Arsenic Contamination of Groundwater and Its Implications for Drinking Water Quality and Human Health in Under-Developed Countries and Remote Communities—A Review

Predicting the risk of arsenic accumulation in soil-rice system in Asian monsoon region

Rice is a staple food for a significant portion of the global population. Arsenic (As) accumulated in rice grains influences rice quality which threatens human health. In this study, we used three machine learning models to predict arsenic accumulation in rice based on over 300 surveys. The prediction results of soil arsenic indicate that high-arsenic soil areas are mainly distributed in South and Southeast Asia such as India, China, and Thailand. In addition, higher bioaccumulation factors (BAF), associated with higher temperature, are predominantly observed in eastern India and southern Myanmar. However, arsenic content in soil is relatively lower in these areas. About 5.5 billion population may be threatened by the consumption of high-arsenic rice. It can be concluded that temperatures may influence the BAF except for soil arsenic, and soil physicochemical properties. Further research on the relationship between climate parameters and BAF should be conducted to address and adapt to future climate change. Additionally, understanding the mechanism of arsenic accumulation under different climatic conditions is crucial for developing agricultural technologies to reduce arsenic accumulation in rice.

Spatial pattern of groundwater arsenic contamination in Patna, Saran, and Vaishali districts of Gangetic plains of Bihar, India

Groundwater is an essential source of drinking as well as irrigation water. It has recently become a significant challenge to maintain good and safe drinking water for all living beings. The continuous supply of arsenic detected in groundwater poses a severe health problem and has adverse effects on humans and the ecosystem. Researchers also identified arsenic contamination globally across various regions. However, a few studies also identified that the groundwater of Patna, Saran, and Vaishali districts of Bihar is intoxicated by arsenic. To assess the toxic level of arsenic in groundwater, samples from various GPS-based pointed locations were collected from the study area using a GARMIN GPS device. The total concentration of arsenic in drinking water (mostly traces of arsenic, level of μg L-1 or less) can be detected only by sophisticated analytical techniques such as ICP-MS, GF-AAS, and HG-AAS. The standard procedures were followed to determine quality attributes in groundwater. Arsenic contamination persists in most areas and exceeds the permissible limits prescribed by the World Health Organization (WHO), negatively impacting the health of more than 10 million people in the state. The 90.47% and 85.71% groundwater samples of the study area exceeded the permissible limit of the WHO (0.01 mg L-1) and Bureau of Indian Standards (BIS (0.05 mg L-1), respectively. The analyzed data was obtained, and variability was noticed in total arsenic concentrations ranging from 0.002 to 7.801 mg L-1, with a mean value of 0.87 mg L-1. Similarly, the water quality attribute like total dissolved solids were identified in 14.28% of samples, which crossed 201 to 1026 mg L-1, with a mean value of 375.33 mg L-1.

Separation of plant protection products from complex aqueous bodies using carbon-mineral composites incorporated with double metals (Ni/Mn or Ni/Fe)

Due to the extensive application of pesticides and their hazardous effects on organisms, there is an urgent need to remove them effectively from wastewater. Metal-incorporated carbon-mineral composites (Ni/Mn-CMC and Ni/Fe-CMC) described in this paper can certainly be applied for this purpose. They were synthesized by combining mechanochemical and pyrolytic processes and their physicochemical properties were investigated using numerous methods (SEM-EDS, N2 adsorption/desorption, XRD, surface charge, FTIR). Adsorption capacity towards diuron and carboxin with and without impurities commonly detected in natural ecosystems, cadmium ions or arsenite, was measured. The obtained results indicated that Ni/Fe-CMC is more efficient adsorbent of pesticides due to its well-developed surface. It was able to bind 158.34 mg g-1 of diuron and 133.58 mg g-1 of carboxin in the solutions, where only one pesticide was present. In turn, these values for the Ni/Mn-CMC sample were 126.49 mg g-1 and 102.08 mg g-1, respectively. It should be noted that the composites maintained their high adsorption capacity in the multicomponent solutions, i.e., containing both pesticide and metal ions. Then, the maximum reduction in pesticide adsorption was only 8.36. Ni/Mn-CMC and Ni/Fe-CMC were successfully regenerated with ethanol without changing their structure and adsorption capacity. Also, the extracts from investigated materials did not have negative impact on plant growth. This confirmed suitability of carbon-mineral composites for repeated multiple use without toxic effects to organisms.

