The function of TONNEAU1 in moss reveals ancient mechanisms of division plane specification and cell elongation in land plants

An ABCB transporter regulates anisotropic cell expansion via cuticle deposition in the moss Physcomitrium patens

Anisotropic cell expansion is crucial for the morphogenesis of land plants, as cell migration is restricted by the rigid cell wall. The anisotropy of cell expansion is regulated by mechanisms acting on the deposition or modification of cell wall polysaccharides. Besides the polysaccharide components in the cell wall, a layer of hydrophobic cuticle covers the outer cell wall and is subjected to tensile stress that mechanically restricts cell expansion. However, the molecular machinery that deposits cuticle materials in the appropriate spatiotemporal manner to accommodate cell and tissue expansion remains elusive. Here, we report that PpABCB14, an ATP-binding cassette transporter in the moss Physcomitrium patens, regulates the anisotropy of cell expansion. PpABCB14 localized to expanding regions of leaf cells. Deletion of PpABCB14 resulted in impaired anisotropic cell expansion. Unexpectedly, the cuticle proper was reduced in the mutants, and the cuticular lipid components decreased. Moreover, induced PpABCB14 expression resulted in deformed leaf cells with increased cuticle lipid accumulation on the cell surface. Taken together, PpABCB14 regulates the anisotropy of cell expansion via cuticle deposition, revealing a regulatory mechanism for cell expansion in addition to the mechanisms acting on cell wall polysaccharides.

Redundant mechanisms in division plane positioning

Redundancies in plant cell division contribute to the maintenance of proper division plane orientation. Here we highlight three types of redundancy: 1) Temporal redundancy, or correction of earlier defects that results in proper final positioning, 2) Genetic redundancy, or functional compensation by homologous genes, and 3) Synthetic redundancy, or redundancy within or between pathways that contribute to proper division plane orientation. Understanding the types of redundant mechanisms involved provides insight into current models of division plane orientation and opens up new avenues for exploration.

BrCWM Mutation Disrupted Leaf Flattening in Chinese Cabbage (Brassica rapa L. ssp. pekinensis)

Leaf flattening plays a vital role in the establishment of plant architecture, which is closely related to plant photosynthesis and, thus, influences the product yield and quality of Chinese cabbage. In this study, we used the doubled haploid line ‘FT’ of Chinese cabbage as the wild type for ethyl methanesulfonate (EMS) mutagenesis and obtained a mutant cwm with stably inherited compact and wrinkled leaves. Genetic analysis revealed that the mutated trait was controlled by a single recessive nuclear gene, Brcwm. Brcwm was preliminarily mapped to chromosome A07 based on bulked segregant RNA sequencing (BSR-seq) and fine-mapped to a 205.66 kb region containing 39 genes between Indel12 and Indel21 using SSR and Indel analysis. According to the whole-genome re-sequencing results, we found that there was only one nonsynonymous single nucleotide polymorphism (SNP) (C to T) within the target interval on exon 4 of BraA07g021970.3C, which resulted in a proline to serine amino acid substitution. The mutated trait co-segregated with the SNP. Quantitative reverse transcriptase polymerase chain reaction (qRT-PCR) revealed that BraA07g021970.3C expression was dramatically higher in ‘FT’ leaves than that in cwm leaves. BraA07g021970.3C is homologous to AT3G55000 encoding a protein related to cortical microtubule organization. A similar phenotype of dwarfism and wrinkled leaves was observed in the recessive homozygous mutant cwm-f1 of AT3G55000, and its T3 transgenic lines were restored to the Arabidopsis wild-type phenotype through ectopic overexpression of BraA07g021970.3C. These results verified that BraA07g021970.3C was the target gene essential for leaf flattening in Chinese cabbage.

Microfluidic Device for High-Resolution Cytoskeleton Imaging and Washout Assays in Physcomitrium (Physcomitrella) patens

Visualizing cytoskeleton dynamics at high spatiotemporal resolution provides valuable insights into the way the dynamics change as well as its interactions with multiple proteins in order to maintain cellular function. Oblique illumination fluorescent microscopy is a popular technique to image cellular events localized near the plasma membrane. In this chapter, we provide detailed protocols for high-resolution cytoskeleton imaging using protonema and gametophore cells of the moss Physcomitrella (Physcomitrium patens) in the microfluidic device. These include preparation of the polydimethylsiloxane (PDMS) device, culture of moss cells, and both short- and long-term oblique illumination fluorescent microscopy. We also describe how to introduce to, and wash out from, the device chemical compounds, such as microtubule-disrupting drugs, during live-cell imaging.

The baseless mutant links protein phosphatase 2A with basal cell identity in the brown alga Ectocarpus

The first mitotic division of the initial cell is a key event in all multicellular organisms and is associated with the establishment of major developmental axes and cell fates. The brown alga Ectocarpus has a haploid-diploid life cycle that involves the development of two multicellular generations: the sporophyte and the gametophyte. Each generation deploys a distinct developmental programme autonomously from an initial cell, the first cell division of which sets up the future body pattern. Here, we show that mutations in the BASELESS (BAS) gene result in multiple cellular defects during the first cell division and subsequent failure to produce basal structures during both generations. BAS encodes a type B″ regulatory subunit of protein phosphatase 2A (PP2A), and transcriptomic analysis identified potential effector genes that may be involved in determining basal cell fate. The bas mutant phenotype is very similar to that observed in distag (dis) mutants, which lack a functional Tubulin-binding co-factor Cd1 (TBCCd1) protein, indicating that TBCCd1 and PP2A are two essential components of the cellular machinery that regulates the first cell division and mediates basal cell fate determination.

Unravelling 3D growth in the moss Physcomitrium patens

The colonization of land by plants, and the greening of the terrestrial biosphere, was one of the most important events in the history of life on Earth. The transition of plants from water to land was accompanied, and largely facilitated, by the acquisition of apical cells with three or more cutting faces (3D growth). This enabled plants to develop the morphological characteristics required to survive and reproduce effectively on land and to colonize progressively drier habitats. Most plants develop in such a way that makes genetic studies of 3D growth difficult as the onset of 3D growth is established early during embryo development. On the other hand, in the moss Physcomitrium patens, the onset of 3D growth is preceded by a protracted 2D filamentous phase of the life cycle that can be continuously propagated. P. patens is an ideal model system in which to identify the genetic toolkit underpinning the 2D to 3D growth transition, and this is because 3D growth is not a pre-requisite for survival. Thus, insights into the mechanisms underpinning the formation of apical cells and the subsequent establishment and maintenance of 3D growth have largely been gained through studies in P. patens. This review summarizes the most recently published articles that have provided new and important insights into the mechanisms underpinning 3D growth in P. patens.

