YIGSR) to polycaprolactone (PCL) and poly-L-lactic acid (PLLA) in order to mimic the in vivo extracellular matrix and thus enhance hepatocyte adhesion. Peptide grafting was done by a novel technique in which polyethylene glycol (PEG)-adhesion peptide was linked to allyl-amine coated on the surface of PCL and PLLA by pulsed plasma deposition (PPD). Peptide grafting density, quantified by radio-iodinated tyrosine in YIGSR, was 158 fmol/cm(2) on PLLA and 425 fmol/cm(2) on PCL surfaces. The adhesion of hepatocytes was determined by plating 250,000 hepatocytes/well (test substrates were coated on 12 well plates) and quantifying the percentage of adhered cells after 6 h by MTT assay. Adhesion on PCL surfaces was significantly enhanced (p < 0.05) by both YIGSR (percentage of adhered cells = 53 +/- 7%) and RGD (53 +/- 12%) when compared to control surfaces (31 +/- 8%). Hepatocyte adhesion on PLLA was significantly (p < 0.05) enhanced on PLLA-PEG-RGD surfaces (76 +/- 14%) compared to control surfaces (42 +/- 19%) and more (68 +/- 25%) but not statistically significant (p = 0.15) on PLLA-PEG-YIGSR surfaces compared to control surfaces. These results indicate that hepatocyte adhesion to PCL and PLLA based polymeric surfaces can be enhanced by a novel adhesion peptide grafting technique using pulsed plasma deposition and PEG cross-linking.
Collapse
Affiliation(s)
- E S Carlisle
- Joint Program in Biomedical Engineering, University of Texas Southwestern Medical Center, Dallas, Texas 75235, USA
| | | | | | | | | | | | | | | |
Collapse
|
27
|
Abstract
A goal of current implantology research is to design devices that induce controlled, guided, and rapid healing. In addition to acceleration of normal wound healing phenomena, endosseous implants should result in formation of a characteristic interfacial layer and bone matrix with adequate biomechanical properties. To achieve these goals, however, a better understanding of events at the interface and of the effects biomaterials have on bone and bone cells is needed. Such knowledge is essential for developing strategies to optimally control osseointegration. This paper reviews current knowledge of the bone-biomaterial interface and methods being investigated for controlling it. Morphological studies have revealed the heterogeneity of the bone-implant interface. One feature often reported, regardless of implant material, is an afibrillar interfacial zone, comparable to cement lines and laminae limitantes at natural bone interfaces. These electron-dense interfacial layers are rich in noncollagenous proteins, such as osteopontin and bone sialoprotein. Several approaches, involving alteration of surface physicochemical, morphological, and/or biochemical properties, are being investigated in an effort to obtain a desirable bone-implant interface. Of particular interest are biochemical methods of surface modification, which immobilize molecules on biomaterials for the purpose of inducing specific cell and tissue responses or, in other words, to control the tissue-implant interface with biomolecules delivered directly to the interface. Although still in its infancy, early studies indicate the value of this methodology for controlling cell and matrix events at the bone-implant interface.
Collapse
Affiliation(s)
- D A Puleo
- Center for Biomedical Engineering, University of Kentucky, Lexington 40506-0070, USA.
| | | |
Collapse
|
28
|
Ahluwalia A, Basta G, Ricci D, Francesconi R, Domenici C, Grattarola M, Palchetti L, Preininger C, De Rossi D. Langmuir-Blodgett films of antibodies as mediators of endothelial cell adhesion on polyurethanes. JOURNAL OF BIOMATERIALS SCIENCE. POLYMER EDITION 1999; 10:295-304. [PMID: 10189098 DOI: 10.1163/156856299x00360] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
Abstract
The effect of endothelial cell adhesion on polyurethanes coated with Langmuir-Blodgett antibody films has been examined. The films were cross-linked with glutaraldehyde with the aim of providing a densely packed and covalently linked two-dimensional antibody network on the polyurethane surfaces. Our results demonstrate that although neither of the two polyurethanes examined were entirely suited to cellular adhesion, Langmuir-Blodgett antibody films, cross-linked with small concentrations of glutaraldehyde, are more suitable for endothelial cell adhesion than surfaces free of antibody.
