Zinc Oxide for Functional Textile Coatings: Recent Advances

Flexible and Durable Direct Ink Writing 3D-Printed Conductive Fabrics for Smart Wearables

Functional fabrics have broad applications in smart wearables, offering diverse functions, such as sensing, energy harvesting, and actuation. The use of 3D printing to deposit functional materials onto textile fabrics has emerged as a transformative approach in smart wearable development due to the advantages it offers. However, achieving the desired functionalities while maintaining the fabric's flexibility, wearing comfort, washability, and durability of the printed material remains a challenge. In this study, direct ink writing (DIW) 3D printing technology was employed to print polybutylene succinate (PBS) solutions containing carbon nanotubes (CNTs) onto two types of fabrics. Various properties of the printed fabrics were assessed to examine the influence of printing solutions, fabric structures, and postprinting processes on printing performance. The printed fabrics exhibited excellent electrical conductivity, mechanical strength, gauge factor, and stability under repeated strains. These characteristics highlight their potential for use in smart wearable devices such as strain- and motion-detecting sensors. Analysis of the printed fabric morphologies revealed that factors such as fiber content, yarn structure, and surface roughness of the substrate fabric, along with the rheological properties and surface tension of the printing solution, played key roles in determining the wetting and penetration behaviors of the solution on the substrate. The solution's ability to penetrate and bond with fibers provided the printed fabrics with enhanced washability and abrasion resistance, demonstrating the advantages of DIW printing technology in developing textile-based sensors for smart wearables. Additionally, by using biobased and biodegradable nontoxic Cyrene as the solvent for processing, the printed fabric is safer for smart wearables, and the process is more environmentally friendly than commonly used toxic solvents for PBS.

Antimicrobial protection of fabrics with poly(allylamine hydrochloride)-ZnO coating

Microbial infections are causing numerous deaths and can be found on various surfaces such as fabrics used in healthcare facilities as wound dressings or protective clothing in operating or sterile rooms. The study aimed to determine the difference in antibacterial activity of sheet, sphere, and rod-like ZnO NPs embedded in poly(allylamine hydrochloride) (PAH) multilayers on cotton, nylon, and polyester with Staphylococcus aureus. Additionally, the adhesion of recombinant human SARS-CoV-2 RBD S-protein on the coated materials and the water droplet absorption after placement on the fabric surface were tested. Results demonstrated that PAH/ZnO coating with rod-like NPs achieved the highest antibacterial activity on the cotton fabric, with the Staphylococcus aureus cell viability reduced by more than 99%. ZnO NPs significantly reduced bacterial surface coverage on textiles, particularly on cotton and polyester. The adhesion of SARS-CoV-2 RBD protein was reduced considerably on the coated nylon fabrics due to the change in the material's hydrophobicity and wettability. Due to its better ZnO NP adherence, cotton demonstrated slightly higher antibacterial performance than polyester and nylon, showing potential for wound dressings, especially with the addition of rod-like ZnO NPs. PAH/ZnO coated nylon showed potential for usage in protective clothing in operating and sterile rooms against bacteria, viral adhesion, and aerosol absorption through the fabrics to the skin.

Tannic acid-assisted exfoliation of molybdenum disulfide for enhancing the multifunctional properties of natural rubber latex-coated polycotton fabrics

The development of multifunctional textiles can be achieved through coating techniques. Natural rubber latex (NRL) presents a promising bio-based coating material. Although, NRL can improve the mechanical properties, NRL alone does not provide multifunctionality. Therefore, incorporating filler into NRL is essential to impart additional functionalities to textiles. This study presents a facile method for fabricating multifunctional textiles by combining NRL with tannic acid (TA)-exfoliated molybdenum disulfide (MoS2) nanosheets (MT). MoS2 was exfoliated using TA via sand grinding, and the resulting nanosheets dispersion was incorporated into NRL, which was then applied to polycotton fabric via a single dipping method. Coating with NRL alone lacked functional properties and MoS2 without TA led to aggregation. TA alone also failed to improve certain properties. However, the synergy among NRL, MoS2 and TA significantly improved the mechanical strength, antibacterial properties, hydrophilicity, self-cleaning ability, stain removal efficiency, acid resistance, ultraviolet blocking, and washing durability. These multifunctional coated fabrics hold great potential for application in medical and protective clothing.

Assessment of skin sensitization potential of zinc oxide, aluminum oxide, manganese oxide, and copper oxide nanoparticles through the local lymph node assay: 5-bromo-deoxyuridine flow cytometry method

The advent of nanotechnology has significantly spurred the utilization of nanoparticles (NPs) across diverse sectors encompassing industry, agriculture, engineering, cosmetics, and medicine. Metallic oxides including zinc oxide (ZnO), copper oxide (CuO), manganese oxide (Mn2O3), and aluminum oxide (Al2O3), in their NP forms, have become prevalent in cosmetics and various dermal products. Despite the expanding consideration of these compounds for dermal applications, their potential for initiating skin sensitization (SS) has not been comprehensively examined. An in vivo assay, local lymph node assay: 5-bromo-2-deoxyuridine-flow cytometry method (LLNA: BrdU-FCM) recognized as an alternative testing method for screening SS potential was used to address these issues. Following the OECD TG 442B guidelines, NPs suspensions smaller than 50 nm size were prepared for ZnO and Al2O3 at concentrations of 10, 25, and 50%, and Mn2O3 and CuO at concentrations of 5, 10, and 25%, and applied to the dorsum of each ear of female BALB/c mice on a daily basis for 3 consecutive days. Regarding the prediction of test substance to skin sensitizer if sensitization index (SI)≥2.7, all 4 NPs were classified as non-sensitizing. The SI values were below 2.06, 1.33, 1.42, and 0.99 for ZnO, Al2O3, Mn2O3, and CuO, respectively, at all test concentrations. Although data presented were negative with respect to adverse SS potential for these 4 NPs, further confirmatory tests addressing other key events associated with SS adverse outcome pathway need to be carried out to arrive at an acceptable conclusion on the skin safety for both cosmetic and dermal applications.

Highly Stable Polyimide Composite Nanofiber Membranes with Spectrally Selective for Passive Daytime Radiative Cooling

Passive radiative cooling technology without electric consumption is an emerging sustainability technology that plays a key role in advancing sustainable development. However, most radiative cooling materials are vulnerable to outdoor contamination and thermal/UV exposure, which leads to decreased performance. Herein, we report a hierarchically structured polyimide/zinc oxide (PINF/ZnO) composite membrane that integrates sunlight reflectance of 91.4% in the main thermal effect of the solar spectrum (0.78-1.1 μm), the mid-infrared emissivity of 90.0% (8-13 μm), UV shielding performance, thermal resistance, and ideal hydrophobicity. The comprehensive performance enables the composite membrane to yield a temperature drop of ∼9.3 °C, compared to the air temperature, under the peak solar irradiance of ∼800 W m-2. In addition, the temperature drop of as-obtained composite membranes after heating at 200 °C for 6 h in a nitrogen/air atmosphere can be well maintained at ∼9.0 °C, demonstrating their ideal radiative cooling effect in a high-temperature environment. Additionally, the PINF/ZnO composite membrane shows excellent chemical durability after exposure to the outdoor environment. This work provides a new strategy to integrate chemical durability and thermal resistance with radiative cooling, presenting great potential for passive radiative cooling materials toward practical applications in harsh environments.

