Rapid and economical drug resistance profiling with Nanopore MinION for clinical specimens with low bacillary burden of Mycobacterium tuberculosis

Diagnostic accuracy of nanopore sequencing for detecting Mycobacterium tuberculosis and drug-resistant strains: a systematic review and meta-analysis

Tuberculosis (TB), caused by Mycobacterium tuberculosis (MTB) infection, remains a significant public health threat. The timeliness, portability, and capacity of nanopore sequencing for diagnostics can aid in early detection and drug susceptibility testing (DST), which is crucial for effective TB control. This study synthesized current evidence on the diagnostic accuracy of the nanopore sequencing technology in detecting MTB and its DST profile. A comprehensive literature search in PubMed, Scopus, MEDLINE, Cochrane, EMBASE, Web of Science, AIM, IMEMR, IMSEAR, LILACS, WPRO, HERDIN Plus, MedRxiv, and BioRxiv was performed. Quality was assessed using the Quality Assessment of Diagnostic Accuracy Studies-2 tool. Pooled sensitivity, specificity, predictive values (PV), diagnostic odds ratio (DOR), and area under the curve (AUC) were calculated. Thirty-two studies were included; 13 addressed MTB detection only, 15 focused on DST only, and 4 examined both MTB detection and DST. No study used Flongle or PromethION. Seven studies were eligible for meta-analysis on MTB detection and five for DST; studies for MTB detection used GridION only while those for DST profile used MinION only. Our results indicate that GridION device has high sensitivity [88.61%; 95% CI (83.81-92.12%)] and specificity [93.18%; 95% CI (85.32-96.98%)], high positive predictive value [94.71%; 95% CI (89.99-97.27%)], moderately high negative predictive value [84.33%; 95% CI (72.02-91.84%)], and excellent DOR [107.23; 95% CI (35.15-327.15)] and AUC (0.932) in detecting MTB. Based on DOR and AUC, the MinION excelled in detecting pyrazinamide and rifampicin resistance; however, it underperformed in detecting isoniazid and ethambutol resistance. Additional studies will be needed to provide more precise estimates for MinION's sensitivity in detecting drug-resistance, as well as DOR in detecting resistance to pyrazinamide, streptomycin, and ofloxacin. Studies on detecting resistance to bedaquiline, pretomanid, and linezolid are lacking. Subgroup analyses suggest that overall accuracy of MTB detection tends to be higher with prospective study design and use of standards other than CSTB (Chinese national standard for diagnosing TB). Sensitivity analyses reveal that retrospective study design, use of GridION, and use of Illumina whole-genome sequencing (WGS) decrease overall accuracy in detecting any drug-resistant MTB. Findings from both types of analyses, however, should be interpreted with caution because of the low number of studies and uneven distribution of studies in each subgroup.

Development and Comprehensive Evaluation of Culture-Independent, Long Amplicon-Based Targeted Next-Generation Sequencing Methods for Predicting Antimicrobial Resistance in Tuberculosis

The great variety of antimicrobial resistance (AMR) profiles among tuberculosis (TB) patients necessitates a comprehensive detection method. This study developed culture-independent, long amplicon-based targeted next-generation sequencing (tNGS) methods for predicting AMR across 16 drugs within the Mycobacterium tuberculosis complex (MTBC). Multiplex PCR amplification was employed to enrich 20 gene regions, with sequencing performed on either the Oxford Nanopore Technologies (ONT) or Illumina platforms. Customized bioinformatics pipelines provide a streamlined process from raw data to clinician-friendly reports. The ONT tNGS method has been optimized, and its performance has been thoroughly evaluated, utilizing Q20+ chemistry in combination with the R10.4.1 flow cell. It requires only 15 high-quality reads per target gene to accurately identify all variants, with the turnaround time taking 4 h and 50 min. Studies confirmed that this method effectively identifies Mycobacterium species and was highly resistant to interference from other clinical pathogens. To ensure optimal coverage, it is recommended to input at least 500 copies of the genome and sequence 500MB of high-quality FASTQ data. Diagnostic performance evaluations demonstrate that this method achieves 98.35% concordance with phenotypic drug susceptibility testing (pDST) and is consistent with the results obtained from Xpert MTB/RIF assays. The design of long amplicons not only ensures comprehensive coverage of target regions but also simplifies primer design, facilitating compatibility with various sequencing platforms. Compared with previous studies, the optimized ONT tNGS method in this study significantly improves turnaround time, detection accuracy, and the comprehensive coverage of mutations associated with AMR.