Tools for studying the cytoskeleton during plant cell division

The plant cytoskeleton regulates fundamental biological processes, including cell division. How to experimentally perturb the cytoskeleton is a key question if one wants to understand the role of both actin filaments (AFs) and microtubules (MTs) in a given biological process. While a myriad of mutants are available, knock-out in cytoskeleton regulators, when nonlethal, often produce little or no phenotypic perturbation because such regulators are often part of a large family, leading to functional redundancy. In this review, alternative techniques to modify the plant cytoskeleton during plant cell division are outlined. The different pharmacological and genetic approaches already developed in cell culture, transient assays, or in whole organisms are presented. Perspectives on the use of optogenetics to perturb the plant cytoskeleton are also discussed.

Division site determination during asymmetric cell division in plants

During development, both animals and plants exploit asymmetric cell division (ACD) to increase tissue complexity, a process that usually generates cells dissimilar in size, morphology, and fate. Plants lack the key regulators that control ACD in animals. Instead, plants have evolved two unique cytoskeletal structures to tackle this problem: the preprophase band (PPB) and phragmoplast. The assembly of the PPB and phragmoplast and their contributions to division plane orientation have been extensively studied. However, how the division plane is positioned off the cell center during asymmetric division is poorly understood. Over the past 20 years, emerging evidence points to a critical role for polarly localized membrane proteins in this process. Although many of these proteins are species- or cell type specific, and the molecular mechanism underlying division asymmetry is not fully understood, common features such as morphological changes in cells, cytoskeletal dynamics, and nuclear positioning have been observed. In this review, we provide updates on polarity establishment and nuclear positioning during ACD in plants. Together with previous findings about symmetrically dividing cells and the emerging roles of developmental cues, we aim to offer evolutionary insight into a common framework for asymmetric division-site determination and highlight directions for future work.

The bryophytes Physcomitrium patens and Marchantia polymorpha as model systems for studying evolutionary cell and developmental biology in plants

Bryophytes are nonvascular spore-forming plants. Unlike in flowering plants, the gametophyte (haploid) generation of bryophytes dominates the sporophyte (diploid) generation. A comparison of bryophytes with flowering plants allows us to answer some fundamental questions raised in evolutionary cell and developmental biology. The moss Physcomitrium patens was the first bryophyte with a sequenced genome. Many cell and developmental studies have been conducted in this species using gene targeting by homologous recombination. The liverwort Marchantia polymorpha has recently emerged as an excellent model system with low genomic redundancy in most of its regulatory pathways. With the development of molecular genetic tools such as efficient genome editing, both P. patens and M. polymorpha have provided many valuable insights. Here, we review these advances with a special focus on polarity formation at the cell and tissue levels. We examine current knowledge regarding the cellular mechanisms of polarized cell elongation and cell division, including symmetric and asymmetric cell division. We also examine the role of polar auxin transport in mosses and liverworts. Finally, we discuss the future of evolutionary cell and developmental biological studies in plants.

Leaf Morphogenesis: Insights From the Moss Physcomitrium patens

Specialized photosynthetic organs have appeared several times independently during the evolution of land plants. Phyllids, the leaf-like organs of bryophytes such as mosses or leafy liverworts, display a simple morphology, with a small number of cells and cell types and lack typical vascular tissue which contrasts greatly with flowering plants. Despite this, the leaf structures of these two plant types share many morphological characteristics. In this review, we summarize the current understanding of leaf morphogenesis in the model moss Physcomitrium patens, focusing on the underlying cellular patterns and molecular regulatory mechanisms. We discuss this knowledge in an evolutionary context and identify parallels between moss and flowering plant leaf development. Finally, we propose potential research directions that may help to answer fundamental questions in plant development using moss leaves as a model system.

SEC6 exocyst subunit contributes to multiple steps of growth and development of Physcomitrella (Physcomitrium patens)

Spatially directed cell division and expansion is important for plant growth and morphogenesis and relies on cooperation between the cytoskeleton and the secretory pathway. The phylogenetically conserved octameric complex exocyst mediates exocytotic vesicle tethering at the plasma membrane. Unlike other exocyst subunits of land plants, the core exocyst subunit SEC6 exists as a single paralog in Physcomitrium patens and Arabidopsis thaliana genomes. Arabidopsis SEC6 (AtSEC6) loss-of-function (LOF) mutation causes male gametophytic lethality. Our attempts to inactivate the P. patens SEC6 gene, PpSEC6, using targeted gene replacement produced two independent partial LOF ('weak allele') mutants via perturbation of the PpSEC6 gene locus. These mutants exhibited the same pleiotropic developmental defects: protonema with dominant chloronema stage; diminished caulonemal filament elongation rate; and failure in post-initiation gametophore development. Mutant gametophore buds, mostly initiated from chloronema cells, exhibited disordered cell file organization and cross-wall perforations, resulting in arrested development at the eight- to 10-cell stage. Complementation of both sec6 moss mutant lines by both PpSEC6 and AtSEC6 cDNA rescued gametophore development, including sexual organ differentiation. However, regular sporophyte formation and viable spore production were recovered only by the expression of PpSEC6, whereas the AtSEC6 complementants were only rarely fertile, indicating moss-specific SEC6 functions.

TANGLED1 mediates microtubule interactions that may promote division plane positioning in maize

The microtubule cytoskeleton serves as a dynamic structural framework for mitosis in eukaryotic cells. TANGLED1 (TAN1) is a microtubule-binding protein that localizes to the division site and mitotic microtubules and plays a critical role in division plane orientation in plants. Here, in vitro experiments demonstrate that TAN1 directly binds microtubules, mediating microtubule zippering or end-on microtubule interactions, depending on their contact angle. Maize tan1 mutant cells improperly position the preprophase band (PPB), which predicts the future division site. However, cell shape–based modeling indicates that PPB positioning defects are likely a consequence of abnormal cell shapes and not due to TAN1 absence. In telophase, colocalization of growing microtubules ends from the phragmoplast with TAN1 at the division site suggests that TAN1 interacts with microtubule tips end-on. Together, our results suggest that TAN1 contributes to microtubule organization to ensure proper division plane orientation.

Physcomitrium patens: A Single Model to Study Oriented Cell Divisions in 1D to 3D Patterning

Development in multicellular organisms relies on cell proliferation and specialization. In plants, both these processes critically depend on the spatial organization of cells within a tissue. Owing to an absence of significant cellular migration, the relative position of plant cells is virtually made permanent at the moment of division. Therefore, in numerous plant developmental contexts, the (divergent) developmental trajectories of daughter cells are dependent on division plane positioning in the parental cell. Prior to and throughout division, specific cellular processes inform, establish and execute division plane control. For studying these facets of division plane control, the moss Physcomitrium (Physcomitrella) patens has emerged as a suitable model system. Developmental progression in this organism starts out simple and transitions towards a body plan with a three-dimensional structure. The transition is accompanied by a series of divisions where cell fate transitions and division plane positioning go hand in hand. These divisions are experimentally highly tractable and accessible. In this review, we will highlight recently uncovered mechanisms, including polarity protein complexes and cytoskeletal structures, and transcriptional regulators, that are required for 1D to 3D body plan formation.