Poly(Allylamine Hydrochloride) and ZnO Nanohybrid Coating for the Development of Hydrophobic, Antibacterial, and Biocompatible Textiles

In healthcare facilities, infections caused by Staphylococcus aureus (S. aureus) from textile materials are a cause for concern, and nanomaterials are one of the solutions; however, their impact on safety and biocompatibility with the human body must not be neglected. This study aimed to develop a novel multilayer coating with poly(allylamine hydrochloride) (PAH) and immobilized ZnO nanoparticles (ZnO NPs) to make efficient antibacterial and biocompatible cotton, polyester, and nylon textiles. For this purpose, the coated textiles were characterized with profilometry, contact angles, and electrokinetic analyzer measurements. The ZnO NPs on the textiles were analyzed by scanning electron microscopy and inductively coupled plasma mass spectrometry. The antibacterial tests were conducted with S. aureus and biocompatibility with immortalized human keratinocyte cells. The results demonstrated successful PAH/ZnO coating formation on the textiles, demonstrating weak hydrophobic properties. Furthermore, PAH multilayers caused complete ZnO NP immobilization on the coated textiles. All coated textiles showed strong growth inhibition (2-3-log reduction) in planktonic and adhered S. aureus cells. The bacterial viability was reduced by more than 99%. Cotton, due to its better ZnO NP adherence, demonstrated a slightly higher antibacterial performance than polyester and nylon. The coating procedure enables the binding of ZnO NPs in an amount (<30 µg cm-2) that, after complete dissolution, is significantly below the concentration causing cytotoxicity (10 µg mL-1).

Improved cotton fabrics properties using zinc oxide-based nanomaterials: A review

Zinc oxide nanoparticles (ZnO NPs) have gained significant attention in the textile industry for their ability to enhance the physicochemical properties of fabrics. In recent years, there has been a growing focus on the development of ZnO-based nanomaterials and their applications for cotton and other fabrics. This review paper provides an overview of the synthesis and diverse applications of ZnO-based nanomaterials for textile fabrics, including protection against UV irradiation, bacteria, fungi, microwave, electromagnetic radiation, water, and fire. Furthermore, the study offers the potential of these materials in energy harvesting applications, such as wearable pressure sensors, piezoelectric nanogenerators, supercapacitors, and human energy harvesting. Additionally, we discuss the potential of ZnO-based nanomaterials for environmental cleaning, including water, oil, and solid cleaning. The current research in this area has focused on various materials used to prepare ZnO-based nanocomposites, such as metals/nonmetals, semiconductors, metal oxides, carbon materials, polymers, MXene, metal-organic frameworks, and layered double hydroxides. The findings of this review highlight the potential of ZnO-based nanomaterials to improve the performance of textile fabrics in a range of applications, and the importance of continued research in this field to further advance the development and use of ZnO-based nanomaterials in the textile industry.

A Fast-Response Ultraviolet Phototransistor with a PVK QDs/ZnO Nanowire Heterostructure and Its Application in Pharmaceutical Solute Detection

The sensitivity and photoelectric noise of UV photodetectors are challenges that need to be overcome in pharmaceutical solute detection applications. This paper presents a new device concept for a CsPbBr3 QDs/ZnO nanowire heterojunction structure for phototransistors. The lattice match of the CsPbBr3 QDs and ZnO nanowire reduces the generation of trap centers and avoids carrier absorption by the composite center, which greatly improves the carrier mobility and high detectivity (8.13 × 10¹⁴ Jones). It is worth noting that by using high-efficiency PVK quantum dots as the intrinsic sensing core, the device has a high responsivity (6381 A/W) and responsivity frequency (300 Hz). Thus, a UV detection system for pharmaceutical solute detection is demonstrated, and the type of solute in the chemical solution is estimated by the waveform and the size of the output 2f signals.

Natural bioactive formulations for biodegradable cotton eco-fabrics with antimicrobial and fire-shielding properties

In this study, eco-friendly cotton fabrics with antimicrobial and flame-retardant properties were produced using newly developed bioactive formulations. The new natural formulations combine the biocidal properties of the biopolymer (chitosan (CS)) and essential oil (thyme oil) (EO) with the flame-retardant properties of mineral fillers (silica (SiO₂), zinc oxide (ZnO), titanium dioxide (TiO₂), and hydrotalcite (LDH)). The modified cotton eco-fabrics were analyzed in terms of morphology (optical and scanning electron microscopy (SEM)), color (spectrophotometric measurements), thermal stability (thermogravimetric analysis (TGA)), biodegradability, flammability (micro-combustion calorimetry (MCC)), and antimicrobial characteristics. The antimicrobial activity of the designed eco-fabrics was determined against different kinds of microorganism (S. aureus, E. coli, P. fluorescens, B. subtilis, A. niger, C. albicans). The antibacterial effects and flammability of the materials were found to depend strongly on the compositions of the bioactive formulation. The best results were obtained for the samples of fabric coated with the formulations containing LDH and TiO₂ filler. These samples showed the highest decreases in flammability, with heat release rate (HRR) values of 168 (W/g) and 139 (W/g), respectively, compared to the reference (233 W/g). The samples also showed very good inhibition of growth against of all the studied bacteria.

Low Temperature In Situ Synthesis of ZnO Nanoparticles from Electric Arc Furnace Dust (EAFD) Waste to Impart Antibacterial Properties on Natural Dye-Colored Batik Fabrics

Natural polymer (cellulose)-based fabric was colored using an environmentally friendly natural dye extracted from Jalawe (Terminalia bellirica) in the preparation of Batik fabric, a cultural heritage of Indonesia that is recognized by United Nations Educational, Scientific and Cultural Organization (UNESCO). Despite the significant favorable properties in terms of functions, environmental, and cultural aspects, the combination between natural polymer-based fabric and natural dyes makes the Batik fabric an ideal medium for bacterial growth, leading to lower product quality. In the quest for a sustainable, environmentally friendly, rich-in-culture, yet durable textile, this study aimed at the functionalization of natural dye (ND)-colored Batik fabric with antibacterial ZnO nanoparticles (ZnO NPs) synthesized from Electric Arc Furnace Dust (EAFD) waste. An in situ immobilization process with a Chemical Bath Deposition (CBD) method was explored at a pH range from 6 to 11 at 50 °C. Characterization methods include XRD, XRF, FESEM, EDX, FT-IR, tensile strength measurement, agar diffusion testing, and a CIE L*a*b* scale measurement. The XRD and XRF results showed that pure (>98%) ZnO NPs were formed at pH 11 of the CBD process. FESEM results demonstrated that the pure ZnO NPs either precipitated at the CBD reactor or were immobilized on the cellulose fabric, exhibiting distinct morphology compared to the non-pure ZnO NPs. EDX elemental analysis before and after washing demonstrated the durability of the ZnO NPs attachment, in which 84% of the ZnO NPs remained on the fabric after two washing cycles (equal to 10 cycles of home laundering). The FT-IR spectra provided information on the chemical functional groups, demonstrating the success of the ZnO NPs immobilization on the cellulose fabric through Van der Waals or coordination bonding. Moreover, the in situ immobilization of ZnO NPs enhanced the Batik fabric's tensile strength but reduced its elongation. ZnO NP-functionalized Batik fabric that was treated at pH 10 and pH 11 showed antibacterial activity against Staphylococcus aureus. The CIE L*a*b* scale results showed that the immobilization process affects the color quality of the ND-colored Batik fabric. However, based on organoleptic observations, the color of the Batik fabric that was treated at pH 11 is still acceptable for Jalawe ND-colored Batik fabric.