Collapse
Affiliation(s)
- A Ahluwalia
- Centro E. Piaggio, University of Pisa, Italy.
| | | | | | | | | | | | | | | | | |
Collapse
|
29
|
Bearinger JP, Castner DG, Healy KE. Biomolecular modification of p(AAm-co-EG/AA) IPNs supports osteoblast adhesion and phenotypic expression. JOURNAL OF BIOMATERIALS SCIENCE. POLYMER EDITION 1998; 9:629-52. [PMID: 9686332 DOI: 10.1163/156856298x00064] [Citation(s) in RCA: 80] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
Abstract
Interpenetrating polymer networks (IPNs) were designed to resist materials fouling caused by non-specific protein adsorption, and indiscriminate cell or bacterial adhesion. These IPNs were thin adherent films (approximately 20 nm) comprised of acrylamide (AAm), ethylene glycol (EG), and acrylic acid (AA) grafted to either silicon waters or quartz substrates via photoinitiated free radical polymerization. These networks were further modified to promote specific cell adhesion by tethering bioactive groups such as peptides that mimic cell-binding domains found on extracellular matrix molecules. As a specific example of biomolecular surface engineering, peptides from the cell-binding domain of bone sialoprotein were tethered to a p(AAm-co-EG/AA) IPN to control cell behavior at the surface. The networks were characterized by contact angle measurements, spectroscopic ellipsometry, and X-ray photoelectron spectroscopy to convey information on IPN wettability, thickness, and chemistry. The surface characterization data supported the theory that the PEG/AA layer formed an IPN with the underlying p(AAm) network, and after graft modification of this IPN with diamino PEG (PEG(NH2)2), the PEG(NH2)2 chains were enriched at the surface. Rat calvarial osteoblasts attached to Arg-Gly-Asp (RGD) modified IPNs at levels significantly greater than on clean quartz, Arg-Gly-Glu (RGE) modified, or the PEG(NH2)2 modified IPN, with or without serum in the media. Cells maintained in media containing 15% fetal bovine serum (FBS) proliferated, exhibited nodule formation, and generated sheets of mineralized extracellular matrix (ECM) with the addition on beta-glycerophosphate to the media. Cell adhesion and mineralized ECM formation were specifically dependent on the peptide sequence present at the surface.
Collapse
Affiliation(s)
- J P Bearinger
- Division of Biological Materials, Northwestern University Dental School, Chicago, IL 60611-3008, USA
| | | | | |
Collapse
|
30
|
Shakesheff K, Cannizzaro S, Langer R. Creating biomimetic micro-environments with synthetic polymer-peptide hybrid molecules. JOURNAL OF BIOMATERIALS SCIENCE. POLYMER EDITION 1998; 9:507-18. [PMID: 9648030 DOI: 10.1163/156856298x00596] [Citation(s) in RCA: 106] [Impact Index Per Article: 4.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
Abstract
In designing polymers that can act as tissue engineering templates it is beneficial to consider methods of mimicking the natural support structures used by the human body to guide the behavior and development of cells within tissues. The well-known RGD cell adhesion ligand provides a simple mechanism of creating polymer surfaces that mimic the extracellular matrix. This paper considers the methods that have been used to attach such motifs to synthetic polymers. In general there are two strategies: the formation of polymer-peptide hybrid molecules, or the immobilization of the ligand on the fabricated surface of the polymer. The three major synthetic strategies of creating polymer-peptide hybrids are reviewed.
Collapse
Affiliation(s)
- K Shakesheff
- Department of Chemical Engineering, Massuchusetts Institute of Technology, Cambridge 02139, USA
| | | | | |
Collapse
|
31
|
Cook AD, Pajvani UB, Hrkach JS, Cannizzaro SM, Langer R. Colorimetric analysis of surface reactive amino groups on poly(lactic acid-co-lysine):poly(lactic acid) blends. Biomaterials 1997; 18:1417-24. [PMID: 9375843 DOI: 10.1016/s0142-9612(97)00075-6] [Citation(s) in RCA: 32] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Abstract
The quantification of functional amino (NH2) groups on poly(lactic acid-co-lysine):(poly(L-lactic acid (PLAL:PLA) blends was performed using a colorimetric assay based on the reaction of sulpho-succinimidyl-4-O-(4,4'-dimethoxytrityl)-butyrate (sulpho-SDTB) with primary amino groups. The colorimetric assay was used to assess the available reactive sites for coupling of biologically active species to PLAL. Blends were created that contained from 10 to 70 wt% poly(lactic acid-co-lysine). Bulk lysine contents within the blends were determined by amino acid analysis and ranged from 9.1 micromol g(-1) to 52.9 micromol g(-1) for blends created using PLA of 100000g mol(-1) molecular weight. Surface amino group concentrations on the same set of blends ranged from 0.23 to 1.45 nmol cm(-2). Similar surface amino groups concentrations were measured on blends using 50000, 200000 and 300000g mol(-1) poly(lactic acid). Non-specific interactions of the colorimetric assay reagents with the PLAL-containing blends were measured on blends prepared from epsilon-amino protected PLAL and 100000g mol(-1) PLA. The presence of amino groups within the top 50 angstroms was confirmed by X-ray photoelectron spectroscopy.