Two ANGUSTIFOLIA genes regulate gametophore and sporophyte development in Physcomitrella patens

In Arabidopsis thaliana the ANGUSTIFOLIA (AN) gene regulates the width of leaves by controlling the diffuse growth of leaf cells in the medio-lateral direction. In the genome of the moss Physcomitrella patens, we found two normal ANs (PpAN1-1 and 1-2). Both PpAN1 genes complemented the A. thaliana an-1 mutant phenotypes. An analysis of spatiotemporal promoter activity of each PpAN1 gene, using transgenic lines that contained each PpAN1-promoter- uidA (GUS) gene, showed that both promoters are mainly active in the stems of haploid gametophores and in the middle to basal region of the young sporophyte that develops into the seta and foot. Analyses of the knockout lines for PpAN1-1 and PpAN1-2 genes suggested that these genes have partially redundant functions and regulate gametophore height by controlling diffuse cell growth in gametophore stems. In addition, the seta and foot were shorter and thicker in diploid sporophytes, suggesting that cell elongation was reduced in the longitudinal direction, whereas no defects were detected in tip-growing protonemata. These results indicate that both PpAN1 genes in P. patens function in diffuse growth of the haploid and diploid generations but not in tip growth. To visualize microtubule distribution in gametophore cells of P. patens, transformed lines expressing P. patens α-tubulin fused to sGFP were generated. Contrary to expectations, the orientation of microtubules in the tips of gametophores in the PpAN1-1/1-2 double-knockout lines was unchanged. The relationships among diffuse cell growth, cortical microtubules and AN proteins are discussed.

A versatile microfluidic device for highly inclined thin illumination microscopy in the moss Physcomitrella patens

High-resolution microscopy is a valuable tool for studying cellular processes, such as signalling, membrane trafficking, or cytoskeleton remodelling. Several techniques of inclined illumination microscopy allow imaging at a near single molecular level; however, the application of these methods to plant cells is limited, owing to thick cell walls as well as the necessity to excise a part of the tissue for sample preparation. In this study, we utilised a simple, easy-to-use microfluidic device for highly inclined and laminated optical sheet (HILO) microscopy using a model plant Physcomitrella patens. We demonstrated that the shallow microfluidic device can be used for long-term culture of living cells and enables high-resolution HILO imaging of microtubules without perturbing their dynamics. In addition, our microdevice allows the supply and robust washout of compounds during HILO microscopy imaging, for example, to perform a microtubule regrowth assay. Furthermore, we tested long-term (48 h) HILO imaging using a microdevice and visualised the developmental changes in the microtubule dynamics during tissue regeneration. These novel applications of the microfluidic device provide a valuable resource for studying molecular dynamics in living plant cells.

Genetic Regulation of the 2D to 3D Growth Transition in the Moss Physcomitrella patens

One of the most important events in the history of life on earth was the colonization of land by plants; this transition coincided with and was most likely enabled by the evolution of 3-dimensional (3D) growth. Today, the diverse morphologies exhibited across the terrestrial biosphere arise from the differential regulation of 3D growth processes during development. In many plants, 3D growth is initiated during the first few divisions of the zygote, and therefore, the genetic basis cannot be dissected because mutants do not survive. However, in mosses, which are representatives of the earliest land plants, 3D shoot growth is preceded by a 2D filamentous phase that can be maintained indefinitely. Here, we used the moss Physcomitrella patens to identify genetic regulators of the 2D to 3D transition. Mutant screens yielded individuals that could only grow in 2D, and through an innovative strategy that combined somatic hybridization with bulk segregant analysis and genome sequencing, the causative mutation was identified in one of them. The NO GAMETOPHORES 1 (NOG1) gene, which encodes a ubiquitin-associated protein, is present only in land plant genomes. In mutants that lack PpNOG1 function, transcripts encoding 3D-promoting PpAPB transcription factors [1] are significantly reduced, and apical initial cells specified for 3D growth are not formed. PpNOG1 acts at the earliest identified stage of the 2D to 3D transition, possibly through degradation of proteins that suppress 3D growth. The acquisition of NOG1 function in land plants could thus have enabled the evolution and development of 3D morphology.

•

NO GAMETOPHORES 1 (PpNOG1) regulates the 2D to 3D growth transition in P. patens

•

PpNOG1 acts upstream of 3D-promoting PpAPB transcription factors

•

PpNOG1 is required for the formation of apical initial cells specified for 3D growth

•

NOG1 genes are found only in land plants and thus evolved coincident with 3D growth

Division Plane Establishment and Cytokinesis

Plant cells divide their cytoplasmic content by forming a new membrane compartment, the cell plate, via a rerouting of the secretory pathway toward the division plane aided by a dynamic cytoskeletal apparatus known as the phragmoplast. The phragmoplast expands centrifugally and directs the cell plate to the preselected division site at the plasma membrane to fuse with the parental wall. The division site is transiently decorated by the cytoskeletal preprophase band in preprophase and prophase, whereas a number of proteins discovered over the last decade reside continuously at the division site and provide a lasting spatial reference for phragmoplast guidance. Recent studies of membrane fusion at the cell plate have revealed the contribution of functionally conserved eukaryotic proteins to distinct stages of cell plate biogenesis and emphasize the coupling of cell plate formation with phragmoplast expansion. Together with novel findings concerning preprophase band function and the setup of the division site, cytokinesis and its spatial control remain an open-ended field with outstanding and challenging questions to resolve.

Plant cell division - defining and finding the sweet spot for cell plate insertion

The plant microtubules form unique arrays using acentrosomal microtubule nucleation pathways, yet utilizing evolutionary conserved centrosomal proteins. In cytokinesis, a multi-component cytoskeletal apparatus, the phragmoplast mediates the biosynthesis of the new cell plate by dynamic centrifugal expansion, a process that demands exquisite coordination of microtubule turnover and endomembrane trafficking. At the same time, the phragmoplast is guided to meet with the parental wall at a cortical site that is predefined before mitotic entry and transiently marked by the preprophase band of microtubules. The cortical division zone maintains positional information of the selected division plane for the entire duration of cell division and for the guidance of the phragmoplast during cytokinesis. Its establishment is an essential requirement for normal plant organogenesis, due to the confinement of cells by rigid cell walls.