Tuberculous meningitis diagnosis and treatment: classic approaches and high-throughput pathways

Tuberculous meningitis (TBM), a severe form of non-purulent meningitis caused by Mycobacterium tuberculosis (Mtb), is the most critical extrapulmonary tuberculosis (TB) manifestation, with a 30-40% mortality rate despite available treatment. The absence of distinctive clinical symptoms and effective diagnostic tools complicates early detection. Recent advancements in nucleic acid detection, genomics, metabolomics, and proteomics have led to novel diagnostic approaches, improving sensitivity and specificity. This review focuses on nucleic acid-based methods, including Xpert Ultra, metagenomic next-generation sequencing (mNGS), and single-cell sequencing of whole brain Tissue, alongside the diagnostic potential of metabolomic and proteomic biomarkers. By evaluating the technical features, diagnostic accuracy, and clinical applicability, this review aims to inform the optimization of TBM diagnostic strategies and explores the integration and clinical translation of multi-omics technologies.

Potential of nanopore sequencing for tuberculosis diagnosis and drug resistance detection

OBJECTIVES

This study evaluates the effectiveness of nanopore sequencing for accurate detection of Mycobacterium tuberculosis pathogens and drug resistance mutations in clinical specimens.

METHODS

A retrospective analysis of 2,421 specimens from suspected tuberculosis patients admitted to Xi'an Chest Hospital from 2022 to 2023 was conducted, with 131 specimens undergoing via real-time, fluorescence-based quantitative Polymerase Chain Reaction (qPCR), simultaneous amplification and testing RNA (RNA), Mycobacterium culture, Mycobacterium smear, and nanopore sequencing. Employing clinical tuberculosis diagnoses as the gold standard, sensitivity, specificity, positive predictive value, negative predictive value, concordance rate, and Kappa coefficient were measured for the five detection techniques. We compared nanopore sequencing with the Melting Curve method to detect drug-resistant gene mutations.

RESULTS

Nanopore sequencing has a significantly higher sensitivity (0.786) for tuberculosis diagnosis compared to qPCR (0.411), RNA (0.411), Mycobacterium culture (0.402), and Mycobacterium smear (0.241), against the gold-standard clinical diagnosis. It also exhibited a greater concordance rate (0.809) and Kappa coefficient (0.488), and outperformed the other methods in terms of the area under the ROC curve. Nanopore sequencing surpassed the Melting Curve method in identifying drug-resistant mutations.

CONCLUSION

Nanopore sequencing significantly enhances the detection of tuberculosis pathogens and drug-resistant genes.

Targeted next-generation sequencing to diagnose drug-resistant tuberculosis: a systematic review and meta-analysis

BACKGROUND

Targeted next-generation sequencing (NGS) can rapidly and simultaneously detect mutations associated with resistance to tuberculosis drugs across multiple gene targets. The use of targeted NGS to diagnose drug-resistant tuberculosis, as described in publicly available data, has not been comprehensively reviewed. We aimed to identify targeted NGS assays that diagnose drug-resistant tuberculosis, determine how widely this technology has been used, and assess the diagnostic accuracy of these assays.