Collapse
Affiliation(s)
- A D Cook
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge 02139, USA
| | | | | | | | | |
Collapse
|
32
|
Cook AD, Hrkach JS, Gao NN, Johnson IM, Pajvani UB, Cannizzaro SM, Langer R. Characterization and development of RGD-peptide-modified poly(lactic acid-co-lysine) as an interactive, resorbable biomaterial. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH 1997; 35:513-23. [PMID: 9189829 DOI: 10.1002/(sici)1097-4636(19970615)35:4<513::aid-jbm11>3.0.co;2-c] [Citation(s) in RCA: 243] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Abstract
The design of biomaterials containing specific ligands on the surface offers the possibility of creating materials that can interact with and potentially control mammalian cell behavior. Biodegradable materials further provide the significant advantage that the polymer will disappear in vivo, obviating long-term negative tissue responses as well as the need for retrieval. In earlier studies we synthesized and characterized arginine-glycine-aspartic acid (RGD) peptide-modified poly(lactic acid-co-lysine) (PLAL). In this study, both bulk properties and surface features have been characterized, with a focus on surface analysis as a means of interpreting observed changes in cell behavior. Bulk peptide attachments were performed using 1,1'-carbonyldiimidazole (CDI). Amino groups were measured using colorimetric assays and X-ray photoelectron spectroscopy (XPS). Peptides were measured by incorporating iodine into the peptide as a distinct elemental marker for use with XPS. Typical samples contained 13 +/- 4 pmol/cm2 of amino groups and 4 +/- 0.2 pmol/ cm2 of peptides, as calculated from XPS measurements of nitrogen and iodine. The wettability and crystallinity of the samples were determined by contact angles and differential scanning calorimetry, respectively. Wettability and crystallinity were not altered by the incorporation of lysine or peptides. After incubating bovine aortic endothelial (BAE) cells for 4 h on surfaces with RGD-containing peptides, the mean spread cell area increased from 77 +/- 2 microns2 to 405 +/- 29 microns2 compared to 116 +/- 11 microns2 on poly(lactic acid), 87 +/- 4 microns2 on PLAL, and 105 +/- 4 microns2 on surfaces with RDG-containing (control) peptides. The significance of this work is that the first synthetic interactive, resorbable biomaterial has been developed, and use of this material to control cell behavior has been demonstrated.
Collapse
Affiliation(s)
- A D Cook
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge 02139, USA
| | | | | | | | | | | | | |
Collapse
|
33
|
Mikulec LJ, Puleo DA. Use of p-nitrophenyl chloroformate chemistry to immobilize protein on orthopedic biomaterials. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH 1996; 32:203-8. [PMID: 8884496 DOI: 10.1002/(sici)1097-4636(199610)32:2<203::aid-jbm8>3.0.co;2-x] [Citation(s) in RCA: 33] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
Abstract
Biochemical surface modification involves covalently immobilizing biomolecules onto biomaterial surfaces to induce specific biological responses. This approach may be useful for enhancing the fixation of orthopedic implants. p-Nitrophenyl chloroformate (p-NPC) was used to immobilize protein on bulk samples of Co-Cr-Mo and Ti-6Al-4V. Activation of both materials was dependent on the concentration of p-NPC, with a maximum of approximately 1.5 active groups/nm2 of nominal surface area. Trypsin was used as a model protein because much is known about its structure and mode of action. Derivatization with 0.65 mg p-NPC/cm2 resulted in significantly greater enzymatic activity (7.4 BAEE [N-(alpha)-benzoyl-L-arginine ethyl ester hydrochloride] units) on the Co-Cr-Mo samples compared with higher concentrations of p-NPC (5 BAEE units) and with simple adsorption of trypsin (1.5 BAEE units). An activity of 10.5 BAEE units was measured on both adsorbed and p-NPC-activated Ti-6Al-4V, with the exception of samples derivatized with 1.95 mg p-NPC/cm2, on which activity was significantly lower (4 BAEE units). In probing the linkages between trypsin and biomaterial by treatment with chaotropic agents, guanidine hydrochloride (GuHCl) was observed to eliminate more enzymatic activity than was urea. On Co-Cr-Mo samples, GuHCl removed nearly all the trypsin activity, while urea significantly decreased the activity only at a concentration of 0.65 mg p-NPC/cm2. Treatment of Ti-6Al-4V samples with GuHCl caused a trend of decreasing activity with increasing concentration of p-NPC, whereas urea had no effect on immobilized trypsin activity.