A centriolar FGR1 oncogene partner-like protein required for paraflagellar rod assembly, but not axoneme assembly in African trypanosomes

Proteins of the FGR1 oncogene partner (or FOP) family are found at microtubule organizing centres (MTOCs) including, in flagellate eukaryotes, the centriole or flagellar basal body from which the axoneme extends. We report conservation of FOP family proteins, TbFOPL and TbOFD1, in the evolutionarily divergent sleeping sickness parasite Trypanosoma brucei, showing (in contrast with mammalian cells, where FOP is essential for flagellum assembly) depletion of a trypanosome FOP homologue, TbFOPL, affects neither axoneme nor flagellum elongation. Instead, TbFOPL depletion causes catastrophic failure in assembly of a lineage-specific, extra-axonemal structure, the paraflagellar rod (PFR). That depletion of centriolar TbFOPL causes failure in PFR assembly is surprising because PFR nucleation commences approximately 2 µm distal from the basal body. When over-expressed with a C-terminal myc-epitope, TbFOPL was also observed at mitotic spindle poles. Little is known about bi-polar spindle assembly during closed trypanosome mitosis, but indication of a possible additional MTOC function for TbFOPL parallels MTOC localization of FOP-like protein TONNEAU1 in acentriolar plants. More generally, our functional analysis of TbFOPL emphasizes significant differences in evolutionary cell biology trajectories of FOP-family proteins. We discuss how at the molecular level FOP homologues may contribute to flagellum assembly and function in diverse flagellates.

Exocyst subunit Sec6 is positioned by microtubule overlaps in the moss phragmoplast prior to cell plate membrane arrival

During plant cytokinesis a radially expanding membrane-enclosed cell plate is formed from fusing vesicles that compartmentalizes the cell in two. How fusion is spatially restricted to the site of cell plate formation is unknown. Aggregation of cell-plate membrane starts near regions of microtubule overlap within the bipolar phragmoplast apparatus of the moss Physcomitrella patens Since vesicle fusion generally requires coordination of vesicle tethering and subsequent fusion activity, we analyzed the subcellular localization of several subunits of the exocyst, a tethering complex active during plant cytokinesis. We found that the exocyst complex subunit Sec6 but not the Sec3 or Sec5 subunits localized to microtubule overlap regions in advance of cell plate construction in moss. Moreover, Sec6 exhibited a conserved physical interaction with an ortholog of the Sec1/Munc18 protein KEULE, an important regulator for cell-plate membrane vesicle fusion in Arabidopsis Recruitment of the P. patens protein KEULE and vesicles to the early cell plate was delayed upon Sec6 gene silencing. Our findings, thus, suggest that vesicle-vesicle fusion is, in part, enabled by a pool of exocyst subunits at microtubule overlaps, which is recruited independently of vesicle delivery.

Cell geometry determines symmetric and asymmetric division plane selection in Arabidopsis early embryos

Plant tissue architecture and organ morphogenesis rely on the proper orientation of cell divisions. Previous attempts to predict division planes from cell geometry in plants mostly focused on 2D symmetric divisions. Using the stereotyped division patterns of Arabidopsis thaliana early embryogenesis, we investigated geometrical principles underlying plane selection in symmetric and in asymmetric divisions within complex 3D cell shapes. Introducing a 3D computational model of cell division, we show that area minimization constrained on passing through the cell centroid predicts observed divisions. Our results suggest that the positioning of division planes ensues from cell geometry and gives rise to spatially organized cell types with stereotyped shapes, thus underlining the role of self-organization in the developing architecture of the embryo. Our data further suggested the rule could be interpreted as surface minimization constrained by the nucleus position, which was validated using live imaging of cell divisions in the stomatal cell lineage.

The proper positioning of division planes is key for correct development and morphogenesis of organs, in particular in plants were cellular walls prevent cell rearrangements. Elucidating how division planes are selected is therefore essential to decipher the cellular bases of plant morphogenesis. Previous attempts to identify geometrical rules relating cell shape and division plane positioning in plants mostly focused on symmetric divisions in tissues reduced to 2D geometries. Here, we combined 3D quantitative image analysis and a new 3D cell division model to evaluate the existence of geometrical rules in asymmetrical and symmetrical divisions of complex cell shapes. We show that in the early embryo of the model plant Arabidopsis thaliana, which presents stereotyped but complex cell division patterns, a single geometrical rule (area minimization constrained on passing through the cell centroid) recapitulates the complete sequence of division events. This new rule, valid for both symmetrical and asymmetrical divisions, generalizes previously proposed cell division rules and can be interpreted based on the dynamics of the cytoskeleton and on the positioning of the nucleus, a hypothesis that we validated using leaf cell division patterns. This work highlights the importance of self-organization in plant early morphogenesis and the emergence of robust cellular organizations based on geometrical feedback loops between cell geometry and division plane selection.

The 2D to 3D growth transition in the moss Physcomitrella patens

The colonization of land by plants coincided with and was most likely facilitated by the evolution of 3-dimensional (3D) growth. 3D growth is a pivotal feature of all land plants, but most develop in a way that precludes genetic investigation. In the moss Physcomitrella patens, 3D growth (gametophores) is preceded by an extended 2-dimensional (2D) growth phase (protonemata) that can be propagated indefinitely. Studies using P. patens have thus elucidated some of the molecular mechanisms underlying 3D growth regulation. This review summarizes the known molecular mechanisms underlying both the formation of gametophore initial cells and the development of the 3D growth in gametophores.

Plant Organ Shapes Are Regulated by Protein Interactions and Associations With Microtubules

Plant organ shape is determined by the spatial-temporal expression of genes that control the direction and rate of cell division and expansion, as well as the mechanical constraints provided by the rigid cell walls and surrounding cells. Despite the importance of organ morphology during the plant life cycle, the interplay of patterning genes with these mechanical constraints and the cytoskeleton is poorly understood. Shapes of harvestable plant organs such as fruits, leaves, seeds and tubers vary dramatically among, and within crop plants. Years of selection have led to the accumulation of mutations in genes regulating organ shapes, allowing us to identify new genetic and molecular components controlling morphology as well as the interactions among the proteins. Using tomato as a model, we discuss the interaction of Ovate Family Proteins (OFPs) with a subset of TONNEAU1-recruiting motif family of proteins (TRMs) as a part of the protein network that appears to be required for interactions with the microtubules leading to coordinated multicellular growth in plants. In addition, SUN and other members of the IQD family also exert their effects on organ shape by interacting with microtubules. In this review, we aim to illuminate the probable mechanistic aspects of organ growth mediated by OFP-TRM and SUN/IQD via their interactions with the cytoskeleton.

Chiral events in developing gametophores of Physcomitrella patens and other moss species are driven by an unknown, universal direction-sensing mechanism

PREMISE OF THE STUDY

We used the model species Physcomitrella patens to examine chirality in moss gametophores. Chirality is manifested in the direction of consecutive apical cell divisions, cell plate configurations, and deviations of leaf connecting lines from the vertical course. However, the frequencies of chiral configurations of all these processes as well as their mutual dependence-especially in the case of gametophore branching-are not known. Other moss species were checked to determine the universality of our findings.

METHODS

The gametophore structure of Physcomitrella patens grown in the laboratory under controlled conditions was investigated using light microscopy and compared with that of other moss species collected from their natural stands.