METHODS

In this systematic review and meta-analysis, we searched MEDLINE, Embase, Cochrane Library, Web of Science Core Collection, Global Index Medicus, Google Scholar, ClinicalTrials.gov, and the WHO International Clinical Trials Registry Platform for published and unpublished reports on targeted NGS for drug-resistant tuberculosis from Jan 1, 2005, to Oct 14, 2022, with updates to our search in Embase and Google Scholar until Feb 13, 2024. Studies eligible for the systematic review described targeted NGS approaches to predict drug resistance in Mycobacterium tuberculosis infections using primary samples, reference strain collections, or cultured isolates from individuals with presumed or confirmed tuberculosis. Our search had no limitations on study type or language, although only reports in English, German, and French were screened for eligibility. For the meta-analysis, we included test accuracy studies that used any reference standard, and we assessed risk of bias using the Quality Assessment of Diagnostic Accuracy Studies-2 tool. The primary outcomes for the meta-analysis were sensitivity and specificity of targeted NGS to diagnose drug-resistant tuberculosis compared to phenotypic and genotypic drug susceptibility testing. We used a Bayesian bivariate model to generate summary receiver operating characteristic plots and diagnostic accuracy measures, overall and stratified by drug and sample type. This study is registered with PROSPERO, CRD42022368707.

FINDINGS

We identified and screened 2920 reports, of which 124 were eligible for our systematic review, including 37 review articles and 87 reports of studies collecting samples for targeted NGS. Sequencing was mainly done in the USA (14 [16%] of 87), western Europe (ten [11%]), India (ten [11%]), and China (nine [10%]). We included 24 test accuracy studies in the meta-analysis, in which 23 different tuberculosis drugs or drug groups were assessed, covering first-line drugs, injectable drugs, and fluoroquinolones and predominantly comparing targeted NGS with phenotypic drug susceptibility testing. The combined sensitivity of targeted NGS across all drugs was 94·1% (95% credible interval [CrI] 90·9-96·3) and specificity was 98·1% (97·0-98·9). Sensitivity for individual drugs ranged from 76·5% (52·5-92·3) for capreomycin to 99·1% (98·3-99·7) for rifampicin; specificity ranged from 93·1% (88·0-96·3) for ethambutol to 99·4% (98·3-99·8) for amikacin. Diagnostic accuracy was similar for primary clinical samples and culture isolates overall and for rifampicin, isoniazid, ethambutol, streptomycin, and fluoroquinolones, and similar after excluding studies at high risk of bias (overall sensitivity 95·2% [95% CrI 91·7-97·1] and specificity 98·6% [97·4-99·3]).

INTERPRETATION

Targeted NGS is highly sensitive and specific for detecting drug resistance across panels of tuberculosis drugs and can be performed directly on clinical samples. There is a paucity of data on performance for some currently recommended drugs. The barriers preventing the use of targeted NGS to diagnose drug-resistant tuberculosis in high-burden countries need to be addressed.

FUNDING

National Institutes of Allergy and Infectious Diseases and Swiss National Science Foundation.

Evaluation of targeted sequencing for pathogen identification in bone and joint infections: a cohort study from China

PURPOSE

Bone and joint tuberculosis (BJTB) is a distinct variant of tuberculosis in which clinical diagnosis often leads to relative misdiagnosis and missed diagnoses. This study aimed to evaluate the diagnostic accuracy of the targeted nanopore sequencing (TNPseq) assay for BJTB patients in China.

METHOD

The study enrolled a cohort of 163 patients with suspected BJTB. Diagnostic testing was performed using the TNPseq assay on samples including punctured tissue, pus, and blood. The diagnostic accuracy of the TNPseq assay was then compared with that of the T-SPOT and Xpert MTB/RIF assays.

RESULT

TNPseq exhibited superior performance in terms of accuracy, demonstrating a sensitivity of 76.3% (95% CI: 71.0-81.6%) and a specificity of 98.8% (95% CI: 93.5-100%) in clinical diagnosis. When evaluated against a composite reference standard, TNPseq demonstrated a sensitivity of 74.4% (95% CI: 69.3-79.5%) and a specificity of 98.8% (95% CI: 93.7-100%). These results exceed the performance of both the T-SPOT and Xpert MTB/RIF tests. Notably, TNPseq demonstrated high specificity and accuracy in puncture specimens, with a sensitivity of 75.0% (95% CI: 70.2-79.8%) and a specificity of 98.3% (95% CI: 92.7-100%), as well as in pus samples, with a sensitivity of 83.3% (95% CI: 78.6-88.1%) and a specificity of 100% (95% CI: 100-100%). Additionally, TNPseq facilitated the detection of mixed infection scenarios, identifying 20 cases of bacterial-fungal co-infection, 17 cases of bacterial-viral co-infection, and two cases of simultaneous bacterial-fungal-viral co-infection.