Synthesis of Berberis aristate rhizome extract stabilized magnesium nanoparticles using green chemistry: rhizome characterization, in vitro antimicrobial and anti-inflammatory activity

In the present study, magnesium nanoparticles (Mg NPs) were synthesized utilizing an aqueous extract of Berberis aristate rhizome and evaluated for antimicrobial and anti-inflammatory activity. Technofunctional properties of rhizome powder were evaluated and during thermal stability evaluation four stages of decomposition with a maximum delta Y value of 76.04 % was observed. Optimization of Mg NPs was carried out by employing eight different concentrations (C1-C8)   and the C4 showed maximum absorbance at 330 nm confirming the NPs synthesis. The Mg NPs showed the particle size of 62 nm, zeta potential of -24.7 mV and hexagonal mprphology. Potential inhibition against S. aureus and E. coli (76.78 ± 0.05% and 74.62 ± 0.17%)and anti-inflammatory activity ranging from 42.43 ± 0.07-82.92 ± 0.04% was observed for Mg NPs. Therefore, green synthesis of Mg NPs is a promising approach for the development ofbiological active NPs to cure microbial infections.

Assessment of groundwater quality for human consumption and its health risks in the Middle Magdalena Valley, Colombia

Groundwater is the primary source of water for people living in rural areas, especially during seasons when surface water is contaminated or unavailable. In Colombia, people use groundwater as drinking water without additional treatment. In addition, there is no infrastructure for wastewater collection and sewage treatment in the region of the Middle Magdalena Valley. The current study aims to evaluate the quality of groundwater in this region to determine any potential health hazards associated with its consumption. To reach the objective, three (3) physicochemical and microbiological sampling campaigns were carried out during different hydrological periods. A total of 428 groundwater samples were analyzed for over 28 parameters. The results were compared with the water quality standards proposed by the US EPA and Colombian regulations for human consumption. The analysis revealed the presence of total and fecal coliforms in 89% and 58% of the analyzed samples, respectively, identifying them as the main contaminants in groundwater. Furthermore, the pH levels did not meet the standards set by the US EPA in 33.8% of the cases and by Colombian regulations in 31.02%. Additionally, 32.8%, 17.6%, 14.3%, and 10.9% of the samples failed to meet the established thresholds for apparent color, magnesium, iron, and nitrates, respectively, under both standards. Moreover, only the analyses of selenium, mercury, and zinc complied with the quality standards under both regulatory frameworks. Based on the Colombian Drinking-Water Quality Risk Index (CDWQRI-IRCA), the risk associated with water quality meant for human consumption was assessed. The results showed that over 84% of the samples analyzed posed a high risk to human health, 4.6% posed a medium risk, 5.5% posed a low risk, and only 5.7% posed no risk at all. Additionally, official mortality statistics for children under four years old were reviewed, which revealed two deaths in 2019 due to Acute Diarrheal Disease (ADD) caused by consumption of contaminated water. Therefore, it is crucial to implement water treatment systems, establish aqueducts in rural areas, and conduct rigorous and systematic monitoring of drinking water to ensure it is safe for human consumption. It is also important to track morbidity and mortality rates associated with water consumption.

Hydrogeochemical properties of groundwater and associated human health hazards in coastal multiaquifers of India

Due to the scarcity of water supplies, coastal groundwater quality most importantly influences sustainable development in the coastal region. Rising groundwater pollution through heavy metal contamination is an intense health hazard and environmental concern worldwide. This study shows that 27%, 32%, and 10% of the total area come under the categories very high, high, and very low human health hazard index (HHHI) accordingly. This area's water quality is also much polluted; the study shows approximately 1% has very good water quality. High concentrations of Fe, As, TDS, Mg2+, Na, and Cl- are relatively noticed in the portion of the western part of this district. The concentration of heavy metals in coastal aquifers influences the groundwater pollution of that region. The average heavy metal concentration in this region is 0.20 mg/l (As) and 1.160 mg/l (TDS). The groundwater quality and hydrogeochemical properties are determined through the Piper diagram. The study stated that TDS, Cl- (mg/l), and Na+ (mg/l) are the most regulatory issues of vulnerability. In the present study region, a huge number of alkaline substances are present resulting in the water being unfit for drinking purposes. Lastly, it is clear from the study's findings that multiple risks exist there like As, TDS, Cl-, and other hydrochemical parameters in the groundwater. The proposed approach applied in this research work may be a pivotal tool for predicting groundwater vulnerability in other regions.

Removal of arsenic from jarosite waste using hydrometallurgical treatment

The jarosite waste used during this study consists of minute amount of arsenic that has a potential to be leached into environment when kept in open area. This study tried to recover arsenic from jarosite waste using hydrometallurgical treatment. The comprehensive characterization of jarosite samples was performed using various analytical techniques, including X-ray diffraction (XRD), Fourier transform Infrared (FTIR), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX), and it was characterized as natrojarosite. For optimal removal of arsenic, the response surface methodology (RSM) was applied with the key factors, including dosage (A), time (B), temperature (C), and acid concentration (D) on the recovery of arsenic. The results indicated that the dosage (A) and acid concentration (D) demonstrated significant positive effects on arsenic recovery. As expected, the higher dosage and acid concentration was associated with increased recovery percentages for the arsenic from jarosite. Whereas time (B) and temperature (C) did not exhibit statistically significant recovery of arsenic within the specified experimental range. The contour plots showed the optimal operating conditions for the highest recovery percentage was approximately 52.61% when 2.5 g of jarosite was treated with 10 mol/L acid for 150 min at operating temperature of 80°. Although our study showed very moderate recovery of arsenic, it is first report where arsenic has been removed from jarosite waste. Readjustment of range of operating parameters would provide more insight into the further optimization of the yield.

