Fungal Growth in Batch Culture - What We Could Benefit If We Start Looking Closer

MetaFlowTrain: a highly parallelized and modular fluidic system for studying exometabolite-mediated inter-organismal interactions

Metabolic fluxes between cells, organisms, or communities drive ecosystem assembly and functioning and explain higher-level biological organization. Exometabolite-mediated inter-organismal interactions, however, remain poorly described due to technical challenges in measuring these interactions. Here, we present MetaFlowTrain, an easy-to-assemble, cheap, semi-high-throughput, and modular fluidic system in which multiple media can be flushed at adjustable flow rates into gnotobiotic microchambers accommodating diverse micro-organisms, ranging from bacteria to small eukaryotes. These microchambers can be used alone or connected in series to create microchamber trains within which metabolites, but not organisms, directionally travel between microchambers to modulate organismal growth. Using MetaFlowTrain, we uncover soil conditioning effects on synthetic community structure and plant growth, and reveal microbial antagonism mediated by exometabolite production. Our study highlights MetaFlowTrain as a versatile system for investigating plant-microbe-microbe metabolic interactions. We also discuss the system´s potential to discover metabolites that function as signaling molecules, drugs, or antimicrobials across various systems.

Sesquiterpenoid isolated from Colletotrichum truncatum derived from Gynura japonica: isolation, structure elucidation, and biological activity

The aim of this research was isolation, structure elucidation, and biological activities of terpenoids from endophytic fungus obtained from G. japonica. An endophytic fungus, Colletotrichum truncatum, was isolated from the roots of G. japonica. C. truncatum was cultivated and extracted to give the crude extract. The crude extract was fractionated using vacuum liquid chromatography followed by separation and purification with column chromatography to obtain a terpenoid derivative (12.8 mg). The compound was characterised for its structure using FT-IR and NMR spectra. Based on spectral analysis, the isolated compound was identified as sydonic acid. The isolated sydonic acid was active against three tested bacterial strains and also demonstrated antioxidant activity with an IC50 value of 76.5 ± 0.93 μg/mL. Interestingly, chemical research on the terpenoid derivative from the fungus C. truncatum associated with G. japonica is first reported herein.

Optimized psilocybin production in tryptophan catabolism-repressed fungi

The high therapeutic potential of psilocybin, a prodrug of the psychotropic psilocin, holds great promise for the treatment of mental disorders such as therapy-refractory depression, alcohol use disorder and anorexia nervosa. Psilocybin has been designated a 'Breakthrough Therapy' by the US Food and Drug Administration, and therefore a sustainable production process must be established to meet future market demands. Here, we present the development of an in vivo psilocybin production chassis based on repression of l-tryptophan catabolism. We demonstrate the proof of principle in Saccharomyces cerevisiae expressing the psilocybin biosynthetic genes. Deletion of the two aminotransferase genes ARO8/9 and the indoleamine 2,3-dioxygenase gene BNA2 yielded a fivefold increase of psilocybin titre. We transferred this knowledge to the filamentous fungus Aspergillus nidulans and identified functional ARO8/9 orthologs involved in fungal l-tryptophan catabolism by genome mining and cross-complementation. The double deletion mutant of A. nidulans resulted in a 10-fold increased psilocybin production. Process optimization based on respiratory activity measurements led to a final psilocybin titre of 267 mg/L in batch cultures with a space-time-yield of 3.7 mg/L/h. These results demonstrate the suitability of our engineered A. nidulans to serve as a production strain for psilocybin and other tryptamine-derived pharmaceuticals.