CONCLUSION

TNPseq demonstrated great potential in the diagnosis of BJTB due to its high sensitivity and specificity. The ability of TNPseq to diagnose pathogens and detect drug resistance genes can also guide subsequent treatment. Expanding the application scenarios and scope of TNPseq will enable it to benefit more clinical treatments.

Nanopore-based targeted next-generation sequencing of tissue samples for tuberculosis diagnosis

Objective

Diagnosing tuberculosis (TB) can be particularly challenging in the absence of sputum for pulmonary tuberculosis cases and extrapulmonary TB (EPTB). This study evaluated the utility of nanopore-based targeted next-generation sequencing (tNGS) for diagnosing TB in tissue samples, and compared its efficacy with other established diagnostic methods.

Methods

A total of 110 tissue samples from clinical cases were examined. The sensitivity and specificity of tNGS were benchmarked against a range of existing diagnostic approaches including hematoxylin and eosin (HE) staining in conjunction with acid-fast bacilli (AFB) detection, HE staining combined with PCR, HE staining paired with immunohistochemistry (IHC) using anti-MPT64, and the Xpert Mycobacterium tuberculosis (MTB)/rifampicin (RIF) assay.

Results

The sensitivity and specificity of tNGS were 88.2 and 94.1%, respectively. The respective sensitivities for HE staining combined with AFB, HE staining combined with PCR, HE staining combined with IHC using anti-MPT64, and Xpert MTB/RIF were 30.1, 49.5, 47.3, and 59.1%. The specificities for these methods were 82.4, 88.2, 94.1, and 94.1%, respectively. Analysis of drug resistance based on tNGS results indicated that 10 of 93 TB patients (10.75%) had potential drug resistance.

Conclusion

Targeted next-generation sequencing achieved higher accuracy than other established diagnostic methods, and can play a crucial role in the rapid and accurate diagnosis of TB, including drug-resistant TB.

Bacterial enrichment prior to third-generation metagenomic sequencing improves detection of BRD pathogens and genetic determinants of antimicrobial resistance in feedlot cattle

Introduction

Bovine respiratory disease (BRD) is one of the most important animal health problems in the beef industry. While bacterial culture and antimicrobial susceptibility testing have been used for diagnostic testing, the common practice of examining one isolate per species does not fully reflect the bacterial population in the sample. In contrast, a recent study with metagenomic sequencing of nasal swabs from feedlot cattle is promising in terms of bacterial pathogen identification and detection of antimicrobial resistance genes (ARGs). However, the sensitivity of metagenomic sequencing was impeded by the high proportion of host biomass in the nasal swab samples.

Methods

This pilot study employed a non-selective bacterial enrichment step before nucleic acid extraction to increase the relative proportion of bacterial DNA for sequencing.

Results

Non-selective bacterial enrichment increased the proportion of bacteria relative to host sequence data, allowing increased detection of BRD pathogens compared with unenriched samples. This process also allowed for enhanced detection of ARGs with species-level resolution, including detection of ARGs for bacterial species of interest that were not targeted for culture and susceptibility testing. The long-read sequencing approach enabled ARG detection on individual bacterial reads without the need for assembly. Metagenomics following non-selective bacterial enrichment resulted in substantial agreement for four of six comparisons with culture for respiratory bacteria and substantial or better correlation with qPCR. Comparison between isolate susceptibility results and detection of ARGs was best for macrolide ARGs in Mannheimia haemolytica reads but was also substantial for sulfonamide ARGs within M. haemolytica and Pasteurella multocida reads and tetracycline ARGs in Histophilus somni reads.