Synthesis of cellulose cotton-based UiO-66 MOFs for the removal of rhodamine B and Pb(II) metal ions from contaminated wastewater

The presence of pollutants in drinking water has become a significant concern recently. Various substances, including activated carbon, membranes, biochar, etc., are used to remove these pollutants. In the present study, a new composite comprising cotton fabric and a mixture of Metal-Organic Frameworks (MOFs) was synthesized and used as an adsorbent for eliminating pollutants from wastewater. At first, the UiO-66 MOFs were prepared by a simple method of reacting Zirconium (IV) chloride (ZrCl4) and p-Phthalic acid (PTA) after successful preparation of UiO-66 then modified its surface with amino functional groups by reacting with APTES to obtain UiO-66-NH2. Moreover, the cellulose cotton fabric (CF) surface was modified with Polydopamine (PDA) and obtained CF@PDA. Further, with the help of EDC-HCl and NHS, the UiO-66-NH2 grafted on the surface of the CF@PDA and finally obtained CF@PDA/UiO-66-NH2. In addition, the adsorption study was performed toward RhB dye and Pb(II) metal ion pollutants. The maximum adsorption toward RhB dye was 68.5 mg/g, while toward Pb(II) metal ions was 65 mg/g. In addition, the kinetic study was also conducted and the result favoured the Pseudo-second order kinetic study. The adsorption isotherm was also studied and the Langmuir model was more fitted as compared with the Freundlich model. Moreover, the material has excellent regeneration and recycling ability after ten cycles. The significant adsorption ability, the novel combination of cotton and MOFs, and the recycling feature make our material CF@PDA/UiO-66-NH2 a promising potential absorbent material for wastewater treatment and even in other important areas of water research.

Transfer of Bisphenol A and Trace Metals from Plastic Packaging to Mineral Water in Ouagadougou, Burkina Faso

The consumption of packaged water is growing rapidly in both urban and rural centres in Burkina Faso. Bisphenol A (BPA) and trace metals are among the compounds used in the manufacture of plastic packaging, and their presence in water can pose a health risk to consumers due to their alleged toxicity. Therefore, this study explores the transfer of these compounds from plastic packaging to mineral water in Sudano-Sahelian climatic conditions. Ten samples of packaged sachet water commercialised in Ouagadougou were studied. An absence of BPA in the borehole water used to produce packaged water has been shown. The transfer of BPA into mineral water increases with storage temperature. The BPA that appears in packaged water degrades over time. BPA concentrations ranged from 0 to 0.38 mg/L after two weeks of storage, 0 to 0.8 mg/L after four weeks of storage and 0 to 0.35 mg/L after 8 weeks of storage. Analysis of the trace metals showed steadily increasing concentrations from the second to the sixth weeks, with concentrations ranging from 0 to 9.7 µg/L for cadmium and from 0 to 0.13 mg/L for iron in the sachet water samples.

Longevity evaluation of non-pumping reactive wells for control of groundwater contamination: Application of upscaling methods

Non-pumping reactive wells (NPRWs) are subsurface structures used for the passive treatment of contaminated groundwater using wells containing reactive media. In the vicinity of NPRWs, a combination of hydrogeological and chemical processes makes it difficult to predict their longevity. In this study, we evaluated the longevity of NPRWs using the upscaling methods. A horizontal two-dimensional sandbox was constructed to mimic the hydrogeological and chemical processes in a single unit of NPRW (unit NPRW). The groundwater flow and solute transport were simulated numerically to validate the processes of contaminant spreading prevention in the sandbox. Dye tracing and arsenic transport tests showed different performance of NPRW due to induced flow and uneven consumption of reactivity, which is dependent on the pathway length and residence time of the coal waste. Through numerical modeling of the experiments, the fate-related processes of contamination around NPRW were described in detail in both spatial and temporal terms. The stepwise approach of the upscaling methods was used to predict the contamination-blocking performance of the entire facility based on the reactivity of the materials and the contamination removal of the unit NPRW.