Husk-like Zinc Oxide Nanoparticles Induce Apoptosis through ROS Generation in Epidermoid Carcinoma Cells: Effect of Incubation Period on Sol-Gel Synthesis and Anti-Cancerous Properties

This study effectively reports the influence of experimental incubation period on the sol-gel production of husk-like zinc oxide nanoparticles (ZNPs) and their anti-cancerous abilities. The surface morphology of ZNPs was studied with the help of SEM. With the use of TEM, the diameter range of the ZNPs was estimated to be ~86 and ~231 nm for ZNP^A and ZNP^B, prepared by incubating zinc oxide for 2 and 10 weeks, respectively. The X-ray diffraction (XRD) investigation showed that ZNPs had a pure wurtzite crystal structure. On prolonging the experimental incubation, a relative drop in aspect ratio was observed, displaying a distinct blue-shift in the UV-visible spectrum. Furthermore, RBC lysis assay results concluded that ZNP^A and ZNP^B both demonstrated innoxious nature. As indicated by MTT assay, reactive oxygen species (ROS) release, and chromatin condensation investigations against the human epidermoid carcinoma (HEC) A431 cells, ZNP^B demonstrated viable relevance to chemotherapy. Compared to ZNP^B, ZNP^A had a slightly lower IC₅₀ against A431 cells due to its small size. This study conclusively describes a simple, affordable method to produce ZNP nano-formulations that display significant cytotoxicity against the skin cancer cell line A431, suggesting that ZNPs may be useful in the treatment of cancer.

Phyto-assisted synthesis of zinc oxide nanoparticles for developing antibiofilm surface coatings on central venous catheters

Medical devices such as Central Venous Catheters (CVCs), are routinely used in intensive and critical care settings. In the present scenario, incidences of Catheter-Related Blood Stream Infections (CRBSIs) pose a serious challenge. Despite considerable advancements in the antimicrobial therapy and material design of CVCs, clinicians continue to struggle with infection-related complications. These complications are often due colonization of bacteria on the surface of the medical devices, termed as biofilms, leading to infections. Biofilm formation is recognized as a critical virulence trait rendering infections chronic and difficult to treat even with 1,000x, the minimum inhibitory concentration (MIC) of antibiotics. Therefore, non-antibiotic-based solutions that prevent bacterial adhesion on medical devices are warranted. In our study, we report a novel and simple method to synthesize zinc oxide (ZnO) nanoparticles using ethanolic plant extracts of Eupatorium odoratum. We investigated its physio-chemical characteristics using Field Emission- Scanning Electron Microscopy and Energy dispersive X-Ray analysis, X-Ray Diffraction (XRD), Photoluminescence Spectroscopy, UV-Visible and Diffuse Reflectance spectroscopy, and Dynamic Light Scattering characterization methods. Hexagonal phase with wurtzite structure was confirmed using XRD with particle size of ∼50 nm. ZnO nanoparticles showed a band gap 3.25 eV. Photoluminescence spectra showed prominent peak corresponding to defects formed in the synthesized ZnO nanoparticles. Clinically relevant bacterial strains, viz., Proteus aeruginosa PAO1, Escherichia coli MTCC 119 and Staphylococcus aureus MTCC 7443 were treated with different concentrations of ZnO NPs. A concentration dependent increase in killing efficacy was observed with 99.99% killing at 500 μg/mL. Further, we coated the commercial CVCs using green synthesized ZnO NPs and evaluated it is in vitro antibiofilm efficacy using previously optimized in situ continuous flow model. The hydrophilic functionalized interface of CVC prevents biofilm formation by P. aeruginosa, E. coli and S. aureus. Based on our findings, we propose ZnO nanoparticles as a promising non-antibiotic-based preventive solutions to reduce the risk of central venous catheter-associated infections.

A Review of Electro Conductive Textiles Utilizing the Dip-Coating Technique: Their Functionality, Durability and Sustainability

The presented review summarizes recent studies in the field of electro conductive textiles as an essential part of lightweight and flexible textile-based electronics (so called e-textiles), with the main focus on a relatively simple and low-cost dip-coating technique that can easily be integrated into an existing textile finishing plant. Herein, numerous electro conductive compounds are discussed, including intrinsically conductive polymers, carbon-based materials, metal, and metal-based nanomaterials, as well as their combinations, with their advantages and drawbacks in contributing to the sectors of healthcare, military, security, fitness, entertainment, environmental, and fashion, for applications such as energy harvesting, energy storage, real-time health and human motion monitoring, personal thermal management, Electromagnetic Interference (EMI) shielding, wireless communication, light emitting, tracking, etc. The greatest challenge is related to the wash and wear durability of the conductive compounds and their unreduced performance during the textiles' lifetimes, which includes the action of water, high temperature, detergents, mechanical forces, repeated bending, rubbing, sweat, etc. Besides electrical conductivity, the applied compounds also influence the physical-mechanical, optical, morphological, and comfort properties of textiles, depending on the type and concentration of the compound, the number of applied layers, the process parameters, as well as additional protective coatings. Finally, the sustainability and end-of-life of e-textiles are critically discussed in terms of the circular economy and eco-design, since these aspects are mainly neglected, although e-textile' waste could become a huge problem in the future when their mass production starts.

Eco-Friendly Approach to Produce Durable Multifunctional Cotton Fibres Using TiO2, ZnO and Ag NPs

The development of durable multifunctional properties is crucial for the production of high-performance technical textiles. In this work, a novel, environmentally friendly and facile method was developed for the chemical modification of cotton fabric by in situ biosynthesis of Ag NPs in the presence of sumac leaf extract as a reducing agent on TiO₂, ZnO and TiO₂ + ZnO previously applied to cotton fibres. The results showed that the presence of TiO₂, ZnO and TiO₂ + ZnO significantly increased the concentrations of the synthesised Ag NPs on the cotton fibres compared to the one-component Ag coating. This resulted in excellent antimicrobial properties of the TiO₂/Ag, ZnO/Ag and TiO₂ + ZnO/Ag composites even after 25 washes. While the TiO₂ and ZnO particles in the composite were incompatible, the synergistic effect among Ag, TiO₂ and ZnO in the composites resulted in excellent UV blocking properties of the coatings before and after 25 washes. Since the biosynthesis of Ag NPs was accompanied by a yellow-brown colouration of the samples, the photocatalytic self-cleaning of the composite coating could not be determined from the photodegradation rate of the coffee stains. This research provides a new environmentally friendly approach to producing durable antimicrobial and UV blocking coatings on cotton fibres.

Preparation, Antimicrobial Properties under Different Light Sources, Mechanisms and Applications of TiO2: A Review

Traditional antimicrobial methods, such as antibiotics and disinfectants, may cause adverse effects, such as bacterial resistance and allergic reactions. Photocatalysts based on titanium dioxide (TiO₂) have shown great potential in the field of antimicrobials because of their high efficiency, lack of pollution, and lack of side effects. This paper focuses on the antimicrobial activity of TiO₂ under different light sources. To improve the photocatalytic efficiency of TiO₂, we can reduce electron-hole recombination and extend the photocatalytic activity to the visible light region by doping with different ions or compounds and compounding with polymers. We can also improve the surface properties of materials, increase the contact area with microorganisms, and further enhance the resistance to microorganisms. In addition, we also reviewed their main synthesis methods, related mechanisms, and main application fields to provide new ideas for the enhancement of photocatalytic microorganism performance and application popularization in the future.