Discussion

By increasing the proportion of bacterial DNA relative to host DNA through non-selective enrichment, we demonstrated a corresponding increase in the proportion of sequencing data identifying BRD-associated pathogens and ARGs in deep nasopharyngeal swabs from feedlot cattle using long-read metagenomic sequencing. This method shows promise as a detection strategy for BRD pathogens and ARGs and strikes a balance between processing time, input costs, and generation of on-target data. This approach could serve as a valuable tool to inform antimicrobial management for BRD and support antimicrobial stewardship.

Laboratory tools for the direct detection of bacterial respiratory infections and antimicrobial resistance: a scoping review

Rapid laboratory tests are urgently required to inform antimicrobial use in food animals. Our objective was to synthesize knowledge on the direct application of long-read metagenomic sequencing to respiratory samples to detect bacterial pathogens and antimicrobial resistance genes (ARGs) compared to PCR, loop-mediated isothermal amplification, and recombinase polymerase amplification. Our scoping review protocol followed the Joanna Briggs Institute and PRISMA Scoping Review reporting guidelines. Included studies reported on the direct application of these methods to respiratory samples from animals or humans to detect bacterial pathogens ±ARGs and included turnaround time (TAT) and analytical sensitivity. We excluded studies not reporting these or that were focused exclusively on bioinformatics. We identified 5,636 unique articles from 5 databases. Two-reviewer screening excluded 3,964, 788, and 784 articles at 3 levels, leaving 100 articles (19 animal and 81 human), of which only 7 studied long-read sequencing (only 1 in animals). Thirty-two studies investigated ARGs (only one in animals). Reported TATs ranged from minutes to 2 d; steps did not always include sample collection to results, and analytical sensitivity varied by study. Our review reveals a knowledge gap in research for the direct detection of bacterial respiratory pathogens and ARGs in animals using long-read metagenomic sequencing. There is an opportunity to harness the rapid development in this space to detect multiple pathogens and ARGs on a single sequencing run. Long-read metagenomic sequencing tools show potential to address the urgent need for research into rapid tests to support antimicrobial stewardship in food animal production.

Air monitoring by nanopore sequencing

While the air microbiome and its diversity are essential for human health and ecosystem resilience, comprehensive air microbial diversity monitoring has remained rare, so that little is known about the air microbiome's composition, distribution, or functionality. Here we show that nanopore sequencing-based metagenomics can robustly assess the air microbiome in combination with active air sampling through liquid impingement and tailored computational analysis. We provide fast and portable laboratory and computational approaches for air microbiome profiling, which we leverage to robustly assess the taxonomic composition of the core air microbiome of a controlled greenhouse environment and of a natural outdoor environment. We show that long-read sequencing can resolve species-level annotations and specific ecosystem functions through de novo metagenomic assemblies despite the low amount of fragmented DNA used as an input for nanopore sequencing. We then apply our pipeline to assess the diversity and variability of an urban air microbiome, using Barcelona, Spain, as an example; this randomized experiment gives first insights into the presence of highly stable location-specific air microbiomes within the city's boundaries, and showcases the robust microbial assessments that can be achieved through automatable, fast, and portable nanopore sequencing technology.

Real-time genomics for One Health

The ongoing degradation of natural systems and other environmental changes has put our society at a crossroad with respect to our future relationship with our planet. While the concept of One Health describes how human health is inextricably linked with environmental health, many of these complex interdependencies are still not well-understood. Here, we describe how the advent of real-time genomic analyses can benefit One Health and how it can enable timely, in-depth ecosystem health assessments. We introduce nanopore sequencing as the only disruptive technology that currently allows for real-time genomic analyses and that is already being used worldwide to improve the accessibility and versatility of genomic sequencing. We showcase real-time genomic studies on zoonotic disease, food security, environmental microbiome, emerging pathogens, and their antimicrobial resistances, and on environmental health itself - from genomic resource creation for wildlife conservation to the monitoring of biodiversity, invasive species, and wildlife trafficking. We stress why equitable access to real-time genomics in the context of One Health will be paramount and discuss related practical, legal, and ethical limitations.