Collapse
Affiliation(s)
- L J Mikulec
- Center for Biomedical Engineering, 205 Wenner-Gren Research Lab, University of Kentucky, Lexington 40506-0070, USA
| | | |
Collapse
|
34
|
Abstract
Although synthetic materials are now widely used in implanted medical devices, they are not engineered for recognition and specificity. This article considers the design of polymer surfaces that might be specifically recognized and trigger normal healing pathways. The technological advances that will contribute to biorecognition biomaterials include surfaces to inhibit non-specific interactions, self-assembly to create ordered surface structures and strategies to place recognition sites on surfaces by random arrays of groups and by templates.
Collapse
Affiliation(s)
- B D Ratner
- Center for Bioengineering, University of Washington, Seattle 98195, USA
| |
Collapse
|
35
|
Glass JR, Dickerson KT, Stecker K, Polarek JW. Characterization of a hyaluronic acid-Arg-Gly-Asp peptide cell attachment matrix. Biomaterials 1996; 17:1101-8. [PMID: 8718970 DOI: 10.1016/0142-9612(96)85911-4] [Citation(s) in RCA: 57] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
We have developed a method to modify cross-linked hyaluronic acid with peptides containing the Arg-Gly-Asp sequence. The material created by this process is a three-dimensional porous matrix capable of supporting integrin receptor-mediated cell attachment. Peptide density can be controlled by varying the reaction conditions during peptide immobilization. Following cell attachment, cells actively proliferate and colonize the pores of the matrix. This material should prove useful for the maintenance of cells on a chemically defined three-dimensional substrate or as a scaffold for enhancing tissue repair.
Collapse
Affiliation(s)
- J R Glass
- Telios Pharmaceuticals, Inc., San Diego, CA 92121, USA
| | | | | | | |
Collapse
|
36
|
Abstract
Because of the limited mechanical properties of tissue substitutes formed by culturing cells on polymeric scaffolds, other approaches to tissue engineering must be explored for applications that require complete and immediate ability to bear weight, e.g. total joint replacements. Biochemical surface modification offers a way to partially regulate events at the bone-implant interface to obtain preferred tissue responses. Tresyl chloride, gamma-aminopropyltriethoxysilane (APS) and p-nitrophenyl chloroformate (p-NPC) immobilization schemes were used to couple a model enzyme, trypsin, on bulk samples of Co-Cr-Mo. For comparison, samples were simply adsorbed with protein. The three derivatization schemes resulted in different patterns and levels of activity. Tresyl chloride was not effective in immobilizing active enzyme on Co-Cr-Mo. Aqueous silanization with 12.5% APS resulted in optimal immobilized activity. Activity on samples derivatized with 0.65 mg p-NPC cm-2 was four to five times greater than that on samples simple adsorbed with enzyme or optimally derivatized with APS and was about eight times that on tresylated samples. This work demonstrates that, although different methods have different effectiveness, chemical derivatization can be used to alter the amount and/or stability of biomolecules immobilized on the surface of Co-Cr-Mo.