Integrative taxonomy of Metarhizium anisopliae species complex, based on phylogenomics combined with morphometrics, metabolomics, and virulence data

Metarhizium anisopliae (Clavicipitaceae, Hypocreales) is a globally distributed entomopathogenic fungus, which has been largely studied and used in agriculture for its potent entomopathogenicity. Since its taxonomic establishment as a member of Metarhizium, many closely related taxa have been described with highly similar morphology (cryptic species). A holotype specimen of M. anisopliae is not extant, and the ex-neotype strain (CBS 130.71) does not form a monophyletic clade with other strains, up to now, recognized as M. anisopliae sensu stricto. In this study, we have conducted an integrative taxonomic treatment of M. anisopliae sensu lato by including the ex-neotype strain of M. anisopliae, other unknown strains from our collections identified as M. anisopliae s. lat., as well as other known species that have been previously delimited as closely related but distinct to M. anisopliae. By including whole-genome sequencing, morphometric analysis, LC-MS based metabolomics, and virulence assays, we have demonstrated that M. anisopliae s. str. should also include M. lepidiotae (synonym), and that M. anisopliae s. str. differentiates from the other species of the complex by its metabolome and less severe entomopathogenicity. New taxa, namely M. hybridum, M. neoanisopliae and M. parapingshaense spp. nov., are proposed. The novel taxa proposed here have strong phylogenomics support, corroborated by fine-scale differences in the length/width of conidia/phialides, while the metabolomics and virulence data still largely overlap. We have also demonstrated via population genomics data the existence of local clonal lineages, particularly the one corresponding to the persistence of a biocontrol candidate strain that has been used in the field application for three years. This study showcases the utility of combining various data sources for accurate delimitation of species within an important group of fungal biocontrol agents against pest insects.

Quantifying massively parallel microbial growth with spatially mediated interactions

Quantitative understanding of microbial growth is an essential prerequisite for successful control of pathogens as well as various biotechnology applications. Even though the growth of cell populations has been extensively studied, microbial growth remains poorly characterised at the spatial level. Indeed, even isogenic populations growing at different locations on solid growth medium typically show significant location-dependent variability in growth. Here we show that this variability can be attributed to the initial physiological states of the populations, the interplay between populations interacting with their local environment and the diffusion of nutrients and energy sources coupling the environments. We further show how the causes of this variability change throughout the growth of a population. We use a dual approach, first applying machine learning regression models to discover that location dominates growth variability at specific times, and, in parallel, developing explicit population growth models to describe this spatial effect. In particular, treating nutrient and energy source concentration as a latent variable allows us to develop a mechanistic resource consumer model that captures growth variability across the shared environment. As a consequence, we are able to determine intrinsic growth parameters for each local population, removing confounders common to location-dependent variability in growth. Importantly, our explicit low-parametric model for the environment paves the way for massively parallel experimentation with configurable spatial niches for testing specific eco-evolutionary hypotheses.

Inferring fungal growth rates from optical density data

Quantifying fungal growth underpins our ability to effectively treat severe fungal infections. Current methods quantify fungal growth rates from time-course morphology-specific data, such as hyphal length data. However, automated large-scale collection of such data lies beyond the scope of most clinical microbiology laboratories. In this paper, we propose a mathematical model of fungal growth to estimate morphology-specific growth rates from easy-to-collect, but indirect, optical density (OD600) data of Aspergillus fumigatus growth (filamentous fungus). Our method accounts for OD600 being an indirect measure by explicitly including the relationship between the indirect OD600 measurements and the calibrating true fungal growth in the model. Therefore, the method does not require de novo generation of calibration data. Our model outperformed reference models at fitting to and predicting OD600 growth curves and overcame observed discrepancies between morphology-specific rates inferred from OD600 versus directly measured data in reference models that did not include calibration.

Endophytic fungus from Gynura japonica: phytochemical screening, biological activities, and characterisation of its bioactive compound

The research aims to identify the chemical constituents of endophytic fungi associated with Gynura japonica and their biological activities. Two endophytic fungi, labelled as GS-1 and GS-2, have been isolated from the leaves of G. japonica. They were cultivated on white rice media for their optimum cultivation time. Cultivated fungi were extracted with ethyl acetate and concentrated to give a crude extract. All crude extracts were evaluated for their phytochemical screening and assayed for their antibacterial and antioxidant activities. Based on the results, fungal GS-1 was the most potential fungus to produce bioactive secondary metabolites and identified as Dimorphiseta acuta. A bioactive compound was isolated from crude extract of fungal D. acuta and identified as emodin. To the best of our knowledge, the study of secondary metabolite and its biological activity of endophytic fungus colonised with the leaves of G. japonica is reported here for the first time.