Development and Assessment of a Novel Whole-Gene-Based Targeted Next-Generation Sequencing Assay for Detecting the Susceptibility of Mycobacterium tuberculosis to 14 Drugs

Targeted next-generation sequencing (tNGS) has emerged as an alternative method for detecting drug-resistant tuberculosis (DR-TB). To provide comprehensive drug susceptibility information and to address mutations missed by available commercial molecular diagnostics, we developed and evaluated a tNGS panel with 22 whole-gene targets using the Ion Torrent platform to predict drug resistance to 14 drugs, namely, rifampicin (RIF), isoniazid (INH), ethambutol (EMB), pyrazinamide (PZA), moxifloxacin (MFX), levofloxacin (LFX), amikacin (AMK), capreomycin (CM), kanamycin (KM), streptomycin (SM), bedaquiline (BDQ), clofazimine (CFZ), linezolid (LZD), and delamanid (DLM). We selected 50 and 35 Mycobacterium tuberculosis isolates with various DR profiles as the training set and the challenge set, respectively. Comparative variant analyses of the DR genes were performed using Sanger sequencing and whole-genome sequencing (WGS). Phenotypic drug susceptibility testing (pDST) results were used as gold standards. Regarding the limit of detection, the tNGS assay detected 2.9 to 3.8% minority variants in 4% mutant mixtures. The sensitivity and specificity of tNGS were 97.0% (95% confidence interval [CI] = 93.1 to 98.7%) and 99.1% (95% CI = 97.7 to 99.7%), respectively. The concordance of tNGS with pDST was 98.5% (95% CI = 97.2 to 99.2%), which was comparable to that of WGS (98.7%, 95% CI = 97.4 to 99.3%) and better than that of Sanger sequencing (96.9%, 95% CI = 95.3 to 98.0%). The agreement between tNGS and pDST was almost perfect for RIF, INH, EMB, MFX, LFX, AMK, CM, KM, SM, BDQ, and LZD (kappa value = 0.807 to 1.000) and substantial for PZA (kappa value = 0.791). Our customized novel whole-gene-based tNGS panel is highly consistent with pDST and WGS for comprehensive and accurate prediction of drug resistance in a strengthened and streamlined DR-TB laboratory program. IMPORTANCE We developed and validated a tNGS assay that was the first to target 22 whole genes instead of regions of drug resistance genes and comprehensively detected susceptibility to 14 anti-TB drugs, with great flexibility to include new or repurposed drugs. Notably, we demonstrated that our custom-designed Ion AmpliSeq TB research panel platform had high concordance with pDST and could significantly reduce turnaround time (by approximately 70%) to meet a clinically actionable time frame. Our tNGS assay is a promising DST solution for providing needed clinical information for precision medicine-guided therapies for DR-TB and allows the rollout of active pharmacovigilance.

High Throughput Sequencing for Clinical Tuberculosis: An Overview

High throughput sequencing (HTS) can identify the presence of Mycobacterium tuberculosis DNA in a clinical sample while also providing information on drug susceptibility. Multiple studies have provided a context for exploring the clinical application of HTS for TB diagnosis. The workflow challenges, strengths and limitations of the various sequencing platforms, and tools used for analysis are presented to provide a framework for further innovations in the field.