Collapse
Affiliation(s)
- D A Puleo
- Center for Biomedical Engineering, University of Kentucky, Lexington 40506, USA
| |
Collapse
|
37
|
Puleo DA. Activity of enzyme immobilized on silanized Co-Cr-Mo. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH 1995; 29:951-7. [PMID: 7593038 DOI: 10.1002/jbm.820290806] [Citation(s) in RCA: 44] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/26/2023]
Abstract
The surface of an orthopedic biomaterial was modified by the covalent immobilization of biomolecules. Derivatization of Co-Cr-Mo samples with organic and aqueous solutions of gamma-aminopropyltriethoxysilane (APS) resulted in a concentration-dependent number of reactive NH2 groups on the surface available for coupling to protein. The enzyme trypsin was used as a model biomolecule to investigate the effect of immobilization on proteolytic activity. Trypsin was coupled to the silanized samples by formation of Schiff's base linkages via glutaraldehyde. The nature of the interaction between trypsin and biomaterial was then probed by treatment with concentrated guanidine hydrochloride (GuHCl) and urea. Residual activity (following treatment with chaotropic agents) of trypsin immobilized on silanized Co-Cr-Mo was dependent both on the nature of the silane solution and on the type of chaotropic agent. Organic silanization with APS required a minimum density of approximately 49 NH2 per nm2 of nominal surface area (> 0.021 M APS) for residual activity of immobilized trypsin. For aqueous silanization, approximately 5.4 NH2/nm2 (0.51 M APS) resulted in maximal residual trypsin activity. Treatment with GuHCl removed more trypsin activity from Co-Cr-Mo samples silanized with organic solutions of APS than did treatment with urea. On the contrary, with aqueous silanization the samples possessed greater residual activity following treatment with GuHCl than following urea. Compared to simple adsorption with protein onto Co-Cr-Mo, both methods of silanization with APS resulted in superior residual immobilized enzyme activity.
Collapse
Affiliation(s)
- D A Puleo
- Center for Biomedical Engineering, University of Kentucky, Lexington 40506-0070, USA
| |
Collapse
|
38
|
Hubbell JA. Biomaterials in tissue engineering. BIO/TECHNOLOGY (NATURE PUBLISHING COMPANY) 1995; 13:565-76. [PMID: 9634795 DOI: 10.1038/nbt0695-565] [Citation(s) in RCA: 636] [Impact Index Per Article: 21.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
Abstract
Biomaterials play a pivotal role in field of tissue engineering. Biomimetic synthetic polymers have been created to elicit specific cellular functions and to direct cell-cell interactions both in implants that are initially cell-free, which may serve as matrices to conduct tissue regeneration, and in implants to support cell transplantation. Biomimetic approaches have been based on polymers endowed with bioadhesive receptor-binding peptides and mono- and oligosaccharides. These materials have been patterned in two- and three-dimensions to generate model multicellular tissue architectures, and this approach may be useful in future efforts to generate complex organizations of multiple cell types. Natural polymers have also played an important role in these efforts, and recombinant polymers that combine the beneficial aspects of natural polymers with many of the desirable features of synthetic polymers have been designed and produced. Biomaterials have been employed to conduct and accelerate otherwise naturally occurring phenomena, such as tissue regeneration in wound healing in the otherwise healthy subject; to induce cellular responses that might not be normally present, such as healing in a diseased subject or the generation of a new vascular bed to receive a subsequent cell transplant; and to block natural phenomena, such as the immune rejection of cell transplants from other species or the transmission of growth factor signals that stimulate scar formation. This review introduces the biomaterials and describes their application in the engineering of new tissues and the manipulation of tissue responses.
Collapse
Affiliation(s)
- J A Hubbell
- Division of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena 91125, USA.