KEY RESULTS

In all investigated moss species, the tetrahedral apical cell exhibits either clockwise or counterclockwise consecutive divisions, and selection of this directionality in the primary axis is random. It is, however, related to cell plate configuration. If the plate is skewed, leaf-producing segments arising from the apical cell cleavage exhibit circumferential rotation. Three parallel lines connecting the leaves deviate from a vertical course, but always in the same direction as that of leaf initiation; thus, the angular distance between consecutive leaves increases to >120°. Lateral branches are exclusively antidromous.

CONCLUSIONS

Gametophore chiral configuration appears to be useful in resolving problems of moss modular growth and branching. Morphological and anatomical evidence strongly suggests that an unknown direction-sensing mechanism controls the development of moss axial organs. We propose that leaves are responsible for a horizontal gradient of sugar signals that develops along the gametophore circumference, thus influencing branching-unit chirality.

An overview of plant division-plane orientation

Contents Summary 505 I. Introduction 505 II. Models of plant cell division 505 III. Establishing the division plane 506 IV. Maintaining the division plane during mitosis and cytokinesis 509 Acknowledgements 510 References 510 SUMMARY: Plants, a significant source of planet-wide biomass, have an unique type of cell division in which a new cell wall is constructed de novo inside the cell and guided towards the cell edge to complete division. The elegant control over positioning this new cell wall is essential for proper patterning and development. Plant cells, lacking migration, tightly coordinate division orientation and directed expansion to generate organized shapes. Several emerging lines of evidence suggest that the proteins required for division-plane establishment are distinct from those required for division-plane maintenance. We discuss recent shape-based computational models and mutant analyses that raise questions about, and identify unexpected connections between, the roles of well-known proteins and structures during division-plane orientation.

The preprophase band of microtubules controls the robustness of division orientation in plants

Controlling cell division plane orientation is essential for morphogenesis in multicellular organisms. In plant cells, the future cortical division plane is marked before mitotic entry by the preprophase band (PPB). Here, we characterized an Arabidopsis trm (TON1 Recruiting Motif) mutant that impairs PPB formation but does not affect interphase microtubules. Unexpectedly, PPB disruption neither abolished the capacity of root cells to define a cortical division zone nor induced aberrant cell division patterns but rather caused a loss of precision in cell division orientation. Our results advocate for a reassessment of PPB function and division plane determination in plants and show that a main output of this microtubule array is to limit spindle rotations in order to increase the robustness of cell division.

Cytoplasmic MTOCs control spindle orientation for asymmetric cell division in plants

Proper orientation of the cell division axis is critical for asymmetric cell divisions that underpin cell differentiation. In animals, centrosomes are the dominant microtubule organizing centers (MTOC) and play a pivotal role in axis determination by orienting the mitotic spindle. In land plants that lack centrosomes, a critical role of a microtubular ring structure, the preprophase band (PPB), has been observed in this process; the PPB is required for orienting (before prophase) and guiding (in telophase) the mitotic apparatus. However, plants must possess additional mechanisms to control the division axis, as certain cell types or mutants do not form PPBs. Here, using live imaging of the gametophore of the moss Physcomitrella patens, we identified acentrosomal MTOCs, which we termed "gametosomes," appearing de novo and transiently in the prophase cytoplasm independent of PPB formation. We show that gametosomes are dispensable for spindle formation but required for metaphase spindle orientation. In some cells, gametosomes appeared reminiscent of the bipolar MT "polar cap" structure that forms transiently around the prophase nucleus in angiosperms. Specific disruption of the polar caps in tobacco cells misoriented the metaphase spindles and frequently altered the final division plane, indicating that they are functionally analogous to the gametosomes. These results suggest a broad use of transient MTOC structures as the spindle orientation machinery in plants, compensating for the evolutionary loss of centrosomes, to secure the initial orientation of the spindle in a spatial window that allows subsequent fine-tuning of the division plane axis by the guidance machinery.

Variation in Basal Body Localisation and Targeting of Trypanosome RP2 and FOR20 Proteins

TOF-LisH-PLL motifs define FOP family proteins; some members are involved in flagellum assembly. The critical role of FOP family protein FOR20 is poorly understood. Here, we report relative localisations of the four FOP family proteins in parasitic Trypanosoma brucei: TbRP2, TbOFD1 and TbFOP/FOP1-like are mature basal body proteins whereas TbFOR20 is present on pro- and mature basal bodies - on the latter it localises distal to TbRP2. We discuss how the data, together with published work for another protist Giardia intestinalis, informs on likely FOR20 function. Moreover, our localisation study provides convincing evidence that the antigen recognised by monoclonal antibody YL1/2 at trypanosome mature basal bodies is FOP family protein TbRP2, not tyrosinated α-tubulin as widely stated in the literature. Curiously, FOR20 proteins from T. brucei and closely related African trypanosomes possess short, negatively-charged N-terminal extensions absent from FOR20 in other trypanosomatids and other eukaryotes. The extension is necessary for protein targeting, but insufficient to re-direct TbRP2 to probasal bodies. Yet, FOR20 from the American trypanosome T. cruzi, which lacks any extension, localises to pro- and mature basal bodies when expressed in T. brucei. This identifies unexpected variation in FOR20 architecture that is presently unique to one clade of trypanosomatids.

An intragenic mutagenesis strategy in Physcomitrella patens to preserve intron splicing

Gene targeting is a powerful reverse genetics technique for site-specific genome modification. Intrinsic homologous recombination in the moss Physcomitrella patens permits highly effective gene targeting, a characteristic that makes this organism a valuable model for functional genetics. Functional characterization of domains located within a multi-domain protein depends on the ability to generate mutants harboring genetic modifications at internal gene positions while maintaining the reading-frames of the flanking exons. In this study, we designed and evaluated different gene targeting constructs for targeted gene manipulation of sequences corresponding to internal domains of the DEFECTIVE KERNEL1 protein in Physcomitrella patens. Our results show that gene targeting-associated mutagenesis of introns can have adverse effects on splicing, corrupting the normal reading frame of the transcript. We show that successful genetic modification of internal sequences of multi-exon genes depends on gene-targeting strategies which insert the selection marker cassette into the 5' end of the intron and preserve the nucleotide sequence of the targeted intron.

Proper division plane orientation and mitotic progression together allow normal growth of maize

How growth, microtubule dynamics, and cell-cycle progression are coordinated is one of the unsolved mysteries of cell biology. A maize mutant, tangled1, with known defects in growth and proper division plane orientation, and a recently characterized cell-cycle delay identified by time-lapse imaging, was used to clarify the relationship between growth, cell cycle, and proper division plane orientation. The tangled1 mutant was fully rescued by introduction of cortical division site localized TANGLED1-YFP. A CYCLIN1B destruction box was fused to TANGLED1-YFP to generate a line that mostly rescued the division plane defect but still showed cell-cycle delays when expressed in the tangled1 mutant. Although an intermediate growth phenotype between wild-type and the tangled1 mutant was expected, these partially rescued plants grew as well as wild-type siblings, indicating that mitotic progression delays alone do not alter overall growth. These data indicate that division plane orientation, together with proper cell-cycle progression, is critical for plant growth.