Differential Impact of the rpoB Mutant on Rifampin and Rifabutin Resistance Signatures of Mycobacterium tuberculosis Is Revealed Using a Whole-Genome Sequencing Assay

Drug resistance in Mycobacterium tuberculosis (MTB) has long been a serious health issue worldwide. Most drug-resistant MTB isolates were identified due to treatment failure or in clinical examinations 3~6 months postinfection. In this study, we propose a whole-genome sequencing (WGS) pipeline via the Nanopore MinION platform to facilitate the efficacy of phenotypic identification of clinical isolates. We used the Nanopore MinION platform to perform WGS of clinical MTB isolates, including susceptible (n = 30) and rifampin- (RIF) or rifabutin (RFB)-resistant isolates (n = 20) according to results of a susceptibility test. Nonsynonymous variants within the rpoB gene associated with RIF resistance were identified using the WGS analytical pipeline. In total, 131 variants within the rpoB gene in RIF-resistant isolates were identified. The presence of the emergent Asp531Gly or His445Gln was first identified to be associated with the rifampin and rifabutin resistance signatures of clinical isolates. The results of the minimum inhibitory concentration (MIC) test further indicated that the Ser450Leu or the mutant within the rifampin resistance-determining region (RRDR)-associated rifabutin-resistant signature was diminished in the presence of novel mutants, including Phe669Val, Leu206Ile, or Met148Leu, identified in this study.

IMPORTANCE Current approaches to diagnose drug-resistant MTB are time-consuming, consequently leading to inefficient intervention or further disease transmission. In this study, we curated lists of coding variants associated with differential rifampin and rifabutin resistant signatures using a single molecule real-time (SMRT) sequencing platform with a shorter hands-on time. Accordingly, the emerging WGS pipeline constitutes a potential platform for efficacious and accurate diagnosis of drug-resistant MTB isolates.

Portable sequencing of Mycobacterium tuberculosis for clinical and epidemiological applications

With >1 million associated deaths in 2020, human tuberculosis (TB) caused by the bacteria Mycobacterium tuberculosis remains one of the deadliest infectious diseases. A plethora of genomic tools and bioinformatics pipelines have become available in recent years to assist the whole genome sequencing of M. tuberculosis. The Oxford Nanopore Technologies (ONT) portable sequencer is a promising platform for cost-effective application in clinics, including personalizing treatment through detection of drug resistance-associated mutations, or in the field, to assist epidemiological and transmission investigations. In this study, we performed a comparison of 10 clinical isolates with DNA sequenced on both long-read ONT and (gold standard) short-read Illumina HiSeq platforms. Our analysis demonstrates the robustness of the ONT variant calling for single nucleotide polymorphisms, despite the high error rate. Moreover, because of improved coverage in repetitive regions where short sequencing reads fail to align accurately, ONT data analysis can incorporate additional regions of the genome usually excluded (e.g. pe/ppe genes). The resulting extra resolution can improve the characterization of transmission clusters and dynamics based on inferring closely related isolates. High concordance in variants in loci associated with drug resistance supports its use for the rapid detection of resistant mutations. Overall, ONT sequencing is a promising tool for TB genomic investigations, particularly to inform clinical and surveillance decision-making to reduce the disease burden.

Nanopore Sequencing for Mycobacterium tuberculosis: a Critical Review of the Literature, New Developments, and Future Opportunities

The next-generation, short-read sequencing technologies that generate comprehensive, whole-genome data with single nucleotide resolution have already advanced tuberculosis diagnosis, treatment, surveillance, and source investigation. Their high costs, tedious and lengthy processes, and large equipment remain major hurdles for research use in high tuberculosis burden countries and implementation into routine care. The portable next-generation sequencing devices developed by Oxford Nanopore Technologies (ONT) are attractive alternatives due to their long-read sequence capability, compact low-cost hardware, and continued improvements in accuracy and throughput. A systematic review of the published literature demonstrated limited uptake of ONT sequencing in tuberculosis research and clinical care. Of the 12 eligible articles presenting ONT sequencing data on at least one Mycobacterium tuberculosis sample, four addressed software development for long-read ONT sequencing data with potential applications for M. tuberculosis. Only eight studies presented results of ONT sequencing of M. tuberculosis, of which five performed whole-genome and three did targeted sequencing. Based on these findings, we summarize the standard processes, reflect on the current limitations of ONT sequencing technology, and the research needed to overcome the main hurdles. The low capital cost, portable nature and continued improvement in the performance of ONT sequencing make it an attractive option for sequencing for research and clinical care, but limited data are available on its application in the tuberculosis field. Important research investment is needed to unleash the full potential of ONT sequencing for tuberculosis research and care.