"You Are What You Eat": How Fungal Adaptation Can Be Leveraged toward Myco-Material Properties

Fungi adapt to their surroundings, modifying their behaviors and composition under different conditions like nutrient availability and environmental stress. This perspective examines how a basic understanding of fungal genetics and the different ways that fungi can be influenced by their surroundings can be leveraged toward the production of functional mycelium materials. Simply put, within the constraints of a given genetic script, both the quality and quantity of fungal mycelium are shaped by what they eat and where they grow. These two levers, encompassing their global growth environment, can be turned toward different materials outcomes. The final properties of myco-materials are thus intimately shaped by the conditions of their growth, enabling the design of new biobased and biodegradable material constructions for applications that have traditionally relied on petroleum-based chemicals.This perspective highlights aspects of fungal genetics and environmental adaptation that have potential materials science implications, along the way touching on key studies, both to situate the state of the art within the field and to punctuate the viewpoints of the authors. Finally, this work ends with future perspectives, reinforcing key topics deemed important to consider in emerging myco-materials research.

A Rapid Method for Measuring In Vitro Growth in Entomopathogenic Fungi

Quantifying the growth of entomopathogenic fungi is crucial for understanding their virulence and pathogenic potential. Traditional methods for determining growth, such as biomass determination or colony growth area, are time-consuming and quantitatively and spatially limited in scope. In this study, we introduce a high-throughput method for rapidly measuring fungal growth using spectrophotometry in small-volume, liquid media cultures in 96-well microplates. Optical density (OD) changes were directly correlated with dry weight of samples for six isolates from three species of the genus Metarhizium to validate spectrophotometric growth measurements, and investigate species- and isolate-specific effects. We quantified fungal biomass from the microcultures by extracting, drying, and weighing mycelial mats. From the relationship established between OD and biomass, we generated standard curves for predicting biomass based on the OD values. The OD measurements clearly distinguished growth patterns among six isolates from three Metarhizium species. The logistic growth phase, as captured by the OD measurements, could be accurately assessed within a span of 80 h. Using isolates of M. acridum, M. brunneum, and M. guizhouense, this technique was demonstrated to be an effective, reproducible, and simple method for rapidly measuring filamentous fungal growth with high precision. This technique offers a valuable tool for studying the growth dynamics of entomopathogenic fungi and investigating the factors that influence their growth.

Mechanism of 5-chloro-2-methyl-4-isothiazolin-3-one (CMIT) in controlling microbial problems in aircraft fuel systems

This research investigated the potential use of 5-chloro-2-methyl-4-isothiazolin-3-one (CMIT) as a biocide in aircraft fuel systems, which is rarely studied due to the unique properties of such systems. The study assessed the effectiveness of CMIT against three microbial isolates using minimum inhibitory concentrations and bacteriostatic tests, and showed that CMIT had good activity against them. Electrochemical studies were conducted to determine the impact of CMIT on the 7B04 aluminum alloy, which demonstrated that CMIT acted as a cathodic inhibitor and exhibited certain levels of short-term and long-term corrosion inhibition effects at concentrations of 100 mg L^-1 and 60 mg L^-1, respectively. Additionally, the research provided insights into the mechanisms governing microbial problems by studying the reaction of CMIT with glutathione and sulfate. Overall, the study suggested that CMIT may be a useful biocide in aircraft fuel systems and provided important information on its efficacy and mechanism of action.