Efficient and Heritable Targeted Mutagenesis in Mosses Using the CRISPR/Cas9 System

Targeted genome modification by RNA-guided nucleases derived from the clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated nuclease 9 (Cas9) system has seen rapid development in many organisms, including several plant species. In the present study, we succeeded in introducing the CRISPR/Cas9 system into the non-model organism Scopelophila cataractae, a moss that exhibits heavy metal tolerance, and the model organism Physcomitrella patens Utilizing the process by which moss plants regenerate from protoplasts, we conducted targeted mutagenesis by expression of single-chain guide RNA (sgRNA) and Cas9 in protoplasts. Using this method, the acquisition rate of strains exhibiting phenotypic changes associated with the target genes was approximately 45-69%, and strains with phenotypic changes exhibited various insertion and deletion mutations. In addition, we report that our method is capable of multiplex targeted mutagenesis (two independent genes) and also permits the efficient introduction of large deletions (∼3 kbp). These results demonstrate that the CRISPR/Cas9 system can be used to accelerate investigations of bryology and land plant evolution.

Microtubule dynamics of the centrosome-like polar organizers from the basal land plant Marchantia polymorpha

The liverwort Marchantia employs both modern and ancestral devices during cell division: it forms preprophase bands and in addition it shows centrosome-like polar organizers. We investigated whether polar organizers and preprophase bands cooperate to set up the division plane. To this end, two novel green fluorescent protein-based microtubule markers for dividing cells of Marchantia were developed. Cells of the apical notch formed polar organizers first and subsequently assembled preprophase bands. Polar organizers were formed de novo from multiple mobile microtubule foci localizing to the nuclear envelope. The foci then became concentrated by bipolar aggregation. We determined the comet production rate of polar organizers and show that microtubule plus ends of astral microtubules polymerize faster than those found on cortical microtubules. Importantly, it was observed that conditions increasing polar organizer numbers interfere with preprophase band formation. The data show that polar organizers have much in common with centrosomes, but that they also have specialized features. The results suggest that polar organizers contribute to preprophase band formation and in this way are involved in controlling the division plane. Our analyses of the basal land plant Marchantia shed new light on the evolution of plant cell division.

Using Live-Cell Markers in Maize to Analyze Cell Division Orientation and Timing

Recently developed live-cell markers provide an opportunity to explore the dynamics and localization of proteins in maize, an important crop and model for monocot development. A step-by-step method is outlined for observing and analyzing the process of division in maize cells. The steps include plant growth conditions, sample preparation, time-lapse setup, and calculation of division rates.

Evolutionary developmental genetics of fruit morphological variation within the Solanaceae

Morphological variations of fruits such as shape and size, and color are a result of adaptive evolution. The evolution of morphological novelties is particularly intriguing. An understanding of these evolutionary processes calls for the elucidation of the developmental and genetic mechanisms that result in particular fruit morphological characteristics, which determine seed dispersal. The genetic and developmental basis for fruit morphological variation was established at a microevolutionary time scale. Here, we summarize the progress on the evolutionary developmental genetics of fruit size, shape and color in the Solanaceae. Studies suggest that the recruitment of a pre-existing gene and subsequent modification of its interaction and regulatory networks are frequently involved in the evolution of morphological diversity. The basic mechanisms underlying changes in plant morphology are alterations in gene expression and/or gene function. We also deliberate on the future direction in evolutionary developmental genetics of fruit morphological variation such as fruit type. These studies will provide insights into plant developmental processes and will help to improve the productivity and fruit quality of crops.

Preprophase band formation and cortical division zone establishment: RanGAP behaves differently from microtubules during their band formation

Correct positioning of the division plane is a prerequisite for plant morphogenesis. The preprophase band (PPB) is a key intracellular structure of division site determination. PPB forms in G2 phase as a broad band of microtubules (MTs) that narrows in prophase and specializes few-micrometer-wide cortical belt region, named the cortical division zone (CDZ), in late prophase. The PPB comprises several molecules, some of which act as MT band organization and others remain in the CDZ marking the correct insertion of the cell plate in telophase. Ran GTPase-activating protein (RanGAP) is accumulated in the CDZ and forms a RanGAP band in prophase. However, little is known about when and how RanGAPs gather in the CDZ, and especially with regard to their relationships to MT band formation. Here, we examined the spatial and temporal distribution of RanGAPs and MTs in the preprophase of onion root tip cells using confocal laser scanning microscopy and showed that the RanGAP band appeared in mid-prophase as the width of MT band was reduced to nearly 7 µm. Treatments with cytoskeletal inhibitors for 15 min caused thinning or broadening of the MT band but had little effects on RanGAP band in mid-prophase and most of late prophase cells. Detailed image analyses of the spatial distribution of RanGAP band and MT band showed that the RanGAP band positioned slightly beneath the MT band in mid-prophase. These results raise a possibility that RanGAP behaves differently from MTs during their band formation.

The cortical cytoskeletal network and cell-wall dynamics in the unicellular charophycean green alga Penium margaritaceum

BACKGROUND AND AIMS

Penium margaritaceum is a unicellular charophycean green alga with a unique bi-directional polar expansion mechanism that occurs at the central isthmus zone prior to cell division. This entails the focused deposition of cell-wall polymers coordinated by the activities of components of the endomembrane system and cytoskeletal networks. The goal of this study was to elucidate the structural organization of the cortical cytoskeletal network during the cell cycle and identify its specific functional roles during key cell-wall developmental events: pre-division expansion and cell division.

METHODS

Microtubules and actin filaments were labelled during various cell cycle phases with an anti-tubulin antibody and rhodamine phalloidin, respectively. Chemically induced disruption of the cytoskeleton was used to elucidate specific functional roles of microtubules and actin during cell expansion and division. Correlation of cytoskeletal dynamics with cell-wall development included live cell labelling with wall polymer-specific antibodies and electron microscopy.

KEY RESULTS

The cortical cytoplasm of Penium is highlighted by a band of microtubules found at the cell isthmus, i.e. the site of pre-division wall expansion. This band, along with an associated, transient band of actin filaments, probably acts to direct the deposition of new wall material and to mark the plane of the future cell division. Two additional bands of microtubules, which we identify as satellite bands, arise from the isthmus microtubular band at the onset of expansion and displace toward the poles during expansion, ultimately marking the isthmus of future daughter cells. Treatment with microtubule and actin perturbation agents reversibly stops cell division.