Zinc Oxide Nanoparticles (ZnO NPs) and N-Methylol Dimethyl Phosphonopropion Amide (MDPA) System for Flame Retardant Cotton Fabrics

The aim of the present research work was to develop halogen and formaldehyde-free, durable flame retardant fabric along with multifunctional properties and to find the optimal conditions and parameters. In this research, zinc oxide nanoparticles (ZnO NPs) were grown onto 100% cotton fabric using the sonochemical method. Zinc acetate dihydrate (Zn(CH3COO)2·2H2O) and sodium hydroxide (NaOH) were used as precursors. After ZnO NPs growth, N-Methylol dimethylphosphonopropionamide (MDPA) flame retardant was applied in the presence of 1, 2, 3, 4-butanetetracarboxylic acid (BTCA) as cross-linkers using the conventional pad-dry-cure method. Induced coupled plasma atomic emission spectroscopy (ICP-AES) was used to determine the deposited amount of Zn and phosphorous (P) contents. Scanning electron microscopy (SEM), X-ray powder diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR) were employed to determine the surface morphology and characterization of the developed samples. Furthermore, the thermal degradation of the untreated and treated samples was investigated by thermogravimetric analysis (TGA). Furthermore, the vertical flame retardant test, limiting oxygen index (LOI), ultraviolet protection factor (UPF), and antibacterial activity of samples were examined. The developed samples showed excellent results for flame retardancy (i.e., 39 mm char length, 0 s after flame time, 0 s after glow time), 32.2 LOI, 143.76 UPF, and 100% antibacterial activity.

Green Approaches, Potentials, and Applications of Zinc Oxide Nanoparticles in Surface Coatings and Films

Interest in the use of zinc oxide nanoparticles (ZnO NPs) in surface coatings and films has increased as its incorporation can significantly improve the mechanical and antimicrobial properties of coatings and film solutions. In an effort to produce green or eco-friendly products, the potential use of ZnO NPs biosynthesized from natural resources to replace conventional petroleum-derived polymers has been investigated. This review provides an insight into the growing trend of incorporating ZnO NPs into synthetic or semi-synthetic or bio-based polymeric materials via different synthesis methods as well as its characteristics and potential applications in surface coatings and films. The antimicrobial potential of ZnO NPs to inhibit the growth of various types of microorganisms as well as its use in surface coatings or films to impart antimicrobial activities that prevent the spread of microorganisms, especially the COVID-19 virus, was also discussed.

UV Blocking and Oxygen Barrier Coatings Based on Polyvinyl Alcohol and Zinc Oxide Nanoparticles for Packaging Applications

Photodegradation and oxidation are major causes of the deterioration of food, resulting in darkening, off-flavors, and nutrient deficiency. To reduce this problem, novel functional polymeric materials are being developed to retain food’s light sensitivity. Nanofillers are also used in a polymeric film to produce effective UV blockings and oxygen barrier coatings so that the degradation of the food can be delayed, thereby increasing the shelf life. For this purpose, polyvinyl alcohol coatings were prepared by the incorporation of ZnO nanoparticles. Polyvinyl alcohol is a naturally excellent barrier against oxygen, and the addition of ZnO particles at the nanoscale size has demonstrated effective UV blocking capabilities. In this work, the hydrothermal technique is used to produce ZnO nanoparticles, and these produced particles are then incorporated into the polyvinyl alcohol to produce thin films. These films are characterized in terms of the compositional, macroscopic, microscopic, and optical properties via X-ray diffraction (XRD), FTIR, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA), as well as UV–VIS spectroscopy. ZnO nanoparticles at different concentrations were incorporated into the PVA solution, and the films were processed via the blade coating method. With the addition of ZnO, the oxygen transmission rate (OTR) of pure PVA was not altered and remained stable, and the lowest OTR was recorded as 0.65 cm3/m2·day·bar. Furthermore, the addition of ZnO increased the water contact angle (WCA) of PVA, and the highest WCA was recorded to be around more than 70°. Due to this, water permeability decreased. Additionally, PVA/ZnO films were highly flexible and bendable and maintained the OTR even after going through bending cycles of 20K. Furthermore, the addition of ZnO showed a significant UV blocking effect and blocked the rays below a wavelength of 380 nm. Finally, the optimized films were used for packaging applications, and it was observed that the packaged apple remained fresh and unoxidized for a longer period as compared with the piece of apple without packaging. Thus, based on these results, the PVA/ZnO films are ideally suited for packaging purposes and can effectively enhance the shelf life of food.

Effects of Waste-Derived ZnO Nanoparticles against Growth of Plant Pathogenic Bacteria and Epidermoid Carcinoma Cells

Green synthesis of zinc oxide nanoparticles (ZnO NPs) has recently gained considerable interest because it is simple, environmentally friendly, and cost-effective. This study therefore aimed to synthesize ZnO NPs by utilizing bioactive compounds derived from waste materials, mangosteen peels, and water hyacinth crude extracts and investigated their antibacterial and anticancer activities. As a result, X-ray diffraction analysis confirmed the presence of ZnO NPs without impurities. An ultraviolet–visible absorption spectrum showed a specific absorbance peak around 365 nm with an average electronic band gap of 2.79 eV and 2.88 eV for ZnO NPs from mangosteen peels and a water hyacinth extract, respectively. An SEM analysis displayed both spherical shapes of ZnO NPs from the mangosteen peel extract (dimension of 154.41 × 172.89 nm) and the water hyacinth extract (dimension of 142.16 × 160.30 nm). Fourier transform infrared spectroscopy further validated the occurrence of bioactive molecules on the produced ZnO NPs. By performing an antibacterial activity assay, these green synthesized ZnO NPs significantly inhibited the growth of Xanthomonas oryzae pv. oryzae, Xanthomonas axonopodis pv. citri, and Ralstonia solanacearum. Moreover, they demonstrated potent anti-skin cancer activity in vitro. Consequently, this study demonstrated the possibility of using green-synthesized ZnO NPs in the development of antibacterial or anticancer agents. Furthermore, this research raised the prospect of increasing the value of agricultural waste.

Facile nanostructured zinc oxide coating technique for antibacterial and antifouling air filters with low pressure drop

Air filters effectively filtrate external contaminants including pathogenic bioaerosols; however, they also act as culture sites for the pathogenic bacteria captured in nutrient organic pollutants. Although many researchers have applied various antibacterial coatings to filters, the coating application inevitably increased the pressure drop, leading to the low efficiency and high energy consumption of the purification system. Herein, we report a simple nanostructured zinc oxide (ZnO) coating technique to confer a polypropylene nonwoven filter with superior antibacterial, antifouling and anti-biofilm properties without an additional pressure drop. For aerodynamic coating designs, filters were directly immersed into low concentration precursor solutions to enable the sedimentation of the ZnO sol-gel particles on the filter fibers according to fluid dynamic. The precursor concentration affected the surface topology and so properties of the as-fabricated coating. 0.07 M precursor solution produced a rose-like nanostructured coating exhibiting no pressure-drop increase. The large specific surface area and hydrophobic surface killed and then repelled the attached bacteria effectively. As a result, the bare filter promoted the growth and consequent biofilm formation of the surface bacteria in a favorable environment for the growth of microorganisms, while the coated filter successfully suppressed biofilm development.