Time-Resolved Examination of Fungal Selenium Redox Transformations

Selenium (Se) is both a micronutrient required for most life and an element of environmental concern due to its toxicity at high concentrations, and both bioavailability and toxicity are largely influenced by the Se oxidation state. Environmentally relevant fungi have been shown to aerobically reduce Se(IV) and Se(VI), the generally more toxic and bioavailable Se forms. The goal of this study was to shed light on fungal Se(IV) reduction pathways and biotransformation products over time and fungal growth stages. Two Ascomycete fungi were grown with moderate (0.1 mM) and high (0.5 mM) Se(IV) concentrations in batch culture over 1 month. Fungal growth was measured throughout the experiments, and aqueous and biomass-associated Se was quantified and speciated using analytical geochemistry, transmission electron microscopy (TEM), and synchrotron-based X-ray absorption spectroscopy (XAS) approaches. The results show that Se transformation products were largely Se(0) nanoparticles, with a smaller proportion of volatile, methylated Se compounds and Se-containing amino acids. Interestingly, the relative proportions of these products were consistent throughout all fungal growth stages, and the products appeared stable over time even as growth and Se(IV) concentration declined. This time-series experiment showing different biotransformation products throughout the different growth phases suggests that multiple mechanisms are responsible for Se detoxification, but some of these mechanisms might be independent of Se presence and serve other cellular functions. Knowing and predicting fungal Se transformation products has important implications for environmental and biological health as well as for biotechnology applications such as bioremediation, nanobiosensors, and chemotherapeutic agents.

Solid-State Fermentation of Trichoderma spp.: A New Way to Valorize the Agricultural Digestate and Produce Value-Added Bioproducts

In this study, the agricultural digestate from anaerobic biogas production mixed with food wastes was used as a substrate to grow Trichoderma reesei RUT-C30 and Trichoderma atroviride Ta13 in solid-state fermentation (SSF) and produce high-value bioproducts, such as bioactive molecules to be used as ingredients for biostimulants. The Trichoderma spp. reached their maximum growth after 6 and 3 SSF days, respectively. Both Trichoderma species were able to produce cellulase, esterase, and citric and malic acids, while T. atroviride also produced gibberellins and oxylipins as shown by ultraperformance liquid chromatography with quadrupole time-of-flight mass spectrometry (UPLC-QTOF-MS) profiling. Experimental evaluation of germination parameters highlighted a significant promotion of tomato seed germination and root elongation induced by T. atroviride crude extracts from SSF. This study suggests an innovative sustainable use of the whole digestate mixed with agro-food waste as a valuable substrate in fungal biorefineries. Here, it has been applied to produce plant growth-promoting fungi and bioactive molecules for sustainable agriculture.

Species identity and combinations differ in their overall benefits to Astragalus adsurgens plants inoculated with single or multiple endophytic fungi under drought conditions

Although desert plants often establish multiple simultaneous symbiotic associations with various endophytic fungi in their roots, most studies focus on single fungus inoculation. Therefore, combined inoculation of multiple fungi should be applied to simulate natural habitats with the presence of a local microbiome. Here, a pot experiment was conducted to test the synergistic effects between three extremely arid habitat-adapted root endophytes (Alternaria chlamydospora, Sarocladium kiliense, and Monosporascus sp.). For that, we compared the effects of single fungus vs. combined fungi inoculation, on plant morphology and rhizospheric soil microhabitat of desert plant Astragalus adsurgens grown under drought and non-sterile soil conditions. The results indicated that fungal inoculation mainly influenced root biomass of A. adsurgens, but did not affect the shoot biomass. Both single fungus and combined inoculation decreased plant height (7-17%), but increased stem branching numbers (13-34%). However, fungal inoculation influenced the root length and surface area depending on their species and combinations, with the greatest benefits occurring on S. kiliense inoculation alone and its co-inoculation with Monosporascus sp. (109% and 61%; 54% and 42%). Although A. chlamydospora and co-inoculations with S. kiliense and Monosporascus sp. also appeared to promote root growth, these inoculations resulted in obvious soil acidification. Despite no observed root growth promotion, Monosporascus sp. associated with its combined inoculations maximally facilitated soil organic carbon accumulation. However, noticeably, combined inoculation of the three species had no significant effects on root length, surface area, and biomass, but promoted rhizospheric fungal diversity and abundance most, with Sordariomycetes being the dominant fungal group. This indicates the response of plant growth to fungal inoculation may be different from that of the rhizospheric fungal community. Structural equation modeling also demonstrated that fungal inoculation significantly influenced the interactions among the growth of A. adsurgens, soil factors, and rhizospheric fungal groups. Our findings suggest that, based on species-specific and combinatorial effects, endophytic fungi enhanced the plant root growth, altered soil nutrients, and facilitated rhizospheric fungal community, possibly contributing to desert plant performance and ecological adaptability. These results will provide the basis for evaluating the potential application of fungal inoculants for developing sustainable management for desert ecosystems.