CONCLUSIONS

The cortical cytoplasm of Penium contains distinct bands of microtubules and actin filaments that persist through the cell cycle. One of these bands, termed the isthmus microtubule band, or IMB, marks the site of both pre-division wall expansion and the zone where a cross wall will form during cytokinesis. This suggests that prior to the evolution of land plants, a dynamic, cortical cytoskeletal array similar to a pre-prophase band had evolved in the charophytes. However, an interesting variation on the cortical band theme is present in Penium, where two satellite microtubule bands are produced at the onset of cell expansion, each of which is destined to become an IMB in the two daughter cells after cytokinesis. These unique cytoskeletal components demonstrate the close temporal control and highly coordinated cytoskeletal dynamics of cellular development in Penium.

Eight types of stem cells in the life cycle of the moss Physcomitrella patens

Stem cells self-renew and produce cells that differentiate to become the source of the plant body. The moss Physcomitrella patens forms eight types of stem cells during its life cycle and serves as a useful model in which to explore the evolution of such cells. The common ancestor of land plants is inferred to have been haplontic and to have formed stem cells only in the gametophyte generation. A single stem cell would have been maintained in the ancestral gametophyte meristem, as occurs in extant basal land plants. During land plant evolution, stem cells diverged in the gametophyte generation to form different types of body parts, including the protonema and rhizoid filaments, leafy-shoot and thalloid gametophores, and gametangia formed in moss. A simplex meristem with a single stem cell was acquired in the sporophyte generation early in land plant evolution. Subsequently, sporophyte stem cells became multiple in the meristem and were elaborated further in seed plant lineages, although the evolutionary origin of niche cells, which maintain stem cells is unknown. Comparisons of gene regulatory networks are expected to give insights into the general mechanisms of stem cell formation and maintenance in land plants and provide information about their evolution. P. patens develops at least seven types of simplex meristem in the gametophyte and at least one type in the sporophyte generation and is a good material for regulatory network comparisons. In this review, we summarize recently revealed molecular mechanisms of stem cell initiation and maintenance in the moss.

MAPs: cellular navigators for microtubule array orientations in Arabidopsis

Microtubules are subcellular nanotubes composed of α- and β-tubulin that arise from microtubule nucleation sites, mainly composed of γ-tubulin complexes [corrected]. Cell wall encased plant cells have evolved four distinct microtubule arrays that regulate cell division and expansion. Microtubule-associated proteins, the so called MAPs, construct, destruct and reorganize microtubule arrays thus regulating their spatiotemporal transitions during the cell cycle. By physically binding to microtubules and/or modulating their functions, MAPs control microtubule dynamic instability and/or interfilament cross talk. We survey the recent analyses of Arabidopsis MAPs such as MAP65, MOR1, CLASP, katanin, TON1, FASS, TRM, TAN1 and kinesins in terms of their effects on microtubule array organizations and plant development.

What lies beyond the eye: the molecular mechanisms regulating tomato fruit weight and shape

Domestication of fruit and vegetables resulted in a huge diversity of shapes and sizes of the produce. Selections that took place over thousands of years of alleles that increased fruit weight and altered shape for specific culinary uses provide a wealth of resources to study the molecular bases of this diversity. Tomato (Solanum lycopersicum) evolved from a wild ancestor (S. pimpinellifolium) bearing small and round edible fruit. Molecular genetic studies led to the identification of two genes selected for fruit weight: FW2.2 encoding a member of the Cell Number Regulator family; and FW3.2 encoding a P450 enzyme and the ortholog of KLUH. Four genes were identified that were selected for fruit shape: SUN encoding a member of the IQD family of calmodulin-binding proteins leading to fruit elongation; OVATE encoding a member of the OVATE family proteins involved in transcriptional repression leading to fruit elongation; LC encoding most likely the ortholog of WUSCHEL controlling meristem size and locule number; FAS encoding a member in the YABBY family controlling locule number leading to flat or oxheart shape. For this article, we will provide an overview of the putative function of the known genes, when during floral and fruit development they are hypothesized to act and their potential importance in regulating morphological diversity in other fruit and vegetable crops.

The mechanics behind cell division

It is now well established that the orientation of the plane of cell division highly depends on cell geometry in plants. However, the related molecular mechanism remains largely unknown. Recent data in animal systems highlight the role of the cytoskeleton response to mechanical stress in this process. Interestingly, these results are consistent with some data obtained in parallel in plants. Here we review and confront these studies, across kingdoms, and we explore the possibility that the intrinsic mechanical properties of the cytoskeleton play a key role in the nexus between cell division and mechanical stress. This opens many avenues for future research that are also discussed in this review.

The evolution and diversification of plant microtubule-associated proteins

Plant evolution is marked by major advances in structural characteristics that facilitated the highly successful colonization of dry land. Underlying these advances is the evolution of genes encoding specialized proteins that form novel microtubular arrays of the cytoskeleton. This review investigates the evolution of plant families of microtubule-associated proteins (MAPs) through the recently sequenced genomes of Arabidopsis thaliana, Oryza sativa, Selaginella moellendorffii, Physcomitrella patens, Volvox carteri and Chlamydomonas reinhardtii. The families of MAPs examined are AIR9, CLASP, CRIPT, MAP18, MOR1, TON, EB1, AtMAP70, SPR2, SPR1, WVD2 and MAP65 families (abbreviations are defined in the footnote to Table 1). Conjectures are made regarding the evolution of MAPs in plants in relation to the evolution of multicellularity, oriented cell division and vasculature. Angiosperms in particular have high numbers of proteins that are involved in promotion of helical growth or its suppression, and novel plant microtubular structures may have acted as a catalyst for the development of novel plant MAPs. Comparisons of plant MAP gene families with those of animals show that animals may have more flexibility in the structure of their microtubule cytoskeletons than plants, but with both plants and animals possessing many MAP splice variants.

The role of the cytoskeleton and associated proteins in determination of the plant cell division plane

In plants, as in all eukaryotic organisms, microtubule- and actin-filament based structures play fundamental roles during cell division. In addition to the mitotic spindle, plant cells have evolved a unique cytoskeletal structure that designates a specific division plane before the onset of mitosis via formation of a cortical band of microtubules and actin filaments called the preprophase band. During cytokinesis, a second plant-specific microtubule and actin filament structure called the phragmoplast directs vesicles to create the new cell wall. In response to intrinsic and extrinsic cues, many plant cells form a preprophase band in G2 , then the preprophase band recruits specific proteins to populate the cortical division site prior to disassembly of the preprophase band in prometaphase. These proteins are thought to act as a spatial reminder that actively guides the phragmoplast towards the cortical division site during cytokinesis. A number of proteins involved in determination and maintenance of the plane of cell division have been identified. Our current understanding of the molecular interactions of these proteins and their regulation of microtubules is incomplete, but advanced imaging techniques and computer simulations have validated some early concepts of division site determination.