Brevibacterium sp. strain CS2: A potential candidate for arsenic bioremediation from industrial wastewater

A multiple metal-resistant Brevibacterium sp. strain CS2, isolated from an industrial wastewater, resisted arsenate and arsenate upto 280 and 40 mM. The order of resistance against multiple metals was Arsenate > Arsenite > Selenium = Cobalt > Lead = Nickel > Cadmium = Chromium = Mercury. The bacterium was characterized as per morphological and biochemical characteristics at optimum conditions (37 ℃ and 7 pH). The appearance of brownish color precipitation was due to the interaction of silver nitrate confirming its oxidizing ability against arsenic. The strain showed arsenic processing ability at different temperatures, pH, and initial arsenic concentration which was 37% after 72 h and 48% after 96 h of incubation at optimum conditions with arsenite 250 mM/L (initial arsenic concentration). The maximum arsenic removal ability of strain CS2 was determined for 8 days, which was 32 and 46% in wastewater and distilled water, respectively. The heat-inactivated cells of the isolated strain showed a bioremediation efficiency (E) of 96% after 10 h. Genes cluster (9.6 kb) related to arsenite oxidation was found in Brevibacterium sp. strain CS2 after the genome analysis of isolated bacteria through illumine and nanopore sequencing technology. The arsenite oxidizing gene smaller subunit (aioB) on chromosomal DNA locus (Prokka_01508) was identified which plays a role in arsenite oxidation for energy metabolism. The presence of arsenic oxidizing genes and an efficient arsenic oxidizing potential of Brevibacterium sp. strain CS2 make it a potential candidate for green chemistry to eradicate arsenic from arsenic-contaminated wastewater.

Water Quality Index and Human Health Risk Assessment of Drinking Water in Selected Urban Areas of a Mega City

The present study was conducted to evaluate the quality of drinking water and assess the potential health hazards due to water contaminants in selected urban areas of Lahore, Pakistan. Water samples were collected from ten sites and analyzed for different physico-chemical parameters including turbidity, color, pH, total dissolved solids (TDS), nitrates, fluoride, residual chlorine, and total hardness. Additionally, heavy metal (arsenic) and microbial parameters (E. coli) were also determined in the water samples. Drinking water quality evaluation indices, including the water quality index (WQI) for physico-chemical and biological parameters and human health risk assessment (HHRA) for heavy metal were estimated using the analytical results of the target parameters. It was found in most of the areas that the levels of arsenic, fluoride, TDS, and residual chlorine were higher than those recommended by the National Environmental Quality Standard (NEQS) and World Health Organization (WHO) guidelines. In addition to the physico-chemical parameters, microbial content (E. coli) was also found in the drinking water samples of the selected areas. Statistical analysis of the results indicated that levels of target parameters in drinking water samples are significantly different between sampling sites. The WQI for all physico-chemical and microbial parameters indicated that drinking water in most of the areas was unfit and unsuitable (WQI > 100) for drinking purposes except for the water of Bhatti Gate and Chota Gaon Shahdara with a WQI of 87 and 91, respectively. Drinking water in these areas had a very poor WQI rating. According to HHRA, drinking water from the selected sites was found to be of high risk to children and adults. The carcinogenic risk of arsenic indicated that all samples were of high risk to both adults and children (4.60 and 4.37 × 10^-3, respectively). Regular monitoring of drinking water quality is essential, and proactive measures must be implemented to ensure the treatment and availability of safe drinking water in urban areas.

Microbial biochemical pathways of arsenic biotransformation and their application for bioremediation

Arsenic is a ubiquitous toxic metalloid, the concentration of which is beyond WHO safe drinking water standards in many areas of the world, owing to many natural and anthropogenic activities. Long-term exposure to arsenic proves lethal for plants, humans, animals, and even microbial communities in the environment. Various sustainable strategies have been developed to mitigate the harmful effects of arsenic which include several chemical and physical methods, however, bioremediation has proved to be an eco-friendly and inexpensive technique with promising results. Many microbes and plant species are known for arsenic biotransformation and detoxification. Arsenic bioremediation involves different pathways such as uptake, accumulation, reduction, oxidation, methylation, and demethylation. Each of these pathways has a certain set of genes and proteins to carry out the mechanism of arsenic biotransformation. Based on these mechanisms, various studies have been conducted for arsenic detoxification and removal. Genes specific for these pathways have also been cloned in several microorganisms to enhance arsenic bioremediation. This review discusses different biochemical pathways and the associated genes which play important roles in arsenic redox reactions, resistance, methylation/demethylation, and accumulation. Based on these mechanisms, new methods can be developed for effective arsenic bioremediation.

Arsenic contamination in groundwater and food chain with mitigation options in Bengal delta with special reference to Bangladesh

Bangladesh, situated in Bengal delta, is one of the worst affected countries by arsenic contamination in groundwater. Most of the people in the country are dependent on groundwater for domestic and irrigation purposes. Currently, 61 districts out of 64 districts of Bangladesh are affected by arsenic contamination. Drinking arsenic contaminated groundwater is the main pathway of arsenic exposure in the population. Additionally, the use of arsenic-contaminated groundwater for irrigation purpose in crop fields in Bangladesh has elevated arsenic concentration in surface soil and in the plants. In many arsenic-affected countries, including Bangladesh, rice is reported to be one of the significant sources of arsenic contamination. This review discussed scenario of groundwater arsenic contamination and transmission of arsenic through food chain in Bangladesh. The study further highlighted the human health perspectives of arsenic exposure in Bangladesh with possible mitigation and remediation options employed in the country.