Fungal Lignocellulose Utilisation Strategies from a Bioenergetic Perspective: Quantification of Related Functional Traits Using Biocalorimetry

In the present study, we investigated whether a non-invasive metabolic heat flux analysis could serve the determination of the functional traits in free-living saprotrophic decomposer fungi and aid the prediction of fungal influences on ecosystem processes. For this, seven fungi, including ascomycete, basidiomycete, and zygomycete species, were investigated in a standardised laboratory environment, employing wheat straw as a globally relevant lignocellulosic substrate. Our study demonstrates that biocalorimetry can be employed successfully to determine growth-related fungal activity parameters, such as apparent maximum growth rates (AMGR), cultivation times until the observable onset of fungal growth at AMGR (tAMGR), quotients formed from the AMGR and tAMGR (herein referred to as competitive growth potential, CGP), and heat yield coefficients (YQ/X), the latter indicating the degree of resource investment into fungal biomass versus other functional attributes. These parameters seem suitable to link fungal potentials for biomass production to corresponding ecological strategies employed during resource utilisation, and therefore may be considered as fungal life history traits. A close connection exists between the CGP and YQ/X values, which suggests an interpretation that relates to fungal life history strategies.

Optimizing the Culture Medium of Lasiodiplodia sp. to Improve the Yield of Ethyl Acetate Extract as an Antimicrobial Source

Endophytes often inhabit plant tissues and cause no disease symptoms. Lasiodiplodia is generally considered a pathogenic fungus, but such a genus is capable of producing high-value bioactive molecules, such as enzymes, secondary metabolites including antimicrobials. Therefore, Lasiodiplodia sp. endophyte was cultivated in static mode for 12 days and EtOAc extracts were obtained and evaluated against pathogens afterward. Fermentation parameters (glucose, sucrose and NaNO₃) were optimized by the factorial design and response surface methodology, as these are powerful tools to provide reliable information about fungal culture conditions and EtOAc extract yields were considered as response variables. Lasiodiplodia growth curve indicated that optimal production of EtOAc extract mass was achieved after 12 days of fermentation (284 mg 300 mL^-1 broth), which is in agreement with values obtained from validation tests. Minimum Inhibitory Concentration (MIC) and Minimum Microbicidal Concentration (MMC) essays suggested that the endophyte produce substances presenting antimicrobial and antifungal activities against ATCC Staphylococcus aureus and Candida albicans strains at optimum point under evaluated conditions. MIC values ranged between 50 and 100 µg mL^-1 for both pathogens, while MMC of C. albicans ranged from 100 to 200 µg mL^-1, which evidence its fungicidal effect. Furthermore, it was found that the EtOAc extract yield can be increased by optimizing carbon and nitrogen sources in endophyte cultivation, and there was good agreement between predicted and experimental values under optimized conditions. Thus, Lasiodiplodia fungi are promising sources of antimicrobials and changes in carbon and nitrogen sources can improve the yield of secondary metabolites according to the factorial design.

Characterization of the Growth and Morphology of a BSL-2 Coccidioides posadasii Strain That Persists in the Parasitic Life Cycle at Ambient CO2

Coccidioides is a dimorphic fungus responsible for Valley Fever and is the cause of severe morbidity and mortality in the infected population. Although there is some insight into the genes, pathways, and growth media involved in the parasitic to saprophytic growth transition, the exact determinants that govern this switch are largely unknown. In this work, we examined the growth and morphology of a Coccidioides posadasii strain (C. posadasii S/E) that efficiently produces spherules and endospores and persists in the parasitic life cycle at ambient CO2. We demonstrated that C. posadasii S/E remains virulent in an insect infection model. Surprisingly, under spherule-inducing conditions, the C. posadasii S/E culture was found to be completely hyphal. Differential interference contrast (DIC) and transmission electron microscopy (TEM) revealed unexpected cellular changes in this strain including cell wall remodeling and formation of septal pores with Woronin bodies. Our study suggests that the C. posadasii S/E strain is a useful BSL-2 model for studying mechanisms underlying the parasitic to saprophytic growth transition—a morphological switch that can impact the pathogenicity of the organism in the host.