Recent Trends in Protective Textiles against Biological Threats: A Focus on Biological Warfare Agents

The rising threats to worldwide security (affecting the military, first responders, and civilians) urge us to develop efficient and versatile technological solutions to protect human beings. Soldiers, medical personnel, firefighters, and law enforcement officers should be adequately protected, so that their exposure to biological warfare agents (BWAs) is minimized, and infectious microorganisms cannot be spread so easily. Current bioprotective military garments include multilayered fabrics integrating activated carbon as a sorptive agent and a separate filtrating layer for passive protection. However, secondary contaminants emerge following their accumulation within the carbon filler. The clothing becomes too heavy and warm to wear, not breathable even, preventing the wearer from working for extended hours. Hence, a strong need exists to select and/or create selectively permeable layered fibrous structures with bioactive agents that offer an efficient filtering capability and biocidal skills, ensuring lightweightness, comfort, and multifunctionality. This review aims to showcase the main possibilities and trends of bioprotective textiles, focusing on metal-organic frameworks (MOFs), inorganic nanoparticles (e.g., ZnO-based), and organic players such as chitosan (CS)-based small-scale particles and plant-derived compounds as bioactive agents. The textile itself should be further evaluated as the foundation for the barrier effect and in terms of comfort. The outputs of a thorough, standardized characterization should dictate the best elements for each approach.

Nanobioremediation: A sustainable approach for the removal of toxic pollutants from the environment

In recent years, the proportion of organic and inorganic contaminants has increased rapidly due to growing human interference and represents a threat to ecosystems. The removal of these toxic pollutants from the environment is a difficult task. Physical, chemical and biological methods are implemented for the degradation of toxic pollutants from the environment. Among existing technologies, bioremediation in combination with nanotechnology is the most promising and cost-effective method for the removal of pollutants. Numerous studies have shown that exceptional characteristics of nanomaterials such as improved catalysis and adsorption properties as well as high reactivity have been subjects of great interest. There is an emerging trend of employing bacterial, fungal and algal cultures and their components, extracts or biomolecules as catalysts for the sustainable production of nanomaterials. They can serve as facilitators in the bioremediation of toxic compounds by immobilizing or inducing the synthesis of remediating microbial enzymes. Understanding the association between microorganisms, contaminants and nanoparticles (NPs) is of crucial importance. In this review, we focus on the removal of toxic pollutants using the cumulative effects of nanoparticles with microbial technology and their applications in different domains. Besides, we discuss how this novel nanobioremediation technique is significant and contributes towards sustainability.

Characterization and Antibacterial Activity Test of Green Synthetic ZnO Nanoparticles Using Avocado (Persea americana) Seed Extract

The ability of cotton fabrics to absorb water creates several problems, such as providing an environment for bacterial growth. Antibacterial properties of textiles can be conducted by coating with nanoparticles with antibacterial activity. This study aimed to synthesize ZnO via green process nanoparticles using avocado seed extract (Persea americana), then characterize and evaluate its antibacterial activity on cotton fabrics. This research began with extracting avocado seed powder with distilled water. Then the avocado seed extract was mixed with Zn(CH3COO)2.2H2O and heated in a water bath at 70°C. The mixture was stirred while NaOH was added until the mixture reached pH 7, 8, and 9. The FTIR measurement of the avocado seed extract showed the presence of free hydroxyl and amino groups that act as reducing agents, capping agents, and stabilizers in the synthesis of ZnO nanoparticles. The XRD pattern of synthesized ZnO nanoparticles was hexagonal. The SEM results showed that the morphology of ZnO nanoparticles was spherical, with a particle size of 19.965 nm. Antibacterial activity was carried out on the cotton cloth coated with ZnO nanoparticles, resulting in an inhibition zone of 1.8 cm against E. coli and 1.97 cm against S. aureus bacteria. This study result indicated that ZnO nanoparticles have antibacterial activity by producing inhibition against E. coli and S. aureus.

Importance of Protocol Design for Suitable Green In Situ Synthesis of ZnO on Cotton Using Aqueous Extract of Japanese Knotweed Leaves as Reducing Agent

This work presents two protocols for the green in situ synthesis of zinc oxide nanoparticles (ZnO-NP) on cotton with the aim to develop sustainable cotton fabric with an ultraviolet protection factor (UPF). The protocols differed in the order of immersing cotton fabric in reactive solutions of three batches, i.e., precursor (0.1 M zinc acetate dihydrate), reducing agent (aqueous extract of Japanese knotweed leaves) and alkali (wood ash waste). The scanning electron microscope (SEM) results showed that ZnO-NP were successfully synthesised on cotton using both protocols; however, only the protocol where cotton was first immersed in alkali, then in the precursor and, lastly, in the reducing agent enabled very high UPF and higher amount of Zn present on the sample. Due to the different order of cotton fabric immersion in the reactive solutions, dissimilar morphology of the ZnO particles was observed, which resulted in different UV blocking abilities of the samples. The antioxidant analysis (DPPH) showed that the natural reducing agent prepared from Japanese knotweed leaves has very high antioxidant activity, which is attributed to phenolic compounds present in the plant. The reflectance spectroscopy results confirmed that the colour yield and colour of the samples did not influence the UPF value. This protocol is an example of green circular economy where waste materials of invasive alien plant species and pellet heating was used as a natural source of phytochemicals, for the direct synthesis of ZnO-NP to develop cotton fabric with UV-protective properties.

A Review on Electrospun Nanofibers Based Advanced Applications: From Health Care to Energy Devices

Electrospun nanofibers have been exploited in multidisciplinary fields with numerous applications for decades. Owing to their interconnected ultrafine fibrous structure, high surface-to-volume ratio, tortuosity, permeability, and miniaturization ability along with the benefits of their lightweight, porous nanofibrous structure, they have been extensively utilized in various research fields for decades. Electrospun nanofiber technologies have paved unprecedented advancements with new innovations and discoveries in several fields of application including energy devices and biomedical and environmental appliances. This review article focused on providing a comprehensive overview related to the recent advancements in health care and energy devices while emphasizing on the importance and uniqueness of utilizing nanofibers. A brief description regarding the effect of electrospinning techniques, setup modifications, and parameters optimization on the nanofiber morphology was also provided. The article is concluded with a short discussion on current research challenges and future perspectives.

Ultra-Fast Growth of ZnO Nanorods on Cotton Fabrics and Their Self-Cleaning and Physiological Comfort Properties

The main aim of the present study was to investigate the effect of microwave irradiation time on the photocatalytic and physiological comfort characteristics of zinc-oxide-nanorod-coated cotton fabrics. An ultra-fast technique was employed to grow the zinc oxide nanorods on cotton fabrics using a microwave-assisted hydrothermal method. The axial (length) and lateral (diameter) growth of the zinc oxide nanorods was observed to increase with microwave irradiation time. The ZnO nanorods uniformly and entirely covered the cotton fibers. The surface morphology, topography and chemical characteristics of the ZnO nanorods were investigated by scanning electron microscopy (SEM), EDS analysis, X-ray diffraction (XRD), atomic force microscopy (AFM) and inductively coupled plasma-optical emission spectrometry (ICP-OES). The degradation of orange II dye under UV light irradiation was observed to assess photocatalytic self-cleaning and solution discoloration ability. The ZnO-nanorod-coated cotton fabrics exhibited excellent photocatalytic activity, as the stains of orange II dye disappeared predominantly within 4 h and the coated fabrics became almost white after 6 h. Analyses of thermal properties, water vapor permeability (WVP), air permeability and stiffness were also performed to investigate the physiological comfort of the ZnO-nanorod-coated fabrics. The thermal conductivity and thermal absorptivity were observed to increase with an increase in the size and density of the ZnO nanorods. Moreover, non-significant reductions in water vapor permeability and air permeability were observed with application of the ZnO nanorods. The stiffness of the ZnO-nanorod-coated cotton fabric increased due to the complete coverage of fibers by the uniform growth of the ZnO nanorods. The ZnO-nanorod-coated cotton fabrics also showed good washing durability and reusability.