Effects of elevated arsenic and nitrate concentrations on groundwater resources in deltaic region of Sundarban Ramsar site, Indo-Bangladesh region

An attempt has been adopted to predict the As and NO₃^- concentration in groundwater (GW) in fast-growing coastal Ramsar region in eastern India. This study is focused to evaluate the As and NO₃^- vulnerable areas of coastal belts of the Indo-Bangladesh Ramsar site a hydro-geostrategic region of the world by using advanced ensemble ML techniques including NB-RF, NB-SVM and NB-Bagging. A total of 199 samples were collected from the entire study area for utilizing the 12 GWQ conditioning factors. The predicted results are certified that NB-Bagging the most suitable and preferable model in this current research. The vulnerability of As and NO₃^- concentration shows that most of the areas are highly vulnerable to As and low to moderately vulnerable to NO₃. The reliable findings of this present study will help the management authorities and policymakers in taking preventive measures in reducing the vulnerability of water resources and corresponding health risks.

Hydrochemical controls on arsenic contamination and its health risks in the Comarca Lagunera region (Mexico): Implications of the scientific evidence for public health policy

Nearly half of the world's urban population depends on aquifers for drinking water. These are increasingly vulnerable to pollution and overexploitation. Besides anthropogenic sources, pollutants such as arsenic (As) are also geogenic and their concentrations have, in some cases, been increased by groundwater pumping. Almost 40 % of Mexico's population relies on groundwater for drinking water purposes; much the aquifers in semi-arid and arid central and northern Mexico is contaminated by As. These are agricultural regions where irrigation water is primarily provided from intenstive pumping of the aquifers leading to long-standing declines in the water table. The focus of this study is the main aquifer within the Comarca Lagunera region in Northern Mexico. Although the scientific evidence demonstrates that health effects are associated with long-term exposure to elevated As concentrations, this knowledge has not yielded effective groundwater development and public health policy. A multidisciplinary approach - including the evaluation of geochemistry, human health risk and development and public health policy - was used to provide a current account of these links. The dissolved As concentrations measured exceeded the corresponding World Health Organization guideline for drinking water in 90 % of the sampled wells; for the population drinking this water, the estimated probability of presenting non-carcinogenic health effects was >90 %, and the lifetime risk of developing cancer ranged from 0.5 to 61 cases in 10,000 children and 0.2 to 33 cases in 10,000 adults. The results suggest that insufficient policy responses are due to a complex and dysfunctional groundwater governance framework that compromises the economic, social and environmental sustainability of this region. These findings may valuable to other regions with similar settings that need to design and enact better informed, science-based policies that recognize the value of a more sustainable use of groundwater resources and a healthier population.

Arsenic: A Perspective on Its Effect on Pioglitazone Bioavailability

Arsenic (As) is a common contaminant in drinking water in northeastern Mexico, which reduces the expression of cytochrome P450 (CYP 450). This enzyme group metabolizes numerous drugs, such as oral antidiabetic drugs such as pioglitazone (61% CYP 3A4, 49% CYP 2C8). When CYP 450's function is inadequate, it has decreased therapeutic activity in type 2 diabetes mellitus (T2DM). This study aimed to establish the effect of As on pioglitazone metabolism in patients with T2DM.

METHODOLOGY

Urine, water, and plasma samples from a healthy population (n = 11) and a population with T2DM (n = 20) were obtained. Samples were analyzed by fluorescence spectroscopy/hydride generation (As) and HPLC (pioglitazone). Additionally, CYP 3A4 and CYP 2C8 were studied by density functional theory (DFT).

RESULTS

The healthy and T2DM groups were exposed via drinking water to >0.010 ppm, Ka values with a factor of 4.7 higher, Cl 1.42 lower, and ABCt 1.26 times higher concerning the healthy group. In silico analysis (DFT) of CYP 3A4 and CYP 2C8 isoforms showed the substitution of the iron atom by As in the active sites of the enzymes.

CONCLUSIONS

The results indicate that the substitution of Fe for As modifies the enzymatic function of CYP 3A4 and CYP 2C8 isoforms, altering the metabolic process of CYP 2D6 and CYP 3A4 in patients with T2DM. Consequently, the variation in metabolism alters the bioavailability of pioglitazone and the expected final effect.