| |
Collapse
|
39
|
Drumheller PD, Elbert DL, Hubbell JA. Multifunctional poly(ethylene glycol) semi-interpenetrating polymer networks as highly selective adhesive substrates for bioadhesive peptide grafting. Biotechnol Bioeng 1994; 43:772-80. [DOI: 10.1002/bit.260430812] [Citation(s) in RCA: 80] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
|
40
|
Lin HB, Sun W, Mosher DF, García-Echeverría C, Schaufelberger K, Lelkes PI, Cooper SL. Synthesis, surface, and cell-adhesion properties of polyurethanes containing covalently grafted RGD-peptides. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH 1994; 28:329-42. [PMID: 8077248 DOI: 10.1002/jbm.820280307] [Citation(s) in RCA: 156] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/28/2023]
Abstract
In an attempt to improve endothelial cell adhesion and growth on a polyurethane copolymer, cell adhesive RGD-containing peptides were grafted to the polymer backbone. Two peptide grafting reaction schemes, including one-step and two-step approaches, were developed. FTIR and amino acid analysis confirmed that coupling of the peptide to the polyurethane backbone was achieved by both the one-step and two-step methods. However, the two-step approach showed a higher peptide coupling efficiency and resulted in better control of the orientation of the grafted peptide. The two-step reaction scheme was used to prepare Gly-Arg-Gly-Asp-Ser-Tyr (GRGDSY), Gly-Arg-Gly-Asp-Val-Tyr (GRGDVY), and Gly-Arg-Gly-Glu-Ser-Tyr (GRGESY) peptide-grafted polyurethanes with two different peptide densities (100 and 250 mumol/g polymer). Dynamic contact angle measurements indicated that the surfaces of the peptide-grafted polyurethanes were more hydrophilic than the starting and carboxylated versions of the precursor polyurethane. In addition, the surface hydrophilicity of the peptide-grafted polymers increased with increasing bulk peptide density. Electron spectroscopy for chemical analysis suggested that the grafted peptide was present at the polymer-air interface, in vacuo, for the peptide-grafted polyurethanes. The surface peptide density appeared to correlate with the incorporated peptide density in the bulk. In vitro endothelial cell adhesion experiments showed that, without the presence of serum in culture medium, the GRGDSY- and GRGDVY-grafted polyurethanes dramatically enhanced cell attachment and spreading compared with the starting, carboxylated, and GRGESY-grafted polymers. Increasing the peptide density from 100 to 250 mumol/g polymer for the GRGDSY- and GRGDVY-grafted polyurethanes resulted in an increase in cell attachment. With approximately the same peptide density (100 or 250 mumol/g polymer), the GRGDVY-grafted polymers supported more adherent cells than did the GRGDSY-grafted polymers. Similar trends were observed in the in vitro endothelial cell growth studies using culture medium containing serum and endothelial cell growth supplement. The GRGDSY- and GRGDVY-grafted polyurethanes promoted more cell growth than did the starting polyurethane. However, the presence of adhesive serum proteins and growth factor diminished the differences between the cell-adhesive peptide grafted polymers and the GRGESY-grafted polymers.
Collapse
Affiliation(s)
- H B Lin
- Department of Chemical Engineering, University of Wisconsin-Madison 53706
| | | | | | | | | | | | | |
Collapse
|
41
|
Ratner BD. New ideas in biomaterials science--a path to engineered biomaterials. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH 1993; 27:837-50. [PMID: 8360211 DOI: 10.1002/jbm.820270702] [Citation(s) in RCA: 321] [Impact Index Per Article: 10.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/30/2023]
Abstract
Our existing biomaterials, although demonstrating generally satisfactory clinical performance, were developed based upon a trial-and-error optimization approach rather than being engineered to produce the desired interfacial reaction. Most biomaterials exhibit a nonspecific biological reaction, with sluggish kinetics and a broad spectrum of active processes simultaneously occurring. This article describes materials science nanotechnology, and molecular biology techniques that may permit the synthesis of precisely engineered surfaces. Such surfaces might demonstrate rapid, precise reactions with proteins and cells. This opens the question, "what type of specific surface bioreactions do we want?" New thoughts on biocompatibility are presented that may be helpful in the design of specific surfaces yielding precise, defined biological responses.
Collapse
Affiliation(s)
- B D Ratner
- Center for Bioengineering, University of Washington, Seattle 98195
| |
Collapse
|
42
|
Hirano Y, Okuno M, Hayashi T, Goto K, Nakajima A. Cell-attachment activities of surface immobilized oligopeptides RGD, RGDS, RGDV, RGDT, and YIGSR toward five cell lines. JOURNAL OF BIOMATERIALS SCIENCE. POLYMER EDITION 1993; 4:235-43. [PMID: 8476793 DOI: 10.1163/156856293x00546] [Citation(s) in RCA: 63] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/31/2023]
Abstract
Tetrapeptides, Arg-Gly-Asp-Ser (RGDS), Arg-Gly-Asp-Val (RGDV), and Arg-Gly-Asp-Thr (RGDT), respectively, appearing in the cell-attachment domains of fibronectin, vitronectin, and collagen, and pentapeptide Tyr-Ile-Gly-Ser-Arg (YIGSR) appearing in B1 chain of laminin, were synthesized by liquid-phase procedure. Bioactivities of RGD, RGDX (X = S, V and T), YIGSR, and YIGSR-NH2 as cell recognition determinants were investigated by cell-attachment test using these oligopeptides immobilized to ethylene-acrylic acid copolymer (PEA) film. The cell lines used were A431, NRK, CHO-K1, HeLa.S3, and RLC-16 cells. It was found that the residue X in RGDX plays an important role for cell-attachment activity of RGDX, and, regarding YIGSR, introduction of NH2 residue at the C-terminal of the pentapeptide enhances the cell-attachment activity.