Facile In Situ Synthesis of ZnO Flower-like Hierarchical Nanostructures by the Microwave Irradiation Method for Multifunctional Textile Coatings

ZnO nanoparticle-based multifunctional coatings were prepared by a simple, time-saving microwave method. Arginine and ammonia were used as precipitation agents, and zinc acetate dehydrate was used as a zinc precursor. Under the optimized conditions, flower-like morphologies of ZnO aggregates were obtained. The prepared nanopowders were characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and UV/Visible spectroscopy. The developed in situ synthesis with microwave irradiation enabled significant ZnO nanoparticle deposition on cotton fabrics, without additional steps. The functionalized textiles were tested as a photocatalyst in methylene blue (MB) photodegradation and showed good self-cleaning and UV-blocking properties. The coated cotton fabrics exhibited good antibacterial properties against common microbial trains (Staphylococcus aureus, Escherichia coli, and Candida albicans), together with self-cleaning and photocatalytic efficiency in organic dye degradation. The proposed microwave-assisted in situ synthesis of ZnO nanocoatings on textiles shows high potential as a rapid, efficient, environmentally friendly, and scalable method to fabricate functional fabrics.

Functionalization of cellulosic fibers with a kaolinite-TiO2 nano-hybrid composite via a solvothermal process for flame retardant applications

Eco-responsible flame retardant treatments with some resistance to washing are of considerable interest in the sale and applications of technical garments and home textiles. Thus, in the present study, a nano-hybrid composite based on kaolinite-TiO₂ was prepared and incorporated into the fibers of cotton fabric through a more sustainable route compared to existing commercial processes. SEM analyses revealed a mineral covering of the treated cotton fibers, which do not propagate flames when exposed to fire and have a self-extinguishing behavior after the heat source removal. The method proved to be efficient in obtaining a cotton product with high fireproof performance. It was observed that after functionalization, the fabric showed a thermal degradation 41% less at 800 °C, an increase in the residue formation, and a reduction of about 85% in peak heat release measured by PCFC. Some resistance to washing was noticed, and the mechanical resistance of fibers was preserved.

Novel Green In Situ Synthesis of ZnO Nanoparticles on Cotton Using Pomegranate Peel Extract

This work presents the novel and entirely green in situ synthesis of zinc oxide nanoparticles (ZnO-NP) on cotton fabric. Pomegranate peel extract was used as a reducing agent and wood ash extract was used as an alkali source for the formation of ZnO-NP from zinc acetate. Four different synthesis methods, which varied in drying between immersion of fabric in the active solutions for synthesis and the use of padding and ultrasonication, were investigated to evaluate the most suitable one to achieve excellent ultraviolet (UV) protective properties of the functionalized textile. For comparison, the cotton fabrics were also functionalized with each active solution separately or in a combination of two (i.e., Zn-acetate and plant extract). Scanning electron microscopy (SEM), inductively coupled plasma mass spectroscopy (ICP-MS), Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD) analysis, and atomic force microscopy (AFM) confirm the successful formation of ZnO-NP on cotton. Among the synthesis methods, the method that included continuous drying of the samples between immersion in the active solutions for synthesis (Method 4) was found to be the most suitable to deliver uniformly impregnated cotton fibers with numerous small ZnO wurtzite structured crystals and excellent UV protection, with a UV protection factor of 154.0. This research presents an example of a green circular economy where a bio-waste material can be used to produce ZnO-NP directly on cotton at low temperatures and short treatment times without the addition of chemicals and enables the production of cellulosic fabrics with excellent UV protection.

Long-Lasting Photocatalytic and Antimicrobial Activity of Cotton Towels Modified with TiO2 and ZnO Nanoparticles

This study aimed to evaluate the durability of the photocatalytic and antimicrobial activities of ZnO and TiO2 nanoparticles (NPs)-modified 100% cotton terry textiles. SEM-EDX confirmed the long-lasting durability of the washing materials, and TGA analysis revealed that ZnO and TiO2 NPs can be found on the terry fabric surface; however, the amount of NPs decreased 10 times after 15 washes and 1.6 times after the subsequent 15 washes. The efficiency of self-cleaning properties and antimicrobial activity against five microorganisms (Staphylococcus aureus ATCC 6538, Escherichia coli ATCC 10536, Candida albicans ATCC 10231, Aspergillus niger ATCC 16404, and Bacillus subtilis NCAIM 01644) depended on UVA/B radiation intensity. The increase in UVA/B radiation intensity from 400 to 1400 µW/cm2 significantly increases the effectiveness of photocatalysis. Long-lasting self-cleaning properties characterised the tested fabric; however, stronger photocatalytic efficiency was observed in light with a greater intensity of UVA/B radiation. At the UVA/B radiation intensity of 1400 µW/cm2, a biocidal effect (R = 100%) against all tested microorganisms (E. coli, S. aureus. B. subtilis, C. albicans, and A. niger) was observed on the surface of materials. The lower UVA/B radiation intensity (400 µW/cm2) and 30 wash cycles reduce the antimicrobial activity of the material (R = 65.4–99.4%) for B. subtilis, C. albicans, and A. niger. The antimicrobial activity of washed materials modified with TiO2/ZnO nanoparticles can be increased by irradiation with a light bulb (1400 µW/cm2).

One Step In-Situ Synthesis of Zinc Oxide Nanoparticles for Multifunctional Cotton Fabrics

Zinc oxide nanoparticles (ZnO NPs) have acquired great significance in the textile sector due to their impressive efficiency and multifold utilization, such as antimicrobials, UV protection, photo catalytic activity, and self-cleaning. The aim of this work is in-situ growth of ZnO NPs on 100% cotton fabrics with the one-step hydrothermal method for preparation of multifunctional textile with UV protecting, antibacterial, and photo catalytic properties. Sodium hydroxide (NaOH) and Zinc nitrate hexahydrate [Zn(NO₃)₂·6H₂O] were used as reactants for the growth of zinc oxide on the 100% cotton fabrics. The loaded amount of Zn contents on the cotton fabric was determined by using induced coupled plasma atomic emission spectroscopy (ICP-AES). The surface morphological characterization of deposited ZnO NPs was examined, employing scanning electron microscopy (SEM), X-ray powder diffraction (XRD) and, Fourier- transform infrared spectroscopy (FTIR). The characterization results showed the presence of ZnO NPs on cotton fabrics having hexagonal wurtzite crystalline structure. The synthesized ZnO NPs on fabrics exhibited promising results for antibacterial, UV protection, and photo catalytic performance.

Non-Woven Fabrics Based on Nanocomposite Nylon 6/ZnO Obtained by Ultrasound-Assisted Extrusion for Improved Antimicrobial and Adsorption Methylene Blue Dye Properties

Approximately 200,000 tons of water contaminated with dyes are discharged into effluents annually, which in addition to infectious diseases constitute problems that afflict the population worldwide. This study evaluated the mechanical properties, surface structure, antimicrobial performance, and methylene blue dye-contaminant adsorption using the non-woven fabrics manufactured by melt-blowing. The non-woven fabrics are composed of nylon 6 (Ny 6) and zinc oxide nanoparticles (ZnO NPs). The polymer nanocomposites were previously fabricated using variable frequency ultrasound assisted-melt-extrusion to be used in melt-blowing. Energy dispersion spectroscopy (SEM-EDS) images showed a homogeneous dispersion of the ZnO nanoparticles in nylon 6. The mechanical properties of the composites increased by adding ZnO compared to the nylon 6 matrix, and sample Ny/ZnO 0.5 showed the best mechanical performance. All fabric samples exhibited antimicrobial activity against S. aureus and fungus C. albicans, and the incorporation of ZnO nanoparticles significantly improved this property compared to pure nylon 6. The absorption efficiency of methylene blue (MB), during 60 min, for the samples Ny/ZnO 0.05 and Ny/ZnO 0.25 wt%, were 93% and 65%, respectively. The adsorption equilibrium data obeyed the Langmuir isotherm.