A data-driven modeling approach for the sustainable remediation of persistent arsenic (As) groundwater contamination in a fractured rock aquifer through a groundwater recirculation well (IEG-GCW®)

Persistent arsenic (As) pollution sources from anthropogenic activities pose a serious threat to groundwater quality. This work aims to illustrate the application of an innovative remediation technology to remove As from a heavily contaminated fractured aquifer at a historically polluted industrial site. Groundwater circulation well (GCW) technology was tested to significantly increase and accelerate the mobilization and removal of As in the source area. The GCW extracts and re-injects groundwater at different depths of a vertical circulation well. By pumping out and reinjecting in different screen sections of the well, the resulting vertical hydraulic gradients create recirculation cells and affect and mobilize trapped contaminants that cannot be influenced by traditional pumping systems. The first 45-m deep IEG-GCW® system was installed in 2020, equipped with 4 screen sections at different depths and with an above-ground As removal system by oxidation and filtration on Macrolite (Enki). A geomodeling approach supports both remediation and multi-source data interpretation. The first months of operation demonstrate the hydraulic effectiveness of the IEG-GCW® system in the fractured rock aquifer and the ability to significantly enhance As removal compared to conventional pumping wells currently feeding a centralized treatment system. The recirculation flow rate amounts to about 2 m³/h. Water pumped and treated by the GCW system is reintroduced with As concentrations reduced by an average of 20%-60%. During the pilot test, the recirculating system removed 23 kg As whilst the entire central pump-and-treat (P&T) system removed 129 kg, although it treated 100 times more water volume. The P&T plant removed 259 mg As per m³ of pumped and treated groundwater while the GCW removed 4814 mg As per m³ of the treated groundwater. The results offer the opportunity for a more environmentally sustainable remediation approach by actively attacking the contamination source rather than containing the plume.

Arsenic Contamination, Water Toxicity, Source Apportionment, and Potential Health Risk in Groundwater of Jhelum Basin, Punjab, Pakistan

Potable groundwater (GW) contamination through arsenic (As) is a commonly reported environmental issue in Pakistan. In order to examine the groundwater quality for As contamination, its geochemical behavior, and other physicochemical parameters, 69 samples from various groundwater sources were collected from the mining area of Pind Dadan Khan, Punjab, Pakistan. The results showed the concentration of elevated As, its source of mobilization, and linked public health risk. Arsenic detected in the groundwater samples varied from 0.5 to 100 µg/L, with an average value of 21.38 µg/L. Forty-two samples were beyond the acceptable limit of 10 µg/L of the WHO for drinking purposes. The statistical summary showed that the groundwater cation concentration was in decreasing order such as Na⁺  > Ca²⁺  > Mg²⁺ > K⁺, while anions were as follows: HCO₃^- > SO4^2- > Cl^- > NO₃^-. Hydrochemical facies results depicted that groundwater samples belong to CaHCO₃ type. Rock-water interactions control the hydrochemistry of groundwater. Saturation indices' results indicated the saturation of the groundwater sources for CO₃ minerals due to their positive SI values. Such minerals include aragonite, calcite, dolomite, and fluorite. The principal component analysis (PCA) findings possess a total variability of 77.36% suggesting the anthropogenic and geogenic contributing sources of contaminant. The results of the Exposure-health-risk-assessment model for measuring As reveal significant potential carcinogenic risk exceeding the threshold level (value > 10^-4) and HQ level (value > 1.0).

Using a soft computing OSPRC risk framework to analyze multiple contaminants from multiple sources; a case study from Khoy Plain, NW Iran

Water shortage in arid and semi-arid areas like Iran makes groundwater contamination a crucial issue. In the Khoy aquifer, NW Iran, contaminants (e.g., arsenic (As), nitrate (NO₃^-), lead (Pb), and zinc (Zn)) may originate from both geological and anthropogenic sources. The objectives of the study are to (1) employ soft modeling framework to abstract available hydrogeochemical information into a perceptual model and (2) build a conceptual model using the risk cells (RCs) by applying the following two steps: (i) study Origin-Source-Pathways-Receptor-Consequence (OSPRC) as a risk system; and (ii) apply "soft modeling" as a set of diverse and classical tools including graphical representations, geological surveys, and multivariate statistical analysis to validate the information by evaluating their convergence or divergence behaviors among different tools used for investigating the groundwater contaminants. According to the perceptual model, the Khoy aquifer contains four RCs. RC4 (southern of plain) and RC2 (northern of the plain) contain high levels of As, while RC2 contains high amounts of Zn. In RC1 (northern of plain) and RC3 (middle of plain), a high concentration of Pb is detected, while in RC3 and RC4, there is a high concentration of NO₃^-. It was found that a soft modeling approach can only identify the dominant hydrogeochemical processes for each RC as a descriptive model, rather than the use of quantitative models if sufficient data are available.