Whole-Genome Sequencing of Pathogenic Bacteria-New Insights into Antibiotic Resistance Spreading

In recent years, the acquisition of antimicrobial resistance (AMR) by both pathogenic and opportunistic bacteria has become a major problem worldwide, which was already noticed as a global healthcare threat by the World Health Organization [...].

Integrative utility of long read sequencing-based whole genome analysis and phenotypic assay on differentiating isoniazid-resistant signature of Mycobacterium tuberculosis

Background

With the advancement of next generation sequencing technologies (NGS), whole-genome sequencing (WGS) has been deployed to a wide range of clinical scenarios. Rapid and accurate classification of drug-resistant Mycobacterium tuberculosis (MTB) would be advantageous in reducing the amplification of additional drug resistance and disease transmission.

Methods

In this study, a long-read sequencing approach was subjected to the whole-genome sequencing of clinical MTB clones with susceptibility test profiles, including isoniazid (INH) susceptible clones (n = 10) and INH resistant clones (n = 42) isolated from clinical specimens. Non-synonymous variants within the katG or inhA gene associated with INH resistance was identified using Nanopore sequencing coupled with a corresponding analytical workflow.

Results

In total, 54 nucleotide variants within the katG gene and 39 variants within the inhA gene associated with INH resistance were identified. Consistency among the results of genotypic profiles, susceptibility test, and minimal inhibitory concentration, the high-INH resistance signature was estimated using the area under the receiver operating characteristic curve with the existence of Ser315Thr (AUC = 0.822) or Thr579Asn (AUC = 0.875).

Conclusions

Taken together, we curated lists of coding variants associated with differential INH resistance using Nanopore sequencing, which may constitute an emerging platform for rapid and accurate identification of drug-resistant MTB clones.

Accuracy of an amplicon-sequencing nanopore approach to identify variants in tuberculosis drug-resistance-associated genes

A rapid and accurate diagnostic assay represents an important means to detect Mycobacterium tuberculosis, identify drug-resistant strains and ensure treatment success. Currently employed techniques to diagnose drug-resistant tuberculosis include slow phenotypic tests or more rapid molecular assays that evaluate a limited range of drugs. Whole-genome-sequencing-based approaches can detect known drug-resistance-conferring mutations and novel variations; however, the dependence on growing samples in culture, and the associated delays in achieving results, represents a significant limitation. As an alternative, targeted sequencing strategies can be directly performed on clinical samples at high throughput. This study proposes a targeted sequencing assay to rapidly detect drug-resistant strains of M. tuberculosis using the Nanopore MinION sequencing platform. We designed a single-tube assay that targets nine genes associated with drug resistance to seven drugs and two phylogenetic-determining regions to determine strain lineage and tested it in nine clinical isolates and six sputa. The study's main aim is to calibrate MinNION variant calling to detect drug-resistance-associated mutations with different frequencies to match the accuracy of Illumina (the current gold-standard sequencing technology) from both culture and sputum samples. After calibrating Nanopore MinION variant calling, we demonstrated 100% agreement between Illumina WGS and our MinION set up to detect known drug resistance and phylogenetic variants in our dataset. Importantly, other variants in the amplicons are also detected, decreasing the recall. We identify minority variants and insertions/deletions as crucial bioinformatics challenges to fully reproduce Illumina WGS results.

Real-time next-generation sequencing on shell-vial culture to contribute to diagnosis of lymphatic tuberculosis: a case report

Lymph node tuberculosis is a of limited clinical suspicion form of Mycobacterium tuberculosis infection. After 15 days incubation in a cellular culture and directly from the supernatant, 11 minutes of Oxford Nanopore MinION sequencing provided a preliminary result of an antibiotic-susceptible M. tuberculosis Indo-Oceanic lineage strain. Oxford Nanopore MinION sequencing is a promising tool for optimising the laboratory diagnosis of lymph node tuberculosis.