Xanthoepocin, a photolabile antibiotic of Penicillium ochrochloron CBS 123823 with high activity against multiresistant gram-positive bacteria

Background

With the steady increase of antibiotic resistance, several strategies have been proposed in the scientific community to overcome the crisis. One of many successful strategies is the re-evaluation of known compounds, which have been early discarded out of the pipeline, with state-of-the-art know-how. Xanthoepocin, a polyketide widespread among the genus Penicillium with an interesting bioactivity spectrum against gram-positive bacteria, is such a discarded antibiotic. The purpose of this work was to (i) isolate larger quantities of this metabolite and chemically re-evaluate it with modern technology, (ii) to explore which factors lead to xanthoepocin biosynthesis in P. ochrochloron, and (iii) to test if it is beside its known activity against methicillin-resistant Staphylococcus aureus (MRSA), also active against linezolid and vancomycin-resistant Enterococcus faecium (LVRE)—a very problematic resistant bacterium which is currently on the rise.

Results

In this work, we developed several new protocols to isolate, extract, and quantify xanthoepocin out of bioreactor batch and petri dish-grown mycelium of P. ochrochloron. The (photo)chemical re-evaluation with state-of-the-art techniques revealed that xanthoepocin is a photolabile molecule, which produces singlet oxygen under blue light irradiation. The intracellular xanthoepocin content, which was highest under ammonium-limited conditions, varied considerably with the applied irradiation conditions in petri dish and bioreactor batch cultures. Using light-protecting measures, we achieved MIC values against gram-positive bacteria, including methicillin-resistant Staphylococcus aureus (MRSA), which were up to 5 times lower than previously published. In addition, xanthoepocin was highly active against a clinical isolate of linezolid and vancomycin-resistant Enterococcus faecium (LVRE).

Conclusions

This interdisciplinary work underlines that the re-evaluation of known compounds with state-of-the-art techniques is an important strategy in the combat against multiresistant bacteria and that light is a crucial factor on many levels that needs to receive more attention. With appropriate light protecting measures in the susceptibility tests, xanthoepocin proved to be a powerful antibiotic against MRSA and LVRE. Exploring the light response of other polyketides may be pivotal for re-introducing previously discarded metabolites into the antibiotic pipeline and to identify photosensitizers which might be used for (antimicrobial) photodynamic therapies.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-021-01718-9.

Long-term survival of Chlamydomonas reinhardtii during conditional senescence

Chlamydomonas reinhardtii undergoes conditional senescence when grown in batch culture due to nutrient limitation. Here, we explored plastid and photo-physiological adaptations in Chlamydomonas reinhardtii during a long-term ageing experiment by methodically sampling them over 22 weeks. Following exponential growth, Chlamydomonas entered an extended declining growth phase where cells continued to divide, although at a lower rate. Ultimately, this ongoing division was fueled by the recycling of macromolecules that was obvious in the rapidly declining protein and chlorophyll content in the cell during this phase. This process was sufficient to maintain a high level of cell viability as the culture entered stationary phase. Beyond that the cell viability starts to plummet. During the turnover of macromolecules after exponential growth that saw RuBisCO levels drop, the LHCII antenna was relatively stable. This, along with the upregulation of the light stress-related proteins (LHCSR), contributes to an efficient energy dissipation mechanism to protect the ageing cells from photooxidative stress during the senescence process. Ultimately, viability dropped to about 7% at 22 weeks in a batch culture. We anticipate that this research will help further understand the various acclimation strategies carried out by Chlamydomonas to maximize survival under conditional senescence.