Collaborative Construction of a Silver Nanocluster Fluorescent Probe Using the Pyridinium-Based Ionic Liquid [C4py][DCA]

A silver nanocluster fluorescent probe was synthesized by using the pyridinium-based ionic liquid [C₄py][DCA] as the protective agent, AgNO₃ as the precursor, and NaBH₄ as the reducing agent. The presence of pyridine group enhanced the fluorescence intensity of Ag nanoclusters and facilitated the coordination interaction between Ag nanoclusters and AsO₃ ^3-. Therefore, the collaborative construction of a silver nanocluster probe using the pyridinium-based ionic liquid [C₄py][DCA] offered outstanding selectivity and sensitivity to detect AsO₃ ^3- in water. More interestingly, the fluorescent probe quenched by AsO₃ ^3- could be recovered with the addition of H₂O₂. This fluorescent probe provided a rapid and superior method for the detection of As(III) in the linear concentration range of 0-60 ppb with the lowest detection limit of 0.60 ppb. The mechanism of fluorescence quenching was a static quenching, considered to be due to electron migration between functional groups on the surface of Ag nanoclusters constructed with [C₄py][DCA] and AsO₃ ^3-.

Arsenic Exposure via Contaminated Water and Food Sources

Arsenic poisoning constitutes a major threat to humans, causing various health problems. Almost everywhere across the world certain “hotspots” have been detected, putting in danger the local populations, due to the potential consumption of water or food contaminated with elevated concentrations of arsenic. According to the relevant studies, Asia shows the highest percentage of significantly contaminated sites, followed by North America, Europe, Africa, South America and Oceania. The presence of arsenic in ecosystems can originate from several natural or anthropogenic activities. Arsenic can be then gradually accumulated in different food sources, such as vegetables, rice and other crops, but also in seafood, etc., and in water sources (mainly in groundwater, but also to a lesser extent in surface water), potentially used as drinking-water supplies, provoking their contamination and therefore potential health problems to the consumers. This review reports the major areas worldwide that present elevated arsenic concentrations in food and water sources. Furthermore, it also discusses the sources of arsenic contamination at these sites, as well as selected treatment technologies, aiming to remove this pollutant mainly from the contaminated waters and thus the reduction and prevention of population towards arsenic exposure.

A Review and Analysis of Water Research, Development, and Management in Bangladesh

This paper presents a review of water research, development, and management in Bangladesh, with examples drawn from the past and present. A bibliometric analysis is adopted here to analyze the water-related publication data of Bangladesh. Water-quality-related research is the dominating research field in Bangladesh as compared to water-quantity (floods and droughts)-related ones. The most productive author was found to be Ahmed KM for water-related publication in Bangladesh. The arsenic contamination in Bangladesh has received the highest attention (13 out of the top 15 highly cited papers are related to arsenic contamination). Climate-change-related topics have been showing an increasing trend in research publications over the last 5 years. Bangladesh Delta Plan 2100, prepared recently, is a visionary master plan that is expected to shape water management in Bangladesh in the coming decades to adapt to climate change. A set of recommendations is made here to achieve sustainable water management in Bangladesh.

Arsenate removal on the iron oxide ion exchanger modified with Neodymium(III) ions

In this study the iron oxide ion exchanger with the quaternary ammonium groups, Ferrix A33E was modified with neodymium (III) ions in order to obtain the new material Ferrix A33E-Nd(III) characterized by greater sorption efficiency of arsenate(V) ions. A33E-Nd(III) was described by various techniques including scanning electron microscopy SEM, nitrogen adsorption/desorption isotherms, Fourier transform infrared spectroscopy FTIR and X-ray photoelectron spectroscopy XPS. The point of zero charge, pH_PZC was also determined. The kinetic and thermodynamic parameters of the arsenate(V) sorption were calculated. The experimental data was fitted to the four isotherm models - Langmuir, Freundlich, Dubinin-Radushkevich and Halsey. Kinetic and equilibrium studies allowed to get to know the behaviour of arsenate(V) ions during the sorption on A33E-Nd(III). The obtained material A33E-Nd(III)- was found to possess a larger maximum sorption capacity than A33E, great stability and the possibility of regeneration at least 3 times without a significant decrease in efficiency. This allows for the complete removal of As(V) ions from a solution with a concentration of 50 mg/dm³ in just 30 min. The Nd(III)-modification improved the sorption properties of the tested ion exchanger.

Development of a New Dolomite-Based Adsorbent with Phosphorus and the Adsorption Characteristics of Arsenic (III) in an Aqueous Solution

In recent decades, the removal of hazardous chemicals that have entered wastewater and groundwater as a result of industrial and consumer activities has become an issue of concern. Specifically, removing arsenic (III) from groundwater is critical and equally crucial in the use of low-cost, efficient adsorbent materials. One purpose of this study was to develop a low-cost hydroxyapatite adsorbent (Ca5(PO4)3OH) by reacting the Ca component of calcined dolomite with phosphorus, and another was to apply the developed adsorbent to remove arsenic (III) from well water in developing countries. In this study, phosphorus adsorption was performed on thermally calcined dolomite, and the adsorption isotherm of the phosphorus study was investigated on selected calcined dolomite. The maximum amount of phosphorus on the selected calcined dolomite was 194.03 mg-P/g, and the Langmuir isotherm model was fitted. Arsenic (III) adsorption was investigated in a wide pH range (pH 2~12) using the new adsorbent. The amount of arsenic (III) adsorbed was 4.3 mg/g. The new absorbent could be effective in removing arsenic (III) and become an affordable material.