Prediction of Skin Sensitization Potential of Silver and Zinc Oxide Nanoparticles Through the Human Cell Line Activation Test

The development of nanotechnology has propagated the use of nanoparticles (NPs) in various fields including industry, agriculture, engineering, cosmetics, or medicine. The use of nanoparticles in cosmetics and dermal-based products is increasing owing to their higher surface area and unique physiochemical properties. Silver (Ag) NPs' excellent broad-spectrum antibacterial property and zinc oxide (ZnO) NPs' ability to confer better ultraviolet (UV) protection has led to their maximal use in cosmetics and dermal products. While the consideration for use of nanoparticles is increasing, concerns have been raised regarding their potential negative impacts. Although used in various dermal products, Ag and ZnO NPs' skin sensitization (SS) potential has not been well-investigated using in vitro alternative test methods. The human Cell Line Activation Test (h-CLAT) that evaluates the ability of chemicals to upregulate the expression of CD86 and CD54 in THP-1 cell line was used to assess the skin sensitizing potential of these NPs. The h-CLAT assay was conducted following OECD TG 442E. NPs inducing relative fluorescence intensity of CD86 ≥ 150% and/or CD54 ≥ 200% in at least two out of three independent runs were predicted to be positive. Thus, Ag (20, 50, and 80 nm) NPs and ZnO NPs were all predicted to be positive in terms of SS possibility using the h-CLAT prediction model. Although further confirmatory tests addressing other key events (KEs) of SS adverse outcome pathway (AOP) should be carried out, this study gave an insight into the need for cautious use of Ag and ZnO NPs based skincare or dermal products owing to their probable skin sensitizing potency.

Towards a higher photostability of ZnO photo-electrocatalysts in the degradation of organics by using MMO substrates

In this work, it is proposed a novel strategy to increase the photostability of the ZnO photoelectrocatalyst under prolonged light irradiation, without the addition or deposition of metals and/or semiconductor oxides during their synthesis. This strategy is based on the use of a mixed metal oxide (MMO-Ru_0.3Ti_0.7O₂) coating as the substrate for the electrodeposition of ZnO. To assess it, the electrodeposition of ZnO films on Ti and Ti/MMO substrates and the photoelectrocatalytic activity of these materials for the degradation of the herbicide clopyralid were studied. The results showed that the substrate directly influenced the photo-stability of the ZnO film. Under the incidence of UV light and polarization, the novel Ti/MMO/ZnO electrode showed greater photocurrent stability as compared to Ti/ZnO, which is a very important outcome because the behavior of these electrodes was similar when compared in terms of the degradation of clopyralid. Single electrolysis was not able to degrade efficiently clopyralid at the different potentials studied. However, the irradiation of UV light on the polarized surface of the Ti/ZnO and Ti/MMO/ZnO electrodes increased markedly the degradation rate of clopyralid. A synergistic effect was observed between light and electrode polarization, since the rate of degradation of clopyralid was twice as high in photoelectrocatalysis (PhEC) than in photocatalysis (PhC) and different intermediates were formed. From these results, mechanisms of degradation of clopyralid for the PhC and PhEC systems with the Ti/ZnO and Ti/MMO/ZnO electrodes were presented. Therefore, the Ti/MMO/ZnO electrode could be a cheap and simple alternative to be applied in the efficient photodegradation of organic pollutants, presenting the great advantage of having a facile synthesis and high capacity to work at relatively low potentials.

Recent Advances in the Plasma-Assisted Synthesis of Zinc Oxide Nanoparticles

An overview of recent work on the low-temperature plasma-assisted synthesis of zinc oxide (ZnO) nanoparticles is presented and interpreted in terms of gas-phase and surface reactions with illustrated examples. The thermodynamical nonequilibrium conditions allow the formation of chemically reactive species with a potential energy of several eV, which readily interact with the Zn precursors and initiate reactions leading to the formation of nanoparticles or nanowires. The high-quality nanowires were synthesized from Zn powders only upon interaction with moderately ionized plasma in a narrow range of plasma parameters. This technique is promising for the synthesis of large quantities of nanowires with aspect ratios well above 10, but the exact range of parameters remains to be determined. Apart from the ex situ techniques, the ZnO nanoparticles can be synthesized by depositing a film of precursors (often Zn salts or Zn-containing organometallic compounds) and exposing them to oxygen plasma. This technique is useful for the synthesis of well-adherent ZnO nanoparticles on heat-sensitive objects but requires further scientific validation as it often leads to the formation of a semicontinuous ZnO film rather than nanoparticles. Both low-pressure and atmospheric plasmas are useful in converting the precursor film into ZnO nanoparticles despite completely different mechanisms.

A novel synthetic approach to produce cellulose-based woven scaffolds impregnated with bioactive glass for bone regeneration

Tissue-engineering has become the best alternative solution for replacing the damaged tissues. However, the cost of scaffold materials is still a big challenge, so the development of cost-effective scaffolds is highly encouraged. In this research, different types of cotton textile-scaffolds as a cellulosic material were developed to be utilized as a substrate for cells proliferation. They were loaded with bioactive glass (BG) doped with silver nanoparticles (AgNPs). The effect of the loaded materials on the physicochemical and mechanical characteristics of the cellulosic textile scaffolds was investigated by means of FTIR, contact angle, physical and mechanical properties of the cotton fabrics, in addition to assessing their antimicrobial activity. Moreover, the biomineralization was evaluated after soaking in Simulated Body Fluid (SBF) using ICP and SEM accessorized with EDX. Cells proliferation capacities of the developed cellulosic woven-scaffolds were assessed against MG63 cell line at different incubation times. The physicochemical and mechanical features of these fabrics demonstrated a positive influence for the existence of BG impregnation, especially those doped with AgNPs. The antimicrobial features were also affirmed for the cellulosic scaffolds. More pronounced influence was observed on the biomineralization of the scaffold impregnated with BG doped with 0.5% Ag. The percentages of proliferated cells were very close to negative control (100% ± 10). This approach offers a novel and affordable alternative cellulosic woven-scaffolds for bone regeneration.

Surface Modification of Basalt Fibres with ZnO Nanorods and Its Effect on Thermal and Mechanical Properties of PLA-Based Composites

The composites based on basalt fibres and poly(lactic acid) (PLA) show promising applications in biomedical and automotive fields, but their mechanical performance is still largely hindered by poor interfacial properties. Zinc oxide nanorods have been successfully used to tune the PLA/basalt fibre interface by growing them on commercially available basalt fabrics. The hierarchical fibres significantly enhanced the mechanical properties of PLA-based composites, especially their flexural strength and stiffness. These values are 26% and 22% higher than those of unmodified basalt/PLA composites, and 24% and 34% higher than those of glass/PLA composites used as a baseline. The increase in tensile and flexural properties hinges on the mechanical interlocking action promoted by ZnO nanorods and on the creation of a compact transcrystallinity structure. A degradation of PLA matrix was detected but it was positively counteracted by the better interfacial stress transfer. This study offers a novel approach for modifying the fibre-matrix interface of biocomposites intended for high-performance applications.