Extraction and optimization of Penicillium sclerotiorum strain AK-1 pigment for fabric dyeing

Recently, the demand for fungal pigments has increased due to their several benefits over synthetic dyes. Many species of fungi are known to produce pigments and a large number of fungal strains for pigment production are yet to be extensively investigated. The natural pigment from sustainable natural sources has good economic and industrial value. Many synthetic colorants used in textile and various industries have many harmful effects on the human population and environment. Pigments and coloring agents may be extracted from a wide range of fungal species. These compounds are among the natural compounds having the most significant promise for medicinal, culinary, cosmetics, and textile applications. This study attempts to isolate and optimize the fermentation conditions of Penicillium sclerotiorum strain AK-1 for pigment production. A dark yellow-colored pigment was isolated from the strain with significant extractive value and antioxidant capacity. This study also identifies that the pigment does not have any cytotoxic effect and is multicomponent. The pigment production was optimized for the parameters such as pH, temperature, carbon and nitrogen source. Fabric dyeing experiments showed significant dyeing capacity of the pigment on cotton fabrics. Accordingly, the natural dye isolated from P. sclerotiorum strain AK-1 has a high potential for industrial-scale dyeing of cotton materials.

Enhanced culturing techniques for the mycobiont isolated from the lichen Xanthoria parietina

Lichens and their isolated symbionts are potentially valuable resources for biotechnological approaches. Especially mycobiont cultures that produce secondary lichen products are receiving increasing attention, but lichen mycobionts are notoriously slow-growing organisms. Sufficient biomass production often represents a limiting factor for scientific and biotechnological investigations, requiring improvement of existing culturing techniques as well as methods for non-invasive assessment of growth. Here, the effects of pH and the supplement of growth media with either D-glucose or three different sugar alcohols that commonly occur in lichens, D-arabitol, D-mannitol and ribitol, on the growth of the axenically cultured mycobiont isolated from the lichen Xanthoria parietina were tested. Either D-glucose or different sugar alcohols were offered to the fungus at different concentrations, and cumulative growth and growth rates were assessed using two-dimensional image analysis over a period of 8 weeks. The mycobiont grew at a pH range from 4.0 to 7.0, whereas no growth was observed at higher pH values. Varying the carbon source in Lilly-Barnett medium (LBM) by replacing 1% D-glucose used in the originally described LBM by either 1%, 2% or 3% of D-mannitol, or 3% of D-glucose increased fungal biomass production by up to 26%, with an exponential growth phase between 2 and 6 weeks after inoculation. In summary, we present protocols for enhanced culture conditions and non-invasive assessment of growth of axenically cultured lichen mycobionts using image analysis, which may be useful for scientific and biotechnological approaches requiring cultured lichen mycobionts.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s11557-021-01707-7.

Production and characterization of melanin pigments derived from Amorphotheca resinae

As melanin has emerged as functional pigment with cosmetic, health and food applications, the demand for the pigments is expected to increase. However, the conventional sources (e.g. mushroom, hair, and wool) of melanin production entail pigments inside the substrates which requires the costly extraction procedures, leading to inappropriate scalable production. In this study, we screened 102 of fungal isolates for their ability to produce melanin in the supernatant and selected the only Amorphotheca resinae as a promising candidate. In the peptone yeast extract glucose broth, A. resinae produced the melanin rapidly during the autolysis phase of growth, reaching up 4.5 g/L within 14 days. Structural characterization of the purified melanin from A. resinae was carried out by using elemental analysis, electron paramagnetic resonance, ¹³C solid-state nuclear magnetic resonance spectroscopy, and pyrolysis-gas chromatography-mass spectrometry in comparison with the standard melanins. The results indicate that the structural properties of A. resinae melanin is similar to the eumelanin which has a wide range of industrial uses. For example, the purified melanin from A. resinae has the potent antioxidant activities as a result of free radical scavenging assays. Consequently, A. resinae KUC3009 can be a promising candidate for scalable production of industrially applicable melanin.