Usefulness of Physcomitrella patens for studying plant organogenesis

In this chapter, we review the main organogenesis features and associated regulation processes of the moss Physcomitrella patens (P. patens), the model plant for the Bryophytes. We highlight how the study of this descendant of the earliest plant species that colonized earth, brings useful keys to understand the mechanisms that determine and control both vascular and non vascular plants organogenesis. Despite its simple morphogenesis pattern, P. patens still requires the fine tuning of organogenesis regulators, including hormone signalling, common to the whole plant kingdom, and which study is facilitated by a high number of molecular tools, among which the powerful possibility of gene targeting/replacement. The recent discovery of moss cells reprogramming capacity completes the picture of an excellent model for studying plant organogenesis.

Universal rules for division plane selection in plants

Coordinated cell divisions and cell expansion are the key processes that command growth in all organisms. The orientation of cell divisions and the direction of cell expansion are critical for normal development. Symmetric divisions contribute to proliferation and growth, while asymmetric divisions initiate pattern formation and differentiation. In plants these processes are of particular importance since their cells are encased in cellulosic walls that determine their shape and lock their position within tissues and organs. Several recent studies have analyzed the relationship between cell shape and patterns of symmetric cell division in diverse organisms and employed biophysical and mathematical considerations to develop computer simulations that have allowed accurate prediction of cell division patterns. From these studies, a picture emerges that diverse biological systems follow simple universal rules of geometry to select their division planes and that the microtubule cytoskeleton takes a major part in sensing the geometric information and translates this information into a specific division outcome. In plant cells, the division plane is selected before mitosis, and spatial information of the division plane is preserved throughout division by the presence of reference molecules at a distinct region of the plasma membrane, the cortical division zone. The recruitment of these division zone markers occurs multiple times by several mechanisms, suggesting that the cortical division zone is a highly dynamic region.

Characterization of a PDK1 homologue from the moss Physcomitrella patens

The serine/threonine protein kinase 3-phosphoinositide-dependent protein kinase 1 (PDK1) is a highly conserved eukaryotic kinase that is a central regulator of many AGC kinase subfamily members. Through its regulation of AGC kinases, PDK1 controls many basic cellular processes, from translation to cell survival. While many of these PDK1-regulated processes are conserved across kingdoms, it is not well understood how PDK1 may have evolved within kingdoms. In order to better understand PDK1 evolution within plants, we have isolated and characterized the PDK1 gene from the moss Physcomitrella patens (PpPDK1), a nonvascular representative of early land plants. PpPDK1 is similar to other plant PDK1s in that it can functionally complement a yeast PDK1 knockout line. However, unlike PDK1 from other plants, the P. patens PDK1 protein does not bind phospholipids due to a lack of the lipid-binding pleckstrin homology domain, which is used for lipid-mediated regulation of PDK1 activity. Sequence analysis of several PDK1 proteins suggests that lipid regulation of PDK1 may not commonly occur in algae and nonvascular land plants. PpPDK1 can phosphorylate AGC kinase substrates from tomato (Solanum lycopersicum) and P. patens at the predicted PDK1 phosphorylation site, indicating that the PpPDK1 substrate phosphorylation site is conserved with higher plants. We have also identified residues within the PpPDK1 kinase domain that affect kinase activity and show that a mutant with highly reduced kinase activity can still confer cell viability in both yeast and P. patens. These studies lay the foundation for further analysis of the evolution of PDK1 within plants.

The Arabidopsis TRM1-TON1 interaction reveals a recruitment network common to plant cortical microtubule arrays and eukaryotic centrosomes

Land plant cells assemble microtubule arrays without a conspicuous microtubule organizing center like a centrosome. In Arabidopsis thaliana, the TONNEAU1 (TON1) proteins, which share similarity with FOP, a human centrosomal protein, are essential for microtubule organization at the cortex. We have identified a novel superfamily of 34 proteins conserved in land plants, the TON1 Recruiting Motif (TRM) proteins, which share six short conserved motifs, including a TON1-interacting motif present in all TRMs. An archetypal member of this family, TRM1, is a microtubule-associated protein that localizes to cortical microtubules and binds microtubules in vitro. Not all TRM proteins can bind microtubules, suggesting a diversity of functions for this family. In addition, we show that TRM1 interacts in vivo with TON1 and is able to target TON1 to cortical microtubules via its C-terminal TON1 interaction motif. Interestingly, three motifs of TRMs are found in CAP350, a human centrosomal protein interacting with FOP, and the C-terminal M2 motif of CAP350 is responsible for FOP recruitment at the centrosome. Moreover, we found that TON1 can interact with the human CAP350 M2 motif in yeast. Taken together, our results suggest conservation of eukaryotic centrosomal components in plant cells.

Arabidopsis α Aurora kinases function in formative cell division plane orientation

To establish three-dimensional structures/organs, plant cells continuously have to adapt the orientation of their division plane in a highly regulated manner. However, mechanisms underlying switches in division plane orientation remain elusive. Here, we characterize a viable double knockdown mutant in Arabidopsis thaliana group α Aurora (AUR) kinases, AUR1 and AUR2, (aur1-2 aur2-2), with a primary defect in lateral root formation and outgrowth. Mutant analysis revealed that aur1-2 aur2-2 lateral root primordia are built from randomly oriented cell divisions instead of distinct cell layers. This phenotype could be traced back to cytokinesis defects and misoriented cell plates during the initial anticlinal pericycle cell divisions that give rise to lateral root primordia. Complementation assays showed that the Arabidopsis α group Aurora kinases are functionally divergent from the single β group member AUR3 and that AUR1 functions in division plane orientation prior to cytokinesis. In addition to defective lateral root patterning, aur1-2 aur2-2 plants also show defects in orienting formative divisions during embryogenesis, divisions surrounding the main root stem cell niche, and divisions surrounding stomata formation. Taken together, our results put forward a central role for α Aurora kinases in regulating formative division plane orientation throughout development.

Physcomitrella cyclin-dependent kinase A links cell cycle reactivation to other cellular changes during reprogramming of leaf cells

During regeneration, differentiated plant cells can be reprogrammed to produce stem cells, a process that requires coordination of cell cycle reactivation with acquisition of other cellular characteristics. However, the factors that coordinate the two functions during reprogramming have not been determined. Here, we report a link between cell cycle reactivation and the acquisition of new cell-type characteristics through the activity of cyclin-dependent kinase A (CDKA) during reprogramming in the moss Physcomitrella patens. Excised gametophore leaf cells of P. patens are readily reprogrammed, initiate tip growth, and form chloronema apical cells with stem cell characteristics at their first cell division. We found that leaf cells facing the cut undergo CDK activation along with induction of a D-type cyclin, tip growth, and transcriptional activation of protonema-specific genes. A DNA synthesis inhibitor, aphidicolin, inhibited cell cycle progression but prevented neither tip growth nor protonemal gene expression, indicating that cell cycle progression is not required for acquisition of protonema cell-type characteristics. By contrast, treatment with a CDK inhibitor or induction of dominant-negative CDKA;1 protein inhibited not only cell cycle progression but also tip growth and protonemal gene expression. These findings indicate that cell cycle progression is coordinated with other cellular changes by the concomitant regulation through CDKA;1.