Significance of Shewanella Species for the Phytoavailability and Toxicity of Arsenic-A Review

Simple Summary

The availability of some toxic heavy metals, such as arsenic (As), is related to increased human and natural activities. This type of metal availability in the environment is associated with various health and environmental issues. Such problems may arise due to direct contact with or consumption of plant products containing this metal in some of their parts. A microbial approach that employs a group of bacteria (Shewanella species) is proposed to reduce the negative consequences of the availability of this metal (As) in the environment. This innovative strategy can reduce As mobility, its spread, and uptake by plants in the environment. The benefits of this approach include its low cost and the possibility of not exposing other components of the environment to unfavourable consequences.

Abstract

The distribution of arsenic continues due to natural and anthropogenic activities, with varying degrees of impact on plants, animals, and the entire ecosystem. Interactions between iron (Fe) oxides, bacteria, and arsenic are significantly linked to changes in the mobility, toxicity, and availability of arsenic species in aquatic and terrestrial habitats. As a result of these changes, toxic As species become available, posing a range of threats to the entire ecosystem. This review elaborates on arsenic toxicity, the mechanisms of its bioavailability, and selected remediation strategies. The article further describes how the detoxification and methylation mechanisms used by Shewanella species could serve as a potential tool for decreasing phytoavailable As and lessening its contamination in the environment. If taken into account, this approach will provide a globally sustainable and cost-effective strategy for As remediation and more information to the literature on the unique role of this bacterial species in As remediation as opposed to conventional perception of its role as a mobiliser of As.

Arsenic biotransformation and mobilization: the role of bacterial strains and other environmental variables

Over several decades, arsenic (As) toxicity in the biosphere has affected different flora, fauna, and other environmental components. The majority of these problems are linked with As mobilization due to bacterial dissolution of As-bearing minerals and its transformation in other reservoirs such as soil, sediments, and ground water. Understanding the process, mechanism, and various bacterial species involved in these processes under the influence of some ecological variables greatly contributes to a better understanding of the fate and implications of As mobilization into the environments. This article summarizes the process, role, and various types of bacterial species involved in the transformation and mobilization of As. Furthermore, insight into how Fe(II) oxidation and resistance mechanisms such as methylation and detoxification against the toxic effect of As(III) was highlighted as a potential immobilization and remediation strategy in As-contaminated sites. Furthermore, the significance and comparative advantages of some useful analytical tools used in the evaluation, speciation, and analysis of As are discussed and how their in situ and ex situ applications support assessing As contamination in both laboratory and field settings. Nevertheless, additional research involving advanced molecular techniques is required to elaborate on the contribution of these bacterial consortia as a potential agronomic tool for reducing As availability, particularly in natural circumstances. Graphical abstract. Courtesy of conceptual model: Aminu Darma.

Polyethylenimine-Modified Magnetic Chitosan for the Uptake of Arsenic from Water

The removal of heavy metals from water has become a global environmental problem. Various materials have been applied as adsorbent to remove metals from water. In this field, nanomaterials have been gaining increasing interest due to their exceptional properties. In this work, we discuss the synthesis of a core-shell structure nanocomposite by the modification of magnetic chitosan (CS) (Fe3O4/CS) with polyethylenimine (PEI) to produce Fe3O4/CS/PEI composite for the adsorption of arsenic ions (As(V) and As(III)) from aqueous solution. The synthesized materials were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscope (TEM), and vibrating sample magnetometer (VSM). The results indicated the successful combination of three components of the nanocomposite. The adsorption conditions were optimized by studying the effect of different parameters included pH, contact time, initial concentration, and adsorbent dosage. The optimum adsorption pH was found to be 6.7 while the optimum adsorbent dosage was found to be 2.0 and 1.5 g/L for As(III) and As(V), respectively. The removal efficiency for the uptake of As(III) and As(V) ions over Fe3O4/CS/PEI nanocomposite at optimum conditions was found to be 99.5 and 99.7%, respectively. The experimental results were fitted using Freundlich’s and Langmuir’s isotherms. The data were more fitted to Langmuir isotherm providing a suggestion of monolayer adsorption with maximum adsorption capacity equal to 77.61 and 86.50 mg/g for the removal of As(III) and As(V), respectively. Moreover, linear regression coefficient (R2) indicated that the adsorption of arsenic ions over the synthesized magnetic nanocomposite obeyed pseudo 2nd order suggesting the chemisorption process. The reusability of the nanosorbent for arsenic uptake using sodium hydroxide as eluent was also assessed up to five cycles. Interestingly, Fe3O4/CS/PEI nanocomposite can be considered as a promising adsorbent for As ions’ removal from water and should be tested for the removal of other pollutants.