Collapse
Affiliation(s)
- Y Hirano
- Department of Applied Chemistry, Osaka Institute of Technology, Japan
| | | | | | | | | |
Collapse
|
43
|
Lin HB, Lewis KB, Leach-Scampavia D, Ratner BD, Cooper SL. Surface properties of RGD-peptide grafted polyurethane block copolymers: variable take-off angle and cold-stage ESCA studies. JOURNAL OF BIOMATERIALS SCIENCE. POLYMER EDITION 1993; 4:183-98. [PMID: 8476790 DOI: 10.1163/156856293x00519] [Citation(s) in RCA: 30] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/31/2023]
Abstract
Variable take-off angle and cold-stage ESCA measurements were utilized to analyze the surface composition of five polyurethane block copolymers. The polymers studied included a PTMO-polyurethane control, a carboxylated version of the control polyurethane, and three different peptide grafted (GRGESY, GRGDSY, and GRGDVY) polyurethanes. On dry samples the nitrogen signal detected using ESCA decreased with increasing take-off angle (i.e. as the specimen was probed closer to the surface) for all five polymers. This was believed to be due to the depletion of nitrogen-containing urethane hard segments at the surface. For all five polymers, the surface nitrogen concentration, associated with the hard segment, increased upon hydration. A greater increase of nitrogen concentration was observed for the peptide grafted polymers which suggests that grafting of the hydrophilic peptides to the polyurethane augments the hard segment enrichment at the surface upon hydration. Upon dehydration, the nitrogen concentration decreased for all five polymers suggesting migration of the more hydrophobic PTMO soft segment to the surface. In vitro endothelial cell adhesion showed an increase of cell attachment on prehydrated RGD-containing peptide grafted polyurethanes, but not on the other polymers. This result suggests an enhancement of peptide density at the aqueous interface, in good agreement with the ESCA studies.
Collapse
Affiliation(s)
- H B Lin
- Department of Chemical Engineering, University of Wisconsin-Madison 53706
| | | | | | | | | |
Collapse
|
44
|
Lin HB, García-Echeverría C, Asakura S, Sun W, Mosher DF, Cooper SL. Endothelial cell adhesion on polyurethanes containing covalently attached RGD-peptides. Biomaterials 1992; 13:905-14. [PMID: 1477259 DOI: 10.1016/0142-9612(92)90113-3] [Citation(s) in RCA: 119] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
Abstract
Peptides based on cell-adhesive regions of fibronectin, Arg-Gly-Asp-Ser (RGDS), and vitronectin, Arg-Gly-Asp-Val (RGDV), were covalently bound to a polyurethane backbone via amide bonds. Nuclear magnetic resonance (NMR) and Fourier-transform infrared (FTIR) spectroscopies were used to monitor the reactions. The amount of grafted peptide was determined by amino acid analysis. X-ray photoelectron spectroscopy (XPS) suggested the presence of the grafted peptide at the polymer-air interface in vacuo. Dynamic contact angle analysis showed that, in water, the peptide-grafted polyurethane surfaces were more polar than the underivatized polyurethane indicating enrichment of peptide groups at the surface. The attachment and spreading of human umbilical vein endothelial cells (HUVECs) on the underivatized and peptide-grafted polyurethanes was investigated. The GRGDSY- and GRGDVY-grafted substrates supported cell adhesion and spreading even without serum in the culture medium. The GRGDVY-grafted substrate supported a larger number of adherent cells and a higher extent of cell spreading than the GRGDSY-grafted substrate. These RGD-containing peptide-grafted polyurethane copolymers may be useful in providing an easily prepared cell-adhesive substrate for various biomaterial applications.
Collapse
Affiliation(s)
- H B Lin
- Department of Chemical Engineering, University of Wisconsin, Madison 53706
| | | | | | | | | | | |
Collapse
|