Graphene Oxide Coated Zinc Oxide Core–Shell Nanofibers for Enhanced Photocatalytic Performance and Durability

Recently, heterogeneous structured semiconductor photocatalysts have received significant interest in promoting global cleaning from the environmental pollution. Herein, we report the synthesis of graphene oxide (GO) wrapped zinc oxide (ZnO) core–shell nanofibers (ZnO@G CSNFs) by the simple core–shell electrospinning and subsequent annealing for efficient photocatalytic performance and stability. The heterostructured catalyst consisted of ZnO forming an enclosed core part while the GO was positioned on the surface, serving as a protective shell. Field emission scanning electron microscopy, high-resolution transmission electron microscopy and X-ray diffraction were used to confirm the synthesis of the desired product. Enhanced photocatalytic activity ZnO@G CSNFs was found compared to the corresponding ZnO NFs. Similarly, incorporation of GO into the ZnO nanofiber in a core–shell format significantly suppressed the photocorrosion. This study highlights the usefulness of using GO as the coating material to boost the photocatalytic performance of ZnO-based photocatalysts.

Sustainable Use of Nanomaterials in Textiles and Their Environmental Impact

At present, nanotechnology is a priority in research in several nations due to its massive capability and financial impact. However, due to the uncertainties and abnormalities in shape, size, and chemical compositions, the existence of certain nanomaterials may lead to dangerous effects on the human health and environment. The present review includes the different advanced applications of nanomaterials in textiles industries, as well as their associated environmental and health risks. The four main textile industry fields using nanomaterials, nanofinishing, nanocoatings, nanofibers, and nanocomposites, are analyzed. Different functional textiles with nanomaterials are also briefly reviewed. Most textile materials are in direct and prolonged contact with our skin. Hence, the influence of carcinogenic and toxic substances that are available in textiles must be comprehensively examined. Proper recognition of the conceivable benefits and accidental hazards of nanomaterials to our surroundings is significant for pursuing its development in the forthcoming years. The conclusions of the current paper are anticipated to increase awareness on the possible influence of nanomaterial-containing textile wastes and the significance of better regulations in regards to the ultimate disposal of these wastes.

Influence of surfactant-tailored Mn-doped ZnO nanoparticles on ROS production and DNA damage induced in murine fibroblast cells

The present study concerns the in vitro oxidative stress responses of non-malignant murine cells exposed to surfactant-tailored ZnO nanoparticles (NPs) with distinct morphologies and different levels of manganese doping. Two series of Mn-doped ZnO NPs were obtained by coprecipitation synthesis method, in the presence of either polyvinylpyrrolidone (PVP) or sodium hexametaphosphate (SHMTP). The samples were investigated by powder X-ray Diffraction, Transmission Electron Microscopy, Fourier-Transform Infrared and Electron Paramagnetic Resonance spectroscopic methods, and N₂ adsorption-desorption analysis. The observed surfactant-dependent effects concerned: i) particle size and morphology; ii) Mn-doping level; iii) specific surface area and porosity. The relationship between the surfactant dependent characteristics of the Mn-doped ZnO NPs and their in vitro toxicity was assessed by studying the cell viability, intracellular reactive oxygen species (ROS) generation, and DNA fragmentation in NIH3T3 fibroblast cells. The results indicated a positive correlation between the specific surface area and the magnitude of the induced toxicological effects and suggested that Mn-doping exerted a protective effect on cells by diminishing the pro-oxidative action associated with the increase in the specific BET area. The obtained results support the possibility to modulate the in vitro toxicity of ZnO nanomaterials by surfactant-controlled Mn-doping.

Structure and Properties of ZnO Coatings Obtained by Atomic Layer Deposition (ALD) Method on a Cr-Ni-Mo Steel Substrate Type

This paper aimed to investigate the structure and physicochemical and tribological properties of ZnO coatings deposited by ALD on 316L stainless steel for biomedical applications. To obtain ZnO films, diethylzinc (DEZ) and water were used as ALD precursors. Zinc oxide layers were deposited at the same temperature of 200 °C using three types of ALD cycles: 500, 1000 and 1500. The structure and morphology of ZnO coatings were examined using SEM and AFM microscopes. The XRD and GIXRD methods were used for the phase analysis of the obtained coatings. To determine the resistance to pitting corrosion, potentiodynamic investigations and impedance spectroscopy were conducted in a Ringer solution at a temperature of 37 °C. The obtained results showed that the number of ALD cycles had a significant impact on the structure, morphology and corrosion resistance of the ZnO layers. It was found that after increasing the coating thickness of the ZnO on the material, its electrochemical properties determining the corrosion resistance also increased. Moreover, on the basis of the ball-on-plate tribological investigations, we found a significant reduction in the friction coefficient of the samples with the investigated coatings in relation to the noncoated substrates.

Interactions of Zinc Oxide Nanostructures with Mammalian Cells: Cytotoxicity and Photocatalytic Toxicity

This article presents a state-of-the-art review and analysis of literature studies on the morphological structure, fabrication, cytotoxicity, and photocatalytic toxicity of zinc oxide nanostructures (nZnO) of mammalian cells. nZnO with different morphologies, e.g., quantum dots, nanoparticles, nanorods, and nanotetrapods are toxic to a wide variety of mammalian cell lines due to in vitro cell-material interactions. Several mechanisms responsible for in vitro cytotoxicity have been proposed. These include the penetration of nZnO into the cytoplasm, generating reactive oxygen species (ROS) that degrade mitochondrial function, induce endoplasmic reticulum stress, and damage deoxyribonucleic acid (DNA), lipid, and protein molecules. Otherwise, nZnO dissolve extracellularly into zinc ions and the subsequent diffusion of ions into the cytoplasm can create ROS. Furthermore, internalization of nZnO and localization in acidic lysosomes result in their dissolution into zinc ions, producing ROS too in cytoplasm. These ROS-mediated responses induce caspase-dependent apoptosis via the activation of B-cell lymphoma 2 (Bcl2), Bcl2-associated X protein (Bax), CCAAT/enhancer-binding protein homologous protein (chop), and phosphoprotein p53 gene expressions. In vivo studies on a mouse model reveal the adverse impacts of nZnO on internal organs through different administration routes. The administration of ZnO nanoparticles into mice via intraperitoneal instillation and intravenous injection facilitates their accumulation in target organs, such as the liver, spleen, and lung. ZnO is a semiconductor with a large bandgap showing photocatalytic behavior under ultraviolet (UV) light irradiation. As such, photogenerated electron-hole pairs react with adsorbed oxygen and water molecules to produce ROS. So, the ROS-mediated selective killing for human tumor cells is beneficial for cancer treatment in photodynamic therapy. The photoinduced effects of noble metal doped nZnO for creating ROS under UV and visible light for killing cancer cells are also addressed.

Electrodeposited Biocoatings, Their Properties and Fabrication Technologies: A Review

Coatings deposited under an electric field are applied for the surface modification of biomaterials. This review is aimed to characterize the state-of-art in this area with an emphasis on the advantages and disadvantages of used methods, process determinants, and properties of coatings. Over 170 articles, published mainly during the last ten years, were chosen, and reviewed as the most representative. The most recent developments of metallic, ceramic, polymer, and composite electrodeposited coatings are described focusing on their microstructure and properties. The direct cathodic electrodeposition, pulse cathodic deposition, electrophoretic deposition, plasma electrochemical oxidation in electrolytes rich in phosphates and calcium ions, electro-spark, and electro-discharge methods are characterized. The effects of electrolyte composition, potential and current, pH, and temperature are discussed. The review demonstrates that the most popular are direct and pulse cathodic electrodeposition and electrophoretic deposition. The research is mainly aimed to introduce new coatings rather than to investigate the effects of process parameters on the properties of deposits. So far tests aim to enhance bioactivity, mechanical strength and adhesion, antibacterial efficiency, and to a lesser extent the corrosion resistance.